9. Changeable Fixture
|
|
|
- Ilene Barker
- 9 years ago
- Views:
Transcription
1 9. Changeable Fixture 1. Mechanical Fixture Serie Mechanical Fixture Serie Mechanical Fixture Serie Mechanical Fixture Serie Pneumatical Fixture Serie HF Pneumatic Fixture Serie Mech. Changeable Fixture Serie Vacuum Changeable Fixture Serie Storage Box
2 Mechanical Fixture WA-M-12xx Technical despription small changeable fixture with parallel mechanical pressure unit it can be opened during the debugging (1250/1251) interface with 192 contacts (1250/1251) lower-cost because of the changeable unit individual upgrading through the unit assembly system customer specified interface fixture is suitable for about 300N (200 probes with 1,5N spring force) changeable plates / raise of case are not included in the fixture; order separately optional locking device with magnet Fixture: Outside Working area: Probe plate: Moving plate: Holddown dimensions: plate: Holddown element: WA-M x190x190mm 160x100mm WA-KTP-100 WA-PAP-100 WA-AP-100 WA-AE-100 WA-M x330x220mm 320x100mm WA-KTP-1250 WA-PAP-1250 WA-AP-1250 WA-AE-1250 WA-M x330x220mm 160x100mm WA-KTP-100 WA-PAP-100 WA-AP-100 WA-AE-100 WA-M-1251-T 490x330x220mm 2x 160x100mm 2x WA-KTP-100 2x WA-PAP-100 2x WA-AP-100 2x WA-AE-100 updated: Dec Subject to technical modifications Seite 1
3 Mechanical Fixture Small fixture with parallel closing pressure unit max. working area: 160x100mm, outside dimensions: 250x190x190mm WA-M-1200 Small fixture with parallel closing pressure unit max. working area: 320x100mm, outside dimensions: 490x330x220mm WA-M-1250 Small fixture with parallel closing pressure unit max. working area: 160x100mm, outside dimensions: 490x330x220mm WA-M-1251 Small fixture with parallel closing pressure unit max. working area: 2x 160x100mm, outside dimensions: 490x330x220mm WA-M-1251-T Probe plate interface for 2 Sub-D-connectors (9 to 25pole) (not included) max. working area: 160x100mm, outside dimensions: 190x130mm, approx. 10mm thick WA-KTP-100 updated: Dec Subject to technical modifications Seite 2
4 Mechanical Fixture Probe plate interface for 2 Sub-D-connectors (9 to 25pole) (not included) max. working area: 320x100mm, outside dimensions: 380x130mm, approx. 10mm thick WA-KTP-1250 Moving plate made of EGS-AS; spring-probes for UUT, with 8 distance stoppers (3mm) max. working area: 160x100mm; outside dimensions: 190x110mm, approx. 5mm thick WA-PAP-100 Moving plate made of EGS-AS; spring-probes for UUT, with 8 distance stoppers (3mm) max. working area: 320x100mm; outside dimensions: 380x110mm, approx. 5mm thick WA-PAP-1250 Holddown plate made of ESD acrylic plastic, approx. 10mm thick; inkl. screws, max. working area : 160x100mm, outside dimensions: 190x110mm WA-AP-100 Holddown plate made of ESD acrylic plastic, approx. 10mm thick; inkl. screws, max. working area : 320x100mm, outside dimensions: 380x110mm WA-AP-1250 updated: Dec Subject to technical modifications Seite 3
5 Mechanical Fixture Holddown element crosshead with 4 heigh-adjustable pushdown fingers, mounting material incl. WA-AE-100 Holddown element crosshead with 4 heigh-adjustable pushdown fingers, mounting material incl. WA-AE-1250 Tooling Pins (Set) 2 Pins for holddown plate and moving plate; (use only for probing on the top side) WA-FB-70 Spring probes for UUT 3N sockets incl., spring force 3N; extended height: 13,3mm point style: 4mm WA-GPA-13-3N Spring probes for UUT 6N sockets incl., spring force 6N; extended height 13,3mm poing style: 4mm WA-GPA-13-6N updated: Dec Subject to technical modifications Seite 4
6 Mechanical Fixture Spring probes for UUT 3N sockets incl., spring force 3N; extended height 13,3mm point style: 3mm (plastic) WA-GPA-13-3N-K Spring probes for UUT 6N sockets incl., spring force 6N; extended height 13,3mm point style: 3mm (plastic) WA-GPA-13-6N-K Locking device with holding magnet (24 V DC) WA-M-1200-VM updated: Dec Subject to technical modifications Seite 5
7 Mechanical Fixtures WA-M-1400 Fixture specification - - mechanical changeable fixture with pressure unit - - Outside dimensions: 530 x mm - - Max. working area: 350 x 230 mm - - Lower-cost through the changeable unit - - Individuell completion through the unit assembly system - - Fast change of the probe plate and the pushdown plate - - Self-closing interface through the connectors - - deskform for easy handling - - Customer specified interface - - Case can be opened during the debugging - - Probe plate and pushdown plate are not included - - Various accessoires Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
8 Accessoires for WA-M-1400 Tech. Beschreibung: Kontaktträgerplatte Kontaktträger-Platte Probe plate inkl. 192 pole interner internal 192 poliger interface incl. Schnittstelle. Outside dimensions: Außenmaß: 400 x 270 mm 400 x 270 mm Nutzfläche: Working area: x 230 x 230 mm mm Tech. Beschreibung: Andruckplatte Holddown plate aus made ESD of - ESD Plexiglas acrylic plastic ( 15 mm) (15 mm) Außenmaß: Outside dimensions: 407 x 240 mm 407 x 240 mm Mechanical Fixtures Bestell Nummer: WA-KTP-400 Bestell Nummer: WA-AP-400 Tech. Beschreibung: Andruckelement, Holddown, Traverse mit Traverse crosshead drei höhenverstellbaren mit with drei 3 höhenverstellbaren adjustable pushdown Niederhaltern fingers, inkl.befestigungsmaterial mounting incl. Länge Lenght: 408 height Niederhaltern mm Tech. Beschreibung: Hülsenschutzplatte Prüflingsauflageplatte Protecting plate for sockets, for für inkl. WA-KTP gefederter Auflagen, Distanzstoppern ( 3mm ) Nutzfläche: 350 x 230 mm Bestell Nummer: WA-AE-400 Bestell Nummer: WA-HSP-400 Tech. Beschreibung: Gefederte Hülsenschutzplatte Raise of case Prüflingsauflage mit für Height: WA-KTP-400 3N inkl. 90 mm Montage-Hülse Höhe ausgefedert 13,3 mm Kopf-Drm. 4mm Nickel Tech. Beschreibung: Gefederte Schnittstellenerweiterung Spring probes Prüflingsauflage for UUT mit seating, 4 x 3N 96 inkl. pol. sockets für Montage-Hülse incl., Höhe Kontaktträgerplatte spring ausgefedert force 3N 13,3 Expanded mm WA-KTP-400 height: 13,3 mm Kopf-Drm. Point style: 3mm 4 mm Kunststoff (nickel) Bestell Nummer: MFG-530-raise of case Bestell Nummer: WA-GPA-13-3N Tech. Beschreibung: Gehäuseerhöhung Schnittstellenerweiterung Spring probes for UUT Höhe 4 seating, x 9690 pol. sockets mm incl., für spring Grundgerät force 3N WA-M-1500 Expanded height: 13,3mm Point style: OD 3 mm (plastic) Bestell Nummer: WA-GPA-13-3N-K Bestell Nummer: Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
9 Accessoires for WA-M-1400 Tech. Beschreibung: Kontaktträgerplatte Kontaktträger-Platte Probe plate inkl. 192 pole interner internal 192 poliger interface incl. Schnittstelle. Outside dimensions: Außenmaß: 400 x 270 mm 400 x 270 mm Nutzfläche: Working area: x 230 x 230 mm mm Tech. Beschreibung: Andruckplatte Holddown plate aus made ESD of - ESD Plexiglas acrylic plastic ( 15 mm) (15 mm) Außenmaß: Outside dimensions: 407 x 240 mm 407 x 240 mm Mechanical Fixtures Bestell Nummer: WA-KTP-400 Bestell Nummer: WA-AP-400 Tech. Beschreibung: Andruckelement, Holddown, Traverse mit Traverse crosshead drei höhenverstellbaren mit with drei 3 höhenverstellbaren adjustable pushdown Niederhaltern fingers, inkl.befestigungsmaterial mounting incl. Länge Lenght: 408 height Niederhaltern mm Tech. Beschreibung: Hülsenschutzplatte Prüflingsauflageplatte Protecting plate for sockets, for für inkl. WA-KTP gefederter Auflagen, Distanzstoppern ( 3mm ) Nutzfläche: 350 x 230 mm Bestell Nummer: WA-AE-400 Bestell Nummer: WA-HSP-400 Tech. Beschreibung: Gefederte Hülsenschutzplatte Raise of case Prüflingsauflage mit für Height: WA-KTP-400 3N inkl. 90 mm Montage-Hülse Höhe ausgefedert 13,3 mm Kopf-Drm. 4mm Nickel Tech. Beschreibung: Gefederte Schnittstellenerweiterung Spring probes Prüflingsauflage for UUT mit seating, 4 x 3N 96 inkl. pol. sockets für Montage-Hülse incl., Höhe Kontaktträgerplatte spring ausgefedert force 3N 13,3 Expanded mm WA-KTP-400 height: 13,3 mm Kopf-Drm. Point style: 3mm 4 mm Kunststoff (nickel) Bestell Nummer: MFG-530-raise of case Bestell Nummer: WA-GPA-13-3N Tech. Beschreibung: Gehäuseerhöhung Schnittstellenerweiterung Spring probes for UUT Höhe 4 seating, x 9690 pol. sockets mm incl., für spring Grundgerät force 3N WA-M-1500 Expanded height: 13,3mm Point style: OD 3 mm (plastic) Bestell Nummer: WA-GPA-13-3N-K Bestell Nummer: Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
10 Mechanical Fixtures WA-M-1401 Fixture specification - Outside dimensions : 280 x 430 x 200 mm - Max. working area : 220 x 115 mm - deskform for easy handling - Lower-cost through the changeable unit - Individuell completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Self-closing interface through the connectors - Costumer specified interface - Case can be opened during the debugging - Various accessories - Probe plate and pushdown plate are not included Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
11 Mechanical Fixtures Accessories for WA-M-1401 Changeable probe plate, 96 pole internal interface incl. Outside dimensions: 270 x 140 mm SWpecification: Holddown plate made of ESD acrylic plastic (10mm) Outside dimensions: Working area: 220x110 mm 230 x 160 mm WA-KTP-140 WA-AP-140 Holddown element, crosshead with 3 height-adjustable pushdown fingers, mounting material incl. Raise of casefor WA-M-1401 Height: 45 mm Length: 160 mm WA-AE-140 MFG-280-Raise of case Spring probes for UUT seating, socket incl. Expanded height: 13,3 mm WA-GPA-13-3N Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
12 Mechanical Fixtures WA-M-1401 Fixture specification - Outside dimensions : 280 x 430 x 200 mm - Max. working area : 220 x 115 mm - deskform for easy handling - Lower-cost through the changeable unit - Individuell completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Self-closing interface through the connectors - Costumer specified interface - Case can be opened during the debugging - Various accessories - Probe plate and pushdown plate are not included Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
13 Mechanical Fixtures Accessories for WA-M-1401 Changeable probe plate, 96 pole internal interface incl. Outside dimensions: 270 x 140 mm SWpecification: Holddown plate made of ESD acrylic plastic (10mm) Outside dimensions: Working area: 220x110 mm 230 x 160 mm WA-KTP-140 WA-AP-140 Holddown element, crosshead with 3 height-adjustable pushdown fingers, mounting material incl. Raise of casefor WA-M-1401 Height: 45 mm Length: 160 mm WA-AE-140 MFG-280-Raise of case Spring probes for UUT seating, socket incl. Expanded height: 13,3 mm WA-GPA-13-3N Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
14 Mechanical Fixture WA-M-15xx Technical despription parallel mechanical pressure unit lower-cost because of the changeable unit individual upgrading through the unit assembly system interface with contacts or probe-interface fixture is suitable for about 300N (200 probes with 1,5N spring force) customer specified interface case can be opened during the debugging changeable plates / raise of case are not included in the fixture; order separately various accessoires Fixture: Outside Working area: Probe plate: Moving plate: Holddown dimensions: plate: Holddown element: WA-M x450x240mm 350x230mm WA-KTP-400 WA-PAP-400 WA-AP-400 WA-AE-400 WA-M-1500-I 530x450x240mm 330x180mm WA-KTP-400-I WA-PAP-400-I WA-AP-400 WA-AE-400 WA-M x450x240mm 205x110mm WA-KTP-140 WA-PAP-140 WA-AP-140 WA-AE-140 WA-M-1501-I 280x450x240mm 180x110mm WA-KTP-140-I WA-PAP-140-I WA-AP-140 WA-AE-140 WA-M-1501-I-T 560x450x240mm 2x 180x110mm 2x WA-KTP-140-I 2x WA-PAP-140-I 2x WA-AP-140 2x WA-AE-140 WA-M-1501-T 560x450x240mm 2x 205x110mm 2x WA-KTP-140 2x WA-PAP-140 2x WA-AP-140 2x WA-AE-140 WA-M x510x250mm 520x295mm WA-KTP-410 WA-PAP-410 WA-AP-410 WA-AE-410 WA-M-1510-I 740x510x250mm 520x250mm WA-KTP-410-I WA-PAP-410-I WA-AP-410 WA-AE-410 WA-M-1511-I-T 740x510x250mm 2x 260x160mm 2x WA-KTP-210-I 2x WA-PAP-210-I 2x WA-AP-210 2x WA-AE-210 WA-M-1511-T 740x510x250mm 2x 295x180mm 2x WA-KTP-210 2x WA-PAP-210 2x WA-AP-210 2x WA-AE-210 updated: Dec Subject to technical modifications Seite 1
15 Mechanical Fixture Fixture with parallel closing pressure unit incl. 192pole internal interface max. working area: 350x230 mm WA-M-1500 Fixture with parallel closing pressure unit for FKS-IF incl. mounting support for internal interface with max. 1020Pins max. working area: 330x180mm WA-M-1500-I Fixture with parallel closing pressure unit incl. 96 pole internal interface max. working area: 205x110 mm WA-M-1501 Fixture with parallel closing pressure unit for FKS-IF incl. mounting support for internal interface with max. 510Pins max. working area: 180x110 mm WA-M-1501-I Mechanical Tandem Fixture for FKS-IF with two separate parallel mechanical pressure units WA-M-1501 max. working area: 2x 180x110mm; incl. mounting supports for int. Interface with max. 510Pins WA-M-1501-I-T updated: Dec Subject to technical modifications Seite 2
16 Mechanical Fixture Mechanical Tandem Fixture with two separate parallel mechanical pressure units WA-M-1501 max. working area: 2x 205x110mm; incl. 96 pole internal interface WA-M-1501-T Fixture with parallel closing pressure unit incl. 4x96pole internal interface max. working area: 520x295 mm outside dimensions: 740x510x250mm WA-M-1510 Fixture with parallel closing pressure unit for FKS-IF incl. mounting support for internal interface with 1020Pins, expandable to max. 2040Pins max. working area: 520x250mm; outside dimensions: 740x510x250mm WA-M-1510-I Mechanical Tandem Fixture for FKS-IF with two separate parallel mechanical pressure units WA-M-1511, outside dimensions: 740x510x250mm max. working area: 2x 260x160mm; incl. mounting supports for int. Interface with max. 512Pins WA-M-1511-I-T Mechanical Tandem Fixture with two separate parallel mechanical pressure units WA-M-1511 outside dimensions: 740x510x250mm; max. working area: 2x 295x180mm; incl. 96 pole internal interface WA-M-1511-T updated: Dec Subject to technical modifications Seite 3
17 Mechanical Fixture Probe plate CEM1; incl. 192pole internal interface max. working area: 350x230mm, outside dimensions: 400x270mm, approx. 10mm thick WA-KTP-400 Probe plate for FKS-IF incl. mounting support for internal interface with max. 1020Pins max. working area: 330x180mm WA-KTP-400-I Probe plate incl. 96pole internal interface max. working area: 205x110mm WA-KTP-140 Probe plate for FKS-IF incl. mounting support for internal interface with max. 510Pins max. working area: 180x110 mm WA-KTP-140-I Probe plate CEM1; incl. 4x96pole internal interface max. working area. 520x295mm outside dimensions: 570x335mm, approx. 10mm thick WA-KTP-410 updated: Dec Subject to technical modifications Seite 4
18 Mechanical Fixture Probe plate for FKS-IF for WA-M-1510-I / WA-P-3010-I; incl. mounting support for internal interface with 1020Pins, expandable to 2040Pins max. working area: 520x250mm; outside dimensions: 570x335mm WA-KTP-410-I Probe plate for FKS-IF incl. mounting support for internal interface with 510Pins max. working area: 260x160 mm WA-KTP-210-I Probe plate incl. 96pole internal interface max. working area: 295x180mm; outside dimensions: 336x209mm WA-KTP-210 Moving plate spring-mounted, 6 spring-probes for UUT incl., with distance stoppers (3mm) max. working area: 350x230mm, outside dimensions: 400x254mm, approx. 5mm thick WA-PAP-400 Moving plate made of EGS-AS; incl. 10 distance stoppers (3mm) max. working area: 330x180mm, outside dimensions: 400x270mm, approx. 5mm thick WA-PAP-400-I updated: Dec Subject to technical modifications Seite 5
19 Mechanical Fixture Moving plate made of EGS-AS; 6 spring-probes for UUT incl., with distance stoppers (3mm) max. working area: 205x110 mm; outside dimensions: 270x140mm, approx. 5mm thick WA-PAP-140 Moving plate made of EGS-AS; incl. 10 distance stoppers (3mm) max. working area: 180x110mm, outside dimensions: 270x140mm, approx. 5mm thick WA-PAP-140-I Moving plate approx. 5mm thick, 8 spring-probes for UUT incl. and 15 distance stoppers 02 (3mm), made of EGS-619-AS-COMP Var. 2, max. product area: 520x295mm, outside dimensions: 570x331mm WA-PAP-410 Moving plate for WA-M-1510-I / WA-P-3010-I; made of EGS-AS incl. 10 distance stoppers (3mm) max. working area: 520x250 mm; outside dimensions : 570x335mm; approx. 5mm thick WA-PAP-410-I Moving plate made of EGS-AS; incl. 10 distance stoppers (3mm) and 4 spring probes for UUT max. working area: 260x160 mm; outside dimensions: 336x209mm, approx. 5mm thick WA-PAP-210-I updated: Dec Subject to technical modifications Seite 6
20 Mechanical Fixture Moving plate made of EGS-AS; 6 spring-probes for UUT incl. and 10 distance stoppers (3mm) max. working area: 295x180mm; outside dimensions: 332x209mm, approx. 5mm thick WA-PAP-210 Holddown plate made of ESD acrylic plastic, approx. 15mm thick, outside dimensions : 407x240mm max. working area: 350x230mm; incl. 6pcs pushdown fingers M3x30 PA WA-AP-400 Holddown plate made of ESD acrylic plastic, approx. 10mm thick, max. working area: 205x110mm; outside dimensions: 260x158mm WA-AP-140 Holddown plate made of ESD acrylic plastic, approx. 15mm thick, max. working area: 520x295mm; outside dimensions : 576x330,5mm WA-AP-410 Holddown plate made of ESD-PVC, approx. 10mm thick max. working area: 295x180mm; outside dimensions: 335x227 mm WA-AP-210 updated: Dec Subject to technical modifications Seite 7
21 Mechanical Fixture Holddown element crosshead with 3 heigh-adjustable pushdown fingers, mounting material incl.; length: 408mm WA-AE-400 Holddown element crosshead with 3 heigh-adjustable pushdown fingers, mounting material incl. WA-AE-140 Holddown element crosshead with 5 heigh-adjustable pushdown fingers, mounting material incl.; length 578mm WA-AE-410 Holddown element crosshead with 3 heigh-adjustable pushdown fingers, mounting material incl. WA-AE-210 Protecting plate for WA-KTP-400 approx. 3mm thick, incl. fixing material outside dimensions: 370x250mm WA-HSP-400 updated: Dec Subject to technical modifications Seite 8
22 Mechanical Fixture Protecting plate for WA-KTP-140 acrylic plastic, approx. 3mm thick; incl. fixing material outside dimensions: 239x112mm WA-HSP-140 Protecting plate for WA-KTP-410 approx. 3mm thick, incl. fixing material outside dimensions: 543x316mm WA-HSP-410 Protecting plate for WA-KTP-210 acrylic plastic, approx. 3mm thick; incl. fixing material outside dimensions: 321x182mm WA-HSP-210 Interface expansion 4x96pole Wire-Wrap for WA-KTP-400 upgradeable, incl. fixing material WA-KTP-IF384 Interface-block 170pole with interface pins max. 6 blocks for a WA-KTP-400-I adjustable incl. fixing material WA-KTP-IF170 updated: Dec Subject to technical modifications Seite 9
23 Mechanical Fixture Interface expansion 2x96pol. Wire-Wrap for WA-KTP-140 upgradeable, incl. fixing material WA-KTP-IF192 Interface expansion 4x96pole Wire-Wrap for WA-M-1400/WA-M-1500/WA-P-3000 upgradeable, incl. fixing material WA-M-IF384 Interface-block 170pole with interface probes max. 6 blocks for a WA-M-1500-I adjustable incl. fixing material WA-M/P-IF170 Interface expansion 2x96pol. Wire-Wrap for WA-M-1401/WA-M-1501 upgradeable, incl. fixing material WA-M-IF192 Pneumatic-interface-block 8pole for internal interface on the probe plates WA-KTP-xxx-I incl. fixing material WA-KTP-IF-PBB-8 updated: Dec Subject to technical modifications Seite 10
24 Mechanical Fixture Pneumatic-interface-block 8pole for internal interface in the housing WA-M-1xxx-I or WA-P-3xxx-I incl. fixing material WA-M/P-IF-PSB-8 Interface expansion for WA-M-1510-I for upgrading; mounting below the base plate, for max. 3 blocks (not included); mountable on two mounting positions WA-M-1510-I-203_1 Interfac expansion for WA-KTP-140/400/410-I for upgrading mounting below the probe plate, for max. 3 blocks (not included); mountable on two mounting positions WA-KTP-XX0-I-004 Raise of case 90mm V2.0 for case MFG-530-Pult-Gehäuse-V1.0; aluminium, heigh: 90mm MFG-530-GEHÄUSEERHÖHUNG-90 Raise of case 250mm for case MFG-530-Pult-Gehäuse-V1.0 heigh: 250mm MFG-530-GEHÄUSEERHÖHUNG-250 updated: Dec Subject to technical modifications Seite 11
25 Mechanical Fixture Raise of case 45mm for case MFG-280-PULT-GEHÄUSE-V1.0 (for WA-M-1401/1501; PA3001) MFG-280-GEHÄUSEERHÖHUNG Raise of case 90mm V1.0 for case MFG-700-Pult-V1.0; aluminium RAL7035 MFG-700-GEHÄUSEERHÖHUNG-90 Start button, magnetic for WA-M-15xx deskform with parallel holddown mechanic-system WA-M-1500-MS Spring probes for UUT 3N sockets incl., spring force 3N; extended height: 13,3mm point style: 4mm WA-GPA-13-3N Spring probes for UUT 6N sockets incl., spring force 6N; extended height 13,3mm poing style: 4mm WA-GPA-13-6N updated: Dec Subject to technical modifications Seite 12
26 Mechanical Fixture Spring probes for UUT 3N sockets incl., spring force 3N; extended height 13,3mm point style: 3mm (plastic) WA-GPA-13-3N-K Spring probes for UUT 6N sockets incl., spring force 6N; extended height 13,3mm point style: 3mm (plastic) WA-GPA-13-6N-K updated: Dec Subject to technical modifications Seite 13
27 WA-M-16xx Mechanical Fixture Technical despription parallel mechanical pressure unit interface with 384 contacts or probe-interface lower-cost because of the changeable unit individual upgrading through the unit assembly system customer specified interface fixture is suitable for about 1000N (1000 probes with 1N spring force) case can be opened during the debugging changeable plates / raise of case are not included in the fixture; order separately various accessoires Fixture: Outside dimensions: Working area: Probe plate: Moving plate: Holddown plate: WA-M x270x450mm 350x230mm WA-KTP-1600 WA-PAP-1600 WA-AP-1600 WA-M-1600-I 530x270x450mm 350x215mm WA-KTP-1600-I WA-PAP-1600 WA-AP-1600 updated: Dec Subject to technical modifications Seite 1
28 Mechanical Fixture Fixture with parallel closing pressure unit without changeable plates, incl. 384pole internal interface (expandable), max. working area: 350x230mm; outside dimensions: 530x270x450mm WA-M-1600 Fixture with parallel closing pressure unit without changeable plates, incl. mounting support for internal interface with max. 1700Pins, usable interface-blocks: TSI-50-USB-A-Receiver / TSI-50-16A-45-FKS TSI / TSI-50-PSB max. working area: 350x215mm; outside dimensions: 530x270x450mm WA-M-1600-I Probe plate CEM1; incl. 384pole internal interface (expandable) max. working area: 350x230mm; outside dimensions: 440x320mm WA-KTP-1600 Probe plate for FKS-IF CEM1; incl. mounting support for internal interface with max. 1700Pins, usable interface-blocks: TSI-50-USB-A-Adapter / TSI-50-16A-45-IK TSI / TSI-50-PBB max. working area: 350x215mm; outside dimensions: 440x320mm WA-KTP-1600-I Moving plate made of EGS-AS with 8 distance stoppers (3mm) outside dimensions: 440x320mm, ca. 5mm stark WA-PAP-1600 updated: Dec Subject to technical modifications Seite 2
29 Mechanical Fixture Holddown plate made of ESD acrylic plastic, approx. 15mm thick outside dimensions: 445x310mm WA-AP-1600 Raise of case 90mm V2.0 for case MFG-530-Pult-Gehäuse-V1.0; aluminium, heigh: 90mm MFG-530-GEHÄUSEERHÖHUNG-90 Raise of case 250mm for case MFG-530-Pult-Gehäuse-V1.0 heigh: 250mm MFG-530-GEHÄUSEERHÖHUNG-250 updated: Dec Subject to technical modifications Seite 3
30 Pneumatical Fixtures WA-P-3000 Fixture specification - Pneumatical changeable unit with mechanical pressure unit - deskform for easy handling - No effort because of the dual pneumatical drivesystem (24V) - Parallel mechanical pressure unit - Outside dimensions: 530 x 450 x 240 mm - Max. UUT size : 350 x 230 mm - Internal interface 192 pole standard - Extandable to 384 contacts - Signal for the start by pushing down the pressure unit - Lower-cost through the changeable unit - Individuell completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Self-closing interface through the connectors - Costumer specified interface - Thought out security conception - Check of the contacting position (optional) - Case can be opened during the debugging - Various accessories - Probe plate and pushdown plate are not included Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
31 Accessories for WA-P-3000 Pneumatical Fixtures Changeable probe plate, 192 pole internal interface included Outside dimensions: 400 x 270 mm Working area: 350 x 230 mm Holddown plate made of ESD acrylic plastic ( 15 mm) Outside dimensions: 407 x 240 mm WA-KTP-400 WA-AP-400 Changeable moving plate, spring-mounted, 6 springmounted frames incl., with distance stoppers (3 mm) Working area: 350 x 230 mm Protecting plate for sockets for WA-KTP-400 WA-PAP-400 WA-HSP-400 Raise of case for WA-M-1500 Height: 90 mm Interface expansion 4 x 96 pole for changeable probe plate WA-KTP-1400/1500 MFG-530-GE-90-V2 Outside dimensions: 530 x 450 x 240 mm WA-KTP-IF384 Interface expansion 4 x 96 pole changeable fixtures WA-M-1400/1500 Spring probes for UUT seating,sockets incl. Spring force 3N, Expanded height: 13,3 mm, Point style: OD 3 mm, (plastic) WA-M-IF-384 WA-GPA-13-3N-K Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
32 Pneumatical Fixtures WA-P-3000-I Fixture specification - Pneumatical changeable unit with mechanical pressure unit - Outside dimensions: 530 x 450 x 240 mm - Max. working area: 330 x 180 mm - Lower-cost through thechangeable unit - Individual completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Internal interface holding for max. 6 interface blocks, porbes incl. - deskform for easy handling - No effort because of the dual pneumatical drivesystem (24V) - Customer specified interface - Case can be opened during the debugging - Probe plate and pushdown plate are not included - Various accessoriesgroße Auswahl an Zubehör - Thought out security system - Check of the contacting position (optional) Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
33 Pneumatical Fixtures Accessories for WA-P-3000-I Deskform with parallel holddown mechanical-system, without changeable probe plates Outside dimensions: 530 x 450 x 240 mm Raise of case Height: 90 mm with opening in the back, cover incl. Working area: 330 x 180 mm WA-P-3000-I MFG-530-GE-90-V2 Interface block, 170 pole, with pins, max. 6 pieces in a WA-P-3000-I adjustable, mounting material incl. End position switch, 24V signal at Pin 7 closed cover (test position) WA-M/P-IF-170 WA-P-3000-SG Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
34 Accessories for WA-P-3000-I Pneumatical Fixtures Changeable probe plate with protecting plate for sockets, Outside dimensions: 400 x 270 mm Working area: 330 x 180mm Techn. Beschreibung: Andruckplatte Holddown plate aus made ESD - of ESD Plexiglas acrylic plastic (10 mm) (15 mm) Außenmaße: Working area: x 230 x 240 mm mm WA-KTP-400-I Order Bestellnummer: number: WA-AP-400 Changeable moving plate (3N), spring mount Outseide dimensions: 400 x 270 mm Working area: 330 x 180 mm Interface block, 170 pole, with interface pins, max. 6 Stück in a WA-KTP-400-I adjustable, mounting material incl. WA-PAP-400-I WA-KTP-IF-170 Spring probes for UUT seating, sockets incl., spring force(3n) Expanded heightt: 13,3mm Point style: 3 mm (plastic)) Spring probes for UUT seating, sockets incl., spring force (3N), Expanded height: 13,3 mm Point style.: 4 mm (nickel) WA-GPA-13-3N-K WA-GPA-13-3N Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
35 Pneumatical Fixtures WA-P-3001 Fixture specification - Pneumatical changeable unit with mechanical pressure unit - deskform for easy handling - No effort because of the dual pneumatical drivesystem ( 24V ) - Parallel mechanical pressure unit - Outside dimensions: 450 x 280 x 240 mm - Max. UUT size : 220 x 115 mm - Signal for the start by pushing down the pressure unit - Lower-cost through the changeable unit - Individuell completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Self-closing interface through connectors 96 pole - Costumer specified interface - Thought out security conception - Check of the contacting position (optional) - Case can be opened during the debugging - Various accessories - Probe plate and pushdown plate are not included Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
36 Pneumatical Fixtures Accessories for WA-P-3001 Changeable probe plate, 96 pole internal interface incl. Outside dimensions: 270 x 140 mm Holddown plate made of ESD - acrylic plastic (10mm) Working area: 220 x 110 mm Working area: 230 x160 mm WA-KTP-140 WA-AP-140 Changeable probe plate, spring -mounted, 6 springmounted frames incl., with distance stoppers (3mm) Working area: Raise of case for W-A-P 3001 Height: 45 mm 220 x 110 mm WA-PAP-140 MFG-280-GE-45 Spring-mounted UUT-frames sockets incl. Spring probes for UUT seating,sockets incl. Spring force 3N, Expanded height: 13,3 mm, Expanded height: 13,3 mm Point style: OD 3 mm, (plastic) WA-GPA-13-3N WA-GPA-13-3N-K Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
37 Pneumatical Fixtures WA-P-3001-I Fixture specification - Pneumatical changeable unit with mechanical pressure unit - Outside dimensions: 280 x 450 x 240 mm - Max.working area: 110 x 180 mm - Lower-cost through the changeable unit - Individual completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Internal interfaceholding for max. 3 interface blocks,with pins - deskform for easy handling - No effort because of the dual pneumatical drivesystem ( 24V ) - Costumer specified interface - Case can be opened during the debugging - Probe plate and pushdown plate are not included - Various accessories - Thought out security conception - Check of the contacting position (optional) Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
38 Pneumatical Fixtures Accessories for WA-P-3001-I Deskform with parallel holddown mechanical-system, without changeable probe plates Outside dimensions: 280 x 450 x 240 mm Working area: 110 x 180 mm Raise of case Height: 45 mm WA-P-3001-I MFG-280-GE-45 Interface block, 170 pole, with pins max.3 pieces in a WA-P I adjustable, monting material incl. End position switch, 24V signal at Pin 7, closed cover (testposition ) WA-M/P-IF-170 WA-P-3000-SG Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
39 Accessories for WA-P-3001-I Pneumatical Fixtures Changeable probe plate with protecting plate for socket Outside dimensions: 140 x 270 mm Working area: 110 x 180 mm WA-KTP-140-I Techn. Beschreibung: Andruckplatte Holddown plate aus made ESD - of ESD Plexiglas acrylic plastic (10 mm) (10 mm) Außenmaße: Outside dimensions: 160 x 230 mm 160 x 230 mm Bestellnummer: WA-AP-140 Changeable moving plate, spring mounted Outside dimensions: 140 x 270 mm Working area: 110 x 180 mm Interface block, 170 pole, with interface pins, max. 3 pieces in a WA-KTP-140-I adjustable, monting material incl. WA-PAP-140-I WA-KTP-IF-170 Spring probes (3N), socket incl. Expanded height: 13,3mm Point style.: 3 mm (plastic) Spring probes (3N), socket incl. Expanded height: 13,3 mm Point style.: 4 mm (nickel) WA-GPA-13-3N-K WA-GPA-13-3N Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
40 Pneumatical Tandem Fixture WA-P-3001-T Fixture specification - Pneumatical Tanden Fixture with two seperate parallel mechanical pressure unit - deskform for easy handling - No effort because of the dual pneumatical drivesystem (24 V) - Parallel mechanical pressure unit - Outside dimensions : 560 x 450 x 240 mm - Max. UUT size: 2x 110 x 220 mm - Signal for the start by pushing down the pressure unit - Lower-cost through the changeable unit - Individuell completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Self-closing interface through connectors 96 pole - Customer specified interface - Thought of security conception - Check of the contacting position (optional) - Case can be opened during the debugging - Various accessoires - Probe plate and pushdown plate are not included Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
41 Pneumatical Tandem Fixture Accessoires for WA-P-3001-T Changeable probe plate, 96 pole internal interface incl. Outside dimensions: 140 x 270 mm Working area: 110 x 220 mm Holddown plate made of ESDacrylic plastic (10 mm) Outside dimensions: 160 x230 mm Bestellnummer: WA-KTP-140 WA-AP-140 Holddown element, crosshead with 3 height-adjustable pushdown fingers, mounting material incl. Changeable moving plate, spring-mounted, 6 springmounted frames incl., with distance stoppers ( 3 mm) Length: 160 mm Working area: 110 x 220 mm WA-AE-140 WA-PAP-140 Spring-mounted UUT-frames sockets incl. Raise of case for WA-P-3000 Height: 90 mm Expanded height: 13,3 mm WA-GPA-13-3N MFG-530-GE-90-V2 Spring probes for UUT seating,sockets incl. Spring force 3N, Expanded height: 13,3 mm, Point style: OD 3 mm, safety switch, 24V signal at closed contact on PIN 7 (plastic) WA-P-3000-SG WA-GPA-13-3N-K Büro Süd Waldstr. 4 D Alling Telefon Telefax Büro Rhein Main Ferdinand-Porsche-Str.17 D Seligenstadt Telefon Telefax Büro Westfalen Steigerring 25 D Hamm Telefon Telefax Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon Telefax Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon Telefax Internet gps-prueftechnik.de [email protected]
42 Pneumatical Fixtures WA-P-3010 Fixture specification Pneumatical changeable unit with mechanical pressure unit Outside dimensions: 740 x 510 x 250 mm Max. UUT size : 520 x 295 mm Lower-cost through the changeable unit Individuell completion through the unit assembly system Fast change of the probe plate and the pushdown plate 4 X 96 Interface connectors, standard 384 test points Fixture is suitable for about 600 N (400 probes with 1,5 N spring force) deskform for easy handling No effort because of the dual pneumatical drivesystem (24V) Check of the contacting position (optional) Customer specific interface Case can be opened during debugging Probe plate and pushdown plate are not included Additional accessories updated: Feb Subject to technical modifications Page 1
43 Pneumatical Fixtures Accessories for WA-P-3010 Pneumatical changeable unit WA-P-3010 with mechanical pressure unit Outsite dimension : 740 x 510 x 250 mm Working area : 520 x 295 mm Interface with 4 x 96 pin Connectors Changeable probe plate WA-KTP-410 Material in CEM1 4 x 96 pole internal interface incl. Outsite dimension : 570 x 335 x 10 mm Working area : ca. 520 x 295 mm Protecting plate for sockets WA-HSP-410 Protecting plate for WA-KTP-410 Polycarbonat plate 6mm thick, colourless Outsite dimension : 543 x 316 x 6mm Changeable moving plate WA-PAP-410 Spring mounted with 8 Probes (8x6N) ca. 5mm thick, 15 distance stoppers (3mm) ESD-Material (ca. 10¹² ) Outsite dimension : 570 x 331 x 5 mm Working area : 520 x 295 mm Holddown plate WA-AP-410 ESD-acrylic plastic (ca. 10¹² ), ca 15mm thick Outsite dimension : 576 x 331 x 15 mm Working area : 520 x 295 mm updated: Feb Subject to technical modifications Page 2
44 Shielded RF Test Fixture Pneumatic Fixture WA-HF-4000 Fixture Specification Pneumatic fixture for High Frequency Test Changeable cassette unit with pneumatic pressure frame mechanism Forceless and adjustable compression speed due to doubled pneumatic Cylinders (24V) Parallel pressure frame mechanism Start signal by depressing the pressure frame mechanism (optional) Kit designed as cassette type unit to maximize economy Fast and easy to change upper and bottom probe plate Interface modular and customize configurable Optional: Pylon Interface or G 12 Interface from Virginia Panel Integrated start, stop and reset buttons Running position monitoring (optional) Lockable housing Plug-in module for 4 PCB (100x160 mm) for local electronics Combination of RF, audio and video test For testing mobile telephones, "Bluetooth"-devices and WLAN Suited for acoustic (microphone and speaker) and optic (video camera) test Shielding from external RF-Signals Changeable Kit has to bought separately updated: Feb Subject to technical modifications Page 1
45 Shielded RF Test Fixture Technical Specification Desk Fixture with parallel pressure mechanics, inclusive interface for shielded RF chamber Size: Test Fixture: external dimension: L x D x H 550mm x 520mm x 380mm Complete cassette: external dimension: L x D 260mm x 210mm working area: L x D 180mm x 180mm Weight: incl. cassette unit: 20 kg Temperature: operating temperature: +10 C +40 C storage temperature: -210 C +60 C Humidity: Compressed Air: Power Supply: operating temperature: 90% r.h. no cond. by +10 C +40 C 75% r.h. no cond. by +30 C +40 C storage temperature: 90% r.h. no cond. by +60 C 6 bar oil-free 24V DC/3A for pneum. valve Interface Chamber Interface modular and free configurable Pylon Block Interface for 10 Interface Blocks Order-No.: TSI-50-IF Virginia Panel, G12 (see also G12 Receiver) Order-No.: ITA-G12 Interface HF-Chamber Pneumatic: hose diameter 6mm Pneumatic block: for max. 6 solenoid valves Connecting Panel (D x H): 250mm x 105mm (useable) Earth Connection: thread bolts M5 x 15 as well as snap fasteners Connecting Panel for HF Chamber HF: 2 x SMA-SMA socket Order-No.: HF-37SMA-50-1/1 -- UE Pneumatic: 8 x couplings - bulkhead fitting Order-No.: Festo-SCN-PK-3 Audio: 9-polig. D-Sub, shielded Order-No.: HF-SUB-D-9-M-L Daten: 15-polig. D-Sub, shielded Order-No.: HF-SUB-D-15-M-L Power + Reserve: 25-polig. D-Sub, shielded Order-No.: HF-SUB-D-25-M-L Optional USB connector shielded Order-No.: HF-USB-A-M RF - Shielded without Absorber: with Absorber: Order-No.: WA-HF-4000-ABS 300 MHz. 500 MHz > 60 db 300 MHz. 500 MHz > 75 db 600 MHz MHz > 55 db 600 MHz MHz > 75 db 1100 MHz 1500 MHz > 50 db 1100 MHz 1500 MHz > 70 db 1600 MHz 2000 MHz > 45 db 1600 MHz 2000 MHz > 60 db 2100 MHz 2500 MHz > 55 db 2100 MHz 2500 MHz > 65 db updated: Feb Subject to technical modifications Page 2
46 Shielded RF Test Fixture Accessories Complete Changeable Fixture Kit WA-HF-400 Consisting of: WA-HF-KTP-400 WA-HF-AP-400 WA-HF-PAP-400 Changeable probe plate WA-KTP-400 Changeable probe plate incl. internal 96 pol. connector Outside dimension: 260 x 210 x 10 mm Working area: 180 x 180 mm Changeable pressure plate WA-AP-400 pressure plate 10mm dick Incl. 4 Pneumatic connector 96 pol. connector Outside dimension: 260 x 210 mm Changeable moving plate WA-PAP-400 Incl. 6 spring probes and distance stopper (3mm) Working area: 180 x 180 mm Spring Probes WA-GPA-13-3N Spring force 3N, incl. sockets Height 13,3 mm, Tip style 4 mm (Nickel/Rhodium) updated: Feb Subject to technical modifications Page 3
Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem
4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
Adding Pneumatic Preset Counter. Type 497. Continuously visible preset Integrated pneumatic reset 3 or 5-digit display Convenient button setting
Adding Pneumatic Preset Counter Type 497 Continuously visible preset Integrated pneumatic reset 3 or 5-digit display Convenient button setting VARIABLE PILOT SIGNAL Using two pneumatic preset counters
19" Data Racks. Adjustable feet To compensate for uneven floors and assure great stability all feet can be up to 20 mm adjusted.
19" Data Racks Attractive design and high quality are characteristic. Basic framework is welded from multiple bent metal plate, which assures great rigidity suitable for heavier equipment. All profile
System 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
G1/4 Q8. Standard with biased position
Contents Version Actuation Page Characteristics Dimensions x / Way Valves pneumatic 6,7, 0 9 electric 6,7 9, 9 / Way Valves pneumatic 6,7, 0 electric 6,7, 0 / Way Valves pneumatic 6,7,, 6, 7 electric 6,7,,
High Power Connectors for Power Supply and Power Circuits
Introduction Silver Plated Power Contacts with Contact Springs for Maximum Performance in Exposed Applications The demand for shortest possible periods of machine shut-downs and assembly times requires
InForm Mobile Units. Selection. Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley
Selection Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley Basic mobile unit Basic mobile with vertical profiles Installation options Functional shelf, low Functional shelf, inclinable
Valve systems Base plates, according to standard ISO 5599-1. Brochure
ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure
EXTeRUS. EXTeRUS - With patented design, able to join technology. and quality of materials with a charming shape. Unique
EXTeR US G L A S S - With patented design, able to join technology and quality of materials with a charming shape. Unique thanks to its outstanding loading capability with 150 kg maximum weight and height
Electro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
HERZ-Thermal Actuators
HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01
S t a r T r a d i n g. M e i j n e r s w i j k 1 3 B 6 8 4 1 H A A r n h e m + 3 1 ( 0 ) 2 6 3 3 9 1 8 4 9 + 3 1 ( 0 ) 2 6 3 3 9 1 6 5 8
S t a r T r a d i n g M e i j n e r s w i j k 1 3 B 6 8 4 1 H A A r n h e m + 3 1 ( 0 ) 2 6 3 3 9 1 8 4 9 + 3 1 ( 0 ) 2 6 3 3 9 1 6 5 8 www.startrading.nl [email protected] GALAXY 1-4 Dual motor actuator
Broadway 3D Security System
Broadway 3D Security System USER MANUAL v.1.1.0 Artec Group, Inc. 2012 Table of contents 1. General Information... 3 2. Delivery Package... 4 3.1. B3D BR... 5 3.2. B3D B... 6 3.3. B3D BM... 7 4. Integration
TS93 EMR T/PT/TDE. Surface applied door closer
TS EMR T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer with smoke detector (EMR T) Push side track mount door closer with smoke detector (EMR PT) Double
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
Fiessler Programmable Safety Center. Flexible Hard- and Software concept. Expandable with a safe bus system
E L E K T R O N I K Appliance Description Programmable safety center FPSC Fiessler Programmable Safety Center Flexible Hard- and Software concept Expandable with a safe bus system Reduction of expenditures
Fixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
Line-Mounted Valves L Series
Spare Part Kit for Valve Series B1LSAD3 Line-Mounted L Series Accessories Spare Part Kits All Series Valve Series B1LSAD3 40.1609 Incl. O-rings, gaskets, spring or muffl er Spare Part Kit for Valve Series
COB panel supports for multipole connectors
TCQ + TSFS (...CMS, alternative) CMS TSFS Use The system makes it possible to use multipole connectors within electric panels without the traditional metallic housing as protection is assured by the electric
Fiessler Programmable Safety Center. Flexible Hard- and Software concept. Available with a safe bus system or/and two counter inputs
E L E K T R O N I K Appliance Description Programmable safety center FPSC Fiessler Programmable Safety Center Flexible Hard- and Software concept Available with a safe bus system or/and two counter inputs
PB accessories. PB accessories. Labelling option. Order Information B4-2728. Printed board handle A BZA42727 BZA42724.
Printed board handle A Assembly behind front panels Only use printed board handle in conjunction with printed board retainer A (6087-097) Insertion and extraction function Labelling option B4-2728 Item
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
CONEC SnapLock. 1 Introduction
CONEC SnapLock E L E C T R O N I C C O N N E C T O R S 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional
Custom configuration such as modified angle dimensions, other flange standards, 3-way function, alternative materials.are available on request.
LEAKVALVE: HIGHLIGHTS The core of this valve is a diaphragm in stainless steel 316L, gold plated. Robust, it cannot be damaged with any normal methods. The dead volume is kept as small as possible. There
Installing Cisco TelePresence MX200 G2 - Wheel Base
This installation guide covers MX200 G2 with a wheel base. Dimensions Height: 1480 mm / 58.3 in. Width: 995 mm / 39.2 in. Depth: 715 mm / 28.0 in. Weight total: 33 kg / 73 lb Weight monitor: 24 kg / 53
HARTING Ethernet Cabling 4-poles Overview
Ethernet Cabling 4-poles Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] Connectors [on page 22] System cables [on page 24] Panel feed-throughs
The flexible performer: ALS 306
The flexible performer: ALS 306 The new labelling generation for your efficient product identification The perfect fit For highly demanding brands... The power of brands People know your products. Your
User Manual PT-E-HIP
User Manual PT-E-HIP PT-E-HIP User Manual Contents PT-E-HIP-TX Transmitter 1. Introduction 2. How It Connects 3. Features 4. Transmitter Unit Panel Layout PT-E-HIP-RX Receiver 5. Transmitter Unit Panel
DIGITUS Network & Server Cabinets. UNIQUE Series
DIGITUS Network & Server Cabinets UNIQUE Series Benefits - Server Rack 4-Point locking system front door 3-point locking system rear door Swing handle lock with profile zylinder in front and rear door
Slides and Drawers. The right collection
Slides and Drawers The right collection 1Technical Details Drawer Runners Carrying capacity Kg. Static load Dynamic load Pag. 01 Concealed Runners Excel N Excel N Excel N Excel N650 Excel N Excel PlugIn,
Vacuum drying oven for non-flammable solvents
VD series 53 Vacuum drying ovens Vacuum drying oven for non-flammable solvents A BINDER vacuum drying oven of the VD series is impressive while gently drying with its homogeneous temperature distribution.
Solenoid Valve Type 3962
Solenoid Valve Type 362 x d, x em or without explosion protection, for controlling pneumatic actuators General The Type 362 Solenoid Valve ensures a high level of operational reliability for controlling
Motorhome Entrance Door CaraD-RF With Aluminium Door Panel Art. 1401
CaraD-RF 1/10 63.1 Content.DOC Motorhome Entrance Door CaraD-RF With Aluminium Door Panel Art. 1401 Ordering Details Technical Drawing without Fly Net Door Technical Drawing with Fly Net Door Technical
Huwilift DUO, Huwilift DUO Forte Seite 4 3. Huwilift MAXI. Huwilift MAXI UP. Huwilift Senso, Huwilift E-Senso Page 4 17
INDEX Lifters Huwilift DUO, Huwilift DUO Forte Seite 4 3 Classic solution for lift-up flaps. Huwilift MAXI Page 4 7 Quickly installed for a gentle lift. Huwilift MAXI UP Page 4 13 Lifts and lowers chest
Tyan Computer. Transport PX22. Service Engineer s Manual
Tyan Computer Transport PX22 Service Engineer s Manual 1 Precaution To read through the user manual, check all assembly and follow setup process before any operation on this server To keep paper clips,
Valves. Sub-Base Mounted Valves to ISO 5599/2
Valves Sub-Base Mounted Valves to ISO 5599/2 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service life. Due to the great
TECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
ODU MINI-SNAP. Miniature Cylindrical Connectors with Push-Pull-Locking Series F
Catalogue Nr.: 5--a-e ODU MINI-SNAP Miniature Cylindrical Connectors with Push-Pull-Locking Series F ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstraße, D-85 Mühldorf/Inn Telefon: +9/86 /6 56-, Telefax:
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
Rack mounted telephone- and leased line modem for industrial applications
Rack mounted telephone- and leased line modem for industrial applications TR-6 Rack modem for industrial PSTNand /-wire leased line applications The TR-6 is an analogue V. 9 -rack PSTN modem as well as
Relay mounting systems
Page 1 Issued July 1998 Changed since April 1997 Data subject to change without notice RL COMBIFLEX RE 500 (SE 94832) (SE 970140) (SE 950216) Features Suitable for standard 19 rack, flush, semiflush, projection
zamak nitrile rubber self-extinguishing technopolymer aluminum
PS COMBOBOX valves - Valves with compact design: valve body with integrated sub-base - High flexibility: > possibility of choosing fitting dimension (--) according to users needs > manifolds from up to
K17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - [email protected] - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
HARTING Ethernet Cabling 8-poles Overview
Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs
Product catalogue, abrasive cutting
Product catalogue, abrasive cutting Cutting nozzle assemblies Abrasive jet cutting system Abrasive hopper Abrasive material www.hammelmann.com Contents (Navigation via Bookmarks) Cutting nozzle assemblies
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
SECTION 3A (Rev.F) SECTION CONTENTS. Download from www.urmet.com Technical Manuals area. sec.3a INSTALLATION...9 TECHNICAL SPECIFICATIONS...
SECTION 3A (Rev.F) Apartment door phone stations Download from www.urmet.com Technical Manuals area. ATLANTICO DOOR PHONES 2 TECHNICAL SPECIFICATIONS...2 4+n wire system door phones...2 Door phone with
Machine needle shut-off nozzle type-a
Machine needle shut-off nozzle type-a spring operated Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Operated with one axial high performance spring Index of contents Chapter
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
IP Villa System Quick Start Guide
IP Villa System Quick Start Guide Version 1.0.0 Welcome Thank you for purchasing our device! This quick start guide will help you become familiar with our device in a very short time. Before installation
MRC High Resolution. MR-compatible digital HD video camera. User manual
MRC High Resolution MR-compatible digital HD video camera User manual page 1 of 12 Contents 1. Intended use...2 2. System components...3 3. Video camera and lens...4 4. Interface...4 5. Installation...5
Equipment Information
3002A Equipment Information INDEX: DESCRIPTION AND KEY FEATURES LAYOUT NOMINAL TECHNICAL DATA CONFIGURATION Sealed Air GmbH Customer Systems Center D4 Park 4 CH-6039 Root-Längenbold Telephone: +41 (0)
VE17 DSP. Model: VE-17DS. Lista Części Polish
Model: VE-17DS Lista Części Polish Spis Treści Handle 3 Base 5 Wiring - Wear and Tear parts 7 DF100-A Foam Generator art no. 50000055 9 Handle VE02 3 Handle VE02 4 Poz Numer katalogowy Iloś Opis 1 VF40104EU
Magnetic proximity switches
Magnetic proximity switches Magnetic proximity switches Overview Page 38 Functional principle and installation Page 39 Cylindrical designs Page 41 Rectangular designs Page 42 37 Kurzübersicht Magnetoresistive
Mounting Instructions for SP4 Power Modules
Mounting Instructions for SP4 Power Modules Pierre-Laurent Doumergue R&D Engineer Microsemi Power Module Products 26 rue de Campilleau 33 520 Bruges, France Introduction: This application note gives the
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
Product Information Sheet UH28CS-12kV Hi Pot Tester
Product Information Sheet UH28CS-12kV ETL Prüftechnik GmbH Telefon: +49 711 83 99 39-0 E-Mail: [email protected] Carl-Peters-Straße 23 D-70825 Korntal-Münchingen Telefax: +49 711 83 99 39-9 Internet:
Cond-IS RF Conducted Immunity System
Cond-IS RF Conducted Immunity System About RF Conducted Immunity In the global contest of EMC testing for residential and industrial EUTs (Equipments Under Test) RF Conducted Immunity compliance verification
Laser diffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTL 3B Laser diffuse reflection light scanner with background suppression Dimensioned drawing We reserve the right to make changes DS_HRTL3B_en.fm en 01-2010/12 50114049
Thermal-Magnetic Circuit Breaker 3120-...-M1-..
Thermal-Magnetic Circuit Breaker -...-M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 34). The addition of a magnetic tripping
0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
QR12 (1.22 ) Diameter Optical Encoder
Improving the Quality of Life through the Power in Light QPhase QR12 (1.22 ) Diameter Optical Encoder Design Features: Low profile assembled height of Bearing design simplifies encoder attachment Resolutions
Description. Dimensions. Features. www.pwb-encoders.com. precision works better
Description The MEC22 is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square wave outputs in quadrature
MOVIEtube CR. Cinematography Rig. Setup Camera Sony PDW-F3 (MTCR-P-10-01) Version 03-2011 / English
MOVIEtube CR Cinematography Rig (MTCR-P-10-01) Setup Camera Sony PDW-F3 Version 03-2011 / English Step by step assembly instruction 1) The MOVIEtube CR (MTCR-P-10-01) is supplied as shown in the picture
Jack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes
BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can
Figure 2 The fan and shroud also needs to be removed for access to the four a/c compressor bolts and removal of the compressor from the top.
Here are some pictures to show what s required when replacing the A/C compressor, expansion valve and receiver/drier on a 2001 Volvo V70. Even if you don t replace these A/C parts these pictures can help
Solid-State Timer H3G
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-11000(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : [email protected] Solid-State Timer Low-Cost, Plug-In
IT infrastructure Efficiency-boosting solutions. nextlevel. for data centre
IT infrastructure Efficiency-boosting solutions nextlevel for data centre 2 Rittal IT infrastructure The whole is more than the sum of its parts. The same is true of Rittal The System. With this in mind,
Page 162. Page 154. Page 158 Page 146. Page 157. Page 152. Page 160. Page 149. Page 159. Page 156. Page 150
Page 162 NEW Page 154 Page 158 Page 146 Page 157 Page 152 Page 160 Page 159 Page 149 Page 156 Page 150 Summary Audible Signal Devices Page 151 Page 163 Page 148 installation version Free-standing Electronic
PS 155 WIRELESS INTERCOM USER MANUAL
PS 155 INTERFACE TO SIMPLEX WIRELESS INTERCOM USER MANUAL Issue 2011 ASL Intercom BV DESIGNED AND MANUFACTURED BY: ASL INTERCOM BV ZONNEBAAN 42 3542 EG UTRECHT THE NETHERLANDS PHONE: +31 (0)30 2411901
TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector
Product datasheet Characteristics TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector Main Range of product Product or component type Range compatibility Enclosure material Bus
How To Use A Power Supply On A Powerline 2.2 (Ai)
KNX/EIB Product documentation Issue: 05.08.2010 629x1220 Push button sensor 3 comfort 1-gang Push button sensor 3 comfort 2-gang (1+1) Push button sensor 3 comfort 3-gang Push button sensor 3 comfort 4-gang
ALBINS SEQUENTIAL SHIFTER
ALBINS SEQUENTIAL SHIFTER Updated 12/11/11 8-AGB5-INST GENERAL NOTES The Albins Sequential Shifter is specifically designed for AGB transaxles. It features an integral reverse lockout lever and has a position
14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. [email protected] - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
O R G A N I C P R O D U C T L I N E
A P O W E R F U L D E S I G N F O R S U C C E S S F U L P O I N T O F S A L E O R G A N I C P R O D U C T L I N E U P R I G H T E X T R U S I O N Aluminium Anodized or Ral Powder Coated W: 130mm 3.64 Kg/m
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE Cable Processor Module overview WARNING! When tipping the Cable Processor Module back, (after removing the toggle arm pin), use extreme caution not to drop
19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=600mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
Single sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
2M IR Mini Dome Quick Installation Guide
2M IR Mini Dome 2M IR Mini Dome Quick Installation Guide Please follow the installation steps below to set up 2M IR Mini Dome IP Camera. Check the package contents against the list below. See P.1 Physical
Elegant ECM. ELEGANT ECM air conditioners allow. The range is made up of 12 models: Ceiling Air Conditioner
Elegant ECM Ceiling Air Conditioner ELEGANT ECM air conditioners allow to heat and cool very economically small and medium areas, like shops, show rooms, workshops, supermarkets. The range is made up of
Technical catalogue convectors POLAND 2012
Technical catalogue convectors POLAND 2012 index convectors review...3 Narbonne...4 Narbonne VT... 10 Narbonne V... 16 Narbonne V VT... 20 mounting distances for Narbonne...26 mounting distances for Narbonne
Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
Wall Mounted Products
Metallic Indoor PK Termination Boxes Prysmian Part Numbers: see below Metallic PK Termination Boxes are designed for the termination, branching and distribution of fibre optic cables in telecommunication,
Combi switchbox with integrated 3/2 way pilot valve
H Combi switchbox with integrated 3/2 way pilot valve Construction The GEMÜ combi switchbox with integrated 3/2 way pilot valve for pneumatically operated quarter turn actuators has a micro-processor controlled
FEATURES. ! Sealing to IP68 (fully waterproof) Infra-red optical navigation technology
ERGONOMICAL IP68 TRACKBALL UNIT Waterproof trackball & scroll wheel IP68 50mm The Series desktop trackball is an extremely high specification device that incorporates the latest IP68 technology. The trackball
An intercom completes any access control system by providing a means for the user of screening visitors before granting access, thereby significantly
INTERCOM SYSTEMS An completes any access control system by providing a means for the user of screening visitors before granting access, thereby significantly increasing security. traffic barriers POLOphone
367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube.
PUMPMASTER 2 accessories, other MOBILE oil dispensers PumpMaster 2 Accessories 01 OIL PUMPS 360 1 360 120 367 000 367 011 369 910 360 1 Wall bracket 360 120 Floor bracket 360 001 Bung adaptors 2" (M) connection
PHA 2000 PHB 3000 EXIT PAD
PHA 2000 PHB 000 EXIT PAD Panic Hardware in Contur Design PHA 2000 PHB 000 EXIT PAD THE MODULAR PANIC HARDWARE-SSTEM IN CONTUR DESIGN Prior knowledge of how to open the escape door is not expected. DANGER
PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
CutMaster 82. 6.04 Major External Replacement Parts
CutMaster 8 6.0 Major External Replacement Parts Item # Qty Description Catalog # Cover with labels 9-08 Base Enclosure Assembly 9-08 Tube, roll handle 9-0 Front Panel 9-07 Rear Panel 9-00 Art # A-080
UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves
U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking
Electro-hydraulic pressure switches type DG
Electro-hydraulic pressure switches type DG Pressure p max = 700 bar See also: For electronic pressure switches type DG 5 E see D 5440 E Analogous pressure transducer type DT 1 see D 5440 T Analogous pressure