PCMC063T- Power Choke Coil
|
|
|
- Osborne Mathews
- 9 years ago
- Views:
Transcription
1 PCMC063T- Power Choke Coil Features Low loss realized with low DCR 100% lead (Pb) free, RoHS compliant High performance (Isat) realized by metal dust core Low profile: 12.6mm x 13.8mm x 5.0mm Capable of high frequency (3MHz) Part Number L0 Inductance (0A) Electrical Specifications Rdc (mω) Heat Rating Current DC Amps. Idc (A) Saturation Current DC Amps. Isat (A) Typical Maximum Typical Typical PCMC063T-R33MN PCMC063T-R47MN PCMC063T-1R0MN PCMC063T-1R2MN PCMC063T-1R5MN PCMC063T-2R2MN PCMC063T-3R3MN PCMC063T-4R7MN Mechanical Specifications Code R36 R47 R50 R56 R68 1R5 L 14.0 max 13.8 max 13.8 max 13.8 max 13.8 max 13.8 max W 12.6 ± ± ± ± ± ± 0.2 T 5.2 max 5.0 max 5.0 max 5.0 max 5.0 max 5.0 max A 2.0 ± ± ± ± ± ± 0.5 A 2.5 ± ± ± ± ± ± 0.1 B 4.0 ± ± ± ± ± ± 0.5 B 6.0 ± ± ± ± ± ± 0.2 How to Order PCMC 063T R33 M N Series Number Size Inductance Value Tolerance Materials Size Inductance Value Tolerance Materials 063T = 6.5mm x 6.9mm x 3.0mm R33 = 0.33uH M = ± 20% N type R47 = 0.47uH 1R0 = 1.0.uH 1R2 = 1.2uH 1R5 = 1.5uH 2R2 = 2.2uH 3R3 = 3.3uH 4R7 = 4.7uH 21
2 PCMC063T- Power Choke Coil Marking and Date Code Marking The inductor is marked with a 3-digit code Example uH R33 Date Code X: Year (Ex: 2004 = 4) XX: Week (Serial Number: 01-52) XXX: Taping No. (Serial number: ) Recommended Land Pattern Dimensions (mm) A 3.5 B 3.7 C
3 PCMC063T- Power Choke Coil 23
4 PCMC104T- Power Choke Coil Features High saturation current Low DCR 100% lead (Pb) free, RoHS compliant Low profile: 10.0mm x 11.5mm x 4.0mm Capable of high frequency (1MHz) Part Number L0 Inductance (0A) Electrical Specifications Rdc (mω) Heat Rating Current DC Amps. Idc (A) Saturation Current DC Amps. Isat (A) Typical Maximum Typical Typical PCMC104T-R15MN PCMC104T-R36MN PCMC104T-R45MN PCMC104T-R56MN Mechanical Specifications Code R15 R36 R45 R56 L 11.5 max 11.5 max 11.5 max 11.5 max W 10 ± ± ± ± 0.2 T 4.1 max 4.0 max 4.0 max 4.0 max A 2.0 ± ± ± ± 0.5 A 2.5 ± ± ± ± 0.1 B 3.0 ± ± ± ± 0.5 B 5.0 ± ± ± ± 0.2 How to Order PCMC 104T R45 M N Series Number Size Inductance Value Tolerance Materials Size Inductance Value Tolerance Materials 104T = 10.0mm x 11.5mm x 4.0mm R uH M = ± 20% N type R36 = 0.15uH R45 = 0.45uH R56 = 0.56uH 21
5 PCMC104T- Power Choke Coil Marking The inductor is marked with a 3-digit code Example uH R45 Date Code X: Year (Ex: 2004 = 4) XX: Week (Serial Number: 01-52) XXX: Taping No. (Serial number: ) Marking and Date Code Recommended Land Pattern Dimensions (mm) A 4.0 B 4.5 C
6 PCMC133E - Power Choke Coil Features Low loss realized with low DCR High performance (Isat) realized by metal dust core 100% lead (Pb) free, RoHS compliant Low profile: 12.6mm x 13.8mm x 3.5mm Capable of high frequency (3MHz) Part Number L0 Inductance (0A) Electrical Specifications Rdc (mω) Heat Rating Current DC Amps. Idc (A) Saturation Current DC Amps. Isat (A) Typical Maximum Typical Typical PCMC133E-R47MF PCMC133E-R56MF PCMC133E-R68MF Mechanical Specifications Code R47 R56 R68 L 13.8 max 13.8 max 13.8 max W 12.6 ± ± ± 0.2 T 3.5 max 3.5 max 3.5 max A 2.0 ± ± ± 0.5 A" 2.5 ± ± ± 0.1 B 4.0 ± ± ± 0.5 B 6.0 ± ± ± 0.2 How to Order PCMC 133E R68 M F Series Number Size Inductance Value Tolerance Materials Size Inductance Value Tolerance Materials 133E = 12.6mm x 13.8mm x 3.5mm R68 = 0.68uH M = ± 20% F type 21
7 PCMC133E - Power Choke Coil Marking and Date Code Marking The inductor is marked with a 3-digit code Example uH R68 Date Code X: Year (Ex: 2004 = 4) XX: Week (Serial Number: 01-52) XXX: Taping No. (Serial number: ) Recommended Land Pattern Dimensions (mm) A 5.0 B 8.0 C
8 PCMC133E - Power Choke Coil 23
9 PCMC135T- Power Choke Coil Features Low loss realized with low DCR 100% lead (Pb) free, RoHS compliant High performance (Isat) realized by metal dust core Low profile: 12.6mm x 13.8mm x 5.0mm Capable of high frequency (3MHz) Part Number L0 Inductance (0A) Electrical Specifications Rdc (mω) Heat Rating Current DC Amps. Idc (A) Saturation Current DC Amps. Isat (A) Typical Maximum Typical Typical PCMC135T-R36MF PCMC135T-R47MF PCMC135T-R50MF PCMC135T-R56MF PCMC135T-R68MF PCMC135T-1R5MF Mechanical Specifications Code R36 R47 R50 R56 R68 1R5 L 14.0 max 13.8 max 13.8 max 13.8 max 13.8 max 13.8 max W 12.6 ± ± ± ± ± ± 0.2 T 5.2 max 5.0 max 5.0 max 5.0 max 5.0 max 5.0 max A 2.0 ± ± ± ± ± ± 0.5 A" 2.5 ± ± ± ± ± ± 0.1 B 4.0 ± ± ± ± ± ± 0.5 B 6.0 ± ± ± ± ± ± 0.2 How to Order PCMC 135T R56 M F Series Number Size Inductance Value Tolerance Materials Size Inductance Value Tolerance Materials 135T = 12.6mm x 13.8mm x 5.0mm R36 = 0.36uH M = ± 20% F type R47 = 0.47uH R50 = 0.50uH R56 = 0.56uH R68 = 0.68uH 1R5 = 1.50uH 21
10 PCMC135T- Power Choke Coil Marking and Date Code Marking The inductor is marked with a 3-digit code Example uH R56 Date Code X: Year (Ex: 2004 = 4) XX: Week (Serial Number: 01-52) XXX: Taping No. (Serial number: ) Recommended Land Pattern Dimensions (mm) A 5.0 B 8.0 C
11 PCMC135T- Power Choke Coil 23
SPM series. Inductors for Power Circuits. Wound Metallic Magnetic Material
September 2014 Inductors for Power Circuits Wound Metallic Magnetic Material SPM series SPM3012 SPM3015 SPM3020 SPM4012 SPM4015 SPM4020 SPM5012 SPM5015 SPM5020 SPM5030 SPM6530 (2/49) REMINDERS FOR USING
January 2015. Inductors for Power Circuits. Wound Ferrite. VLCF Series. VLCF5028-2 Type VLCF5028-2
January 2015 Inductors for Power Circuits Wound Ferrite VLCF Series VLCF5028-2 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
HP1, HPH1 HP2, HPH2 HP3, HPH3 HP4, HPH4 HP5, HPH5 HP6, HPH6. Winding Layouts. One 6-filar winding
Document 63- HP, HPH HP, HPH HP3, HPH3 HP4, HPH4 HP5, HPH5 HP6, HPH6 Six : isolated windings that can be connected in series or parallel Tightly coupled windings 500 Vrms, one minute isolation between
Renco Electronics, Inc.
Abstract As high tech electronic products and their power supplies continue to shrink in size the peak current handling capability of power inductors should be looked at closely by the design engineer.
PCC-M0854M (MC) PCC-M0850M (MC) PCC-M1054M (MC) PCC-M1050M (MC) PCC-M1050ML (MC) PCC-M1060ML (MC)
Power Choke Coil for Automotive application : PCC-M7M (MC) PCC-M8M (MC) PCC-M8M (MC) PCC-M1M (MC) PCC-M1M (MC) PCC-M1ML (MC) PCC-M16ML (MC) M7M M8M M8M M1M M1M M1ML M16ML Realize high heat resistance and
SPECIFICATION MARITEX 06/30/ 08 CHIP INDUCTORS (ROHS)
FL201209SERIESLFR FL201209SERIESLFR Scope: This specification applies to multilayer ferrite & ceramicchip inductors. 1. Part Number Key & Mechanical Drawing FL XX XX XX XXX X A B C Tolerance Inductance
Typical Performance 1. IS-95C ACPR 21.0 - - - dbm WCDMA ACLR - 19.5 18.5 - dbm
Device Features OIP3 = 45.0 dbm @ 1900 MHz Gain = 15.0 db @ 1900 MHz Output P1 db = 27.5 dbm @ 1900 MHz 50 Ω Cascadable Patented Over Voltage Protection Circuit Lead-free/RoHS-compliant SOT-89 SMT package
November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]
![November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]](/thumbs/29/13476958.jpg "November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s November 0 -terminal Filters For signal line MEM series MEM0S MEM0SC MEM0V MEM0F MEM608P 0[0805 inch]* 0[0805 inch] 0[0805 inch] 0[0805 inch] 608[060 inch] * Dimensions Code JIS[EIA]
WE-GFH High Frequency SMD Inductor
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 1.92 MHz L 100 µh ± 10% Rated current T = 40 K I R 160 ma max. DC Resistance
Applications SS 26 V- R 05 1170
AC Line Filters SS Coils, SS2V Type Overview The KEMET SS Coils, SS2V Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common mode choke
February 2015. Chip Beads. For power line. HF-ACC Series. HFxxACC3216. * Dimensions Code JIS[EIA]
![February 2015. Chip Beads. For power line. HF-ACC Series. HFxxACC3216. * Dimensions Code JIS[EIA]](/thumbs/19/266676.jpg "February 2015. Chip Beads. For power line. HF-ACC Series. HFxxACC3216. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s February 2015 Chip Beads For power line HF-ACC Series HFxxACC3216 [1206 inch]* * Dimensions Code JIS[EIA] (2/8) REMINDERS FOR USING THESE PRODUCTS Before using these products,
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
Metal Film Resistors, Industrial, Precision
CMF Industrial Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product Specification October 13, 11 V.8 Product
AP1506. 150KHz, 3A PWM BUCK DC/DC CONVERTER. Pin Assignments. Description. Features. Applications. ( Top View ) 5 SD 4 FB 3 Gnd 2 Output 1 V IN
Description Pin Assignments The series are monolithic IC designed for a stepdown DC/DC converter, and own the ability of driving a 3A load without external transistor. Due to reducing the number of external
Understanding SMD Power Inductors. Application Note. July 2011
Understanding SMD Power Inductors July 2011 Application Note Power inductors play an important role in voltage conversion applications by yielding lower core losses. They are also used to store energy,
AP1509. 150KHz, 2A PWM BUCK DC/DC CONVERTER. Description. Pin Assignments V IN. Applications. Features. (Top View) GND GND. Output AP1509 GND GND
Description Pin Assignments The series are monolithic IC designed for a stepdown DC/DC converter, and own the ability of driving a 2A load without additional transistor. It saves board space. The external
Application Note TMA Series
1W, SIP, Single & Dual Output DC/DC Converters Features SIP Package with Industry Standard Pinout Package Dimension: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 5V&12V Models 19.5 x 10.2 x 7.1 mm (0.77 x
DATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS RL-High power series 5%, 2%, 1% sizes 0805/1206
DATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS series 5%, 2%, 1% sizes 005/1206 RoHS compliant Product specification Aug 27, 200 V.2 Product specification 2 SCOPE This specification describes RL005/1206
Applications SS 11 VL- R 03 550
AC Line Filters SS Coils, SSVL High Frequency Type Overview The KEMET SS Coils, SSVL Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common
TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603
WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without
DATA SHEET ARRAY CHIP RESISTORS YC/TC 5%, 1% sizes YC:102/104/122/124/162/164/248/324/158/358 TC: 122/124/164
Product specification December 11, 2015 V.2 0 DATA SHEET ARRAY CHIP RESISTORS YC/TC 5%, 1% sizes YC:102/104/2/4/162/164/248/324/158/358 TC: 2/4/164 RoHS compliant Product specification 2 SCOPE This specification
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
Capacitance Cap. Tol. Suffix construction. Rated voltage
Metallized Polypropylene Film Capacitors Type:ECWFE Plastic Film Capacitors Non-inductive construction using metalized Polypropylene film with flame retardant plastic case. Features Small size Excellent
Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard
Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n
Gas Discharge Tube (GDT) Products CG5 and SL0902A Series. CG5 and SL0902A Series
Description Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Littelfuse Broadband Optimized SL0902A Series offers high surge ratings in a miniature package. Special design
WE-PD SMD Shielded Power Inductor
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 1 khz/ 250 mv L 100 µh ±20% Rated current T = 40 K I R 2.5 A max. Saturation
SELECTION GUIDE. Nominal Input
www.murata-ps.com NKE Series FEATURES RoHS Compliant Sub-Miniature SIP & DIP Styles 3kVDC Isolation UL Recognised Wide Temperature performance at full 1 Watt load, 40 C to 85 C Increased Power Density
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
TQ SMD RELAYS TQ SMD LOW-PROFILE SURFACE-MOUNT RELAY FEATURES SPECIFICATIONS
LOW-PROFILE SURFACE-MOUNT RELAY RELAYS.55 5.6. FEATURES Low-profile: 6 mm.36 inch (Tape height: max. 6.5 mm.56 inch) Tape and reel package is available as standard packing style Surge withstand between
RI-80 SMD Series Dry Reed Switch
formerly RI-80 SMD Series Dry Reed Switch RI-80 SMD Series Ultra-micro dry-reed switch hermetically sealed in a gas-filled glass envelope. Single-pole, single-throw (SPST) type, having normally open contacts,
0.9V Boost Driver PR4403 for White LEDs in Solar Lamps
0.9 Boost Driver for White LEDs in Solar Lamps The is a single cell step-up converter for white LEDs operating from a single rechargeable cell of 1.2 supply voltage down to less than 0.9. An adjustable
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant & Halogen Free
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%, 1% RoHS compliant & Halogen Free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes series chip
SKR - industry relay
SKR - industry relay the universal relay SKR the time module STM the socket The strengths of the SKR industry relay lie in the mature and thoughtout construction. Over-average contact safety and life time,
Power Supplies 3. SDN-P DIN Rail Series
SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications.
Application Note, Rev.1.0, September 2008 TLE8366. Application Information. Automotive Power
Application Note, Rev.1.0, September 2008 TLE8366 Automotive Power Table of Contents 1 Abstract...3 2 Introduction...3 3 Dimensioning the Output and Input Filter...4 3.1 Theory...4 3.2 Output Filter Capacitor(s)
Pulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of
Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: /// official distributor of Pulse Withstanding Thick Film Chip Resistor-SMDP Series 1. Scope -This specification applies to ~ sizes
SPECIFICATION. MAT.03A Embedded Active GPS and Cellular Antenna Assembly and Reference Board
SPECIFICATION Part Number: MAT.03A Product Name: Features: MAT.03A Embedded Active GPS and Cellular Antenna Assembly and Reference Board 2in1 Embedded Antenna Solution Two SMA(F) connectors for Output
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/005/ 1206/1210/121/2010/2512 Product specification August 22, 2014 V.0 Product specification 2 SCOPE This specification
NBB-402. RoHS Compliant & Pb-Free Product. Typical Applications
Typical Applications Narrow and Broadband Commercial and Military Radio Designs Linear and Saturated Amplifiers 0 RoHS Compliant & Pb-Free Product NBB-402 CASCADABLE BROADBAND GaAs MMIC AMPLIFIER DC TO
DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/0805/1206/2512. RoHS compliant & Halogen free
DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/005/1206/2512 RoHS compliant & Halogen free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE
DC/DC Converter 9 to 18Vdc and 18 to 36Vdc and 36 to 75Vdc input, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output
THN 20 Series Application Note DC/DC Converter 9 to 18Vdc and 18 to 36Vdc and 36 to 75Vdc input, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless
SUPERSEDED REVISION. Gas Discharge Tubes GTCX28-XXXM-R20 Series. Features: Benefits: Applications
GTCX28-XXXM-R20 Series Raychem Circuit Protection 8mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and
Interference Suppression Film Capacitors MKP Radial Potted Type
MKP338 6 Y2 Vishay BCcomponents Interference Suppression Film Capacitors 168x12(halfpage) l P Dimensions in mm Note (1) F - F < 0.3 mm F = 7.5 mm + 0.6 mm/- 0.1 mm APPLICATIONS For standard line bypass
High Ohmic/High Voltage Metal Film Leaded Resistors
, High Ohmic/High Voltage FEATURES Metal film technology High pulse loading (up to 10 kv) capability Small size (0207/0411) Compatible with lead (Pb)-free and lead containing soldering processes Compliant
Voltech DC1000. Precision DC Bias Current Source
DC1000 Precision DC Bias Current Source DC1000 Precision DC Bias Current Source TM Integral Rack Mount Lugs High Contrast Green LED Display Easy Control Rotary Knob Output LED Indicator DC 1000 OUTPUT
INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.
CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having
1a/1c 5A/10A small power relays
VDE a/c A/A small power relays RELAYS RoHS compliant FEATURES High electrical noise immunity High switching capacity in a compact package High sensitivity: mw (a), mw (c) High surge voltage:, V between
Power chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability.
FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability. APPLICATIONS Power supplies Printers Computers Battery chargers Automotive Converters CD-ROM. QUICK
Product Name Hexa-Band Cellular SMD Antenna GSM / CDMA / DCS / PCS / WCDMA /UMTS /HSDPA / GPRS / EDGE 800 MHz to 2200 MHz
Anam PA.25a Specification Part No. PA.25a Product Name Anam Hexa-Band Cellular SMD Antenna GSM / CDMA / DCS / PCS / WCDMA /UMTS /HSDPA / GPRS / EDGE 800 MHz to 2200 MHz Feature High Efficiency Multi-Band
4N25 Phototransistor Optocoupler General Purpose Type
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
3M Serial Attached SCSI (SAS) Connector Boardmount Compliant Pin and Surface Mount, Vertical Receptacle
M Serial Attached SCSI (SAS) Connector 6 Gbps input/output connector for backplane applications Two contact mating levels for early-mate and latebreak allows blind mating or hot swap applications Capable
Design Challenges for PoDL Coupling Circuit in 100BASE-T1 and 1000BASE-T1
Design Challenges for PoDL Coupling Circuit in 100BASE-T1 and 1000BASE-T1 San Antonio, TX November 03, 2014 Ahmad Chini [email protected] Version 1.0 IEEE 802.3bp Task Force Nov 3, 2014 Page 1 Contributors
Data Sheet. HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps. Description.
HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps Data Sheet Description These tinted diffused LED lamps are designed and optimized specifically
SuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
Spezifikation für Freigabe / specification for release
Artikelnummer / part number : 82550350 Datum / Date : 31.07.06 description : 0805 SMD VARISTOR Lead Free SMD size: 0805 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE SIZE W L T a 0402 0.5
SIL Resistor Network. Resistors. Electrical. Environmental. L Series. Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant
Resistors SIL Resistor Network Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Standard Resistance
Model CS 64 Mini-DIN Cable and Adaptor
Model CS 64 Mini-DIN Cable and Adaptor Page 1 of 9 Features Hi-Pro and NOAHlink compatible cable & Mini-DIN CS 64 Clip Module / NOAHlink Adaptor #1 Integrated Clip Module - Mini-DIN Cable Integrated NOAHlink
Encoder. Switches. Series Size SMD
Piher is recognised as a world leader in custom controls and sensor solutions by the top Land Vehicle/Automotive and Appliance players. In this catalogue you will find a selection of the most prolific
High Ohmic/High Voltage Metal Glaze Leaded Resistors
VR37 High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
SPST-NO SPDT DPST-NO DPDT
PCB Relay A Power Relay for a Variety of Purposes with Various Models Conforms to VDE (EN680-), UL08, CSA22.2. Meets EN6033- requirements for household products. Clearance and creepage distance: 8 mm/8
ADSL / VDSL Low Pass Filter LCR Modules
ADSL / VDSL Low Pass Filter LCR Modules Product Information PI-XDSL_ 8/6 Introduction Introduction The market of the telecommunication is dominated by the XDSL technology (Digital Subscriber Line). Under
SESD Series Ultra Low Capacitance Discrete TVS
SESD Series Ultra Low apacitance Discrete TVS RoHS Pb GREEN ELV Description The SESD Series Ultra Low apacitance Discrete TVS provides unidirectional and bidirectional ESD protection for the world s most
Features. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND
DATASHEET IDT5P50901/2/3/4 Description The IDT5P50901/2/3/4 is a family of 1.8V low power, spread spectrum clock generators capable of reducing EMI radiation from an input clock. Spread spectrum technique
Iron Powder Cores for Switchmode Power Supply Inductors. by: Jim Cox
HOME APPLICATION NOTES Iron Powder Cores for Switchmode Power Supply Inductors by: Jim Cox Purpose: The purpose of this application note is to cover the properties of iron powder as a magnetic core material
4 A CAPACITY, THE VARIETY OF CONTACT ARRANGEMENTS FEATURES
4 A CAPACITY, THE VARIETY OF CONTACT ARRANEMENTS S RELAYS FEATURES 28. 1.12 12..472 1.4.49 The variety of contact arrangements 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Latching types available High
WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402
WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 10 ASC_WR_V23 APR.- 2015
LOW POWER SPREAD SPECTRUM OSCILLATOR
LOW POWER SPREAD SPECTRUM OSCILLATOR SERIES LPSSO WITH SPREAD-OFF FUNCTION 1.0 110.0 MHz FEATURES + 100% pin-to-pin drop-in replacement to quartz and MEMS based XO + Low Power Spread Spectrum Oscillator
High Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to
Current and Temperature Ratings
Document 361-1 Current and Temperature Ratings Introduction This application note describes: How to interpret Coilcraft inductor current and temperature ratings Our current ratings measurement method and
3. Terminal Shape P : PCB terminals FS: Surface-mounting terminals, short FL : Surface-mounting terminals, long
Surfacemounting Relay Ultracompact and Slim DPDT Relay Suitable for highdensity mounting.(.7 mm (W). mm (L) 9 mm (H)). Dielectric strength of, VAC and an impulse withstand voltage of 2, V for 2 μs (conforms
Solid-State Relays. Series Included. Solid-State Relays SIR...145 SLR...146 NLF...147. PHS Series PHS...148
Solid-State Relays Included SIR....145 SLR....146 NLF....147 PHS PHS....148 Solid-State Relays 144 www.ssac.com 800-843-8848 fax: 605-348-5685 Solid-State Relay - Isolated SIR1 & SIR2 Designed for industrial
Taping code. Reel size (mm) 2SCR513P MPT3 4540 T100 180 12 1,000 NC
2SCR53P NPN.0A 50 Middle Power Transistor Datasheet Outline Parameter alue MPT3 CEO 50 I C.0A Base Collector Emitter Features ) Suitable for Middle Power Driver 2) Complementary PNP Types : 2SAR53P 3)
HIGH REPEATABILITY SPDT, BROADBAND 12 GHZ MAGNETIC-LATCHING RF RELAY
HIGH REPEATABILITY SPDT, BROADBAND 12 GHZ MAGNETIC-LATCHING RF RELAY SERIES RF121 RELAY TYPE RF Magnetic-Latching, SPDT, Through-hole Relay DESCRIPTION The ultraminiature RF121 relay is built on Teledyne
Whale 3. User Manual and Installation Guide. DC Servo drive. Contents. 1. Safety, policy and warranty. 1.1. Safety notes. 1.2. Policy. 1.3. Warranty.
Whale 3 DC Servo drive User Manual and Installation Guide Contents 1. Safety, policy and warranty. 1.1. Safety notes. 1.2. Policy. 1.3. Warranty. 2. Electric specifications. 2.1.Operation ranges. 3. Connections
Selecting IHLP Composite Inductors for Non-Isolated Converters Utilizing Vishay s Application Sheet
VISHAY DALE www.vishay.com Magnetics Selecting IHLP Composite Inductors for Non-Isolated Converters INTRODUCTION This application note will provide information to assist in the specification of IHLP composite
Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
www.jameco.com 1-800-831-4242
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. SPECIFICATION CUSTOMER: JAMES DATE: 04.08.23 MODEL NO: DBU090030 DESIGNED
WELCOME TO VIASION. www.viasion.com
WELCOME TO VIASION www.viasion.com BRIEF INTRODUCTION Viasion Technology Co., Ltd is a professional Printed Circuit Board (PCB) manufacturer in China. With around 1500 employees totally in 2 different
NBB-300 Cascadable Broadband GaAs MMIC Amplifier DC to 12GHz
Cascadable Broadband GaAs MMIC Amplifier DC to 12GHz NBB-300 The NBB-300 cascadable broadband InGaP/GaAs MMIC amplifier is a low-cost, high-performance solution for general purpose RF and microwave amplification
Goodsky Technical Data. Contact Details
Goodsky Technical Data The following page(s) are extracted from multi-page Goodsky product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
Selecting the Optimal Inductor for Power Converter Applications
Selecting the Optimal Inductor for Power Converter Applications BACKGROUND Today s electronic devices have become increasingly power hungry and are operating at higher switching frequencies, starving for
TYXIA. *2702178_Rev.1* Installation and User Guide. Wireless receiver. TYXIA RF 642-1 channel
Installation and User Guide TYXIA Wireless receiver TYXIA RF 642-1 channel DELTA DORE Bonnemain - 35270 COMBOURG - France E-mail : [email protected] Unit compliant with the requirements of directives:
ESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips
ESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips thick film chip resistors are specially designed to meet the requirements of the ESA 4001/026 specification. They have undergone the
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0603 Package Chip LED (0.8 mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
SC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 FEATURES BC RoHS compliant Fine click with metallic spring Low profile of 3.9 mm makes perfect for high density board mounting applications
Metal Film Resistors, Industrial, Precision
Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Available Excellent high frequency characteristics Exceptionally
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 )
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) COPAL ELECTRONICS RoHS compliant INTERNAL STRUCTURE 8 4 7! 5! 9 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7
Custom Products. Magnetic Components. Vishay Dale. www.vishay.com
Magnetic Components SWITCH MODE MAGNETICS AIR CORE INDUCTORS INDUCTIVE PRODUCTS CUSTOM DESIGN AND PRODUCTION has extensive facilities for custom design and production of custom magnetics. Design applications
ALLOY POWDER CORE SERIES INTRODUCTION
ALLOY POWDER CORE SERIES INTRODUCTION 1 DMEGC alloy powder cores are made from insulated pretreatment alloy powders which have low losses at elevated temperature and have relatively stable inductance over
High-ohmic/high-voltage resistors
FEATURES High pulse loading capability Small size. APPLICATIONS Where high resistance, high stability and high reliability at high voltage are required High humidity environment White goods Power supplies.
Inductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12