SPST-NO SPDT DPST-NO DPDT

Transcription

1 PCB Relay A Power Relay for a Variety of Purposes with Various Models Conforms to VDE (EN680-), UL08, CSA22.2. Meets EN6033- requirements for household products. Clearance and creepage distance: 8 mm/8 m. Models with CTI material available. High-sensitivity (360 mw) and high-capacity (6 A) types available. Double-winding latching type available. RoHS Compliant Refer to pages 6 to 7 for details. X VDE RC+SE Ordering Information Classification Enclosure Coil Contact form ratings ratings SPST-NO SPDT DPST-NO DPDT PCB terminal General-purpose Flux protection / -A - -2A -2 Fully sealed -A - -2A -2 Bifurcated contact Flux protection -AZ -Z Fully sealed -AZ -Z High-capacity Flux protection / -A-E --E High-sensitivity Flux protection -A-H --H -2A-H -2-H Double-winding latching Flux protection K-A K- K-2A K-2 Quick-connect General-purpose Unsealed -A-T --T (upper bracket mounting). When ordering, add the rated coil voltage to the model number. Example: -A 2 V Rated coil voltage 2. Models with CTI material are also available. Contact your OMRON representative for more details.

2 Model Number Legend V (V) Relay Function None: Single-side stable K: Double-winding latching. 2. Number of Poles : pole 2: 2 poles 3. Contact Form Contact Type None: Single Z: Bifurcated Specifications Coil Ratings. Enclosure Ratings None: Flux protection : Fully sealed 6. Terminals None: Straight PCB T: Quick-connect (upper bracket mounting) 7. Classification None: General-purpose E: High-capacity H: High-sensitivity 8. Safety standards None: UL/CSA/VDE/SEV/TÜV SKVD: UL/CSA/VDE/SEV/TÜV/SEMKO 9. Rated Coil Voltage Refer to Coil Ratings. Rated voltage 2 V 2 V 00/ (0) V V 0/ (2) V 2 V 230 V V Rated current 0 Hz 93 ma 6. ma ma 9.3 ma. ma. ma.7 ma.7 ma 60 Hz 7 ma 3 ma 9/ (0.6) ma ma. (.3) ma. ma 3.8 ma 3.8 ma Coil resistance 6 Ω 260 Ω,600 Ω 6,00 Ω,0 Ω 2,000 Ω 26,80 Ω 30,000 Ω Coil inductance Armature OFF (H) (ref. value) Armature ON Must operate voltage 80% max. of rated voltage Must release voltage 30% min. of rated voltage Max. voltage 0% of rated voltage (at 23 C) Power consumption Approx. 0.9 VA at 60 Hz (approx. 0.7 VA at 60 Hz) Rated voltage V 6 V 2 V 2 V 8 V 00 V Rated current (0/60 Hz) 06 ma 88.2 ma 3.6 ma 2.8 ma. ma.3 ma Coil resistance 7 Ω 68 Ω 27 Ω,00 Ω,70 Ω 8,860 Ω Coil inductance Armature OFF (H) (ref. value) Armature ON Must operate voltage 70% max. of rated voltage Must release voltage % min. of rated voltage Max. voltage 70% of rated voltage (at 23 C) Power consumption Approx. 0.3 W 6

3 High-sensitivity Relays Rated voltage V 6 V 2 V 2 V 8 V Rated current (0/60 Hz) 7. ma 60 ma 30 ma ma ma (See note.) Coil resistance (See note.) 70 Ω 00 Ω 00 Ω,600 Ω 6,00 Ω Coil inductance Armature OFF (H) (ref. value) Armature ON Must operate voltage 70% max. of rated voltage Must release voltage % min. of rated voltage Max. voltage 70% of rated voltage (at 23 C) Power consumption Approx W. The rated current and coil resistance are measured at a coil temperature of 23 C with a tolerance of +% / % ( rated current) or ±0% ( coil resistance). 2. Operating characteristics are measured at a coil temperature of 23 C. 3. Depending on the type of Relay, some Relays do not have coil specifications. Contact your OMRON representative for more details. Double-winding Latching Relays Rated voltage V 6 V 2 V 2 V Set coil Rated current (See note.) 67 ma 38 ma 70.6 ma 3.6 ma Coil resistance (See note.) 30 Ω 3. Ω 70 Ω 69 Ω Coil inductance Armature OFF (H) (ref. value) Armature ON Reset coil Rated current 9 ma 00 ma 0 ma 2 ma Coil resistance 2 Ω 60 Ω Ω 960 Ω Coil inductance (H) (ref. value) Must set voltage Must reset voltage Max. voltage Power consumption. The rated current and coil resistance are measured at a coil temperature of 23 C with a tolerance of ±0%. 2. Operating characteristics are measured at a coil temperature of 23 C. Contact Ratings PCB/Flux Protection, Quick-connect Terminal Relays Armature OFF Armature ON % max. of rated voltage 70% max. of rated voltage 0% of rated voltage (at 23 C) Set coil: Approx. 80 mw; Reset coil: Approx. 600 mw Item General-purpose, quick-connect terminal High-capacity Number of poles pole 2 poles pole Load (cosφ = ) (cosφ = ) (cosφ = ) Rated load 0 A at V; 0 A at 30 V (cosφ = 0.; A at V; A at 30 V A at V; A at 30 V (cosφ = 0.; 2 A at V; 3 A at 30 V 6 A at V; 6 A at 30 V (cosφ = 0.; 8 A at V; 8 A at 30 V Rated carry current 0 A A 6 A Max. switching voltage 380 V, 2 V 380 V, 2 V 380 V, 2 V Max. switching current 0 A A 6 A Max. switching power 2,00 VA, 300 W,87 VA, 0 W, VA, 0 W 00 VA, 90 W,000 VA, 80 W 2,000 VA, W Failure rate (reference value) 00 ma at V 0 ma at V 00 ma at V P level: λ 60 = 0. x 0 6 /operation 7

4 PCB/Flux Protection Relays Item Bifurcated contacts High-sensitivity Number of poles pole pole 2 poles Load (cosφ = ) (cosφ = ) Rated load P level: λ 60 = 0. x 0 6 /operation PCB/Fully sealed Relays P level: λ 60 = 0. x 0 6 /operation Latching Relays A at V; A at 30 V (cosφ = 0.; 2 A at V; 3 A at 30 V A at V; A at 30 V (cosφ = 0.; 2 A at V; 3 A at 30 V (cosφ = ) 3 A at V; 3 A at 30 V (cosφ = 0.; A at V;. A at 30 V Rated carry current A A 3 A Max. switching voltage 380 V, 2 V 380 V, 2 V 380 V, 2 V Max. switching current A A 3 A Max. switching power, VA, 0 W 00 VA, 90 W, VA, 0 W 00 VA, 90 W 70 VA, 90 W VA, W Failure rate (reference value) ma at V 00 ma at V 0 ma at V Item General-purpose (single contact) Bifurcated contact Number of poles pole 2 poles pole Load (cosφ = ) (cosφ = ) (cosφ = ) Rated load 8 A at V; 8 A at 30 V (cosφ = 0.; 6 A at V; A at 30 V A at V; A at 30 V (cosφ = 0.;. A at V; 2. A at 30 V A at V; A at 30 V (cosφ = 0.; 2 A at V; 3 A at 30 V Rated carry current 8 A A A Max. switching voltage 380 V, 2 V 380 V, 2 V 380 V, 2 V Max. switching current 8 A A A Max. switching power 2,000 VA, W,00 VA, W,000 VA, W 37 VA, 7 W, VA, 0 W 00 VA, 90 W Failure rate (reference value) 00 ma at V 0 ma at V ma at V Number of poles pole 2 poles Load (cosφ = ) Rated load A at V; A at 30 V (cosφ = 0.; 3. A at V; 2. A at 30 V (cosφ = ) 3 A at V; 3 A at 30 V (cosφ = 0.;. A at V; 2 A at 30 V Rated carry current A 3 A Max. switching voltage 380 V, 2 V 380 V, 2 V Max. switching current A 3 A Max. switching power, VA, 0 W 87 VA, 7 W 70 VA, 90 W 37 VA, 60 W Failure rate (reference value) 00 ma at V 0 ma at V P level: λ 60 = 0. x 0-6 /operation 8

5 Characteristics Standard Relays Item pole 2 poles Contact resistance 30 mω max. (high-capacity type: 00 mω max.) 0 mω max. Operate (set) time ms max. Release (reset) time : 0 ms max.; : ms max. Max. operating frequency Mechanical: 8,000 operations/hr Electrical:,800 operations/hr (under rated load) Insulation resistance,000 MΩ min. (at 00 V) Dielectric strength,000 V, 0/60 Hz for min between coil and contacts,000 V, 0/60 Hz for min between contacts of same polarity,000 V, 0/60 Hz for min between coil and contacts 3,000 V, 0/60 Hz for min between contacts of different polarity,000 V, 0/60 Hz for min between contacts of same polarity Vibration resistance Destruction: 0 to to 0 Hz, 0.7-mm single amplitude (.-mm double amplitude) Malfunction: 0 to to 0 Hz, 0.7-mm single amplitude (.-mm double amplitude) Shock resistance Destruction:,000 m/s 2 Malfunction: 0 m/s 2 when energized; 00m/s 2 when no energized Endurance Mechanical: coil: 0,000,000 operations min.; coil:,000,000 operations min. (at 8,000 operations/hr) Electrical: 00,000 operations min. (at,800 operations/hr under rated load) Ambient temperature Operating: 0 C to 70 C (with no icing) Ambient humidity Operating: % to 8% Weight Approx. 7 g Values in the above table are the initial values. Double-winding Latching Relays Item pole 2 poles Contact resistance 30 mω max. 0 mω max. Set time ms max. Reset time ms max. Min. set/reset signal width 30 ms max. Max. operating frequency Mechanical:8,000 operations/hr Electrical:,800 operations/hr (under rated load) Insulation resistance,000 MΩ min. (at 00 V) Dielectric strength,000 V, 0/60 Hz for min between coil and contacts,000 V, 0/60 Hz for min between contacts of same pole;,000 V, 0/60 Hz for min between set and reset coil,000 V, 0/60 Hz for min between coil and contacts 3,000 V, 0/60 Hz for min between contacts of different poles,000 V, 0/60 Hz for min between contacts of same pole,000 V, 0/60 Hz for min between set and reset coil Vibration resistance Destruction: 0 to to 0 Hz, 0.7-mm single amplitude (.-mm double amplitude) Malfunction: 0 to to 0 Hz, 0.7-mm single amplitude (.-mm double amplitude) Shock resistance Destruction:,000 m/s 2 (approx. 00G) Malfunction: Set: 00 m/s 2 (approx. 0G); 0m/s 2 (approx. G) Reset: 00 m/s 2 (approx. 0G) Endurance Mechanical: 0,000,000 operations min (at 8,000 operations/hr) Electrical: 00,000 operations min. (at,800 operations/hr under rated load) Ambient temperature Operating: 0 C to 70 C (with no icing) Ambient humidity Operating: % to 8% Weight Approx. 7 g (Quick-connect type: approx. g) Values in the above table are the initial values. 9

6 Approved Standards UL 08 (File No. E63) H --T -A -A -A-H -A-T CSA 22.2 No.0, No. (File No. LR3928) SEV SEMKO Model Contact form Coil ratings Contact ratings SPDT SPST-NO 3 to 0 V 3 to V 0 A, 30 V (resistive) 0 A, V (general use) TV-3 (NO contact only) --E SPDT 6 A, 30 V (resistive, NO contact only) -A-E SPST-NO 6 A, V (general use, NO contact only) TV-3 (NO contact only); /3 hp, V H -2A -2A -2A-H DPDT DPST-NO A, 30 V (resistive) A, V (general use) TV-3 (NO contact only) -A-ASI SPST-NO 0 A, 30 V (resistive) 0 A, V (general use) TV-/TV-8 (NO contact only) H --T -A -A -A-H -A-T Model Contact form Coil ratings Contact ratings SPDT SPST-NO 3 to 0 V 3 to V 0 A, 30 V (resistive) 0 A, V (general use) T-3 (NO contact only) --E SPDT 6 A, 30 V (resistive, N.O only) -A-E SPST-NO 6 A, V (general use, NO contact only) TV-3 (NO contact only) H -2A -2A -2A-H DPDT DPST-NO A, 30 V (resistive) A, V (general use) TV-3 (NO contact only) -A-ASI SPST-NO 0 A, 30 V (resistive) 0 A, V (general use) TV-8 (NO contact only); / hp, 2 V Contact form Coil ratings Contact ratings pole 3 to 0 V 3 to V 2 poles 3 to 0 V 3 to V 6 A, V (AgSnIn contact) 6 A, 30 V (AgSnIn contact) 0 A, V A, V3 0 A, 30 V A, V 2 A, 380 V A, 30 V Contact form Coil ratings Contact ratings pole 3 to 0 V 6 to V 2 poles /0 A, V 0/80 A, V 3/00 A, V 6/28 A, V (AgSnIn contact)

7 TÜV (EN680-) Contact form Coil ratings Contact ratings pole 3 to 0 V, 6 V to V (for Standard coil) 3 to 8 V (for K, U coil) 3 to 70 V (for H coil) VDE (EN680-), IMQ 0 A, V (cosφ =.0) 0 A, 30 V (0 ms) 6 A, V (cosφ =.0) (AgSnIn contact) 2 poles 8 A, V A, V (cosφ =.0) A, 30 V (0 ms) 2. A, V Contact form Coil ratings Contact ratings pole, 6, 9, 2, 8, 2, 8, 60, 00, 0 V 2, 8, 2, 8, 0, 00/(0), 0,, 0/(2), 2, 230, V 2 poles, 6, 9, 2, 8, 2, 8, 60, 00, 0 V 2, 8, 2, 8, 0, 00/(0), 0,, 0/(2), 2, 230, V 0 A, V (cosφ =.0) 0 A, 30 V (0 ms) 6 A, V (cosφ =.0) A, V (cosφ =.0) A, 30 V (0 ms) 2

8 Engineering Data Maximum Switching Power Flux Protection/Plug-in Relays -, -A, --T, -A-T --E, -A-E -Z, -AZ inductive load inductive load inductive load inductive load inductive load inductive load Switching voltage (V) Switching voltage (V) Switching voltage (V) --H, -A-H, -2-2A -2-H, -2A-H inductive load inductive load inductive load inductive load K-A, K- Switching voltage (V) K-2A, K-2 Switching voltage (V) inductive load inductive load inductive load inductive load Switching voltage (V) Switching voltage (V) 22

9 Fully Sealed Relays -, -A -2, -2A -Z, -AZ inductive load inductive load inductive load inductive load inductive load inductive load Switching voltage (V) Switching voltage (V) Switching voltage (V) Endurance Flux Protection/Plug-in Relays -, -A, --T, -A-T --E, -A-E -Z, -AZ Endurance (x0 3 operations),000, V/30-V -V inductive load 30-V inductive load (L/R = 7ms) Endurance (x0 3 operations) 0,000,000 3,000, V /30-V inductive load -V/30-V Endurance (x0 operations) 3,000, V inductive load -V inductive load -V/30-V 00 --H, -A-H, -2-2A -2-H, -2A-H Endurance (x0 operations) 3,000, V inductive load 30-V inductive load -V/30-V Endurance (x0 3 operations) 0,000,000 3,000, V inductive load -V/30-V 30-V inductive load 23

10 K-A, K- K-2A, K-2 Endurance (x0 3 operations),000, V/30-V 30-V inductive load (L/R = 7ms) -V inductive load Endurance (x0 3 operations) 0,000,000, V/30-V 30-V inductive load -V inductive load Fully sealed Relays -, -A -2, -2A -Z, -AZ Endurance (x0 3 operations),000, V/30-V -V inductive load 30-V inductive load (L/R = 7ms) Endurance (x0 3 operations),000, V/30-V 30-V inductive load -V inductive load Endurance (x0 3 operations),000, V inductive load 30-V inductive load -V/30-V Ambient Temperature vs Maximum Coil Voltage Maximum coil voltage (%) coil coil The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage. Ambient temperature ( C) 2

11 Dimensions. All units are in millimeters unless otherwise indicated. 2. Orientation marks are indicated as follows: Relays with PCB Terminals SPDT Relays -, -Z, --H 3 max. (28.8)* * Terminal Arrangement/ Internal Connections Mounting Holes Tolerance: ± max. (2.3)* 2 3 Five,.3-dia. The illustration shows the -. SPST-NO Relays -A, -AZ, -A-H 0. 0.** **0.3 (-H Type) (28.8)* 3 max. * max. (2.3)* 3 Four,.3-dia. The illustration shows the -A. SPDT/High-capacity Relays --E ** **0.3 (-H Type) (28.8)* 3 max. * Eight,.3-dia. 2. max. (2.3)* SPST-NO/High-capacity Relays -A-E (28.8)* 3 max. * Six,.3-dia. 2. max. (2.3)*

12 Relays with PCB Terminals SPDT Relays -, -Z 3. max. (28.6)* (2.9)* Terminal Arrangement/ Internal Connections Mounting Holes Tolerance: ± max. (2.8)* 2 3 Five,.3-dia. SPST-NO Relays -A, -AZ max. (28.6)* (2.9)* max. (2.8)* 3 Four,.3-dia

13 Relays with PCB Terminals DPDT Relays -2, -2-H 3 max. (28.8)* * Terminal Arrangement/ Internal Connections Mounting Holes Tolerance: ±0. Eight,.3-dia. 2. max. (2.2)* DPST-NO Relays -2A, -2A-H (28.8)* max. * Six,.3-dia. 2. max. (2.2)* DPDT Relays max. (28.6)* (2.8)* Eight,.3-dia. 2. max. (2.7)* DPST-NO Relays -2A max. (28.6)* (2.8)* Six,.3-dia. 2. max. (2.7)* Double-winding Latching Relays with PCB Terminals SPDT Relays K- 3 max. (28.8)* (2.8)* max. (2.2)* S R Seven,.3-dia (After confirming coil polarity, wire correctly.) 27

14 Double-winding Latching Relays with PCB Terminals 3 max. SPST-NO Relays (28.8)* (2.8)* Terminal Arrangement/ Mounting Holes K-A Internal Connections Tolerance: ±0. DPDT Relays K-2 DPST-NO Relays K-2A 2. max. (2.2)* 2. max. (2.2)* max. (28.8)* (2.8)* max S R S + R (After confirming coil polarity, wire correctly.) Six,.3-dia. Eight,.3-dia. 0 (After confirming coil polarity, wire correctly.) Six,.3-dia. Relays with Quick-connect Terminals SPDT Relays --T 2. max. 30. max. (29.7)* Five,.3-dia S + R 0 9 Terminal Arrangement/Internal Connections 7 6 Mounting Holes Tolerance: ± (After confirming coil polarity, wire correctly.) 38 Two M3 or two 3. dia. 29. max. 2. SPST-NO Relays -A-T max. (3.9)* 30. max. (29.7)* max. (3.)* Terminal Arrangement/Internal Connections.2 7. Five,.3-dia Mounting Holes 38 3 Two M3 or two 3. dia. 29. max. 2. max. (3.9)* max. (3.)* Model number of quick-connect terminal is

15 Precautions Mounting When mounting a number of relays on a PCB, be sure to provide a minimum mounting space of mm between the two juxtaposed relays as shown below. mm min. The above minimum mounting space is necessary due to mutual thermal interference generated by the relays. This restriction may be ignored, however, depending on the operating conditions of the relays. Consult OMRON for details. There is no restriction on the mounting direction of each relay on the PCB. When using this circuit, confirm the set and reset states and then take into account the circuit constant. mm min. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by To convert grams into ounces, multiply by Cat. No. K03-E-2 29