QUINTA SECCION SECRETARIA DE RELACIONES EXTERIORES

Transcription

1 Lunes 26 de junio de 2000 DIARIO OFICIAL (Quinta Sección) 1 (Viene de la Cuarta Sección) QUINTA SECCION SECRETARIA DE RELACIONES EXTERIORES Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: Containing indentations, ribs, grooves or other deformations 2.5 B produced during the rolling process Other, of free-cutting steel 3.0 B - Other: Of circular cross-section measuring less than 14 mm in diameter: Of a type used for concrete reinforcement 2.5 B Of a type used for tyre cord 2.5 B Containing by weight 0,06 % or less of carbon 2.5 B Containing by weight more than 0,06 % but less than 0,25 % 2.5 B of carbon Containing by weight 0,25 % or more but not more 2.5 B than 0,75 % of carbon Containing by weight more than 0,75 % of carbon 2.5 B Containing by weight less than 0,25 % of carbon 2.5 B Containing by weight 0,25 % or more of carbon 2.5 B Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling: Forged Containing indentations, ribs, grooves or other deformations 2.2 B produced during the rolling process or twisted after rolling Other, of free-cutting steel 3.0 B - Other: Of rectangular (other than square) cross- section: Containing by weight less than 0,25 % of carbon 2.2 B Containing by weight 0,25 % or more of carbon 2.2 B Containing by weight less than 0,25 % of carbon: Of a type used for concrete reinforcement 2.2 B Other, of circular cross-section measuring in diameter: mm or more 2.2 B Less than 80 mm 2.2 B Other 2.2 B Containing by weight 0,25 % or more but less than 0,6% of carbon: Of a circular cross-section measuring in diameter: mm or more 2.2 B Less than 80 mm 2.2 B Other 2.2 B Containing by weight 0,6 % or more of carbon 2.2 B Other bars and rods of iron or non-alloy steel: Of free-cutting steel, not further worked than cold-formed or coldfinished Other, not further worked than cold-formed or cold-finished: - - Containing by weight less than 0,25 % of carbon: Of rectangular (other than square) cross- section Other Containing by weight 0,25 % or more but less than 0,6 % of carbon Containing by weight 0,6 % or more of carbon Other:

2 2 (Quinta Sección) DIARIO OFICIAL Lunes 26 de junio de Hot-rolled, hot-drawn or extruded, not further worked than clad 1.9 B Other Angles, shapes and sections of iron or non-alloy steel: U, I or H sections, not further worked than hot- rolled, hot-drawn 2.2 B or extruded, of a height of less than 80 mm - L or T sections, not further worked than hot- rolled, hot-drawn or extruded, of a height of less than 80 mm: L sections 2.2 B T sections 2.2 B - U, I or H sections, not further worked than hot- rolled, hot-drawn or extruded of a height of 80 mm or more: U sections: Of a height of exceeding With parallel flange faces 2.2 B Other 2.2 B Of a height exceeding 220 mm: With parallel flange faces 2.2 B Other 2.2 B I sections: Of a height of exceeding With parallel flange faces 2.2 B Other 2.2 B Of a height exceeding 220 mm: With parallel flange faces 2.2 B Other 2.2 B H sections: Of a height of 80 mm or more but not exceeding 180 mm 2.2 B Of a height exceeding 180 mm 2.2 B L or T sections, not further worked than hot- rolled, hot-drawn or extruded, of a height of 80 mm or more: L sections 2.2 B T sections 2.2 B Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded: With a cross-section which is capable of being enclosed in a 2.2 B square the side of which is 80 mm Bulb flats 2.2 B Other 2.2 B - Angles, shapes and sections, not further worked than coldformed or cold- finished: Obtained from flat-rolled products: C, L, U, Z, omega or open-ended sections Other Other - Other: Cold-formed or cold-finished from flat-rolled products: Profiled (ribbed) sheets Plated or coated with zinc, of a thickness of: Less than 2,5 mm ,5 mm or more Other Hot-rolled, hot-drawn or extruded, not further worked than clad 1.9 B Other Wire of iron or non-alloy steel: Not plated or coated, whether or not polished: - - Containing by weight less than 0,25 % of carbon:

3 Lunes 26 de junio de 2000 DIARIO OFICIAL (Quinta Sección) With a maximum cross-sectional dimension of less than 0,8 mm With a maximum cross-sectional dimension of 0,8 mm or more: Containing identations, ribs, grooves or other deformations produced during the rolling process Other Containing by weight 0,25 % or more but less than 0,6 % of carbon Containing by weight 0,6 % or more of carbon Plated or coated with zinc: - - Containing by weight less than 0,25 % of carbon: With a maximum cross-sectional dimension of less than 0,8 mm With a maximum cross-sectional dimension of 0,8 mm or more Containing by weight 0,25 % or more but less than 0,6 % of carbon Containing by weight 0,6 % or more of carbon Plated or coated with other base metals: - - Containing by weight less than 0,25 % of carbon: With a maximum cross-sectional dimension of less than 0,8 mm: Copper-coated Other With a maximum cross-sectional dimension of 0,8 mm or more: Copper-coated Other Containing by weight 0,25 % or more but less than 0,6 % of carbon Containing by weight 0,6 % or more of carbon Other: - - Containing by weight less than 0,25 % of carbon: With a maximum cross-sectional dimension of less than 0,8 mm With a maximum cross-sectional dimension of 0,8 mm or more Containing by weight 0,25 % or more but less than 0,6 % of carbon Containing by weight 0,6 % or more of carbone III. STAINLESS STEEL: Stainless steel in ingots or other primary forms; semi-finished products of stainless steel: Ingots and other primary forms 1.3 A - Other: Of rectangular (other than square) cross- section: Rolled or obtained by continuous casting: Containing by weight 2,5 % or more of nickel 1.6 A Containing by weight less than 2,5 % of nickel 1.6 A Forged Of square cross-section: Rolled or obtained by continous casting 1.6 A Forged Rolled or obtained by continuous casting 3.0 B Forged: Of circular or polygonal cross-section Other Flat-rolled products of stainless steel, of a width of 600 mm or more:

4 4 (Quinta Sección) DIARIO OFICIAL Lunes 26 de junio de Not further worked than hot-rolled, in coils: Of a thickness exceeding 10 mm 3.0 B Of a thickness of 4,75 mm or more but not exceeding 10 mm: Containing by weight 2,5 % or more of nickel 3.0 B Containing by weight less than 2,5 % of nickel 3.0 B Of a thickness of 3 mm or more but less than 4,75 mm: Containing by weight 2,5 % or more of nickel 3.0 B Containing by weight less than 2,5 % of nickel 3.0 B Of a thickness of less than 3 mm: Containing by weight 2,5 % or more of nickel 3.0 B Containing by weight less than 2,5 % of nickel 3.0 B - Not further worked than hot-rolled, not in coils: Of a thickness exceeding 10 mm: Containing by weight 2,5 % or more of nickel 3.0 B Containing by weight less than 2,5 % of nickel 3.0 B Of a thickness of 4,75 mm or more but not exceeding 10 mm: Containing by weight 2,5 % or more of nickel 3.0 B Containing by weight less than 2,5 % of nickel 3.0 B Of a thickness of 3 mm or more but less than 4,75 mm 3.0 B Of a thickness of less than 3 mm 3.0 B - Not further worked than cold-rolled (cold- reduced): Of a thickness of 4,75 mm or more 3.0 B Of a thickness of 3 mm or more but less than 4,75 mm: Containing by weight 2,5 % or more of nickel 3.0 B Containing by weight less than 2,5 % of nickel 3.0 B Of a thickness exceeding 1 mm but less than 3 mm: Containing by weight 2,5 % or more of nickel 3.0 B Containing by weight less than 2,5 % of nickel 3.0 B Of a thickness of 0,5 mm or more but not exceeding 1 mm: Containing by weight 2,5 % or more of nickel 3.0 B Containing by weight less than 2,5 % of nickel 3.0 B Of a thickness of less than 0,5 mm: Containing by weight 2,5 % or more of nickel 3.0 B Containing by weight less than 2,5 % of nickel 3.0 B Other: Not further worked than surface-treated, including cladding, or 3.0 B simply cut into shapes other than rectangular (including square) Other Flat-rolled products of stainless steel, of a width of less than 600 mm: - Not further worked than hot-rolled: Of a thickness of 4,75 mm or more 3.0 B Of a thickness of less than 4,75 mm 3.0 B Not further worked than cold-rolled (cold- reduced): Of a width exceeding 500 mm 3.0 B - - Of a width not exceeding 500 mm: Of a thickness of 3 mm or more, containing by weight: ,5 % or more of nickel Less than 2,5 % of nickel Of a thickness exceeding 0,35 mm but less than 3 mm, containing by weight: ,5 % or more of nickel Less than 2,5 % of nickel Of a thickness not exceeding 0,35 mm, containing by weight: ,5 % or more of nickel Less than 2,5 % of nickel Other: - - Of a width exceeding 500 mm:

5 Lunes 26 de junio de 2000 DIARIO OFICIAL (Quinta Sección) Not further worked than surface-treated, including cladding 3.0 B Other - - Of a width not exceeding 500 mm: Not further worked than surface-treated, including cladding: Hot-rolled, not further worked than clad 3.0 B Other Other Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel: Containing by weight 2,5 % or more of nickel 3.0 B Containing by weight less than 2,5 % of nickel 3.0 B Other bars and rods of stainless steel; angles, shapes and sections of stainless steel: - Bars and rods, not further worked than hot- rolled, hot-drawn or extruded: Of circular cross-section: Of a diameter of 80 mm or more, containing by weight: ,5 % or more of nickel 3.0 B Less than 2,5 % of nickel 3.0 B Of a diameter of 25 mm or more, but less than 80 mm, containing by weight: ,5 % or more of nickel 3.0 B Less than 2,5 % of nickel 3.0 B Of a diameter of less than 25 mm, containing by weight: ,5 % or more of nickel 3.0 B Less than 2,5 % of nickel 3.0 B Containing by weight 2,5 % or more of nickel 3.0 B Containing by weight less than 2,5 % of nickel 3.0 B Bars and rods, not further worked than cold- formed or cold-finished: - - Of a circular cross-section: Of a diameter of 80 mm or more, containing by weight: ,5 % or more of nickel Less than 2,5 % of nickel Of a diameter of 25 mm or more, but less than 80 mm, containing by weight: ,5 % or more of nickel Less than 2,5 % of nickel Of a diameter of less than 25 mm, containing by weight: ,5 % or more of nickel Less than 2,5 % of nickel - - Other, containing by weight: ,5 % or more of nickel Less than 2,5 % of nickel Other bars and rods: Hot-rolled, hot-drawn or extruded, not further worked than clad 2.5 B - - Forged, containing by weight: ,5 % or more of nickel Less than 2,5 % of nickel Other Angles, shapes and sections: Not further worked than hot-rolled, hot-drawn or extruded 3.0 B Hot-rolled, hot-drawn or extruded, not further worked than clad 2.5 B Not further worked than cold-formed or cold-finished: Obtained from flat-rolled products Other

6 6 (Quinta Sección) DIARIO OFICIAL Lunes 26 de junio de Other Wire of stainless steel: - Containing by weight 2,5 % or more of nickel: Containing by weight 28% or more but not more than 31% of nickel and 20% or more but not more than 22% of chromium Other - Containing by weight less than 2,5 % of nickel: Containing by weight 13% or more but not more than 25% of chromium and 3,5% or more but not more than 6% of aluminium Other IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL: Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel: Ingots and other primary forms 1.3 A Other: - - Of rectangular (including square) cross- section: Hot-rolled or obtained by continuous casting: The width measuring less than twice the thickness: Of high-speed steel 1.6 A Containing by weight not more than 0,7% of carbon, 0,5% 1.6 A or more but not more than 1,2% of manganese and 0,6% or more but not more than 2,3% of silicon; containing by weight 0,0008% or more of boron with any other elements less than the minimum content referred to in note 1 f) to this chapter Other 1.6 A Other 1.6 A Forged Hot-rolled or obtained by continuous casting: Containing by weight not less than 0,9% but not more than 3.0 B 1,15% of carbon, not less than 0,5% but not more than 2% of chromium and, if present, not more than 0,5% of molybdenum Other 3.0 B Forged: Of circular or polygonal cross-section Other Flat-rolled products of other alloy steel, of a width of 600 mm or more: - Of silicon-electrical steel: Grain-oriented 3.0 B Hot-rolled 3.0 B Cold-rolled 3.0 B Of high speed steel: Not further worked than rolled; not further worked than 3.0 B surface-treated, including cladding or simply cut into shapes other than rectangular (including square) Other Other, not further worked than hot-rolled, in coils 3.0 B Other, not further worked than hot-rolled, not in coils: Of a thickness exceeding 15 mm 3.0 B Of a thickness of 4,75 mm or more but not exceeding 15 mm 3.0 B Of a thickness less than 4,75 mm 3.0 B Other, not further worked than cold-rolled (cold- reduced) 3.0 B - Other: Electrolytically plated or coated with zinc: Not further worked than surface-treated, including cladding or 3.0 B simply cut into shapes other than rectangular (including square) Other

7 Lunes 26 de junio de 2000 DIARIO OFICIAL (Quinta Sección) Otherwise plated or coated with zinc: Not further worked than surface-treated, including cladding or 3.0 B simply cut into shapes other than rectangular (including square) Other Not further worked than surface-treated, including cladding or 3.0 B simply cut into shapes other than rectangular (including square) Other Flat-rolled products of other alloy steel, of a width of less than 600 mm: - Of silicon-electrical steel: Grain-oriented: Of a width exceeding 500 mm 3.0 B Of a width not exceeding 500 mm Not further worked than hot-rolled 3.0 B Of a width exceeding 500 mm 3.0 B Of a width not exceeding 500 mm Of high-speed steel: Not further worked than hot-rolled; of a width not exceeding B mm, hot-rolled, not further worked than clad; of a width exceeding 500 mm, not further worked than cold-rolled (cold- reduced) or not further worked than surface- treated, including cladding Other - Other: Not further worked than hot-rolled: Of a thickness of 4,75 mm or more 3.0 B Of a thickness of less than 4,75 mm 3.0 B Not further worked than cold-rolled (cold- reduced): Of a width exceeding 500 mm 3.0 B Of a width not exceeding 500 mm Electrolytically plated or coated with zinc: Of a width not exceeding 500 mm, hot-rolled, not further 3.0 B worked than clad; of a width exceeding 500 mm, not further worked than surface-treated, including cladding Other Otherwise plated or coated with zinc: Of a width not exceeding 500 mm, hot-rolled, not further 3.0 B worked than clad; of a width exceeding 500 mm, not further worked than surface-treated, including cladding Other Of a width not exceeding 500 mm, hot-rolled, not further 3.0 B worked than clad; of a width exceeding 500 mm, not further worked than surface-treated, including cladding Other Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel: Of high-speed steel 3.0 B Of silico-manganese steel 3.0 B Other: Containing by weight 0,0008 % or more of boron with any other 3.0 B element less than the minimum content referred to in note 1 f) to this chapter Containing by weight 0,9% or more but not more than 1,15% of 3.0 B carbon, 0,5% or more but not more than 2% of chromium and, if present, not more than 0,5% of molybdenum Other 3.0 B

8 8 (Quinta Sección) DIARIO OFICIAL Lunes 26 de junio de Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: Bars and rods, of high-speed steel: Not further worked than hot-rolled, hot-drawn or extruded 3.0 B Hot-rolled, hot-drawn or extruded, not further worked than clad 2.5 B Forged Other Bars and rods, of silico-manganese steel: - - Not further worked than hot-rolled, hot-drawn or extruded: Of rectangular (other than square) cross- section, rolled on 3.0 B four faces Other 3.0 B Hot-rolled, hot-drawn or extruded, not further worked than clad 2.5 B Other Other bars and rods, not further worked than hot- rolled, hot-drawn or extruded: Of tool steel 3.0 B - - Containing by weight 0,9% or more but not more than 1,15% of carbon, 0,5% or more but not more than 2% of chromium and, if present, no more than 0,5% of molybdenum: Of circular cross-section of a diameter of 80 mm or more 3.0 B Other 3.0 B Of circular cross-section of a diameter of: mm or more 3.0 B Less than 80 mm 3.0 B Of rectangular (other than square) cross- section, rolled on 3.0 B four faces Other 3.0 B Other bars and rods, not further worked than forged: Of tool steel Other Other bars and rods, not further worked than cold-formed or coldfinished: Of tool steel Containing by weight 0,9% or more but not more than 1,15% of carbon, 0,5% or more but not more than 2% of chromium and, if present, not more than 0,5% of molybdenum Of circular cross-section, of a diameter of: mm or more Less than 80 mm Of rectangular (other than square) cross- section, rolled on four faces Other Other bars and rods: Hot-rolled, hot-drawn or extruded, not further worked than clad 2.5 B Of tool steel Other Angles, shapes and sections: Not further worked than hot-rolled, hot-drawn or extruded 3.0 B Hot-rolled, hot-drawn or extruded, not further worked than clad 2.5 B Not further worked than cold-formed or cold-finished Other

9 Lunes 26 de junio de 2000 DIARIO OFICIAL (Quinta Sección) Hollow drill bars and rods: Of alloy steel 3.0 B Of non-alloy steel 1.9 B Wire of other alloy steel: Of high-speed steel Of silico-manganese steel Other: Containing by weight 0,9% or more but not more than 1,15% of carbon, 0,5% or more but not more than 2% of chromium and, if present, not more than 0,5% of molybdenum Other 73 ARTICLES OF IRON OR STEEL Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel: Sheet piling 2.2 B Angles, shapes and sections Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails: Rails: Current-conducting, with parts of non-ferrous metal New: Of a weight per m of 20 kg or more 2.2 B Of a weight per m of less than 20 kg 2.2 B Used 1.3 A Sleepers (cross-ties) 1.9 B Switch blades, crossing frogs, point rods and other crossing pieces Fish-plates and sole plates: Rolled 1.9 B Other Other: Check-rails 1.9 B Rail clips, bedplates and ties Other Tubes, pipes and hollow profiles, of cast iron: Tubes and pipes of a kind used in pressure systems 1.1 A Other 1.1 A Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel: Line pipe of a kind used for oil or gas pipelines: Of an external diameter not exceeding 168,3 mm Of an external diameter exceeding 168,3 mm, but not exceeding 406,4 mm Of an external diameter exceeding 406,4 mm - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: Drill pipe Of an external diameter not exceeding 406,4 mm Of an external diameter exceeding 406,4 mm - Other, of circular cross-section, of iron or non- alloy steel: Cold-drawn or cold-rolled (cold-reduced):

10 10 (Quinta Sección) DIARIO OFICIAL Lunes 26 de junio de With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft Precision tubes Other Unworked, straight and of uniform wall- thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall-thicknesses With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft Of an external diameter exceeding 421 mm and of a wall-thickness exceeding 10,5 mm Threaded or threadable tubes (gas pipe): Plated or coated with zinc Other Other, of an external diameter: Not exceeding 168,3 mm Exceeding 168,3 mm, but not exceeding 406,4 mm Exceeding 406,4 mm - Other, of circular cross-section, of stainless steel: Cold-drawn or cold-rolled (cold-reduced): With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft Other Unworked, straight and of uniform wall- thickness, for use solely in the manufacture of tubes and pipes with other crosssections and wall-thicknesses With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft Of an external diameter not exceeding 406,4 mm Of an external diameter exceeding 406,4 mm - Other, of circular cross-section, of other alloy steel: Cold-drawn or cold-rolled (cold-reduced): Straight and of uniform wall-thickness, of alloy steel containing by weight not less than 0,9% but not more than 1,15% of carbon, not less than 0,5% but not more than 2% of chromium and, if present, not more than 0,5% of molybdenum, of a length: Not exceeding 4,5 m Exceeding 4,5 m With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft Precision tubes Other Unworked, straight and of uniform wall- thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall-thicknesses Other, straight and of uniform wall- thickness, of alloy steel containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5% of molybdenum, of a length: Not exceeding 4,5 m Exceeding 4,5 m

11 Lunes 26 de junio de 2000 DIARIO OFICIAL (Quinta Sección) With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft Of an external diameter not exceeding 168,3 mm Of an external diameter exceeding 168,3 mm, but not exceeding 406,4 mm Of an external diameter exceeding 406,4 mm Other: With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft Other Other tubes and pipes (for example, welded, riveted or similary closed), having circular cross- sections, the external diameter of which exceeds 406,4 mm, of iron or steel: - Line pipe of a kind used for oil or gas pipelines: Longitudinally submerged arc welded Other, longitudinally welded Other Casing of a kind used in drilling for oil or gas: Longitudinally welded Other - Other, welded: Longitudinally welded Other Other Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel: Line pipe of a kind used for oil or gas pipelines: - - Longitudinally welded, of an external diameter of: Not more than 168,3 mm More than 168,3 mm, but not more than 406,4 mm Spirally welded Casing and tubing of a kind used in drilling for oil or gas Other, welded, of circular cross-section, of iron or non-alloy steel: With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft Precision tubes, with a wall thickness: Not exceeding 2 mm Exceeding 2 mm Threaded or threadable tubes (gas pipe): Plated or coated with zinc Other Other, of an external diameter: Not exceeding 168,3 mm: Plated or coated with zinc Other Exceeding 168,3 mm, but not exceeding 406,4 mm Other, welded, of circular cross-section, of stainless steel: With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft Cold-drawn or cold-rolled (cold-reduced) Other Other, welded, of circular cross-section, of other alloy steel: With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft

12 12 (Quinta Sección) DIARIO OFICIAL Lunes 26 de junio de Precision tubes Other Other, welded, of non-circular cross-section: With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft Of rectangular (including square) cross- section, with a wall thickness: Not exceeding 2 mm Exceeding 2 mm Of other sections Other Tube or pipe fittings (for example couplings, elbows, sleeves), of iron or steel: - Cast fittings: Of non-malleable cast iron: Of a kind used in pressure systems 1.2 A Other 1.2 A Of malleable cast iron 1.2 A Other 1.2 A - Other, of stainless steel: Flanges 1.2 A Threaded elbows, bends and sleeves: Sleeves Elbows end bends 1.2 A Butt welding fittings: Elbows and bends 1.2 A Other 1.2 A Threaded 1.2 A For welding 1.2 A Other 1.2 A - Other: Flanges 1.2 A Threaded elbows, bends and sleeves: Sleeves Elbows and bends 1.2 A Butt welding fittings: With greatest external diameter not exceeding 609,6 mm: Elbows and bends 1.2 A Other 1.2 A With greatest external diameter exceeding 609,6 mm: Elbows and bends 1.2 A Other 1.2 A Threaded 1.2 A For welding 1.2 A Other 1.2 A Structures (excluding prefabricated buildings of heading No 9406) and parts of structures (for example, bridges and bridgesections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds fordoors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel: Bridges and bridge-sections Towers and lattice masts

13 Lunes 26 de junio de 2000 DIARIO OFICIAL (Quinta Sección) Doors, windows and their frames and thresholds for doors Equipment for scaffolding, shuttering, propping or pit-propping: Mine supports Other Other: Weirs, sluices, lock-gates, landing stages, fixed docks and other maritime and waterway structures Solely or principally of sheet: Panels comprising two walls of profiled (ribbed) sheet with an insulating core Other Other Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 litres, whether or not lined or heatinsulated, but not fitted with mechanical or thermal equipment: For gases (other than compressed or liquefied gas) - For liquids: Lined or heat-insulated - - Other, of a capacity: Exceeding litres Not exceeding litres For solids Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment: Of a capacity of 50 litres or more 1.0 A - Of a capacity of less than 50 litres: Cans which are to be closed by soldering or crimping: Cans of a kind used for preserving food 1.0 A Cans of a kind used for preserving drink 1.0 A Other, with a wall thickness of: Less than 0,5 mm 1.0 A ,5 mm or more 1.0 A With a wall thickness of less than 0,5 mm 1.0 A With a wall thickness of 0,5 mm or more 1.0 A Containers for compressed or liquefied gas, of iron or steel: Seamless - Other, of a capacity of: Less than litres litres or more Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated: Stranded wire, ropes and cables: With fittings attached, or made up into articles, for use in civil aircraft Of stainless steel 1.9 B Other, with a maximum cross-sectional dimension: Not exceeding 3 mm: Plated or coated with copper-zinc alloys (brass) 1.9 B Other 1.9 B Exceeding 3 mm: Stranded wire: Not coated 1.9 B Coated:

14 14 (Quinta Sección) DIARIO OFICIAL Lunes 26 de junio de Plated or coated with zinc 1.9 B Other 1.9 B Ropes and cables (including locked coil ropes): Not coated or only plated or coated with zinc, with a maximum cross- sectional dimension: Exceeding 3 mm but not exceeding 12 mm 1.9 B Exceeding 12 mm but not exceeding 24 mm 1.9 B Exceeding 24 mm but not exceeding 48 mm 1.9 B Exceeding 48 mm 1.9 B Other 1.9 B Other: With fittings attached, or made up into articles for use in civil aircraft Other 1.9 B Barbed wire of iron or steel; twisted hoop or single flat wire, 3.1 B barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel: - Woven cloth: Endless bands for machinery, of stainless steel Other endless bands for machinery Other woven cloth, of stainless steel Other Grill, netting and fencing, welded at the intersection, of wire with a maximum cross- sectional dimension of 3 mm or more and having a mesh size of 100 cm$2 or more: Of ribbed wire Other - Other grill, netting and fencing, welded at the intersection: Plated or coated with zinc Other - Other cloth, grill, netting and fencing: Plated or coated with zinc: Hexagonal netting Other Coated with plastics: Hexagonal netting Other Other Expanded metal Chain and parts thereof, of iron or steel: - Articulated link chain and parts thereof: Roller chain: Of a kind used for cycles and motor-cycles Other Other chain Parts Skid chain - Other chain: Stud-link Other, welded link: The constituent material of which has a maximum cross-sectional dimension of 16 mm or less The constituent material of which has a maximum cross-sectional dimension of more than 16 mm Other Other parts Anchors, grapnels and parts thereof, of iron or steel

15 Lunes 26 de junio de 2000 DIARIO OFICIAL (Quinta Sección) Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading No 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper: Drawing pins - Other: - - Cold-pressed from wire: Nails in strips or coils Nails of steel containing by weight 0,5 % or more of carbon, hardened Plated or coated with zinc Other Other Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of iron or steel: - Threaded articles: Coach screws 1.5 A Other wood screws: Of stainless steel 1.5 A Other 1.5 A Screw hooks and screw rings 1.5 A Self-tapping screws: Of stainless steel 1.5 A Spaced-thread screws 1.5 A Other 1.5 A Other screws and bolts, whether or not with their nuts or washers: Screws, turned from bars, rods, profiles, or wire, of solid 1.4 A section, of a shank thickness not exceeding 6 mm For fixing railway track construction material 1.5 A Without heads: Of stainless steel 1.5 A Other, with a tensile strength: Of less than 800 MPa 1.5 A Of 800 MPa or more 1.5 A With heads: Slotted and cross-recessed screws: Of stainless steel 1.5 A Other 1.5 A Hexagon socket head screws: Of stainless steel 1.5 A Other 1.5 A Hexagon bolts: Of stainless steel 1.5 A Other, with a tensile strength: Of less than 800 MPa 1.5 A Of 800 MPa or more 1.5 A Other 1.5 A Nuts: Turned from bars, rods, profiles, or wire, of solid section, of a 1.4 A hole diameter not exceeding 6 mm Of stainless steel 1.5 A - -

16 16 (Quinta Sección) DIARIO OFICIAL Lunes 26 de junio de Self-locking nuts 1.5 A Other, with an inside diameter: Not exceeding 12 mm 1.5 A Exceeding 12 mm 1.5 A Other 1.5 A - Non-threaded articles: Spring washers and other lock washers 1.4 A Other washers 1.4 A Rivets 1.4 A Cotters and cotter-pins 1.4 A Other 1.4 A Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included: Sewing, darning or embroidery needles 1.1 A Safety pins 1.1 A Other pins 1.1 A Other 1.0 A Springs and leaves for springs, of iron or steel: Leaf-springs and leaves therefor: - - Hot-worked: Laminated springs and leaves therefor Other Other Helical springs: Hot-worked Coil compression springs Coil tension springs Other Other: Flat spiral springs Discs springs Other Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel: - Cooking appliances and plate warmers: For gas fuel or for both gas and other fuels: With oven, including separate ovens Other For liquid fuel For solid fuel - Other appliances: For gas fuel or for both gas and other fuels: With exhaust outlet Other For liquid fuel: With exhaust outlet Other For solid fuel Parts Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel:

17 Lunes 26 de junio de 2000 DIARIO OFICIAL (Quinta Sección) 17 - Radiators and parts thereof: Of cast iron 1.1 A Other 1.1 A Other: Air heaters and not air distributors (excluding parts thereof), for use in civil aircraft Other 1.1 A Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel: Iron or steel wool; pot scourers and scouring or polishing pads, 1.1 A gloves and the like - Other: Of cast iron, not enamelled 1.1 A Of cast iron, enamelled 1.1 A Of stainless steel: Articles for table use 1.1 A Other 1.1 A Of iron (other than cast iron) or steel, enamelled: Articles for table use 1.1 A Other 1.1 A Articles for table use 1.1 A Varnished or painted 1.1 A Other 1.1 A Sanitary ware and parts thereof, of iron or steel: Sinks and wash basins, of stainless steel: For use in civil aircraft Other - Baths: Of cast iron, whether or not enamelled 1.1 A Other 1.1 A Other, including parts: Sanitary ware (excluding parts thereof), for use in civil aircraft Other 1.1 A Other cast articles of iron or steel: Of non-malleable cast iron: Surface and valve boxes For sewage, water, etc., systems Other - Other: Grinding balls and similar articles for mills 0.9 A Of malleable cast iron 0.9 A Other 0.9 A Other articles of iron or steel: - Forged or stamped, but not further worked: Grinding balls and similar articles for mills 0.9 A Open-die forged 0.9 A Other 0.9 A Articles of iron or steel wire: For use in civil aircraft Small cages and aviaries 0.9 A Wire baskets 0.9 A

18 18 (Quinta Sección) DIARIO OFICIAL Lunes 26 de junio de Other 0.9 A Other: Snuff boxes, cigarette cases, cosmetic and powder boxes and 0.9 A cases, and similar pocket articles Ladders and steps 0.9 A Pallets and similar platforms for handling goods 0.9 A Reels for cables, piping and the like 0.9 A Non-mechanical ventilators, guttering, hooks and like articles 0.9 A used in the building industry Perforated buckets and similar articles of sheet used to filter 0.9 A water at the entrance to drains Connectors for optical fibre cables 0.9 A - - Other articles of iron or steel: Open-die forged 0.9 A Closed-die forged 0.9 A Sintered 0.9 A Other 0.9 A 74 COPPER AND ARTICLES THEREOF Copper mattes; cement copper (precipitated copper): Copper mattes Cement copper (precipitated copper) Unrefined copper; copper anodes for electrolytic refining Refined copper and copper alloys, unwrought: - Refined copper: Cathodes and sections of cathodes Wire-bars Billets Other - Copper alloys: Copper-zinc base alloys (brass) Copper-tin base alloys (bronze) Copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) Other copper alloys (other than master alloys of heading No 7405) Copper waste and scrap: Of refined copper - Of copper alloys: Of copper-zinc base alloys (brass) Other Master alloys of copper Copper powders and flakes: Powders of non-lamellar structure Powders of lamellar structure; flakes Copper bars, rods and profiles: Of refined copper 3.3 B - Of copper alloys: Of copper-zinc base alloys (brass): Bars and rods 3.3 B Profiles 3.3 B Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver): Of copper-nickel base alloys (cupro-nickel) 3.3 B Of copper-nickel-zinc base alloys (nickel silver) 3.3 B Other 3.3 B Copper wire: - Of refined copper:

19 Lunes 26 de junio de 2000 DIARIO OFICIAL (Quinta Sección) Of which the maximum cross-sectional dimension exceeds 3.3 B 6 mm Of which the maximum cross-sectional dimension exceeds 3.3 B 0,5 mm Of which the maximum cross-sectional dimension does not 3.3 B exceed 0,5 mm - Of copper alloys: Of copper-zinc base alloys (brass) 3.3 B Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc 3.3 B base alloys (nickel silver) Other 3.3 B Copper plates, sheets and strip, of a thickness exceeding 0,15 mm: - Of refined copper: In coils 3.3 B Other 3.3 B - Of copper-zinc base alloys (brass): In coils 3.3 B Other 3.3 B - Of copper-tin base alloys (bronze): In coils 3.3 B Other 3.3 B Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver): Of copper-nickel base alloys (cupro-nickel) 3.3 B Of copper-nickel-zinc base alloys (nickel silver) 3.3 B Of other copper alloys: In coils 3.3 B Other 3.3 B Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,15 mm: - Not backed: Of refined copper 3.6 B Of copper alloys 3.6 B - Backed: Of refined copper 3.6 B Of copper alloys 3.6 B Copper tubes and pipes: Of refined copper: - - Straight, of a wall thickness: Exceeding 0,6 mm 3.3 B Not exceeding 0,6 mm 3.3 B Other 3.3 B - Of copper alloys: Of copper-zinc base alloys (brass): Straight 3.3 B Other 3.3 B Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc 3.3 B base alloys (nickel silver) Straight 3.3 B Other 3.3 B Copper tube or pipe fittings (for example, couplings, elbows, sleeves):

20 20 (Quinta Sección) DIARIO OFICIAL Lunes 26 de junio de Of refined copper 3.6 B Of copper alloys 3.6 B Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated: With fittings attached, for use in civil aircraft - Other: Of refined copper 3.6 B Of copper alloys 3.6 B Cloth (including endless bands), grill and netting, of copper wire; expanded metal, of copper: Cloth 3.0 B Other 3.0 B Nails, tacks, drawing pins, staples (other than those of heading No 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper: Nails and tacks, drawing pins, staples and similar articles 2.8 B - Other articles, not threaded: Washers (including spring washers) 2.1 B Other 2.1 B - Other threaded articles: Screws for wood 2.1 B Other screws; bolts and nuts 2.1 B Other 2.1 B Copper springs 2.8 B Cooking or heating apparatus of a kind used for domestic 2.8 B purposes, non-electric, and parts thereof, of copper Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper: - Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like: Pot scourers and scouring or polishing pads, gloves and the like 2.1 B Other 2.1 B Sanitary ware and parts thereof 2.1 B Other articles of copper: Chain and parts thereof 2.1 B - Other: Cast, moulded, stamped or forged, but not further worked 2.1 B Other 2.1 B 75 NICKEL AND ARTICLES THEREOF Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy: Nickel mattes Nickel oxide sinters and other intermediate products of nickel metallurgy Unwrought nickel: Nickel, not alloyed Nickel alloys Nickel waste and scrap: Of nickel, not alloyed Of nickel alloys Nickel powders and flakes Nickel bars, rods, profiles and wire: