2003/04 price list for CMM products for Czech (in Kč)

Transcription

1 2003/04 price list for CMM products for Czech (in Kč) This price list is effective for shipments from 1st March 2003 All prices are subject to our standard conditions of Tender and Sales, a copy of which will be furnished on request. All prices quoted are in Czech Kronor For Czech sales carriage is included. Renishaw SRO reserves the right to make amendments to this price list wherever necessary Authorised by on behalf of Renishaw SRO.: Peter Johnson Director & General Manager, UK sales division.

2 Contents PAGE NO. Touch trigger probes - without stylus changing TP7M / TP7M EP probes 1-1 TP2 5-W probe 1-1 TP1 (S) probe 1-1 TP6 and TP6A probes 1-1 Touch trigger probes - with stylus changing TP200 and TP200B modular probes 2-1 TP20 and TP20 NI modular probes 2-2 TP800-2 modular probe 2-3 Scanning probes SP25M compact scanning probe system 3-1 SP80 high accuracy scanning probe 3-2 SP600M and SP600Q scanning probes 3-2 Optical trigger probes OTP6M optical trigger probe 4-1 Manual probe heads with integral M8/Autojoint probe mount MIH and MIH-S manual indexing probe heads 5-1 MH8 manual indexing probe head 5-1 PH6 and PH6M fixed probe heads 5-1 PH1 manual articulating probe head 5-1 PH5 fixed probe head 5-1 Manual probe heads with integral TP20 stylus module mount MH20 manual articulating probe head with integral TP20 stylus module mount 6-1 MH20i manual indexing probe head with integral TP20 stylus module mount 6-1 Motorised probe heads - servo type PHS1 motorised (servo type) probe head 7-1 Motorised probe heads - indexing type 8-1 PH10 motorised indexing probe heads Touch trigger probe interfaces and probe head controllers Touch trigger probe interfaces and probe head controllers 9-1 UCC1 universal CMM controller 9-2 Change / storage racks for autojointed probes ACR1 autochange rack 10-1 ACR3 autochange rack 10-1 MAPS manual autojoint probe stand 10-1 Extension bars Extension bars - autojoint type 11-1 Extension bars - M8 to M8 type 11-1 Extension bars accessories 11-1

3 Contents (continued) PAGE NO. Accessories MRS modular rack system 12-1 UDS universal datum sphere 12-1 MCG machine checking guage 12-2 Cables 12-2 Tools 12-4 Boxes 12-4 Upgrade offers Motorised probe head upgrades 13-1 Manual probe head upgrades 13-2 Touch trigger probe upgrades 13-2 Appendices Appendix A - completed part no.s for listed head / shank / cable 14-1 Appendix B - completed part no.s for PH6 head / shank / cable 14-2 Appendix C - completed part no.s for MH20 head / shank / cable 14-2 Appendix D - list of shanks per CMM type 14-3 Appendix E - Quick reference price list - aphabetically listed 14-4

4 Touch trigger probes without stylus module changing 1-1 TP7M / TP7M EP probes Autojointed, Ø 25 mm precision touch probe. TP7M probe kits TP7M probe kit A Kč TP7M probe & stylus kit A Kč TP7M EP probe kits TP7M EP probe kit A Kč TP7M EP probe & stylus kit A Kč PI7-2 probe interface PI7-2 probe interface for TP7M A Kč TP2 5-W probe M8 threaded Ø 13 mm kinematic touch trigger probe. TP2-5W probe kits TP2-5W probe and TK5 tool kit A Kč TP1 (S) probe Shank mounted Ø 46 mm kinematic touch trigger probe. TP1 probe sensor kits TP1 (S) probe (includes required shank - see appendix A for complete part number) TP1 (SM) probe (includes required shank - see appendix A for complete part number) PART NO. A *** A *** PRICE (Kč) Kč Kč TP6 and TP6A probes M8 threaded Ø 25 mm kinematic touch trigger probe. TP6 probe sensor kits TP6 probe A Kč TP6H (high force) probe A Kč TP6A (Autojointed ) probe A Kč

5 TP200 and / TP200B modular probe probes system M8 threaded, Ø 13 mm precision touch probe with repeatable styus changing. TP200 probe kits TP200 kit 1 (including standard force stylus module) A Kč TP200 kit 2 (including low force stylus module) A Kč TP200B probe kits Reduced sensitivity version of TP200 TP200B kit 1 (including standard force stylus module) A Kč TP200B probe body only A Kč TP200 stylus modules TP200 standard force stylus module A Kč TP200 low force stylus module A Kč TP200 EO (extended overtravel) stylus module A Kč Touch trigger probes with stylus module changing 2-1 TP200 probe interface PI200 probe interface for TP1, TP2, TP6, TP20 and TP200 A Kč SCR200 stylus changing rack SCR200 - active 6 port change rack for use with TP200 includes 3 x standard force stylus modules SCR200 - active 6 port change rack for use with TP200 includes 3 x low force stylus modules MSR1 module storage rack MSR1 - manual storage rack for TP20 modules with wall mounting bracket MSR1 - manual storage rack for TP20 modules with leg and mounting base A A A A Kč Kč Kč Kč TP200 accessories M12 location piece M Kč PL63 5 m SCR200 to PI200 cable A Kč PL64 10 m SCR200 to PI200 cable A Kč PL65 20 m SCR200 to PI200 cable A Kč PL97 (S) m dual adaptor cable for connecting 2 x SCR200 racks to PI200 (requires 2 x cables PL63/64/65 in addition) A Kč

6 Touch trigger probes with stylus module changing 2-2 TP20 and TP20 NI modular probes M8 threaded, Ø 13 mm, kinematic touch trigger probe with repeatable stylus changing. TP20 probe kits TP20 probe kit including 2 x standard force modules A Kč TP20 probe kit including 1 x standard force & 1 x medium force A Kč module TP20 probe kit including 1 x standard force & 1 x extended force A Kč module TP20 probe kit including 2 x medium force modules A Kč TP20 probe kit including 1 x medium force & 1 x extended force A Kč module TP20 probe kit including 2 x extended force modules A Kč TP20 probe kit including 1 x low force & 1 x standard force module A Kč TP20 probe kit including 1 x low force & 1 x medium force module A Kč TP20-6W probe kit including 1 x 6 way sensing module A Kč TP20 NI probe kits The following probes need to be inhibited by the metrology software. TP20 probe kit including 2 x standard force modules A Kč TP20 probe kit including 1 x standard force & 1 x medium force A Kč module TP20 probe kit including 1 x standard force & 1 x extended force A Kč module TP20 probe kit including 2 x medium force modules A Kč TP20 probe kit including 1 x medium force & 1 x extended force A Kč module TP20 probe kit including 2 x extended force modules A Kč TP20 probe kit including 1 x low force & 1 x standard force module A Kč TP20 probe kit including 1 x low force & 1 x medium force module A Kč TP20 stylus modules TP20 standard force module kit A Kč TP20 medium force module kit A Kč TP20 extended force module kit A Kč TP20 low force module kit A Kč TP20 6 way probe module A Kč EM1 standard force module (71 mm long) A Kč EM2 standard force module (96 mm long) A Kč EM1 & EM2 standard force module kit A Kč MCR20 module changing rack MCR20 rack for automatic stylus changing with TP20 (rack only) A Kč MCR20 rack for automatic stylus changing with TP20 (includes 2 x A Kč standard force modules) MCR20 rack for automatic stylus changing with TP20 (includes 1 x A Kč standard force & 1 x medium force modules) MCR20 rack for automatic stylus changing with TP20 (includes 2 x A Kč medium force modules) MCR20 rack for automatic stylus changing with TP20 (includes 1 x A Kč extended force & 1 x medium force modules) MCR20 rack for automatic stylus changing with TP20 (includes 2 x A Kč extended force modules) MCR20 rack for automatic stylus changing with TP20 (includes 1 x standard force & 1 x low force modules) A Kč

7 TP20 and TP20 NI modular probes (continued) MCR20 probe stylus module change rack kits (continued) MCR20 rack for automatic stylus changing with TP20 (includes 1 x medium force & 1 x low force modules) PART NO. A PRICE (Kč) Kč MSR1 module storage rack MSR1 - manual storage rack for TP20 modules with wall mounting A Kč bracket MSR1 - manual storage rack for TP20 modules with leg and A Kč mounting base M12 location piece M Kč Touch trigger probes with stylus module changing 2-3 TP800-2 modular probe Shank mounted, Ø 80 mm ultra precision touch probe with repeatable stylus changing. TP800-2 probe kits TP800-2 system kit (includes probe, stylus module, PI800 probe A Kč interface and basic stylus kit) TP800-2 probe kit (including probe and stylus module) A Kč SH800 stylus holders TP800-2 stylus module A Kč PI800-2 dedicated probe interface PI800-2 probe interface for TP800 A Kč SCR800 stylus changing rack kits SCR800-3 port stylus changing rack A Kč SCR800-4 port stylus changing rack A Kč

8 Scanning probes 3-1 SP25M compact scanning probe system Autojointed, Ø 25 mm scanning probe with repeatable stylus and module changing. PART NO. SP25M scanning probe kits SP25M special scanning and touch trigger probing full combination A kit includes 1 x SP25M scanning probe kit #1, 1 x SM25-2 scanning module kit, 1 x SM25-3 scanning module kit and 1 x TM25-20 TTP module adaptor only SP25M scanning probe sensor kit #1 (entry level kit) includes 1 x A SP25M probe body and 1 x SM25-1 scanning module kit SP25M scanning probe sensor kit #2 (entry level kit) includes 1 x A SP25M probe body and 1 x SM25-2 scanning module kit SP25M scanning probe sensor kit #3 (entry level kit) includes 1 x A SP25M probe body and 1 x SM25-3 scanning module kit PRICE (Kč) Kč Kč Kč Kč SP25M probe module kits SM25-1 scanning module kit includes 1 x SM25-1 and 2 x SH25-1 A Kč SM25-2 scanning module kit includes 1 x SM25-2 and 2 x SH25-2 A Kč SM25-3 scanning module kit includes 1 x SM25-3 and 2 x SH25-3 A Kč TM25-20 touch trigger probe module adaptor only A Kč TM25-20 touch trigger probe module adaptor kit #1 includes 1 x TM25-20 and 2 x TP20 'STD' modules A Kč SP25M stylus holders SH25-1 stylus holder only A Kč SH25-2 stylus holder only A Kč SH25-3 stylus holder only A Kč FCR25 flexible change rack kits FCR25 flexible change rack unit (triple-port units for MRS system) A Kč includes 1 x FCR25, 3 x PA25-SH and 3 x PA25-20 FCR25-3 port standalone change rack unit includes 1 x FCR25 with A Kč integral leg for table mount, 3 x PA25-SH and 3 x PA25-20 FCR25-6 port standalone change rack unit includes 2 x FCR25 with A Kč integral leg for table mount, 3 x PA25-SH and 3 x PA25-20 FCR25 port adaptor insert kit includes 3 x PA25-SH and 3 x PA25-20 A Kč SP25M interface cards AC3 ISA interface card for use with SP25M A Kč SP25M daughter card - please note that this is a none discountable part. A Kč

9 SP80 high accuracy scanning probe Quill mounted 80 mm square ultra accurate scanning probe with repeatable stylus changing. SP80 scanning probe kits SP80 kit 1 including 1 SH80 and 1 x KM80 A Kč SP80 kit 2 including 1 x SH80, 1 x KM80, 3 x SCP80 and 1 x 600 mm A Kč MRS kit SP80 kit 3 including 1 x SH80, 1 x KM80, 4 x SCP80 and 1 x 600 mm A Kč MRS kit SP80 kit 4 including 1 x SH80, 1 x KM80, 5 x SCP80 and 1 x 1000 A Kč mm MRS kit SP80 kit 5 including 3 x SH80, 1 x KM80, 3 x SCP80 and 1 x 600 mm A Kč MRS kit SP80 kit 6 including 4 x SH80, 1 x KM80, 4 x SCP80 and 1 x 600 mm A Kč MRS kit SP80 kit 7 including 5 x SH80, 1 x KM80, 5 x SCP80 and 1 x 1000 mm MRS kit A Kč Contact scanning probes 3-2 SP80 stylus changing accessories SCP80 stylus change port for SP80 (for use with MRS system - for A Kč more details see page 6-2) SH80 stylus holder for SP80 A Kč SP80 interfaces and counter cards IU80 interpolator unit for SP80 A Kč CC6 counter card for SP80 A Kč SP80 accessories SM80 shank mount plate for SP80 A Kč KM80 standard kinematic mount for SP80 A Kč KM mm to 80 mm quill adaptor for SP80 A Kč SP600M and SP600Q scanning probes 50 mm Ø analogue scanning probe with repeatable styus changing. SP600M scanning probe kits SP600M (XE) Autojointed / multiwired scanning probe kit A Kč SP600Q scanning probe kits SP600Q (XE) quill mounted scanning probe kit A Kč SP600 stylus changing accessories SCR600 stylus change rack for use with SP600M and SP600Q A Kč SCP600 stylus change port to be mounted on MRS for use with A Kč SP600M and SP600Q SH600 stylus holder for use with SP600M and SP600Q A Kč SP600 interfaces and accessories AC2 interface card for use with SP600M and SP600Q A Kč PL112 PICS adaptor cable A Kč PL113 overtravel adaptor cable A Kč

10 Optical trigger probes OTP6M optical trigger probe Optical trigger probe from Wolf & Beck. OTP6M optical touch trigger probe OTP6M optical trigger probe system kit including OPI6 probe A Kč interface. OTP6M optical trigger probe system A Kč OPI6 probe interface for OTP6M A Kč PL101V cable A Kč 4-1

11 MIH and MIH-S manual indexing probe heads Manual indexing probe heads with in-built position memory for autojointed probes. MIH manual indexing probe head kits MIH probe head kit, includes required shank (see Appendix A for A ** Kč MIH probe head only A Kč MIH-S manual indexing probe head kits - additionally provides position feedback to PC MIH-S probe head kit, includes required shank. A Kč MIH-S probe head only A Kč MIH-S interface MIH-SI interface for MIH-S A Kč Manual probe heads with integral M8/autojoint probe mount 5-1 MH8 manual indexing probe head Manual indexing probe head for M8 threaded probes. MH8 manual indexing probe head kits MH8 probe head kit, includes required shank (see Appendix A for A-1332-**** Kč MH8 probe head only A Kč PH6 and PH6M fixed probe heads Range of fixed probe heads that offers 3 different probe mounts to cover all Renishaw probes. PH6 fixed probe head kits PH6 M8 threaded probe head kit, includes required shank and cable / A *** Kč connector (see Appendix B for PH6A Autojointed probe head kit for automatic probe and extension A Kč bar changing PH6M Autojointed probe head kit for use with multiwired probes and automatic probe and extension bar changing (see Appendix A for A ** Kč PH1 manual articulating probe head Manual articulating manual probe head for use with M8 threaded probes. PH1 manual probe head kits PH1 probe head kit, includes required shank (see Appendix A for PART NO. A-1049-**** PRICE (Kč) Kč PH5 fixed probe head Fixed manual probe head, can carry up to 5 M8 threaded probes at one time. PART NO. PH5 manual probe head kits PH5 probe head kit, includes required shank (see Appendix A for A ** PH5/1 probe head with in-built overtravel unit kit, includes required A ** shank (see Appendix A for PRICE (Kč) Kč Kč

12 Manual probe heads with integral TP20 stylus module mount 6-1 MH20 manual articulating probe head with integral TP20 stylus module mount Manual articulating head with integral TP20 kinematic mount. See appendix C for complete part numbers. MH20 manual articulating probe head kits MH20 including low force probe module A ** Kč MH20 including standard force probe module A ** Kč MH20 including medium force probe module A ** Kč MH20 including extended force probe module A ** Kč MH20i manual indexing probe head with integral TP20 stylus module mount Manual indexing head with integral TP20 kinematic mount. See appendix A for complete part numbers. MH20i manual articulating probe head kits MH20i including low force probe module (see Appendix A for A ** Kč MH20i including standard force probe module (see Appendix A for A ** Kč MH20i including medium force probe module (see Appendix A for A ** Kč MH20i including extended force probe module (see Appendix A for A ** Kč

13 PHS1 motorised (servo type) probe head Servo positioning head for extended reach with M8 threaded and Autojointed probe sensors PHS1 motorised (servo type) probe head kits PHS1 head kit 1 including PHS1 head, PHS1 arm kit 1 and ACR2 6 A Kč port rack kit PHS1 head kit 2 including PHS1 head, PHS1 arm kit 2, KM1 kit and A Kč ACR2 port pair PHS1 head only A Kč PHS1 arm kits and accessories PHS1 arm kit 1 including 1 x 750 mm arm, 1 x 500 mm arm, A Kč 1 x HAM multiwire adaptor arm and 1 x HA-8 M8 adaptor arm PHS1 arm kit 2 including 1 x 500 mm arm, 1 x 330 mm arm, A Kč 1 x HAM multiwire adaptor arm and 1 x HA-8 M8 adaptor arm PHS1 arm kit 3 including 1 x 500 mm arm, 2 x HAM multiwire adaptor A Kč arm and 1 x HA-8 M8 adaptor arm HE750, 750 mm PHS1 extended arm A Kč HE500, 500 mm PHS1 extended arm A Kč HE330, 330 mm PHS1 extended arm A Kč HA-M multiwire adaptor arm for use with PHS1 A Kč HA-8 M8 adaptor arm for use with PHS1 A Kč PHS1 extension bar wooden box A Kč Manual probe heads servo type 7-1 ACR2 autochange rack kits (for use with PHS1) ACR2 6 port rack including 3 x ACR2 port pair for use with PHS1 A Kč ACR2 port pair for use with PHS1 A Kč PHS1 interface card PHS1 interface card kit A Kč PHS1 accessories PHA1 - PH10 kinematic adaptor kit for use with PHS1 A Kč PHA2 - PH10 horizontal kinematic adaptor kit for use with PHS1 A Kč KM1 - through quill cabling kinematic kit for use with PHS1 A Kč KM2 - around quill cabling kinematic kit for use with PHS1 A Kč PL m power cable A Kč PL m comms cable A Kč PL m probe cable A Kč PL m overtravel cable A Kč PHS1 positronic connectors kit A Kč

14 Motorised probe heads indexing type 8-1 PH10 motorised indexing probe heads Industry standard motorised indexing probe heads. PH10M motorised indexing probe head kits for use with multiwired probes and extension bars PH10M probe head and shank kit (see Appendix A for complete part A-1025-**** Kč no.) PH10M probe head, AM1 and shank kit (see Appendix A for A-1025-**** Kč PH10M probe head only A Kč PH10M probe head and AM1 kit A Kč PH10MQ quill mounted, motorised indexing probe head kits for use with multiwired probes and extension bars PH10MQ probe head kit A Kč PH10T motorised indexing probe head kits for use with M8 threaded touch trigger probes and extension bars PH10T probe head, AM1 and shank kit (see Appendix A for complete A ** Kč part no.) PH10T probe head only A Kč PH10 head controllers and hand control units PHC10-2 RS232 head controller A Kč PHC10-2 IEEE head controller A Kč HCU1 hand control unit A Kč PH10 accessories and cables AM1 adjustment module for PH10M, PH10T, PH6M and MIH A Kč AM2 adjustment module for PH10MQ A Kč Small mounting plate M Kč Large mounting plate M Kč 1/3 blanking panel kit A Kč Rack mount bracket kit A Kč Link bracket kit A Kč Enclosure link bracket kit A Kč PLM8U - 6 m PH10 to PHC10 colied cable (socket) A Kč PLM9U - 4 m PH10 to PHC10 colied cable (socket) A Kč PL25 (T) 0.3 m PI200 to PI7-2 to PHC10-2 / ACC2-2 cable A Kč PL42V - 15 m multiwired plain cable A Kč PL38V - 25 m multiwired plain cable A Kč PL56V - 12 m multiwired plain cable A Kč PL44V - 8 m multiwired plain cable A Kč PL46V m multiwired plain cable A Kč PL45V m multiwired plain cable A Kč

15 Touch trigger probe interfaces and probe head controllers Interfaces and controllers for use with Renishaw's range of probe heads and probe sensors Probe interfaces PI4-2 probe interface for use with TP1, TP2, TP6 and TP20 A Kč PI7-2 probe interface for TP7M A Kč PI200 probe interface for TP1, TP2, TP6, TP20 and TP200 A Kč PI800-2 probe interface for TP800 A Kč OPI6 probe interface for OTP6M A Kč AC2 interface card for use with SP600M and SP600Q A Kč AC3 ISA interface card for use with SP25M A Kč IU80 interpolator unit for SP80 A Kč SP80 daughter card for UCC1 A Kč SP25M daughter card for UCC1 A Kč Interfaces & controllers 9-1 Probe interfaces selectors IS1-2 probe interface selector A Kč Manual head interfaces MIH-SI interface for MIH-S A Kč Head controllers PHC10-2 RS232 head controller A Kč PHC10-2 IEEE head controller A Kč Touch trigger probe accessories Gram gauge please note that this product is not subject to P-GA Kč discount. CK200 - TP20/TP200 probe cleaning kit A Kč S1 - C" Spanner, 13.0 A Kč S9 double ended 'C' spanner - please note that this product is not subject to discount. A Kč

16 Interfaces & controllers 9-2 UCC1 universal CMM controller Universal CMM controller. Please note that an official Renishaw training course must be completed before UCC1 equipment can be ordered for retrofits UCC1 kits UCC1 with joystick interface card A Kč * UCC1 with MCU1 card A Kč * UCC daughter cards PHC1050 card A Kč * PICs RS232 card A Kč * OTM3M card A Kč * SP80 daughter card A Kč * SP25M daughter card A Kč * PCI optical card (only required for upgrades or spares as it is A Kč * included in the UCC1 kits) ISA optical card (only required for upgrades or spares as it is included in the UCC1 kits) A Kč * Software upgrades UCC digitising upgrade A Kč * UCC scanning upgrade A Kč * MCU1 multifunctional hand control unit for UCC kits and accessories MCU1 joystick kit A Kč * MCU1 daughter card (only required for upgrades as included in A Kč * standard UCC1 kit) MCU1 docking port A Kč * SPA1 servo power amplifier for UCC1 kits and accessories SPA1 kit A Kč * SPA1 service pack including a set of mating connectors, backshells & tuning aids A Kč * Accessories and cables 3U mounting kit - suitable for rack mounting UCC1 or SPA1 A Kč * Optical cable P-PP Kč * Training UCC1 retrofitters training course, first person, 3 days at Renishaw UK G Kč * UCC1 retrofitters training course, each additional delegate, 3 days at Renishaw UK G Kč * * Please note that parts marked with * are none discountable.

17 ACR1 autochange rack 8 port motorised probe and extension bars autochange rack. Recommended for use when vertical mounting or changing probes from the end of extension bars is required. ACR1 autochange rack kits ACR1 8 port autochange rack kit A Kč ACC2-2 autochange controller for ACR1 ACC2-2 autochange rack controller (RS232 only) A Kč ACR1 accessories and cables ACR1 MK (H) horizontal mounting kit A Kč ACR1 MK (V) vertical mounting kit (to mount the ACR1 vertically both A Kč mounting kits need to be ordered.) ACR1 adjustable rack base A Kč ACR1 additional 100mm leg M Kč ACR1 additional 200mm leg M Kč ACR1 long port replacement kit A Kč ACR1 short port replacement kit A Kč ACR1 mixed port replacement kit A Kč PL19 5 m IDC plug - IDC socket ACR1 to ACC2-2 plain rack cable A Kč PL20 10 m IDC Plug - IDC socket ACR1 to ACC2-2 plain rack cable A Kč Change/storage racks for autojointed probes/extensions 10-1 PL21 15 m IDC Plug - IDC socket ACR1 to ACC2-2 plain rack cable A Kč PL40 30 m IDC Plug - IDC socket ACR1 to ACC2-2 plain rack cable A Kč ACR3 autochange rack 4 port passive probe and extension bars autochange rack. Requires an MRS kit for mounting on to a CMM (for full details see below). If 8 ports are required, 2 ACR3s can be mounted on one MRS rail. ACR3 autochange rack kits ACR3 4 port autochange rack kit A Kč MAPS manual autojoint probe stand Stores up to 6 autojointed probes or extension bars MAPS manual autojoint probe stand MAPS manual Autojoint probe stand kit A Kč

18 Extension bars 11-1 Extension bars - autojoint type Autojoint to M8 and autojoint to autojoint probe extension bars for increased reach and accessibility. PAA series - Autojoint to M8 extension bars PAA1-30 mm steel extension bar A Kč PAA2-140 mm lightweight alumunium extension bar A Kč PAA3-300 mm lightweight extension bar A Kč PAACF series - ultra lightweight Autojoint to M8 extension bars Please note that these products are special order only. Please call customer service for details PACF2-140 mm ultra lightweight extension bar A ** PACF3-300 mm ultra lightweight extension bar A ** PAACF mm ultra lightweight extension bar A ** PAACF mm ultra lightweight extension bar A ** PEM series - aluminium Autojoint to Autojoint extension bars PEM kit including 1 x PEM1, 1 x PEM2 and 1 x PEM3 A Kč PEM25-25 mm extension bar A Kč PEM1-50 mm extension bar A Kč PEM2-100 mm extension bar A Kč PEM3-200 mm extension bar A Kč PEM4-90º autojoint extension bar A ** PEMCF series - ultra lightweight Autojoint to Autojoint extension bars Please note that these products are special order only. Please call customer service for details PEMCF1-50 mm ultra lightweight extension bar A ** PEMCF2-100 mm ultra lightweight extension bar A ** PEMCF3-200 mm ultra lightweight extension bar A ** Extension bars - M8 to M8 type M8 to M8 probe extension bars for increased reach and accessibility. PEL series - Aluminium M8 to M8 extension bars PEL kit - extension bars kit including 1 x PEL1, 1 x PEL2 and 1 x A Kč PEL3 PEL1 - '50 mm lightweight extension bar A Kč PEL2-100 mm lightweight extension bar A Kč PEL3-200 mm lightweight extension bar A Kč PEL4-300 mm lightweight extension bar A Kč PECF series - ultra lightweight carbon fibre extension bars Please note that these products are special order only. Please call customer service for details PECF1-50 mm ultra lightweight extension bar A ** PECF2-100 mm ultra lightweight extension bar A ** PECF3-200 mm ultra lightweight extension bar A ** Extension bars accessories Accessories for use with probe extension bars Extension bars accessories PK1 - M8 to M8 knuckle joints A Kč ** Please note that this product is special order only. Please call customer service for details

19 MRS modular rack system Modular rack system for use with ACR3, FCR25, SCP600 and SCP80 MRS kits MRS kit (400mm) including 1 x 400 mm rail, 2 x mountings, 4 x 125 mm legs, 2 x step back adaptors and 2 mounting adaptors MRS kit (600mm) including 1 x 600 mm rail, 2 x mountings, 4 x 125 mm legs, 2 x step back adaptors and 2 mounting adaptors MRS kit (1000mm) including 1 x 1000 mm rail, 2 x mountings, 4 x 125 mm legs, 2 x step back adaptors and 2 mounting adaptors PART NO. A A A PRICE (Kč) Kč Kč Kč MRS accessories MRS rail mm A Kč MRS rail mm A Kč MRS rail mm A Kč MRS leg mm long A Kč MRS leg mm long A Kč MRS 60 mm Ø x 350 mm long extension leg (for use with SP80) A Kč MRS leg foot adaptor A Kč MRS fixed foot A Kč MRS step back adaptor A Kč MRS M8 T nut (non-discountable part) P-NU Kč Accessories 12-1 UDS universal datum sphere Datum ball kits for probe and stylus qualification. Datum ball kits Datum sphere kits including Datum ball kit - 12 mm dia A Kč Datum ball kit - 19 mm dia A Kč Datum ball kit - 25 mm dia A Kč Datum ball kit - 3/4" dia A Kč Datum ball kit - 1" dia A Kč Datum ball accessories Datum ball fixing studs - M6 x 1 M Kč Datum ball fixing studs - M8 x 1.25 M Kč Datum ball fixing studs - M10 x 1.5 M Kč Datum ball fixing studs - 5/16" x UNC M Kč Datum ball fixing studs - 3/8" x UNC M Kč Datum balls - 12mm dia Datum Ball A Kč Datum balls - 19mm dia Datum Ball A Kč Datum balls - 25mm dia Datum Ball A Kč Datum balls - 3/4" dia Datum Ball A Kč Datum balls - 1" dia Datum Ball A Kč Datum ball 2 way adaptor M Kč Datum ball 3 way adaptor M Kč Datum ball pillar extension 75mm long M Kč Gram gauge please note that this product is not subject to P-GA Kč * discount. Machine checking gauge kits for quickly verifying CMM squareness and datum ball kits.

20 MCG machine checking guage Machine checking guage for fast verification of CMM squareness. Machine checking gauge kits MCG1- small CMM checking gauge kit for CMMs up to 1m cubed A Kč MCG2 - comprehensive CMM checking gauge kit for all CMMs A Kč Accessories 12-2 Machine checking gauge accessories SA3 - M12 location piece for (for mounting gauge to CMM table with M Kč M12 thread inserts) SE2-100 mm long leg M Kč Cables Cables for CMM probe sensors, probe heads, CMM controllers, autochange racks etc. Manual probe head cables PL1 (T) m long 5 pin DIN coiled cable A Kč PL2 (T) m long 5 pin DIN coiled cable A Kč PL3 (T) m long 5 pin DIN coiled cable A Kč PL4 (T) m long 5 pin DIN plain cable A Kč PL m long 7 pin AMPHENOL coiled cable A Kč PL17 - (T) m long 14 pin LEMO coiled cable A Kč PL18 - (T) m long 14 pin LEMO coiled cable A Kč PL27 - (T) m long 5 pin MOLD - 5 pin MOLD coiled cable A Kč PL27 (T) m long 5 pin MOLD - 5 pin MOLD coiled cable A Kč Motorised probe head cables PL5 (U) m, 90ø touchel - LEMO coiled cable A Kč PL6 (U) m, 90ø touchel - LEMO coiled cable A Kč PL12 (U) m, 90ø touchel - LEMO plain cable A Kč PL13 (U) m, 90ø touchel - LEMO coiled cable A Kč PL33 (U) m, 90ø touchel - LEMO plain cable A Kč PL93 (U) m, 90ø in line touchel plain cable (PH10MQ to LPM6 / 7 / 8 / 9T) A Kč Machine cables PLM6U - 6 m PH10 to PHC10 colied cable (chasis) A Kč PLM7U - 4 m PH10 to PHC10 colied cable (chasis) A Kč PLM8U - 6 m PH10 to PHC10 colied cable (socket) A Kč PLM9U - 4 m PH10 to PHC10 colied cable (socket) A Kč Output cables PL7-3 m 5 pin DIN to 5 pin DIN plain cable A Kč PL15-3 m 5 pin DIN to interface to CMM plain cable A Kč PL26 (T) m PI200 to PHC9 (7 pin) plain cable A Kč PL m 7 pin DIN to 7 pin DIN plain cable A Kč Mutiwired cables PL38V - 25 m multiwired plain cable A Kč PL42V - 15 m multiwired plain cable A Kč PL44V - 8 m multiwired plain cable A Kč PL45V m multiwired plain cable A Kč PL46V m multiwired plain cable A Kč PL56V - 12 m multiwired plain cable A Kč PL75V - 1 m PI7 to IS1 multiwire extension cable A Kč

21 Cables (continued) Adaptor / extension cables PL9-0.6 m machine cable to probe interface plain cable A Kč PL m machine cable to probe / probe head 5 pin plain A Kč cable PL m probe head cable to probe / probe head 7 pin A Kč Amphenol plain cable PL23 (T) m PI4-2, PI200 plain adaptor cable (machine cable to A Kč PHC9 extension cable PL82V to video interface) PL69-10 m multiwired probe extension cable A Kč PL97 (S) m dual adaptor cable for connecting 2 x SCR200 racks to PI200 (requires 2 x cables PL63/64/65 in addition) A Kč PICS Interconnection cables PL24 5 m PI200 or PI7-2 to CM cable A Kč PL25 (T) 0.3 m PI200 to PI7-2 to PHC10-2 / ACC2-2 cable A Kč PL70 (V) 0.5 m PI200 and PI7-2 interfaces cable A Kč PL72 2 m PI200 or PI7-2 to PHC10-2 / ACC2-2 cable A Kč PL76 (S) 0.7 m T cable A Kč Accessories 12-3 Rack cables PL19 5 m IDC plug - IDC socket ACR1 to ACC2-2 plain rack cable A Kč PL20 10 m IDC Plug - IDC socket ACR1 to ACC2-2 plain rack cable A Kč PL21 15 m IDC Plug - IDC socket ACR1 to ACC2-2 plain rack cable A Kč PL40 30 m IDC Plug - IDC socket ACR1 to ACC2-2 plain rack cable A Kč SCR200 cables PL63 5 m SCR200 to PI200 cable A Kč PL64 10 m SCR200 to PI200 cable A Kč PL65 20 m SCR200 to PI200 cable A Kč Probe cables PL28 (T) m coiled probe cable A Kč PL m coiled probe cable A Kč PL m coiled probe cable A Kč PL82 5 m SP600 multiwired probe cable (SP600 to AC1 or AC2 cards - not compatible with PH10M) A Kč

22 Accessories 12-4 Tools Tools for CMM probe sensors, probe heads, CMM controllers, autochange racks etc. Tools TK4 - TP1 tool kit including 1 x S3, 1 x S6 and 2 x S7 A Kč TK5 - TP2/TP6 tool kit including 1 x S1, 1 x S3, 2 x S7, 1 x S8 and 1 A Kč x S9 TK6 - probe head tool kit including 1 x S4, 1 x S5 and 1 x S6 A Kč TK7 - TP6A tool kit including 1 x S3, 2 x S7, 1 x S10 and brush A Kč S1 - C" Spanner, 13.0 A Kč S3 - hexagonal wrench, 1.5mm A/F P-TL Kč S4 - hexagonal wrench, 3.0mm A/F P-TL Kč S5 - hexagonal wrench, 2.0mm A/F P-TL Kč S6 - hexagonal wrench, 2.5mm A/F P-TL Kč S7 - M2 and M3 stylus tool M Kč M4 stylus tool M Kč S8 - TP2-6W spanner M Kč S9 double ended 'C' spanner - please note that this product is not A Kč subject to discount. S10 - Autojoint key A Kč S12 - hexagonal wrench, 0.9mm A/F P-TL Kč S20 - GF stylus torque tool A Kč CK200 - TP20/TP200 probe cleaning kit A Kč Boxes Boxes for CMM probe sensors, probe heads and extension bars Boxes TP1(S) basic probe box A Kč TP1(S) probe and basic styli box A Kč TP2 probe, PH1 head, probe extensions and basic styli box A Kč TP2 probe, PH6 head, probe extensions and basic styli box A Kč TP2 probe and basic styli box A Kč TP2 probe, basic styli and probe extensions box A Kč Comprehensive styli box A Kč TP6 probe and basic styli box A Kč TP6 probe, basic styli and probe extensions box A Kč TP200 probe and styli kit box A Kč PE extensions and PK1 box A Kč PEL extensions box A Kč PH6, TP2, stylus and TK6 box A Kč PH5 or PH5/1 & cable and TK6 box A Kč PH10 head kit box A Kč MIH kit box A Kč PH1 probe head, cable and TK6 box A Kč

23 Motorised probe head upgrades REVITALISE your motorised heads! Upgrade your PH9, PH9A or PH50 motorised head to a new PH10T or PH10M to get extra measurement flexibility PART NO. PH9 / 9A upgrade offers PH10 upgrade kit 1 including PH10T motorised probe head, tool kit A and mahogany box PH10 upgrade kit 2 including PH10M motorised probe head, tool kit A and mahogany box PH10 upgrade kit 3 including PH10T motorised probe head, PHC10- A IEEE probe head interface, tool kit and mahogany box PH10 upgrade kit 4 including PH10T motorised probe head, PHC10- A RS232 probe head interface, tool kit and mahogany box PH10 upgrade kit 5 including PH10T motorised probe head, PHC10- A IEEE probe head interface, HCU1 hand control unit, tool kit and mahogany box PH10 upgrade kit 6 including PH10T motorised probe head, PHC10- A RS232 probe head interface, HCU1 hand control unit, tool kit and mahogany box PH10 upgrade kit 7 including PH10M motorised probe head, PHC10- A IEEE probe head interface, tool kit and mahogany box PH10 upgrade kit 8 including PH10M motorised probe head, PHC10- A RS232 probe head interface, tool kit and mahogany box PH10 upgrade kit 9 including PH10M motorised probe head, PHC10- A IEEE probe head interface, HCU1 hand control unit, tool kit and mahogany box PH10 upgrade kit 10 including PH10M motorised probe head, PHC10- A RS232 probe head interface, HCU1 hand control unit, tool kit and mahogany box PH10 upgrade kit 11 including PH10MQ motorised probe head, tool A kit and mahogany box PH10 upgrade kit 12 including PH10MQ motorised probe head, A PHC10-2 RS232 probe head interface, tool kit and mahogany box PH10 upgrade kit 13 including PH10MQ motorised probe head, A PHC10-2 RS232 probe head interface, HCU1 hand control unit, tool kit and mahogany box PH50 upgrade offers PH10 upgrade kit 14 including PH10T motorised probe head, PHC10-2 RS232 probe head interface, PI4-2 probe sensor interface, TP20 probe sensor kit 1 and 2 x M2 styli A PRICE (Kč) Upgrade offers 13-1

24 Upgrade offers 13-2 Manual probe head upgrades REVITALISE your manual heads! Upgrade your MH8, MIP, PH1 and PH6 heads to a new MH20 or MH20I, featuring module changing, taking advantage of Renishaw s special pricing. Upgrade your old manual head to a MH20 Upgrading from PH1 and TP2 to an MH20 with 2 x TP20 modules A *** Upgrading from PH1 (only) to an MH20 with 2 x TP20 modules A *** Upgrading from PH6 and TP2 to an MH20 with 2 x TP20 modules A *** Upgrading from PH6 (only) to an MH20 with 2 x TP20 modules A *** Upgrade your old manual head to a MH20i Upgrading from PH1 and TP2 to an MH20i with 2 x TP20 modules A *** Upgrading from PH1 (only) to an MH20i with 2 x TP20 modules A *** Upgrading from PH6 and TP2 to an MH20i with 2 x TP20 modules A *** Upgrading from PH6 (only) to an MH20i with 2 x TP20 modules A *** Upgrading from MIP to an MH20i with 2 x TP20 modules A *** Upgrading from MH8 and TP2 to an MH20i with 2 x TP20 modules: A *** Upgrading from MH8 (only) to an MH20i with 2 x TP20 modules A *** Upgrading from TP1 to an MH20i with 2 x TP20 modules A *** Please note - All manual head upgrades require 2 part numbers with the order Firstly choose the MH20 or MH20i kit using the part nos. listed above and Appendix A for MH20i or Appendix C for MH20 upgrades Secondly choose the part no. for the additional TP20 module from those listed below: A standard force module A medium force module A extended force module Touch trigger probe upgrades REVITALISE your touch trigger probes! Upgrade your TP1, TP2-5W, TP2-6W or TP6 to a new TP20 and gain the ability to do fast automatic stylus changing. Upgrade your old touch probe to a TP20 TP20 probe kit including 2 x standard force modules A TP20 probe kit including 1 x standard force & 1 x medium force A module TP20 probe kit including 1 x standard force & 1 x extended force A module TP20 probe kit including 2 x medium force modules A TP20 probe kit including 1 x medium force & 1 x extended force A module TP20 probe kit including 2 x extended force modules A

25 Appendix A - completed part no.s for listed head / shank / cable Part numbers for listed head / cable / shank assemblies. If required Head/Shank combination is not shown please refer to your local supplier Appendices 14-1

26 Appendix B - completed part no.s for PH6 head / shank / cable Part numbers for PH6 head / cable / shank assemblies Appendices 14-2 Appendix C - completed part no.s for MH20 head / shank / cable Part numbers for MH20 head / cable / shank assemblies

27 Appendix D - list of shanks per CMM type Shanks for connecting shank mounted probe sensors and probe heads to CMM quills Shanks for all shank mounted probes and probe heads except PH6 MS1 shank for Brown and Sharpe, Bridgeport, Elm systems, Fanamation, Giddings and Lewis, ITP, Poli, Portage Machine, Tesa and Zettmess CMMs MS1(S) shank for Carl Zeiss (new specification) CMMs MS2 shank for Boice, Carl Zeiss (old specification), Federal Products, Helmel, Kemco, metrologi, MFO, Mora, Numerex, Real Meca, Starrett, Tokyo Boeki, Tri-mesures, Tokyo Seimitsu, and Wenzel CMMs MS3 shank for Eley, Ferranti, new LK Tool (meter 4), Tarus and WandA CMMs MS4 shank for new LK Tool (micro) CMMs MS5 shank for Ferranti CMMs MS6 shank for C E Johannson (old specification) CMMs MS7 shank for Renault (Siev) and Tri-Mesures CMMs MS7(S) shank for Starrett (new specification) CMMs MS8 shank for Olivetti CMMs MS9 shank for Mitutoyo Corporation (UK) CMMs MS10 shank for Mitutoyo Corporation (old specification) CMMs MS11 shank for Crown and Windley CMMs MS12 shank for Mitutoyo Corporation (new specification) CMMs MS13 shank for DEA Corporation CMMs (including special version with in-shank connector for MIH-D) MS14 shank for CTA and Real Meca CMMs MS15 shank for C E Johannson (new specification) CMMs MS17 shank for Steifelmeyer CMMs Shanks for PH6 and MH20 MS1/T shank for Brown and Sharpe, Bridgeport, Elm systems, Fanamation, Giddings and Lewis, Poli and Portage Machine CMMs MS2/T shank for Federal Products, Helmel, Kemco, Mora, Numerex, Starrett, Tokyo Boeki and Wenzel CMMs MS3/T shank for Eley, Ferranti, new LK Tool (meter 4), Tarus and W and A CMMs MS4/T shank for new LK Tool (micro) CMMs MS5/T shank for Ferranti CMMs MS6/T shank for C E Johannson CMMs MS7/T shank for Renault CMMs MS8/T shank for Olivetti CMMs MS9/T shank for Mitutoyo Corporation (UK) CMMs MS11/T shank for Crown and Windley CMMs MS18/T shank for Mora CMMs PART NO. M A M M M M M M M M M M M M M M M A M M M M M M M M M M M Appendices 14-3

28 Appendix E - Quick reference price list - aphabetically listed PART NO. PRICE (Kč) Appendices 14-4 AC2 interface card for use with SP600M and SP600Q A Kč AC3 ISA interface card for use with SP25M A Kč ACC2-2 autochange rack controller (RS232 only) A Kč ACR1 8 port autochange rack kit A Kč ACR1 additional 100mm leg M Kč ACR1 additional 200mm leg M Kč ACR1 adjustable rack base A Kč ACR1 long port replacement kit A Kč ACR1 mixed port replacement kit A Kč ACR1 MK (H) horizontal mounting kit A Kč ACR1 MK (V) vertical mounting kit (to mount the ACR1 vertically both A Kč mounting kits need to be ordered.) ACR1 short port replacement kit A Kč ACR2 6 port rack including 3 x ACR2 port pair for use with PHS1 A Kč ACR2 port pair for use with PHS1 A Kč ACR3 4 port autochange rack kit A Kč AM1 adjustment module for PH10M, PH10T, PH6M and MIH A Kč AM2 adjustment module for PH10MQ A Kč CC6 counter card for SP80 A Kč CK200 - TP20/TP200 probe cleaning kit A Kč Datum ball 2 way adaptor M Kč Datum ball 3 way adaptor M Kč Datum ball fixing studs - 3/8" x UNC M Kč Datum ball fixing studs - 5/16" x UNC M Kč Datum ball fixing studs - M10 x 1.5 M Kč Datum ball fixing studs - M6 x 1 M Kč Datum ball fixing studs - M8 x 1.25 M Kč Datum ball kit - 1" dia A Kč Datum ball kit - 12 mm dia A Kč Datum ball kit - 19 mm dia A Kč Datum ball kit - 25 mm dia A Kč Datum ball kit - 3/4" dia A Kč Datum ball pillar extension 75mm long M Kč Datum balls - 1" dia Datum Ball A Kč Datum balls - 12mm dia Datum Ball A Kč Datum balls - 19mm dia Datum Ball A Kč Datum balls - 25mm dia Datum Ball A Kč Datum balls - 3/4" dia Datum Ball A Kč EM1 & EM2 standard force module kit A Kč EM1 standard force module (71 mm long) A Kč EM2 standard force module (96 mm long) A Kč FCR25-3 port standalone change rack unit includes 1 x FCR25 with A Kč integral leg for table mount, 3 x PA25-SH and 3 x PA25-20 FCR25-6 port standalone change rack unit includes 2 x FCR25 with A Kč integral leg for table mount, 3 x PA25-SH and 3 x PA25-20 FCR25 flexible change rack unit (triple-port units for MRS system) A Kč includes 1 x FCR25, 3 x PA25-SH and 3 x PA25-20 FCR25 port adaptor insert kit includes 3 x PA25-SH and 3 x PA25-20 A Kč HA-8 M8 adaptor arm for use with PHS1 A Kč HA-M multiwire adaptor arm for use with PHS1 A Kč HCU1 hand control unit A Kč HE330, 330 mm PHS1 extended arm A Kč HE500, 500 mm PHS1 extended arm A Kč

29 Appendix E - Quick reference price list - aphabetically listed (cont) PART NO. PRICE (Kč) HE750, 750 mm PHS1 extended arm A Kč IS1-2 probe interface selector A Kč ISA optical card (only required for upgrades or spares as it is A Kč * included in the UCC1 kits) IU80 interpolator unit for SP80 A Kč KM1 - through quill cabling kinematic kit for use with PHS1 A Kč KM2 - around quill cabling kinematic kit for use with PHS1 A Kč KM mm to 80 mm quill adaptor for SP80 A Kč KM80 standard kinematic mount for SP80 A Kč MAPS manual Autojoint probe stand kit A Kč MCG1- small CMM checking gauge kit for CMMs up to 1m cubed A Kč MCG2 - comprehensive CMM checking gauge kit for all CMMs A Kč MCR20 rack for automatic stylus changing with TP20 (includes 1 x A Kč extended force & 1 x medium force modules) MCR20 rack for automatic stylus changing with TP20 (includes 1 x A Kč medium force & 1 x low force modules) MCR20 rack for automatic stylus changing with TP20 (includes 1 x A Kč standard force & 1 x low force modules) MCR20 rack for automatic stylus changing with TP20 (includes 1 x A Kč standard force & 1 x medium force modules) MCR20 rack for automatic stylus changing with TP20 (includes 2 x A Kč extended force modules) MCR20 rack for automatic stylus changing with TP20 (includes 2 x A Kč medium force modules) MCR20 rack for automatic stylus changing with TP20 (includes 2 x A Kč standard force modules) MCR20 rack for automatic stylus changing with TP20 (rack only) A Kč MCU1 daughter card (only required for upgrades as included in A Kč * standard UCC1 kit) MCU1 docking port A Kč * MCU1 joystick kit A Kč * MH20 including extended force probe module (see Appendix C for A ** Kč MH20 including low force probe module (see Appendix C for A ** Kč MH20 including medium force probe module (see Appendix C for A ** Kč MH20 including standard force probe module (see Appendix C for A ** Kč MH20i including extended force probe module (see Appendix A for A ** Kč MH20i including low force probe module (see Appendix A for A ** Kč MH20i including medium force probe module (see Appendix A for A ** Kč MH20i including standard force probe module (see Appendix A for A ** Kč MH8 probe head kit, includes required shank (see Appendix A for A-1332-**** Kč MH8 probe head only A Kč Appendices 14-5 * Please note that parts marked with * are none discountable.