Migration User Guides: The Console Application Setup Guide

Transcription

1 Migration User Guides: The Console Application Setup Guide Version 1.0 1

2 Contents Introduction 3 What are my software settings? 3 Popular software setup tutorials 3 Apple Mail OS Maverick and Yosemite 4 Outlook Outlook Outlook How to set up on your device 24 iphone/ ipad 24 Microsoft Surface 37 Android Phone 38 BlackBerry 42 Thunderbird 43 Entourage

3 Introduction Before you can configure software to send and receive s from our servers, you must: 1. Purchase a cpanel or Cloud hosting subscription service. 2. Create an account on our cpanel or Cloud hosting servers. 3. Once you have done this, you may configure your software to connect to the account you created on our servers. What are my software settings? All software and devices including Microsoft Outlook, Apple Mail and Mozilla Thunderbird connect to our servers using the exact same settings. This document is for users who are familiar with how to use their software, and simply want to know what settings they should use to connect to our servers. If you are unsure how to use your software, we recommend reading through our setup tutorials section further down. Setting More information Example Username Where asked for the username, users must johnsmith@example.com enter their complete address Password Where asked for their password, users must ******** enter the password they selected when creating the account on our servers. Incoming Mail Server POP: pop.partnerconsole.net IMAP: imap. partnerconsole.net cpanel Servers: Your cpanel server Incoming Server Port Outgoing Mail Server Outgoing Server Port Authentication Type Our servers use all the default incoming server port numbers. Most Internet Service Providers (ISP) block port 25 for their own outgoing s. We recommend using port 587 or if connecting via SSL, 465 Users must use password authentication to send or receive s from our servers. Popular software setup tutorials Phone: Fax: getonline@domainz.net.nz name eg. cp212.ezyreg.com POP: Non SSL= 110 SSL = 995 IMAP: Non SSL= 143 SSL = 993 SMTP: smtp. partnerconsole.net cpanel Servers: Your cpanel server name eg. cp212.ezyreg.com Non SSL = 587 SSL = 465 Password Note: As a courtesy to our customers, we provide online tutorials on how to configure various types of software. Our staff, however, are not able to provide support on how to use third-party 3

4 software. For assistance in how to use software not sold or developed by us, please contact the software manufacturer or visit their relevant online support pages. Setup account using Apple Mail OS Maverick and Yosemite 1. Click Mail on the menu bar 2. Select Add Account 3. Select the radio button next to 'Add Other Mail Account' and click continue. 2. Next, you'll be asked to fill in your credentials. 4

5 3. Complete the following information: Full Name: The name displayed to the recipient Address: The account you wish to connect to Password: account password Note: The address will not automatically configure itself. 7. Click Next Next, you ll be asked to enter your incoming mail server details. 9. Complete the following information using the table at the top of the page: Account Type: POP/IMAP Mail server: pop, imap or cpanel address User Name Password 10. Click Next. You may get another warning message about Apple Mail not being able to verify the identity of the server you are attempting to connect to. Simply click [Connect] to continue 5

6 11. You will now be asked to provide additional information about the incoming mail server: 12. Fill out the following information: 13. Path Prefix: Option Field you may leave blank Port: Your incoming mail server port number, non SSL, 110 for POP or 143 for IMAP, SSL 995 for POP or 993 for IMAP. Select the Use SSL tick box if you are using an SSL port. Authentication: Password 6

7 14. Click Next. You will be asked to enter in your outgoing mail server details. 15. Complete the following information from the table at the top of the article: SMTP server: smtp.partnerconsole.net or cpanel address User Name Password 16. Click Create. 17. You will now be asked to provide additional information about the incoming mail server. 18. Complete the following information: Port: Non SSL enter 587, SSL enter 465. Select the Use SSL tick box if you are using an SSL port. Authentication: Password 7

8 19. Click Create 20. Close the Mail application and re-open it. 21. Click on Mail and then select Preferences 22. Select Accounts and then click on the account you want to edit, then click 'Advanced' 23. In the pop up window, uncheck 'Automatically detect and maintain account settings' 24. Click on Account Information 25. Click on the Outgoing Mail Server(SMTP) server list and select 'Edit SMTP Server List' 26. Click on the SMTP server you are using for this account 27. Click on 'Advanced' and uncheck 'Automatically detect and maintain Account Settings' 21. Click OK and close the accounts window Your is now set up. We recommend testing it by sending yourself an . 8

9 How do I set up my on Outlook 2013? Setup an account in Outlook 2013 website tutorial 1. Open Microsoft Outlook Click File 3. Click Info from the left side menu 4. Click Account Settings 5. Select the Account Settings...option from the drop down 9

10 6.Under the tab, click New Note: If you're making changes to an existing account, you will see a list of accounts that exist within Outlook 2013 under the tab. Double click on the account you wish to make changes to, then skip to step 9 7. Select the Manually configure server settings or additional server types radio option, then click [Next] 10

11 8. Select the POP or IMAP option and click [Next] 9. Complete the empty fields using the : Your Name: The name displayed when people receive your s Address: The address you are sending from Account Type: Select POP3 or IMAP from the drop down Incoming mail server: pop, imap or cpanel address Outgoing mail server: smtp or cpanel address. Alternatively, you can enter your Internet Service Provider s (ISP) outgoing mail server User Name: Your full address. eg. johnsmith@example.com Password: The password used for this account. It is up to the end user to decide if they want to create a new Outlook Data File or not. This choice does not affect the connection to our servers 11

12 10. Click [More Settings] 11. Select the Outgoing Server tab 12. Select My outgoing mail server (SMTP) requires authentication and Use same settings as incoming mail server 13. Select the Advanced tab. Users can choose whether to use SSL or not, both are supported on our servers Without SSL Encryption This server requires an encrypted connection (SSL) = Unselected Change the Outgoing server (SMTP) number to 587 Use the following type of encrypted connection = None With SSL Encryption 12

13 This server requires an encrypted connection (SSL) = Selected Change the Outgoing server (SMTP) number to 465 Use the following type of encrypted connection = SSL Note: Enabling SSL on shared services can cause warnings to appear in your software. 14. Click [OK] 15. Click [Next] then [Finish] This completes the setup of your account in Outlook

14 How to set up your in Outlook Open Microsoft Outlook Click File 3. Select Info from the drop down menu 4. Click Account Settings 5. Select the Add and remove accounts option from the drop down. 6. Under the tab, click New. Modifying the settings for an existing account? If you are making changes to an existing account, you will see a list of accounts that exist within Outlook 2010 under the tab. Double click on the account you wish to make changes to, then skip to step 9. 14

15 7. Select Account radio option and complete the following information: Your Name: The name displayed when people receive your s Address: The address you are sending from Password: The password used for this account Re-type Password: The password used for this account Select Manually configure server settings or additional server types then click [Next]. 8. Select the Internet radio option and click [Next]. 9. Complete the Settings information from the table at the top of the article: Your Name: The name you wish displayed when people receive your s Address: The address you are sending from Account Type: Select POP3 or IMAP from the drop down Incoming mail server: pop, imap or cpanel address Outgoing mail server: smtp or cpanel address User Name: Your full address. eg. Password: The password used for this account. 15

16 It is up to the end user to decide if they wish to create a new Outlook Data File or not. This choice does not affect the connection to our servers. 10. Click [More Settings]. 11. Select the Outgoing Server tab. 12. Select My outgoing mail sever (SMTP) requires authentication and Use same settings as incoming mail server. 13. Select the Advanced tab. Users can choose whether to use SSL or not. Both are supported on our servers. 16

17 Without SSL Encryption This server requires an encrypted connection (SSL) = Unselected. Change the Outgoing server (SMTP) number to 587. Use the following type of encrypted connection = None. With SSL Encryption This server requires an encrypted connection (SSL) = Selected Change the Outgoing server (SMTP) number to 465 Use the following type of encrypted connection = SSL 14. Click [OK]. 15. Click [Next] then [Finish]. This completes the setup of your account in Outlook

18 How do I set up my on Outlook 2007? 1. Open Microsoft Outlook Click File 3. Select Info from the drop down menu 4. Click Account Settings. 5. Select the Add and remove accounts option from the drop down 6. Under the tab, click New. Modifying the settings for an existing account? If you're making changes to an existing account, you will see a list of existing accounts within Outlook 2007 under the tab. Double click on the account you wish to make changes to, then skip to step 9. 18

19 7. Complete the following information: Your Name: The name displayed when people receive your s Address: The address you are sending from. Password: The password used for this account. Re-type Password: The password used for this account. 19

20 8. Select Manually configure server settings or additional server types then click [Next]. 9. Select the Internet radio option and click [Next]. 10. Complete the Settings information using the table at the top of the article: Your Name: The name you wish displayed when people receive your s Address: The address you are sending from. Account Type: Select POP3 or IMAP from the drop down. Incoming mail server: pop, imap or cpanel address. Outgoing mail server: smtp or cpanel address User Name: Your full address. eg. Password: The password used for this account. It is up to the end user to decide if they wish to create a new Outlook Data File or not. This choice does not affect the connection to our servers. 20

21 11. Click [More Settings] 12. Select the Outgoing Server tab. 13. Select My outgoing mail server (SMTP) requires authentication and Use same settings as incoming mail server 21

22 14. 22

23 15. Select the Advanced tab. Users can choose whether to use SSL or not - both are supported on our servers. Without SSL Encryption This server requires an encrypted connection (SSL) = Unselected. Change the Outgoing server (SMTP) number to 587. Use the following type of encrypted connection = None. With SSL Encryption This server requires an encrypted connection (SSL) = Selected. Change the Outgoing server (SMTP) number to 465. Use the following type of encrypted connection = SSL. 16. Click [OK]. 17. Click [Next] then [Finish]. This completes the setup of your account in Outlook

24 How do I set up my on my iphone/ipad? 1. From the home screen of your iphone/ipad, press the Settings Icon 2. Select Mail, Contacts, Calendars 24

25 3. Under the Accounts section, select Add Account 4. On the Add Account page, select Other 25

26 5. Under the Mail section, select Add Mail Account 6. On the New Account screen, complete the following details: Your Name: The name to be displayed when sending Address: Your address, e.g. Password: The password used for this account Description: Any text description 26

27 27

28 7. Press [Save] The device may attempt to automatically retrieve the server settings. If it fails, continue following the steps below to configure your iphone/ipad manually 8. Our servers support both POP and IMAP. Select IMAP or POP from the mail account types, depending on your preference 9. Scroll down the screen and complete the corresponding information using the table at the top of the page:. Incoming Mail Server Host Name: pop, imap or cpanel address. Username: Your full address, eg. Password: The password to your address 28

29 Outgoing Mail Server Host Name: smtp or cpanel address. Username: Your full address, eg. Password: The password to your address. 29

30 10. Scroll back to the top of the screen and press [Save]. Your device will now attempt to verify all the settings you ve entered. You ll need to wait for it to do this. Note: You may be given a warning that your device cannot connect via SSL, or that it cannot be verified If this warning comes up, you may simply press continue. 11. This completes the configuration of your iphone/ipad to our servers. Before using it however, we recommend testing that a few other settings have been configured correctly. The iphone/ipad is known for automatically using some default settings, which may cause you problems. Continue with the steps below to ensure that the settings on your device are set correctly. 30

31 Modify the Settings on your iphone/ipad 1. From the home screen of your iphone/ipad, press the Settings Icon 2. Select Mail, Contacts, Calendars 3. The account you just created will be displayed in the Accounts section 4. Select the account you just created 31

32 5. Scroll down to the Outgoing Mail Server section and press SMTP 32

33 6. If only using your services with us on your device, your primary server should be smtp.partnerconsole.net or your cpanel server. Select this SMTP server to configure it further 33

34 7. Modify the following information if not already completed: SSL: Off. Authentication: Password. Server Port: 587. If wanting to use SSL, set SSL as on and the server port as

35 8. Press Done 9. To modify your incoming mail server settings, go back to the mail account page and press Advanced rather than SMTP 10. Modify the following information if not already completed: SSL: Off. Authentication: Password. Server Port: 110. If wanting to use SSL, set SSL as on and the server port as

36 On this screen, you may also allow your device to delete s from our servers when it downloads them, or set them to delete after a set period of time. The process is now complete. Test by sending an to the account. 36

37 How do I set up my on my Microsoft Surface? 1. Open Mail 2. Perform a left slide by putting your finger at the edge of the right hand side of the screen and sliding it to the left 3. Tap Settings 4. Tap Accounts 5. Tap Add an account 6. Tap Other account 7. Tap IMAP 8. Tap Connect 9. Tap Show more details 10. Fill in the following details using the table at the top of the page: Address/Username: The address you are sending from. Password: The password used for this account. Incoming (IMAP) server: imap or cpanel address. Set the port to 143. Incoming server requires SSL: Unselected Outgoing (SMTP) server: smtp or cpanel address. Set the port to 587. Outgoing server requires SSL: Unselected Outgoing sever requires authentication: Selected. Use the same username and password to send and receive mail: Selected 11. Tap Connect 37

38 How do I set up my on my Android phone? 1. From the home screen of your Android phone, press the icon (this might be on your home screen, but might also be lurking in your Apps folder) to open the app 2. On the Set up screen, complete the following details: Your address: In this example, we will use johnsmith@example.com.au, but you will need to enter your own address Your password: This is the password you have set for your account Click [Next] 38

39 Your device might attempt to automatically retrieve the server settings. If it fails, use the steps below to configure your Android device manually Our servers support both POP and IMAP. Select IMAP or POP from the mail account types, depending on your preference. For this tutorial we will be setting up a POP account, but the IMAP set up is very similar and will require the same information. 3. Click [POP3 Account] 4. Complete the following information using the table at the top of the page: Username: Your full address Password: Your password POP3 Server: pop or cpanel address 39

40 Click [Next] 5. On the Outgoing Server settings page, fill in the following information using the table at the top of the page: SMTP Server: smtp or cpanel address Username: Your address, in full Password: Your password Click [Next] 40

41 6. On the Account Options page, you can edit some of the basic options to suit your needs, including how often you want your s to download from the server and whether or not you want a notification each time you receive an On the last page of your Android set up, you can give your account a name and edit the name that appears on your outgoing messages. Click [Done] to be taken to your inbox. 41

42 How do I set up my on my Blackberry? 1. Log in to the BlackBerry's Internet Service by entering your User ID and password (specific to your BlackBerry) 2. Under Services, select Accounts. Note: BlackBerry 9900 and other Bold/Touch distribution users will be required to select Setup on the Home screen, then Accounts 3. Click Add An Account 4. Enter your complete address (username@yourdomain.com) in the Address field 5. Enter the password for this account into the Password field. You will then be asked to confirm your password 6. After entering this information, select Next 7. An error message will be sent to the BlackBerry informing you that the account was not automatically configured 8. Select Internet Service Provider which refers to POP/IMAP 9. Click Next 10. Select I will provide the settings to add this account 11. Click Next 12. Enter your account settings information. Please ensure the address box, which was automatically populated, is correct 13. In the Username field, enter your complete address, for example: username@yourdomain.com 14. In the Password field, enter the password for your account 15. In the Server field type: pop.partnerconsole.net or your cpanel server 16. Under Server Type select POP 17. Next to the option Use SSL, select No 18. Review your settings to ensure they are correct and click Next 19. Your account has now been successfully configured Note: Your BlackBerry's Internet Service should automatically check for new s in your inbox approximately every 15 minutes. Our servers do not support Push- or Push Extensions for IMAP. Standard IMAP and POP3 settings should be used. 42

43 How do I set up my on Thunderbird? 1. Open Thunderbird 2. Click Tools 3. Select Account Settings from the drop down menu 4. Click Account Actions 5. Select Add Mail Account 6. Type your name, address and address password into the fields provided 7. Click [Continue] 8. Thunderbird will automatically select the server host name, port number, SSL and Authentication settings for you. Some of these settings will need to be adjusted 9. Click [Manual Config] 10. Modify the incoming settings to: Incoming protocol: Select POP or IMAP from the drop down. POP is more common; however, you can easily chose IMAP if you prefer Incoming server hostname: pop.partnerconsole.net if using POP3 or imap. partnerconsole.net if using IMAP or your cpanel server Incoming port: 995 is using POP3, 993 if using IMAP Incoming SSL: SSL/TLS Incoming authentication: Normal password 11. Modify the outgoing settings to: Outgoing protocol: SMTP Outgoing server hostname: smtp.partnerconsole.net or your cpanel server Outgoing port: 465 Outgoing SSL: SSL/TLS Outgoing authentication: Normal password 12. Modify the username settings to: Username: johnsmith@example.com (ensure to place your full address including the domain name) 13. Click [Create Account] 14. Click [Confirm Security Exception]. 15. Thunderbird will verify that the setting are correct and complete the creation of your account This completes the setup of your account in Thunderbird. 43

44 How do I set up my on Entourage 2008? 1. Click Tool from the Entourage menu 2. Click Accounts 44

45 3. Click New 4. Select the Mail tab 45

46 5. In the address field, type your address and click Configure Account Manually 6. Select POP from the Account type dropdown list 7. Complete the following details: Account Name: The name displayed when people receive your s Include this account in my 'Send and Receive All Schedule': Should be selected Name: The name displayed when people receive your s Address: The address from which you are sending . Account ID: The full address Pop server: Also known as the Incoming mail server. Type pop.partnerconsole.net or you cpanel server Password: The password used for this account Smtp server: Also known as the Outgoing mail server. Type smtp.partnerconsole.net or your cpanel server 46

47 8. Click Click here for advanced sending options 9. Select the Override default SMTP port radio option then type 587 into the corresponding port field 10. Select the SMTP server requires authentication radio option 11. Select Use same settings as receiving mail server 12. Save all settings Congratulations, you have now correctly setup your account in Entourage Phone: Fax: getonline@domainz.net.nz 47