How To Check If A Dows And Simatic Can Be Compatible With A Step 7 (Dows) Or Step 7
|
|
|
- Vivien Hancock
- 3 years ago
- Views:
Transcription
1 Compatibility list of the dows operating systems and SIMATIC optional packages with versions of the STEP 7 basic package Legend: X = combination permitted - = combination not permitted (-) = combination not tested Notes: This list (possibly a more up to date version) is available on the Internet at: All statements regarding compatibility relate to the installation and combined running of the software on the same PC/programming device Statements regarding compatibility with a STEP 7 version also apply to the service packs for this version unless restrictions are explicitly stated. (Example: The statements regarding compatibility with STEP 7 V5.4 also apply to STEP 7 V5.4+,...) Statements regarding compatibility with an S7 optional package also apply to the service packs for this version unless restrictions are explicitly stated. (Example: The statements regarding compatibility with CFC V7.1 also apply to CFC V7.1+,...) The Microsoft dows operating systems are abbreviated in the table below as follows: Microsoft dows Professional Edition + Service Pack 4 XP Microsoft dows XP Professional Edition + Service Pack 1 or Service Pack 1a XP Microsoft dows XP Professional Edition + Service Pack 2 XP Microsoft dows XP Professional Edition + Service Pack 3 Microsoft dows Server Standard Edition as workstation Microsoft dows Server + Service Pack 1 Standard Edition with or without R2 as workstation Microsoft dows Server + Service Pack 2 Standard Edition with or without R2 as workstation Microsoft dows 32bit Ultimate or Business Microsoft dows 32bit + Service Pack 1 Ultimate or Business 7 Microsoft dows 7 32bit Ultimate or Professional 7 Microsoft dows 7 32bit + Service Pack 1 Ultimate or Professional 7 (64) Microsoft dows 7 64bit Ultimate or Professional 7 (64) Microsoft dows 7 64bit + Service Pack 1 Ultimate or Professional 2008 R2 (64) Microsoft dows Server 2008 R2 64bit Std. Edition 2008 R2 (64) Microsoft dows Server 2008 R2 64bit + Service Pack 1 Std. Edition A5E
2 05/ b Compatibility List STEP 7 Basic Packages XP XP XP Microsoft dows Operating Systems 7 7 STEP 7 V5.5 6ES CC10-0YA5 - - X X - - X - - X X X X X X STEP 7 V5.5 6ES CC10-0YA5 - - X X - - X (-) (-) X STEP 7 V5.4 SP5 6ES CC08-0YA5 - - X X - - X X X STEP 7 V5.4 6ES CC08-0YA5 - - X X - - X X X STEP 7 V ES CC08-0YA5 X - X X X STEP 7 V5.4 6ES CC08-0YA5 X - X X X STEP 7 V5.4 6ES CC08-0YA5 X X X - X X X STEP 7 V5.4 6ES CC08-0YA5 X X X - X X STEP 7 V5.4 6ES CC08-0YA5 X X X - X X STEP 7 Professional 2010 SR1 6ES CC11-0YA5 - - X X - - X - - X X X X X X STEP 7 Professional ES CC11-0YA5 - - X X - - X (-) (-) X STEP 7 Professional 2006 SR6 6ES CC10-0YA5 - - X X - - X X X STEP 7 Professional 2006 SR5 6ES CC10-0YA5 - - X X X X STEP 7 Professional 2006 SR4 6ES CC10-0YA5 X - X X X STEP 7 Professional 2006 SR3 6ES CC10-0YA5 X - X X X STEP 7 Professional 2006 SR2 6ES CC10-0YA5 X X X - X X STEP 7 Professional 2006 SR1 6ES CC10-0YA5 X X X - X X STEP 7 Professional ES CC10-0YA5 X X X - X X Note: SIMATIC M7 is released only for operation with dows or dows XP /2 7 (64) 7 (64) 2008 R2 (64) 2008 R2 (64) 2 A5E
3 Compatibility List 05/ b A&D Data Management (ADDM) STEP 7 V5.4 STEP 7 V5.5 A&D Data Management (Client) V6.1 6BQ AA30-3AC0 X X (-) X (-) - - (-) (-) - A&D Data Management (Client) V5.2 6BQ AA30-3AB0 X X - X (-) A&D Data Management (Agent) V1.2 6BQ AA00-0AC0 X X (-) (-) - - XP XP XP 7 Automation License Manager STEP 7 V5.4 STEP 7 V5.5 Automation License Manager V X X X X - - X X X Automation License Manager V X X X X X X X X X X Automation License Manager V X X X X X X X (-) (-) (-) Automation License Manager V X X (-) X X X (-) (-) (-) (-) Automation License Manager V X X (-) X (-) (-) (-) (-) (-) (-) Note: The current Automation License Manager is part of the STEP 7 system setup XP XP XP 7 CA 01 - Offline Mall von Automation and Drives STEP 7 V5.4 STEP 7 V5.5 Catalog CA 01 10/2010 English 10/2010 E86060-D4001-A500-C9 X X X - - X X X - X Catalog CA 01 10/2009 English 10/2009 E86060-D4001-A500-C8 X X X - - X X X - (-) Catalog CA 01 10/2008 English 10/2008 E86060-D4001-A500-C7 X X X - - X X (-) - (-) Catalog CA 01 10/2007 English 10/2007 E86060-D4001-A100-C6 X X X - - X X (-) - (-) XP XP XP 7 A5E
4 05/ b Compatibility List CFC STEP 7 V5.4 STEP 7 V5.5 XP XP XP 7 CFC V7.1 6ES EX17-2YA5 X - X - X - X 3) X X X 3) CFC V7.0 6ES EX07-2YA5 X X X 2) X X 2) - - X 2) X 2) - CFC V6.1 6ES EX16-2YA5 X X 1) (-) X 1) ) only as of CFC V6.1+ or higher 2) only as of CFC V6.1+ or higher 3) only as of CFC V6.1+ or higher D7-SYS für SIMATIC TDC, FM 458, T400, SIMADYN D STEP 7 V5.4 STEP 7 V5.5 D7-SYS V7.1 5) 6ES CC02-0YA5 (-) X X (-) X - - X X - D7-SYS V7.0 4) 6ES CC01-0YA5 X X (-) X D7-SYS V6.2 2) 6ES CC00-0YA5 X X 3) (-) X 3) D7-SYS-SFC 1) V6.2 2) 6ES CC00-0YA5 X X 3) (-) X 3) ) contains SFC V6.1 2) minimum requirements: STEP 7 V5.3 + and CFC V6.1 3) only as of D7-SYS V6.2+ or higher and CFC V6.1+ or higher 4) contains CFC V7.0 +, SFC V7.0 + minimum requirements: STEP 7 V5.4 + or higher 5) contains CFC V7.1, SFC V7.1; minimum requirements: STEP 7 V5.4 + or higher XP XP XP 7 4 A5E
5 Compatibility List 05/ b DOCPRO STEP 7 V5.4 STEP 7 V5.5 XP XP XP 7 DOCPRO V5.4 6ES CC03-0YA5 X X (-) (-) X X (-) X X X 1) DOCPRO V5.1+ 6ES CC02-0YE0 X X (-) X ) only as of DOCPRO V5.4+ or higher Drive ES STEP 7 V5.4 STEP 7 V5.5 Drive ES Basic V5.5 6SW JA00-5AA0 X X X X X - X X X X Drive ES Basic V5.4 6SW JA00-3AA0 X X X 1) X X - X 2) X 3) X 3) - Drive ES Graphic V6.0+HF1 6SW JB00-0AA0 X X X X X - - (-) (-) - Note: Drive ES Basic with the component STARTER cannot be installed alongside SIMOTION SCOUT or S7-Technology on one PC/programming device. Further information on Drive ES compatibility can be found on the Internet at: 1) only as of Drive ES Basic V5.4+ or higher 2) only as of Drive ES Basic V5.4+ or higher 3) only as of Drive ES Basic V5.4+SP5 or higher XP XP XP 7 A5E
6 05/ b Compatibility List Modular PID CONTROL STEP 7 V5.4 STEP 7 V5.5 Modular PID Control (Tool) V5.1.2 V5.1.1 XP XP XP 6ES AA11-0YX0 X X X (-) X X X X X X Modular PID Control (Tool) V5.1 6ES AA11-0YX0 X X (-) (-) X X (-) (-) (-) (-) Modular PID Control (Tool) V5.0 6ES AA10-0YX0 X X (-) Modular PID Control (FBs for S7) V5.1 6ES AA10-0YX0 X X X (-) X X X X X X Modular PID Control (FBs for S7) V5.0 6ES AA10-0YX0 X X (-) (-) PC-Adapter USB STEP 7 V5.4 STEP 7 V5.5 PC-Adapter USB V2.0 6ES CB20-0XA0 X X (-) X X X (-) PC-Adapter USB V1.2 6ES CB20-0XA0 X X (-) X (-) PC-Adapter USB V1.1 6ES CB20-0XA0 X X (-) X (-) Note: The functionality of PC-Adapter USB is integrated in STEP 7 V5.5. XP XP XP 7 PID Self-Tuner STEP 7 V5.4 STEP 7 V5.5 PID Self-Tuner (FBs) V5.1 6ES AA01-0YX0 X X X (-) X X X X X X PID Self-Tuner (FBs) V ES AA01-0YX0 X X (-) XP XP XP 7 6 A5E
7 Compatibility List 05/ b ProTool /Pro STEP 7 V5.4 STEP 7 V5.5 ProTool /Pro CS V6.0+ 6AV BX06-0DX0 X X X X - - ProTool /Pro RT V6.0+ 6AV BX06-0DX0 X X X X - - ProAgent CS V6.0+ 6AV BX06-0DX0 X X X X - - ProAgent RT/ MP/ OP V6.0+ 6AV BX06-0DX0 X X X X - - XP XP XP 7 Prodave MPI STEP 7 V5.4 STEP 7 V5.5 Prodave MPI/IE V6.1 6ES BA02-0YA0 - X X - - X X X - (-) Prodave MPI/IE V6.0 6ES BA01-0YA0 X X (-) X - - Prodave MPI V5.6 6ES BA00-0YA0 X (-) (-) XP XP XP 7 RF-Manager STEP 7 V5.4 STEP 7 V5.5 RF-Manager 2008 (V1.1) RF-Manager 2007 (V1.0) XP XP XP 6GT C*00-8AA5 - X (-) X - - 6GT C*00-7AA5 - X (-) A5E
8 05/ b Compatibility List S7-200 PC Access STEP 7 V5.4 STEP 7 V5.5 S7-200 PC Access V1.0 6ES CC01-0YX0 X X 1) (-) - - X 2) (-) X - (-) Further information on compatibility with S7-200 PC Access can be found on the Internet at: 1) only as of S7-200 PC Access V1.0 + or higher 2) only as of S7-200 PC Access V1.0 + or higher XP XP XP 7 S7-Distributed Safety STEP 7 V5.4 STEP 7 V5.5 XP XP XP 7 S7-Distributed Safety V5.4 6ES FC02-0YA5 X X X 2) X X 1) X 1) (-) X 2) X 2) X 3) S7-Distributed Safety V5.3 6ES FC01-0YA5 X X (-) ) only as of S7-Distributed Safety V5.4+ or higher 2) only as of S7-Distributed Safety V5.4+SP5 or higher 3) only as of S7-Distributed Safety V5.4+SP5 and S7-F Configuration Pack V5.5+SP7 or higher S7-F Systems STEP 7 V5.4 STEP 7 V5.5 S7-F Systems V6.1 6ES CC01-0YA5 - X X - X - - X X - S7-F Systems V6.0 6ES CC01-0YA5 X X X X X - - X - - S7-F Systems V5.2+ 6ES CC00-0YX0 X X X X Note: S7-F Systems requires CFC XP XP XP 7 8 A5E
9 Compatibility List 05/ b S7-GRAPH STEP 7 V5.4 STEP 7 V5.5 XP XP XP 7 S7-GRAPH V5.3 6ES CC06-0YA5 X X X 4) X 1) X 2) X 3) X 4) X 4) X 2) X 4) S7-GRAPH V5.2 6ES CC05-0YX0 X X (-) ) only as of S7-GRAPH V5.3+ or higher 2) only as of S7-GRAPH V5.3+ or higher 3) only as of S7-GRAPH V5.3+ or higher 4) only as of S7-GRAPH V5.3+SP6 or higher, as of S7-GRAPH V5.3+SP7 or higher also with 7 (64bit) and 2008 R2 (64bit) S7-HiGraph STEP 7 V5.4 STEP 7 V5.5 S7-HiGraph V5.3 6ES CC05-0YA5 X X X 1) X 1) X 1) - - X 1) X 1) - S7-HiGraph V5.2 6ES CC04-0YE0 X (-) (-) ) only as of S7-HiGraph V5.3+ or higher XP XP XP 7 S7-PCT STEP 7 V5.4 STEP 7 V5.5 XP XP XP 7 S7-PCT V2.2 - (-) (-) - (-) (-) (-) X 2) X 2) X 2) S7-PCT V2.1 - (-) (-) - (-) (-) (-) X X X S7-PCT V2.0 - X 1) X 1) - X 1) X 1) X 1) (-) (-) (-) Note: The respective current S7-PCT is a component of the general setup of STEP 7 1) only as of STEP 7 V5.4+SP5 or higher 2) only as of STEP 7 V5.5+; also with 7 (64bit) and 2008 R2 (64bit) A5E
10 05/ b Compatibility List S7-PDIAG STEP 7 V5.4 STEP 7 V5.5 XP XP XP 7 S7-PDIAG V5.3 6ES CC04-0YA5 X X X 2) X X 1) X 1) X 2) X 3) X 3) X 3) S7-PDIAG V5.1 6ES CC03-0YE0 X X (-) ) only as of S7-PDIAG V5.3+ or higher 2) only as of S7-PDIAG V5.3+ or higher 3) only as of S7-PDIAG V5.3+SP5 or higher, as of S7-PDIAG V5.3+SP6 or higher also with 7 (64bit) and 2008 R2 (64bit) S7-PLCSIM STEP 7 V5.4 STEP 7 V5.5 XP XP XP 7 S7-PLCSIM 1) V5.4 6ES CC05-0YA5 X 2) X 2) X 4) X 2) X 2) X 4) X 4) X 4) X 2) X 5) S7-PLCSIM V5.3 6ES CC04-0YA5 X X (-) X 3) (-) - - X X - S7-PLCSIM V5.2 6ES CC03-0YE0 X (-) (-) ) S7-PLCSIM V5.4 or higher cannot be used with STEP 7 Lite, please use S7-PLCSIM V5.3+ 2) only as of STEP 7 V5.4+ or higher 3) only as of S7-PLCSIM V5.3+ or higher 4) only as of S7-PLCSIM V5.4+ or higher 5) only as of S7-PLCSIM V5.4+ or higher, as of S7-PLCSIM V5.4+SP5 or higher also with 7 (64bit) and 2008 R2 (64bit) S7-SCL STEP 7 V5.4 STEP 7 V5.5 XP XP XP 7 S7-SCL V5.3 6ES CC05-0YA5 X X X 3) X 1) X 2) X 2) X 3) X 3) X 2) X 3) S7-SCL V5.1+ 6ES CC04-0YX0 X X (-) ) only as of S7-SCL V5.3+ or higher 2) only as of S7-SCL V5.3+ or higher 3) only as of S7-SCL V5.3+SP5 or higher, as of S7-SCL V5.3+SP6 or higher also with 7 (64bit) and 2008 R2 (64bit) 10 A5E
11 Compatibility List 05/ b S7-Technology STEP 7 V5.4 STEP 7 V5.5 S7-Technology V4.2 6ES CC42-0YA5 - - X 2) (-) 2) X - (-) S7-Technology V4.1 6ES CC41-0YX0 - X 1) (-) X - - S7-Technology V3.0 6ES CC30-0YX0 X X (-) (-) - - S7-Technology V2.0 6ES CC20-0YX0 X X (-) Note: S7-Technology cannot be installed alongside SIMOTION SCOUT or Drive ES Basic with the component STARTER on one PC/programming device. For the function "Drive Control Chart (DCC), S7 technology contains certain versions of the CFC product and cannot be combined with other versions of CFC. 1) only as of STEP 7 V5.4+ or higher 2) only as of STEP 7 V5.4+SP5 or higher XP XP XP 7 SIMATIC imap STEP 7 V5.4 STEP 7 V5.5 SIMATIC imap V3.0+ 6ES CC04-0YA5 - X X X X - - X X X SIMATIC imap V3.0 6ES CC04-0YA5 X X X 1) X X 1) X 1) (-) X 1) X 1) - SIMATIC imap V2.0+ 6ES CC03-0YX0 X X (-) X Note: to run SIMATIC imap, the SIMATIC imap STEP 7-Add-on suitable for the STEP 7 Version must be installed. This ships on the STEP 7 DVD or can be obtained from the Internet. 1) only as of SIMATIC imap V3.0+ or higher XP XP XP 7 A5E
12 05/ b Compatibility List SIMATIC Logon STEP 7 V5.4 STEP 7 V5.5 SIMATIC Logon V1.4 6ES BX41-2YA0 X X X 1) X X 1) X 1) X 1) X 1) X 1) X 2) Note: With STEP 7 as of V5.4+, you should use SIMATIC Logon V1.4+ or higher. SIMATIC Logon V1.4+ can only be used with STEP 7 V5.5+ or higher on 7 (64bit) and 2008 R2 (64bit). 1) only as of SIMATIC Logon V1.4+ or higher 2) only as of SIMATIC Logon V1.4+ or higher SIMATIC Maintenance Station STEP 7 V5.4 STEP 7 V5.5 SIMATIC Maintenance Station 2009 (V2.0) SIMATIC Maintenance Station 2007 (V1.0) 1) only as of STEP 7 V5.4+ or higher 2) only as of SIMATIC Maintenance Station or higher XP XP XP XP XP XP 6ES WD01-0YA0 - X X - X - X X X - 6ES WD00-0YA0 - X 1) (-) X 1) X 2) - - (-) X 2) A5E
13 Compatibility List 05/ b SIMATIC NET STEP 7 V5.4 STEP 7 V5.5 SIMATIC NET PC Software Comprising: DP-5613 S SOFTNET-DP SOFTNET-DP Slave SOFTNET-S7 CP5613/CP5614 Software DP-Base S SOFTNET-S7 SOFTNET-PG SOFTNET-S7 Lean S7-RedConnect Power Pack S7-RedConnect SNMP OPC Server Basic SNMP OPC Server Extended SNMP OPC Server Power Pack Softnet PROFINET IO NCM PC / S7 V8.1 V8.1 V8.1 V8.1 V8.1 V8.1 V8.1 V8.1 V8.1 V8.1 V8.1 V8.1 V8.1 V8.1 V8.1 V8.1 V8.1 V GK DB81-3AA0 6GK CB81-3AA0 6GK DW81-3AA0 6GK SW81-3AA0 6GK CW81-3AA0 Ships with CP 6GK CB81-3AA0 6GK CW81-3AA0 6GK PW81-3AA0 6GK LW81-3AA0 6GK HB81-3AC0 6GK HB81-3AA0 6GK NW81-3AA0 6GK NX81-3AA0 6GK NW81-3AC0 6GK HW81-3AA XP XP XP X 1) A5E
14 05/ b Compatibility List SIMATIC NET STEP 7 V5.4 STEP 7 V5.5 SIMATIC NET PC Software V8.0 Comprising: DP-5613 V8.0 6GK DB80-3AA0 S V8.0 6GK CB80-3AA0 SOFTNET-DP V8.0 6GK DW80-3AA0 SOFTNET-DP Slave V8.0 6GK SW80-3AA0 SOFTNET-S7 V8.0 6GK CW80-3AA0 CP5613/CP5614 Software DP-Base V8.0 Ships with CP S V8.0 6GK CB80-3AA0 SOFTNET-S7 V8.0 6GK CW80-3AA0 SOFTNET-PG V8.0 6GK PW80-3AA0 SOFTNET-S7 Lean V8.0 6GK LW80-3AA0 S7-RedConnect Power Pack V8.0 6GK HB80-3AC0 S7-RedConnect V8.0 6GK HB80-3AA0 SNMP OPC Server Basic V8.0 6GK NW80-3AA0 SNMP OPC Server Extended V8.0 6GK NX80-3AA0 SNMP OPC Server Power Pack V8.0 6GK NW80-3AC0 Softnet PROFINET IO V8.0 6GK HW80-3AA0 NCM PC / S7 V XP XP XP X 14 A5E
15 Compatibility List 05/ b SIMATIC NET STEP 7 V5.4 STEP 7 V5.5 SIMATIC NET PC Software 2008 Comprising: (V7.1) DP GK DB71-3AA0 S GK CB71-3AA0 FMS GK FB71-3AA0 SOFTNET-DP GK DW71-3AA0 SOFTNET-DP Slave GK SW71-3AA0 SOFTNET-S GK CW71-3AA0 CP5613/CP5614 Software DP-Base 2008 Ships with CP S GK CB71-3AA0 SOFTNET-S GK CW71-3AA0 SOFTNET-PG GK PW71-3AA0 SOFTNET-S7 Lean GK LW71-3AA0 S7-RedConnect Power Pack GK HB71-3AC0 S7-RedConnect GK HB71-3AA0 SNMP OPC Server Basic GK NW71-3AA0 SNMP OPC Server Extended GK NX71-3AA0 SNMP OPC Server Power Pack GK NW71-3AC0 PROFINET CBA OPC Server GK HB71-3AA0 Softnet PROFINET IO GK HW71-3AA0 TF GK TB71-3AA0 NCM PC / S7 V XP XP XP - X X - X - X X X - 7 A5E
16 05/ b Compatibility List SIMATIC NET STEP 7 V5.4 STEP 7 V5.5 SIMATIC NET PC Software 2007 Comprising: (V7.0) DP-5613 V7.0 6GK DB70-3AA0 S V7.0 6GK CB70-3AA0 FMS-5613 V7.0 6GK FB70-3AA0 SOFTNET-DP V7.0 6GK DW70-3AA0 SOFTNET-DP Slave V7.0 6GK SW70-3AA0 SOFTNET-S7 V7.0 6GK CW70-3AA0 CP5613/CP5614 Software DP-Base V7.0 Ships with CP S V7.0 6GK CB70-3AA0 SOFTNET-S7 V7.0 6GK CW70-3AA0 SOFTNET-PG V7.0 6GK PW70-3AA0 SOFTNET-S7 Lean V7.0 6GK LW70-3AA0 S7-RedConnect Power Pack V7.0 6GK HB70-3AC0 S7-RedConnect V7.0 6GK HB70-3AA0 SNMP OPC Server Basic V7.0 6GK NW70-3AA0 SNMP OPC Server Extended V7.0 6GK NX70-3AA0 SNMP OPC Server Power Pack V7.0 6GK NW70-3AC0 DX OPC Server V7.0 6GK XW70-3AA0 PN OPC Server V7.0 6GK HB70-3AA0 Softnet PROFINET IO V7.0 6GK HW70-3AA0 TF-1613 V7.0 6GK TB70-3AA0 NCM PC / S7 V XP XP XP - X - X X X - (-) (-) A5E
17 Compatibility List 05/ b SIMATIC NET STEP 7 V5.4 STEP 7 V5.5 SIMATIC NET PC Software 2006 X X - X Comprising: () DP-5613 S FMS-5613 SOFTNET-DP SOFTNET-DP Slave SOFTNET-S7 CP5613/CP5614 Software DP-Base S SOFTNET-S7 SOFTNET-PG SOFTNET-S7 Lean S7-RedConnect upgrade S7-RedConnect SNMP OPC Server Basic SNMP OPC Server Extended SNMP OPC Server Power Pack DX OPC Server PN OPC Server Softnet PROFINET IO TF-1613 NCM PC / S7 V GK DB64-3AA0 6GK CB64-3AA0 6GK FB64-3AA0 6GK DW64-3AA0 6GK SW64-3AA0 6GK CW64-3AA0 Ships with CP 6GK CB64-3AA0 6GK CW64-3AA0 6GK PW64-3AA0 6GK LW64-3AA0 6GK HB64-3AA4 6GK HB64-3AA0 6GK NW64-3AA0 6GK NX64-3AA0 6GK NW64-3AA4 6GK XW64-3AA0 6GK HB64-3AA0 6GK HW64-3AA0 6GK TB64-3AA Note: Further information on compatibility with SIMATIC NET can be found on the Internet at: 1) also with 7 (64bit) and 2008 R2 (64bit) XP XP XP 7 A5E
18 05/ b Compatibility List SIMATIC PDM STEP 7 V5.4 STEP 7 V5.5 SIMATIC PDM V6.0 6ES AX06-0YA5 X X X 1) X 1) - - SIMATIC PDM V5.2 6ES AX05-0YC0 X (-) (-) ) only as of SIMATIC PDM V6.0+SP5 XP XP XP 7 SIMATIC Safety Matrix STEP 7 V5.4 STEP 7 V5.5 SIMATIC Safety Matrix V6.2 6ES SM*2-0YA5 - X X X X - - X X - SIMATIC Safety Matrix V6.1 6ES SM*1-0YA5 X X X X X - - X X - SIMATIC Safety Matrix V5.2 6ES SM00-0YA5 X X (-) Note: SIMATIC Safety Matrix requires S7-F Systems and CFC XP XP XP 7 SIMATIC BDE STEP 7 V5.4 STEP 7 V5.5 SIMATIC BDE V7.2 6AV EW06-0*X0 X X (-) (-) - - SIMATIC BDE V7.1 6BQ AB20-0CA0 X XP XP XP 7 18 A5E
19 Compatibility List 05/ b SIMOTION SCOUT STEP 7 V5.4 STEP 7 V5.5 SIMOTION Scout V AU1 810-*BA41-4XA0 - - X 3) X 4) SIMOTION Scout V AU1 810-*BA41-2XA0 - X 2) X 3) SIMOTION Scout V AU1 810-*BA41-1XA0 - X 1) (-) SIMOTION Scout V4.0 6AU BA40-0XE0 X X (-) Note: SIMOTION SCOUT cannot be installed alongside S7-Technology or Drive ES Basic with the component STARTER on one PC/programming device. Further information on SIMOTION Scout compatibility can be found on the Internet at: 1) only as of STEP 7 V5.4+ 2) only as of STEP 7 V5.4+ 3) only as of STEP 7 V5.4+ 4) only as of STEP 7 V5.4+; only with dows 32bit + Business XP XP XP 7 SINAUT ST7 STEP 7 V5.4 STEP 7 V5.5 SINAUT ST7 V5.1 6NH CA50-0AA0 - X 1) X 1) - X 1) X 1) X 1) X X (-) SINAUT ST7 V5.0 6NH CA50-0AA0 - X X - X X X X X (-) SINAUT ST7 V4.1 6NH CA15-0AA0 X X (-) X (-) - - SINAUT ST7 V4.0 6NH CA15-0AA0 X X (-) X (-) - - SINAUT ST7 V3.6 6NH CA15-0AA0 X X (-) X (-) - - 1) only as of STEP 7 V5.4+ XP XP XP 7 A5E
20 05/ b Compatibility List SINEMA STEP 7 V5.4 STEP 7 V5.5 SINEMA E Lean / Standard 2006 (V1.0) 6GK AA00-6AA0 6GK AA00-6AA0 1) only as of SINEMA E Lean / Standard (V1.0+) or higher 2) only as of SINEMA E Lean / Standard (V1.0+) or higher 3) only as of SINEMA E Lean / Standard (V1.0+) or higher XP XP XP - X X 2) - - X 1) X 3) X 3) A5E
21 Compatibility List 05/ b SIRIUS Engineering STEP 7 V5.4 STEP 7 V5.5 Modular Safety System ES ZS CC10-0YA5 X X X 1) - - X (-) X 1) - - (V1.0) Motor Starter ES ZS1 310-*CC10-0YA5 X X X 2) - - X 2) (-) X 2) - X 10) (V4.0) Soft Starter ES ZS1 313-*CC10-0YA5 X X X 3) - - X 3) (-) X 3) - X 11) (V2.0) Switch ES Motor Starter ZS CC20-0YA0 X X (-) SIMOCODE ES ZS1 312-*CC10-0YA5 X X X 4) - - X 4) (-) X 4) - - (V2.0) SIMOCODE-ES Professional ZS CC10-0YA0 X X (-) (-) (-) - - WIN-SIMOCODE-DP Professional V1.3 3UF AA00-0 X X X 5) - - X 6) (-) X 5) - - OM-SIMOCODE-DP V1.1 3UF AA00-0 X X X 7) - - X 7) (-) X 7) - - Objekt Manager DP/ASi F-Link V1.0 6RK3 141-*CD10 X 8) X 8) X 9) X 8) X 9) X 9) X 9) X 9) X 9) - 1) only as of Modular Safety System ES (V1.0+) 2) only as of Motor Starter ES (V4.0+) 3) only as of Soft Starter ES (V2.0+) 4) only as of SIMOCODE ES HF1 (V2.0++HF1) 5) but not with WIN-SIMOCODE-DP Professional V1.3+ 6) only as of WIN-SIMOCODE-DP Professional V1.3+ 7) only as of OM-SIMOCODE-DP V1.1++HF2 8) minimum requirements: STEP 7 V5.4+ or higher and S7-Distributed Safety V5.4+ or higher 9) only as of Objekt Manager DP/ASi F-Link V1.0+; minimum requirements: STEP 7 V5.4+ or higher and S7-Distributed Safety V5.4+ or higher 10) only as of Motor Starter ES (V4.0+) 11) only as of Soft Starter ES (V2.0+) XP XP XP 7 A5E
22 05/ b Compatibility List SM Ultrasonic STEP 7 V5.4 STEP 7 V5.5 SM Ultrasonic V5.1 HW: 6ES UH01-0AC0 SW: 6AT DA00-2YA0 XP XP XP X X (-) X (-) Standard PID Control STEP 7 V5.4 STEP 7 V5.5 Standard PID Control (Tool) V5.2.2 V5.2.1 XP XP XP 6ES AA22-0YX0 X X X (-) X X X X X X Standard PID Control (Tool) V5.2 6ES AA22-0YX0 X X (-) (-) X X (-) (-) (-) (-) Standard PID Control (Tool) V5.1 6ES AA21-0YX0 X X (-) (-) - - Standard PID Control (FBs) V5.2 6ES AA21-0YX0 X X X (-) X X X X X X Standard PID Control (FBs) V5.1 6ES AA21-0YX0 X X (-) (-) STARTER (drive commissioning tool) STEP 7 V5.4 STEP 7 V5.5 STARTER V4.2 6SL AA00-0AG0 X X X - X - X X X X STARTER V4.1 6SL AA00-0AG0 X X X 1) X (-) - X 2) X 1) (-) - STARTER V4.0 6SL AA00-0AG0 X X (-) X (-) - - (-) (-) - Note: STARTER cannot be installed simultaneously with SIMOTION SCOUT or S7 Technology on the same PC/PG. 1) only as of STARTER V4.1+ or higher 2) only as of STARTER V4.1+ or higher XP XP XP 7 22 A5E
23 Compatibility List 05/ b STEP 7 Lite STEP 7 V5.4 STEP 7 V5.5 STEP 7 Lite V3.0 6ES CC07-0YA5 X X X 1) X 1) - - STEP 7 Lite V2.0 6ES CC06-0YE0 X (-) (-) ) only as of STEP 7 Lite V3.0+ or higher XP XP XP 7 STEP 7-Micro/WIN STEP 7 V5.4 STEP 7 V5.5 STEP 7-Micro/WIN V4.0 6ES CC03-0YX0 X X X 1) - - X 1) X 1) X 1) - (-) STEP 7-Micro/WIN V3.2 6ES BC02-0YX0 X (-) (-) Note: Further information on compatibility with STEP 7-Micro/ can be found on the Internet at: 1) only as of STEP 7-Micro/WIN V4.0+SP7 or higher XP XP XP 7 A5E
24 05/ b Compatibility List Technical Product Data for CAx Applications STEP 7 V5.4 STEP 7 V5.5 Technical Product Data for CAx Industrial Automation Systems Technical Product Data for CAx Industrial Automation Systems Technical Product Data for CAx Industrial Automation Systems Technical Product Data for CAx Industrial Automation Systems Technical Product Data for CAx Industrial Automation Systems Technical Product Data for CAx Low-Voltage Controls and Distribution XP XP XP ES CD01-0YX0 X X X X ES CD01-0YX0 X X (-) ES CD01-0YX0 X X (-) /2005 6ES CC00-0YX0 X X (-) /2004 6ES CC00-0YX0 X X (-) / E86060-D1000-A207-A X X (-) A5E
25 Compatibility List 05/ b Technological Functions STEP 7 V5.4 STEP 7 V5.5 Easy Motion Control V ES AC01-0YX0 X X X (-) X X X X X X Easy Motion Control V2.1 6ES AC01-0YX0 X X (-) (-) X X (-) (-) (-) (-) Easy Motion Control V2.0 6ES AC01-0YX0 X X (-) FM 350-1, V6.0.1 HW: 6ES AH0*-0AE0 X X X (-) X X X X X X IF-CT1 Counter HW: 6ES AP00-0AE0 HW: 6ES AA00-0AC0 FM 350-1, V6.0 HW: 6ES AH0*-0AE0 X X (-) (-) X X (-) (-) (-) - IF-CT1 Counter HW: 6ES AP00-0AE0 HW: 6ES AA00-0AC0 FM 350-1, V5.1 HW: 6ES AH0*-0AE0 X X (-) IF-CT1 Counter HW: 6ES AP00-0AE0 HW: 6ES AA00-0AC0 FM Counter V6.0.1 HW: 6ES AH00-0AE0 X X X (-) X X X X X X FM Counter V6.0 HW: 6ES AH00-0AE0 X X (-) (-) X X (-) (-) (-) - FM Counter V4.0.3 HW: 6ES AH00-0AE0 X X (-) FM 351, 451 Positioning V6.0.1 HW: 6ES AH0*-0AE0 X X X (-) X X X X X X HW: 6ES AL00-0AE0 FM 351, 451 Positioning V6.0 HW: 6ES AH0*-0AE0 X X (-) (-) X X (-) (-) (-) - HW: 6ES AL00-0AE0 FM 351, 451 Positioning V5.0.1 HW: 6ES AH0*-0AE0 X X (-) HW: 6ES AL00-0AE0 FM 352, 452 Cam V6.0.2 HW: 6ES AH0*-0AE0 X X X (-) X X X X X X HW: 6ES AH00-0AE0 FM 352, 452 Cam V6.0.1 V6.0 HW: 6ES AH0*-0AE0 HW: 6ES AH00-0AE0 X X (-) (-) X X X X X - XP XP XP 7 A5E
26 05/ b Compatibility List Technological Functions STEP 7 V5.4 STEP 7 V5.5 FM 352, 452 Cam V5.0.1 HW: 6ES AH01-0AE0 HW: 6ES AH00-0AE0 FM V1.2.2 HW: 6ES AH1*-0AE0 Programming Environment HW: 6ES AH0*-0AE0 FM V1.2.1 HW: 6ES AH1*-0AE0 Programming Environment HW: 6ES AH0*-0AE0 FM V1.2 HW: 6ES AH1*-0AE0 Programming Environment HW: 6ES AH0*-0AE0 FM V1.1 HW: 6ES AH1*-0AE0 Programming Environment HW: 6ES AH0*-0AE0 FM 353 Step V ES AH01-7AG0 HW: 6ES AH01-0AE0 FM 353 Step V ES AH01-7AG0 HW: 6ES AH01-0AE0 FM 353 Step V4.03 6ES AH01-7AG0 HW: 6ES AH01-0AE0 FM 354 Servo V ES AH01-7AG0 HW: 6ES AH01-0AE0 FM 354 Servo V ES AH01-7AG0 HW: 6ES AH01-0AE0 FM 354 Servo V4.03 6ES AH01-7AG0 HW: 6ES AH01-0AE0 FM 453 Step/Servo V ES AH00-7AG0 HW: 6ES AH00-0AE0 FM 453 Step/Servo V ES AH00-7AG0 HW: 6ES AH00-0AE0 XP XP XP X X (-) X X X (-) X X X X X X X X (-) (-) X X X X X - X X (-) (-) X X (-) (-) (-) - X X (-) X X X (-) X X X X X X X X (-) (-) X X (-) (-) (-) - X X (-) (-) (-) X X X (-) X X X X X X X X (-) (-) X X (-) (-) (-) - X X (-) (-) (-) X X X (-) X X X X X X X X (-) (-) X X (-) (-) (-) A5E
27 Compatibility List 05/ b Technological Functions STEP 7 V5.4 STEP 7 V5.5 FM 453 Step/Servo V3.03 6ES AH00-7AG0 HW: 6ES AH00-0AE0 FM 355, 455 PID Control V6.1.1 HW: 6ES7 355-*VH*0-0AE0 HW: 6ES7 455-*VS00-0AE0 FM 355, 455 PID Control V6.1 HW: 6ES7 355-*VH*0-0AE0 HW: 6ES7 455-*VS00-0AE0 FM 355, 455 PID Control V6.0 HW: 6ES7 355-*VH*0-0AE0 HW: 6ES7 455-*VS00-0AE0 FM 355, 455 PID Control V5.0.1 HW: 6ES7 355-*VH*0-0AE0 HW: 6ES7 455-*VS00-0AE0 FM V6.1.1 HW: 6ES CH00-0AE0 HW: 6ES SH00-0AE0 FM V6.1 HW: 6ES CH00-0AE0 HW: 6ES SH00-0AE0 FM V6.0 HW: 6ES CH00-0AE0 HW: 6ES SH00-0AE0 FM V5.1 HW: 6ES CH00-0AE0 HW: 6ES SH00-0AE0 FM V5.3.6 for HW: 6ES AH03-3AE0 (L) 6ES BH03-3AE0 (LX) 6ES CH03-3AE0 (H) FM V5.03 for HW: 6ES AH03-3AE0 (L) 6ES BH03-3AE0 (LX) 6ES CH03-3AE0 (H) XP XP XP X X (-) (-) (-) X X X (-) X X X X X X X X (-) (-) X X (-) (-) (-) - X X (-) X (-) X X (-) X X X (-) X X X X X X X X (-) (-) X X (-) (-) (-) - X X (-) X (-) X X (-) X X X (-) X X X X X X X X (-) (-) (-) - 7 A5E
28 05/ b Compatibility List Technological Functions STEP 7 V5.4 STEP 7 V5.5 PtP Param for CP 340, CP 341, CP 440 and CP 441-1/2 PtP Param for CP 340, CP 341, CP 440 and CP 441-1/2 V V V5.1.9 HW: 6ES *H0*-0AE0 HW: 6ES *H0*-0AE0 HW: 6ES CS00-0YE0 HW: 6ES7 441-*AA0*-0AE0 HW: 6ES *H0*-0AE0 HW: 6ES *H0*-0AE0 HW: 6ES CS00-0YE0 HW: 6ES7 441-*AA0*-0AE0 Modbus Master V ES AA00-0YA0 HW: 6ES *H0*-0AE0 HW: 6ES AA0*-0AE0 Modbus Master V ES AA00-0YA0 V3.1.4 HW: 6ES *H0*-0AE0 HW: 6ES AA0*-0AE0 Modbus Slave V ES AB00-0YA0 HW: 6ES *H0*-0AE0 HW: 6ES AA0*-0AE0 Modbus Slave V ES AB00-0YA0 V3.1.5 HW: 6ES *H0*-0AE0 HW: 6ES AA0*-0AE0 Data Highway V ES AE00-0YA0 HW: 6ES *H0*-0AE0 HW: 6ES AA0*-0AE0 CP 444 V ES MX00-7xG0 HW: 6ES MX00-0XE0 CP 444 V ES MX00-7xG0 HW: 6ES MX00-0XE0 1) but not with STEP 7 V5.4+ or higher XP XP XP X X X (-) X X X X X X X X X (-) X X X (-) (-) - X X X (-) X X X X X X X X X (-) X X X (-) (-) - X X X (-) X X X X X X X X X (-) X X X (-) (-) - X X X (-) X X X X X X X X (-) (-) X X 1) (-) 1) X X (-) X (-) A5E
Compatibility list for SIMATIC software packages with various versions of the STEP 7 Standard package.
Compatibility list for SIMATIC software packages with various versions of the STEP 7 Standard package. Description of characters: X = combination perwithted = combination not perwithted ( ) = combintion
SIMATIC Industrial Software
Siemens AG 200 SIMATIC Industrial Software /2 Introduction /2 Software for SIMATIC S/C/WinAC /3 Standard Tools /3 STEP /6 STEP Professional / STEP Lite /9 STEP -Micro/WIN /10 STEP -Micro/WIN instruction
Software for SIMATIC controllers
Siemens AG 2013 Software for SIMATIC controllers /2 Introduction /2 Software for SIMATIC Controller /3 Information on software licensing /3 Software Update Service /4 Controller Software inside TIA Portal
http://www.automation.siemens.com/net/html_76/support/printkatalog.htm
Catalog IK PI, 2009 http://www.automation.siemens.com/net/html_76/support/printkatalog.htm Industrial Communication for Automation and Drives Contains detailed information related to components of the
SIMATIC Software on server. Available softwares : STEP 7 Professional For applications development on the S7-300 and S7-400 PLC series.
SIMATIC Software on server. The access to the software is free nevertheless, for protection reasons, it is restricted to the authorized users. To acquire the access rights you must be registered from a
Parameterization, Configuration and Visualization with SIRIUS
Parameterization, Configuration and Visualization with SIRIUS Price groups 200, 346, 42B, 42C, 42D, 42H, 42J, 4N1 /2 Introduction /5 Soft Starter ES /9 SIRIUS 3RW44 soft starter block library for SIMATIC
SIMATIC programming devices
Siemens AG 2011 SIMATIC programming devices /2 Programming devices /2 Field PG M3 /6 Accessories /6 External prommer /7 /7 SOFTNET for PROFIBUS /9 SOFTNET for Industrial Ethernet /11 SOFTNET PN IO /13
SIMATIC WinCC SCADA system - SIMATIC WinCC
Overview PC-based operator control and monitoring system for visualizing and operating processes, production flows, machines and plants in all sectors - with the simple single-user station through to distributed
SIMATIC Software. SIMATIC Controller Software. Tools for configuring and programming SIMATIC Controllers. Brochure April 2009. Answers for industry.
SIMATIC Controller Software Tools for configuring and programming SIMATIC Controllers Brochure April 2009 SIMATIC Software Answers for industry. Totally Integrated Automation Rely on new productivity standards
SIMATIC Software. SIMATIC Controller Software. Tools for configuring and programming SIMATIC Controllers. Brochure April 2010. Answers for industry.
SIMATIC Controller Software Tools for configuring and programming SIMATIC Controllers Brochure April 2010 SIMATIC Software Answers for industry. Totally Integrated Automation Rely on new productivity standards
SIMATIC Controller Software Tools for configuring and programming SIMATIC Controllers Brochure November 2010 SIMATIC Software Answers for industry.
SIMATIC Controller Software Tools for configuring and programming SIMATIC Controllers Brochure November 2010 SIMATIC Software Answers for industry. SIMATIC Controller Software Universal development software
PROFIBUS. 4/2 System interfacing for PG/PC 4/2 Overview 4/5 CP 5603 4/11 CP 5623 4/17 CP 5624 4/23 CP 5711
/2 System interfacing for PG/PC /2 Overview /5 CP 5603 /11 CP 5623 /17 CP 562 /23 CP 5711 /28 Industrial controls Motor starters for operation in the field, high degree of protection Sec.6 SIRIUS M200D
CPUs - CPU 315-2 PN/DP
Overview The CPU with a medium program memory and quantity framework High processing performance in binary and floating-point arithmetic Used as a central controller on production lines with central and
SIMATIC HMI. WinCC flexible 2008 Compact / Standard / Advanced. Preface Introduction to WinCC flexible. WinCC flexible Engineering System
SIMATIC HMI WinCC flexible 2008 SIMATIC HMI WinCC flexible 2008 Compact / Standard / Advanced User's Manual This manual is part of the documentation package with the order number 6AV6691-1AB01-3AB0. 07/2008
Software for SIMATIC controllers
Siemens AG 2015 /2 Introduction /2 /3 Information on software licensing /3 Software Update Service /4 Controller software in the TIA Portal /4 STEP 7 (TIA Portal) /7 STEP 7 Safety (TIA Portal) /9 STEP
SIMATIC PCS 7. SIMATIC Maintenance Station PDM A stand-alone Solution. Siemens AG 2011. All Rights Reserved.
SIMATIC PCS 7 SIMATIC Maintenance Station PDM A stand-alone Solution SIMATIC Maintenance Station PDM Use Independent Maintenance Station of a used Distributed Control System (DCS) or Process Logic Controller
SIMATIC Controllers. The innovative solution for all automation tasks SIMATIC. Answers for industry. Edition April 2013. Overview.
The innovative solution for all automation tasks SIMATIC Overview Edition April 2013 Answers for industry. System-wide engineering, communications and diagnostics SIMATIC Modular Controllers Your benefits
C o v e r. Thin Client Application Options. SIMATIC Thin Client s FAQ h April 2009 e et. Service & Support. Answers for industry.
C o v e r SIMATIC Thin Client s FAQ h April 2009 e et Service & Support Answers for industry. Question This entry originates from the Service & Support Portal of Siemens AG, Sector Industry, Industry Automation
Cut down your costs, increase your productions efficiently with the knowledge of PLC s Siemens technology. SITRAIN TM THAILAND Page 1 of 14
Training Center Digital Factory and Process Industries & Drives 1. Introduction 2. Course content 3. Course Schedule 4. Terms and Condition 5. Registration Channel Page 1 of 14 1. Introduction SITRAIN
SIMATIC S7-300. Getting Started for First Time Users. Order No.: 6ZB5310-0NC02-0BA0 04/2007 A5E01094750-01
SIMATIC S7-300 Getting Started for First Time Users Order No.: 6ZB5310-0NC02-0BA0 04/2007 A5E01094750-01 Safety Guidelines This manual contains notices you have to observe in order to ensure your personal
SOFTLINK 300. CPU Specifications. Reference Manual
SOFTLINK 300 Reference Manual This manual is part of the documentation Package with the order number 300 314-1SL01 300 314-2DP01 300 315-2DP01 Edition 04/2011 i Preface Purpose of the manual This manual
SIMATIC NET. Functions (FC) and function blocks (FB) for SIMATIC NET S7 CPs. Preface. Overview and general information on working with FCs and FBs
Preface Overview and general information on working with FCs and FBs 1 SIMATIC NET Functions (FC) and function blocks (FB) for SIMATIC NET S7 CPs Programming Manual FCs / FBs for Industrial Ethernet 2
SCE Guide Trainer Packages
SCE Guide Trainer Packages Siemens Automation Cooperates with Education (SCE) 01/2016 siemens.com/sce Siemens Automation Cooperates with Education (SCE) Simplify your education in automation The Siemens
SIMATIC NET. S7-CPs for Industrial Ethernet Configuring and Commissioning
SIMATIC NET S7-CPs for Industrial Ethernet Configuring and Commissioning Manual Part A - General Application Preface, Contents Communication in S7 Stations 1 Characteristics of the Ethernet CPs 2 Commissioning
Applications & Tools. Configuration and Diagnostics of a PROFINET IO System. PROFINET IO Configuration Example. Application Description January 2010
Cover Sheet Configuration and Diagnostics of a PROFINET IO System PROFINET IO Configuration Example Application Description January 2010 Applications & Tools Answers for industry. Industry Automation and
Siemens solutions for automotive
Siemens solutions for automotive Automotive Strategy & new technology 西 门 子 汽 车 行 业 战 略 与 新 技 术 Mr. Wang HaiBin General Manager of Industry Automation Division Senior Vice President of Siemens Ltd China
Service & Support. How Can You Have Diagnostics Data of IPCs Displayed in WinCC? WinCC, IPC and DiagMonitor. FAQ July 2011. Answers for industry.
Cover sheet How Can You Have Diagnostics Data of IPCs Displayed in WinCC? WinCC, IPC and DiagMonitor FAQ July 2011 Service & Support Answers for industry. Question This entry originates from the Service
SIMATIC PCS 7 Process Control System
SIMATIC PCS 7 Process Control System System components SIMATIC PCS 7 Catalog ST PCS 7 Edition 2014/15 Answers for industry. Related catalogs SIMATIC SIMATIC PCS 7 Process Control System Technology components
Service & Support. How can you establish a connection between a S7-1200 PLC and SIMATIC NET OPC? S7-1200 PLC, SIMATIC NET OPC.
Cover How can you establish a connection between a S7-1200 PLC and SIMATIC NET OPC? S7-1200 PLC, SIMATIC NET OPC FAQ November 2009 Service & Support Answers for industry. Question This entry is from the
SIMATIC STEP 7 in the Totally Integrated Automation Portal
SIMATIC STEP 7 in the Totally Integrated Automation Portal Intuitive and efficient engineering from the microcontroller to the PC-based controller SIMATIC Software Brochure Edition November 2012 Answers
WinCC. Communication Manual. Manual 2. This manual is part of the documentation package with the order number: 6AV6392-1CA05-0AB0 C79000-G8276-C156-01
WinCC Communication Manual Manual 2 This manual is part of the documentation package with the order number: 6AV6392-1CA05-0AB0 Release: September 1999 WinCC, SIMATIC, SINEC, STEP are trademarks of Siemens.
Industrial Communication for Automation and Drives Overview automation s Open communication at a glance Data communication Data communication is used for data interchange between programmable controllers
Service & Support. How can you establish a connection between an S7-1200 PLC and SIMATIC NET OPC? S7-1200 PLC, SIMATIC NET OPC.
Cover How can you establish a connection between an S7-1200 PLC and SIMATIC NET OPC? S7-1200 PLC, SIMATIC NET OPC FAQ January 2010 Service & Support Answers for industry. This entry is from the Service&Support
Configuration limits for products of the SIMATIC NET PC Software V12 SIMATIC NET. Configuration limits for products of the SIMATIC NET PC Software V12
Configuration limits for products of the SIMATIC NET PC Software V12 Communications partners and configuration limits for HARDNET-PB DP-Base 1 software Configuration limits, SOFTNET-PB DP 2 SIMATIC NET
S7-1500/S7-1500F Technical Data
CPU 1511-1 PN CPU 1513-1 PN CPU 1515-2 PN Type Standard CPU Standard CPU Standard CPU Dimensions 35 x 125 x 130 mm 35 x 125 x 130 mm 70 x 147 x 129 mm Spare part availability after 10 years 10 years 10
SIMATIC S7-1200. It s the Interplay that makes the difference. Siemens AG 2010. All Rights Reserved.
SIMATIC S7-1200 It s the Interplay that makes the difference SIMATIC S7-1200 Controller SIMATIC S7-1200 CPUs CPU 1211C 3 configurations per CPU Dimensions W x H x D (mm) CPU 1212C CPU 1214C DC/DC/DC, AC/DC/RLY,
SIMATIC. Windows Automation Center WinAC Slot Version 4.0. Preface, Contents. Product Overview 1. Installing the CPU 41x-2 PCI.
s SIMATIC Windows Automation Center WinAC Slot Version 4.0 Hardware Installation and Operating Manual Preface, Contents Product Overview 1 Installing the CPU 41x-2 PCI 2 Getting Started 3 Controller Operations
STEP 7 Professional 2010 SR2 Engineering Software for SIMATIC S7 / M7 / C7
SIMATIC STEP 7 Professional 2010 SR2 Engineering Software for SIMATIC S7 / M7 / C7 Notes on Installation and Usage These notes should be considered more up-to-date than the information in other documents.
DANGER indicates that death or severe personal injury will result if proper precautions are not taken.
SIMATIC Process Control System PCS 7 V7.0 SP1 SIMATIC Process Control System PCS 7 V7.0 SP1 Preface 1 PC components of a PCS 7 system 2 Hardware for PC stations 3 Installing PC stations 4 Appendix 5 Operating
TRAINING INDEX SIEMENS SIMATIC S7-200 S7-200 BASIC COURSE S7-200 ADVANCED COURSE SIEMENS SIMATIC S5 S5 STARTER S5 EXPERT
TRAINING INDEX SIEMENS SIMATIC S7-300/400 S7 BASIC COURSE S7 ADVANCED COURSE S7 ADVANCED DIAGNOSTICS S7 COMMUNICATION S7 ETHERNET S7 AS-I S7 OPC S7 PROFINET S7 LOOP CONTROL S7 GRAPH S7 SCL S7 DISTRIBUTED
SIMATIC NET. S7-CPs for PROFIBUS Configuring and Commissioning
SIMATIC NET S7-CPs for PROFIBUS Configuring and Commissioning Manual Part A General Application Preface, Contents Communication over S7-CPs 1 Characteristics of the PROFIBUS CPs 2 NCM S7 for PROFIBUS CPs
6ES7 313-6BE01-0AB0 6ES7 313-5BE01-0AB0
4 SIMATIC S7-300 Central processing units CPU 312C to CPU 317F-2 DP CPU 317F-2 DP The failsafe CPU with a large program memory and quantity framework for demanding applications For configuration of a failsaf
Validity 1. Improvements in STEP 7 2. Improvements in WinCC 3. Simatic. Readme. Readme
Validity 1 Improvements in STEP 7 2 Simatic Improvements in WinCC 3 2012 Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety,
Attention: The installation of the ABB Automation Builder software requires administrator rights.
***************************************************************** Welcome to ABB Automation Builder 1.0.2 ***************************************************************** This README file contains important
SIMATIC Software. SIMATIC Controller Software. Tools for configuring and programming SIMATIC Controllers. Brochure October 2009. Answers for industry.
SIMATIC Controller Software Tools for configuring and programming SIMATIC Controllers Brochure October 2009 SIMATIC Software Answers for industry. Totally Integrated Automation Rely on new productivity
SIMATIC S7-300, CPU 315-2DP CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 128 KBYTE WORKING MEMORY 2
6ES7315-2AG10-0AB0 Page 1 Product data sheet 6ES7315-2AG10-0AB0 SIMATIC S7-300, CPU 315-2DP CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 128 KBYTE WORKING MEMORY 2. INTERFACE DP-MASTER/SLAVE
Security basics and application SIMATIC NET. Industrial Ethernet Security Security basics and application. Preface. Introduction and basics
Preface Introduction and basics 1 SIMATIC NET Industrial Ethernet Security Configuration Manual Configuring with the Security Configuration Tool 2 Creating modules and setting network parameters 3 Configure
Service and Training. Practical know-how Straight from the manufacturer. Service & Training for Industry Automation and Drive Technologies
Practical know-how Straight from the manufacturer Service & Training for Industry Automation and Drive Technologies Service and Training Industry Automation and Drive Technologies Qualifications at first
s Preface SIMATIC Configuring Hardware and Communication Connections with STEP 7 Contents Basics of Configuring Hardware with STEP 7 1
s Preface SIMATIC Configuring Hardware and Communication Connections with STEP 7 Manual This manual is part of the documentation package with the order number: 6ES7810-4CA08-8BW0 Contents Basics of Configuring
Siemens AG 2013. 6/56 Digital modules 6/56 SM 421 digital input module 6/59 SM 422 digital output module
Siemens AG 2013 SIMATIC S7-400 /2 Introduction /4 Central processing units /4 Standard CPUs /4 CPU 412 /8 CPU 414 /13 CPU 41 /18 CPU 417 /21 SIPLUS Standard CPUs /21 SIPLUS CPU 412 /22 SIPLUS CPU 414 /23
Software. Process Device Manager SIMATIC PDM 8/11. Overview
Communication and Process Device Manager SIMATIC PDM Overview SIMATIC PCS 7 engineering station with SIMATIC PDM Device on the workbench Plant bus S7-400 S7-400 Stand-alone computer with SIMATIC PDM SITRANS
www.hurray.isep.ipp.pt Technical Report CDC PC Station Guide Tutorial Nuno Cruz
Technical Report CDC PC Station Guide Tutorial Nuno Cruz HURRAY-TR-A07006 Version: 1 Date: 5-3-2007 CDC PC Station Guide Nuno Cruz IPP-HURRAY! Polytechnic Institute of Porto (ISEP-IPP) Rua Dr. António
Automation License Manager
s Contents Product Overview 1 Installation 2 Working with the Automation License Manager 3 Glossary Manual Index 12/2008 A5E02389428-01 Legal information Warning notice system This manual contains notices
S7-1500/S7-1500F Technical Data
Standard CPUs CPU 1511-1 PN CPU 1513-1 PN CPU 1515-2 PN Type Standard CPU Standard CPU Standard CPU Dimensions 35 x 147 x 129 mm 35 x 147 x 129 mm 70 x 147 x 129 mm Spare part availability after 10 years
SIMATIC PDM software. Siemens FI 01 2001 7/1
software 7 Application...7/2 Graphical user interface...7/2 Communication...7/3 Diagnostics...7/4 Technical data...7/5 Ordering data...7/5 Siemens FI 01 2001 7/1 Application, graphical user interface Application
SIMATIC Expert Communication Connecting S7-400H to PC Station (WinCC)
SIMATIC Expert Communication Connecting S7-400H to PC Station (WinCC) Getting Started Edition 08/ 2001 Contents 1 Automation problem... 3 2 Solution description... 3 2.1 S7-400H... 3 2.2 S7-RedConnect...
How-To-Do. Hardware Configuration SLIO CPU 014
How-To-Do Hardware Configuration SLIO CPU 014 With the SIMATIC Manager from the SIEMENS AG Content 1 General... 2 1.1 Information... 2 1.2 Reference... 2 2 Step by step Hardware Configuration... 3 2.1
SIMATIC NET PC Software V8.2 SIMATIC NET. PG/PC - Industrial Ethernet / PROFIBUS SIMATIC NET PC Software V8.2. Introduction 1
Introduction 1 Installation of the SIMATIC NET PC software products 2 SIMATIC NET PG/PC - Industrial Ethernet / PROFIBUS Installation Manual Installation and configuration with VMware vsphere 5.0 3 Installing
SIMATIC S7-300. 5/30 SIPLUS digital modules 5/30 SIPLUS SM 322 digital output module. 5/31 Analog modules 5/31 SM 331 analog input module
/2 Central processing units /2 Standard CPUs /2 CPU 312 /2 CPU 314 /2 CPU 31-2 DP /2 CPU 31-2 PN/DP /3 CPU 317-2 PN/DP /17 Fail-safe CPUs /17 CPU 31F-2 DP /17 CPU 31F-2 PN/DP /18 CPU 317F-2 PN/DP /30 SIPLUS
PROFINET IO Diagnostics 1
PROFINET IO is a very cost effective and reliable technology. However, extensive installations can have thousands of PROFINET IO devices operating on many networks. The reliable operation of these networks
Siemens AG 2013. 4/51 Software for energy management 4/52 SIMATIC B.Data 4/56 SIMATIC powerrate
/2 Introduction /5 HMI Software in the TIA Portal /6 SIMATIC WinCC (TIA Portal) Engineering /12 SIMATIC WinCC (TIA Portal) Runtime /1 WinCC Runtime Advanced /19 WinCC Runtime Professional /25 WinCC Runtime
Hardware and Software Requirements for Sage 50 v15 to v22
Hardware and Software Requirements for Sage 50 v15 to v22 Sage 50 Accounts v22 Note: The Sage Data Service has the same system requirements as Sage 50 Accounts v22. Note: For more information on support
Training Document for Comprehensive Automation Solutions Totally Integrated Automation (T I A) MODULE A5 Programming the CPU 314C-2DP
Training Document for Comprehensive Automation Solutions Totally Integrated Automation (T I A) MODULE T I A Training Document Page 1 of 25 Module This document has been written by Siemens AG for training
SIMATIC programming devices
Siemens AG 2015 /2 Programming devices /2 Field PG M4 /7 Accessories /7 External prommer /8 /8 SOFTNET for PROFIBUS /10 HARDNET-IE S7-REDCONNECT /11 SOFTNET for Industrial Ethernet /13 SOFTNET PN IO /15
DP Hi-Speed USB 4-Port PCIe Quick Installation Guide
Introduction DP Hi-Speed USB 4-Port PCIe Quick Installation Guide The DP Hi-Speed USB 4-Port PCIe adds 4 high-speed USB 2.0 ports to your system. Features and Benefits Compliant with USB specifications
FMAudit Agent Install Guide
FMAudit Agent - Optional deployment for local printer support FMAudit Agent is a software service used to add local printer support to FMAudit or third party supported applications. FMAudit Agent's unique
Training Document for Comprehensive Automation Solutions Totally Integrated Automation (T I A) MODUL E04
Training Document for Comprehensive Automation Solutions Totally Integrated Automation (T I A) MODUL PROFINET with IO Controller CPU 315F-2 PN/DP and IO Device ET 200S T I A Training Document Page 1 of
SIMATIC HMI IPC 477C 1/5. Copyright Siemens AG 2013
Product Data Sheet SIMATIC HMI IPC477C: The powerful embedded Panel PC maintenance-free with versatile configuration Embedded PC platform with extremely high industrial compatibility for demanding tasks
1 How configure S7 PLC in the configuration tool
Quick Start Rev Date File Name Industrial Ethernet communication with Siemens S7-300 and S7-400 PLCs 1.1 29/01/07 QuickStart_IndusEthernet comm with Siemens S7-300 and S7-400 PLC Description Product concerned:
INDUSTRIAL TF1: 16 keys with LED 6AV1 902-0AA00 KEYBOARDS TF2: 20 keys with LED 6AV1 902-0AB00 6AV3 017-1NE30-0AX0 6AV3 503-1DB10 6AV3 505-1FB12
Siemens SIMATIC S5 SYSTEMS FOR CONTROL AND MONITORING OPERATOR PANELS INDUSTRIAL TF1: 16 keys with LED 6AV1 902-0AA00 KEYBOARDS TF2: 20 keys with LED 6AV1 902-0AB00 TF3: 24 keys with LED 6AV1 902-0AC00
WinCC Runtime Professional Readme SIMATIC HMI. WinCC V11 SP1. Readme WinCC Runtime Professional. Special considerations for Windows 7.
WinCC Runtime Professional Readme SIMATIC HMI WinCC V11 SP1 Special considerations for Windows 7 1 Installation 2 Runtime 3 Options 4 HMI devices 5 Readme WinCC Runtime Professional System Manual Online
Applications & Tools. Configuration of Messages and Alarms in WinCC (TIA Portal) WinCC (TIA Portal) Application description December 2012
Cover Configuration of Messages and Alarms in WinCC (TIA Portal) WinCC (TIA Portal) Application description December 2012 Applications & Tools Answers for industry. Siemens Industry Online Support This
Siemens AG 2012. The SIMATIC PCS 7 Process Control System. Brochure February 2012 SIMATIC PCS 7. Answers for industry.
The SIMATIC PCS 7 Process Control System Brochure February 2012 SIMATIC PCS 7 Answers for industry. Totally Integrated Automation As one of the leading international process control systems, SIMATIC PCS
New, ready to go and very simple! simotion easy set PACKAGING
New, ready to go and very simple! simotion easy set PACKAGING The first all-inclusive automation package for tubular bag and flow pack machines From now on, automating your vertical and horizontal tubular
CP 342-5. Page 1342 Mar 2008 Siemens ITS
CP 342-5 Function The CP 342-5 provides access to different communication services of the PROFIBUS bus system: PROFIBUS DP (according to IEC 61158/61784, master or slave) PG/OP communication S7 communication
Training Cases. 2 Important information 2 Preliminary information 2 General safety information
2 Important information 2 Preliminary information 2 General safety information 3 SIMATIC 3 SIMATIC S7 Training Case S7-300 TIA 3 SIMATIC S7 Training Case S7-1500 4 SIMATIC S7 Training Case S7-1200 4 SIMATIC
SIMATIC PCS 7. Performance you trust. What is new with SIMATIC PCS 7? Version 8.0 SP1 and more March 2013
SIMATIC PCS 7 Performance you trust What is new with SIMATIC PCS 7? Version 8.0 SP1 and more March 2013 SIMATIC PCS 7 Overview Technologies PCS 7 Upgrades & Migration Life Cycle & Remote Services Integrated
Bosch Recording Station. Release Notes
Recipient Cc RSOs, BU CCTV, Tech support, BRS customers Bosch Recording Station Version 8.9 Release Notes Overview 1 New software features in BRS 8.9...2 2 Fixed defects / resolved customer complaints...4
SIMATIC S7-200. SIMATIC Controller. Control technology a class of its own. Answers for industry.
SIMATIC S7-200 Control technology a class of its own SIMATIC Controller Answers for industry. Communicative, modular, compact: So small and so powerful The Micro PLC SIMATIC S7-200 is truly in a class
Cover sheet. How do you create a backup of the OS systems during operation? SIMATIC PCS 7. FAQ November 2013. Service & Support. Answers for industry.
Cover sheet How do you create a backup of the OS systems during operation? SIMATIC PCS 7 FAQ November 2013 Service & Support Answers for industry. Question This entry originates from the Service & Support
The CP 342-5 provides access to different communication services of the PROFIBUS bus system:
SIPLUS CP 342-5 Function The CP 342-5 provides access to different communication services of the PROFIBUS bus system: PROFIBUS DP (according to IEC 61158/61784, master or slave) PG/OP communication S7
PLC: SIMATIC S7-1500 più TIA Portal V12 SP 1
Nr. 2013/1.10/32 Data: 26.07.13 PLC: SIMATIC S7-1500 più TIA Portal V12 SP 1 Il TIA Portal V12 Service Pack 1 è rilasciato e pronto per fare un download (Le informazioni esistono ancora solo in tedesco)
Appendix F: Instructions for Downloading Microsoft Access Runtime
Appendix F: Instructions for Downloading Microsoft Access Runtime The Consumer Products Reporting Tool is designed to work with Microsoft Access 2010 or later. For the best compatibility, please refer
System Manager 4.01.0169. Installation Guide
Issue 1.01 24 July 2008 CONTENTS Changes from Issue 1.00... 3 1 Introduction... 4 1.1 System Manager (software) What is it and what does it do?... 4 1.2 System Administrator (person)... 5 1.3 Voice Connector
SIMATIC NET. S7-CPs for Industrial Ethernet. CP 343-1 Lean. Manual Part B. Release 09/2009 C79000-G8976-C198-06
SIMATIC NET S7-CPs for Industrial Ethernet Manual Part B CP 343-1 Lean 6GK7 343 1CX10 0XE0 as of hardware version 2, as of firmware version V2.2 for SIMATIC S7 300 / C7 300 LEDs TP port: 2 x 8-pin RJ-45
GE Healthcare Life Sciences UNICORN 5.31. Administration and Technical Manual
GE Healthcare Life Sciences UNICORN 5.31 Administration and Technical Manual Table of Contents Table of Contents 1 Network setup... 1.1 Network terms and concepts... 1.2 Network environment... 1.3 UNICORN
Optical-Sensor Data Handling
Weatherford Reservoir Monitoring System Data Logger Platform Platform Operations Staff Shore Primary Data Flow Path, by SCADA Production Optimization Those who rely on data produced by in-well optical
The SIMATIC PCS 7 Process Control System
The SIMATIC PCS 7 Process Control System SIMATIC PCS 7 Brochure April 2013 Answers for industry. Totally Integrated Automation As one of the leading international process control systems, SIMATIC PCS 7
straton Universal control and strong connections. embedded field bus controller soft-plc scada logic
straton Universal control and strong connections. embedded field bus controller soft-plc scada logic SCADA Logic, Soft-PLC, embedded field bus controller: straton is the universal perfect solution, with
PROFINET IRT: Getting Started with The Siemens CPU 315 PLC
PROFINET IRT: Getting Started with The Siemens CPU 315 PLC AN-674 Application Note This document shows how to demonstrate a working design using the PROFINET isochronous real-time (IRT) device firmware.
SIMATIC NET. S7-CPs for Industrial Ethernet. CP 343-1 Lean. Manual Part B8. Version 1 or higher (Firmware Version V1.0) for SIMATIC S7-300 / C7-300
SIMATIC NET S7-CPs for Industrial Ethernet Manual Part B8 CP 343-1 Lean 6GK7 343-1CX00-0XE0 for SIMATIC S7-300 / C7-300 Version 1 or higher (Firmware Version V1.0) LED displays TP port: 8-pin RJ-45 jack
TECHNICAL NOTE TNOI34
TECHNICAL NOTE TNOI Title: Communication with Siemens S7-00 PLCs via Ethernet Product(s): G, MC, and DSP ABSTRACT Crimson.0 provides advanced Ethernet communication capabilities for Red Lion Products,
1 Parameterizing field devices
1 Parameterizing field devices 1.1 Introduction to PDM 1.1.1 What is PDM? SIMATIC PDM is a software package for configuring, parameterizing, commissioning, diagnostics and maintenance of devices (e.g.
You were seeking a protocol translator. Eaton delivered a vital data flow processor.
You were seeking a protocol translator. Eaton delivered a vital data flow processor. Your power system is a critical, integral part your organization s technological infrastructure. Ensuring availability,
Andover Continuum CyberStation & web.client v1.92
Andover Continuum CyberStation & web.client v1.92 Product Overview Schneider Electric announces the release of Andover Continuum v1.92 software! Version 1.92 includes video enhancements such as Sarix camera
SIMATIC The Process Device Manager Manual Edition 12/2004 A5E00325944-01
s SIMATIC Manual Preface, Contents Product Introduction and Installation 1 Starting SIMATIC PDM 2 Configuring Networks and Devices 3 SIMATIC PDM Integrated 4 Working with SIMATIC PDM 5 Loading of Data
SIMATIC NET. IE/PB Link Gateway Manual. Contents. Properties and Services. Compatibility with the Previous Product. Design How to Commission the IE/PB
SIMATIC NET IE/PB Link Gateway Manual 6GK1411 5AA00 Version 2 and higher (Firmware version V1.3 and higher) Contents Properties and Services 1 Compatibility with the Previous Product 2 Design How to Commission
ScanWin Installation and Windows 7-64 bit operating system
ScanWin Installation and Windows 7-64 bit operating system In order to run the ScanWin Pro install and program on Windows 7 64 bit operating system you need to install a Virtual PC and then install a valid,
AUSTRALIAN RAIL TRACK CORPORATION
AUSTRALIAN RAIL TRACK CORPORATION INFRASTRUCTURE, STRATEGY AND PERFORMANCE Engineering Standards and Documents The following recommendation, together with the attached supporting documentation, has been
S7-400H SIMATIC. Fault-tolerant systems S7-400H. Preface 1 Fault-tolerant automation systems. S7-400H setup options 3.
SIMATIC Fault-tolerant systems System Manual 12/2010 A5E00267695-07 Preface 1 Fault-tolerant automation systems 2 setup options 3 Getting Started 4 Assembly of a CPU 41x H 5 Special functions of a CPU