Degree Institution University Specialization. Name and address of the Employer Period Designation
|
|
- Heather Rhoda Woods
- 8 years ago
- Views:
Transcription
1 K.ANAND, M.E., (Ph.D) Assistant Professor Senior Grade, PSG College of Technology, Coimbatore Tamil Nadu, India Mobile: Academic Qualifications: Degree Institution University Specialization B.E Kongu Engineering College Anna University, Chennai Mechanical Engineering M.E PSG College of Technology Anna University, Coimbatore Production Engineering PhD(Pursuing) PSG College of Technology Anna University, Chennai Ultrasonic Welding 2. Work Experience: Name and address of the Employer Period Designation June 2015 till date Assistant Professor (Senior Grade) September 2010 May 2015 Assistant Professor June 2010 August 2010 Lecturer Avasarala Technologies Limited June 2007 March 2008 Graduate Engineer Trainee 3. Areas of Academic / Research Interest: 1. Ultrasonic Welding 2. Production Tool Design 4. Publications: (a) Journals (i) International : 01 (ii) National : Nil (b) Conferences (i) International : 03 (ii) National : 11 Page 1 of 5
2 5. List of Publications: International Journals: 1. S. Elangovan., K.Anand and K. Prakasan (2012), Parametric optimization of ultrasonic metal welding using response surface methodology and genetic algorithm, International Journal of Advanced Manufacturing Technology, Vol.63, pp International Conferences: 1. K.Anand, Optimization of Ultrasonic metal welding parameters using Genetic algorithm, proceedings of International Conference on Recent Trends in Mechanical Engineering, (ICRAME2010) Noorul Islam University, April S.Elangovan, K.Anand, K.Prakasan Parametric Optimization of Ultrasonic metal welding using Response surface methodology and genetic algorithm, proceedings of International Conference on Materials for the Future, (ICMF2011), Government Engineering College Trichur, Tirussur., February 23-25, M.Karthik, K.Anand, Implementation of Software for Electrode shape extraction used in Electric Discharge Machine process, proceedings of International Conference on Computational Intelligence & Advance Manufacturing Research, (ICCIAMR 2014), Vels University, Chennai., May 2-3, National Conferences: 1. K.Anand, S.Elangovan Optimization of Ultrasonic metal welding parameters using Genetic algorithm proceedings of National Conference on Product Design and Manufacturing (NCPDM 10), April C.Rathinasuriyan, K.Anand, Application of Artificial Neural Network for predicting weld strength in Ultrasonic metal welding proceedings of National Conference on Product Design and Manufacturing (NCPDM 12), April C.J.Anandhakumar, K.Anand, Application of Artificial Neural Network for Predicting weld strength in Friction Stir Welding proceedings of National Conference on Product Design and Manufacturing (NCPDM 12), April Poovannan.A, K.Anand, Optimization of Ultrasonic metal welding parameters for copper sheet to copper wire joints and Numerical Analysis of Ultrasonic wire bonding proceedings of National Conference on Product Design and Manufacturing (NCPDM 12), April Ranjith Raj.A, K.Anand, Integration of Analysis Data into Product Life Cycle Management proceedings of National Conference on Product Design and Manufacturing (NCPDM 13), April George Paul, K.Anand, Assessment and Implementation of Quality Management Maturity Model proceedings of National Conference on Product Design and Manufacturing (NCPDM 13), April Rajesh R, Anand.K, Design and Analysis of Lifting / Tailing Trunnion-Lug and Modularization of Reactor-Regenerator unit in Fluid Catalytic Cracker Unit proceedings Page 2 of 5
3 of National Conference on Product Design Virtual Prototyping and Manufacturing (NCPDVM 14), April Karthik.M, Anand.K, Extraction of Shape for Electrode used in Electric Discharge Machine Process proceedings of National Conference on Product Design Virtual Prototyping and Manufacturing (NCPDVM 14), April Premkumar.R, Anand.K, Optimization of Ultrasonic Inserting Process Parameters using RSM and Genetic Algoritham in ABS Specimen & Brass Insert proceedings of National Conference on Product Design Virtual Prototyping and Manufacturing (NCPDVM 14), April Balaji.V, Anand.K, Parametric Optimization of Ultrasonic Inserting using Response Surface Methodology and Genetic Algorithm proceedings of National Conference on Product Design Virtual Prototyping and Manufacturing (NCPDVM 14), April Mohanganesh.K, Anand.K, Investigation of Ultrasonic Inserting Process for Manufacturing Applications proceedings of National Conference on Product Design Virtual Prototyping and Manufacturing (NCPDVM 14), April Consultancy / Testing Activity: S.No Type of Consultancy/Testing Organisation/Client 1 Consultancy work on Ultrasonic welding and testing of copper to aluminium joints Mookambigai College of Engineering, Tiruchirappalli 2 Tensile testing of Fabric samples LBH Expansion Joints India Private Limited 3 Consultancy work on Ultrasonic welding and testing of aluminium to aluminium joints SNS College of Engineering, Coimbatore. 7. Workshops and Courses Organized: S.No Title of the course Detail Duration 1 Ultrasonic welding of plastics and metals One day workshop 28/01/ Theory of Constraints and its Thinking One Credit Course 3,10,17 - March & 7 April 2013 Process 8. Workshops and Training Programs Attended: S.No Title Duration Institute / Industry 1 A Modern Introduction to Geometric 02/12/2011 To PSG College of Technology, Coimbatore Dimensioning and Tolerancing 03/12/ Mathematics For Electrical 02/03/2012 To PSG College of Technology, Coimbatore And Mechanical Sciences 03/03/ TEQIP Sponsored FDP on 23/07/2013 To College of Engineering, Guindy Page 3 of 5
4 Engineering Graphics 27/07/2013 Anna University, Chennai. TEQIP Sponsored Research Workshop 24/08/2013 To on Ergonomics: Applications in 25/08/2013 Engineering and Industrial Design TEQIP Sponsored Research Seminar on Effective Teaching and Research 23/11/2013 TEQIP Sponsored FDP on Outcome Based Course Planning TEQIP Sponsored Research Workshop on Product Design & Development TEQIP Sponsored FDP on Product Development Strategies 13/12/2013 To 14/12/ /03/2014 To 30/03/ /05/2014 To 10/05/2014 Department of Mechanical Engineering, 9. Subjects Taught: 1. Advanced Welding and Casting 2. Design for Manufacture and Assembly 3. Logistics and Supply Chain Management 4. Manufacture of Automotive Components 5. Automobile Engineering 6. Rapid Prototyping 7. Dimensioning and Tolerancing Techniques 8. Tool Design 10. Project Guidance: Undergraduate level - 05 Postgraduate level Manuals Prepared: 1. Ultrasonic Metal Welding 2. Hydraulic press 3. Lapping 4. Honing 5. Surface grinding 6. Laser Engraving 7. Plastic Injection Molding 8. Subtractive Rapid Prototyping 9. Formability Testing 10. Tool Wear using Pin-On-Disc method 11. Tool and Cutter Grinder Page 4 of 5
5 12. Academic Responsibilities S.No Position held Details 1 Faculty Incharge Production Engineering Laboratory 2 Committee Member Department Time Table Committee 3 Tutor ME (PT) Production Engineering 2010 batch 4 Tutor ME (PT) Production Engineering 2013 batch 5 Tutor ME (PT) Production Engineering 2015 batch Page 5 of 5
Curriculum Vitae Nouby Mahdy Ghazaly, Ph.D.
Contact details: Automotive and Tractor Engineering Dept. College of Engineering, Minia University El-Minia - 61111 Egypt Nationality: Egyptian Curriculum Vitae Nouby Mahdy Ghazaly, Ph.D. Mobile No.: +201128930300
More informationEngineering Graduate Training Scheme "A" Manufacturing & Industrial Engineering. Model Training Guide
Engineering Graduate Training Scheme "A" Manufacturing & Industrial Engineering Model Training Guide 1 Model Training Guide (MTG) The Model Training Guide is, as the name suggests, a guide to Companies
More informationGEORGIAN COLLEGE. Mechanical Engineering Technology Automotive Products Design
Courses Required Mandatory GEORGIAN COLLEGE Mechanical Engineering Technology Automotive Products Design ADPE2000 Product Design Fundamentals ADPE2001 Virtual Prototyping ADPE3000 Advanced Product Design
More informationMANUFACTURING THE FUTURE
Paul Miller 803-554-3590 paul.miller@3dsystems.com MANUFACTURING THE FUTURE PAUL MILLER DIRECTOR OF SALES WWW.3DSYSTEMS.COM NYSE:DDD 2013 3DSYSTEMS A 3D PRINTER FOR YOU RESULTING IN UNMATCHED 3D PRINTER
More informationCURRICULUM UNDERGRADUATE STUDY PROGRAM OF MECHANICAL ENGINEERING
CURRICULUM UNDERGRADUATE STUDY PROGRAM OF MECHANICAL ENGINEERING FACULTY OF MECHANICAL ENGINEERING AND COMPUTING Students at the Faculty of Mechanical engineering and computing University of Mostar are
More informationCIRP Encyclopedia of Production Engineering
The International Academy for Production Engineering Luc Laperriere Gunther Reinhart Editors CIRP Encyclopedia of Production Engineering Volume 1 A-H With 1145 Figures and 85 Tables ^ Springer Reference
More informationWelding of Plastics. Amit Mukund Joshi. (B.E Mechanical, A.M.I.Prod.E)
Welding of Plastics Amit Mukund Joshi (B.E Mechanical, A.M.I.Prod.E) Introduction Mechanical fasteners, adhesives, and welding processes can all be employed to form joints between engineering plastics.
More informationDepartment of Mechanical Engineering
About The Department The at BITS-Pilani is one of the premier departments in the institute that provides a unique educational and research environment. Its various Bachelor s, Master s and Doctoral Programs
More informationInternational Journal of Advanced Engineering Research and Studies E-ISSN2249 8974
Research Article EXPERIMENTAL INVESTIGATIONS ON OPTIMIZATION OF ULTRASONIC WELDING PARAMETERS FOR COPPER TO BRASS JOINTS USING RESPONSE SURFACE METHOD AND GENETIC ALGORITHM S Elangovan 1 *, S Venkateshwaran,
More informationRapid Prototyping and Fabrication
Rapid Prototyping and Fabrication New York City Facilities RAPID PROTOTYPING AND FABRICATION (RPF) is an emerging industry that is bringing New York City s culture of innovation and experimentation into
More informationAutomotive Manufacturing Technology
76 Location: Patterson Campus - Bldg. Q Program Information is a rapidly growing career in one of Alabama s highest-growth industries, automotive manufacturing. With high demand for skilled workers in
More informationSeeliyur (VIA) Coimbatore 641 113 Mobile: 98420 60673 Coimbatore 641 004, India. Email: parameshmsw@yahoo.co.in parameshmsw@gmail.
Dr. S. PARAMESVARAN 3/120B, Salaivembu, Medur (PO) Seeliyur (VIA) Coimbatore 641 113 Mobile: 98420 60673 Coimbatore 641 004, India. Email: parameshmsw@yahoo.co.in parameshmsw@gmail.com Summary of Qualifications
More informationGRCC Manufacturing Technology
Grand Rapids Community College GRCC Manufacturing Technology Plastics Manufacturing Quality Science Tooling and Manufacturing Welding 1 www.grcc.edu G r a n d R a p i d s C o m m u n i t y C o l l e g
More informationIndustrial & Manufacturing Engineering Department
428 2011-13 Cal Poly Catalog Industrial & Manufacturing Engineering Department IME INDUSTRIAL and MANUFACTURING ENGINEERING IME 101 Introduction to Industrial and Manufacturing Engineering (1) Introduction
More informationPROVIDING TECHNICAL SOLUTIONS FOR BIOLOGICAL PROCESSES AND MEDICAL DEVICES
PROVIDING TECHNICAL SOLUTIONS FOR BIOLOGICAL PROCESSES AND MEDICAL DEVICES ABOUT LIFE SCIENCES ENGINEERING The joint Life Sciences Engineering business unit of Fraunhofer IPT and CMI has offices in Boston,
More informationFoundation Year for Engineering, Physics and Geophysics. Faculty of Engineering, Science and Mathematics
Foundation Year for Engineering, Physics and Geophysics Faculty of Engineering, Science and Mathematics Development of electronic technology Who is the course for? The Foundation Year is the first year
More informationDESIGNING AN EDUCATIONAL CERTIFICATION SYSTEM FOR EUROPEAN PRODUCTION ENGINEERS. Ove Bayard(I), Cornel Mihai Nicolescu(I) and Magnus Areskoug (II)
DESIGNING AN EDUCATIONAL CERTIFICATION SYSTEM FOR EUROPEAN PRODUCTION ENGINEERS Ove Bayard(I), Cornel Mihai Nicolescu(I) and Magnus Areskoug (II) (I) Kungliga Tekniska Högskolan, Dept. of Production Engineering,
More informationDesign. Design. Certificates. Contact Information. Full-Time Faculty. Associate Degrees. Associate in Arts Degrees. Certificate of Achievement
Design Associate in Arts Degrees Architectural Design Computer-Aided Drafting Computer-Aided Drafting and Design Mechanical Design Students may earn one of the above-named associate degrees by completing
More informationCore Curriculum to the Course:
Core Curriculum to the Course: Environmental Science Law Economy for Engineering Accounting for Engineering Production System Planning and Analysis Electric Circuits Logic Circuits Methods for Electric
More informationDesign & Drafting Services
Design & Drafting Services 1. Mechanical CAD Services 1. Mechanical CAD Services Mechanical Design Services: Custom machine design Packaging machine design Mechanism design Machine tool design Material
More informationNingbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes,
Ningbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes, STEREOLITHOGRAPHY (SLA) Selective Laser Sintering (SLS) RTV MOLDING AND CAST URETHANE PROTOTYPES Tel : +86 574
More informationWORLDWIDE AUSTRIAN CABLE SYSTEMS
WORLDWIDE AUSTRIAN POWER WWW.EGSTON.COM WORLDWIDE AUSTRIAN CABLE SYSTEMS ENGLISH WORLDWIDE AUSTRIAN POWER ONLY THE BEST EXPERIENCES EGSTON CABLE SYSTEMS YOU HAVE AN IDEA, WE WRAP IT AND FILL IT, SO THAT
More informationCOMPANY OVERVIEW. International Sourcing Tooling Management Design & Product Engineering Rapid Prototyping Supply Chain Management
COMPANY OVERVIEW COMPANY OVERVIEW SINO INTERNATIONAL PRODUCTS import, manufacture, assemble and supply components to the automotive, rail and other industrial sectors Warwick Office United Kingdom Shanghai
More informationCAD and Creativity. Contents
CAD and Creativity K C Hui Department of Automation and Computer- Aided Engineering Contents Various aspects of CAD CAD training in the university and the industry Conveying fundamental concepts in CAD
More informationMechanical Engineering Technologies
Technologies 1 Technologies Graduates of the Technology program are prepared to design mechanical systems, operate CAD systems, manage design projects, and perform product testing. Examples of graduate
More informationAPPLICATION OF DUAL RESPONSE AND TOLERANCE ANALYSIS APPROACHES FOR ROBUST DESIGN OF SPOT WELDING PROCESS
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 1, Jan-Feb 2016, pp. 05-10, Article ID: IJMET_07_01_002 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=1
More informationChapter 31. Solid-State Welding Processes
Chapter 31 Solid-State Welding Processes Roll Bonding Figure 31.1 Schematic illustration of the roll bonding or cladding process. Ultrasonic Welding Figure 31.2 (a) Components of an ultrasonic welding
More informationIntroducing Fundamental Manufacturing Processes and Manufacturing Organizational and Production Systems by Way of Laboratory Activities
Session 2263 Introducing Fundamental Manufacturing Processes and Manufacturing Organizational and Production Systems by Way of Laboratory Activities Harry Hess, Norman Asper and Joseph Flynn Trenton State
More informationInnovation From Concept to Production
Industrial Design Product Development Rapid Prototypes 3D Mold Design Short Run Production Legacy Data Translation Paradigm Engineering, Inc. is built on a foundation of innovation. Our unique expertise
More informationPredictive Analytics using Genetic Algorithm for Efficient Supply Chain Inventory Optimization
182 IJCSNS International Journal of Computer Science and Network Security, VOL.10 No.3, March 2010 Predictive Analytics using Genetic Algorithm for Efficient Supply Chain Inventory Optimization P.Radhakrishnan
More informationLevel 6 Graduate Diploma in Business Management & Strategy
Level 6 Graduate Diploma in Business Management & Strategy & Level 6 Integrated Graduate Diploma in BMS Detailed Specification Level 6 BIRD L6 Graduate Diploma in Business Management & Strategy/Specification
More informationVerification Experiment on Cooling and Deformation Effects of Automatically Designed Cooling Channels for Block Laminated Molds
International Journal of Engineering and Advanced Technology (IJEAT ISSN: 2249 8958 Volume-4 Issue-5 June 2015 Verification Experiment on Cooling and Deformation Effects of Automatically Designed Cooling
More informationENGINEERING AND TECHNOLOGY EDUCATION DEPARTMENT
ENGINEERING AND TECHNOLOGY EDUCATION DEPARTMENT Advanced Manufacturing I 5608 TEH600, TEH601 Grades 10-12 Dual credit through Ivy Tech Recommended Prerequisite: Introduction to Advanced Manufacturing and
More informationEDUCATION PHD RESEARCH ABSTRACT
Pramod S L PhD Research Scholar, Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, India. Mobile: +91-9787174959 E mail: slpramod@gmail.com Webpage: https://sites.google.com/site/slpramod
More informationYOUR LOCAL SOURCE IN A GLOBAL WORLD YOUR SUPPLIER OF METAL COMPONENTS
YOUR LOCAL SOURCE IN A GLOBAL WORLD YOUR SUPPLIER OF METAL COMPONENTS CASTINGS WELDING FORGINGS CNC PLATE MACHINING CASTINGS WELDING There are many obvious benefits for you by choosing to use castings.
More informationWelding & Fabrication. School of Mechanical & Environmental Engineering
Welding & Fabrication School of Mechanical & Environmental Engineering Your Local College The facts 14,000 students meet new people 3 Centres all easy to access Hundreds of courses something for everyone
More informationHEALTHCARE Single - Use Systems CONTRACT MANUFACTURING SOLUTIONS PARTNER
HEALTHCARE Single - Use Systems CONTRACT MANUFACTURING SOLUTIONS PARTNER ASI (A Part of Thermo Fisher Scientific) is dedicated to providing innovative and cost effective solutions to the Life Sciences
More informationMEM23131A Evaluate rapid prototyping applications
MEM23131A Evaluate rapid prototyping applications Release: 1 MEM23131A Evaluate rapid prototyping applications Modification History Release 1 (MEM05v9). Unit Descriptor This unit of competency covers the
More informationDIGITAL DESIGN & FABRICATION LAB School of Architecture, AUTh REGULATIONS AND TERMS OF USE 2013-14. 1. Title and Subject of the Lab
DIGITAL DESIGN & FABRICATION LAB School of Architecture, AUTh REGULATIONS AND TERMS OF USE 2013-14 1. Title and Subject of the Lab The Digital Design & Fabrication Lab provides 3D printing and rapid prototyping
More informationWeighted Graph Approach for Trust Reputation Management
Weighted Graph Approach for Reputation Management K.Thiagarajan, A.Raghunathan, Ponnammal Natarajan, G.Poonkuzhali and Prashant Ranjan Abstract In this paper, a two way approach of developing trust between
More informationCOMPUTER SCIENCE PROGRAM
COMPUTER SCIENCE PROGRAM Master of Science in Computer Science (M.S.C.S.) Degree DEGREE INFORMATION CONTACT INFORMATION Program Admission Deadlines: Fall: June 1February 15 Spring: October 15 Summer: No
More informationCAD / CAM Dr. P. V. Madhusuthan Rao Department of Mechanical Engineering Indian Institute of Technology, Delhi Lecture No. # 12 Reverse Engineering
CAD / CAM Dr. P. V. Madhusuthan Rao Department of Mechanical Engineering Indian Institute of Technology, Delhi Lecture No. # 12 Reverse Engineering So what we will do in today s lecture is basically take
More information1.. Warm Welcome.. To
1.. Warm Welcome.. To WHO WE ARE 2 The International Leader in Production of Industrial Components & Parts (Metal and Plastic) The Global OEM (Original Equipment Manufacturer) for Air Conditioners, Freezers,
More informationEducation. i. Ph.D. (Finance) :
Dr. Lellapalli Venkata Ramana (Dr. L V Ramana ) Associate Professor Finance and Accounting Area Indian Institute of Management Indore Pigdamber, Rau Indore 453 331 INDIA Education i. Ph.D. (Finance) :
More informationPartnering In Growth Strategy
Partnering In Growth Strategy India On New Growth Cycle! India's economy is now beginning to recover and is expected to grow in the coming years. With new government coming in control with favorable policies
More informationManufacturing process
Manufacturing process What is Manufacturing Process? A sequence of operations, often done on a machine or at a given area. Examples: welding, casting, cutting, assembling, etc. During a manufacturing process,
More informationجامعة البلقاء التطبيقية
AlBalqa Applied University تا سست عام 997 The curriculum of associate degree in Air Conditioning, Refrigeration and Heating Systems consists of (7 credit hours) as follows: Serial No. Requirements First
More informationHow To Get A Degree In Telecommunications In Mauritius
MSc Telecommunications Management 1. Introduction There is an increasing demand for telecommunications engineers who combine a Master s level of theoretical and operational understanding with the flexibility
More informationÇANKAYA UNIVERSITY Faculty of Engineering and Architecture
ÇANKAYA UNIVERSITY Faculty of Engineering and Architecture Course Definition Form This form should be used for both a new elective or compulsory course being proposed and curricula development processes
More informationMechanical Engineering PhD / MASc / MEng
Mechanical Engineering PhD / MASc / MEng School of Graduate Studies w w w.r yerson.ca/graduate Mechanical Engineering PhD / MASc / MEng School of Graduate Studies w w w.r yerson.ca/graduate ii Ryerson
More informationGREY RELATIONAL ANALYSIS TO OPTIMIZE WELDING PARAMETERS FOR DISSIMILAR SHEETS OF MATERIAL IN RESISTANCE SPOT WELDING
International Journal of Mechanical Engineering and Technology (IJMET) Volume 6, Issue 11, Nov 2015, pp. 23-32, Article ID: IJMET_06_11_003 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=6&itype=11
More informationRULE-BASE DATA MINING SYSTEMS FOR
RULE-BASE DATA MINING SYSTEMS FOR CUSTOMER QUERIES A.Kaleeswaran 1, V.Ramasamy 2 Assistant Professor 1&2 Park College of Engineering and Technology, Coimbatore, Tamil Nadu, India. 1&2 Abstract: The main
More informationDecision Support System for Rapid Prototyping Process Selection
International Journal of Scientific and Research Publications, Volume 4, Issue 1, January 2014 1 Decision Support System for Rapid Prototyping Process Selection Vikram Shende*, Dr. Prafulla Kulkarni**
More informationNumerical Analysis of Independent Wire Strand Core (IWSC) Wire Rope
Numerical Analysis of Independent Wire Strand Core (IWSC) Wire Rope Rakesh Sidharthan 1 Gnanavel B K 2 Assistant professor Mechanical, Department Professor, Mechanical Department, Gojan engineering college,
More informationAC 2007-1210: DEVELOPMENT OF A INDUSTRY-DRIVEN ASSOCIATE DEGREE IN PRECISION MANUFACTURING TECHNOLOGY
AC 2007-1210: DEVELOPMENT OF A INDUSTRY-DRIVEN ASSOCIATE DEGREE IN PRECISION MANUFACTURING TECHNOLOGY Robert Walters, Pennsylvania State University Prasad Marugabandhu, MAGLEV, Inc. Bryan Bond, MAGLEV,
More informationME 521 Computer Aided Design. 1. Introduction to CAD
Computer Aided Design Yrd.Doç. e mail: azsenalp@gyte.edu.tr Makine Mühendisliği Bölümü Gebze Yüksek Teknoloji Enstitüsü Basic Definitions CAD: Computer Aided Design is the use of computer technology for
More informationIndustries Serviced. - Health Care (External Appeals: medical necessity, coverage review & ADR)
Industries Serviced Service Type Industries: Human Resource - Payroll (electronic recruiting, via the internet, workers compensation and unemployment claim management, full banking services, integrated
More informationPSG COLLEGE OF TECHNOLOGY, COIMBATORE - 641 004 (Autonomous college affiliated to Anna University, Chennai)
PSG COLLEGE OF TECHNOLOGY, COIMBATORE - 641 004 (Autonomous college affiliated to Anna University, Chennai) 2013 REGULATIONS OF ME/ MTech DEGREE PROGRAMMES (For the batches of students admitted in 2013-2014
More informationDoctor of Philosophy in Systems Engineering
Doctor of Philosophy in Systems Engineering Coordinator Michael P. Polis Program description The Doctor of Philosophy in systems engineering degree program is designed for students who plan careers in
More informationDRAFTING AND DESIGN. For additional program information see: http://www.hillcollege.edu/students/teched/drafting/.
DRAFTING AND DESIGN For additional program information see: http://www.hillcollege.edu/students/teched/drafting/. Certificate of Completion in Basic Computer Aided Drafting Major Code: 6055 TSI (Testing)
More informationLiving perfection. WBA Aachener. Werkzeugbau Akademie. Aachen, 2016. Slide 1
Living perfection WBA Aachener Werkzeugbau Akademie GmbH Aachen, 2016 Slide 1 The Aachener Werkzeugbau Akademie Tooling competence from Aachen University and research institutes in Aachen Focus Production
More informationPROGRAMME SPECIFICATION POSTGRADUATE PROGRAMME
PROGRAMME SPECIFICATION POSTGRADUATE PROGRAMME KEY FACTS Programme name Advanced Computer Science Award MSc School Mathematics, Computer Science and Engineering Department or equivalent Department of Computing
More informationProduct-group categories
Product-group categories 1. Development 1.1 Development and design 1.2 IT systems/software 1.3 Model making and prototyping 1.4 Tooling and mold making 1.5 Tools 1.6 Semi-finished goods, materials 1.7
More informationME 612 Metal Forming and Theory of Plasticity. 1. Introduction
Metal Forming and Theory of Plasticity Yrd.Doç. e mail: azsenalp@gyte.edu.tr Makine Mühendisliği Bölümü Gebze Yüksek Teknoloji Enstitüsü In general, it is possible to evaluate metal forming operations
More informationRAPID PROTOTYPING. Learning Objectives: By the end of the lecture the student should be able to: Explain the fundamentals of Rapid Prototyping
RAPID PROTOTYPING Learning Objectives: By the end of the lecture the student should be able to: Explain the fundamentals of Rapid Prototyping Outline and explain differences of Rapid Prototyping Technologies
More informationMANUFACTURING SOLUTIONS
MANUFACTURING SOLUTIONS REAL-WORLD SOLUTIONS FROM INNOVATIVE PEOPLE NAIT Shell Manufacturing Centre Our innovative facility, believed to be the first of its kind in Canada, offers a unique combination:
More informationLIVERPOOL HOPE UNIVERSITY FACULTY OF SCIENCE COMPUTER SCIENCE YOUR FUTURE STARTS WITH HOPE
LIVERPOOL HOPE UNIVERSITY FACULTY OF SCIENCE COMPUTER SCIENCE YOUR FUTURE STARTS WITH HOPE 021015 Computer Science Fact File Faculty: Science Department: Mathematics and Computer Science Campus Location:
More informationThe creation of tooling using the selective laser sintering process. Scott Schermer S.C. Johnson
The creation of tooling using the selective laser sintering process Scott Schermer S.C. Johnson 1 TOOLING utilizing traditional rapid prototyping machines to produce metal inserts. 2 LaserForm ST-100?
More informationBUFFALO MANUFACTURING WORKS. Gardner Carrick Vice President The Manufacturing Institute
BUFFALO MANUFACTURING WORKS Gardner Carrick Vice President The Manufacturing Institute 2 The Manufacturing Institute is the authority on the attraction, qualification, and development of worldclass manufacturing
More informationChoosing optimal rapid manufacturing process for thin-walled products using expert algorithm
Choosing optimal rapid manufacturing process for thin-walled products using expert algorithm Filip Górski, Wiesław Kuczko, Radosław Wichniarek, Adam Dudziak, Maciej Kowalski, Przemysław Zawadzki Poznan
More informationMoi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified)
Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) 272 School of Engiineering Contact: The Dean, School of Engineering Moi University P.O. Box 3900 30100, Eldoret, Kenya Tel: (053) 43170;
More informationTechnical University of Mombasa
Technical University of Mombasa ADVERTISEMENT FOR JOB OPPORTUNITIES INSTITUTIONAL PROFILE The Technical University of Mombasa (TUM) is a Public University, set along the expansive shores of the beautiful
More informationTool Design and Concurrent Engineering using Rapid Tooling Construction Methods
Section Number 3563 Tool Design and Concurrent Engineering using Rapid Tooling Construction Methods Nicole Hoekstra Engineering Technology Department Western Washington University Abstract Prior to rapid
More informationHow To Model Space Frame Structure In Cad 3D Software
PARAMETRIC MODELING OF SPACE FRAME STRUCTURES STUDY OF COMPARISON BETWEEN TWO METHODS EMPLOYING TWO DIFFERENT SOFTWARE TOOLS: CATIA V5 DSS and GRASSHOPPER PLUGIN 1/16 TABLE OF CONTENTS - BIM and parametric
More informationINDIAN STANDARDS (BIS) ON WELDING
** IS 82:957 Glossary of terms relating to welding and cutting of Sep 2008 metals 2 IS 83:986 Scheme of symbols for welding (revised) Sep 2008 3 IS 84:2004 Covered electrodes for manual metal arc welding
More informationTABLE 1A. Educ ation and Wage s Group: Machine Technology Region: Southwest Minnesota
TABLE 1A. Educ ation and Wage s Group: Machine Technology Education Level Median Wage Computer Numerically Controlled Machine Tool Programmers, High school diploma or equivalent $21.40 Metal and Plastic
More informationWinchester College Design Technology
Winchester College Design Technology The Staff Simon Tarrant Head of Department David Yeomans Adrian Ahmed Trevor Ward Harley Zblewski Our Philosophy Key words teach Inspire Independent learning relevant
More informationCustomer Services. More Value
Customer Services More Value < Contents 3 Levels of Operations Machine Business GF AgieCharmilles 4-5 6-7 10-11 12-13 14 CUSTOMER SERVICES more VALUE OPERATIONS SUPPORT MACHINE SUPPORT BUSINESS SUPPORT
More informationGURU NANAK DEV ENGINEERING COLLEGE, LUDHIANA DEPARTMENT OF MECHANICAL ENGINEERING
Books/ Monographs Published by ISBN / Co- 1 Vikas Chawla Lakhwinder Sigh Grewal Wear Behaviour:Some detonation gun sprayed coatings on grey cast iron 978-3-8465-8118-6 Co- LAP LAMBERT 2 Shivali Singla
More informationCOURSE CATALOGUE (ECTS INFORMATION PACKAGE) FIELD MANAGEMENT AND PRODUCTION ENGINEERING FIRST-CYCLE STUDIES
COURSE CATALOGUE ( INFORMATION PACKAGE) FIELD MANAGEMENT AND PRODUCTION ENGINEERING FIRST-CYCLE STUDIES Legnica 2011/2012 Field: Management and Production Engineering, first-cycle studies The graduate
More informationADVANCED LOCAL PREDICTORS FOR SHORT TERM ELECTRIC LOAD
RESUME Ehab E. Elattar Assistant Professor Department of Electrical Engineering, college of Engineering Taif University, Taif, Kingdom of Saudi Arabia Phone: (+966) 549394587 (Mobile) E-mail: dr.elattar10@yahoo.com
More informationICSES Journal on Image Processing and Pattern Recognition (IJIPPR), Aug. 2015, Vol. 1, No. 1
2 ICSES Journal on Image Processing and Pattern Recognition (IJIPPR), Aug. 2015, Vol. 1, No. 1 1. About ICSES Journal on Image Processing and Pattern Recognition (IJIPPR) The ICSES Journal on Image Processing
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ADVANCED CNC MACHINING MET 2740
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ADVANCED CNC MACHINING MET 2740 Class Hours: 0.0 Credit Hours: 2.0 Laboratory Hours: 6.0 Revised: Fall 06 Catalog Course Description: Advanced
More informationIntroduction to the Design Process
Introduction to the Design Process Accreditation Board for Engineering and Technology (ABET) Definition of Design Engineering design is the process of devising a system, component, or process to meet desired
More informationIntegrative Optimization of injection-molded plastic parts. Multidisciplinary Shape Optimization including process induced properties
Integrative Optimization of injection-molded plastic parts Multidisciplinary Shape Optimization including process induced properties Summary: Andreas Wüst, Torsten Hensel, Dirk Jansen BASF SE E-KTE/ES
More informationManufacturing Careers
Manufacturing Careers www.nwtc.edu AFFORDABLE EDUCATION FOR HIGH TECH CAREERS Programs Make things better. Today s advanced manufacturing industry needs highly skilled employees in every area from developing
More informationTRANSPORTATION MANUFACTURING CAREER PATHWAY
TRANSPORTATION MANUFACTURING CAREER PATHWAY The work of the Talent Pipeline Task Force was inspired by our community s existing assets in the areas of education and workforce. Members consist of a diverse
More informationOn the Influence of Stator Slot shape on the Energy Conservation Associated with the Submersible Induction Motors
American Journal of Applied Sciences 8 (4): 393-399, 2011 ISSN 1546-9239 2010 Science Publications On the Influence of Stator Slot shape on the Energy Conservation Associated with the Submersible Induction
More informationPARAMETER OPTIMIZATION IN VERTICAL MACHINING CENTER CNC FOR EN45 (STEEL ALLOY) USING RESPONSE SURFACE METHODOLOGY
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 2, March-April 2016, pp. 288 299, Article ID: IJMET_07_02_031 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=2
More informationTAMIL NADU OPEN UNIVERSITY
TAMIL NADU OPEN UNIVERSITY No. 577, Anna Salai, Saidapet, Chennai 600 015. Phone: (91-44) 2430 6645 / 6600 Fax: (91-44) 2430 6640 email : registrar@tnou.ac.in ; website : www.tnou.ac.in Applications are
More informationMiami, Florida USA - Juarez, Mexico Toll free: 866.299.3361 Website: www.controlandautomation.com
Miami, Florida USA - Juarez, Mexico Toll free: 866.299.3361 Website: www.controlandautomation.com About Us! Control & Automation Companies brings over 15 years of expertise in system integration, lean
More informationLevel 5 Advanced Diploma in Business Management and Strategy;
Level 5 Advanced Diploma in Business Management and Strategy; Level 5 Integrated Advanced Diploma in BMS Detailed Specification Level 5 BIRD L5 Advanced Diploma in Business Management & Strategy/Specification
More informationT.R. DOĞUŞ UNIVERSITY ASSOCIATE DEGREE/UNDERGRADUATE EDUCATION INTERNSHIP DIRECTIVE
T.R. DOĞUŞ UNIVERSITY ASSOCIATE DEGREE/UNDERGRADUATE EDUCATION INTERNSHIP DIRECTIVE (Accepted by the University Senate in the meeting dated 20.11.2008 and no. 2008/20, approved in the meeting of Board
More informationINDUSTRIAL TECHNOLOGY EDUCATION
INDUSTRIAL TECHNOLOGY EDUCATION All students can benefit from study in an area of Industrial Technology. Classes can bring satisfying and worthy utilization of leisure and hobby time. Beyond this, many
More informationLKL Staal BV Specialized in customer specific metallurgical components
LKL Staal BV Specialized in customer specific metallurgical components WHAT IF YOU COULD COMBINE LOW-COST PRODUCTION WITH WESTERN QUALITY STANDARDS... WWW.LKLSTAAL.COM LKL STAAL DELIVERS Castings - Investment
More informationUndergraduate education part of the development plan of KTH CSC June 2008
Undergraduate education part of the development plan of KTH CSC June 2008 Programmes The aim of the Master of Science in Engineering program in Computer Science and Engineering is to give graduate engineers
More informationADMISSION TO PG (MBA / MCA / M.E. / M.TECH. / M.ARCH. / M.PLAN) DEGREE COURSES 2014-2015
DEPARTMENT OF TECHNICAL EDUCATION : CHENNAI 600 025 ADMISSION TO PG (MBA / MCA / M.E. / M.TECH. / M.ARCH. / M.PLAN) DEGREE COURSES 2014-2015 ELIGIBLE QUALIFICATION(S) FOR PG DEGREE COURSES PRESCRIBED BY
More informationThese regulations apply to students admitted to the BBA(IS) degree in the academic year 2005-2006 and thereafter.
764 REGULATIONS FOR THE DEGREE OF BACHELOR OF ENGINEERING (COMPUTER SCIENCE) (BEng[CS]) AWARDED IN CONJUNCTION WITH THE DEGREE OF BACHELOR OF BUSINESS ADMINISTRATION (INFORMATION SYSTEMS) (BBA[IS]) These
More information