Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified)

Transcription

1 Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) 272

2 School of Engiineering Contact: The Dean, School of Engineering Moi University P.O. Box , Eldoret, Kenya Tel: (053) 43170; Fax (053) SCHOOL OF ENGINEERING In t r o d u c t i o n The School of Engineering has five departments namely: Chemical and Process Engineering, Civil and Structural Engineering, Electrical & Communications Engineering, Mechanical and Production Engineering and Manufacturing, Industrial and Textile Engineering. The School offers six undergraduate engineering degree programmes. All the engineering programs have integrated Privately Sponsored Student Programs (PSSP) with the Government Sponsored Students (GSSP). This gives consistence in student evaluation and offers equal opportunities in the training process for all the students in our School hence ensuring high quality of training. The School programs consist of coursework, laboratories, workshops, projects, Industrial attachments and industrial visits. These components have enabled the School to produce highly qualified engineers for the country. The School of Engineering is very much committed to training of staff at all levels starting from the academic up to the junior staff through staff development funds and scholarships. All the academic staff are appraised annually as part of our strategy to maintain high standards in teaching and research. Through local and international collaborations the School has acquired various training and research facilities. This has further improved the quality of our training and research output. Vision Our vision is to be an internationally recognized centre of excellence in Engineering and Technology. Mission To endeavor to build engineering capacity for national development and wealth creation through training of highly skilled manpower in engineering, research, consultancy and extension services Ac a d e m i c Pr o g r a m m e s Undergraduate degree programmes There are six undergraduate programmes in the School leading to the award of the degrees of Bachelor of Engineering (B.Eng.) in the following disciplines: Chemical and Process Engineering Civil and Structural Engineering Electrical and Electronics Engineering Electrical and Telecommunications Engineering Mechanical and Production Engineering Industrial and Textile Engineering Postgraduate degree programmes. The School offers five Masters of Science (M.Sc.) two Master of Philosophy (MPhil.) and one Doctor of Philosophy (Ph.D) degree programmes: MSc. in Structural Engineering MSc. in Water Engineering MSc. in Chemical Engineering MSc. in Textile Engineering MSc. in Industrial Engineering MPhil. in Energy Studies MPhil. in Production Engineering DPhil. in Energy Studies 273

3 Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) Admission Requirements Bachelor of Engineering Programmes To be admitted to the degree programme of Bachelor of Engineering in the School of Engineering the candidate must satisfy the minimum entrance requirements stipulated in the common university entrance regulations. In addition, candidates must obtain at least the minimum cut-off points for the year at the Kenya Certificate of Secondary Education (KCSE) as determined from one of the following four-subject clusters: Alternative A Mathematics Physics Chemistry Biology or Geography Alternative B Mathematics Physical Sciences Biological Sciences Geography or any group V Subject *The above clusters may change from year to year. For PSSP admission, candidates with a mean grade of C+ and a B in Mathematics, Physics and Chemistry (or Mathematics, Physical Sciences and Biological Sciences) are admissible on a first come first served basis. An equivalent Diploma with credit or higher grade may also be admitted to 3 rd year of study while Passes may be admitted to the 2 nd year of study (All subject to the KCSE mean grade of C+ and C+ in mathematics, Physics & Chemistry). Those holding qualifications equivalent to the above from institutions recognized by Moi University Senate may also be admitted. MPh i l & MSc. Pr o g r a m m e s The common entry requirements of the Moi University Graduate School shall apply. The candidates should hold at least Lower Second Class Honours in the relevant field or any other Bachelors degree from institutions recognised by Moi University senate. DPhil Programmes The minimum requirements are according to the Rules and Regulations of the School of Graduate studies for Doctor of Philosophy degrees. Candidates must be holders of a relevant Masters degree of Moi University or from institutions recognised by Moi University senate. In addition to the Masters degree, the candidate shall normally have a Bachelors degree. Duration of the Programmes The Bachelor of Engineering programmes runs for five academic years (10 semesters). Between the academic years, the following courses are offered: Workshop Practice (12 weeks), guided Industrial Attachment I, II & III (8 weeks each). The M.Phil & M. Sc. Programmes in all departments consist of course work, examination and thesis, normally extending over a period of two years distributed over four semesters of full time attendance, or a maximum period of four years of part-time attendance from the date of registration. The D.Phil programme consists of course work, examination and thesis, normally extending over a period of four years of full time attendance, or a maximum period of seven years of part-time attendance from the date of registration. Ba c h e l o r o f En g i n e e r i n g in El e c t r i c a l a n d Electronics Engineering (Computer Engineering) The main objectives of the programme are to: The objectives of the programme are to prepare graduate engineers who: a) Train computer engineering graduates who can accomplish the design, analysis, construction and installation of computer systems and infrastructural facilities, using a professional approach; b) Train computer engineers with a sound knowledge of the fundamentals of computer science and engineering so as to enable them to participate in research and consultancy services; c) Develop entrepreneurial skills among graduate engineers as a basis for self employment; d) Train computer engineers who can provide expert systems maintenance and support. 274

4 School of Engiineering Course Structure Year 1 COE 121 Introduction to Computers and Applications 2 IRD 107 Communication Skills for Engineers 3 MPE 161 Engineering Drawing I 3 PHY 105 Physics for Engineers 4 TEC 101 Basic Engineering Mathematics I 3 TEC 105 Introduction to the Engineering Profession and Safety 2 TEC 111 Introduction to Materials Science 3 TEC 114 Basic Mechanics 3 Total 23 COE 162 Introduction to Computer Programming 3 ECE 112 Circuit Theory I 3 ECE 152 Electrical Engineering Materials 3 MPE 166 Engineering Drawing II a with CAD 3 TEC 103 Basic Engineering Mathematics II 3 TEC 106 Probability and Statistics 2 TEC 107 HIV / AIDS Awareness 2 TEC 112 Chemistry for Engineers 4 Total 23 Year 2 COE 251 Computer Operating Systems 3 ECE 211 Circuit Theory II 3 ECE 231 Electrical Measurements 3 ECE 261 Basic Electrical Machines 3 ECE 281 Basic Electronics 3 MAT 206 Numerical Methods 3 MAT 207 Engineering Mathematics I 3 MPE 241 Mechanics of Machines I 3 COE 244 Web Design and Implementation 2 ECE 242 Electromagnetic Fields 3 ECE 252 Analogue Electronics I 3 ECE 272 Basic Electrical Power 3 ECE 282 Digital Electronics I 3 ECE 294 Research Methods 2 MAT 208 Engineering Mathematics II 3 MPE 202 Fluid Mechanics & Thermodynamics 3 MPE 222 Solid Mechanics I 3 Total 25 COE 290 Workshop Practice 3 Year 3 Code Course Title Units COE 363 Object-Oriented Programming 3 ECE 311 Network Analysis and Synthesis 3 ECE 321 Signals 3 ECE 331 Control Systems I 3 ECE 341 Electromagnetic Waves 3 ECE 351 Analogue Electronics II 3 ECE 361 Electrical Machines I 3 ECE 381 Digital Electronics II 3 COE 332 Database Design and Management 3 COE 362 Data Structures and Algorithms 3 COE 364 Systems Programming 3 COE 382 Computer Networks 3 ECE 322 Introduction to Telecommunications Engineering 3 ECE 342 Transmission Lines 3 ECE 352 Analogue Electronics III 3 ECE 382 Microprocessor Systems & Assembly Language Programming 3 COE 390 Industrial Attachment I 3 275

5 Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) Year 4 COE 481 Software Engineering 3 COE 493 Engineering Project I 1 ECE 421 Communication Networks 4 ECE 423 Digital Communications 4 ECE 433 Control Systems II 3 ECE 451 Power Electronics I 3 ECE 481 Microprocessor Interfacing and Applications 3 MAT 407 Complex Analysis 3 COE 412 User Interface Design and Applications 3 COE 442 Computer Graphics and Multimedia 3 COE 454 Distributed Systems 3 COE 466 Neural Networks 3 COE 444 Advanced Web Design 3 COE 493 Engineering Project I 1 ECE 432 Instrumentation 3 ECE 438 Digital Control 3 ECE 494 Engineering Management 3 Total 25 COE 490 Industrial Attachment II 3 Year 5 Elective I 3 Elective II 3 COE 561 Artificial Intelligence and Expert Systems 3 COE 590 Engineering Project II 4 ECE 521 Mobile and Wireless Communications 4 ECE 573 Renewable Energy Technologies 2 ECE 575 Energy Management and Environmental Protection 2 ECE 593 Law, Ethics and Professional Practice 3 Elective III 3 Elective IV 3 COE 590 Engineering Project II 4 ECE 522 Photonic Devices and Fibre Optic Communication 4 ECE 526 Information Theory and Security 3 ECE 594 Operations Research 3 Total 20 COE 596 Industrial Attachment III 2 Electives COE 511E Current Topics in Computer Engineering 3 COE 512E Human Computer Interaction 3 COE 514E Simulation and Modelling 3 COE 552E Distributed Objects 3 COE 553E Embedded Systems Design 3 COE 561E Computer Games Design and Development 3 COE 569E Finite Element Analysis 3 ECE 524E Digital Signal Processing 3 ECE 525E Current Topics in Power Systems & Electrical Machines 3 ECE 528E Tele-Vision Engineering 3 ECE 533E Programmable Logic Controllers 3 ECE 543E Radio Frequency Circuit Design 3 ECE 551E Electronic Circuits and Systems 3 ECE 599E Project Management 3 Ba c h e l o r o f En g i n e e r i n g in El e c t r i c a l a n d Electronics Engineering (Power and Machines ) The objectives of the programme are to prepare graduate engineers who: a) Are capable of designing, analyzing, implementing and maintaining electrical power systems and machines; b) Are capable of designing, fabricating, testing and maintaining electrical and electronic equipment and instruments; c) Are highly skilled in information and communications technology d) Are equipped with appropriate vocational and entrepreneurship skills; 276

6 School of Engiineering e) Have positive and responsive attitudes, initiative, and creative thinking. Programme Structure Year 1 COE 121 Introduction to Computers and Applications 2 IRD 107 Communication Skills for Engineers 3 MPE 161 Engineering Drawing I 3 PHY 105 Physics for Engineers 4 TEC 101 Basic Engineering Mathematics I 3 TEC 105 Introduction to the Engineering Profession and Safety 2 TEC 111 Introduction to Materials Science 3 TEC 114 Basic Mechanics 3 Total 23 COE 162 Introduction to Computer Programming 3 ECE 112 Circuit Theory I 3 ECE 152 Electrical Engineering Materials 3 MPE 166 Engineering Drawing II a with CAD 3 TEC 103 Basic Engineering Mathematics II 3 TEC 106 Probability and Statistics 2 TEC 107 HIV/AIDS Awareness 2 TEC 112 Chemistry for Engineers 4 Total 23 Year2 COE 251 Computer Operating Systems 3 ECE 211 Circuit Theory II 3 ECE 231 Electrical Measurements 3 ECE 261 Basic Electrical Machines 3 ECE 281 Basic Electronics 3 MAT 206 Numerical Methods 3 MAT 207 Engineering Mathematics I 3 MPE 241 Mechanics of Machines I 3 COE 244 Web Design and Implementation 2 ECE 242 Electromagnetic Fields 3 ECE 252 Analogue Electronics I 3 ECE 272 Basic Electrical Power 3 ECE 282 Digital Electronics I 3 ECE 294 Research Methods 2 MAT 208 Engineering Mathematics II 3 MPE 202 Fluid Mechanics & Thermodynamics 3 MPE 222 Solid Mechanics I 3 Total 25 ECE 290 Workshop Practice 3 Year 3 COE 363 Object Oriented Programming 3 ECE 311 Network Analysis & Synthesis 3 ECE 321 Signals 3 ECE 331 Control Systems I 3 ECE 341 Electromagnetic Waves 3 ECE 351 Analogue Electronics II 3 ECE 361 Electrical Machines I 3 ECE 381 Digital Electronics II 3 COE 332 Database Design and Management 3 COE 362 Data Structures and Algorithms 3 ECE 322 Introduction to Telecommunications Engineering 3 ECE 342 Transmission Lines 3 ECE 352 Analogue Electronics III 3 ECE 362 Electrical Machines II 3 ECE 372 Electrical Power Systems I 3 ECE 382 Microprocessor Systems and Assembly Language Programming 3 ECE 390 Industrial Attachment I 3 277

7 Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) Year 4 Semester 1 ECE 421 Communication Networks 4 ECE 423 Digital Communications 4 ECE 433 Control Systems II 3 ECE 451 Power Electronics I 3 ECE 471 Electrical Power Systems II 3 ECE 481 Microprocessor Interfacing and Applications 3 ECE 493 Engineering Project I 1 MAT 407 Complex Analysis 3 ECE 432 Instrumentation 3 ECE 438 Digital Control 3 ECE 452 Power Electronics II 3 ECE 462 Special Electrical Machines 3 ECE 472 Switchgear and Protection 3 ECE 474 Power Transmission and Distribution 3 ECE 476 High Voltage Technology 3 ECE 493 Engineering Project I 1 ECE 494 Engineering Management 3 Total 25 ECE 490 Industrial Attachment II 3 Year 5 Elective I 3 Elective II 3 ECE 561 Electric Motor Drive Systems 3 ECE 571 Power Systems Analysis 4 ECE 573 Renewable Energy Technologies 2 ECE 575 Energy Management and Environmental Protection 2 ECE 590 Engineering Project II 4 ECE 593 Law, Ethics and Professional Practice 3 Elective III 3 Elective IV 3 ECE 562 Electrical Machine Design 4 ECE 572 Power System Dynamics and Control 3 ECE 590 Engineering Project II 4 ECE 594 Operations Research 3 Total 20 ECE 596 Industrial Attachment II 2 Electives COE 511E Current Topics in Computer Engineering 3 COE 512E Human Computer Interaction 3 COE 514E Simulation and Modelling 3 COE 552E Distributed Objects 3 COE 553E Embedded Systems Design 3 COE 561E Computer Games Design and Development 3 COE 569E Finite Element Analysis 3 ECE 524E Digital Signal Processing 3 ECE 528E Tele-Vision Engineering 3 ECE 532E Optimization and Control 3 ECE 533E Programmable Logic Controllers 3 ECE 534E Fuzzy Logic and Neural Networks 3 ECE 543E Radio Frequency Circuit Design 3 ECE 551E Electronic Circuits and Systems 3 ECE 566E Current Topics in Power Systems and Electrical Machines 3 ECE 576E Utilization of Electrical Energy 3 ECE 577E Electrical Power Generation 3 ECE 578E Power System Economics and Planning 3 ECE 579E Illumination Engineering 3 ECE 599E Project Management 3 Ba c h e l o r o f En g i n e e r i n g in El e c t r i c a l a n d Te l e c o m m u n i c a t i o n s En g i n e e r i n g The objectives of the programme are to prepare graduate engineers who: a) Are capable of designing, analyzing, implementing and maintaining telecommunication systems; 278

8 School of Engiineering b) Are capable of designing, fabricating, testing and maintaining electrical and electronic equipment and instruments; c) Are highly skilled in information and communications technology d) Are equipped with appropriate vocational and entrepreneurship skills; e) Have positive and responsive attitudes, initiative, and creative thinking. Programme Srtucture Ye a r 1 COE 121 Introduction to Computers and Applications 2 IRD 107 Communication Skills for Engineers 3 MPE 161 Engineering Drawing I 3 PHY 105 Physics for Engineers 4 TEC 101 Basic Engineering Mathematics I 3 TEC 105 Introduction to the Engineering Profession and Safety 2 TEC 111 Introduction to Materials Science 3 TEC 114 Basic Mechanics 3 Total 23 COE 162 Introduction to Computer Programming 3 ECE 112 Circuit Theory I 3 ECE 152 Electrical Engineering Materials 3 MPE 166 Engineering Drawing IIa with CAD 3 TEC 103 Basic Engineering Mathematics II 3 TEC 106 Probability and Statistics 2 TEC 107 HIV / AIDS Awareness 2 TEC 112 Chemistry for Engineers 4 Total 23 Year 2 COE 251 Computer Operating Systems 3 ECE 211 Circuit Theory II 3 ECE 231 Electrical Measurements 3 ECE 261 Basic Electrical Machines 3 ECE 281 Basic Electronics 3 MAT 206 Numerical Methods 3 MAT 207 Engineering Mathematics I 3 MPE 241 Mechanics of Machines I 3 COE 244 Web Design and Implementation 2 ECE 242 Electromagnetic Fields 3 ECE 252 Analogue Electronics I 3 ECE 272 Basic Electrical Power 3 ECE 282 Digital Electronics I 3 ECE 294 Research Methods 2 MAT 208 Engineering Mathematics II 3 MPE 202 Fluid Mechanics and Thermodynamics 3 MPE 222 Solid Mechanics I 3 Total 25 ECE 290 Workshop Practice 3 Year 3 COE 363 Object-Oriented Programming 3 ECE 311 Network Analysis & Synthesis 3 ECE 321 Signals 3 ECE 331 Control Systems I 3 ECE 341 Electromagnetic Waves 3 ECE 351 Analogue Electronics II 3 ECE 361 Electrical Machines I 3 ECE 381 Digital Electronics II 3 ECE 393 Research Methods 1 Total

9 Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) COE 332 Database Design and Management 3 COE 362 Data Structures and Algorithms 3 ECE 322 Introduction to Telecommunications Engineering 3 ECE 342 Transmission Lines 3 ECE 352 Analogue Electronics III 3 ECE 362 Electrical Machines II 3 ECE 372 Electrical Power Systems I 3 ECE 382 Microprocessor Systems and Assembly Language Programming 3 ECE 390 Industrial Attachment I 3 Year 4 ECE 421 Communication Networks 4 ECE 423 Digital Communications 4 ECE 433 Control Systems II 3 ECE 451 Power Electronics I 3 ECE 471 Electrical Power Systems II 3 ECE 481 Microprocessor Interfacing and Applications 3 ECE 493 Engineering Project I 1 MAT 407 Complex Analysis 3 ECE 426 Audio Engineering 3 ECE 432 Instrumentation 3 ECE 438 Digital Control 3 ECE 442 Radio Communication Systems 3 ECE 444 Antenna Engineering 3 ECE 446 Microwave Devices & Systems 3 ECE 452 Power Electronics II 3 ECE 493 Engineering Project I 1 ECE 494 Engineering Management 3 Total 25 ECE 490 Industrial Attachment II 3 Year 5 Elective I 3 Elective II 3 ECE 521 Mobile and Wireless Communication 4 ECE 523 Satellite Communication and Broadcasting 3 ECE 573 Renewable Energy Technologies 2 ECE 575 Energy Management and Environmental Protection 2 ECE 590 Engineering Project II 4 ECE 593 Law, Ethics And Professional Practice 3 Elective III 3 Elective IV 3 ECE 522 Photonic Devices & Fibre Optic Communication 4 ECE 526 Information Theory and Security 3 ECE 590 Engineering Project II 4 ECE 594 Operations Research 3 Total 20 ECE 596 Industrial Attachment II 2 Electives COE 511E Current Topics in Computer Engineering 3 COE 512E Human Computer Interaction 3 COE 514E Simulation and Modelling 3 COE 552E Distributed Objects 3 COE 553E Embedded Systems Design 3 COE 561E Computer Games Design and Development 3 COE 569E Finite Element Analysis 3 ECE 524E Digital Signal Processing 3 ECE 525E Current Topics in Telecommunications Engineering 3 ECE 528E Tele-Vision Engineering 3 ECE 532E Optimization and Control 3 ECE 533E Programmable Logic Controllers 3 ECE 534E Fuzzy Logic and Neural Networks 3 280

10 School of Engiineering ECE 543E Radio Frequency Circuit Design 3 ECE 551E Electronic Circuits and Systems 3 ECE 579E Illumination Engineering 3 ECE 599E Project Management 3 Ba c h e l o r o f En g i n e e r i n g in Me c h a n i c a l a n d Production Engineering The main objectives of the B.Eng (Mech. & Prod. Eng) Programme are: Prepare graduate engineers for the industrial sector in the fields of Design, Production & Installation and Operations & Maintenance so as to accelerate the growth of manufacturing industries. Achieve a practical orientation in the Graduate Engineer Encourage participation by the academic staff and students in research projects, consultancy services and other professional activities Encourage positive and responsive vocational attitudes as well as initiative and creative thinking oriented to the field of work Impart management skills as a basis for entrepreneurial development and employment. Admission Requirements To be eligible for admission into the degree programme, all applicants must satisfy the minimum entrance requirements stipulated in the University entrance regulations. In addition, applicants must obtain at least the minimum cut-off points for the year at KCSE (or equivalent) in the following cluster of four subjects: Mathematics, Physics, Chemistry, and either Biology or Geography or any Group IV. Design of the Programme The degree programme is designed to offer sound training in the following core areas: Applied Mechanics and Materials Science Engineering Design and Drawing Industrial Engineering and Management Manufacturing Engineering and Workshop Technology Thermodynamics and Fluid Mechanics Engineering mathematics, computer-based analyses, fundamentals of electrical engineering and other courses are also offered as compulsory supportive courses in the programme. Selected courses from the Schools of Science and Human Resources Development are built into the Programme during the first two years of study to enable students develop a broad education outlook in their training. Programme Structure Key to codes COE: Courses offered by the Department of Electrical & Computer Engineering ECE: Courses offered by the Department of Electrical & Computer Engineering IRD : Courses offered by the School of Human Resources Development MAT: Courses offered by the Department of Mathematics & Computer Science TEC: Common courses offered by the School of Engineering Year 1 Semester1 COE 121 Introduction to Computers and Applications 2 IRD 107 Communication Skills for Engineers 3 MPE 161 Engineering Drawing I 3 PHY 107 Physics for Engineers 4 TEC 101 Basic Engineering Mathematics I 3 TEC 105 Introduction to Engineering Profession & Safety 2 MPE 111 Introduction to Materials Science 3 MPE 114 Basic Engineering Mechanics 3 Sub-total 23 COE 162 Introduction to Computer Programming 3 ECE 112 Circuit Theory I 3 IRD 103 Development Concepts and applications 3 MPE 162 Engineering Drawing II 4 TEC 103 Basic Engineering Mathematics II 3 281

11 Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) TEC 106 Probability & Statistics 2 TEC 107 HIV/AIDS Awareness 2 TEC 112 Chemistry for Engineers 4 Sub-total 24 Year 2 SemesterI ECE 231 Electrical Measurements 3 ECE 261 Basic Electrical Machines 3 MAT 206 Numerical Methods 3 MAT 207 Engineering Mathematics I 3 MPE 241 Mechanics of Machines I 3 MPE 261 Engineering Drawing III 3 MPE 231 Fluid Mechanics I 3 Sub-total 21 ECE 262 Basic Electrical Power 3 MAT 208 Engineering Mathematics II 3 MPE 222 Solid Mechanics I 3 MPE 232 Fluid Mechanics II 3 MPE 212 Materials Science I 3 MPE 242 Mechanics of Machines II 3 MPE 272 Thermodynamics I 3 MPE 205 Statistics for Engineers 3 Sub-total 24 MPE 290 Workshop Practice 3 Ye a r 3 SemesterI ECE 301 Basic Electronics 3 MPE 311 Materials Science II 3 MPE 341 Mechanics of Machines III 3 MPE 321 Solid Mechanics II 3 MPE 331 Fluid Mechanics III 3 MPE 351 Metrology 3 MPE 361 Mechanical Engineering Design I 3 MPE 371 Thermodynamics II 3 Sub-total 24 ECE 302 Control Systems 3 MPE 302 Research Methods 2 MPE 322 Solid Mechanics III 3 MPE 332 Fluid Mechanics IV 3 MPE 352 Measurement & Instrumentation 3 MPE 362 Mechanical Engineering Design II 3 MPE 372 Heat Transfer 3 IRD 301 Introduction to Engineering Economics 3 Sub-total 23 MPE 390 Industrial Attachment I 3 Year 4 MPE 411 Industrial Engineering I 3 MPE 421 Solid Mechanics IV 3 MPE 441 Foundry Technology 3 MPE 451 Fracture of Materials 3 MPE 461 Jig and Fixture Design 3 MPE 471 Refrigeration & Air-Conditioning 3 IRD 305 Entrepreneurship for Small Business 3 Sub-total 21 MPE 412 Industrial Engineering II 3 MPE 422 Plasticity 3 MPE 442 Mechanical Vibrations 3 MPE 452 Welding & Machine Tool Technology 4 MPE 463 Computer Aided Design (CAD) 3 MPE 472 Energy Conversion and Management 3 MPE 482 Automotive Engineering 3 Sub-total 22 MPE 490 Industrial Attachment II 3 Year 5 SemesterI MPE 503 Industrial Law and Ethics 3 MPE 504 Operations Research 3 MPE 541 Metal Forming Technology 3 MPE 571 Renewable Energy Resources 3 MPE 580 Project 4 282

12 School of Engiineering Elective I 3 Elective II 3 Sub-total 22 MPE 505 Industrial Organization & Finance 3 MPE 506 Engineering Business Management 3 MPE 511 Non-Destructive Testing Methods 3 MPE 562 Non-Conventional Manufacturing Processes 3 MPE 580 Project 4 Elective III 3 Elective IV 3 Sub-total 22 MPE 590 Industrial Attachment III 3 Electives I to IV are courses selected, subject to the advice and prior approval of the Department, from the following list or other equivalently weighted courses approved by Senate. MPE 512E Composite Materials 3 MPE 513E Surface Treatment of Metals 3 MPE 514E Polymer Engineering 3 MPE 515E Extraction and Refining of Metals 3 MPE 516E Nanotechnology 3 MPE 531E Tribology 3 MPE 541E Scrap Metal Processing 3 MPE 542E Flexible Manufacturing Systems 3 MPE 551E Metal Cutting Tools 3 MPE 552E Robotics 3 MPE 571E Power Plant Engineering 3 MPE 572E Turbo-Machinery 3 MPE 573E Industrial Pollution and Control 3 MPE 574E Internal Combustion Engines 3 MPE 581E Introduction to Finite Element Method 3 MPE 582E Experimental Stress Analysis 3 MPE 583E Advanced Automotive Engineering 3 MPE 584E Optimization Methods for Eng. Systems 3 MPE 575E Hydraulic Systems and Components 3 Examination Regulations To be awarded the B. Eng. Mech. & Prod. Eng. degree a student must pass all the prescribed courses and the University Common Regulations and specific School regulations for undergraduate examinations shall apply subject to the exceptions in (2) below. The exceptions to (1) are: (a) Introduction to Engineering Profession and Safety (TEC 105), HIV/AIDS Awareness (TEC 107) and Research Methodology (MPE 301) Marks from continuous assessment shall account for 100% of the final mark. Drawing and design courses (MPE 161, MPE 162, MPE 261, MPE 361, MPE 362, MPE 461 and MPE 463) Each is examined by continuous assessment (in form of design exercises and/or drawings) and one four-hour written examination at the end of semester. The continuous assessment and end-of-semester examination shall account for 40% and 60% of the final marks respectively. Workshop Practice (MPE 290) Marks from the assessment of practical work shall account for 100% of the final mark. Industrial Attachment (MPE 390, MPE 490, MPE 590) Marks from assessment of practical work at the place of attachment and final technical report shall account for 30% and 70% of the final mark respectively. Project (MPE 580) The final mark shall be composed of: First seminar on the project (10%); second seminar on the project (20%); submitted final technical report (40%); and student s contribution and demonstration (30%). All courses not bearing the MPE code - These are taught by other departments and therefore shall be examined according to the specific regulations of the teaching department concerned. The common regulations of the School shall apply for the classification of the degree. Ba c h e l o r o f En g i n e e r i n g in In d u s t r i a l a n d Te x t i l e En g i n e e r i n g The Department of Manufacturing, Industrial and Textile Engineering offers a bachelor of engineering programme in Industrial & Textile Engineering. The programme lays a heavy emphasis on the practical application of theoretical knowledge. The practical emphasis is achieved through extensive workshop and laboratory training, seminars, industrial visits and industrial attachments. 283

13 Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) The main objectives of the department are to: To equip its graduates with engineering knowledge, scientific knowledge, intellectual and social competences to accomplish design and manufacture of engineering components, industrial engineering systems and textile products. To impart its graduates with knowledge competences to be able to assist other professionals in designing infrastructural facilities that use industrial products. To achieve a practically oriented graduate in industrial and textile engineering. To encourage staff and students to participate in engineering related activities and consultancy services in collaboration with local and international institutions. Design of the Degree Programme The five-year Bachelor of Engineering degree in Industrial and Textile Engineering is designed to offer sound training in the following core areas of the discipline: Engineering Sciences Manufacturing Engineering Industrial Engineering Yarn formation Engineering Fabric manufacture Engineering Wet process engineering Industrial management Mathematics, computer programming, mechanics of machines, electrical engineering and other complementary courses are also offered as compulsory supportive courses in the programme. Concepts from the pure sciences and other disciplines within the University are built into the programme to enable the students have a multi-disciplinary outlook in their training. Admission Requirements (i) All candidates admitted to the degree programme of Bachelor of Engineering Industrial and Textile Engineering must satisfy the minimum entrance requirements stipulated in the common university entrance regulations. (ii) In addition, candidates must obtain at least the minimum cut-off points for the year at the Kenya Certificate of Secondary Education (KCSE) as determined from one of the following four-subject clusters: Alternative A Alternative B Mathematics Mathematics Physics Physical Sciences Chemistry Biological Sciences Either Biology or Either Geography or any Geography or any Group V (i.e. technical Group V (i.e. technical group) subjects Group) subjects The above clusters may change from year to year. (iii) Those holding qualifications equivalent to the above from institutions recognised by Moi University Senate may also be admitted. Programme Structure Year 1 Code Course Title Units CEO 121 Introduction to Computers and Application 2 IRD 107 Communication Skills for Engineers 3 MPE 161 Engineering Drawing I 3 PHY 105 Physics for Engineers 4 TEC 101 Engineering Mathematics I 3 TEC 105 Introduction to Engineering and Safety 2 TEC 111 Introduction to Materials Science 3 TEC 114 Basic Mechanics 3 Total 23 CEO 162 Introduction to Computer Programming 3 IRD 103 Development Concepts and Applications 3 MPE 162 Engineering Drawing II 3 TEC 103 Engineering Mathematics II 4 TEC 106 Probability and Statistics 2 TEC 107 HIV-AIDS Awareness 1 TEC 112 Chemistry for Engineers 4 284

14 School of Engiineering Year 2 Total 20 Code Course Title Units ECE 201 Electrical Technology I 3 MAT 206 Numerical Analysis 3 MAT 207 Engineering Mathematics III 3 MIT 221 Textile Raw Materials 3 MIT 231 Introduction to Industrial Manufacturing 2 MPE 242 Mechanics of Machines 3 MPE 261 Engineering Drawing III 3 STA 205 Statistics 3 Total 23 ECE 202 Electrical Technology II 3 MAT 208 Engineering Mathematics III 3 MIT 212 Introduction to Manufacturing Processes 3 MIT 222 Yarn Formation I 3 MIT 232 Industrial Chemistry 3 MIT 234 Industrial mechanics 3 MPE 221 Solid Mechanics 3 MPE 272 Thermodynamics I 3 MIT 290 Workshop, Labs and Field Studies (12 weeks) Year 3 Code Course Title Units CEO 301 Computer Programming 3 ECE 301 Basic Electronics 3 MIT 311 Materials Science 3 MIT 321 Textile Chemistry 3 MIT 323 Yarn Formation II 3 MIT 331 Fundamentals of Fluid Mechanics 3 MIT 341 Research Methodology 1 MPE 371 Thermodynamics II 3 Total 22 CEO 302 Database Systems 3 ECE 331 Control Systems 3 IRD 301 Introduction to Engineering Economics 3 MIT 312 Engineering Design I 3 MIT 314 Material Testing I 3 MIT 322 Fabric Formation I 3 MIT 324 Textile Physics 3 Total 21 MIT 390 Industrial Attachment I (8 weeks) 3 Year 4 Code Course Title Units IRD 405 Entrepreneurship and Technical Innovation 3 MIT 411 Material Testing II 3 MIT 421 Fabric Design 3 MIT 423 Fabric Formation II 3 MIT 431 Engineering Ergonomics 3 MIT 443 Optimization Techniques 3 MIT 445 Engineering Economics 3 Total 21 MIT 412 Engineering Design II 3 MIT 414 Manufacturing Processes I 3 MIT 416 Plant Engineering 3 MIT 422 Textile Pre-treatment and Finishing 3 MIT 424 Textile Colouration 3 MIT 426 Fabric Formation III 3 MIT 432 Industrial Machines Maintenance 3 MIT 442 Instrumentation 3 MIT 490 Industrial Attachment II (8 weeks) 3 Year 5 Code Course Title Units MIT 501 Industrial Law and Professional Ethics 3 MIT 511 Manufacturing Processes II 3 MIT 521 Introduction to Technical Textiles 2 MIT 523 Fabric Formation IV 3 MIT 541 Optimization Techniques II 3 Elective I 3 Elective II 3 285

15 Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) MIT 580 Research Project 4 MIT 532 Industrial Pollution and Control 3 MIT 534 Industrial Organisation and Psychology 3 MIT 542 Production Management 3 MIT 544 Quality Control and Assurance 3 Elective III 3 Elective IV 3 MIT 580 Research Project 4 Total 22 MIT 590 Industrial Attachment II (8 weeks) 2 Electives Electives I to VI are courses selected from the following list subject to the advice and prior approval of the department. The students are free to select other electives offered in the School. Students will be advised on the electives offered in any particular semester. This offer will generally depend on the availability of expertise, the student s desired career specialisation and the needs of the profession. Code Course Title Units MIT 513E Advanced Manufacturing 3 MIT 514E Composite Materials 3 MIT 515E Non-Destructive tests 3 MIT 516E Engineering Polymers 3 MIT 525E Industrial Textiles 3 MIT 526E Non-woven Technology 3 MIT 527E Smart Textiles 3 MIT 528E Garment Technology 3 MIT 531E Computer Applications in Industrial Management 3 MIT 533E Industrial Processes 3 MIT 535E Environmental impact assessment 3 MIT 546E Artificial Intelligence 3 Examination Regulations 1. The university common regulations for undergraduate examinations shall apply. 2. Except for courses indicated in (3) below each course shall be examined by continuous assessment and one three-hour examination paper at the end of the semester graded as follows. End of Semester Examination 70% Continuous Assessment in the form of written test/assignments 30% The pass mark in all courses shall be 40%. Grading shall be done as follows: 70 and above A B C D Below 40 E: Fail 3. The exceptions to the above rule (2) are: (a) For MIT 580 Project, the distribution of marks shall be as follows: - Submitted final technical report 40% Seminars on the project 20% Oral examination 40% (b) For MIT 290 Workshops, Labs and Field Studies, the marks for the assess ment of practical work and technical report shall be dis tributed as follows: Assessment of practical work 70% Final technical report 30% (c) For MIT 390 and MIT 490 Industrial Attachment I and II, the marks from assessment of practical work and technical report shall be distributed as follows: Assessment at place of attachment 30% Final Technical report 70% (d) For TEC 105 Introduction to Engineering Profession and Safety, TEC 107 HIV/AIDS Awareness and MIT 341Research Methodology, assessment shall be in the form of coursework accounting for 100% of the final mark. (e) All courses not bearing the MIT code are taught by 286

16 School of Engiineering other departments and shall therefore be examined according to the specific regulations of the teaching department concerned. Ba c h e l o r o f En g i n e e r i n g in Ch e m i c a l a n d Pr o c e s s En g i n e e r i n g Programme Structure Year I Code Course Title Units TEC 101 Basic Engineering Mathematics I 3 TEC 114 Basic Mechanics 3 MPE 161 Engineering Drawing I 3 COE 121 Introduction to Computers & Applications 2 TEC 111 Introduction to Material Science 3 TEC 105 Introduction to Engineering Profession and Safety 2 PHY 107 Physics for Engineers 4 IRD 107 Communication Skills for Engineers 3 Total 23 TEC 103 Basic Engineering Mathematics II 4 TEC 106 Probability and Statistics 2 TEC 107 HIV/AIDS Awareness 2 MPE 162 Engineering Drawing II 3 COE 162 Introduction to Computer Programming 3 IRD 103 Development Concepts & Applications 3 TEC 112 Chemistry for Engineers 4 Total 21 Year II Code Course Title Units MAT 206 Numerical Methods 3 MAT 207 Engineering Mathematics II 3 CVS 217 Solid Mechanics 3 MPE 241 Mechanics of Machines I 3 ECE 201 Electrical Technology I 3 CHP 293 Principles of Chemical Process Calculations 3 CHP 213 Inorganic Chemistry 3 CHP 225 Foreign Language I 2 (Technical French/German) Total 23 MAT 208 Engineering Mathematics III 3 ECE 202 Electrical Technology II 3 CHP 294 Principles of Mass and Energy Balance 3 CHP 242 Engineering Thermodynamics 3 CHP 252 Particle Technology I 3 CHP 214 Organic Chemistry 3 CHP 216 Physical Chemistry 3 CHP 226 Foreign Language II 2 (Technical French/German) Total 23 CHP 290 Workshop Practice (12 weeks) 3 Year 3 Code Course Title Units ECE 301 Basic Electronics 3 COE 301 Computer Programming 3 CHP 357 Fluid Mechanics I 3 CHP 311 Analytical Chemistry 2 CHP 341 Chemical Engineering Thermodynamics I 3 CHP 353 Particle Technology II 3 CHP 373 Heat Transfer 3 CHP 391 Chemical Engineering Practicals I 1 Total Units 21 IRD 301 Introductory Economics for Engineers 3 CHP 372 Mass Transfer I 3 CHP 358 Fluid Mechanics II 3 CHP 344 Process Measurement & Instrumentation 3 CHP 342 Chemical Engineering Thermodynamics II 3 CHP 316 Material Science 3 CHP 374 Steam Plant 3 CHP 392 Chemical Engineering Practicals II 1 Total Units 22 CHP 390 Industrial Attachment I (8 weeks) 3 Year 4 287

17 Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) Code Course Title Units CHP 431 Industrial Pollution Control I 3 CHP 475 Mass Transfer II 3 CHP 453 Fluid Mechanics III 3 CHP 445 Process Modelling & Simulation 3 CHP 461 Chemical Engineering Design I 3 CHP 481 Reactor Engineering I 3 CHP 421 Process Economics 3 CHP 491 Unit Operations Lab I 1 Total Units 22 CHP 432 Industrial Pollution Control II 3 CHP 474 Mass Transfer III 3 CHP 452 Mechanics of Non-Newtonian Fluids 2 CHP 476 Introduction to Biochemical Engineering 3 CHP 462 Chemical Engineering Design II 3 CHP 482 Reactor Engineering II 3 CHP 446 Process Dynamics & Control 3 CHP 444 Non-Fossil Energy Technologies 2 CHP 492 Unit Operations Lab II 1 Total Units 23 CHP 490 Industrial Attachment II (8 weeks) 3 Year 5 Code Course Title Units IRD 305 Entrepreneurship for Small Business 3 MPE 504 Operations Research 3 CHP 593 Industrial Law and Ethics 3 CHP 531 Industrial Processes 3 CHP 591 Plant Design Project 4 CHP 592 Chemical Engineering Project 2 CHP ***E Elective I 3 CHP ***E Elective II 3 Total Units 24 CHP 542 Process Optimization 3 CHP 522 Industrial Management 3 CHP 544 Safety in Chemical Industries 2 CHP 591 Plant Design Project 4 CHP 592 Chemical Engineering Project 2 CHP ***E Elective III 3 CHP ***E Elective IV 3 Total Units 20 CHP 590 Industrial Attachment III (8 weeks) 2 Total Number of Units in Year Five 44+2 Electives Code Course Title Units CHP 592E Technology of Fats and Oils 3 CHP 582E Pulp and Paper Technology 3 CHP 583E Biochemical Engineering 3 CHP 584E Petroleum Technology 3 CHP 593E Food Processing Industries 3 CHP 594E Computer Aided Process Simulation 3 CHP 587E Electrochemical & Corrosion Technology 3 CHP 588E Advanced Industrial Pollution Control 3 CHP 589E Polymer Technology 3 CHP 590E Introduction to Pharmaceutical Engineering 3 CHP 591E Refrigeration and Air Conditioning 3 Examination Regulations The University Common Regulation for Undergraduate Examination and School specific regulations shall apply, subject to the exceptions in (2) below. The exceptions to the above rule are: For the following design courses: CHP461 Chem. Eng. Design I, CHP462 Chem. Eng. Design II and CHP445 Process Modelling & Simulation, the distribution of marks shall be as follows: End of Semester Examination 40% Continuous Assessment in the form of take home assignments 40% Continuous Assessment in the form of sit in tests 20% The continuous assessment assignment and tests for CHP461 Chem. Eng. Design I and CHP462 Chem. Eng. Design II, shall be in the form of equipment design and/or drawings. The instructor may allow use of engineering handbooks and selected hand outs during the end of semester examination. 288

18 School of Engiineering (b) For CHP 592 Chemical Engineering Project and CHP 591 Plant Design Project, the distribution of marks shall be as follows: Oral presentations (in the middle and at the end of semester) 50% Project Report 50% (c) For CHP 391/392 Chemical Engineering Practical I/II and CHP 491/492 Unit Operation Lab I/II, the final marks would be based on Continuous Assessment alone. (d) For CHP290, Workshop Practice, the marks for assessment of practical work and technical report shall be distributed as follows: Assessment on Practical work 70% Final technical report 30% (e) For CHP390, CHP490 and CHP590, Industrial Attachment I, II & III, the marks for assessment of practical work and technical report shall be distributed as follows: Assessment at place of attachment 30% Final technical report 70% (f) TEC105 Introduction to Engineering Profession and Safety, and TEC107 HIV/AIDS Awareness- would be assessed though continuous assessments by means of reports and seminars. Ma s t e r o f Sc i e n c e in In d u s t r i a l En g i n e e r i n g The Department of Manufacturing, Industrial and Textile Engineering offers graduate programme leading to the following degree: Master of Science (MSc) in Industrial Engineering. This is done through course work, examination and thesis. The main objectives of the MSc programme are to: Prepare specialised engineers in Industrial Engineering who will strengthen the engineering, design and research capacity in universities, industries, research institutions and other institutions by providing advanced theoretical and practical training in their respective areas of specialization. Stimulate applied and theoretical research into solving problems in Industrial Engineering. Develop professional services capacity in Industrial Engineering. The expected outcome of this MSc programme will include: Ability to apply and guide in development and implementation of engineering concepts Provision of professional services in an ethical manner in the areas of expertise Background for admission to DPhil and/or other higher professional and graduate studies Eligibility and Entry Requirements for Admission to the MSc Degree Programme The common regulations for eligibility to the Master of Science programmes of Moi University shall apply. The following shall be entry requirements for admission into the MSc degree programme in Industrial Engineering: Holders of at least: Lower second class degree of Moi University in Textile Engineering or Industrial Engineering or Industrial Technology or Textile Technology or Mechanical and Production Engineering or Chemical Engineering or Manufacturing, Industrial and Textile Engineering or Materials Engineering or any other relevant degree First degree from an accredited university and recognised by Moi University senate as equivalent to (i) above Duration and Structure of the Programme The MSc programme shall consist of course work, examination and thesis, normally extending over a period of two academic years distributed over four semesters of full time attendance or a maximum period of four years of part-time attendance from the date of registration. In order to graduate, a student must successfully complete at least 50 units having 31 units of course work, and 19 units of thesis distributed over four semesters. The 31 units of coursework for MSc shall consist of: 10 units of core courses 12 units of programme required courses 289

19 Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) 9 units of elective courses The design of the MSc programme shall be as follows: Year 1 Semester 1: Coursework 14 units; Research work 2 units Year 1 Semester 2: Coursework 14 units; Research work 2 units Year 2 Semester 1: Coursework 0 units; Research work 9 units Year 2 Semester 2: Coursework 3 units; Research work 6 units Programme Structure Core Courses in the MSc Programme MIT 801 Research Methods 4 MIT 802 Industrial and Quality management 4 MIT 803 Computing Techniques and Applications 2 MIT 899 Thesis 19 Required Courses in the MSc Programme MIE 811 Engineering Materials 3 MIE 821 Industrial Engineering Design 2 MIE 831 Thermodynamics 3 MIE 832 Industrial systems and Processes 2 MIE 842 Industrial Instrumentation and Control 2 Elective Courses In addition to the core and required courses, a student will be required to do at least nine (9) units of elective courses, which will be selected from courses below or any other course(s) approved by Senate under the guidance of the department. MIT 810E Composite Mechanics 3 MIE 812E Mechanics of materials and Finite Elements Analysis 4 MIT 813E Fibre Reinforced Composites 3 MIT 822E Computer Aided Design and Manufacture 4 MIT 832E Industrial and Manufacturing Systems 3 MIE 835E Industrial Processes 3 MIT 838E Modern Manufacturing Techniques 3 MIT 841E Environmental Impact Assessment and Audit 3 MIT 844E Operations Management 3 MIT 845E Marketing Management 3 MIE 846E Industrial Finance 3 MIT 847E Management of Technology 3 MIT 849E Cleaner Production 3 Examination Regulations The University Common Regulation for MSc examination and School of Engineering specific regulations shall apply Except for the courses indicated in (d) and (e) below, each course shall be examined by a three-hour examination paper at the end of the semester, in addition to other forms of assessment The marks distribution under (b) will be as follows: End of Semester Examination 60% Continuous Assessment 40% Courses to be examined through continuous assessment and reports only: MIT 801, MIT 803, MIT 822E For the course MIT 841E, the distribution of marks shall be as follows:- End of Semester Examination 40% Project Report 40% Continuous Assessment in the Form of Sit-in Tests 20% Master of Science in Textile Engineering The main objectives of this programme are to: Prepare specialised engineers in Textile Engineering who will strengthen the engineering, design and research capacity in universities, industries, research institutions and other institutions by providing advanced theoretical and practical training in their respective areas of specialization. Stimulate applied and theoretical research into solving 290

20 School of Engiineering problems in Textile Engineering. Develop professional services capacity in Textile Engineering. The expected outcome of this MSc programme will include: Ability to apply and guide in development and implementation of engineering concepts Provision of professional services in an ethical manner in the areas of expertise Background for admission to DPhil and/or other higher professional and graduate studies Eligibility and Entry Requirements for Admission to the MSc Degree Programme The common regulations for eligibility to the Master of Science programmes of Moi University shall apply. The following shall be entry requirements for admission into the MSc degree programme in Textile Engineering: Holders of a first class or upper second class or lower second class degree of Moi University in Textile Engineering or Industrial Engineering or Industrial Technology or Textile Technology or Mechanical and Production Engineering or Chemical Engineering or Manufacturing, Industrial and Textile Engineering or Materials Engineering or any other relevant degree Holders of a first degree from an accredited university and recognised by Moi University senate as equivalent to (i) above Duration and Structure of the Programme The MSc programme shall consist of course work, examination and thesis, normally extending over a period of two academic years distributed over four semesters of full time attendance or a maximum period of four years of part-time attendance from the date of registration. In order to graduate, a student must successfully complete at least 50 units having 31 units of course work, and 19 units of thesis distributed over four semesters. The 31 units of coursework for MSc shall consist of: 10 units of core courses 12 units of programme required courses 9 units of elective courses The design of the MSc programme shall be as follows: Year 1 Semester 1: Coursework 14 units; Research work 2 units Year 1 Semester 2: Coursework 14 units; Research work 2 units Year 2 Semester 1: Coursework 0 units; Research work 9 units Year 2 Semester 2: Coursework 3 units; Research work 6 units Programme Structure Core Courses in the MSc Programme MIT 801 Research Methods 4 MIT 802 Industrial and Quality management 4 MIT 803 Computing Techniques and Applications 2 MIT 899 Thesis 19 Required Courses in the MSc Programme MTE 811 Fibre and Yarn Techniques 4 MTE 821 Fabric Techniques 4 MTE 832 Processing Techniques 4 Elective Courses in the MSc Programme MIT 810E Composite Mechanics 3 MIT 813E Fibre Reinforced Composites 3 MTE 821E Industrial and Speciality Textile 3 MIT 822E Computer Aided Design and Manufacture 4 MTE 826E Knitted Structures 3 MIT 832E Industrial and Manufacturing Systems 3 291

21 Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) MIT 838E Modern Manufacturing Techniques 3 MIT 841E Environmental Impact Assessment and Audit 3 MIT 844E Operations Management 3 MIT 845E Marketing Management 3 MIT 847E Management of Technology 3 MIT 849E Cleaner Production 3 Examination Regulations The University Common Regulation for MSc examination and School of Engineering specific regulations shall apply Except for the courses indicated in (d) and (e) below, each course shall be examined by a three-hour examination paper at the end of the semester, in addition to other forms of assessment The marks distribution under (b) will be as follows: End of Semester Examination 60% Continuous Assessment 40% Courses to be examined through continuous assessment and reports only: MIT 801, MIT 803, MIT 822E For the courses MTE 811, MTE 821, MTE 832 and MIT 841E, the distribution of marks shall be as follows: End of Semester Examination 40% Project Report 40% Continuous Assessment in the Form of Sit-in Tests 20% Master of Science in Chemical Engineering The main objectives of the MSc programme are to: Prepare specialised engineers in chemical engineering who would strengthen the engineering, design and research capability in the broad discipline of chemical engineering in the country. Stimulate applied research to lead the country towards self sufficiency in research and development in chemical engineering discipline. Develop professional ethics and consultancy capacity in chemical engineering. Entry Requirements The following are eligible for admission: Graduates with a minimum of Second Class Honours (lower division) Bachelor s degree in Chemical & Process Engineering from Moi University. Holders of a minimum Second Class Honours degree in Chemical & Process Engineering from an accredited university recognised by Moi University Senate. Graduates with a minimum of Second Class Honours Bachelors degree in related engineering disciplines from Moi University, or any other accredited institution recognised by the Moi University Senate. Such candidates may be required to undertake undergraduate prerequisite course(s). The Department as per the candidate s academic background and work experience would determine these course(s). Programme Structure Year 1 Semester 1 Course Title Units CHP 811 Transport Phenomena 3 CHP 813 Separation Processes 3 CHP 815 Reactor Engineering 3 CHP 817 Research Methodology 2 Elective I 3 Total 14 CHP 822 Chemical Engineering Thermodynamics 3 CHP899 Project (Research Proposal seminar) 2 Elective II 3 Elective III 3 Elective IV 3 Total 14 Year 2 292