EUSNCO309 (SQA Unit Code - FA9F 04) Monitor the installation process for Network Construction Operations
|
|
|
- Cody Farmer
- 10 years ago
- Views:
Transcription
1 Monitor the installation process for Network Construction Operations Overview This unit is designed for the candidate to demonstrate the effectiveness of the installation and construction process by monitoring resource use, installation and construction methods and procedures, and outputs achieved, against relevant specifications and ensuring compliance with relevant regulations and guidelines. The candidate will need to identify any variations from agreed plans and schedules and/or any problems with the installation and construction process and ensure that corrective action is taken promptly. The candidate will need knowledge of installation and construction principles and processes and both general and discipline-specific engineering principles and processes. The candidate will need to know how to interpret specifications and be familiar with health, safety, environmental and other legislative and regulatory frameworks. The candidate will also need sound knowledge of organisational procedures and systems and problem-solving methods, as well as a good grasp of the principles and systems behind effective quality assurance and resource management. This unit will apply to Network Construction Operations at Level 3 and is intended for Construction Supervisors. EUSNCO309 1
2 Performance criteria You must be able to: P1 monitor the installation and construction methods and procedures at suitable opportunities P2 monitor the supply and use of resources to ensure that they are effectively used P3 confirm that the equipment, materials and products used during the installation and construction methods and procedures comply with approved procedures and practices P4 confirm that suitable installation and construction methods and procedures have been used P5 identify any variations from agreed plans and schedules P6 ensure that any problems with the installation and construction methods and procedures are identified and solved promptly P7 ensure that the outputs of the installation and construction methods and procedures comply with approved procedures and practices P8 ensure that the installation and construction methods and procedures complies with all relevant approved procedures and practices EUSNCO309 2
3 Knowledge and understanding You need to know and understand: K1 when should monitoring occur, and how should it be undertaken K2 what are the installation and construction methods and procedures that should be used K3 what are the potential variations from plans and schedules that might occur during installation and construction K4 what types of problem could occur K5 why it is important to solve a problem quickly K6 how to check the outputs of the installation and construction process K7 how to obtain information on resources K8 what resources are necessary K9 what resources are available K10 what are the regulations and guidelines that are relevant K11 how to obtain information on regulations and guidelines EUSNCO309 3
4 Additional Information Scope/range related to performance criteria 1. installation and construction methods and procedures: including work by self and others, involving site, equipment, materials and other resources 2. assembly of fittings, pipework and ancillaries positioning and jointing including connections in accordance with industry standards 3. resources: plant, equipment, materials, labour, consumables 4. equipment, materials and products: Selection of vehicles, tools, ancillary equipment and machines, valves and fittings, pipes and consumables, health, safety and environmental protection equipment, hazardous and non hazardous materials 5. approved procedures and practices: Health, Safety and Environmental related to the individual and others, organisational, regulatory, statutory, emergency, operational, contingency plans, relevant company policies, relevant client policies (internal or external) approved materials and equipment and procedures, and risk assessments EUSNCO309 4
5 Developed by Energy and Utility Skills Version number 1 Date approved 2010 Indicative review date Validity Status Originating organisation Original URN Relevant occupations Suite Key words 2015 Current Original Energy and Utility Skills NCO309 Engineering and manufacturing technologies; Engineering Network Construction Operations Material, products, regulatory frameworks EUSNCO309 5
SFJ ZI02 Monitor and review the performance of technical support systems and equipment
Monitor and review the performance of technical support systems and Overview This unit covers monitoring and reviewing the performance of systems and i.e. common and complex audio, video and communication
FSPFCC04(SQA Unit Code-F88P 04) Ensure you comply with regulations in your financial services environment
Ensure you comply with regulations in your financial services Overview This Standard is about working within the regulatory of the financial services industry. Most organisations within financial services
LMTCL4002A Assemble and fit commercially tailored or bespoke garments
LMTCL4002A Assemble and fit commercially tailored or bespoke garments Revision Number: 1 LMTCL4002A Assemble and fit commercially tailored or bespoke garments Modification History Not applicable. Unit
ASTFM320 Disaster recovery and contingency planning
Overview This unit is for first-line managers/supervisors at work in the FM environment. It is concerned with managing disaster recovery and contingency planning in your area of responsibility. This unit
Advanced Diploma of Integrated Risk Management FNS60811 Description
Advanced Diploma of Integrated Risk Management FNS60811 Description This qualification provides cross-industry competencies for experienced risk managers and covers risk management activities undertaken
COSCSMO10 - SQA Unit Code FM1W 04 Implement strategic sourcing partnerships
Overview This Unit is about identifying and agreeing with the stakeholders what systems are most effective for managing the project. The systems identified will need to be prioritised and formalised if
COSVR404 Erect and dismantle plant (cranes and rigs)
Overview This standard is about interpreting information, adopting safe, healthy and environmentally responsible work practices, selecting materials, components, plant, tools and ancillary equipment, preparing
KEY RESPONSIBILITIES:
1. TITLE: FIELD MAINTENANCE MANAGER 2. CLASSIFICATION: SENIOR EXECUTIVE OFFICER (SEO) 3. DEPARTMENT: OPERATIONS 4. POSITION OBJECTIVES: 4.1. Objectives of Position: 4.1.1. To manage and provide direction
PPLAGSO11 Carry Out a Physical Search in the Aviation Security Environment
Carry Out a Physical Search in the Aviation Security Environment Overview This unit is about carrying out a physical search in the aviation security environment, which may include a manual search of a
Overview PPLHSL14. Manage the receipt, storage or dispatch of goods
Overview This standard is about managing the receipt, storage or dispatch of goods. This standard is for hospitality team leaders, first line managers or supervisors. The logistics chain from goods arriving,
SFJFRSFF2 SQA Unit Code (FA6J 04) Take responsibility for effective performance in fire and rescue
Overview The standard is recommended for firefighters, control room staff, and others with a remit for community safety within fire and. This standard is about making a positive contribution to the work
Financial Services Core Competences
The Sector Skills Council for financial services, accountancy and finance National Occupational Standards for the Financial Services Sector Financial Services Core Competences Final version approved September
Overview SFLOLC1. Develop and implement a management system to ensure
compliance Overview What this standard is about This standard is about developing and implementing a management system to ensure compliance with the requirements of the operator's licence for freight transport.
Unit ID: 482 Domain AUTOMOTIVE ELECTRICAL AND ELECTRONICS Title: Install and repair electrical lighting system of vehicles Level: 2 Credits: 6
Unit ID: 482 Domain AUTOMOTIVE ELECTRICAL AND ELECTRONICS Title: Install and repair electrical lighting system of vehicles Level: 2 Credits: 6 Purpose This unit standard specifies the competencies required
FSPBA8 SQA Unit Code H5FA 04 Process the transfer of foreign currency
Overview This unit is about your ability to process the transfer of all types of foreign currency in accordance with your organisation's requirements. You will need to operate currency accounts and arrange
SEMBIT3-14 - SQA Unit Code F9HR 04 Applying policy deployment (Hoshin Kanri, Quality Operating Systems, Business Plan Deployment)
Applying policy deployment (Hoshin Kanri, Quality Operating Systems, Overview This unit covers the competences required for applying policy deployment (Hoshin Kanri, Quality Operating Systems,. It involves
Overview TECHIS60241. Carry out risk assessment and management activities
Overview Information in all its forms is a vital component of the digital environment in which we live and work. The protection of information in its physical form is well understood but the protection
Level 1 Certificate in Network Construction Operations - Gas (6028-10)
Level 1 Certificate in Network Construction Operations - Gas (6028-10) Learner logbook www.cityandguilds.com January 2013 Version 2.0 Qualification title Number QAN Level 1 Certificate in Network Construction
Contact Centre. National Occupational Standards May 2011
Contact Centre National Occupational Standards May 2011 Skills CFA 6 Graphite Square, Vauxhall Walk, London SE11 5EE T: 0207 0919620 F: 0207 0917340 [email protected] www.skillscfa.org 2012 Skills CFA
BSBMGT515A Manage operational plan
BSBMGT515A Manage operational plan Release: 1 BSBMGT515A Manage operational plan Modification History Not applicable. Unit Descriptor Unit descriptor This unit describes the performance outcomes, skills
ASTFFL6 - SQA Unit Code H54H 04 Prepare for flood damage emergencies
Overview 1 2 3 ASTFFL6 1 Performance criteria P1 P2 P3 confirm that you have the correct tools and equipment for the type of flood emergency you are likely to encounter confirm that you are authorised
Release: 1. CPP20307 Certificate II in Technical Security
Release: 1 CPP20307 Certificate II in Technical Security CPP20307 Certificate II in Technical Security Modification History Description Pathways Information Licensing/Regulatory Information Entry Requirements
ASTFFL1 - SQA Unit Code H54C 04 Respond to requests for fire damage limitation work
Overview This standard is about responding to requests for fire damage limitation work. It includes confirming the details of fire damage limitation jobs, agreeing an initial plan of action and making
AURC465349B Prepare a vehicle repair quotation
AURC465349B Prepare a vehicle repair quotation Release: 1 AURC465349B Prepare a vehicle repair quotation Modification History Not Applicable Unit Descriptor Unit descriptor This unit of competency describes
SFS SYS 6 (SQA Unit Code - H4GK 04) Plan the installation of electronic security systems
Overview This NOS sets out the skills, knowledge and understanding for you to confirm relevant information required about electronic security systems and sites to plan and co-ordinate installations. This
SEMETS3-70 Performing engineering software safety assessments
Performing engineering software safety assessments Overview This unit identifies the competences you need to perform a software safety assessment as part of the product definition activity, in accordance
Release: 2. SIS40410 Certificate IV in Sport and Recreation
Release: 2 SIS40410 Certificate IV in Sport and Recreation SIS40410 Certificate IV in Sport and Recreation Modification History Not Applicable Description This qualification provides the skills and knowledge
ESKIPU1 Improving productivity using IT
Overview This is the ability to plan, evaluate and improve procedures involving the use of IT tools and systems in order to improve the productivity and efficiency of tasks and activities. ESKIPU1 1 Performance
OCCUPATIONAL HEALTH AND SAFETY POLICY: INCIDENT AND INJURY REPORTING ERJ 6.28.1
OCCUPATIONAL HEALTH AND SAFETY POLICY: INCIDENT AND INJURY REPORTING ERJ 6281 INTRODUCTION The Edmund Rice Justice Aotearoa New Zealand Trust recognises that the health and safety of its employees is a
Release: 1. CUL40111 Certificate IV in Library, Information and Cultural Services
Release: 1 CUL40111 Certificate IV in Library, Information and Cultural Services CUL40111 Certificate IV in Library, Information and Cultural Services Modification History Release Release 1 Comments This
Revision Number: 1. BSB41507 Certificate IV in Project Management
Revision Number: 1 BSB41507 Certificate IV in Project Management BSB41507 Certificate IV in Project Management Modification History Not applicable. Approved Page 2 of 6 Description Descriptor This qualification
BSBCCO501B Develop business continuity strategy
BSBCCO501B Develop business continuity strategy Release 2 BSBCCO501B Develop business continuity strategy Modification History Release Release 2 Comments New release of this Unit with version 7.0 of BSB07
CFAMLE6 Ensure health and safety requirements are met in your area of responsibility
Ensure health and safety requirements are met in your area of Overview This unit is concerned with managing the overall health and safety process in your area of. It is intended to go beyond meeting health
PROMG4 Install mining backup services
Overview This standard is about: 1 interpreting information 2 adopting safe and healthy working practices 3 selecting materials, components and equipment 4 preparing, installing, using and removing below
SFJPE1.3 Evaluate the effectiveness of the operational delivery business process
Evaluate the effectiveness of the operational delivery business process Overview This standard concerns evaluating the effectiveness of new and adapted business processes. The scope of work needs to address
ASTFFL2 - SQA Unit Code H54D 04 Assess and estimate work required to limit damage to structures post fire
Assess and estimate work required to limit damage to structures post Overview 1 Confirm extent and nature of damage caused to structures by 2 Carry out risk assessments to confirm premises are safe to
Release: 1. RIIBEF602A Establish and evaluate operational performance management systems
Release: 1 RIIBEF602A Establish and evaluate operational performance management systems RIIBEF602A Establish and evaluate operational performance management systems Modification History Not applicable.
ESKITP5023 Software Development Level 3 Role
Overview This sub discipline covers the core competencies required to create software to address the needs of business problems and opportunities, resulting in a variety of software solutions, ranging
BSBINM501A Manage an information or knowledge management system
BSBINM501A Manage an information or knowledge management system Release: 1 BSBINM501A Manage an information or knowledge management system Modification History Not applicable. Unit Descriptor Unit descriptor
Release: 1. AURT575393A Analyse and evaluate electrical and electronic faults in transmission/driveline systems
Release: 1 AURT575393A Analyse and evaluate electrical and electronic faults in transmission/driveline systems AURT575393A Analyse and evaluate electrical and electronic faults in transmission/driveline
SCDHSC0393 Promote participation in agreed therapeutic group activities
Promote participation in agreed therapeutic group activities Overview This standard identifies the requirements when you promote participation in agreed therapeutic group activities. This includes planning
AS/NZS 4801:2001. Safety Management Systems (SMS) Self-Assessment Checklist. Revision 1 (January 2014)
AS/NZS 4801:2001 Safety Management Systems (SMS) Self-Assessment Checklist This document restates the requirements of AS/NZS 4801:2001 for Safety Management Systems (SMS) and has been developed to assist
ICA60311 Advanced Diploma of Information Technology Business Analysis
ICA60311 Advanced Diploma of Information Technology Business Analysis Release: 1 ICA60311 Advanced Diploma of Information Technology Business Analysis Modification History Release Release 1 Comments This
Job function. Offshore safety adviser/coach. Activity
AB Information Note IMCA C 08/10 Competence of Offshore Safety Advisers The role of an offshore safety adviser is fundamental to the operations of many member companies, providing both an onshore and offshore
ESKITP714601 Authorise strategy, policies and standards relating to IT service delivery performance metrics management
service delivery performance metrics Overview This sub-discipline covers the competencies required to direct the monitoring, analysis and communication of IT service delivery performance metrics. Monitoring
QUALITY ASSESSMENT & IMPROVEMENT. Workforce ACUTE HOSPITAL SERVICES. Supporting services to deliver quality healthcare JUNE 2013
QUALITY ASSESSMENT & IMPROVEMENT ACUTE HOSPITAL SERVICES JUNE 2013 Workforce Supporting services to deliver quality healthcare Effective Care and Support Safe Care and Support Person Centred Care and
National Occupational Standards for Health & Safety Stand Alone Units. Unit HSS8: Review health & safety procedures in workplaces
Unit HSS8: Review health & safety procedures in workplaces This unit is for a person required to review health and safety conditions in workplaces other than their own. This unit is about: Preparing to
Construction Crafts: Plumbing of Sanitary Appliances (Intermediate 2)
National Unit Specification: general information CODE DX0T 11 COURSE Construction Crafts SUMMARY This Unit is an optional Unit within the Intermediate 2 Construction Crafts Course and has been designed
BSB51312 Diploma of Work Health and Safety
BSB51312 Diploma of Work Health and Safety Release: 1 BSB51312 Diploma of Work Health and Safety Modification History Release Release 1 Comments This Qualification first released with BSB07 Business Training
SEMFWE232 SQA Unit Code H2BN 04 Cutting plate and sections using shearing machines
Overview This standard identifies the competencies you need for cutting and shaping metal plate and sections (3 mm thickness and above) for fabrications using guillotines and section cropping machines,
Revision Number: 2. BSB50407 Diploma of Business Administration
Revision Number: 2 BSB50407 Diploma of Business Administration BSB50407 Diploma of Business Administration Modification History Release Release 2 Comments New release of this Qualification released with
BSB51407 Diploma of Project Management
BSB51407 Diploma of Project Management Revision Number: 1 BSB51407 Diploma of Project Management Modification History Not applicable. Approved Page 2 of 7 Description Descriptor This qualification reflects
Qualification Outline
Qualification Outline Diploma of Management BSB51107 Get it done. Get it done well Web: www.kneedeep.com.au/certification.html Phone: +61 8 7127 4885 Email: [email protected] Address: Suite 203, Level
CONSTRUCTION HEALTH AND SAFETY, AND INJURY PREVENTION Research and develop accident and incident investigation procedures on construction sites
1 of 7 level: 4 credit: 4 planned review date: December 2003 sub-field: purpose: Construction People credited with this unit standard are able to: research accident and/or incident investigation and reporting
SEMETS3-68 Performing engineering software configuration management
Performing engineering software configuration management Overview This unit identifies the competences you need to perform software configuration management activities, from initial product definition
ICTSMB4160A Set up and operate a contractor business Unit descriptor
ICTSMB4160A Set up and operate a contractor business ICTSMB4160A Unit descriptor Employability skills Prerequisite units Set up and operate a contractor business This unit describes the performance outcomes,
LSICLG18 Interpret and apply ethical and legal frameworks in the practice of counselling
Interpret and apply ethical and legal frameworks in the practice of Overview This unit is working within ethical and legal frameworks and analysing and solving any ethical dilemmas. It encourages you to
Health and safety policy
1. General statement of intent The Company recognises and accepts its responsibilities as an employer to ensure, so far as is reasonably practicable, the health, safety and welfare of its employees and
Release: 1. BSBWHS508 Manage WHS hazards associated with plant
Release: 1 BSBWHS508 Manage WHS hazards BSBWHS508 Manage WHS hazards Modification History Release Release 1 Comments This version first released with BSB Business Services Training Package Version 1.0.
Occupational Health & Safety Policy Injury & Incident Reporting
Occupational Health & Safety Policy Injury & Incident Reporting Policy number 46 Version 1 Approved by board on 6 June 2014 Responsible person President Review date June 2016 Introduction Living Positive
BSB40415 CERTIFICATE IV in SMALL BUSINESS MANAGEMENT
BSB40415 CERTIFICATE IV in SMALL BUSINESS MANAGEMENT This qualification is suitable for small business managers who use well developed skills and a broad knowledge base to solve a defined range of unpredictable
PLUMBER Training Needs Assessment Evaluation Form. Personal/Position Information
Personal/Position Information Name: Period Covered: Position: Reviewed by: Title: Position Start Date: Community: Region: Page 1 Instructions: The information contained in this evaluation is strictly confidential.
Release 1. BSBWHS508A Manage WHS hazards associated with plant
Release 1 BSBWHS508A Manage WHS hazards associated with plant BSBWHS508A Manage WHS hazards associated with plant Modification History Release Release 1 Comments This Unit first released with BSB07 Business
BSB41407 Certificate IV in Occupational Health and Safety
BSB41407 Certificate IV in Occupational Health and Safety Revision Number: 2 BSB41407 Certificate IV in Occupational Health and Safety Modification History Release Release 2 Comments New release of this
SFS SYS 7 (SQA Unit Code - H4GL 04) Audit electronic security systems
Overview This NOS sets out the skills, knowledge and understanding for you to carry out audits of electronic security systems to confirm system compliance with operational requirements and legislation,
CCF Systems Gap Analysis Checklist. Civil Contractors Federation. Civil Construction Management Code
CCF Systems Gap Analysis Checklist Civil Contractors Federation Civil Construction Management Code Please Note: This Gap Analysis Checklist is designed to enable Contractors to undertake an initial self
Release: 1. SIS30313 Certificate III in Fitness
Release: 1 SIS30313 Certificate III in Fitness SIS30313 Certificate III in Fitness Modification History The version details of this endorsed qualification are the table below. The latest information is
IMIAEMEI03 Repair and overhaul motor vehicle electrical units
Overview This unit is about the off vehicle repair and overhauling of electrical units and components. IMIAEMEI03 1 Performance criteria You must be able to: P1 wear suitable personal protective equipment
Construction and Civil Work Management
STANDARD LME-12:001901 Uen Rev A Contents 1 Introduction... 3 2 Definitions... 3 3 Requirements... 4 3.1 General... 4 3.2 Responsibilities... 4 3.3 OHS Safety Plan... 5 3.4 Start of Construction Phase...
Release: 1. AURTTM001 Operate and monitor computer numerical control machines
Release: 1 AURTTM001 Operate and monitor computer numerical control machines AURTTM001 Operate and monitor computer numerical control machines Modification History Release Release 1 Comment New unit of
FSPAMFPI06 Complete reports for mortgage and/or financial planning clients
Complete reports for mortgage and/or financial planning clients Overview You must be able to accurately complete reports of a complex nature, and take a proactive approach to the preparation of valuations
JOB DESCRIPTION. To work flexibly and contribute to continuous improvement of services provided by the Department.
JOB DESCRIPTION Post Title: Employer: Responsible To: HR Advisor [Maternity Cover] Hafod Corporate Services Ltd Head of HR MAIN OBJECTIVES OF THE POST To support the Head of HR in providing a proactive,
MEM18084A Commission and decommission split air conditioning systems
MEM18084A Commission and decommission split air conditioning systems Release: 1 MEM18084A Commission and decommission split air conditioning systems Modification History Not Applicable Unit Descriptor
SCDHSC0032 Promote health, safety and security in the work setting
Promote health, safety and security in the work setting Overview This standard identifies the requirements when you promote the health, safety and security of yourself and others for whom you are responsible
Level 2 NVQ in Warehousing and Storage (1009)
Level 2 NVQ in Warehousing and Storage (1009) Candidate logbook QCA number - 500/4022/4 www.cityandguilds.com June 2008 Version 1.0 About City & Guilds City & Guilds is the UK s leading provider of vocational
RECOGNITION OF PRIOR LEARNING GUIDE. FNS40804 Certificate IV in Financial Services (Finance/Mortgage Broking)
RECOGNITION OF PRIOR LEARNING GUIDE FNS40804 Certificate IV in Financial Services (Finance/Mortgage Broking) Contents RECOGNITION OF PRIOR LEARNING GUIDE... 1 1 Introduction... 4 2 Important Conditions...
BSB41407 Certificate IV in Occupational Health and Safety
BSB41407 Certificate IV in Occupational Health and Safety Revision Number: 2 BSB41407 Certificate IV in Occupational Health and Safety Modification History Release Release 2 Comments New release of this
Release: 1. MSS405062A Develop a documentation control strategy for an organisation
Release: 1 MSS405062A Develop a documentation control strategy for an organisation MSS405062A Develop a documentation control strategy for an organisation Modification History New unit, superseding MSACMT662A
HEAD MECHANIC Training Needs Assessment Evaluation Form. Personal/Position Information
HEAD MECHANIC Personal/Position Information Name: Period Covered: Position: Reviewed by: Title: Position Start Date: Community: Region: HEAD MECHANIC Instructions: The information contained in this evaluation
Understanding Principles and Concepts of Quality, Safety and Environmental Management System Graham Caddies
Understanding Principles and Concepts of Quality, Safety and Environmental Management System Graham Caddies Owner / Principal Advance Profitplan Understanding Principles & Concepts Page 1 of 10 Revision