Training Academy. Course Handbook Certified and Informational Courses for effective Asset Care Management

Transcription

1 Training Academy Course Handbook 2015 Certified and Informational Courses for effective Asset Care Management ALS Training Academy Course Handbook

2 Our vision To increase the understanding and application of effective Asset Care management, by providing training services to our clients and industry. Asset Care is a process of evaluating the health of an industrial plant or equipment, monitoring its condition and using the data gained to make decisions. These decisions can optimise production, extend asset life, ensure safe operation and minimise maintenance costs. Recognition We are an Approved Training Body with AINDT, allowing us to provide recognised training toward AINDT certification. We are also an examination centre for Condition Monitoring and are in the process of becoming an Authorised Qualifying Body (AQB) in time for the launch of our training that will allow us to conduct both CM and NDT examinations as part of our offering. What s inside Why choose ALS Training Academy for your training needs?... 1 Training Locations... 2 Certified Courses... 2 Magnetic Particle Testing Level Penetrant Testing Level Ultrasonic Plate and Thickness Testing... 6 Ultrasonic Testing of Welds Level Vibration Analysis Level Vibration Analysis Level Informational Courses Classified Plant Management and Inspection NDT Methods and Applications Oil Analysis Reliability Based Condition Monitoring Schedule of Rates Enrolment Form ALS Training Academy Course Handbook 2015

3 Why choose ALS Training Academy for your training needs? By choosing ALS as your training provider you will have selected a company that values your learning experience. To ensure you have the best chance of success in your course, we adopt modern training principles that focus on your learning needs. We offer: $ Competitive Pricing Training is an investment in the future. We understand the need for wise investments, and have endeavoured to provide you with high quality courses at very reasonable rates. Avoid the frustration of paying for prerequisite courses. When you enrol in our courses you will also receive access to relevant prerequisite courses and additional support. Pre and Post-Course Support As soon as your enrolment is approved, you will get access to our online training system until six months after the course date. Our online system provides you with access to our discussion forums. Your will have access to others that have participated in the course and to our trainers and presenters. Quality Learning Environment Our training facilities have been developed to provide you with a first class experience. You will be in a comfortable relaxed environment to enhance your learning experience. When learning practical skills, you can be sure that you will have the equipment you need to get enough practical hands-on time to develop your skills. Experienced and Enthusiastic Trainers and Presenters Our trainers are highly qualified and experienced. You can rest assured that their wealth of experience will provide you with both an enjoyable, and educational experience. ALS has a large number of highly qualified and experienced practitioners. We have identified the best of the best as the presenters of our Informational Courses. Our presenters have a deep understanding of the content, vast on the job experience and strong presentation and communication skills. After benefiting from their years of experience and expertise you will come away with a much greater insight and understanding to apply in your workplace. ALS Training Academy Course Handbook

4 Training Locations ALS Training Centres We have developed our training centres to accommodate the needs of both our informational and certified courses. You will learn both theory and practical in comfort at these dedicated sites. Two main centres can cater for all of our courses: Perth, WA 109 Bannister Road Canning Vale, WA 6155 Brisbane, QLD 7 Brisbane Road Riverview, QLD 4303 We also provide training at a number of our other branches including: Gladstone, QLD 4 Beckinsale Street Gladstone, QLD 4680 Melbourne, VIC 450 Dynon Road West Melbourne, VIC 3003 On site Solution at your premises. If you would prefer us to come to you we are happy to accommodate where possible. Talk to us about your requirements so that we can determine how we can best meet your needs. Sydney, NSW 2/ Newton Road Wetherill Park, NSW 2161 Virginia, QLD 41 Yarraman Place, Virginia, QLD 4014 Wellington, NZ 74 Seaview Road Lower Hutt, Wellington Certified Courses These types of courses are recognised by AINDT and can be used towards certification. The courses we currently provide include: Magnetic Particle Testing Level 2 (MT2 Multisector) We ensure that our people providing these courses are suitably qualified and experienced trainers. Penetrant Testing Level 2 (PT2 Multisector) Ultrasonic Plate and Thickness Testing (UT level 1) Ultrasonic Testing of Welds (UT2 - Welds) Vibration Analysis Level 1 (VA1) Vibration Analysis Level 2 (VA2) 2 ALS Training Academy Course Handbook 2015

5 Certification Certifications are used to demonstrate a person s competence against set criteria. AINDT is the Australian National Certification Body, providing certification in accordance with AS ISO 9712 and ISO This means that if you become certified through AINDT, you will receive a certification that verifies that you have fulfilled the requirements of those relevant standards. Certifications like those issued by AINDT have expiry dates. AINDT certifications expire after 5 years, thereby requiring you to re-certify and demonstrate your ongoing competence. Why become certified? Demonstrate your competence Have an independent body evaluate your competence Meet employer / client requirements Improve your profile and job prospects How to get your certification With AINDT the requirement varies slightly depending on what you are trying to become certified in, as specified in two guidelines published by AINDT called Guide to Qualification and Certification for NDT and CM. Below is a list outlining the requirements for NDT and CM certification: Successful completion of approved training Pass AINDT examinations Completion of a visual acuity test (applicable to NDT) Evidence of practical experience using the relevant method Completed certification application form Complete an interview (only applicable for CM, this is organised after you apply for certification) How ALS Training Academy can help you Our certified training courses have been developed specifically to help you acquire the knowledge and skills you require to become a competent technician. During each course you can: Complete your AINDT approved training course Sit your AINDT examinations Complete a Visual Acuity test Complete a certification application form Our trainers are happy to help you complete your AINDT certification application form and talk you through the process. When applying for certification please remember that AINDT is the certification body that determines if you meet the certification requirement, not ALS Training Academy. But we are there to help you where we can. What do you get? We want your experience to be as painless as possible, so everything you will need to complete the course is provided. Your course enrolment includes: Full training course (lunch and morning tea provided) Training course certificate upon completion (recognised by AINDT) Participation in AINDT certification examinations Student Textbook Student Workbook Access to our online version of the course and prerequisite materials for 6 months: Participation in our online discussion group When attending our certified courses, you should wear a long sleeved shirt and enclosed shoes. We will provide you with any other safety equipment that you require. What can you expect? Once you enrol in our course, you will receive access to our online courses, including the prerequisite courses. We will contact you to confirm your enrolment and discuss prerequisite exemptions if required. We will provide you with further details about your training and send you reminders leading up to your training. During the course our talented trainers will keep you engaged in learning through plenty of practical work, activities, and demonstrations. As there is a lot to learn before the exams, you will be provided with study material that you can complete outside of the classroom. On the final day you will put your knowledge and skills to the test, when you undertake the AINDT theory and practical certification examinations. We know that learning doesn t stop when your training course is over. You can access our online materials for 6 months and be a part of our trainer led discussion group. ALS Training Academy Course Handbook

6 Magnetic Particle Testing Level 2 (MT2 Multisector) CERTIFIED COURSE Description This course is intended to provide you with knowledge and skills on the widely used method of Magnetic Particle Testing (MT). This method of Non-Destructive Testing (NDT) is highly efficient in identifying surface or near-surface discontinuities in parts and components made of ferromagnetic material. The Magnetic Particle Testing course will provide you the theoretical understanding of magnetism and how it applies to NDT. You will acquire the skill and knowledge on selection and application of different magnetisation techniques as well as, interpretation and evaluation of indications. Those discontinuities which were hidden from the eyes become visible for judgment and required corrective action. It is important that once you complete your training you can apply your new knowledge and skills in real life situations. The goal of this course is to provide you with not only the how but also the why aspects to Magnetic Particle Testing. By knowing why you need to undertake certain processes, you will understand their importance and what to do when you re faced with scenarios you have not seen before. Key Learning Outcomes By the end of this course, you will be able to: Demonstrate an understanding of the key elements of the use of MT, including: Magnetism and magnetic fields Methods of magnetisation Magnetic particle testing equipment Magnetic media and methods Safety considerations and system control Interpretation and evaluation of indications Recording and reporting requirements Magnetic particle testing related code and standards Writing magnetic particle testing instruction Conduct: MT using electromagnetic yokes Tests using fluorescent and non-fluorescent media MT on magnetic bench using different techniques Instruction writing for different testing scenarios Prerequisites To complete this course successfully, you will need to have materials knowledge and the ability to complete basic algebra. As we want you to have a positive course experience, when you enrol into this course we will give you access to our online courses: Mathematics for Basic Methods Materials Who Should Attend This course is designed for anyone that wants to learn how to conduct magnetic particle testing. While prior experience using this method is beneficial, it is not a prerequisite. If you want to become certified, you will need to gain the relevant practical experience before applying for certification. Duration 5 Days Course Fee $2,400 (includes GST & exam fee) Other courses you might be interested in Ultrasonic Plate and Thickness Testing Ultrasonic Testing of Welds Penetrant Testing NDT Methods and Application 4 ALS Training Academy Course Handbook 2015

7 Penetrant Testing Level 2 (PT2 Multisector) CERTIFIED COURSE Description Penetrant testing (PT) is one of the common Non-Destructive Testing (NDT) methods utilised to find discontinuities open to the surface. This method employs different chemicals and processes to get a visible indication from surface-breakings in non-porous materials such as metals, plastics, glass, etc. In this method tiny surface discontinuities which are not detectable by visual inspection show colourful indications. The Penetrant Testing course will provide you with the theoretical understanding of penetrant and development systems and how they apply to NDT. You will acquire the skill and knowledge of the selection and application of different penetrant and development techniques, as well as the interpretation and evaluation of indications. In this course you will not only apply the techniques, but also write work instructions for different testing scenarios. It is important that once you complete your training you can apply your new knowledge and skills in real life situations. The goal of this course is to provide you with not only the how but also the why aspects to Penetrant Testing. By knowing why you need to undertake certain processes, you will understand their importance and what to do when you re faced with scenarios you have not seen before. Key Learning Outcomes By the end of this course, you will be able to: Demonstrate an understanding of the key elements of the use of PT, including: Penetrant principles Penetrant system media Penetrant testing methods and application Safety considerations and system control Interpretation and evaluation of indications Recording and reporting requirements Penetrant testing related codes and standards Writing penetrant testing instruction Conduct: PT using fluorescent and non-fluorescent media PT using solvent removable and water washable techniques Instruction writing for different testing scenarios Prerequisites To complete this course successfully, you will need to have materials knowledge and the ability to complete basic algebra. As we want you to have a positive course experience, when you enrol into this course we will give you access to our online courses: Mathematics for Basic Methods Materials Who Should Attend This course is designed for anyone that wants to learn how to conduct penetrant testing. While prior experience using this method is beneficial, it is not a prerequisite. If you want to become certified, you will need to gain the relevant practical experience before applying for certification. Duration 5 Days Course Fee $2,400 (includes GST & exam fee) Other courses you might be interested in Ultrasonic Plate and Thickness Testing Ultrasonic Testing of Welds Magnetic Particle Testing NDT Methods and Application ALS Training Academy Course Handbook

8 Ultrasonic Plate and Thickness Testing (UT level 1) CERTIFIED COURSE Description Ultrasonic testing is an efficient inspection method used widely to assist in the monitoring and maintenance of industrial facilities. This Ultrasonic Plate and Thickness Testing (UTT) course will provide you with the theoretical understanding of ultrasound and how it applies to Non-Destructive Testing (NDT). This knowledge and skill will be your key-stone as you learn how to correctly determine material thickness and recognise anomalies. You will then apply these principles to plate inspection, where you will locate a variety of hidden internal discontinuities. It is important that once you complete your training you can apply your new knowledge and skills in real life situations. The goal of this course is to provide you with not only the how but also the why aspects to ultrasonic plate and thickness testing. By knowing why you need to undertake certain processes, you will understand their importance and what to do when you re faced with scenarios you have not seen before. Key Learning Outcomes By the end of this course, you will be able to: Demonstrate an understanding of the key elements of the use of ultrasound in NDT, including: Properties and behaviours of ultrasound Generation of ultrasound Ultrasonic testing equipment Testing methods and calibration Application of UTT variables that can impact test results Ultrasonic thickness and plate testing techniques Ultrasonic thickness testing related codes and standards Recording and reporting requirements Conduct: UTT equipment calibrations Interpret digital and A-scan displays Thickness measurements Plate scans Prerequisites To complete this course successfully, you will need to have materials knowledge and the ability to complete basic algebra. As we want you to have a positive course experience, when you enrol into this course we will give you access to our online courses: Mathematics for Basic Methods Materials Who Should Attend This course is designed for anyone that wants to learn how to conduct ultrasonic plate and thickness testing. While prior experience using this method is beneficial, it is not a prerequisite. If you want to become certified, you will need to gain the relevant practical experience before applying for certification. Duration 5 Days Course Fee $2,400 (includes GST & exam fee) Other courses you might be interested in Ultrasonic Testing of Welds Magnetic Particle Testing Penetrant Testing NDT Methods and Application 6 ALS Training Academy Course Handbook 2015

9 Ultrasonic Testing of Welds Level 2 (UT2 Welds) CERTIFIED COURSE Description Ultrasonic testing is an advanced method of Non-Destructive Testing (NDT) involved with the detection of internal discontinuities in welded components. This Ultrasonic Testing of welds (UT2 Welds) course will extend your knowledge and ability of Ultrasonic Plate and Thickness Testing to the application of shear waves in weld scanning. This upgrade of knowledge and skill will be your foundation as you learn how to correctly scan different configurations of welded components and determine the type, location and size of internal discontinuities. It is important that once you complete your training you can apply your new knowledge and skills in real life situations. The goal of this course is to provide you with not only the how but also the why aspects to Ultrasonic Testing. By knowing why you need to undertake certain processes, you will understand their importance and what to do when you re faced with scenarios you have not seen before. Key Learning Outcomes By the end of this course, you will be able to: Demonstrate an understanding of the key elements of the use of ultrasound in NDT of welds, including: Sound wave theory Reflection and refraction Ultrasonic testing equipment Testing methods and calibration Ultrasonic shear wave probes Ultrasonic weld scanning techniques Ultrasonic weld testing related codes and standards Recording and reporting requirements Conduct: UT equipment calibrations Weld scanning, interpretation and evaluation of reflections Defect locating and sizing Ultrasonic test performance control Prerequisites To complete this course successfully, you will need to be certified as Ultrasonic Plate and Thickness Testing (UTT) technician and have a competent level of algebra. As we want you to have a positive course experience, when you enrol into this course we will give you access to our online courses: Mathematics for Advanced Methods Ultrasonic Plate and Thickness Testing Who Should Attend This course is designed for anyone that wants to learn how to conduct ultrasonic testing. Experience in ultrasonic testing e.g. UTT is required for this course. If you want to become certified, you will need to gain the relevant practical experience before applying for certification. Duration 5 Days Course Fee $3,600 (includes GST & exam fee) Other courses you might be interested in Ultrasonic Plate and Thickness Testing Magnetic Particle Testing Penetrant Testing NDT Methods and Application ALS Training Academy Course Handbook

10 Vibration Analysis Level 1 (VA1) CERTIFIED COURSE Description Vibration Analysis is a widely used condition monitoring method. This course will start by providing you with an introduction to maintenance practises including technologies such as vibration analysis, thermography and oil analysis. You will then cover the theory behind vibration analysis and learn how to take vibration measurements and conduct basic analysis to diagnose faults in common types of equipment. If you have never been involved in vibration analysis before then by the end of this course you should be in a position where you are ready to undertake data collection under supervision. If you already have the necessary practical experience for certification, then along with the exam you should be ready to get certified. Key Learning Outcomes By the end of this course, you will be able to: Demonstrate an understanding of the key elements of the use of vibration analysis, including: Maintenance practises and vibration condition monitoring Interpretation of the graphical representation of vibration Sources of vibration in equipment Requirements for data collection Basic analysis of data Basic corrective actions Demonstrate the ability to: Correctly place sensors on equipment Set up and use a device to collect data Import and export collection routes Recognition of bad data during data collection Prerequisites There are no formal prerequisites for this course, however, some exposure to Vibration Analysis will be beneficial and we recommend our included Mathematics for Basic Methods course. Who Should Attend This course has been designed for anyone that wants to learn how to collect vibration data and conduct basic analysis regardless of experience. It would also suit anyone wanting to gain a general understanding of what is involved in data collection and analysis. Duration 5 Days Course Fee $2,400 (includes GST & exam fee) Other courses you might be interested in Vibration Analysis Level 2 Reliability Based Condition Monitoring 8 ALS Training Academy Course Handbook 2015

11 Vibration Analysis Level 2 (VA2) CERTIFIED COURSE Description Vibration Analysis is one of the main condition monitoring techniques applied in the industry. This course builds on the level 1 course to provide you with additional knowledge and skill that will allow you to define measurement activities, perform analysis and diagnose faults. You will need to have practical experience completing level 1 duties of data collection and basic analysis going into this course. You will be taken to the next level of skill and understanding to allow you to operate with greater independence. You will also be capable of developing reports detailing the findings and recommendations. Key Learning Outcomes In addition to the outcomes of the level 1 vibration analysis course, by the end of this course, you will be able to: Demonstrate an understanding of the key elements of the use of vibration analysis, including: Vibration analysis fundamentals from the level 1 course Interpretation and evaluation of test results Diagnosis of common fault indications Demonstrate the ability to: Select the correct sensors for the relevant job Determine correct sensor location Determine the correct parameters for data collection Conduct detailed fault analysis Determine appropriate corrective actions based on analysis Perform basic (single-channel) impact tests to determine natural frequencies Generate reports Prerequisites You should have previously completed Vibration Analysis level 1 prior to this course, or have completed training and experience equivalent to that required for level 1 certification. Who Should Attend If you have over 6 months practical experience in vibration analysis and you want to be involved in the planning, analysis and recommendations component of vibration analysis, then this course is for you. This course is for the more serious vibration analyst wishing to further their career in this realm. Duration 5 Days Course Fee $2,400 (includes GST & exam fee) Other courses you might be interested in Vibration Analysis Level 1 Reliability Based Condition Monitoring Understand: Select reference standards Equipment testing and diagnostic procedures Fault severity determination ALS Training Academy Course Handbook

12 Informational Courses These are all other courses that we provide that are not certified courses with AINDT. They can range from long to short, from training to workshops to seminars. The courses we currently provide include: Classified Plant Management and Inspection NDT Methods and Applications Through careful selection, we have chosen our very best people to present these courses. They are experts in their field and have a very high level of presentation skills. Oil Analysis for Industrial Maintenance Professionals Reliability Based Condition Monitoring What do you get? We want your experience to be as painless as possible, so everything you will need to complete the course is provided. Your course enrolment includes: Full training course (lunch and morning tea provided) Training course certificate upon completion Training materials Access to our training materials through our online system Participation in our online discussion group What can you expect? Once you enrol in our course, you will receive access to our online materials and discussion group. We will contact you to confirm your enrolment. We will provide you with further details about your training and send you reminders leading up to your training. During the course our highly experienced experts will keep you engaged through interactive presentations, discussion and demonstrations. There is often a lot to take in during these sessions, and you may have questions once the course is over. Our online discussion forums provide you with access to our experts where you can ask questions and participate in discussions after your course is over. 10 ALS Training Academy Course Handbook 2015

13 INFORMATIONAL COURSE Classified Plant Management and Inspection Description The aim of this training is to provide participants with a detailed overview of the management and inspection requirements for fixed and mobile Classified Plant such as boilers, cranes, hoists, lifts and pressure vessels. This includes statutory requirements and obligations in accordance with the Mines Safety and Inspection Act and Regulations. The application and guiding principles relating to the associated Australian standards are also explained. Topics: Mines Safety and Inspection Act and Regulations Fixed and mobile Classified Plant and Equipment Relevant Australian Standards Risk and Hazard Management Itinerant Classified Plant and Equipment Where and when to seek additional technical resources and expertise Who Should Attend Engineering and Maintenance Managers Reliability Engineers Plant Engineers Maintenance Planners, Coordinators and Supervisors Operations Managers Integrity Engineers Plant Inspectors Duration 2 Days Course Fee $750 (includes GST) ALS Training Academy Course Handbook

14 INFORMATIONAL COURSE NDT Methods and Applications Description This course has been designed to provide you with an overview of the commonly used NDT methods. It will help you to better understand the important role of NDT in the engineering design process and how NDT is used to monitor the condition of your assets. We will explain how the methods work and where they are used in industrial settings. This will help you identify the relevant methods applicable to your assets and the benefits that each can provide. You will gain an understanding of strengths and limitations of each method to assist you in selecting the most effective, efficient and reliable NDT test. This course covers the basic theory of each method, common test applications and basic practical experience of equipment in general use. Topics: The role of NDT in Engineering Design and Asset Care NDT Certification Schemes Indications, Discontinuities and Defects Types of Discontinuities Manufacturing Processes and Associated Defects Effects of Defects on Serviceability of Products For each method (MT, PT, UT, RT, ET and specialised methods e.g. ACFM, Phased Array) Explanation of how the method works Advantages and Disadvantages Suitability of Materials for Testing Detection of Discontinuities Who Should Attend Maintenance Managers Maintenance Planners Coordinators and Supervisors Operations Managers Reliability and Integrity Engineers Plant Inspectors Condition Monitoring personnel Duration 3 Days Course Fee $1,200 (includes GST) 12 ALS Training Academy Course Handbook 2015

15 INFORMATIONAL COURSE Oil Analysis for Industrial Maintenance Professionals Description Our one-day, exclusive workshops are presented in a relaxed atmosphere where participants are encouraged to interact with our trainers and other maintenance professionals. You gain the knowledge and skills necessary to improve the oil, fuel, coolant, and condition monitoring sectors of your maintenance program. Implement practices and develop advanced skills that help you reduce maintenance costs and decrease downtime, improve the reliability, maximize the life, increase the resale value, and protect the warranty on your equipment. Topics: Oil Analysis & Condition Monitoring The role of oil analysis Classification and properties of oil Tests performed and their significance Oil cleanliness and particle analysis Taking an oil sample Troubleshooting and predictive maintenance Establishing specific alert levels Interpretation of results Webtrieve online software Case studies Coolant Testing Engine coolants changes through the years Properties of coolants Conventional coolants Extended life coolants (OAT technology) Hybrid coolants (NOAT technology) Tests methods for coolants Proper coolant sampling techniques Symptoms of cooling system failure Coolant tests guidelines Coolant report review Toolbox tools to maintain cooling systems Fuel Testing Why test your fuel The importance of fuel cleanliness Classification and properties of fuel Fuel tests performed and their significance Fuel problem symptoms Proper fuel sampling techniques How to read the analysis report Who Should Attend This workshop was specifically designed for all maintenance professionals in mind. Including, Plant technicians, Tradespeople and fitters, Maintenance engineers, Condition monitoring personnel, Lubrication engineers and all those who seek to improve their reliability programs. Duration 1 Day Course Fee $330 (includes GST) Calendar for Oil Analysis Training The Oil Analysis course is run by our Tribology team. Please visit the web link below for their training details, times and locations. alsglobal.com > tribology > downloads > training programs ALS Training Academy Course Handbook

16 INFORMATIONAL COURSE Reliability Based Condition Monitoring Description With challenges in the global economy and cost pressure on operating mines and plants, it is imperative to apply best practices to plant reliability management. Condition monitoring, where correctly applied forms an integral part of any reliability improvement and cost management program. ALS has worked with the industry over many years to optimise the returns from their condition monitoring investments and is now able to provide training in Reliability Management, Condition Monitoring Specifications and Applications, Program Optimisation and Root Cause Analysis. In many situations, condition monitoring and predictive maintenance has not been applied correctly and this has resulted in unnecessary work, on-going reliability issues and difficulty in understanding plant and equipment condition. In other cases, condition monitoring has only been applied at the fire fighting level without a focus on continuous improvement in plant reliability. Come and understand the principles of a Reliability Based Condition Monitoring Program based on industry best practices, as embodied in ISO and a suite of other condition monitoring standards. These principles are complemented by real world practical experience about what works and what doesn t work. ALS presenters are skilled communicators and experienced engineers providing a highly interactive and informative experience. Who Should Attend Engineering and Maintenance Managers Reliability Engineers Plant Engineers Maintenance Planners, Coordinators and Supervisors Operations Managers Condition Monitoring Engineers and Supervisors Reliability Technicians Duration 2 Days Course Fee $1,200 (includes GST) Topics: Maintenance and reliability Equipment failures why and how Reliability principles and applications Condition Monitoring Standards Applying the right technology Applying the right condition monitoring process Getting the best information from condition monitoring Proactive work to improve equipment reliability Root cause analysis and addressing the causes of poor reliability Condition Monitoring A dynamic program Financial Justifications and Return on Investment 14 ALS Training Academy Course Handbook 2015

17 Schedule of Rates Certified Courses Informational Courses Magnetic Particle Testing Level 2 (MT2 Multisector) 5 days $2,400 Reliability Based Condition Monitoring 2 days $1,200 Penetrant Testing Level 2 (PT2 Multisector) 5 days $2,400 NDT Methods and Application 3 days $1,200 Ultrasonic Plate and Thickness Testing (UT level 1) 5 days $2,400 Classified Plant Management and Inspection 2 days $750 Ultrasonic Testing of Welds Level 2 (UT2 - Welds) 10 days $3,600 Oil Analysis for Industrial Maintenance Professionals 1 days $330 Vibration Analysis Level 1 (VA1) 5 days $2,400 All costs are per person and inc. GST. Vibration Analysis Level 2 (VA2) 5 days $2,400 ALS Training Academy Course Handbook

18 Enrolment Form Please send your completed form to or post to one of our training centres listed below. CONTACT DETAILS Full Name Phone LOCATIONS QLD P: Brisbane Road Riverview, QLD 4303 WA P: Bannister Road Canning Vale, WA 6155 Company Name (if employed) Company Address State Postcode We also have 6 branch locations in AU & NZ or we can come to your site. Contact us for more details. ENROLMENT INFORMATION Please refer to our calendar for course locations and dates. Full Name Course Location Date Cost Total Cost CERTIFIED COURSES Magnetic Particle Testing Level 2 $2,400 Penetrant Testing Level 2 $2,400 Ultrasonic Testing (Plate & Thickness) $2,400 Ultrasonic Test Level 2 (Welds) $3,600 Vibration Analysis Level 1 $2,400 INFORMATIONAL COURSES Reliability Based Condition Monitoring $1,200 NDT Methods and Application $1,200 Classified Plant Management and Inspection $750 Oil Analysis for Industrial Maintenance Professionals $330 All pricing includes GST. Vibration Analysis Level 2 $2,400 PAYMENT OPTIONS Credit Card Type Visa MasterCard Purchase Order No. CC Number Name on Card Expiration Date / CCV Signature Other payment option: Please advise if you would like to pay by an alternate method e.g. Cheque. Once we receive your application we will contact you to confirm your booking and provide you with course information such as venue details, course start and end times etc. Course Fee includes lunch, refreshments, local laboratory tour, training manual, stationary, etc. All cancellation requests must be made in writing. Registration fees for courses cancelled within seven days of the course commencement are nonrefundable. ALS Training Academy reserves the right to cancel or postpone any training course in the event of not having enough nominations for a particular session. 16 ALS Training Academy Course Handbook 2015

19 Subscribe Signup to receive Asset Care Counts Asset Care Counts is a regular publication produced by the ALS Industrial team featuring case studies, articles and announcements relevant to the Power, Water & Infrastructure, Mining & Minerals Processing, Oil & Gas and Welding & Fabrication industries keeping our clients up to date with the latest developments at ALS. Follow us au.linkedin.com/company/als-industrial twitter.com/alsindustrial Helpful links Industrial asset integrity Non-destructive testing Advanced non-destructive testing Risk based inspection Condition monitoring Mechanical testing Materials engineering Power services RemLife Remaining life assessment Oil, fuel, coolant & metalworking analysis alsglobal.com/industrial alsglobal.com/ndt alsglobal.com/andt alsglobal.com/rbi alsglobal.com/conditionmonitoring alsglobal.com/mechtesting alsglobal.com/materialsengineering alsglobal.com/powerservices alsglobal.com/remlife alsglobal.com/tribology

20 Training Academy Certified and Informational Courses for your Asset Care Management training. Enquiries: WA QLD alsglobal.com/trainingacademy