MTU Maintenance Dallas, Inc. Integrated Management System. MM 03D-03 Capability List Manual
|
|
|
- Warren Wilkinson
- 8 years ago
- Views:
Transcription
1
2 Chapter 0 Page 2 of Table of Contents 0 Title Page Table of Contents List of Effective Pages Record of Revision Reserved Distribution List Introduction Airframe CF CF CFM Pratt & Whitney GE V Accessories Components Non-Destructive Testing... 15
3 Chapter 0 Page 3 of List of Effective Page Section Page Issue Section Page Issue JAN JAN JAN JAN JAN NOV NOV JAN JAN JAN JAN JAN JAN JAN JAN2015
4
5 Chapter 0 Page 5 of Reserved
6 Chapter 0 Page 6 of 15 Revision: Initial Date: 01NOV Distribution List COPY NUMBER HOLDER FORMAT Copy No. 1 Quality Manager Hard Copy Copy No. 2 FAA CD
7 Page 7 of 15 Revision: Initial Date: 01NOV Capabilities list Manual Introduction The repair station Capabilities List manual will be handled as any other controlled document at MTU Maintenance Dallas. Reference the MM 02D-02 RSQM for details. The repair station Capabilities List manual may be revised independently or in conjunction with the RSQM. This manual provides a vehicle for MTU Maintenance Dallas to capture and maintain the repair stations list of capabilities ratings. This Repair Station will maintain a capabilities list manual which will specifically reference the work that the Repair Station is rated to perform. Only those Engines/airframes/components/accessories listed will be approved for return to service. Any new engines/airframes/components/accessories will not be added to the capabilities list manual and will not be approved for return to service until the Director of Maintenance performs and documents the self evaluations as required by MM 02D-02 Section 5.1 and OPD and recorded on Form FO-SW-017. Providing all of the criteria set forth by CFR s are met, the capabilities list manual will then be updated to reflect the new ratings. The certificate holding district office will be notified immediately of any new revision to the capabilities list manual OPD The repair stations capabilities list manual will be kept in a format acceptable to the administrator. All personnel will be thoroughly familiar with the Capabilities List and limitations of this Repair Station. Reference the MTU Maintenance Dallas OPD for further instructions for revising the capabilities list. One official hard copy of The Capabilities list manual will be kept. Copy number one (master) in the Quality Managers office. The Capabilities list manual will also be kept in electronic format with one official copy that will be provided to the local FAA administrator. And an official electronic copy kept on the Quality drive of the company data base system. The actual capabilities list matrix contained in this manual may be copied and distributed as required, the date and revision status should be verified with the master copy to ensure the list is current. If hard copies are made the terms reference only should be noted on the form or if electronically held note reference only in the correspondence.
8 Page 8 of 15 MTU MAINTENANCE DALLAS CAPABILITIES LIST ENGINE ON WING MAINTENANCE TO INCLUDE: 1.1 AIRFRAME: ENGINE R & R AIRFRAME PYLON INSP MPA Run-up Observation and Recording PERFORM SYSTEMS & AVIONICS TESTS RELATED TO ENGINES McDONNELL DOUGLAS MD90 SERIES DC10/MD10/MD11 BOEING B737-SERIES B757-SERIES B747-SERIES B767-SERIES B777-SERIES AIRBUS A300/A310 A318/A319/A320/321 CANADAIR REGIONAL JET CRJ100/200/700/900 CL-601/CL-604 EMBREAR 170/175 SERIES 190 SERIES Accountable Manager approval:
9 Page 9 of 15 MTU MAINTENANCE DALLAS CAPABILITIES LIST 1.2 POWERPLANT: CF34 CF34-3 CF34-8 CF34-10 Low Pressure Compressor General Maintenance, Inspection and Repair to include: Fan Blade removal and Lubrication Fan Disk Removal and Replacement High Pressure Compressor General Maintenance, Inspection and Repair to include: Top Case Bottom Case Bore Blend N/A N/A Combustor Section General Maintenance, Inspection and Repair to include: Liner Replacement High Pressure Turbine General Maintenance, Inspection and Repair to include: HPT Rotor and Stator Swap Low Pressure Turbine General Maintenance, Inspection and Repair to include: LPT Module Swap TRF Module General Maintenance, Inspection and Repair to include: Exhaust Frame assembly removal and installation AGB (Accessory Gearbox) General Maintenance, Inspection and Repair to include: Gearbox Replacement Borescope Inspection QEC Build-up and Installation Replacement of External Accessories and Components Continue Time Inspection: (Verify AD Compliance, External visual Inspections, Observe MPA Data, Borescope) SCHEDULED MAINTENANCE PROGRAM ITEMS Accountable Manager approval:
10 Page 10 of 15 MTU MAINTENANCE DALLAS CAPABILITIES LIST 1.3 POWERPLANT: CF6 CF6-50 CF6-80 Low Pressure Compressor General maintenance, Inspection and Repair to Include: Fan Blade removal and Lubrication Fan Disk Removal and Replacement Booster Removal and Replacement High Pressure Compressor General Maintenance, Inspection and Repair to include: Top Case Removal and Replacement Bottom Case Removal and Replacement Boreblend Combustor Section General Maintenance, Inspection and Repair High Pressure Turbine General Maintenance, Inspection and Repair Low Pressure Turbine General Maintenance, Inspection and Repair to include: LPT Upper Case Removal and Replacement N/A LPT Lower Case Removal and Replacement N/A TRF Module General Maintenance, Inspection and Repair to include: Turbine Rear Frame Removal and Replacement Accessory Gear Box General Maintenance, Inspection and Repair to include: Accessory Gearbox Removal and Replacement Transfer Gearbox Removal and Replacement N/A Borescope Inspection QEC Build-up and Installation Replacement of External Accessories and Components Power Conversion (FADEC and Non-FADEC) N/A Continue Time Inspection: (Verify AD Compliance, External visual Inspections, Observe MPA Data, Borescope) SCHEDULED MAINTENANCE PROGRAM ITEMS Accountable Manager approval:
11 Page 11 of 15 MTU MAINTENANCE DALLAS CAPABILITIES LIST 1.4 POWERPLANT: CFM56 CFM56-3 CFM56-5 CFM56-7 Low pressure Compressor General Maintenance, Inspection and Repair to include: Fan Blade removal and Lubrication Fan Disk Removal and Replacement High Pressure Compressor General Maintenance, Inspection and Repair to include: Top Case Bottom Case Boreblend Combustor Section General Maintenance, Inspection and Repair High Pressure Turbine General Maintenance, Inspection and Repair Low Pressure Turbine General Maintenance, Inspection and Repair TRF Module General Maintenance, Inspection and Repair to include: Turbine Frame Removal and Replacement Accessory Gear Box General Maintenance, Inspection and Repair to include: Accessory Gear Box Removal and Replacement Transfer Gear Box Removal and Replacement Borescope Inspection QEC Build-up and Installation Replacement of External Accessories and Components Power Conversion PMC, MEC and/or VSV actuators N/A N/A Power Conversion Plug Replacement and Data Tag update N/A Continue Time Inspection: (Verify AD Compliance, External visual Inspections, Observe MPA Data, Borescope) SCHEDULED MAINTENANCE PROGRAM ITEMS Accountable Manager approval:
12 Page 12 of 15 MTU MAINTENANCE DALLAS CAPABILITIES LIST 1.5 POWERPLANT: Pratt and Whitney PW2000 PW4000 Low pressure Compressor General Maintenance, Inspection and Repair to include: Fan Blade Removal and Lubrication Fan Blade Re-contour Repair High Pressure Compressor General Maintenance, Inspection and Repair Combustor Section General Maintenance, Inspection and Repair High Pressure Turbine General Maintenance, Inspection and Repair Low Pressure Turbine General Maintenance, Inspection and Repair TRF Module General Maintenance, Inspection and Repair Accessory Gearbox General Maintenance, Inspection and Repair to include: Removal and Replacement Borescope Inspection QEC Build-up and Installation Replacement of External Accessories and Components Continue Time Inspection: (Verify AD Compliance, External visual Inspections, Observe MPA Data, Borescope) SCHEDULED MAINTENANCE PROGRAM ITEMS Accountable Manager approval:
13 Page 13 of 15 MTU MAINTENANCE DALLAS CAPABILITIES LIST 1.6 POWERPLANT: GE90 GE90 Low pressure Compressor General Maintenance, Inspection and Repair to include: Fan Blade removal and Lubrication Fan Module Removal and Replacement High Pressure Compressor General Maintenance, Inspection and Repair to include: Top Case Bottom Case Bore Blend Combustor Section General Maintenance, Inspection and Repair High Pressure Turbine General Maintenance, Inspection and Repair Low Pressure Turbine General Maintenance, Inspection and Repair TRF Module General Maintenance, Inspection and Repair to include: Exhaust Frame assembly removal and installation AGB (Accessory Gearbox) General Maintenance, Inspection and Repair to include: Gearbox Replacement Borescope Inspection QEC Build-up and Installation Replacement of External Accessories and Components Continue Time Inspection: (Verify AD Compliance, External visual Inspections, Observe MPA Data, Borescope) SCHEDULED MAINTENANCE PROGRAM ITEMS Accountable Manager approval:
14 Page 14 of 15 MTU MAINTENANCE DALLAS CAPABILITIES LIST 1.7 POWERPLANT: V2500 V2500-A1 V2500-A5 V2500-D5 Low pressure Compressor General Maintenance, Inspection and Repair to include: Fan case Attrition Liner, Anti-ice Panel & Acoustic panel Fan Blade removal and Lubrication TAP testing High Pressure Compressor General Maintenance, Inspection and Repair to include: Combustor Section General Maintenance, Inspection and Repair to include: Fuel Nozzle replacement High Pressure Turbine General Maintenance, Inspection and Repair Low Pressure Turbine General Maintenance, Inspection and Repair Accessory Gearbox General Maintenance, Inspection and Repair to include: Removal and Replacement Borescope Inspection QEC Build-up and Installation Replacement of External Accessories and Components Continue Time Inspection: (Verify AD Compliance, External visual Inspections, Observe MPA Data, Borescope) SCHEDULED MAINTENANCE PROGRAM ITEMS Accountable Manager approval:
15 Page 15 of NON-DESTRUCTIVE TESTING: Specifications: (LPI) Liquid Penetrant Inspection (MPI) Magnetic Particle Inspection Flourescent Penetrant Inspection Eddy Current Inspection Ultrasonic Inspection NAS 410, Certification and Qualification of personnel ASTM: E1417/E1417M-11e1 E165/E165M-12 (LPI) Specific NDT manual procedures, AD or SB -- Note: All activity identified in this capability list may be performed away from station in accordance with the part D-100 of the repair station Operations Specifications. Accountable Manager approval:
European Aviation Safety Agency
European Aviation Safety Agency EASA TYPE CERTIFICATE DATA SHEET Number : IM.E.026 Issue : 04 Date : 04 April 2014 Type : Engine Alliance LLC GP7200 series engines Models: GP7270 GP7272 GP7277 List of
Advanced MRO Solutions
Advanced MRO Solutions Reliability Expertise Trust Known for reliable, expert service for more than 20 years, Commercial Jet has earned the trust of the world's leading airlines, owners and operators.
Training Catalogue. Training Catalog WE QUALIFY! PART-147 APPROVED TRAINING CENTER
Training Catalogue Sabena technics Email training : training@sabenatechnics.com reserves the right to modify this document at its sole discretion. 1 / 58 Table of Contents Welcome... 3 Introduction...
Thank you for your interest in Phoenix Composite Solutions, LLC.
Phoenix Composite Solutions, LLC FAA Repair Station - 4PR734 Dear Quality Manager, Thank you for your interest in Phoenix Composite Solutions, LLC. Due to the extensive number of customer survey requests,
GE Aviation. Customer Technical Education Center Technical Training, Facility and Advance Maintenance Training
GE Aviation Customer Technical Education Center Technical Training, Facility and Advance Maintenance Training History of GE From the first turbosupercharger to the world s most powerful commercial jet
DRAFT (Public comments phase August 2006) Date: XX/XX/XX. Initiated by: ANE-110
(Public comments phase August 2006) Advisory Circular Subject: PROPOSED DRAFT Turbine Engine Repairs and Alterations Approval of Technical and Substantiation Data Date: XX/XX/XX Initiated by: ANE-110 AC
European Aviation Safety Agency. Engine Type Certificate Data Sheet EASA.IM.E.002
European Aviation Safety Agency Engine Type Certificate Data Sheet EASA.IM.E.002 Issue: 2 Date: 16 March 2004 Type: GE Aircraft Engines GE90 Series Engines Section 1, page 3 Section 2, page 9 GE90-76B
AVIATION MAINTENANCE TECHNOLOGY
HYBRID PROGRAM AVIATION MAINTENANCE TECHNOLOGY FIRST EVER FAA APPROVED AVIATION MAINTENANCE PROGRAM OFFERED PARTIALLY ONLINE OUR HISTORY W.G. Skelly, an oil magnate, founded Spartan as an aircraft manufacturing
REPAIR STATION AND QUALITY CONTROL MANUAL For. Certified Repair Station # 3S8R711B
M3-RSM-0001 APPENDIX C Capabilities Listing REPAIR STATION AND QUALITY CONTROL MANUAL For Certified Repair Station # 3S8R711B Revision 5 29 May 2012 Appendix c PAGE INTENTIONALLY LEFT BLANK Appendix c
TYPE-CERTIFICATE DATA SHEET
TYPE-CERTIFICATE DATA SHEET EASA TC E.036 for Trent 1000 series engines Certificate Holder Rolls-Royce plc PO Box 31 Derby DE24 8BJ United Kingdom For Models: Trent 1000-A Trent 1000-A2 Trent 1000-AE Trent
AMO Operations Specifications Civil Aviation Administration of Vietnam
The authorizations contained within this document represent the complete authorizations granted to this AMO. No other maintenance functions are authorized. SECTION A - APPROVED MAINTENANCE ORGANIZATION
Avionics Instruments Accessories Calibrations
Avionics Instruments Accessories Calibrations Since 1946, OTTO Instrument Service has earned an international reputation for providing superior overhaul and repair, manufacturing, and distribution services
g GEAE The Aircraft Engine Design Project- Engine Cycles Design Problem Overview Spring 2009 Ken Gould Phil Weed GE Aircraft Engines
GEAE The Aircraft Engine Design Project- Engine Cycles Design Problem Overview Spring 2009 Ken Gould Phil Weed 1 Background The Aircraft Engine Design Project- Engine Cycles A new aircraft application
[Docket No. FAA-2015-2983; Directorate Identifier 2015-NE-20-AD] Airworthiness Directives; CFM International S.A. Turbofan Engines
![[Docket No. FAA-2015-2983; Directorate Identifier 2015-NE-20-AD] Airworthiness Directives; CFM International S.A. Turbofan Engines](/thumbs/24/3311671.jpg "[Docket No. FAA-2015-2983; Directorate Identifier 2015-NE-20-AD] Airworthiness Directives; CFM International S.A. Turbofan Engines")
This document is scheduled to be published in the Federal Register on 10/02/2015 and available online at http://federalregister.gov/a/2015-24729, and on FDsys.gov [4910-13-P] DEPARTMENT OF TRANSPORTATION
Engine Maintenance Concepts for Financiers Elements of Turbofan Shop Maintenance Costs
Engine Maintenance Concepts for Financiers Elements of Turbofan Shop Maintenance Costs By: Shannon Ackert sackert@aircraftmonitor.com Abstract Commercial aircraft maintenance cost can be divided into three
Methods, techniques, and practices contained in manufacturer s Instructions for Continued Airworthiness (ICA),
Subject: MAINTENANCE AND ALTERATION Date: 10/7/02 AC : 120-77 DATA Initiated by: AFS-300 Change: 1. PURPOSE. This advisory circular (AC) provides one means, but not the only means, of ensuring that the
Ex Smiths 14% 20% 14% 17% Growing commercial installed base 1,747 -a) deliveries in 06 ~2,100 -b) deliveries in 07 Segment Profit
GE Aviation Aviation ($ in billions) $7.6 20% Ex Smiths 14% Business imperatives Winning technology Revenue $6.3 $1.4 $1.6 17% 14% Deep domain knowledge Growing commercial installed base 1,747 -a) deliveries
GE Aviation. innovative repair services
GE Aviation innovative repair services reducing cost of ownership through innovative repair Our aviation business is founded upon innovation that has characterized GE for more than 100 years and putting
AIRCRAFT SERVICES COMPONENT SERVICES ENGINE SERVICES LINE MAINTENANCE TRAINING SERVICES ENGINE PARTS REPAIR SERVICES
AIRCRAFT COMPONENT ENGINE LINE MAINTENANCE TRAINING ENGINE PARTS REPAIR KEY COMPANY FACTS One of the leading global MRO service providers Over 80 years of experience in engine MRO Around 500 customers
Capabilities at a glance
More mobility for the world The Lufthansa Technik Group Capabilities at a glance Your needs shape our support Whether you are looking for the repair of a single component or a global maintenance agreement
Aeronautics AERO, FLTEC, ATCAD
Aeronautics AERO, FLTEC, ATCAD Degrees: A.S. Air Traffic Control A.S. Aircraft Dispatcher A.S. Airframe A.S. Combined Airframe and Powerplant A.S. Flight Technology A.S. Powerplant Certificates of Achievement:
820086 - AND - Non-Destructive Testing
Coordinating unit: 820 - EUETIB - Barcelona College of Industrial Engineering Teaching unit: 702 - CMEM - Department of Materials Science and Metallurgy Academic year: Degree: 2015 BACHELOR'S DEGREE IN
Courses MODEL CH-47. Course Length: 1 Week Maximum Student Load: 15 AIRCRAFT FAMILIARIZATION H7-U-00. Domestic: $12,600 International: $21,000
Courses MODEL CH-47 AIRCRAFT FAMILIARIZATION H7-U-00 Course Length: 1 Week Maximum Student Load: 15 Domestic: $12,600 International: $21,000 IN-PLANT COST: $7,600 Upon successful completion, the student
STATEMENT OF WORK (SOW) On-Call Certified Welding Inspections and Nondestructive Testing
1.0 INTRODUCTION Colorado Springs Utilities (UTILITIES) is seeking qualified firms to provide verification welding inspection services, nondestructive testing services, and technical reporting to Colorado
DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION 8000.84 SUBJ: PROCEDURES TO ACCEPT INDUSTRY-DEVELOPED TRAINING FOR LIGHT-SPORT REPAIRMEN
ORDER DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION 8000.84 9/27/04 SUBJ: PROCEDURES TO ACCEPT INDUSTRY-DEVELOPED TRAINING FOR LIGHT-SPORT REPAIRMEN 1. PURPOSE. This order assigns the Light-Sport
59674 Federal Register / Vol. 80, No. 191 / Friday, October 2, 2015 / Proposed Rules
59674 Federal Register / Vol. 80, No. 191 / Friday, October 2, 2015 / Proposed Rules PART 39 AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: Authority: 49 U.S.C.
EUROCOPTER EC130 B4 STANDARD AVIONICS & INSTRUMENTS ADDITIONAL AVIONICS & INSTRUMENTS
EUROCOPTER EC130 B4 Serial Number: 4107 Year of manufacture: July 2006 Total time: est. 800 hours Colour: Black with silver stripe Type of operation: Corporate Location: Auckland, New Zealand FACTORY OPTIONS
Aeronautics. Airframe Maintenance Technician
Airframe Maintenance Technician Program Description Practical and theoretical knowledge in basic maintenance techniques, plus the special requirements of either airframe or powerplant work. Upon satisfactory
Polish Aerospace Technology Platform
Polish Aerospace Technology Platform Transport in 7th FP Warsaw, June 06-07 Robert Haligowski Technology Management EU Project Coordinator Polish Aerospace Technology Platform Coordination Innovation in
Technical Manual Index August 1, 2016
Technical Manual Index August 1, 2016 The CF6 Technical Manual Index has been reformatted as follows: Manuals and Supporting Manuals - Section 1 EM DVDs ( Manuals) Section 2 PP IPCs (Powerplant Illustrated
3 Engine Lubrication System
3 Engine Lubrication System 3.1 General Within a turbofan engine the lubrication system serves several functions essential to the safe and reliable operation of the engine. These functions are: Lubrication
Maintenance I Repair I Overhaul
SETTING THE STANDARD OF CUSTOMER SERVICE Maintenance I Repair I Overhaul Engines, Dynamic Components, Airframes, Avionics Vector Aerospace is recognized for the delivery of superior customer satisfaction
COALITION OF VOCATIONAL AND REGULAR AVIATION MAINTENANCE TECHNICIAN EDUCATION
COALITION OF VOCATIONAL AND REGULAR AVIATION MAINTENANCE TECHNICIAN EDUCATION Ting Hsien Lan 1 Abstract - The Aviation Maintenance Technician training programs are divided into, vocational and regular,
TWI INDIA CSWIP COURSE AND EXAMINATION FEES 2016 Course / Examination description. CSWIP 3.2 Senior Welding Inspector
TWI INDIA CSWIP COURSE AND EXAMINATION FEES 2016 Course / Examination description FEE CSWIP 3.0 Visual Welding Inspector Course and Examination Package 61,200 Exam only 26,500 Course Only 44,800 3.0 Retest
Flight Standards Handbook Bulletin for Airworthiness (HBAW)
ORDER: 8300.10 APPENDIX: 3 BULLETIN TYPE: BULLETIN NUMBER: BULLETIN TITLE: Flight Standards Handbook Bulletin for Airworthiness (HBAW) HBAW 96-05C (AMENDED) Air Carrier Operations Specifications Authorization
Aircraft Technician Training
Aircraft Technician On the following pages you find detailed course descriptions. All courses are available on request. Nevertheless to facilitate your yearly planning we have fixed dates for type training
EN 4179/NAS 410 Interpretation
EN 4179/NAS 410 Interpretation The NANDTB has adopted NAS 410 / EN 4179 in lieu of AS 3669 as the standard for the qualification and approval of NDT technicians. Employers applying these standards sometimes
Technical Notes NDT 001 Specific Requirements for Non- Destructive Testing Laboratories
ACCREDITATION SCHEME FOR LABORATORIES Technical Notes NDT 001 Specific Requirements for Non- Destructive Testing Laboratories Technical Notes NDT 001, Apr 14 The SAC Accreditation Programme is managed
AIRCRAFT SERVICES COMPONENT SERVICES ENGINE SERVICES LINE MAINTENANCE TRAINING SERVICES AIRCRAFT SERVICES
AIRCRAFT SERVICES COMPONENT SERVICES ENGINE SERVICES LINE MAINTENANCE TRAINING SERVICES AIRCRAFT SERVICES KEY COMPANY FACTS One of the leading global MRO service providers Around 500 customers worldwide
SB96-11B FAA APPROVED Supersedes SB96-11A, SB96-11, M84-16
TELEDYNE CONTINENTAL AIRCRAFT ENGINE SERVICE ULLETIN Compliance Will Enhance Safety SUJECT: PROPELLER STRIKES AND HYDRAULIC LOCKS. CATEGORY 3 S96-11 FAA APPROVED Supersedes S96-11A, S96-11, M84-16 PURPOSE:
Reach Higher with Inspection Academy GE s Inspection Technologies Global Knowledge Center. www.geinspectionacademy.com
Reach Higher with Inspection Academy GE s Inspection Technologies Global Knowledge Center www.geinspectionacademy.com Sharing knowledge. Shaping technology. At GE, we know the value of investing in your
National Transportation Safety Board Washington, D.C. 20594
E PLUR NATIONAL TRA SAFE T Y N IBUS UNUM S PORTATION B OAR D National Transportation Safety Board Washington, D.C. 20594 Safety Recommendation Date: May 28, 2013 In reply refer to: A-13-22 and -23 The
Quality training to suit your needs
Quality training to suit your needs Please contact us at: mail.afi.training@airfrance.fr Air France Industries CONTENTS: AIRBUS COURSES: Airbus Type Courses A318/319/320/321 (CFM56) B1 Theoretical + P1...
400 Main Street East Hartford, CT 06118
TCDS NUMBER E00087EN Revision 2 U. S. DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION TYPE CERTIFICATE DATA SHEET E00087EN International Aero Engines, LLC MODELS: PW1133G-JM, PW1133GA-JM,
RG 7 Accreditation for Inspection Bodies Performing Non-Destructive Testing
This publication contains policy, recommendations and guidance applicable to UKAS accredited inspection bodies RG 7 Accreditation for Inspection Bodies Performing Non-Destructive Testing Contents Section
1 Aircraft Purchase Checklist BUYING YOUR FIRST AIRCRAFT : A STEP BY STEP GUIDE
1 Aircraft Purchase Checklist BUYING YOUR FIRST AIRCRAFT : A STEP BY STEP GUIDE 2 Aircraft Purchase Checklist STEP 1 Determine the Make & Model which meets your travel requirements. Carefully examine your
X-R-I Testing. NonDestructive Testing
In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit,this certificate is granted and awarded by the authority of the Nadcap Management Council to: 700 N
Basic Training. Modern training concepts in accordance with the EASA requirements
Basic Training Modern training concepts in accordance with the EASA requirements Member of the Lufthansa Technik Group Quality based on experience Foreword Lufthansa Technical Training (LTT) can look back
P# (305) 894-0946 - F#
GA Telesis Component Repair Group Southeast Capabilities List - September 2010 3950 NW 28th Street, Miami, FL 33142 P# (305) 894-0946 - F# (305) 871-3397 - msalazar@gatelesis.com PN PART NAME OEM ATA CHAPTER
TYPE APPROVAL CERTIFICATION SCHEME MASS PRODUCED DIESEL ENGINES
1. Introduction TYPE APPROVAL CERTIFICATION SCHEME MASS PRODUCED DIESEL ENGINES 1.1 This scheme details the tests and inspection of diesel engines manufactured by mass production system for use in marine
Ease of implementation
Our efficient powerplant support service assists operators in An efficient powerplant optimizing support reliability helps operators and Time-On-Wing optimize reliability by planning and your Time On Wing
Aerospace Supply Chain & Raw Material Outlook
Aerospace Supply Chain & Raw Material Outlook Presented by: Dr. Kevin Michaels Global Managing Director Aviation Consulting & Services ICF SH&E SpeedNews 4 th Aerospace Raw Materials & Manufacturers Supply
EDUCATION IS THE KEY TO SUCCESS Aviation Maintenance Training School (AMT School) www.amtmiami.com www.amtschool.com
A&P Oral and Practical Exam Guaranteed Preparation Course 1-Week (7 Days) Oral and Practical Exam Preparation One Price with No Hidden Fees (see web site for pricing) (Includes a Set of 3 ASA Q&A Books
The Aircraft Engine Design Project Fundamentals of Engine Cycles
GE Aviation The Aircraft Engine Design Project Fundamentals of Engine Cycles Spring 2009 Ken Gould Phil Weed 1 GE Aviation Technical History I-A - First U.S. jet engine (Developed in Lynn, MA, 1941) U.S.
Pressure Control Supplier Quality Requirements Nondestructive Testing Services SQ-10 Rev: 1.1
Approved By: Jerry Longmire Vice President - Quality Jim Harris Quality Leader - NAM Document Revision Chart The following chart lists the revisions made to this document tracked by version. Use this to
AIRCRAFT SERVICES COMPONENT SERVICES ENGINE SERVICES LINE MAINTENANCE TRAINING SERVICES TRAINING SERVICES
AIRCRAFT SERVICES COMPONENT SERVICES ENGINE SERVICES LINE MAINTENANCE TRAINING SERVICES TRAINING SERVICES KEY COMPANY FACTS One of the leading global MRO service providers Around 500 customers worldwide
Heli-One Corporate Overview November, 2015
Heli-One Corporate Overview November, 2015 Excellence In Helicopter Maintenance Services Page 1 Excellence In Helicopter Maintenance Services Page 2 A Global Leader In Helicopter Maintenance Excellence
VENDOR QUALIFICATION APPROVAL FORM
COMPANY INFORMATION: Company Name: Jet Aviation St. Louis, Inc. Address (Street, City, State) Other Property Locations: Website: Repair Station Certificate No. With Class Rating: Date of Last FAA Audit:
European Aviation Safety Agency
European Aviation Safety Agency EASA TYPE-CERTIFICATE DATA SHEET Number: E.073 Issue: 02 Date: Type: TURBOMECA Arriel 1 series engines Variants Arriel 1A Arriel 1A1 Arriel 1A2 Arriel 1B Arriel 1C Arriel
Precision components from start to finish. Excellence. in performance-critical machining & fabrications
Precision components from start to finish Excellence in performance-critical machining & fabrications Leading precision machining technology... Fully integrated solutions Facilities and capabilities The
Fundamentals of Aircraft Turbine Engine Control
Fundamentals of Aircraft Turbine Engine Control Dr. Sanjay Garg Chief, Ph: (216) 433-2685 FAX: (216) 433-8990 email: sanjay.garg@nasa.gov http://www.lerc.nasa.gov/www/cdtb Outline The Engine Control Problem
REPORT A-050/2005 DATA SUMMARY
REPORT A-050/2005 DATA SUMMARY LOCATION Date and time Site Wednesday, 17 August 2005; 19:45 local time Lobios (Ourense) AIRCRAFT Registration Type and model LV-ALN EUROCOPTER AS 350 B3 Ecureuil Operator
Air Vantage 500 Kubota
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-625 P-625 RETURN TO MAIN INDEX PARTS LIST FOR Air Vantage 500 Kubota P-625-A
Vehicle Fire Protection. An Ownerʼs Manual for ANSUL Fire Suppression/Detection Systems
Vehicle Fire Protection An Ownerʼs Manual for ANSUL Fire Suppression/Detection Systems 002792 Off-road vehicles do have fires Statistics show that off-road vehicles burn with alarming frequency. These
in-service inspections www.sgs.com
in-service inspections www.sgs.com Minimising down -time for wind turbines One of the major concerns in investing in wind farm projects is related to turbine availability, which represents the risk of
Company Profile. New and overhauled Power Plants for sale
1 Company Profile New and overhauled Power Plants for sale - Combined Cycle - Gas & Steam Turbines - Gas & Diesel Engines - Wind Turbines & Green Energy - Coal fired Power & Waste to Energy - Biomass &
ETCAL Level 3 NVQ Diploma in Engineering Technical Support (QCF) Qualification No 600/2285/1 Credit Value 80 GLH 311. Qualification Structure
ETCAL Level 3 NVQ Diploma in Engineering Technical Support (QCF) Qualification No 600/2285/1 Credit Value 80 GLH 311 Qualification Structure Unit Number Unit Title Unit Credit Value/GLH QCF Unit Number
21ST CENTURY AVIATION MAINTENANCE TRAINING
Paper ID #9351 21ST CENTURY AVIATION MAINTENANCE TRAINING Mr. Terry Allen Michmerhuizen, College of Aviation, Western Michigan University Terry Michmerhuizen is currently an Assistant Professor in the
AVIATION MAINTENANCE II
COURSE DESCRIPTION Aviation Maintenance II continues the general aviation maintenance content begun in Aviation Maintenance I. The course prepares students for gainful employment or further study leading
Change Notice Revision 2 adds a definition of NANDTB, and acceptance of the National Aerospace NDT Board of Australia.
Advisory Circular AC43-8 Revision 2 Non-destructive Testing 27 February 2015 General Civil Aviation Authority advisory circulars contain information about standards, practices, and procedures that the
NATA appreciates the opportunity to comment on the recent proposal on Part 145 Repair Station Regulations.
April 13, 2007 Docket Management Facility U. S. Department of Transportation 400 Seventh Street, SW Nassaf Building Room PL-401 Washington, DC 20590-001 RE: DOCKET NO. FAA-2006-26408; 14 CFR 145 REPAIR
Program Update June 2015. G500, G600 Program Update 06.15
Program Update June 2015 G500, G600 Program Update 06.15 All-New Gulfstream G500 and G600 All new, best-in-class aircraft that build upon Gulfstream s technology leadership Unmatched high-speed range capability
Proposal for apprentice training in. South Africa. A cut above the rest, cause we train you best
Proposal for apprentice training in South Africa A cut above the rest, cause we train you best Why invest in ITC? ITC was founded in 2007. We have provided training for major airlines in Africa such as
Propeller Equipment Sale. For Questions please contact Dan Cork Propdoc@aol.com 918-636-3567
Propeller Equipment Sale For Questions please contact Dan Cork Propdoc@aol.com 918-636-3567 Propeller Equipment Sale The equipment for sale is used in the repair and overhaul of aircraft propellers. Propeller
Annex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Accreditation Nr: Address :Centrum İş Merkezi Aydınevler Sanayi Cad. No:3 Küçükyalı - Maltepe 34854 ISTANBUL / TURKEY Phone : +90 216 518
! WARNING. McDonnell & Miller Installation & Maintenance Instructions MM-217(I) Series 150S and 157S (Snap Switch, All Models except 157S-RB-P)
Series 150S and 157S (Snap Switch, All Models except 157S-RB-P) Low Water Cut-Off/Pump Controllers For Steam Boilers and Other Level Control Applications McDonnell & Miller Installation & Maintenance Instructions
Global MRO Market Economic Assessment
Global MRO Market Economic Assessment Prepared For: Aeronautical Repair Station Association The Aeronautical Repair Station Association (ARSA) 121 North Henry Street Alexandria, VA 22314-2903 T: 703 739
MarketsandMarkets. - Global Trends & Forecasts to 2014-2020. sales@marketsandmarkets.com www.marketsandmarkets.com
NONDESTRUCTIVE TESTING MARKET By Technology (Visual, Magnetic Particle, Electromagnetic, Liquid Penetrant, Radiography, Ultrasonic) & Application (Aerospace, Defense, Automotive, Oil & Gas, Infrastructure,
REMOVAL AND INSTALLATION
303-01C-1 REMOVAL AND INSTALLATION Engine Body On Special Tool(s) Adapter For 303-D043 303-D043-02 or equivalent Special Tool(s) 303-01C-1 Turbocharger Lifting Bracket 303-1266 Wrench, Fan Clutch Nut 303-214
AUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District
AUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District Repairs and overhauls automobiles, buses, trucks, and other automotive vehicles: Examines vehicle and discusses with customer or
Technology and Innovation for the Future of Composites Manufacturing
Technology and Innovation for the Future of Composites Manufacturing Ben Davies Sophie Wendes 15 th July 2014 Overview of Presentation Introduction to Sophie Wendes and Ben Davies GKN Overview Overview
APPENDIX B SUPPLEMENTAL INSPECTION PROGRAM A. OBJECTIVES AND PHILOSOPHY OF THE SUPPLEMENTAL INSPECTION PROGRAM
APPENDIX B SUPPLEMENTAL INSPECTION PROGRAM A. OBJECTIVES AND PHILOSOPHY OF THE SUPPLEMENTAL INSPECTION PROGRAM The supplemental inspection program is designed to support the NRC s goals of maintaining
PRELIMINARY INVENTORY K0567 (KA1706, KA2285) DAN REX CORNWELL (1930- ) PAPERS [TWA]
![PRELIMINARY INVENTORY K0567 (KA1706, KA2285) DAN REX CORNWELL (1930- ) PAPERS [TWA]](/thumbs/33/15981195.jpg "PRELIMINARY INVENTORY K0567 (KA1706, KA2285) DAN REX CORNWELL (1930- ) PAPERS [TWA]")
PRELIMINARY INVENTORY K0567 (KA1706, KA2285) DAN REX CORNWELL (1930- ) PAPERS [TWA] This collection is available at The State Historical Society of Missouri Research Center- Kansas City. If you would like
BULLETIN. Serious incident 15-03-2013. involving PH-KZD
BULLETIN Serious incident 15-03-2013 involving PH-KZD Certain report data are generated via the EC common aviation database Page 1 of 13 FOREWORD This bulletin reflects the opinion of the Danish Accident
[Docket No. FAA-2009-1100; Directorate Identifier 2009-NE-37-AD; Amendment 39-18159; AD 2015-10-04]
![[Docket No. FAA-2009-1100; Directorate Identifier 2009-NE-37-AD; Amendment 39-18159; AD 2015-10-04]](/thumbs/39/20136679.jpg "[Docket No. FAA-2009-1100; Directorate Identifier 2009-NE-37-AD; Amendment 39-18159; AD 2015-10-04]")
[Federal Register Volume 80, Number 101 (Wednesday, May 27, 2015)] [Rules and Regulations] [Pages 30138-30144] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc
EASA Safety Information Notice
EASA Safety Information Notice No.: 2008-22 Issued: 12 March 2008 Subject: Wheel and brake assemblies and aircraft accessories that have been improperly maintained and returned to service Ref. Publication:
INSTALLATION INSTRUCTIONS COMMERCIAL ROOM VENTILATORS WITH EXHAUST
INSTALLATION INSTRUCTIONS COMMERCIAL ROOM VENTILATORS WITH EXHAUST MODEL CHCRV-5 For Use with Bard CH Series 3, 4 & 5 Ton 2-Stage Wall Mount Heat Pumps AND W38H, W43H, W49H and W61H Single Stage Wall Mount
SGS AeroSpAce ServiceS
GS erospace Services SGS WHEN YOU NEED TO BE SURE FOR MANUFACTURERS, SUPPLIERS AND OPERATORS Aviation is one of the most exciting industries in the world and also one of the safest, guaranteed by the highest
6.7L Diesel Fuel System Contamination Diagnosis and Service Procedure Job Aid (Revised March, 2012)
6.7L Diesel Fuel System Contamination Diagnosis and Service Procedure Job Aid (Revised March, 2012) Fuel contamination on 6.7L diesel engines can damage fuel system components including the High Pressure
The Future of Work reinven1ng every industry as we know it The Future of Work reinven1ng every industry as we know it.
The Future of Work reinven1ng every industry as we know it The Future of Work reinven1ng every industry as we know it Steve Sargent Trends that are shaping today and our future Increasing government involvement
(IATA-ATC) FOO CRM PPC (OJT)
(IATA-ATC) IR CPL PPL LPR CRM MD DRM MD FOO MD CRM PPC MD E&E A&P (OJT) SDCS ULD (IATA- DGR). ISAGO SAFA IOSA 5s ICDL IT (Emission) APU Tester Training.iranair.com Email: info.training@iranair.com Basic
Mechanical Design of Turbojet Engines. An Introduction
Mechanical Design of Turbomachinery Mechanical Design of Turbojet Engines An Introduction Reference: AERO0015-1 - MECHANICAL DESIGN OF TURBOMACHINERY - 5 ECTS - J.-C. GOLINVAL University of Liege (Belgium)
CHAPTER 13 LOAD HOOKS
CHAPTER 13 LOAD HOOKS This chapter provides safety standards for the inspection, testing, and maintenance of load hooks installed on cranes or hoists and implements the requirements of ASME B30.10, Chapter
HP Laser Jet 4200/4240/4250/4300/4350 Swing Plate
HP Laser Jet 4200/4240/4250/4300/4350 Swing Plate 1 Swing Plate Assembly-RM1-0043 1 Swing Plate Kit-5851-2766 (RM1-0043 plus RM1-1091 gear) CAUTION: Fuser may be hot. Turn off printer, unplug it and allow
GE Energy LMS100. Flexible Power
GE Energy LMS100 Flexible Power GE Energy is a leading supplier of aeroderivative gas turbines and packaged generator sets for industrial and marine applications. We provide power-generating equipment
siemens.com/energy Houston Service Center An integral part of the Siemens Global Service Network
siemens.com/energy Houston Service Center An integral part of the Siemens Global Service Network Our network of world-class repair facilities offers the most advanced equipment and OEM engineering talent
Capability list. A world of expertise. Member of the Lufthansa Technik Group
Capability list A world of expertise Member of the Lufthansa Technik Group 2 Qualification for personnel in the aviation industry Addressing the industry s need for training excellence The success of an
Identifying Modular and Integrative Systems and Their Impact on Design Team Interactions
1 Manuel E. Sosa Technology Management Area, INSEAD, 77305 Fontainebleau, France e-mail: manuel.sosa@insead.edu Steven D. Eppinger MIT Sloan School of Management, Cambridge, MA 014 e-mail: eppinger@mit.edu
FSI LOGO Revision 1.0
FSI LOGO Revision 1.0 HELICOPTER OPERATIONS MODERN HELICOPTERS MODERN HELICOPTERS MODERN HELICOPTERS MODERN HELICOPTERS HUMS Ground Station Overview Health and Usage Monitoring System Ground Station Help
ECM Motors Manufactured By Regal Beloit. Products and Applications- What s an ECM? GEXPRO Regal Beloit s distribution arm for all ECM motor products
ECM Motors Manufactured By Regal Beloit Products and Applications- What s an ECM? ECM 2.3 series ECM 142 Arktic ECM 58mm Arktic ECM 59 Arktic SSC2 Arktic 51 GEXPRO Regal Beloit s distribution arm for all