X-R-I Testing. NonDestructive Testing
|
|
- Alexina McDowell
- 8 years ago
- Views:
Transcription
1
2
3
4
5 In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit,this certificate is granted and awarded by the authority of the Nadcap Management Council to: 700 N Centennial Zeeland, MI United States This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Certificate Number: Expiration Date: 31 January 2017 Joseph G. Pinto Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA
6 SCOPE OF ACCREDITATION 700 N Centennial Zeeland, MI This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC7114 Rev G - Nadcap Audit Criteria for (NDT) Suppliers Accreditation (to be used on audits before 25 January 2015) AC7114S Rev I - Nadcap Supplemental Audit Criteria for (NDT) Suppliers Accreditation Program (to be used on audits before 25 January 2015) S U10 GE S U2 Pratt and Whitney AC7114/1 Rev G - Nadcap Audit Criteria for Facility Penetrant Survey (to be used on audits before 25 January 2015) AC7114/1S Rev I - Nadcap Supplemental Audit Criteria for Facility Penetrant Survey S U10 GE S U2 Pratt and Whitney AC7114/4 Rev G - Nadcap Audit Criteria for Facility Film Radiography Survey (to be used on audits before 25 January 2015) AC7114/4S Rev I - Nadcap Supplemental Audit Criteria for Facility Film Radiography Survey S U10 GE S U2 Pratt and Whitney AC7114/6 Rev A - Nadcap Audit Criteria For Facility Digital Radiography, Digital Detector Array (DDA) Survey (to be used on audits before 25 January 2015) t-frm-17 (17-Jun-10)
7 In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit,this certificate is granted and awarded by the authority of the Nadcap Management Council to: Commerce Drive Sterling Heights, MI United States This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Certificate Number: Expiration Date: 31 January 2017 Joseph G. Pinto Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA
8 SCOPE OF ACCREDITATION Commerce Drive Sterling Heights, MI This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC7114 Rev G - Nadcap Audit Criteria for (NDT) Suppliers Accreditation AC7114S Rev I - Nadcap Supplemental Audit Criteria for (NDT) Suppliers Accreditation Program S U18 Hamilton Sundstrand S U21 Eaton AC7114/1 Rev G - Nadcap Audit Criteria for Facility Penetrant Survey AC7114/1S Rev I - Nadcap Supplemental Audit Criteria for Facility Penetrant Survey S U18 Hamilton Sundstrand S U21 Eaton t-frm-17 (17-Jun-10)
9 In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit,this certificate is granted and awarded by the authority of the Nadcap Management Council to: 5403 E Schaaf Rd Cleveland, OH United States This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Certificate Number: Expiration Date: 31 October 2015 Joseph G. Pinto Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA
10 SCOPE OF ACCREDITATION 5403 E Schaaf Rd Cleveland, OH This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC7114 Rev G - Nadcap Audit Criteria for (NDT) Suppliers Accreditation AC7114S Rev I - Nadcap Supplemental Audit Criteria for (NDT) Suppliers Accreditation Program S U10 GE S U11 The Boeing Company S U18 Hamilton Sundstrand S U2 Pratt and Whitney AC7114/1 Rev G - Nadcap Audit Criteria for Facility Penetrant Survey AC7114/1S Rev I - Nadcap Supplemental Audit Criteria for Facility Penetrant Survey S U10 GE S U11 The Boeing Company S U18 Hamilton Sundstrand S U2 Pratt and Whitney AC7114/2 Rev G - Nadcap Audit Criteria for Magnetic Particle Survey AC7114/2S Rev I - Nadcap Supplemental Audit Criteria for Magnetic Particle Survey S U11 The Boeing Company S U18 Hamilton Sundstrand AC7114/4 Rev G - Nadcap Audit Criteria for Facility Film Radiography Survey t-frm-17 (17-Jun-10)
11 AC7114/4S Rev I - Nadcap Supplemental Audit Criteria for Facility Film Radiography Survey S U10 GE S U11 The Boeing Company S U18 Hamilton Sundstrand S U2 Pratt and Whitney t-frm-17 (17-Jun-10)
12 This certificate is granted and awarded by the authority of the Nadcap Management Council to: 6300 W. Howard Street Niles, IL United States This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Certificate Number: Expiration Date: 31 October 2017 Joseph G. Pinto Executive Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA
13 SCOPE OF ACCREDITATION 6300 W. Howard Street Niles, IL This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC7114 Rev H - Nadcap Audit Criteria for (NDT) Suppliers Accreditation AC7114S Rev J - Nadcap Supplemental Audit Criteria for (NDT) Suppliers Accreditation Program (to be used before 11 October 2015) S U00 None AC7114/1 Rev H - Nadcap Audit Criteria for Facility Penetrant Survey AC7114/1S Rev I - Nadcap Supplemental Audit Criteria for Facility Penetrant Survey (to be used on audits before 11 October 2015) S U00 None AC7114/2 Rev H - Nadcap Audit Criteria for Magnetic Particle Survey AC7114/2S Rev I - Nadcap Supplemental Audit Criteria for Magnetic Particle Survey (to be used before 11 October 2015) S U00 None t-frm-17 (17-Jun-10)
14 In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit, this certificate is granted and awarded by the authority of the Nadcap Management Council to: 785 Norwood Circle Hampton, VA United States This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Certificate Number: Expiration Date: 31 January 2016 Joseph G. Pinto Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA
15 Administered by PRI SCOPE OF ACCREDITATION 785 Norwood Circle Hampton, VA This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC7114 Rev F - Nadcap Audit Criteria for (NDT) Suppliers Accreditation Program to be used BEFORE 3 November 2013 AC7114S Rev H - Nadcap Supplemental Audit Criteria for (NDT) Suppliers Accreditation Program to be used BEFORE 3 November 2013 S U10 GE S U16 Bell Helicopter AC7114/4 Rev F - Nadcap Audit Criteria for Facility Film Radiography Survey to be used BEFORE 3 November 2013 AC7114/4S Rev H - Nadcap Supplemental Audit Criteria for NonDestructive Testing Facility Film Radiography Survey to be used BEFORE 3 November 2013 S U10 GE S U16 Bell Helicopter Americas t-frm (14-Jan-1) 1616 Asia Europe P110190
16 In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit, this certificate is granted and awarded by the authority of the Nadcap Management Council to: 2355 Hwy 101 South Greer, SC United States This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Certificate Number: Expiration Date: 31 October 2015 Joseph G. Pinto Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA
17 Administered by PRI SCOPE OF ACCREDITATION 2355 Hwy 101 South Greer, SC This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC7114 Rev G - Nadcap Audit Criteria for (NDT) Suppliers Accreditation AC7114/1 Rev G - Nadcap Audit Criteria for Facility Penetrant Survey AC7114/2 Rev G - Nadcap Audit Criteria for Magnetic Particle Survey AC7114/4 Rev G - Nadcap Audit Criteria for Facility Film Radiography Survey Americas t-frm (17-Jun-10) 1616 Asia Europe P110190
FACC Operations GmbH. NonDestructive Testing
In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit,this certificate is granted and awarded by the authority of the Nadcap Management Council to: Fischerstrasse
More informationTata Steel UK Limited. NonDestructive Testing
In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit,this certificate is granted and awarded by the authority of the Nadcap Management Council to: Stocksbridge
More informationBUSINESS AND QUALITY SYSTEMS SELF SURVEY
BUSINESS AND QUALITY SYSTEMS SELF SURVEY Company Location and Contact Information: Company Name: Mailing address: County: C.I.L. Inc. 400 Canal Street, Lawrence, MA 01840 Essex Phone Number: (978) 685
More informationPressure Control Supplier Quality Requirements Nondestructive Testing Services SQ-10 Rev: 1.1
Approved By: Jerry Longmire Vice President - Quality Jim Harris Quality Leader - NAM Document Revision Chart The following chart lists the revisions made to this document tracked by version. Use this to
More informationThe Future of Supply Chain Management: What the Medtech Industry Can Learn from the Aerospace Industry?
The Future of Supply Chain Management: What the Medtech Industry Can Learn from the Aerospace Industry? 26 June 2013 Joseph G Pinto Executive Vice-President & COO Performance Review Institute 1 Today s
More informationSupplier Quality Assurance Requirements Manual
12716 EAST PINE STREET TULSA, OK 74116 Supplier Quality Assurance Requirements Manual Approved: Mike Collins Quality Assurance Manager Precise Machining & Manufacturing 1 Record of Revisions Revision D
More informationRe-Authentication Guide
AQMS AUDITOR AUTHENTICATION BODY Re-Authentication Guide This document contains guidance for completing the AQMS Auditor Re- Authentication process for individuals currently holding an AQMS Auditor Authentication
More informationNon-Destructive Testing Newsletter
N S Non-Destructive Testing Newsletter July 2008 Issue Highlights From the Chair...1 Nadcap Meeting Schedule...1 NDT Newsletter Want to be on Circulation?...2 Responsible Level 3...2 New Procedures...2
More informationReliable Flaw Detection. Fast Inspection Times. High quality non-destructive testing services tailored for all your needs. www.tuv.
INDUSTRIAL SERVICES - NON-DESTRUCTIVE TESTING Reliable Flaw Detection. Fast Inspection Times. High quality non-destructive testing services tailored for all your needs. www.tuv.com/ndt The reliability
More informationCertificate of Registration. Kirkhill Aircraft Parts Co (Kapco Global) 3120 E. Enterprise Street Brea, California, 92821, United States
Certificate of Registration This certifies that the Quality Management System of has been assessed by NSF-ISR and found to be in conformance to the following standard(s): AS9100C *Audited in accordance
More informationAEROSPACE QUALITY MANAGEMENT SYSTEM STANDARDS - AS 9100 SERIES., 28/1/2005 S.Lichtenstein 1
AEROSPACE QUALITY MANAGEMENT SYSTEM STANDARDS - AS 9100 SERIES ליכטנשטיין שלמה מנהל ניהול האיכות במטה התעשייה האווירית בע"ממ יוו"ר מגזר תעשיות ביטחוניות תעופה וחלל באיגוד הישראלי לאיכות, 28/1/2005 S.Lichtenstein
More informationEXCEEDING YOUR EXPECTATIONS
www.labtesting.com EXCEEDING YOUR EXPECTATIONS with quality, service and delivery Materials Testing Nondestructive Testing Failure Analysis Specimen Machining LTI FOR ALL OF YOUR TESTING AND SPECIMEN MACHINING
More informationProduct Order Quality Requirements Meggitt (Orange County), Inc.
Product Order Quality Requirements Meggitt (Orange County), Inc. Reference QP8-051, Purchase Order Quality Requirements QP8-055, Review/Control Supplier Documentation PP-401, Quality Assurance Codes 50-2-351,
More informationChange Notice Revision 2 adds a definition of NANDTB, and acceptance of the National Aerospace NDT Board of Australia.
Advisory Circular AC43-8 Revision 2 Non-destructive Testing 27 February 2015 General Civil Aviation Authority advisory circulars contain information about standards, practices, and procedures that the
More informationImproved Performance through the use of Defined Metrics. by Penny Dennehy The Boeing Company
Improved Performance through the use of Defined Metrics by Penny Dennehy The Boeing Company Background Airline metrics exist today (DAL, AAL, UAL, JAL, GECAS, CAL, KLM, UPS, FedEx, BAB, etc..) Initiatives
More informationNon-Destructive Test (NDT) and Non-Destructive Evaluation (NDE) Requirements
Table of Contents 1.0 Purpose/Scope/Timing... 2 1.1 Scope... 2 1.2 Communication... 2 1.3 Compliance Date... 2 2.0 Procedure / Quality Recd Requirements... 2 2.1 General Requirements... 2 2.2 Requirements
More informationSargent Controls & Aerospace 5675 West Burlingame Rd. Tucson AZ 85743 PHONE: (520) 744-1000 FAX: (520) 744-8054
Sargent Controls & Aerospace 5675 West Burlingame Rd. Tucson AZ 85743 PHONE: (520) 744-1000 FAX: (520) 744-8054 SUPPLIER EVALUATION CHECKLIST Date: Vendor: Address: City, State, Zip: Web Site: Prepared
More informationStandard Practice for Quality Control Systems for Nondestructive Testing Agencies 1
Designation: E 1212 99 AMERICAN SOCIETY FOR TESTING AND MATERIALS 100 Barr Harbor Dr., West Conshohocken, PA 19428 Reprinted from the Annual Book of ASTM Standards. Copyright ASTM Standard Practice for
More informationMTU Maintenance Dallas, Inc. Integrated Management System. MM 03D-03 Capability List Manual
Chapter 0 Page 2 of 15 0.1 Table of Contents 0 Title Page... 1 0.1 Table of Contents... 2 0.2 List of Effective Pages... 3 0.3 Record of Revision... 4 0.4 Reserved.........5 0.5 Distribution List... 6
More informationINTRODUCTION: PURPOSE:
UMBRA CUSCINETTI, INC. 2916 100 th Street SW Everett, WA 98204-1340 USA 425-743-2577 FAX: 425-347-0682 Printed versions may not be the latest. Suppliers shall utilize the latest version which can be found
More informationAEROSPACE QUALITY MANAGEMENT SYSTEM - 9100
AEROSPACE QUALITY MANAGEMENT SYSTEM - 9100 Dale K. Gordon Rolls-Royce Royce North America Past Chairman Americas Aerospace Quality Group April 11th, 2003 Edinburgh General Assembly 1 of 24 Aerospace Quality
More informationWhat you need to know about Nadcap
What you need to know about Nadcap Contents Welcome Letter from the Supplier Support Committee Chairperson 3 Nadcap Overview & Organization Structure 4 Nadcap Supplier Support Committee 6 Special Processes,
More informationComment Form for Industry Review of NAS 410, Rev 4 - Draft 1-2010+
Comment Form for Industry Review of NAS 410, Rev 4 - Draft 1-2010+ PLEASE PROVIDE THE FOLLOWING INFORMATION FOR EACH PERSON PROVIDING COMMENTS: Reviewer's Name: COSAC Company/Organization: FRENCH NANDTB
More informationCessna - Interiors Manufacturing Facility (IMF) Supplier Quality System Requirements
Cessna - Interiors Manufacturing Facility (IMF) Supplier Quality System Requirements Wichita KS Effective: 3-11-15 Rev. IR Page 1 of 6 1.0 Introduction This document establishes Cessna Interiors Manufacturing
More informationBoeing Commercial Airplanes Supply Management Procurement Quality Assurance Field Operations. Welcome to the Quality Information Workshop
Boeing Commercial Airplanes Supply Management Procurement Quality Assurance Field Operations Welcome to the Quality Information Workshop 1 Boeing Commercial Airplanes Supply Management Procurement Quality
More informationEN 4179/NAS 410 Interpretation
EN 4179/NAS 410 Interpretation The NANDTB has adopted NAS 410 / EN 4179 in lieu of AS 3669 as the standard for the qualification and approval of NDT technicians. Employers applying these standards sometimes
More informationNON-DESTRUCTIVE TESTING FULL SCOPE OF INTEGRATED NDT SERVICES
NON-DESTRUCTIVE TESTING FULL SCOPE OF INTEGRATED NDT SERVICES RIGHT SERVICE MAXIMUM RETURN Whether it is in fabrication, pipe manufacturing, pipeline, plant construction, chemical, petrochemical plants,
More informationTraining Course Schedule
Training Course Schedule 2016 AINDT EXAMS HELD AT THE END OF ALL ISO 9712 COURSES. INITIAL EXAM COSTS INCLUDED IN COURSE FEES. Satisfactory completion of an ATTAR training course is only part of the process
More informationAEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR NON-DESTRUCTIVE TESTING IRISH STANDARD I.S. EN 4179:2006.
IRISH STANDARD I.S. EN 4179:2006 ICS 49.020 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland AEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR Tel: +353 1 807 3800 Fax:
More informationRG 7 Accreditation for Inspection Bodies Performing Non-Destructive Testing
This publication contains policy, recommendations and guidance applicable to UKAS accredited inspection bodies RG 7 Accreditation for Inspection Bodies Performing Non-Destructive Testing Contents Section
More informationSupplier Quality System Requirements
Page 1 of 18 TITLE Supplier Quality System Requirements WARNING This document is the property of United Technologies Corporation (UTC). You may not possess, use, copy or disclose this document or any information
More informationReliable. Innovative. Accessible. Your life cycle support partner.
Reliable. Innovative. Accessible. Your life cycle support partner. Our strategic focus on innovation and operational excellence combined with our long-standing experience with defence forces around the
More informationTechnical Notes NDT 001 Specific Requirements for Non- Destructive Testing Laboratories
ACCREDITATION SCHEME FOR LABORATORIES Technical Notes NDT 001 Specific Requirements for Non- Destructive Testing Laboratories Technical Notes NDT 001, Apr 14 The SAC Accreditation Programme is managed
More informationhybrid fuel cell bus
hybrid fuel cell bus PURE EMOTION PURE capacity The full passenger capacity of a standard diesel bus seats 34 standees 70 (7 passengers per sqm) total 104 Thanks to the three axles of the Van Hool A330
More informationMarketsandMarkets. - Global Trends & Forecasts to 2014-2020. sales@marketsandmarkets.com www.marketsandmarkets.com
NONDESTRUCTIVE TESTING MARKET By Technology (Visual, Magnetic Particle, Electromagnetic, Liquid Penetrant, Radiography, Ultrasonic) & Application (Aerospace, Defense, Automotive, Oil & Gas, Infrastructure,
More informationElectronics Task Group Newsletter
Electronics Task Group Newsletter July 2008 Issue Highlights From the Chair and Vice Chair... 1 Nadcap Meeting Schedule... 2 From eauditnet Support... 2 Document Location... 2 Upcoming equalearn Event...
More informationReach Higher with Inspection Academy GE s Inspection Technologies Global Knowledge Center. www.geinspectionacademy.com
Reach Higher with Inspection Academy GE s Inspection Technologies Global Knowledge Center www.geinspectionacademy.com Sharing knowledge. Shaping technology. At GE, we know the value of investing in your
More informationQUALITY MANAGEMENT SYSTEM FOR THE AEROSPACE INDUSTRY
I International Symposium Engineering Management And Competitiveness 2011 (EMC2011) June 24-25, 2011, Zrenjanin, Serbia QUALITY MANAGEMENT SYSTEM FOR THE AEROSPACE INDUSTRY Branislav Tomić * Senior Quality
More informationSperry Rail International A Rockwood Company. Non-destructive Testing of Rail
Non-destructive Testing of Rail Bob Crocker Background Hither Green disaster November 1967 Section of rail at a bolted joint came away Caused by cracks growing from bolt holes Realisation that cracks too
More informationCornerstone Wealth Management
Item 1- Cover Page David A. Gomersall, CPA Cornerstone Wealth Management 835 Sharon Drive, Suite 280 Westlake, OH 44145-7704 (440) 899-4000 www.cornerstonewealthmgmt.com March 19, 2014 This Brochure Supplement
More informationNon Destructive Testing Consultancy Welding Materials Testing Training
Non Destructive Testing Consultancy Welding Materials Testing Training Introduction Applied Inspection is an ISO 9001:2008 and Link-Up accredited company providing non-destructive testing and training,
More informationThe World Nuclear Supply
The World Nuclear Supply Chain An Overview Greg KASER Staff Director NEA International WPNE Workshop Paris 11 March 2014 Outline of Presentation 1. About WNA 2. Value of: New construction Early dismantlement
More informationAerospace & Defence Acceleration Programme & Technology. ADAPT...to secure market opportunities
Aerospace & Defence Acceleration Programme & Technology ADAPT...to secure market opportunities AeroDNA supports ambitious companies to establish world class aerospace infrastructure in established & emerging
More informationSEMINAR LIST Drive Systems Technology, Inc. Mechanical Power Transmission Consultants
SEMINAR LIST Drive Systems Technology, Inc. Mechanical Power Transmission Consultants Raymond J. Drago, PE, Chief Engineer 24 Marlborough Lane Glen Mills, PA 19342-1519 V: 610-358-0785; F:610-358-2776;
More informationYou count on availability. We provide reliable solutions.
You count on availability. We provide reliable solutions. Your global partner for military aviation Customers around the globe are faced with challenges every day, including increased demands on fleet
More informationEA-04/15. Accreditation. For Non-Destructive. Testing. Publication. Reference. EA - 4/15 Accreditation for Non-Destructive Testing PURPOSE
Publication Reference EA-04/15 Accreditation For Non-Destructive Testing PURPOSE This publication provides detailed guidance for organisations carrying out non-destructive testing as an accredited activity
More informationTWI INDIA CSWIP COURSE AND EXAMINATION FEES 2016 Course / Examination description. CSWIP 3.2 Senior Welding Inspector
TWI INDIA CSWIP COURSE AND EXAMINATION FEES 2016 Course / Examination description FEE CSWIP 3.0 Visual Welding Inspector Course and Examination Package 61,200 Exam only 26,500 Course Only 44,800 3.0 Retest
More informationQuality Assurance Requirements. For. Pratt & Whitney/Space Propulsion, Chemical Systems Division
Quality Assurance Requirements For Pratt & Whitney/Space Propulsion, FORM 06.13.02.02 (REV. 6) Page 1 of 14 Table of Contents SECTION I QUALITY SYSTEMS REQUIREMENTS... 5 1. QUALITY ASSURANCE PROGRAM...
More informationAS9100 B to C Revision
AS9100 B to C Revision Key: Additions Deletions Clarifications 1.2 Application AS9100C Key Additions This standard is intended for use by organizations that design, develop and/or produce aviation, space
More informationSGS WHEN YOU NEED TO BE SURE
SGS WHEN YOU NEED TO BE SURE FOR MANUFACTURERS, SUPPLIERS AND OPERATORS Aviation is one of the most exciting industries in the world and also one of the safest, guaranteed by the highest standards of quality,
More informationSUPPLIER QUALITY PROGRAM, V (U)
FEDERAL MANUFACTURING & TECHNOLOGIES PQR 1060 PAGE 1 OF 17 SUPPLIER QUALITY PROGRAM, V (U) CHANGE HISTORY ISSUE DESCRIPTION OF CHANGE AUTHOR DATE E CORRECTED CHANGE HISTORY S. L. HALTER 10/18/2000 F UPDATED
More informationNOTICE OF ACCREDITATION ACTIONS TAKEN BY THE JRCERT BOARD OF DIRECTORS DECEMBER 9, 2014
NOTICE OF ACCREDITATION ACTIONS TAKEN BY THE JRCERT BOARD OF DIRECTORS DECEMBER 9, 2014 See the Standards for an Accredited Educational Program for specific objectives mentioned in this report. Initial
More informationSupplier Business Profile
Page 1 of 6 Supplier Business Profile Dear Supplier, Once again it is time for TurboCombustor Technology, Inc. (TCT), to update our files. Please complete the attached Small Business Profile. All Suppliers
More informationSTAREGISTER INTERNATIONAL INC 250 NORTH WASHTENAW AVENUE CHICAGO, ILLINOIS 60612
This is to signify that STAREGISTER INTERNATIONAL INC 250 NORTH WASHTENAW AVENUE CHICAGO, ILLINOIS 60612 Management System Certification Body MSCB-107 has met the International Accreditation Service (IAS)
More informationReinforcing Cyber Security -- Taiwan s Roadmap. 張 善 政 S-C (Simon) Chang 行 政 院 副 院 長 Vice Premier Aug. 26 th, 2015
More information
DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR'S OFFICE RESPIRATORY CARE - GENERAL RULES
DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR'S OFFICE RESPIRATORY CARE - GENERAL RULES (By authority conferred on the director of the department of licensing and regulatory affairs by sections
More informationNOTICE OF ACCREDITATION ACTIONS TAKEN BY THE JRCERT BOARD OF DIRECTORS AUGUST 18, 2015
NOTICE OF ACCREDITATION ACTIONS TAKEN BY THE JRCERT BOARD OF DIRECTORS AUGUST 18, 2015 See the Standards for an Accredited Educational Program for specific objectives mentioned in this report. Initial
More informationState Annual Report Due Dates for Business Entities page 1 of 10
State Annual Report Due Dates for Business Entities page 1 of 10 If you form a formal business entity with the state, you may be required to file periodic reports on the status of your entity to preserve
More informationServing the 21st Century Design Engineer
Serving the 21st Century Design Engineer Design News' Suite of Events and Conferences DesignNews.com Who We Are Design News, along with Design & Manufacturing, ATX, Quality, Electronics, and AeroCon events
More informationPrerequisite: Review of the ISO 9001-2008 Standard prior to attendance is strongly suggested. Bring a copy to the training class.
2 DAY ISO 9001-2008 *INCLUDES SPECIFIC ASPECTS OF ISO 9001-2015* INTERNAL AUDITOR TRAINING 2015 Course Offering Description: This program is designed to develop internal quality management systems auditing
More informationSupplier Quality Assurance Requirements Manual
1701 West Tacoma Broken Arrow, Ok. 74012 Supplier Quality Assurance Requirements Manual Approved: Bryan Sanderlin President/COO/CEO OSECO, Inc. Darrel Bilke Quality Assurance Manager OSECO, Inc. 1 Record
More informationVENDOR QUALIFICATION APPROVAL FORM
COMPANY INFORMATION: Company Name: Jet Aviation St. Louis, Inc. Address (Street, City, State) Other Property Locations: Website: Repair Station Certificate No. With Class Rating: Date of Last FAA Audit:
More informationGroup AAQG Project #56
Americas Aerospace Quality Group AAQG Project #56 Globally Harmonized Oversight Process AS9104-2 P56 Harmonized Oversight Process - AS91XX Team Members Champion - Mike Roberts Leader Tim Lee Jean-Louis
More informationTT electronics IMS Supplement to Purchase Order Quality Clauses TT electronics Purchase Order
Q01 Quality System Requirements The supplier shall establish and maintain a quality system that conforms to the requirements of ISO 9001:2008 or AS9100 Rev. C Q02 Supplier s Quality Plan The supplier shall
More informationFederation of State Boards of Physical Therapy Jurisdiction Licensure Reference Guide Topic: Continuing Competence
This document reports CEU requirements for renewal. It describes: Number of required for renewal Who approves continuing education Required courses for renewal Which jurisdictions require active practice
More informationWho provides this training? Are there any requirements? The parents/guardians and the doctor go through the medication curriculum with the student.
AL AK AZ AR Student, if they have a chronic condition school nurse or school administrators The student, if their parent/guardian authorizes them to. Trained school personnel can also administer Students
More informationTHE VALUE OF DICONDE IN MULTI-MODAL NDT ENVIRONMENTS
THE VALUE OF DICONDE IN MULTI-MODAL NDT ENVIRONMENTS Matthias JOBST, Andrea KOETZ and Sue CLENDENING GE Sensing & Inspection Technologies GmbH, Hürth, Germany, Skaneateles, and Lewistown USA History Abstract:
More informationTOM DOGGART, P.E. 49 Brockett Rd Niantic CT 06357 704-517-3038 info@nomadmet.com www.nomadmet.com EDUCATION:
TOM DOGGART, P.E. 49 Brockett Rd Niantic CT 06357 704-517-3038 info@nomadmet.com www.nomadmet.com EDUCATION: 1994 Master of Science in Materials Science, concentrating in Precision Manufacturing University
More informationLeadership Programs and Training
100 North Riverside Chicago, IL 60606-1596 www.boeing.com Locations Operations in 38 states and 70 countries. Leadership Program Contact www.boeing.com/employment/college/ bcfpfaq.html Leadership Programs
More informationFederation of State Boards of Physical Therapy Jurisdiction Licensure Reference Guide Topic: Continuing Competence
This document reports CEU (continuing education units) and CCU (continuing competence units) requirements for renewal. It describes: Number of CEUs/CCUs required for renewal Who approves continuing education
More informationTERMS AND CONDITIONS FOR AWARDING COFREND/COSAC CERTIFICATES IN THE AEROSPACE SECTOR CCA PP 94 001
COMITE SECTORIEL AEROSPATIAL DE CERTIFICATION - Agents de Contrôle Non Destructif Approuvé par la CONFEDERATION FRANCAISE POUR LES ESSAIS NON DESTRUCTIFS REVISION: 06 12/ 2009 TERMS AND CONDITIONS FOR
More informationNon-destructive Testing ISO/IEC 17025 Application Document
Non-destructive Testing ISO/IEC 17025 Application Document July 2013 Copyright National Association of Testing Authorities, Australia 2013 This publication is protected by copyright under the Commonwealth
More informationNon-Destructive Testing Services, Inc. www.nondestructivetesting.com
Non-Destructive Testing Services, Inc. www.nondestructivetesting.com NON-DESTRUCTIVE TESTING SERVICES (NDTS) Non-Destructive Testing Services, Inc. (NDTS) is a full-service inspection company providing
More informationInitial Accreditation
The following Final Actions were taken by the CCNE Board of Commissioners at its meeting on October 27-29, 2011. UPDATED - December 9, 2011 Initial Accreditation Accredited Program(s) Accreditation Term
More informationQuality Management System Manual Revision G
Revision G 2800 Louis-Lumière, Suite 100, Québec (QC), G1P 0A4, CANADA Table of Contents Mission... 3 What We Do... 3 Our Values... 3 Passion... 3 Customer Focus... 3 Reliability... 3 Empowerment... 3
More informationArmy National Guard Aviation Nondestructive Testing Program
National Guard Regulation 750-410 Maintenance of Supplies and Equipment Army National Guard Aviation Nondestructive Testing Program Departments of the Army and the Air Force National Guard Bureau Arlington,
More informationStandardized Pharmacy Technician Education and Training
Standardized Pharmacy Technician Education and Training Kevin N. Nicholson, RPh, JD Vice President, Pharmacy Regulatory Affairs National Association of Chain Drug Stores May 19, 2009 Overview of how technicians
More informationHelical Products Co., Inc.
Q01 GENERAL REQUIREMENTS 1. Supplier Responsibilities 1.1. Delivery Certification By delivering products or services on the Contract, the Supplier certifies that such products or services are in compliance
More informationEddy-current testing - Non-destructive testing for flaw detection of metals, coatings and carbon fibres
Technology Offer Eddy-current testing - Non-destructive testing for flaw detection of metals, coatings and carbon fibres Summary A German SME offers the development of task specific eddy-current based
More informationNON-DESTRUCTIVE TESTING OF PIPELINES. L. Annila. Abstract
NON-DESTRUCTIVE TESTING OF PIPELINES L. Annila Abstract This paper shall present different, contemporarily available non-destructive testing (NDT) methods of pipelines and compare them to each other from
More informationohio state university institute of aviation undergraduate and Phd student exchange
transactions of the institute of aviation ISSN 2300-5408 no. 4 (237), pp. 7-12, Warsaw 2014 ohio state university institute of aviation undergraduate and Phd student exchange ProfeSSor WItold WIśNIoWSkI*,
More informationSTILO INTERNATIONAL PLC
16 March 2016 STILO INTERNATIONAL PLC Preliminary Announcement of Results for Year Ended 31 December 2015 Stilo International plc ("Stilo", the Group or the "Company") today announces its results for the
More informationCapabilities at a glance
More mobility for the world The Lufthansa Technik Group Capabilities at a glance Your needs shape our support Whether you are looking for the repair of a single component or a global maintenance agreement
More informationSTATE OF OKLAHOMA. 2nd Session of the 53rd Legislature (2012) AS INTRODUCED
STATE OF OKLAHOMA nd Session of the rd Legislature () HOUSE BILL AS INTRODUCED By: Quinn An Act relating to labor; amending 0 O.S., Section 00., which relates to renewal of registration by professional
More informationNurse Practitioners and Physician Assistants in the United States: Current Patterns of Distribution and Recent Trends. Preliminary Tables and Figures
Nurse Practitioners and Physician Assistants in the United States: Current Patterns of Distribution and Recent Trends Preliminary Tables and Figures Kevin M. Stange, PhD Assistant Professor Gerald R. Ford
More informationLAZIO AEROSPACE INTERNATIONAL TAKE OFF: COMPETENCE, EXCELLENCE, CREATIVITY. Company name: COMPANY PROFILE. Company details.
LAZIO AEROSPACE INTERNATIONAL TAKE OFF: COMPETENCE, EXCELLENCE, CREATIVITY. Company name: COMPANY PROFILE Company details Address: Post code: Town: Country: Phone: Email: Date of foundation: Contact person:
More informationOverview Presented by: Boyd L. Summers
Overview Presented by: Boyd L. Summers Systems & Software Technology Conference SSTC May 19 th, 2011 1 Report Documentation Page Form Approved OMB No. 0704-0188 Public reporting burden for the collection
More informationApplication form. Academic year applying for. Please circle modality. CT MRI Both. Social Security Number. Address. Phone (work) (home) Email address
1 Application form Bon Secours St. Mary s Hospital s School of Medical Imaging Continuing Education Important Note Bon Secours School of Medical Imaging makes selection of applicants without regard to
More informationReverse Mortgage Source List
1st Financial 800-20-003 www.firstloans.net HECM FL MD MI SC 25 Depends on the circumstances. Advanced Mortgage Services 81-659-6555 www.ams-loan.com MA 6 Please call for updated rates and closing fees.
More informationQUALITY DOSSIER. We Assure Quality
UALITY DOSSIER We Assure uality WE ASSURE YOU WE ASSURE YOU WE ASSURE YOU WE ASSURE YOU WE ASSURE WE ASSURE YOU WE ASSURE YOU WE ASSURE WE YOU YOU WE ASSURE YOU WE ASSURE YOU WE ASSURE WE ASSURE YOU WE
More informationLooking into other Industries Qualification of NDT for Swiss Nuclear Utilities
4th International Symposium on NDT in Aerospace 2012 - Th.2.B.4 Looking into other Industries Qualification of NDT for Swiss Nuclear Utilities Klaus DRESSLER, Daniel ALGERNON, Philip KICHERER SVTI Swiss
More informationGE Inventory Finance. Unlock your cash potential.
GE Inventory Finance Unlock your cash potential. Benefits of Floor Planning Increased sales Interest-free extended terms Ecommerce / Customer Online Management Systems (COMS) (Purchase Approvals / Inventory
More informationBlowing the Whistle: SEC Style
Blowing the Whistle: SEC Style Presented to: The Institute of Internal Auditors Houston Chapter David Taylor Partner, Locke Lord LLP March 5, 2012 Overview How did we get here? Dodd-Frank Whistleblower
More informationBroadband Technology Opportunities Program: Sustainable Broadband Adoption and Public Computer Centers
Broadband Technology Opportunities Program: Sustainable Broadband Adoption and Public Computer Centers National Telecommunications and Information Agency (NTIA) U. S. Department of Commerce Funded by the
More information2012 National Student Satisfaction and Priorities Report
2012 National Student Satisfaction and Priorities Report Appendix One Career and Private Schools Form A This document is one of two appendices to the 2012 National Student Satisfaction and Priorities Report.
More informationApplication of Welding Standards in Hong Kong. S. K. Babu Laboratory Manager - Foundation Techniques Ltd
Application of Welding Standards in Hong Kong S. K. Babu Laboratory Manager - Foundation Techniques Ltd Introduction: This paper summarizes the current welding standards practiced in Hong Kong & also outlines
More informationNon-Destructive Testing
Non-Destructive Testing Bureau Veritas is one of the largest Testing, Inspection and Certification service providers in the world. First established in 1828, Bureau Veritas now spans the globe with a network
More informationBucharest, Romania 44 Ficusului Blvd. Zip code 013975, sector 1 www.romaero.com ROMAERO s premises - in Northern Bucharest, near Baneasa Airport Platform access for all categories of aircraft direct road
More informationEnrollment Snapshot of Radiography, Radiation Therapy and Nuclear Medicine Technology Programs 2014
Enrollment Snapshot of, Radiation Therapy and Nuclear Medicine Technology Programs 2014 January 2015 2015 ASRT. All rights reserved. Reproduction in any form is forbidden without written permission from
More informationAPPLICATION FOR CAR 145/CAR M SUBPART F APPROVAL Form No.: AWF-AMO-001
Please refer to Appendix 1 for Instructions to fill this form and Appendix 2 for GCAA application requirements: 1. Name of Organization : 2. Address(es) for which approval is sought/held: (a) Physical
More information