Dräger Technical Training North America Optimizing productivity and safety / January June

Transcription

1 Draeger Medical, Inc. has been accredited as an Authorized Provider by the International Association for Continuing Education and Training (IACET), D Old Meadow Road, Suite 500, McLean, VA 22102; (703) Dräger Technical Training North America Optimizing productivity and safety 2015 / January June ANESTHESIA VENTILATION WARMING THERAPY MONITORING & HEALTHCARE IT

2 02 Dräger Technical Training D _neu North America

3 03 CONTENTS Introduction 04 General Information 05 Travel and Hotel Information 06 Anesthesia 07 Ventilation 08 Warming Therapy 09 Monitoring & HealthCare IT Course Codes and Schedules Registration 14 15

4 04 Comprehensive Education Technology for Life The expression Technology for Life has more behind it than just excellent equipment. We understand the support required to be successful. Dräger Training plays a major role in enhancing care processes. Our holistic approach includes exceptional support capabilities, which help ensure that your care processes run as smoothly and efficiently as possible. After all, equipment provided for life support requires capable personnel for proper operation and service. Our education and training tools make the most of your resources. We offer a modular approach to education and training in three different areas from basic device training to application know-how and management knowledge skills. With improved equipment knowledge and user s skills, equipment can be used more effectively and confidently. Enhancing management knowledge skills empowers managers and staff to improve care processes. Dräger is committed to providing technical training courses designed to assist you in meeting your obligations of providing productivity and safety with Dräger quality products and Dräger user and maintenance courses. THE DRÄGER TRAINING MISSION It is our goal to enhance the knowledge and proficiency of our customers on the maintenance and service of their Dräger products. D

5 05 General Information LANGUAGE, SCHEDULE, DRESS CODE All Dräger technical education courses are conducted using the English language and begin promptly at 8:30 a.m. (classrooms open at 8:00 a.m.) and end at 4:30 p.m. every day. Dress code is business casual. No shorts or open toe shoes are permitted. PRE-REQUISITES AND CONTENT The courses are designed with the idea that the participants have been exposed to the general function of the product(s) being discussed. Dräger does not perform component repairs to printed circuit board assemblies in the field and accordingly does not recommend the participant doing so. Component repairs are done only at Dräger s manufacturing plant by specifically trained technicians, using appropriate and sophisticated test fixtures and equipment. All courses have been designed with this philosophy in mind. COPYRIGHT What you see and hear during all Dräger technical courses are copyrighted and the property of Dräger. Audio and video recordings are not permitted. TUITION Your tuition payment covers the cost of all course materials, instruction, lunch and refreshments. Prices are subject to change without notice. All travel, expenses and hotel accommodations, including meals outside of Dräger, are the sole responsibility of each registered participant. Tuition payment MUST be provided at the time of registration. REGISTRATION AND CONFIRMATION Seminar space is limited and students are enrolled on a first-come, first-served basis. A letter of confirmation will be sent to the registrant via U.S. Mail, fax or to confirm registration. Read this letter carefully. If corrections are needed, contact our Triage Center immediately. COURSE MATERIALS All technical service manuals and service-related materials are in electronic format only. Each student will receive a one year license (from the date training was completed) to ServiceConnect which provides access to the technical documentation for which the student is trained. A signed license agreement is required to access ServiceConnect and is available for purchase beyond the first year. For minimum computer requirements and a brief description of the ServiceConnect software and additional forms required to receive this software, please contact the DrägerService Triage Center at , option 4. TESTING Each course concludes with a timed written or practical exam. Seminar participants must attain a grade of 70% or better to satisfactorily complete each course. Certificates and Continuing Education Units (CEU s) are only issued following satisfactory completion for the course. A grade transcript will be issued upon request for a nominal fee. Those participants that attain a grade less than 70% can retest for a $ administrative fee which can be taken the same day (time permitting) or within a six month period. Attendance and successful completion of a technical education course does not guarantee that the participant may purchase parts for repair or replacement from Dräger. Nor does it imply that the participant has a complete working knowledge of Dräger equipment. It is the institution s responsibility to determine the technical aptitude of the technician. Attendance and successful completion of the Monitoring and Healthcare IT training courses does not prepare the student for installation or configuration of Dräger s complex systems. The courses are designed to provide basic information for first call troubleshooting and basic repairs. These systems should be installed by an appropriately trained Dräger representative(s), under the guidelines of approved procedures established by Dräger. CANCELLATION POLICY Substitute attendees are not permitted. Training either purchased by a healthcare institution or included in a strategic alliance agreement, may only be used by individuals directly employed by that healthcare institution. Cancellations received, in writing, 15 business days prior to the course will not be billed for the seminar. A fee of 50% of the total tuition will be charged for cancellations less than 15 business days of the scheduled seminar date. Please note that if you do not cancel in writing and do not attend, you are still responsible for payment. Dräger reserves the right to cancel or change the course dates due to low enrollment or other unforeseen circumstances. If Dräger cancels a course, you will be provided with a minimum of 15 business day s notice and the full tuition will be refunded or applied toward any future course. Cancelled students will be placed on a priority list for the next available course. Dräger cannot be held liable for non-refundable travel expenses in the event of a course cancellation.

6 06 Travel & Hotel Information TRAVEL All travel expenses and reservations including airline, rental car and hotel accommodations are the responsibility of the participant. Lunches on seminar days are provided and included as part of the tuition fees. To allow for adequate travel time to the airport, departing flights should not be scheduled less than three (3) hours following the conclusion of the course. All seminars end no earlier than 4:30 p.m. on the final day. Participants are responsible for arranging their own transportation to and from the airport and the Dräger facilities. Information concerning rental cars should be obtained from your travel service provider. Our corporate facilities are access badge controlled and students should report to the main lobby upon their initial arrival on the first day of the seminar to obtain a visitor badge. The Telford, PA (USA) Training Center is located approximately 45 miles northwest of Philadelphia International Airport and approximately 35 miles south of Lehigh Valley International Airport. The corporate address is: Draeger Medical, Inc Quarry Rd. Telford, PA The Mississagua, ON (Canada) Training Center is located approximately 1 mile southeast of Toronto Pearson International Airport. The corporate address is: Draeger Medical Canada, Inc Skymark Ave, Unit 1&2 Mississauga, ON L4W 4Y6 HOTEL ACCOMMODATIONS (These locations are suggestions the participant is not required to stay at these facilities) Near the Telford, PA (USA) Training Center Staybridge Suites (215) Garden Golf Boulevard North Wales, PA Homewood Suites (215) Pennbrook Parkway Lansdale, PA Holiday Inn Express (215) John Fries Highway Quakertown, PA Hampton Inn (215) John Fries Highway Quakertown, PA Spring Hill Suites (215) John Fries Highway Quakertown, PA Marriott Courtyard - Montgomeryville (215) Dekalb Pike North Wales, PA Residence Inn - Montgomeryville (267) Bethlehem Pike North Wales, PA Near the Mississuagua, ON (Canada) Training Center Homewood Suites Toronto Airport (416) Eglinton Avenue West Toronto, ON M9C 5K5 TownePlace by Marriott-Airport (800) Orbitor Drive Mississauga, ON L4W 4X2 Residence Inn by Marriott Mississauga (905) Creekbank Road Mississauga, ON L4W 5R2

7 07 Anesthesia APOLLO CEU S: DSU3081NET $10, None During this course, the biomedical professional will receive information about the new and advanced technologies associated with the Apollo anesthesia machine. This anesthesia machine incorporates additional ventilation features not found on other anesthesia devices. This course includes instruction on pneumatic systems and components, ventilator/absorber systems, monitoring capabilities, and Preventive Maintenance Inspection procedures (Test Certificate). FABIUS FAMILY CEU S: DSU3021NET $5, None This course is designed to introduce the biomedical professional to the Fabius family of anesthesia machines. All of these anesthesia machines incorporate ventilation features and hardware not found on other anesthesia devices, as well as new technologies in the gas delivery system. The course includes instruction on the pneumatic and absorber systems, ventilator, monitor technologies, and a detailed Preventive Maintenance Inspection procedure. FABIUS MRI CEU S: 0.6 (WITHIN 3 YEARS) DSU3022NET $1, Fabius Family This course is designed to introduce the biomedical professional to the Fabius MRI anesthesia machine. This course will focus on the differences between the Fabius MRI and the rest of the Fabius family. Included will be disassembly and reassembly of the unit and a complete peruse checkout. This course is designed as an experiential exercise with presentations on the MRI environment. An instructor is present at all times to assist and answer questions. ZEUS INFINITY EMPOWERED CEU S: MQ00268 DSU3085NET $13, *See below During this course, the biomedical professional will receive information about the advanced technologies associated with the Zeus IE anesthesia machine. This anesthesia machine incorporates additional ventilation features not found on other anesthesia devices. This course includes instruction on pneumatic systems and components, ventilator/absorber systems, monitoring capabilities, and Preventive Maintenance Inspection procedures (Test Certificate). Canada location only. * Prerequisite: Basic knowledge of medical technology; Evita series or Primus seminar (recommended that current service hours for ventilation & anesthesia devices are 50% of workload); minimum of 8 Zeus IE machines in account; basic knowledge of IT and hemodynamic monitoring is recommended. ZEUS INFINITY EMPOWERED NETWORKING CEU S: MQ00269 DSU3086NET $1, Infinity Network Fundamentals This one day seminar compliments the Zeus IE training. Students will configure a Zeus IE to work within the Dräger Infinity network. The network will comprise of an Infinity Delta monitor, an Infinity Acute Care System monitoring solution, Infinity Gateway software suite and a switch and network cabling. They will also configure the Zeus IE for web access. Students will learn about the Dräger Remote Service offering and how to configure the Zeus IE for use with the ServiceConnect Gateway. Canada location only. PRIMUS CEU S: MQ00230 DSU3084NET $10, None During this course, the biomedical professional will receive information about the advanced technologies associated with the Primus anesthesia machine. This anesthesia machine incorporates additional ventilation features not found on other anesthesia devices. This course includes instruction on pneumatic systems and components, ventilator and monitoring capabilities, and Preventive Maintenance Inspection procedures (Test Certificate). Canada location only.

8 08 Ventilation EVITA INFINITY V500 / BABYLOG VN500 CEU S: MQ00231 DSU3212NET $3, None During this course, students will become skilled in identifying assemblies/subassemblies and enhance their knowledge and understanding of device functions. Basic troubleshooting as well as hands-on training will be included. Upon successful completion of this course, students will be able to identify and understand the functions of the pneumatic and electrical systems of the V500 and VN500, including the Human Interface Testing (HIT) software and the optional gas supply unit (GS500). The student will also learn how to perform a scheduled Preventive Maintenance Inspection. Note: A LAPTOP IS NOT REQUIRED DURING THIS SEMINAR. However, working with the V500/VN500 requires the participant to have a laptop computer to perform troubleshooting and the PMI procedure. The laptop must have the following capabilities: Microsoft Windows XP or later/nt SP6, NOT including Windows Vista or Windows 7; Adobe Acrobat 7.0 or higher; Intel Pentium 4 or higher processor with at least 512 MB of RAM; DVD-ROM drive capable of reading dual-layered DVD s; access to an account. EVITA 4 / EVITA 2 DURA / EVITA XL CEU S: DSU3213NET $3, None This course will highlight the built-in diagnosis and upgrading tools of the Evita series. The student will become skilled in identifying assemblies/ sub-assemblies and gain a depth of knowledge and understanding of the functions and basic troubleshooting of these devices. Upon successful completion of this course, the student will be able to identify and understand the functions of the detachable user interface (Evita 4 / XL), the integrated interface (Evita 2), and the pneumatic and electrical systems (Evita 4 / 2 / XL). The student will also be able to demonstrate competence in performing a scheduled Preventive Maintenance Inspection. SAVINA CEU S: DSU3222NET $ Savina 300 (within 3 years) This course will highlight the built-in diagnosis and upgrading tools of the Savina. The student will become skilled in identifying assemblies/sub-assemblies and gain a depth of knowledge and understanding of the device functions through various lecture and hands-on exercises. Upon successful completion of this course, the student will be able to identify and understand the functions of the operator control panel and the pneumatic and electrical systems. The student will also be able to complete a Preventive Maintenance Inspection, perform basic troubleshooting and operation verification. SAVINA 300 CEU S: MQ00177 DSU3223NET $3, None This course is designed to provide the biomedical professional with specific information related to the Savina 300 operating functions which differ from the Savina ventilator. Upon successful completion of this course, the student will be able to identify and understand the functions of the pneumatic and electrical systems and be familiar with the Preventive Maintenance Inspection. OXYLOG 3000 / OXYLOG CEU S: DSU3273NET $2, None Upon successful completion of this course, the student will be able to identify and understand the functions of the pneumatic and electronic systems of the Oxylog 3000 ventilator. The student will also be able to perform basic troubleshooting and demonstrate the proper techniques in the disassembly, assembly and repair of these devices. In addition, the student will learn how to perform the operation verification and complete a scheduled Preventive Maintenance Inspection.

9 09 Ventilation CARINA CEU S: DSU3215NET $2, None Upon successful completion of this course, the student will be able to identify and understand the functions of the pneumatic and electronic systems of the Carina ventilator. The student will also be able to perform basic troubleshooting and demonstrate the proper techniques in the disassembly, assembly and repair of this device. In addition, the student will learn how to perform the operation verification and complete a scheduled Preventive Maintenance Inspection. Warming Therapy OPEN WARMING THERAPY SYSTEMS CEU S: 0.6 CLASS (WITHIN 3 YEARS) Babytherm 8004/ DSU3550NET $2, None Radiant Warmer DSU3540NET $2, None and Resuscitaire Birthing Room Warmer Upon successful completion of any one of these courses, the student should be able to identify and understand the functions of the heating, controlling and monitoring systems. The student will also be able to troubleshoot and demonstrate the proper techniques in the disassembly, assembly and repair of these devices. In addition, the student will learn how to implement an upgrade, operational verification and complete a scheduled Preventive Maintenance Inspection. CLOSED WARMING THERAPY SYSTEMS CEU S: 1.2 CLASS (WITHIN 3 YEARS) Caleo DSU3560NET $2, None Globe-Trotter GT MQ09299 DSU3496NET $3, None Isolette C2000 & DSU3530NET $2, None Isolette 8000 TI500 Globe-Trotter DSU3495NET $2, None Neonatal Transport System Upon successful completion of any one of these courses, the student will be able to identify and understand the functions of the ventilation (Globe-Trotter only), heating, humidifying, controlling, O2 supply, power supply and monitoring systems. The student will also be able to troubleshoot the equipment and demonstrate the proper techniques in the disassembly, assembly and repair of these devices. In addition, the student will learn how to implement an upgrade, operational verification and complete a scheduled Preventive Maintenance Inspection.

10 10 Monitoring & HealthCare IT Attendance and successful completion of the Monitoring and Healthcare IT training courses does not prepare the student for installation or configuration of Dräger s complex systems. The courses are designed to provide basic information for first call troubleshooting and basic repairs. These systems should be installed by an appropriately appointed, technically-trained Dräger representative(s), under the guidelines of approved procedures established by Dräger. NETWORK FUNDAMENTALS THEORY DSU3603NET $1, None This seminar introduces the student to fundamental computer networking concepts and how they re applied to Dräger s Infinity Omega and Omega-S patient monitoring solutions. A list of the basic networking concepts discussed and applied will be: Networking topologies (wired), their necessary communication protocols, and terminology. TCP/IP network configuration (addressing, subnetting and planning) and how it is applied to integrate with the Infinity Omega and Omega-S. LAN and WAN technologies, and how Infinity Omega and Omega-S solutions integrate with each. To fully grasp the concepts of networking in regards to Dräger s Infinity Omega and Omega-S solutions, it is highly recommended that the student attend this course regardless of their IT skillset. ADVANCED INFINITY NETWORKING DSU3604NET $1, *See below (within course description) This seminar continues where the Network Fundamentals Theory seminar left off. It introduces the student to networking concepts and how they re applied to the rest of the Infinity Monitoring and Healthcare IT products. This seminar will be a combination of lecture and hands-on learning using the latest networking applications and Dräger equipment. Each student will be required to configure multiple devices including, but not limited to, Cisco 2600 series routers, switches and a host of Dräger Infinity products. This seminar is required for networking other Dräger Monitoring and IT systems. A list of the basic networking concepts discussed and applied will be: Networking topologies (wireless), their necessary communication protocols, and terminology. LAN and WAN technologies, and how Dräger s Infinity Monitoring and IT systems integrate with each. VLAN planning and application using managed switches and wireless devices. Basic routing concepts using Cisco devices for configuration and practical application within an Infinity network. The student will also be challenged with a number of hands-on exercises that are centered around troubleshooting, error management and proper network capacity usage techniques. To fully grasp the concepts of Dräger s Infinity Monitoring and IT systems, it is highly recommended that the student attend this course regardless of their IT skillset. The methods used to fully configure and integrate a Dräger device onto an Infinity network go beyond basic computer networking and configuration skills. This Advanced Infinity Networking course curriculum brings these concepts into the lectures and hands-on exercises, allowing the student to become comfortable utilizing these universal concepts. *Advanced Infinity Networking course prerequisites. Appropriate IT skills and/or experience needed to attend this class are as follows: IP addressing Network layers (OSI model) Routing Switches and hubs LAN and WAN technologies VLAN design Network diagnostic tools and protocols Port management and configuration The following vendor-specific IT Certifications can be presented in lieu of not attending this course: Cisco CCNA Cisco CCNP

11 11 Monitoring & HealthCare IT Attendance and successful completion of the Monitoring and Healthcare IT training courses does not prepare the student for installation or configuration of Dräger s complex systems. The courses are designed to provide basic information for first call troubleshooting and basic repairs. These systems should be installed by an appropriately appointed, technically-trained Dräger representative(s), under the guidelines of approved procedures established by Dräger. INFINITY MODULAR MONITOR SERIES WITH SCIO CEU S: 3.0 (WITHIN 3 YEARS) DSU3620NET $6, Advanced Infinity Networking This seminar is designed to introduce the biomedical professional to the Infinity Delta/Delta XL/Kappa/Gamma XL monitors and the Scio gas module. This seminar includes instruction on the service-related operation, configuration, and NBP calibration/characterization. Upon successful completion of this seminar, the participant will be able to do the following: explain software versions and software download procedures, detail the options concerning each unit, discuss and perform repair and maintenance for each unit, perform practical operational exercises on each unit and complete a Preventive Maintenance Inspection. INFINITY ACUTE CARE SYSTEM CEU S: 3.0 (WITHIN 3 YEARS) 5.0 MQ00250 DSU3711NET $6.068,40 Advanced Infinity Networking This seminar is designed to introduce the biomedical professional to the Infinity Acute Care System (IACS) monitoring solution. The content of the seminar details the following products that make up of the IACS (C500/C700 Medical Cockpit, M540 patient monitor, M500 docking station and P2500 power supply). This seminar includes product overviews, configuration of the system, testing the operation of the system and communications troubleshooting. Upon successful completion of this seminar, the participant will be able to do the following: explain software versions and software download procedures, detail the options concerning each unit, discuss and perform repair and maintenance for each unit, perform practical operational exercises on each unit and complete a Preventive Maintenance Inspection. INFINITY CENTRALSTATION CEU S: 1.8 (WITHIN 3 YEARS) DSU3642NET $3, Advanced Infinity Networking This seminar is designed to introduce the biomedical professional to the service-related operations, configuration and physical layout of the Infinity CentralStation, along with its role within the Infinity network. Upon successful completion of this seminar, the participant will be able to do the following: explain software versions and software download procedures, detail the options concerning each unit, discuss and perform repair and maintenance for each unit, perform practical exercises of operation on each unit and complete a Preventive Maintenance Inspection. INFINITY M300 TELEMETRY CEU S: 1.2 (WITHIN 3 YEARS) DSU3712NET $2, Infinity CentralStation This seminar is intended to introduce the biomedical professional to the Infinity M300 wireless patient monitor and patient-worn telemetry device. This course includes the programming and care of the Infinity M300 and the configuration of the Infinity CentralStation (ICS) as it pertains to the interaction of the M300 monitor. Upon successful completion of this seminar, the participant will be able to do the following: explain software versions and software download procedures, detail the options concerning each unit, discuss and perform repair and maintenance, perform practical operational exercises and complete a Preventive Maintenance Inspection. INFINITY EXPLORER BASIC CEU S: 1.8 (WITHIN 3 YEARS) 3.0 MQ00187 DSU3701NET $3, Advanced Infinity Networking This seminar is intended to introduce the biomedical professional to the service-related operations, configuration and physical layouts of the Infinity C700 for IT workstation, Infinity Explorer software, and Omega solutions (Omega/Omega-S), along with its role in the Infinity Network. Upon successful completion of this seminar, the participant will be able to do the following: explain software versions and download procedures, install and configure software, install Dräger client applications, implement Microsoft Windows updates and hotfixes, execute repair and maintenance procedures, perform practical operational exercises on the unit and complete a Preventive Maintenance Inspection.

12 Seminar Dates (Jan Jun) Dräger Technical Training Seminars are subject to date changes or cancellation for low enrollment, please contact Dräger for confirmation. or Phone: , option 4 ANESTHESIA SEMINAR COURSE CODE DATE LOCATION Apollo DSU3081NET Feb 9 13 Telford, PA Apollo DSU3081NET Mar Telford, PA Apollo DSU3081NET May Telford, PA Apollo DSU3081NET Jun Telford, PA Fabius Family DSU3021NET Jan Telford, PA Fabius Family DSU3021NET Mar 2 5 Telford, PA Fabius Family DSU3021NET Apr Telford, PA Fabius Family DSU3021NET Jun 1 4 Mississauga, ON Fabius MRI DSU3022NET Jan 30 Telford, PA Fabius MRI DSU3022NET Mar 6 Telford, PA Fabius MRI DSU3022NET May 1 Telford, PA Fabius MRI DSU3022NET Jun 5 Mississauga, ON Zeus Infinity Empowered DSU3085NET Apr Mississauga, ON Zeus Infinity Empowered Networking Primus DSU3084NET May 4 8 Mississauga, ON VENTILATION SEMINAR COURSE CODE DATE LOCATION Evita Infinity V500 / Babylog VN500 DSU3212NET Feb 2 6 Telford, PA Evita Infinity V500 / Babylog VN500 DSU3212NET Feb Telford, PA Evita Infinity V500 / Babylog VN500 DSU3212NET Mar Telford, PA Evita Infinity V500 / Babylog VN500 DSU3212NET Apr 27 May 1 Mississauga, ON Evita Infinity V500 / Babylog VN500 DSU3212NET Jun 1 5 Telford, PA Evita 4 / Evita 2 dura / Evita XL DSU3213NET Mar 9 13 Telford, PA Savina DSU3222NET Apr 10 Telford, PA Savina 300 DSU3223NET Apr 7 9 Telford, PA Oxylog 3000 / Oxylog DSU3273NET May 28 Telford, PA Carina DSU3215NET May 27 Telford, PA

13 Seminar Dates (Jan Jun) Dräger Technical Training Seminars are subject to date changes or cancellation for low enrollment, please contact Dräger for confirmation. or Phone: , option 4 OPEN WARMING THERAPY SYSTEMS SEMINAR COURSE CODE DATE LOCATION Babytherm 8004/8010 DSU3550NET May 14 Telford, PA Radiant Warmer and Resuscitaire Birthing Room Warmer DSU3540NET Jun 17 Telford, PA CLOSED WARMING THERAPY SYSTEMS SEMINAR COURSE CODE DATE LOCATION Caleo DSU3560NET May Telford, PA Globe-Trotter GT5400 DSU3496NET Feb Telford, PA Globe-Trotter GT5400 DSU3496NET Jun 9 11 Telford, PA Isolette C2000 & Isolette 8000 DSU3530NET Jun Telford, PA TI500 Globe-Trotter Neonatal Transport System DSU3495NET Jun Telford, PA MONITORING & HEALTHCARE IT SEMINAR COURSE CODE DATE LOCATION Network Fundamentals Theory DSU36043NET Feb 2 3 Telford, PA Network Fundamentals Theory DSU36043NET Mar 2 3 Telford, PA Network Fundamentals Theory DSU36043NET Apr Telford, PA Network Fundamentals Theory DSU36043NET Jun 8 9 Telford, PA Advanced Infinity Networking DSU3604NET Mar 4 6 Telford, PA Advanced Infinity Networking DSU3604NET Apr Telford, PA Advanced Infinity Networking DSU3604NET Jun Telford, PA Infinity Modular Monitor Series with SCIO DSU3620NET Feb 9 13 Telford, PA Infinity Modular Monitor Series with SCIO DSU3620NET Apr Telford, PA Infinity Acute Care System Monitoring DSU3711NET Mar 9 13 Telford, PA Infinity Acute Care System Monitoring DSU3711NET Jun Telford, PA Infinity CentralStation DSU3642NET Mar Telford, PA Infinity CentralStation DSU3642NET Apr Telford, PA Infinity CentralStation DSU3642NET Jun Telford, PA Infinity M300 Telemetry DSU3712NET Mar Telford, PA Infinity M300 Telemetry DSU3712NET Apr 30 May 1 Telford, PA Infinity M300 Telemetry DSU3712NET Jun Telford, PA Infinity Explorer Basic DSU3701NET Feb 4 6 Telford, PA Infinity Explorer Basic DSU3701NET May 4 6 Telford, PA

14 14 Dräger Registration Form must be mailed, faxed or ed to confirm enrollment Page 1 of 2 Fax or completed form to: (215) or DraegerService.Triage@draeger.com Name Employer Address City State Title Phone Fax Zip COURSE SELECTIONS: SELECTION # 1 Course Title Course Date Course Code Course Fee SELECTION # 2 Course Title Course Date Course Code Course Fee SELECTION # 3 Course Title Course Date Course Code Course Fee SELECTION # 4 Course Title Course Date Course Code Course Fee USD USD USD USD Please check here if you have special needs that may affect your participation (a representative will contact you to discuss your request). REGISTRATION Seminar space is limited and students are enrolled on a first-come, first-served basis. You may contact our Triage Center to verify course availability. Please note the duration of each class when selecting your courses as this will determine your length of stay. A letter of confirmation will be sent to the registrant via U.S. Mail, fax or to confirm registration. Read this letter carefully. If corrections are needed, contact our Triage Center immediately. TUITION Your tuition payment covers the cost of all course materials, instruction, lunch and refreshments. Prices are subject to change without notice. All travel, expenses and hotel accommodations, including meals outside of Dräger, are the sole responsibility of each registered participant. Tuition payment MUST be provided at the time of registration. IMPORTANT: CANCELLATIONS Cancellations received, in writing, 15 business days prior to the course will not be billed for the seminar. A fee of 50% of the total tuition will be charged for cancellations less than 15 business days of the scheduled seminar date. Please note that if you do not cancel in writing and do not attend, you are still responsible for payment. Dräger reserves the right to cancel or change the course dates due to low enrollment or other unforeseen circumstances. If Dräger cancels a course, you will be provided with a minimum of 15 business day s notice and the full tuition will be refunded or applied toward any future course. Cancelled students will be placed on a priority list for the next available course. Dräger cannot be held liable for non-refundable travel expenses in the event of a course cancellation. Course instruction will provide the student with confidential and proprietary information of Dräger products. This information shall not be reproduced, distributed, used or disclosed in whole or in part unless otherwise authorized by Dräger in writing.

15 15 Dräger Registration Form must be mailed, faxed or ed to confirm enrollment Page 2 of 2 Fax or completed form to: (215) or DraegerService.Triage@draeger.com METHOD OF PAYMENT: Payment must accompany the registration form in order to process registration. Purchase Order No. Today s Date If included with machine purchase, please list: Purchase Order No. Sales Order No. I am enclosing a check made payable to Draeger Medical in the amt of $ Dräger, is authorized to charge the credit card below for my seminar registration fees in the amount on this form Mastercard Visa Amex Credit Card Acct No. CSC/CID Code Expiration Date Card Holder Signature of Card Holder Card Holder Phone Print Full Name AUTHORIZATION Yes, I accept the Dräger Registration, Tuition, and Cancellation policy. The Participant that registers for and attends the seminar associated with this sales order must be an employee of the purchasing facility and may be required to show proof of employment. Registration is not transferable. Student Signature (REQUIRED) Signature Print Name Student s Supervisor Signature (REQUIRED) Signature Print Name Draeger Medical, Inc. has been accredited as an Authorized Provider by the International Association for Continuing Education and Training (IACET), 1760 Old Meadow Road, Suite 500, McLean, VA 22102; (703) In obtaining this approval, Draeger Medical, Inc. has demonstrated that it complies with the ANSI/IACET Standard which is recognized internationally as a standard of good practice. As a result of their Authorized Provider accreditation status, Draeger Medical, Inc. is authorized to offer IACET CEUs for its programs that qualify under the ANSI/IACET Standard. For Payments and/or inquiries contact PHONE (800) , option 4 FAX (215) WEB draegerservice.triage@draeger.com MAIL Draeger Medical, Inc Quarry Road Telford, PA 18969

16 CORPORATE HEADQUARTERS Drägerwerk AG & Co. KGaA Moislinger Allee Lübeck, Germany Manufacturer: Dräger Medical GmbH Moislinger Allee Lübeck, Germany As of August 2015: Dräger Medical GmbH changes to Drägerwerk AG & Co. KGaA. USA Draeger Medical, Inc Quarry Road Telford, PA , USA Tel Toll-free Fax CANADA Draeger Medical Canada Inc Skymark Avenue, Unit 1 Mississauga, Ontario, L4W 4Y6 Tel Toll-free Fax Canada.support@draeger.com Communications & Sales Marketing PP Printed in USA Environmentally compatible Subject to modifications 2015 Drägerwerk AG & Co. KGaA