RESUME. 1. Name and Surname: Ayhan OZCIFCI 2. Date of Birth: Title: Professor. Dr. 4. Education: Doctorate

Transcription

1 RESUME 1. Name and Surname: Ayhan OZCIFCI 2. Date of Birth: Title: Professor. Dr. 4. Education: Doctorate Degree Area University Year Bachelor Furniture and Decoration Education Gazi University (GU) 1992 Technical Education Faculty MSc. Furniture and Decoration Education G. U. Institute of Science 1995 PhD Furniture and Decoration Education G. U. Institute of Science Academic Titles Position Title Place Task Year Research asist. Gazi University Faculty of Technical Education Lecturer Zonguldak Karaelmas University (ZKU) Safranbolu Vocational School Asist.Prof. Dr. ZKU. Safranbolu Vocational School Asist.Prof. Dr. ZKU. Karabük Technical Education Faculty Assoc. Dr. ZKU. Karabük Technical Education Faculty Assoc. Dr. Karabük University, Technical Education Faculty Prof. Dr. Karabük University, Technical Education Faculty Advisors of MSc and PhD Thesis 6.1. Master Thesis 1. Effects of the Blade Cutting Angle on Surface Roughness in Furniture Production. (Volkan, DURAN ), ZKU. Institute of Science and Technology, Master Thesis, The effects of impregnation solutions exterior varnishes adhesion resistance ( Ahmed Sertan ÖZPAK ), ZKU. Institute of Science, Master Thesis, 2006.

2 3 - Combustion Properties of Impregnated Laminated Wood Materials, ZKU. Institute of Science and Technology ( Oktay Okçu ), Master Thesis, The Effects of Water Repellent Impregnation on Some Surface Operations (Deniz SOYLAMIŞ ), ZKU. Institute of Science and Technology, Master Thesis, Some Resistance Characteristics of Plastic and Wood-Based Composite Materials on Furniture Corner Joints (Mutlu TURK ), ZKU. Institute of Science and Technology, Master Thesis, Determination of Some Strength Properties of Modular Connection Elements for Case Furniture ( Hamza KILIÇALP ), ZKU. Institute of Science and Technology, Master Thesis, Determination the Effects of Impregnation Pressure and Holding Periods of Impregnation Penetration in the Wood Material ( Serdar AYAR ), K.U. Institute of Science and Technology, Master Thesis, Determination of Some Strength Characteristics of Composite Timbers ( Hamdullah SİZÜÇEN ), K.U. Institute of Science and Technology, Master Thesis, Effect of Strend Geometry and Direction oo Some Physical and Mechanical Properties of OSB, K.U. Institute of Science and Technology ( Muhsin KOSE ), Master Thesis, Some Physical and Mechanical Properties of Boron Oil on Wood Materilas, K.Ü. Institute of Science and Technology ( Faruk BATAN ), Master Thesis, The Effect of Weathering Conditions on Some Properties of Wood Materials, K.U. Institute of Science and Technology ( Fortune BİLGEN ), Master Thesis, Determination of Some Mechanical Properties on Heat Treated Laminated Veneer Lumber, K.U. Institute of Science and Technology ( Isa BAŞTUĞ ), Master Thesis, Determination of Adhesion and Combustion Resistance Impregnated with Aqua and Tanalith Immersol-E Wood, K.U. Institute of Science and Technology ( Serdar KAÇAMER), Master Thesis, Doctoral Thesis Gunay Ozbay, Liquefaction of Wood and Wood-Based Composite Material by Thermal and Catalytic Pyrolysis Method. K.Ü. Institute of Science, 2010 Erkan Likos, Analysis of Corner Joints in Chair Section Form K.Ü. Institute of Science, 2010 Hamdi ERGÜL, Future Needing Estimate and Economy Area of Wood Material used in Construction Industry. K.Ü. Institute of Science, 2010.

3 7. Publications 7.1. Refereed Journal Articles Published in International (SCI & SSCI & Arts and Humanities) 1. Örs, Y., Atar, M., Özçifçi, A., Bonding strength of poly(viniyl acetate) based adhesives in some wood materials treated with impregnation. Journal of Applied Polymer Science, 76, (9): , Uysal, B., Özçifçi, A., Effects of dowel produced from various materials on withdrawal strength in MDF and PB. Journal of Applied Polymer Science, 88 (2): , Uysal, B., Özçifçi, A., The effects of impregnation chemicals on combustion properties of laminated wood material, Combustion Science and Technology 176(1): , Uysal, B., Özçifçi, A., Bond strength and durability behavior of polyurethane-based Desmodur-VTKA adhesives used for building materials after being exposed to waterresistance test. Journal of Applied Polymer Science, 100 (5), , Özçifçi, A., Effects of boron compounds on the bonding strength of phenol-formaldehyde and melamine-formaldehyde adhesives to impregnated wood materials. J Adhesion Sci. Technol., 20(10): , Özçifçi, A., Effects of scarf joints on bending strength and modulus of elasticity to laminated veneer lumber (LVL), Building and Environment, 42 (3): , Özçifçi, A., Örs, Y., Uysal, B. Determination of some physical and mechanical properties of laminated veneer lumber impregnated with boron compounds. Journal of Applied Polymer Science, 105 (4): , Özçifçi, A., Toker, H., Baysal, E., Fire properties of laminated veneer lumber treated with some fire retardants. Wood Research, 52(4): 37-46, Özçifçi, A., Okçu O., The influence of the impregnating chemicals on the bonding strength of impregnated wood materials. Journal of Applied Polymer Science, 107(5): , Atar, M., Özçifçi, A., The effects of screw and back panels on the strength of corner joints in case furniture. Materials and Design, 29: , 2008.

4 11. Özçifçi, A., Impacts of impregnation with boron compounds on the bonding strength of wood materials. Construction and Building Materials, 22(4): , Özçifçi, A., Özpak S., Impacts of impregnation solutions on the adhesion strength of outer usage varnish coatings. Construction and Building Materials, 22(4): , Özçifçi, A., Okçu O., Impacts of some chemicals on combustion properties of impregnated laminated veneer lumber (LVL). Journal of Materials Processing Technology, 199(1-3):1-9, Özçifçi, A., Yapıcı, F. Structural performance of the finger-jointed strength of some wood species with different joint configurations. Construction and Building Materials, 22(7): , Özçifçi, A., Yapıcı, F. Effects of machining method and grain orientation on the bonding strength of some wood species. Journal of Materials Processing Technology, 202(4): , Toker, H., Baysal, E., Özçifçi, A., Altınok M., Sönmez A., Yapıcı F., Altun S., An investigation on compression parallel to grain values of wood impregnated with some boron compounds. Wood Research, 53(4): 59-68, Atar, M., Özçifçi, A., Altınok, M., Çelik, Ü., Determination of diagonal compression and tension performances for case furniture corner joints constructed with wood biscuits. Materials and Design, 30 (3): , Yapici, F., Ozcifci, A., Akbulut T., Bayir, R., Determination of modulus of rupture and modulus of elasticity on flakeboard with fuzzy logic classifier. Materials and Design 30, , Özçifçi, A., The effects of pilot hole, screw types and layer thickness on the withdrawal strength of screws in laminated veneer lumber Materials and Design 30, , Toker, H., Baysal, E., Simsek, H., Senel, A., Sönmez A., Altınok M., Özçifçi, A.,Yapıcı F., Effects of some environmentally-friendly fire-retardant boron compounds on modulus of rupture and modulus of elasticity of wood. Wood Research, 54(1): 77-88, 2009.

5 21. Özçifçi, A., Yapıcı F., Altun, S., Toker, H., Baysal, E., Senel, A., Simsek, H., Glossiness, color stability, and surface roughness of wood treated with some bleaching chemicals. Wood Research, 54(2): 83-94, Toker H, Baysal E, Ozcifci A, Simsek H, Altun S, Yapıcı F, Göktaş, O,. Some combustion parameters of wood impregnated with borates, Forest Product Journal, 59(6): 85-89, Kurt, S., Ozcifci, A. Effect of various fire retardants on brinell hardness of some wood. Bioresource, 4(3): , Budakci M., Ozcifci, A., Sonmez A., Cinar H., Effects of application methods and species of wood on color changes of varnishes. African Journal of Biotechnology 8(21): , Ozcifci, A., Effects of outdoor exposures and boron compounds on bonding strength of Desmodur-VTKA adhesive. J Adhesion Sci. Technol., 24(2): , Özçifçi, A., and Özbay, G. "Impacts of bleaching chemicals and outdoor exposure on changes in the color of some varnished woods," BioResources. 5(2): Altun S., Özçifçi, A., Şenel, A., Baysal, E., Toker, H., Effects of Slica Gel on Leaching Resistance and Thermal properties of impregnated wood. Wood Research, 55(4): , Other Refereed Journal Articles Published in the International 7.3. Featured in the Book of International Scientific Conferences and Papers (Proceedings) Printed Papers 1 Özçifçi, A., Ozen, R., I. Kureli, A Study of features about resistance to the corner points of the furniture made by particleboard. Proceeding of the XI World Forestry Congres, p 35, October 1997, Antalya, Turkey.

6 2 Özçifçi A., Ozen, R., Altınok, M., Determine Polimar of the strength of adhesive joints in boiling, cold and hot water conditions of the wooden materials. Proceeding of the XI World Forestry Congres, p 57, October 1997, Antalya, Turkey. 3. Kuerli, I, Ozen, R., Özçifçi, A.. Important features of the mechanical joints used for wooden chairs. Proceeding of the XI World Forestry Congres, p 58, October 1997, Antalya, Turkey. 4. H. Peker, Özçifçi, A., The Effect of conditioning on the exterior surface erosion of the impregnated Scotch pine (Pinus sylvestris L.). Forest Products Society 55th Annual Meeting, June Booth 39 Wyndham Baltimore Inner Harbor Hotel in Baltimore, Maryland 2001, USA. 5. Ors, Y., Özçifçi, A., Uysal, B. The effects of some Impregnation materials on Scotch pine (Pinus sylvestris L.). Gazi University, Technical Education Faculty. 7 th International Symposium of Combustion, July , Ankara, Turkey. 6 Özçifçi, A., Göloğlu, C., Kadi, I.., Higher Education recommendations for pre-vocational and technical education, vocational and technical education, teacher training, the Ministry of Education: Mtoe (Vocational Education Modernization Project) International Conference, January 2004, Ankara, Turkey. 7. Yapici, F, Ozcifci, A., Bayir, R., Prediction of the modulus of elasticity of flakeboard classifier with fuzzy logic. Proceeding of the 6th International symposium on Intelligent and Manufacturing Systems, p , October 11-16, 2008, Sakarya-Turkey. 8 Ozcifci, A., Yapici, F., Altun, S., The Prediction of the effect of grain angle, modulus of rupture and modulus of elasticity values over ten Scots pine with fuzzy logic classifier. 5 th International Advanced Technologies Symposium-IATS 09, May 13-15, pp. 90, Karabuk, Turkey. 9 Ozcifci, A., Altun, S., Yapici, F., Effects of heat treatment on technological properties of wood. 5 th International Advanced Technologies Symposium-IATS 09, May 13-15, pp. 3, Karabuk, Turkey Written International Books and Books Chapters 7.5. Articles published in National Journals

7 1 Özçifçi, A., Altınok, M., Ozen, R., Statistical Analysis and Evaluation of Experimental Results on Corner Joints Strength Properties in Case Furniture. Journal of Scientific Research Foundation, v 1, the Özçifçi, A., Altınok, M., Ozen, R., Theoretical Calculations of Some Strength Properties on Case furniture Corner Joints, Journal of the Scientific Research Foundation, v 1, n 2, Doganay, S., Özçifçi, A., Kureli, I., Chip Plate Used in the Production of Furniture Screw Holding Strength of Edge Effect Massif. Gazi University Journal of Science and Technology Institute, c 1, n 2, pp , Uysal, S., Atar, M., Özçifçi, A., The Effects of Chemical for Using the Bleaching of the Wood Surfaces on the Layer Hardness of Varnish. Turkish Journal of Agriculture and Forestry (TUBITAK), c 23, n 4, p Uysal, S., Atar, M., Özçifçi, A., The Effects of Wood Bleaching Chemicals on the Bending Strength of Wood. Turkish Journal of Agriculture and Forestry (TUBITAK), c 23, n 6, p , Tokgoz, H., Özçifçi, A., Atar, M., Uysal, B., Shear, and Bending Strength of Joints Prepared from Scotch Pine Grained Some End to End. Turkish Journal of Agriculture and Forestry (TUBITAK), c 23, n 6, p , Ors, Y., Atar, M., Özçifçi, A., Different types of wood chip and fiber panels with PVAc or Desmodur-VTKA Kavelalarda Applied Tensile Strength Using Glue. Turkish Journal of Agriculture and Forestry (TUBITAK), c 23, n Supplement 1, pp , Ankara Ors, Y., Özçifçi, A., Atar, M., Klebit 303, 308 Lackleim Kleıberit and Super-Bond adhesive resistors. Turkish Journal of Agriculture and Forestry (TUBITAK), c 23, the Supplement 3, pp , Özçifçi, A., Atar, M., Uysal, B., Wood by Chemicals Used in the trench surface brightness of colors and varnishes Effects of adhesion strength. Turkish Journal of Agriculture and Forestry (TUBITAK), c 23, the Supplement 3, pp , Uysal, B., Sonmez, A., Atar, M., Özçifçi, A., Wood Materials and varnishes Color Changes Color On The Effects of Operations. Turkish Journal of Agriculture and Forestry (TUBITAK), c 23, the Supplement 4, pp , Özçifçi, A., Doganay, S., Sticker-chip Plate (Waferboard) and Beech and Spruce Odunlarının Screw and nail holding resistors. Turkish Journal of Agriculture and Forestry (TUBITAK), c 23, the Supplement 5, pp , 1999.

8 12.Atar, M., Özçifçi, A., Uysal, B., Wood Materials Lightening Effects of Chemical Substances PVAc adhesive adhesion strength. Fırat University Journal of Science and Engineering, c 11, n 1, pp , Örs, Y., Atar, M., Özçifçi, A., The edges of MDF boards Covered and Uncoverd with wood and Dowel Diameters Effects of Tensile Strength. Journal of Engineering Sciences, Pamukkale University Faculty of Engineering, c 5, n 2-3, pp , Örs, Y., Özçifçi, A., Atar, M., PL Tag-chip (WFB) Applied to the edge of the massive thickness of different sizes, and Tensile Strength of Dowel Diameters Effects. G. Ü. Journal of the Institute of Science and Technology, c 13, n 1, pp 15-23, Uysal, B., Özçifçi, A., Color drop-down Beech Wood ( Fagus Orientalis Lipsky ) Combustion Properties of Flame seamless, single Karaelmas University of Zonguldak. Education. Fac. Technology Journal, 3 years n 1, pp , Uysal, B., Özçifçi, A., Peker, H., The Effect of Exterior Conditions On The Erosion Surfaces of the impregnated Chesnut ( Cestanea Sativa Mill. ) Zonguldak Karaelmas University, Tech. Education. Fac. Technology Journal, year 3, n 1, pp , Uysal, B., Özçifçi, A., Uludag fir ( Abies bornmülleriana Mattf.) PVAc glue laminated wood material produced by the combustion properties, Journal of Polytechnic Faculty of Technical Education, Gazi University, c 3, s 1, 23-29, Uysal, B., Özçifçi, A., Atar, M., Varnished chip Label Sheets at (WFB) Effect of Amount of Water mists Weight and swelling. Single Karaelmas University of Zonguldak. Education. Fac. Technology Journal, year 3, n 2-3, pp 81-90, Özçifçi, A., Yıldırım, K., Fiber Frame Systems Alternative View corner joints Resistance Properties of the prepared sheets. Single Karaelmas University of Zonguldak. Education. Fac. Technology Journal, year 3, n 2-3, pp 91-98, Örs, Y., Uysal, B., Özçifçi, A., Atar, M., Tag-chip Plate (WFB) Effect of Amount of varnish Weight and swelling at the Polytechnic Faculty of Technical Education, Gazi University Journal, c 3, s 3, 1-6, Uysal, B., Özçifçi, A., Linden ( Morus alba L. ) produced with PVAc adhesive laminated wood combustion properties of wood, Gazi University Journal of Science and Technology Institute, c 13, n 4, pp , Uysal, B., Özçifçi, A., Color drop-down Beech Wood ( Fagus Orientalis Lipsky ) Burning Characteristics (Fire-Source). Fırat University Journal of Science and Engineering, c 12, n 1, pp , 1999.

9 23.Özen, R., Uysal, B., Özçifçi, A., crashed in different layers of laminated wood materials, Tensile Strength of Dowel Glue Effect of Variety. Journal of Zonguldak Karaelmas University of Technology Faculty of Technical Education, y 3, s 4, 1-9, Örs, Y., Özçifçi, A., Atar, M., Bending Strength of Laminated Wood Materials Convergence Effect of Finger Boy. Gazi University Journal of Science and Technology Institute, c 14, n 2, pp , Özen, R., Özçifçi, A., Uysal, B., Impregnated Scots pine ( Pinus sylvestris L. ) Wood Burning Characteristics of laminated wood produced. Journal of Engineering Sciences, Pamukkale University Faculty of Engineering, 7 (1): , Özen, R., Özçifçi, A., Uysal, B., Glued laminated wood using PVAc Adhesive Burning Characteristics of Building Elements. Journal of Zonguldak Karaelmas University of Technology Faculty of Technical Education, y 4, pp 1-2, , Özçifçi, A., White Lightening Chemical Substances Oak Quercus sessiliflora Salisb ) Effects of Wood Combustion. Journal of Zonguldak Karaelmas University of Technology Faculty of Technical Education, y, 4 (3-4), 63-72, Uysal, B., Özçifçi, A., Yilmaz, S., Combustion properties of different wood materials. Fırat University Journal of Science and Engineering, c 12, n 1, pp , Özçifçi, A., Atar, M., Some Chemical Substances Elm (Ulmus campestris Spach) Effects Wood Tone. Zonguldak Karaelmas University of Technology Journal of the Faculty of Technical Education, y 5, (1-2), 21-28, Ors, Y., Atar, Özçifçi, A., M., H. Peker, Impregnated with various substances Kokarağaç Combustion Properties of Wood. Journal of Zonguldak Karaelmas University of Technology Faculty of Technical Education, y 5, s 3-4, Uysal, B., and A. Özçifçi, "Foreign Lath Type and Dimensions of the Foreign merge fiber tensile strength Vertical Effects", Gazi University, Institute of Science Magazine, 15, 1, Özçifçi, A., "Post-Combustion Properties of Laminated Red Pine Wood Preservative," Karaelmas University of Zonguldak, Karabük Technical Education Faculty Journal of Technology, 7: (1-2), 1-11, Özçifçi, A. Maker, F., Turkey, Furniture Industry Overview. Wood Tech: Wood, Research, Technology, Industrial Design and Furniture Journal. (6), 3-6, Özçifçi, A., Uysal, B., Wolf, S.. Effects on Human Behaviour in Occupational Accidents, Karaelmas University of Zonguldak, Karabük Technical Education Faculty Journal of Technology, 8: (2), , 2005.

10 35 Uysal, B. Özçifçi, A. Wolf, S.. Analysis of Industrial Accidents occurred in the Small and Medium-Sized Furniture Manufacturing Firms in Turkey. Gazi University, Institute of Science Magazine, 18 (3): , Uysal, B. Özçifçi, A. Kurt, Ş. Constructive F. Effect of laminated materials, the water mists Dimensional Change. Fırat University Journal of Science and Engineering 17 (4) : , Atar M. Özçifçi, A. On the Bonding Strength of Laminated Wood Materials Produced from European Beech (Fagus sylvatica) and Scots Pine (Pinus sylvestris Lipsky), glued with Polyvinyl Acetate (PVAc)-D4 Adhesive. Karaelmas University of Zonguldak, Karabük Technical Education Faculty Technology Journal, 8: (4): , Özçifçi A., Kılıçalp, H., Toker, H., Box furniture Resistance Characteristics of Some Elements of Modular Connection, Technology, 11 (1) :45-57, Falcon Arm, H., Özçifçi, A. Altun, S., Urea Formaldehyde and Phenol Formaldehyde Wood Glue laminated materials produced with the Articles of the Effects of Impregnation on the Thermal Conductivity Coefficient, "Journal of Forestry, Kastamonu University," 8 (2): , Altınok M, Özçifçi. A. Taylor H. Hussein. Determination of the corner joint performance on the melamine-faced fibreboard (MDF-LAM) construction. Technology, 12 (2) :87-92, Constructive, F., Day, G., Özçifçi, A., Likos, E., Prediction of the Screw and Nail Withdrawal Strength on OSB (Oriented Strand Board) Panels Fuzzy Classifier With Volume, Technology, 12 (3) : , Özçifçi, A. Uysal, B. Kurt, Ş. Ozbay, G. Impact of various fire retardants on the red color and yellow color tone of some woods and varnishes. Technology, 12 (4) : , Özçifçi, A. sinking F. Effect of Boron on Mechanical Properties of Some Oil Wood. Polytechnic, 12 (4): , Constructive F, Özçifçi, A., Ozbay G., Compression and Bonding Strength of Heat Treated Scotch Pine (Pinus Slyvestrist l.) with the D-VTKA Adhesive Bonded Wood. E- Journal of the New World Academy of Sciences. 5 (2) : , Özçifçi, A. Uysal, B. Sizüçen, H. constructive, F. Altun, S., Kurt, Ş. Ozbay, G. A Study on Some Mechanical Properties of Structural Composite Comperative lumbers (SCL) Produced from Poplar (Populus tremula L.) Papels. Technology, 13 (2) :85-89, Constructive F, Gunduz, G., Özçifçi, A., The Effects of Some Factors on Thermal conductivity of Oriented Strand Board Production. Technology, 13 (2) :65-70, 2010.

11 47 Özçifçi, A. sinking F. Effect of Some Physical Properties of Boron Oil Wood. Kastamonu University, Faculty of Forestry Journal, 10 (2) : , Featured National Scientific Conferences and Papers printed in the Book of Proceedings 1 Professor. Dr. Ors Yalcin, Assoc. Dr. Ayhan Özçifçi, Asst. Dr. Hamish Falcon Arm, RA. Robert Maker, "Surface Processes in Eastern spruce (Picea orientalis L.) Wood Color, Brightness, and Effect of Hardness Values" I. Karadeniz Technical University, Faculty of Forestry Spruce Symposium, Trabzon, Oktay Bowman, Ercument Neset Dizdar, Ayhan Özçifçi, students of secondary education as appropriate and tables on the design of an anthropometric study. Erciyes University Department of Industrial Engineering, XIII National Congress of Ergonomics, pp 9-16, 6-8 December, Kayseri, Other Publications 8. Projects 1 Parameters of Solar Direct Drying Lumber Drying Furnace Control. ZKU Scientific Research Project. Project number: Project start date: 28/06/2000 Project end date: 28/06/2002 Project budget: 4873 YTL 2. Wooden Houses of Safranbolu Date of Construction Elements to be taken to eliminate these factors cause which Factors and Determination of measures. ZKU. Scientific Research Project. Project number: Project start date: 01/08/2003 Project end date: 01/08/2007 Project budget: YTL 3. Transactions on Applied Materials Wood Preservative Effect of Surface Dying Derived Substances. ZKU Scientific Research Project Project start date: 04/10/2004 Project end date: 04/10/2006 Project budget: YTL 4. Effect of Mechanical Properties of Boron Compounds Laminated Wood. SPO. Research Project. Project number: 2003 K

12 Project start date: 01/01/2005 Project end date: 01/01/2008 Project budget: YTL. 5 Biomass Pyrolysis with Catalytic and Thermal Liquid Fuel Production. TUBITAK Project. Project No: 109M745. Project start date: 01/03/2010, Researcher. 9. Administrative Tasks ZKU Department of Technical Education, Furniture and Decoration Education Department of Technical Education Faculty, Karabük University, Furniture and Decoration Education 2007-Continued 10. Memberships 11. Awards 1. Scientific and Technical Research Council of Turkey (TUBITAK) Encouragement Award for International Scientific Publications, Scientific and Technical Research Council of Turkey (TUBITAK) Encouragement Award for International Scientific Publications, Scientific and Technical Research Council of Turkey (TUBITAK) Encouragement Award for International Scientific Publications, Scientific and Technical Research Council of Turkey (TUBITAK) Encouragement Award for International Scientific Publications, Scientific and Technical Research Council of Turkey (TUBITAK) Encouragement Award for International Scientific Publications, Scientific and Technical Research Council of Turkey (TUBITAK) Encouragement Award for International Scientific Publications, Scientific and Technical Research Council of Turkey (TUBITAK) Encouragement Award for International Scientific Publications, Scientific and Technical Research Council of Turkey (TUBITAK) Encouragement Award for International Scientific Publications, 2008.

13 9. Scientific and Technical Research Council of Turkey (TUBITAK) Encouragement Award for International Scientific Publications, Scientific and Technical Research Council of Turkey (TUBITAK) Encouragement Award for International Scientific Publications, Scientific and Technical Research Council of Turkey (TUBITAK) Encouragement Award for International Scientific Publications, Scientific and Technical Research Council of Turkey (TUBITAK) Encouragement Award for International Scientific Publications, Scientific and Technical Research Council of Turkey (TUBITAK) Encouragement Award for International Scientific Publications, Scientific and Technical Research Council of Turkey (TUBITAK) Encouragement Award for International Scientific Publications, Scientific and Technical Research Council of Turkey (TUBITAK) Encouragement Award for International Scientific Publications, 2010.

14 12. Given the last two year and Graduate Level Courses Academic Year Semester Course Title Weekly Time Teo...Lab Number of Students MOD 206 Woodworking Machinery MOD 405 I Perspective MOD 707Adhesives FALL MOD 711 Wood Phys Mech MOD s Speciality MOD s THESIS MOD 809 Des Mob End Comp Design MOD 898 Special MOD 899 THESIS MOD102Basic Design Furniture MOD102Basic Furniture Design II.öğ MOD 406 Perspective II MOD 706 Mass Production The Technology first MOD 804 special drying methods Spring MOD s Speciality MOD s THESIS MOD 898 Special MOD 899 THESIS MOD 101 Technical Drawing I Inst MOD 405 Perspective I MOD 707Adhesives FALL MOD 711 Wood Phys Mech MOD s Speciality MOD s THESIS MOD 898 Special MOD 899 THESIS MOD102Basic Design Furniture MOD 206 Woodworking Machinery MOD 406Perspective II MOD 706 Mass Production The first Spring Technology MOD 804 special drying methods MOD s Speciality MOD s THESIS MOD 898 Special MOD 899 THESIS 0 1 5