Ongoing R&D projects in COST member countries
|
|
|
- Vincent Young
- 7 years ago
- Views:
Transcription
1 Ongoing R&D projects in COST member countries Christian Brischke and Holger Militz
2 University Hamburg, Center for Wood Science, Hamburg Georg August University Göttingen, Wood Biology & Wood Products, Wood Chemistry & Wood Composites, Mol. Wood Biotechnology, Göttingen Leibniz University Hannover, Faculty of Architecture & Landscape Sciences, Hannover Technical University Dresden, Institute of Steel and Timber Construction, Dresden Technical University Dresden, Institute of Wood and Paper Technology, Dresden Friedrich Schiller University of Jena, Institute of Microbiology, Jena
3 Technical University Munich, Holzforschung München, Munich University Stuttgart, Chair for Building Physics, Stuttgart Albert Ludwigs University Freiburg, Faculty of Environment and Natural Resources, Freiburg Ernst Moritz Arndt Universität Greifswald, Institute for Microbiology, Greifswald
4 Eberswalde University for Sustainable Development, Faculty of Wood Science and Technology, Eberswalde University of Applied Sciences Ostwestfalen Lippe Fachbereich Produktion und Wirtschaft, Lemgo University of Applied Sciences Rosenheim, Wood Technology, Rosenheim University of Applied Sciences Aachen, Faculty Civil Engineering, Aachen University of Applied Sciences and Arts, Faculty of Architecture, Engineering and Conservation, Hildesheim
5 Fraunhofer Institute for Building Physics, Holzkirchen Fraunhofer Wilhelm Klauditz Institute, Brunswick Julius Kühn Institute (JKI), Federal Research Centre for Cultivated Plants, Brunswick Thünen Institute of Wood Research, Hamburg Federal Institute for Materials Research and Testing (BAM), Berlin MPA Eberswalde Material Testing Institute Brandenburg GmbH, Eberswalde Fibre Institute (Faserinstitut Bremen e. V.), Bremen Institute for Wood Technology Dresden (IHD), Dresden
6 Georg August University Göttingen, Wood Biology & Wood Products Wood modification & Plasma treatment New impregnation technology for wood (high frequency, adaped pressure technology, bio incising) Improvement of wood product properties by increased hydrophobicity obtained by waxes and silicon compounds Wood decay in buildings Innovative wood composites (LVL, WPC, etc.) Wood adhesives
7 Leibniz University Hannover, Faculty of Architecture & Landscape Sciences Service life prediction of exposed wooden components based on dose response functions Monitoring of timber structures Quality control and assurance of thermally modified timber (TMT) Moisture based durability assessment of wood based products PerformWOOD Performance standards for wood in construction delivering customer service life needs Thermal modification of reed
8 Technical University Dresden, Institute of Steel and Timber Construction Development of highly reliable composite wood structures strenghtened with fiber reinforced plastics and technical textiles Wood densification and thermo hydro mechanical modification Wood moulding and lightweight structures Technical University Dresden, Institute of Wood and Paper Technology Wood modification, wood moulding Enzymatic modification of fibrous material Thermal modification of bamboo and wood
9 Institute for Wood Technology Dresden (IHD) Research in biocide free timber preservation Thermal modification of wood and wood based panels Development of coatings with enhanced antimicrobial effectiveness Composite panels with alternative cores Improvement and testing of wood plastic composites (WPC)
10 University Hamburg, Center for Wood Science / Thünen Institute of Wood Research Determination of biological, chemical and physical parameters of wood species Wood and climate (e. g. Environmental product declaration, WECOBIS, Emissions from Wood and wood based products [VOC]) Development and standardization of test methods in wood preservation Investigations concerning the performance of wax treated timber in UC 3
![Environmental product declaration, WECOBIS, Emissions from Wood and wood based products [VOC])](/docs-images/46/21585200/images/page_10.jpg "Development and standardization of test methods in wood preservation Investigations concerning the")
11 Eberswalde University for Sustainable Development, Faculty of Wood Science and Technology Simultaneous shaping and fixation of veneer by specific material modification Quality assurance and process development of thermally modified timber Emissions from TMT products Sound absorbers for acoustic panels made of wood particles Sustainable polymerbased composites / Wood Plastic Composites from Saw Dust (WPC SD)
12 Ernst Moritz Arndt Universität Greifswald, Institute for Microbiology, Greifswald Microbial degradation of thatched roofs Julius Kühn Institut (JKI), Federal Research Centre for Cultivated Plants Development of quality control measures for reed Deterioration of reed thatching material
13 Specialist equipment Chemical modification pilot plants / Impregnation pilot plants University Göttingen, Thünen Institute Hamburg, Institute for Wood Technology Dresden (IHD) Heat treatment facilities University Göttingen, University Hannover, HNEE Eberswalde, Institute for Wood Technology Dresden (IHD)
14 Actvities/Facilities Properties Environmental Environmental Product Declaration (EPD) Emission testing Product accreditation Whole Life evaluations Life Cycle Assessments Dimensional stability Insect /termites / pests Fire resistance / reaction to fire Resistance to mould Moisture / sorption studies Natural Durability INSTITUTE
15 Activities/Facilities Properties Environmental Environmental Product Declaration (EPD) Emission testing Product accreditation Whole Life evaluations Life Cycle Assessments Dimensional stability Insect /termites / pests Fire resistance / reaction to fire Resistance to mould Moisture / sorption studies Natural Durability INSTITUTE
16 Actvities/Facilities Laboratory tests Field tests Moisture data logging Surface performance / coatings Natural weathering Out of ground contact tests In ground contact tests Dimensional stability Sorption studies Leaching / weathering Insect /termite testing Mould resistance Natural Durability INSTITUTE
17 Actvities/Facilities Laboratory tests Field tests Moisture data logging Surface performance / coatings Natural weathering Out of ground contact tests In ground contact tests Dimensional stability Sorption studies Leaching / weathering Insect /termite testing Mould resistance Natural Durability INSTITUTE
Ongoing R&D projects in COST member countries
Ongoing R&D projects in COST member countries France Institute Acronym Research Groups Ecole Supérieure du Bois, Nantes École Nationale Supérieure des Technologies et Industries du Bois, Epinal Laboratoire
Designed for comfort and built to last.
Designed for comfort and built to last. Inter IKEA Systems B.V. 2015 Whether we work in an office or at home, many of us spend the majority of the day at a desk. A comfortable workspace is therefore essential
We care about. Environmentally-Friendly Building Products from Renewable Resources. natural building products. Product range overview
http://upload.wikimedia.org/wikipedia/commons/a/ae/flag_of_the_united_kingdom.svg.0.0 :8 Seite von Environmentally-Friendly Building Products from Renewable Resources Product range overview We care about
The Johann Heinrich von Thünen Institute research in the fields of Rural Areas, Forestry, and Fischeries
Institut für The Johann Heinrich von Thünen Institute research in the fields of Rural Areas, Forestry, and Fischeries Walter Seidling (Eberswalde) and Stefan Lange (Braunschweig) E-URAL workshop on Nature
100% 50% 92% 99% LEED Facts PROJECT HIGHLIGHTS. Multi-occupant spaces have adjustable thermostats and lighting. Reduced water usage for landscaping
UNIVERSITY OF RICHMOND CAROLE WEINSTEIN INTERNATIONAL CENTER 28 Westhampton Way, Richmond VA 23173 LEED NC v2.2 GOLD 2015 Completed in 2010, the Carole Weinstein International Center showcases the University
Ranking - German Institutions: Overall Patent Applications
Ranking - German Institutions: Overall Patent Applications 1 Fraunhofer Society 21.632 16 Heidelberg University 598 2 Max-Planck Society 6.173 17 Ludwig Maximilian University of Munich 536 3 German Aerospace
Motivation by tradition. Stepping stones on our way. ``Founded in 1938 as a painting firm. ``Total destruction in World War II. ``1946: 20 employees
Motivation by tradition Stepping stones on our way ``Founded in 1938 as a painting firm ``Total destruction in World War II ``1946: 20 employees ``1955: over 100 employees ``Starting the scaffolding business
Properties of thermally modified wood
Properties of thermally modified wood All the properties described are based on the results of a range of tests, conducted over a period of several years by VTT, the Helsinki University of Technology and
MRK/ 1-12-2011 Page 1(9) 2 Description and assessment of the Production process. 3 Description and assessment of the Surface Treatment Methods
Page 1(9) Plus+ 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface Treatment Methods 4
Conference "Energy Efficiency - Carbon Neutral Building" on 11/06/2013 in London. Technical Technamation Europe GmbH
Conference "Energy Efficiency - Carbon Neutral Building" on 11/06/2013 in London Technical Technamation Europe GmbH Subject: use of coated papers for the ecological House buiding, fittings and furniture
Tried, Tested and Proven Timber Protection
November 05 A Choice of Treatments SPECIFIER S GUIDE Tried, Tested and Proven Timber Protection Preservative and fire retardant industrial treatments to help make the most of timber. Tried, Tested and
Growing Pains. The Truth About Timber and Its Alternatives www.innowood.com
Growing Pains The Truth About Timber and Its Alternatives www.innowood.com Introduction The phrase they don t build houses like they used to is inherently true, and there is good reason for this. Older
FRAUNHOFER UMSICHT. Kick-Off-Meeting ECLIPSE, May 10 th -11 th 2012, San Sebastian. Fraunhofer UMSICHT
FRAUNHOFER UMSICHT Kick-Off-Meeting ECLIPSE, May 10 th -11 th 2012, San Sebastian Fraunhofer Society Research and Development Leading Organization for applied research in Europe Inventions Ranks 14 among
Technology For Adaptation. Forestry Conservation Management. Dr. Javier Aliaga Lordemann
Technology For Adaptation. Forestry Conservation Management Dr. Javier Aliaga Lordemann Forests has more carbon store than the currently carbon free atmosphere. By contrast, are important sources of emissions
BETONYP building boards. The modern way of living.
BETONYP building boards The modern way of living. Tough for 30 years. Healthy, debarked pine wood and cement: the raw materials used to produce one of our most successful products for more than three decades.
HEALTHY LIVING WITH WOOD FIBRE INSULATING MATERIALS
HEALTHY LIVING WITH WOOD FIBRE INSULATING MATERIALS HIGH-QUALITY INSULATION. SUSTAINABLE LIVING. www.homatherm.com Preamble THE EXAMPLE OF NATURE Sustainable living to us means harnessing the forces of
X X X X X X X X X X X X X X X X X X X X X X X X X. OSU College of Forestry WSE Renewable Materials Program Competencies. Eductional Outcomes (PEO)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 (1) Prepare students to be both environmentally conscious and economically successful by using renewable materials (RM) to meet society s needs and solve important problems.
Building Owners Guide to a Duro-Last System!
Building Owners Guide to a Duro-Last System Table of Contents Section 1: Introduction to Duro-Last Roofing Systems Section 2: Benefits of a Duro-Last Roofing System Section 3: Comparing a Duro-Last Roof
A STUDY OF TERMITES DESTROYING STRUCTURAL WOOD IN HYDERABAD URBAN SYSTEM
A STUDY OF TERMITES DESTROYING STRUCTURAL WOOD IN HYDERABAD URBAN SYSTEM Dr.S.Venkata Rama Raju, M.Sc;M.Ed; M.Phill;Ph.D(in Zoology) H.No. 15-142/1/G7,Sahithi Nest Apartment,P&T colony,dilsukhnagar, Hyderabad
03/05/14 REVISOR RSI/JC RD3945
1.1 Department of Commerce 1.2 Proposed Permanent Rules Relating to Commerce; Thermal Insulation Standards; 1.3 Materials and Installation 1.4 7640.0100 AUTHORITY; PURPOSE; INCORPORATIONS BY REFERENCE.
PRODUCT - SPECIFIC REQUIREMENTS (PSR) Wood particleboards PSR 2003:8. The Swedish Environmental management Council Version 1.
EPD R PRODUCT - SPECIFIC REQUIREMENTS (PSR) for preparing an environmental product declaration (EPD) for Product Group Wood particleboards PSR 2003:8 The Swedish Environmental management Council Version
Mold Preventing I nterior System
interior insulation and renovation boards A system of components that have been designed to work perfectly together to repair damage caused by mold. The system consists of boards, insulation wedges, reveal
Mineral fibreglass insulation
Isover MULTIMAX 30 Specification code: MW - EN 13162 - T5 - MU1 - WS - WL(P) - AF r 5 TeChNICaL SPeCIFICaTION Insulating slabs made of Isover fibreglass wool. The production method is based on the fibering
How To Compare Roofing Material
Roofing Material Comparisons Housing Fact Sheets One of the great strengths of our market economy is the number of product choices we are provided with. So when it comes time to replace the roof on your
Bio-materials for building envelope - expected performance, life cycle costing & controlled degradation. Anna Sandak PhD CNR-IVALSA
Bio-materials for building envelope - expected performance, life cycle costing & controlled degradation Anna Sandak PhD CNR-IVALSA Architect Michael Green of Vancouver says: The Earth grows our food.
Institut für Baubiologie + Oekologie
Institut für Baubiologie + Oekologie Neubeuern IBN Institute of Building Biology + Ecology Neubeuern IBN The Institute The Institute The Institute of Building Biology + Ecology Neubeuern IBN was founded
Degrees Offered with Enrollment and Degrees Awarded - 2012-13 All plans, programs, and degrees 2012-13
Offered with and - 2012-13 All plans, programs, and degrees 2012-13 2012-13 AAS Agribusiness Management Associate of Applied Science 20 166 64 AAS Field Crops Technology Associate of Applied Science 9
OIL HEAT TREATMENT OF WOOD
OIL HEAT TREATMENT OF WOOD Sidorova, K. 1 ABSTRACT The investigation of thermal treatment of wood has led to the improvement of heat treatment with vegetable oils. The aim of this work has been to study
Specifying Treated Wood Paul I Morris, Group Leader Durability and Protection
www.fpinnovations.ca Specifying Treated Wood Paul I Morris, Group Leader Durability and Protection Presentation Outline Treated wood in the 2010 NBCC and other uses Overview of CSA O80 Series: Wood Preservation
CERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011
CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS
Restructuring the Federal Governmental Research in Agriculture and Food in Germany
Restructuring the Federal Governmental Research in Agriculture and Food in Germany Foulum,, 19. September 2008 Dr. Christian Patermann Former Director Biotechnologies, Agriculture and Food DG Research,
G VYCOR DECK PROTECTOR. For longer lasting decks, install Grace Vycor Deck Protector. It s an easy add-on to your deck projects.
For longer lasting decks, install Grace Vycor Deck Protector. It s an easy add-on to your deck projects. G VYCOR DECK PROTECTOR Self-Adhered Flashing NEW FROM THE MAKERS OF G Ice & Water Shield I Moisture
INNOVATIONS. Economic Flat Roof Refurbishment with NOVOPROOF Sealing Systems. A Company of the SAARGUMMI Group
INNOVATIONS Economic Flat Roof Refurbishment with NOVOPROOF Sealing Systems A Company of the SAARGUMMI Group OUR SOLUTION TO REFURBISH ROOFS FOR LONG-TERM DURABILITY Quality and Experience from the Innovation
Knauf Aquapanel Interior. Tile Backing. Cement board for wet areas. Will not deteriorate in water. Easy to score and snap
Tile Backing Will not deteriorate in water Easy to score and snap Resistant to mould and mildew Knauf Aquapanel Interior Cement board for wet areas Knauf Aquapanel Interior Cement Board Drywall for Wet
ROXUL Board Insulation Section 07 21 13 Master Guide Specification (CAVITYROCK ) Page 1 April 2016
Master Guide Specification (CAVITYROCK ) Page 1 Click on the pilcrow in the MS Word Toolbar to toggle ROXUL GUIDE NOTES on and off. Delete this text before incorporating the section into a Project Manual.
CHARACTERIZATION OF HIGH PRESSURE RTM PROCESSES FOR MANUFACTURING OF HIGH PERFORMANCE COMPOSITES
CHARACTERIZATION OF HIGH PRESSURE RTM PROCESSES FOR MANUFACTURING OF HIGH PERFORMANCE COMPOSITES R. Chaudhari 1*, M. Karcher 1, P. Elsner 1, F. Henning 1 1 Fraunhofer Institute for Chemical Technology,
Adhesive bonding technology. Manufacturing technology. From the first idea to the final practical solution
Adhesive bonding technology Manufacturing technology From the first idea to the final practical solution Content Customized rather than standard solutions 1 The aim is an optimum production process 3 Proposals
European technical approval
Authorised and notified according to Article 10 of the Council Directive 89/ 106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of Member States relating
Form 0.5 chair, 2805 and 2806
Page 1(8) Form 0.5 chair, 2805 and 2806 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface
Applications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT)
I Applications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT) Table of Content 1 Introduction...1 2 Improved Properties...1 3 Potential Applications...1 3.1 Current / short-term applications...3
Compendium to the National Technology Benchmarks - NTB 2010 TECHNICIAN
Compendium to the National Technology Benchmarks - NTB 2010 TECHNICIAN Reg d trademark of Canadian Council of Technicians and Technologists GENERAL PROGRAM CRITERIA FOR ALL DISCIPLINES Technician Level
Frost Damage of Masonry Walls A hygrothermal Analysis by Computer Simulations
Frost Damage of Masonry Walls A hygrothermal Analysis by Computer Simulations K. SEDLBAUER, H.M. KÜNZEL INTRODUCTION AND OBJECTIVES Frost damage occurs especially if damp building elements are subjected
Cannon T4 Modular Data Centres. For Outside Deployment & Challenging Environments
Cannon T4 Modular Data Centres For Outside Deployment & Challenging Environments A high performance, full specification Data Centre, up to Tier 4* resilience, instantly deployable A highly secure Data
ETAG 011 LIGHT COMPOSITE WOOD-BASED BEAMS AND COLUMNS
European Organisation for Technical Approvals Europäische Organisation für Technische Zulassungen Organisation Européenne pour l Agrément Technique ETAG 011 Edition January 2002 GUIDELINE FOR EUROPEAN
PAAM COMMERCIAL PRIVATE LIMITED
METAL PACKAGING We at Paam Group have been providing vast range of packaging products to our customers based on their preferences, needs and specifications. We provide all the materials required in metal
Large diameter timber - problem or chance?
L I G N O V I S I O N E N Schriftenreihe des Institutes für Holzforschung (ihf) am Department für Materialswissenschaften und Prozesstechnik (MAP) an der Band 13 Book series of the Institute of Wood Science
Exterior Elevated Elements Inspection Guidelines
Exterior Elevated Elements Inspection Guidelines Planning and Development 1. Guideline Purpose These guidelines are intended to assist practicing professionals in complying with Berkeley Municipal Code
Use Preservative-treated Wood & Integrated Pest Management When Rebuilding
Southern Regional Extension Forestry A Regional Peer Reviewed Publication SREF-WP-001 May, 2006 Use Preservative-treated Wood & Integrated Pest Management When Rebuilding Todd Shupe, Associate Professor,
Graduate Education @ Tsinghua GAO Hong, Ph.D.
Graduate Education @ Tsinghua GAO Hong, Ph.D. Associate Dean, Graduate School, Tsinghua University A Comprehensive & Research intensive University 16 schools 56 departments Engineering Sciences Humanities
Microwave absorbing tiles:
On the basis of the results obtained from the first project activities, the grinding conditions on a larger scale were determined. As regards the sintering, an adjustment has been made to the roller furnaces
CLT - healthy, solid and cost-efficient
CLT - healthy, solid and cost-efficient Jørgen Tycho Massiv Lust AS jorgen@massivlust.no Mekanisk industri Massiv Lust AS Flystripe Dypvannskai 4 departments Architectural design Production CNC-Formatting
Composite Design Fundamentals. David Richardson
Composite Design Fundamentals David Richardson Contents A review of the fundamental characteristics of composites Stiffness and Strength Anisotropic Role of fibre, matrix and interface Composite failure
YEAR TRANSFERRABLE TANALISED 25 YEAR TERMITE RESISTANT* STRUCTURAL TIMBER AND WOOD PRODUCTS GUARANTEE
TRANSFERRABLE TANALISED 25 TERMITE RESISTANT* STRUCTURAL TIMBER AND WOOD PRODUCTS GUARANTEE Thank you for selecting Tanalised termite resistant* structural timber and wood products for your new home or
AND MEMBRANES ROOFING UNDERLAYS. www.fakro.com
AND MEMBRANES 010 ROOFING UNDERLAYS 1 HO DOES YOUR ROOF BREATHe? MEMBRANES THE WAY to A WARM AND DRY ROOF HO HO HO HO HO HO WATERTIGHTNESS The FAKRO Company offers a wide range of membranes and underlays
POLYURETHANE FOAM CONCEPT
POLYURETHANE FOAM CONCEPT Scandinavian Product Range (Now with Nordic Product Labels) In General Selena FM has become the second largest polyurethane manufacturer in the world in under 30 years of operations
German International Student Barometer, D ISB, Academic Year 2011/12 Executive Summary
German International Student Barometer, D ISB, Academic Year 2011/12 Executive Summary Background The German International Student Barometer (D ISB) ran from 24 October to 9 December 2011, at 52 Hochschulen
ENVIRONMENTAL EFFECTS ON COATINGS
ENVIRONMENTAL EFFECTS ON COATINGS Surfaces exposed to the environment, may be damaged by elements such as water, snow, ice, heat, dirt, smog, humidity, brake dust, grime, salts, chemical attack, and acid
CONTROLLER OF EXAMINATIONS
B.Arch. and B.Arch.(Interior Design) Marine /B.Tech(Co mmon to all branches) (Incorporating the First and Second Rescheduling and Changes and Additions - I,, I and IV) For candidates admitted in Anna University
MECS CATALYST PRODUCTS & TECHNICAL SERVICES UPDATE. Presented By: Chris D. Winkler MECS, Inc. St. Louis, Missouri, U.S.A.
MECS CATALYST PRODUCTS & TECHNICAL SERVICES UPDATE Presented By: Chris D. Winkler MECS, Inc. St. Louis, Missouri, U.S.A. 2 opics Brief History Standard Catalyst Composition MECS Standard Catalyst Products
Analysis II Façade Redesign: Architectural Precast Panels
Analysis II Façade Redesign: Architectural Precast Panels Analysis II Façade Redesign: Architectural Precast Panels Overview: This analysis covers the comparison of the current EIFS façade and my proposed
AdMaS centre Structure of the centre: Development of Advanced Building Materials Development of Advanced Structures and Technologies
AdMaS centre (Advanced Materials, Structures and Technologies) is modern science centre and complex civil engineering research institution affiliated to the Faculty of Civil Engineering, Brno University
Composite Panel Firewall Systems
Composite Panel Firewall Systems part of the Protecting more than your business Insulated mineral fibre panels have excellent thermal and acoustic properties, ideal for factory and office partition walls.
Building Restoration
Ar. Pallavi Sharma Research Scholar, Amity School of Architecture and Planning, Amity University, Haryana, India ABSTRACT Building restoration describes the process of the renewal and refurbishment of
B. Related categories: The following categories contain requirements that relate to this section:
ORIENTED STRAND BOARD PART I. - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply
Industry. Rail Leading Innovation in a Dynamic Industry. Sika Services AG
Rail Leading Innovation in a Dynamic Industry 1 Content 4 3 1 Direct Glazing_3 Interior Bonding_7 Exterior Component Bonding and Sealing_5 Interior Sealing and Fire Resistance Application_9 2 Floor Bonding_11
KIBO. Twin-Wall Panels: The Problem Solvers
KIBO Twin-Wall Panels: The Problem Solvers The experts at KIBO Kunststoffe GmbH know high-impact polypropylene twin-wall panels and the extrusion processes used to make them inside and out. KIBO twin-wall
VISCOSE FIBRES WITH NEW FUNCTIONAL QUALITIES
VISCOSE FIBRES WITH NEW FUNCTIONAL QUALITIES Walter Roggenstein Kelheim Fibres GmbH, Regensburger Str. 109, 93309 Kelheim, Germany Phone: (+49) 9441 99-489; Fax: (+49) 9441 99-1489; Email: walter.roggenstein@kelheim-fibres.com
CHAPTER 6 ASPHALT ROLL ROOFING
CHAPTER 6 ASPHALT ROLL ROOFING Section I. DESCRIPTION AND GENERAL DISCUSSION 6.1.1 General 6.1.3 Mineral-Surfaced Asphalt roll roofing is roofing in sheet form Mineral-surfaced roll roofing is composed
THE MINISTRY OF ENVIRONMENTAL PROTECTION, PHYSICAL PLANNING AND CONSTRUCTION
THE MINISTRY OF ENVIRONMENTAL PROTECTION, PHYSICAL PLANNING AND CONSTRUCTION 1389 Pursuant to Article 104 paragraph 1 item 4 of the Waste Act (Official Gazette 178/04, 111/06), the Minister of Environmental
BEST PRACTICE GUIDE. Fibrelime Premixed Universal Plaster and Render
BEST PRACTICE GUIDE Fibrelime Premixed Universal Plaster and Render Contents: Fibrelime description Fibrelime suitability Preparation before application Application Aftercare Painting General Recommended
Sustainability assessment of windows and curtain walls
Sustainability assessment of windows and curtain walls January 2015 Authors: Dr. Ing. Peter Mösle Dipl. -Ing. MSc. Eng. Roberto Oshiro Gama Dipl. -Ing. Thomas Haun Dipl. -Ing. Joachim Fauth Drees & Sommer
Insulated Roof & Wall Panels. Product Data Sheet. Trapezoidal Insulated Roof Panels KS1000 RW
Insulated Roof & Wall Panels Trapezoidal Insulated Roof Panels KS1000 RW Overview Kingspan roof panel systems present a superior system compared to conventional multi-part site assembled systems. They
CPO Science and the NGSS
CPO Science and the NGSS It is no coincidence that the performance expectations in the Next Generation Science Standards (NGSS) are all action-based. The NGSS champion the idea that science content cannot
Genett Group, Inc. Genett Group, Inc. Anti Microbial Technology. Hospitality Schools Hospitals Construction Remediator Assessor
Genett Group, Inc. 1515 FEDERAL HIGHWAY BOCA RATON, FL 33432 561 392 6176 Genettgroup.com Hospitality Schools Hospitals Construction Remediator Assessor Anti Microbial Technology Clean Room Antiseptic
Graduate Schools, Doctoral Programmes and Research Training Groups at TU9 Universities
The alliance of the leading Institutes of in Germany RWTH Aachen TU Berlin TU Braunschweig Leibniz Universität Hannover Graduate Schools, Doctoral Programmes and Research Training Groups at TU9 Universities
ROCK WOOL Preformed Pipe Section
ROCK WOOL Preformed Pipe Section Rockwool preformed Pipe section conforming ASTM C 547 and equivalent BS39584 is intended for the thermoacoustic insulation and fire protection of pipe works operating at
SECTION 08 41 1 ALUMINUM FRAMED ENTRANCES and STOREFRONTS. System 402 Flush-Glazed Screw Spline Storefront
PART 1 GENERAL 1.01 Work Included SECTION 08 41 1 ALUMINUM FRAMED ENTRANCES and STOREFRONTS System 402 Flush-Glazed Screw Spline Storefront A. Furnish and install aluminum architectural storefront system
Schlüter -KERDI-BOARD Substrate, structural panel, bonded waterproofing
Substrate, structural panel, bonded waterproofing The universal substrate for tiles Perfect covering No matter whether you work with mosaics or large format tiles, an absolutely level substrate with straight
Twiga Insul. India's Leading Thermal and Acoustic Insulation. Insulating India
Twiga Insul India's Leading Thermal and Acoustic Insulation Insulating India Insulating India Twiga is the leading manufacturer of glass wool insulation in India, with a twenty-five year track record of
Siting and settlement: The most important way to protect shelter from floods is to build in a place that is unlikely to be flooded.
Siting and settlement: The most important way to protect shelter from floods is to build in a place that is unlikely to be flooded. Key Messages Shelters and settlements should be sited above the highest
Ozone in Cooling Towers : Hygiene for us
Ozone in Cooling Towers : Hygiene for us Dr. Matthias Hoffmann BWT Wassertechnik GmbH, Industriestrasse 7, D-69198 Schriesheim, Germany Keywords: Ozone, Cooling Tower, Legionella, Hygiene, Air conditioning,
MicroPro /LifeWood Construction Product Specification Guide
MicroPro /LifeWood Construction Product Specification Guide PRESERVATIVE TREATMENT Osmose, Inc. PO Drawer O 1016 Everee Inn Road Griffin, GA 30224-0249 Phone: (800) 241-0240 Phone: (770) 233-4200 Fax:
The Advantages of Flax Fibers in Composites 17 18 June 2009, Frankfurt. Medical Industrial Automotive Filtration Apparel June 2009 Page 1
The Advantages of Flax Fibers in Composites 17 18 June 2009, Frankfurt June 2009 Page 1 The Advantages of Natural Fibers why should we use them? The use of natural fibers in the manufacture of technical
Intensive Training in Press-hardening. Module A Heat-Treatment and Hot Forming of Steel
Intensive Training in Press-hardening Module A Heat-Treatment and Hot Forming of Steel Presented by: Scientific management: GRUNDIG AKADEMIE, Academy of of Economics and Technology Prof. Dr. Kurt Steinhoff,
Development of an innovative bio-based structural adhesive
Development of an innovative bio-based structural adhesive Blanca Palomo, R&D Engineer blanca.palomo@rescoll.fr RESCOLL Independent research company located in Pessac (33) specialized in technologic innovation
LEED PRESENTATION OUTLINE
16902 BOLSA CHICA STREET, SUITE 101 HUNTINGTON BEACH, CA 92649 TELEPHONE (714) 840-8230 FACSIMILE (714) 840-2490 LEED PRESENTATION OUTLINE I. Overview of Green Building and Risks Involved with Sustainability
Tsawwassen BC Arena Before & After installation of the Low-E ceiling
LOW EMISSIVITY CEILINGS Emissivity- Describes the ability of a certain material to radiate heat rather then absorb it. Materials that radiate 100% have an (EM) of 1.0, while materials that radiate no heat
FOUNDATION INSULATING SYSTEM, INCLUDING WATERPROOFING AND DAMP PROOFING
FOUNDATION INSULATING SYSTEM, INCLUDING WATERPROOFING AND DAMP PROOFING insulation installed on foundation walls must be separated from the building interior with a code approved thermal barrier. Foam
Applicant s Research Profile. Univ.-Prof. Dr.-Ing. habil. Dipl.-Wirt. Ing.
Applicant s Research Profile Personal Information Last Name, First Name: Cherif, Chokri Academic Title: Univ.-Prof. Dr.-Ing. habil. Dipl.-Wirt. Ing. Birthday: 24.05.1966 Nationality: Marital Status: Institution:
Metal Injection Molding (MIM) of components made of Titanium and its alloys
Metal Injection Molding (MIM) of components made of Titanium and its alloys 1 Presentation content Introduction to Metal Injection Molding (MIM) Technology - explaination Products - examples Company brief
M.S. in Civil Engineering
M.S. in Civil Engineering M.S. in Civil Engineering Degree Requirements Students who do not have a bachelor's degree in civil engineering, but who want to obtain a master's degree in civil engineering
Radioactive Waste Storage Facility and Tank System Design Criteria Standards
UCRL-AR-133355 Rev 1 Radioactive Waste Storage Facility and Tank System Design Criteria Standards John Wood Rich Michalik Karen Doiron May 1999 DISCLAIMER This document was prepared as an account of work
HOOVER TREATED WOOD PRODUCTS, INC. TECHNICAL NOTE FOR ADDITIONAL INFORMATION: 1-800-TEC-WOOD (832-9663)
HOOVER TREATED WOOD PRODUCTS, INC. TECHNICAL NOTE FOR ADDITIONAL INFORMATION: 1-800-TEC-WOOD (832-9663) Fire-Retardant-Treated Wood Framed Wall Assemblies GENERAL INFORMATION Fire-resistant construction
SPREFIX SPRAY INSULATION _ in the marine market.
SPREFIX SPRAY INSULATION _ in the marine market. A self-adhesive glass or stone wool, sprayed directly onto surface.. Easily applied to wood, steel, plastic or other surfaces without any mechanical fasteners
SILICONE RUBBER: THE DEFINITIVE GUIDE WHITE PAPER
SILICONE RUBBER: THE DEFINITIVE GUIDE WHITE PAPER February 2014 Executive Summary J-Flex has created this comprehensive Guide to Silicone Rubber to be used as a valuable resource for all those working
Two-Year Post-Professional Degree (Path A) MASTERS OF ARCHITECTURAL DESIGN & URBANISM (MADU) With a Concentration in Classical Architecture
Two-Year Post-Professional Degree (Path A) MASTERS OF ARCHITECTURAL DESIGN & URBANISM (MADU) With a Concentration in Classical Architecture ARCH 61011 Introduction to Architectural Representation 0 TOTAL
www.campus elgouna.tu berlin.de Know the TU Berlin Campus El Gouna
Know The TU Berlin Campus El Gouna www.campus elgouna.tu berlin.de Know the TU Berlin Campus El Gouna 1 What Makes TUB CG? Campus El Gouna is a satellite campus of the TUB in Germany. A Non Profit Public
THE CHRISTMAS TREE INDUSTRY IN THE U.S.A. A STATUS REPORT M. L. McCormack, Jr. and Wolfgang Mieder
THE CHRISTMAS TREE INDUSTRY IN THE U.S.A. A STATUS REPORT M. L. McCormack, Jr. and Wolfgang Mieder There is a wide variation in the volume of Christmas trees produced by individual growers across north
THE PROVISIONAL CENTRAL PRODUCT CLASSIFICATION
THE PROVISIONAL CENTRAL PRODUCT CLASSIFICATION GROUP 867 ARCHITECTURAL, ENGINEERING AND OTHER TECHNICAL SERVICES Excerpt from CPCprov-en-Publication.doc - United Nation Statistic Division Group Class Subclass
Asbestos Encapsulation Solutions
Asbestos Encapsulation Solutions Eliminate your Asbestos problem quickly, safely, effectively and at an affordable price, with SealPro Sealants and Coatings SealPro ACM-REPELLO - and or ACM-SUPABOND (