Locinox hinges. Built to last!

Size: px

Start display at page:

Download "Locinox hinges. Built to last!"

Randell Leonard
6 years ago
Views:

1 Locinox hinges uilt to last!

LONOX N SPTONS OR LT N RT OPNN TS ll Locinox hinges are left/right interchangeable. No need to keep 2 different versions in stock. MXMUM USTLTY Up to 4-dimensionally adjustable.

RUSTPROO MTRLS esigned with rustproof materials. specially designed for exterior use: rain & frost-proof. MOULRTY The products in our range are designed for maximum interchangeability.

Locinox always opts for hot-dip galvanisation where competitors use electro-galvanisation or zinc-plating.

is a process where a finished, steel product is dipped into a vat containing molten zinc.

alvanised coating can easily withstand any abrasive forces applied during the installation of a fence or gate. Locinox eyebolt tested: 0 hour salt spray cabinet.

2 LONOX N SPTONS OR LT N RT OPNN TS ll Locinox hinges are left/right interchangeable. No need to keep 2 different versions in stock. MXMUM USTLTY Up to 4-dimensionally adjustable. TST ll products have been tested on a minimum of 1,000 movements and successfully passed rigorous salt spray tests. NT-TT f possible Locinox always provides an anti-theft security. RUSTPROO MTRLS esigned with rustproof materials. specially designed for exterior use: rain & frost-proof. MOULRTY The products in our range are designed for maximum interchangeability. multitude of combinations is possible so you will always be able to fulfill your clients wishes. OT-P LVNSTON: LSTS 10 TMS LONR! Locinox always opts for hot-dip galvanisation where competitors use electro-galvanisation or zinc-plating. The process however covers the products with a layer thickness of minimum µm up to 1 µm (electro-galvanisation: 5 to 25 µm). is a process where a finished, steel product is dipped into a vat containing molten zinc. This total submersion ensures that hidden corners, crevices and holes are all covered with a protective coat, leaving no place for corrosion to start forming unnoticed. alvanised coating can easily withstand any abrasive forces applied during the installation of a fence or gate. Locinox eyebolt tested: 0 hour salt spray cabinet. = 5 years of outdoor use = 20 years of outdoor use ORROSON Locinox products are of industrial quality. They are tested extensively by our R& department in the most extreme circumstances. We test every product a minimum of 1,000 movements before bringing it to the market. salt spray test learns us that hot-dip galvanising is the correct surface treatment for products that are used for years outside. Zinc plated hinges soon loose their shiny appearance and corrosion sets in. orrosion which could after only a few years limit or even prevent the opening or closing of the gate. Zinc plated eyebolt tested: hours salt spray cabinet. eyebolt competitor eyebolt competitor eyebolt competitor = 3 months of outdoor use = 1 year of outdoor use

ndustrial gates inges carry the whole weight of the gate and ensure that it smoothly opens and closes.

MU4SL - Vandalproof 4-180 hinge 90Z - Vandalproof 90 hinge PTNT Secured version (anti-theft cover and eyebolt security) of the adjustable 4 180 hinge.

nti-theft nti-theft MU4-4 - 180 hinge PTNT ot-dip galvanised 180 welding hinge. djustable in 4 dimensions and hot-dip galvanised.

L 412 90 70 M12 70 37,5 35 31 39 47 85 24 416 0 85 M16 80 42 43 48 88 29 Welding parts in black steel () Welding parts zinc plated (Z) MU412- MU412-Z yebolt

3 ndustrial gates inges carry the whole weight of the gate and ensure that it smoothly opens and closes. ecause of this heavy task, our hinges are hot-dip galvanised or made of stainless steel. The MU4SL hinge is our top of the line. djustable in 4 dimensions. MU4SL - Vandalproof hinge 90Z - Vandalproof 90 hinge PTNT Secured version (anti-theft cover and eyebolt security) of the adjustable hinge. ot-dip galvanised and adjustable in 4 dimensions. ot-dip galvanised, anti-theft 90 hinge with 27 mm adjustability. nti-theft nti-theft MU hinge PTNT ot-dip galvanised 180 welding hinge. djustable in 4 dimensions and hot-dip galvanised. Reversible (no more left or right turning gates). L M , M Welding parts in black steel () Welding parts zinc plated (Z) MU412- MU412-Z yebolt M12 nti-theft MU416- MU416-Z yebolt M16 MU420- MU420-Z yebolt M20 MU hinge 180 welding hinge. djustable in 3 dimensions and hot-dip galvanised. 103 MN. 51 L MN. L MU4SL M , MU4SL M M M16 Ø21 Ø25, , M M20 Ø25 Ø29, , Ø Min. M M M M M M M M M M Welding parts in black steel () Welding parts zinc plated (Z) MU--M12 MU-Z-M12 yebolt M12 MU--M16 MU-Z-M16 yebolt M16 MU--M18 MU-Z-M18 yebolt M18 nti-theft MU--M20 MU-Z-M20 yebolt M20 MU--M22 MU-Z-M22 yebolt M22

arden gates arden gates have a double function.

SWN - Spring hinge set with stainless steel M12 axle and adjustable closing force for garden gates Spring hinge set to slide into the x mm gate post.

lack steel welding ears included Ø 13 0 M12- inge axle: mm 10TPS-M12-6 27 M12 1 M12-1 inge axle: 1 mm 10TPS-M12-1 35 Ø 20 M12 - arden gate hinge-set with stainless steel

Ø 13 polyamide post plug M12 M12-30- inge axle: mm 10TPS-M12- M12-30-1 inge axle: 1 mm 10TPS-M12-1 M12-- inge axle: mm 10TPS-M12- M12--1 inge axle: 1 mm 10TPS-M12-1

gate hinge-set with hot-dip galvanised M16 hinge axles. Polyamide or aluminium post plugs included inge set with 1 or 180 mm axle.

4 arden gates arden gates have a double function. They prevent access to the garden for strangers but they also make sure that little children or animals can t reach the street. Rely on us, also for your garden gates! SWN - Spring hinge set with stainless steel M12 axle and adjustable closing force for garden gates Spring hinge set to slide into the x mm gate post. One for the top, one for the bottom. SWN- SWN-1 inge axle: mm inge axle: 1 mm M12 - arden gate hinge-set with stainless steel M12 hinge axles. lack steel welding ears included Ø 13 0 M12- inge axle: mm 10TPS-M M12 1 M12-1 inge axle: 1 mm 10TPS-M Ø 20 M12 - arden gate hinge-set with stainless steel M12 hinge axles. Polyamide or aluminium post plugs included inge set with or 1 mm axle. asy to install in square 30 or mm profiles by means of a post plug. Ø 13 polyamide post plug M12 M inge axle: mm 10TPS-M12- M inge axle: 1 mm 10TPS-M12-1 M12-- inge axle: mm 10TPS-M12- M12--1 inge axle: 1 mm 10TPS-M12-1 M12-P-- inge axle: mm 10TPS-M12- M12-P--1 inge axle: 1 mm 10TPS-M12-1 P version: aluminium reinforced post plug (UR) 12 28, ,5 32 P version M16 - arden gate hinge-set with hot-dip galvanised M16 hinge axles. Polyamide or aluminium post plugs included inge set with 1 or 180 mm axle. asy to install in square or mm profiles by means of a post plug. Ø 17 polyamide post plug M16 M16--1 inge axle: 1 mm 10S-M16-1 M inge axle: 180 mm 10S-M M16-P--1 inge axle: 1 mm 10S-M16-1 M16-P--180 inge axle: 180 mm 10S-M M16-P--1 inge axle: 1 mm 10S-M16-1 M16-P--180 inge axle: 180 mm 10S-M P version: aluminium reinforced post plug (UR) 18 33, P version P version

Ornamental gates n ornamental gate is welcomes you, your guests or your clients.

hoose Locinox as aesthetic, reliable solution for all your ornamental gates!

M20 M20 35 29 52 Ø32 Ø46 M24 M24 45 34 57 Ø35 Ø Ø Ø 53 Welding parts black steel ()

base 35x35 mm -ORN--M24 -ORN-Z-M24 Welding base x mm LRM20 LRM24 LRM24 LRM27 -ORN--M27

ot-dip galvanised base plate compatible with the gate pivot P--35, P--, and P-- so you

P - ate pivot point vailable in black steel (P--xx) or zinc plated (P-Z-xx).

36,5 36,5 79 36,5 25 25 25 Ø 22,7 35 Ø 29 Ø 22 Ø 34 Ø 22 Ø 44 Ø 22 24 P35 P P 123 lack

5 Ornamental gates n ornamental gate is welcomes you, your guests or your clients. t has to operate faultlessly and needs quality components to do so. hoose Locinox as aesthetic, reliable solution for all your ornamental gates! -ORN - Ornamental hinge set ot-dip galvanised hinge set including greaser and adjustable nut for ornamental gates. The welding base is available in black steel (-ORN--xx) or zinc plated (-ORN-Z-xx). M20 M Ø32 Ø46 M24 M Ø35 Ø Ø Ø 53 Welding parts black steel () Welding parts zinc plated (Z) M27 M Ø38 Ø53 Ø 46 -ORN--M20 -ORN-Z-M20 Welding base 35x35 mm -ORN--M24 -ORN-Z-M24 Welding base x mm LRM20 LRM24 LRM24 LRM27 -ORN--M27 -ORN-Z-M27 Welding base x mm P-U-S - ase plate and plate holder for gate pivot frame ot-dip galvanised base plate compatible with the gate pivot P--35, P--, and P-- so you only need to keep 1 single product in stock. P - ate pivot point vailable in black steel (P--xx) or zinc plated (P-Z-xx). ll gate pivot points are compatible with the P-U-S. 36,5 36, , Ø 22,7 35 Ø 29 Ø 22 Ø 34 Ø 22 Ø 44 Ø P35 P P 123 lack steel () Zinc plated (Z) P--35 P-Z-35 or profiles 35 x 35 mm. P-- P-Z- or profiles x mm. P-- P-Z- or profiles x mm. WLL PLTS ot-dip galvanised wall plates WPM20 5WPM24 5WPM27 5WP M12 M Ø7 M16 M Ø M20 M Ø53 5WPU ,5 5

139 135 95 LSO N OUR PROUT RN 3M - 3 adjustable hinge for metal gates Stainless steel

The hinge is adjustable in three dimensions: height, left/right alignment and swing

= = 4x Ø 15 = = 35,4 12,6 43 3M-VP-P-2 3M-VP-P- Stainless steel hinge arm ot-dip

hinge. direction. lso available with hot-dip galvanised arm (2, 3 of 0 mm).

galvanised hinge arm (2 mm) Stainless steel hinge arm (3 mm) ot-dip galvanised hinge

wooden gates esthetic, vandal proof hinge.

eight, depth, left / right alignment and rotational direction can be adjusted.

Ø 10,5 15 27,5 0 0 300 Ø 9 4W-300-2 4W-0-2 4W-0-2 inge arm: 300 mm, 3x Ø 9 mm inge

6 LSO N OUR PROUT RN 3M - 3 adjustable hinge for metal gates Stainless steel hinge for aluminium/metal gates equipped with the fast Quick-ix system. The hinge is adjustable in three dimensions: height, left/right alignment and swing direction. lso available with hot-dip galvanised arm. = = 4x Ø 15 = = 35,4 12,6 43 3M-VP-P-2 3M-VP-P- Stainless steel hinge arm ot-dip galvanised hinge arm 18 3W - 3 adjustable hinge for wooden gates Stainless steel hinge. The hinge is adjustable in three dimensions: height, left/right alignment and swing direction. lso available with hot-dip galvanised arm (2, 3 of 0 mm). Ø 10, W-2-2 3W-2-3W-3-2 3W-3-3W-4- Stainless steel hinge arm (2 mm) ot-dip galvanised hinge arm (2 mm) Stainless steel hinge arm (3 mm) ot-dip galvanised hinge arm (3 mm) ot-dip galvanised hinge arm (4 mm) W - 4 adjustable hinge for wooden gates esthetic, vandal proof hinge. The stainless steel hinge can be adjusted in 4 dimensions. eight, depth, left / right alignment and rotational direction can be adjusted. djustments can be made after installation. Ø 10, , Ø 9 4W W-0-2 4W-0-2 inge arm: 300 mm, 3x Ø 9 mm inge arm: 0 mm, 4x Ø9 mm inge arm: 0 mm, 5x Ø 9 mm 0 0 LONOX Mannebeekstraat Waregem LUM -mail: locinox@locinox.com Website: Tel. +32 (0) ax. +32 (0)

Organisational Kitchen Fittings Kitchen Cabinet Fittings

Organisational Kitchen Fittings Kitchen Cabinet Fittings Pull-out wire storage basket Finish: Chrome plated Load capacity: 30 kg Installation depth: 400 mm Version: Runners and baskets separated, designed for wardrobe interiors without doors Type of pull out: