FAST INFO FIRE PROTECTION STEEL RANGE OF VARIANTS

Transcription

1 FAST INFO FIRE PROTECTION STEEL RANGE OF VARIANTS

2 FIRE PROTECTION STEEL THE PENEDER PRODUCT RANGE PENEDERswing door Made-to-measure range PENEDERswing gate Unique size and stability PENEDERsliding gate Hidden fire protection PENEDERhigh-speed sliding gate High-speed and fire protection in one gate PENEDERlift gate Strong in both large and small versions RANGE OF VARIANTS Peneder steel fire protection products can take on any challenge. Choose from the wide selection of different border designs, sizes, finishes, and frame types; different glass panels also available on request. Customers of Peneder Fire Protection are on the safe side. We guarantee that all of our products and services are manufactured and executed in accordance with the law. There are no compromises when it comes to safety. Alle Profile mit der gesamten Varianten- und Kombinationsvielfalt sind auch in der Standardausführung ohne Feuerschutzanforderungen erhältlich. 2 3

3 THE BEST QUALITY NO COMPROMISES Tested fire protection Fire protection is our main area of expertise. All doors and gates are tested and certified in their specified fire protection classes. Delivery is also possible without fire protection requirements. Inlet - guide rails We are the only manufacturer to have also tested and approved gate systems without inlets. With CE mark in accordance with statutory requirements. Pedestrian access and emergency exit doors - can be built into all gates - minimum headroom for maximum access clearance possible for small gate heights - glazing and ventilation grilles* possible - no sills for swing and lift gates *not available in Switzerland Glass elements - can be installed in all doors and gates - square, round and special shapes available - different types of glass - several glazings possible: in all elements and in any built-in pedestrian access door Material - made of structural or stainless steel - galvanised or coated Finish - RAL, NCS - effect coating - brushed stainless steel Fittings - quality commercial fittings in different colours and finishes - all common locks and fittings in accordance with EN 179 and EN 1125 can be used. Electrical installations / motors All standard electronic opening systems, reed and electrical contacts, magnetic locking systems, etc. can be installed. Our products are also suitable for motorisation - delivery as a complete system or prepared for motorisation Frames for fire protection doors - 53 frame types to choose from - from standard frames to renovation frames - rebated and mounted flush - particularly robust due to 2mm plate thickness - welded or bolted MADE-TO-MEASURE READY FOR COLLECTION AFTER 30 HOURS What might be a special solution for others, is standard at Peneder. Nothing is impossible! Each item is made-to-measure to suit your needs. As a comprehensive supplier, we are always able to offer you the best possible solution. You won t have to wait long for your made-to-measure, customised product: 30 hours ex works that s how fast things are at Peneder. EXPERT SOLUTIONS FROM A CONTACT PARTNER At Peneder Fire Protection you will always have just one contact partner who knows you and is familiar with your fire protection needs. This saves you a lot of time and hassle. Our customer advisers are not looking for excuses, but find solutions. We take responsibility for your order. 4 5

4 PENEDERswing door MADE-TO-MEASURE RANGE Regardless of your fire protection requirements, you have found the right solution in the PENEDER swing door. Whether you need a traditional standard swing door, a double wing custom-made swing door with an unrivalled height of 3700mm, sound insulation, smoke protection or a renovation frame this range of made-to-measure products is unique to Peneder Fire Protection. Versions 1-wing (standard swing door) 1-wing (Peneder custom-made swing door) Sm-C smoke protection door also available with side parts and upper lights also available as smoke protection or sound-proof door also available as sound-proof door 2-wing (Peneder custom-made swing door) Sm-C smoke protection door 30 also available with side parts and upper lights 30 also available as smoke protection or sound-proof door 90 also available as sound-proof door Sizes Width 1-wing Width 2-wing up to 1,500mm up to 3,000mm Height up to 3,700mm Area up to 13.98m2 Glazing up to 1.6m2 / wing Flush-mounted, 2-wing, stainless steel version 2-wing, powder-coated FEATURES - 53 frame types to choose from, 2mm frame plate - also available in sound-proof or smoke protection versions - renovation frames without the need for building work and without reducing access clearance - unrivalled size dimensions and perfect appearance, without cutting metal sheets - three-dimensional adjustable, maintenance-free hinges - also available with ventilation grilles* and glass panels *not available in Switzerland 6 7

5 PENEDERswing door SECTIONAL DRAWINGS (SELECTION) Wall clearance width Floor clearance width Stationary wing width Wall clearance width Floor clearance width Access wing width Swing door, 1-wing Swing door, 2-wing 00/EI30 rebated - corner frame 45 00/EI30 rebated - block frame 70 EI90 rebated - corner frame 45 EI90 rebated - block frame 70 00/EI30 rebated - block frame 85 Smoke protection - wall plug mounting 00/EI30 rebated - corner frame 45 Smoke protection - wall plug mounting 00/EI30 flush-mounted - block frame 60 00/EI30 flush-mounted - corner frame 45 00/EI30/EI90 rebated - attachment frame 00/EI30 rebated - renovation frame SG Without mounting joist Mounting joist angle (20mm) Mounting joist angle (20mm) + four-sided door panel Retractable bottom seal Planet PU 8 9

6 PENEDERswing gate UNIQUE SIZE AND STABILITY With PENEDER swing gates, the focus is on size and stability. You won t find a better swing gate in this fire protection class. Specially developed gate hinges support the enormous weight even after being tested to 50,000 opening cycles. At Peneder, we never compromise on fire protection or quality. Versions 1-wing 120-C available for special requirements 2-wing 120-C available for special requirements Sizes Width Height Gate area up to 5,600mm up to 6,100mm up to 28.8m² Swing gate with built-in pedestrian access door Glass section, inset handle in pedestrian access door and in door panel FEATURES - the largest fire protection swing gate - particularly stable construction, specially developed hinges - available with built-in emergency exit, glass panels, etc. - modular construction allows mounting in very tight spaces 10 11

7 PENEDERswing gate SECTIONAL DRAWINGS Wall clearance width Floor clearance width Wall clearance width Floor clearance width 1-wing swing door 2-wing swing door Block frame Corner frame 12 13

8 PENEDERsliding gate HIDDEN FIRE PROTECTION PENEDERsliding gates make your fire protection measures invisible, as there are no ground sills and, optionally, also no inlet profiles. This allows you to secure openings of up to 46m2 with fire protection technology. You can, of course, also show off your PENEDER sliding gate; the gate has a look that is certainly worth seeing. Versions 1-wing EI2 EI2 1-wing with 2- or 3-part telescopic execution 2-wing 2-wing with 2-part telescopic execution Sizes Width Height Gate surface area up to 16,000mm up to 7,500mm up to 46,75m² Sliding gate, 2-wing Telescopic sliding gate, 1-wing with 2-part telescopic execution FEATURES - available without inlet profile - no sills in entire opening area - sill-free emergency exit - just 100mm of headroom needed for emergency exits (2000mm emergency exit possible for a frame clearance of 2100mm) 14 15

9 PENEDERsliding gate SECTIONAL DRAWINGS (SELECTION) Wall clearance width Wall clearance width EI30 1-wing normal inlet EI90 1-wing normal inlet EI30 wall mounting EI30 ceiling mounting EI30 suspended ceiling mounting EI90 wall mounting EI90 ceiling mounting EI90 suspended ceiling mounting EI30 redirected weight 1-wing EI30 edgeless inlet 1-wing EI30 without inlet EI90 redirected weight 1-wing EI90 edgeless inlet 1-wing EI30 redirected weight 2-part telescopic EI30 edgeless inlet 2-part telescopic EI30 normal inlet 2-part telescopic EI90 redirected weight 2-part telescopic EI90 edgeless inlet 2-part telescopic EI90 normal inlet 2-part telescopic 16 17

10 PENEDERhigh-speed sliding gate HIGH-SPEED AND FIRE PROTECTION IN ONE GATE When speedy opening is just as important as reliable fire protection, the PENEDER high-speed sliding gate is the perfect choice. It also scores points with its impressive gate area of up to 16.27m² and is approved for motors from all popular manufacturers. Versions 1-wing (also available without fire protection requirements) Sizes Width Height Gate surface area up to 5,600mm up to 4,200mm up to 16.27m² 2-wing (also available without fire protection requirements) Approved for motors from all major manufacturers! Horizontal cut Vertical cut edgeless inlet without inlet High-speed sliding gate, 1-wing with glass panel 2-wing version with glass panels FEATURES - high-speed gate and fire protection in just one gate - high-speed gate with fire protection available in unrivalled sizes - also available in large dimensions with extremely high opening speeds - with glazing - available in full stainless steel version - available with sill-free, built-in pedestrian access door 18 19

11 PENEDERlift gate STRONG IN BOTH LARGE AND SMALL Do you have limited space or want to keep the wall free? This is where the PENEDER lift gate comes in. The field of application starts at opening sizes of just 700 x 700mm (for example for conveyor belt wind-up). Whether big or small, all PENEDER lift gates are equipped with a unique chain suspension system which allows your fire protection gate to open and close smoothly and accurately. Versions Lift gate Lift gate with 2-part telescopic extension Sizes Width Height up to mm up to mm Gate area up to 46,75 m 2 Lift gate, galvanised external view Lift gate, galvanised - interior view FEATURES - available in sizes from just 700 x 700mm - available in sizes up to 8500 x 5500mm - stable opening and closing process thanks to unique chain suspension system - available with glazing - available in stainless steel version - available with sill-free, built-in pedestrian access door 20 21

12 PENEDERlift gate SECTIONAL DRAWINGS Wall clearance hight Wall clearance hight Lift gate Telescopic lift gate Lateral guidance Telescopic lateral guidance You can find further information at:

13 Subject to typographical errors, printing errors, mistakes and technical product changes. Version 1.0, December 2012 Peneder Bau-Elemente GmbH Sparte Feuerschutz Ritzling 9, A-4904 Atzbach Tel: +43 (0) 50 / Fax: +43 (0) 50 / [email protected] Peneder Bauelemente AG Herostrasse 9, CH-8048 Zürich Tel: +41 (0) 43 / Fax: +41 (0) 43 / [email protected]