CURRICULUM VITAE GUSRI AKHYAR IBRAHIM

Transcription

1 CURRICULUM VITAE GUSRI AKHYAR IBRAHIM Permanent address: Perum Griya Kencana A4 Rajabasa, Bandar Lampung, Telephone: sati1771@gmail.com Place / Date of Birth : Kawai Batu Bulat, Indonesia / August 17 th, 1971 Occupation : Mechanical Engineering Lecturer, Lampung University, Bandar Lampung, Indonesia Office address : Mechanical Engineering Department, Faculty of Engineering, Lampung University Jl. Soemantri Brojonegoro, Bandar Lampung, Indonesia Phone : , fax Sex : Male Proficiency in Languages : English Marital Status : Married Health : Excellent Height : 158 cm Weight : 59 kg 1

2 Formal Education Dates from to University/School Discipline National University of Malaysia Gadjah Mada University, Yogyakarta Sriwijaya University Palembang Doctoral Philosophic, Machining in Aerospace Materials, Manufacturing Master of Engineering, Graduate Program of Mechanical Engineering, in Material Science Under Graduate Program of Mechanical Engineering MAN Pdg Panjang Senior High School SMPN 5 Lintau Junior High School SDN 17 Lintau Elementary School Job Experiences 2010 As post doctoral at Mechanics and materials engineering of National University of Malaysia 2009 Demonstrator at CNC Lathe machine of Laboratory and Workshop at of Engineering Faculty of Universiti Kebangsaan Malaysia 2008 As a lecturer at the Malaysian France Institute of University Kuala Lumpur 2008 As demonstrator of vacuum forming machine for undergraduate students Demonstrator at CNC Laboratory and Workshop at of Engineering Faculty of Universiti Kebangsaan Malaysia 2

3 Demonstrator at Hydraulic and dynamic Laboratory of Engineering Faculty of Universiti Kebangsaan Malaysia Vice chairman of Manufacturing Laboratory Teaching Staff in Mechanical Engineering Department, Lampung University Head Staff of Drawing Laboratory 1995 Job Training at PT. PUSRI, Indonesia. As reviewer 1. As reviewer at International Conference on Advanced Science, Engineering and Information Technology (ICASEIT) January 2011, Kuala Lumpur, Malaysia. 2. As reviewer at The Second International Conference on Advanced Science, Engineering and Information Technology (2 nd ICASEIT), September 2011, Kuala Lumpur, Malaysia. 3. As reviewer at Journal of Scientific Research, Rajshasi University, Bangladesh. Teaching (subjects) 1. Process Production and System Engineering 2. Machining Process 3. Coating Technology 4. Foundry Technology 5. Forming Engineering 6. Static structure I & II 7. Materials Engineering 8. Machine Element I, II & III 9. Kinematics and dynamics 10. Drawing Engineering I & II 3

4 Trainings 2010 Training for measurement equipment such as surface hardness tester, laser microscope for topography and tool wear microscope 2009 Training for Scanning Electron Microscope 2008 Training for Machine Integrated System for Education 2007 Training for Confocal Laser Microscope August 2006 August 2006 July 2006 August 2000 Training for Surface Roundness, Mahr Training for Surface Roughness, Mahr Training for CNC Lathe Machine Colchester English proficient 2000 Training for Teaching skill and strategy June 1999 March 1999 Training in CNC machine and CAD Workshop in Engineering curriculum based ABET standard Researchs 1. Cryogenic machining 2. Optimization of difficult-to-cut materials using Taguchi Method and Response Surface Method in turning and milling, Study on tool performance and surface integrity of Inconel 718 during machining with coated and coated carbide tool under dry cutting, MQL and wet condition Surface integrity of Ti-6Al-4V ELI when finish machining with uncoated, CVD and PVD coated carbide insert under dry cutting condition at high cutting speed, Performance of cemented carbide tools and wear characteristic when turning of Ti- 6Al-4V ELI under dry cutting condition

5 6. Turning of Ti-6Al-4V ELI Using Coated and Uncoated Carbide tools under dry machining, Effect of Cutting Parameters on Surface Roughness of AISI D2 in Turning Using Coated and Uncoated Carbide Tools, Research in Mechanic and Material Department of National Univeristy of Malaysia, Surface Integrity and quality of AISI D2 When Turned Using Coated and Uncoated Carbide Tools, Research in Mechanic and Material Department of National Univeristy of Malaysia, Performance of Coated and Uncoated Carbide Tools in Turning AISI D2, Research in Mechanic and Material Department of National Univeristy of Malaysia, The Influence of cutting parameters on tool life of high speed steel, Gadjah Mada University Press, Performance of high speed steel tools which are coated by Titanium and Nitrogen by Using Sputtering Method DC, as final research of Master Program, Gadjah Mada University, Deposition of TiN Thin Film on High Speed Steel Substrate by Using Sputtering Method DC, Gadjah Mada University, Characteristic of Centrifugal Compressor as final project of under graduate Student, at Sriwijaya University, Published Papers International Journals 1. G.A. Ibrahim, C.H. Che Haron, J.A. Ghani, A.Y. Abu Said, M.Z. Abu Zaid, Performance of PVD coated carbide tools when turning inconel 718 in dry machining. Advanced in Mechanical Engineering, Vol. 2011, pp G.A. Ibrahim, C.H. Che Haron, J.A. Ghani., Evaluation of PVD-inserts performance and surface integrity when turning Ti-6Al-4V ELI under dry machining. Advanced Materials Research, Vol , pp G.A. Ibrahim, C.H. Che Haron, C.H. Azhari, Sustainable rural energy: Traditional water wheel in Padang (PWW), Indonesia. International Journal of Renewable Energy Technology, Vol. 2, No. 1, pp C.H. Che Hassan, J.A. Ghani, M.S. Kasim, Gusri, A.I., M.A. Sulaiman, Surface integrity of Inconel 718 under MQL condition. Advanced Materials Research, Vol , pp M.Z.A. Yazid, Che Hassan, C.H., Jaharah, A.G., Norhamidi, M., Gusri, A.I., Ahmad Yasir, M.S Tool wear PVD coated carbide tool when finish turning inconal 718 under high speed machining. Advanced Materials Research, Vol , pp

6 6. Ahmad Yasir, M.S., Che Hassan, C.H., Jaharah, A.G., Norhamidi, M., Gusri, A.I., M. Zaid, A.Y Cutting force analysis when milling Ti-6Al-4V under dry and near dry condition using coated tungsten carbides. Advanced Materials Research, Vol , pp G.A. Ibrahim, C.H. Che Haron, J.A. Ghani Tool wear mechanism in continuous cutting of difficult-to-cut material under dry machining. Advanced Materials Research, Vol , pp G.A. Ibrahim, C.H. Che Haron, J.A. Ghani Tool wear performance of CVD insert during machining of Ti-6Al-4V ELI at high cutting speed. Key Engineering Materials, Vol. 443, pp G.A. Ibrahim, C.H. Che Haron, J.A. Ghani Taguchi optimization method for surface roughness and material removal rate in turning of Ti-6Al-4V ELI. International Review of Mechanical Engineering, Vol. 4, No. 3, pp G.A. Ibrahim, C.H. Che Haron, J.A. Ghani Surface Integrity of Ti-6Al-4V ELI when machined using coated carbide tools under dry cutting condition. International Journal of Mechanical and Materials Engineering, Vol. 4, No. 2, pp G.A. Ibrahim, C.H. Che Haron, J.A. Ghani Progression and wear mechanism of CVD carbide tools in turning Ti-6Al-4V ELI. International Journal of Mechanical and Materials Engineering, Vol. 4, No. 1, pp Y. Burhanuddin, C.H. Che Haron, J.A. Ghani, A.K. Ariffin, G.A. Ibrahim, A. Yasir, N.H. El-Maghribi, The effect of CBN cutting tool grades on the tool life and wear mechanism when dry turning of titanium alloy. Asian International Journal of Science and Technology in Production and Manufacturing Engineering, Vol. 1, No Ahmad Yasir, Che Hassan, Jaharah Ghani, A.I. Gusri, B. Yanuar Machinablity of Ti-6Al-4V under dry and near dry condition using cemented carbide tools. The Open Journal for Manufacturing and Industrial Engineering. Vol. 2, pp G.A. Ibrahim, C.H. Che Haron, J.A. Ghani Application of Taguchi Method in the optimization of turning parameters for surface roughness. International Journal of Science Engineering and Technology, Vol. 1, No. 2, pp Gusri Akhyar, Che Hassan, Jaharah Ghani The effect of dry machining on surface integrity of titanium alloy Ti-6Al-4V ELI. Journal of Applied Science. Vol. 9, No. 1, pp Che Haron, C.H., Ghani, J.A. and Ibrahim, G.A Surface integrity of AISI D2 when turned using coated and uncoated carbide tools, International Journal of Precision Technology, Vol. 1, No. 1, pp International Proceedings 1. G.A. Ibrahim, C.H. Che Haron, J.G. Ghani Surface finish of titanium alloy Ti-6Al-4V ELI during machining using carbide inserts under dry cutting condition, Second Asia Pacific Conference on Manufacturing System, Yogyakarta, Indonesia, pp C.H. Che Haron, G.A. Ibrahim, J.G. Ghani, M.Z. Abu Yazid, H.S. Yunn 2009 Study on tool life and tool wear of coated carbide inserts when turning inconel 718 in dry machining, Second Asia Pacific Conference on Manufacturing System, Yogyakarta, Indonesia, pp

7 3. M.Z.A. Yazid, C.H. Che Haron, J.A. Ghani, G.A.Ibrahim and M.S.A. Yasir. 2009, Tool wear when finish turning inconel 718 under dry conditions, Second International Seminar on Green Technology and Engineering, Universitas Malahayati, Bandar Lampung, Indonesia, pp M.S.A. Yasir, C.H. Che Haron, J.A. Ghani, G.A.Ibrahim and M.Z.A. Yazid. 2009, Performance of PVD coated tungsten carbide when milling Ti-6Al-4V under dry and near dry conditions, Second International Seminar on Green Technology and Engineering, Universitas Malahayati, Bandar Lampung, Indonesia, pp G.A.Ibrahim, C.H. Che Haron, J.A. Ghani, M.S.A. Yasir and M.Z.A. Yazid. 2009, Wear mechanism of Physical Vapor Deposition (PVD) carbide tool in orthogonal turning of aerospace material at high cutting speed, Second International Seminar on Green Technology and Engineering, Universitas Malahayati, Bandar Lampung, Indonesia, pp Gusri, A.I., Che Hassan, C.H., Jaharah, A.G Performance of Chemical Vapor Deposition (PVD) carbide insert in turning titanium alloy Ti-6Al-4V ELI at high cutting speed, Taibah International Chemical Conference, TaibahUniversity of Madinah. 7. Gusri, A.I., Che Hassan, C.H., Jaharah, A.G Surface integrity of Ti-6Al-4V ELI when machined using coated carbide tools under dry cutting condition. Malaysia Metallurgy Conference 2008, Universiti Kebangsaan Malaysia, Bangi Malaysia, pp A. Yasir, M.S., Che Hassan, C.H., Jaharah, A.G., Nagi, H.E., Yanuar, B., Gusri, A.I. 2007, Wear mechanism and performance of PVD Coated Tungsten Carbide When Milling of Ti-6Al-4V under MQL, Proceeding of CIRP International Conference on Modeling of Machining Operations, USA. 9. Gusri, A.I., Che Hassan, C.H., Jaharah, A.G., Yanuar, B., A. Yasir, Nagi, E. 2007, Performance of cemented carbide tools when turning Ti-6Al-4V-ELI under dry cutting condition, Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture, Advanced Processes and System in Manufacturing, Universiti Kebangsaan Malaysia, Malaysia, pp A. Yasir, M.S., Che Hassan, C.H., Jaharah, A.G., Nagi, H.E., Yanuar, B., Gusri, A.I. 2007, Effect of mist coolant (MQL) on tool life and surface integrity when milling of Ti-6Al-4V using coated tungsten carbide, Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture, Advanced Processes and System in Manufacturing, Universiti Kebangsaan Malaysia, Malaysia, pp A. Yasir, M.S., Che Hassan, C.H., Jaharah, A.G., Nagi, H.E., Yanuar, B., Gusri, A.I. 2007, Performance of PVD coated tungsten carbide when milling of Ti-6Al-4V under MQL, International Conference on Engineering and ICT, Universiti Teknikal Malaysia Melaka, Malaysia, pp A. Yasir, M.S., Che Hassan, C.H., Jaharah, A.G., Nagi, H.E., Yanuar, B., Gusri, A.I. 2007, Cutting force analysis and performance of PVD coated tungsten carbide when milling of Ti-6Al-4V under MQL, Proceeding International Conference on Engineering Technolgy, Universiti Kuala Lumpur. 13. A. Yasir, M.S., Che Hassan, C.H., Jaharah, A.G., Nagi, H.E., Yanuar, B., Gusri, A.I. 2007, Effect of MQL on tool life and surface roughness when milling of Ti-6Al- 4V using coated tungsten carbide, Student Conference on Research and Development, Universiti Tenaga National, Malaysia, pp

8 14. G.A. Ibrahim, C.H.Che Haron, J.A. Ghani, B. Yanuar and A. Yasir. 2007, Application of taguchi method in the optimization of turning parameters for surface roughness, International Seminar on Green Technology and Engineering, Universitas Malahayati, Bandar Lampung, Indonesia. 15. B. Yanuar, A. Yasir, M.S., Che Hassan, C.H., Jaharah, A.G., Nagi, H.E., Gusri, A.I. 2007, Effect of mist coolant (MQL) on tool life and cutting force when milling of Ti- 6Al-4V using coated tungsten carbide, International Seminar on Green Technology and Engineering, Universitas Malahayati, Bandar Lampung, Indonesia. 16. A. Yasir, M.S., Che Hassan, C.H., Jaharah, A.G., Nagi, H.E., Yanuar, B., Gusri, A.I. 2006, Application of mist coolant when milling of Ti-6Al-4V using coated tungsten carbide, International Conference on Science and Technology: Application in Industry and Education, Universiti Teknologi MARA Pulau Pinang, Malaysia. 17. C.H Che Haron, J.A.Ghani and G.A.Ibrahim 2006, Surface integrity of AISI D2 when turned using coated and uncoated carbide tools, International Conference on Manufacturing and Technology, Multi Media University, Malaka, Kuala Lumpur, pp C.H Che Haron, J.A.Ghani and G.A.Ibrahim 2006, Effect of cutting parameters on surface roughness of AISI D2 in turning using coated and uncoated carbide tools, International Conference on Manufacturing and Technology, University of Indonesia, Depok, Jakarta. 19. C.H.Che Haron, J.A. Ghani, G.A. Ibrahim, K. Husin, and T.S. Yong 2006, Performance of coated and uncoated carbide tools in turning AISI D2, International Conference of Manufacturing Innovation and Excellence Through Research and Development, University of Malaya, Kuala Lumpur. National Proceedings 1. Gusri, A.I., Che Hassan, C.H., Jaharah, A.G., Mohd. Zaid, A.Y Effects of machining on microstructures of Ti-6Al-4V ELI under dry cutting condition, Advance Manufacturing Research Group iii, Resident Hotel, Kajang, Malaysia. 2. Mohd. Zaid, A.Y, Che Hassan, C.H., Jaharah, A.G., Gusri, A.I Tool life and tool wear of PVD coated when finish turning inconel 718 under dry machining, Advance Manufacturing Research Group iii, Resident Hotel, Kajang, Malaysia, pp Gusri, A.I., Novri, T Wear progression and wear mechanism of carbide tools when orthogonal cutting aerospace material, The 4th Scientific Conference, Persatuan Pelajar Indonesia, University Kebangsaan Malaysia, Malaysia, pp Gusri, A.I., Che Hassan, C.H., Jaharah, A.G PVD carbide tool performance and attainable surface quality during machining of aerospace alloy, Advance Manufacturing Research Group ii, Port Dickson, Malaysia. 5. Gusri, A.I., Che Hassan, C.H., Jaharah, A.G., Yanuar, B., Yasir, A., Nagi, E Application of Taguchi method in optimizing turning parameters of titanium alloy. Proceedings of Seminar on Engineering Mathematics Universiti Kebangsaan Malaysia, hal Che Hassan, C.H., Jaharah, Gusri, A.I., A.G., Yanuar, B., A. Yasir, Nagi, E. 2008, The effect of dry machining on surface integrity of titanium Ti-6Al-4V-ELI, Advance Manufacturing Research Group i, Universiti Kebangsaan Malaysia, Seremban, Malaysia. 8

9 7. Gusri, A.I. 2008, Taguchi s statistical analysis in turning parameters for tool life, The 3 th Scientific Conference of Persatuan Pelajar Indonesia, Universiti Kebangsaan Malaysia, pp Nagi Elmaghrabi, Che Hassan, C.H., Jaharah, Gusri, A.I., A.G., Yanuar, B., A. Yasir, 2008, Performance of CVD coated carbides under dry cutting of Ti-6Al-4V, Advance Manufacturing Research Group i, Universiti Kebangsaan Malaysia, Seremban, Malaysia. 9. G.A.Ibrahim, C.H.Che Haron and J.A. Ghani 2006, Pelarikan Ti-64 ELI menggunakan perkakas karbida bersalut dan tidak bersalut, Seminar Penyelidikan Siswazah Fakulti Kejuruteraan, Universiti Kebangsaan Malaysia, Bangi, Kuala Lumpur. 10. G.A.Ibrahim 2005, Improving tool life by coating multi-layers TiN-TiCN-TiAlN using sputtering DC method, The 1 st Scientific Conference Persatuan Pelajar Indonesia, Universiti Kebangsaan Malaysia, Kuala Lumpur, pp I graduated PhD from National University of Malaysia in The topic of my research is machining process in aerospace materials (titanium and inconel) involves performance of tool, wear mechanism, surface integrity, metal removal rate, chip forming and numerical method. I hereby certified that all information above are truth and can be verified. July 4 th, 2011 Signed by: Gusri Akhyar Ibrahim, ST. MT. PhD. 9