ENGINEERING PRODUCTS Sl. No. Export Item Quantity Import Item Qty. Allowed

Transcription

1 ENGINEERING PRODUCTS Sl. No. Export Item Quantity Import Item Qty. Allowed C1 C2 All Aluminium Conductor (Bare) Aluminium Alloy extruded Products including Rods and Bars 1 MT 1 Aluminium Wire Rod Aluminium Ingot / Billets 1.01 MT 1.04 MT. 1 kg 1 Aluminium Alloy Billets 1.a) Aluminium Ingots/ T Bars/Sows a) Aluminium Scrap 1.01 kg kg 1.04 kg b) Copper Scrap 1.05 kg c) Silicon 1.05 kg d) Zinc Scrap 1.05 kg e) Manganese 1.05 kg f) Any other Metal - X 1.05 kg 2 Powder for Coating 0.02 kg/kg content in 3 Tool & Die Steel 4% of FOB Value Note: 1 The quantity allowed above is per kg. net content of the material in. The actual composition should be furnished by the applicant. Note: 2. In case, the item of export is Anodised, an additional item " Stannous 1.04 kg/kg net content of the material in will be allowed. Note: 3. Powder for coating shall be allowed only if is powder coated. C3 Aluminium Alloy Ingots. 1 kg 1 Aluminium Scrap 1.03 kg Aluminium Ingot 1.01 kg 2 Copper Scrap 1.05 kg 3 Silicon 1.05 kg 4 Zinc scrap 1.05 kg 5 Manganese 1.05 kg 6 Any other metal - X 1.05 kg 7 Magnesium 1.05 kg Note: 1 The Quantity allowed above is per kg net content of the material in. The actual composition should be furnished by the applicant. C4 Aluminium artware 1 kg 1 Aluminium Scrap kg C5 Aluminium Circles/Slugs 1 kg 1 Aluminium Ingots with minium 1.10 kg Purity of 99.5% Aluminium Scrap 1.13 kg C6 Aluminium Collapsible Tubes with or without Plastic Cap 1 kg 1 Aluminium Slug kg C7 Aluminium Conductor Steel Reinforced (ACSR) 1 km 1 Aluminium Wire Rod C kg/kg content in Aluminium Ingot / Billets 1.04 kg/kg content in 2 a) High Carbon Steel Wire/Rod 1.02 kg/kg content in b) Zinc 4% of weight of Steel

2 2 Galvanized High Carbon Steel Wire content 1.02 kg/kg content in Note:1. The will indicate the weight of different items per kilometer.note : The above item at Sl. No. 4 is allowed as an alternate item to item No. 2 & 3. C8 C9 C10 C11 C12 Aluminium Conductor XLPE Insulated, GI/Copper Wire Armoured, PVC Sheathed Cable for 600/1000 Volts - 2 x 25 sq. mm Aluminium Conduit Bodies made of Aluminium and other alloying constituents Aluminium Extrusions/ Aluminium Profiles Aluminium Flexible Tubing Aluminium Foil commercial grade embosed/non embosed, cut to shape, performed, with /without coating with/without printing, with/without reinforcing material 1 km 1 Aluminium rods (EC Grade) or kgs Aluminum Ingots 2 XLPE Compound kgs 3 PVC Resin kgs 1 kg 1 Aluminium Ingot kg/kg content in export 1 MT 1 Aluminium Scrap 1.05 MT 1 kg 1 Aluminium Ingots 1.05 kg 1 kg 1 a) Aluminium foil stock temper soft kg or hard in coils or reels b) Polyester, copolymer & kg polythylene food grade granules c) Solvent soluble Dyestuff kg d) Synthetic Resin kg e) Adhesives Aluminium foil Reel/Coils kg 1.15Kg. Import item No. 1 (c) shall be permitted only when ed is printed.import item Nos. 1(b), 1(d) & 1(c) shall be allowed only when is with reinforcing material. C13 C14 C15 C16 Aluminium Foil paper backed Aluminium Foil plastic coated/ laminated Aluminium Foil printed Aluminium Foil- Synthetic Resin/ Lacquer 1 Kg 1 Aluminium Foilstock 1.10 Kg/Kg of Aluminium content in export. 1 Aluminium Ingot 1.20 Kg/Kg of Aluminium content in export 2 Relevant paper 1.05 Kg/Kg of paper content in export. 1 Kg 1 Aluminium Foilstock Kg 1 Aluminium Ingot 1.07 Kg 2 Polyester Co-polymer 0.17 Kg 3 Synthetic Resin Kg 4 Adhesives Kg 1 Kg 1 Aluminium Foilstock 1.10 Kg 1 Aluminium Ingot 1.02 Kg 2 Dyestuff Kg 1 Kg 1 Aluminium Foilstock Kg 1 Aluminium Ingot Kg C2

3 C17 C18 C19 C20 coated printed 2 Resin Kg 3 Dyestuff Kg Aluminium Foil- 1 Kg 1 Aluminium Foil Stock Kg Synthetic Resin/Lacquer coated 1 Aluminium Ingot Kg Aluminium Foil plain 1 Kg 1 Aluminium Foilstock 1.10 Kgs 1 Aluminium Ingot 1.20 Kg Aluminium Helicalformed fittings Aluminium Pencil Sharpner 1 kg 1 Aluminium Ingot Aluminium Scrap 1 No. 1 Aluminium Ingot C kgs kgs Kg/Kg weight of Aluminium content in the export product 1 Aluminium Scrap 1.06 Kg/Kg wt. of Aluminium content in 2 Steel blades for pencil sharpner Net to Net 2 High Carbon Steel Strips 1.10 Kg/Kg wt. of Steel content in 3 Brass Scrap Kg/Kg of the brass content in the C21 Aluminium rivets 1 kg. 1 Aluminium wire kg C22 C23 Table, Kitchen and other house hold articles made of aluminium including anodized with or without handle irrespective of what material handle are made of (other than those covered under SION at 1 kg 1 Aluminium Scrap 1.22 Kg/Kg content of Aluminium in. 2 Aluminium Ingot 1.18 Kg/Kg content of Aluminium in. 3 Aluminium Sheet/Coils 1.15 Kg/Kg content of Aluminium in. Sl.No. C-1749) 4 Aluminium Circle 1.07 Kg/Kg content of Aluminium in. Aluminium Utensils with Interior PTFE Coating & Exterior Coating Material as Silicon and or PTFE base (Non stick) with/without handle. 1 kg 1 Aluminium Scrap 1.15 kg/kg content of Aluminium in the. 1 Aluminium Ingots 1.10 kg/kg content of Aluminium in the. 2 PTFE Non-Stick coating material Ltr/Sq. Mtr of internal coating area 3 High Temp. Resistance Coating material as Silicon and/or PTFE Base Ltr/Sq. Mtr of external coating area 4 Bakelite Moulding Powder 1.05 kg/kg content in Note : 1. Item No. 4 to be allowed only if exported with handle. 2. Item No. 3 will be allowed only if is painted. C24 Aluminium Wire Rod 1 kg 1 Aluminium Ingot in the form of 1.03 kgs. Pigs/Sows/Slabs C25 Cable Needle 1 kg 1 Aluminium Rod/Wire 1.05 kg/kg content in

4 C26 C27 C28 C29 C30 C31 (Aluminium) Crochet Hook (Aluminium) Aluminium/Aluminium Alloy Cast Articles Including Parts & Components Re-Rollable Aluminium Strips/Coils Rolled Aluminium Plates, Sheets, Strips including Corrugated aluminium sheets/ strips Stitch holders (Aluminium) B.B. Cup set of 3 (Weight 100 gms) C32 Ball Racer cone 1 kg of Content of Import Item C33 Ball Racer set of 3 (Weight: 42 gms for item 1 ) C4. 1 kg 1 Aluminium Rod/Wire 1.05 kg/kg content in. 1 kg 1 Aluminium scrap Aluminium Ingot 1 kg 1 Primary Aluminium in the form of pigs/sows/slabs/t-bars 1 Aluminium Scrap 0.25 kg 1 kg 1 Aluminium Scrap Primary Aluminium Ingots in the form of Pigs/Sows/Slabs/T-Bars kg/kg of Aluminium content in 1.06 kg/kg of Aluminium content in 0.80 kg kg 1.02 kg 1 kg 1 Aluminium Rod/Wire 1.05 kg/kg content in. 1 set 1 HR Sheet/ coils (seconds/defective) 195 gms 1 HR Sheets /Coil 1.60 kg 1 set 1 HR Sheet/Coil (seconds/defective) 75 gms C34 BB axle (Weight 235 gms) 1 Piece 1 M.S./ Non-alloy steel round/ rods 282 gms C35 BB Cup(Set of 2) (Weight: 82 gms for item 1 ) C36 BB Ring (Weight: 18 gms for item 1 ) C37 BB set of 7 for one piece crank (Weight 216 gms) C38 BB set of 9 for one piece crank (Weight 292 gms) C39 BB Shell (Weight: 247 gms for item 1 ) C40 Bicycle Bell (Weight: 178 gms for item 1, 16 gms C41 1 set 1 CRCA/HR Sheets/Coils (Seconds/defective) 1 piece 1 HR Sheet/Coil (seconds/defective) 1 set 1 CRCA/ HR/ Sheet/ coils (seconds/defective) 1 set 1 CRCA/ HR/ Sheet/ coils (seconds/defective) 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 159 gms 35 gms 421 gms 569 gms 331 gms 214 gms for item 2 ) 2 MS Rounds/Rod 19 gms Bicycle Mirror (Weight: 1 piece 1 CRCA/HR Sheet/Coil 44 gms 34 gms for item 1, 57 gms (seconds/defective) for item 2, 66 gms for 2 MS Rounds/Rod 60 gms item 3 ) 3 Plastic/Polystrene 69 gms C42 Bicycle Stand (Weight: 1 piece 1 CRCA/HR Sheet/Coil 1317 gms 1013 gms for item 1, 76 (seconds/defective) gms for item 2 ) 2 MS Rounds/Rod 82 gms C43 Bicyle Side Stand 1 piece 1 CRCA/HR Sheet/Coil 305 gms

5 (Weight: 231 gms for item 1, 242 gms for item 2 ) C44 Brake set (Weight: 539 gms for item 1, 59 gms for item 2, 70 gms for item 3) C45 Brake Shoe (Set of 2) (Weight: 22 gms for item 1, 4 gms for item 2, 35 C46 (seconds/defective) 2 MS Rounds/Rod 266 gms 1 set 1 CRCA/HR Sheet/coils (seconds/defective) C5 771 gms 2 M.S. Round/ rod 65 gms 3 a) Carbon Black 18 gms b) Synthetic Butyl Rubber 42 gms 1 pair 1 CRCA/HR Sheet/Coil 31 gms (seconds/defective) 2 MS Rounds/Rod 4 gms gms for item 3) 3 Carbon black/natural/ Synthetic rubber 36 gms Brake Stirrup (Weight: 1 set 1 CRCA/HR Sheet/Coil 182 gms 148 gms for item 1, 12 (Seconds/Defective) gms for item 2 ) 2 MS Rounds/Rod 13 gms C47 Brake Tube (Weight: 46 gms for item 1, 10 gms C48 C49 1 set 1 CRCA/HR Sheet/Coil (seconds/defective) 54 gms for item 2 ) 2 MS Rounds/Rod 11 gms Bridge Clip for mudguard (Weight: 19 gms for item 1 ) Caliper Brake set (Weight: 523 gms for item 1, 308 gms for item 2, 64 gms for item 3 and 44 gms for item 4) C50 Carrier (Weight: 1136 gms for item 1, 53 gms C51 1 piece 1 CRCA/HR Sheet/Coil (Seconds/defective) 24 gms 1 Set 1 CRCA/HR Sheet/Coil (seconds/defective) 1004 gms. 2 MS/Non-alloy Steel Rounds/Rod 370 gms. 3 Polypropylene 67 gms. 4 Carbon black/natural/synthetic rubber 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 45 gms gms for item 2 ) 2 MS Rounds/Rod 55 gms Chain Adjuster (Weight: 1 pair 1 CRCA/HR Sheet/Coil 7 gms 6 gms for item 1, 21 gms (seconds/defective) for item 2) 2 MS Rounds/Rod 23 gms C52 Chain Guard(Steel) (Weight: 90 gms for item 1 ) C53 Chain Stay (Weight: 350 gms for item 1 ) C54 Chain(110 Links) (Weight: 334 gms for 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 149 gms 382 gms 444 gms item 1, 81 gms for item 2) 2 MS/Non-alloy Steel Rounds/Rod 95 gms Note : 1. In case of chains exported with lesser or higher links than 110 links, weight of export/import items to be reduced/increased proportionately. C55 Chainwheel & Crank (Weight: 352 gms for item 1, 722 gms for item 1 set 1 CRCA/HR Sheet/Coil (seconds/defective) 686 gms. 2 MS/Non-alloy Steel Rounds/Rod 1061 gms 2, 73 gms for item 3) 3 When cranks are plastic coated :Polypropylene C56 Chainwheel (Weight: piece 1 CRCA/HR Sheet/Coil (seconds/defective) 77 gms 686 gms

6 C57 gms for item 1 ) Complete Bicycle without accessories and with Tyres and Tubes-22" and 24" Frame (Net weight 17 kg) 1 No. 1 HR/CRCA Sections/ defective/sheets/ plates/coils/ strips C kgs 2 MS Rounds/Non Alloy Steel 3.69 kgs Rounds/bars/ wire rods 3 Brass scrap 0.34 kg 4 Unwrought Zinc for galvanising & plating 0.04 kg 5 Nickel Cathodes / Ingots / Pellets kg 6 Synthetic butyl rubber for rubber parts 7 Polypropylene/ Polystyrene/ PVC compound for components 7.a)Polyol b)isocynate 8 Other inputs for tyres and tubes Tyre & Tube (in pair) 0.06 kg 0.40 kg kg kg As indicated in the detailed list of norms. 9 Components: (i)any component from the component list when imported will be allowed on net to net basis. However, entitlement of raw materials used for manufacture of the components will be deducted from thecumulative list of raw materials indicated as above.(ii)any combination of the following components on net to net basis for bicycles with special features. Net to net a) Deraillers system b) Coaster Hub Brake c) Dynamo with head and/ or tail light d) Reflectors e) Decals f) One piece crank Note: 1. Entitlement of inputs for complete bicycle having lower weight will be worked out on prorata basis. Normally, bicycle having weights above 17 kg are not exported. However if weight of Bycycle exceeds by 10% i.e. upto kg the same may also be considered by the RLA on pro-rata basis.2. If the bicycle is exported with moulded P.U. Saddle, the import of Polyol & isocynate to the extent of 100 gms and 66 gms respectively per Saddle shall be permitted. Correspondingly, the quantity of the input at Sl.No. 7 viz. PVC Compound/ Polypropylene/ Polystyrene shall be reduced by 158 gms. The description of resultant product shall be accordingly amended to read as "Bicycle with P.U. Saddle". C58 Cotter Pin - Set of 2 (Weight: 3 gms for item 1 pair 1 CRCA/HR Sheet/Coil (seconds/defective) 4 gms 1, 40 gms for item 2) 2 MS Rounds/Rod 44 gms C59 Derailleur(Front) 1 piece 1 CRCA/HR Sheet/Coil 245 gms (Weight: 117 gms for (seconds/defective) item 1, 26 gms for item 2) 2 MS Rounds/Rod 38 gms C60 Derailleur(Rear) 1 piece 1 CRCA/HR Sheet/Coil 621 gms (seconds/defective)

7 C61 (Weight: 296 gms for item 1, 65 gms for item 2) Double Chain wheel & Crank (Weight:675 gms for item 1, 710 gms for 2 MS Rounds/Rod 95 gms 1 set 1 CRCA/HR Sheet/Coil (Seconds/defective) C gms 2 MS/Non-alloy Steel Rounds/Rod 1044 gms item 2, 73 gms for item 3) 3 When cranks are plastic coated: Polypropylene C62 Expander Bolt (Weight: 7 gms for item 1, 88 gms 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 77 gms 8 gms for item 2 ) 2 MS Rounds/Rod 123 gms C63 Fork (Weight: 1061 gms ) 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) C64 Fork Crown Cover (Weight: 16 gms for item 1 ) C65 Fork Fitting (Weight: 108 gms for item 1, 20 gms C66 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 1 Set 1 CRCA/HR Sheets/Coils (seconds/defective) 1263 gms 21 gms 259 gms for item 2) 2 MS Rounds/Rod 44 gms Fork Guard (Pair) 1 pair 1 CRCA/HR Sheet/Coil 89 gms (Weight: 77 gms for item (seconds/defective) 1, 652 gms for item 2 ) 2 MS Rounds/Rod 717 gms C67 Fork Guard Clamp (Weight: 77 gms for item 1 ) C68 Frame (Weight: 3000 gms ) C69 Frame Cup Set of 2 (Weight: 39 gms for item 1 ) C70 Frame Lock (Weight: 143 gms for item 1, 57 gms 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 1 Set 1 CRCA/HR Sheet/Coil (Seconds/defective) 1 set 1 CRCA/HR Sheet/Coil (seconds/defective) 1 piece 1 CRCA/HR Sheet/Coil (Seconds/defective) 89 gms 3450 gms 47 gms 185 gms for item 2 ) 2 MS Rounds/Rod 63 gms C71 Frame Lugs Set of 3 (Weight: 212 gms for item 1 ) C72 Frame Pipe Set of 4 (Weight: 1398 gms for item 1 ) C73 Frame Top Bar Pipe (Weight: 310 gms for item 1 ) C74 Free Wheel (single speed) (Weight: 108 gms for 1 set 1 CRCA/HR Sheet/Coil (seconds/defective) 1 set 1 CRCA/HR Sheet/Coil (seconds/defective) 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 1 piece 1 CRCA/HR Sheets/Coils (seconds/defective) 262 gms 1482 gms 332 gms 259 gms item 1, 99 gms for item 2) 2 MS/Non-alloy Steel Rounds/Rod 160 gms C75 Front/ Back Mudguard 1 kg 1 M.S. CRCA sheet/ coil/ strip 1.10 kg including seconds/ defectives but excluding coated C76 Full Chain Cover 1 piece 1 CRCA/HR Sheet/Coil 1108 gms (Weight: 924 gms for (seconds/defective) item 1, 4 gms for item 2 ) 2 MS Rounds/Rod 5 gms C77 Half Chain Cover 1 piece 1 CRCA/HR Sheet/Coil 641 gms

8 (Weight: 501 gms for (seconds/defective) item 1, 4 gms for item 2 ) 2 MS Rounds/Rod 5 gms C78 Handle Bar (Weight: 869 gms for item 1, 594 gms for item 2, 40 gms for C79 C80 C81 1 Set 1 CRCA/HR Sheet/Coil 1156 gms (seconds/defective) 2 MS Rounds/Rod 642 gms item 3) 3 Polystyrene/PVC 42 gms Handle Lever(pair) (Weight: 328 gms for item 1 ) Handle Stem (Weight: 278 gms for item 1, 88 1 pair 1 MS Rounds/Rod 344 gms 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) C8 341 gms gms for item 2 ) 2 MS Rounds/Rod 100 gms Hub Axle(Front) 1 piece 1 MS/Non-alloy Steel Rounds/Rod 102 gms (Weight: 85 gms for item 1 ) C82 Hub Axle(Rear) (Weight: 126 gms for item 1 ) C83 Hub Cone( Rear) (Weight: 16 gms for item 1 ) C84 Hub Cone(Front) (Weight: 12 gms for item 1 ) C85 Hub Cup ( Rear) (Weight: 28 gms for item 1 ) C86 Hub Cup (Front) (Weight: 20 gms for item 1 ) C87 Hub(Front) (Weight: 88 gms for item 1, 85 gms 1 piece 1 MS/Non-alloy Steel Rounds/Rod 151 gms 1 pair 1 MS/Non-alloy Steel Rounds/Rod 22 gms 1 pair 1 MS/Non-alloy Steel Rounds/Rod 16 gms 1 pair 1 CRCA/HR Sheet/Coil (seconds/defective) 1 pair 1 CRCA/HR Sheet/Coil (seconds/defective) 1 Piece 1 CRCA/HR Sheet/Coil (seconds/defective) 39 gms 28 gms 114 gms for item 2) 2 MS/Non-alloy Steel Rounds/Rod 120 gms C88 Hub(Rear) (Weight: 229 gms for item 1, 126 gms C89 C90 C91 C92 C93 1 Piece 1 CRCA/HR Sheet/Coil (seconds/defective) 297 gms for item 2) 2 MS/Non-alloy Steel Rounds/Rod 293 gms Lamp Bracket (Weight: 67 gms for item 1 ) Mudguard(pair) (Weight: 933 gms for item 1, Piece 1 CRCA/HR Sheet/Coil (seconds/defective) 1 pair 1 CRCA/HR Sheet/Coil (seconds/defective) 96 gms 1026 gms gms for item 2) 2 MS Rounds/Rod 258 gms Multispeed Free Wheel (Weight: 397 gms for item 1, 119 gms for item 2) One Piece Crank (Weight: 860 gms for item 1 ) Paddle Pair made out of Polypropylene (Net 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 913 gms 2 MS/Non-alloy Steel Rounds/Rod 309 gms 1 piece 1 MS/Non-alloy Steel Rounds/Rod 1358 gms 1 Pair 1 Non Alloy Steel Bar/Round for Axle 350 gms weight 450 gms per pair) 2 MS Defective Sheet/Coil for 31.5 gms

9 C9 Washer 3 Polypropylene 98 gms 4 Acrylic Reflectors 4 Nos./Padle Pair weighing 19 gms Note : 1. In case the net weight of the PP Bicycle Paddle is varying, the inputs will be worked out on prorata basis. C94 Pedal Axle (Weight: 2 gms for item 1, 88 gms 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 3 gms for item 2 ) 2 MS/Non-alloy Steel Rounds/Rod 107 gms 1 piece 1 MS/Non-alloy Steel Rounds/Rod 5 gms C95 Pedal Cone (Weight: 4 gms for item 1 ) C96 Pedal Cup (Pair) (Weight: 20 gms for item 1 ) C97 Pedal Plate (2 pieces) (Weight: 26 gms for item 1 ) C98 Pedal Stretcher Bar (2 pieces) (Weight: 27 gms for item 1 ) C99 Pedal Tube (Weight: 17 gms for item 1 ) C100 Pedal(pair) (Weight: 165 gms for item 1, 274 gms for item 2, 290 gms for C101 C102 C103 1 pair 1 CRCA/HR Sheet/Coil (seconds/defective) 1 set 1 CRCA/HR Sheet/Coil (seconds/defective) 23 gms 30 gms 1 set 1 MS Rounds/Rod 28 gms 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 18 gms 1 pair 1 CRCA/HR Sheet/Coil (seconds/defective) 214 gms 2 MS/Non-alloy Steel Rounds/Rod 383 gms item 3) 3 Carbon black/ natural/synthetic rubber Plastic Chain guard (Weight: 29 gms for item 1 ) Pump (Weight: 254 gms for item 1, 12 gms for 295 gms 1 piece 1 Polypropylene 30 gms 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 279 gms item 2 ) 2 MS Rounds/Rod 13 gms Quarter Chain Cover 1 piece 1 CRCA/HR Sheet/Coil 315 gms (Weight: 284 gms for (seconds/defective) item 1, 4 gms for item 2 ) 2 MS Rounds/Rod 5 gms C104 Rim(pair) (Weight: 2233 gms for item 1 ) C105 Saddle (Weight: 400 gms for item 1, 841 gms for item 2, 150 gms for item 3) 1 pair 1 CRCA/HR Sheet/Coil (seconds/defective) 2568 gms 1 piece 1 CRCA/HR Sheet/Coil 456 gms (seconds/defective) 2 MS Rounds/Rod 1093 gms 3 PVC Compound 3.(a) Polyol (b) Isocyanate 158 gms 100 gms 66 gms 1 a) Panel 112 Nos b) Funnel 112 Nos Note: If is of moulded P.U. Saddle, the import of Polyol and Isocyanate as indicated shall be permitted instead of P.V.C. compound C106 Saddle Nose (Weight: 30 1 piece 1 CRCA/HR Sheet/Coil 37 gms (seconds/defective)

10 gms for item 1 ) C107 Saddle Strip (Weight: 236 gms for item 1 ) C108 Saddle Wire set of 3 (Weight: 199 gms for item 1 ) C109 Screw Racer (Weight: 27 gms for item 1 ) C110 Seat Axle (Weight: 39 gms for item 1 ) C111 Seat Clip (Weight: 142 gms for item 1 ) C112 Seat Pillar(5") (Weight: 83 gms for item 1 ) C113 Seat Plate (Weight: 145 gms for item 1 ) C114 Seat Rivet (11 pieces) (Weight: 15 gms for item 1 ) C115 Seat Stay (Weight: 171 gms for item 1 ) C116 Spanner 13 Hole (Weight: 80 gms for item 1 ) C117 Spanner Set of 3 pieces (Weight: 100 gms for item 1 ) C118 Spare Crank (Weight: 361 gms for item 1, 73 gms for item 2 ) C119 Spokes Set of 72 pieces (Weight: 31 gms for item 1, 611 gms for item 2, 105 C120 C121 C122 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) C gms 1 set 1 MS Rounds/Rod 209 gms 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 48 gms 1 piece 1 MS Rounds/Rod 43 gms 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 156 gms 89 gms 197 gms 1 set 1 MS Rounds/Rod 17 gms 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 1 piece 1 CRCA/HR Sheet/Coil (seconds/defective) 1 Set 1 CRCA/HR Sheet/Coil (seconds/defective) 186 gms 158 gms 167 gms 1 piece 1 MS/Non-alloy Steel Rounds/Rod 531 gms 2 When Cranks are Plastic Coated:Polypropylene 1 Set 1 CRCA/HR Sheet/Coil (seconds/defective) 77 gms 43 gms 2 MS/Non-alloy Steel Rounds/Rod 672 gms gms for item 3) 3 Brass 113 gms Steel Balls (Set for complete bicycle) (Weight: 56 gms for item 1 ) Steel Pedal(pair) (Weight: 308 gms for item 1, 200 gms for item 2 ) Triple Chain wheel & Crank set (Weight: 764 gms for item 1, 760 gms for item 2, 73 gms for item 3) 1 Set 1 MS/Non-alloy Steel Rounds/Rod 69 gms 1 pair 1 CRCA/HR Sheet/Coil (seconds/defective) 440 gms 2 MS/Non-alloy Steel Rounds/Rod 280 gms 1 set 1 CRCA/HR Sheet/Coil (seconds/defective) 1428 gms 2 MS/Non-alloy Steel Rounds/Rod 1117 gms 3 When cranks are plastic coated: Polypropylene 77 gms Note:1. Entitlement of inputs will be calculated on the basis of net weight of different inputs in the export product. Ratio of inputs will be as per above standard input output norms. 2. In case of bicycle productsto be Nickel Plated, the Nickel will be allowed at the rate of 1% of the net

11 weight of the steel to be Nickel Plated. 3. Zinc will be allowed at the rate of 3% of the net weight of the parts to be galvanised. 4. Paints, preparationchemicals and thinner will be allowed at the rate of 1.08% of the net weight of the parts to be painted. 5. Plating salts will be allowed at the rate of 2% of the net weight of the parts to be plated. 6. Packing Material will be allowed as per the packing policy. 7. However if weight of Bicycle components exceeds by 10%, the same may also be considered by RLA on pro-rata basis. This note is applicable to SIONs at Sr. Nos. C-31 to C-56, C-58 to C-92 and C-94 to C In all the above s, the net weight of different items as per the above standard norms shall be indicated alongwith the export obligation to be imposed. C123 C124 C KV Heat Shrinkable Dry type indoor termination for Switch gear with line in Boot for XLPE cable 240 mm. sq. 11 KV Heat Shrinkable Dry Type Indoor Termination for Switchgear with in line Boot for XLPE Cable 185sq mm. 11 KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 185 mm. sq. 1 No. 1 Hot melt adhesive 375 gms 2 Electrolytic grade copper 99.9% 725 gms purity in Rod/Tube form 3 Self amalgamating EPR 6 mtrs Insulating Tape 4 Heat Shrinkable Medium Wall 255 mm tubing size 140/42 mm 5 Anti Tracking Heat Shrinkable 1.9 mtr whether insulation tubing size 42/19 mm 6 Heat Shrinkable Stress control 800 mm tubing size 45/20 mm 7 Heat Shrinkable (small Size) Anti tracking wheather resistant tubing size 95/45 mm 1 Mtr. 8 Anti tracking wheathering 1 No. resistance 3 - way breakout/ trifurcating gloves for HV Termination (Large size ) HS 1 No 1 Hot Melt Adhesive 370 gms 2 Electrolytic grade copper 99.9% 600 gms. purity in Rod/Tube form 3 Self Amalgamating EPR 6 Mtrs. Insulating tape 4 Heat Shrinkable medium wall 250 mm tubing size 115/34 mm 5 Heat Shrinkable anti tracking 1.7 Mtrs. insulating tubing size 42/19 mm 6 Anti Tracking Weathering 1 No. resistance 3 way breakout trifurcating gloves for HV terminations 7 Heat Shrinkable Stress control 800 mm tubing size 20/45 8 Heat Shrinkable Conduting 600 mm Tubing size 24/65 mm 1 No 1 Hot Melt Adhesive 500 gms 2 Electrolytic grade copper gms purity in Rod/ tube form 3 Self Amalgamating EPR 6 Mtrs Insulating Tape 4 Anti-Tracking Heat shrinkable 3 Mtrs Anti-tracking Insulating Tubing size 42/19 mm 5 Heat Shrinkable stress control 800 mm Tubing size 45/20 mm. C11

12 C126 C127 C128 C KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 95 mm. sq. 11 KV Heat Shrinkable Straight through joints suitable for 3 x sq. mm 11 KV Heat Shrinkable Straight Through Joints for XLPE Copper Cable size 3 x 240 sq. mm. 11 KV Heat Shrinkable Transition joints suitable for connecting 240 sq.mm XLPE to 300 sq.mm PILC cable & 185 sq.mm XLPE cable with 300 sq.mm PILC Cables 1 No 1 Hot Melt Adhesive 500 mm 2 Electrolytic Grade copper 99.9 purity in Rod/Tube form 3 Self Amalgamating EPR Insulating Tape 870 mm 4 mtrs. 4 Anti Tracking Wethering 3 way 1 No breakout / trifurcating Gloves for HV Terminations (Large size) HS 5 Heat shrinkable medium wall 255 mm tubing size 95/25 mm 6 Heat shrinkable Anti-tracking Insulating Tubing 32/14 mm 3 mtrs. 7 Heat shrinkable stress control 800 mm tubing size 15/30 mm 1 No. 1 Heat Shrinkable Breakout 2 Nos 2 Heat Shrinkable Stress control 3 Mtrs Tubing 3 Mastic Compound Tape (Anti kgs Tracking) 4 Spacer Tape 4.0 Mtrs. 5 Stress Control Mastic Tape 4.8 Mtrs. 6 Heat Shrinkable Thin Wall 3.20 Mtrs Tubing 7 Heat Shrinkable Medium Wall 1.80 Mtrs. Tubing 8 Heat Shrinkable Conducting Tubing 3.0 Mtrs. 9 Heat Shrinkable Anti Tracking 3.28 Mtrs. Tubing 1 No 1 Hot melt adhesive 500 gms 2 Electroiytic grade copper gms purity in Rod/Tube form 3 Self Amolgamating EPR 10 mtr Insulating tape 4 Heat shrinkable medium wall 1995 mm. tubing size 140/42mm 5 Heat shrinkable Stress cantrol 3 Mtr tubing size 20/45 mm 6 Heat Shrinkable conducting 3 Mtr tubing 95/45 mm 7 Heat Shrinkable Anti tracking 3 Mtr Insulation tubing size 42/19 mm 1 No. 1 Heat Shrinkable Breakout 2 Nos. 2 Heat Shrinkable Stress Control 2.60 Mtrs. Tubing 3 Mastic Compound Tape (Anti kgs Tracking) 4 Spacer Tape 4.0 Mtrs. 5 Stress Control Mastic Tape 3.83 Mtrs. 6 Heat Shrinkable Thin Wall Tubing 7 Heat Shrinkable Medium Wall Tubing 3.23 Mtrs Mtrs. C12

13 C130 C131 C132 C KV mass impregnated, paper insulated, lead alloy sheathed steel tape armoured Aluminium conductor conforming to IS:692/ sq.mm 3 Core 11 KV mass impregnated, paper insulated, lead Alloy sheathed steel tape armoured Aluminium conductor conforming to IS:692/ sq.mm 3Core 11 KV Straight Through Joints for XLPE Copper Cable size 3 x 95 Sq. mm. 11 KV, Indoor Vacuum circuit Breaker Panels C134 Deleted C135 19/33 KV 3 Core X 400 sq.mm.aluminium conductor XLPE insulated, steel wire armoured, PVC Sheathed cable conforming to IS: 7098/II/ sq.mm.3 Core C136 Deleted C KV Insulator as per IS Heat Shrinkable Conducting Tubing 9 Heat Shrinkable Anti Tracking Tubing 1000 Mtrs. 1 EC Grade Aluminium Bars/Rods/Ingots. C Mtrs. 3.0 Mtrs kgs. 2 Cable insulating paper kgs. 3 Cable impregnating compound kgs. 4 Lead kgs Mtrs. 1 EC Grade Aluminium Bars/Rods/Ingots kgs. 2 Cable Insulating Paper kgs. 3 Cable impregnating compound kgs. 4 Lead 2947 kgs. 1 No 1 Hot Melt Adhesive 500 gms 2 Electrolytic Grade copper 99.9% purity in Rod/Tube form 3 Self amalgamating EPR insulating Tape 4 Heat shrinkable medium wall tubing size 115/34 5 Heat shrinkable stress control tubing size 20/45 mm 6 Heat shrinkable stress control tubing 15/30 mm 7 Heat shrinkable Anti-Tracking weathering Insulating Tubing size 42/19 mm 8 Heat shrinkable contucting tubing size 16/38 mm 860 gms 10 mtrs 1995 mm 3 mtrs 3 mtrs 2.25 mtrs 2 mtrs 1 No. 1 Vaccum Interruptor 3 Nos. 2 Contact Strips and Rings 3 Nos. 3 Bearing HFL No. 4 Bearing HF No. 5 Bearing HK No Mtrs. 1 EC Grade Aluminium Bars/Rods/Ingots. 1 No. (4.70 kgs Approx) kgs. 2 XLPE Compound (Semi kgs. Conducting and Insulating Grade) 3 PVC Resin kgs. 4 Firrat Tape(semi-conducting swellable tape) kgs. 1 Epoxy Resin (Liquid) kg 2 Hexa Hydro Phthalic Anhydride kg

14 C138 C139 C140 C141 C142 C W Twin Tube Box Type Industrial Fitting duly Pre wired with Vaccum Pressure impregnated copper wound open type Ballast, Power Factor Improvement Capacitor, Starter, Starter Seat, Mains Terminal and Lamp Holders. 600/1000 V Heat shrinkable straight joints for cable size 4 X 240 mm. sq. 600/1000 V Heat shrinkable straight joints for cable size 4 X 185 mm. sq. 600/1000 V Heat shrinkable straight joints for cable size 4 X 120 mm. sq. 600/1000 V Heat shrinkable straight joints for cable size 4 X 70 mm. sq. (HHPA)(Haroner) 3 Benzyl Diethuamine kg 4 Release Agent QZ kg 1 No. 1 CRCA Sheet 2.5 kg. 2 Ballast 2 Nos. 3 Holders 4 Nos. 4 Capacitors 1 No. 5 Starter 2 Nos. 1 No. 1 Hot melt adhesive 470 gms 2 Electrolytic grade copper 99.9% 760 gms purity in Rod/Tube form 3 Self amalgamating EPR 6 Mtrs Insulating Tape 4 Heat Shrinkable Medium Wall tubing size 155/34 mm 1 length of 1700 mm 5 Heat Shrinkable Medium Wall 1200 mm tubing size 50/16 mm 1 No. 1 Hot melt adhesive 500 gms 2 Electrolytic grade copper 99.9% 630 gms purity in Rod/Tube form 3 Self amalgamating EPR 4 mtrs Insulating Tape 4 Heat Shrinkable Medium Wall 1 length of 1700 mm tubing size 115/34 mm 5 Heat Shrinkable Medium Wall 800 mm tubing size 35/12 mm 1 No. 1 Hot melt adhesive 400 gms 2 Electrolytic grade copper 99.9% 850 gms purity in Rod/Tube form 3 Self amalgamating EPR 4 mtrs Insulating Tape 4 Heat Shrinkable Medium Wall 1 length of 1500 mm tubing size 95/25 mm 5 Heat Shrinkable tubing size 750 mm 35/12 mm 1 No. 1 Hot melt adhesive 400 gms 2 Electrolytic grade copper 99.9% 690 gms purity in Rod/Tube form 3 Self amalgamating EPR 4 mtrs Insulating Tape 4 Heat Shrinkable Medium Wall 1 length of 1500 mm tubing size 75/22 mm 5 Heat Shrinkable Medium Wall 600 mm tubing size 25/8 mm 1 No 1 Hot melt adhesive 280 gms 600/1000 V Heat shrinkable straight joints 2 Electrolytic grade copper 99.9% purity in Rod/Tube form 700 gms C14

15 C144 C145 C146 C147 C148 for cable size 4 X 25 mm. sq. 600/1000 V Heat shrinkable straight joints for cable size 4 X 16 mm. sq. 600/1000 V Outdoor overhead termination complete with cable lugs & Armour clamping ring for 4 core copper cable 4 X 240 mm. sq. 600/1000 V Outdoor Overhead termination complete with cable lugs & Armour clamping ring for 4 core copper cable 4 X 120 mm. sq. 600/1000 V Outdoor Overhead termination complete with cable lugs & Armour clamping ring for 4 core copper cable 4 X 120 mm. sq. 3 Self amalgamating EPR Insulating Tape 4 Heat Shrinkable Medium Wall tubing size 63/19 mm 5 Heat Shrinkable Medium Wall tubing size 25/8 mm 4 mtrs 1060 mm 500 mm 1 No 1 Hot melt adhesive 200 gms 2 Electrolytic grade copper 99.9% purity in Rod/Tube form 3 Self amalgamating EPR Insulating Tape 550 gms 3 mtrs 4 Heat Shrinkable Medium Wall tubing size 50/16 mm 1060 mm 5 Heat Shrinkable Medium Wall 750 mm tubing size 15/6 mm 1 No. 1 Hot melt adhesive 400 gms 2 Electrolytic grade copper 99.9% 800 gms purity in Rod/Tube form 3 Self amalgamating EPR 8 mtrs. Insulating Tape 4 Heat Shrinkable Medium Wall 3375 mm tubing size 50/16 mm 5 Heat Shrinkable Medium Wall 300 mm tubing size 115/34 mm 6 Heat Shrinkable stress control 320 mm tubing size 20/45 mm 7 4-way cable breakout for LV 1 No. Termination (Medium size) 1 No. 1 Hot melt adhesive 350 gms 2 Electrolytic grade copper 99.9% 600 gms purity in Rod/Tube form 3 Self amalgamating EPR 6 mtrs. Insulating Tape 4 Heat Shrinkable Medium Wall mm tubing size 35/12 mm 5 Heat Shrinkable Medium Wall 210 mm tubing size 75/22 mm 6 Heat Shrinkable Stress control 320 mm size 15/30 mm 1 No. 1 Hot melt adhesive 350 gms 2 Electrolytic grade copper 99.9% 600 gms purity in Rod/Tube form 3 Self amalgamating EPR 6 mtrs Insulating Tape 4 Heat Shrinkable Medium Wall mm tubing size 35/12 mm 5 Heat Shrinkable Medium Wall 210 mm tubing size 75/22 mm 6 Heat Shrinkable Stress control 320 mm tubing size 15/30 mm 7 4-way cable breakout for LV 1 No termination (Large size) 1 No. 1 Hot melt adhesive 300 gms 600/1000 V Outdoor Overhead termination 2 Electrolytic grade copper 99.9% purity in Rod/Tube form 700 gms C15

16 C149 C150 C151 complete with cable lugs & Armour clamping ring for 4 core copper cable 4 X 25 mm. sq. Deleted Accessories of Electrical Measuring Instrument: Shunts Electrical Actuators for Electrical Switches C152 Adopters made of Brass Strip ( for electric lamps) C153 All Aluminium Solid single Core Conductor to BS-2627H8 in coil form C154 Aluminium Conductor #6 and #3 Duplex Phase - AC SR Neutral 3 Self amalgamating EPR Insulating Tape 4 Heat Shrinkable Medium Wall tubing size 25/8 mm 5 Anti-tracking Heat Shrinkable Medium Wall tubing size 50/16 mm 6 Heat Shrinkable Stress control tubing size 15/30 mm 7 Heat Shrinkable 4-way cable breakout for LV Termination (small size) 5 mtrs 3920 mm 210 mm 200 mm 1 No 1 No 1 Duralumin Rods, Free Cutting Net + 2% wastage Aluminium rods, Capillary Tubes 2 Copper Bars/ Strips Net + 2% wastage 3 Manganin Wire/ Rods Net + 2% wastage 4 Eureka Wire/ Rods Net + 2% wastage 1 No. 1 One or More of the following relevant synthetic resin : a) Polyester 1.05 kg/kg of the net content of the relevant item in the. b) Nylon 66 c) ABS d) Polycarbonate 1.05Kg/Kg content in. 2 Relevant Zinc Alloy Ingot 1.05 Kg/Kg content in. 3 Brass Strip 1.33Kg/Kg content in. 4 Relevant Diodes. Net to net. 5 Relevant Resistors Net to net. 6 Brass Rod 1.1 kg/kg content in 7 Silver Epoxy and Epoxy Resin CIF value of these item together shall be restricted to 1% of FOB 1 MT 1 Brass Strips of relevant gauge 1.10 MT/MT content in export 1 MT 1 Aluminium Wire Rod/Ingot 1.01 MT 1 kg 1 Aluminium Wire Rod/Ingots 1.01 kg/kg content in 2 H.C. Steel Wire Rods 1.05 kg/kg content in 3 Zinc Unwroght Unalloyed 4% of steel content in export 4 XLPE Compound 1.05 kg/kg content in C16

17 C155 C156 C157 C158 C159 Auto Transformers above KVA, 3 Phase Auto Transformers above KVA upto KVA, 1 Phase Auto Transformers above KVA upto KVA, 3 Phase Auto Transformers above KVA upto KVA, 1 Phase 1 No. 1 CRGO Steel laminations/sheets/coil 2 Copper winding wires/ strips/ wire bars/ wire rods/ cathodes 3 Transformer Oil 0.29 kgs/kva 0.16 kg/kva 0.40 kgs/kva 3 Transformer Oil Base Stock 0.44 kgs/kw 4 Phenolic Resin bonded paper kgs/kva 5 Pre Compressed Press Board 0.05 kg per KVA 6 Press Board Moulding 1 Set (Net to net) 7 Motorised Off Load/ on Load Tapchanger 1 No. 1 CRGO Steel laminations/sheets/coil 2 Copper winding wires/ strips/ wire bars/ wire rods/ cathodes 3 Transformer Oil 1 No. (Net to net) 0.43 kgs/kva 0.2 kg/kva 0.42 kgs/kva 3 Transformer Oil Base Stock 0.46 kgs/kw 4 Phenolic Resin bonded paper kgs/kva 5 Pre Compressed Press Board 0.08 kg per KVA 6 Press Board Moulding 1 Set per Job 7 Motorised Off Load/ on Load 1 No. per Job Tapchanger 1 No. 1 CRGO Steel 0.47 kgs/kva laminations/sheets/coil 2 Copper winding wires/ strips/ 0.23 kg/kva wire bars/ wire rods/ cathodes 3 Transformer Oil 0.68 kgs/kva 3 Transformer Oil Base Stock 0.75 kgs/kw 4 Phenolic Resin bonded paper kgs/kva 5 Pre Compressed Press Board 0.08 kg per KVA 6 Press Board Moulding 1 Set per Job 7 Motorised Off Load/ on Load 1 No. per Job Tapchanger 1 No. 1 CRGO Steel 0.44 kgs/kva laminations/sheets/coil 2 Copper winding wires/ strips/ kg/kva wire bars/ wire rods/ cathodes 3 Transformer Oil 0.35 kgs/kva 3 Transformer Oil Base Stock 0.39 kgs/kw 4 Phenolic Resin bonded paper kgs/kva 5 Pre Compressed Press Board 0.05 kg per KVA 6 Press Board Moulding 1 Set (Net to net) 7 Motorised Off Load/ on Load Tapchanger 1 No. (Net to net) Auto Transformers above 1 No. 1 CRGO Steel 0.37 kgs/kva KVA upto laminations/sheets/coil KVA, 3 Phase 2 Copper winding wires/ strips/ 0.2 kg/kva C17

18 C160 C161 C162 C163 C164 Electrical Wiring Accesseries/components wholly made of Brass Brass Strips for Electrical/ Electronics/ Telecommunication/ Defence application and radiators for automobile application. Cast Resin Parallel Branch joints Box suitable for 4 x 185 sq.mm main cable and two branches of 4 x 185 sq.mm, XLPE/SWA/PVC, 600/1000 V cable Cast Resin Parallel joints Box suitable for 4 x 300 sq.mm main cable and two branches of 4 x 300 sq.mm, XLPE/SWA/PVC, 600/1000 V cable Cast Resin Straight joints suitable for 4 x 185 sq.mm, XLPE /SWA/PVC, 600/1000 V cable wire bars/ wire rods/ cathodes 3 Transformer Oil 0.55 kgs/kva 3 Transformer Oil Base Stock 0.61 kgs/kw 4 Phenolic Resin bonded paper kgs/kva 5 Pre Compressed Press Board 0.05 kg per KVA 6 Press Board Moulding 1 Set (Net to net) 7 Motorised Off Load/ on Load 1 No. (Net to net) Tapchanger 1.0 kgs 1 Brass Scrap kgs 1 Kg. 1 Zinc having minimum purity 99.95% 2 Copper wire bars having 99.9% minimum purity 1.05 Kg per Kg. content in export product 1.05 Kg per Kg. content in export product 1 No. 1 Synthetic Resin (To be specified) kgs 2 Isocynate/Poly Isocynate kgs (Hardner) 3 Catalyst kg 4 High Impact Polystyrene Granules kgs 5 Ethylene Propylene Rubber (EPR kg insulating tape) 6 Mastic Sealing Tape kg 7 Thermofit Sleeve Mtrs 8 Copper wire/rod kgs 1 No. 1 Synthetic Resin (To be specified) kgs 2 Isocynate/Poly Isocynate kgs (Hardner) 3 Catalyst kg 4 High Impact Polystyrene Granules kgs 5 Ethylene Propylene Rubber (EPR kg insulating tape) 6 Mastic Sealing Tape kg 7 Thermofit Sleeve Mtrs 8 Copper wire/rod kgs 1 No. 1 Synthetic Resin (To be specified) kgs 2 Isocynate/Poly Isocynate kgs (Hardner) 3 Catalyst kg 4 High Impact Polystyrene 4.65 kgs 5 Ethylene Propylene Rubber (EPR kgs insulating tape) 6 Mastic Sealing Tape kg 7 Thermofit Sleeve Mtrs C18

19 C165 C166 C167 C168 C169 Cast Resin Straight joints suitable for 4 x 300 sq.mm, XLPE /SWA/PVC, 600/1000 V cable Cast Resin Straight through joints suitable for 4 x 70 sq.mm, XLPE /SWA/PVC, 600/1000 V cable Ceiling Exhaust Fan or Ceiling Extraction Fan Complete Ceiling fan with or without Metal Blades(36") Complete Ceiling fan with or without Metal 8 Copper wire/rod kg 1 No. 1 Synthetic Resin (To be specified) kgs 2 Isocynate/Poly Isocynate (Hardner) kgs 3 Catalyst kg 4 High Impact Polystyrene Granules 5 Ethylene Propylene Rubber (EPR insulating tape) kgs kg 6 Mastic Sealing Tape kg 7 Thermofit Sleeve Mtrs 8 Copper wire/rod kg 1 No. 1 Synthetic Resin (To be specified) 3.6 kgs 2 Isocynate/Poly Isocynate 1.22 kgs (Hardner) 3 Catalyst kgs 4 High Impact Polystyrene Granules kgs 5 Ethylene Propylene Rubber (EPR kgs insulating tape) 6 Mastic Sealing Tape kgs 7 Thermofit Sleeve Mtrs. 8 Copper wire/rod kgs 1 No. 1 Polypropylene 1.05 kg/kg content in. 2 High Impact Polystrene 1.05 kg/kg content in. 3 Lamination Steel (Electrical) 2 kg/kg content in. 4 Copper Wire/Bar/Rod 1.01 kg/kg content in. 5 Thermal Fuse Net to net. 1 No. 1 Super Enamelled Copper 320 gm Wire/Copper Wire Rod 2 CRNGO Sheet/Coils 3100 gm 3 Aluminium alloy 660 gm 4 Kraft Paper 800 gm 5 Polypropylene 130 gm 6 M.S. Sheet 200 gm 7 Ball bearing/ Bush 2 Nos 8 Capacitor Net to net. 9 Aluminium Sheet/CRCA Sheet (for Blades of Fan) (only the relevant item used in the export to be allowed) 1 No. 1 Super Enamelled Copper Wire/Copper Rod blades 48" 2 CRNGO Sheet/ Coils Electric Stamping made out of CRNGO Sheet kg/kg content in. 360 gm 3400 gm 1400gms. C19

20 C170 C171 Complete Ceiling fan with or without Metal Blades(42") Complete Ceiling fan (56") with or without Metal Blades and regulator 3 Aluminium alloy 1100 gm 4 Kraft Paper 1000 gm 5 Polypropylene 150 gm 6 M.S. Sheet 250 gm 7 Ball bearing/ Bush 2 Nos. 8 Aluminium Sheet/CRCA Sheet/Aluminium Alloy (for 1.05Kg/Kg content in. Blades of Fan) ( only the relevant item used in the export to be allowed). 1 No. 1 Super Enamelled Copper 320 gm Wire/Copper Wire Rod 2 CRNGO Sheet/ Coils 3100 gm 3 Aluminium alloy 660 gm 4 Kraft Paper 800 gm 5 Polypropylene 130 gm 6 M.S. Sheet 200 gm 7 Ball bearing/bush 2 Nos. 1 No. 1 Super Enamelled Copper Wire/Copper Rod 2 CRNGO Sheets/ Coils Electric Stamping made out of CRNGO Sheets C gm 3600 gm 1500 gms. 3 Aluminium Alloy 1200 gm 4 Kraft Paper 1000 gm 5 Polypropylene 150 gm 6 M.S. Sheet 250 gm 7 Ball bearing/bush 2 Nos. 8 Capacitor Net to net. 9 Aluminium Sheet/CRCA Sheet/Aluminium Alloy (for Blades and False Cover of Fan) (Only the relevant item used in the export to be allowed) [to be permitted only in such cases where Blades/False Cover are also required to be exported alongwith ] 10 Regulator [to be allowed only in such cases where the same is required to be exported alongwith ] 1.05 kg/kg content in. 11 MS/GI Pipe 1.02 Metre/Metre content in export product. 12 MS Bright Bar 1.05 kg/kg content in. Note: 1. Norms covered by Sl.No. 168 to 171 above will also be applicable to shipment of products in SKD condition provided the exporter submit necessary proof of export of complete ceiling fans covered by various shipping bills at the time of closure of DEEC Book/Redemption of Bond / LUT. C172 Aluminium / Copper Conductor, XLPE 1 km 1 Copper Wire Bar/ CC Rod (EC Grade) 1 No. *

21 Insulated, GI/Single Wire Armoured, PVC Sheathed Cable for 600/1000 Vof various sizes as given in Engg. Table No. 10 C21 1 Aluminium Ingots * 2 XLPE Compound * 3 PVC Compound 3 a) PVC Resin 60% of PVC Compound allowed in Engg. Table No. 10 b) Plastisizer 30% of PVC Compound allowed in Engg. Table No. 10 c) Filler 10% of PVC Compound allowed in Engg. Table No. 10 * Note: 1. The quantity of these items will be as per the Engineering Table No. 10 given at the end of this product group. C173 Deleted C174 Deleted C175 Deleted C176 CR/AL Thermo-couples 1 No. 1 Recrystalised Alumina Sheath Net to Net C177 C178 Current Transformers above 245 KV (Outdoor Type)(Containing 275 kg of item 1, 280 kg of item 2, 150 kg of item 3, 400 & 150 kg of item 5 and 450 or 540 Ltr. of item 6) Current Transformers above 0.66 KV upto & including 12.5 KV (Indoor Type)(Containing 6.50 kg of item 1, 7 kg of item 2, 0.20 kg of item 3, 3 kg of item 4 and 5 kg of item 5) 1 No. 1 CRGO Steel Laminations/ kgs Sheets/ Coils with insulating coating of inorganic/ organic material 1 Nickel Iron Magnetic Strips/ kgs Sheets/ Coils 2 Copper Winding Wires/ Strips/Wire Bars/ Wire Rods/ Cathodes kgs 3 Electrical Grade Insulating Paper 165 kgs 4 Porcelain Insulator 1 No. 5 Mild Steel Sheets/ Coils 440 kgs 5 Aluminium Sheets/ Plates/ Ingots kgs 6 Transformer Oil Litres 6 Transformer Oil Base Stock 567 Litres 1 No. 1 CRGO Steel Laminations/ kgs Sheets/ Coils with insulating coating of inorganic/ organic material 1 Nickel Iron Magnetic Strips/ 7.15 kgs Sheets/ Coils 2 Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes 7.07 kgs 3 Electrical Grade Insulating Paper 0.22 kg 4 Mild Steel Steets/ Coils 3.30 kgs 5 Epoxy Resin 5.25 kgs C179 Current Transformers 1 No. 1 CRGO Steel Laminations/ kgs *

22 C180 C181 C182 above 12.5 KV upto & including 24 KV (Indoor Type)(Containing 9 kg of item 1, 9 kg of item 2, 0.30 kg of item 3, 3 kg of item 4 and 10 kg of item 5) Current Transformers above 145 KV upto & including 245 KV (Outdoor Type)(Containing 170 kg of item 1, 145 kg of item 2, 100 kg of item 3, 270 & 100 kg of item 5 and 260 or 312 Ltr. of item 6) Current Transformers above 24 KV (Indoor Type)(Containing 12 kg of item 1, 12 kg of item 2, 0.50 kg of item 3, 4 kg of item 4 and 15 kg of item 5) Current Transformers above 36 KV upto & including 72.5 KV (Outdoor Type)(Containing 45 kg of item 1, 32 kg of item 2, 7.50 kg of item 3, 65 kg of item 5 and 60 or 72 Ltr. of item 6) Sheets/ Coils with insulating coating of inorganic/ organic material 1 Nickel Iron Magnetic Strips/ 9.90 kgs Sheets/ Coils 2 Copper winding Wires/ Strips/Wire Bars/Wire Rods/ Cathodes 9.09 kgs 3 Electrical Grade Insulating paper 0.33 kg 4 Mild Steel Sheets/ Coils 3.30 kgs 5 Epoxy Resin kgs 1 No. 1 CRGO Steel Laminations/ kgs Sheets/ Coils with insulating coating of inorganic/ organic material 1 Nickel Iron Magnetic kgs Strips/Sheets/ Coils 2 Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes kgs 3 Electrical Grade Insulating paper 110 kgs 4 Porcelain Insulator 1 No. 5 Mild Steel Sheets/ Coils 297 kgs 5 Aluminium Sheets/ Plates/ Ingots 105 kgs 6 Transformer Oil 273 Litres 6 Transformer Oil Base Stock Litres 1 No. 1 CRGO Steel Laminations/ kgs Sheets/ Coils with insulating coating of inorganic/ organic material 1 Nickel Iron Magnetic Strips/ kgs Sheets/ Coils 2 Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes kgs 3 Electrical Grade Insulating Paper 0.55 kg 4 Mild Steel Sheets/ Coils 4.40 kgs 5 Epoxy Resin kgs 1 No. 1 CRGO Steel Laminations/ kgs Sheets/ Coils with insulating coating of inorganic/ organic material 1 Nickel Iron Magnetic Strips/ kgs Sheets/ Coils 2 Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes kgs 3 Electrical Grade Indulating paper 8.25 kgs 4 Porcelain Insulator 1 No. 5 Mild Steel Sheets/ Coils kgs 6 Transformer Oil 63.0 Litres C22

23 C183 C184 C185 C186 Current Transformers above 72.5 KV upto & including 145 KV (Outdoor Type)(Containing 120 kg of item 1, 45 kg of item 2, 50 kg of item 3, 90 kg & 45 kg of item 5 and 185 or 222 Ltr. of item 6) Current Transformers upto & including 0.66 KV (Indoor Tyre)(Containing 1 kg of item 1, 1 kg of item 2, 0.05 kg of item 3 and 1 kg of item 4) Current Transformers upto & including 36 KV (Outdoor Type)(Containing 23 kg of item 1, 20 kg of item 2, 3.50 kg of item 3, 45 kg of item 5 and 35 or 42 Ltr. of item 6) Electric Door Bell C23 6 Transformer Oil Base Stock Litres 1 No. 1 CRGO Steel Laminations/ Sheets/ Coils with insulating coating of inorganic/ organic material 138 kgs 1 Nickel Iron Magnetic Strips/ 132 kgs Sheets/ Coils 2 Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes kgs 3 Electrical Grade Insulating paper 55.0 kgs 4 Porcelain Insulator 1 No. 5 Mild Steel Sheets/ Coils 99 kgs 5 Aluminium Sheets/ Plates/ Ingots kgs 6 Transformer Oil Litres 6 Transformer Oil Base Stock Litres 1 No. 1 CRGO Steel Laminations/ 1.15 kg Sheets/ Coils with insulating coating of inorganic/ organic material 1 Nickel Iron Magnetic Strips/ 1.10 kg Sheets/Coils 2 Copper Winding Wires/ Strips/Wire Bars/ Wire Rods/ Cathodes 1.01 kg 3 Electrical Grade Insulating Paper kg 4 Epoxy Resin 1.05 kg 1 No. 1 CRGO Steel Laminations/ kgs Sheets/ Coils with insulating coating of inorganic/ organic material 1 Nickel Iron Magnetic Strips/ kgs Sheets/ Coils 2 Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes kgs 3 Electrical Grade Insulating paper 3.85 kgs 4 Porcelain Insulator 1 No. 5 Mild Steel Sheets/ Coils kgs 6 Transformer Oil Litres 6 Transformer Oil Base Stock 44.1 Litres 1 No. 1 High Impact Polysterene 1.05 kg/kg content in. 2 Copper Wire Rod Ennameled Copper Wire 3 CRGO Sheet (Gauge 35 to 45) Aluminium Ingot C187 (A) Electric Lamp Caps 1000 Pcs. 1 F EXPT ITEM (A) 1.02 kg/kg content in kg/kg content in.

24 C188 (Aluminium)/GLS Caps B22D & E 27/27 (B)FTL Caps (G-13/35mm) (C) FTL Caps (G-13/24mm or 24.5mm) Electric Padestal Fan Aluminium Strip Aluminium Ingot Aluminium Scrap 2. Brass strip Brass Cathode/Rod 2 F EXPT ITEM (B) 1. Aluminium Strip Aluminium Ingots 2. Brass Pin 3 F EXPT ITEM ( C) 1. Aluminium Strip Aluminium Ingots. Aluminium Scrap 2. Brass Pin 1 No. 1 Motor Assembly alongwith Osc. Mech., Cable, Thermostate & Condensor The following raw materials for the above item:- a) Super Enamelled Copper Wire/ Copper Wire Rod C Kgs 2.974Kg 3.047Kgs kgs kgs 2.55 Kgs Kgs 2020 Nos 1.65 Kgs Kgs Kgs 2020 Nos 1 No kg/kg content in b) Electrical Steel Sheet 1.10 kg/kg content in c) Bright Carbon Steel Rod 1.10 kg/kg content in d) Pig Iron 1.10 kg/kg content in e) Cold Rolled Sheet 1.10 kg/kg content in f) Aluminium Alloy 1.05 kg/kg content in g) Bush/Ball Bearing 1 No. h) Thermostate 1 No. 2 A.B.S. Granules 1.05 kg/kg content in 3 Switch 1 No. 3 a) Phenol Formaldehyde Resin 1.05 kg/kg content in. b) Brass Sheet 1.05 kg/kg content in. c) Polystyrene 1.05 kg/kg content in. 4 Thermonal Block 1 No. 5 Polypropylene 1.05 kg/kg content in 6 Cable/Cord with Plug 1 No. a) Plug 1 No. b) Cord/Cable 1.02 Mtr/Mtr content in

25 C189 Electric Fan with Table Stand/ Wall Bracket 7 Capacitors 1 No. 8 Steel Tubes 1.05 Mtr/Mtr content in 9 Castor Wheel 3 Nos. 10 Mesh Guard C25 1 No. 10 a) Spring Steel Wire 1.05 kg/kg content in. b) Black Annealed Wire 1.05 kg/kg content in. 11 Nickel/Chromium Plate 0.97% of net weight of steel to be plated. 1 No 1 Motor Assembly along with oscillation mechanism cables thermostat and condensor 1 a) Super Enamelled Copper Wire/ Copper Wire Rod 1 No 1.01 Kg/Kg content in b) Electric Steel Sheet 1.10 Kg/Kg content in c) Bright Carbon Steel Rod 1.10 Kg/Kg content in d) Pig Iron 1.10 Kg/Kg content in e) Cold Rolled Sheet 1.10 Kg/Kg content in f) Aluminium Alloy 1.05 Kg/Kg content in g) Bush/Ball Bearing 2 Nos h) Thermostat 1 No I) Capacitor (Condenser) Net to Net 2 A.B.S. Granules 2 a) Plug 1 No 1.05 Kg/Kg content in. b) Cable/Cord 1.02 Mtr./Mtr content in 3 Switch 1 No 3 a) Phenol Formaldehyde Resin 1.05 kg/kg content in. b) Brass Sheet 1.05 kg/kg content in. c) Polystyrene 1.05 kg/kg content in. 4 Terminal Block Net to net 5 Polypropylene 1.05 kg/ kg wt of P.P item 6 Silicon Tubes Net + 2% Wastage 7 Cord Grip Net to Net 8 Mesh Guard 1 No. 8 a) Spring Steel Wire 1.05 kg/kg content in. b) Black Annealed Wire 1.05 kg/kg content in

26 C190 C191 C192 C193 Electrical Control Panels made of CRCA Sheets Electrical Copper Earthing Rods Electrical light Fittings with Glass, Switches and Holders Electrical Measuring instruments Type :Moving Iron Moving Coil Dynamo Meter Bimetallic Reed type, Namely Volt meter, Ammeter, frequency Meter, WATT meter, Multimeters, Insulation testers, Maximum Demand Indicator power, Factor meter 1 kg content of import item. 9 Nickel/Chromium Plate 0.97% of net weight of steel to be plated. 1 Mild steel CRCA Sheets/ 1.05 kg cuttings/ coils/ defective/ secondary 1 kg 1 Electrolytic Copper Wire Bars / Wire Rods Copper Scrap 1 Electrical Light Fittings components made of Brass/ Aluminium/SS in the form of castings, pipes, sheets etc. 2 Holders net to net 3 Switches net to net 1.01 kg/kg content in 1.04 kg/kg content in. net to net 4 Glass Shades Net + 2% wastage 1 No. 1 Plastic Moulding Powder 170 gms. a) ABS b) Polycarbonate c) Polyphenylene Oxide d)polyacetal e) Polycarbonate f) Polyamide g) Phenol Formaldehyde(Bakelite)Powder and moulded components thereof 2 Printed circuit Boards Net to Net 3 Pre-painted Aluminium Sheets 20 gms 4 Silicon Oils 1 gm 5 Glass Sheets Net to Net 6 Industrial Jewels with Screws 2 Nos 7 Pivot 2 Nos 8 Hair Springs Net to Net 9 Resistance Wire Net to Net 10 Super Enamelled Copper Wire Net to Net 11 Duralumin Rods, Free Cutting Aluminium Rods, Capillary Tubes a) Copper Bars/ Strips b) Managanin Wire/ Rods c) Eureka Wire/ Rods Net + 2% wastage 12 Magnet Centre Core Net to Net 13 Coil Former 1 No 14 Resistors, MFR, Wire wound & Net to Net Other 15 Mumetals Permalloy Strips & Net to Net Components thereof 16 Pointers/ Pointers Arms Net to Net 17 Taut Bands/Ligaments Net to Net C26

27 C194 C195 C196 C197 C198 C199 C200 C201 Electrical Ovens made of CRCA Sheets Electrical Power HT Capacitors (All film design above 660 Volts up to 132 KV) Electrical Power HT Capacitors (mixed dielectric design) above 660 volts upto 132 KV Electrical Power LT Capacitor (Metalised Polypropylene di-electric design) up to 600 Volts. Electrical Power LT Capacitors (All Polypropylene Film Design) upto 660 Volts Electrical Power LT Capacitors (Mixed dielectric design) up to 600 Volts. Electrical Switch Boxes made of CRCA Sheet Electrical Wiring Accessories made of Aluminium 1 kg content of import item 18 Barllium Copper/ 20 gms Phospher/Bronze Strips and components thereof 19 Aluminium Die Castings 100 gms 20 Bimetallic Springs 2 Nos 21 Springs Steel strips Net to Net 22 Transistors, Capacitors, IC's & Net to Net other electronic components not covered by other input entries 23 Copper Braids Net + 2% wastage 24 Yoke 1 No 25 Hybride Circuits 1 No 26 Zener Diodes 2 Nos 27 Yoke Holder 1 No 28 Lower Boss/Under Boss 1 No 1 Mild steel CRCA Sheets/ cuttings/ coils/ defective/ secondary C kg 1 KVAR 1 P.P film kg 2 Aluminium Foil kg 3 Non PCB Capacitor Oil kg 1 KVAR 1 P.P. film kg 2 Aluminium Foil kg 3 Condensor tissue paper kgs (Electrical Grade) 4 Non PCB Capacitor Oil kg 1 KVAR 1 Metalised Polypropylene (MPP kg Film) 2 Non PCB Capacitor Oil kg 1 KVAR 1 P.P. Film kg 2 Aluminium Foil kg 3 Non PCB Capacitor Oil kg 1 KVAR 1 PP film kgs 2 Aluminium Foil kg 1 kg content of import item 3 Condensor tissue paper kg (Electrical Grade) 4 Non PCB Capacitor Oil kg 1 Mild steel CRCA Sheets/ cuttings/ coils/ defective/ secondary 1 kg 1 Aluminium/ Aluminium Alloy Ingots 1.05 kg 1.10 kg/kg content in 2 Aluminium Sheet 1.05 kg/kg content in 3 PFM Powder (Bakelite Powder) 1.05 kg/kg content in 4 Taleflex/Neoprene Sheet 1.05 kg/kg content in

28 C202 C203 Electrical Wiring Accessories made of Zinc Electrical Wiring Accessories made of copper/copper Alloy & relevant finished parts made of plastic/steel 5 M.S. Wire Rod for making Screw 6 Misc. Items: Die Steel, Emery Belt/Grinding Wheel/Monting Points, HSS/ Carbide Drills & Taps, Reamers, Cutters, Bits, Thread Rolling Dies, Chasers, Aluminium Shot/ Stainless Steel Shots, Cutting Oil, Foundryluxes/Chemicals, Die Release, Paints, Stoving Thinner 1.25 kg/kg content in Upto 2% of FOB value of exports. 1 kg 1 Zinc Ingot 1.10 kg/kg content in export. 2 M.S. Screws Net to net. 3 Nylon-6/LDPE/PP/LDPE 1.05 kg/kg content in. 4 Neoprene/Rubber/Hitite Gasket material 1.05 kg/kg content in. 5 Aluminium Section/Sheet 1.05 kg/kg content in. 6 Misc. Items: Diesteel, Emery Belt Drills,Reamers, Cutting Oil. 1 kg 1 Copper Alloy, Ingot/Scrap(Gun Metal, Aluminium- Bronze) Upto 2% of FOB value of export kg/kg content in of the appropriate alloy 1 a) Copper Wire Bar/Scrap 1.10 kg/kg content in b) Zinc Ingots 1.10 kg/kg content in 1 Brass Scrap 1.10 kg/kg content in 2 Steel Components viz. SS/MSG Net to Net Screws, Nuts, bolts, Revets, Strips, Washers 2 a) SS/MS Wire rods/bars 1.15 kg/kg content in b) SS/MS Sheets/Plates/Coils 1.15 kg/kg content in. 3 Copper/Copper Alloy Net to Net Components, viz. Screws, Nuts, Bolts, Revets, Strips, Washers 3 a) Copper/Copper Alloy wire Rod 1.10 kg/kg content in b) Copper/Copper Alloy Sheet 1.10 kg/kg content in 4 Paper Tube Kraft Paper Electrical Grade Plastic Components Relevant Plastic Material 5 Misc. items: Diesteel, Emery Belt Drills, Reamers, Cutting Oil Net to net kg/kg content in Net to net 1.05 kg/kg content in Upto 2% of FOB value of exports C28

29 C204 C205 C206 Electromechanical Domestic appliances with self contained motor: Vacummizer set - One set consisting of Vacummizer Pump or vacumizer pump(ul approved) or/and Vacuseal container of relevant sizes. Emergency Lamp Enamelled Copper Wire 1 No. 1 Switches Net to net. 2 Thermal Protector Net to net. 3 Filters Net to net. 4 Polyslider Tape Net+5% wastage 5 ABS Granules Net + 5% wastage. 6 Polycarbonate Net + 5% wastage 7 Styrene Acrylonitrile for Vacuseal containers of relevant sizes 8 Polypropylene for Vacuseal containers of relevant sizes 9 Thermoplastics(Evoprene) for Vacuseal containers of relevant sizes 10 Polypropylene for Vacumizer Pump 11 Thermoplastic (Evoprene) for Vacumizer Pump. C kg/kg content in kg/kg content in kg/kg content in 1.05 kg/kg content in 1.05 kg/kg content in. 12 Core for Silencer (Filters) Net to net. 13 Motor Net to net 14 TOD Switches Net to net 15 Power Cord with Plug Net to net. 16 Cable (Single/Multi Core Copper Net to net Wire) 17 KSS Wire Connector Net to net. 18 Flame Retardant ABS for Vacumizer Pump 19 Nylon Polymers for Vacumizer Pump 1.05 kg/kg content in 1.05 kg/kg content in. 20 Drop-in-insert (Paper Brochures) Net to net. 21 Labels (Mylar Stickers) Net to net. 22 Colour Cartons Net to net. 1 No. 1 ABS Plastic Granules 0.5 Kg 2 PP Plastic Granules 0.25Kg 3 Fluorescent Tubes 2 Nos 4 Re chargeable Battery 1 No 5 ICLM No 6 2CS Nos 7 2CS Nos 1 kg 1 Copper Rods/Copper Wire Rods (EC grade)/continuous Cast Copper Rods/Copper Cathodes 1.01 kg/kg content in respect of the product having diameter upto 0.2mm or 1.02 kg/kg content in respect of the product having diameter above 0.2 mm 2 Insulating Enamel/Varnishes Upto 5% of FOB value of exports. C207 1 No. 1 CRGO Steel Sheets 1.26 kg.

30 C208 C209 C210 C211 C212 Exhaust Fan 12"/300MM Sweep Domestic Exhaust Fan 12"/300MM Sweep Industrial type Exhaust Fan 15"/380MM Sweep Industrial type Exhaust Fan 18"/450MM Sweep Industrial Type Exhaust Fan 24"/600MM Sweep Industrial Type Exhaust Fan 9"/225MM Sweep Domestic 2 Copper Wire(SE)/Wire Rod 0.29 kg. 3 Aluminium Ingots/Alloy/Scrap 0.81 kg. 4 Steel Sheet 2.92kgs. 5 Bearing Plain/Sealed 2.00 Nos. 6 Capacitor 1.00 No. 7 Steel Bar 0.14 kg. 1 No. 1 CRGO Steel Sheets/ CRNGO Steel Sheet C kg. 2 Copper Wire(SE)/Wire Rod 0.53 kg. 3 Aluminium Ingots/Alloy/Scrap 1.84 kg. 4 Steel Sheet 4.80 kgs. 5 Bearing Plain/Sealed 2.00 Nos. 6 Capacitor 1.00 No. 7 Steel Bar 0.19 kg. 1 No. 1 CRGO Steel Sheets/ CRNGO Steel Sheet 2.1 kg. 2 Copper Wire(SE)/Wire Rod 0.72 kg. 3 Aluminium Ingots/Alloy/Scrap 2.19 kg. 4 Steel Sheet 6.00 kgs. 5 Bearing Plain/Sealed 2.00 Nos. 6 Capacitor 1.00 No. 7 Steel Bar 0.24 kg. 1 No. 1 CRGO Steel Sheets/ CRNGO Steel Sheet 4.20 kg. 2 Copper Wire(SE)/Wire Rod 1.01 kg. 3 Aluminium Ingots/Alloy/Scrap 1.84 kg. 4 Steel Sheet 7.20 kgs. 5 Bearing Plain/Sealed 2.00 Nos. 6 Capacitor 1.00 No. 7 Steel Bar 0.29 kg. 1 No. 1 CRGO Steel Sheets/ CRNGO Steel Sheet 7.00 kg. 2 Copper Wire(SE)/Wire Rod 1.73 kg. 3 Aluminium Ingots/Alloy/Scrap 3.57 kg. 4 Steel Sheet kgs. 5 Bearing Plain/Sealed 2.00 Nos. 6 Capacitor 1.00 No. 7 Steel Bar 1.00 kg. 1 No. 1 CRGO Steel Sheets/ CRNGO Steel Sheet 0.98 kg. 2 Copper Wire(SE)/Wire Rod 0.23 kg. 3 Aluminium Ingots/Alloy/Scrap 0.58 kg. 4 Steel Sheet 2.40 kgs. 5 Bearing Plain/Sealed 2.00 Nos. 6 Capacitor 1.00 No.

31 C213 Fluorescent Circular Lamp (23W/32W) C214 Fluorescent Tube (36 Watts and 40 Watts) C215 Fluorescent Tubes (18 Watts and 20 Watts) 7 Steel Bar 0.13 kg. 100 Nos 1 Glass Shell 2 Fluorescent Powder kg 3 NA Powder CMZ kg 4 Tungsten Wire kg 5 Lead Glass Flare 0.95 kg 6 Lead Glass Exhaust 1.31 kg 7 Lead in Wire 440 Nos. 8 Cap 101 Nos. 9 Emitter Suspension kg 10 Stamping Ink kg 1000 Nos 1 Glass Tube Shells 1150 Nos. 2 Tungsten Filament 2 a) Tungsten Wire AND 2020 Nos 100 gms b) Molybdenum Wire 176 gms 3 Fluorescent Powder 3 a) Di-Calcium Phosphate AND 6.63 Kg 6.00 kgs b) Calcium Carbonate 2.00kgs 4 Lead Glass Flare Kgs 5 Lead Glass Exhaust 5.00 Kg 6 Aluminium Caps 2020 Nos 6 Aluminium Strips 6.67 kgs 7 Lead-in-wire 4040 Nos 8 Emitter-Suspension 0.06 Litre 9 Anode Strips 0.90 Kg 10 Silicon Resin Kg 11 Mercury 0.18 Kg 12 Nickel Iron Support 0.10 Kg 1000 Nos. 1 Tungsten wire 940 Microns for Filament 2 Moly Wire 820 Microns for Filaments 86 gms 147 gms. 3 Fluorescent Powder 3500 K or 5.00 Kgs K 3 a) Di-Calcium Phosphate 4.50 kgs AND b) Calcium Carbonate 1.50 kgs 4 Lead Glass Tubing for Flare Kgs. 5 Lead Glass Tubing for exhaust 5 Kgs 6 Glass Tube Shells 1150 Nos 7 Silicon Resins Grade H gms C31

32 8 Silver Nitrite 11 gms. 9 Triple Carbonate 47 gms. C216 C217 Fractional horse power single phase case type construsction motor with cast iron or aluminium or sheet metal end cover - 0 Watts to 25 Watts Fractional horse power single phase case type construsction motor with cast iron or aluminium or sheet metal end cover - 26 Watts to 74 Watts 10 Mercury Double Distilled 99.99% minimum Purity 11 Aluminium Caps C gms Nos. 11 Aluminium Strips 3.78 Kgs 12 Lead-in-wire 4040 Nos. 1 No. 1 Cold Rolled Non-oriented gms/kw (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire gm/kw bars/cathodes/rods/winding wires/strips 3 Pig iron for housing (end shield) gms/kw 3 Commercial grade aluminium in gms/kw ingot form (upto 99.5% purity) for housing (end shield) 3 CRCA Sheets for housing (end gms/kw shield) 4 Mild Steel sheets for mounting gms/kw 5 Electrolytic grade aluminium for 6.55 gms/kw rotor 6 EN-8 Alloy Steel for shaft 7.20 gms/kw 7 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 8 Composite insulation material consisting of paper, nylon, polyester, amide, nomex films 1.5% of FOB price 9 Thermal protectors/thermo strips Net to net. 10 Power Capacitor 1 No. (Net to net) 1 No. 1 Cold Rolled Non-oriented gms/kw (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire gm/kw bars/cathodes/rods/winding wires/strips 3 Commercial grade aluminium in gms/kw ingot form (upto 99.5% purity) for housing(end shield) 3 CRCA Sheets for housing(end gms/kw shield) 4 Mild Steel sheets for mounting gms/kw 5 Electrolytic grade aluminium for 3.30 gms/kw rotor 6 EN-8 Alloy Steel for shaft gms/kw 7 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 8 Composite insulation material consisting of paper, nylon, polyester, amide, nomex films 1.5% of FOB price 9 Thermal protectors/thermo strips Net to net. 10 Power Capacitor 1 No. (Net to net)

33 C218 C219 C220 Fractional horse power single phase case type construsction motor with cast iron or aluminium or sheet metal end cover - 75 Watts to 120 Watts Fractional horse power single phase case type construsction motor with cast iron or aluminium or sheet metal end cover Watts & above Galvanised Transmission Line/Telecom Towers & Parts thereof 1 No. 1 Cold Rolled Non-oriented gms/kw (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire 7.35 gm/kw bars/cathodes/rods/winding wires/strips 3 Commercial grade aluminium in gms/kw ingot form (upto 99.5% purity) for housing(end shield) 3 CRCA Sheets for housing(end gms/kw shield) 4 Mild Steel sheets for mounting 9.86 gms/kw 5 Electrolytic grade aluminium for 2.08 gms/kw rotor 6 EN-8 Alloy Steel for shaft 5.97 gms/kw 7 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 8 Composite insulation material consisting of paper, nylon, polyester, amide, nomex films 1.5% of FOB price 9 Thermal protectors/thermo strips Net to net. 10 Power Capacitor 1 No. (Net to net) 1 No. 1 Cold Rolled Non-oriented gms/watt (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire 5.25 gm/watt bars/cathodes/rods/winding wires/strips 3 Commercial grade aluminium in 7.80 gms/watt ingot form (upto 99.5% purity) for housing(end shield) 3 CRCA Sheets for housing(end gms/watt shield) 4 Mild Steel sheets for mounting 6.38 gms/watt 5 Electrolytic grade aluminium for 1.55 gms/watt rotor 6 EN-8 Alloy Steel for shaft 2.78 gms/watt 7 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 8 Composite insulation material consisting of paper, nylon, polyester, amide, nomex films 1.5% of FOB price 9 Thermal protectors/thermo strips Net to net. 10 Power Capacitor 1 No. (Net to net) 1 kg 1 a) Angles of relevant grade of Steel Billets / Blooms of relevant grade of Steel b) Plates of relevant grade of Steel 1.02 kg/kg content in kg/kg content in 1.05 kg/kg content in Slabs of relevant grade of Steel kg/kg content in 2 Unwrought Zinc kg C33

34 C221 GLS Lamps (upto 100 Watts and below) C222 H-3 Halogen Lamps 20W-130W/12V-24V C223 H.P.M.V. Lamps (250 W) C224 H.P.S.V Lamps (250 W) 1000 Nos 1 Glass Shells 1100 No. 2 Relevant Filament 2 a) Tungsten Wire AND C Nos 48 gms b) Molybdenum Wire 81 gms 3 Lead Glass Flare 4.2 kgs 4 Lead Glass Exhaust 2.7 kgs 5 Aluminium Caps 1010 Nos 5 Aluminium Strips 3.1 Kgs 6 Lead in-wire 2020 Nos 7 Moly Support Wire 0.22 K.M Nos. 1 Fused Quartz Main Tube 2.45 kgs. 2 Fused Quartz Exh. Tube 1.02 kgs. 3 Moly Ribbon 0.028x2mm 16.8 Mtr. 4 Moly Wire 0.6 mm Mtrs. 5 Pt. Clad Moly Ribbon 2.20 Mtrs. 6 Tungsten Filament 1010 Nos. 7 Insulated Wire Mtrs. 8 Shrink Tube Mtrs. 9 Metal Cap 1010 Nos. 10 Metal Collar 1010 Nos. 11 Krypton Gas M Nos 1 Glass Shells 1100 No. 2 Matrix Resistor 1010 Nos 3 Yitrium Vanadate 0.44 kg 4 Flush Gas 5.00 Ltrs 5 Exhaust 2.70 Kgs 6 Caps 1010 Nos 7 Lead-in-wire 2020 Nos 8 Aerosil 0.15 Kg 9 Solder Wire 1.80 Kg 10 Flang 7.20 Kg 1000 Nos 1 Glass Shells 1100 No. 2 Arc Tube 1100 No. 3 Getter Rings 2200 Nos. 4 Flare Tube Kgs. 5 Exhaust Tube 5.00 Kg 6 Caps 1010 Nos 7 Lead-in-wire 2200 No. 8 Nickel Manganese Strip 2100 No. 9 Ferro Nickel (Strip/Bracket) Nos 10 Calcium Di-phosphate 0.05 Kg

35 C225 C226 C227 H.P.S.V Lamps Arc Tube (Burners) (150/250/400 W) H4 Halogen Lamps 45/40W to 130/90W (12 V to 24 V) Heater Coil/ tungsten Vaccum Metallizing Coils 1000 Nos 1 Electrodes Nos 2 Frit Ring Nos 3 Amalgam Gms 4 Xenon Gas 8.00 Ltrs 5 PCA Tube Nos 6 Niomium Supports Nos 1000 Nos 1 Hard Glass Main Tube( 16x1.13x1435 mm) 2 Hard Glass Exh. Tube(3.50x0.72x1219 mm) 3 Fused Quartz Glass Rod (2.5mmx1000) 4 Moly Wire 0.6 mm (45.5mm/51.7mm/56.7mm) C kg 0.90 kg kg 175 Mtrs or 1120 Sets 5 Moly Mirror/Shield 1100 No 6 Moly Sleeves (4 pc set set)(2mm/3mm/4mm) 7 Tungsten Filament(Main) 1010 No. 8 Tungsten Filament (Sub) 1010 No. 9 Krypton Gas (99.99%) M 3 10 Black Top Paint (anti glare paint) kg 11 Metal Adopter 1010 No 12 Metal Cap 1010 No 13 Metal Coller 1010 No 1 Kg 1 Tungsten Filament Wire 0.8 mm and above dia. 2 Colloidal Graphite with Solid content of 20% 1.10 Kg 0.10 Kgs C228 Heating Elements 1 No. 1 Resistance Wire 9 SWG Net to Net C229 High Pressure Mercury 1000 Nos. 1 Quartz Rod Body 1010 Nos. Vapour Lamps (125 W) 2 Quartz Exhaust Tube 1010 Nos. C230 C231 C232 C233 3 T.T. Cathodes 1050 Nos. 4 Moly Ribbon 1010 Nos. 5 Matrix Resistors 1050 Nos. 6 Nickel Strips kg 7 Capping Cement 2.2 kgs Inductors with Torroidal 1 kg 1 Ferrites Net to net. Windings 2 Self Soldering Copper Wire 1.02 kg/kg content in. Industrial Heater and Thermocouple Inline Copper Connectors Instant Water Heater 1 MT 1 Nickel Chrome Wire & Tape 1.05 MT/MT content in export. 1 MT 1 Electrolytic Copper Wire Bars 1.05 MT 1 No. 1 ABS Plastic Granules 0.6 Kg 2 PP Plastic Granules 0.3 Kg 3 Heating Element 1 No

36 C234 C235 C236 C237 C238 C239 Insulation Tube Heat Shrinkable (For sleeve conductor) 16 to 25 mm sq. Copper Conductor. Insulation Tube Heat Shrinkable (For sleeve conductor) 70 to 120 mm sq. Copper Conductor Insulation Tube Heat Shrinkable (For sleeve conductor) 185 to 240 mm. sq. Copper conductor Intensifying Screens J Halogen Lamps 1000W/110V 260V J Halogen Lamps 1500W/2000W 4 Thermostat 1 No 5 Stainless Steel Sheet 0.95 Kg 1 No 1 Heat shrinkable Strees control tubing size 15/30 mm 1 No 1 Heat shrinkable Strees control tubing size 20/45 mm 1 No 1 Heat shrinkable anti-tracking whethering insulating tubing (Red colour size) C36 1 Mtr 1 Mtr 1 Mtr 1 kg 1 X- Ray Phosphor kg 2 Polyester Film kg 1000 Nos. 1 Fused Quartz Main Tube kgs. 2 Fused Quartz Exh. Tube 1.47 kgs. 3 Moly Ribbon 0.028x2mm 16.8 Mtr. 4 Moly Wire 0.6 mm 31.4 Mtrs. 5 Pt. Clad Moly Ribbon 3.33 Mtrs. 6 Tungsten Filament with end 1010 Nos. plugs (240V - 300W) 7 Tungsten Support Coil 2240 Nos. 8 Tungsten Support Wire 648 Mtrs. 9 Tungsten Flashing Wire 3.5 Nos. 10 Metal Contact K Nos. 11 Ceramic Base R Nos. 12 Betac Cement 830HB 1.1 kg. 13 Marking Ink Ltr. 14 Krypton Gas M Nos. 1 Fused Quartz Main Tube 20.7 kgs. 2 Fused Quartz Exh. Tube 1.47 kg. 3 Moly Ribbon 0.028x2mm 16.8 Mtr. 4 Moly Wire 0.6 mm 31.4 Mtrs. 5 Pt. Clad Moly Ribbon 3.33 Mtrs. 6 Tungsten Filament with end 1010 Nos. plugs (240V - 300W) 7 Tungsten Support Coil 2240 Nos. 8 Tungsten Support Wire 972 Mtrs. 9 Tungsten Flashing Wire 5.8 Nos. 10 Metal Contact K Nos. 11 Ceramic Base R Nos. 12 Betac Cement 830HB 1.1 kg. 13 Marking Ink Ltr.

37 C240 C241 C242 C243 C244 J Halogen Lamps 300W,500W,110V-260V Juicer Mixer Grinder with Stainless Steel Jar Deleted Deleted Marine Cable of different types and specifications as given in Engineering - Table Krypton Gas M Nos. 1 Fused Quartz Main Tube 9.44 kgs. 2 Fused Quartz Exh. Tube 1.47 kgs. 3 Moly Ribbon 0.028x2mm 16.8 Mtr. 4 Moly Wire 0.6 mm 31.4 Mtrs. 5 Pt. Clad Moly Ribbon 3.33 Mtrs. 6 Tungsten Filament with end plugs (240V - 300W) C Nos. 7 Tungsten Support Coil 2240 Nos. 8 Tungsten Support Wire 288 Mtrs. 9 Tungsten Flashing Wire 3.5 Nos. 10 Metal Contact K Nos. 11 Ceramic Base R Nos. 12 Betac Cement 830HB 1.1 kg. 13 Marking Ink Ltr. 14 Krypton Gas M 3. 1 No. 1 ABS MouldingPowder 1.05 kg/kg content in. 2 Stainless Steel Sheets/Coils 1.15 kg/kg content in. 3 Poly Acetal Moulding Powder 1.05 kg/kg content in. 4 Motor of Relevant Rating Net to net. 5 PVC Compound 1.05 kg/kg content in. 6 Brass Scrap 1.05 kg/kg content in. 7 Polypropylene Moulding Powder 1.05 kg/kg content in. 8 SAN MouldingPowder 1.05 kg/kg content in. 9 Aluminium Ingots 1.05 kg/kg content in. 10 Bronze 1.05 kg/kg content in. 11 Polycarbonate Moulding Powder 1.05 kg/kg content in. 12 Phenol Formaldehyde 1.05 kg/kg content in. 1 KM 1 Copper Wire Bar * 2 PVC Compound * * Note : The quantity of these will be as per the Engineering Table 4 given at the end of this product group. C245 Miniature Circuit Breakers & Isolators 1000 Nos. of poles 1 PETP,PBTP Glass Filled, Nylon 6,Nylon 66, Plain or Glass Filled Polycarbonate, Deldon,Stanyle,Polyamide Kgs

38 Glass Filled Melamine,Urea Formaldehyde Unsaturated Polyester Glass Filed compound (Above materials may/may not be fire retardant) 2 Copper Strips, Copper Silver 27 Kgs Inlay Strips, Brass Strips, Brass Extruded Sections, Phosphor Bronze, Copper Wire Bar, Rods 3 Enamelled Copper Wire, Copper Wire Bar/Rod 12 Kgs 4 Thermo Bimetal, Trimetal Strips 2 Kgs 5 Silver Graphite, Silver Tungsten, Silver Cadmium Oxide contact Tips 6 Copper Silver Coated Copper Braid 7 CRCA Sheets, Strips, Coils, including Copper Clad 8 Miscellaneous Items viz. Mazak, Spring Steel Wire, Strips, Springs, Fire Retardant Chemicals, Insulating Sheet, Board, Fine Blank Parts,Plastic Latches, Toggle Link, Wire Forms, Screws, Stainless Steel Wire,Strips C Nos. 1.8 Kgs 75 Kgs Upto 3% of FOB Value Note: 1. The above norms are for 1000 Single Pole MCBs. For Multiple MCBs, the entitlement will be multiple of above norms depending upon the number of poles. C246 C247 C248 Molybdenum support wire MR-16 Halogen Lamps 20W-100W/6V-12V Multicore PVC insulated unarmoured/ armoured control purpose Copper Cable for Voltage up to 1000 V of different sizes as given in Engineering - Table 5. 1 Kg 1 Molybdenum wire 1.02 kg/kg content in export 1000 Nos. 1 Fused Quartz Main Tube 2.20 kgs. 2 Fused Quartz Exh. Tube 1.02 kgs. 3 Moly Ribbon 0.028x2mm 16.8 Mtr. 4 Moly/Nickel Lead in Wire 2240 Nos. 5 Pt. Clad Moly Ribbon 2.24 Mtrs. 6 Tungsten Filament 1160 Nos. 7 Coated Reflactor 1030 Nos. 8 Krypton Gas M 3 9 Betac Cement 830 HB 1.10 kg/kg content in export 1 KM 1 Copper in the form of Copper Cathode/Wire Bars/ CC Rods (EC Grade)/Copper Wire Rod * 2 (a) PVC Compound for Unarmoured (b) PVC Compound for armoured (c) PVC Resin Plasticizer 3 Filler (Calcium Carbonate/Allumina/Talc/Kaolin e) 60% of weight of PVC compound allowed in Engg. Table 5. 30% of weight of PVC compound allowed in Engg. Table 5 10% of weight of PVC compound allowed in Engg. Table 5.

39 * Note : The quantity of item nos 1 and 2 will be as per the Engineering Table 5 given at the end of this product group.if the alternative item I.e. PVC Resin, DOP & Filler is sought in lieu of import item No. 2 PVC compound, their import shall be permitted to the extent stated below:1. PVC Resin-60% of the permissble quantity of PVC compound as per Engg. Table DOP-30% of the permissble quantity of PVC compound as per Engg. Table -5.3.Filler-10% of the permissble quantity of PVC compound as per Engg. Table -5. (The quantity of item Nos. 1 & 2 (a) or 2(b) will be as per the engg. Table 5 given at the end of this product group.4. Wherever PVC stabilizer is asked for it may be allowed up to 3% of the quantity of PVC compound, subject to reduction of the same % age in the quantity of PVC resin. C249 C250 C251 C252 C253 Non Alloy Ground/Earthing Rods (Galvanised) Out door Weather Proof Light Fitting with Glass Shell/ Acrylic Cover Outdoor Over Head Termination Kits complete with Cable Gland and/or Bush, PVC Shroud And (with or without) Ring Lock Nuts Paper Covered Copper conductors (Strips/Wires). Plated Wires (Single/Stranded) (A) of Copper (B) of Copper Clad/Coated Steel (C) of Copper Alloy kgs 1 Non Alloy Steel Ingot Non Alloy Steel Billets/Bars C kgs kgs. 2 Rolls for Rolling Mills 1.77 kgs. 3 of the finished weight of the ground rod 1 No 1 Relevant Glass Shell/ Acrylic Cover Acrylic sheet (in place of Acrylic Cover) 2 Relevant Moulding Powder/Granules (For Body) 1 No kg/kg content in Acrylic Cover 1.05 Kg/Kg content in 3 M.S Wire Rod 3.4 mm 1.05 Kg/Kg content in 4 Aluminium Sheet 1.05 Kg/Kg content in 5 Relevant Synthetic Rubber 1.05 Kg/Kg content in 1 kg 1 Brass Scrap kg/kg content in 2 PVC Compund 1.05 Kg./kg content in. 2 PVC Shrouds 1.05 kg/kg content in 3 Non Alloy Steel/Coil/Strip/Plate/Bar 1 kg 1 Continuous Cast Copper Rods/Copper Wire Rods /Bars/Cathodes (EC Grade) 1.05 kg/kg content in 1.02 kg/kg content in. 2 Relevant Insulating Paper 1.02Kg/Kg content in. 1 kg 1 1(a) Copper Cathode/Wire Bar/CC Rod/Wire/Copper Wire Rod 1(b) Copper Clad/coated Steel Wire 1(c) Copper Alloy 1 Kg 1 Kg 1 Kg. Wire/Cathode/Wire Bar/C C Rod/Wire/Copper Wire Rod 2 Silver 99.9% purity (Ingot, Granules, Plates or Powder)/Copper wire Rod 0.025Kg. 3 Wire Drawings Dies, Drawing Lubricants Welding Dies, Tin, Nickel, S-Nickel, Electroplating Salts, Plating Additives. 2% of the FOB value of exports

40 4 Plastic Bobbins, Plastic Spools, Protective paper/film. C40 As per packing policy. Export product may have Silver, Nickel or Tin plating on it, but Silver will be allowed only if the export product has Silver plating on it.import of base metal in 1 a), b) or c) will be allowed depending on the base metal used in (a) or (b) or (c) C254 PTFE Insulated Wires and Cables with Copper Conductor 1 kg 1 Copper (Cathode/Wire Bar/Continuous Cast Rod/Wire/Alloy Wire)/Copper Wire Rod 1.02 kg/kg of net content in the export product. 2 PTFE Resin Fine Powder 1.13 kg/kg of net content in the export product 3 Silver 99.9% Purity (Ingots/Shots/Powder) 4 Pigments,Ink,Silicone Fluid, Polyimide Film(Kapton), Lownoise Dispersion, Tween-85, Synthetic Resin, Yarn Plain & Finished Sized including Glass Fibre Yarn, Finished forms, Dispersions of Polymeric Resins 5 S.Nickel, Unplated or Plated Single or Multistrand Wire of Copper/Copper Alloy/Copper covered Steel/Nickel/Resistance Alloys/Stainless Steel, Connectors Flat/Round/Coaxial, Terminations kg/kg of net content in the export product Upto 2% of the FOB value of Export. Upto 2% of the FOB Value of exports Note:1. Silver or Nickel will be allowed on relevance basis, i.e. for silver coated wires, silver will be allowed and for nickel coated wires, nickel will be allowed. C255 Deleted C256 C257 C258 PVC 3 Core Flat Cable Suitable upto 1100 V of size - 3x1.5 sq.mm(22/.3) Overall Dimension = Width(mm)xThickness(m m) i.e. 12.8x6.0 PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x2.5 sq.mm(36/.3)overall Dimension = Width(mm)xThickness(m m) i.e. 14.6x6.4 PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x4.0 sq.mm(57/.3) Overall Dimension = Width(mm)xThickness(m 1000 Meters 1 Copper Wire Rods (EC Grade) kgs. 2 PVC Compound kgs. 2 i) PVC Resin kgs. ii) Plasticizer iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline ) iv) Lubricants kgs kgs kg Meters 1 Copper Wire Rods (EC Grade) kgs. 2 PVC Compound kgs. 2 i) PVC Resin kgs. ii) Plasticizer iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline ) iv) Lubricants kgs kgs kg Meters 1 Copper Wire Rods (EC Grade) kgs. 2 PVC Compound kgs. 2 i) PVC Resin kgs. ii) Plasticizer kgs.

41 C259 C260 C261 C262 C263 m) i.e. 17.2x7.4 PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x6.0sq.mm(85/.3)overall Dimension = Width(mm)xThickness(m m) i.e. 18.7x7.9 PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x10.0 sq.mm(140/.3) overall dimension =width(mm)xthickness( mm) i.e. 23.7x9.9 PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x16.0 sq.mm(226/.3) overall Dimension =width(mm)xthickness( mm) i.e. 28.0x11.4 PVC 3 Core Flat Cable Suitable upto 1100 V of size - 3x25.0 sq.mm(334/.3) Overall Dimension = Width(mm)x Thickness(mm) i.e. 35.5x14.7 PVC 3 Core Flat cable Suitable upto 1100 V of size - 3x35.0 sq.mm(493/.3) overall Dimension = Width(mm)xThickness(m m) i.e. 39.5x16.2 C41 iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline ) iv) Lubricants 7.06 kgs kg Meters 1 Copper Wire Rods (EC Grade) kgs. 2 PVC Compound kgs. 2 i) PVC Resin kgs. ii) Plasticizer iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline ) iv) Lubricants kgs kgs kg Meters 1 Copper Wire Rods (EC Grade) kgs. 2 PVC Compound kgs. 2 i) PVC Resin kgs. ii) Plasticizer iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline ) iv) Lubricants kgs kgs kg Meters 1 Copper Wire Rods (EC Grade) kgs. 2 PVC Compound kgs. 2 i) PVC Resin kgs. ii) Plasticizer iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline ) iv) Lubricants kgs kgs kg Meters 1 Copper Wire Rods (EC Grade) kgs. 2 PVC Compound kgs. 2 i) PVC Resin kgs. ii) Plasticizer iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline ) iv) Lubricants kgs kgs kg Meters 1 Copper Wire Rods (EC Grade) kgs. 2 PVC Compound kgs. 2 i) PVC Resin kgs. ii) Plasticizer iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline ) iv) Lubricants kgs kgs kg. C Meters 1 Copper Wire Rods (EC Grade) kgs.

42 C265 C266 C267 C268 C269 C270 PVC 3 Core Flat Cable Suitable upto 1100 V of size - 3x50.0 sq.mm(703/.3) Overall Dimension = Width(mm)xThickness(m m) i.e. 45.5x18.3 PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x70.0 sq.mm(440/.45) Overall Dimension = Width(mm)xThickness(m m) i.e. 51.0x20.0 PVC 3 Core Flat Cable Suitable upto 1100 V of size- 3x95.0 sq.mm(485/.50) Overall Dimension = Width(mm)xThickness(m m) i.e. 60.0x23.5 PVC Insulated Power Cable with Copper Conductor Unarmoured for Voltage upto 1000 V - Size: 3 Core x 1 Sq.mm PVC Insulated Power Cable with Copper Conductor Unarmoured for Voltage upto 1000 V - Size: 3 Core x 0.75 Sq.mm PVC Insulated Power Cable with Copper Conductor Unarmoured for Voltage upto 1000 V - Size: 3 Core x 0.50 Sq.mm PVC Insulated Power Cable/ L.T PVC Cables of various sizes with Copper/ Aluminium Conductors unarmoured/ 2 PVC Compound kgs. 2 i) PVC Resin kgs. ii) Plasticizer iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline ) iv) Lubricants kgs kgs kg Meters 1 Copper Wire Rods (EC Grade) kgs. 2 PVC Compound kgs. 2 i) PVC Resin kgs. ii) Plasticizer iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline ) iv) Lubricants kgs kgs kg Meters 1 Copper Wire Rods (EC Grade) kgs. 2 PVC Compound kgs. 2 i) PVC Resin kgs. ii) Plasticizer iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline ) iv) Lubricants kgs kgs kg. 1 KM 1 Copper in the form of Copper kgs Cathode/Wire Bars/CC Rods (EC Grade)/Copper Wire Rod 2 PVC Compound kgs a) PVC Resin kgs b) DOP kgs c) Fillers kgs 1 KM 1 Copper in the form of Copper Cathode/Wire Bars/CC Rods (EC Grade)/Copper Wire Rod kgs 2 PVC Compound kgs 1 KM 1 Copper in the form of Copper Cathode/Wire Bars/CC Rods (EC Grade)/Copper Wire Rod kgs 2 PVC Compound kgs 1 KM 1 (a) Copper in the form of Copper Cathode/ Wire Bars/ CC Rods (EC Grade)/Copper Wire Rod 1 (b) Aluminium in the form of Ingots/ Proper Zi Rods * * C42

43 armoured for Voltage upto 1000 V of different sizes as given in Engineering - Table 6. 2 a) PVC Compound for Unarmoured b) PVC Compound for Armoured c) I) PVC Resin 60% of weight of PVC compound allowed in Engg. Table 6. c) II) Plasticizer 30% of weight of PVC compound allowed in Engg. Table 6. c) III) Filler (Calcium Carbonate/Alumina/Talc/Kaoline ) C43 * 10% of weight of PVC compound allowed in Engg. Table 6. * Note : The quantity of these item will be as per the Engineering Table 6 given at the end of this product group.if the alternative item I.e. PVC Resin, DOP & Filler is sought in lieu of import item No. 2 PVC compound, their import shall be permitted to the extent stated below:1. PVC Resin-60% of the permissble quantity of PVC compound as per Engg. Table DOP-30% of the permissble quantity of PVC compound as per Engg. Table -5.3.Filler-10% of the permissble quantity of PVC compound as per Engg. Table -5.Wherever PVC stabilizer is asked for it may be allowed upto 3% of the quantity of PVC compound, subject to reduction of the same % age in the quantity of PVC resin. C271 PVC Insulated Triple Core mining cable for voltage upto 1100 V of different sizes as given in Engineering - Table 7. 1 KM 1 Copper in the form of Copper Cathode/ CC Rods/ Wire Bars (EC Grade)/Copper Wire Rod * 2 PVC Compound * * Note : The quantity of these items will be as per the Engineering Table 7 given at the end of this product group. C272 PVC Insulated Triple Core mining cable for voltage upto 3300 V of different sizes as given in Engineering - Table 8. 1 KM 1 Copper in the form of Copper Cathode/ CC Rods/ Wire Bars (EC Grade)/Copper Wire Rod * 2 PVC Compound * * Note : The quantity of these items will be as per the Engineering Table 8 given at the end of this product group. C273 C274 R Core (Round Shaped, Strip Wound Core) Radiators for Transformers (made out of CRCA Steel Sheet/ Coil 1 MT 1 CRGO Steel Strips/Coils 1.24 MT/MT content in. 1 kg 1 CRCA Non-Alloy Steel Sheets/Coils 1.05 kg/kg Note: In case of Coated/Painted radiators, relevant coating/painting materials may be allowed on actual requirement basis upto 10% of the FOB value of export C275 C276 Rectifier tanks made of CRCA Sheets 1 kg content of import item 1 Mild steel CRCA Sheets/ cuttings/ coils/ defective/ secondary 1.05 kg Reflector for 40 W Twin Tube Box Type Industrial Fitting duly prewired with vaccum pressure impregnated copper wound open type Ballast, 1 No. 1 CRCA Sheet 2 kgs.

44 C277 C278 C279 Power Factor Improvement Capacitor, Starter, Starter Seat,Mains Terminal and Lamp Holders. Screen Insulation Sleeve System Single Phase Electrical Energy Meter Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition 1 No. 1 Heat Shrinkable Conducting Tubing 2 Mtrs. 2 Heat Shrinkable Anti Tracking 2 Mtrs. Tubing 3 Heat Shrinkable Stress Control Tubing 0.5 Mtrs. 4 Anti Tracking Mastic Tape 3.0 Mtrs. 1 No. 1 Aluminium/ Aluminium Alloy Ingots/Sheets 1.05 kg/kg content in export. 2 Brake Magnet/ Bearing Magnets Net to net. 3 Relevant Plastic/Rubber Parts Net to net. 4 MS Sheets/Coils/ Strips 1.05 kg/kg content in export. 5 CRNGO Sheets/Coils/ Strips 1.25 kg/kg content in export. 6 Copper Winding Wire Copper Ingots/ Bars/ Rods (Electrolytic Grade) 7 Bearing Assembly Net to net. 8 Stainless Steel Rods/ Wire Rods/ Bar/ Rounds 1.01 kg/kg content in export 1.02 kg/kg content in the export kg/kg content in export. 9 Registered Assembly 1 No. (Net to net) 10 Phenolic Resin 1.05 kg/kg content in 11 Brass Sheets/ coils/ strips/ scraps 1.05 kg/kg content in 1 No. 1 Cold Rolled Non-oriented gms/watt (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire gm/watt bars/cathodes/rods/winding wires/strips 3 Electrolytic grade aluminium for gms/watt rotor 4 Commercial grade aluminium in gms/watt ingot form (upto 99.5% purity) for housing 4 CRCA Sheets for housing gms/watt 4 Mild Steel sheets for housing gms/watt 5 EN-8 Alloy Steel for shaft 9.65 gms/watt 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material consisting of paper, nylon, polyester, amide, nomex films 1.5% of FOB price 8 Thermal protectors/thermo strips Net to net. 9 Power Capacitor 1 No. (Net to net) C44

45 10 Strain relief bush 1 No. 11 Pull chain switch with chord 1 No. 12 Aluminium alloy 0.50 kgs 13 Lead wire Mtrs 14 Power supply chord 2 Nos. C280 Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition 15 CRCA Steel for end shields, mounting base, Lugs & pads 1.50 kgs. 16 Open circuit switch 1 No. 17 Centrifugal gear 1 No. 18 Terminal/ Crimp cap 3 Nos. or 4 Nos.(as per requirement: quantity to be accounted for in the ) 19 Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation 20 Plastic film for labels/ name plates 21 Transfer ribbon for labels/ name plates 1 No. 1 Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form 3 or 4 sets (as per requirements quantity to be accounted for in ) 10 grams 8 sq. inches gms/watt 2 Copper wire 7.19 gm/watt bars/cathodes/rods/winding wires/strips 3 Electrolytic grade aluminium for 5.58 gms/watt rotor 4 Commercial grade aluminium in 6.00 gms/watt ingot form (upto 99.5% purity) for housing 4 CRCA Sheets for housing 9.00 gm/watt 4 Mild Steel sheets for housing 8.36 gms/watt 5 EN-8 Alloy Steel for shaft 5.70 gms/watt 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material consisting of paper, nylon, polyester, amide, nomex films 1.5% of FOB price 8 Thermal protectors/thermo strips Net to net. 9 Power Capacitor 1 No. (Net to net) 10 Strain relief bush 1 No. 11 Pull chain switch with chord 1 No. 12 Aluminium alloy 0.50 kg 13 Lead wire Mtr 14 Power supply chord 2 Nos. 15 CRCA steel for end shields, 1.50 kgs mounting base, Lugs & pads 16 Open circuit switch 1 No. C45

46 17 Centrifugal gear 1 No. C281 Single phase shell construction motors with aluminium or cast iron or sheet metal end covers Watts to 750 Watts Single phase shell construction motors with aluminium or cast iron or sheet metal end covers watts to 750watts under SKD condition 18 Terminal/ Crimp cap 3 Nos. or 4 Nos. (as per requirement: quantity to be accounted for in the ) 19 Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation 20 Plastic film for labels/ name plates 21 Transfer ribbon for labels/ name plates 1 No. 1 Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire bars/cathodes/rods/winding wires/strips 3 Electrolytic grade aluminium for rotor 4 Commercial grade aluminium in ingot form (upto 99.5% purity) for housing 4 CRCA Sheets for housing C46 3 or 4 sets (as per requirements quantity to be accounted for in ) 10 grams 8 sq. inches gms/watt 2.76 gm/watt 2.80 gms/watt 2.80 gms/watt 4.20 gms/watt 4 Mild Steel sheets for housing 4.88 gms/watt 5 EN-8 Alloy Steel for shaft 1.98 gms/watt 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material consisting of paper, nylon, polyester, amide, nomex films 1.5% of FOB price 8 Thermal protectors/thermo strips Net to net. 9 Power Capacitor 1 No. (Net to net) 10 Strain relief bush 1 No. 11 Pull chain switch with chord 1 No. 12 Aluminium alloy 0.50 kg 13 Lead wire Mtrs 14 Power supply chord 2 Nos 15 CRCA steel for end shields, 1.50 kgs mounting base, Lugs & pads 16 Open circuit switch 1 No. 17 Centrifugal gear 1 No. 18 Terminal/ Crimp cap 3 Nos. or 4 Nos. (as per requirement quantity to be accounted for in the ) 19 Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation 20 Plastic film for labels/ name 10 grams 3 or 4 sets as per requirement quantity to be accounted for in

47 C282 C283 Single phase shell construction motors with aluminium or cast iron or sheet metal end covers Watts & above Single phase shell construction motors with aluminium or cast iron or sheet metal end covers watts and aboveunder SKD condition Single Phase Transformers above KVA plates 21 Transfer ribbon for labels/ name plates 8 sq. inches 1 No. 1 Cold Rolled Non-oriented gms/watt (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire 1.89 gm/watt bars/cathodes/rods/winding wires/strips 3 Electrolytic grade aluminium for 1.63 gms/watt rotor 4 Commercial grade aluminium in 1.63 gms/watt ingot form (upto 99.5% purity) for housing 4 CRCA Sheets for housing 2.44 gms/watt 4 Mild Steel sheets for housing 2.83 gms/watt 5 EN-8 Alloy Steel for shaft 1.18 gms/watt 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material consisting of paper, nylon, polyester, amide, nomex films 1.5% of FOB price 8 Thermal protectors/thermo strips Net to net. 9 Power Capacitor 1 No. (Net to net) 10 Strain relief bush 1 No. 11 Pull chain switch with chord 1 No. 12 Aluminium alloy 0.50 kg 13 Lead wire Mtrs 14 Power supply chord 2 Nos. 15 CRCA steel for end shields, 1.50 kgs mounting base, Lugs & pads 16 Open circuit switch 1 No. 17 Centrifugal gear 1 No. 18 Terminal/ Crimp cap 3 Nos. or 4 Nos. (as per requirement quantity to be accounted for in the ) 19 Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation 20 Plastic film for labels/ name plates 21 Transfer ribbon for labels/ name plates 1 No. 1 CRGO Steel laminations/sheets/coil 2 Copper winding wires/ strips/ wire bars/ wire rods/ cathodes 3 Transformer Oil Transformer Oil Base Stock 3 or 4 sets (as per requirements quantity to be accounted for in ) 10 grams 8 sq. inches 0.57 kgs/kva 0.09 kg/kva 0.21 kgs/kva 0.23Kg/KVA. C47

48 4 Phenolic Resin bonded paper kgs/kva 5 Pre Compressed Press Board 0.05 kg per KVA 6 Press Board Moulding 1 Set (Net to net) C284 C285 C286 C287 Single Phase Transformers above KVA upto KVA Single Phase Transformers abvoe above KVA upto KVA Squirrel cage flame proof motor suitable for upto & including 660 V, 3 Phase, AC supply KW to 22.4 KW Squirrel cage flame proof motor suitable for upto & including 660 V, 3 Phase, AC supply KW to 56.0 KW 7 Motorised Off Load/ on Load Tapchanger 1 No. 1 CRGO Steel laminations/sheets/coil 2 Copper winding wires/ strips/ wire bars/ wire rods/ cathodes 3 Transformer Oil 1 No. (Net to net) 0.79 kgs/kva 0.16 kg/kva 0.58 kgs/kva 3 Transformer Oil Base Stock 0.64 kgs/kw 4 Phenolic Resin bonded paper 0.06 kgs/kva 5 Pre Compressed Press Board 0.08 kg per KVA 6 Press Board Moulding 1 Set per Job 7 Motorised Off Load/ on Load 1 No. per Job Tapchanger 1 No. 1 CRGO Steel 0.66 kgs/kva laminations/sheets/coil 2 Copper winding wires/ strips/ 0.15 kg/kva wire bars/ wire rods/ cathodes 3 Transformer Oil 0.47 kgs/kva 3 Transformer Oil Base Stock 0.52 kgs/kva 4 Phenolic Resin bonded paper kgs/kva 5 Pre Compressed Press Board 0.05 kg per KVA 6 Press Board Moulding 1 Set (Net to net) 7 Motorised Off Load/ on Load 1 No. (Net to net) Tapchanger 1 No. 1 Cold Rolled Non-oriented 8.48 kgs/kw (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire 0.85 kg/kw bars/cathodes/rods/winding wires/strips 3 Pig iron for housing 8.45 kgs/kw 4 Electrolytic grade aluminium for 0.25 kg/kw rotor 5 EN-8 Alloy Steel for shaft 1.35 kgs/kw 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material 1.5% of FOB price consisting of paper, nylon, polyester, amide, nomex films 1 No. 1 Cold Rolled Non-oriented 6.83 kgs/kw (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire 0.64 kg/kw bars/cathodes/rods/winding wires/strips 3 Pig iron for housing 5.24 kgs/kw 4 Electrolytic grade aluminium for rotor 0.21 kg/kw C48

49 C288 C289 C290 C291 Squirrel cage flame proof motors suitable for upto & including 660 V, 3 Phase AC supply - 0 KW to 0.75 KW Squirrel cage flame proof motors suitable for upto & including 660 V, 3 Phase, AC supply - above 0.76 KW to 7.4 KW Squirrel cage screen protected (SP)/ Drip proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply KW to 7.4 KW Squirrel cage screen protected (SP)/ Drip proof (DP) motors suitable for upto & 5 EN-8 Alloy Steel for shaft 1.03 kgs/kw 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material 1.5% of FOB price consisting of paper, nylon, polyester, amide, nomex films 1 No. 1 Cold Rolled Non-oriented kgs/kw (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire 2.22 kg/kw bars/cathodes/rods/winding wires/strips 3 Pig iron for housing kgs/kw 4 Electrolytic grade aluminium for 0.56 kg/kw rotor 5 EN-8 Alloy Steel for shaft 3.04 kgs/kw 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material 1.5% of FOB price consisting of paper, nylon, polyester, amide, nomex films 1 No. 1 Cold Rolled Non-oriented kgs/kw (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire 1.15 kg/kw bars/cathodes/rods/winding wires/strips 3 Pig iron for housing kgs/kw 4 Electrolytic grade aluminium for 0.31 kg/kw rotor 5 EN-8 Alloy Steel for shaft 1.56 kgs/kw 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material 1.5% of FOB price consisting of paper, nylon, polyester, amide, nomex films 1 No. 1 Cold Rolled Non-oriented 9.60 kgs/kw (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire 0.91 kg/kw bars/cathodes/rods/winding wires/strips 3 Pig iron for housing 6.79 kgs/kw 3 Commercial grade aluminium in 2.27 kgs/kw ingot form (upto 99.5% purity) for housing 4 Electrolytic grade aluminium for 0.46 kg/kw rotor 5 EN-8 Alloy Steel for shaft 1.33 kgs/kw 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material 1.5% of FOB price consisting of paper, nylon, polyester, amide, nomex films 1 No. 1 Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form 5.94 kgs/kw 2 Copper wire 0.68 kg/kw C49

50 C292 C293 C294 including 660 V, 3 Phase, AC supply KW to 22.4 KW Squirrel cage screen protected (SP)/ Drip proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply KW to 74.0 KW Squirrel cage screen protected (SP)/ Drip Proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply KW to 374 KW Squirrel cage screen protected (SP)/ Drip Proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply KW & above. bars/cathodes/rods/winding wires/strips 3 Pig iron for housing 5.05 kgs/kw 3 Commercial grade aluminium in 1.68 kgs/kw ingot form (upto 99.5% purity) for housing 4 Electrolytic grade aluminium for 0.17 kg/kw rotor 5 EN-8 Alloy Steel for shaft 1.22 kgs/kw 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material 1.5% of FOB price consisting of paper, nylon, polyester, amide, nomex films 1 No. 1 Cold Rolled Non-oriented 5.24 kgs/kw (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire 0.44 kg/kw bars/cathodes/rods/winding wires/strips 3 Pig iron for housing 3.37 kgs/kw 3 Commercial grade aluminium in 1.12 kgs/kw ingot form (upto 99.5% purity) for housing 4 Electrolytic grade aluminium for 0.14 kg/kw rotor 5 EN-8 Alloy Steel for shaft 1.14 kgs/kw 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material 1.5% of FOB price consisting of paper, nylon, polyester, amide, nomex films 1 No. 1 Cold Rolled Non-oriented 4.44 kgs/kw (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire 0.58 kg/kw bars/cathodes/rods/winding wires/strips 3 Pig iron for housing 2.86 kgs/kw 3 Commercial grade aluminium in 0.95 kgs/kw ingot form (upto 99.5% purity) for housing 4 EN-8 Alloy Steel for shaft 0.79 kgs/kw 5 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 6 Composite insulation material 1.5% of FOB price consisting of paper, nylon, polyester, amide, nomex films 1 No. 1 Cold Rolled Non-oriented 3.46 kgs/kw (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire 0.63 kg/kw bars/cathodes/rods/winding wires/strips 3 Mild Steel sheets for housing 3.42 kgs.kw 4 EN-8 Alloy Steel for shaft 0.97 kgs/kw C50

51 C295 C296 C297 C298 C299 C300 Squirrel cage screen protected (SP)/Drip Proof (DP) Motors suitable for upto & including 660 V, 3 Phase, AC supply - 0 KW to 0.75 KW Stainless Steel Cable Ties made of SS316 Grade Rotor/Rotor Stampings & Stator Stack/ Stator Stampings - (in sets) for Electric Motors Starter Motor Armature for High Speed Vehicles Cars etc. Stator for Alternator for Heavy Duty (12 Volts Amps) Stator for Alternator for Medium Duty (12 Volts Amps) 5 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 6 Composite insulation material consisting of paper, nylon, polyester, amide, nomex films 1 No. 1 Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form C51 1.5% of FOB price kgs/kw 2 Copper wire 1.90 kg/kw bars/cathodes/rods/winding wires/strips 3 Pig iron for housing kgs/kw 3 Commercial grade aluminium in 4.63 kgs/kw ingot form (upto 99.5% purity) for housing 4 Electrolytic grade aluminium for 0.71 kg/kw rotor 5 EN-8 Alloy Steel for shaft 2.08 kgs/kw 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material consisting of paper, nylon, polyester, amide, nomex films 1 kg 1 Stainless Steel Strips/Coils of 316 Grade 1 kg 1 CRGO/CRNGO/CRCA Steel Sheets/Coils 1.5% of FOB price 1.25 kg 1.75 Kg/Kg content in. 2 Aluminium Ingot 1.06 Kg/Kg content in. 1 No. 1 Copper Electrolytic Grade kg Standard Wire/ Bar/Rod/Ingots 2 CRNGO Steel Sheet/ Coil 0.5 to kgs 1.0 mm thickness 3 Soldering Wire/ Billet kg 4 Nomex/Hypertherm F3 Ply, kg Grade 33/313 Thickness 0.16 to 0.21 mm in rolls/sheets or equivalent 1 No. 1 Copper Electrolytic Grade kg Standard Wire/ Bar/Rod/Ingots 2 CRNGO Steel Sheet/Coil 0.5 to kgs 1.0 mm thickness 3 Soldering Wire/ Billet kg 4 Nomex/Hypertherm F3 Ply, kg Grade 33/313 Thickness 0.16 to 0.21 mm in rolls/sheets or equivalent 1 No. 1 Copper Electrolytic Grade kg Standard Wire/ Bar/Rod/Ingots 2 CRNGO Steel Sheet/ Coil 0.5 to 3 kgs 1.0 mm thickness 3 Soldering Wire/ Billet kg 4 Nomex/Hypertherm F3 Ply, kg Grade 33/313 Thickness 0.16 to 0.21 mm in rolls/sheets or equivalent C301 Steel Welding Electrodes 1 Kg. 1 Relevant Mild Steel Wire Rod/ 0.70 Kg

52 C302 C303 C304 C305 C306 C307 C308 C309 C310 made of Mild Steel/ Stainless Steel Street Lighting Fittings suitable for 40 W F.T.L. duly prewired with vaccum pressure impregnated copper wound open type Ballast, Power Factor Improvement Capacitor, Starter, Starter Seat, Mains Terminal and Lamp Holders. Deleted Deleted Deleted Deleted Deleted Thermocouple Cartridges of Platinum/Platinum Rhodium Alloy Thermocouple Cartridges of PT/PT-13% RH (type- R) Mark VII Expandable Thermocouple Tips in PT/PT 13% RH (Type R) with paper tube of various length - Mark VII Three Jar Mixer with Stainless Steel Jar for Kitchen appli- cation Stainless Steel Wire Rod 2 Low Carbon Ferro Manganese Kg 3 Futile Sand Kg 4 Titanium Dioxide Kg 1 No. 1 CRCA Sheet 1 kg. 2 Ballast 1 No. 3 Holders 2 Nos. 4 Capacitors 1 No. 5 Starter 1 No Nos. 1 Thermocouple Wire 0.05 mm Diameter Pure Platinum 1 Thermocouple Wire 0.05 mm Diameter Platinum 13% Rhodium (Relevant to be used in ) 2 Quartz Glass Tube OD-3 mm, ID-2 mm (Relevant to be used in 100 Nos. 1 Thermocouple Quality Platinum Wire Diameter 0.04 mm to 0.06 mm 2 Thermocouple Quality Wire 13% Rhodium/Platinum Diameter 0.04 mm to 0.06mm 3 Quartz Glass Tubes: ID - 2 mm, OD - 3 mm 1.96 gms gms kg kg/kg content in export kg/kg content in export. Net to net. 1 No. 1 Polypropylene Moulding Powder 1.05 kg/kg content in. 2 Natural/Synthetic Rubber(Relevent item to be allowed) 1.05 kg/kg content in. 3 Brass Scrap 1.05 kg/kg content in. 4 ABS MouldingPowder 1.05 kg/kg content in. 5 Nylon Moulding Powder 1.05 kg/kg content in. 6 Stainless Steel Sheets/Coils 1.15 kg/kg content in. C52

53 C311 C312 C313 C314 C315 Three Phase Electrical Energy Meter Tin Plated HDHC Copper Bus Bar or Electrolytic Grade Tin Plated Copper Bus Bars or Tinned Copper Strips/ Flats Tinned Copper Terminal Ends Tinsel Conductor (Flat/Copper/Copper Alloy Conductors Spun with High Tenacity Polyester Filament Yarn) Totally enclosed fan cooled slip ring induction motors suitable for upto & including 660 V, 3 Phase, AC supply - 0 KW to 37 KW 7 Aluminium Ingots 1.05 kg/kg content in. 8 Bronze 1.05 kg/kg content in. 9 Phenol Formaldehyde 1.05 kg/kg content in. 10 Stainless Steel Round Bar 1.05 kg/kg content in. 11 Polycarbonate Moulding Powder 1.05 kg/kg content in. 12 Circuit Breaker Assembly Net to net. 13 Motor of Relevant Rating Net to net. 1 No. 1 Aluminium/ Aluminium Alloy Ingots/Sheets C kg/kg content in export. 2 Brake Magnet/ Bearing Magnet Net to net. 3 Relevant Plastic/ Rubber Parts Net to net. 4 MS Sheets/Coils/Strips 1.05 kg/kg content in export. 5 CRNGO Sheets/ Coils/Strips 1.25 kg/kg content in export. 6 Copper Winding Wire Copper Ingots/ Bars/ Rods (Electrolytic Grade) 1.01 kg/kg content in export 1.02 kg/kg content in export. 7 Bearing Assembly Net to net. 8 Stainless Steel Rods/ Wire Rods/Bar/ Rounds 1 MT 1 Copper Wire Bars/ Ingots 1.05 MT 1 MT 1 Copper Scrap Copper Tube/ Copper Cathode/ Copper Wire Bar/ Billets 1.05 kg/kg content in export MT/MT of Copper content in 1.03 MT/MT content in. 1 kg 1 Copper Bars/Rods/Wires 1.03 kg/kg content in 2 Polyester Filament Yarn of High Tenacity(Tenacity More than 7 gms. denier) 1 No. 1 Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire bars/cathodes/rods/winding wires/strips 3 Pig iron for housing 3 Commercial grade aluminium in ingot form (upto 99.5% purity) for housing 1.03 kg/kg content in kgs/kw 1.56 kg/kw 5.86 kgs/kw 1.96 kgs/kw

54 4 EN-8 Alloy Steel for shaft 2.20 kgs/kw 5 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) C316 C317 C318 Totally enclosed fan cooled slip ring induction motor suitable for upto & including 660 V, 3 Phase, AC supply KW to 75 KW Totally enclosed Fan Cooled squirrel cage induction motor suitable for upto & including 660 V, 3 Phase, AC supply - 0 KW to 0.75 KW Totally enclosed fan cooled squirrel cage induction motor suitable for upto & including 660 V, 3 Phase, AC supply KW to 7.4 KW 6 Composite insulation material 1.5% of FOB price consisting of paper, nylon, polyester, amide, nomex films 1 No. 1 Cold Rolled Non-oriented 8.76 kgs/kw (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire 1.33 kg/kw bars/cathodes/rods/winding wires/strips 3 Pig iron for housing 5.75 kgs/kw 3 Commercial grade aluminium in 1.92 kgs/kw ingot form (upto 99.5% purity) for housing 4 EN-8 Alloy Steel for shaft 1.91 kgs/kw 5 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 6 Composite insulation material 1.5% of FOB price consisting of paper, nylon, polyester, amide, nomex films 1 No. 1 Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form Relevant Lamination/ Stampings kgs/kw 1 set per motor core packs (1 No. of stator pack and 1 No. of rotor pack) 2 Copper wire 1.90 kg/kw bars/cathodes/rods/winding wires/strips 3 Pig iron for housing kgs/kw 3 Commercial grade aluminium in 4.63 kgs/kw ingot form (upto 99.5% purity) for housing 4 Electrolytic grade aluminium for 0.71 kg/kw rotor 5 EN-8 Alloy Steel for shaft 2.08 kgs/kw 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material consisting of paper, nylon, polyester, amide, nomex films 1 No. 1 Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form Relevant Lamination/ Stampings core packs (1 No. of stator pack and 1 No. of Rotor pack) 2 Copper wire bars/cathodes/rods/winding wires/strips 3 Pig iron for housing 3 Commercial grade aluminium in ingot form (upto 99.5% purity) for housing 1.5% of FOB price 9.60 kgs/kw 1 Set per motor 0.91 kg/kw 6.79 kgs/kw 2.27 kgs/kw C54

55 C319 C320 C321 Totally enclosed fan cooled squirrel cage induction motor suitable for upto & including 660 V, 3 Phase, AC supply KW to 22.4 KW Totally enclosed fan cooled squirrel cage induction motor suitable for upto & including 660 V, 3 Phase, AC supply KW to 56.0 KW Totally enclosed fan cooled squirrel cage induction motor suitable for upto & including 660 V, 3 Phase, AC supply KW to 374 KW 4 Electrolytic grade aluminium for rotor C kg/kw 5 EN-8 Alloy Steel for shaft 1.33 kgs/kw 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material 1.5% of FOB price consisting of paper, nylon, polyester, amide, nomex films 1 No. 1 Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form Relevant Lamination/ Stampings 8.38 kgs/kw 1 set per motor core packs (1 No. of stator pack and 1 No. of rotor pack) 2 Copper wire 0.76 kg/kw bars/cathodes/rods/winding wires/strips 3 Pig iron for housing 4.78 kgs/kw 3 Commercial grade aluminium in 1.60 kgs/kw ingot form (upto 99.5% purity) for housing 4 Electrolytic grade aluminium for 0.27 kg/kw rotor 5 EN-8 Alloy Steel for shaft 1.31 kgs/kw 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material 1.5% of FOB price consisting of paper, nylon, polyester, amide, nomex films 1 No. 1 Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form Relevant Lamination/ Stampings 7.28 kgs/kw 1 set per motor core packs (1 No. of stator pack and 1 No. of rotor pack) 2 Copper wire 0.67 kg/kw bars/cathodes/rods/winding wires/strips 3 Pig iron for housing 4.34 kgs/kw 3 Commercial grade aluminium in 1.45 kgs/kw ingot form (upto 99.5% purity) for housing 4 Electrolytic grade aluminium for 0.21 kg/kw rotor 5 EN-8 Alloy Steel for shaft 1.33 kgs/kw 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material 1.5% of FOB price consisting of paper, nylon, polyester, amide, nomex films 1 No. 1 Cold Rolled Non-oriented 6.64 kgs/kw (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire bars/cathodes/rods/winding wires/strips 0.95 kg/kw 3 Pig iron for housing 4.26 kgs/kw

56 C322 C323 C324 Totally enclosed fan cooled squirrel cage induction motor suitable for upto & including 660 V, 3 Phase, AC supply KW & above. Transformer Lamination/cut core made of Silicon Electrical Steel (CRGO/CRNGO) Transformers (Aluminium Wound) above 100 KVA upto & including 400 KVA, 3 Phase, Oil Cooled C56 3 Commercial grade aluminium in 1.47 kgs/kw ingot form (upto 99.5% purity) for housing 4 EN-8 Alloy Steel for shaft 1.10 kgs/kw 5 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 6 Composite insulation material 1.5% of FOB price consisting of paper, nylon, polyester, amide, nomex films 1 No. 1 Cold Rolled Non-oriented 4.30 kgs/kw (CRNO) electrical steel sheets/sheets in coil form 2 Copper wire 0.76 kg/kw bars/cathodes/rods/winding wires/strips 3 Mild Steel sheets for housing 4.70 kgs.kw 4 EN-8 Alloy Steel for shaft 1.08 kgs/kw 5 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 6 Composite insulation material consisting of paper, nylon, polyester, amide, nomex films 1.0 MT 1 CRGO Silicon Electrical Steel in Coil Form 1.5% of FOB price 1.07 MT/MT content in 1 No. 1 CRGO Steel/ Sheet/ Coil 2.20 kgs/kva CRGO Transformers Lamination Net to net 2 Aluminium Winding Wires/ 0.66 kg/kva strips/ ingots/ wire bars 3 Transformer Oil 2.52 kgs/kva 3 Transformer Oil Base Stock 2.77 kgs/kva 4 Pre-compressed press board 0.30 kgs/kva 5 Phenolic Resin bonded paper 0.03 kgs/kva 6 Motorised off-load/ On-load Tap 1 No. (Net to net) Changer/Switch 7 Pre-pressed boards/ moulded 1 No. (Net to net) components Note : In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted. C325 Transformers (Aluminium Wound) upto & including 100 KVA 3 Phase, Oil Cooled 1 No. 1 CRGO Steel/ Sheet/ Coil 2.64 kgs/kva CRGO Transformers Lamination Net to net 2 Aluminium Winding Wires/ 1.12 kg/kva strips/ ingots/ wire bars 3 Transformer Oil 3.57 kgs/kva 3 Transformer Oil Base Stock 3.93 kgs/kva 4 Pre-compressed press board 0.13 kgs/kva 5 Phenolic Resin bonded paper kgs/kva 6 Motorised Off-load/ On-load Tap Changer/ Switch 1 No. (Net to net)

57 7 Pre-pressed boards/ moulded components C57 1 No. (Net to net) Note 1. In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted.note 2. If in the, the core is of amorphous electrical steel, then import of 2.6 kg/kva of "amorphus electrical steel sheet/ coil may be allowed in place of import item No. 1 i.e. CRGO Steel laminations/ Sheets/ Coil allowed in this norm C326 Transformers (Copper Wound) above 100 KVA upto & including 400 KVA, 3 Phase, Oil Cooled 1 No. 1 CRGO Steel/ Sheet/ Coil CRGO Transformers Lamination 2 Copper Winding Wires/ strips/ wire bars/ wire rods/cathodes 3 Transformer Oil 2.11 kgs/kva Net to net 1.53 kg/kva 2.31 kgs/kva 3 Transformer Oil Base Stock 2.54 kgs/kva 4 Pre-compressed press board 0.26 kgs/kva 5 Phenolic Resin bonded paper 0.05 kgs/kva 6 Motorised off-load/ on-load tap changer/ Switch 1 No. (Net to net) 7 Pre-pressed boards/ moulded 1 No. (Net to net) components Note: In case the tranformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted C327 Transformers (Copper Wound) above KVA upto & including KVA, 3 Phase, Oil Cooled 1 No. 1 CRGO Steel/ Sheet/ Coil 0.99 kgs/kva CRGO Transformers Lamination Net to net 2 Copper winding wires/ strips/ 0.51 kg/kva wire bars/ wire rods/ cathodes 3 Transformer Oil 0.86 kgs/kva 3 Transformer Oil Base Stock 0.95 kgs/kva. 4 Pre-compressed press board 0.11 kgs/kva 5 Phenolic Resin bonded paper 0.02 kgs/kva 6 Motorised off-load/ on-load tap changer/ Switch 1 No. (Net to net) 7 Pre-pressed boards/ moulded 1 No. (Net to net) components Note: In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transfor Oil Base Stock, shall not be permitted C328 Transformers (Copper Wound) above KVA, 3 Phase, Oil Cooled 1 No. 1 CRGO Steel/ Sheet/ Coil 0.61 kgs/kva CRGO Transformers Lamination Net to net 2 Copper winding wires/ strips/ 0.23 kg/kva wire bars/ wire rods/ cathodes 3 Transformer Oil 0.42 kgs/kva 3 Transformer Oil Base Stock 0.46 kgs/kva. 4 Pre-compressed press board 0.05 kgs/kva 5 Phenolic Resin bonded paper 0.01 kgs/kva 6 Motorised off-load/ on-load tap changer/ Switch 7 Pre-pressed boards/ moulded components 1 No. (Net to net) 1 No. (Net to net)

58 Note: In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted C329 Transformers (Copper Wound) above 1600 KVA upto & including 4000 KVA, 3 Phase, Oil Cooled 1 No. 1 CRGO Steel/ Sheet/ Coil CRGO Transformers Lamination 2 Copper winding wires/ strips/ wire bars/ wire rods/ cathodes 3 Transformer Oil C kgs/kva Net to net 0.92 kg/kva 0.89 kgs/kva 3 Transformer Oil Base Stock 0.99 kgs/kva. 4 Pre-compressed press board 0.23 kgs/kva 5 Phenolic Resin bonded paper 0.02 kgs/kva 6 Motorised off-load/ on-load tap changer/ Switch 1 No. (Net to net) 7 Pre-pressed boards/ moulded 1 No. (Net to net) components Note. In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted. C330 Transformers (Copper Wound) above KVA upto & including KVA, 3 Phase, Oil Cooled 1 No. 1 CRGO Steel/ Sheet/ Coil 0.84 kgs/kva CRGO Transformers Lamination Net to net 2 Copper winding wires/ strips/ 0.39 kg/kva wire bars/ wire rods/ cathodes 3 Transformer Oil 0.79 kgs/kva 3 Transformer Oil Base Stock 0.87 kgs/kva 4 Pre-compressed press board 0.08 kgs/kva 5 Phenolic Resin bonded paper 0.02 kgs/kva 6 Motorised off-load/ on-load tap changer/ Switch 1 No. (Net to net) 7 Pre-pressed boards/ moulded 1 No. (Net to net) components Note: In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Tranformer Oil or Transformer Oil Base Stock, shall not be permitted. C331 Transformers (Copper Wound) above 400 KVA upto & including 1600 KVA, 3 Phase, Oil Cooled 1 No. 1 CRGO Steel/ Sheet/ Coil CRGO Transformers Lamination 2 Copper Winding Wires/ strips/ wire bars/ wire rods/cathodes 3 Transformer Oil 1.71 kgs/kva Net to net 1.22 kg/kva 1.31 kgs/kva 3 Transformer Oil Base Stock 1.44 kgs/kva. 4 Pre-compressed press board 0.26 kgs/kva 5 Phenolic Resin bonded paper 0.03 kgs/kva 6 Motorised off-load/ on-load tap changer/ Switch 1 No. (Net to net) 7 Pre-pressed boards/ moulded 1 No. (Net to net) components Note: In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted C332 Transformers (Copper Wound) above 4000 KVA 1 No. 1 CRGO Steel/ Sheet/ Coil CRGO Transformers Lamination 1.12 kgs/kva Net to net

59 upto & including KVA, 3 Phase, Oil Cooled 2 Copper winding wires/ strips/ wire bars/ wire rods/ cathodes 0.61 kg/kva 3 Transformer Oil base Stock kg/kva 4 Pre-compressed press board 0.21 kgs/kva 5 Phenolic Resin bonded paper 0.03 kgs/kva 6 Motorised off-load/ on-load tap changer/ switch 7 Pre-pressed boards/ moulded components 1 No. (Net to net) 1 No. (Net to net) Note. In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil of Transformer Oil Base Stock, shall not be permitted. C333 Transformers (Copper Wound) above KVA upto & including KVA, 3 Phase, Oil Cooled 1 No. 1 CRGO Steel/ Sheet/ Coil CRGO Transformers Lamination 2 Copper winding wires/ strips/ wire bars/ wire rods/ cathodes 3 Transformer Oil 0.70 kgs/kva Net to net 0.29 kg/kva 0.58 kgs/kva 3 Transformer Oil Base Stock 0.63 kg/kva 4 Pre-compressed press board 0.05 kgs/kva 5 Phenolic Resin bonded paper 0.01 kgs/kva 6 Motorised off-load/ on-load tap changer/ Switch 1 No. (Net to net) 7 Pre-pressed boards/ moulded 1 No. (Net to net) components Note: In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted. C334 Transformers (Copper Wound) upto & including 100 KVA, 3 Phase, Oil Cooled 1 No. 1 CRGO Steel/ Sheet/ Coil 2.64 kgs/kva CRGO Transformers Lamination Net to net 2 Copper Winding Wires/ strips/ 1.55 kg/kva wire bars/wire rods/cathodes 3 Transformer Oil base Stock 3.26Kg/KVA. 4 Pre-compressed press board 0.25 kgs/kva 5 Phenolic Resin bonded paper 0.3 kgs/kva 6 Motorised off-load/ on-load tap changer/ Switch 1 No. (Net to net) 7 Pre-pressed boards/ moulded 1 No. (Net to net) components Note: In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted. C335 Transformers above 400 KVA upto and including 1600 KVA (Aluminium Wound) 1 No. 1 CRGO Steel/ Sheet/ Coil 1.17 kg/kva CRGO Transformers Lamination Net to net 2 Aluminium Winding Wire/Strips 0.88 kg/kva 3 Transformer Oil 1.08 Ltr./KVA 4 Phenolic Resin Bonded Paper kg/kva 5 Motorised Off Load/ Onload Tap Net to net. Changer/ Switch Note: In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted C59

60 C336 C337 C338 C339 C340 C341 Tungsten Filaments for GLS Lamps upto 100 watts and below TV Antenna Motors Unplated Conductors of Copper Voltage (Potential) Transformers above 0.66 KV upto & including 12.5 KV (Indoor Type)(Containing 16 kg of item 1, 2.50 kg of item 2, 1 kg of item 3, 3 kg of item 4 and 7 kg of item 5) Voltage (Potential) transformers above 12.5 KV upto & including 24 KV (Indoor Type)(Containing 20 kg of item 1, 4.50 kg of item 2, 2 kg of item 3, 3 kg of item 4 and 11 kg of item 5) Voltage (Potential) Transformers above 145 KV (Outdoor Type)(Containing 200 kg of item 1, 45 kg of item 2, 50 kg of item 3, 175 kg of item 5 and 180 or 216 Ltr. of item 6) 1000 Nos. 1 Tungsten wire (Black) gms 2 Molybdenum Wire (Black) gms 3 Collodial Graphite gms 100 Nos 1 Shaft elimination worm assy 102 Nos 2 commutator 206 Nos 3 Brush 206 Nos 4 Connector 206 Nos 5 Pole 206 Nos 6 Gear 204 Nos 7 28 Swg Slaper enamel copper 7 kg wire 1 kg 1 Copper Wire Bar/Rod/Wire 1.02 kg/kg content in export. 2 Copper Clad Steel 1.02 kg/kg content in export. 3 Copper Alloy Wire 1.02 kg/kg content in export. 1 No. 1 CRGO Steel Laminations Sheets/ kgs Coils 1 Nickel Iron Magnetic Strips/ kgs Sheets/ Coils 2 Copper Winding Wires/ Strips/ kgs Wire Bars/ Wire Rods/ Cathodes 3 Electrical Grade Insulating Paper 1.10 kgs 4 Mild Steel Sheets/ Coils 3.30 kgs 5 Epoxy Resin 7.35 kgs 1 No. 1 CRGO Steel Laminations Sheets/ 23.0 kgs Coils 1 Nickel Iron Magnetic Strips/ 22.0 kgs Sheets/ Coils 2 Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes kgs 3 Electrical Grade Insulating Paper 2.20 kgs 4 Mild Steel Sheets/ Coils 3.30 kgs 5 Epoxy Resin kgs 1 No. 1 CRGO Steel Laminations Sheets/ kgs Coils 1 Nickel Iron Magnetic Strips/ kgs Sheets/ Coils 2 Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes kgs 3 Electrical Grade Insulating Paper 55.0 kgs 4 Porcelain Insulator 1 No. 5 Mild Steel Sheets/ Coils kgs 6 Transformer Oil 189 Litres 6 Transformer Oil Base Stock Litres C60

61 C342 C343 C344 C345 C346 Voltage (Potential) Transformers above 24 KV (Indoor Type)(Containing 25 kg of item 1, 5.50 kg of item 2, 3 kg of item 3, 5 kg of item 4 and 18 kg of item 5) Voltage (Potential) Transformers above 36 KV upto & including 72.5 KV (Outdoor Type)(Containing 69 kg of item 1, 9 kg of item 2, 18 kg of item 3, 78 kg of item 5 and 45 or 54 Ltr. of item 6) Voltage (Potential) Transformers above 72.5 KV upto & including 145 KV (Outdoor Type)(Containing 125 kg of item 1, 27 kg of item 2, 40 kg of item 3, 115 kg of item 5 and 155 or 186 Ltr. of item 6) Voltage (Potential) Transformers upto & including 0.66 KV (Indoor Type)(Containing 7 kg of item 1, 1.50 kg of item 2, 0.50 kg of item 3, 3 kg of item 4 and 7 kg of item 5) Voltage (Potential) Transformers upto & including 36 KV (Outdoor Type)(Containing 26 kg 1 No. 1 CRGO Steel Laminations Sheets/ kgs Coils 1 Nickel Iron Magnetic Strips/ kgs Sheets/ Coils 2 Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes kgs 3 Electrical Grade Insulating Paper 3.30 kgs 4 Mild Steel Sheets/ Coils 5.50 kgs 5 Epoxy Resin kgs 1 No. 1 CRGO Steel Laminations Sheets/ kgs Coils 1 Nickel Iron Magnetic Strips/ kgs Sheets/ Coils 2 Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes 9.09 kgs 3 Electrical Grade Insulating Paper kgs 4 Porcelain Insulator 1 No. 5 Mild Steel Sheets/ Coils 85.8 kgs 6 Transformer Oil Litres 6 Transformer Oil Base Stock Litres 1 No. 1 CRGO Steel Laminations Sheets/ kgs Coils 1 Nickel Iron Magnetic Strips/ kgs Sheets/ Coils 2 Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes kgs 3 Electrical Grade Insulating Paper 44.0 kgs 4 Porcelain Insulator 1 No. 5 Mild Steel Sheets/ Coils kgs 6 Transformer Oil Litres 6 Transformer Oil Base Stock Litres 1 No. 1 CRGO Steel Laminations Sheets/ 8.05 kgs Coils 1 Nickel Iron Magnetic Strips/ 7.70 kgs Sheets/ Coils 2 Copper Winding Wires/ Strips/Wire Bars/ Wire Rods/ Cathodes kgs 3 Electrical Grade Insulating Paper 0.55 kg 4 Mild Steel Sheets/ Coils 3.30 kgs 5 Epoxy Resin 7.35 kgs 1 No. 1 CRGO Steel Laminations Sheets/ kgs Coils 1 Nickel Iron Magnetic Strips/ Sheets/ Coils kgs 2 Copper Winding Wires/ Strips/ 7.07 kgs C61

62 C347 C348 C349 C350 of item 1, 7 kg of item 2, 4 kg of item 3, 45 kg of item 5, 8 kg of item 6 and 30 & 36 Ltr. of item 7) XLPE Cable joint (Heat Shrinkable) size 3 X 95 mm. sq Metal Oxide gapless lightining Arrester of different rating (containing different Nos. of discs). Stainless Steel coupling/tees/elbows. Alloy Steel Rough Castings C62 Wire Bars/ Wire Rods/ Cathodes 3 Electrical Grade Insulating Paper 4.40 kgs 4 Porcelain Insulator 1 No. 5 Mild Steel Sheets/ Coils kgs 6 Epoxy Resin 8.40 kgs 7 Transformer Oil Litres 7 Transformer Oil Base Stock Litres. 1 No 1 Hot Melt Adhesive 375 gms 2 Electrolytic grade copper gms purity in Rod/ tube form 3 Self Amalgamating EPR 8 Mtrs Insulating Tape 4 Heat Shrinkable Medium Wall 250 mm Tubing size 115/34 mm 5 Heat Shrinkable Anti-Tracking 1.8 mm Weathering Insulating tubing 32/14 mm 6 Heat Shrinkable stress control 800 mm tubing 15/30 mm 7 Heat Shrinkable conducting tubing size 24/65mm 600 mm 8 Anti-tracking weathering 1 No. resistance, 3 way break out, trifurcating Gloves for H.V. Terminations (Large size) - HS 1 No. 1 Metal Oxide disc of relevant Dia dnd thickness (containing minimum 80% Zinc Oxide) 1 MT 1 Alloy Steel (Including Stainless Steel) - Bars/Rods/Plates/ Billets/Blooms 2 Consumables viz. Saw Blades/ Cutting Tools/ High Speed Steel/ Sheets/Bars/Rods/ Coils 1.00 MT 1 Major Raw Materials comprising of:a) Non Alloy Steel Melting Scrap b) Ferro Alloys comprising of: i)charge Ferro Nickel/Nickel Oxide Sinter Nickel 1 ii) Ferro Chrome iii) Ferro Manganese iv) Ferro Molybdenum Equivalent to Nos. of disc in the export product, on net to net basis MT Upto 2% of FOB value of exports kgs. 60 kgs. 24 kgs 20 kgs. 25 kgs. v) Ferro Silicon 20 kgs. 2 Additives comprising of : 5 kgs a) Core Wire/Scrap/Ingot/Shots of Aluminium b)core Wire/Lumps/Powder of Calcium Silicide(CaSi)

63 c) Selenium d) Lumps/Powder of Misch Metal 3 Miscellaneous Items: a) i) Resin Coated Sand 360 kgs. ii) Organic Binders 160 kgs. b) i) Graphite Electrode 6 kgs. C63 ii) Welding Electrode iii) Mould Wash/ Mould Coat iv) Grinding Wheel kgs kgs kgs. v) Refractories: kgs. a) Porous Plugs/Seat Blocks/Sleeves/Slide Gate plates b)direct Bonded Basic Bricks c) Monolithic/Gunning/Ramming/C astables d) Dolomite/Magnesia Carbon Bricks vi) Industrial X-Ray Film 9440 Sq. Cm. (Various Grades for Gamma Rays Iridium 192 & Cobalt 60) 4 Furnace Oil/Diesel Oil for: i) Ladle Heating ii) Mould Heating iii) Heat Treatment 212 Ltrs. Note: 1. The above norm is applicable only if s are manufactured through Electric Arc Furnace/Induction Furnace Route using melting Scrap as shown at item No. 1(a). 2. In case the products are manufactured through the Induction Furnace Route, the item 3(b)(i) will not be allowed. 3. In the case of Machined Castings, the above quantities of import items at each Sl.No. are to be Multiplied by factors as given below: a) Less than 10 kg/piece: = 1.36 b) 10 kgs. to 100 kgs/piece: = 1.25 c) More than 100 kgs/piece= 1.15 C351 Automotive Casting 1 kg 1 Steel Scrap 0.65 kg (Machined) above 100 kgs pc weight 2 Pig Iron 0.65 kg C352 Automotive Casting 1 kg 1 Steel Scrap kg (Machined) above 10 kgs. and upto 100 kgs pc 2 Pig Iron kg weight C353 Automotive Casting 1 kg 1 Steel Scrap 0.70 kg (Machined) upto 10 kgs pc weight 2 Pig Iron 0.70 kg C354 Automotive Casting 1 kg 1 Steel scrap 0.60 Kg (Rough) 2 Pig Iron 0.60 kg C355 Bright bar & Shaftings made from magnetic/ Nonmagnetic stainless steel 1 kg 1 Chrome/nickel chrome/nickel chrome Moly. Stainless Steel rounds/wire Rods/billets 2 Misc. Items : Refractory material, lubricating Oil, HSS Cutting tool/tungsten carbide tool/grinding wheel, furnace oil, anti-rust oil, coating chemicals/ 1.02 kg/kg content in export limited to 4% of FOB Value of export

64 C356 C357 C358 C359 C360 C361 Bright bars and shafting other than those made from MS and Stainless Steel Bright bars made out of mild steel Carbon Steel/Non Alloy Steel/Alloy Steel/Stainless Steel Forgings(Machined) above 10 kgs. Pc. Weight Upto 100 kg. Pc. Weight. Carbon Steel/Non Alloy Steel/Alloy Steel/Stainless Steel Forgings (Machined) above 100 kgs. Pc. Weight. Carbon Steel/Non Alloy Steel/Alloy Steel/Stainless Steel Forgings (Machined) Upto 10 kgs. Pc. Weight. Carbon Steel/Non Alloy Steel/Alloy Steel/Stainless Steel Forgings (Rough) C64 picking inhabitors, die steel 1 kg 1 Alloy Steel Non-Alloy steel Billets/ Rounds/ Wire Rods 2 Misc. Items : Lubricant Oil HSS cutting tools, grinding wheels, furnace oil, Anti-rust Oil/ ceating chemicals/ Picking Inhabitors 1 kg 1 MS Rounds/MS Bars/Rods/ Billets 2 Misc. Items : Lubricant Oil HSS cutting tools, grinding wheels, furnace oil, Anti-rust Oil/ ceating chemicals/ Picking Inhabitors 1 kg 1 Forging Quality Crabon Steel/Non-Alloy Steel/Alloy Steel/Stainless Steel Bars/Rods/Billets/Blooms/Ingots (Relevant Materials) 2 Chemicals: Rust Preventing Oil/Primer/ Paints 3 Misc. Items : Refractory material, Die Steel/Die Blocks, Cutting Tools, Cutters, Sawing Blades, including bimetallic bandsaw blades steel shots, fuel oil, heat treatment chemicals, quenching oil, and lubricants 1 kg 1 Forging Quality Carbon Steel/Non-Alloy Steel/Alloy Steel/Stainless Steel Bars/Rods/Billets/Blooms/Ingots (Relevant Material) 2 Chemicals Rust Preventing Oil/Primer/ Paints 3 Misc. Items : Refractory material, Die Steel/Die Blocks, Cutting Tools, Cutters, Sawing Blades, including bimetallic bandsaw blades steel shots, fuel oil, heat treatment chemicals, quenching oil, and lubricants 1 kg 1 Forging Quality Carbon Steel/Non-Alloy Steel/Alloy Steel/Stainless Steel Bars/Rods/Billets/Blooms/Ingots (Relevant Material) 2 Chemicals Rust Preventing Oil/Primer/ Paints 3 Misc. Items : Refractory material, Die Steel/Die Blocks, Cutting Tools, Cutters, Sawing Blades, including bimetallic bandsaw blades steel shots, Relevant Fuel Oil, heat treatment chemicals, quenching oil, and lubricants 1 kg 1 Forging Quality Carbon Steel/Non-Alloy Steel/Alloy Steel/Stainless Steel Bars/Rods/Billets/Blooms/Ingots (Relevant Material) 1.02 kg/kg content in export upto 4% of FOB Value of export 1.02 kg/kg content in export Upto 4 % of FOB value of export kg/kg content in export Limited to 1% of FOB Value of export Limited to 4% of FOB Value of Export Kg/kg content in export Limited to 2% of FOB Value of export Limited to 4% of FOB Value of export kg/kg content in export Limited to 2% of FOB Value of export Limited to 4% of FOB Value of export kg/kg content in export 2 Chemicals Rust Preventing Limtied to 2% of

65 C362 C363 Casing Pipes conforming to API, Specification 5CT or equivalent of OD 114 mm to 508 mm (4 and 1/2" to 20") made of (a)seamless Steel Pipes C65 Oil/Primer/ Paints 3 Misc. Items : Refractory material, Die Steel/Die Blocks, Cutting Tools, Cutters, Sawing Blades, including bimetallic bandsaw blades steel shots, Relevant Fuel Oil, heat treatment chemicals, quenching oil, andlubricants FOB Value of export Limited to 4% of FOB Value of export 1000 Mtrs. 1 (a)plain end Seamless Pipes (b)erw Steel Pipes of relevant 1055 Mtrs 1055 mtrs. dia and grade as the case may be 2 Plain end Seamless coupling 28 Mtrs stock 3 Finished Thread inserts 30 Sets (b)erw Steel Pipes 4 Cross Overs Net to net with accountability in the upto a maximum of 5 Nos. Cast Iron Spun Pipes 1 kg 1 Ferro silicon kg 2 Pig Iron kg C364 Cast Iron Wheel 1 MT 1 Pig Iron 1.1 MT C365 Cold Rolled painted/ 1 MT 1 Hot Rolled steel/strips/coils 1.20 MT coated High Tensile steel 2 Paint (water based) PU base/zinc 10 ltrs strapping base C366 Drill Pipes of OD mm to mm OD equipment to 2-3/8" OD to 6-5/8" OD C367 C368 C369 File Blanks (made of Alloy Steel) Forged Crankshaft (Made of Alloy/Non-Alloy Steel) Forged-Rolled Carbon Steel Tyres for Railway, Carriage and Wagon, Locomotive & Tramcar 1000 Mtrs. 1 Plain end Seamless pipes of relevant Dia 2 Tool Joint Forgings/ Plain and Hollow Bar Tool Joint Blank 1020 Mtrs 121 pairs (on net to net basis) 3 Coating material (Optional) 115 Gallons (on net to net basis) 4 Hard Banding Material, such as, Tungsten Carbide, ARMAC - M ARNCO 200 XT (Optional), TCS 8000, TSS Titanium MT (on net to net basis) 5 Tube Metal (Optional) 32 kgs (on net to net basis) 1 kg 1 Profiles/Bars and Rods of Alloy Steel (excluding Stainless Steel) 1 No. with specified weight 1 Alloy/Non-Alloy Steel Bars/Rods/Billets/Blooms/Ingots carbon (Non Alloy) steel (only relevant steel required is to be allowed i.e. against Alloy Steel product, Alloy steel and against Non-Alloy steel product,to be allowed 2 Miscellaneous Items: Rectangular Die Steel Blocks and Die Steel Rounds 1.20 kg/kg of the net content in export product kg/kg content in Upto 4% of FOB Value. 3 Furnace Oil 0.5 KL/MT of Export. 1 MT 1 Carbon Steel Billets 1.23 MT 2 Misc. Items: Die Steel/Die Blocks Cutting Tools,Cutters,Bimetallic Upto 4% of FOB value of exports.

66 C370 C371 Front Axle Beam- Forgings Galvanised Steel Stranded Wire (Wire Strand) Bandsaw Blades,Heat Treatment Chemicals 1 MT 1 Forging Quality Non-Alloy Steel/Alloy Steel in Blooms/Billets/Bars 2 Rectangular Die Steel Blocks & Die Steel Rounds 3 Relevant Consumables including consumable tools C MT MT Upto 3% of FOB Value of export 4 Furnace oil 0.5 Kilo Ltr 1000 kg. 1 Ungalvanised Wire of relevant grade of steel with or without rust preventing coating like phosphating / greasing/ waxing etc. 1 a) Wire Rod of relevant grade of steel b) Dry Drawing Lubricant/ Coating 8 kg c) Tungsten Carbide dies 5 Nos. d) Wet Drawing Lubricant 4 kg e) Lead (for Patenting) 3 kg 2 Zinc 40 kg 1.01 kg/kg content in kg/kg content in. Note: Item at Sl.No.1(d) shall be allowed only if strands are made of wet drawn wires of size 1.6mm and below. C372 Ground Rod made out of 1 MT 1 Stainless Steel Scrap 1.15 MT Stainless Steel Scrap C373 C374 High tensile precision Fastners Cold/ Hot forged Bolts/ Screws-All varieties High tensile precision Fastners Cold/ Hot 1 kg 1 Cold heading quality steel wire rods/ wires/ bars 2 Misc. Items: Thread Rolling Dies/ Knurling dies (Flat/ Cylinderical), Forming/ Cutting Tools and Tool and Alloy Steel. 1.0 kg 1 Cold Heading Quality Steel Wire Content rods/ Wires/ Bars forged Nuts-All varieties 2 Misc. Items: Taps/ Tapnibs Forming/ Cutting Tools and Tool and Alloy Steel kg Upto 5% of FOB Value 1.23 Kg Upto 5% of FOB Value Note: In case the above nuts are surface coated with Bonded Solid Film Lubricant EVERLUBE 6102-G or equivalent, the same may also be allowed to the extent of Lit/kg of " C375 Hot forged nuts 1.0 kg 1 Mild Steel/Alloy/Non Alloy Steel Rounds/Bars/Rods M S Billets MS Billets Cuttings/Bloom Cuttings/Re-Rollable Scrap 1.25 kg/kg content in kg/kg content in kg/kg content in Note : 1. In case, is galvanised, in addition to above items, an additional item - Zinc shall be 4% of net weight of export.(2)if is painted/coated, in addition relevant Paint/ Coating Powder may be allowed to the extent of 4% of the FOB value. C376 Investment Casting of Non-Alloy Steel/Alloy Steel including Stainless Steel 1000 Kgs. 1 For Non-Alloy Steel Casting: a) Carbon Steel Scrap 1310 kgs. 2 For Alloy Steel except Stainless Steel Castings

67 a) Alloy Steel Scrap 1310 kgs. b) Ferro Alloy for composition adjustment(fe-cr,fe-v,fe-mo,fe- Ni etc.) 26 kgs. 3 For Stainless Steel Castings a) Stainless Steel Scrap 1310 kgs. b) Ferro-Alloy for composition 26 kgs. adjustment(fe-cr,fe-v,fe-mo,fe- Ni etc.) 3 a) Electrolytic Pure Iron 1310 kgs. - Total ammount of Ferro Alloys b) Amount of each Ferro Alloy as per composition of Stainless Steel 3 a) Stainless Steel Scrap/Electrolytic Iron b) Amount of each Ferro Alloy as per composition of Stainless Steel (in kgs.) 2 Additives: a) Ferro Manganese/Ferro 30 kgs. Silicon/Aluminium 3 a) Waxes (Paraffin Wax/Micro 63 kgs. Crystalline Wax) b) Resin (Resin Derivatives, Tree 50 kgs. Derivatives, Hydrocarbon resin from Petroleum) c) Plastics (Polyethylene, Ethyl 13 kgs. Cellulose, Nylon, Ethylene- Vinyl-Acetate, Ethylene-Vinyl- Acrylate) d) Filler and other additives 31.4 kgs. (Polystrene, Discarboximide, Methylene Tetramine, Isophathalic Acid) 4 Material for Ceramic Shell Mould: a) Colloidal Silica/Ethyl 66 kgs. Silicate/Hybrid Binder b) Zircon/Zircon Powder/ 1034 kgs. Sand/Silica Glass/Alumina/Aluminium Silicate c) Wetting agent(sodium Alkyl 31 Ltrs. Aryl Sulphonate, Sodium Alkyl Sulphate) d) Anti Foam (Aqueous-Silicone- 21 Ltrs. C kgs X %age of Alloying elements in casting %age of Alloying element in Ferro Alloy 1310 kgs. - Total ammount of Ferro Alloys 1310 kgs. Stainless Steel Scrap X %age of Alloying elements in casting %age of Alloying element in Ferro Alloy

68 C377 C378 C379 C380 Iron Casting (Machined) above 10 kg & upto 100 kg pc wt (not elsewhere specified) Iron Casting (Machined) above 100 kg pc wt (not elsewhere specified) Iron Casting (Machined) upto 10 kg pc wt (not elsewhere specified) Iron Casting (Rough), not elsewhere specified 1 kg Content of Import Item 1 kg Content of Import Item 1 kg Content of Import Item Emulsion, Liquid Fatty Alcohol) 1 Pig Iron 1.25 kg 1 Pig Iron 1.20 kg 1 Pig Iron 1.30 kg 1 MT 1 Major Input comprising of Pig Iron/ CI Scrap/ Steel Melting Scrap 2 Low Ash Met. Cocke (Ash: Below 15%) 3 Ferro Alloy comprising of FeSi & FeMn: 4 Other inputs comprising of Fireclay and Fired silica Refractory (Bricks/ Mass), Grinding Wheel and Black Bituminous Paint 5 Packing Material (MS Round bars/ Flats/ Strips for crating and stuffing) C kg 110 kg 5 kg CIF value of all these items taken together restricted to 1% of FOB value of exports. As per packing Policy. Note: Out of the total quantity of the input permitted against item No.1 above, the quantity of steel melting scrap shall be restricted to 5% of the said total quantity. C381 Deleted C382 Manganese Steel Rough Castings 1.00 MT 1 Major Raw Materials comprising of: a) Non Alloy Steel Melting Scrap 890 kgs. b) Ferro Alloys comprising of: i) Charge Ferro Nickel/Nickel Oxide Sinter Nickel ii) Ferro Manganese iii) Ferro Molybdenum iv) Ferro Silicon 2 Additives comprising of: a) Core Wire/Scrap/Ingots/Shots of Aluminium 10 kgs. 4 kgs. 280 kgs. 20 kgs. 40 kgs kg 3 Misc. Items: a) i) Resin Coated Sand 360 kgs. ii) Organic Binders 160 kgs. b) i) Graphite Electrode 6 kgs. ii) Welding Electrode iii) Mould Wash/ Mould Coat iv) Grinding Wheel v) Refractories: a) Porous Plugs/Seat Blocks/Sleeves/Slide Gate plates b)direct Bonded Basic Bricks kgs kgs kgs kgs.

69 c) Monolithic/Gunning/Ramming/C astables d) Dolomite/Magnesia Carbon Bricks vi) Industrial X-Ray Film 9440 Sq. Cm. (Various Grades for Gamma Rays Iridium 192 & Cobalt 60) 4 Furnace Oil/Diesel Oil for: i) Ladle Heating ii) Mould Heating iii) Heat Treatment 212 Ltrs. Note: 1. The above norm is applicable only if s are manufactured through Electric Arc Furnace/Induction Furnace Route using melting Scrap as shown at item No. 1(a). 2. In case the products are manufactured through the Induction Furnace Route, the item 3(b)(i) will not be allowed. 3. In the case of Machined Castings, the above quantities of import items at each Sl.No. are to be Multiplied by factors as given below: a) Less than 10 kg/piece: = 1.36 b) 10 kgs. to 100 kgs/piece: = 1.25 c) More than 100 kgs/piece= 1.15 C383 Manhole Cover 1 MT 1 Major Input comprising of Pig 1100 kg Iron/ CI Scrap/ Steel Melting Scrap 2 Low Ash Met. Cocke (Ash: 110 kg Below 15%) 3 Ferro Alloy comprising of FeSi & FeMn: 5 kg 4 Other inputs comprising of Fireclay and Fired silica Refractory (Bricks/ Mass), Grinding Wheel and Black Bituminous Paint 5 Packing Material (MS Round bars/ Flats/ Strips for crating and stuffing) C69 CIF value of all these items taken together restricted to 1% of FOB value of exports. As per packing Policy. Note: Out of the total quantity of the input permitted against item No.1 above, the quantity of steel melting scrap shall be restricted to 5% of the said total quantity. C384 Non Alloy Steel Rough Castings 1.00 MT 1 Major Raw Materials comprising of: Non Alloy Steel Melting 1360 kgs. Scrap 2 Additives comprising of: 40 kgs. a) Core Wire/Scrap/Ingots/Shots of Aluminium b)core Wire/Lumps/Powder of Calcium Silicide(CaSi) c)lumps/powder of Misch Metal d)ferro Silicon e)ferro Manganese 3 Misc. Items: a) i) Resin Coated Sand 360 kgs. ii) Organic Binders 160 kgs. 3 b) i) Graphite Electrode 6 kgs. ii) Welding Electrode iii) Mould Wash/ Mould Coat iv) Grinding Wheel kgs kgs kgs. v) Refractories: kgs.

70 a) Porous Plugs/Seat Blocks/Sleeves/Slide Gate plates b)direct Bonded Basic Bricks c) Monolithic/Gunning/Ramming/C astables d) Dolomite/Magnesia Carbon Bricks vi) Industrial X-Ray Film 9440 Sq. Cm. (Various Grades for Gamma Rays Iridium 192 & Cobalt 60) 4 Furnace Oil/Diesel Oil for: 212 Ltrs. i) Ladle Heating ii) Mould Heating iii) Heat Treatment Note: 1. The above norm is applicable only if s are manufactured through Electric Arc Furnace/Induction Furnace Route using melting Scrap as shown at item No. 1(a). 2. In case the products are manufactured through the Induction Furnace Route, the item 3(b)(i) will not be allowed. 3. In the case of Machined Castings, the above quantities of import items at each Sl.No. are to be Multiplied by factors as given below: a) Less than 10 kg/piece: = 1.36 b) 10 kgs. to 100 kgs/piece: = 1.25 c) More than 100 kgs/piece= 1.15 C385 Non-Alloy Steel - Flanges/Couplings/ C386 C387 C388 C389 1 MT 1 Non-Alloy Steel - Bars/Rods/Plates/ Billets/Blooms Tees/Elbows 2 Misc. Items viz. Saw Blades/ Cutting Tools/ High Speed Steel/ Sheets/Bars/Rods/ Coils Non-Alloy Steel Forgings Non-Alloy Steel forgings(rough) Nuts Milled from bar process Painted Slotted Angles 1.65 MT Upto 2% of FOB value of exports. 1 kg 1 Forging Quality non-alloy steel kg (with less than 0.6% carbon) in blooms/ billets/ bars 2 Rectangular die steel blocks and die steel rounds kg 3 Fuel Oil (Light diesel oil) 0.05 Kg. 1 kg 1 Non-Alloy Steel Bars/Rods/Billets/Blooms/Ingots 1.0 kg Content of Import Item 2 Relevant Packing Material & Chemicals LDPE, Rust Preventing Oil/Primer/Paints Kg./Kg. content in export Limited to 2% of FOB Value 3 Misc. Items: Limited to 2% of Refractory material Die Steel/Die FOB Value. Blocks, Cutting Tools, Cutters, Sawing Blades, including Bimetallic Bandsaw Blades Steel Shots,Fuel Oil,Head treatment Chemicals,Quenching Oil & Lubricants. 1 MS/Alloy/Non -Alloy Steel kg Rounds/Bars 1 MT 1 Hot Rolled/Cold Rolled Carbon Steel Coils/Sheets/Plates 2 Paint/Primer Top Coat and Backer Epoxy Powder 1.20 MT/MT content in export 69 Ltrs Upto 4% of FOB value of Exports C70

71 C390 C391 C392 Powrah/Hoe/Pickaxe/Kudali/Pick Mattock/ Cutter Mattock/ Trowel/Transplantor /Fork/Cultivator/Weeder/ Bulb Planter/Combination Tool made of Non Alloy Steel/ Alloy Steel (including Stainless Steel). Production tubing of OD mm to 114.3mm OD equivalent to 2-3/8" OD to 4-1/2" OD Sanitary Castings 1.0 kg 1 Non-Alloy Steel/Alloy Steel (including Stainless Steel) Round/ Billets/ Plates/ Coils C kg/kg content in. 2 Epoxy Powder 1.20 kg/kg content in Mtrs. 1 Plain end Seamless Pipes of relevant Dia Mtrs 2 Plain end Seamless coupoling 23 Mtrs stock 3 Coating material (Optional) 115 Gallons (on net to net basis) 4 Finished thread inserts 30 Sets (on net to net basis) 5 Cross Overs Net to net with accountability in the upto a maximum of 5 Nos. 1 MT 1 Major Input comprising of Pig Iron/ CI Scrap/ Steel Melting Scrap 2 Low Ash Met. Cocke (Ash: Below 15%) 3 Ferro Alloy comprising of FeSi & FeMn: 4 Other inputs comprising of Fireclay and Fired silica Refractory (Bricks/ Mass), Grinding Wheel and Black Bituminous Paint 5 Packing Material (MS Round bars/ Flats/ Strips for crating and stuffing) 1100 kg 110 kg 5 kg CIF value of all these items taken together restricted to 1% of FOB value of exports. As per packing Policy. Note: Out of the total quantity of the input permitted against item No.1 above, the quantity of steel melting scrap shall be restricted to 5% of the said total quantity. C393 Spheroidal Graphite/ Malleable/Ductile iron castings (Rough). 1. M.T. 1 Cast Iron Scrap/Pig Iron/Steel 1330 kg Melting Scrap 2 Ferro Silicon Magnesium/Nickel 40 kg Magnesium Alloy 3 Ferro Silicon/Ferro Manganese * Please see note 3. 4 Inoculant containing 20 kg strantinum/barium/calcium/zirc onium/and other rare earth materials 5 Refractory Materials: Graphite 30 kg Stopper/Ramming Mass/Basic Acidic ref sleeves/magnesite Bricks 6 Graphite Fines/Petroleum Coke 30 kg 7 Mold Coat 16 kg 8 Resin Coated Sand 160 kg

72 9 Industrial X-Ray Films 9440 Sq.Cm. Note: 1. In case of Machined Castings, the above quantities of import items are to be multiplied by factors as given below:- Machine Casting Weighing: (a) Less than 10 kg/piece (b) 10 kg to 100 kg/piece (c) More than 100 kg/piece Zinc is to be 1% of the net weight of casting, if it is electroplated if it is glavanised. * 3.Import of item 3 shall not exceed 10% of CIF Value of Licence.4. Steel Melting Scrap shall be 20% of the total requirement.5. Items 2,3 & 4 will not be allowed for export of Malleable iron Castings. C394 Stainless Steel Rough Castings 1.00 MT 1 Major Raw Materials comprising of: a) Stainless Steel Melting Scrap 690 kgs. b) Iron Flakes/Pure Iron/Iron 310 kgs. Powder c) i)ferro Chrome 320 kgs. ii)charge Nickel Oxide Sinter/Ferro Nickel 1 c) i)ferro Chrome 70 Kgs C72 ii)nickel iii) Ferro Manganese iv) Ferro Molybdenum v)ferro Silicon 100 Kgs 10 kgs. 50 kgs. 20 kgs. 2 Additives comprising of : 5 kgs a) Core Wire/Scrap/Ingot/Shots of Aluminium b)core Wire/Lumps/Powder of Calcium Silicide (CaSi) c) Selenium d) Lumps/Powder of Misch Metal 3 Misc. Items: a) i) Resin Coated Sand 1250 kgs. ii) Organic Binders 160 kgs. 3 b) i) Graphite Electrode 6 kgs. ii) Welding Electrode iii) Mould Wash/ Mould Coat iv) Grinding Wheel kgs kgs kgs. v) Refractories: kgs. a) Porous Plugs/Seat Blocks/Sleeves/Slide Gate plates b)direct Bonded Basic Bricks c) Monolithic/Gunning/Ramming/C astables d) Dolomite/Magnesia Carbon Bricks vi) Industrial X-Ray Film 9440 Sq. Cm. (Various Grades for Gamma Rays Iridium 192 & Cobalt 60) 4 Furnace Oil/Diesel Oil for: 212 Ltrs. i) Ladle Heating ii) Mould Heating iii) Heat Treatment

73 Note: 1. The above norm is applicable only if is manufactured through Electric Arc Furnace/Induction Furnace Route using melting Scrap as shown at item No. 1(a). 2. In case the products are manufactured through the Induction Furnace Route, the item 3(b)(i) will not be allowed. 3. In the case of Machined Castings, the above quantities of import items at each Sl.No. are to be Multiplied by factors as given below: a) Less than 10 kg/piece: = 1.36 b) 10 kgs. to 100 kgs/piece: = 1.25 c) More than 100 kgs/piece= 1.15 C395 C396 C397 Steel backed tin based white metal (babbit) alloy bimetal strip generally confirming to SAE 12 or equivalent Deleted Thermostatic type Bimetal/Trimetal Strip of Various Grades and parts thereof 100 Kgs 1 CR Steel Kgs 2 Tin Ingots/Scraps Kgs 3 Copper Wire Bars/Cathodes/Ingots/Rods/Scra p 1.24 Kgs 4 Antimony Ingots/Scraps 2.30 Kgs 1 kg 1 Controlled Expansion Alloys: Cold Rolled Strips of maximum thickness of 1.85 mm and minimum thickness of 1.27 mm and 73 mm width a) H.E. Alloys: 1) Alloy with 20% Nickel, 6% Manganese and balance Ferrous 2)Alloy with 22% Nickel, 3% Chrome and balance Ferrous C73 3)Alloy with 72% Manganese,10% Nickel and 18% Copper. 4)Relevant Grade of Stainless Steel 5)Nickel 6)Copper b) L.E. Alloys : 1) Alloy with 36% Nickel and balance iron 2) Alloy with 42% Nickel and balance ferrous 3)Alloy with 48% Nickel and Balance ferrous 1.10 kg/kg content in 1.10 kg/kg content in 1.10 kg/kg content in 1.10 kg/ kg content in kg/ kg content in kg/ kg content in kg/kg content in 1.10 kg/kg content in 1.10 kg/kg content in C398 Cast Iron Weights 1 kg 1 Pig Iron kg C399 Alloy Steel Hack-Saw 1 kg 1 Alloy Steel Strips/Sheets/Coils 1.20 kg Blades 2 Misc. Items such as Cutters, Setting Wheels, Progressive Dye & Punch, Berkatekt Upto 2.5%of FOB value of export C400 Cast Iron Vice 1 kg 1 Pig Iron 1.29 kg/kg content in. 2 Non Alloy Steel Rounds/ Bar 1.65 kg/kg content in. 3 Alloy/Non-Alloy Steel Flat/ Plate 1.50 kg/kg content in. 4 Coal/Coke 0.15 kg/kg of export product.

74 C401 C402 C403 C404 Chisels made of forging quality carbon steel Coil spring Expander for Piston Ring (Round) Cut off Blades made out of High Speed Steel Cobalt/Non-Cobalt Grade Diamond Impregnated Segments - Big Block Cutter: Segmented Circular/ Frame saw blade dia 1600mm to 3500mm fitted with diamond impregnated segments. 5 Paints/Primers/ Solvents 10 gms/kg of export product. 6 Misc. Items: cutting tools like drills, cutters, sawing blade, bimetallic hand saw blades, steel shots, refractory bricks, heat treatment chemicals. 1 kg 1 Forging Quality carbon steel round/plates 2 Die Steel Block consumable quench oil Upto 2% of FOB value of export kg/kg in export product. Upto 2% of FOB value of export. 1 No. 1 Spring Steel Wire 1.39 kg/kg content in export. 2 Surface Activation/Cleaning Chemicals 3 Miscellaneous Items: Roller Feeds/ Coiling Tools/ Wire Guide/ Cutting Tools/ Pitch Tools/ Coiling Finger/ Nose Plier/ Wire Cutter 1 MT 1 High Speed Steel Sheets/Coils (Cobalt/Non-Cobalt Grade) Upto 5% of FOB value of export. Upto 5% of FOB value of exports 1.57 MT 1 No. 1 Industrial Dimond Powder 3.10% Synthetic 2 Cobalt Matric Powder/ Metal 103% Matric Powder/ Cobalt Metal Powder 3 Graphite Synthetic 3% of FOB Value 4 Steel Blanks- (Circular Disc/ Frame) 1 No (Net to Net basis) Percentage of raw material requirement is net weight of the Diamond impregnated Segments in the resultant product. C405 Diamond Impregnated Segments - Block Cutter- Single Blade: Segmented Circular/ Frame saw blade dia 900mm to 1500mm fitted with diamond impregnated segments. 1 No 1 Industrial Dimond Powder 2.50% Synthetic 2 Cobalt Matric Powder/ Metal 103% Matric Powder/ Cobalt Metal Powder 3 Graphite Synthetic 3% of FOB Value 4 Steel Blanks- (Circular Disc/ Frame) 1 No (Net to Net basis) Percentage of raw material requirement is net weight of the Diamond impregnated Segments in the resultant product. C406 Diamond Impregnated Segments - Multi Blade Single Spindle Tiling Cutters/ Saws/ Blades - Segmented Circular saw blade of various sizes fitted with Diamond Impregnated Segments. 1 No. 1 Industrial Dimond Powder 2.60% Synthetic 2 Cobalt Matric Powder/ Metal 103% Matric Powder/ Cobalt Metal Powder 3 Graphite Synthetic 3% of FOB Value 4 Steel Blanks- (Circular Disc/ Frame) 1 No (Net to Net basis) Percentage of raw material requirement is net weight of the Diamond impregnated Segments in the resultant product. C74

75 C407 Diamond Impregnated Segments - Slabbing and Edge Cutting: Segmented Circular/ frame saw blade dia 200mm to 850mm fitted with diamond impregnated segments. 1 No 1 Industrial Dimond Powder Synthetic C % 2 Cobalt Matric Powder/ Metal 103% Matric Powder/ Cobalt Metal Powder 3 Graphite Synthetic 3% of FOB Value 4 Steel Blanks- (Circular Disc/ Frame) 1 No (Net to Net basis) Percentage of raw material requirement is net weight of the Diamond impregnated Segments in the resultant product. C408 Diamond Impregnated Segments - Slabbing and Edge cutting Diamond Impregnated segments for circular saw dia 200 mm to 850 mm 1 Kg 1 Industrial Diamond Powder 2.20% Synthetic 2 Cobalt Matric Powder/ Metal Matric Powder/ Cobalt Metal Powder 103% 3 Synthetic Graphite 3% of FOB Value of Export Percentage of raw material requirement is net weight of the Diamond impregnated Segments in the resultant product. C409 Diamond Impregnated Segments -Other Segmented Circular Saw/Frame Saw blade not covered under items at Sl. No. 404 to No. 1 Industrial Dimond Powder 2.25% Synthetic 2 Cobalt Matric Powder/ Metal 103% Matric Powder/ Cobalt Metal Powder 3 Graphite Synthetic 3% of FOB Value 4 Steel Blanks- (Circular Disc/ Frame) 1 No (Net to Net basis) Percentage of raw material requirement is net weight of the Diamond impregnated Segments in the resultant product. C410 Diamond Impregnated Segments: Big Block Cutter Diamond Impregnated segments for circular saw dia 1600 MM to 3500 mm 1 Kg 1 Industrial Diamond Powder 3.10% Synthetic 2 Cobalt Matric Powder/ Metal Matric Powder/ Cobalt Metal Powder 103%% 3 Synthetic Graphite 3% of FOB Value of Export Percentage of raw material requirement is net weight of the Diamond impregnated Segments in the resultant product. C411 Diamond Impregnated Segments: Block cuttersingle blade Diamond Impregnated segments for circular saw dia 900 mm to 1500 mm 1 Kg 1 Industrial Diamond Powder 2.5% Synthetic 2 Cobalt Matric Powder/ Metal Matric Powder/ Cobalt Metal Powder 103% 3 Synthetic Graphite 3% of FOB Value of Export Percentage of raw material requirement is net weight of the Diamond impregnated Segments in the resultant product. C412 Diamond Impregnated Segments: Multiblade Single Spindle Tilling Cutters/ Saws/ Blades - Diamond impregnated Segmen ts of various sizes 1 Kg 1 Industrial Diamond Powder 2.6% synthetic 2 Cobalt Matric Powder/ Metal Matric Powder/ Cobalt Metal Powder 103% 3 Synthetic Graphite 3% of FOB Value of Export Percentage of raw material requirement is net weight of the Diamond impregnated Segments in the

76 resultant product. C413 Diamond Impregnated Segments: Other Diamond impregnated segments not covered under items at Sl.Nos. 408,410 to Kg 1 Industrial Diamond Powder Synthetic 2.25% 2 Cobalt Matric Powder/ Metal Matric Powder/ Cobalt Metal Powder 103% 3 Synthetic Graphite 3% of FOB Value of Export Percentage of raw material requirement is net weight of the Diamond impregnated Segments in the resultant product. C414 Drop forged Pliers of Alloy/ Non-alloy steel 1 kg 1 Alloy/Non-Alloy Steel Flats/Plates 2 Rigid PVC Granules for PVC Sleevings 3 a) Die Steel Blocks/ Die Steel Plates b) Misc. Items/cutting tools like highchromium steel bars, milling cutters, quenching oil, hydraulic oil 2 kg/kg in the export product kg/kg conent in Upto 5% of FOB value of export. C415 Hacksaw Frame 1.0 kg 1 H. R. Non Alloy Sheet/Flats 1.10 kg/kg content in. C416 Hand Drill 1.0 kg 1 Non-Alloy Steel rounds 1.10 kg/kg content in. C417 C418 C419 C420 High Speed Steel Square, Rectangular and Round Cobalt & Non-Cobalt Grade Tool Bits of Cross Sectional Area less than or equal to 150 mm2 High Tensile precision Industrial Wrenches/Socket kays of different cross section. Jigsaw Blades/ Sabresaw Blades/Body Saw Blades PCB Drills made from composite blanks of stainless steel and Tungsten Carbide of Drill Diameter, 0.05 MM to 1.5 MM with shank dia of MM and overall length of MM 1 MT 1 High Speed Steel Cobalt bearing and Non Cobalt Bearings Square Rectangular and Round bars 1 kg 1 Bright cold drawn Alloy Steel Bars/Coils of similar Cross Section. 1 kg 1 Relevant High Speed Steel Strips/Bimetal Strips 1000 Nos. 1 1 a) Composite Blanks of Stainless Steel and Tungsten Carbide with Dia / MM, Pin Dia / MM and Length 39+ / MM Stainless Steel shank of dia / and 28+ / - 2 MM overall length 1.25 MT 1.10 Kg 1.57 kg 1050 Nos Nos. 1 b) Tungsten Carbide pin of dia / and / - 2 MM overall length Nos. 2 Flute Grinding Diamond Wheel, Marking Solution and Ultrasonic Solution C76 Upto 5% of FOB Value. C421 PCB Drills of Solid 1000 Nos. 1 Solid Tungsten Carbide Blanks 1050 Nos.

77 C422 Tungsten Carbide of diameter 0.05 MM to 1.5 MM and with shank diameter of MM and overall length of mm Pipe Wrenches Dia / MM x Length 39+ / MM 2 Flute Grinding Diamond Wheel, Marking solution and Ultrasonic Solution C77 Upto 5% of FOB Value. 1 kg 1 Non-Alloy Steel Plate/ flats/ Bars 1.84 kg/kg content in. 2 a) Die Steel Blocks/ Die Steel Rounds b) Misc. Items/ Cutting tools like broches, drills, grinding wheels, belts, hand saw blades, quenching oil Upto 5% of FOB value of export. C423 Punches 1.0 kg 1 Non-Alloy Steel round 1.10 kg/kg content in. C424 Scissors 1 kg. 1 CRCA Sheet kg C425 C426 C427 Screw Drivers (Nickel plated) Spanners made of alloy/ Non-alloy steel Stainless Steel Rules of variety 'x' (manufactured by photo chemicals machining process) 1 kg. 1 Non-Alloy Steel Round 1.10 kg/kg content in. 2 Nickel kg 1 kg 1 Alloy/Non-Alloy Steel Plates/ Flats/ Bars 1.85 kg/kg content in. 2 Nickel 0.97% of the net weight of export product to be plated. 3 a) Die Steel Blocks/ Die Steel Rounds b) Misc. Items: Cutting Tools like Broaches, Drills, Grinding Wheels, Belts, Hand Saw Blades, Quenching Oil 4 Electroplating Salts and Additives, Like Brighteners, Carriers, Buffering agents, Leveling agents, Filter aids, Purification aids,stabilizers, complexers etc. 1 kg 1 CR Stainless Sheets/Coils of variety `x' C428 Steel files of Alloy Steel 1 kg 1 Profiles/ bars and rods of Alloy steel (excluding stainless steel) C429 C430 C431 Steel files of High Carbon Steel Steel Tapes/Rules (1 mtr. to 50 mtrs.) Steel Vices Upto 5% of FOB value of export. Upto 10% of FOB value of export kg 1.25 kg 1 kg 1 Profiles/ bars and rods of high 1.25 kg carbon (Containing 0.6% or more carbon) 1 kg 1 Carbon Steel sheet/ Coil/ Strip 1.10 kg/kg content in 2 ABS Copolymer 1.05 kg/kg content in export 3 Spirit level vials (to be allowed Net to net only when fitted in the resultant product) 1 kg 1 Non Alloy Steel Plate/ Flat/ Bar 1.65 kg/kg content in. 2 Non Alloy Steel Round/ Bar 1.65 kg/kg content in.

78 C432 Automatic Socks Knitting Machine (Mechanical) 3 Paint/ Primer/ Solvent 10 gms./kg of export product. 4 a) Die Steel Block b) Misc. items: Cutting tools like drills, milling cutters, sawing blade, bimetallic hand saw blades, steel shots, welding electrode, heat treatment chemicals 1 No. 1 Control Box for Socks Knitting Machine C78 Upto 5% of FOB value of export. 1 No. 2 Electric Motor 1 No. 3 Actuator 3 Nos. 4 Proxmity Switch 2 Nos. 5 Threads Cutter 1 No. 6 Aspirator 1 No. 7 U. Tube 1 No. 8 Air Valve 1 No. 9 Air Filter 1 No. 10 Needle Protector 2 Nos. 11 Connector 1 No. 12 Needles 325 Nos. 13 Ejector Box 1 No. 14 Bearing 8 Nos. 15 Knitting Elements: a) Sinker 325 Nos. b) Jacks 325 Nos. c) Hooks 325 Nos. 16 High Carbon High Chromium 45.5 kgs. Bar 17 Alloy Steel Bar EN 36 Grade 45.5 kgs. C433 Card Wires 1 kg 1 High Carbon Steel Wire Rods Kg C434 Circular Knitting Pins 1 kg 1 Aluminium Rod/Wire 1.05 kg/kg content in (Aluminium). C435 Computerised Automatic Power Socks Knitting Machine 2 Nylon Monofilament Yarn of relevant denier (Relevant Nylon Grade in export i.e. 6 or 66 to be allowed) 1.05 kg/kg content in export. 3 PVC Sheeting Net to net. 1 No. 1 Electronic Control Box for Socks 1 No. Knitting Machine 2 Counting Unit (Encoder) 1 No. 3 Electric Motor 1 No. 4 Actuator 4 Nos. 5 Cylinder for Main Drum 2 Nos. Movement with Pipeline and Connector Complete 6 Proxmity Switch 2 Nos. 7 Cylinder for yarn finger with 20 Nos.

79 C436 Contour Tape pipeline & connector complete 8 Oil Lubricator 1 No. 9 Thread Cutter 1 No. 10 Aspirator 1 No. 11 U. Tube 1 No. 12 Air Valve 1 No. 13 Air Filter 1 No. 14 Needle Protector 2 Nos. 15 Fixed Guard yarn 40 Nos. 16 Rotating Guard Yarn 10 Nos. 17 Connector 1 No. 18 Needles 325 Nos. 19 Ejector Box 1 No. 20 Bearing 8 Nos. 21 Knitting Elements: a) Sinker 325 Nos. b) Jacks 325 Nos. c) Hooks 325 Nos. 22 High Carbon High Chromium Bar 45.5 kgs. 23 Alloy Steel Bar EN 36 Grade 45.5 kgs. 24 Floppy Disc unit 1 No. 1 kg 1 CRCA Steel Sheet/Coil in 0.3 mm and 0.45 mm thickness 0.53 kg 2 Carbon Black 0.04 kg 3 Rubber Chemicals (Accelerator and Zinc Oixde) 0.02 kg C437 Cylinder Wires 1 kg 1 High Carbon Steel Wire Rods Kg C438 Doffer Wires 1 kg 1 High Carbon Steel Wire Rods Kg C439 ENDCAP 1.0 kg 1 Non-Alloy Steel rounds/hr Sheet/Plate 1.10 kg/kg content in. C440 Flat Tops 1 kg 1 High Carbon Steel Wire Rods 1.02 kg/kg content in C441 Hydraulic End Cap 1.0 kg 1 Non-Alloy Steel rounds/hr Sheet/Plate C442 Hydraulic Press 1 No. 1 Relevant Components for assembly of Machine C443 Injection moulding machine parts: Deckel /Cover 1.0 kg 1 Non-Alloy Steel rounds/hr Sheet/Plate C444 Injection Piston 1.0 kg 1 Non-Alloy Steel rounds/hr Sheet/Plate C445 Lincker-in-Wires 1 kg 1 High Carbon Steel Wire Rods kg C446 1 No. Any and /or all following items which are actually required in : Plastic Extrusion Plants & Machineries Rigid PVC & HDPE Pipe Plant, Bag Maker Machine, 1.10 kg/kg content in. Net to net kg/kg content in kg/kg content in. 1 Plastic Bearing 102/100nos. content in. C79

80 Film Plants such as PP/HM/HDPE/LD/LLD/ PVC Film Plant, Tape Plant, LD Foam film Plant, Extrusion Plant, Single Screw Plant, Mixer, Cooler, PVC Wire & Cable/Spring coating plant with/without caterpillar, Single spindle, torque motor winder with/without Dies, Three layer plant, waste Recycling plant, twin screw pipe plant, pipe corrugator plant, pelletising plant, box strapping monofilament, fabrilating plant, casing & caping plant, profile making plant,reprocessing/lamina tion/vented Extrusion Plant. 2 Photo Cells 102 Nos/ 100 Nos. content in export product. 3 Round Belt 102 Nos/ 100 Nos. content in export product. 4 Teflon Adhesive Tape 105 Meter/ 100 Meter content in export product. 5 Energy Regulator Net to Net. 6 Melt Pressure Transducer Net to Net. 7 Electro Modules (clutch brake Net to Net. modules) 8 Roraty Union Net to Net. 9 Various bearing such as Ball Net to Net. Bearing, Cylin- Drical Roller Thrust Bearing, Tandem Bearing, Slewing Bearing, Needle Roller Bearing, Cylinderc Roller Thrust Bearing etc. 10 T Die for Films/ Sheets Net to Net. 11 Machine Knief/ Ring String Net to Net. Cutters 12 Nylon Tube 110 Meter/ 100 Meter content in export product. 13 Timing Belt 102 Meter/100 Meter content in export product. 14 Deltron Rod 102 Nos/100 Nos content in export product. 15 Micro-Switches Net to Net. 16 Hopper-Autoloader Net to Net. 17 Float-Switches Net to Net. 18 Extruder Thrust Box Net to Net. 19 Gravimetric Mass through put Net to Net. recording (IGS) weight per meter control system (Inox Saveomat or equivalent system) 20 Compact Ball Bearing Linear Net to Net. Motion Bearing 21 Hopper Dryers Net to Net. 22 A.C./D.C Motors Net to Net. 23 Frequency Control Drives Net to Net. 24 Voltage Stabilizer/ Transformer Net to Net. 25 Thyristor Drives Net to Net. 26 Thyristor Modules Net to Net. 27 Temperature Controllers Net to Net. 28 Gear Boxes (Worm/Helical/ Net to Net. Platnetary) 29 Plumber Blocks Net to Net. 30 Flange Bearing Blocks Net to Net. C80

81 31 Thermocouples Net to Net. 32 Electrical Contactors 102 Nos./ 100 Nos. content in export product. 33 Electrical Relays 102 Nos./ 100 Nos. content in export product. 34 Moulded Circuit Breakers 102 Nos./ 100 Nos. content in export product. 35 IC'S (Intergated Circuits) Net to Net. 36 Sub-assy. OF P.C.B. Net to Net. 37 Electrical Wires & Cables 102 Nos./ 100 Nos. content in export product. 38 C.R.Defective Sheets Net to Net. 39 Alloy Steel Round Stock/Bar 105 kgs/100 kgs content product. 40 HR Sheets/Coils 105 kgs/100 kgs content in export product. 41 Aluminium/Alloy Castings Net to Net. 42 Brass Scrap 105 kgs/100 kgs content in export product. 43 Aluminium Pipe Net to Net. 44 Acrylic Cylinder Net to Net. 45 Oil Pressure Switches Net to Net. 46 Temp. Thermo Stat Switches Net to Net. 47 Slurry Pumps Net to Net. 48 Hydraulic Screen Changer Net to Net. 49 Hydraulic Powerpacks Net to Net. 50 Pneumatic Cylinders Net to Net. 51 Rodless Pneumatuc Cylinders Net to Net. 52 Solenoid Valves Net to Net. 53 Proximity Switches Net to Net. 54 Ammeters Net to Net. 55 Voltmeters Net to Net. 56 Infra Red Ceramic Heaters Net to Net. 57 Cartridge Heater Net to Net. 58 Ceramic Heaters Net to Net. 59 Blowers Net to Net. 60 Loadcells 102 Nos./ 100 Nos. content in export product. 61 Limit Switches 102 Nos./ 100 Nos. content in export product. 62 HRC Fuses 102 Nos./ 100 Nos. content in export product. C81

82 63 Roller Chains 102 Meters/ 100 Meters content in. 64 Sprockets Net to Net. 65 Oil Seals Net to Net. 66 Nylon Rod & Sheets 110 kgs/100 kgs content in export product. 67 Semi Conductor Fuses 102 Nos./ 100 Nos. content in export product. 68 Acrylic Sheets 110 Nos./ 100 Nos. content in export product. 69 Gaskets Net to Net. 70 Silicon Gaskets Net to Net. 71 Expanded PTFE Gaskets Net to Net. 72 Pneumatic Fittings Net to Net. 73 Polyurthene Tubings 105 Meters/ 100 Meters content in. 74 Airlifter Cum Regulator Assy. Net to Net. 75 Air Expanding Reel Shaft Assy. Net to Net. 76 Neoprene/Hiplon/ Silicon Net to Net. Rubber Rollers 77 Mirror Finish Chrome Plated Net to Net. Chilled Roll 78 Fabrillitting Rollers Net to Net. 79 Needle Pin 102 Nos./ 100 Nos. content in export product. 80 Molycoat Grease Net to Net. 81 Infra Coat Grease Net to Net. 82 Iso Flex 3000 al temp. Grease Net to Net. 83 Ring Magnets Net to Net. 84 Camshaft Net to Net. 85 Cam Follower Net to Net. 86 Yarn Guide Net to Net. 87 Star Tolerance Rings 102 Nos./ 100 Nos. content in export product. 88 Electronic Tension Controller 102 Nos./ 100 Nos. content in export product. 89 Linear Drive Unit Net to Net. 90 Embossing Wheel Net to Net. 91 Mould Blocks Net to Net. 92 Corrugator Dies & Die Heads Net to Net. 93 Track Rollers Net to Net 94 Nylon Sandwitch Flat Belt 102 Meters/ 100 Meters content in C82

83 C Low Voltage Heating Element 102 Nos./ 100 Nos. content in export product. 96 Ten Turn Potentionmeter 102 Nos./ 100 Nos. content in export product. 97 Sensors Net to net. 98 Linear Transducer/ VDO Net to net. Pressure Transducer 99 Thrust Ball Bearing Spherical Roller Bearings, Bush Bearing, Wheel Flange Rollers etc. Net to net. 100 Various Switches such as Rotary Net to net. 101 Drive such as Converters Net to net. 102 Non Alloy Round Stock/ Bar 1.05 kg/ kg content in. 103 Steel Pipe 1.02 kg/ kg content in. 104 Hydraulic Cylinder Net to net. 105 Band Heters Net to net. 106 Various Types of Seal Kits Net to net. 107 PVC Tubing 1.02 kg/ kg content in. 108 Water Filter-cum-Regulator Assy Net to net. 109 Cam Follower/ Roller Net to net. 110 Thread Guide Net to net. 111 S.S. Filter Belts Net to net. 112 Coil Net to net. 113 Encoder/ Encoder Cables Net to net. 114 Flow Meter Net to net. 115 Servo Valve Assembly/ Actuator Net to net. 116 Various Machined Mechanical Net to net. parts 117 Control Panels Net to net. 118 Extruder Screw Net to net. 119 Extruder Barrel Net to net. 120 Air Compressor Net to net. 121 Filter Elements/ Suction Filters Net to net. 122 Pressure Gauge/ Indicator/ Oil Net to net. Gauge 123 'O' Rings Net to net. 124 Thermo Meters/ Bi-Metal Net to net. Thermo Meter 125 Terminal Blocks Net to net. 126 Hose Union Net to net. 127 Universal Elbow/ Joint Net to net. 128 Accumulator Net to net. 129 Scrapper Net to net.

84 130 Programmer Net to net. 131 High/ Low Pressure Elements Net to net. 132 MMC Units Net to net. 133 Motor Protection Controller Net to net. 134 Programmable Logic Control Net to net. C447 Plates Injection cylinder kg 1 Non-Alloy Steel rounds/hr 1.10 kg/kg content in Sheet/Plate. C448 Ring Frame drafting 1 No 1 Bright Steel Bar EN Kg system 2 Free Cutting Steel 152 Kg C449 Speed Frame Drafting System 3 Nose Bar 54 Kg 4 Aluminium Rounds 20 Kg 5 Dial Gauges 2 Nos 6 Vernier Caliper 1 Nos 7 Height Gauges 2 Nos 8 CRCA Strip 557 Kg 9 MS Flat 41 Kg 10 SAE Chromium ball 154 Kg bearing steel Bar/Tube 11 Polypropylene Granules 50 Kg 12 Steel Ball Nos 13 Special Adhesive 10 Kg 14 Springs 420 Nos 15 Allen Cap. Screws 915 Nos 16 Rubber Aprons 840 Nos 17 Rubber Cots 840 Nos 18 Bearings 14 Nos 19 Diamond Crusher 1 No 1 No 1 Bright Steel Bar EN Kg 2 Free Cutting Steel Bar 50 Kg 3 Nose Bar 54 Kg 4 Aluminium Rounds 28 Kg 5 CRCA Strip 431 Kg 6 MS Flat 42 Kg 7 SAE Chromium ball 130 Kg bearing steel Bar/Tube 8 Special Adhesive 20 Kg 9 Steel Balls 20,000 Nos 10 Polypropylene Granules 40 Kgs 11 Springs 204 Nos 12 Allen Cap. Screws 129 Nos 13 Rubber Aprons 204 Nos 14 Rubber Cots 408 Nos 15 Dial Gauges 2 Nos 16 Height Gauge 2 Nos C84

85 C450 Stainless Steel Pressure Vessels made of AISI 316/L304 (Non-Magnetic) 17 Vernier Caliper 1 No 18 Diamond Crusher 1 No 1 kg 1 CRSS Sheets/ Strips/ Plates/ Coils (Non-Magnetic) AISI 316/L/ 304 Grade) (relevant grade) C kg C451 Tail Stocks made of Steel kg 1 Non-Alloy Steel rounds/hr 1.10 kg/kg content in Sheet/Plate. C452 Textile Machinery Spare parts perforated Nickel Screen 1 Kg 1 Nickel pellets/square/strips 1.08 Kgs C453 C454 Textile Spindle upper part 1 No 1 EN 1 A leaded free cutting steel Kg 2 Chromium Ball Bearing Steel Kg SAE specter 3 Aluminium Rounds Kg 4 Components : a) D Button and Spring 3 Sets b) Yarn Cutting Knife 1 No Textile spindle with insert 1 No 1 EN1A leaded free cutting Steel Kg 2 SAE Ball Bearing Steel Kg C455 Thrust housing made of Steel. C KV Surge Arresters/Lightining Arresters C Inoculant (Si %) Ca %, Al %, Fe % C458 Alloy Steel (Other than Stainless Steel) Wires (from melting scrap) 3 Aluminium Rounds Kg 4 Buttons/Springs 3 Sets 5 Complete Insert 1 No 6 Desmopan granules 1.5 gms 7 Brakes 1 No 8 Polypropylene Granules Kg 9 Poly Carbonate Kg 1.0 kg 1 Non-Alloy Steel rounds/hr Sheet/Plate 100 Nos. 1 Zinc Oxide Disc 3" Dia, GE Type 9L26 ZNW kg/kg content in. 103 Nos kgs 1 Ferro Silicon 1000 kgs 2 Ferro Silico Calcium 100 kgs 1000 kgs 1 Non alloy steel melting scrap 1200 kgs 2 Graphite Electrode 6 kgs 3 Cored wire/ lumps/ powder of calcium silicide (CaSi) 1 kgs 4 Rolls/ Tungsten carbide rings for 1.77 kgs rolling mills 5 Copper Mould Nos 6 Silico Manganese Qty in Kgs as in Formula 1) of Note 6 a) Ferro Silicon Qty in Kgs as in Formula (2) of Note 4 b) Ferro Manganese Qty in Kgs as in Formula 3) of Note 4

86 7 Refractory comprising of : 15 kg a) Zirconia/ magnesia nozzles b) Aluminium-graphite nozzles/ monoblock stoppers/ stopper heads/ stopper rods/ shrouds c) Porous plugs/ seat blocks/ sleeves/ slide gate plates d) Direct bonded basic bricks e) EBT Tubes/ mass/ bricks f) Monolithic/ gunning/ ramming mass/ castables g) Dolomite/ magnesia carbon bricks 8 Other ferro alloy(s) (Including charge/ ferro nickel/ charge chrome etc ) provided the alloying element(s) is/are actually present in the export product 9 Casting powder 2 kgs 10 Saw/ shear blade 0.01 kg 11 Copper scrap/ Copper 0.04 kg Cathode/Copper Wire Bar/Copper Rods (if copper is actually present in the steel) 12 Furnace oil (For captive power plant only) 70 kgs 13 Furnace oil for oil fired reheating 50 kgs furnace in the rolling mill 14 Furnace oil for ladle heating 6 kgs 15 Lubricant (for captive power 0.65 kgs plant) 16 Low silica lime stone 100 kgs 17 Cored wire/ scrap/ ingots of aluminium 1 kg 18 Cored wire of lead/ lead shots (in 2.5 kgs case of export of lead bearing free cutting steel only) 19 Raw petroleum coke 5 kgs 20 Ceramic coated lancing pipe 1 No 21 Temperature tips 0.50 No. 22 Sampler tips 0.25 No. 23 a) Dry drawing lubricant/ coating 8 kgs b) Wire drawing soap 7 kgs c) Tungsten carbide dies 5 No d) Wet drawing lubricant/ coating 4 kgs e) Plastic bobbins/ spools 300 Nos C86 Qty of each ferro alloy in kg as in formula (iv) of note 4 Note: 1. The above norms is applicable only if (s) is manufactured through electric arc furnace route/ induction furnace route using steel scrap as basic raw material. 2. Value of consumable item at Sl.No 2, 4, 5,7 (a to g) 9,19,20,21,22,23 (a to e) shall not excced 25% of the total CIF value of the licence. 3. In case the product(s) is manufactured through induction furnace route, the item at Sl.No.(2) will not be

87 allowed. 4. (i) 5.50 X(mean average of % manganese content+mean average of % Silicon content in Steel) (ii) 1100 X (mean average of % Silicon content in Steel)divided by (mean average of % siliconcontent in ferro silicon). (iii) 1100 X (mean average of % Manganese content in steel) divided by(mean average of % Manganese content in ferro manganese) (iv) 1100 X (Mean average of % alloy content in steel)devided by (mean average of% alloy content in respective ferro alloy. 5. Import of Items at Sl.No.23(d to e) would be allowed against export of wire below 1mm only C459 Alloy Steel (other than Stainless Steel, Exhaust Valve Steel and High Speed Steel) Semi finished Products (Blooms, Billets and Slabs) and Ingots 1 Tonne 1 Major Inputs: a) Non-alloy Steel Melting Scrap, Pig Iron, Sponge Iron including Hot Briquetted Iron (HBI) 2 Additives (Ferro Alloys/Metals/Compounds): a) i)ferro Silicon (Si : 75%) 1.70 a) ii) Ferro Manganese (Mn : 75%) 1.43 a) i) Ferro Silicon (Si : 75%) 1.46 a) ii) Silico-Manganese (Mn : 65% 1.65 & Si : 15%) b) Charge Chrome, High Carbon 1.79 Ferro Chrome (Cr : 60%) Low Carbon Ferro Chrome (Cr : %) c) Unwrought Nickel (Ni : 99%) 1.04 Ferro Nickel, Nickel Oxide 2.58 Sinter (Ni : 40%) d) Lead (Pb : 99%) Scrap/ Shots/ 1.60 Wires/ Powder in cored wire e) Ferro Molybdenum (Mo : 65%) 1.58 Molybdenum Oxide (Mo : 60%) 1.89 f) Ferro Titanium (Ti : 70%) 2.43 g) Ferro Tungsten (W : 75%) 1.38 h) Any other Nobel/Special Ferroalloys 1.38 (Ferro Vanadium, Ferro Boron, Ferro Phosphorous, etc.) I) Any other metal (not present in 1.04 aforesaid ferro-alloys/metals) in unwrought or wrought form or in powder form in cored wires j) Sulphur stick/sulphur powder in cored wire Consumables / Misc. Inputs: In Kgs a) Graphite Electrodes (For EAF Furnace Only) b) Relevant Cl, Steel Rolls for Hot Rolling Mill/Continuous Casting Machine c) Relevant Copper lined Moulds, Copper Moulds for Continuous Casting (if is C87 In kg. as per Note 2. In kg. per kg content of alloying element in

88 produced through Continuous Casting route with/ without further rolling) d) Casting Powder 1 e) Aluminium wires, Notched bars, 1 scraps, shots, ingots, Dross, Powder in Cored Wire and Ferro Aluminium f) CaSi Lumps, CaFe Lumps, 0.1 Powder of CaFeAl/ CaFe /CaSi in Cored wire g) Metallurgical Coke (Nut, Pearl, 20 Fines) h) Raw / Calcined Petroleum coke 4 I) Rolling Mill Oil, Hydraulic Oil, 0.5 Lubricating Oil j) Celox Inserts, Temperature Tips, 0.1 Oxygen Probes, Sampler Probes, Sampler Tips k) Relevant Shear Blades, Saw 0.01 Blades l) Oxygen Lance pipes, Submerged 0.1 tuyers, Atmospheric injector m) Calcium Carbide 0.5 n) Low silica lime stone/ Calcined lime o) Refractories : i ) Relevant shaped Refractories (Fired/Un-fired Bricks/Shapes) ii) Relevant Monolithic Refractories (including Castables, ramming mass, gunning mixes) iii) Relevant Special Refractories i.e. C.C refractory (Shrouds, Mono Block Stopper, SE Nozzles), Slide Gate refractory, Porous Plug, Zircon/ Zirconia Nozzles & Tundish Nozzles 4 Energy Sources: a) Relevant fuel for electric power K. Cal for Steel making and Auxiliaries (for units with captive power plant/source only) b) Relevant Lubricant for captive 1 kg power plant c) Relevant fuel for fuel fired reheating K. Cal furnace (if & only if is supplied in rolled condition) d) Relevant fuel for electric power for hot rolling mill & auxiliaries (if & only if is supplied in rolled condition) K. Cal e) Relevant fuel for ladle / tundish / K. Cal ferro-alloy heating Note: 1. This norm is applicable for manufactured adopting Electric Arc Furnace/ Electric C

89 Induction Furnace using Non-alloy Steel Melting Scrap as the basic input with Sponge Iron/HBI and Pig iron as partial substitutes. Note: 2. The total quantity of items allowed against Sl. No. 1 (a) shall be limited to 1115 Kg. minus the quantity of ferro alloys/ metals/ compounds allowed against Sl. No. 2 further, individual quantity of Pig Iron and Sponge Iron/ HBI allowed against Sl. No. 1 (a) shall not exceed 20% and 65% respectively of the total quantity of items to be permitted therein in line with Note 1 above. Note: 3. Quantities of Ferro Alloys/Metals/Compounds have been worked out based on a specified percentage of alloying element in the Ferro Alloys/Metals/Compounds as indicated therein within the parentheses against each alloy. If the percentage of alloying element in the ferro-alloy is higher/ lower, the revised (i.e lower / higher) quantity may be worked out on pro-rata basis as under: Quantity permitted in norm x % of element in ferroalloy/metal/compound as per the norm Actual % of element in the imported ferroalloy/metal/compound Note: 4. For a given alloying element in steel, wherever two alternate ferroalloy / metals / compound of the same alloying element have been permitted and it is proposed to import a combination of both, individual quantities of each ferro-alloy may be worked out based on the specified (part) quantities of the alloying element in two forms (but within the overall quantity of alloying element in the steel), using the content based formula given therein. Note: 5. Alloying element(s) in steel is/are prescribed by specifying the minimum value or a range or the maximum value. For calculating the quantities of ferro alloys/ metals/ compounds as per the content based formula given in the SION, the prescribed minimum or the mid value of the range or 0.8 times the maximum value of the respective alloying element(s) in shall be taken into consideration. Note: 6. In case import of alloy steel melting scrap of known chemical composition is resorted to, quantity of respective ferroalloy/metal/compound to be allowed will reduce to account for the recoverable alloying element (s) (Nickel, Copper, Chromium, Molybdenum and Manganese) in the scrap. The reduced quantity of each ferroalloy/metal shall be obtained by deducting the equivalent quantity of ferroalloy/metal to be obtained using the following formula from the total quantity as per SION read with Note 3: Alloy Steel Scrap Quantity (kg) x % of relevant element in scrap x % of relevant element in ferroalloy/ Metal / compound Ferro alloys/metals/compounds of elements other than that of Nickel, Copper, Chromium & Manganese shall be allowed as per the content base formula given therein without any reduction. Note: 7. The specified quantities of energy sources/ fuel for electric power generation (in K. Cal ) against import item 4 (a) & 4 (c) which correspond to electric power consumption of 500 and 100 KWH per tonne of have been allowed assuming that Captive Power Plant (CPP)/Source of matching capacity exist. In case CPP in a given unit is of lower capacity, quantity of fuel to be allowed for import will be reduced on pro rata basis. Note: 8. Quantity of energy sources / fuels (in K. Cal) correspond to a fuel having unit heat value of 8700 K. Cal/Kg. Import of any other fuel of higher/lower unit heat value (as long as it is relevant to the facilities installed in the unit) may be permitted, quantity of which (in Kgs./ Cubic Meters/ K. Liters) may be worked out by dividing the K. Cal figures given in the SION by the actual unit heat value of the imported fuel. Note: 9. Import of items at Sl. No. 3(b), (c), (d), (i), CC Refractories under 3 (n) (iii) and 4(c) shall not be permitted against export of steel ingots. C89

90 C460 Alloy Steel (other than Stainless Steel) Bars and Rods (including Rounds, Flats, Wire Rods etc), Angles, Shapes & Sections (including Special Profiles), 1 Tonne 1 Billets/Blooms of relevant grade of alloy steel Ingots of relevant grade of alloy steel 2 CI / Steel Rolls, TC Rolls, Rings for Rolling Mill 3 Relevant fuel for fuel fired Reheating furnace. C kg 1050 kg 0.60 kg. for Billets/Blooms input 1.20 kg. for ingot inputs K. Cal. 4 Relevant Fuel for electric power generation for Hot Rolling & auxiliaries (for units with captive power plants/source only) K.Cal. 5 Relevant Shear Blades, Saw 0.01 kg Blades Note 1. The quantity of energy sources/ fuel for electric power generation (i.e K. Cal) which is based on a power consumption norm of approx. 100 KWH per tonne of has been allowed assuming that Captive Power Plant (CPP) / Source of at least this capacity exist. In case CPP/Source in a given unit is of lower capacity, quantity of fuel to be allowed for import will be reduced on pro rata basis Note 2: Quantity of fuel for re-heating furnace (in K. Cal.) corresponds to a fuel having unit heat value 8700 K.Cal/kg. for which, 30 kg of the said fuel may be allowed. Import of any other fuel of higher / lower unit heat value (as long as it is relevant to the re-heating furnace installed in the unit) may be permitted, quantity of which (in Kgs. / Cubic Meters / K. Liters) may be worked out by dividing the K. Cal. figures in the SION by the actual unit heat value of the imported fuel. C461 Deleted C462 Alumina Carbon Bricks/Shapes and/or Ramming Mass, Castables and Mortars 1000 kgs. 1 Major Raw Materials comprising of: a) Andalusite (Alumina 56% and above) and/or i)fused and/or Sintered Alumina/Mulite (Alumina 56% and above) b) Graphite(Fixed Carbon 92% and above) and/or i)silicon Carbide c) Zircon and /or Zirconia Bubbles Grains (Zirconis Oxide 80% and above) and/or i) Ceramic Fibre Paper 2 Additives comprising of: 750 kgs 200 kgs 250 kgs a) Fume/Colloidal Silica and/or 40 kgs b) Metallic Alloys of Aluminium, Silicon, Magnesium and/or c) Phenolic Resin and/or i) Ceramic Fibre Paper d) Alumina Cemant/Binder 3 Miscellaneous Items: a) Mould and Mould Liners Upto 10% of the CIF value. b) Cutting Tools Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a), (b) in item No. 3 should not be allowed.

91 C463 Alumina Carbon Continuous Casting Refractories and/or Mortars 1000 kgs 1 Major Raw Materials comprising of: 800 Kgs a) Fused and/or sintered and/or Calcined and/or Tabular Alumina (Alumina 82% and above) and/or i) Calcined Bauxite (Alumina 82% and above) and/or ii)beta Alumi(Alumina 94% and above) and/or iii) Graphite (Fixed Carbon 85% Minimum) and/or b) Fused Zirconia (Zirconium Oxide 85% and above) and/or 400 kgs i) Silicon Carbide and/or Fused Silica and/or ii) Coating Material and/or iii) Alumina Silicate Fritt (Silicon Oxide 50% and above, Boron Oxide20% and above) and/or iv) Boron Carbide (Boron 72% and above) 2 Additives comprising of: a) Metallic Alloys of Aluminium, 80 Kgs Silicon and magnesium and /or i) Phenolic Resin 3 Miscellaneous Items: a) Moulds and Mould Liners b) Cutting Tools Note 1. In the case of export of Mortars, the misc. at item No. 3(a) & 3(b) will not be allowed. C Kgs 1 Major Raw Material comprising of: Alumina Carbon/ Slide Gate Plate Refractory and Attachments a) Fused and/or Sintered Alumina and/or Tabular (Alumina 80% and above) and/or i)calcined Bauxite (Alumina 80% and above) and/or ii)andalusite (Alumina 56% and above) b) Ceramic Fibre Paper and /or i) Carbon Black and/or Graphite and/or ii) Silica Carbide and/or iii) Micro Fine Silica 2 Additives comprising of: a) Micro/Fume/Colloidal Silica and/or b) Metallic Alloys of Aluminium, Silicon and Magnesium and/or c) Phenolic Resin 3 Miscellaneous items: C91 Upto 17 % of CIF value. 800 kgs 400 kgs 30 kgs a) Mould and Mould Liners Upto 16% of CIF value. b) Cutting Tools Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a),(b) in item No. 3 should not be allowed. C465 Alumina Fused Cast Refractories 1000 kgs. 1 Major Raw Materials comprising of: a) Calcined Alumina (Alumina 80% 1110 kgs and above) and/or b) Zircon and/or Zirconia Bubbles/ 935Kg.s

92 C466 Chrome Magnesite Bricks and Shapes and/or Ramming Mass, Castables and Mortars. Grains(Zirconium Oxide 80% and above) Baddelyet (containing Zirconium Oxide 95% and above). 2 Miscellaneous Items: a) Graphite Electrode and/or 80 kgs b) Graphite Moulds and/or c) Cutting Tools 1000 Kgs 1 Major Raw Materials comprising of: a) Dead Burnt Magnesite(Magnesium Oxide 92% & above) and /or i)sea Water Magnesia (Magnesium Oxide 94% and above)and/or 1 b) Chromite(Chromium Oxide 40% minimum)and/or i)mag Chrome Co-clinker (Magnesium Oxide 40% and above) 2 Additives comprising of: a) Micro Fine Chrome Bond and/or b)sulphates 3 Misc. Items: a)mould and Mould Liners b)cutting Tools C Kgs 520 kgs 50 Kgs Upto 10% of CIF value. Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a),(b) in item No. 3 should not be allowed. C467 Coal based Direct Reduced Iron (Briquetted Iron/ Sponge Iron) 1000 kg 1 Caliberated Iron ore having iron content 67% or above 1500 kg 2 Non coking coal having ash 800 kg content 12% or less 3 Dolomite 45 kg 4 High Alumina refractory bricks 0.5 kg 5 Castable refractory 0.12 kg 6 Briquetting moulds (those having Nos briquetting facility) 7 Light diesel oil 0.48 Lts Note:- The Value of item at Sl.Nos 4,5 & 6 shall not exceed 10% of the CIF Value of the licence. C468 Cobalt Base Hard Facing 1 kg 1 Indellite Grade 1 Alloy Wire Rods a) Cobalt 1.07 kg/kg content in b) Chromium 1.07 kg/kg content in c) Nozzles Net to Net 2 Indellite Grade 12 a) Cobalt 1.07 kg/kg content in b) Chromium 1.07 kg/kg content in c) Nozzles Net to Net 3 Indellite Grade 6

93 C469 Cold Rolled Galvanised Colour Coated Non Alloy Steel Sheets/ hoops & Strips/ Wide Coils having Zinc coating of 180 gm per Sq.M per litre Primer, 20 Sq.M per litre as Top Coat and 25 Sq.Mtr. Per litr. As Backer given in EngineeringTable 1. a) Cobalt 1.07 kg/kg content in b) Chromium 1.07 kg/kg content in c) Nozzles Net to Net 1000 kgs 1 Non Alloy Hot Rolled Steel Sheets/ Strips/ Wide Coils 1130 kgs 2 Rolling Mill Rolls 1.25 kgs 3 Rolling Oil 0.35 kg 4 Pickling Oil 0.45 kg 5 Steel Strapping 2.0 kgs 6 VCI Rusto - Paper 5.0 Sq.mtr. 7 Zinc * 8 Guard Film * 9 Paints (Ltrs.) * (a) Primer (b) Tap Coat (c) Backer * Note : While the quantity of item nos 1 to 6 will remain the same for all thickness of the product, the quantity of items 7 to 9 will be as per the Engineering Table 1 given at end of this product group. C470 Cold Rolled Full Hard/ 1000 kg 1 Non-Alloy/ Alloy Hot rolled 1085 kg Cold Rolled Close steel strips/ wide coils Annealed (without skin 2 Rolling Mill Rolls 1.25 kg passed/ temper passed) 3 Rolling oil 0.35 kg Non-Alloy/Alloy Steel (excluding Stainless Steel) 4 Pickling oil 0.45 kg Sheets/ Hoops and Strips/ 5 Steel strapping 2.0 kg Wide Coils 6 VCI Rusto Paper 5.0 sq. mt C471 C472 Cold Rolled Close annealed (CRCA) Skin Passed/ Temper passed (including Half Hard, Quarter Hard) Non- Alloy/ Alloy Steel (excluding Stainless Steel) sheets/ Hoop and Strips/ Wide coils Cold Rolled Galvanized/Galvannealed (Plain/Corrugated) Non Alloy Steel Sheets/Strips/Wide Coils kgs 1 Hot Rolled Non-Alloy/ Alloy steel strips/ wide coils 1118 kgs 2 Rolling Mill Rolls 1.25 kgs 3 Rolling oil 0.35 kg 4 Pickling oil 0.45 kg 5 Steel strapping 2.0 kgs 6 VCI/Rusto Paper 5.0 sq. mtr 1000 kgs 1 Cold Rolled Non Alloy Steel Sheets/ Strips/ Wide Coils 2 Zinc (in kgs.) * 1050 kgs/1000kgs. Content in the export product. * Note : While the quantity of item no 1 will remain the same for all thickness of the products, the quantity of item 2 will be as per the Engineering Table 3 given at the end of this product group. C473 Cold Rolled 1000 kgs 1 Hot Rolled Non Alloy Steel 1118 kgs/1000kgs Galvanized/Galvannealed Sheets/ Strips/ Wide Coils content in the export product. (Plain/Corrugated) Non 2 Rolling Mill Rolls 1.25 kgs Alloy Steel Sheets/Strips/Wide Coils. 3 Rolling Oil 0.35 kg C93

94 4 Pickling Oil 0.45 kg 5 Steel Strapping 2.00 kgs 6 VCI Rusto Paper 5.0 Sq.mtr. 7 Zinc (in kgs.) * * Note : While the quantity of item nos 1 to 6 will remain the same for all thickness of the product, the quantity of item 7 will be as per the Engineering Table 3 given at the end of this product group.the existing Engg. Table 3 shall be substituted by the Engg. Table annexed with this public notice. C474 Electrolytic Tin Plate 1 kg 1 Mild Steel Cold Rolled Wide Coil (Black Plate in Coil) Note : This norm is made effective retrospectively from C475 Ferro Chrome containing by weight minimum 60% Chromium and maximum 1.5% Carbon produced by Silico Thermic Reduction Process C476 Ferro Chrome/ Charge Chrome containing by weight more than 4% Carbon 1000 kg 1 Chrome Ore (containing 40% Minimum Chromite) C kgs 1320 kgs 2 LAM Coke/Raw Petroleum kgs Coke/Australian Char/Anthracite Coal 3 Carbon Electrode/Paste 84 kgs 4 Limestone 4000 kgs 5 Furnance Oil/LSHS/HFO 3000 kgs 6 Lubricating/Gear Oil kgs 1000 kg. 1 Chrome Ore Lumps/ Briquettes/ Pellets 1200 kg 2 LAM coke/ Raw petroleum coke/ 750 kg Australian char/anthiacite Coal(with fixed Carbon 88% Minimum & Ash content 6% maximum)/ Non Coking Coal 3 Carbon electrode/ paste 35 kg 4 Furnace oil/ LSHS/HFO * 1200 kg 5 Lubricating/ gear oil * 7.0 kg * For units having captive power plants (D.G. Set). C477 Ferro Manganese 1000 kg. 1 High grade Manganese ore 1200 kg (Fe Mn) 2 Lam Coke/ Raw Petroleum 750 kg Coke/ Australian Char/ Anthracite Coal (with fixed Carbon 88% minimum and Ash content 6% maximum)/ Non Coking Coal 3 Carbon Electrode/ paste 20 kg * For units having captive power plants (D.G. Set). C478 Ferro Molybdenum (60-65% Molybdenum C479 Ferro Silicon (Fe Si) 4 Furnace Oil/ LSHS/ HFO * 850 kg 5 Lubricating/ gear oil * 6.0 kg 1000 kg 1 Molybdic Oxide/Roasted 1104 Kgs Molybdenum Ore (Molybdenum 55-60%) 2 Ferro Silicon (Silicon 75-80%) 421 kgs 3 Aluminium Ingot/Powder kgs 1000 kg. 1 LAM Coke/ Raw Petroleum Coke/ Australian Char/ Anthracite Coal (with fixed Carbon 88% minimum and Ash content 6% maximum)/ Non Coking Coal 1400 kg

95 * For units having captive power plants (D.G. Set). C480 Ferro Vanadium (50-55% Vanadium) C481 Ferro Vanadium (75-80% Vanadium) C482 Cold Rolled Galvanised Non Alloy Steel Sheets/hoops & Strips/Wide Coils. 2 Carbon Electrode/ paste 65 kg 3 Furnace oil/ LSHS/ HFO * 2400 kg 4 Lubricating/ gear oil * 15 kg 1000 kg 1 Vanadium Pent- oxide (50-60% Vanadium) 1000 kg 1 Vanadium Pent- oxide (50-60% Vanadium) 1000 kgs 1 i)copper Cathode/Copper Wire Bar/Copper Rods (if copper is present in ) ii)copper Plates/Micro alloyed copper plate (for use in copper lined casting moulds) iii)zinc C95 iv)furnace Oil/LSHS/Naptha 2 MAJ INPUTS: 1022 Kgs 1610 Kgs 0.04 kg 0.1 kg 40 kgs 13 kgs a)non-alloy Steel Melting Scrap 330 kgs b)pig Iron c)low silica lime Stone d)coking Coal Metallurgical Coke 3 i)additives: kgs 620 kgs 1000 kgs 700 kgs a) Cored wires/scraps/ shots/ ingots kgs of aluminium b) Ferro Niobium kg c) Ferro Vanadium kg d) Ferro Silicon/Ferro Manganese/ kgs Silico Manganese/ Other ferro Alloy(s) (including Nickel Oxide sinter/ferro Nickel/charge chrome provided the alloying element(s) is/are actually present in. e) Calcium Silicide (CaSi) 1.5 kg f)raw Petroleum Coke 3 ii)miscellaneous Items: i)silicon Carbide Grains ii)rolls/tungsten Carbide rings for Rolling Mill iii)celox Inserts/Oxygen measuring probes iv)thermodynamic elements v)magnesia Reagent/ Desulphurisation Compound vi)silica Gel/Mobile Sorbead vii)freon Gas-142/114(Net of Cylinders) viii)stainless steel Hoses 2.3 kgs 2.0 kgs 1.77 kgs kg kg kg kg kg kg

96 ix)shear Blades/Saw Blade x)oxygen Lance Pipe xi)rolling Mill Oil xii)casting Powder xiii)temperature Tips xiv)canned Elements/Pearmeable elements for combined blowing xv)graphite electrodes (only those having VADR facilities) xvi)welding flux xvii)weld wire xviii)surface protection film kg kg kg kgs kg kg kg 8.00 kgs 4.00 kgs kgs xix) Refractory Bricks/ Shapes 9 kgs and/or Dead Burnt/ Sea Water/ Fused Magnesia for captive use for manufacture of Bricks/ Shapes xx) Monolithic Refractory viz. 5 kgs Castables, Gunning Mass & Ramming Mass and/or Dead Burnt/ Sea Water/ Fused Magnesia for captive use for manufacture of Monolithic Refractory xxi) Specialty Refractories 1 kg namely Continuous Cast Refractories (such as Shrouds, Mono Block Stoppers and Sub- Entry Nozzles), Slide Gate Refractories, Porous Plug, Zircon/ Zirconia Nozzles and Tundish Nozzles Note 1. The above norm is applicable only if (s) is manufactured through Blast Furnace-LD Converter/ Open Hearth/ Energy Optimising Furnace routes in the integrated steel plants. 2. Items at Sl.Nos. 3(i) (b & c) would bepermitted only if the Alloying Elements, viz. Niobium and Vanadium is present in. C483 Gas based direct reduced iron (Hot Briquetted Iron/ Sponge Iron) 1000 kgs. 1 Calibrated Iron Ore and Iron 1500Kgs. Pellets 2 Iron Ore Pellets 300 kgs 3 Liquified Petroleum Gas Furnace Oil 86 kgs 111 kgs 4 Reformer Catalyst (Alumina Ltr Magnesia based Nickel Catalyst) 5 Briquetting Moulds (only for No. those having Briquetting Facilities) 6 Refractories(80% Alumina 0.4 kg Bricks and Castables) 7 Dead Burnt Magnesite 5 kgs (Magnesium Oxide 87% and above) 8 Zinc Oxide Ltr. 9 Potassium Carborate 0.17 kg. C96

97 10 Glycine 11 Vanadium Pentoxide 12 Diathanolamine 13 Resin Ltr. 14 Tri-sodium Phosphate kg 15 Water Treatment Chemicals 0.05 kg. 2 a) Natural Gas/LNG 290SCM/213Kg respectively. b) Propane Naptha upto 20% within the total quantity of natural gas/lng upto 5% within the total quantity of natural gas/lng 1) Natural Gas/LNG 180SCM/132 Kg respectively 2) LPG or Furnace oil/naptha 91Kg. Or 108Kgs. MISC. ITEMS CONSITING OF:- 3 a) Reformer Catalyst (Alumina Magnesia based Nickel Catalyst), b) Briquetting Moulds & High temerature Grease (only for those having Briquetting facilities) c) Refractories (80% Alumina Bricks nd Castables), d) Dead Burnt Magnesite (Magnesium Oxide 87% and above), Zinc Oxide, Potassium Carbonate, Glycine, Vanadium Opentaoxide, Diathanolamine, resin, Tri-sodium Phosphate, Water Treatment Chemicals, e) Nickel-chromium based reformer tubes f) Nickel -Chromium based Heat recovery tube Bundles. Note : 1 Quantum of Iron Ore Pelletws under S.No. 1 shall be limited to 70% of the total permitted quantity. General note No. 7 shall not apply in respect of Furnace Oil in S.No. 2(ii) since it is a process necessity.import of LNG, Propane, Naphtha, LPG and Furnace Oil at S.No. 2 shall be allowed to only such Gas based directed reduced iron producers who has installed facilities to use these fuels.item at S.No. 3(d) shall be allowed only to Gas based DRI producers following HYL-III technology. 2. Import item No 3 (a) to 3 (f) in total (Misc. item) are allowed up to 4% of the FOB value of export. C484 Deleted C485 C486 Graphite electrode/ Carbon electrode/ Anodes/ Nipples/ Graphite Fine and Mix Graphite Products High Alumina (Bubble Alumina Based) Bricks & Shapes and/or Castable and Mortars 1 kg 1 Electrode grade Calcined kg Petroleum Coke/ Pitch Coke 2 Special Impregnating pitch kg 3 Coal Tar Pitch kg 4 Furnace Oil Ltr 1000 kgs. 1 Major Raw Materials comprising of: a) Bubble and/or Fused Alumina (Alumina 90% and above) and/or C kgs

98 C98 i)reactive Alumina 2 Additives comprising of: Alumino Silicate Powder and/or 200 kgs Metallic Alloys of Aluminium Silicon and Magnesium 2 a) Micro/ Fume/ Colloidal Silica 180 kgs 3 Miscellaneous Items: a) Mould and Mould Liners Upto 11% of the CIF value. b) Cutting Tools Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a), (b) in item No. 3 should not be allowed. C487 High Alumina (Synthetic Base) Bricks/Shapes and/or Ramming Mass, Castables and Mortars 1000 kgs. 1 Major Raw Materials comprising of: a) Fused and/or Sintered Alumina/Mulite (Alumina more than 73%) and/or i) Reactive Alumina (Alumina more than 73%) and/or b) Graphite(Fixed Carbon 85% Minimum) and/or i) Pitch Pellet (more than 60% Fixed Carbon) 2 Additives comprising of: a) High Alumina Cement/Binder and/or i) Micro/Fume/Colloidal Silica and/or ii) Aluminium Silicate Powder and/or iii) Metallic Alloys of Aluminium, Silicon, Magnesium and/or iv)sodium Hexameta Phosphate 3 Miscellaneous Items: 850 kgs 200 kgs 180 Kgs a) Mould and Mould Liners Upto 10% of CIF value. b) Cutting Tools Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a), (b) in item No. 3 should not be allowed. C488 High Alumina Blast Furnace Stove Bricks/ Shapes and Mortars 1000 kgs. 1 Major Raw Materials comprising of: a) Andalusite and/or i)calcined and/or Fused and/or Reactive Alumina 2 Additives comprising of: 1400 kgs a) Micro/ Fume Colloidal Silica and/or i)sodium Hexa Metaphosphate and/or ii)metallic Alumina 160 kgs 3 Miscellaneous Items: Upto 18% of CIF value. a) Mould and Mould Liners b) Cutting Tools

99 Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a), (b) in item No. 3 should not be allowed. C489 High Alumina Bricks and Shapes and/or Ramming Mass, Castables and Mortars 1000 kgs. 1 Major Raw Materials comprising of: a) Andalusite (Aluminium Oxide 50% and above) and/or i)calcined Bauxite (Aluminium Oxide 50% and above) 2 Additives comprising of: a) High Alumina Cement/Binders and/or Ligno Sulphate Micro/ Fume/ Colloidal Silica 3 Miscellaneous Items: C kgs 270 kgs 180 kg a) Mould and Mould Liners Upto 10% of CIF value. b) Cutting Tools Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a), (b) in item No. 3 should not be allowed. C490 High Alumina Refratory for Hearth 1 No. 1 Syntered Alumina Tiles Net to Net C491 High Chrome Castings 1 MT 1 High Carbon Ferro Chrome (Cr. 523 kgs for Cement Grinding 65%) Mills (Composition: 2 Ferro Molybdenum (MO) (65-47 kgs 70%) Cr.30-32%, Moly %, Si % and C- 3 Ferro Silicon (Si) 75% minimum 29 kgs %, Balance - Iron) 4 Non-Alloy Steel Scrap 479 kgs C492 High Speed Steel (cobalt grade) bars & rods/ wires/ special profiles/ flat rolled products 1000 kg 1 Ferro Molybdenum * 2 Ferro tungsten ** 3 Ferro Vanadium *** 4 Cobalt metal **** * 3330 X (mean average of % Modybdenum in steel devided by mean average of % Modybdenum in Ferro Molybdenum) ** 3330 X (mean average of % Tungsten in steel divided by mean average of % Tungsten in Ferro tungsten) *** 3330 X (mean average % Vanadium in steel divided by mean average of % Vanadium in Ferro Vanadium) **** 33 X (mean average of % cobalt in steel) C493 High Speed Steel (Non 1000 kg. 1 Ferro Molybdenum * Cobalt grade) bars & 2 Ferro Tungsten ** rods/ wires/ special 3 Ferro Vanadium *** profiles/ flat rolled products * 3330 x (mean average of % Molybdenum in steel) ( mean average of % Molybdenum in ferro Molybdenum) ** 3330 x (mean average of % Tungsten in steel) (mean average of % Tungsten in ferro tungsten) *** 3330 x (mean average of % Vanadium in steel) (mean average of % Vanadium in Ferro Vanadium) C494 Hot Metal/Pig Iron 1000 kgs 1 i)iron ore/iron Ore concentrates/ 1500 kgs Iron ore pellets having 65% or

100 C495 Hot Rolled Nonalloy/Alloy/Stainless Steel Sheets/ Strips/Wide Coils more iron ii)metallurgical Coke Metallurgical Coke Coking Coal Coking Coal iii)*pci Coal for plant having PCI injection system iv)coke Breeze v)limestone vi)dunite 2 Miscellaneous Items: i)silicon Carbide grains 2 ii)alumina/graphite/ Carbon Refractories 1 Tonne 1 Slabs of relevant grade of Nonalloy/ Alloy/ Stainless Steel Ingots of relevant grade of Nonalloy/Alloy/ Stainless Steel 2 CI/ Steel Rolls for Hot Rolling Mill 700 kgs (without PCI) 500 kgs (with PCI) 1000 kgs (without PCI) 800 kgs (with PCI) 200 kgs 20 kgs 200 kgs 50 kgs 2 kgs 0.33 kg 1030 kg 1050 kg 3 Steel Shots 5.5 kg 0.60 kg (if input is slab) 1.20 kg (if input is ingot) 4 Relevant Shear Blades/ Saw 0.01 kg Blades 5 Relevant Fuel (for fuel fired reheating furnace) K. Cal. 6 Relevant Fuel for electric power K. Cal. for hot rolling mill & auxiliaries (for units with captive power plant / source only Note 1. The quantity of fuel for power generation (i.e K. Cal.) which is based on a power consumption norm of approx. 100 KWH per tonne of has been allowed assuming that captive power plant/ source of at-least matching capacity exist. In case, the capacity of the Captive Power Plant/ source in a given unit is lower, quantity of fuel to be allowed for import will be reduced on pro rata basis. Note 2. The quantity of fuels (in K. Cal.) allowed in the SION correspond to a fuel having unit heat value of 8700 K. Cal. Import of any other fuel of higher/ lower unit heat value (as long as it is relevant to the facilities installed in the unit) may be permitted; quantity of which (in Kgs./Cubic mtr./k.ltr.) may be worked out by dividing the K.Cal. Figures given in the SION by the actual unit heat value of the imported fuel. C496 Industrial/ Sanitary Iron Castings (Blast Furnace Route) 1000 kgs. 1 Iron Ore/Iron Ore concentrates/iron Ore Pellets having 65% or more iron 2 Low Ash Metal-lurgical Coke (with Ash content below 15%) Coking Coal (with Ash content below 12%) Coking Coal (with Ash content below 12%) 1500 kgs 700 kgs 1000 kgs kgs 3 Limestone 300 kgs C100

101 C497 C498 C499 Iron Ore pellets (from Limonite Ore) Iron Ore Pellets. (from Haematite Ore) Magnesia Carbon Bricks/Shapes and/or Ramming Mass, Castables and Mortars 4 Manganese Ore 90 kgs 5 Dolomite 80 kgs 6 Oxygen Lancing Tube 10 Mtrs Kgs 1 Lime Stone/Dolomite 35 Kgs 2 Bentonite 5 Kgs 3 Grinding Media 0.4 Kg 4 Furnace Oil 40 Kgs 1000 kgs. 1 Iron Ore Fines 1000 Kgs 2 Lime Stone/ Dolomite 29 Kgs 3 Bentonite 5 Kgs 4 Chromium based grinding media 0.4 Kg having 10-18% chromium content in the steel balls of different diameters 5 Furnace Oil 37 Kgs 6 Flocculent kg 1000 Kgs 1 Major Raw Materials comprising of: a)dead Burnt Magnesite (Magnesium Oxide 92% & above) and/or i) Sea Water Magnesia (Magnesium Oxide 94% and above) and/or ii) Fused Magnesia (Magnesium Oxide 94% andabove) b) Natural Graphite (Fixed Carbon 85% Minimum) 2 Additives comprising of : a) Phenolic Resins and/or i) Metallic Alloys of Aluminium, Silicon, Magnesium. 3 Miscellaneous Items: a) Mould and Mould Liners b) Cutting Tools C Kgs 20 Kgs 120 Kgs Upto 10 % of CIF value. Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a), (b) in item No. 3 should not be allowed. C500 Magnesia Dolomite Bricks and Shapes and/or Ramming Mass, Castables and Mortars 1000 kgs. 1 Major Raw Materials comprising of: a) Dead Burnt Magnesite (Magnesium Oxide 92% & above) and/or i)sea Water Magnesia (Magnesium Oxide 94% and above) and/or b) Magdolo Co-clinker(Magnesium Oxide 40% and above) 2 Additives comprising of: Pitch Coke/ Tar Pitch 3 Miscellaneous Items: 600 kgs 450 kgs 190 kgs a) Mould and Mould Liners Upto 10% of CIF value. b) Cutting Tools Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a), (b) in item No. 3 should not be allowed.

102 C501 Magnesite Bricks and Shapes and/or Ramming Mass, Castables and Mortars 1000 Kgs 1 Major Raw Materials Comprising of : a) Dead Burnt Magnesite (Magnesium Oxide 92% & above) and/or i) Sea Water magnesia (Magnesium Oxide 94% and above) and/or ii) Fused Magnesia (Magnesium Oxide 94%and above) 2 Additives comprising of : a) Phenolic Resins and/or i)ligno Sulphate and/or ii)pitch Coke/Tar Pitch 3 Misc. Items: a) Mould and Mould Liners b)cutting Tools C Kgs 40 Kgs Upto 10% of CIF value. Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a), (b) in item No. 3 should not be allowed. C502 Magnesite Chrome/Magnesia Coclinker Bricks and Shapes and/or Ramming Mass, Castables and Mortars 1000 kgs. 1 a) Major Raw Materials comprising of: i)dead Burnt Magnesite 700 kgs (Magnesium Oxide 92% & above) and/or ii)sea Water Magnesia (Magnesium Oxide 92% and above) and/or iii) Chromite (Chromium Oxide 40% Minimum) b) Mag Chrome Co-clinker and/or i) Magnesium aluminium Coclinker or Magnesia Lime Coclinker (Magnesium Oxide 40% minimum) 350 kgs 2 Additives comprising of: a) Micro Fine Chrome Bond and/or 50 kgs b) Mettalic Alloy of Aluminium, Silicon, Magnesium 3 Misc. Items: a) Mould and Mould Liners Upto 10% of CIF value. b) Cutting Tools Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a), (b) in item No. 3 should not be allowed. C503 Magnesium Ferro Silicon 1000 kgs 1 Ferro Silicon 885 kgs. 2 Magnesium Metal 100 kgs. 3 Ferro Silicon Calcium 50 kgs. 4 Misch Metal (containing rare earths : 98% minimum) 25 kgs. Note: For import item No.4 prior permission from the Deptt.of Atomic Energy shall be obtained and submitted by the applicant alongwith the application for advance licence/ DFRC. C504 Non Alloy/ Alloy Steel Coated/ Plated Wires 1000 kg 1 Wire rod of relevant grade of Steel 1 a) Billets/ Blooms of relevant grade of steel b) CI/Steel Rolls/ Tungsten Carbide Rings/ Rolls for Rolling Mill c) Furnace Oil for captive oil fired re-heating Furnace 1.03 kg/kg content in kg/kg content in kg 30 kg

103 2 Dry Drawing Lubricant/ Coating 8 kg 3 Tungsten Carbide dies 5 Nos. 4 Wet Drawing Lubricant 4 kg.. 5 Plastic/ Steel Bobbins/ Spools Net to net. 6 Relevant Metal for coating/ Plating 45 kg 7 Lead (for Patenting) 3 kg Note: Import of items at Sl. No.4 shall be allowed against export of wet drawn steel wires of size below 1.6mm only. C505 C506 Hot Rolled Galvanized Non alloy steel Sheet/hoops & Strips/Wide Coils Non alloy steel Galvanised wire 1 kg 1 Non alloy hot rolled Steel Sheets/ 1.05 kg Coils 2 Zinc 0.04 kg 1000 kgs 1 a) Copper scrap/ingots (if copper is 0.04 kg present in ) b) Zinc 40 kgs c) Lead 3.3 kgs d) i)furnace Oil (only for units with captive power plants) ii)lubricant (only for units with captive power plant) 1 e) i)furnace oil for oil fired reheating furnace in rolling mill ii) Furnace oil for ladle heating 1 f) Cored wire of lead/lead shots (in case of export of lead bearing free cutting steel sheet only) 2 MAJ INPUTS : 30 kgs 0.65 kg 50 kgs 6 kgs 2.5 kgs a) Non Alloy steel Melting 360 kgs scrap/direct Reduced Iron (HBI/Sponge Iron) b) Low Silica Lime Stone 218 kgs c) Metallurgical Coke 610 kgs 3 i)additives a) Cored wires/lumps/powder 1 kg of Calcium Silicide (CaSi) b) Silico Manganese 16 kgs i) Ferro Silicon 6 kgs ii) Ferro manganese 10 kgs c) Raw Petroleum coke 5 kgs d) Cored wires/scrap/ingots/ shots of aluminium ii)misc. ITEMS: a)graphite Electrode b)rolls/tungsten Carbide rings for rolling mill c)copper lined mould/ Copper mould for casting 1 kg 6 kgs 1.77 kgs kgs C103

104 C104 d)saw/shear Blade e)ceramic coated lancing pipe 0.01 kg 0.25 No. f)temperature Tips/Celox inserts 0.05 No. g)sampler tips h)submerged tuyers/ Oxygen lance pipe /Oxygen Super Sonic lance /tip. i)atmospheric injector j)casting Powder 0.05 No kgs 4 kgs 2 kgs k) Silica Texture bellow Shroud kg iii)wire DRAWING MISC. ITEMS: a)dry drawing lubricant b)wire drawing soap c)wet drawing lubricant d)tungesten carbide dies e)plastic bobbins/spools iv)refracty ITEMS: a)runner Mass/castable for Mini Blast Furnace (MBF) b)graphite Carbon refractories for Mini Blast Furnace (MBF) c)magnesia reagent/ Desulphurisation compound d)zirconia /Magnesia Nozzles e)aluminium Graphite Nozzles/Monobloc Stopers/Stoper heads/ Stoper Rods/Shrouds f)porous Plugs/seat Blocks/Sleeves/Slide Gate Plates g)direct Bonded basic Bricks h)ebt Tube/Mass/Bricks 8 kgs 7 kgs 4 kgs 5 Nos. 300 Nos. i)monolithic/gunning/ Ramming Mass/Castables j)dolomite Magnesia Carbon Bricks Note 1. The above norms is applicable only if (s) is/ are manufactured through Mini Blast Furnace-Electric Arc Furnace route using liquid hot metal as the principal raw material in Electric Arc Furnace. 2. Import of item atsl.no.3 (iii) (c), (d) and (e) shall be allowed against export of wire of size below 1 mm dia only.import of Directo Reduced Iron shall be limited to 10% of total metallic input of 360Kg. Mentioned at item 2(a). C507 Non alloy steel 1000 kgs 1 Major Inputs comprising of: Galvanised Wires (From a) Non Alloy Steel Melting Scrap 1200 Kgs melting scrap) b) Low Silica Lime Stone 95 kgs 2 Additives comprising of : a) Cored Wires/ Lumps/ Powder of Calcium Silicide (CaSi) b) Silico Manganese 10 Kg

105 Or (i) Ferro silicon (ii) Ferro manganese c) Raw Petroleum Coke kgs d) Cored wires/ Scrap/ Ingots/ Shots of aluminium e) Copper scrap/ Copper 0.04 kgs Cathode/Copper wire Bar/Copper Rod (If copper is actually present in ) f) Cored Wires of lead/ Lead Shots.(in case of export of lead bearing free cutting steel only) 2.5 kg 3 Miscellaneous Items: a) Graphite Electrode b) Rolls/ Tungsten Carbide Rings for Rolling mill c) Copper lined moulds for casting 20 kg d) Saw/ Shear Blade e) Ceramic coated lancing pipe f) Temperature Tips g) Sampler Tips h) Refractory items, comprising of: C105 1) Zirconia/ Magnesia Nozzles 2) Aluminium-Graphite Nozzles/ Monoblock Stoppers/ Stopper head/stopper Rods/ Shrouds 3) Porous Plugs/ Seat Blocks/ Sleeves/ Slide Gate Plates 4) Direct Bonded basic Bricks 5) EBT Tube/ Mass/ Bricks 6) Monolithic/ Gunning/ Ramming Mass/ Castables 7) Dolomite Magnesia Carbon Bricks 8) Ladle inner Nozzles/ collector Nozzles 3 i) Casting Powder 4 Wire drawing and galvanising Misc. Items: a) Dry drawing lubricants b) Wire drawing soft c) Wet drawing lubricants 37.7 kgs d) Tungston carbide dies e) Plastic bobbins/ Spools f) Zinc 40 kgs g) Lead 3.3 kgs 5 Energy sources comprising of: a) (i) Furnace Oil (only for Units with captive power Plant) 70 kgs

106 a) (ii) Lubricant (only for units with captive power Plant) C kgs. 5 b) (i) Furnace oil for oil-fired Reheating Furnace in Rolling Mill. 50 kgs b) (ii) Furnace oil for Ladle heating 6 kgs. 1. The above norms is applicable only if (s) is/are manfactured through Electric arc furnace/ Induction furnace route using steel melting scrap as basic raw material. 2. In case the product is manufactured through induction furnace route, the item at Sl.No 3(a) shall not be allowed. 3. Import of item at Sl.No 4(c)(d)(e) shall be allowed against of export of wire below 1mm dia only. 4. The item Non Alloy Steel Melting Scrap will be allowed as per the definition given in Section XV of Customs Tariff. C508 Hot Rolled Non Alloy Steel Plates/Sheets /hoops & Strips. (including skelp)/ wide Coils through DC arc Furnace Route (for open Cycle Operation) kgs 1 a) Copper Scrap/Copper 0.04 kg Cathode/Copper Wire Bar/Copper Rod (if copper is present in ) b) Energy Sources/Fuels (Natural K. Cal Gas/LNG, NGL (Condensate/gaseous), Naptha, HSD Oil, Furnace Oil) (only for plants having captive power plant with facilities installed for use of specific energy sources/fuel) c) Energy Sources/Fuels (Natural K Cal. Gas/LNG,NGL (condensate/gaseous), Naptha, High Speed Diesel Oil, Light Diesel Oil, Furnace Oil)(for reheating furnace in rolling mills, ladle heating and tundish preheating) NGL for re-heating furnaces in 56 kgs rolling mills, ladle heating and tundish pre-heating (only for plants having facilities installed for the use of this fuel) 2 MAJ INPUTS : a)non-alloy Steel Melting Scrap/Direct reduced iron (sponge iron/hot Brequitted Iron)/ Pig Iron b)lime Stone 3 i)additives : a)cored wires/lumps/ powder of Calcium Silicide (CaSi) b)silico Manganese i)ferro Silicon ii)ferro Manganese c)raw Petroleum Coke /Calcined Petroleum Coke/Metallurigical Coke/Coke Breeze d)cored Wires/Scrap/ Ingots/Shots of Aluminium e)dolomite f)ferro Titanium/ Ferro 1111 Kgs. 200 kgs 1 kg 13 kgs 3 kgs 10 kgs 5 kgs 1 kg 40 kgs 3 kgs

107 Vanadium/ Ferro Phosphorous/ Ferro Aluminium/ Ferro Chrome/Ferro Boron/Ferro Niobium(if these are actually present in ) 3 ii)misc. ITEMS: C107 a)graphite Electrode b)rolls for Rolling Mill c)copper lined Moulds for casting d)saw/shear Blade e)ceramic coated lancing pipe f)temperature Tips g)sampler Tips h)casting Powder i)fluorspar/mould Flux j)oxygen/sampler probes k)rolls for Caster l)hydraulic Oil/ Lubricating Oil m)transformer Oil 3 iii)refracties : a)zirconia /Magnesia Nozzles b)aluminium Graphite Nozzles/Monobloc Stopers/Stoper heads/stoper Rods/Shrouds c)porous Plugs/seat Blocks/Sleeves/Slide Gate Plates d)direct Bonded basic Bricks e)ebt Tube/Mass/Bricks f)monolithic/gunning/ Ramming Mass/Castable g)dolomite Magnesia Carbon Bricks h)ladle inner Nozzles/ collector Nozzles/ Nozzle filling Mass/ Refractory Nozzles i)reheating Furnace Refractories j)black Refractories k)roof Refractories l)tundish Refractories m)tundish Gunning Mass n)tundish Powder o)purging Refractories 4 kgs 1.2 kgs kg 0.1 kg 0.02 No. 0.1 No. 0.5 No. 2 kgs 1.5 kgs No. 0.5 kg 1.7 kgs 0.59 kg 25.8 kgs Note 1.This norm is applicable for manufactured through DC Electric Arc Furnace Route for open cycle operation. Note 2. Items at Sl.No. 3(i) (f) i.e. Ferro-Titanium/Ferro Phosphorous/Ferro Chrom/Ferro Boron/Ferro Niobium will be allowed if these are actually present in. Note: 3 Import of either one or a combination of the energy sources /fuels mentioned against Sr. Nos. 1 (ii)

108 & 1 (iii) shall be permitted within the overall calorific value, subject to further actual user condition. Note : 4 Quantity of specific fuel (s) in kgs/cubic meter/k.ltr shall be obtained by dividing the K.Cal figure by the net calorific value/heal value of the fuel (s) detailed below:-net Caloric values of fuels 1. Natural Gas -8400K.Cal/Cubic Mtr. 2. LNG-11436K.Cal/Kg 3. Naptha-10610K.Cal/Kg 4. NGL-10610K.Cal/Kg 5. LDO-10060K.Cal/Kg 6. F.O.-9790K.Cal/Kg 7. HSD-10230K.Cal/Kg Note : 5. Deleted Note : 6 Import of Direct Reduced Iron shall be allowed up to 90% of the total metallic input of 1111 kgs Note : 7 Import of Pig Iron may be allowed upto 10% of the total metallic input of 1111 kgs. C509 Non alloy Steel Plates 1 kg 1 Non alloy Steel Slabs 1.10 kg C510 Non Alloy/ Alloy Steel (Excluding Stainless Steel) Wires (Uncoated) 1000 kgs 1 Wire rod of relevant grade of steel 1030 kgs 2 Dry Drawing Lubricant/ Coating 8 Kgs 3 Tungsten Carbide Dies 5 Nos. 4 Wet Drawing Lubricant 4 kg. 5 Plastic/ Steel Bobbins/ Spools Net to net. Note: Import of Items at Sl.No. 4 shall be allowed against export of wet drawn steel wires of size below 1.6mm only. C511 Non alloy/ Alloy/ stainless steel Bars and Rods (including Rounds, flats, Hexagon, octoagon, wire rod, cold twisted deformed bars, thermomechanically treated reinforcing Bars etc.) Angles, Shapes and Sections (including Beams, Joists,Channels Special Profiles etc. ) Plates/ sheets/ strips/ wide coils/ Blooms/ Billets/ Slabs and Ingots 1000 Kgs 1 Calibrated Iron Ore with 65% and more Iron content C108 (a) 690 Kg for stainless steel (b) 1250 Kg for other steel 2 Non alloy steel melting scrap (a) 200 Kg for stainless steel (b) 360 Kg for other steel 3 Liquefied Petroleum Gas 76 Kgs 4 Reformer catalyst 0.06 Lts 5 Briquetting moulds Nos 6 Non coking coal (with ash 850 Kgs content less than 12%) 7 Graphite Electrode 6 Kgs 8 Cored wire/ lumps/ powder of calcium silicide (CaSi) 1Kg 9 Rolls/Tungston Carbide rings for 1.77 Kgs rolling mills 10 Copper Mould Nos 11 Silico Manganese (Qty. in Kgs as in formula 1 of note 7) 11 a) Ferro Silicon (Qty. in Kgs as in formula 2 of note 7) b) Ferro Manganese (Qty. in Kgs as in formula 3 of note 7) 12 Refractory comprising of : a) Zirconia/magnesia nozzles b) Aluminium Graphite nozzles/monoblock stoppers/stopper heads/stopper rods/shrouds (i)10 Kgs for non alloy steel (ii)25 Kgs for stainless steel c) Porous plugs/ seat blocks/ (iii)15 Kgs for alloy

109 C109 sleeves/ slidegate plates d) Direct bonded basic bricks e) EBT tubes/mass/bricks f) Monolithic/gunning/ramming mass/castables g) Dolomite/magnesia carbonbricks 13 Other Ferro alloys including nickel oxide, sinter, ferro nickel, charge chrome provided the alloying element(s) is/ are actually present in the export product. 14 Casting Powder 2 Kgs steel other than stainless steel 15 Saw/Shear blade 0.01 Kgs 16 Copper scrap/copper 0.04 Kgs Cathode/Copper Wire Bar/Copper Rod (if copper is actually present in the steel) 17 Furnace oil (for captive power plant) 70 Kgs 18 Furnace oil for oil fired reheating 50 Kgs furnace in the rolling mill 19 Furnace oil for ladle heating 6 Kgs 20 Lubricant/Gear oil (for captive 0.65 Kgs power plant) 21 Low silica Lime Stone 100 Kgs 22 Cored wire/scrap/ingot of 1 Kg aluminium 23 Cored wire of lead/lead shots (in 2.5 Kgs case of export of lead bearing steel only) 24 Raw Petroleum Coke 5.0 Kgs 25 Ceramic coated lancing pipe 1 Nos 26 Temperature Tips 0.5 Nos 27 Sampler Tips 0.25 Nos (Qty. in kgs. as in formula 4 of Note 7 below) 1. The item Non Alloy Steel Melting Scrap will be allowed as per the definition given in Section XV of Customs Tariff.2. The above norms are applicable only if (s) is manufactured through Gas/Coal based sponge iron-electric Arc Furnace/ Induction Furnace route using iron ore as the basic raw material 3.The item at Sl. No.(6) would not be allowed If (s) are manufactured through gas based sponge iron route and the items at Sr. No.(3) (4) & (5) would not be allowed if (s) are manufactured through coal based sponge iron route 4. In case of (s) manufactured through induction furnace route, the item at Sr.No.(7)will not be allowed.5. In case of continuous cast billtes/blooms/slabs produced through continuous casting route, rolling mill rolls and Tungsten carbiderolls, item at Sl.No.(9) will not be allowed. Similarly, against export of rolled blooms, billets, slabs, refractories item at Sl.No. 12(a)(b)(c) shall not be allowed, however, in case of export of rolled produced out of continuous blooms item mentioned above i.e. rolls/tunsten rings and refractories shall be allowed. Import of item at Sr.No. (9)(10)(12)(a)(b)(14)(15)&(18) shall not be permitted against export of ingots.7)formula:1) 5.5 x (mean average of % silicon content in Steel)(mean average of Manganese content in Steel) C512 Non Alloy/Alloy/ 1000 kgs 1 i)copper Cathode/Copper Wire 0.04 kg Bar/Copper Rods (if copper is

110 Stainless Steel Bars & Rods (including Rounds, Flats, Hex- agons, Octagons, Wire rods, Cold twisted deformed bars, thermo mechnically treated reinforcing Bars) Angles, Shapes and Sections (including beams, Joists, Channels, special profiles), Plates Sheets/Strips/wide Coils, Blooms, Billets, Slabs, Ingots, wires, pipes and tubes, Skelp, Rails and Sleeper present in ) ii)copper Plates/Micro alloyed copper plate (for use in copper lined casting moulds) iii)furnace Oil/LSHS/Naptha 2 MAJ INPUTS: 0.1 kg 13 kgs i)non-alloy Steel Melting Scrap 330 kgs ii)pig Iron iii)low silica lime Stone iv)coking Coal Low Ash Metallurgical Coke (LAM Coke) Metallurgical Coke 3 i)additives: kgs 620 kgs 1000 kgs, 700Kgs. 700 kgs a) Cored wires/scraps/ shots/ingots kgs of aluminium b) Ferro Niobium kg c) Ferro Vanadium kg d) Ferro Silicon/ Ferro Manganese/ kgs Silico Manganese/ Other ferro Alloy(s) (including Nickel Oxide Sinter/Ferro Nickel/Charge chrome provided the alloying elements is/are actually present in. e) Calcium Silicide (CaSi) 1.5 kg f)raw Petroleum Coke 3 ii) MISC.ITEMS: a)silicon Carbide Grains b)rolls/tungsten Carbide rings for Rolling Mill c)celox Inserts/Oxygen measuring probes d)thermodynamic elements e)magnesia Reagent/ Desulphurisation Compound f)silica Gel/Mobile Sorbead g)freon Gas-142/114(Net of Cylinders) h)stainless steel Hoses 2.3 kgs 2.0 kgs 1.77 kgs kg kg kg kg kg kg i) shear Blades/Saw Blades kg j) Oxygen Lance pipes kg k)rolling Mill Oil l)casting Powder m)temperature Tips n)canned Elements/Pearmeable elements for combined blowing o)graphite electrodes (only those having VADR facilities) kg kg kg kg kg C110

111 C111 p)welding flux q)weld wire r)surface protection film 8.0 kgs 4.0 kgs 13.3 kgs s)copper lined mould for casting kg t) Refractory Bricks/ Shapes 9 kgs and/or Dead Burnt/ Sea Water/ Fused Magnesia for Captive use for manufacture of Bricks/ Shapes u) Monolithic Refractory Viz. 5 kgs Castable, Gunning Mass & Ramming Mass and/ or Dead Burnt/ Sea Water/ Fused Magnesia for captive use for manufacture of Monolithic Refractory v) Special Refractories namely, 1 kg Continuous Cast refractories (such as Shrouds, Mono Block Stoppers and Sub-entry Nozzles), Slide Gate refractories, Porous Plug Zircon/ Zirconia Nozzles and Tundish Nozzles Note 1.The above norm is applicable only if (s) is manufactured through Blast Furnace- LD Converter/ Open Hearth/ Energy Optimising Furnace routes in the integrated steel plants. 2. Ferro Niobium and Ferro vanadium would be permitted only if the alloying element namely Niobium and Vanadium is present in. 3. Item of import at Sl.No.1 (ii), 3(ii)(b)(i)(l) (p) (q)(s) and continuous cast refractories and Tundish Nozzles at (v) shall not allowed in case of export of Steel ingots. 4. Item of import at Sl.No.1 (ii), 3(ii), (c), (m) & 3 (iii) (a), (b), shall not be allowed in case of rolled blooms/ billets/ slabs. However, against export of rolled billets made through continuous cast blooms, continuous cast refractories & Tundish Nozzles under 3(ii)(v) shall be allowed. 5. Item of import at Sl.No.3 (ii) (p) and (q) shall be allowed in case of export of pipes and tubes only. The item of import at Sl. No 3 (ii) (r) shall be allowed in case of export of CRGO/CRNGO sheets. 6.The item NonAlloy Steel Melting Scrap will be allowed as per the definition given in section XV of Customs Tariff. 7.The item at Sl. No. 3 (ii)(s) shall not be allowed in case of import of item at Sl.No.1 (ii). Similarly, in case of import of item at Sl.No. 1 (ii), the item at Sl.No.3 (ii) (s) will not be allowed. C513 C514 Non-alloy Steel bars & rods (including Rounds, Flats, Hexagons, Octagons, Wire Rods, Cold Twisted Bars, thermo mechanically treated reinforcing bars), Angles, Shapes & Sections (including beams, joist, channels, special profiles etc.) and Rails Non-Alloy Steel Bars & Rods (including Rounds, Flats, Hexagons, Octagons, Wire Rods, Cold Twisted deformed bars, 1000 kgs. 1 Non Alloy steel Ingots 1070 kg Non Alloy Steel Blooms/ Billets 1050 kg Non-alloy Steel Re-rollable 1070 kg Scrap as per IS: Rolls for rolling mills 1.77 kg 3 Furnace oil for oil fired reheating 50 kg furnace in rolling mill 4 Saw/ Shear blade 0.01 kg 1000 kgs 1 a)copper Scrap/Copper Cathode/Copper Wire Bar/Copper Rod (If copper is present in ) b)cored Wires of Lead/ Lead Shots (in case of export of lead bearing free cutting steel only) 0.04 kg 2.5 kg

112 Thermomechanically treated reinforcing Bars etc.,) Angles, Shapes & Sections (including Beam, Joists, Channels, Special Profiles etc.) Plates/Sheets/ Strips/ Wide Coils, Blooms/Billets/ Slabs/Ingots. C112 c)1)i)furnace Oil (only for Units with captive power plant) ii)lubricant (only for units with captive power Plant) 2)i)Furnace Oil for oilfired Reheating Furnace in Rolling Mill ii)furnace Oil for Ladle heating 2 MAJ INPUTS: 70 kg 0.65 kg 50 kg 6 kgs a)non-alloy Steel Melting scrap 1200 kgs b)low Silica lime stone 3 i)additives: 95 kgs a)cored wires/lumps/powder of 1 kg Calcium Silicide (CaSi) b)silico Manganese 15 kgs i) Ferro Silicon and 5 kgs ii) Ferro Manganese c)raw Petroleum Coke d)cored Wires/Scrap/Ingots/ Shots of Aluminium 3 ii)misc. ITEMS: a)graphite Electrode b)rolls/ Tungsten Carbide Rings for Rolling Mill c)copper lined moulds for castings d)shear Blades/ Saw Blades e)ceramic Coated lancing pipe f)temperature Tips g)sampler Tips h)casting Powder 3 iii)refracties: a)zirconia/ Magnesia Nozzles b)aluminium-graphite Nozzles/ Monoblock Stoppers/Stopper head/stopper Rods/Shrouds c)porous Plugs/Seat Blocks/ Sleeves/Slide Gate Plates d)direct Bonded Basic Bricks e) EBT Tube/Mass/Bricks 10 kgs 5 kgs 1 kg 6 kgs 1.77 kgs kg 0.1 kg 0.75 kg kg 0.25 No. f)monolithic/gunning/ramming Mass/castables g)dolomite Magnesia Carbon Bricks h)ladle Inner Nozzles/ Collector Nozzles Note:1.The above norms is applicable only if (s) is/ are manufactured through Electric Arc Furnace route/ Induction Furnace route using steel scrap as basic raw material. 2. In case of export of continous cast billets blooms/slabs produced through continuous casting route, 2 kgs 10 kgs

113 rolling mill rolls and tungsten carbide ring i.e. Item at Sl.No.3 (ii) (b) will not be allowed. Similarly, against export of Rolled Blooms, Billets, Slabs, refractory items 3(iii)(a&b) shal not be allowed. However, in case of export of rolled products including billets produced out of continuous cast blooms/ billets both item mentioned above i.e. rolls/ tungsten carbide rings and refractories shall be allowed. 3. Items of import at Sl.No.1 (c) (2), 3 (ii) (b),(c), (d), (h) and 3 (iii) (a&b) shall not be permitted against export of Ingots. 4. The item Non Alloy Steel Melting Scrap will be allowed as per the definition given in Section XV of Customs Tariff. C515 Non-alloy steel wire (uncoated) 1000 Kgs 1 Major Input comprising of: a) Non Alloy Steel melting 360Kgs. scrap/direct Reduced Iron (HBI/Sponge Iron) b) Low Silica lime stone 218 Kg c) Metallurgical coke (with ash content below 15%) 2 Additives comprising of: C113 i) Cored wires/ lumps/ powder of calcium silicide (CaSi) ii) Silico Manganese a) Ferro Silicon b) Ferro manganese iii) Raw Petroleum coke iv) Cored Wires/ Scrap/ Ingots/ Shots of aluminium v) Copper Scrap/ Copper Cathode/ Copper Wire Bar/Copper Rod(if copper is actually present in the export product) vi) Cored wire of lead/ lead shots (in case of export of lead bearing free cutting steel only) 3 a) Refractories and Misc. Items: i) Graphite Electrode ii) Rolls/ Tungsten Carbide rings for rolling mill iii) Copper lined mould for casting iv) Saw/ shear blade v) Ceramic coated lancing pipe vi) Temperature tips/ Celox inserts vii) Sampler tips viii) Submerged tuyers/oxygen lance pipe/oxygen Supersonic lance/tip. ix) Atmospheric injector x) Stainless Steel hoses xi) Refractory items comprising of: a) Runner Mass for Mini Blast Furnace/ Castable for Mini Blast 610Kg Kgs 0.04 kgs 2.5 kgs

114 C114 Furnace (MBF) b) Graphite Carbon refractories for Mini Blast Furnace (MBF) c) Magnesia reagent Desulphurisation compound d) Zirconia/ Magnesia nozzles e) Aluminium graphite nozzles/ Monoblock stoppers/stopper heads/ stopper rods/ shrouds f) Porous plugs/ Seat Blocks/ Sleeves/ Slide gate plates g) Direct bonded basic bricks h) EBT tubes/ Mass/ Bricks i) Monolithic/gunning/ramming Mass/Castables j) Dolomite/ Magnesia Carbon bricks xii) Casting Powder 3 b) Wire drawing misc. items Comprising of: i) Dry drawing lubricant ii) Wire drawing soap iii) Wet drawing lubricant iv) Tungsten carbide dies v) Plastic bobbins/ spools 4 Energy sources comprising of: a) i) Furnace oil ( for units with captive power plant) ii) Lubricant ( for units with captive power plant) 4 b) i) Furnace oil for oil fried reheating frunace in Rolling Mill ii) Furnace oil for ladle heating 27 Kg 34 Kg 30 Kg 0.65 kg. Note 1.The above norms is applicable only if (s) is/are manufactured through Mini Blast Furnace-Electric Arc Furnace route using liquid hot metal as the principal raw material in Electric Arc Furnace. 2. Import of item at Sl. No. 3(b) (iii) (iv) (v) shall be allowed against export of wire of size below 1mm dia only.import of Direct Reduced iron shall be limited to 10% of total metallic input 360Kgs. C516 Non-Alloy steel wire 1000 kg 1 Major Inputs comprising of: uncoated (from melting a) Non Alloy Steel Melting Scrap 1200 Kgs scrap) b) Low Silica Lime Stone 95 kgs 2 Additives comprising of : 50 Kg 6 kg a) Cored Wires/ Lumps/ Powder of Calcium Silicide (CaSi) b) Silico Manganese Or (i) Ferro silicon (ii) Ferro manganese c) Raw Petroleum Coke kgs d) Cored Wires/ Scrap/ Copper Cathode/Copper Wire

115 Bar/Copper Rod(if copper is actually present in the export product) e) Copper Scrap/ Copper 0.04 kgs Cathode/Copper wire Bar/Copper Rod(if copper is actually present in ) f) Cored Wires of lead/ lead Shots. (in case of export of lead bearing free cutting steel only) 2.5 kgs 3 Refractories & Misc. Items a) Graphite Electrode b) Rolls/ Tungsten Carbide Rings for Rolling mill c) Copper lined Moulds for casting 20 kg d) Saw/ Shear Blade e) Ceramic coated lancing pipe f) Temperature Tips g) Sampler Tips h) Refractory items comprising of: C115 1) Zirconia/ Magnesia Nozzles 2) Aluminium Graphite Nozzles/ Monoblock Stoppers/ Stopper head/stopper Rods/ Shrouds 3) Porous Plugs/ Seat Blocks/ Sleeves/ Slide Gate Plates 4) Direct Bonded basic Bricks 5) EBT Tube/ Mass/ Bricks 6) Monolithic/ Gunning/ Ramming Mass/ Castables 7) Dolomite Magnesia Carbon Bricks 8) Ladle inner Nozzles/ collector Nozzles 3 i) Casting Powder 4 Wire drawing Misc. Items comprising of: a) Dry drawing lubricants 34 kgs b) Wire drawing Soap c) Wet drawing lubricant d) Tungsten carbide dies e) Plastic bobbins/ spools 5 Energy sources comprising of: a) (i) Furnace Oil (for Units with 70 kgs captive power Plant) (ii) Lubricant (for units with 0.65 kg captive power Plant) 5 b) (i) Furnace oil for oil fired Reheating Furnace in Rolling Mill. 50 kgs (ii) Furnace oil for Ladle heating 6 kg

116 Note 1. The above norms is applicable only if (s) is/are manfactured through Electric arc furnace/ Induction furnance route using steel melting scrap as basic raw material. 2. In case the product is manufactured through induction furnace route, the item at Sl.No 3(a) shall not be allowed. 3. Import of items at Sl.Nos 4(c)(d) and (e) shall be allowed against export of wire of size bellow 1mm dia only. 4. The item Non Alloy Steel Melting Scrap will be allowed as per the definition given in Section XV of Customs Tariff. C517 Non-Alloy/ Alloy steel, Ingots, Blooms, Billets, Slabs, Bars and rods (including Rounds, Flats, Hexagons, Octagons, Wire rods, Cold Twisted Deformed Bars, Thermo Mechanically Treated Reinforcing Bars), Angles, Shapes and Sections (including Beams, Joists, Channels, Special profiles) 1000 Kg 1 Major Input comprising of: C116 i) Non Alloy Steel melting scrap/ Pig Iron ii) Direct Reduced Iron (HBI/ Sponge Iron) iii) Low Ash Metallurgical Coke (Ash content: 15% max.) iv) Low Silica Lime Stone 2 Additive comprising of: i) Calcium Silicide Lumps Powder in Cored wires ii) Silico Manganese/ Ferro Silicon/ Ferro Manganese iii) Raw/ Calcined Petroleum Coke/ Graphite Powder iv) Aluminium Scrap/ Ingots/ Shorts/ Wires v) Other ferro alloy(s) (including Ferro/ Charge Nickel/ Nickel Oxide Sinter/ Charge/ Ferro Chrome/ Ferro Vanadium/ Ferro Molybdenum/ Ferro Titanium/ Ferro Niobium) provided the alloying element(s) is/are actually present in vi) Sulphur Stick/ Sulphur Powder in Cored Wire (in caseof export of Sulphur bearing free cutting steel only) vii) Lead Wire/ Shots/ Powder in Cored wire (in case of export of lead bearing free cutting steel only) 3 Misc. Inputs comprising of: 175 kg 285 kg 500 Kg 100 kg. 0.6 kg 15 kg 4 kg 1 kg 5 kg 2.5 kg 4 kg a) Graphite Electrodes 4 kg b) CI/ Steel Rolls/ TC Rolls/ Rings 0.6 kg for rolling mill c) Copper lined Mould/ Copper 0.01 kg Mould for Continuous Casting d) Shear blade 0.01 kg e) Temperature tips/ Celox inserts 0.05 Nos. f) Sampler tips 0.05 Nos. g) Submerged tuyers/ Atmospheric injector/ Oxygen lance pipe/ Oxygen Supersonic lance tip h) Shaped Refractories (Fired/ Unfired) 0.77 kg 5 kg for non alloy steel 9 kg for alloy steel.

117 I) Monolithic Refractories (incl. Castables/ Ramming Mass/ Gunning Mixes) j) Specialty Refractories namely, 1 kg CC refrctory (Shrouds, Mono Block Stopper, SE Nozzles), Slide Gate Refractory, Porous Plug, Zircon/ Zirconia Nozzles & Tundish Nozzles) k) Casting Powder 1 kg 4 Energy sources comprising of: 4 kg for non alloy steel 5 kg for alloy steel. a) i) Furnace oil for Power 30 kg Generation (for units with captive power plant only) ii) Lubricant for Power Plant (for 0.6 kg units with captive power plant) b) i) Furnace oil for Rolling Mill 30 kg (for units with captive oil fired reheating furnace) ii) Furnace oil for Ladle/ Tundish 4 kg heating Note 1.The above norms is applicable only if (s) is/are manufactured through Mini Blast Furnace-Electric Arc Furnace route (with/without captive DRI plant) using Hot metal as the principal raw material in Electric Arc Furnace.Units with captive DRI plant may import inputs for DRI as per the relevant SIONs. 2. In case of export of continuous cast billets/ blooms/ slabs, items at Sl.No.3(b) and 4(b)(i) shall not be allowed. Similarly against export of rolled bloom, billets,slabs through ingot route, refractory items 3(J) shall not be allowed. However, in case of export of rolled billets/ blooms/ slabs produced out of continous cast bloom/ billets/ slabs, both items mentioned at Sl.No.3(b) and 4(b)(i) shall be allowed.further, against export of billets/ blooms/ slabs, quantities of all other inputs shall be reduced by 5%. 3. In case of export of Ingots, import of items at Sl.No.3(b), (c), (d), (j) & 4(b) shall not be permitted. Further quantity of other inputs shall be reduced by 10%. 4. Quantity of Silico-Manganese shall not exceed 60% of total permitted quantity of 15 kg. C518 C519 Refractories Viz. Magnesite bricks Silica Bricks/ Shapes for Blast Furnace 1 MT 1 Dead Burnt magnesite 1.1 MT (Magnesium Oxide 55% and above) 1000 kgs. 1 Quartzite 1570 kgs 2 (i) Phenolic Based Resin (Liquid) 70 kgs C520 (ii)phenolic based Resin (Powder) (iii) Ligno Sulphate (iv)goulac 3 (i) Micro Silica and/ or fused Silica (ii) Silicon Metal 3 (i) Iron Ore Powder (ii) Hydrated Lime (iii) Silicon Metal 30 kgs 24 kgs 9 kgs 21 kg 15 kgs 12 kgs 79 kgs 21 kg 4 Alloy Steel Mould 0.03 No. 5 Wooden Mould No. Silica Bricks/ Shapes for 1000 kgs. 1 Quartzite 1570 kgs Coke Oven 2 (i) Phenolic Based Resin (Liquid) 70 kgs (ii) Phenolic based Resin 30 kgs (Powder) C117

118 C521 C522 Silica Mortar Silico Manganese (Si Mn) Ligno Sulphate 2. Goulac 3 (i) Micro Silica and/ or Fused Silica (ii) Silicon Metal 3 (i) Iron Ore Powder (ii) Hydrated Lime (iii) Silicon Metal C kgs 9 kgs 21 kgs 15 kgs 14 kgs 88 kgs 21 kgs 4 Alloy Steel Mould 0.04 Nos. 5 Wooden Mould 0.07 Nos kgs. 1 Carboxyl Methyl Cellulose 10 kgs 2 Sodium Hexameta Phosphate 5 kgs 1000 kg. 1 High grade Manganese Ore (with 750 kg + 40%Mn) 2 LAM coke/ Raw petroleum coke/ 800 kg Australian Char/ Anthracite Coal (with fixed Carbon 88% minimum and Ash content 6% maximum)/ Non Coking Coal 3 Carbon Electrode/paste 30 kg 4 Furnace oil */ LSHS/ HFO * 1300 kg 5 Lubricating/ gear Oil * 8 kg * For units having captive power plants (D.G. Set). C523 Stainless Steel Wires 1000 kgs 1 Non alloy steel melting scrap 660 kgs (from melting scrap) 2 Graphite Electrode 6 kgs 3 Cored wire/ lumps/ powder of Calcium Silicide (CaSi) 1 kg 4 Rolls/ Tungston carbide rings for 1.77 kgs rolling mills 5 Copper Mould Nos 6 Silico Manganese Qty in Kgs as in Formula (i) of Note 4 6 a) Ferro Silicon Qty in Kgs as in Formula (ii) of Note 4 b) Ferro Manganese Qty in Kgs as in Formula (iii) of Note 4 7 Refractory comprising of : 25 kg a) Zirconia/ magnesia nozzles b) Aluminium-graphite nozzles/ monoblock stoppers/ stopper head/ shrouds c) Porous plugs/ Seat blocks/ sleeves/ slidegate plates d) Direct bonded basic bricks e) EBT Tubes/ mass/ bricks f) Monolithic/ gunning/ ramming mass/ castables g) Dolomite/ magnesia carbon bricks

119 8 Other ferro alloy(s) (Including charge/ ferro nickel & charge chrome ) provided the alloying elements is actually present in the 9 Casting powder 2 kgs 10 Saw/ shear blade 0.01 kg 11 Copper scrap/ Copper 0.04 kg Cathode/Copper Wire Bar/Copper Rod (if copper is actually present in the export product) 12 Furnace oil (For captive power plant) 70 kgs 13 Furnace oil for oil fired reheating 50 kgs furnace in the rolling mill 14 Furnace oil for ladle heating 6 kgs 15 Lubricant (for captive power 0.65 kgs plant) 16 Low silica lime stone 100 kgs 17 Cored wire/ scrap/ ingots of 1 kg aluminium 18 Cored wire of lead/ lead shots in 2.5 kgs case of export of lead bearing free cutting steel only 19 Raw Petroleum coke 5 kgs 20 Ceramic coated lancing Pipe 1 No 21 Temperature tips 0.5 No. 22 Sampler tips 0.25 No. 23 a) Dry drawing lubricant/ coating 9 kg b) Wire drawing soap 8 kg c) Tungsten carbide dies 1 No d) Wet drawing lubricant/ coating 4 kgs e) Diamond/ Compax dies 4 Nos f) Plastic Bobbins/ spools 300 Nos Qty in Kgs, in respect of each ferro alloy as in formula iv of note 4 Note:1. The above norm is applicable only if (s) is manufactured through electric arc furnace route/ induction furnace route using steel scrap as basic raw material. 2. Value of Misc. items at sl.no. 2,4,5,7(a) to 7(g),19,20,21,22,23(a) to 23(e) shall not excced 25% of the total CIF value of the licence. 3. In case the product(s) is manufactured through induction furnace route, the item at Sl. No. 2 will not be allowed. 4. (i) 5.50 X(mean average of % Manganese content+mean average of % Silicon content in Steel) (ii) 1100 X (mean average of % Silicon content In Steel)/(mean average of % Silicon content in ferro silicon) (iii) 1100 X (mean average of % Manganese content in steel)/(mean average of % Manganese content in ferro manganese) (iv) 1100 X (Mean average of % alloy content in steel) /(mean average of % alloy content in respective Ferro alloy) 5. Items at Sl.No 23(d) to 23(f) would be allowed against export of wire below 1mm dia only. C524 Stainless Steel Bars & Rods (including Rounds, 1 Tonne 1 Blooms/ Billets of relevant grade of stainless steel 1030 kg C119

120 Flats, Wire Rods etc. but excluding Bright Bars), Angles, Shapes and Sections (including special profiles) 1 Ingots of relevant grade of Stainless Steel 2 CI/ Steel rolls for Hot rolling Mill 3 Relevant Shear Blades/ Saw Blades 4 Relevant fuel (for fuel fired reheating furnace only) 5 Relevant fuel for electric power for hot rolling mill & auxiliaries (for units with captive power plant / source only) 1050 kg 0.60 kg (if input is slab) 1.20 kg (if input is ingot) 0.01 kg K. Cal K. Cal. Note 1. The quantity of fuel for power generation (i.e K. Cal.) which is based on a power consumption norm of approx. 100 KWH per tonne of has been allowed assuming that captive power plant/ source of at-least matching capacity exist. In case, the capacity of the Captive Power Plant/ source in a given unit is lower, quantity of fuel to be allowed for import will be reduced on pro rata basis. Note 2. The quantity of fuels (in K. Cal.) allowed in the SION correspond to a fuel having unit heat value of 8700 K. Cal. Import of any other fuel of higher/ lower unit heat value (as long as it is relevant to the facilities installed in the unit) may be permitted; quantity of which (in Kgs./Cubic mtr./k. Ltr.) may be worked out by dividing the K. Cal. Figures given in the SION by the actual unit heat value of the imported fuel. C525 Stainless Steel (Excluding Exhaust Valve Steel) Semi-finished Products (Blooms, Billets & Slabs) and Ingots 1 Tonne 1 Major Inputs : In Kg a) Non-alloy Steel Melting Scrap, Pig Iron, Sponge Iron including Hot Briquetted Iron (HBI) As per Note 2. 2 Additives (Ferro Alloys/ Metals/ Compounds) : a) i) Ferro Silicon (Si : 75%) 1.43 a) ii) High Carbon Ferro Manganese 1.43 (Mn : 75%) a) ii) Manganese Metal 1.04 b) Charge Chrome, High Carbon 1.79 Ferro Chrome (Cr : 60%) b) Low Carbon Ferro Chrome (Cr : %) c) Unwrought Nickel (Ni : 99%) 1.04 c) Ferro Nickel, Nickel Oxide 2.58 Sinter (Ni : 40%) d) Lead (Pb : 99%) Scrap/ Shots/ 1.60 Wires/ Powder in cored wire e) Ferro Molybdenum (Mo : 65%) 1.58 e) Molybdenum Oxide (Mo : 60%) 1.89 f) Ferro Titanium (Ti : 70%) 2.43 g) Ferro Tungsten (W : 75%) 1.38 h) Any other Nobel/ Special Ferroalloys (Ferro Vanadium, Ferro Boron, Ferro Phosphorous, etc.) (In Kg. per Kg. content of alloying element in the export product) 1.38 C120

121 I) Any other Metal (not present in aforesaid ferro-alloys) in unwrought or wrought form or in powder form or powders in cored wires 1.04 j) Sulphur stick / Sulphur powder in 2.00 cored wire 3 Consumables / Missc. Inputs : In kgs a) Ferro-Silicon (Si : 75%) (for deoxidation/ 20 Reduction) b) Graphite Electrodes (For units 4 with EAF Furnace only) c) Relevant CI, Steel Rolls for Hot 0.6 Rolling Mill/ Continuous Casting Machine (against export of rolled products only) d) Relevant Copper lined Moulds, 0.01 Copper Moulds/ Tubes for Continuous Casting (if export product is produced through Continuous Casting route with/ without further rolling) e) Casting Powder 1 f) Aluminium wires, Notched 2 bars,scraps, shots, ingots, Dross, Powder in Cored Wire and Ferro Aluminium g) CaSi Lumps, CaFe Lumps, 0.1 Powder of CaFeAl, cafe, CaSi in Cored wire h) Rolling Mill Oil, Hydraulic Oil, 0.5 Lubricating Oil (against export of rolled products only) I) Celox Inserts, Temperature Tips, 0.1 Oxygen Probes, Sampler Probes, Sampler Tips j) Relevant Shear Blades, Saw 0.01 Blades k) Oxygen Lance pipes, Submerged 0.1 tuyers, Atmospheric injector l) Calcium Carbide 0.5 m) Low silica Calcined lime/ lime stone n) Refractories : 100 i) Relevant Shaped Refractories 20 (Fired/Un-fired Bricks/Shapes) ii) Relevant Monolithic 4 Refractories (including Castables, ramming mass, gunning Mixes) iii) Relevant Special Refractories 1 i.e. C.C. refractory (Shrouds, Mono Block Stopper, SE Nozzles), Slide Gate refractory, Porous Plug, Zircon/ Zirconia Nozzles & Tundish Nozzles o) Calcined / Raw Petroleum coke 10 C121

122 4 Enerhgy Soureces : a) Relevant fuel for electric Power K. Cal for Steel making and Auxiliaries (for units with captive power plant/ source only b) Relevant Lubricant for captive 1 kg power plant c) Relevant fuel for fuel fired reheating K. Cal furnace (if & only if is supplied in rolled condition) d) Relevant fuel for electric power K. Cal for hot rolling mill & auxiliaries (if & only if is supplied in rolled condition) e) Relevant fuel for ladle / tundish / K. Cal ferro-alloy heating f) Relevant fuel for Boilers for VOD (to units having VOD facilities only) K. Cal Note: 1. This norm is applicable for manufactured adopting Electric Furnace/ Electric Induction Furnace using Non-alloy Steel Melting Scrap as the basic input. Note: 2. The total quantity of imported inputs allowed against Sl.No. 1 (a) and Sl No. 2 shall be limited to 1115 kg. Further, individual quantity of Pig Iron and Sponge Iron/ HBI allowed against Sl. No. 1(a), if any, shall not exceed 20% and 65% respectively of the total quantity of items to be permitted therein. Note: 3. Quantities of Ferro Alloys/Metals/Compounds have been worked out based on a specified percentage of alloying element in the Ferro Alloys/Metals/Compounds as indicated therein within the parenthesis against each alloy. If the percentage of alloying element in the ferro-alloy is higher/lower, the revised (i.e lower / higher) quantity may be worked out on pro-rata basis as under: Quantity permitted in norm x % of element in ferroalloy/metal/compound as per the norm Actual % of element in the imported ferroalloy/metal/compound Note: 4. For a given alloying element in steel, wherever two alternate ferroalloy / metals / compound of the same alloying element have been permitted and it is proposed to import a combination of both, individual quantities of each ferro-alloy may be worked out based on the specified (part) quantities of the alloying element in two forms (but within the overall quantity of alloying element in the steel), using the content based formula given therein. Note: 5. Alloying elements (s) in steel is/are prescribed by specifying the minimum value or a range or the maximum value. For calculating the quantities of ferro alloys/ metals/ compounds as per the content based formula given in the SION, the prescribed minimum or the mid value of the range or 0.8 times the maximum value of the respective alloying element (s) in shall be taken into consideration. Note: 6. Import of Stainless Steel Melting Scrap of Known chemical composition may be permitted within the overall quantity of item No. 1 (a) but upto 90% to Induction Furnace units having AOD/VOD facilities and Electric Furnace units. For units having Induction Furnaces without AOD/VOD, import of stainless steel melting scrap will however, be permitted within the overall quantity of item No. 1(a) but upto 60% only. Only such grade of Stainless Steel Melting Scrap will be allowed that is relevant to the export product. In such a case, quantity of respective ferroalloy/metal to be allowed as per formula at Sl. No. 2 will have to be reduced to account for the recoverable alloying element (s) (Nickel, Copper, Chromium and Vanadium) present in the stainless steel scrap. The reduced quantity of these ferroalloys/metals shall be obtained by deducting the equivalent quantity of ferroalloy/metal to be obtained using the following formula from the total quantity to be worked out as per formula at Sl. No. 2 in the SION read with Note 3: C122

123 Alloy Steel Scrap Quantity (kg) x % of relevant element in scrap x % of relevant element in ferroalloy / metal / compound Note 7: The specified quantities of energy sources/ fuel for electric power generation(in K.Cal) against import item 4(a) & 4(c) which correspond to electric power consumption of 500 and 100 KWH per tonne of have been allowed assuming that Captive Power Plant (CPP)/Source of matching capacity exist. In case CPP/source in a given unit is of lower capacity, quantity of fuel to be allowed for import will be reduced on pro rata basis. Note 8: Quantity of energy sources/ fuels (in K.Cal) correspond to a fuel having unit heat value of 8700 K.Cal. Import of any other fuel of higher/lower unit heat value (as long as it is relevant to the facilities installed in the unit) may be permitted, quantity of which (in Kgs./ Cubic Meters/ K. Liters) may be worked out by dividing the K.Cal figures given in the SION by the actual unit heat value of the imported fuel. Note 9 : Import of items at Sl.No. 3(b), (c), (d), (i), CC Refractories under 3(n) (iii) and 4(c) shall not be permitted against export of steel ingots. Note 10 : The Item Low Carbon Ferro Chrome under 2(b) above is to be allowed only to manufacturers not having Argon Oxygen Decarburization (AOD) and Vacuum Oxygen decarburization (VOD). However, this input may be 80 kg (max) to units with only VOD facilities Kgs (max) to units with only AOD facilities. C526 Cold Rolled Stainless Steel Plates/Sheets/hoops & Strips/ Wide Coils/Circles kgs 1 HRSS Wide Coils / Strips of 1075 kg relevant grade 2 PVC Film (with glue) As per packing Policy 3 Relevant Steel Shots (only 5 kg against in short blasted condition) 4 Kraft Inter-leaving Paper As per packing Policy 5 Ditamacous Earth 0.4 kg 6 Relevant CI / Steel Rolls for Cold Rolling Mill 7 Furnace Oil or other Relevant Fuel for electric power for CRM & Auxiliaries (for units with Captive Power plant/source only) 8 LPG or other Relevant fuel for annealing furnace (against export of annealed products only) C kg 140 kg Furnace Oil K. Cal other relevant fuel (s) 60 kg LPG K. Cal other relevant fuel (s) Note 1 : Import of energy sources / fuel(s) as at Sl. No. 7 & 8 of the import list may be permitted provided the fuel is relevant to the installed facilities in a given unit. Quantity of such fuel (in Kgs./ cubic meters/ K.liters) other than Furnace oil & LPGs may be worked out by dividing the specified K. Cal figures given in the SION by the actual unit heat value of the imported fuel. Note 2 : The specified quantity of energy sources (in K.Cal) for electic power generation for cold rolling mill, which corresponds to 600 KWH/tonne of, have been allowed assuming captive power plant/source of at-least matching capacity exist. In case, the CPP/ source in a given unit is of lower capacity, quantity of fuel to be allowed for import will be reduced on pro rata basis. Note 3 : In case is Circle/circular blanks punched out from CR Stainless Steel

124 Sheets/Strips/Wide coils, the quantities of imported inputs will increase which may be obtained by multiplying the given quantities by a factor of C527 Stainless Steel Wires/Ribbon kgs 1 a) Stainless Steel Wire Rods 1060 kgs 1 b) Stainless Steel Wire of dia kgs. mm and above for redrawing of thinner wire of dia 1 mm and below. 1 c) Stainless Steel Wire of dia kgs. mm and above for redrawing of thinner wire of dia 0.25 mm and below. 2 Dry Drawing Lubricant/ coating 9 Kgs 3 Wire Drawing Soap 8 Kgs 4 Tungston Carbide Dies 1 No 5 Wet Drawing Lubricant/ coating 4 Kgs 6 Diamond or Blanks/ Compax dies 7 (a) Used/ New Plastics/ Steel Bobbins/ Spools (b) ABS/ Polystrene for making Plastics Bobbings/ Spools C124 4 Nos 300 Nos 8 Inconel Pipes/ Tubes 2 kgs kg/kg content of Plastic Bobbins/ Spools in the export product Note No.1. Import of items at Sl. No. (5) (6) & (7) shall be allowed against export of stainless steel wires of size below 1.6 mm only. C528 Steel Earthing Wire 1 kg 1 Non-Alloy Steel Wire Rod 1.00 kg (Gavanized) 2 Zinc 0.04 kg C529 Deleted. C530 1"Flexible Tubing 1 kg 1 Low carbon M.S. defective 1.05 kg sheets/ coils C531 1/2" Flexible Tubings 1 kg 1 Low carbon M.S. defective kg sheets/ coils C532 1/2" to 3" Galvanised 1 kg 1 Low Carbon M.S. Defective kg Flexible Conduits Sheets/ Coils 2 Zinc 0.04 kg C533 C534 C535 2" Bungs with or without Washer/Gasket 2" Flanges with or without Washer/Gasket 2" Galvanised flanges with rubber gaskets 1 No 1 Hot/Cold Rolled Steel Sheet/Coil/Strip 2 Gaskets Gasket Tube of relevant length 1 No 1 Hot/Cold Rolled Steel Sheet/Coil/strip 2 Gaskets Gasket Tube of relevant length kg/ kg wt. of steel in export Net to Net Net +2% wastage 2.10 Kg /kg wt of steel Net to net Net + 2% wastage 1 HR/CR Sheets/ Coils/ Strips 2.10 Kg/Kg wt. of steel (ungalvanised)in 2 Synthetic rubber namely SBR/PBR/Nitrile/EPDM Kg/Kg wt of Gasket in the export product

125 C536 C537 C538 C539 C540 2" Galvanised/ Zinc Coated Bungs 2" Galvanised/Zinc coated Flange 2"Galvanised Bungs with rubber Gasket 3/4" Bungs with or without Washer/Gasket 3/4" Flanges with or without Washer/Gasket 3 Zinc 0.04 Kg /Kg wt. of steel in the export product 4 Resistant Laquer 1.42 kg/kg content in. 1 No 1 Hot/Cold Rolled Steel Sheet/Coil/Strip 2 Plastic Gasket LDPE Granules Gasket Tube of relevant length C kg/ kg wt of steel (Ungalvanised) in export Net to net 1.05 kg/kg weight of Gasket Net+2% wastage 3 Zinc Ingot 0.04 kg/kg of steel in export 4 Resistant Laquer 1.42 kg/kg content in 1 No 1 Hot/Cold Rolled Steel Sheet/Coil/Strip 2 Gaskets Gasket Tube of relevant length 2.10 kg/kg wt of steel (Ungalvanised) in the Net to net Net+2% wastage 3 Zinc Ingot 0.04 kg/kg wt. of steel in export 4 Resistant Laquer 1.42 kg/kg content in 1 HR/CR Sheets/Coils/Strips Kg/kg wt. of steel (ungalvanised) in. 2 Relevant Synthetic rubber, namely SBR/PBR/Nitrile/EPDM Kg/kg wt. of Gasket in the export product 3 Zinc 0.04 Kg/Kg wt. of steel in export product 4 Resistant Laquer 1.42 kg/kg content in 1 No 1 Hot/Cold Rolled Steel Sheet/Coil/Strip 2 Gaskets Gasket Tube of relevant length 1 No 1 Hot/Cold Rolled Steel Sheet/Coil/Strip 2 Gaskets Gasket Tube of relevant length C541 3/4" Flexible Tubings 1 kg 1 Low carbon M.S. defective sheets/ coils C542 3/4" Galvanised bungs with rubber gaskets 1.8 kg /kg wt of steel (ungalvanised) in export Net to net Net+2%wastage kg/kg wt of steel in export Net to Net Net+2%wastage kg 1 HR/CR Sheets/Coils/Strips 1.8 Kg/kg wt. of steel (ungalvanised) in the. 2 Synthetic rubber, namely SBR/PBR/Nitrile/EPDM Kg/kg wt. of Gasket in the export product 3 Zinc 0.04 Kg/Kg wt. of steel in export product

126 C543 C544 C545 C546 C547 C548 3/4" Galvanised flanges with rubber gaskets 3/4" Galvanised Zinc coated Bungs 3/4" Galvanised/ Zinc coated Flanges Adjustable Bracket (Galvanised) Wood to steel adapter, all types. Airconditioner (All Types excluding Split Air Conditioner) 4 Resistant Laquer 1.42 kg/kg content in 1 HR/CR Sheets/Coils/Strips Kg/kg wt. of steel (ungalvanised) in. 2 Synthetic rubber, namely SBR/PBR/Nitrile/EPDM C Kg/kg wt. of Gaskets in the export product 3 Zinc 0.04 Kg/Kg wt. of steel in export product 4 Resistant Laquer 1.42 kg/kg content in 1 Kg 1 Hot/Cold Rolled steel sheet/coil/strip. 1.8 Kg/Kg of steel (ungalvanised) in export 2 Zinc 0.04 Kg/Kg content of steel in export 3 Gasket Net to net Gasket Tube of relevant length Net+2%wastage 1 No 1 Hot/Cold Rolled Steel Sheet/Coil/Strip 2 Gaskets Gasket Tube of relevant length 1.776kg/ kg wt of steel (ungalvanised)in export Net to net Net+2%wastage 3 Zinc Ingot 0.04 kg /kg of steel in export 4 Resistant Laquer 1.42 kg/kg content in 1 kg. 1 Hot Rolled MS Sheet/ Strips/ kg Coils 2 Zinc kg 1 kg. 1 Hot Rolled MS Sheet/ Strips/ kg Coils 2 Zinc kg 1 No. 1 Compressor 1 No. 2 Grill Assembly Net to net 3 Copper Tube of relevant size Net content + 1% wastage 4 Fractional HP Motor 1 No. 5 Louver Motor (Synchronous Net to net motor) 6 Capacitor of relevant specification 1 No. 7 Copper Capillary of relevant size 1 No. 8 Thermostate 1 No. 9 Propeller (Fan) 1 No. 10 Blower 1 No. 11 Switch 1 No. 12 Main Cord of relevant specification 13 Mild Steel/Galvanised Steel in Sheet/Coil form 1 No. Net content + 5% wastage.

127 C549 Anchor Bolt with Nut 14 Aluminium Sheet/Foil Net content + 2% wastage. 15 Powder Paint 0.5% of FOB 16 Eco-Friendly Refrigerant Gas Net to net 1 kg 1 Non Alloy Steel Round 1 Non Alloy Steel Wire Rods / Rounds in Coils C kg/kg content in 1.10 kg/kg content in 1 Non Alloy Steel Billets 1.15 kg/kg content in Note : 1. If is painted, in addition relevant paint may be allowed to the extent of 4% of the FOB value. C550 C551 C552 Animal Drawn Ploughs/ Parts Thereof Arm Blade (Galvanised) Aruvil Double Wheel Carrier kit Set (Galvanised) kg 1 Non-Alloy Steel Round/ Billets kg/kg content in exports 2 LDPE Bitumenised Paper, Card 1.05 kg Board 1 kg. 1 Hot Rolled MS Sheet/ Strips/ kg Coils 2 Zinc kg 1 kg. 1 Mild Steel HR Sheets/ Strips/ kg Coils 2 Mild Steel CR Sheets/ Strips/ Coils kg 3 Zinc kg C553 Automatic Thimble 1 No. 1 Kontratherm Disc 2 Nos. C554 Axes made of Steel 1 kg 1 Non-Alloy Steel Round/ Billets kg/kg content in export C555 Deleted C556 Deleted C557 Deleted C558 Ball Chain Cap 1 kg. 1 Pig Iron kg (Galvanised) 2 Zinc kg C559 C560 C561 C562 Ball Pen Steel Refills Barb Arm (Galvanised) Barb Arm Base Bearing Races (Turned Inner and Outer) 1 kg. 1 Brass scrap kg 2 Steel Balls Nos 1 kg. 1 Hot Rolled MS Sheet/ Strips/ 1.15 kg Coils 2 Zinc kg 1 G.P. Sheet/Strips/Coils 1.15 kg 1 kg. 1 Pig Iron kg 2 Zinc kg 1 Kg 1 Ball Bearing Grade Steel Tube (SAE 52100) Ball Bearing Grade Steel Bar (SAE 52100) 2 Misc. Items: Super Precision Fibre Cage Bearing, Grinding Spindle and Grinding Wheel 1.15 kgs 1.30 kgs Upto 2% of FOB value of export. C563 Bell Metal utensils 1 kg Bell metal scrap kg

128 C564 Bimetallic Type Spark Plug 2 Lakh Nos. A. RAW MATERIALS: 1 Calcite Powder kgs 2 Calcined Alumina Kgs 3 Steiron Talc Kgs 4 Green Pigment 0.62 Kg 5 Active Bentonite 0.40 Kg 6 Adhesive 2.00 Kgs 7 Dextrin 0.40 Kg 8 Fusing Glass Kgs 9 Carbonyl Iron Powder Kgs 10 Melt Mullite Kgs 11 Fine Graphite Powder Kgs 12 Inscription Script Green 0.40 Kg 13 Nickel Alloy Round/Profile Wire Kgs 14 Nickel Squares/Anodes Kgs 15 Nickel Sulphate Kgs C128 B. COMPONENTS: 1 Bi-Metal Electrode Net to Net 2 Electrode Shank Net to net. 3 Washer/Gasket Net to net. 4 Sealing Washer Net to net. 5 Terminal Cap/Nut Net to net. 6 Sealing Washer/Ring Net to net. 7 Housing Cold Heading/ Extruding/ Net to Net kgs Forging Steel Rounds/ Bars/ Coils and Rods of Dia 13 mm to 19.6 mm 8 Insulator 1 No./ unit (Net to net) 9 Resister 1 No./ unit (Net to net) 10 Spring 1 No./ unit (Net to net) C. MISC. ITEMS: Upto 2% of FOB value of export. 1 Molykote "G" Rapid Spray 2 Silver Anode 3 Silver 1M Salt 4 Special HSS Drills 5 Inscription Strips 6 Grinding Mandrels 7 Thread Chasers/Thread Rolling Jaws 8 Electrode Disc Blanks 9 Grinding Wheels

129 10 Inscription Ring 11 Pressing Pins 12 Stamp Head 13 Welding Electrodes 14 Form Sinkers 15 Carbide Tips/Inserts/Ceramic Inserts 16 Punches 17 Shear Blade 18 Sillment Powder (198 kgs) 19 Activator (9.9 kg) 20 Epoxy Resin (26 kg) Import item viz insulator mentioned at Sl. No. 8 of Components shall be allowed for import in lieu of import items at Sl. No. 1 to 12 of Raw Material. C565 C566 C567 C568 C569 Deleted Galvanised Welded steel Pipes/ Tubes 1 kg. 1 Pig Iron C129 Hot Melting Scrap Steel Skulls kg kg kg 2 Zinc kg Bolt Axle (Galvanised) 1 kg. 1 MS Round kg made of Steel. 2 Zinc kg Bolts & Nuts made of CHQ Steel Bolts (Galvanisded) 1 kg 1 CHQ Grade Non-Alloy Steel Round/Wire Rod 1 kg 1 MS Round/Rods MS Billets MS Billets Cuttings/Re-Rollable Scrap kg 1.18 kg kgs kgs. 2 Zinc kg C570 Bolts/screws made of steel 1 kg 1 Alloy/ Non-Alloy Steel Rounds/ Wire Rods/Bars/Rods kg/kg content in export If is painted/coated in addition relevant Paint/ Coating Powder may be allowed to the extent of 4% of the FOB value. C571 C572 C573 C574 Bolts/screws made of steel Electroplated Bolts/screws made of steel galvanised Bottom, Top Cover of Round Battery Jacket made of Tin plate. Boulevard Clamp (Galvanised) 1 kg 1 Alloy/ Non-Alloy Steel Rounds/ Wire Rods kg/kg content in export 2 Nickel kg/ kg of 1 kg 1 Alloy/ Non-Alloy Steel Rounds/ Wire Rods kg/kg content in export 2 Zinc 0.04 kg/ kg of export product 1 kg 1 Electrolytic Tin Plate Prime 1.25 kg 1 kg. 1 Hot Rolled MS Sheet/ Strips/ 1.01 kg Coils 2 Zinc kg

130 C575 C576 C577 C578 C579 Box Girders for Bridges (Galvanised) Box Hinge (Galvanised) Brace Band (Galvanised) Brace Rail End (Galvanised) 1 MT 1 Steel Plates 50B grade confirming to BS MT 2 Zinc kg 1 kg. 1 Mild Steel HR Sheets/ Strips/ Coils kg 2 Mild Steel Rounds kg 3 Zinc kg 1 kg. 1 Hot Rolled MS Sheet/ Strips/ Coils kg 2 Zinc kg 1 kg. 1 Cold Rolled MS Sheets/ Strips/ Coils kg 2 MS Plate kg 3 Zinc 0.040kg Brace Rail End 1 kg. 1 Pig Iron kg (Galvanised) 2 Zinc kg C580 Brass Builder Hardware 1 kg 1 Brass scrap 1.11 kg/kg content in C581 C582 Brass caps for dry cells batteries Brass Cup or Cup, Bullet, Jacket of Copper Alloy for Defence application 1 kg 1 Brass scrap kg 1 Kg. 1 Copper Cathodes/Copper 1.10 kg/kg content in Ingots/Copper Wire Bars/ Copper Rods 1 Copper Scrap 1.12 kg/kg content in 2 Zinc 1.10 kg/kg content in 3 Graphite Plate * 4 Morcem cement ** Note: * 1 set of two plates for 7 MT of will be allowed ** 1 Kg per 175 Kg of will be allowed. C583 Brass Tubes 1 MT 1 Brass Scrap 1.12 MT 2 Drawing Dies Upto 5% of FOB value of exports C584 Brass valves 1 kg 1 Brass Scrap kg C585 Bronze utensils 1 kg 1 Bronze scrap kg C586 Bull Dog Hinge 1 kg. 1 Mild Steel HR Sheets/ Strips/ kg Coils 2 Mild Steel Rounds kg C587 C588 Bushing Reverse Ball Valve made of Aluminium Alloy ( Grade AA 2011T3) ( Motor Vehicle Part) Bushing Third Ball Valve made of Aluminium Alloy (Grade AA 2011T3) (Motor Vehicle Part) 3 Zinc kg 1 MT 1 Aluminium Alloy Rod (Grade AA2011T3 dia 20mm). 2 Tools namely Collet, Guide Bush, Carbide Form Cutter(HOB), Carbide Drill/Twist Drill 1 MT 1 Aluminium Alloy Rod (Grade AA2011T3 Ddia 20mm) 2 Tools namely Collet, Guide Bush, Carbide Form Cutter(HOB), Carbide C MT/MT content in. Upto 5% of FOB value of exports MT/MT content in. Upto 5% of FOB value of exports.

131 C589 Epoxy Polyester Powder coated Cabinet made of CRCA Non-Alloy Steel Sheets Cabinets made of CRCA Non-Alloy Steel Sheets other than Epoxy Polyester Powder Coated. C131 Drill/Twist Drill 1 kg 1 Mild Steel CRCA Sheets/ cuttings/ coils/ defective/ secondary 1.05 kg/kg content in 2 6 Leverlock with dead locking Mechanism (relevant) 1 No. (net to net) 3 Round Spindle Handle (relevant) 1 No. (Net to net) 4 3 Ply Carton (As per packing policy) 5 ULF Slides 428mm 2 Net to net. Nos./drawer. 6 Cam Lock Brass No./Cabinet. Net to net 7 Epoxy Polyester Powder. 6% of FOB value. The import of Epoxy Polyester powder shall be allowed only for caninets coated with this powder. C590 Cable Ties made of 1 kg 1 Stainless Steel Strips /Coils of 1.25 Kg Stainless Steel AISI 304Grade C591 C592 C593 Cantilever Gate Roller (Galvanised) Capseal made out of Tin Plate Waste/Waste or Tin Free Steel Carbon Steel Submerged Arc Welded Pipes as per API Grade/ ASTM Grade or equivalent Hot Formed Steel Bends as per API, ASTM Grade or euivalent grade Degree: Degree 1 No. 1 Non-Alloy Steel Round/ Billets kg 2 Mild Steel HR Sheet/Strips/Coil 1.10 kg/kg content in export 3 Mild Steel Rounds 1.05 kg/kg content in export 4 Pig Iron 1.10 kg/kg content in export 5 Zinc Upto 2% of weight of export 6 Bearing Net to Net 1 No. 1 Tin Plate Waste/ Waste Tin Free Steel kg/kg content in. 1 MT 1 Non-Alloy HR Coils/Plates 1.05 MT/MT content in 2 Welding Flux 5.0 Kg 3 Welding Wire 4.13 Kg 4 Grinding Wheel 0.2 No. 5 Oil & Lubricants 1.5 Litres 6 Cutting Oil 0.5 Kg 7 CO2 Wire 0.8 Kg 8 Rust Preventing Oil 0.1 Kg 9 X-Ray Film 1 Sheet Note: 1. The total CIF Value of all items appearing at Sl.Nos 2 & 4 to 9 shall not exceed 3% of FOB Value of export. 2. An additional item X-Ray tube will be allowed for order of pipes above 25,000 MT C594 C595 Carbon/ Alloy Steel Seamless Tubes (Cold Finished) Ceramic Coated Steel Pipes With or Without 1 MT 1 Carbon/ Alloy Steel Rounds/ Bars/ Billets Carbon Steel Seamless mother pipes (hot finish) 1 kg 1 CR/HR Coil in Prime/Second condition 1.44 MT 1.20 MT 1.05 Kg/kg content in export. couplings 2 Micro Silica 1.05 Kg/Kg content in export.

132 3 Aimina Cement 1.05 Kg/Kg content in export Product C596 Cl Cistern 1 kg 1 Pig Iron kg C597 Cl Pipes and Fittings 1 MT 1 Major Input comprising of Pig 1100 kg Iron/ CI Scrap/ Steel Melting Scrap 2 Low Ash Met. Cocke (Ash: 110 kg Below 15%) 3 Ferro Alloy comprising of FeSi & FeMn: 5 kg 4 Other inputs comprising of Fireclay and Fired silica Refractory (Bricks/ Mass), Grinding Wheel and Black Bituminous Paint 5 Packing Material (MS Round bars/ Flats/ Strips for crating and stuffing) C132 CIF value of all these items taken together restricted to 1% of FOB value of exports. As per packing Policy. Note: Out of the total quantity of the input permitted against item No.1 above, the quantity of steel melting scrap shall be restricted to 5% of the said total quantity. C598 CLEVIS 1 kg 1 MS Flats/Plates kg/kg content in export. C599 Clips for Railways - Elastic Rail clips, pendrol clips, E. Clips and G- Clips. 1 MT 1 Alloy Steel Rounds/Rods Alloy Steel Billets 2 Misc. Items such as Cutting Tools, Grinding Wheels, Refractory Material, Lubricating Oil, Anti- Rust Oil, Paints, Quenching Oil, Heat Treatment chemicals 1.15 MT 1.20 MT Upto 2% of FOB value of export. C600 Coil Spring 1 kg 1 M.S. wire rod kg C601 Cold Rolled Steel Tubes 1 MT 1 Cold Rolled Non-alloy Steel 1.05 MT for Furniture Sheet/ Strip/ Wire Coils (prime seconds/ defectives) C602 Cold Rolled Precision Steel Tubes 1 MT 1 CR Steel Coils/ Sheets in Prime 1.05 MT C603 C604 Machined/ Cold Rolled/Cold Formed rings for bearing races, CV cages Collar C605 Components of Electric Teeth Plaque removing Brush: Drive Gear Please see Note below C-608 C606 Components of Electric Teeth Plaque removing Brush: Satelite Gear Please see Note below C MT 1 Alloy/Non-Alloy Steel Round/Billets/Bars MT 1 Seamless Steel Tubes 1.57 MT 1 kg. 1 Hot Rolled MS Sheet/ Strips/ kg Coils 2 Zinc kg 1 Kg 1 Stainless Steel Rod/Coil Dia 2.4 mm to 4.8 mm (AISI 416) 1 Kg 1 Stainless Steel Rod/Coil Dia 2.4 mm to 4.8 mm (AISI 416) 6.0 Kgs C607 Components of Electric 1 Kg 1 Stainless Steel Strips/Coil upto 5 Kgs 5 kg

133 Teeth Plaque removing Brush: Rack Please see Note below C-608 C608 Components of Electric Teeth Plaque removing Brush: Rack Pin/Pin (Big & small). C mm thick (AISI 416 T) 1 Kg 1 Stainless Steel Rods/Coil upto 1.5mm thick (AISI 416 T). Note: In respect of norms covered by Sl.Nos. 605 to 608 : above Relevant consumables in the form of Chemicals IA/IM/IC Solution of cutting tools (a) Collet for automat (b) Guide bush (c) Carbide form cutter (HOBB) and (d) Carbide drill and twist drill will be allowed upto 20% of the FOB Value. C609 C610 C611 Components of Electronic Home plaque removing instruments: Drive Gear Components of Steel Drum namely Body Sheets/ Circles made of CRCA Copper Bottom Stainless Steel Kitchenwares 1 Kg 1 Stainless Steel Rod 2.4 mm to 4.8 mm 2 Misc. items in the form of chemicals IA/IM/IC solution and cutting tools (a) Collet for Automat (b) Guide Bush (c) Carbide form cutter (Hobb) and (d) Carbide drill & Twist Drill 2 kg 4.9 Kgs CIF Value limited to 20% of FOB value. 1 MT 1 CRCA Steel Coils 1.05 MT/MT content of CRCA Steel in. 1 kg 1 CR Stainless Steel Sheets/Coils AISI kg/kg of net content in the export product 2 Copper Ingot/Rods 1.02 kg/kg of net content in the export product C612 Copper utensils 1 kg 1 Copper scrap kg C613 Corner Arm (Galvanised) 1 kg. 1 Mild Steel HR Sheets/ Strips/ kg Coils 2 Mild Steel Rounds kg C614 Crank Drive of Cryogenic Pumps 3 Zinc kg 1 No. 1 Needle Bearing MR 48 SS Bore Net to net MM 2 Needle Bearing MR 22 SS Bore 34.8 MM Net to net. 3 Roller Bearing NUP 308 Bore 40 Net to net. MM WT-725 Gms.+/-10% tolerance limit 4 DU Bush 48 DU 72 Net to net. 5 DU Bush PAP 4030 Net to net. 6 Vari Seal Net to net. 7 SS H.T. Bolts Net to net. 8 Spring Washer Net to net. 9 Nolos Rings Net to net. C615 CRCA Butt Hinges 1 kg 1 CRCA sheet/coil kg C616 1 MT 1 CRCA Sheet of relevant gauge 1.16 kg/kg content in. CRCA Ghamellas with/without handle made of CRCA Sheet/M.S. Wire Rod 2 M.S. Wire Rod of relevant diameter 1.00 kg/kg content in.

134 C617 C618 C619 C620 C621 C622 C623 C624 C625 C626 C627 CRCA Hinges Electric Brass plated CRCA Hinges self colour CRCA Hinges Zinc plated Crow Bar / Wrecking Bar Crowns made of Tin free steel/ Tin Plate Prime with dry blend lining Printed Cultivator Cupboard made of CRCA Sheets Cut Hand tacks made of M.S. Sheets Decorative Handicrafts/Artwares made of Anodised Aluminium Dimmer Stat continuously variable voltage auto transformer (copper wound) - Portable types Dissolved Acetylene Gas Cylinder 1 kg 1 CRCA Sheet/Coil 1.08 Kg/Kg. content in export Product 2 Low Carbon Wire Rod Kg/Kg. content in export Product 3 Nickel Kg/Kg. content of steel in export Product 4 Brass Scrap 0.02 Kg/Kg. of steel content in export product. 1 kg 1 CRCA Sheet/coil 1.08 Kg/Kg. content in 2 Low Carbon Wire Rod 1.02 Kg/Kg. content in 1 kg 1 CRCA Sheet/coil 1.08 Kg./Kg. content in. 2 Low Carbon Wire Rod 1.02 Kg./Kg. content in. 3 Zinc Upto 4% of net weight of steel in the. 1.0 kg 1 Non-Alloy Steel Round/ Billets kg Content of Import Item 1 kg 1 Tin Free Steel/Tin Plate Prime 1.22 kg/kg content in export. 1 kg MS Flat Plate content 1 kg content of import item 2 PVC Compound or PVC Free Compound 3 Printing Ink, Coating Lacquer, Varnish 1 MS Flat/plate 1.07 kg 2 MS Round 1.05 kg 3 MS Plates 1.11 kg 1 Mild Steel CRCA Sheets/ cuttings/ coils/ defective/ secondary 1.0 Kgs 1 M.S. Second/ Defective /Sheets/ Coils/ Strips C kg/kg content in export Ltr kg 1.05 Kg 1 kg 1 Aluminium Ingot 1.05 kg 2 Dyes for Anodising 1% of FOB value 1 No. 1 CRGO Steel Sheets 1.02 kg/kg content in export 1 No. 1 HRMS Sheets 4 mm Seamless Steel Tubes. 2 Asbestos Net to net 3 Calite Net to net 1.10 Kg./Kg. content in export q.p2kg/kg content in.

135 C628 Divider Valves (Metering Device) 4 Acetone 1.05 Kg/Kg content in export 5 Primer paint 6 Marron Paint 7 Valve (Brass) Net to Net 8 Valve (Guard) Net to Net 9 Neck Ring Net to Net 10 Fuisible Plug Net to Net 1 No. 1 U-Cup Seal Net to net. 2 Polyurethene-O-Ring Net to net. 3 Drawn Steel Bars/ Section Free Cutting Steel with Leaded ENIA 1.25 kg/kg content in export. C629 Domestic utensils (Brass) 1 kg 1 Brass kg C630 Door/ Window/ ventilator 1 kg 1 M.S. Billets kg/kg content in Sections. C631 Double Carrier Wheel 1 kg. 1 Mild Steel HR Sheets/ Strips/ kg Coil 2 Mild Steel CR Sheets/ Strips/ kg Coils 3 MS Rounds kg C632 Dowel Pin made out of CHQ Alloy steel/ Stainless Steel C633 Drag Link Chain 1 kg content of Import Item C634 C635 Drive Rod made of Stainless Steel (Part of Dental Instrument) Ductile Iron Spun Pipes 4 Natural Rubber kg 5 Zinc kg 1 Kg 1 Relevant CHQ Alloy Steel/ 1.7 Kgs Stainless Steel wire Rods in Coils or Bars 2 Misc. items such as: Tool & Die Steel/Grinding Wheel/Threading Tapes 1 Non-Alloy Round/ Billets 1.10 kg Upto 5% of FOB value 1 MT 1 Stainless Steel Rod 1.10 MT/MT content in. 1 MT 1 Pig Iron 0.96 MT 2 Non Alloy Steel Melting Scrap MT 3 Ferro Silicon 50 Kgs 4 Pure Magnesium 3 kg 5 Hard Coke 175 Kg 6 Light Diesel Oil ltrs 7 Cement 91.8 Kgs 8 Blacking Powder 0.5 Kg 9 Mould Powder 1.8 Kg 10 Zinc Wire 7.6 Kg 11 Bitumen Solution 5.6 ltrs 12 Inoculants 2.5 Kg 13 High Alumina Refractory 20 Kgs C135

136 14 Gasket Net to net 15 Lubricant Net to net. Note:- 1. Import of Cement is to be allowed only in case is for "DI Pipes with Cement Mortar as inside lining. In case of DI Pipes withcement Mortar, the input quantities of other items covered by the list will be worked out based on export weight of DI Pipes minus the weight of Cement Mortar. Note : 2. Import of Gasket & Lubricants shall be on net to net basis with accountability and specification should match in import and export C636 C637 Electrolytic Tinplate Components Electronic Medical/Dental Instruments and Parts thereof: Motor Pinion ASI kg 1 Electrolytic Tinplate Prime MR Type 1 kg 1 Stainless Steel Rod AISI-416 Dia 4.0mm to 5.0mm 2 Fine Copper Grits for Blasting on S.S. components 3 Fine Brass Grits for Blasting on S.S. components 4 Chemical for Deburring & Polishing 5 Corrossion Protective Chemicals 6 Carbide Form Cutter (HOB) C kg 4.2 kg 7 Carbide Cutter Net to Net. 8 Collect Net to net 9 Guide Bush Net to net Note:- 1 Import item Nos. 2 to 6 are allowed in total Upto 2% of FOB value of export. C638 Element of Fuel Injection 1 kg 1 Alloy Steel Bars/Coils Type SAE 3.43 Kg Equipment 52100/Equivalent 2 Misc. Items: Upto 2% of FOB value of export. a) Gun Drill C639 C640 C641 C642 Round/Eliptical /Oval Tin Plate container and/ or components thereof End Clamp Fabricated Steel Hardware/ Structure/Articles not elsewhere specified made out of Non Alloy/Alloy/ Stainless Steel Plates/Sheets/Wide Coils/Strips Female Hinge b) Lapping Compound c) Honing Mandrels d) Solder Paste 1 Kg 1 Electrolytic Tinplate waste/waste 1.15 Kgs 1 kg. 1 Hot Rolled MS Sheet/ Strips/ kg Coils 2 Zinc kg 1 kg 1 Non Alloy/Alloy/ Stainless Steel Plates/Sheets/Wide Coils/Strips 2 Zinc Ingot (to be allowed only in case the product is Galvanised) 1 kg. 1 Hot Rolled MS Sheet/ Strips/ kg Coils 2 Zinc kg C643 Fitting made out of Non- 1 MT 1 Non-Alloy Steel 1.25 MT 1.05 kg/kg content in 1.04 kg/kg content in

137 C644 C645 C646 C647 C648 C649 C650 C651 Alloy Steel (Galvanised) Flange Plate Flexible Channel/Drop Channel/Rigid Channel Flexible Corrugated Stainless Steel Hose with Braidings of Stainless Steel Wire Floor Flange Floor Strainer/ Insect Stopper made of Stainless Steel Folding/straight Umbrella (Auto and/or Manual) Forged Eye Hoe (other than these covered by Sl No. 243 & 498) Fork C137 Rounds/Hexagons 2 Zinc Metal 0.04 MT 1 kg. 1 Hot Rolled MS Sheet/ Strips/ Coils kg 2 Zinc kg 1 kg 1 CRCA Steel Sheet/Coil ;in 0.3 mm and 0.45 mm thickness kg 2 Carbon Black 0.04 kg 3 Rubber Chemicals (Accelerator and Zinc Oxide) 0.01 kg 1 MT 1 Stainless Steel Sheet/Coils 1.25 MT/MT content in 2 Stainless Steel Wire 1.10 MT/MT content in export. 1 kg. 1 Pig Iron kg 2 Zinc kg 1 kg 1 Stainless Steel Sheet - AISI kg 1 Dozen 1 Water Proof Umbrella Nylon Cloth 2 Complete Umbrella Frames without handles & without cloth 2 a) Umbrella Tube with accessories 1.05 Sq. Yard/Sq. Yard content in export. 1.0 Dozen i) Tube Fitted with Notch 1.01 Dozen ii) Up Runners with Ring iii) Down Runners iv) Hooks 1.01 Dozen 1.01 Dozen 1.01 Dozen v) Springs 1.01 Dozen vi) Cap b) Umbrella Ribs 1.01 Dozen i) Big Fluted with Centre Clip 1.01 Dozen ii) Small Fuluted iii) Big Solid with Side Clip iv) Small Solid 1.01 Dozen 1.01 Dozen 1.01 Dozen v) Eyelates 1.01 Dozen 3 Umbrella Handles 1 Dozen 4 Polyester Tape width less than 2.4 Yards 2.5 Cms. 1 MT 1 Carbon Steel Plate 1.6 MT 1 kg. 1 Hot Rolled MS Sheet/ Strips/ kg Coils 2 Zinc kg C652 Fork Digging with socket 1Kg. 1 Non-Alloy Steel Round/ Billets 2Kg/Kg content in.

138 C653 Fountain Pen Nibs C654 Non Alloy / Alloy / Stainless Steel Fully Threaded Rods (Ungalvanized / Galvanized) C655 C656 C657 C658 Galvanized Curb Stake Gate Clip Gate Hold Back Gate Latch 100 Pcs 1 Stainless Steel Strips gms 2 Iridium Alloy Pen Points gms 1 MT 1 Non Alloy / Alloy / Stainless Steel / Bars & Rods (including Rounds & Wire Rods) of relevant grade MT 2 Zinc (against export of MT Glavanized Threaded Rods only) 1 MT 1 Non-Alloy Steel Wire Rod 1.05 MT/MT (5.5mm to 20 mm dia) 2 Zinc 3% of net weight of Steel to be Galvanised. 1 kg. 1 Hot Rolled MS Sheet/ Strips/ kg Coils 2 Zinc kg 1 kg. 1 Hot Rolled MS Sheet/ Strips/ kg Coils 2 Zinc kg 1 kg. 1 Mild Steel HR Sheets/ Strips/ kg Coils 2 Zinc kg C659 German Silver Art-ware 1 Kg 1 Coper Scrap 1.05 kg/kg net contents of the material in the export product 2 Zinc 1.05 kg/kg net contents of the material in the export product 3 Nickel 1.05 kg/kg net contents C660 German silver utensils 1 kg 1 German silver kg C661 Gun metal valves 1 kg 1 Gun metal scrap kg C662 Half Metal Ball Pen 100 pcs 1 Ball pen cap 102 Pcs 2 Ball Pen Barrel 102 Pcs C663 C664 Hand Sewing needles Hardened Twin Thread Bright Zinc plated clear Passivated Steel screws 3 Mechanism 102 Pcs 4 Pan Clips 102 Pcs 5 Ball Pen Tip 102 Pcs 6 Writing Inks 115 gms 1 Kg 1 High Carbon Steel Wire 1.15 Kg/Kg content in export 2 Nickel Anode/'S' Nickel kg/1000 Nos. of the hand Sewing Needles 1 kg 1 Cold Heading quality Aluminium Killed Steel Wire Rods C Kg./Kg. content in export 2 Zinc 0.01 Kg./Kg. of export 3 Misc. Items: Sodium Cyanide 99.99% Pure, Thread Rolling Dies, Punches, Lubricating/Cutting Oil C665 Heavy Duty 9 Tons 1 kg MS 1 MS Rounds 1.10 kg Limited to 5% of FOB Value

139 C666 C667 Tillers (Spring loaded without spring cultivator) Heavy duty Fork latch Galvanised Non alloy/ Alloy Steel Wire Ropes (fibre core) Round content 2 MS Plates 1.20 kg 3 MS Angles 1.10 kg 1 kg. 1 Hot Rolled MS Sheet/ Strips/ kg Coils 2 Zinc kg 1000 kg 1 Ungalvanised Wire of relevant 1.02 kg/kg content in grade of steel with or without rust. preventing coating like phosphating / greasing/waxing etc. 2 Zinc 62 kg 3 Sisal Core/ Sisal fibre 55 kg 4 Anti Rust Petroleum Based 20 kg Lubricant 4 a) Anti Rust Wax 6 kg b) Anti Rust Lubricating Oil 14 kg 5 Dry Drawing Lubricant/ Coating 8 kgs 6 Tungsten Carbide Dies 5 Nos 7 Lead (for patenting) 3.30 kg Note: 1. Items at Sl.No.5 to 7 shall not be allowed if the imported input is steel wire. 2. In case of galvanised steel wire ropes for oil, fishing and shipping industry if the product is as per ASTM A , for Class B and Class C coatings, the item Zinc shall be allowed two times and three times respectively of the Zinc quantity permitted above. 3. The CIF value of Lubricant shall not exceed 5% of FOB value. C668 Non alloy/ Alloy Steel Wire Ropes (fibre core) (Un-Galvanised) 1000 kg 1 Ungalvanised Wire of relevant 1020 kg grade of steel with or without rust preventing coating like phosphating / greasing/waxing etc. 2 Sisal Core/ Sisal fibre 55 kg 3 Lead (for patenting) 3.30 kg 4 Anti Rust Petroleum Based 20 kg Lubricant 4 a) Anti Rust Wax 6 kg b) Anti Rust Lubricating Oil 14 kgs 5 Dry Drawing Lubricant/ Coating 8 kgs 6 Tungsten Carbide Dies 5 Nos. Note : 1. Items at 3, 5 & 6 shall not be allowed if the imported input is steel wire. 2. The CIF value of Lubricant shall not exceed 5% of FOB value. C669 Non alloy/ Alloy Steel Wire Ropes (Steel Wire Core) 1 MT 1 Ungalvanised Wire of relevant 1020 kg grade of steel with or without rust preventing coating like phosphating / greasing/waxing etc. 2 Anti Rust Petroleum Based Lubricant 20 kg 2 a) Anti Rust Wax 6 kgs C139

140 b) Anti Rust Lubricating Oil 14 Kgs 3 Dry Drawing Lubricant/ Coating 8 Kgs 4 Tungsten Carbide Dies 5 Nos. 5 Lead (for patenting) 3.30 kg Note : 1. Items at Sl.Nos. 3 to 5 shall not be allowed if the imported input is steel wire. 2. The CIF value of Lubricant shall not exceed 5% of FOB value. C670 Galvanised Non alloy/ Alloy Steel Wire Ropes (Steel wire core) 1000 kg 1 Ungalvanised Wire of relevant 1.02 kg/kg content in grade of steel with or without rust. preventing coating like phosphating / greasing/waxing etc. 2 Zinc 62 kgs 3 Anti Rust Petroleum Based 20 kg Lubricant 3 a) Anti Rust Wax 6 kgs b) Anti Rust Lubricating Oil 14 kgs 4 Drawing Lubricant/ Coating 8 kgs 5 Tungsten Carbide Dies 5 Nos. 6 Lead (for patenting) 3.30 kg Note : 1. Items at Sl.Nos. 3 to 5 shall not be allowed if the imported input is steel wire. 2. In case of galvanised steel wire ropes for oil, fishing and shipping industry if the product is as per ASTM A , for Class B and Class C coatings, the item Zinc shall be allowed two times and three times respectively of the Zinc ingot quantity permitted above. 3. The CIF value of Lubricant shall not exceed 5% of FOB value. C671 High Chromium 1 MT 1 Mild Steel Scrap 0.90 MT Grinding media Balls for 2 HC Ferro Chrome 292 kg Cement Grinding Mills 3 Ferro Moly (Mo-75%) 10 kg (Composition: Cr %, Mo %, Si %, C %, Fe-Balance) 4 Fero Silicone (Silicon 75%) 10 kg C672 C673 C674 C675 C676 High pressure Seamless Gas Cylinders 1 Tonne (Weight of seamless Tube) 1 Seamless Steel Tube of relevent grade 2 Relevant Cylinder Valves 1 No. 3 Relevant Nipples for Cylinder Valve 1 No. Hinges and parts thereof 1 kg 1 MS Sheet/Coil 1.20 kg made of M.S. or Stainless Steel Stainless Steel Sheet/Coil 1.20 kg Hoe Welded Eye 1 kg carbon 1 Carbon Steel 1.20 kg a).hoe Blade steel content b).eye 2 MS pipe 1.05 kg Hose Assemblies with End Metal Fittings Hot Dipped Galvanised Tension Bar/ Gate Rods/ 1 Meter 1 Reinforced Relevant Rubber Hose 1 kg 1 Re-rollable scrap of Usable Scrap/Billet Cuttings 1.06 Kg/Kg content in Meters kg. C140

141 C677 C678 C679 C680 C681 C682 C683 C684 C685 C686 Truss Rods/ Drop Rods. Deleted Hurricane Lantern made of Tin plate Hypodermic Needles (Disposable or Reusable) ILD Fork ILD Guide Deleted Indust. Offset Bracket Industrial Locking Device Industrial Offset Hinge (Galvanised) MS Billets/Blooms 1.12 kg. Non-Alloy Steel Wire Rods 1.07 kg 2 Zinc 0.03 kg 1 No. 1 Tinplate Waste 1.10 Kg per kg content in export Nos (of Dia/Gauge "X") 1 Stainless Steel Capillary Tube of Dia/Gauge "X" 1 Stainless Steel Cannulae of Dis/Gauge "X" 1 Stainless Steel Strips (AISI 304L) C Mtrs Nos. 1.3 kg/kg content in export. 2 Polypropylene Granules 1.05 kg/kg content in export a) Brass Scrap kg/kg content in export b) Nickel Plate 5 kgs 3 Misc. Items: Drills, Cut off Wheels, Grinding Wheels, Glue. 1 kg. 1 Mild Steel HR Sheets/ Strips/ Coils Upto 5% of FOB value of export kg 2 Mild Steel Rounds kg 3 Zinc kg 1 kg. 1 Refractories porous Kg. plug/seat/blocks/sleeves/slide gate plate Hot Rolled MS Sheet/ Strips/ Coils kg 2 Zinc kg 1 kg. 1 Mild Steel HR Sheets/ Strips/ kg Coils 2 Mild Steel Rounds kg 3 Zinc kg 1 kg. 1 Mild Steel HR Sheets/ Strips/ kg Coils 2 Mild Steel Rounds kg 3 Zinc kg 1 No. 1 Mild Steel HR Sheet/Coil 1.10 kg/kg content in export 2 Mild Steel Rounds 1.05 kg/kg content in export 3 Pig Iron 1.10 kg/kg content in export 4 Zinc Upto 2% of weight of export Industrial Roller 1 kg 1 CR-Non Alloy Steel Chain(Above 1-1/4" Pitch Sheet/Coil/Welded/Seamless kg.

142 C687 C688 C689 Size) including Spares. Industrial Roller Chain(Above 3/4" Pitch and upto 1-1/4" Pitch) including Spares Industrial Roller/Motor Cycle/Automotive Timing chain including spares (Upto 3/4" Pitch Size ). Industrial Valve (Casr or Forged Body) Non-Alloy Steel Tubes 1 HR- Non Alloy Steel Sheet/Coil kg. 2 Alloy Steel Wire/Wire Rod in Coil 3 Spring Clip/Cotter Pin (Chain Component) 4 Misc. Items: Grease, Rust, Preventive Oil, Punching & Piercing Tools, Extruder Dies & Die Inserts, Sizing Rolls, Stamping Punches, HcHCr D2 & D3 material HSS M2 material, H11 hot die steel, O2 oilsteel. 1 kg 1 CR-Non Alloy Steel Sheet/Coil/Welded/Seamless Non-Alloy Steel Tubes kg. Net to Net Upto 3% of FOB Value of exports kg. 1 HR- Non Alloy Steel Sheet/Coil kg. 2 CR Alloy Steel Sheet/Coil kg. 2 HR-Alloy Steel Sheet/Coil kg. 3 Alloy Steel Wire/Wire Rod kg. 4 Spring Clip/Cotter Pin (Chain Component) 5 Misc. Items:Grease, Rust, Preventive Oil, Punching & Piercing Tools, Extruder Dies & Die Inserts, Sizing Rolls, Stamping Punches, HcHCr D2 & D3 material HSS M2 material, H11 hot die steel, O2 hardened steel. Net to Net Upto 3% of FOB Value of exports. 1 kg 1 CR-Non Alloy Steel kg. Sheet/Coil/CHQ Wire in Coil 1 HR Non Alloy Steel kg. Sheet/Coil/CHQ wire Rod in coil 2 CR Alloy Steel Sheet/Coil kg. 2 HR-Alloy Steel Sheet/Coil kg. 3 Alloy Steel Wire/Wire Rod kg. 4 Spring Clip/Cotter Pin (Chain Component) 5 Misc. Items: Grease, Rust, Preventive Oil, Punching & Piercing Tools, Extruder Dies & Die Inserts, Sizing Rolls, Stamping Punches, HcHCr D2 & D3 material HSS M2 material, H11 hot die steel, O2 oil hardenedsteel. 1 No. 1 1) Industrial X ray films (various grades of gamma rys iridium 192 and Cobalt 60 (B) For forged body/trims/cover - 1Kg Net to Net Upto 3% of FOB Value of exports. 11.8Sq.CM 1.35Kg. C142

143 C690 Cryogenic Tank for Liquified Gases 2 Forging quantity carbon/nonalloy/alloy/stainless steel bars/rods/billets/blooms/ingot (relevant material) 1) For Stem (weight 1 Kg) Stainless 1.1Kg Steel bar/rod of relevant grade 2) For opertor (hand 1.02Kg. wheel/lever/wrench) (1Kg) Carbon Steel Rod/Pipe/Plate 3) Asbestos free graphite/ptfe 1 Set. packing/gsket 4) Miscellaneous items like Tungsten carbide tip tools, dies, drills, taps die blocks/hrd facing electrode/power 3% of the FOB value. 1 For 1Kg of weight of Body, Trim Ball, Gate, Plug Disc, Cover, Bonnet. a) For Carbon/Non Alloy Steel casting (On the basis of net weight of the item and on net content) of items mentioned above:- Non Alloy Steel Melting Scrap 1.7Kgs. 1 b) For Stainless Steel Casting (On the basis of net weight of the item and on net content):- A) Stainless Steel Scrap 0.863Kg. B) Iron Flakes/pure Iron/Iron powder C) Ferro Chrome/Charge Nickel Oxide sinter/ferro Nickel 1 D) Ferro Chrome Nickel Ferro Manganese Ferro Molybdenum Ferro Silicon E) For both Stainless Steel and Carbon /Non Alloy Steel Casting:- Additive comprising of core wire/scrap/ingots/shots of Aluminium core wire/lumps Powder of Calcium Silicide (CaSi)Lumps powder of misch metal Ferro Silicon/Ferro Silicon Ferro Manganese C Kg Kg Kg Kg Kg Kg Kg. 0.05Kg for carbon steel casting and F) Resin Coated Sand 0.45Kg for carbon steel, Kg for Stainless Steel. G) Organic binders 0.2Kg. H) Welding Electrode Kg. I) Mold Wash/Mold Coat Kg. J) Grinding Wheel Kg. 1 No. 1 Hot Rolled Stainless Steel Plates 1.10 MT/MT content in 2 Boiler Quality Carbon Steel Plates 1.10 MT/MT content in 3 Stainless Steel Pipes Net to Net

144 C691 Integrated Watch Cases with/without Chain 4 Perlitte Insulating Powder Net to Net 5 CS Section Net to Net 6 SS Section Net to Net 7 Corrosion Resisting Bronze extended Stem Cryogenic Valves C144 Net to Net 8 Bronze Check Valve Net to Net 9 Safety Valve Net to Net 10 Pressure Building Regulator Net to Net 11 DP Level Gauge Net to Net 12 Misc. items: Welding Wire & Welding Flux Upto 5% of the FOB value of export 1 No. 1 Bezel Net to net. 2 Watch Glass Net to net. 3 Plastic Movement Holder Net to net. 4 Back Cover Net to net. 5 Watch Chain/ Bracelet Net to net. 6 Side Bar Pin Net to net. Note : 1. Item 5 to be allowed only when is accompanied with this item. C692 Items manufactured out of GP Sheets 1 kg 1 GP Sheets/ Coils/ Secondary kg C693 Items manufactured out 1 kg 1 Electrolytic Tin Plate/ Tin Plate kg of tin plate Waste/ Waste C694 J-Bracket 1 kg. 1 MS Round kg 2 Zinc kg C695 Jotter Ball Point Pen pcs. 1 SS Strips/ sheets/ coils 1.05 Kg/Kg content in export 2 SS Wire/Nickel silver wire/brass wire 3 SS Balls/Tungsten Carbide Ball/ Ceramic Balls 1.05 Kg/Kg content of relevant material in export 1020 No. relevant in export 4 ABS Powder 1.05 Kg/Kg content in export 5 Brass Tube/Rod Strip/Scrap 1.05 Kg/Kg content in export 6 Derlin powder/polyacetal Resin 1.05 Kg/Kg content in export 7 Refill Ink 1.02 Kg/Kg content in export 7 a) Ketonic Resin/Synthetic Resin 0.40 Kg/kg of ink content b) Glycol 0.40 Kg/kg of ink content c) Dyestuff 0.10 Kg/kg of ink content C696 Jotter refills 1 kg. 1 Copper tube kg C697 Knitting Needles/ Pins- Double ended made out of Aluminium 1000 Sets each (34.5 kgs) 1 Aluminium Rods kgs Kgs. 1 a) Aluminium Wire (Not below Kgs.

145 C698 C699 C700 Knitting Needles/ Pinsknobbed made out of Aluminium Knitting Needles/ Pinsknobbed Plastic Lever Latch for Locking Ring 1000 Nos/Pairs (5.714 Kgs) 1000 Nos/Pairs (12.0 Kgs) 3mm) 1 Aluminium Rods C kgs 1 a) Aluminium Wire (Not bwlow 5.999Kgs. 3mm) 1 Relevant Plastic material 12.6 kgs 1 MT 1 HR/CR CA Steel Sheet/Coils/Strips 1.46 MT 2 Zinc 4% of the net weight of the steel to be galvanised. Note : Import item 2 i.e. Zinc to be allowed only in case is galvanised. C701 Locks and valves water pipe filling 1 kg 1 Pig Iron kg C702 Loop cap 1 kg. 1 Cold Rolled MS Sheets/ Strips/ kg Coils 2 Zinc kg C703 C704 Loop Cap LPG Cylinders with/or without valves 1 kg. 1 Pig Iron kg 2 Zinc kg 1 No. 1 Valves Net to Net 1 Brass Scrap 1.12 Kg/Kg content in. 2 HRMS Sheet/ Plates HRMS Cells 1.35 kg/kg content in kg/kg content in. 3 M.S. Round Bars 1 Kg/Kg content in. 4 Zinc Ingot 0.17 kg per Cylinder. 5 Misc. items: Copper Coated Steel 3% of the FOB value. Wire of dia 3.15mm and 0.8mm, Welding Flux/ Rod, L.D.O., Primer Point, Shot/ Grits, D.D. Compound Note 1. Item No. 1 will be allowed if Cylinders are exported with Valves. 2. Zinc Ingot will be alowed if the Cylinders are exported with Zinc coating. 3. Packing material may be allowed as per packing policy. C705 M.S. Fish Plate 1 Pair 1 M.S. Billets 1.12 kg/kg content in. C706 M.S. Tubular Folding Furniture with Plastic Fittings 1 kg 1 Colled Rolled Mild Steel Strips 1.05 Kg./Kg. content in 2 Spring Steel Wire 1.05 Kg./Kg. content in 3 P P Granules 1.05 Kg./Kg. content in. 4 Grey/ Pulp Board (Furniture Grade) 1.05 kg/kg content in. 5 Powder Paint (Solid based) 1.05 kg/kg content in. 6 Relevant PVC Fabrics 1.02 kg/kg content in

146 C Relevant PU Foam 1.02 kg/kg content in. 8 Relevant Synthetic Fabric (Polyester Based) 1.02 kg/kg content in. Note: Import of powder paint (Solid Based) will be kg/kg content for furniture having powder paint coating only. C707 M.S. Washer Galvanised/painted 1 Kg 1 CRCA/HR Mild Steel Sheets/ Coils/Strips(including Seconds/Defective). 2 Zinc Paint Coating Powder 1.50 Kgs Note.1 : Import of CRCA is allowed only if is made out of CRCA. C708 Male Bracket 1 kg. 1 Mild Steel HR Sheets/ Strips/ kg Coils 2 Mild Steel Rounds kg C709 C710 C711 C712 Male Hinge/ Male Bracket Male Lag Bracket Malleable Box Hinge Manually Operated 35mm Camera with Built in Flash 3 Zinc kg 1 kg. 1 Mild Steel HR Sheets/ Strips/ kg Coils 2 Mild Steel Rounds kg 3 Zinc kg 1 kg. 1 MS Round kg 2 Zinc kg 0.04 Kg (Hot dip Galvanised or 0.01Kg if Electro Plated). 4% of the FOB value. 1 kg 1 MS HR Sheets/Coils 1.06 kg/kg content in export 2 MS Rounds 1.20 kg/kg content in export 3 Pig Iron 1.05 kg/kg content in export 4 Zinc kg/kg of galvanised items in 1 No. 1 ABS Moulding Powder/Granules 1.05 kg/kg content in. 2 Poly Acetal Moulding Powder/Granules 3 Polycarbonate Moulding Powder/Granules 4 PMMA(Polymethyl- Methacrylate Moulding Powder Granules) 1.05 kg/kg content in kg/kg content in kg/kg content in. 5 Transistors Net + 2% wastage. 6 Flash Kit Module, consisting of Net + 2% wastage. PCBs, Capacitors, Trsnsformers, Triggers Coils, Neon Capacitor, Triggers, Diode Resistors, Triggers, Contact & Flash Tube 7 Phospher Bronze Scrap 1.05 kg/kg content in. 8 Anodised Aluminium Reflector Sheet/Coil 1.05 kg/kg content in. 9 Taking Lens Front & Rear Net to net.

147 C713 C714 C715 Marine freight containers of type ICC 20'x8'x8.5' Mechanical Watch Movement Automatic Day & Date Metal Casing Vaccum Flasks (Made from Tin Plates) 10 Neon Window Net to net. 11 Springs Set(of 8) Film Counter, Net + 2% wastage. Shutter Sector, Pressure Plate,Sprocket Axle, Lens Covers 22Screws (8 No./Set) 12 Screws (8 No./Set) Net + 2% wastage 1 No. 1 Carbon steel Hot Rolled kg Sheets/Plates BS B & IS 1079 ST mm to 3mm thickness 2 Hot Rolled Alloy Steel Sheets/ Plates Carton-A 2mm & 1.5mm thick kg 3 Paints 60 Ltr 1000 Nos 1 Movement Components Net to net 1 No. (1000 ml) 1 Polypropylene 1.05 kg/kg content in 2 Tin Plates 1.10 kg/kg content in 3 Chemicals for Glass Shell: a) Borax 80 gms. b) Selenium 2 gms. c) Arsenic 2 gms. d) Soda Ash 100 gms. e) Sodium Silico Fluoride 25 gms. f) Silver Nitrate 1.5 gm. g) Caustic Soda 25 gms. h) Silicon Oil 0.5 gm. C716 Metal Clips for Pens. 1 kg 1 S S Strips 1.05 kg C717 Metal Fountain Pens 100 pcs 1 Barrel 102 Pcs 2 Cap 102 Pcs C718 Mathematical Instrument Box with/without PVC Trey 3 Clips 102 Pcs 4 Printing Ink 1.05 gm 1 No. 1 M.S. Sheet Defective Tin Free(For Box) 1.05 kg/kg content in. 2 M.S. Sheet (For Compase) 1.05 kg/kg content in. 3 PVC Granules (For Trey) 0.8 kg/kg content of PVC Trey. 4 Polystrene (For Plastic Article) 1.05 kg/kg content in export. 5 Poly Propylene 1.05 kg/kg content in export. C719 Mild Steel Hollow Rivets 1 kg 1 Mild Steel Wire/Wire Rods 1.2 kg C720 Mild Steel Rivets 1 kg 1 Mild Steel Wire/Wire Rods 1.06 kg C721 MS Aldrop-Nickel Plated 1 kg 1 CRCA Sheet/Second Grade 1.30 kg/kg of net content in the export product. C147

148 C722 C723 M.S. Bucket Handle Duly plated with nickel or Copper or Zinc/Powder Paint Coated MS Colour coated Ghamala(made of HR Sheet) 2 Low Carbon Wire Rod 1.12 kg/kg of net content in the export product 3 Nickel 0.01 kg/kg of the steel to be plated 1 kg 1 M.S. Wire Rod 1.05 kg. 2 Nickel 0.97% of weight of Steel to be Nickel Plated. Zinc 0.97% of weight of Steel to be Zinc Plated. Copper 0.97% of weight of Steel to be Copper Plated. Powder Paint 0.97% of weight of Steel to be Powder Painted 1 MT 1 H R Sheets 1.16 Tonne C724 MS Drum 1 kg 1 CRCA Sheet kg C725 MS Paper pin & Clip 1 kg 1 M.S. wire 1.05 kg C726 MS Washer 1 kg 1 CRCA/H.R. Mild Steel Sheets/ 1.50 kg Strips/Coils (including seconds and defective). Note : 1. In case, is Hot Dip galvanised, in addition to above items, an additional item Zinc shall be 4% of net weight of Steel in. In case the product is electroplated, Zinc shall be 1% of net weight of steel in export. C727 MS Window, Door Ventilator, Grate/ Grills, Fabricated Frames and components thereof 1000 kg 1 Non Alloy Steel Billets 1070 kg C728 Needle Roller Bearing Nos. 1 Steel strips 25CrM04/RST3/ kg. mm to below 50 mm I.D. CK15/C15M/ equivalent 2 Steel wire SAE 2100/100CR6/SUJ2/ equivalent kg. C729 Needle Roller Bearing Type BK/ HK/SCE/SCH below 25 mm I.D. 3 Miscellaneous Items: Grinding Wheel, Work Rest Blade, Green Silicon Carbide, Rust Preventive Chemical, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda C148 upto 5% of FOB value of exports Nos. 1 Steel Strips to kgs. 25CrM04/RST4/RST3/ CK 15/CI15M/ equivalent 2 Steel wires to SAE 5.60 kgs /100CR6/ SUJ2/equivalent 3 Steel cage 1100 Nos. 4 Misc. Items: Grinding Wheel, upto 5% of FOB

149 C730 C731 C732 C733 Needle Roller Bearing Type BK/ HK/SCE/SCH/MNJ 25 mm I.D. Needle Roller Bearing Type BU/ HN/BN/HV below 25 mm I.D. Needle Roller Bearings type - KZK upto 30 mm OD Needle Roller Bearings Type -K/KBK upto 20 mm OD. Work Rest Blade, Green Silicon, value of exports. Rust Preventive Chemical, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda 1000 Nos. 1 Steel Strips 25 CrM04/RST kg. RST3/CK15/C15M/ equivalent 2 Steel cage 1100 Nos. 3 Steel Wire SAE 2100/100CR6/SUJ2/ equivalent 4 Misc. Items: Grinding Wheel, Work Rest Blade, Green Silicon Carbide, Rust Preventive Chemical, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda 1000 Nos. 1 Steel Strips 26CrM04/RST3/ CK15/C15M equivalent 2 Steel Wire SAE 52100/100CR6/ SUJ2 equivalent 3 Misc. Items: Grinding Wheel, Work Rest Blade, Green Silicon Carbide, Rust Preventive Chemical, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda 1000 Nos. 1 Steel Strips 25 Cr MO 4 Rst4 or equivalent 2 Steel Wire SAE 52100/100 Cr16 or equivalent. 3 Misc. items: Grinding Wheel, Work Rest Blade, Green Silicon Carbide, Rust Preventive Chemicals, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing compounds, Soda Ash, Caustic Soda, Coolant, Blackening Salt, Hydraulic oil, Trichloro ethylene Nos. 1 Steel Tubes SCM 415/Rst 3/C15/STKM or equivalent 2 Steel Wire SAE 52100/100 Cr6 or equivalent 3 Misc. Items:Grinding Wheel, Work Rest Blade, Green Silicon Carbide,Rust Preventive Chemicals, Molykote DX, Packing Grease, Carbide Tips,O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon,Polishing compounds, Soda Ash, Caustic Soda, Coolant, C kgs. upto 5% of FOB value of exports kg 9.57 kg. upto 5% of FOB value of exports kg kg. Limited to 5% of FOB Value of exports kg 8.3 kg Limited to 5% of FOB Value of exports.

150 C734 (a) Needle Rollers upto 4 mm Dia (b) Needle Rollers above 4 mm to 8mm Dia Needle Rollers above 8 mm Dia C735 C736 C737 C738 C739 Needle Screws Self colour or Plated Nickel Plated M S Buckles Non-Alloy Steel Wire Nails (excluding Stainless Steel) Nuts/Bolts/ Screws made of Stainless Steel of variety-x Nyloc Self Locking Nuts, Steel Locking Nuts and Wheel Nuts made from 1 kg 1 kg 1 kg C150 Blackening Salt, Hydraulic oil, Trichloro ethylene. For (a): 1 Steel wire to SAE 52100/100 CRG/ SUJ2/equivalent 2 Misc. items: Grinding Wheel, Work Rest Blade, Green Silicon Carbide, Rust Preventive Chemical, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda For (b): 1 Steel Wire to SAE 52100/ 100 CRG/ SUJ2/ equivalent 2 Misc. items: Grinding Wheel, Work Rest Blade, Green Silicon Carbide, Rust Preventive Chemical, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda For (c): 1 Steel Wire to SAE 52100/ 100 CRG/ SUJ2/ equivalent 2 Misc. items: Grinding Wheel, Work Rest Blade, Green Silicon Carbide, Rust Preventive Chemical, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda 1 kg 1 High Carbon and high chromium Steel wire 1 MT 1 MS Seconds defective sheets/coils strips 1.45 kg. Upto 5% of FOB value of exports kg Upto 5% of FOB value of exports kg Upto 5% of FOB value of exports kg 1.10 MT/MT content in export 2 M S Wire 1.05 MT/MT content in export 3 Nickel Limited to 1% of weight of resultant product 1 M.T. 1 Non Alloy Steel Wire Rod 1.1 MT (excluding Stainless Steel Wire Rod) 1 kg 1 Stainless steel Rods/ Wire Rods/ Wire/ ingots of variety-x 1 MT 1 EN/ AISI/ DIN/ JIS Series Steel excluding Stainless Steel in the form of Wire Rods/HEX Bars in Coils and /or Straight length 1.27 kg MT

151 C740 EN/ AISI/ DIN/ JIS Series Steel excluding Stainless Steel Offset Rail End C741 OTS cans for packing gms of instant Coffee C742 OTS Cans/ dingeley cans (Seam Welded). 1 kg. 1 Cold Rolled MS Sheet/ Strips/ kg Coils 2 MS Plate kg 3 Zinc kg 1 kg 1 Tin Plate Prime kgs 2 Lining Compound kg 1 kg 1 Electrolytic tin plate 1.10 kg 2 Lining Compound kg Note: Item No 3 shall be allowed in case of export of Lacquered Can C743 Oxygen Cylinder dia 140 MM C744 Oxygen Cylinder dia 229 MM C745 Paddy Thrasher C746 C747 Panel Clamp Panels made of CRCA Sheets 3 Tin plate Lacquer ltr 1 No. 1 Hot Rolled CRMO Seamless SteelTube/Pipes. 1 No. 1 Hot Rolled CRMO Seamless SteelTube/Pipes. 1 Number. 1 MS CRCA sheet/ coil/ strips including seconds/ defectives but excluding coated C kg kg 1.08 kg/kg content in. 2 MS Plates 1.08 kg/kg content in. 3 Mild Steel Angles/Shapes/Section kg/kg content in. 4 MS Rounds 1.10 kg/kg content in the export prdouct. 1 kg. 1 Hot Rolled MS Sheet/ Strips/ Coils kg 2 Zinc kg 1 kg. 1 Mild Steel CRCA Sheets/ Cuttings/ Coils 1.05 kg/kg content in. Note: In case is Epoxy coated, Epoxy powder upto 4% of FOB value of exports shall also be allowed. C748 Paper Punch 1 kg 1 Cold Rolled Non Alloy Steel/ 1.56 kg Strips/Sheets. C749 C750 C751 C752 Pen Barrels Pen Caps Perforated Construction Stakes (Round /Flat/ Square) Photo frame made of Brass. 1 kg 1 Brass Scrap kg/kg content in. 1 S S Steel tubes 1.02 kg/kg content in. 1 kg 1 Brass Scrap kg/kg content in. 1 S S Steel Tubes 1.02 kg/kg content in. 1 MT 1 Non-Alloy Steel Billets / Ingot / Blooms / Slabs Non-Alloy Steel Bars & Rods (Round / Flat / Square including in coil form)/ Wire Rods 1.10 MT/MT content in MT/MT content in 1 kg 1 Brass Sheet kg/kg content of Brass in the export product.

152 2 Tin/Nickel. The CIF Value taken together may be restricted to 4% of the FOB value. 3 Hard Board kg/kg content in. 4 Glass kg C753 C754 Photo-Engraving Zinc Sheets Pilfer Proof Caps- Plain/Printed with E.P. Liners 1.0 Kg 1 Zinc Ingot 1.04 kg./kg content of Zinc in export 1 kg 1 Aluminium Sheet/Coils 1.1 kg/kg content in. 2 LDPE 1.05 kg/kg content in. 3 Printing Ink kg 4 Coating Laquer/Varnish Ltr. "Note: The import item No. 3 i.e. Printing Ink will be admissible only when is printed." C755 Deleted C756 Deleted C757 Deleted C758 Deleted C759 Deleted C760 Deleted C761 Deleted C762 Deleted C763 Deleted C764 Deleted C765 Deleted C766 Deleted C767 Pole Line Hardware 1 MT 1 High Tensile Steel and Mild 1.05 MT Fittings & Accessories Steel Billets/Angles/Plates (Galvanised) 2 Unwrought Zinc 0.05 MT C768 Post Cap 1 kg. 1 Cold Rolled MS Sheets Strips/ kg Coils 2 Zinc kg C769 C770 C771 C772 Post Cap Presensitised Positive Offset Aluminium plates Pressure Stoves/ kerosene burners/ pressure lamps blow lamps/ pressure lanterns/ fancy light fittings made of brass Primary/ Secondary Blades of Shaving system cartridges (for Twin 1 kg. 1 Pig Iron kg 2 Zinc kg 1 Sq. mt 1 Aluminium Sheet 1.05 kg/kg content in. 2 Diazo 2.76 gms/sq mts 1 kg 1 Brass Scrap kg One Million Nos. 1 CRSS Strips 433 kgs C152

153 C773 C774 C775 C776 C777 C778 C779 C780 C781 C782 C783 Blade) Printed Lug Cap with Internal Coating Lined with PVC compound PVC Co-extruded Galvanised Non- Alloy Steel Wire Racks made of CRCA Sheets Rail End Rakes/Garden Rakes/ Fork Manure Hooked 1 kg 1 Tin Plate Prime 1.30 kg 2 PVC Compound 1.05 kg/kg content in. 3 Terpentine Ltr. 1 MT 1 Non-Alloy Steel Rod 1.05 MT/MT content in. 2 Zinc Ingot 4% of net weight of steel to be galvanised. 3 PVC Resin 0.8 kg/kg of PVC compound in export. 1 kg content of import item 1 Mild steel CRCA Sheets/ cuttings/ coils/ defective/ secondary 1.05 kg 1 kg. 1 Cold Rolled MS Sheet/ Strips/ kg Coils 2 MS Plate kg kg Content of Import Item Rectangular tops fitted 1 kg of Top with screw neck & handle and Bottom and bottoms Rectangular/ Square Tin Plate container and/ or components thereof Rectangular/Square Tin Plate container and/or component thereof with round neck. Rings, Lid and Tagger Assemblies with or without Tagger (with or without matching Bottom Piece) made of Tin Plate Round Tin Containers (other than OTS cans) and parts thereof Round tops/ ends (bottoms) of containers made of Tin Plate 3 Zinc kg 1 Non-Alloy Steel Round/ Billets HR Sheets/Coils(Seconds) 1 Electrolytic Prime quality Tin Plate kg 1.10 kg kg 1 Kg 1 Electrolytic Tinplate waste/waste 1.10 kgs 1 Kg 1 Electrolytic Tinplate waste/waste 1.15 kgs 1 kg Ring, Lid and Matching Bottom Piece(excludi ng Tagger) 1 Electolytic Prime Quality Tinplate/ Tin Plate Waste/ Waste` 1.50 kg/kg content in 2 Lining Compound (Item to be specified) 3 gms 3 Aluminium Foil 1.08 kg/kg content in 1.0 Kg 1 Electrolytic Tinplate 1.15 kg Waste/Waste 1 kg 1 Electrolytic Prime Quality Tin Plate/ Tin Plate Waste/ Waste C784 Rounda File System 1 MT 1 ABS Moulding Powder(Injection Moulding Grade) 1.25 kg 1.05 MT/MT content in. C153

154 C785 C786 C787 C788 C789 C790 C791 Rubber Wheel Saddle Clamp Sanitary and bathroom fittings made out of Brass/aluminium Sanitary and bathroom fittings (of gun metal) Sanitary and Bathroom Fittings including parts/components thereof made of Brass (Nickel/Chrome Plated). Scrool Seamless Stainless Steel Tubes (Cold Finished) 2 Non-Alloy Steel Rounds 1.80 MT/MT content in. 3 Ball Bearing(Relevant) Net to net. 4 M.S. Tube/Pipe 1.05 MT/MT content in. 1 kg. 1 Mild Steel HR Sheets/ Strips/ Coils kg 2 Natural Rubber kg 3 Zinc kg 1 kg. 1 Hot Rolled MS Sheet/ Strips/ Coils kg 2 Zinc kg 1 kg 1 Brass/Aluminium Scrap Brass/Aluminium Ingot. 1 kg 1 Gun metal scrap Gun metal Ingot. 1 kg 1 Brass Ingot Brass Scrap kg 1.05Kg/Kg kg 1.05Kg/Kg kg/kg content of Brass in export product kg/kg content of Brass in export product. 2 Nickel/Chrome Upto 0.5% of the net weight of the export product. 1 kg. 1 Hot Rolled MS Sheet/ Strips/ Coils kg 2 Zinc kg 1 MT 1 Stainless Steel Bars/ Billets/ 2.0 MT Blooms 2 Band Saw Blades 0.74 Nos 3 Glass Powder kg 4 Lubricating Oil for Cold Pilgering 5 Billet Radiusing Inserts 6 BTA Heads 3.00 Gallons ( Ltrs) Import of item 5 & 6 together is restricted to a maximum value of 3% of total FOB value C792 Seamless Stainless Steel 1 MT 1 Nickel Oxide/Ferro Nickel MT Tubes (Cold Finished) 2 MS Melting Scrap MT (Stainless steel grade- 3 Band Saw Blades 0.74 No 304/304L/321) 4 Glass Powder Kgs C793 Seamless Stainless Steel Tubes (Cold Finished) (Stainless steel grade- 316/316L/316 TI) 5 Lubricating Oil for Cold pilgering 3 Gallons ( Ltrs) 1 MT 1 Nickel Oxide/Ferro Nickel MT 2 Molybdenum Oxide/ Ferro MT Molybdenum 3 MS Melting Scrap MT 4 Band Saw Blades 0.74 No 5 Glass Powder Kgs C154

155 C794 Seamless Stainless Steel Tubes/ Pipes (Hot Finished) 6 Lubricating oil for Cold Pilgering 3 Gallons ( Ltrs) 1 MT 1 Stainless Steel Bars/ Billets/ Blooms 2 Band Saw Blades 3 Glass Powder 4 Billet radiusing inserts. 5 BTA Heads C MT Note : The quantity permissible in respect of import items at Sl. No. 2,3,4, and 5 taken together will be restricted to 4% FOB value of exports C795 Seamless Stainless Steel 1 MT 1 Nickel Oxide/Ferro Nickel MT Tubes (Hot Finished) 2 MS Melting Scrap MT (Stainless steel grade - 3 Band Saw Blades 0.52 No 304/304L/321) 4 Glass Powder Kgs C796 C797 C798 Seamless Stainless Steel Tubes (Hot Finished) (Stainless steel grade - 316/316L/316TI) Seamless Steel Pipes and Tubes (other than Stainless Steel) Hot Finished. Seamless/Butt Welded Steel Pipe Fittings made from Seamless/ ERW Steel Tubes. 1 MT 1 Nickel Oxide/Ferro Nickel MT 2 Molybdenum Oxide/Ferro MT Molybdenum 3 MS Melting Scrap MT 1.0 kg Content of Import Item 4 Band Saw Blades 0.52 No. 5 Glass Powder Kgs 1 Alloy/ Non-Alloy Steel Billets/ Rounds/ Bars 1 MT 1 Alloy/ Non-alloy Steel seamless/ ERW Tubes/Pipes 1.20 kg C799 Self Tapping Screw 1 kg 1 MS Wire Rod 1.17 kg C800 Sewing Machine Needles 1 kg 1 High Carbon Steel Wire Annealed and Fully Spheroidised in mmdiameter or Diameter of the Wire to be used/required C801 C802 C803 C804 C805 C806 Shaft "A" (Part of Computer Printer) Shoe tacks made of CRCA Shoulder Bolt made out of CHQ Alloy Steel/ Stainless Steel Deleted Shuttering Clamps/ Column Clamps Folding Bed made of Mild Steel 1.10 MT/MT content in 1.25 kg/kg content in export. 1 MT 1 Steel Rod AISI 12L MT/MT content in. 1.0 Kg 1 CRCA Sheets/ Coils/ Strips/ seconds/ defective 1.05 Kg 1 Kg 1 Relevant CHQ Alloy Steel/ 1.65 Kgs Stainless Steel Wire Rods in coils or Bars 1 kg 1 M.S. Wire Rod 1.05 kg/kg content in export. 2 H.R. Sheets/Coils 1.05 kg/kg content in export. 1 kg 1 MS Defectives (Hot rolled only) kg C807 1 Kg 1 Alloy Iron powder Kg

156 C808 C809 C810 C811 C812 Sintered Alloy Iron Bushes & Parts Sleeve Sleeve Bracket Snap Fastners consisting of Stud & Socket Snap Off Blade Cutter of different size Soft Box (for use with Electronic Studio Flash Lights) 2 Solid Lubricant kg 3 Lubricating Oil kg. 4 Misc. Items: Natural Graphite Powder/Manganese Sulphide CIF Value not to exceed Rs. 1.70/kg of Powder, Jig Grinding Wheels and product exported. Honing Stones 1 kg. 1 Hot Rolled MS Sheets/ Strips/ Coils kg 2 Zinc kg 1 kg. 1 Mild Steel HR Sheets/ Strips/ kg Coils 2 Zinc kg 1 Kg 1 Brass Strips 1.15 kg./kg content in. 2 Phosphor Bronze Wire 1.04 kg./kg content in. 1 MT 1 ABS Copolymers 1.05 MT/MT content in export. 2 Snap Off Blades of relevant size Net to net. 1 No. 1 Reflective Cloth Net + 15% wastage. 2 Diffusion Cloth Net + 5% wastage. 3 Nylon Ribbon 1" Net to net. 4 ABS Moulding Powder Net + 5% wastage. 5 CRCA Sheet Net + 10% wastage. 6 Carbon Steel Pipe Net + 2% wastage. C813 Spade/Shovels 1Kg. 1 Non AlloyHR/CR Steel 1.10Kg/Kg content of Sheets/Strips/Wide Coils relevant steel in the Stainless Steel. Sheets/Strips/Wide Coils C814 Split Air Conditioner 1 No. 1 Compressor 1 No. capacity (1.5 Ton & 2 Bearing Assembly 1 No. above) 3 Grill Assembly (in) 2 Nos. 4 Grill Assembly (out) 1 No. 5 Air Filter 2 Nos. 6 Panel Assembly (Ornament) 1 No. 7 Panel Side RH 1 No. 8 Panel Side LH 1 No. 9 Propeller (Fan) 1 No. 10 Couplers Set/Valve Shut-off (14 1 Set. Pieces) 11 Control Assembly 1 No. 12 Copper Tube 1.01 kg/kg content in 13 Fractional HP Motor (O) 1 No. 14 Steel Sheets (GP & CRCA) 1.05 kg/kg content in 15 Capacitor-36 MFD, 440 V. 1 No. 16 Fractional HP Motor (I) 1 No. 17 Copper Corollary 0.35 kg. C156

157 18 Turbo Tube 1 No. C815 C816 C817 C818 C819 C820 C821 C822 C823 Spot Grid Stainless Steel Cannulaes made out of Stainless Steel Tubes/Wires Stainless Steel Casserole with copper bottom of 19 Aluminium Foils 1.02 kg/kg content in 20 Eco-Friendly Refrigerant Gas Net to net 21 Syncronous Motor 1 No. 22 Powder Paint Within 0.5% of FOB value of export product 1 No. 1 Aluminium Foil Formed: a) Rectangular/Square Grid 1.07 Sq.ft./Sq.ft. content in export. b) Round Grid 1.07 Sq.ft./Sq.ft. content in export. 2 CRCA Sheet 1.10 kg/kg content in export Nos. 1 Stainless Steel Capillary Tubes/Wires 30G-16G size 2 Grinding Wheel Grit size 3 Glass Beads 1 kg 1 kg 1 C R Stainless Steel Sheets/Coils AISI kg/kg content in export No kg/kg content in different sizes 2 Copper Sheets 2 MM 1.05 kg/kg content in Stainless Steel Collar for electric lamps Stainless Steel Cutlery with or without handle irrespective of what material the handle may have been ma de of. S.S. Fabricated/Welded Pipes/Tubes Stainless Steel Fabricated Tower Packing Stainless steel FJ-500 Food Jar with Polypropylene cup & stopper Stainless Steel Frypan with copper bottom of 1 MT 1 Stainless Steel Strips of relevant gauge 1 Kg 1 Non-Magnetic Stainless Steel/Magnetic Stainless Steel (only relevant grade of stainless steel to be allowed) 2 Misc.Items: Die-Steels & HSS cutting tools, Coated abrasive cloth belts, brushes & Wheel, Non-woven cloth pads, wheels & brushes (both impregnated & nonimpregnated), Sisal Fibre and Sisal Buffs & Bonded Emery Grinding wheel 1 MT 1 Stainless Steel Plates/Sheet/Strips/Wide Coils of relevant grade & specification 1 MT 1 Cold Rolled Stainless Steel Wide Coils of relevnt grade in various thickness 2.10 MT/MT content in export 1.40 Kgs CIF value Limited to 5% of FOB value 1.10 MT 1 Kg. 1 Stainless Steel Sheet 0.89 Kg 2 Polypropylene Kg 3 Silicon rubber for 'O' ring Kg 4 Natural rubber Kg 5 Printed Carton boxes Net to net 1 kg 1 Stainless Steel Sheets conforming to AISI MT/MT content in the of export product kg/kg content in different sizes 2 Copper Sheets 2 MM 1.05 kg/kg content in C157

158 C824 C825 C826 C827 C828 C829 Stainless Steel Hospital Wares (Other than those covered by Sl.No 825 ) Stainless Steel Hospital Wares (Rectangular/Square with straight edges) Stainless Steel Kitchen Sinks. Stainless Steel Knives of various sizes Stainless Steel Pressure Cooker with Copper Bottom/ Capsuled Bottom (Sandwich Bottom) of different sizes Stainless Steel safety razor Blades 1 kg 1 Magnetic/ Non Magnetic 1.30 kg Stainless Steel Sheets/Coils (only relevant material and grade of Stainless Steel to be allowed) 2 Miscellaneous Items: CIF Value Limited to 5% of FOB Value Die Steel & HSS Cutting Tools, Coated abrasive cloth belts, brushes & wheels, Non - woven cloth pads, wheels & brushes (both impregnated & non - impregnated), Sisal Fibre & Sisal Buffs & Bonded Emery Grinding Wheels 1 kg 1 Magnetic/Non/magnetic Stainless Steel Coils/Sheets (only relevant material and grade of stainless steel to be allowed) kg 2 Misc. Items: CIF Value Limited to 5% of FOB Value Die Steel HSS Cutting Tools, Coated abrasive cloth belts, brushes & wheels, Non-woven cloth pads, wheels & brushes (both impregnated & non- impregnated, Sisal Fibre & Sisal Buffs & e)bonded Emery Grinding Wheels 1Kg. 1 Stainless Steel Sheets/Wide Coils of relevant grade 1 kg 1 Stainless Steel Sheet/Wild Coil AISI Kgs Kg./Kg. content in export product. 2 Polypropylene 1.05 Kg./Kg. content in export. 1 kg 1 Stainless Steel Sheets conforming to AISI Million (double edge blades) 1.30 kg/kg content in 2 Copper Sheets 2 MM 1.05 kg/kg content in 1 Cold Rolled Medium/ High Carbon Martensitic Stainless Steel Strip in Coils (thickness: / mm, width: /-0.00mm 1 Cold Rolled Medium/ High Carbon Martensitic (Semifinished) Stainless Steel Strips in coils (Thickness: mm, width: mm) Hot Rolled Medium/ High Carbon Martensitic Stainless Steel Strip in coils (Thickness: mm, Width: mm) 988 Kgs kgs 1522 kgs C158

159 2 Cellulose Film/BOPP Film (Wrapper for packing) 3 Hanging Cards (20 tucks in a card) C kgs Nos 4 Tucks (5 blades) Nos 5 Vydax/Krytox Kg 6 Alumina Abrasive Grinding Wheels (OD 205 mm Maximum x ID 55 mm Minimum x Width 130 mm Maximum) 2 Pcs Note.1. Import of handle may also be allowed on net to net basis with accountability clause where the product is exported alongwith the handle. C830 C831 C832 C833 C834 Stainless Steel Saucepan with copper bottom of 1 kg 1 Stainless Steel Sheets conforming to AISI kg/kg content in different sizes 2 Copper Sheets 2 MM 1.05 kg/kg content in Stainless Steel Seamless Tubes/Pipes (Cold Finish) Table, Kitchen & other household articles made of Stainless Steel with or without handle/ Iid/ antiskid gasket irrespective of what material the handle/iid/ antiskid gasket may have been made of (other than those covered under the SION C-833) Table, Kitchen & other household articles made of Stainless Steel with or without handle/ Iid/ antiskid gasket irrespective of what material the handle /Iid antiskid gasket may have been made of (rectangular/ square with straight edges) Stainless Steel Vacuum Flask 1 MT 1 Seamless Stainless Steel Tubes/Pipes (Hot Finished) (OD not less than 42 mm) 2 Consumables viz. Band Saw Blades/ Lubricating Oil 1 kg 1 Magnetic/Non-magnetic Stainless Steel Sheet/Coils 1.35 MT Upto 2% of FOB value of export kg/kg content in. 2 Misc. Items: CIF Value Limited to 5% of FOB Value Die steel & HSS Cutting Tools, Coated abrasive cloth belts, brushes & wheels, Non-woven cloth pads, wheels & brushes (both impregnated & non - impregnated), Sisal Fibre & Sisal Buffs & Bonded Emery Grinding Wheels 1 KG 1 Magnetic/Non-magnetic Stainless Steel Sheet/Coils kg/kg content in. 2 Misc. Items: CIF Value Limited to 5% of FOB Value Die Steel HSS Cutting Tools, Coated abrasive cloth belts, brushes & wheels, Non-woven cloth pads, wheels & brushes (both impregnated & non - impregnated), Sisal Fibre & Sisal Buffs & Bonded Emery Grinding Wheels 1 Kg 1 Stainless Steel Coils AISI 304 Gr. 0.4 mm to 1 mm Thickness 2 Getter Pills Net to net 3 Polypropylene/Polyethylene Granules/Moulding Powder 1.45 Kg/Kg Content in Export 1.05 Kg/Kg content in export 4 Nylon Belt Net to net 5 Relevant packing materials 1.05 Kg/Kg content in export 6 Silicon Rubber Net to Net

160 C835 C836 C837 C838 C839 Stainless Steel Watch Straps Stainless Steel Water Filter of various capacities with/without candles (a) Stainless Steel Welded and Cold Drawn Tubes and Pipes (b) Stainless steel welded Corrugated Hose Pipes Deleted Stainless steel wire rope (from wire rod) 7 Rubber Band (Natural Rubber) Net to Net 8 Relevant Screw & Nut Net to Net 9 Vaccum powder 1.05 Kg/Kg content in export 1.0 Kg 1 Stainless Steel Coils 1.20 Kgs 1 No. 1 Stainless Steel Sheets/Coils of relevant grade 1 MT 1 For export item (a) Stainless Steel Wide Coils/Strips of relevant grade for export item (b) Stainless Steel Wide Coils/Strips of relevant grade C kg/kg content of stainless steel in the MT 1.25 MT 1.0 Kg 1 Stainless Steel Rod 1.07 Kg 2 Dry Drawing Lubricant/ coating.009 Kg 3 Wire Drawing Soap.008 Kg 4 Tungsten Carbide Dies.001 No 5 Wet Drawing Lubricant/ Coating.004 Kg 6 Diamond Dies/ Compax dies.004 No Note:- Import of Items at Sl.No. 5 & 6 shall be allowed only against export of thinner stainless steel wire Ropes of size below 1 mm. C840 Stapler 1 kg 1 Cold Rolled Steel Strips/Sheets 1.65 Kg 2 Spring 0.01 kg C841 C842 C843 C844 C845 Deleted Steel Clamp (Galvanised) Steel Clamp (Ungalvanised) Steel/ Cops/ Pirn/ Bobbin Steel Fire Resisting Filing cabinets fitted with combination locks (consisting of locks, Dail 1 kg. 1 Hot Rolled MS Sheet/ Strips/ Wide Coils 1.05Kg/Kg content in. 2 Non Alloy Steel Round/Billet 1.10Kg/Kg content in. 3 Zinc 0.04Kg. 1 Kg 1 Hot Rolled Mild Steel/Stainless Steel Sheet/ Strips/ Coils 2 Non-Alloy Steel /Stainless Steel Round/billet 1.05 Kg/Kg content of relevant steel in Kg/Kg content of relevant steel in. 1 Kg 1 Carbon Steel Tubes/Pipes 1.05 kg/kg content of Steel Tube / Pipes in 2 ABS Granules / Resin 1.05 kg/kg content of ABS in the export product 3 CRCA Steel Sheet/Strips. 1.15Kg/Kg contentof Steel Sheet in the. 360 Nos 1 Combination Locks (consisting net to net of Locks, Dail and Dial Rings)

161 C846 C847 and Dial Rings) Steel flexible Tubes/ Pipes 1 kg 1 Low carbon H.R. Defective kg in sizes ranging from 1/2" sheets/ coils to 3" (Galvanised) 2 Zinc 0.04 kg Steel folding Bed Nickel plated/ Painted C848 Steel Gate Corner - Galvanised 1 MT 1 CR Steel strips/ coils seconds/ 776 kg defectives 2 MS Wire/Wire rods 175 kg 3 Spring Steel 87.5 kg 4 Nickel (for Nickel plated item) kg 4 Epoxy/ Polyester Paints (For 7.98 kg painted items) 1 MT 1 HR Coils/Sheets 1.05 MT/MT content in export. 2 Zinc 4% of Net weight of steel gal- vanised. C849 Steel Hinges - Bar Type 1 kg 1 MS/Non-Alloy Steel Rounds/ 1.24 kgs Bars/Wire Rods C850 Steel J. Belt - Galvanised 1 MT 1 Non-Alloy Steel Rounds 1.05 MT/MT content in export. 2 Zinc 4% of Net weight of steel gal- vanised. C851 Steel pegs 1 No. 1 MS Sheet kg/kg content in. 2 MS Wire rod 1.10 kg/kg content in. 3 MS Round kg/kg content in. 4 Zinc for plating 1% of the net export weight to be plated C852 Steel Safes fitted with combination locks (consisting of Locks, Dail and Dial Ring) 150 Nos 1 Combination locks (consisting Locks, Dail and Dial Rings) C853 Steel Screw 1 kg 1 MS Wire Rod M.S.Wire C854 Steel Truss Tightner - Galvanised C855 C856 C857 Steel Weld Mesh Steel Stranded wire Surgical Blades made of High Carbon Steel (Carbon 0.6% and above by wieght) C161 net to net 1.12 kg 1.08Kg. 1 MT 1 HR Coils/Sheets 1.05 MT/MT content in export. 2 Zinc 4% of Net weight of steel gal- vanised. 1 kg 1 M.S. Wire 1.02 kg/kg content in. 2 Zinc 4% of weight of Steel to be galvanised. 1 kg 1 a) MS Wire Rod 1.05 kg. 1 b) Steel Wire of Relevant Grade and 1.02 kg. dia 1 MT 1 Cold Rolled High Carbon Steel 2.4 MT strips unhardened and untempered (carbon 0.6% and above by weight) C858 Surgical Blades made of 1 MT 1 Cold Rolled Bright Finish Surgical Stainless Steel Strips or 2.75 MT

162 C859 C860 C861 C862 C863 C864 C865 C866 C867 Stainless Steel Suture Needles Table Pencil Sharpener TEE Hinges (Painted/Zinc Plated) Tension Band relevant grade 1 Kg 1 Stainless steel wire (Surgical Needle wire) AIS-420 series 2 HSS Twist Drills (Micro Pivot Drills) 1.07 Kg/Kg content in export 5 Nos./kg of Suture Needles 100 Nos. 1 ABS Moulding Powder/Granules 1.05 kg/kg content in 2 Polyacetal Moulding Powder/Granules 1.05 kg/kg content in 3 SAN Moulding Powder/Granules 1.05 kg/kg content in 4 Polycarbonate Granules 1.05 kg/kg content in 5 Relevant Gear Shape Cutter Net to Net 1 kg 1 MS/HR Sheet/Coil/Strip 1.25 kg/kg content in export 2 M S Wire Rod 1.05 kg/kg content in export 3 Zinc Paint 1 kg. 1 Hot Rolled MS Sheet/ Strips/ Coils 2 Zinc kg 0.01 kg/kg weight of Hinges to be Plated 0.15 kg/kg weight of Hinges to be Painted kg Tiller Left Hand or Right 1 kg 1 MS Plate 1.11 kg Hand Tips for Ball Pen Refills 10 Lakh 1 Brass Scrap Kg/Kg content of relevant materials of Nos. in export Balls. 2 Stainless Steel Balls/Ceramic Nos Balls/ Tungsten Carbide Balls Deleted Tower Bolts Tower Crane Type E1/13B 1 No. 1 CRCA Sheets Second/Prime Grade 1.10 kg/kg net content in export product 2 Low Carbon Wire Rod 1.05 kg/kg net content in export product. 3 Protective Paint or Zinc for coating 1 No. Components/Parts related to the : 1 Electric Supply 160 A 1 No 2 Electric Panel (control Panel) 1 No 3 Complete Cab 1 No 4 Complete Slewing mechanism 1 No 5 4T Safety Device 1 No 6 Complete Hoist Winch 1 No 7 Trolley Winch 1 No 8 Complete Travelling 1 No 9 Electrical Extension (Either 15M, 30 M, or 50 M) 2% of the weight of 1 No C162

163 C868 C869 C870 Tower Crane Type F25/26C similar to FO/23B Track Wheel Transducer 10 Hydraulic Unit with seperate Hyd. Oil 60 Ltrs C163 1 No 11 Hydraulic Jack (Cylinder) 1 No 12 Cable Winder 1 No 13 Wire Rope 7.5 mm 150 Mtrs 14 Wire Rope 10 mm 250 Mtrs 15 Fish Plates 4 Nos 16 Fish Plates Bolts Net to Net 1 No. Components/Parts related to the : 1 Electric Supply 160 A 1 No 2 Complete Hoist winch 1 No 3 Trolley Winch 1 No 4 Complete Cab 1 No 5 10T Safety Device 1 No 6 Electric Cable Set 1 No 7 Complete Slewing Mechanism 1 No 8 Complete Travelling 1 No 9 Hydraulic Unit with separate Hyd. Oil 60 Ltrs 1 No 10 Hydraulic Jack (Cylinder) 1 No 11 Cable Winder 1 No 12 Electric Extension (either 15 M, 30M or 50M) 1 No 13 fish Plates 200 Nos 14 Wire Rope 7.5 mm 150 Mtrs 15 Wire rope 14 mm. 745 Mtrs. 1 kg. 1 Mild Steel HR Sheets/ Strips/ kg Coils 2 Mild Steel Rounds kg 3 Zinc kg 1 No. 1 Spacer Net to Net 2 Springs Net to Net 3 Stem Net to Net 4 Retaining Ring Net to Net 5 Nut Net to Net 6 Copper Tube Net to Net 7 Tube Net to Net 8 Screw Net to Net 9 Clip Net to Net 10 Push Button Net to Net 11 Bellows Net to Net 12 Diaphragm Net to Net 13 Wire Net to Net 14 Stud Net to Net

164 C871 C872 C873 Tubular Poles/ Accessories i.e. Cross Arms, Tussing Tackle, Stay Set, Flag Arm, Anchor Bolt, Holder, Arrestors Turn Buckle Single/Twin type shaving system Disposable Razor Blades (single/double/triple blades)with/without Lubra exported either with fixed handle or handle and magazine separately in different types of packings 15 SS Hex Bars 0.07 Feet 16 Rod 0.46 Feet 17 Coil Feet 18 CRCS Strip Lbs. 19 SS Strip Lbs. 20 SS Sheet Lbs. 1 MT 1 ERW MS/Carbon Steel Pipes/Tubes 1 MS/Carbon Steel HR Steels/ Coils/ Prime/ Seconds/ Defectives 2 MS/ Carbon Steel/ ENTA Round/ Rods and Bars C MT/MT content in export 1.1 MT/MT content in export 1.1 MT/MT content in export 3 Welding Rods Upto 2% of FOB Value 1 kg. 1 Hot Rolled MS Sheet/ Strips/ Coils kg 2 Zinc kg 1 Nos 1 Cold Rolled Stainless Steel Strips 1.75 kgs/kg content in 2 ABS/Styrene Butadiene Co- Polymer Q-Resin (for handle, seat, top cap and spacer 1 & 2) 3 High impact/ GP Polystyrene (for Protective Cap/Magazine) 4 Polyox Coagulant 5 Polyox of relevant grade 6 GP Polystrene 7 Polyterafluoroethylene 8 Grinding Wheel 9 Slitting Wheel 10 Krytox / Dry Film 11 Aluminium Strips/Coil/Sheet (for spacer/clamps) 1.10 kgs/kg content in 1.10 kgs/kg content in 1.06 kg/kg content of 12 T.P Elastomer for Sleeve 1.10 kg/kg content of 13 High impact Polystyrene (for Top Cap seat & handle) 14 Brass Strips/ Zinc Mazak (for razor head and razor handle rib) 1.10 kg/kg content of 1.02 kg/kg content of 15 Packing material As per packing policy Note: 1. Wherever handles are sought for import separately, the same be allowed as components on net to net basis with accountability clause and in such cases the rest of the raw materials will have to be accounted for as per the norms above. 2. Import item No. 4,5, and 6 all the three items together 1.30 kg/kg weight of the Lubra strips in the. 3. Import item No. 7,8,9, and 10 (Consumables)&. CIF value taken together may be restricted to 1% of the FOB value. C874 Deleted C875 Deleted

165 C876 C877 C878 C879 C880 C881 C882 C883 C884 C885 C886 C887 C888 C889 C890 Deleted Deleted Deleted Deleted Twin type shaving system Razor/ Razor Handle Type Inner/ Outer Ring Spiral Wound Gaskets U-Bolt U-Clamp/C-Clamp. Universal Bracket Vaccum Flasks of Stainless Steel Casing 1 Million pcs.of Razor handles 1 High Impact Polystyrene (for Razor Handle) C kg 2 Zinc Mazak/ Brass Strips (for kg Razor rib) 3 Brass Strip (for Razor Head) 2400 kg 1.0 MT 1 Stainless Steel Strips 1.10 MT/MT content in export 1 kg. 1 MS Round kg 2 Zinc kg 3 Nuts Net to net. 1 kg. 1 MS Round kg 2 Zinc kg 1 kg. 1 Mild Steel HR Sheets/ Strips/ kg Coils 2 Mild Steel Rounds kg 1 No. (1000 ml) 3 Zinc kg 1 Polypropylene 1.05 kg/kg content in 2 Stainless Steel Sheets/Coils 1.05 kg/kg content in 3 Chemicals for Glass Shell: a) Borax 80 gms. b) Selenium 2 gms. c) Arsenic 2 gms. d) Soda Ash 100 gms e) Sodium Silico Fluoride 25 gms. f) Silver Nitrate 1.5 gm g) Caustic Soda 25 gms. h) Silicon Oil 0.5 gm. Valve for LPG Cylinder, Hand wheel type, made of Brass 1 kg 1 Brass Scrap 1.12 kg Vertical Arm 1 kg. 1 Hot Rolled MS Sheet/ Strips/ kg Coils 2 Zinc kg Stainless Steel Washers of different grades. Deleted Watch Dials made out of Nickel Silver Brass Strip 1 kg 1 Stainless Steel Coils/Sheet/Sheet Cuttings/Strips - both prime and seconds of relevant grade Nos 1 Nickel Silver Brass Strip 1 a) i ) Semi-finished Watch Dials (Pre-punched blanks made out of 1.65Kgs kg/kg content in Net to Net

166 Brass / Nickle Silver with special base finish-gents, Boys and Ladies 1 a) ii ) Semi-finished Watch Dials Net to Net (Pre-punched blanks made out of Brass / Nickle Silver with mother of pearl- (MOP Discs)Gents, Boys and Ladies 1 a) iii ) Semi-finished Watch Dials Net to Net (Brass/Nickle Silver Strips) containing semi - punched brass circles Gents, Boys and Ladies 2 Dial Feet 2280 Nos. 3 Appliques 3 (a)(i)special Appliques (prepunched mother of pearl - (MOP Discs) - made out of natural seashell - Gents, Boys and Ladies 3 (a)(ii)special effects sheets made out of carbon fibre C Nos. Net to net. 4 Lacquers 600 gms. 5 Printing Ink 67 gms. 6 Misc. Items: Grinding wheel/abrasive/polipla Abrasive/Electroplating Salt & Surface Treatment Chemicals/Nickel Sulphite/Silver Brightener/Ad Salt/Twist Drills & Cutting Tools & Cleaning Brushes. 1.3 Sq.mtr./ Sq.mtr. content in export product. Upto 5% of FOB value of exports. C891 Water meters 1 kg 1 Brass Scrap kg C892 Wear Sleeves made out of 1 MT 1 EDDG Bright Mild Steel 1.30 MT Bright Mild Sheet. C893 Welded Steel Pipe 1 MT 1 Relevant Alloy/Non-Alloy Steel 1.30 MT Fittings made from Steel Plates/Sheets Plates/Sheets C894 Deleted C895 Window Stay (made of Steel Sheet) 1 MT 1 H.R.Non Alloy Steel Sheet/Coils/Strips MT C896 Steel Wire Nails 1 kg 1 M.S. Wire 1.05 kg C897 Wood screws made of steel, self colour or plated 1 kg 1 Carbon steel wire rod kg C898 Wood to steel Adapter 1 kg. 1 Hot Rolled MS Sheet/ Strips/ kg Coils 2 Zinc kg C899 C900 Y-Arm made of Steel. Zinc Plated (Galvanised) Beam Clam 3/8" to 1/4" 1 kg. 1 Hot Rolled MS Sheet/ Strips/ kg Coils 2 Zinc kg 1 MT Connectors 1 H.R. Coil/Sheet 2 mm to 3.15 mm 1.35 MT

167 C901 C902 Zinc plated (Galvanised) conduit Hanger Zinc Plated (Galvanised) Metallic Connectors (Regular "C" Type & Insu- lated) Size 1/4" to 4" without Screw. 2 Zinc MT 1 kg 1 HR Coil/ Sheet 1 MM to 2 MM thick 1No. 1 ERW Steel Tube OD mm to mm HR Steel (Non- alloy) Coil/ Sheet 1.6 mm to 5 mm kg 1.26 MT/MT content in MT/MT/Kg content in the export product. C903 C904 C905 C906 C907 Zinc Plated (Galvanised) Romex Connectors 1/2" to 1-1/2" Zinc Plated (Galvanised Steel Locknuts (Blanked/ Punched) Size: a)1/2" to 4" Regular 1/2" to 2" UL/CSA b)5" and 6" Regular and 2-1/2" to 6" UL/CSA c)1/2" to 1" Extruded type Aluminium Oxide Resin Disc (Coated Abrasive): 4" Dia x 5/8" Centre Hole (containing Al. Oxide grains Min. 1.1 kg) Aluminium Oxide Resin Disc (Coated Abrasive) 5" Dia x 5/8" Centre Hole (containing Al. Oxide grains Min. 1.4 kg.) Oxide Resin Disc (Coated Abrasive Aluminium) 6" Dia x 7/8" Centre Hole (containing Al. Oxide grains Min kg.) 1 MT Connectors without Screw 2 Zinc 0.8% of the weight of. 3 Machine Screws Net to Net Bolt Net to Net 1 C.R. Coil/Sheet 1 mm to 2 mm 1.75 MT 2 Zinc MT 1 MT 1 For export item ( A) (I) H.R. Coil/Sheet 2 mm to 5 mm (II) Zinc (III) Alloy Steel Bars of AISI D- 3 AISI M-2 & equivalent Dia upto 350mm. 2 For export item ( B) (I) MS Plate 10mmto 16mm (II) Zinc (III) Alloy Steel Bars of AISI D- 3 or AISI M-2 & equivalent Dia upto 350mm. 3 For Export item ( C) (I) CR Coil/sheet 1mm to 2mm (II) Zinc (III) Alloy Steel Bars of AISI D- 3 AISI M-2 & equivalent Dia upto 350mm MT 0.008MT CIF value resctricted to 2% of the FOB value of the export., MT 0.008MT CIF value resctricted to 2% of the FOB value of the export., 3.40 MT 0.008MT CIF value resctricted to 2% of the FOB value of the export., 100 Nos. 1 Abrasive Grade Vulcanised Fibre kg (quantity to be accounted for in ) 2 Aluminium Oxide grains (Synthetics) 1.21 kg 100 Nos. 1 Abrasive Grade Vulcanised Fibre kg. (quantity to be accounted for in ) 2 Aluminium Oxide grains (Synthetics) 1.54 kg 100 Nos. 1 Abrasive Grade Vulcanised Fibre kg (quantity to be accounted for in ) 2 Aluminium Oxide grains kg (Synthetics) C167

168 C908 C909 C910 C911 Oxide Resin Disc (Coated Abrasive Aluminium) 7" Dia x 7/8" Centre Hole (containing Al. Oxide grains Min. 3.2 kg) Ball/ Roller Thrust/ clutch release/ spherical plain Bearing having height more than 1" but not exceeding 2" Ball/ Roller Thrust/ clutch release/ spherical plain Bearing having height more than 2" but not exceeding 5" Ball/Roller Thrust/ clutch release/ spherical plain Bearing having height 0-1" C912 Bench Grinder 6" C913 C914 C915 C916 C917 Brazed Carbide Tools Brazed Tools Carbide Tips Cold Rolled Non Alloy/Alloy Steel Hardened and Tempered Saw Blades/Handsaw Blades Pneumatic tool Cutting Tools - Single point of High Speed Steel 100 Nos. 1 Abrasive Grade Vulcanised Fibre kg. (quantity to be accounted for in ) 2 Aluminium Oxide grains 3.52 kg (Synthetics) 1000 Nos 1 Ball bearing grade steel 2300 kgs tubes/bars/un-machined Forged Rings of SAE 52100/ DIN 100 Cr M07 or equivalent grade 2 Steel balls of SAE or Nos equivalent grade 3 Brass Scrap 194 kgs 4 Misc. Items: Super precision fibre cage bearing, grinding spindle and grinding wheel 1000 Nos 1 Ball bearing grade steel tubes/bars/un-machined forged Rings of SAE 52100/ DIN 100 Cr M07 or equivalent grade 2 Steel balls of SAE or equivalent C168 upto 5% of FOB Value 3340 kg Nos 3 Brass Scrap 2000 Kg 4 Misc. Items: Super precision fibre cage bearing, grinding spindle and grinding wheel 1000 Nos 1 Ball bearing grade steel 230 kgs tubes/bars/un-machined Forged Rings of SAE 52100/ DIN 100 Cr M07 or equivalent grade 2 Steel Balls of SAE or equivalent grade 3 Super precision fibre Cage bearing, grinding spindle and grinding wheels 1 kg pig iron 1 Pig Iron 1.10 kg content upto 5% of FOB value Nos 2 MS Round 1.17 kg upto 5% of FOB Value 100 Nos 1 Tungstons Carbide Tips/Inserts 102 Nos. 2 Brazing Foil Kg 1000 No 1 Tungsten Carbide Tips & inserts in various shapes & sizes 2 Carbon steel bars/ Rounds/Squares/ Flats net to net 3 Brazing Foil 0.29 kg 1 MT 1 Hot Rolled Alloy/Non Alloy Steel Strips/Wide Coils of relevant grade 1.1 kg/kg of wt of steel in export 1.20 MT 1 No 1 Cylinders 1 No. 2 VC Washer 1 No. 3 Latch Bushing 1 No. 1 kg 1 High Speed Steel (Cobalt Grade) 1.05 kg

169 C918 C919 C920 C921 C922 C923 (Cobalt Grade) Cutting tools - Single point of High Speed Steel (Non-cobalt Grade) Deleted Cutting Tools - Multiple point of high Speed Steel (Non-cobalt Grade)/Tool Steel Cutting Tools - multiple point of High Speed steel 1 kg 1 Non-cobalt bearing high speed steel (AISI M2 grade of High Speed Steel) C kg 1 kg 1 High speed steel/ (non-cobalt grade)/ Tool Steel 1.33 kg 2 Milling Cutter for a cif value upto 2% of the fob value of. 1 kg 1 High Speed Steel (Non -Cobalt 1.33 kg Grade)/Tool Steel (Cobalt Grade)/Tool Steel 2 Milling Cutter for a cif value upto 2% of the fob value of. Electric Discharge Machine(EDM) Wire Endless Coated Abrasive Belts/ Aloxide Cloth Belts/Silicarb Cloth Belt/ Zirkon Cloth Belt Grit Ranges MT 1 Copper Wire Bar/ Cathode 1.10 MT/MT content in. 2 High Grade Zinc Ingot 1.10 MT/MT content in. 3 ABS - Styrene Group Upto 2% of the FOB value of export. 4 Expanded Polyesterin Upto 2% of the FOB value of export. 100 Sq. mtr. 1 Drill Cloth made of Cotton 111 Sq.mtr. (106.5 kgs +/- 2%) 2 Aloxide Grain kgs Silicarb Grain kgs Zirkon Grain kgs 3 Phenol kgs 4 Formaldehyde(37%) kgs 5 Belt Jointing material consisting of PU Resin, Hardener, Splicing Tape This norm shall also be applicable to exports made in "Cloth Roll" form. C924 Endless Coated Aloxide Cloth Belts/Silicarb Cloth Belt/ Zirkon Cloth Belt Grit Ranges Sq. mtr. (245 kgs +/- 2%) Upto 3% of FOB value of export. 1 Drill Cloth made of Cotton 111 Sq.mtr. 2 Aloxide Grain Silicarb Grain Zirkon Grain kgs kgs kgs 3 Phenol kgs 4 Formaldehyde(37%) kgs 5 Belt Jointing material consisting of PU Resin, Hardener, Splicing Tape This norm shall also be applicable to exports made in "Cloth Roll" form. C925 Endless Coated Aloxide Cloth Belts/Silicarb Cloth 100 Sq. mtr. (230 kgs +/- 2%) Upto 3% of FOB value of export. 1 Drill Cloth made of Cotton 111 Sq.mtr.

170 Belt/ Zirkon Cloth Belt Grit Ranges Aloxide Grain Silicarb Grain Zirkon Grain kgs kgs kgs 3 Phenol kgs 4 Formaldehyde(37%) kgs 5 Belt Jointing material consisting of PU Resin, Hardener, Splicing Tape This norm shall also be applicable to exports made in "Cloth Roll" form. C926 Endless Coated Aloxide Cloth Belts/Silicarb Cloth Belt/ Zirkon Cloth Belt Grit Ranges Sq. mtr. (152 kgs +/- 2%) C170 Upto 3% of FOB value of export. 1 Drill Cloth made of Cotton 111 Sq.mtr. 2 Aloxide Grain Silicarb Grain Zirkon Grain kgs kgs kgs 3 Phenol kgs 4 Formaldehyde(37%) kgs 5 Belt Jointing material consisting of PU Resin, Hardener, Splicing Tape This norm shall also be applicable to exports made in "Cloth Roll" form. C927 C928 C929 C930 C931 Endless Coated Aloxide Cloth Belts/Silicarb Cloth Belt/ Zirkon Cloth Belt Grit Ranges 240 and above Fix Perfect Inserts for Milling and Turning Gear cutting tools of cobalt bearing high speed steel High speed steel square, Rectangular and Round Cobalt & Non-Cobalt Grade Tool Bits of Cross Sectional Area more than 150 Sq.mm. Industrial Diamond Prod. Diamond Grinding Wheels/ diamond file and 100 Sq. mtr (89 kgs +/- 2%) Upto 3% of FOB value of export. 1 Drill Cloth made of Cotton 111 Sq.mtr. 2 Aloxide Grain Silicarb Grain Zirkon Grain kgs kgs kgs 3 Phenol kgs 4 Formaldehyde(37%) kgs 5 Belt Jointing material consisting of PU Resin, Hardener, Splicing Tape Upto 3% of FOB value of export. 1 kg 1 Tungsten Carbide Powder 1.20 kg/kg of Tungsten Carbide Powder content in 1 kg 1 High speed steel having cobalt 1.80 kg content less than 10% 1 MT 1 High Speed Steel Cobalt Bearings & non-cobalt Bearings Square, Rectangular & Round Bars 1.15 MT 1 Industrial Diamond Powder Net to net( upto the maximum of 20% of fob value)

171 C932 C933 tools Industrial Diamond Prod. Diamond Tools/ Diamond dressers/ Diamond tools bits Industrial Diamond/CBN Grinding Wheels 1.00 ct. 1 Industrial Diamond ct 1 Kg 1 Synthetic Industrial diamond powder or Borazone CBN Abrasive. 2 Resin bonding mixture 3 Matrix powder Note : 1.DIAMOND IMPREGNATED SEGMENTS: %age of raw material requirement on net weight of product Resultant. 2. Import item Nos. 1,2 and 3&... CIF value of three items taken together restricted to 35% of FOB value. C934 C935 C936 C937 C938 C939 C940 ISO Indexable Inserts For Turning, Milling and Drilling NC/CNC Wire Cut Electric Discharge Machine Organic Grinding Wheels: All other wheels Grain Bond Ratio 75:25 Organic Grinding Wheels: Depressed Centre Wheels Grain Bond Ratio 75:25 Organic Grinding Wheels: Hot Press Wheels for Billet Grinding Grain Bond Ratio 75:25 Organic Grinding Wheels: Non-Reinforced Cutting off wheels Grain Bond Ratio 75:25 Organic Grinding Wheels: Nut Inserted wheels Grain Bond Ratio 88:12 1 kg 1 Tungsten Carbide Powder/ Tungsten Carbide Mixed Powder C kg/kg of Tungsten Carbide Powder content in the. 1 No. 1 Ball Screw Support Bearings Net to Net 2 Stepper Servo DC Motors/DC Net to Net Motors 4 Limit Switch Net to Net 5 Electro Magnetic Clutch Net to Net 6 High Pressure Pump Net to Net 7 LM Guides Net to Net 8 Ball Screws Net to Net 9 Crossed Roller Guides Net to Net 10 Mosfets Net to Net 11 LED Displays Net to Net 12 Integrated Circuits Net to Net 13 Potentiometers Net to Net 1 kg 1 Synthetic Aluminium Oxide/Silicon Carbide,Resin 1 kg 1 Synthetic Aluminium Oxide/Silicon Carbide, Resin 1.15 kg/kg content in export 1.08 kg/kg content in export. 2 Glass Fibre Disc 3.15 Nos./depressed centre wheel export 1 kg 1 Synthetic Aluminium Oxide/Resin, Iron Pyrite, Chopped Glass Strands 1 kg 1 Synthetic Aluminium Oxide/Silicon Carbide, Resin 1 kg 1 Synthetic Aluminium Oxide/Silicon Carbide, Resin 1.15 kg/kg content in export 1.08 kg/kg content in export 1.15 kg/kg content in export

172 C941 C942 C943 C944 C945 C946 C947 C948 C949 C950 C951 C952 C953 Organic Grinding Wheels: Point & Fluting Grain Bond Ratio 65:35 Organic Grinding Wheels: Razor Blade Grinding wheel Grain Bond Ratio 85:15 Organic Grinding Wheels: Reinforced Cutting off wheel Grain Bond Ratio 75:25 Organic Grinding Wheels: Snagging wheels Grain Bond Ratio 75:25 PCB Drills made from Solid Tungsten Carbide Blanks/ Rods of Diameter 1.51 mm to 6.50 mm PCB Router made from Solid Tung- sten Carbide Blanks Permanent Magnetic Chuck Plastic Injection/Extrusion Mould/Dies/Cavities/Pun ches/housing/inserts made of Alloy Steel/Tool Steel Pneumatic Revetting hammer Resin bonded diamond wheels (Quantity of diamond powder contained in export Product should be mentioned) Saws/ Segments made from high speed steel strips/ sheets including Bimetal & Flexible Screw Drivers (Nickel plated) Slitting cutters made of steel variety-x 1 kg 1 Synthetic Aluminium Oxide/Iron Pyrites 1.15 kg/kg content in export 1 kg 1 Silicon Carbide, Resin 1.15 kg/kg content in export 1 kg 1 Synthetic Aluminium Oxide/Silicon Carbide, Resin 1.08 kg/kg content in export 2 Glass Fibre Disc 2.10 Nos./re-inforced cutting of wheel export 1 kg 1 Synthetic Aluminium Oxide/Silicon Carbide, Resin 1000 Nos. 1 Solid Tungsten Carbide Blanks 1000 Nos. 2 Relevant Consumables: (Fluit Grinding Diamond Wheels) 1 No. 1 Solid Tungsten Carbide Blanks Dia 3.25+/-0.25x length 38.3+/- 0.5mm 2 Diamond Grinding Wheels Dia 150mm (Consumables) 1 No. 1 Permanent Magnet Strontium Ferrite Grade 1 kg 1 Relevant Alloy Steel/Tool Bars/Rods/Flats/Rounds/Plates 1.08 kg/kg content in export Upto 5% of FOB Value Nos. 1 No. per 1350 Nos. of kg/kg content in export kg 1 No 1 Cylinders of reqd specification 1 No. 1 kg 1 Industrial Diamond Powder Net to Net 1 kg 1 High speed steel and Bimetal strips/sheets 2 MISC. ITEMS:- Millingcutters, Settingwheels/Setting Hammers, Paints, Powder for Powder Coating, Dies & Punches, Cleaning Oil Berkatekt (Chemical), Tools & Dies kg CIF Value restricted to 2% of FOB value. 1 kg 1 Non-Alloy Steel rounds 1.10 kg/kg content in. 2 Nickel kg/ kg of steel in 1 kg 1 Steel of variety-x 2.15 kg C172

173 C954 C955 C956 C957 C958 C959 C960 Vetrified Grinding wheels : Mounted Points Grin Bond Ratio 85:15 Vetrified Grinding Wheels: All other Vetrified Grinding Wheels Grain Bond Ratio 85:15 Vetrified Grinding Wheels: Ball Wheels Grain Bond Ratio 60:40 Vetrified Grinding Wheels: Floor Polishing Blocks, Rubbing Bricks, Finishing Stone, Segments Grain Bond Ratio 85:15 Vetrified Grinding Wheels: Honing Stone/Super Finishing Stones Grain Bond Ratio 85:15 Welded Construction tools made of High speed steel in combination with other steels namely Twist drills/ Reamers/ Threading tools/ End mills/ Milling cutters/ Taps Above 95 CC and upto 175 CC 4 Stroke Motorcycle in CKD/SKD/CBU Condition. 1 kg 1 Synthetic Aluminium Oxide/Silicon Carbide 1 kg 1 Synthetic Aluminium Oxide/Silicon Carbide 1 kg 1 Silicon Carbide Grain kg 2 Synthetic Aluminium Oxide Grain 1 kg 1 Synthetic Aluminium Oxide/Silicon Carbide 1 kg 1 Synthetic Aluminium Oxide/Silicon Carbide 1 kg 1 High speed steel (non-cobalt grade) C kg/kg content in export kg/kg content in export kg 1.08 kg/kg content in export kg/kg content in export kg 1 High speed steel (Cobalt grade) 1.25 kg 1 No. 1 Cold Rolled Steel Sheets/Strips/Coils in Thickness Between 0.5 mm to 3.0mm kg 2 Cold Rolled Coated Steel 5.03 kg Sheets/Strips/Coils in Thickness Between 0.8 mm to 1.0 mm 3 Hot Rolled Steel kg Sheets/Strips/Coils in Thickness Between 3.0 mm to 5.0 mm 4 Commercial Grade Aluminium kg Purity min 99% 5 Silicon kg 6 Copper Cathode/Wire Bars/Rods kg 7 Natural Rubber kg 8 Nickel Kg 9 Polyol gms 10 Isocynate gms 11 Butyl Rubber gms 12 Relevant Synthetic Rubber gms (NBR/SBR) 13 Carbon Black gms 14 Polyvinyl Chloride (PVC) gms

174 C174 Granules 15 Polypropylene Granules gms 16 High Density Polyethelene Granules gms 17 Rexine 0.67 Sq.Mtr. 18 Paints 3.40 Ltrs. 19 Air Filter Net to net. 20 Auto Light Set Net to net. 21 Battery Net to net. 22 Bearing Race Set Net to net. 23 Bearing Set Net to net. 24 Boss Net to net. 25 Brake Cam Set Net to net. 26 Bushing Set Net to net. 27 Camshaft Valve Net to net. 28 Carbuiretor Assembly Net to net. 29 Catalytic Converter Net to net. 30 Chain and Sprocke Set Net to net. 31 Change Drum Assembly Net to net. 32 Charging Regulator Assembly Net to net. 33 Clutch Asly Components Net to net. 34 Control Cable Set Net to net. 35 Conyto Lever and Housing Set Net to net. 36 Crankshaft Assembly Net to net. 37 Cylinder Liner Net to net. 38 Decal Set Net to net. 39 Disc Brake Component Net to net. 40 Filter Net to net. 41 Fork Shift Set Net to net. 42 Front Fork Net to net. 43 Front Hub Axle Net to net. 44 Fuel Tap Assmbly Net to net. 45 Gear Balancer Wt. Net to net. 46 Gear Set Net to net. 47 Guide Chain/Stopper Net to net. 48 Guide Valve Net to net. 49 Hardwares Net to net. 50 Harness Net to net. 51 Horn Net to net. 52 Housing Assembly Control Net to net. 53 Ignition Coil Net to net. 54 Ignitor Net to net. 55 Kick Lever Assembly Net to net.

175 56 Kick Shaft Assembly Net to net. 57 Lock/Key Set Net to net. 58 Magneto Net to net. 59 Needle Roller Bearing Set Net to net. 60 Nipple Spoke (1 Set =72 Nos.) Net to net. 61 Oil Pump Assembly Net to net. 62 Oil Seal Net to net. 63 Piston Asly (Piston, Rings, Pin) Net to net. 64 Push Rod Net to net. 65 Rear Hub Axle Net to net. 66 Rear Shock Absorber (1 Set = 2 Nos.) 67 Rear View Mirror Set (1 Set of 2 Nos.) C175 Net to net. Net to net. 68 Regulator Voltage Assembly Net to net. 69 Relay Net to net. 70 Retainer Net to net. 71 Retainer Valve Spring Net to net. 72 Rocker Arm Net to Net 73 Scr, Diodes and other Electronics Components Net to Net 74 Screw Net to net. 75 Shaft Transmission Input Net to net. 76 Shaft Transmission Output Net to net. 77 Shift Rod Net to net. 78 Spark Plug Net to net. 79 Speedometer Assembly Net to net. 80 Spoke (1 Set = 36 Nos.) Net to net. 81 Spring Engine Valve Net to net. 82 Starter Clutch Components Net to net. 83 Starter Motor Net to net. 84 Steel Frame Net to net. 85 Suppressor Cap Net to net. 86 Tank Cap Assembly Net to net. 87 Tyres Set Net to net. 88 Valve Intake & Exhaust Net to net. 89 Valve Seat (1 Set = 2 Nos.) Net to net. 90 Hot Dies Steel Blocks, High Speed Steel, Inserts, Cutting Tools, Grinding Stones, Adhesives and Sealants, Steel shots Upto 5% of FOB Value of export Note : The item of import and its specification should conform/match with. C961 Above 175 CC and upto 1 No. 1 CRCA Defective kgs 250 CC Motorcycles in Sheets/Coils/Strips 2 M.S./Carbon Steel Seamless Pipe kgs

176 CBU/ SKD/ CKD condition 3 Natural/Synthetic Rubber(SBR/PBR)including SBR & V.P. Latex 4 Paints(Acrylic) 2 litres 5 PU Foam 2.80 kgs 6 Needle Bearing (dia 4 x 6 mm) 40 Nos 7 Bearing (6304) 3 Nos 8 Bearing (6205) 2 Nos. 9 Bearing (6303) 1 No. 10 Bearing (6302) 4 Nos. 11 Capacitor Discharge Ignition 1 No. (CDI Unit) 12 Generator Assembly 1 No. 13 Spart Plug 1 No. 14 Piston, Piston Ring & Pin 1 No. 15 Flasher 1 No. 16 Tail Light 1 No. 17 Speedometer 1 No. 18 Headlight 1 No. 19 H.T. Coil 1 No. C kgs/100 kgs weight of Tyres & Tubes separately. 20 Cables 20 Meters 21 Reflector 2 Nos. 22 Indicator 4 Nos. 23 Filter 1 No. 24 Lock 2 No. 25 Automobile Bulb 9 Nos. 26 Forged Components one No. each offollowing:- i) Engine Sprocket ii) Fly Wheel iii) Connecting Rod iv) Main Shaft v) Lay Shaft vi) Gear with Hub vii) Kick Start Shaft viii) Kick Start Quadrant ix) Kick Start Lever with Pin x) Kick Start Ratchet xi) Head Lug xii) Steering Lug xiii) Clutch Hub xiv) Bracket 27 Cast Components: one No. each of following:- i) Cylinder Barrel

177 C962 C963 Deleted Above 250 CC and upto 500 CC Motorcycles in CBU/ SKD/ CKD condition ii) C.C. Wheel 28 Electric Horn 1 No. 1 No. 1 CRCA Defective Sheets/ Coils/Strips kgs. 2 MS/Carbon Steel Seamless Pipe kgs. 3 Natural Rubber/Synthetic Rubber (PBR/SBR /1712) including SBR latex and VP latex 4 Paints 2.00 Ltr. 5 PU Foam 2.80 kgs. 53 Kg per 100 Kg weight of tyres and tubes separately 6 Needle Bearing (Dia 4X6) Nos. 7 Bearing (6305) 3.00 No. 8 Bearing (6205) 2.00 No. 9 Bearing (6303) 1.00 No. 10 Bearing (6302) 4.00 No. 11 Capacitor Discharge Ignition 1.00 No. (CDI Unit) 12 Generator Assembly 1.00 No. 13 Spark Plug 1.00 No. 14 Piston, Piston Rings & Pin 1.00 Set. 15 Flasher 1.00 No. 16 Tail Light 1.00 No. 17 Speedometer 1.00 No. 18 Headlight 1.00 No. 19 H.T. Coil 1.00 No. 20 Cables Mtrs. 21 Reflector 2.00 No. 22 Indicator 4.00 No. 23 Filter 1.00 No. 24 Lock 2.00 No. 25 Automobile Bulb 9.00 No. 26 Forged Components Nos. 27 Cast Components kgs. 28 Electric Horn 1.00 No. Note : 1. Import of synthetic rubber shall not exceed 9 Kg out of total quantity of 53 Kg allowed. Out of 9 Kg of synthetic rubber allowed, the import of VP Latex shall not exceed 0.4 Kg. C CC Moped 1 No. 1 Raw Material: a) Alloy Steel Sheet/Strips/Bars kgs. b) CRCA Sheet/Coil Strips kgs. c) HR Coils/Strips kgs. d) Barss Scrap 1.30 kgs. e) Aluminium/Alloy Ingots 5.60 kgs. f) MS Rods/Bars 4.50 kgs. C177

178 C CC to 60 CC Scooter in CKD/SKD/CBU Condition 2 Chemicals: a) Paints 1.00 kg. b) Isocyanate 0.35 kg. c) Polyol 0.35 kg. d) PVC Leather Cloth 0.40 kg. e) Nylon Granules 1.00 kg. f) HDPE Granules 1.00 kg. g) PVC Resin (Paste Grade) 0.5 kg. h) Nickle 1.00 kg. 3 Components: a) Small End Bearing Net to Net b) Clutch Pulley Bearing Net to Net c) Big End Bearing Net to Net d) Spark Plug Net to Net e) High Tensile Nut/Bolt/Screws/Rivets C178 Net to Net f) Piston, Piston Ring and Pin Net to Net g) Tail Light Net to Net h) Flasher/Indicator Net to Net i) Head Light Net to Net j) Reflector Net to Net k) Halogen Bulb Net to Net l) Tyres Net to Net m) Tubes Net to Net 1 No. 1 Cold Rolled Prime Steel Sheets/Strips/Coils 2 Hot Rolled Prime Steel Sheets/Strips/Coils kgs kgs 3 Seamless Steel Tubes Mtr. 4 Aluminium not Alloyed/Aluminium Alloys kgs 5 Silicon kg 6 Copper Cathode/Wire Bar/Rod kg 7 Super Enamelled/Enamelled Copper Wire kg 8 Natural Rubber kg 9 Polyol gms 10 Isocynate gms 11 Butyl Rubber gms 12 Synthetic Rubber (NBR/SBR/ PBR) gms 13 Carbon Black gms 14 Poly Vinyl Chloride (PVC) Granules gms 15 PolyPropylene Granules gms 16 High Density Polyethelene gms

179 Granules 17 ABS Granules gms 18 Nylon Granules gms 19 PVC/Artificial Leather Cloth Sq.Mtr. 20 Paints Ltrs. 21 Regulator Assembly Net to net. 22 Crank Shaft Assembly(without Bearings) Net to net. 23 Tyres(1 Set= 3 Nos.) Net to net. 24 Tool Kit Net to net. 25 Output Shaft Assembly Net to net. 26 Carburettor Net to net. 27 Piston Assembly Net to net. 28 Clutch Assembly Complete Net to net. 29 Driving Sprocket Net to net. 30 Chain Net to net. 31 Pinion Shaft Assembly Net to net. 32 Bearing (SKF 6203) or equivalent 33 Bearing (SKF6203.C3) or equivalent 34 Bearing (SKF 6200) or equivalent 35 Needle Roller Bearing (KZK162212) or 36 Needle Roller Bearing (KBK121516) or equivalent Net to net. Net to net. Net to net. Net to net. Net to net. 37 Helical Gear Net to net. 38 Kick Starter Net to net. 39 Central Bush-brake Drum Net to net. 40 Horn Net to net. 41 Front Hub Pin Net to net. 42 Supressor Cap Net to net. 43 Bush Net to net. 44 High TensionCoil Net to net. 45 Contol Cable Set (1 Set = 4 Nos.) Net to net. 46 Rear View Mirror Set(1 Set=2 Nos.) Net to net. 47 Wiring Harness Net to net. 48 Spark Plug Net to net. 49 Petrol Cock Assembly Net to net. 50 Front Suspension Spring Net to net. 51 Rear Shock Absorber Net to net. 52 Antidive Link Complete Net to net. 53 Auto Lamps Set (Bulbs only) (1 Set = 8 Nos.) Net to net. C179

180 54 Decal (1 Set = 2 Nos.) Net to net. 55 Blinker Set (1 Set = 4 Nos.) (without bulbs) 56 Auto Switch Assembly (1 Set = 2 Nos.) C180 Net to net. Net to net. 57 Throttle Pipe Net to net. 58 Tail Lamp Assembly (without bulbs) Net to net. 59 Spindle Net to net. 60 Ceramic Magnet Net to net. 61 Brake Liner Net to net. 62 Wiring Harness for Stator Net to net. 63 Front Link Net to net. 64 Speedometer Net to net. 65 Steering and Seat Lock & Key Net to net. 66 E.I.S Assembly (without SCR and Diode) 67 SCR and other Electronic Components Net to net. Net to net. 68 Diodes Net to net. 69 Reflector Net to net. 70 Head Lamp Assembly (without bulbs) Net to net. 71 Cylinder Block Net to net. 72 Solid State AC Flasher Assembly Net to net. 73 Hot Die Steel Blocks 74 High Speed Steel 75 Inserts 76 Cutting Tools 77 Grinding Stone 78 Adhesives and Sealants 79 Steel Shots Note 1. The Item of import and its specification should conform/match with. 2. Import items mentioned at Sl. No. 73 to 79 are allowed upto 5% of FOB value of exports. C966 Above 60 CC and upto 100 CC Scooter in CKD/SKD/CBU Condition. 1 No. 1 Cold Rolled Prime Steel Sheets/Strips/Coils 2 Hot Rolled Prime Steel Sheets/Coils kgs 2.00 kgs 3 Seamless Steel Tubes Mtr. 4 Aluminium not Alloyed/Aluminium Alloys 6.38 kgs 5 Silicon kg 6 Copper kg 7 Super Enamelled/Enamelled Copper Wire kg 8 Natural Rubber 0.22 kg 9 Polyol gms 10 Isocynate gms

181 11 Butyl Rubber gms 12 Synthetic Rubber (NBR/SBR/PBR) gms 13 Carbon Black gms 14 Poly Vinyl Chloride (PVC) Granules gms 15 Poly Propylene Granules gms 16 High Density Polyethelene gms 17 ABS Granules gms 18 Nylon Granules gms 19 PVC/Artificial leather Cloth Sq.Mtr. 20 Paints Ltrs. 21 Regulator Assembly Net to net. 22 Crank Shaft Assembly(without Bearings) Net to net. 23 Tyres (1 Set= 3 Nos.) Net to net. 24 Tool Kit Net to net. 25 Output Shaft Assembly Net to net. 26 Carburator Assembly Net to net. 27 Piston Assembly Net to net. 28 Clutch Assembly Complete Net to net. 29 Driving Sprocket Net to net. 30 Chain Net to net. 31 Pinion Shaft Assembly Net to net. 32 Bearing (SKF 6203) or equivalent 33 Bearing (SKF 6203.C3) or equivalent 34 Bearing (SKF 6200) or equivalent 35 Needle Roller Bearing (KZK ) or equivalent 36 Needle Roller Bearing (KBK ) or equivalent Net to net. Net to net. Net to net. Net to net. Net to net. 37 Helical Gear Net to net. 38 Kick Starter Net to net. 39 Central Bush- brake Drum Net to net. 40 Horn Net to net. 41 Front Hub Pin Net to net. 42 Supressor Cap Net to net. 43 Bush Net to net. 44 High Tension Coil Net to net. 45 Control Cable Set (1 Set = 4 Nos.) 46 Rear View Mirror Set(1 Set=2 Nos.) Net to net. Net to net. 47 Wiring Harness Net to net. C181

182 48 Spark Plug Net to net. 49 Petrol Cock Assembly Net to net. 50 Front Suspension Spring Net to net. 51 Rear Shock Absorber Net to net. 52 Antidive Link Complete Net to net. 53 Auto Lamps Set (Bulbs only) (1 Set = 7 Nos.) C182 Net to net. 54 Decal (1 Set = 2 Nos.) Net to net. 55 Blinker Set (1 Set = 4 Nos.) (without bulbs) 56 Auto Switch Assembly (1 Set = 2 Nos.) Net to net. Net to net. 57 Throttle Pipe Net to net. 58 Tail Lamp Assembly (without bulbs) Net to net. 59 Spindle Net to net. 60 Ceramic Magnet Net to net. 61 Brake Liner Net to net. 62 Wiring Harness for Stator Net to net. 63 Front Link Net to net. 64 Speedometer Net to net. 65 Steering and Seat Lock & Key Net to net. 66 E.I.S Assembly (without SCR and Diode) 67 SCR and other Electronic Components Net to net. Net to net. 68 Diodes Net to net. 69 Reflector Net to net. 70 Head Lamp Assembly (without bulbs) Net to net. 71 Bobbin Charging Coil Net to net. 72 Duct Net to net. 73 Hot Die Steel Blocks 74 High Speed Steel 75 Inserts 76 Cutting Tools 77 Grinding Stone 78 Adhesives and Sealants 79 Steel Shots Note 1. The item of import and its specification should conform/match with. 2. Import items mentioned at Sl. No. 73 to 79 are allowed Upto 5% of FOB value of export. C CC to 75 CC 1 No 1 Metels Motorcycles in CBU/ a) Alloys Steel Sheet/Strips/Bars kgs SKD/ CKD condition b) CRCA Sheet/Coil/Strips kgs c) H.R.Coil/Strips kgs d) Aluminium Alloy Ingots kgs

183 e) M S Rods/ Bars kgs 2 Chemicals a) Synthetic Rubber (SBR/PBR) kgs b) Paints 1.0 kgs c) P U Foam kgs d) PVC leather cloth 2.20 kgs e) Nylon Granules 1.10 kgs f) HDPE Granules 1.10 kgs g) PVC Resin (Paste Grade) 0.50 kgs h) P.P. Granules 2.50 kgs 3 Components & Parts, Assemblies and Sub-Assemblies :- a) Bearings (C/SBRG-17) 2 Nos b) Bearings (Clutch BRG ) 1 Nos c) Bearings (Needle BRG. BIG) 1 Nos d) CDI Unit 1 Nos e) Generator Assembly 1 Nos f) Spark Plug 1 Nos g) High Tensile/Nut/Bolts Screw/Rivets. h) Piston,Piston Ring and Pin 1 set kg i) Gear Box 1 Nos. j) Flasher 1 Nos. k) Tail Light 1 Nos. l) Head Light 1 Nos. m) Speedometer 1 Nos. n) H.T. Coil 1 Nos. o) Brake Shoe 4 Nos. p) Cable 11 mtrs q) Reflector 2 Nos r) Indicator 2 Nos s) Filter 1 Nos t) Lock 3 Nos u) Automobile Bulb 7 Nos (1) The items of import and its specifications should conform with C968 Above 75 CC and upto 100 CC Motorcycle in CKD/SKD/CBU Condition 1 No. 1 Cold Rolled Prime Steel Sheets/Strips/Coils 2 Coated Prime Steel Sheets/Strips/Coils 3 Hot Rolled Prime Steel Sheets/Strips/Coils kgs kgs kgs 4 Seamless Alloy Steel Tubes Mtr. 5 Aluminium not kgs Alloyed/Aluminium Alloys 6 Silicon kg C183

184 7 Copper Cathode/Wire Bar/Rod kg 8 Super Enamelled/Enamelled Copper Wire C kg 9 Natural Rubber kgs 10 Nickel kg 11 Butyl Rubber gms 12 Synthetic Rubber (NBR /SBR/PBR) kg 13 Carbon Black kg 14 Poly Vinyl Chloride (PVC) Granules gms 15 Polypropylene Granules gms 16 PVC/Artificial Sq.Mtr. 17 Paints Ltr. 18 Nylon Granules kg 19 Main Shaft Assembly Net to net. 20 Crank Shaft Assembly Net to net. 21 Multiple Gear Assembly Net to net. 22 Front Shock Absorber Net to net. 23 Rear Shock Absorber (1 Set = 2 Nos.) Net to net. 24 Cylinder Block Net to net. 25 Carburettor Net to net. 26 Piston Assembly Net to net. 27 Bearing (SKF 6300) or equivalent 28 Bearing (SKF 6204) or equivalent 29 Bearing (SKF 6005) or equivalent 30 Bearing (SKF 6203) or equivalent 31 Bearing (SKF 6301ZR.C3) or equivalent 32 Bearing (SKF 6004.C3) or equivalent Net to net. Net to net. Net to net. Net to net. Net to net. Net to net. 33 Speedometer Complete Net to net. 34 Auto Cable Set (1 Set = 6 Nos.) Net to net. 35 Rear View Mirror Set (1 Set=2 Nos.) Net to net. 36 Wiring Harness Net to net. 37 High Tension Coil Net to net. 38 Solid State AC Flasher Assembly Net to net. 39 Auto Switches Set (1 Set = 4 Nos.) Net to net. 40 Chain Net to net. 41 Assembly Lamp Indicator Rear (1 Set = 2 Nos.) Net to net. 42 Decal (1 Set = 2 Nos.) Net to net.

185 43 Auto Lamps Set (Bulbs only) (1 Set = 8 Nos.) Net to net. 44 Clutch Bush Assembly Net to net. 45 Front Side Indication Lamp Assembly (1 Set = 2 Nos.) Net to net. 46 Front Link Assembly Net to net. 47 Ceramic Magnet Net to net. 48 Steering Lock Barrel/Key Net to net. 49 Tail Lamp Assembly Net to net. 50 Spark Plug Net to net. 51 Stator Harness Net to net. 52 Petrol Cock Assembly Net to net. 53 Horn Net to net. 54 Tool Kit Complete Net to net. 55 Needle Roller Bearing Net to net. 56 Hub Pin Set (1 Set = 2 Nos.) Net to net. 57 Elctronic Ignition Unit Assembly (without SCR & Diode) Net to net. 58 Bush Net to net. 59 Outlet Tube Assembly Assembly Net to net. 60 Sector Gear Assembly Net to net. 61 Reinforcement Assembly Net to net. 62 Carrier Assembly Net to net. 63 Regulator Assembly Net to net. 64 Oil Seal (1 Set = 2 Nos.) Net to net. 65 Nipple Spoke (1 Set = 72 Nos.) Net to net. 66 Sprocket Wheel (1 Set = 2 Nos.) Net to net. 67 Manifold Net to net. 68 Kick Starter Net to net. 69 Inner Cage Net to net. 70 Bearing Carrier Net to net. 71 Spoke (1 Set =36 Nos.) Net to net. 72 Engine Gear Net to net. 73 Pillion Holder Net to net. 74 SCR and other Electronic Components Net to net. 75 Diodes Net to net. 76 Hot Die Steel Blocks 77 High Speed Steel 78 Inserts 79 Cutting Tools 80 Grinding Stone 81 Adhesives and Sealants 82 Steel Shots C185

186 Note. 1 The item of import and its specification should conform/match with. 2. Import items mentioned at Sl. No. 76 to 82 are allowed Upto 5% of FOB value of export. C969 Agricultural Tractor in CKD/ SKD/ CBU/ SKID condition thereof 1 No. 1 Air Filter 1 No. 2 Automotive Battery 1 No. 3 Bearing (All types other than Net to net. Engine Bearing) such as Ball Bearing/ Taper/ Cylindrical/ Needle Roller Bearings 4 Brake Assembly (Prime and/ or 1 No. Secondary) 5 Clutch Assembly (Including 1 No. Split/ Torque Type) 6 Internal Combustion Engine 1 No. Complete 6 a) Piston Rings Net to net. b) Gaskets 1 No. c) Oil Seal for Engine (Front and/or 2 Nos. Rear) d) Pistons 4 Nos. e) Injectors 4 Nos. 7 Fuel Injection Pump 1 No. 8 Front Axle (2 Wheel Drive 1 No. and/or 4 Wheel Drive) complete and/or Parts/ Accessories 9 Fuel Filter 1 No. 10 Hydraulic Pump (Including 1 No. Auxiliary hydraulic Pump) 11 Hydraulic Cylinder 1 No. 12 Hydraulic Valves 1 No. 13 Oil Seals (other than Engine) Net to net. 14 Oil Pump 1 No. 15 Hydrostatic Unit/ Valves for 1 No. Hydraulic Transmission 16 Radiator 1 No. 17 Seat Assembly 1 No. 18 Synchropacks and/or 1 No. Synchroniser 19 Silencer 1 No. 20 Frontwheel Tyre 1 Set 21 Rearwheel Tyre 1 Set 22 Frontwheel Tyretube 1 Set 23 Rearwheel Tyretube 1 Set 24 Front Wheelrim 1 Set 25 Rear Wheelrim 1 Set 26 Water Pump Seal 1 No. 27 Water Pump 1 No. 28 'O' Ring Net to net. 29 Transmission complete or 1 No. C186

187 C970 C971 Alternator Assembly Aluminium Pistons, exported in fully machined condition C187 components thereof 30 Alternator 1 No. 31 Starter Motor 1 No. 32 Turbo Charger 1 No. 33 Safety Neutral Switch 1 No. 34 Rops (Safety Equipment) Roll Over Protection Frame 1 Set 35 Wiring Hanrness 1 Set 36 Oil Seperator 1 Set 37 Auxiliary Valves 1 No. 38 Relevant Alloy Steel Rods/ Rounds/ Billets 39 Relevant Hot Rolled/ Cold Rolled Steel (Sheets/ Wide Coils) 1 No 1 Copper electrolytic grade 0.7 Kg standard wire/ bar/ rod 2 CR Steel Sheet extra deep drawing 0.8 to 1 mm thick 4.2 Kg 3 Steel rod free cutting ENIA/SAE- 5.3 Kg 8620 or eqv mm dia 4 Solder - Tin - 80% Lead - 20 % 0.01 Kg 1 M.T. of piston 5 Polyester sheet/strip/film 25 to 0.04 Kg 200 Micron thick 6 Ball Bearings 2 Nos 1.1 kg/ kg content in. 1.1 kg/ kg content in. 7 Power (Rectifier) Diodes Net to Net 8 Regulator Net to Net 9 Rectifier 3A 200 V PIV Net to Net 1 Aluminium/ Aluminium Scrap 1279 kg 2 Copper 12 kg 3 Nickel 12 kg 4 Magnesium 18 kg 5 Silicon 162 kg C972 Steel Anchor Pin 1.0 kg 1 Non-Alloy Steel Round/ Billets kg/kg Content in. C973 C974 Armature for Delcoremy type motor Armature for Dynamo 1 No 1 Copper electrolytic grade 2 Kg standard wire/ bar/ rod 2 CR Steel Sheet extra deep drawing 0.5 to 1 mm thick 6 Kg 3 Steel rod free cutting FNIA/SAE- 2.3 Kg 8620 or eqv mm dia 4 Solder Tin - 80% Lead - 20 % 0.05 Kg 1 No 1 Copper electrolytic grade 0.6 Kg standard wire/ bar/ rod 2 CR Steel Sheet extra deep drawing 0.5 to 1 mm thick 1.6 Kg 3 Steel rod free cutting ENIA/SAE- 0.5 Kg 8620 or eqv mm dia 4 Solder Tin - 80% Lead - 20 % 0.02 Kg 5 Polyester sheet/strip/film 25 to 0.02 Kg

188 C975 C976 C977 C978 C979 C980 C981 Asbestos brakelinings with Brass chips Asbestos brakelinings without Brass chips Asbestos Clutch Facings Asbestos Disc Brake Pads Asbestos Free brakelinings with Brass chips Asbestos Free brakelinings with Nitrile Rubber Asbestos Moulded Non- Metallic Brake Lining C Micron thick 1 Kg 1 Phenol Formaldehyde Resin Kg 2 Brass Chips Kg 3 Asbestos raw 7015 grade Kg 4 Asbestos Raw grade Kg 1 Kg 1 Phenol Formaldehyde Resin Kg 2 Asbestos Raw 7015 grade Kg 3 Asbestos Raw 5221 grade Kg 1 Kg 1 Phenol formaldehyde Resin Kg 2 Brass Chips Kg 3 Asbestos Raw 7015 grade Kg 4 Asbestos Raw grade Kg 1 kg 1 Phenol Formaldehyde Resin 0.18 kg 2 Asbestos Raw in different grades 0.65 kg 3 Other items namely Aluminium Powder, Brass Chips, Brass Powder, Acrylonitrile Butadiene Rubber/ Nitrile Butile Rubber, Copper Powder, Bonding Adhesive 4 Misc. items: Grinding Wheels (Diamond/Abrasive), Electrometallic Slitting Saws, Carbide Tips, Mould Releasing Solution, Endless Emery Belts 1 Kg 1 Phenol Formaldehyde Resin Kg 2 Fibre Class Chopped Strands Kg 3 Brass Chips Kg 4 Misc. items: Grinding Wheel, Diamond/Abrasive Electrometallic Slitting Saw Carbide Tips, Mould Release Solution and Endless Emery Belt Not exceeding 4% of the FOB value of export Upto 3% of the FOB value of export Upto 3% of FOB value of export. 1 Kg 1 Phenol Formaldehyde Resin 0.22 Kg 2 Fibre Glass Chopped Strands Kg 3 Other items namely Aluminium kg Powder, Brass Chips, Brass Powder, Acrylonitrile Butadiene Rubber/ Nitrile Butile Rubber, Copper Powder, Bonding Adhesive 4 Misc. items: Grinding Wheel, Diamond/Abrassive Electrometallic Slitting Saw Carbide Tips, Mould Release Solution and Endless Emery Belt. Upto 3% of FOB value of export 5 Iron Powder Kg. 1 kg 1 Phenol Formaldehyde Resin 0.25 kg 2 Asbestos raw in different grades/ 0.70 kg Asbestos Yarn 3 Other items namely Aluminium Powder, Brass Chips, Brass Powder, Nitrile Butile Rubber/ Not exceeding 5% of the FOB value of export

189 C982 C983 C984 C985 Asbestos Moulded Clutch Facings Automobile Tyre-Tube Valves Automotive Radiator Core (Copper and Brass Construction) Automotive Radiators made of Copper and Brass Copper Powder, Bonding Adhesive 4 Misc. items: Grinding Wheels (Diamond/ Abrasive), Electrometallic Slitting Saws, Carbide Tips, Mould Releasing Solution, Endless Emery Belts 1 kg 1 Phenol Formaldehyde Resin 0.24 kg 2 Asbestos raw in different grades/ 0.70 kg Asbestos Yarn 3 Other items namely Aluminium Powder, Brass Chips, Brass Powder, Nitrile Butile Rubber/ Copper Powder, Bonding Adhesive 4 Misc. items: Grinding Wheels (Diamond/Abrasive), Electrometallic Slitting Saws, Carbide Tips, Mould Releasing Solution, Endless Emery Belts 1 kg 1 Brass Scrap/Brass Rods C189 Upto 3% of the FOB value of export Upto 2% of the FOB value of export Upto 3% of the FOB value of export 1.10 kg/kg content in 1 a) Copper Scrap 1.10 kg/kg content in b) Zinc Ingot 1.10 kg/kg content in 2 Nitrile/Silicon Rubber/Teflon Tubing/Butyl Rubber 1.05 kg/kg content in 3 Rubber Chemicals 8% of weight of Rubber content in export 4 Lead Refined 1.05 kg/kg content in export 1 kg 1 Copper 0.26 kg Foils/Sheet/Strips/Plate/Ingot/Cat hodes 2 Brass Foils/Tubes 0.26 Kg 3 Brass Sheet 0.32 Kg 4 a) Tin Ingot kg b) Lead Ingot Kg 1 kg 1 Copper Foils/Sheet/Strips/Plate/Ingot/Cat hodes 2 Brass Foils/Tubes (a) Copper Cathode/ Wire Bar/ Ingot/ Rod (b) Zinc Ingot 3 Brass Sheet (a) Copper Cathode/ Wire bar/ Rod (b) Zinc Ingot 4 (a) Tin Ingot (b) Lead Ingot 5 Terene Sheet or CRCA Sheet/Coil/Strips 0.22 kg 0.22 kg kg 0.07 kg 0.31 kg kg kg kg kg 0.22 kg 6 Flux 1% of the FOB value

190 C986 C987 C988 C989 Automotive timing chain 1.0 kg Content of Import Item Automotive Timing Chains for four wheeler application Automotive Water Pump Axle Shaft 1 Non-Alloy Steel Round/ Billets kg 1 kg 1 Cold Rolled Alloy Steel Strip kg 2 Cold Rolled Medium Carbon kg Steel Strip 3 Alloy Steel Wire Rod kg 1 No. 1 Integral shaft water pump bearing Net to Net Ball Bearings (SKF No. to be Net to Net specified) 2 Seal Assembly 1 No. 3 Aluminium Alloy 1.10 Kg. per Kg. of aluminium alloy content in the export product 1 MT. 1 Carbon/Alloy Steel Bars of relevant Grade C MT/MT content in. 2 Unwrought Zinc 4% of the weight of Steel in export product. C990 BB Axle 1.0 kg 1 Non-Alloy Steel Round kg/kg Content in. C991 Brake shoe plate 1 kg 1 HR Steel sheet/ strips/ coils 1.10 kg C992 Bronze/ Gun Metal Impellers for pumps, all types 1 Kg 1 Brass Scrap Kg/Kg of Brass content in export C993 Cam 1 kg 1 Steel of quality EN 39A 1.39 kg C994 Cam Shaft 1 kg 1 Non-Alloy Steel Rounds 1.47 kg/kg content in. C995 CBH Flate for starter 1 No 1 C R Steel sheet extra deep 0.4 Kg motor drawing 0.5 to 4 mm thick 2 Carbon brush 2 Nos C996 C997 C998 Chain Cover Hinges Shakle Plates made of CRCA Sheet Cluch Cover Assembly Clutch Plate/Disc Assembly/Driven Plate 1 kg 1 Mild steel CRCA Sheets/ cuttings/ coils/ defective/ secondary 1 kg. 1 CRCA Sheet/ Coils (EDD Quality) 2 High Carbon/Medium Carbon Steel Strips 1.05 kg/kg Content in kg/kg content in 1.40 kg/kg content in 3 Spring Steel Wire 1.10 kg/kg content in 1 kg 1 CRCA Sheet/Coil 1.8 kg/kg content in 2 High Carbon/Medium Carbon Steel Strips 1.8 kg/kg content in 3 Alloy Steel Bars 1.8 kg/kg content in 4 Spring Steel Wire 1.10 kg/kg content in 5 Friction Facing (To be allowed 2 Nos./Assembly only when, supplied with friction facing) C999 Commutator 1 No 1 Copper electrolytic grade wire/ 0.5 Kg

191 C1000 Cone Sleeve/Axle Stud sleeve C191 standard grade bar/ rod 1.0 kg. 1 Seamless Steel Tubes kg/kg content in. C1001 Connecting Rod Forging 1 No. 1 Forging quality Alloy Steel in Bars/ Billets MT C1002 Connecting Rods 1.0 kg 1 Non-Alloy Steel rounds 1.47 kg/kg content in. C1003 Cooling Fins 1 MT 1 CRCA Steel Coils/Sheets 1.05 MT C1004 Cotter pin (Split Unsplit ) made of non-alloy steel. C1005 Cotter Pin(Split /Unsplit ) made of Alloy Steel 1Kg. 1 Non-Alloy Steel Round/Bar 1.10 kg 1 kg 1 Alloy Steel Rounds/ Bar 1.10 kg C1006 Crank for chain wheel 1.0 kg 1 Non-Alloy Steel Round kg/kg content in. C1007 C1008 C1009 C1010 C1011 C1012 C1013 Crank Shaft (for four wheelers) Crank Shaft (for two wheelers) 1.0 kg 1 Non-Alloy/ Alloy Steel rods 1.60 kg/kg content in. 1.0 kg 1 Non-Alloy Steel rounds 1.47 kg/kg content in. Crank-shaft Forgings/ 1 KG 1 Forging quality alloy steel kg connecting rod forgings 2 Forging quality carbon steel kg Cylinder block for two wheelers Cylinder Head Gasket Deep Well Hand pump complete without connecting Rods with/ without spares & Tools Deepwell hand pump with connecting rods. 1 kg 1 Aluminium/Aluminium Alloy 1.2 kgs 1 No. 1 Copper Wire Bar 1.05 kg/kg content in 1 No.(Net weight of pump minimum 70 Kg) 1 No (net wt of pump 2 Asbestos Jointing Sheet 1.25 kg/kg content in 3 Tool Steel Upto 1% of FOB Value of export. 1 M.S.Sheet/ Plate/ Angle/ Rounds/ 61.6 Kgs Bar 2 CRCA sheet 2 mm 1.85 Kgs 3 Gun Metal Scrap 2.37 Kgs 4 Pig Iron 7.99 Kgs 5 Brass 0.61 Kg 6 Nitrile Kg 7 Stainless Steel/Special Sheet 1.10 Kgs Rounds 8 Zinc 3.0 Kgs 9 Ball Bearings 2 Nos. 10 Fasteners 0.72 Kg 11 Roller Chain 0.43 Kg 12 Misc. items: Welding electrodes, Electroplating salts, Cutting & other Tools measuring instruments 1 M.S. Sheet/ Plate/ Angle/ Round/ Bar CIF value limited to 3% of FOB value 90 kg

192 C1014 Delivery valve of Fuel Injection Equipment minimum kg 2 CRCA Sheet 2 mm 1.85 kg 3 Gun Metal Scrap 2.37 kg 4 Pig Iron 7.99 kg 5 Brass 0.61 kg 6 Nitrile Rubber 0.095kg 7 Stainless Steel/ Special Steel 1.10 kg Rounds 8 Zinc 3.0 kg 9 Ball Bearings 2 Nos 10 Fasteners 0.72 kgs 11 Roller Chain kg 12 Misc. items: Welding Electrodes, 3% of FOB Electroplating salts, cuttings and other tools measuring instruments 1 kg 1 Alloy Steel Bars/Coils Type 18 CR N 18/SAE 3415/16 mm MM CR 5/Equivalent 1.10 Kg 2 Alloy Steel Bars/Coils Type SAE 2.93 Kg 52100/Equivalent 3 Miscellaneous Items: Upto 3% of FOB value of export a)grinding Wheel (with or without Framework) b)cbn/ Diamond Honing Stick Blank/ Support Stones/ Deburring Tools c)carbide Cutter d)plain Grinding Wheels/ CBN Wheels C1015 Diesel Engine Parts (not 1 kg 1 Mild Steel 1.10 kg elsewhere specified) 2 Relevant Nylon (6/66) 1.05 kg/kg content in export C1016 Diesel Engine Parts (not 1 kg 1 Pig Iron 1.10 kg elsewhere specified) 2 Relevant Nylon (6/66) 1.05 kg/kg content in export C1017 Draw bars 1.0 kg 1 Non-Alloy Steel Round/ Billets 1.5 kg/kg content in. C1018 Drive assembly for 1 No 1 Steel rod free cutting ENIA/SAE- 3 Kg starter motor 8620 or eqv mm dia C1019 Drum Brake Assembly (Aggregate/SKD/CKD/KI TS) 1 kg 1 HR Sheets/Coils 1.47 kg. 2 Alloy/Non Alloy Steel 0.21 kg. Bars/Billets/Rounds 3 Castings (Unmachined) 0.18 kg. 3 Pig Iron 0.25 kg. 4 Fasteners Like Nuts/Bolts/Springs/Shoe Set/Pins etc. C192 Upto 6% of FOB value of exports. 5 Friction Material Upto 12% of FOB Value of exports.

193 C1020 C1021 C1022 C1023 C1024 Electric Starter End-Cap Assembly Engine Patti PGT ZP EPDM Rubber Bonded Bi-components EPDM Rubber Bonded Door Beading 6 Bonding Adhesive Upto 8% of FOB Value of exports. 7 Misc. items: Assembly Fluid, Grease, Cutting Tools Like Drills/Taps/Reamers 1 No. 1 Magnet 2 Nos. 2 Commutator 1 No. 3 Carbon Brush 2 Nos. 4 Ball Bearing 1 No. 5 Moulding Powder (Specific Item to be specified both in application and licence) 1 No 1 Copper electrolytic grade standard wire/ bar/ rod 2 CR Steel Sheet extra deep drawing 0.8 to 1 mm thick C193 Upto 6% of FOB Value of exports. 1 kg/kg content in export item. 0.9 Kg 0.02 Kg 3 Steel rod free cutting ENIA/SAE Kg 8620 or eqv mm dia 1 kg. 1 CRCA Sheet/ Coils 1.59 kg 2 Zinc kg 1 kg 1 CRCA Steel Sheet/Coil in kg mm and 0.45 mm thickness 2 Carbon Black kg 3 EPDM Synthetic Rubber 0.35 kg 4 Rubber Chemicals (Accelerator kg and Zinc Oxide) 1 kg 1 CRCA Steel Sheet/Coil in kg mm and 0.45 mm thickness 2 Carbon Black kg 3 EPDM Synthetic Rubber kg 4 Rubber Chemicals (Accelerator and Zinc Oxide) C1025 Fan Blade 1 kg 1 MS CRCA sheet/ strips/ coils including seconds/ defectives but excluding coated C1026 C1027 C1028 Field Coil for Starter Motor Flex Plate Assembly Flurocarbon Rubber (Viton) Oil Seals kg 1.05 kg 1 No 1 Copper electrolytic grade 0.85 Kg standard wire/bar/rod 2 Solder Tin - 80 Lead - 20% 0.03 Kg 1 Kg. 1 Non-Alloy Steel Rounds and/or 1.32 Kg/Kg content billets and/or Rolled Sections viz. in. Plate/Flat/Bar/Rod 2 Non-Alloy Steel Prime and/or defective and/or second and/or Pickled Sheets and/or coils and/or strips 1.37 Kg/Kg content in. 3 Misc. items: Hobs, Carbide Tools upto 3% of FOB value 1 kg 1 Raw material: a) MS CRCA Sheet/Strips/Coils including Seconds/Defectives but excluding Coated Kg/Kg content in. b) Polyacrylic Rubber Compound 1.33 Kg/kg content in. 2 Composition of the Compound

194 per Kg. : a) Flurocarbon Rubber 0.68 Kg b) Carbon Black 0.13 Kg c) Misc. Chemicals and Rubber Chemicals: Zinc Oxide, Stearic Acid, Antioxidants, Accelerator, Plasticizer, Process Aids, Sulphur, Bonding Agent and Processing Oil Note : 1. Rubber Chemicals should not exceed 0.02 kg of total chemicals. C1029 C1030 C1031 Flywheel Starter Ring Gear Forged Crankshaft Fully machined (Made of Alloy/Non-Alloy Steel) Front Axle Beam-Fully Machined 1 kg content of Import Item 1 No. with specified weight 1 Non-Alloy Steel Round and/or Billets and/or Rolled Sections viz. Plate/Flat/Strip/Bar/Rod 0.07 Kg 1.32 kg 2 Misc. items: HOS/Graphite Tools Upto 3% of FOB value of export 1 Alloy/Non-Alloy Steel bars/rods/billets/blooms/ingots (only relevant steel required is to be allowed i.e. against Alloy Steel product, Alloy Steel and against Non-Alloy Steel product, only Non-Alloy Steel isto be allowed 2 Misc. items: Rectangular Die Steel Blocks and Die Steel Rounds, Consumables including consumable tools 1.84 kg/kg content in 4 % of FOB Value. 3 Furnace Oil 0.5 KL/MT of export 1 MT 1 Forging Quality Non-Alloy Steel 1.80 MT in Blooms/Billets/Bars 2 Rectangular Die Steel Blocks & Die Steel Rounds MT 3 Furnace Oil 0.5 KL C1032 Front Axle beam/i-beam 1.0 kg 1 Non-Alloy Steel Round/ Billets 1.3 kg/kg content in. C1033 Three Wheeler Drive Away Chassis/ Freight Carrier Powered by Petrol engine of 125 CC to 300 CC in CBU/ SKD/CKD Condition 1 No. 1 Cold Rolled (Prime) Steel Sheets/Strips/Coils 2 Coated (Prime) Steel Sheets/Strips/Coils 3 Hot Rolled (Prime) Steel Sheets/Strips/Coils 1.20 kg/kg content in 1.16 kg/kg content in 1.13 kg/kg content in 4 Alloy Steel Wire 1.07 kg/kg content in 5 Aluminium Alloy Ingots 1.04 kg/kg content in 6 Seamless Steel Tubes 1.02 kg/kg content in 7 Super Enamelled/ Enamelled Copper Wire 1.01 kg/kg content in 8 Natural Rubber 1.05 kg/kg content in 9 PVC/Artificial Leather Cloth 1.05 Sq.mtr/Sq.mtr content in the export product 10 Polyol 1.05 kg/kg content in C194

195 11 Isocyanate 1.05 kg/kg content in 12 Butyl Rubber 1.05 kg/kg content in 13 Relevant Synthetic Rubber (NBR/ SBR/ PBR) 14 Carbon Black 0.40 kg 15 Poly Vinyl Chloride (PVC) Granules C kg/kg content in 1.05 kg/kg content in 16 Polypropylene Granules 1.05 kg/kg content in 17 Paints 1% of the FOB value 18 Nylon Granules 1.05 kg/kg content in 19 Main Shaft Assembly Net to net 20 Crank Shaft Assembly Net to net. 21 Relevant set of gears-1 set each Net to net. 22 Front Shock Absorber Net to net. 23 Cylinder Block Net to net. 24 Carburettor Net to net. 25 Piston Assembly Net to net. 26 Bearing (FAG C3) or Net to net. Equivalent 27 Bearing (SKF 6204) or Net to net. Equivalent 28 Bearing (SKF6301) or Net to net. Equivalent 29 Bearing (SKF 1203) or Net to net. Equivalent 30 Bearing (FAG 98205) or Net to net. Equivalent 31 Bearing (SKF 6004) or Net to net. Equivalent 32 Bearing(SKF ) or Net to net. Equivalent Needle bush 33 Speedometer Complete Net to net. 34 Control Cable Set Net to net. 35 Rear View Mirror Set Net to net. 36 Wiring Harness set Net to net. 37 High Tension Coil Net to net. 38 Solid State AC Flasher Assembly Net to net. 39 Auto Switches Set Net to net. 40 Rotor Net to net. 41 Automotive lights with bulbs Net to net. 42 Magnet container assembly/ rotor Net to net. 43 Lock assembly Net to net. 44 Spark Plug Net to net. 45 Horn Net to net. 46 Tool Kit Set Net to net.

196 47 Needle Bush Net to net. 48 Hub Pin Set (1 Set =2 Nos.) Net to net. 49 Diodes Net to net. 50 SCR and other Electronic Components C196 Net to net. 51 Chain Net to net. 52 Battery Net to net. 53 Splined Shaft Net to net. 54 Hand Brake Drive Complete Net to net. 55 Chain Adjuster/ Tensioner Net to net. 56 Terminal Board Net to net. 57 Ring Nut-Right Net to net. 58 Lamination Pack Coil Net to net. 59 Idler Net to net. 60 Set of Sprocket Net to net. 61 Complete Clutch Cover shaft Net to net. 62 Bush with Teeth Net to net. 63 Trunion Net to net. 64 Set of Bearing Races Net to net. 65 Cam Net to net. 66 Engine Gear Net to net. 67 Reverse Control Gear Net to net. 68 Idler Gear Assembly Net to net. 69 Condenser Net to net. 70 Wheel Axle Assembly Net to net. 71 Differential Assembly Net to net. 72 Brake Lever Assembly Net to net. 73 Brake System and parts thereof Net to net. 74 Wiper Motor Net to net. 75 Upper Attachment Net to net. 76 Wiper Blade Assembly Net to net. 77 Wind Shield Glass Net to net. 78 Torsion Bar Net to net. 79 Anti Vibration Mounts Net to net. 80 Catalytic Converter Net to net. 81 Clutch Gears Cross Net to net. 82 Clutch Assembly and Parts thereof Net to net. 83 CNG Cylinder Net to net. 84 CNG /LPG KIT (excluding Cylinder) Net to net. 85 Cones Net to net. 86 Crankcase Net to net. 87 Crankcase Cover Net to net.

197 88 Cross Net to net. 89 Cylinder Head Casting Net to net. 90 Fan Cowl Net to net. 91 Flexible Coupling/Flange Net to net. 92 HUB (set of 2) Net to net. 93 Isolator Vibration Net to net. 94 Lever GR Stop Control Net to net. 95 Lever Group for Max Controlling Net to net. 96 Oil Plug Assembly Net to net. 97 Regulating Lever Assembly Net to net. 98 Reverse Motion Shaft Net to net. 99 Rod Control lever Sub-Assly Net to net. 100 Screw Net to net. 101 Set of Rings Net to net. 102 Set of Seals Net to net. 103 Set of Spacers Net to net. 104 Spark Advance Regulator Assly Net to net. 105 Starter Motor Net to net. 106 Starting Ring Gear Net to net. 107 Tappet Cup Net to net. 108 Thrust Bearing Group Net to net. 109 Tyre (set of 4 Nos) Net to net. 110 Valve for Piston Cooling Net to net. 111 Valve of set Net to net. 112 Torsion Bar Bearing Assembly Net to net. 113 Wheel Cylinder Net to net. 114 Upper Pin Net to net. 115 Lower Pin Net to net. 116 Hot Die Steel Blocks 117 High Speed Steel 118 Cutting Tools 119 Inserts 120 Steel Shots 121 Adhesives and Sealants 122 Grinding Stone Note: CIF value of item mentioned at Sl. No. 116 to 122 taken together is restricted to 5% of FOB value C1034 Front/rear axle shaft 1Kg. 1 Non-Alloy Steel Round/ Billets kg C1035 Single Cylinder Fuel 1 No. A.Raw Materials: Injection Pumps for Diesel Engines 1 Alloy steel Bars/Coil to specification SAE or equivalent 2 Alloy steel Bars/Coil to Specification SAE 3415 or 16 Mn CrS5 or equivalent C kg/kg content in export kg/kg content in export.

198 3 Pig Iron 1.40 kg/kg content in export 4 Free Cutting Leaded/Non Leaded Bars/Coils including Ultrasonically tested Steel or equivalent 5 Steel to specification EN 8M or VS or equivalent C kg/kg content in export 3.22 kg/kg content in export 6 Spring Steel 1.11 kg/kg content in export B.Components: 7 Element Net to net. 8 Delivery Valve Net to net. 9 Protective Cap Compression Spring 10 O Ring Net to Net 11 Round Head Grooved Screw Net to Net 12 Guide Plate Net to Net 13 Protective Cap Net to Net 14 Clamping Ring Net to Net 15 Pin Net to Net 16 Fillister Head Screw Net to Net 17 Spring Seat Net to Net 18 Guide Pin Net to Net 19 Plug Net to Net 20 Spring Ring Net to Net 21 Filler Piece Net to Net 22 Eccentric Bolt Net to net 23 Gasket Net to Net 24 Sleeve Net to Net 25 Control Rod net to net 26 Roller net to net 27 Roller Tappet Body net to net 28 Control Sleeve net to net 29 Retaining Ring net to net 30 Eccentric Pin net to net 31 Screw Plug Net to net C.Miscellaneous Items: CNB/Diamond Honing Stick Blanks/Support Stone/Deburring Tools, Hone Holders, Plain grinding Wheels/ Disc Wheels for lap/ Match Grinding/ CNB Wheels, Carbide End Mills/ Tools, Gem Shaper, Diamond Dresser, DeepHole Drill, Reamers, Oil Stones, Broaches, Drill & Calibration Fluid/ Test Oil C1036 Fuel Tank Cap 1 kg 1 MS CRCA sheet/ strips/ coils 1.12 kg cif value limited to 3% of the fob value of export

199 C1037 C1038 C1039 C1040 Full Tension Sleeve made of Steel. including seconds/ defectives but excluding coated 1Kg. 1 Non-Alloy Steel Round/ Billets 1.4 kg/kg content in. Gasket Composite Sheetdouble 1 MT 1 Electrolytic Tin Plate Waste 666 kgs. Cemjo 2 Raw Asbestos Fibre: Grade 7M kgs. Grade 6D kgs. Gasket Composite Sheet- 1 MT 1 Electrolytic Tin Plate Waste 927 kgs. Double Steel Faced Cemjo 2 Raw Asbestos Fibre: Grade 7M Grade 6D C kgs. 25 kgs. Gasket Composite 1 MT 1 Electrolytic Tin Plate Waste 743 kgs Sheets-Single Cemjo 2 Raw Asbestos Fibre: Grade 7M kgs. Grade 6D kgs. C1041 Gaskets 1 Meter 1 Grafoil Tape (Papyox Smooth Robbon) C1042 C1043 C1044 C1045 Generator (Dynamo) Assembly Half Collets for engine valves Hand Primer for Fuel Feed Pumps of Diesel Vehicles Handpump with connecting /pump rods (Model Afridev) 1 No 1 Copper electrolytic grade standard wire/ bar/ rod 2 CR Steel Sheet extra deep drawing 0.8 to 1 mm thick 1.1 Mtr./Mtr. net content in export product. 1.6 Kg 6.5 Kg 3 Steel rod free cutting ENIA/SAE- 1.2 Kg 8620 or eqv mm dia 4 Solder Tin - 80% Lead - 20 % 0.03 Kg 5 Polyester sheet/strip/film 25 to 0.03 Kg 200 Micron thick 6 Carbon brush 2 No 7 Ball Bearings 2 No 1 Kg 1 Cold Rolled (Profile) Non-Alloy Carbon Steel Strip Kg 1000 Nos. 1 Free Cutting Leaded Steel Bars 416 kgs. 1 No (Net wt of Pump minimum 78.6 kg) 1 M.S. Sheet/ Plate/ Angle/ Round/ Bar 55 kg 2 CRCA Sheet 2 mm 4.75 kg 3 Brass 2.2 kg 4 Nitrile Rubber 0.66 kg 5 Stainless Steel/ Special Steel 13.34kg Rounds 6 Zinc 3.5 kg 7 Welding Electrodes Upto 2% of FOB value of exports. 8 PVC Resin 2.8 kg 9 Nylon 6/66 Granules (moulding grade) (Only relevant item required/used is to be allowed) 1.8 kg Note : 1. The quantity of import item 5 will increase with increase in the number of Connecting/Pump

200 Rods on pro-rata basis. C1046 Helical Coil Spring 1 kg 1 Spring Steel Wire rod 1.10 kg Spring Steel wire 1.01 kg C1047 Steel Hub Bolts 1Kg. 1 MS/Alloy/Non-Alloy Steel kg Rounds C1048 Steel Hub cone 1Kg 1 Non-Alloy Steel Round kg C1049 Ignition Coil oil filled 1 No 1 Copper Wire enamelled 22 to Kg SWG 2 Insulating Kraft paper electrical grade 0.02 Kg 3 Silicon steel sheet 0.5 to 1 mm thick 0.3 Kg C1050 Ignition Coil Resin Cost 1 No. 1 Copper electrolytic grade 0.14 Kg standard wire/ rod/ ingots 2 Insulating Kraft paper electrical 0.15 Kg grade 3 Silicon steel sheet 0.5 to 1 mm 0.80 Kg thick 4 Epoxide resin Kg C1051 C1052 C1053 C1054 Incandascent Automobile Bulbs upto 30 Volts Inlet /Exhaust Valves Deleted Integral Shaft Water Pump bearing for automotive applications 5 Hardner Kg 100 Nos. 1 Soda Glass Tubing 1.15 kg/kg content in exports. 2 Tungston Filament 115 Nos./100 Nos. of relevant Tungston Filament in exports. 3 Glass Shell 125 Nos./100 Nos. of Glass Shell in exports. 4 Lamp Caps 115 Nos./100 Nos. of Lamp Caps in exports. 1Kg. 1 Valve steel (Alloy Steel/ Non- Alloy Steel) Bars Inconel Alloy 751 Bars 2 Hard Facing Metal Alloy Powder of Grade Ni60, Stellite 1, 6 and 12 C kg/kg content in 1.20 kg/kg content in 10 gms/valve 1 Kg 1 SAE Ball Bearing Steel Kg and/or Alloy Steel; Hot Rolled and/or Cold Reduced/Cold oilgared and/or Spherodised Annealed and/or phosphate Coated; Seamless Tubes and/or Pipes in Random Lengths (ExcludingStainless Steel) 2 Nickel Chromium and Molybdenum Base Steel and/or Alloy Steel; Hot Rolled and/or Cold Drawn and/or Spherodised Annealed and/or Phosphate Coated; Wire Rods and/or Bars; in Random Lengths(Excludingstainless steel) Kgs 3 SAE Ball Bearing Steel Kg and/or Alloy Steel; Hot Rolled

201 C1055 C1056 King Pin made out of Steel. Laminated Leaf Springs of steel. and/or Cold Drawn and/or Spherodised Annealed and/or Phosphate Coated wire and/or Wire Rods and/or Bars; In Random Lengths (Excluding Stainless Steel) 4 Cold Rolled Spring Steel Sheets Kg and/or Strips and/or Coils 5 Misc. Items: Honing Sticks and/ or Internal and/ or External Track and/ or Raceway Grinding Wheels 2.5% of FOB value 1 kg 1 Relevant Alloy Steel Rounds 1.10Kg 1 kg. 1 Relevant Silico Mangenese Steel kg C1057 Laminated Springs 1 kg 1 Spring Flat Bar 1.05 kg C No. 1 a) Pure Lead 1.02 kg/kg content in Lead Acid Storge Batteries of all types/battery Cells. b) Antimony 1.02 kg/kg content in c) Lead Calcium Alloy containing Calcium between 0.035% to 0.16% and Tin upto 1.7% 1.04 kg/kg content in. 1 a) Pure Lead 1.02 kg/kg content in. b) Antimony Lead Alloy 1.02 kg/ kg content in. 2 Battery Separators Rolls of Battery Seperators 2 a) Synthetic Pulp Porous Paper Sheet Net to net 1.05 Sq.Mtr./Sq.Mtr content in the export product 1.05 kg/kg content in a) Polythelene Sheet 1.03 kg/kg content in. b) Acid Resistant Glass 1.05 kg/kg content in c) Nitrile Rubber Based Glue 1.05 kg/kg content in 3 Tubular Bags Net to net 4 Relevant Battery Cell Container and and Lids/ Relevant Battery Container and Lids Polypropylene Granules Net to net 5 Battery Vent plugs Net to net 6 Polarity Indicator Rings Net to net 7 Rubber Grommet Net to net 8 Electrolytic Copper Net to net 1.05 kg/kg content in 9 Pure Tin 1.02 Kg/Kg Content C201

202 C1059 Commercial Vehicles of GVW upto 7.5 MT in CBU/SKD/CKD condition 10 Lignin 1.02 kg/kg content in 11 ABS Resin kg/kg content in 12 Epoxy Resin 1.05 kg/kg content in 13 Hardner 1.05 kg/kg content in 14 Pigment Red/Black 1.05 kg/kg content in 15 Ink for Silk Screen 1.01 kg/kg content in 16 Additives 1.05 kg/kg content in 17 Terminals Net to net 18 Safety vent valves Net to net 1 No. A. RAW MATERIAL 1 Hot Rolled Steel Plates KG 2 Thermo-Plastic Tubing (Nylon) KG. 3 Terne Coated Steel Coils KG. 4 Cold Rolled Steel Sheets KG. B. COMPONENTS F: GEAR BOX 5 Toothed Wheel (Gear) 8 NO. 6 Shaft 4 NO. 7 Shim 1 NO. 8 Front Cover 1 NO. 9 Adjustment Ring 1 NO. 10 Sliding Sleeve 3 NO. 11 Fixed Hub 3 NO. 12 Ring Toothed Synchro Flange 6 NO. 13 Flange 1 NO. 14 Piston 12 NO. 15 Spring 12 NO. 16 Ext.Cross Control 1 NO. 17 Cover 1 NO. 18 Ring Lock 1 NO. 19 Smooth Bush ( /282) 2 NO. 20 Side Cover 1 NO. 21 Selector Block Assy. 1 NO. 22 Control int. Shaft 1 NO. 23 Pin Sub-Assy 1 NO. 24 Spring Lock Washer 1 NO. 25 Bearing Sleeve ( ) 1 NO. 26 Shoulder Screw with Flange 40 NO. 27 Threaded Plug 1 NO. C202

203 28 Magnetic Plut 1 NO. 29 Synchro Ring 5 NO. 30 Fork 3 NO. 31 Taper Roller Bearing ( ) 2 NO. 32 Four conrct ball bearing ( ) 1 NO. 33 Needle Roller Bearing ( ) 1 NO. 34 Roller Bearing ( ) 1 NO. 35 Roller Bearing ( ) 1 NO. 36 Roller Bearing ( ) 2 NO. 37 Four Contact Ball Bearing ( / ) 1 NO. 38 Roller Bearing ( ) 1 NO. 39 Seal for Rotary Shaft 2 NO. 40 Aluminium front/ rear Gear Box Casing C. CHASSIS COMPONENTS 2 NO. 41 Telescopic Gearshift 1 NO. 42 Wheel Bearing Inner Front Axle (25590/25520) 43 Wheel Bearing Outer Rear Axle (3982/3920) 44 Wheel Bearing Inner Rear Axle (F ) 2 NO. 2 NO. 2 NO. 45 Insulator Rubber 2 NO. 46 Mounting Frame Side Member Insulator 2 NO. 47 CAB Mounting Bush Rear 2 NO. 48 CAB Mounting Bush Front 2 NO. 49 Spherical Bearing Assembly( ) 50 Centre Bearing - Propellor Shaft (F ) 1 NO. 1 NO. 51 Tank Radiator 1 NO. 52 S A W Brake Components 1 SET 53 Differential Bearings (44143/44348) 54 Differential Bearing (HM /803146) 1 NO. 1 NO. 55 Differential Bearing (1228-C-55) 1 NO. 56 Differential Bearing (JM /3994) 2 NO. 57 Disc Wheel Compone 7 NO. 58 Exhaust Brake 1 NO. D. ENGINE COMPONENTS 59 Front Oil Seal 1 NO. 60 Rear Oil Seal 1 NO. 61 Pulley Bearing 1 NO. C203

204 62 Thrust Washer 4 NO. 63 Circlip 8 NO. 64 Timing Gear Cover 1 NO. 65 Con-Rod Half Bearing 8 NO. 66 Bush 4 NO. 67 Damper Flywheel 1 NO. 68 Fan Hub 1 NO. 69 Oil Pump Complete 1 NO. 70 Timing Gears : Inj. Pump 1 NO. 71 Timing Gears : Power Steering 1 NO. 72 Exh. Mamifold 1 NO. 73 Sump (Oil Pan) (Heat Exch.) 1 NO. 74 CS Bearing 10 Nos. 75 Rocker Shaft 1 NO. 76 Conrod 4 NO. 77 Timing Gear Covers 1 NO. 78 Piston assy (with Rings) 4 NO. 79 Crankcase (with Liner & Brg. Caps) C204 1 NO. 80 Cylinder Head 1 NO. 81 Water Pump 1 NO. 82 Timing Gears : Idler 1 NO. 83 Timing Gears : Cam 1 NO. 84 Cyl. Head Cover 1 NO. 85 Pipe Assembly 1 NO. 86 Inter Bush 1 NO. 87 Thermostat 1 NO. 88 Injectors 4 NO. 89 Injector Pipe Assy 4 NO. 90 Bolt with Washer 2 NO. 91 Exh. Manifold Bolt 2 NO. 92 Crankshaft Complet 1 NO. 93 Cyl. Head Gasket 1 NO. 94 Valve Cone 16 NO. 95 Valve Collar Upper 8 NO. 96 Integral Shaft Bearing 1 NO. 97 Tappet 8 NO. 98 Inj Pump Drive Couping 1 NO. 99 Pump Control Bush 1 NO. 100 Rocker Lever 8 NO. 101 Tappet Adj Screw 8 NO. 102 Washer 4 NO. 103 Cam Shaft 1 NO.

205 C1060 C1061 C1062 Lined Shoe Assembly for Automobiles Machined trailor ball/hitch pin/linkage pin Commercial Vehicles of GVW above 7.5 MT and upto 16.5 MT in CBU/CKD/SKD condition 104 Rotary Fuel Pump Components 1 SET C205 E. DAY CAB TRIM COMPONENTS : 105 Fasteners - Cab Trim (49 Items) 1 SET 106 Hook Assy Cab Lock 2 NO. 107 Lock Assy Cab Safety 1 NO. 108 Door Lock Set 1 NO. 1 No. 1 Hot Rolled Steel Sheet Pickled and Oiled - 4 mm 2 Hot Rolled Steel Plates Pickled & Oiled mm 1.05 kg/kg content in kg/kg content in. 3 Relevant Lining Net to net. 4 Shoe Dip 10 gms 5 Bonding Ahesive 10 gms 6 Trichloroethylene 100 gms 1Kg. 1 Non-Alloy Steel Round/ Billets kg 1 No. RAW MATERIAL 1 Hot Rolled Steel Plates kgs 2 Thermo-plastic Tubing (Nylon) Meters 3 Terne Coated Steel Coils kgs 4 Cold Rolled Steel Sheets kgs COMPONENTS 5 Toothed Wheel (Gear) 8 No. 6 Shaft 4 No. 7 Shim 1 No. 8 Front Cover 1 No. 9 Adjustment Ring 1 No. 10 Sliding Sleeve 3 No. 11 Fixed Hub 3 No. 12 Ring Toothed Synchro Flange 6 No. 13 Flange 1 No. 14 Piston 12 No. 15 Spring 12 No. 16 Ext.Cross Control 1 No. 17 Cover 1 No. 18 Ring Lock 1 No. 19 Side Cover 1 No. 20 Pin Sub-Assy 1 No. 21 Spring Lock Washer 1 No. 22 Shoulder Screw with Flange 40 No. 23 Threaded Plug 1 No. 24 Magnetic Plug 1 No. 25 Aluminium Front/Rear Gear Box 2 No.

206 C206 Casing 26 Selector Block Assy 1 No. 27 Control Int.Shaft 1 No. 28 Smooth Bush 4 No. 29 Bearing Sleeve ( ) 1 No. 30 Synchro Ring 5 No. 31 F O R K 3 No. 32 Taper Roller Bearing ( ) 2 No. 33 Four Contact Ball Bearing ( ) 1 No. 34 Needle Roller Bearing ( ) 1 No. 35 Roller Bearing ( ) 1 No. 36 Roller Bearing ( ) 1 No. 37 Roller Bearing ( ) 2 No. 38 Four Contact Ball Bearing ( / ) 1 No. 39 Roller Bearing ( ) 1 No. 40 Seal for Rotary Shaft 3 No. 41 Telescopic Gearshift 1 No. 42 Exhaust Brake 1 No. 43 Steering Column Bearing (SKL- F ) 44 Clutch Release Bearing (K ) 2 No. 1 No. 45 Housing PVC 1 No. 46 Insulator Rubber 2 No. 47 Mounting Frame Side Member Insulator 48 Spherical Bearing Assembly ( No. 1 No. 49 Cargo - Badge 1 No. 50 Nozzle Windscreen Washer 2 No. 51 Tank Radiator 1 No. 52 Wheel Bearing Inner Front Axle (39581/39520) 53 Wheel Bearing Inner Front Axle (3585/3525) 54 Wheel Bearing Inner Rear Axle (42687/42620) 55 Centre Bearing - Propellor Shaft (F ) 2 No. 2 No. 2 No. 1 No. 56 S A W Brake Components 1 Set 57 Differential 1 No. 58 Differential Bearings (34478/34306) 59 Differential Bearings (HM804810/846) 60 Differential Bearings (55437/55200C) 1 No. 1 No. 1 No.

207 61 Differential Bearings (1228-H- 580) C207 1 No. 62 Disc Wheel Components 7 No. 63 Oil Pump Complete 1 No. 64 Timing Gear Case 1 No. 65 Inj Pump Drive Coupling 1 No. 66 Pump Control Bush 1 No. 67 Rocker Lever 8 No. 68 Cam Shaft 1 No. 69 Water Pump 1 No. 70 Relief Valve 1 No. 71 Tappet 8 No. 72 Crankshaft 1 No. 73 Piston Set 4 No. 74 Exhaust Valve 4 No. 75 PC Nozzle Assy 4 No. 76 Fan with Bush 1 No. 77 Exh.Manifold 1 No. 78 Fan Hub 1 No. 79 Intrcooler Comp. 1 No. 80 Cartridge Filter 1 No. 81 S U M P 1 No. 82 Crkcse-Comp.Assy 1 No. 83 Cyl.Head-Com.Asy 1 No. 84 F I P 1 No. 85 Connection Sleeve 1 No. 86 Sleeve 1 No. 87 Taper Plug 2 No. 88 Plug 2 No. 89 Valve Cone 16 No. 90 RR Oil Seal 1 No. 91 Circlip 1 No. 92 Damper 1 No. 93 Ex Manifold Bolt 12 No. 94 Cyl.Hd Gskt [Thin] 1 No. 95 Water Pump Seal 1 No. 96 Filter Gasket 1 No. 97 Valve Collr Upr 8 No. 98 Front Oil Seal 1 No. 99 Int Shaft Brg 1 No. 100 Control Valve 1 No. 101 Ring Split Circlip 1 No. 102 `O' Ring Gasket 2 No.

208 103 Ring Alignment 1 No. 104 Ring Power Steering 1 No. 105 Hub for Control Joint 1 No. 106 Line Pipe Socket 2 No. 107 Flow Cntrl Vlve 1 No. 108 Power Steering Pump 1 No. 109 Fasteners - Cab Trim (49 items) 1 Set 110 Hook Assy Cab Lock 2 No. 111 Lock Assy Cab Safety 1 No. 112 Door Lock Set 1 No Starter Motor 1 No. 114 CDS Steel Tubes for Injector Pipes C Mtrs. 115 Oil Pipe Support 1 No. 116 Gasket 1 No. 117 Grooved Stud 1 No. 118 Pressure Piece 6 Nos. 119 Element Cigar Lighter 1 No. 120 Ring Cigar Lighter 1 No. 121 Base Cigar Lighter 1 No. 122 Ash Tray (F ) 1 No. 123 Glove Box Lid 1 No. 124 Handle Assist RH 1 No. 125 Handle Assist LH 1 No. 126 Lever with Bush & Support 1 No. 127 Lead kg. 128 GM Separators 110 Nos. 129 Antimony kg. 130 Polypropeiene 1.79 kg. 131 Polymethyle Methacrylite Moulding Powder-Red 132 Polymethyle Methacrylite Moulding Powder-Amber kg kg. 133 Torsion Bar 1 No. 134 Poppet 1 No. 135 BallReturn Guide LH 2 Nos. 136 Roller Bearings/Shaft 2 Nos. 137 Thrust Washer 2 Nos. 138 Seal Nut 3/8" 1 No. 139 Seal Nut 5/8" 1 No. 140 Slip Seal V/Hsg 1 No. 141 Needle Roller 2 Nos. 142 Needle Thrust Bearing 1 No. 143 Seal Ring 2 Nos.

209 144 Seal Ring Valve 1 No. 145 Seal Valve Hsg (Dirt Seal) 1 No. 146 O Ring 2 Nos. 147 O Ring Valve 2 Nos. 148 O Ring V/Hsg Slipper Seal 1 No. 149 O Ring R Piston 1 No. 150 O Ring V/Hsg 1 No. 151 Special Bolt 9/16" 6 Nos. 152 Seal Ring S/Shaft 1 No. 153 Seal Ring R/P 1 No. 154 Seal Ring S/Shaft Hsg 1 No. 155 Backup Washer 1 No. 156 Gasket S/Cover 1 No. 157 Retaining Ring (INT) 2 Nos. 158 Trunion Seal 1 No. 159 Seal S/Cover 1 No. 160 Back Up Washer S/Shaft 1 No. 161 Molecular Sleeve (Desiccant) 1.4 kg. 162 Flexible Arm 1 No. 163 Compressor Wheel MDC 1 No. 164 Hollow screw 2 Nos. 165 Gasket Ring 2 Nos. 166 Socket Head Bolt 3 Nos. 167 Segment TS 3 Nos. 168 Boost Pressure Pipe 1 No. 169 Control Valve 1 No. 170 Heat Shield 1 No. 171 Turbine Wheel Assy 1 No. 172 Flinger Sleeve 1 No. 173 Steel O Ring 1 No. 174 Segment CS 3 Nos. 175 Bolt Hex 6 Nos. 176 Journal 2 Nos 177 Snap Ring 4 Nos. 178 Piston Ring 3 Nos. 179 Thrust Ring 1 No. 180 Thrust Plate 1 No. 181 Oil Deflector 1 No. 182 Plastic O Ring 1 No. 183 Socket Head Bolt 4 Nos. 184 Washer 4 Nos. 185 Shaft Nut 1 No. C209

210 C1063 Nitrile Rubber Oil Seal 186 Rubber Sleeves 1 No. 187 Copper Was Mix kg 188 Styrene Butadiene Rubber kg 189 Styrene Butadiene Rubber kg 190 Tyre Cord Fabric 25/ kg 191 Rubber Chemical 0.25 kg 192 Polyvinyl Butyral Sheets Msqr. 193 Green Float Glass Msqr. 1 kg 1 Raw material: a) MS CRCA Sheet/Strips/Coils including Seconds/Defectives but excluding Coated. C Kg/Kg content in. b) Nitrile Rubber compound 1.10 Kg/kg content in. (Composition of the Nitrile Rubber Compound per Kg. : a) Nitrile Rubber 0.47 Kg b) S.B.R Kg c) Carbon Black 0.40 Kg d) Misc. Chemicals and Rubber Chemicals: Zinc Oxide, Stearic Acid, Antioxidants, Accelerator, Plasticizer, Process Aids, Sulphur, Bonding Agent and Processing Oil) Note : 1. Rubber Chemicals should not exceed 0.02 kg of total chemicals. C1064 Nozzle of Fuel Injection Equipment 1 kg 1 Alloy Steel Bars/Coils Type 18 CR N 18/SAE 3415/16 mm MM CR 5/ Equivalent 2 Alloy Steel Bars/Coils Type AISI M2/Equivalent 3 Misc. items: Gun Drill, Micro Drill, Spirol Drill, Grinding Wheel(with or without frame work), Lapping Compound, Letter/Number Inscription Punch and Honning Tools 0.07 Kg 2.36 Kg 0.35 Kg Up to 3% of FOB value of export C1065 Nozzles 1 kg 1 Non- Alloy/ Alloy Steel rounds 1.35 kg/kg content in. C1066 Oil Bath Gear case 1 kg 1 MS Sheets kg C1067 Passenger car (of specifications as per details given in the note below the norms) 1 No. 1 EDD/DD CRCA Steel coil/sheets kgs 2 DD HR Steel coils/ sheets kgs 3 Terne coated sheets 9.5 kgs 4 Adhesive sealants V.O. Grey kg sealer 5 Adhesive sealants glass sealer 0.05 Kg 6 Cold drawn section kg 7 Double raw ball bearing SKF 1 No. No.4303 ANR TN9 8 Fuel Filter 1 No. 9 Carburettor 1 No.

211 10 Clutch Release Brg. KOYO No.RCT S 11 Prop. shaft bearing SKF No C211 1 No. 1 No. 12 Cover Assy. Clutch 1 No. 13 Clutch Disc. Assy. 1 No. 14 High Tension Cable Assy. 6 No. 15 Brg. - Needle Counter Nissan No G Brg. - Needle Main Nissan No Brg. - Needle Main Nissan No Brg. - Pilot Main Nissan No Brg. - Ball Main Nissan No G No. 1 No. 2 No. 1 No. 1 No. 20 Rod Fork 1 & 2 1 No. 21 Fork Shift 1 No. 22 Fork Shift Reverse 1 No. 23 Rod Fork 3 & 4 1 No. 24 Lever Striking 1 No. 25 Head Lamp 2 No. 26 Front Director Indicator Lamp 2 No. 27 Tain Lamp (with double filament) 2 No. 28 Tail Lamp (with single filament) 2 No. 29 No. Plate Lamp 2 No. 30 Rev. Warning Lamp 2 No. 31 Roof Lamp 1 No. 32 Foot Lamp 2 No. 33 Side Indicator Lamp 2 No Point Static Safety Seat Belts 1 Set 35 Radial Tyre & Tubes 5 Nos. on net to net basis. 36 AM/FM Radio cum cassette player with manual antenna These 2 inputs will be allowed on relevance 37 Air-conditioner kits On net to net basis for those cars which are having 1 or 2 of these inputs. Note: Export product having the following specifications:1) Engine: a) Cylinders(in line)-4 b) Cylinder capacity - More than 1000 & upto 1100 CC. c) Engine torque kg./3000 rpm d) Bhp - 41 hp/4800 rpm e) compression ratio -7.0:1 f) Radiator frontal area sq.m. g) Radiator fan - 4 blades ii) Technical Data:

212 h) Maximum weight kg. i) Length mm j) Width mm k) Height mm l) Boot capacity cu.m. m) Fuel tankcapacity - 38 lit. n) 4 speed gear box - Floor shift gear lever o) (4 forward + 1 rev) - Fully syncro forward speeds p) Brakes - Drum brakes on all 4 wheels q) Tyres - Opt.155 SR 14 r) Front suspension - Upper & lower swingingarms, coil springs, double acting hydraulic shock absorbers & anti-roll bar s) Rear Suspension - Semi elliptical leaf springs, double acting hydraulic shock absorbers & anti-roll bar. C1068 Piston Pin/ Gudgeon Pin 1 kg 1 Non-Alloy/ Alloy Steel Round 1.25 kg C1069 Deleted. C1070 Polyacrylic Rubber Oil Seals 1 kg 1 Raw material: a) MS CRCA Sheet/Strips/Coils including Seconds/Defectives but excluding Coated. C Kg/Kg content in. b) Polyacrylic Rubber Compound 1.10 Kg/kg content in. 2 Composition of the Compound per Kg. : a) Polyacrylic Rubber 0.59 Kg 2 b) Carbon Black 0.33 Kg c) Misc. Chemicals and Rubber Chemicals: Zinc Oxide, Stearic Acid, Antioxidants, Accelerator, Plasticizer, Process Aids, Sulphur, Bonding Agent and Processing Oil Note : 1. Rubber Chemicals should not exceed 0.02 kg of total chemicals. C1071 Pump Oiler/Oil Cans/Grease Gun/Suction Gun 1 kg 1 CRCA Sheets/Defectives/Seconds 0.05 Kg 1.20 kg/kg of net content in the export product 2 MS Wire Rods 1.06 kg/kg of net content in the export product C1072 Push rod 1Kg. 1 Non-Alloy/Alloy Steel rounds 1.30 kg C1073 Radiator Cap 1 kg 1 MS CRCA sheet/ strips/ coils 1.12 kg including seconds/ defectives but excluding coated C1074 Radiator Cap 1 kg 1 Stainless Steel/Mild Steel Strips 1.35 kg/kg content in C1075 Rear Axle Assembly for LCV/HCV (Assembly/SKD) 2 Cover Cap,Spring Washer Spring, Main Valve, Large Gasket, Tubular Rivet, Retainer,Small Gasket protector River, Medium Gasket, Spring Vaccum Valve 1 kg 1 HR Steel Plates/Coils (8 mm to 15 mm) 2 Castings (Rough/Machined) 1.02 Nos./No. in 1.83 kg/kg of Content in the export proudct. On net to net basis. 2 Steel Scrap/Pig Iron 1.36 kg/kg of net content in the case of

213 C1076 Front/Rear Engine Auto Rickshaw in CKD/ SKD/CBU Condition (125 CC to 200 CC) 3 Forging (Rough/Machined) 3 Non-Alloy/Alloy Steel Bars/Rods/ Billets/Blooms/ Ingots 4 Relevant Bearings. Net to net. 5 Bolts/Nuts/Washers/ Shims/Spacers/Oil Seals/Gaskets 6 Misc. items and Cuttings Tools, Gear Cuttings Blades, Cutters, Taps, Chasers, Burnishing Tools/ Lapping Compound/Rust Preventives(to be specified)/lubricants (to be specified)/dyes/die Block, Die Steel/Electrods/Welding Wire/Welding Fluxes. 1 No. 1 Cold Rolled (Prime) Steel Sheets/Strips/Steel Sheets/Strips/Wide Coils 2 Hot Rolled (Prime) Steel Sheets/Strips/Wide Coils C213 rough castings kg/kg of net content in the case of machined castings. On net to net basis kg/kg of net content in the case of rough forgings 1.70 kg/kg of net content in the case of machined forgings Nos./No. of Fasteners in the. Upto 8% of FOB value of exports Kg/Kg content in 1.13 Kg/Kg content in 3 Aluminium Alloy Ingots 1.07 Kg/Kg content in 4 Seamless Steel Tubes 1.02 Kg/Kg content in 5 Super Enamelled/ Enamelled Copper Wire 1.01 Kg/Kg content in 6 Natural Rubber 1.05 Kg/Kg content in 7 Plywood 1.05 Sq.Mtr/Sq.Mtr content in the export product 8 Polyol 1.05 Kg/Kg content in 9 Isocynate 1.05 Kg/Kg content in 10 Butyl Rubber 1.05 Kg/Kg content in 11 Relevant Synthetic Rubber (NBR/SBR/PBR) 12 Carbon Black 0.40 Kg 13 Poly Vinyl Chloride (PVC) Granules 1.05 Kg/Kg content in 1.05 Kg/Kg content in 14 Polypropylene Granules 1.05 Kg/Kg content in 15 Paints 1% of FOB value 16 PVC/Artificial Leather Cloth 1.05 Sq.Mtr/Sq.Mtr content in the export product

214 17 Nylon Granules 1.05 Kg/Kg content in 18 Main Shaft Assembly Net to net 19 Crank Shaft Assembly Net to net 20 Relevant set of gears - 1 set each Net to net 21 Front Shock Absorber Net to net. 22 Rear Shock Absorber set Net to net. 23 Cylinder Block Net to net. 24 Carburettor Net to net. 25 Piston Assembly Net to net. 26 Relevant Set of Bearings 1 - Set Net to net. 27 Speedometer Net to net. 28 Control Cable Set Net to net. 29 Rear View Mirror Set Net to net. 30 Wiring Harness set Net to net. 31 Front Suspension Spring Net to net. 32 Rear Suspension Spring (1 Set = 2 Nos.) C214 Net to net. 33 High Tension Coil Net to net. 34 Solid State AC Flasher Assembly Net to net. 35 Auto Switches Set Net to net. 36 Rotor Net to net. 37 Starting Tube Net to net. 38 Automotive lights with bulbs -1 set. Net to net. 39 Clutch Bush Net to net. 40 Wheel Axle Assembly Net to net. 41 Magnet container assembly/rotor Net to net. 42 Lock Assembly Net to net. 43 Set of Gears Net to net. 44 Spark Plug Net to net. 45 Petrol Lock Complete Net to net. 46 Horn Net to net. 47 Tool Kit Complete Net to net. 48 Needle Bush (1 Set = 3 Nos.) Net to net. 49 Silicon Diode Assembly Net to net. 50 Battery Net to net. 51 Differential Assembly Net to net. 52 Pivot Pin Assembly Net to net. 53 Capacitor Net to net. 54 Starter Gear Net to net. 55 Front Brake Drum Assembly Net to net. 56 Wiper Motor Net to net. 57 Rear Wheel Axle Assembly Net to net.

215 58 Wiper Assembly Net to net. 59 Complete clutch control shaft Net to net. 60 Lever Sector Complete Net to net. 61 Spindle Net to net. 62 Slider and slider block Net to net. 63 Propeller Shaft Assembly Net to net. 64 Trailing Arm Assembly Right & Left (1 Set = 2 Nos.) Net to net. 65 Side Glass (1 Set = 2 Nos.) Net to net. 66 Manifold Net to net. 67 Coir (1 Set = 2 Nos.) Net to net. 68 Hydraulic Brake Assembly Net to net. 69 Windshield Net to net. 70 Starter Motor - 1 No. Net to net. 71 Cylinder Head Casting - 1 No. Net to net. 72 Flexible Coupling/ Flange - 2 Nos. Net to net. 73 Valve Set - 1 No. Net to net. 74 Hub (set of 2) - 1 Set Net to net. 75 Reverse Motion Shaft - 1 No. Net to net. 76 Set of rings -1 Set Net to net. 77 Set of Seals - 1 Set Net to net. 78 Cones - 2 Nos. Net to net. 79 Starting Ring Gear - 1 No. Net to net. 80 Rod Control Lever Sub-Assy- 1 No. 81 Lever Group for Max Controlling -1 No. Net to net. Net to net. 82 Regulating Lever Assly - 1 No. Net to net. 83 Lever GR Stop Control - 1 No. Net to net. 84 Spark Advance Regulator Assly - 1 No. Net to net. 85 Clutch Gears Cross - 1 No. Net to net. 86 Set of Spacers - 1 Set Net to net. 87 Valve for Piston cooling - 1 No. Net to net. 88 Screw - 1 No. Net to net. 89 Oil Plug Assly -1 No. Net to net. 90 Anti Vibration Mounts - 3 Nos. Net to net. 91 Cross -1 No. Net to net. 92 Catalytic Converter - 1 No. Net to net. 93 CNG Cylinder - 1 No. Net to net. 94 CNG/ LPG Kit (Excluding Cylinder) - 1 Set. Net to net. 95 Tyre (Set of 4 nos.)- 1 Set Net to net. 96 Crankcase - 1 No. Net to net. C215

216 C1077 C1078 C1079 C1080 C1081 Hose Assembly having different lengths Rocker Arm/ Rocker Shaft Roller for auto break shoe Rotor for Altemotor Above 100 CC and upto 175 CC Scooter in CKD/SKD/ CBU Condition 97 Crankcase cover - 1 No. Net to net. 98 Isolator Vibration - 3 No. Net to net. 99 Fan Cowl - 1 No. Net to net. 1 Mtr 1 Hydraulic Break Hose of relevant dia and material 1 kg 1 Steel Bar/Rods of Relevant Grade. 1.0 kg Content of Import Item 1 kg 1 Copper Electrolytic Grade Standard Wire/Bar/Rod 2 C.R. Steel Sheet Extra Deep Drawing Quality 0.8 mm to 1 mm thick C Meter/Meter content of export product 1.39 kg 1 Non-Alloy Steel Round/ Billets kg 3 Steel Rod Free Cutting ENIA/SAE 8620 or equivalent to 5 to 36 mm Dia 4 Solder Tin 60% to 80% Lead 40%-20% 5 Poloyester Sheet/Strip/Film 25 to 200 Micron Thick 1.21 kg/kg content in export 1.46 kg/kg content in export Value Limited to 1% of FOB value of exports 1.20 kg/kg content in export 1 No. 1 CRCA Steel Sheets/Strips/Coils kg/kg content in. 2 Terne/Zinc Coated Steel sheets/strips/coils 3 Hot Rolled Steel Sheets/Strips/Coils 4 Seamless Carbon/Alloy Steel Tubes Steering Column Assembly 1.20 kg/kg content in kg/kg content in kg/kg content in. 1 No. 5 Aluminium Alloy Ingots 1.10 kg/kg content in. 6 Super Enamelled/Enamelled Copper Wire 1.01 kg/kg content in. 7 Natural Rubber 1.05 kg/kg content in. 8 Polyol 1.05 kg/kg content in. 9 Isocyanate 1.05 kg/kg content in. 10 Butyl Rubber 1.05 kg/kg content in. 11 Relevant Synthetic Rubber (NBR/ PBR/ SBR) 1.05 kg/kg content in. 12 Carbon Black gm 13 Nylon Granules 1.05 kg/kg content in. 14 ABS Plastic Granules 1.05 kg/kg content in. 15 Polypropylene Granules 1.05 kg/kg content in. 16 Polyvinyl Chloride (PVC) 1.05 kg/kg content in

217 C217 Granules. 17 PVC/PU Leather Cloth 1.05 kg/kg content in. 18 Paints 1.20 Ltr. 19 Polycarbonate Moulding Powder gm 20 Primer 1.00 Ltr. 21 Clear Acrylic (Lacquer) 0.83 Ltr K Primer 0.40 Ltr. 23 Clear 1K/2K (Lacquer) 0.40 Ltr. 24 Desmodur-PA 50/Suprasec gm 25 Auto Lamps & Bulbs Net to net. 26 Auto Lubricating System (Mix Gear Asly.) Net to net. 27 Battery Net to net. 28 Bearing Set Net to net. 29 Belt Drive Net to net. 30 Brake Drums Net to net. 31 Brake Hose Asly. Net to net. 32 Brake Shoe Set Net to net. 33 Bush Net to net. 34 Carburetor Assembly Net to net. 35 Catalytic Converter Net to net. 36 Clutch Asly Net to net. 37 Control Cable Assembly Net to net. 38 Crankshaft Assembly Net to net. 39 Cross Net to net. 40 Cylinder Block Net to net. 41 Disc Brake & Caliper Asly. Net to net. 42 Drive/Mainshaft Assembly Net to net. 43 Electronic Components Net to net. (Thyristors,Terminals, Capacitor, Diodes, Traicm Resistors Scr. 44 Front/Rear Blinker Net to net. 45 Front Brake Lever Net to net. 46 Gasket Set Net to net. 47 Gear Shifter Asly Net to net. 48 Hand Grips Net to net. 49 Horn Net to net. 50 Ignition Coil Net to net. 51 Inner Movement Net to net. Assembly/Speedo meter Complete 52 Lock & Key Set Net to net. 53 Magneto Net to net. 54 Master Cyl Asly Net to net.

218 55 Mirrors Net to net. 56 Module for Buzzer Net to net. 57 Needle Bearing Set Net to net. 58 Petrol Cock Net to net. 59 Pin, Socket Double Lance Type Net to net. 60 Pinion with free Wheel Net to net. C1082 C1083 Semi Metallic Asbestos Disc Brake Pads 61 Piston Asly (Piston, Rings, Pin, Circlip) Net to net. 62 Regulator, Flasher, Beeper, Etc. Net to net. 63 Reinforcement Plate Net to net. 64 Selector Spider Net to net. 65 Set of Gears Net to net. 66 Set of Oil Seal Net to net. 67 Shaft for Free Wheel Net to net. 68 Shock Absorber Net to net. 69 Single Gear Control System Net to net. 70 Spark Plug Net to net. 71 Starter Motor Net to net. 72 Stickers and Labels Net to net. 73 Switches Net to net. 74 Tensioner Asly Net to net. 75 Tool Kit Net to net. 76 Tyres Net to net. 77 Valve Air Control Net to net. 78 Windshield Beading Net to net. 79 Wiring Harness Net to net. 80 Hot Dies Steel Blocks, High Speed Steel, Inserts, Cutting, Tools, Grinding Stones, Adhesives and Sealants, Steel Shots. 1 kg 1 Resin 0.17 kg 2 Asbestos Raw in different grades 0.20 kg 3 Other items namely Aluminium Powder, Brass Chips, Brass Powder, Nitrile Butile Rubber, Copper Powder, Bonding Adhesive 4 Misc. items: Grinding Wheels (Diamond/Abrasive), Electrometallic Slitting Saws, Carbide Tips, Mould Releasing Solution, Endless Emery Belts 1 M.S. Sheet/ Plate/ Angle/ Round/ Bar Shallow Well hand pump 1 No (Net wt with PVC riser main pump rod, well screen, Lower casing & upper of Pump - minimum 40.5 kgs) casing. 2 Pig Iron 0.3 kg Upto 5% of FOB value of export Not exceeding 5% of the FOB value of export Not exceeding 3% of the FOB value of export 10.7kg C218

219 3 Nitrile Rubber kg 4 Stainless Steel/ Special Steel Rounds C kg 5 Zinc 0.9 kg 6 PVC Resins kg 7 Stabilizer for PVC kg 8 Flow Promoter kg 9 Impact Modifier kg 10 Filler (Calcium Carbonate) kg 11 Colouring Pigments kg 12 Titanium Dioxide Kg 13 Cycle Hexamon/MIBK 0.78 Kg Note : 1. Quantity of different items in item No. 6 to 13 is for 29 Kgs of PVC Compound. In case of higher content of Plastics in the pumps, the weight of different items covered by these Sl. No. may be worked out on pro-rata basis. C1084 Silencer PGT Black BCP 1 kg. 1 CRCA Coil/ Sheet kg (Partially Black Painted 2 M.S. Wire Rod kg & Nickel Plated 3 M.S. Round kg C1085 C1086 C1087 Silicon Rubber Oil Seals Sintered Bronze Bushes & Parts 'SB' Grade Sintered Bronze Bushes and Parts `D' Grade 4 Nickel kg 1 kg 1 Raw material: a) MS CRCA Sheet/Strips/Coils including Seconds/Defectives but excluding Coated Kg/Kg content in. b) Silicon Rubber Compound 1.10 Kg/kg content in. 2 Composition of the Nitrile Rubber Compound per Kg. : a) Silicon rubber Kg b) Red Colour Pigment 0.01 Kg c) Orange Colour Pigment Kg d) Red Iron Oxide Kg e) Varpx Kg 1 Kg 1 Copper Mill Scale Min. 80% kg Copper in Natural State 1 Copper Powder 0.96 kg Electrolytic/Atomised 2 Tin Ingot Min. 98% Purity kg 2 Tin Powder kg 3 Solid Lubricant kg 4 Lubricating Oil kg 5 Misc. Items: Graphite Powder, Jig Grinnding Wheels and Honing Stones 1 Kg 1 Copper Mill Scale Min. 80% Copper in Natural State CIF value shall not exceed Rs per kg of product exported kg

220 C1088 C1089 C1090 C1091 Sintered Iron Bushes & Parts Category IC Sintered Iron Bushes & Parts Category ID Sintered Iron Bushes and Parts Category - IA Sintered Iron Bushes and Parts Category IB 1 Copper Powder Electrolytic/Atomised 2 Tin Ingot Min. 98% Purity C kg kg 2 Tin Powder kg 3 Solid Lubricant kg 4 Iron Powder Sponge/Atomised kg 5 Lubricating Oil kg 6 Misc. items: Jig Grinding Wheels and Honing Stones 1 Kg 1 Copper Mill Scale Min. 80% Copper in Natural State Value not to exceed Rs. 2.43/kg of exported product kg 1 Copper Electrolytic/Atomised kg 2 Iron Powder Sponge/Atomised kg 3 Solid Lubricant powder kg 4 Lubricating Oil kg 5 Misc. items: Ferro Phosphorous Powder/Manganese Sulphide Powder/Graphite Powder, Jig Grinnding Wheels and Honing Stones 1 Kg 1 Copper Mill Scale Min. 80% Copper in Natural State 1 Copper Powder Electrolytic/Atomised CIF value shall not exceed Rs per kg of product export kg kg 2 Iron Powder Sponge/Atomised kg 3 Solid Lubricant powder kg 4 Lubricating Oil kg 5 Misc. Items: Natural Graphite Powder /Tin Powder, Jig Grinnding Wheels and Honing Stones CIF value shall not exceed Rs per kg of product exported 1 Kg 1 Iron Powder Sponge/Atomised kg 2 Solid Lubricant powder kg 3 Lubricating Oil kg 4 Misc. items: Copper Mill Scale/Copper Powder/Ferro Phosphorous Powder/Manganese Sulphide Powder, Jig Grinnding Wheels and Honing Stones CIF value shall not exceed Rs per kg of product exported 1 Kg 1 Copper Mill Scale Min. 80% kg Copper in Natural State 1 Copper Powder kg Electrolytic/Atomised 2 Iron Powder Sponge/Atomised kg 3 Solid Lubricant powder kg 4 Lubricating Oil kg 5 Misc. items: Ferro Phosphorous/Manganese CIF value shall not exceed Rs per

221 C1092 Sleeve Shaft and Ball Joint Sulphide Powder/Natural Graphite Powder, Jig Grinnding Wheels and Honing Stones C1104 Stainless Steel Rear 1 kg 1 Stainless Steel Sheets/Coils 304 Grade 0.63 mm Thickness C221 kg of product exported 1Kg. 1 Non-Alloy Steel Round/ Billets 1.10 kg/kg content in. C1093 Slip Ring 1 No 1 Copper electrolytic grade 0.04 Kg standard wire/ bar/ rod C1094 Slip Stub Shaft 1.Kg. 1 Non-Alloy Steel Round/ Billets kg C1095 C1096 Solenoid Switch Preengaged type Solenoid Swtich Co-axial type 1 No 1 Copper electrolytic grade 0.42 Kg standard wire/ bar/ rod 2 CR Steel Sheet extra deep drawing 0.8 to 4 mm thick 0.9 Kg 3 Steel rod free cutting ENIA/SAE Kg 8620 or eqv mm dia 4 Solder Tin - 80% Lead - 20 % 0.02 Kg 5 Polyester sheet/strip/film 25 to 0.03 Kg 200 Micron thick 1 No 1 Copper electrolytic grade 0.1 Kg standard wire/ bar/ rod 2 CR Steel Sheet extra deep drawing 0.8 to 4 mm thick 0.25 Kg 3 Steel rod free cutting ENIA/SAE Kg 8620 or eqv mm dia 4 Solder Tin - 80 % Lead - 20 % 0.01 Kg 5 Polyester sheet/strip/film 25 to 0.02 Kg 200 Micron thick C1097 Spindles 1Kg. 1 Non-Alloy/ Alloy steel rounds 1.47 kg C1098 C1099 C1100 C1101 C1102 C1103 Spline Hub for Clutch Plates Spokes (Galvanised) Sprocket Sprocket with central axle Stainless Steel Front Centre Cap - (Automobile) 1 Set Comprising of: a)front Hub Cover - 2 No. b)retainer Rings - 1 No. c)hexagonal Caps - 16 Nos. Stainless Steel Front Wheel Cover (Automobile) 1 kg 1 Alloy Steel Bars 1.80 Kg/Kg content in 1Kg. 1 Medium Carbon steel wire rod/ MS wire rod kg/kg content in. 2 Zinc 0.05 kg/ kg wt of the spokes to be galvanised 1 kg. 1 CRCA Coil/ Sheet 1.43 kg 2 Nickel kg 1Kg. 1 M S Plate 1.80 kg/kg content in. 2 Non-Alloy Steel Round/ Billets kg/kg content in. 1 kg 1 Stainless Steel Sheets/Coils kg Grade 0.63 mm Thickness 1 kg 1 Stainless Steel Sheets/Coils 304 Grade 0.63 mm Thickness kg kg

222 C1105 C1106 C1107 C1108 C1109 C1110 Centre Cap - (Automobile) 1 Set comprising of: a)rear Hub Cover -2 No. b)retainer Rings -2 No. c)hexagonal Caps -16 No. Stainless Steel Rear Wheel Cover (Automobile) Starter Motor Armature for Low Speed Vehicles Starter motor with maximum current 1100 Amps Starter motor with maximum current 800 Amps Stator for alternator for Light Duty (12 Volts Amps) Submersible Water pump sets comprising of Pumps, Motors, Pumpsets & Accessories thereof such as cable, control panels & pipes (Capacity from 30 to 90 1 kg 1 Stainless Steel Sheets/Coils 304 Grade 0.63 mm Thickness C kg 1 No 1 Copper electrolytic grade 0.8 Kg standard wire/ bar/ rod 2 CR Steel Sheet extra deep drawing 0.5 to 1 mm thick 3.5 Kg 3 Steel rod free cutting ENIA/SAE- 1.5 Kg 8620 or eqv mm dia 4 Solder Tin - 80 % Lead - 20 % 0.02 Kg 5 Polyester sheet/strip/film 25 to 0.04 Kg 200 Micron thick 1 No 1 Copper electrolytic grade 3.3 Kg standard wire/ bar/ rod 2 CR Steel Sheet extra deep drawing 0.8 to 10 mm thick 13 Kg 3 Steel rod free cutting ENIA/SAE- 2.1 Kg 8620 or eqv mm dia 4 Solder Tin - 80 % Lead - 20 % 0.03 Kg RC 16 SWG 5 Carbon brush 4 Nos 6 Polyester sheet/strip/film 25 to 0.06 Kg 200 Micron thick 1 No 1 Copper electrolytic grade 2.5 Kg standard wire/ bar/ rod 2 CR Steel Sheet extra deep drawing 0.8 to 10 mm thick 10 Kg 3 Steel rod free cutting ENIA/SAE- 2.1 Kg 8620 or eqv mm dia 4 Solder Tin - 80 % Lead - 20 % 0.03 Kg RC 16 SWG 5 Carbon brush 4 Nos 6 Polyester sheet/strip/film 25 to 0.06 Kg 200 Micron thick 1 No 1 Copper electrolytic grade 0.44 Kg standard wire/ bar/ rod 2 CR Steel Sheet extra deep 2 Kg drawing 0.8 to 1 mm thick 3 Solder Tin - 80% Lead - 20 % Kg 4 Polyester sheet/strip/film 25 to 0.02 Kg 200 Micron thick 1 set 1 Copper Rod/Winding Wire or 28.5 Kgs Copper Wire Bar 2 Bronze Metal 9.3 Kgs 3 CI Castings 51.6 Kgs 3 Pig Iron 67.1 Kg 4 Stampings 88 Kg

223 C1111 C1112 C1113 C1114 C1115 HP) (Minimum export product weight not less than Kgs.) Submersible water pump sets comprising of Pumps, Motors, Pumpsets & Accessories thereof such as cable, control panels & pipes (capacity from 7.5 to 30 HP) (Minimum export product weight not less than 99.5 Kgs.) Submersible Water Pumps Set comprising of Motors, Pumpsets & Accessories thereof such as cable, control penals & pipes (capacity upto 7.5 HP) Thinwalled Engine Bearing Bushings and Thrust Washers in Steel backed Lead based white Metal Alloy GL-14/ SAE- 14 Thinwalled Engine Bearings Bushings and Thrust Washers in Steel Backed Aluminium Tin Alloy GA-17G/A-17X Thinwalled Engine Bearings Bushigs and Thrust Washers in Steel C223 4 CRNGO Steel Sheet/Coil/Strips 157 Kg 5 ERWSS Tube/Rods-Grade AISI 60 Kgs. 304/316/431 6 Relevant Rubber/Plastic Parts Net to Net 1 set 1 Cooper Rod/Winding Wire or 14.4 Kgs Cooper Wire Bar 2 Bronze Metal 4.5 Kgs 3 CI Castings or Pig Iron 31.6 Kgs Kg. 4 Stamping or CRNGO Steel Sheet/Coil/Strips 28 Kgs. 50 Kgs 5 ERWSS Tube/Rods - Grade AISI 21.0 Kgs. 304/316/431 6 Relevant Rubber/Plastics Parts Net to Net 1 Set. 1 Copper Rod/Winding wire 5.1 Kg Copper Wire Bar 2 Bronze Metal 1.5 Kg 3 Pig Iron 34 Kg 4 CRNGO Steel Sheet/Coil/Strip 31 Kg 5 ERWSS Tube/Rods Grade AISI 14 Kg 304/316/431 6 Rubber/Plastic Parts Net to Net 6 a) Synthetic Rubber 1.05 Kg/Kg content in export b) LDPE Moulding Powder 1.05 Kg/Kg content in export c) HDPE Moulding Powder 1.05 Kg/Kg content in export d) PP Moulding Powder 1.05 Kg/Kg content in export e) ABS Moulding Powder 1.05 Kg/Kg content in export 100 kgs 1 CR Steel Strips kgs. 2 Lead kgs. 3 Tin Ingots/Scraps 6.33 kgs. 4 Antimony Ingots/Scraps 9.50 kgs. 100 kgs 1 CR Steel Strips 114 kgs. 2 Copper Wire Bars/ Cathodes/ 0.15 kg. Ingots/ Rods/ Scrap 3 Lead 0.40 kg 4 Tin Ingots/Scraps 2.59 kg. 5 Aluminium kgs. Ingots/Sheets/Foils/Scraps 6 Antimony Ingots/Scraps 0.07 kg. 7 Silicon 0.54 kg. 100 kgs 1 Steel backed Copper-Lead Strips generally conforming to KS- 30/F-14/SAE-48/SL kgs.

224 C1116 C1117 C1118 C1119 C1120 C1121 C1122 backed Copper based Alloy GS-30/KS-30/ F- 14/SAE-48/SL Thinwalled Engine Bearings Bushings and Thrust Washers in Steel backed Lead based white Metal Alloy GL-15/ F- 23/L-200/G-24/SAE-15 Thinwalled Engine Bearings Bushings and Thrust Washers in Steel backed Copper based Alloy GS- 10/LS-10/ G- 46/SAE-797/SY/F-100/F- 59 Thinwalled Engine Bearings Bushings and Thrust Washers in Steel backed Copper Lead Alloy of GS- 23 /LS-23/G- 48/SAE-799/SX/F-250/F-7 Thinwalled Engine Bearings Bushings and Thrust Washers in Steel backed Copper based Tin Alloy GS-25/KS-25/SAE- 49/SP Thinwalled Engine Bearings, Bushing and Thrust washers in Steel backed Copper based Alloy F- 770/SL/KS30/GS30/F-14 Thinwalled Engine Bearings, Bushing and Thrust Washers in Steel Backed Copper base Alloy SL/KS 30/GS 30/F- 14/SAE 48/SP/ KS 25/GS 25/G 41/F /H 24/F 112/SAE 49/SY/F 100/HF 2/LS 10/GS 10/G 46/SAE 797/SX/F 250/HF 16 H 116/LS 23/GS 23/G 48/SAE 799 Thinwalled Engine Bearings, Bushing and Thrust Washers in Steel Backed Aluminium Base Alloy F-820/ or F- 157/TR-20/GA 20/A 20/G 74/SAE 783/AS 15/GA 100 kgs 1 CR Steel Strips kgs. 2 Lead kgs. 3 Tin Ingots/Scraps 0.56 kg. 4 Antimony Ingots/Scraps 8.15 kgs. 100 kgs 1 Steel backed Copper-Lead Strips generally conforming to LS- 10/G-46/SAE-797/SY/F-100/F kgs 1 Steel backed Copper-Lead Strips generally conforming to LS- 23/G-48/SAE-799/SX/F-250/F kgs 1 Steel backed Copper-Lead Strips generally conforming to KS- 25/SAE-49/SP kgs kgs kgs. 100 kgs 1 C.R. Steel Strips kg 2 Copper Wire kgs Bars/Cathodes/Ingots/Rods/Scrap 3 Lead kgs 4 Tin Ingots/Scraps 0.20 kgs 100 kgs 1 C.R. Steel Strip kgs 2 Copper Lead Alloy Atomised Powder Generally conforming to SL/KS 30/GS 30/F-14/SAE 48/SP/KS 25/GS 25/G 41/F /H 24/F 112/SAE 49/SY/F 100/HF 2/LS 10/GS 10/G 46/SAE 797/SX/F 250/HF 16 or H 116/LS 23/GS 23/G48/SAE kgs 100 kgs 1 C.R. Steel Strip kgs 2 Aluminium Tin Based Clad Alloy to F-820/or F-157/TR- 20/GA 20/A 20/G 74/SAE 783/AS 15/GA 17G/A 17X/A 6/GA 6/A 300/G 73/SAE kgs C224

225 C1123 C1124 C1125 C1126 C1127 C1128 C1129 C G/A 17X/A 6/GA 6/A 300/G 73/SAE Thinwalled Engine Bearings, Bushing and Thrust Washers in Steel Backed Aluminium Tin Base Alloy GA 6/ A 6/G 73/A 300/ SAE 770/AS 11 Thinwalled Engine Bearings, Bushings and thrust Washers in Steel backed Copper based High Tin Alloy F- 780/SP/H24/GS25/KS25/ G-41/SAE-49 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Copper based Alloy F- 100/SY/HF2/LS10/GS10/ Glyco-46/SAE-792 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Copper based Alloy F-250/SX/HF 16 H 116/LS-23/GS- 23/Glyco-48/SAE-799 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Aluminium Based Alloy AS-15/F-820/F- 157/GA-20/A-20/G- 74/TR-20/SAE-783 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Aluminium Based Alloy AS-11/GA-6/A-6/G- 73/A-300/SAE-770 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Tin Based White Metal Alloy L-2/GL- 12/W-90/G-32/B- 100/SAE-12 Thinwalled engine 100 kgs 1 Steel Backed Aluminium Tin Bimetal Strips to GA 6/A 6/G 73/A 300/SAE 770/AS kgs 100 kgs 1 C.R. Steel Strips kg 2 Copper Wire kgs Bars/Cathodes/Ingots/Rods/Scrap 3 Lead kgs 4 Tin Ingots/Scraps 0.77 kgs 100 kgs 1 C.R. Steel Strips kg 2 Copper Wire kgs Bars/Cathodes/Ingots/Rods/Scrap 3 Lead 4.98 kgs 4 Tin Ingots/Scraps 4.98 kgs 100 kgs 1 C.R. Steel Strips kg 2 Copper Wire kgs Bars/Cathodes/Ingots/Rods/Scrap 3 Lead kgs 4 Tin Ingots/Scraps 1.97 kgs 100 kgs 1 C.R. Steel Strips kg 2 Copper Wire 0.23 kgs Bars/Cathodes/Ingots/Rods/Scrap 3 Tin Ingots/Scraps 4.50 kgs 4 Aluminium Ingots/Sheets/ Foils/Scraps kgs 100 kgs 1 C.R. Steel Strips kg 2 Copper Wire Bars/ Cathodes/ 0.20 kgs Ingots/ Rods/ Scrap 3 Tin Ingots/Scraps 1.20 kgs 4 Aluminium Ingots/ kgs Sheets/Foils/Scraps 5 Nickel Bars & Rods 0.20 kgs 100 kgs 1 C.R. Steel Strips kg 2 Copper Wire 1.73 kgs Bars/Cathodes/Ingots/ Rods/Scrap 3 Tin Ingots/Scraps kgs 4 Antimony Ingots/Scraps 3.95 kgs 100 kgs 1 C.R. Steel Strips kg Bearings, Bushings and 2 Lead kgs C225

226 C1131 C1132 C1133 C1134 C1135 C1136 C1137 thrust washers in Steel backed Lead Based White Metal Alloy GM- 155/GL-13/L-100/F- 99/SAE-13 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Aluminium Tin Alloy F-820 or F-157/TR- 20/GA-20/A-20/G- 74/SAE-783/AS-15/GA- 17G/A-17X Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Aluminium Tin Alloy AL-6 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Aluminium Lead Alloy F-66/AL-6M Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Tin Based Babbit Alloy to F-1/GL-12/W- 90/G-38/B-100/SAE-12/L- 2 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Lead based Babbit Alloy to F-23/L 200/GL-13/L-100/F- 99/SAE-13/GM-155 Thinwalled engine Bearings, Bushings and thrust washers in Steel backed Cast Copper based Alloy to F-112/F- 77/F-770/G-41 Top Link Assembly for Tractors (consisting of Tommy Bar, Replacement Ball, Replacement End, Centre Tube and Locking Collar)-Galvanised 3 Tin Ingots/Scraps 3.26 kgs 4 Antimony Ingots/Scraps 5.44 kgs 100 kgs 1 Steel backed Aluminium Tin Strips to F-820 F-157/ TR- 20/GA-20/A-20/G-74/SAE- 783/AS-15/GA-17G/A-17X 100 kgs 1 Steel Backed Aluminium Tin Strips to AL kgs 1 Steel Backed Aluminium Lead Strips To F-66/AL-6M 100 kgs 1 Steel Backed Tin Based Babbit Alloy Strips to F-1/GL-12/W- 90/G-38/B-100/SAE-12/L kgs 1 Steel Backed Lead Based Babbit Alloy Strips to F-23/L 200/GL- 13/L-100/F-99/SAE-13/GM kgs 1 Steel backed Cast Copper Lead Strip to F-112/F-77/F-770/G-41 1 kg 1 For Tommy Bar: Non Alloy Steel Rounds/Bars/Rods 2 For Top Link Replacement End: Non Alloy Steel Rounds/Bars/Rods 3 For Replacement Ball: Non Alloy Steel Rounds/Bars/Rods 4 For Centre Tube: Seamless Non Alloy Steel Tubes kgs kgs kgs kgs kgs kgs 1.12 kg/kg content in 1.75 kg/kg content in 3 kg/kg content in the 1.12 kg/kg content in C226

227 C1138 C1139 C1140 Tractor Brake Assembly Tractor Parts - Ratchet Jack Assembly Unibody Compressors (Oil Injected Rotary Screw Compressors suitable to drive with V- Belts and Electric Motors, Oil Engine and any other suitable drive) 5 For Locking Collar: HR Sheets 1.25 kg/kg content in 6 Zinc for Electroplating kg/kg of Steel content in the export product 7 Misc Items: Die Steel, Cutting Tools, Taps & Drills, Lubricants 1 No. 1 HR Steel Sheet, HR Steel Plates, Bright Bar 2 Lining, Shoe Hold Downpin, Ancher Pin Steady Post HT Nuts Grommet Limited to 4% of FOB value of exports kg/kg content in. Net to net. 3 Spring Steel Wire 1 kg/kg content in. 4 Shoe Dip Bending Adhesive Trichloroethylene Upto 5% of FOB value of exports. 1 No. 1 Seamless Steel Tube 1.15 kg/kg content in. 2 Non-alloy steel Rounds 1.72 kg/kg content in. 3 H.R. Sheet 2.13 kg/kg content in. 4 Spring Wire 1.14 kg/kg content in. 5 CRCA Sheet 2.5 kg/kg content in. 6 Non Alloy Steel/Wire Rod 1.17 kg/kg content in. 7 Misc. Items: Die Steel, Cutting Tools, Drills, Grinding Wheels, Carbide Die, Reams, Machine Blades and Welding Wire Upto 5% of FOB value of export 100 Nos 1 Roller Bearings 200 Nos. 2 Taper Bearings/ Taper Roller 400 Nos. Bearings 3 SHIM 570 Nos. 4 Spring 200 Nos. 5 Glyd Ring (Teflon Ring) 100 Nos. 6 Valve MPCV 100 Nos. 7 Screw 100 Nos. 8 Cartridge 100 Nos. 9 Shaft Seal 100 Nos. 10 Sight Glass 100 Nos. 11 Black Ball 60 Nos. 12 Valve BD 100 Nos. 13 White Ball 42 Nos. 14 Separator Element 100 Nos. 15 Rotor Set 100 Nos. 16 Oil Filter Elbow 100 Nos. 17 Non Asbestos Gasket sheet of size 1/32, 1/64" and 1/16" kg C227

228 C1141 C1142 C1143 Universal Joint for Automobiles V-Belt Cover BcP Vaccum Potted Ignition Coil other than those covered by Sl. Nos & No 1 Needles Net to net 2 Seals 4 Nos 3 Plastic Inserts 4 Nos 1 kg. 1 CRCA Sheet/ Coils 1.40 kg 2 Nickel kg 1 No. 1 Case Moulding 1 No. 2 Screw Terminal 1 No. 3 Primary Bobbin 1 No. 4 Irradiation Cable (Black/Ziba) 0.1 Meter 5 Irradiation Cable (Black/White) 0.12 Meter 6 Male Terminal 1 No. 7 Terminal 1 No. 8 Sumi Tube 0.02 Meter 9 Rubber Tube 2 Nos. 10 Z. Sleeve 1 No. 11 Core Assembly 1 No. 12 Copper Wire 15 MEW(0.45 mm) 0.05 kg C1144 Valve Tappets 1Kg. 1 Non-Alloy/ Alloy Steel rounds 1.30 kg C1145 Voltage Regulator 1 No 1 CR Steel Sheet Extra deep 0.5 Kg drawing 2 Steel rod free cutting ENIA/SAE 0.1 Kg 8620 or equivalent 5-35mm dia 3 Solder, Tin - 80%, Lead - 20% Kg C1146 C1147 C1148 C1149 Wheel Pulley MB with ZP Lever(Lever plated with Zinc and wheel Pulley Painted) Aluminium Alloy Billet (6063) Aluminium Alloy Ingot (IM-2) Aluminium Forgings 4 Contact Point-tungsten 6 Nos 1 kg. 1 CRCA Coil/ Sheet kg 2 H.R. Coil/ Sheet kg 3 M.S. Round kg 4 M.S. Wire Rod kg 5 Zinc kg 1 MT 1 Magnesium 12.5 kgs 2 Silicon 4.7 kg 3 Caustic Soda (100% Basis) kgs 4 Calcined Petroleum Coke kgs 5 C.T. Pitch kgs 6 Aluminium Flouride 20.2 kgs 1 kg 1 Aluminium Scrap Kgs 2 Nickel coated (Unwrought) kgs 3 Silicon metal kgs 4 Zinc kgs 1 MT 1 Aluminium Ingots 1.10 MT 2 Misc. Items: Cutting Tool, Grinding Wheels, Furnace Oil, Anti- rust Oil C1150 Aluminium Ingots / 1 MT 1 Caustic Soda Lye (Containing minimum 47% Caustic soda with C228 Upto 4% of FOB value of export product kg

229 C1151 C1152 C1153 C1154 C1155 C1156 C1157 C1158 C1159 C1160 C1161 Aluminium Sow Ingots Deleted Aluminium Wire Bar/ Rod Antimonial Lead Alloy/Lead Calcium Alloy/Lead based Alloy (Minimum Lead content 98%) Deleted Deleted Deleted Deleted Bimetal Strips in Steel backed Copper based generally confor- ming to F 770/SP/ SAE 49/GS 25/KS 25/F 780/H 24/G 41/F 112 Bimetal Strips in Steel backed Copper based generally confor- ming to F 100/SY/ SAE 797/GS 10/LS 10/G 46/HF 2 Sodium content 164 kg.) Alumina Calcined 1920 kg 2 Pre-baked anode Raw material for pre baked anode kg a) Calcined Petroleum Coke 451 kg with 1% wastage b) Coal Tar Pitch 110 kg (inclusive of 1% wastage) 3 Aluminium Fluoride kg 4 Furnace Oil (for baking) 90 L 5 Non-coking Coal MT 1 MT 1 Caustic Soda Lye (containing min. 47% caustic soda) 2 Calcined Petroleum Coke (CP coke) kgs (Total Soda content 164 kgs) 0.46 MT 3 Coal Tar Pitch 0.11 MT 4 Aluminium Fluoride 20.7 kgs 1 MT 1 Lead BatteryPlates covered by ISRI Code word "Rails" MT 100 kgs 1 Steel Strips kgs 2 Copper Wire kgs Bars/Cathodes/Ingots/Rods/Scrap 3 Lead 7.96 kgs 4 Tin Ingots/Scraps 0.32 kg 100 kgs 1 Steel Strips kgs 2 Copper Wire kgs Bars/Cathodes/Ingots/Rods/Scrap 3 Lead 3.58 kgs 4 Tin Ingots/Scraps 3.58 kg Bimetal Strips in Steel 100 kgs 1 Steel Strips kgs backed Copper based 2 Copper generally confor- ming to Wire/Bars/Cathodes/Ingots/Rods/ kgs F 250/SX/ SAE 799/GS Scrap 23/KS 23/HF 16/H 116/ G 3 Lead 7.90 kgs 48 4 Tin Ingots/Scraps 1.28 kg Bimetal Strips in Steel 100 kgs 1 Steel Strips kgs backed Copper based 2 Copper Wire kgs C229

230 C1162 C1163 C1164 C1165 C1166 C1167 C1168 generally confor- ming to F 780 Bimetal Strips in Steel backed Copper based generally confor- ming to F 80/SAE 789 Bimetal Strips in Steel backed Copper based generally confor- ming to SL/SAE 48/ KS 30/GS 30/F 14 Bimetal Strips in Steel backed Copper based generally conforming to SY/SAE 797/SX/SAE 48/GS 10/LS 10/ F 100/G 46/HF 2/ GS 25/KS 25/F 112/G 41/H 24/F 770/F 780/GS 23/LS 23/ F250/ G 48/H 116/HF 16/GS 30/KS 30/F 14/SAE 799/SP/SAE 49/SL Brass Blanks (Discs)/ Brass case Blanks(Discs) for Defence application Brass extruded Hollow sections such as pipes/ tubes Brass extruded solid sections including Bars and Rods Brass Foil C230 Bars/Cathodes/Ingots/Rods/Scrap 3 Lead 7.71 kgs 4 Tin Ingots/Scraps 0.65 kg 100 kgs 1 Steel Strips kgs 2 Copper kg Wire/Bars/Cathodes/Ingots/Rods/ Scrap 3 Lead 3.20 kgs 4 Tin Ingots/Scraps 1.60 kg 100 kgs 1 Steel Strips kgs 2 Copper kgs Wire/Bars/Cathodes/Ingots/Rods/ Scrap 3 Lead 9.68 kgs 4 Tin Ingots/Scraps 0.32 kg 100 kgs 1 Steel Strips kgs 2 Copper Based Alloy Powder to SY/SAE 797/SX/SAE 48/GS 10/LS 10/F 100/G 46/HF 2/GS 25/KS 25/F 112/G 41/H 24/F 770/F 780/GS 23/KS 23//F 250/G 48/H 116/HF 16/GS 30/KS 30/F 14/SAE 799/SP/SAE 49/SL Kgs 1 Kg 1 Zinc 1.10 Kg. per kg. content in export product 2 Copper Wire bars/cathodes/ingots/rods 1 kg. 1 Brass scrap Brass Ingots/Billets. 1 kg 1 Brass scrap Brass Ingots/Billets. 1 kg 1 Copper Cathode/Ingots 1.10 Kg. per kg. content in export product 1.08 Kg 1.02 Kg kg 1.02Kg kg/kg content in 1 a) Copper Scrap kg/kg content in. 2 Zinc Ingot 1.05 kg/kg content in. C1169 Brass strips/ Sheets 1 kg 1 Brass Scrap 1.07 kg C1170 Brass Strips/Sheets 1 kg 1 Copper Wire Bar/Cathode/Ingot/Rod or Copper Scrap 1.05 kg/kg content in export 1.075Kg/Kg content in. 2 Zinc Ingots 1.05 kg/kg content in export C1171 Brass Washers of all 1 kg 1 Brass scrap kg

231 C1172 types Brass Wire 1 kg. 1 a) Copper Wire Bar/Cathode 1.05 kg/kg content in export b) Zing Ingot 1.05 kg/kg content in export Brass Scrap of relevant grade kg/kg content in export C1173 Brass Wood Screw 1 Kg. 1 Brass Scrap 1.10 Kg/Kg content of Brass in export product C1174 C1175 C1176 Calcined Alumina Condensor/ Evaporator Coils used as Heat exchangers for Airconditioning and Refrigerator purpose. Copper & Copper Alloy (including Brasses, Bronzes, Cupro Nickel, Nickel Silver) Extruded and Drawn Hollow Sections such as Pipes & Tubes. 1 MT 1 Caustic Soda lye (containing min. 47% Caustic Soda) 2 Furnace oil 246 kgs 3 Synthetic Flocculant 230 gms 4 Crystal growth modifier 262 gms 1 Kg 1 Copper tubes Refrigeration quality-dia 1/4" to 1/2" 2 Aluminium Fin Stock thickness 0.10 mm to 0.20 mm C kgs in lye form with 47% Caustic content (82 kgs on 100% basis) 1.01 kg/kg content in 1.02 kg/kg content in 3 Brazing materials Upto 0.5% of FOB value 4 U Bends and Tripods Net to Net 1 kg 1 Copper scrap 1 Copper Cathode/Copper Wire Bars Copper Billets 2 Alloying Elements viz. Zinc, Lead, Tin, Nickel, Aluminium etc. 3 Calcium Hexa Bromide/Calcium Bromide 4 Hot Die Steel 5 Lubricants 6 Tungsten Carbide Drawing Dies & Plugs 7 Refractory Ramming Mass CIF value of the above mentioned item No. 3 to 7 is limited to 1.5% of FOB value of export. C kg 1 Copper Scrap 1.07 kg Copper & Copper Alloy(including Brasses, Bronzes, Cupro Nickel, Nickel Silver) Extruded and Drawn Solid Sections Copper Cathodes/Copper Wire Bars 2 Alloying Element/s viz. Zinc, Lead, Tin, Nickel, Aluminium etc. 3 Calcium Hexa Bromide / Calcium Bromide 1.09 kg/kg content in 1.06 kg/kg content in 1.02 kg/kg content in 1.05 kg/kg content in 1.05 kg 1.05 kg CIF value limited to 1.5% of FOB value of export. 4 Hot Die Steel CIF value limited to 1.5% of FOB value of export.

232 C1178 C1179 C1180 C1181 C1182 C1183 C1184 C1185 C1186 Copper Based Prealloyed Powders to R- 100/PMB-20/SY/ HF2/LS10/GS10/ SAE- 797/G-46/KS940. Copper Based Prealloyed Powders to R- 250/PMB-21/SX/ H- 24/KS-25/GS-25/ SAE- 799 HF-16/ KS-23/GS- 23/G-48/ KS941-1 Copper Based Prealloyed Powders to R- 730/PMB-30/ SL/KS- 5 Lubricants CIF value limited to 1.5% of FOB value of export. 6 Tungsten Carbide Drawing Dies & Plugs C232 CIF value limited to 1.5% of FOB value of export. 7 Refractory Ramming Mass CIF value limited to 1.5% of FOB value of export. 100 kgs 1 Copper Wire kgs Bars/Cathodes/Ingots/Rods/Scrap 2 Lead kgs 3 Tin Ingots/Scraps kgs 100 kgs 1 Copper Wire kgs Bars/Cathodes/Ingots/Rods/Scrap 2 Lead kgs 3 Tin Ingots/Scraps kgs 100 kgs 1 Copper Wire kgs Bars/Cathodes/Ingots/Rods/Scrap 2 Lead kgs 30/GS-30/ SAE-48 3 Tin Ingots/Scraps kgs Copper Based Prealloyed Powders to R- 770/R-780/ PMB- 26/SP/H-24/ KS25/GS-25/ SAE-49/G-41 Copper Based Prealloyed Powders to SAE- 484/PMB kgs 1 Copper Wire kgs Bars/Cathodes/Ingots/Rods/Scrap 2 Lead kgs 3 Tin Ingots/Scraps kgs 100 kgs 1 Copper Wire kgs Bars/Cathodes/Ingots/Rods/Scrap 2 Lead kgs 3 Tin Ingots/Scraps kgs Copper Bonded 1 kg 1 MS Bright Bars kg Grounding Rods 2 Copper Bar Cathodes kg Copper extruded solid sections/copper Rods Copper Flats/ Sheets/ Strips Copper Foils 1 kg 1 Copper Cathode/ Ingot Copper Scrap 1 kg 1 Copper Wire Bar/ Copper Ingot/Copper Rod/Copper Cathode Copper Scrap 1 kg Copper Ingot/ Copper Cathode Copper Strip in Coil Copper Scrap 1.02 kg 1.08 Kg 1.02 kg 1.05 kg 1.02 kg 1.01 kg 1.05 kg C1187 Copper sleeves 1 kg 1 Copper Scrap kg C1188 Silver Bearing Copper 1 kg. 1 Copper Scrap Strip/ Sheets/ Foil Copper Wire Bar 1.06 kg/kg content in export 1.03 kg/kg content in export

233 C1189 C1190 C1191 C1192 C1193 C1194 Copper Wire Extruded Aluminium Products including pipes and tubes Finished machined Bronze castings Alloy Aluminium Bronze BS 1400-AB-1 (copper content 87% alum. content 10%, Iron content 3%) Finished machined Bronze castings Alloy Leaded Bronze BS AB2 (Coper content 80%, lead 10% and Tin 10%) Lead Antimony Wire 4.5mm Dia (Sb 1.5% Pb 98.5%) Lead Antimony wire 6.45mm dia ( Sb 10.5% Pb 89.5%( C1195 Lead Ingots 99.97% Purity/Antimonial Lead(Lead Antimony Alloy)/ Calcium Lead Alloy (Lead Calcium Alloy) C1196 Nickel Silver Strip for Defence, Electronics and telecommunication purposes C1197 Nickel Silver Wire 2 Silver Bullion of Purity 99.99% 1.02 kg/kg content in export 1 kg 1 Copper rods C233 Copper Ingots Copper Scrap 1.01 kg 1.02 kg 1.05 kg 1 kg 1 Aluminium Scrap 1.06 kg 1kg 1 Copper Scrap/ Copper Ingot kg 2 Aluminium kg 3 Iron kg 1 kg 1 Copper kg 2 Lead kg 3 Tin kg 1 kg 1 Lead kg 2 Antimony kg 1 kg 1 Lead kg 2 Antimony kg 1 Kg 1 Lead Scrap namely ISRI Radio, Racks, Relay, Ropes & Roses 1 Kg 1 Nickel Silver Scrap 1 a) Copper Wire Bar/ Cathode/ Ingot/ Rod Copper Scrap 1.06 kg/kg content in Kg/kg content in kg/kg content in 1.075Kg/Kg content in. b) Zinc Ingot kg/kg content in c) Nickel Cathode kg/kg content in 2 Zinc Ingots 1.05 Kg/kg content in 3 Nickel Cathode 1.05 Kg/kg content in 1 Kg 1 Copper Wire Bar/ Cathode/Ingot/Rod Copper Scrap 1.05 Kg/Kg content in export 1.075Kg/Kg content in. 2 Zinc Ingot 1.05 Kg/Kg content

234 C1198 C1199 Nickel Wire and /or Strip. Pen Part-Mouth piece made of Brass C234 in export 3 Nickel Cathode 1.05 Kg/Kg content in export 1 MT 1 Nickel Cathode and/or Nickel Pellet 1.03 MT 1 Kg. 1 Brass Scrap Kg C1200 Phosphor Bronze fabric 1 kg 1 Phosphor Bronze Wire Rod kg C Kg 1 Phosphor Bronze Scrap C1202 C1203 Phosphor Bronze strips for tele-communication and electronics, including computer application Phosphor Bronze Wire(Tin Bronze Core Wire) Pressure Die Cast Article made of Zinc. 1 a) Copper Wire Bar/ Cathode/ Ingot/ Rod Copper Scrap kg/kg content in kg/kg content in 1.075Kg/Kg content in. b) Tin Ingot kg/kg content in 2 Tin Ingot 1.05 Kg/Kg of tin content 1 kg 1 Copper Wire Bar/Cathode/Ingot/Rod 1.05 kg/kg content in export Copper Scrap 1.075Kg/Kg content in. 2 Tin Ingots 1.05 kg/kg content in export 1 kg 1 Zinc Ingots kg C1204 Pure Copper Powder 100 kgs 1 Copper kgs C1205 Deleted C1206 Silver Cadmium Oxide 1 Kg 1 Silver Bullion Purity 99.9% 1.03 Kg/Kg content Contact in export C1207 Silver Graphite contact 1 Kg 1 Silver Bullion Purity 99.9% 1.03 Kg/Kg content in export C1208 Silver Nickel Contacts 1 Kg 1 Silver Bullion Purity 99.9 % 1.03 kg/kg content in export 2 Nickel 99.8% purity 1.05 kg/kg content in export C1209 C1210 C1211 Silver Tungsten Graphite Contact Solder Bar (of Lead & Tin) Thermit Mixture/Powder containing Iron Oxide, Aluminium Powder C1212 Tin Ingots 1 kg 1 Tin Dross Tin Scrap 1 Kg 1 Silver Bullion Purity 99.9% 1.03 Kg/Kg content in export 2 Tungsten Graphite Purity 99.95% 1.05 Kg/kg content in export 1 MT 1 Lead 1.01 MT/MT content in export. 2 Tin 1.01 MT/MT content in export. 1 kg 1 Aluminium Powder 205 gms. 2 Iron Oxide gms. 3 Ferro Alloy 40.9 gms. 4 Addition (name to be specified) gms kgs 1.06kgs

235 C1213 C1214 C1215 C1216 Tin Metal of minimum 99.5% Purity Valve Stamps made of Brass Asbestos Free Roll Linings Cast Alloy permanent magnets 1 MT 1 Tin concentrate with Tin content of 55% to 65% C kgs 2 Tin Metal of purity 99.8% 300 kgs 1 Kg. 1 Brass Scrap 1.20 kg/kg content of brass in the export product 1 kg 1 Phenol Formal-dehyde Resin kg 2 Fibreglass Chopped Strands kg 3 Acrylonitrile Butadiene Rubber/ kg Nitrile ButileRubber 1 kg 1 Cobalt 1.05 kg/kg content in export. 2 Nickel 1.05 kg/kg content in export. 3 Pure Iron 1.2 kg/kg content in export. 4 Aluminium Ingot 1.10 kg/kg content in export. 5 Copper 1.10 kg/kg content in export. C1217 Shifted to Chemical Group C1218 Shifted to Chemical Group C1219 Shifted to Textiles Group C1220 Shifted to Electronic Group C1221 Shifted to Chemical Group C1222 Hose Wire (Brass Plated) 1 Kg 1 Brass Plated Wire (Cold Drawn) 1.02 Kgs. C1223 Magnetic Assemblies 1 kg 1 Cobalt 0.26 kg Incorporating cast Alloy 2 Nickel 0.15 kg permanent magnets 3 Pure Iron Powder 0.55 kg e.g.holders/ positions/ floaters 4 Copper kg C1224 Shifted to Chemical Group C1225 Metal Graphite Block 1 kg 1 Copper Powder kg 2 Tin Powder kg 3 Natural Graphite kg 4 Lead Powder kg C1226 Spikes for use as Railway 1 kg. 1 MS Billets 1.21 kg Track material Note:- In case is galvanised, in addition to the above item, of Net weight of Steel to be galvanised may be allowed. C1227 Steel backed lead based 100 Kgs 1 CR Steel Kgs white metal (babbit) alloy 2 Lead Kgs bimetal strip generally 3 Tin Ingots/Scraps 2.68 Kgs confirming to SAE 13 or equivalent Antimony Ingots/Scraps 4.13 Kgs

236 C1228 C1229 Steel backed lead based white metal (babbit) alloy bimetal strip generally confirming to SAE 15 or equivalent Tungsten Disc alongwith Rod End, Cutting Sludge, Burnishing Sludge, Scrap Disc 100 Kgs 1 CR Steel Kgs 1.0 kg containing 0.5 kg.tungeste n Disc.& 0.5 kg. remaining items 2 Lead Kgs 3 Tin Ingots/Scraps 0.14 Kgs 4 Antimony Ingots/Scraps 5.99 Kgs 5 Arsenic 0.41 Kgs 1 Tungsten Rod 1.1 kg 2 Alumina Oxide Abrasive Cutting Wheels - OD 180 mm, ID 12.7 mm and Thickness 0.42 mm C1230 Head Pan 1 No 1 CRCA Sheet/Coil 0.7 mm mm Thickness C1231 Multi Cylinder Fuel 1 No A. RAW MATERIAL: Injection Pumps for Diesel Engines C236 5 Nos kg/kg content in. 1 Free Cutting Steel kgs 2 Ball Bearing Steel kgs 3 Cold Heading and Cold kgs Extruding Steel Wires 4 Case Hardening Steel Flats kgs 5 Profile Steel Bars kgs 6 Extrusion & Cold Forging Steel kg Bars/Rods 7 Aluminium Alloy Ingot kg B. COMPONENTS: 8 Gasket 12 Nos. 9 Valve Holder 2 Nos. 10 Ball 3 Nos. 11 Screws, all types 34 Nos. 12 Springs, all types 6 Nos. 13 Shims 4 Nos. 14 Washers, all types 20 Nos. 15 Seal Rings/O Rings/Shaft Seal 13 Nos. Rings/Spacer Rings 16 Threaded Bushings 2 Nos. 17 Closer Cap 1 No. 18 Sliding Sleeve 1 No. 19 Control Plunger 1 No. 20 Needle Roller Bearing 1 No. 21 Tappered Roller Bearings 2 Nos. 22 Levers 4 Nos. 23 Flyweight Castings 2 Nos. 24 Shaft 1 No.

237 25 Link Fork 1 No. 26 Locking Bolt 1 No. 27 Housing/Stop Housings 1 No. 28 Connecting Flange 3 Nos. 29 Valve Plates 4 Nos. 30 Spring Retainer 1 No. 31 Sealing Nut 1 No. 32 Pulling Electro Magnet 1 No. 33 Feed Pump 1 No. 34 Guide Bushing 1 No. 35 LDA/Manifold Pressure compensator 1 No. 36 Template 1 No. 37 Roller Tappet Body 4 Nos. 38 Stop Bracket 1 No. 39 Lever Shaft 1 No. 40 Bearing Shell 1 No. 41 Curve Template 1 No. 42 Link 1 No. 43 Screw Plug 2 Nos. 44 Strap 2 Nos. C. Misc. items: 45 Calibration Fluid (Test Oil) for Diesel Injection Pump, CBN/Diamond Honing Stick Blanks/Support Stone/Deburring Tools, Hone Holders, Plain Grinding Wheels/Disc Wheels for Lap/ Match Grinding/ CBN Wheels, Carbide End Mills/ Tools, Gear Shaper, Diamond Dresser, Deep Hole Drills, Reamers, Oil Stones, Broaches, Drills, Rack Milling Cutters, Machine Taps, Filter Paper/ Media and Super Finishing Stones C1232 Taper Roller Bearings 1000 Nos 1 Forged/Turned Inner Ring (Cone) in unfinished condition Upto 4% of FOB value of export Nos. C237

238 upto and including 400 gms per bearing weight 2 Forged/Turned Outer Ring (Cup) in unfinished condition C Nos. 3 Finished Cages (Retainer) 1010 Nos. 4 Finished Rollers Cold Drawn Wire Wire Rod 5 Misc. items: Grinding Wheels, Honing Stones, Diamond Drenning Rollers, Rust preventing Oils, Honing Oil & Anti Corrosion Lubricant Nos. 110 kgs 115 kgs Up to 5% of FOB value of export. For the export of assembled cones upto and including 300 gms, the items at S.No. 1,3,4 & 5 only shall be allowed. C1233 Taper Roller Bearings above 400 gms per bearing but upto and including 800 gms per bearing weight 1000 Nos 1 Forged/Turned Inner Ring (Cone) in unfinished condition 1100 Nos. 2 Forged/Turned Outer Ring (Cup) 1100 Nos. in unfinished condition 3 Finished Cages (Retainer) 1010 Nos. 4 Finished Rollers Cold Drawn Wire Wire Rod 5 Misc. items: Grinding Wheels, Honing Stones, Diamond Drenning Rollers, Rust Preventing Oils, Honing Oil & Anti Corrosion Lubricant Nos. 285 kgs 299 kgs Upto 5% of FOB value of export. For the export of assembled cones above 300 gms and upto and including 600gms, the items at S.No. 1,3,4 & 5 only shall be allowed. C1234 Taper Roller Bearings above 800 gms per bearing but upto and including 1200 gms per bearing weight 1000 Nos 1 Forged/Turned Inner Ring (Cone) in unfinished condition 1100 Nos. 2 Forged/Turned Outer Ring (Cup) 1100 Nos. in unfinished condition 3 Finished Cages (Retainer) 1010 Nos. 4 Finished Rollers Cold Drawn Wire Wire Rod 5 Misc. items: Grinding Wheels, Honing Stones, Diamond Drenning Rollers, Rust Preventing Oils, Honing Oil & Anti Corrosion Lubricant Nos. 357 kgs 375 kgs Upto 5% of FOB value of export. For the export of assembled cones above 600 gms and upto and including 900gms, the items at S.No. 1,3,4 & 5 only shall be allowed. C1235 Taper Roller Bearings above 1200 gms per bearing but upto and including 1600 gms per bearing weight 1000 Nos 1 Forged/Turned Inner Ring (Cone) in unfinished condition 1100 Nos. 2 Forged/Turned Outer Ring (Cup) 1100 Nos. in unfinished condition 3 Finished Cages (Retainer) 1010 Nos. 4 Finished Rollers Nos.

239 C239 Cold Drawn Wire Wire Rod 5 Misc. items: Grinding Wheels, Honing Stones, Diamond Drenning Rollers, Rust Preventing Oils, Honing Oil & Anti Corrosion Lubricant 574 kgs 603 kgs Upto 5% of FOB value of export. For the export of assembled cones above 900 gms and upto and including 1200gms, the items at S.No. 1,3,4 & 5 only shall be allowed. C1236 Taper Roller Bearing above 1600 gms per bearing but upto and including 2000 gms per bearing weight 1000 Nos. 1 Forged/Turned Inner Ring (Cone) in unfinished condition 1100 Nos. 2 Forged/Turned Outer Ring (Cup) 1100 Nos. in unfinished condition 3 Finished Cages (Retainer) 1010 Nos. 4 Finished Rollers Cold Drawn Wire Wire Rod 5 Misc. items: Grinding Wheels, Honing Stones, Diamond Drenning Rollers, Rust Preventing Oils, Honing Oil & Anti Corrosion Lubricant Nos. 629 kgs 660 kgs Upto 5% of FOB value of export. For the export of assembled cones above 1200 gms and upto & including 1500gms, the items at S.No. 1,3,4 & 5 only shall be allowed. C1237 Taper Roller Bearings above 2000 gms per bearing but upto and including 2400 gms per bearing weight 1000 Nos. 1 Forged/Turned Inner Ring (Cone) in unfinished condition 1100 Nos. 2 Forged/Turned Outer Ring (Cup) 1100 Nos. in unfinished condition 3 Finished Cages (Retainer) 1010 Nos. 4 Finished Rollers Cold Drawn Wire Wire Rod 5 Misc. items: Grinding Wheels, Honing Stones, Diamond Drenning Rollers, Rust Preventing Oils, Honing Oil & Anti Corrosion Lubricant Nos. 792 kgs 832 kgs Upto 5% of FOB value of export. For the export of assembled cones above 1500 gms and upto & including 1800gms, the items at S.No. 1,3,4 & 5 only shall be allowed. C1238 Taper Roller Bearings above 2400 gms per bearing weight 1000 Nos. 1 Forged/Turned Inner Ring (Cone) in unfinished condition 1100 Nos. 2 Forged/Turned Outer Ring (Cup) 1100 Nos. in unfinished condition 3 Finished Cages (Retainer) 1010 Nos. 4 Finished Rollers Cold Drawn Wire Wire Rod Nos kgs 1365 kgs

240 5 Misc. items: Grinding Wheels, Honing Stones, Diamond Drenning Rollers, Rust Preventing Oils, Honing Oil & Anti Corrosion LubricantLubricant C240 Upto 5% of FOB value of export. Note: In respect of Sl.No.C1232 to C1238, material of construction for items of imports appearing at Sl.Nos.1, 2 & 4 in each weight range shall be bearing quality alloy steel to grades SAE 52100/8620H/20 Hi- MC/8219 R or equivalent.for the export of assembled cones above 1800 gms, the items at S.No. 1,3,4 & 5 only shall be allowed. C1239 Indexable Tool Holder 1 No 1 Clamping Elements Net to net. 2 Toggle Levers Net to net. C1240 C1241 C1242 C1243 C1244 C1245 C1246 C1247 C1248 C1249 Oxide Bonded Silicon Carbide Refractory TT Cam Shuttle Race Complete Clamp Stop Motion Crank Needle Clamp Feed Regulator Feed Fork 3 Clamping Screws Net to net. 4 Driver for screws (Torx keys) Net to net. 5 Shim Pins Net to net. 6 Tungsten Carbide Shims Net to net. 7 Tungsten Carbide Inserts (Consumable) 1000 kgs. 1 Silicon Carbide Crude Silicon Carbide Grains (Silicon Carbide percentage less than 95%) 2 Micro Silica 75 kgs Upto 2% of FOB value of export kgs 985 kgs 3 Calcium Lignosulphonate 40 kgs (Lithopix) 1 kg 1 Pig Iron/Scrap 1.00 kg 2 Steel Scrap 0.20 kgs 1 kg 1 Pig Iron/Scrap 1.00 kg 2 Steel Scrap 0.20 kg 1 kg 1 Pig Iron/Scrap 1.00 kg 2 Steel Scrap 0.20 kg 1 kg 1 Steel Scrap 0.20 kg 2 Pig Iron/Scrap 1.00 kg 1 kg 1 Pig Iron/Scrap 1.00 kg 2 Steel Scrap 0.20 kg 1 kg 1 Pig Iron/Scrap 1.00 kg 2 Steel Scrap 0.20 kg 1 kg 1 Pig Iron/Scrap 1.00 kg 2 Steel Scrap 0.20 kg Feed Driven Rock Shaft 1 kg 1 Pig Iron/Scrap 1.00 kg Crank 2 Steel Scrap 0.20 kg Feed Lifting Rock Shaft 1 kg 1 Pig Iron/Scrap 1.00 kg 2 Steel Scrap 0.20 kg C1250 Shuttle Race Ring 1 kg 1 CRCA Sheet 2.00 kg C1251 Shuttle Driven 1 kg 1 CRCA Sheet 2.00 kg C1252 Face Plate Complete 1 kg 1 CRCA Sheet 1.30 kg C1253 Slide Plate 1 kg 1 CRCA Sheet 1.07 kg

241 C1254 Tension for Plate 1 kg 1 CRCA Sheet 1.00 kg C1255 Bobbincase 1 kg 1 CRCA Sheet 0.6 kg 2 MS Alloy Steel Bar/Rod 3.0 kgs C1256 Bobin Winder Complete 1 kg 1 CRCA Sheet 1.5 kg C1257 Lifter 1 kg 1 CRCA Sheet 1.33 kg C1258 Thread Take Off Lever 1 kg 1 CRCA Sheet 2.00 kg C1259 Roller for Regulator 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.5 kg C1260 Pressure Bar Thumb Screw 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.25 kg C1261 Pressure Foot 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.40 kg C1262 Feed Cam 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.40 kg C1263 Needle Bar Bushing 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.6 kg C1264 Link Body 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.6 kg C1265 Stud 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.15 kg C1266 Arm Shaft 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg C1267 Head Hinges 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg C1268 Pitman with Rod 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg C1269 Stand Fitting 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg C1270 C1271 C1272 Pitman Crank with Fittings Single piece forged and machined shuttle hook. Centre Small Screw with Nuts 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg 1 kg 1 Mild Steel/Alloy Steel/ Bars/Rods of relevant grades. C241 6 kg 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.25 kg C1273 Needle Plate 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.40 kg C1274 Pressure Bar 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg C1275 Screw & Nut for Feed Fork 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.25 kg C1276 Needle Bar 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg C1277 Screw & Nut for CC Rod 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.25 kg C1278 Shuttle Race Top Spring 1 kg 1 MS/Alloy Steel/ Bars/Rods 2.00 kg C1279 O/S Rock Shaft 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.1 kg C1280 Ball Bearing upto and including 50 gms/bearing C1281 Ball Bearing above 50 gms but upto 100 gms/bearing 1000 Nos 1 Steel Wire/Bar/ Rod 22 kgs 2 Seamless Steel Tubes 30 kgs 3 Steel Balls 8250 Nos. 4 Cages (Retainer) 1050 Pairs 5 Metal Shield Plates/Rubber Seals (with backing Steel Sheet) 2100 Nos Nos 1 Steel Wire/Bar/ Rod 50 kgs 2 Seamless Steel Tubes 65 kgs 3 Steel Balls 8360 Nos. 4 Cages (Retainer) 1050 Pairs 5 Metal Shield Plates/Rubber Seals (with backing Steel Sheet) 2100 Nos.

242 C1282 Ball Bearing above 100 gms but upto 200 gms/bearing C1283 Ball Bearing above 200 gms but upto 500 gms/bearing C1284 Ball Bearing above 500 gms but upto 1000 gms/bearing C1285 Ball Bearing above 1000 gms/bearing 1000 Nos 1 Seamless Steel Tubes 230 kgs 2 Steel Balls 9900 Nos. 3 Cages (Retainer) 1050 Pairs 4 Metal shield Plates/Rubber Seals 2100 Nos. (with backing Steel Sheet) 1000 nos 1 Seamless Steel Tubes 570 kgs 2 Steel Balls 9680 Nos. 3 Cages (Retainer) 1050 Pairs 4 Metal Shield Plates/Rubber Seals 2100 Nos. (with backing Steel Sheet) 1000 nos 1 Seamless Steel Tubes 980 kgs 2 Steel Balls 9130 Nos. 3 Cages (Retainer) 1050 Pairs 4 Metal Shield Plates/Rubber Seals 2100 Nos. (with backing Steel Sheet) 1000 nos 1 Inner Race of Bearing (in Ring 1050 Nos. form) 2 Outer Race of Bearing (in Ring 1050 Nos. form) 3 Steel Balls 8800 Nos. 4 Cages (Retainer) 1050 Pairs 5 Metal Shield Plates/Rubber Seals 2100 Nos. (with backing Steel Sheet) Note: 1 In respect of norms covered by Sl.No.C1280 to C1285, materialof construction for Inner/Outer Race, Seamless Steel Tubes, Steel Wire/Bar/Rod and Steel Balls should be bearing grade steel to specification SAE or equivalent.2. In addition to the inputs specified against the norms at S.No.C 1280 to C-1285, import of miscellaneous items namely Grease, Grinding Wheels, Honing Stones, Polishing Compound, Diamond Drilling Roller, Rust Preventing Oil and Chemicals shall bepermitted for a total CIF value restricted to 5% of the FOB value.3) Import of Shield should be allowed only in respect of Bearing fitted with Shield.4) Wherever there is export of Ball Bearing with Housing, after ascertaining the weight of the Ball Bearing, the import of input may be allowed applying relevant SION at C-1280 to C C1286 Diesel Engine 1 No 1 Piston Assembly Set Net to net. C1287 C1288 C1289 Taper Rollers for Bearings Ball Valve Carbon Steel Submerged Arc Welded Pipes with 3 Layer Polyethylene coating of 2 mm thickness and having coating weight of 2.75 kgs +/- 5% per Sq.Mtr. 1 kg 1 Steel Wire Rods/ Wire Coils of 100 CR6 (SAE-E-52100) 2 Grinding Wheels and Die/Steel Tool C kg/kg content in. Upto 5% of FOB value of export. 1 No 1 Steel Balls Net to net. 2 Disc Spring Net to net. 3 Hex Hd Bolt Net to net. 4 Hex Full Nut Net to net. 5 Int. Lock Washer Net to net. 1 MT 1 Non-Alloy HR Coils/Plates 1.05 MT/MT content in 2 Welding Wire 4.13 kgs 3 Epoxy Powder kg/ Sq.Mtr. of Pipe. 4 Adhesive kg/ Sq.Mtr. of Pipe. 5 Polyethylene 2.53 kg/ Sq.Mtr. of Pipe.

243 6 Misc. items: Welding Flux, Up to 6% of FOB Grinding Wheel, CO2 Wire, Rust value of exports. Preventing Oil, X-Ray Film, Steel Shots, Steel Grits, Brush for cut back, Taper, Support Wheel,Prep. tape, Prep. Filler,Heat Shrink Sleeve, Epoxy Promer Kit, Melt Stick and Lubricating Oil. Note: 1 An additional item X-Ray Tube will be allowed for order of pipes above 25,000 MT. C1290 Carbon Steel Submerged Arc Welded Pipes with 3 Layer Polyethylene coating of 2.5 mm thickness and having coating weight of kgs +/- 5% per Sq.Mtr. 1 MT 1 Non-Alloy HR Coils/Plates 1.05 MT/MT content in 2 Welding Wire 4.13 kgs 3 Epoxy Powder kg/ Sq.Mtr. of Pipe. 4 Adhesive kg/ Sq.Mtr. of Pipe. 5 Polyethylene 2.91 kg/ Sq.Mtr. of Pipe. 6 Misc. items: Welding Flux, Up to 6% of FOB Grinding Wheel, CO2 Wire, Rust value of export. Preventing Oil, X-Ray Film, Steel Shots, Steel Grits, Brush for cut back, Taper, Support Wheel, Prep. Tape, Prep. Filler, Heat Shrink Sleeve, Epoxy Promer Kit, Melt Stick and Lubricating Oil. Note: 1 An additional item X-Ray Tube will be allowed for order of pipes above 25,000 MT. C1291 Carbon Steel Submerged 1 MT 1 Non-Alloy HR Coils/Plates 1.05 MT/MT content Arc Welded Pipes with 3 in Layer Polyethylene 2 Welding Wire 4.13 kgs coating of 3 mm thickness and having coating 3 Epoxy Powder kg/ Sq.Mtr. of Pipe. weight of 3.60 kgs +/- 5% per Sq.Mtr. 4 Adhesive kg/ Sq.Mtr. of Pipe. 5 Polyethylene 3.34 kg/ Sq.Mtr. of Pipe. 6 Misc. items: Welding Flux, Grinding Wheel, CO2 Wire, Rust Preventing Oil, X-Ray Film, Steel Shots, Steel Grits, Brush for cut back, Taper, Support Wheel,Prep. Tape, Prep. Filler,Heat Shrink sleeve, Epoxy Promer Kit, Melt Stick and Lubricating Oil. C243 The CIF value of all these items taken together is restricted to 6% of the FOB value Note: 1 An additional item X-Ray Tube will be allowed for order of pipes above 25,000 MT. C1292 Carbon Steel Submerged 1 MT 1 Non-Alloy HR Coils/Plates 1.05 MT/MT content Arc Welded Pipes with 3 in Layer Polyethylene 2 Welding Wire 4.13 kgs coating of 3.5 mm thickness and having 3 Epoxy Powder kg/ Sq.Mtr. of Pipe. coating weight of 4.20 kgs +/- 5% per Sq.Mtr. 4 Adhesive kg/ Sq.Mtr. of Pipe. 5 Polyethylene 4.0 kg/ Sq.Mtr. of Pipe. 6 Misc. items: Welding Flux, The CIF value of all

244 C244 Grinding Wheel, CO2 Wire, Rust Preventing Oil, X-Ray Film, Steel Shots, Steel Grits, Brush for cut back, Taper, Support Wheel, Prep. Tape, Prep. Filler, Heat Shrink Sleeve, Epoxy Promer Kit, Melt Stick and Lubricating Oil. Note: 1 An additional item X-Ray Tube will be allowed for order of pipes above 25,000 MT. C1293 Double Fibre Glass Covered/Insulated Round/Rectangular Copper Wire Strip C1294 C1295 Filter Packs made of Stainless Steel Wire Mesh (Fitted in Aluminium Rings) Horizontal Split Case Single Stage Double Suction Pump these items taken together is restricted to 6% of the FOB value 1 kg 1 Copper Wire Bar/ Wire Rod 1.01 kg/kg content in. 2 Glass Fibre Yarn 1.03 kg/kg content in. 1 kg 1 Stainless Steel Wire Mesh 1.20 kg/kg content in. 1 No 1 Mechanical Seal Net to net. 2 Single Row Deep Groove Ball Bearing Net to net. 3 CDA-975 Ingot (Silicon Bronze) 1.05 kg/kg weight of finished Impeller. C1296 Zinc Anode 1 kg 1 Special High Grade Zinc 1.03 kg/kg content in. C1297 Alluminium Anode 1 kg 1 Aluminium Ingots 1.05 kg/kg content in. 2 Zinc 1.03 kg/kg content in. C1298 Shifted to Chemical Group C1299 Band Saw Segments/Band Saw in Coil made from Carbon Steel/Bimetal Steel 1 kg 1 Relevant CR Steel/Bimetal steel Strip/Wide Coil 1.20 kg 2 Gang Milling Cutter 1 Gang/ 1474 kgs of export. Note: 1 The total CIF value of item 2 shall not exceed 5% of FOB value of exports. C1300 Domestic Sewing Machine with standard accessories/ Embroidery Sewing Machine/Industrial Sewing Machine/ Overlock Sewing Machine with or without cover C1301 C1302 Portable Bag Closure Machine L.V. Distribution Pillar 1 No 1 Alloy Steel Bar/ Rod 1.3 kg/kg content in export. 2 CRCA Sheet/Coil/ Seconds 1.2 kg/kg content in export. 3 Pig Iron/CI Scrap/ Steel Scrap 1.2 kg/kg content in export. 1 No 1 Alloy Steel Bar/ Rod 1.3 kg/kg content in export. 2 CRCA Sheet/Coil/ Seconds 1.2 kg/kg content in export. 3 Aluminium Ingots 1.1 kg/kg content in export. 1 No 1 GP Sheets/Coils CRCA Mild steel sheets/coils (including Secondary & 1.05 Kg/kg content of steel items in export product kg/kg content of steel items in export

245 C1303 C1304 C1305 C1306 L.V. Distribution Cabinet Switch Fuse Unit Bolt, Nut, Sleeve for Wheel Assembly Flange Type Rear Axle Shaft C245 Defective) Aluminium Sheet Aluminium Alloy Ingot (CG grade/ EC grade) 2 Copper Wire Bars/Copper Strips (Electrolytic/ETP Grade) product kg/kg content of Aluminium items in kg 1.01 kg/kg content of Copper items in. 3 Brass Scrap 1.05 kg/kg content of Brass items in export product. 4 Electrical Component Net to net 1 No 1 Glass Reinforced Plastic enclosures 2 Copper Wire Bars/Copper Strips (Electrolytic/ETP Grade) Net to net kg/kg content of Copper items in. 3 Brass Scrap 1.05 kg/kg content of Brass items in export 1 No 1 CRCA Mild Steel Sheets/Coils (including Secondary & Defective) GP Sheets/Coils (including Secondary & Defective) 2 Copper Wire Bars/Copper Strips (Electrolytic/ETP Grade) 1 kg 1 Alloy/Non-Alloy Steel Bars/ Rounds/ Billets 1 kg 1 Alloy/Non-Alloy Steel Bars/ Rounds/ Billets C1307 Treaded Adopter 1 kg 1 Alloy/Non-Alloy Steel Bars/ Rounds/ Billets C1308 Wheel Wrench 1 kg 1 Alloy/Non-Alloy Steel Bars/ Rounds/ Billets C1309 Round/rectangular High 1 No 1 Relevant Diffusion Lens 1 No. Beam Head Lamp C1310 C1311 C1312 Round/Rectangular Fog Lamp Round/Rectangular Work Lamp Electrical Cutout 1 No 1 Relevant Diffusion Lens 1 No. 1 No 1 Relevant Diffusion Lens 1 No. 1 No 1 CRCA Sheets/Coils GP Sheets/Coils Aluminium Sheet Relevant Glass Reinforced Plastic Enclosures 1.05 kg/kg content of steel items in export 1.05 kg/kg content of steel items in export 1.01 kg/kg content of Copper items in kgs/kg content in export kgs/kg content in export kgs/kg content in export kgs/kg content in export kg/kg content of steel items in the export 1.05 kg/kg content of steel items in the export 1.01 kg/kg content of Aluminium item in Net to net

246 C1313 C1314 C1315 C1316 C1317 C1318 Drill Collars Magnetic or Non Magnetic Slic or Spiral Silver Brazing Alloy in the form of Strips/ Wire/ Powder/ Foil/ Blanks/ Discs/ Profile/ Sheet/ Rod as per ASTM/ JIS/ DIN/ BIS/IBS standard or equivalent Electroformed Nickel Micro Screen Tungsten Wire(Black) Tungsten Wire (Clean) Precious Metals Spinnerettes containing Gold 49.5%, Platinum 49.5% & Rhodium 1% 2 Copper Wire Bars/ Copper Strips 1.01 kg/kg content of Copper items in the. 3 Brass Scrap 1.05 kg/kg content of Brass items in the. 100 No 1 Relevant Hollow Drill Collar 102 Nos. Bar, Tube, Magnetic or Non Magnetic of relevant dia 1 kg 1 Silver Bullion (Minimum Purity 99%) 1.03 kg/kg content in. 2 Copper(Minimum Purity 99%) 1.05 kg/kg content in the export Product. 3 Zinc (Minimum Purity 99%) 1.05 kg/kg content in the export Product. 4 Cadmium(Minimum Purity 99%) 1.05 kg/kg content in the export Product. 5 Nickel(Minimum Purity 99%) 1.05 kg/kg content in the export Product. 6 Tin (Minimum Purity 99%) 1.05 kg/kg content in the export Product. 1 No 1 Inco `s' Nickel Round/ Pellets Unwrought and Unalloyed 1 kg 1 Tungsten Wire above 0.9 mm 1.08 kg 2 Colloidal Graphite with solid 0.10 kg content of 20% 1 kg 1 Tungsten Wire above 0.9 mm 1.12 kg 2 Colloidal Graphite with solid 0.10 kg content of 20% 1 kg 1 Gold kg 2 Platinum kg 3 Rhodium Scrap Spinnerettes/ Eyes/ Thimbles of relevant grade kg/kg content in export kg 1.04 kg/kg content of each precious metal in Note: In case of any change in the specification of, the requirement may be worked out by allowing 4% wastage on net content of each item in. C1319 Containers made of 1 MT 1 Boiler Quality Plates MT Boiler Quality Plate for 2 Welding Wire 9 kgs Chlorine 3 Welding Flux 11 kgs Note: The cummulative value of items 2 & 3 shall not exceed 5% of FOB value of exports. C1320 Integrated Wiring 1 No 1 Body Clips/Cable Ties Net to net. Harness 2 Cable Channels Net to net. 3 Cavity Plugs Net to net. 4 Connector Covers Net to net. 5 Connectors Net + 2% wastage. 6 Conv. Conduits Net to net. 7 Diodes Net to net. 8 End Fittings Net to net. C246

247 C1321 Instrument Cooling Fan Sleeve Bearing Type or Ball Bearing Type 110V AC/ 115V AC/ 220V AC/230V AC/24V AC 9 Fuseboxes Net to net. 10 Fuses Net to net. 11 Grommets Net + 3% wastage. 12 Moulded Connector Assemblies Net to net. 13 Octane Rating (Resistor) Net to net. 14 PVC Coated Copper Wires Net to net. 15 PVC Tapes Net + 2% wastage. 16 PVC Tubes or Nylon Knitted Texture Tube Net to net. 17 Ring Out Labels Net to net. 18 Seals Net to net. 19 Sec. Locks Net to net. 20 Shrink Tubes Net to net. 21 Sleeves Net to net. 22 Splice Clips Net to net. 23 Terminals Net to net. 24 Tesa Bands Net to net. 25 Textile Tapes (Relevant width and length) Net + 2% wastage. 26 Silicon Spray Net to net. 27 Terrostat Net to net. 1 No 1 Aluminium Ingot/ Aluminium Scrap Aluminium Housing 2 Cold Rolled Non-Grain Oriented (CRNGO) Electrical Steel Sheet Stator & Laminations of Rotor 3 Self Solderable Enamelled Copper Wire Self Bonding Copper Wire or CC Copper Rod (Electrolytic Grade) 4 Polybutlyne Therpetlate/ Nylon 66/ Polycarbonate 1.05 kg/kg content in the export Net to net kg/kg content in. Net to net kg/kg content in kg/kg content in kg/kg content in. 5 Expandable Polystrene 1.05 kg/kg content in. 6 Copper Wire/Strip 1.01 kg/kg content in. 7 Label Paper 1.05 kg/kg content in. 8 Components: a) Housing Clip b) Lock Washer (Circlip) c) Insulation Sleeve d) Brass Insert e) Shaft C247

248 C1322 C1323 C1324 C1325 Double Fibre Glass Covered/Insulated Round/Rectangular Copper Wire/Strip Enamelled Rectangular Copper Wire/ Strip Polymide Imide Enameled Glass Fibre Yarn covered Copper Conductor. Kapton Polyamide Film Insulated/ Covered Copper Wire/Strip C1326 Protective Apron for X- Ray having 0.25mm/0.35mm/ 0.50mm Lead equivalent thickness C248 f) Screw with Washer Net to net. g) Terminals h) Finger Guard i) Polyslider Washer j) Teflon Washer k) O-Ring l) Sintered Bush m) Interlock n) Spring o) Ball Bearing p) Brass Washer q) Hook up wire 9 Misc. items: Epoxy Paint, Epoxy Bond, Lubricating Oil, Cynoacrylic Adhesive, Varnish or Electrical Insulating Enamel and Insulation Tape Upto 2% of FOB value of export. 10 Impellor 1 Pc. 11 Thermistor 1 Pc. 1 kg 1 Copper Wire Bar/ Wire Rod/Cathode 1.01 kg/kg content in. 2 Glass Fibre Yarn 1.03 kg/kg content in. 1 kg 1 Copper Wire Bar/ Wire Rod/Cathode 1.01 kg/kg content in. 1 kg 1 Copper Wire Rod/Cathode 1.01 kg/kg content in. 2 Glass Fibre Yarn 1.01 kg/kg content in. 3 Polyamide imide enamel. 1.01Kg/Kg content in. 1 kg 1 Copper Wire Bar/ Wire Rod/Cathode 1.01 kg/kg content in. 2 Kapton Polyamide Film kg/kg content in. 3 Polyester Glass yarn 1.01Kg/Kg content in. 1 No 1 X-Ray Protective Sheeting of Lead having 0.125mm/ 0.175mm Lead equivalent thickness 1.05 Sq.Mtr/ Sq.Mtr content in export. Note: The is normally Two/Three fold of the thickness of Lead Equivalent Sheet imported. The quantity may accordingly be worked out. For example, in case the thickness of sheet of Lead Equivalent exported is 0.35mm and the thickness of shet imported is 0.17mm, the quantity of import to be allowed is 1.05x2=2.10 Sq.Mtr/Sq.Mtr of Sheet exported. Requirement for other thickness may be worked

249 out in similar way. C1327 Auto Transformers (Variable Voltage)(a) upto 30 KVA I phase or 90 KVA 3 phase C1328 Textile Machinery Continuous Open width Chainless Mercerising Machine 1 No 1 CRGO steel Laminations/ Sheets/ Coil/ Slits/ Cuts 2 Copper winding wires/ Strips/ Wire bars/ Wire Rods/ Cathodes 3 Carbon in brushes/ Blocks/ Rollers 2.64 kg per KVA 0.78 kg per KVA 5.0 Cub. Cm. per KVA 4 Brush Holder assembly Net to net 5 Servo Motor Magnets for Motors Net to Net 1 No 1 Stainless Steel Sheet/Coil SS304/ 316 Quality 1.25mm to 4mm 2 Stainless Steel Rounds/Bars 10mm to 50mm 3 Stainless Steel Pipes 1.25mm to 3.15mm 1.05 kg/kg content in kg/kg content in kg/kg content in. 4 Mild Steel Plate 6mm to 16mm 1.05 kg/kg content in. 5 Mild Steel Rounds/ Bars 25mm to 140mm 1.02 kg/kg content in. 6 Mild Steel Channel 100x50mm Net to net. 7 Seamless Tubes 215 to 450 O.D kg/kg content in. 8 C.I. Castings 1.02 kg/kg content in. 9 Tapered Roller Bearings Net to net. C1329 Cultivator (Shear) 1 kg 1 Profile Steel Bar 1.05 kg/kg content in export. C1330 Brass Lamp Caps 1 kg 1 Brass Scrap 1.10 kg/kg content in export. C1331 Knives & Cutting Blades 1 kg 1 Alloy Steel Flat Bars 1.25 kg/kg content in for Machine or for. mechanical appliances (Centre Blade and Peanut Blade size 46-1/4" and 42" length) C1332 Spheroidal Graphite quality Rolls for Rolling Mills - Fe-88.7%, C- 3.5%, Si-2.0%, Mn-1.0%, Ni-3.8%, Cr-0.5%, Mo- 1.0%, S %(Maximum) & P- 0.15%(Maximum) 1 MT 1 M.S. Scrap kgs 2 Ferro Silicon (Si %) kgs 3 Ferro Manganese (Mn %) kgs 4 Nickel kgs 5 Ferro Chrome (Cr %) kgs 6 Ferro Molybdenum (Mo kgs 70%) 7 Furnace Oil 500 Ltrs. 8 Bantanite Green Bond (Prepared Binders) kgs 9 Nickel Magnesium (Ni %, kgs Mg % and MM %) 10 Ferro Silicon Magnesium (Si %, Mg % and Fe - Balance) kgs 11 Graphite Electrodes 9.50 kgs C249

250 C1333 Steel Quality Rolls for Rolling Mills - Fe-93.8%, C-1.8%, Si-1.0%, Mn- 1.0%, Ni-0.6%, Cr-1.4%, Mo-0.4%, S- 0.04%(Maximum) & P- 0.04%(Maximum) 12 Ramming Mass kgs 13 Melted Flux 5.00 kgs. 14 Calcium Silicide 1.11 kg 15 Flourspar (Flux) kgs 16 Porous Plug (Laddle) 0.20 No. 17 CBN Tips 5.93 Nos. 1 MT 1 M.S. Scrap kgs 2 Ferro Silicon (Si %) kgs 3 Ferro Manganese (Mn %) kgs 4 Nickel kgs 5 Ferro Chrome (Cr %) kgs 6 Ferro Molybdenum (Mo-60-70%) 7 Furnance Oil kgs. 500 Ltrs. C1334 C1335 Alloy IC Quality Rolls for Rolling Mills - Fe-90.9%, C-3.3%, Si-1.6%, Mn- 1.2%, Ni-2.4%, Cr-1.1%, Mo-0.5%, S- 0.1%(Maximum) & P- 0.3%(Maximum) ICDP Qualaity Rolls for Rolling Mills containing Shell - Fe-88.7%, C- 3.5%, Si-2.0%, Mn-1.0%, 7 HSD 470 Ltrs. 8 Bantonite Green Bond (Prepared kgs Binders) 9 Flourspar kgs 10 CBN Tips 5.93 Nos. 11 Graphite Electrodes 9.50 kgs 12 Porous Plug 0.20 No. 13 Ramming Mass kgs 14 Melted Flux kgs 15 Calcium Silicide 2.30 kg 16 Ferro Aluminium 1.15 kgs 1 MT 1 M.S. Scrap kgs 2 Ferro Silicon (Si %) kgs 3 Ferro Manganese (Mn %) kgs 4 Nickel kgs 5 Ferro Chrome (Cr %) kgs 6 Ferro Molybdenum (Mo kgs 70%) 7 Furnance Oil 500 Ltrs. 8 Flourspar kgs 9 CBN Tips 5.93 Nos. 10 Graphite Electrodes 9.50 kgs 11 Porous Plug 0.20 No. 12 Ramming Mass kgs 13 Calcium Silicide 1.12 kg 1 MT 1 M.S. Scrap kgs 2 Ferro Silicon (Si %) kgs 3 Ferro Manganese (Mn %) kgs 4 Nickel kgs C250

251 C1336 C1337 Ni-3.8%, Cr-0.5%, Mo- 1.0%, S-0.016% & P- 0.15% & Core - Fe- 93.4%, C-3.5%, Si-2.0%, Mn-0.5%, Ni-0.4%, Cr- 0.2%, Mo-Nil, S-0.08% & P-0.1%. Hi-Crome Quality Rolls for Rolling Mills containing Shell-Fe- 73.8%,C-3.0%,Si- 1.0%,Mn-1.2%,Ni- 1.5%,Cr-18%,Mo- 1.5%,S-0.02% & P- 0.06% & P- 0.06%(Maximum) & Core-Fe-92.6%, C-3.2%, Si-2.0%, Mn-0.5%, Ni- 1.3%, Cr-0.4%, Mo-Nil, S-0.02% & P-0.06%. NM(H) Quality Rolls for Rolling Mills - Fe-92.1%, C-3.7%, Si-0.5%, Mn- 0.4%, Ni-2.5%, Cr-0.6%, Mo-0.2% 5 Ferro Chrome (Cr %) kgs 6 Ferro Molybdenum (Mo %) C kgs 7 Furnace Oil 500 Ltrs. 8 Bantanite Green Bond (Prepared Binders) kgs 9 Flourspar kgs 10 CBN Tips 5.93 Nos. 11 Graphite Electrodes 9.50 kgs 12 Ramming Mass kgs 13 Calcium Silicide 1.14 kg 1 MT 1 M.S. Scrap kgs 2 Ferro Silicon (Si %) kgs 3 Ferro Manganese (Mn %) kgs 4 Nickel kgs 5 Ferro Chrome (Cr %) kgs 6 Ferro Molybdenum (Mo kgs 70%) 7 Furnace Oil 500 Ltrs. 8 Bantanite Green Bond (Prepared Binders) kgs 9 Nickel Magnesium (Ni %, kgs Mg % and MM %) 10 Flourspar kgs 11 CBN Tips 5.93 Nos. 12 Graphite Electrodes 9.50 kgs 13 Ramming Mass kgs 1 MT 1 M.S. Scrap kgs 2 Ferro Silicon (Si %) kgs 3 Ferro Manganese (Mn %) kgs 4 Nickel kgs 5 Ferro Chrome (Cr %) kgs 6 Ferro Molybdenum (Mo kgs 70%) 7 Furnace Oil 500 Ltrs. 8 Ferro Phosphorous kgs 9 Flourspar kgs 10 Ferro Sulphur kgs 11 CBN Tips 5.93 Nos. 12 Graphite Electrodes 9.50 kgs C1338 Cold Formed Metal Section 1 kg 1 Cold Rolled Coil 1.02 kg C1339 Brass Cup 1 kg 1 Brass Strip Annealed 1.05 kg/kg content in. C1340 Auto Gate Latch, Ring 1 kg 1 CRCA Sheet 1.05 kg/kg content in.

252 C1341 C1342 C1343 C1344 C1345 Gate Latch, Ring Handle & Hand Rail Bracket Deleted Automatic Voltage Stabilisers/Servo Control Voltage Stabilisers (upto 5 KVA Capacity) Typewriter(Manual) with ABS Casing. Tin Anode/ Bar/ Slab/ Pig (99.85% Purity) Stabilizers 110/220 V 2 M.S. Rod 1.05 kg/kg content in. 1 kg 1 CRCA Sheet 1.05 kg/kg content in. 2 CRGO Silicon Steel Sheet 1.05 kg/kg content in. 3 Super Enamelled Copper Wire/ Electrolytic Copper Wire Rod C kg/kg content in. 4 Carbon Brush Blocks 1.10 kg/kg content in. 5 Light Emitting Diodes Net to net. 6 Transistors Net to net. 7 Diodes Net to net. 8 Capacitors Net to net. 9 Resistors Net to net Nos 1 Cold Rolled Mild Steel 574Kgs. Strips/Coils/Sheets. 2 Manganese Chrome Steel Strips 702 kgs 3 Spring Steel Strips 150 kgs 4 Mild Steel Bars/ Wire 920 kgs 5 Stainless Steel Sheet 160 kgs 6 Aluminium Alloy (EM-6, LM kgs 24) 7 Zinc Ingot 500 kgs 8 ABS Granules 1.05 kg/kg content in 9 Type Sets Net + 1% wastage. 2 ABS Granules 1250Kgs. 3 Aluminium Alloy Ingots. 4700Kgs. 4 Steel Wires (Tempered and 139Kgs. Hardended/Profiles) 5 Steel Rollers 8000Nos. 6 Steel Type Sets Nos. 1 MT 1 Tin Ingot 1.01 MT 1 No. 1 Transistor Transistor Diode Capacitors 100/25 V Net to net 5 Light Emittig Diode 6mm 6 BWG 22x8 inch x 4 inch 13A Ceramic Fuse 7 Super Enamelled Copper Wire 30/33/38 SWG 8 Cold Rolled Cold Anealled (Mild Steel) C1346 Zinc Builders Hardware - 1 kg 1 Zn-Al Alloy (94%, 4% by wt.resp.) Ingot or scrap 110 gms 425 gms 1.10 kg/kg content in

253 C1347 C1348 C1349 C1350 C1351 C1352 C1353 C1354 C1355 Pressure Die Cast 2 Clad Concentrate/Solvent Replenisher/Emulsion etc. Shifted to Chemical Group Auto Parts Double Brake Chamber Type 24 L/S Auto Parts Brake Chamber Type 16 L/S Auto Parts Brake Chamber Type 20 L/S Auto Parts Brake Chamber Type 24 L/S Auto Parts Brake Chamber Type 30 L/S Auto Parts Brake Chamber Type 30 S/S Surgical Suture Needles (Eye Type, French Spring Eye Type & Atraumatic Type Needles) upto 250 mm Length. Auto Cables of various size C253 Upto 2% of FOB value of export 1 No. 1 CRCA sheets/coils 1.34 kg/kg content in. 2 Diaphragm Net to net 1 No. 1 CRCA sheets/coils 1.40 kg/kg content in 2 Diaphragms Net to net 1 No. 1 CRCA Sheets/coils 1.40 kg/kg content in 2 Diaphragms Net to net 1 No. 1 CRCA Sheets/Coils 1.39 kg/kg content in 2 Diaphragms Net to net 1 No. 1 CRCA sheets/coils 1.37 kg/kg content in 2 Diaphragms Net to net 1 No. 1 CRCA Sheets/Coils 1.40 kg/kg content in 2 Diaphragms Net to net 1 kg 1 Stainless Steel Wire of grade AISI-302/304/420/455 or its equivalent 1.25 kg 1 kg 1 Copper 1.01 kg/kg content in 2 PVC Compound 1.03 kg/kg content of PVC Compound in C1356 Deleted C1357 Deleted 1 No. C1358 Split Airconditioner 1 No. 1 Compressor Hermatically Sealed Net to net BTU consisting of compressors/reciprocating Type/Rotary Type/Scroll Type 1 condenser 1 Evaporator Suitable for Electrical supply of 110V or 120V or supply of 200V or 240V +/- 10% Tolerance limit and of 50 or 60 cycles capacity range:12000btu +/- 10% Tolerance limit 2 Bearing Assembly 3 Air Filter 4 Propeller(Fan) Condenser Fan 5 Capacitors (36 MFD. 440V) 6 Copper Tube Plan or Grooved 7.0mm O.D. to 9.52MM O.D. 7 Steel Sheets(GP and CRCA) Steel Sheet- GP-CRCA(0.6 mm to 2.0 mm +/- 8% thickness variation 1.01 kg/kg content in 1.05 kg/kg content in

254 C1359 Single phase Transformers(copper Wound)/Active Parts of Single phase transformers, above 25 KVA, up to and including 100 KVA 1 No. 1 CRGO Silicon Electrical steel kgs/kva Sheets/ Coils Transformer Core Alloy kgs/kva Amorphous Electrical steel 2 Copper Wire kgs/kva Bars//Rods/Cathodes 3 Transformer Oil base stock kgs/kva 4 Electrical Insulation materials kgs/kva kraft paper 5 Press Boards kgs/kva 6 Powder coating paint kg/kva 7 CRCA Sheets kg/kva Note: 1. CRCA Sheet to be allowed in case of complete Transformers only and not for its Active Parts C1360 Antimonial Lead 1 kg 1 Crude Antimonial Lead(Purity 1.10 kg Alloy/Calcium Lead 90%) Alloy(Ingots) (purity 99.97%) (calcium content 0.01 % to 0.02 % in the Calcium Lead Alloy) C1361 Single Phase Transformers (Copper Wound)/Active Parts of single phase transformers, upto and including 25 KVA 1 No. 1 CRGO Silicon Electrical steel 6.60 kgs/kva sheets/ Coils Transformer Core Alloy 8.25 kgs/kva Amorphous Electrical steel 2 Copper Wire kgs/kva Bars/Rods/Cathodes 3 Transformer Oil base stock kgs/kva 4 Electrical Insulation materialskraft kgs/kva paper 5 Press Boards kg/kva 6 Powder Coating Paint kg/kva 7 CRCA Sheets kgs/kva Note: 1. CRCA Sheet is to be allowed in case of export of complete transformers only and not for active parts C1362 Single Phase Transformers (Copper Wound)/Active parts of singel phase transformers, above-100 KVA up to & including 1000 KVA 1 No. 1 CRGO Silicon Electrical steel kgs/kva sheets/ Coils Transformer Core Alloy kg/kva Amorphous Electrical Steel 2 Copper Wire kgs/kva Bars/Rods/Cathodes 3 Transformer Oil base stock kgs/kva 4 Electrical Insulation materials kg/kva kraft paper 5 Press Boards kg/kva 6 Powder Coating Paint kg/kva 7 CRCA Sheets kgs/kva 8 Transformer Parts: a)porcelain Bushings (HV) Porcelain Bushings Assembly (H.V) C254 2 Nos. 2 Nos. 2 Nos. 2 Nos.

255 b)porcelain Bushings (LV) Porcelain Bushings Assembly (L.V.) 9 Magnetic Oil Level Gauge 1 No. 10 Pressure Vaccum Bleeder 1 No. 11 Oil Temperature Indicator 1 No. Note: 1. CRCA Sheets is to be allowed in case of export of complete transformers only and not for active parts. 2) In case of item No. 8, if the transformer is for H.V, item 8(a) is to be allowed only. Similarly, in case of L.V., item 8(b) is to be allowed only. C1363 Single Phase Transformers (copper Wound)/Active parts of single phase transformers, above 1000 KVS, upto & including 4000 KVA 1 No. 1 CRGO Silicon Electrical steel kgs/kva sheets/ Coils Transformer Core Alloy kg/kva Amorphous Electrical steel 2 Copper Wire kgs/kva Bars/Rods/Cathodes 3 Transformer Oil base stock kgs/kva 4 Electrical Insulation materials kg/kva kraft paper 5 Press Boardso kg /KVA 6 Powder Coating Paint kg/kva 7 CRCA Sheets kg/ KVA 8 Transformer Parts: a)porcelain Bushings (HV) Porcelain Bushings Assembly (H.V.) b)porcelain Bushings (LV) Porcelain Bushings Assemly (L.V) C255 2 Nos. 2 Nos. 2 Nos. >2 Nos. 2 Nos. 9 Magnetic Oil Guage 1 No. 10 Pressure Vaccum Bleeder 1 No. 11 Oil Temperative Indicator 1 No. Note: 1. CRCA Sheet is to be allowed in case of export of complete transformers only and not for active parts. C1364 Steel Fence post 1 kg 1 Wire Rods 1.05 kg/kg content in 2 Hot Rolled Coils 1.05 kg/kg content in C1365 Steeting Gear Assembly 1 kg 1 Steel Balls Net to net 2 Castings (Machined) Net to net Cast Iron 1.45 kg/kg content in 3 Forgings Net to net Bar SAE kg/kg content in 4 CRCA Sheet 1.30 kg/kg content in 5 Rubber (relevant) 0.65 kg/kg of rubber parts content in the

256 C256 6 Aluminium Ingots 1.10 kg/kg content in 7 Bolts Net to Net Note: Item No. 6 Aluminium Ingots to be allowed for Steering Assembly with Aluminium Box C1366 Tungsten Filaments for 1 kg 1 Tungsten Wire (0.9mm & above 1.12 kg/kg of "J" Type Halogen Lamps dia) Tungsten Filament export weight excluding the weight of the mandrel. C1367 C1368 C1369 C1370 C1371 C1372 Lamp Socket Assembly for Auto Dash Board Instruments Aluminium foil Stock, Litho Stock, Closure Stock, Venetial Blind Stock, Sheets for PCB/ Sigh Boards in Sheet/ Coil Form Lapping Sleeves Mechanical Control Cable Tungsten Filaments for Fluoroescent Tubes upto 20 watts Tungsten Filaments for Fluoroescent Tubes 36 watts and 40 watts 2 Molybdenum Wire (0.9mm & above dia) 0.85 kg/kg of Tungsten Filament export weight excluding the weight of the mandrel 3 Tungsten rod Up to 33% of the number of Tungsten Filaments exported. 1 No. 1 Terminal Net to net 2 Lamp (Wedge Type) Net to net 1 kg 1 Aluminium Scrap 1.10 kg 1 No. 1 Pig Iron 1.20 kg/kg content in 2 Graphite 1.20 kg/kg content in. 3 Ferro Silicon 1.20 kg/kg content in. 4 Ferro Manganese 1.20 kg/kg content in. 5 Ferro Chrome 1.20 kg/kg content in. 6 Super Seed Inoculant 1.20 kg/kg content in. 1 No. 1 M.S. Spiralstrip Net to Net 2 Modulator Control Valve Net to Net 3 Armored MS/SS Wire Rope 1.05 Mtr./ Mtr. in 4 Relevant Polyacetal Tube with Mtr./Mtr. Strand Carbon Steel Wire Outer content in export Jacket of LDPE or Polypropylene product 1000 Nos. 1 Tungsten Wire (Black) gms 2 Molybdenum Wire (Black) gms 3 Collodial Graphite 3.67 gms 1000 Nos. 1 Tungsten Wire (Black) gms 2 Molybdenum Wire (Black) gms 3 Collodial Graphite 4.19 gms C1373 PVC Insulated Single 1 kg. 1 Copper Wire Rod kg/kg content in export.

257 Core Cable 0.5 Sq. mm 2 PVC Compound 1.05 kg/kg content in export C257 2) a)pvc Resin b)plastisizer (PVC) c)filler (CaCo3) d)lubricant (wax or Lead Stearate) 0.57 kg kg kg 0.01 kg Note: The quantity of item 2(a) to 2(d) is per kg content of PVC Compound in. C1374 Machined cast 1 kg 1 Cathode Copper and respective 1.20 kg/kg content in components for alloying element Chromium, Nickel, Cobalt, Beryllium and switchgears resistance Silicon welding parts, Heat Sinks, Diode bases manufactured out of high conductivity copper with other alloying elements like Chromium, Nickel, Beryllium, Cobalt and Silicon each not exceeding 5%conforming to BS HCC1/BS1400-CC1-TF/ DIN GCU L50- DIN 17655GCU CR F35/ASTMB a/ R40, R75, R76, R78, R80 of AFN specification meeting conductivity requirements of 40 to 90% IACS C1375 Machined cast Bushings of Automotive and Non Automotive applications, Pumps and value Components like casing, impellers, Discs, Plugs Yoke Sleeves, Seals, Spacers and Bearing, Hexagonal Nuts, Earthing Clamps manufactured out of gun metal or Lead Bronze or Red Brass with copper and allowing elements Tin, Lead and Zinc varying from 1 to 10% each, Conforming to BS 1400-LB2,LG2, LG4 Alloy BS1400-G3/DIN 1705-RG5, RG7/ ASTMB 584 ASTMB 763- C84400, C03200/C93700/SAE kg. 1 Gun Metal/ Red Brass/Leaded Bronze Ingot/Copper Cathode with alloying elements Tin, Lead and Zinc, Nickel C1376 Machined cast bushings 1 kg. 1 Brass ingots Copper Cathode with alloying elements like Zinc, 1.20 kg/kg content in 1.20 kg/kg content in

258 C1377 C1378 of Automotive & Non- Automotive application, Machined cast components for valves internals including casing, impellers,discs,plugs, yoke sleeves, Yoke bushes,seals, spacers and bearing, Hexagonal nuts, earthing clamps, spindle, stems, wedges, seat rings etc. manufactured out of Silicon brass/silicon Bronze/high tensile brass or with copper and alloying elements, like Zinc varying from 10-35% and other elements like Aluminium, Manganese, Silicon, Iron Lead each not exceeding 5% conforming to ASTM B584-C87500, C87600, C87610/ASTM B371 Machined cast bushings of Automotive & Non- Automotive application, Machined cast components for valves internals including casing, impellers, discs, plugs, yoke sleeves, Yoke bushes, seals, spacers and bearing, Hexagonal nuts, earthing clamps, spindle, stems, wedges, seat rings etc. manufactured out of Aluminium Bronze or with coper and alloying elements like Aluminium 8 to 11% and Iron 1.5 to 3.5 conforming to BS 1400-AB1/ASTM B 148- C95200, C95300/DIN 1714 GCUAL 10 FE. Writing Boards made of coated Steel Sheet Surface C258 Aluminium, Lead, Manganese and Silicon 1 kg. 1 Aluminium Bronze ingots Copper Cathode with alloying element Aluminium 1.20 kg/kg content in 1 No. 1 Coated Steel Sheet Surface 1.02 kg/kg content in 2 Galvanised Steel Sheet 1.02 kg/kg content in 3 Aluminium Section 1.02 kg/kg content in 4 ABS Moulding Powder 1.05 kg/kg. content in C1379 Brush Gear Assembly 1 No. 1 Carbon Brushes of relevant 4 Nos.

259 (for automobile starter specification motor) C1380 Clip Assembly 1 No. 1 Carbon Brushes of relevant 1 2 Nos. specification C1381 Gear Assembly 1 No. 1 Alloy Steel Bars/ Billets 1.70 kg/kg content in C1382 Armoured/ Un-armoured PVC Insulated Submersible/ Flexible/ Control/ Power purpose Copper Cable rating upto 1100 volts, not elsewhere specified 2 Misc Items: Band Saw Blades, Die Block/ Steel, No Carb Paste, Diamond Dresser for ID Grinding, Diamond Dresser Blade for angular wheel grinding machine, Grinding Wheel, Gun Drill, Involute Spline Broach, Welding, Wires, Hob for 71 teeth gear, gear profile grinding wheel, fassler Diamond dressing wheel 1 kg. 1 Copper Cathode/Wire Rod/Wire Bar 2 PVC Compound C259 Upto 4% of FOB value of export 1.01 kg/kg content in 1.05 kg/kg content in. 2 a) PVC Resin 60% of PVC compound. b) Plasticizer (PVC) 30% of PVC Compound. c) Filler (Calcium Carbonate/ Alummina/ talc/ kaoline/china Clay 10% of PVC Compound. 3 Tinned Copper Wire 1.01 kg/kg content in. 4 Galvanised Steel Wire 1.02 kg/kg content in. Note:Tinned Copper Wire shall be allowed in Tin Copper braided/screened flexible Copper Cables.Wherever PVC stabilizer (including molybdenum trioxide/tin Stabilizer) is asked for, it may be allowed upto 3% of the quantity of PVC compound, subject to reduction of the same %age in the quantity of PVC resin.paraffin wax wherever used may be permitted upto 1% of PVC compound subject to same percentage reduction in filler quantity. C1383 C1384 C1385 Automotive Oil Filter/ Fuel Filter/Spin-on Filters/Oil or Fuel Filter Assembly Canister-Lub Oil Filter/ Air Filter Bicycle Frames made of Aluminium Plates for Lead Acid Storage Battery 1 No. 1 CRCA Sheet/ Coil 1.45 kg/kg content in the export 2 Filter Paper of Mean Pore size 4-14 Micron for Fuel Filter and Mean Pore Micron for Oil Filter 1.05 kg/kg content in export 3 PVC Adhesive Compound/ Glue Not exceeding 1% of FOB value of export 4 Synthetic Rubber 1.10 kg/kg content in export 1 kg. 1 Aluminium Extruded Tubes of relevant size in terms of I.D/ O.D 1.02 kg/kg content in export 2 Filler Wire for Welding 2% of net weight of 1 No. 1 Pure Lead 1.02 kg/kg content in 2 Antimonial Lead Alloy of relevant grade 1.02 kg/kg content in 3 Fibre (CA Flock) Net to Net 4 Vanislperse (Lignin) 1.04 kg/kg content in

260 C1386 C1387 C1388 C1389 C1390 C1391 C1392 Railway Bogie for Meter Gauge Wagons (Weight 14.2 MT) Tablet Compression Tools of Steel T-Rail Anchors made of Steel Automotive Flexible Exhaust Connectors (Corrugated) made of Stainless Steel Deleted Mechanical Spray Pumps (15 mm to 20 mm) Copper/Aluminium Conductors for XLPE Insulated Armoured /Unarmoured PVC Sheathed Cable for 1100V/L.T. 5 Tubular Bags Net to net. 6 Cork Powder Net to net. 1 No. 1 Non-Alloy Steel Scrap MT 2 Ferro Manganese 25 kgs. 3 Ferro Silicon 21 kgs 4 Welding Electrode 7 kgs 5 Grinding Wheel 5 kgs 6 Graphite Electrode 6 kgs. 7 Industrial X Ray Film 9440 Sq. cms. 8 Furnace Oil/LDO 212 Ltrs. 1 kg. 1 Tool Steel Round Bar 1.35 kg 1 MT 1 Carbon Steel Billets IS: MT 1 MT 1 Stainless Steel Sheets/ Coils (relevant grade) 2 Stainless Steel Wire/ Rods (relevant grade) C MT/MT content in export 1.10 MT/MT content in export 3 Aluminised Steel Sheets/ Coils MT/MT content in. 1 No. A. COMPONENTS 1 Body (Poly Ethylene) 1 No. 2 Stem (Polyacetal) 1 No. 3 Actuator (PE/PP) 1 No. 4 Inner Gasket/ O Ring (Buna 1 No Rubber) 5 Steel Ball (Stainless Steel 304) 1 No. 6 Aluminium Cap 1 No. 7 Outer Gasket or Synthetic Rubber Sheet (Buna/ NBR) Thermoplastic Rubber Sheet. B. RAW MATERIALS 700 gms for 1000 Nos Gasket 700 gms for 1000 Nos Gasket 8 Aluminium Sheet (for Ferrules) Aluminium Ferrule 2.60 gms. Net to Net 9 Plastic Granules (for Dip Tube) 1.05 gm/gm content in export 1 km 1 Continuous Cast Copper Rod/ Cathodes/ Wire bars/ Wire Rod (EC Grade) 1.01 kg/kg content in 2 Aluminium Ingots/ Rods 1.01 kg/kg content in 3 XLPE Compound/Cross Linkable LDPE Compound 4 PVC Compound 4 a) PVC Resin b) Plasticizer (PVC) 1.05 kg/kg content in 1.05 kg/kg content in. 60% of PVC Compound 30% of PVC

261 C261 c) Filler (Calcium Carbonate/Alumina/Talc/Kaolin/ China Clay Compound 10% of PVC Compound 5 Steel Armouring Wire 1.02 kg/kg content in Note: Wherever PVC Stabilizer (including molybdenum trioxide/tin Stabilizer) is asked for, it may be allowed upto 3% of the quantity of PVC Compound, subject to reduction of the same %age in the quantity of PVC resin. Paraffin wax wherever used may be permitted upto 1% of PVC compound subject to same percentage reduction in filler quantity. C1393 C1394 C1395 Truck & Trailer Wheels All Aluminium Alloy Conductors Single Phase Shell construction motors with aluminium or cast iron and covers - 0 Watt to 90 Watts. 1 No. (Weight 46 Kgs +/-1%) 1 Non-alloy Steel Plates for Rim (HSN No ) kg 2 Non-alloy Steel Plates for Disc (HSN No ) kg 3 Non-alloy Steel Sections for Ring 9.0 kg. Special 'Z' type Section (HSN No ) 1. Non Alloy Steel Plates for Rim Kg Integral with Ring 2. Non Alloy Steel Plate for Disc Kg 1 kg 1 a) Primary Unalloyed Aluminium Aluminium Scrap 1.02 kg/kg content in the export 1.05 Kg/Kg content in the export proudct. b) Magnesium 1.10 kg/kg content in c) Silicon kg/kg content in 2 Aluminium Alloy Ingots/ Billets/ T-Bars/ Sows 1.01 kg/kg content in 3 Aluminium Alloy Wire Rod 1.01 kg/kg content in 1 No. 1 Cold Rolled Non-oriented (CRNO) Electrical Steel Sheets in Coil form gms/watt gms/watt CRCA Steel Sheets in Coil form 2 Copper Wire gms/watt Bars/Cathods/Rods/Winding Wires/Strips 3 Electrolytic grade Aluminium for gms/watt. Rotor 4 Commercial grade Aluminium in gms/watt Ingot form (upto 99.5% purity) for Housing 15 gms.watt CRCA Sheet for Housing 10.99gms/watt. Mild Steel Sheet for Housing 5 EN-8 Alloy Steel for Shaft 9.65 gms/watt. Stainless Steel for Shaft. 6 Ball/Sleeve/Roller Bearing 2 Nos. (Net to Net). 7 Composit insulation material upto 1.5% of FOB

262 C1396 C1397 Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers Watts to 375 Watts consisting of paper, Nylon, Polyester, Amide, Nomex films, Varnish, Tpe, Polyester cord. 8 Special packing material like Kraft paper for exportworthy packing lables, names plate, ribbon 9 Motor protectors/thermal protectors/thermo strips. vlue of export. Upto 3% of FOB vlue of exports. Net to net. 10 Power Capacotpr. 1 No. (Net to net). 11 Plastic insulated wire/cable. 6 Mtrs. (net to net) 12 Terminals, connectors. 8 Nos. each (Newt to net). 1 No. 1 Cold Rolled Non- Oriented (CRNO) Electrical Steel Sheets/ Sheets in Coil form CRCA Steel Sheets/ Sheets in gms/watt gms/watt Coil form 2 Copper Wire Bars/ Cathods/ Rods/ Winding Wires/ Strips 7.19 gms/watt 3 Electrolytic grade Aluminium for 5.58 gms/watt Rotor 4 Commercial Grade Aluminium in 6.00 gms/watt Ingot form (upto 99.5% purity) for Housing 9.00 gms/watt CRCA Sheets for Housing 8.36 gms/watt Mild Steel Sheets for Housing 5 EN-8 Alloy Steel for Shaft 5.70 gms/watt Stainless Steel for Shaft 6 Ball/ Sleeve/ Roller Bearings 2 Nos. (Net to Net) 7 Composit insulation material consisting of paper, nylon, polyester, amide, nomex films, varnish, tape polyester cord 8 Special packing material like Kraft Paper for exportworthy packing lables, name plate, ribbon 9 Motor Protectors/ Thermal Protectors/ Thermo Strips Upto 1.5% of FOB value of export Upto 3% of FOB Value of export Net to Net 10 Power Capacitor 1 No. (Net to Net) 11 Plastic Insulated Wire/Cable 6 Mtr. (Net to net) 12 Terminals, Connectors 8 Nos. each (Net to Net) 1 No. 1 Cold Rolled Non-oriented (CRNO) Electrical Steel Sheets/ Sheets in Coil form gms/watt gms/watt CRCA Steel Sheets/ Sheets in Coilform 2 Copper Wire Bars/ Cathods/ 4.98 gms/watt Rods/ Winding Wires/ Strips 3 Electrolytic grade aluminium for Rotor 2.80 gms/watt 4 Commercial Grade Aluminium in 2.80 gms/watt C262

263 C1398 Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers Watts to 750 Watts Ingot form (Upto 99.5% purity) for Housing CRCA Sheets for Housing Mild Steel Sheets for Housing 5 EN-8 Alloy Steel for Shaft Stainless Steel for Shaft C gms/watt 4.88 gms/watt 1.98 gms/watt 6 Ball/ Sleeve/ Roller Bearings 2 Nos. (Net to net) 7 Composit insulation material consisting of paper, nylon, polyester, amide, nomex films, varnish, tape, polyester cord 8 Special packing material like Kraft Paper for exportworthy packing lables, name plate, ribbon 9 Motor Protectors/ Thermal Protectors/ Thermo Strips Upto 1.5% of FOB value of export. Upto 3% of FOB value of export Net to Net 10 Power Capacitor 1 No. (Net to net) 11 Plastic Insulated Wire/ Cable 6 Mtr. (Net to net) 12 Terminals, Connectors 8 Nos. each (Net to net) 1 No. 1 Cold Rolled Non-oriented (CRNO) Electrical Steel Sheets/ Sheets in Coil form CRCA Steel Sheets/ Sheets in gms/watt gms/watt Coil form 2 Copper Wire Bars/ Cathods/ 2.76 gms/watt Rods/ Winding Wires/ Strips 3 Electrolytic grade aluminium for Rotor 2.80 gms/watt 4 Commercial Grade Aluminium in 2.80 gms/watt Ingot form (Upto 99.5% purity) for Housing CRCA Sheets for Housing 4.20 gms/watt Mild Steel Sheets for Housing 4.88 gms/watt 5 EN-8 Alloy Steel for Shaft 1.98 gms/watt Stainless Steel for Shaft 6 Ball/ Sleeve/ Roller Bearings 2 Nos. (Net to net) 7 Composit insulation material consisting of paper, nylon, polyester, amide, nomex films, varnish, tape, polyester cord 8 Special packing material like Kraft Paper for exportworthy packing lables, name plate, ribbon 9 Motor Protectors/ Thermal Protectors/ Thermo Strips Upto 1.5% of FOB value of export. Upto 3% of FOB value of export. Net to net 10 Power Capacitor 1 No. (Net to net) 11 Plastic Insulated Wire/Cable 6 Mtr. (Net to net) 12 Terminals, Connectors 8 Nos. each (Net to net) C1399 Single Phase Shell 1 No. 1 Cold Rolled Non-oriented gms/watt

264 C1400 construction motors with aluminium or cast iron or sheet metal end covers Watts and above Bicycle Frames made of Aluminium C1401 Heat Recovery Wheel - Model HRW C1402 Industrial Heat Exchanger (Shell and Tube/ Plate/Spiral Type) (CRNO) Electrical Steel Sheets/ Sheets in Coil form CRCA Steel Sheets/ Sheets in Coil form 2 Copper Wire Bars/ Cathods/ Rods/ Winding Wires/ Strips 3 Electrolytic grade aluminium for Rotor 4 Commercial Grade Aluminium in Ingot form (Upto 99.5% purity) for Housing CRCA Sheets for Housing >Mild Steel Sheets for Housing C gms/watt 1.89 gms/watt 1.63 gms/watt gms/watt 2.44 gms/watt 2.83 gms/watt 5 EN-8 Alloy Steel for Shaft 1.18 gms/watt Stainless Steel for Shaft 6 Ball/Sleeve/ Roller Bearings 2 Nos. (Net to net) 7 Composit insulation material consisting of paper, nylon, polyester, amide, nomex films, varnish, tape, polyester cord 8 Special packing material like Kraft Paper for exportworthy packing lables, name plate, ribbon 9 Motor Protectors/ Thermal Protectors/ Thermo Strips Upto 1.5% of FOB value of export Upto 3% of FOB value of export. Net to net 10 Power Capacitor 1 No. (Net to net) 11 Plastic Insulated Wire/Cable 6 Mtr. (Net to net) 12 Terminals, Connectors 8 Nos. each (Net to net) 1 No. 1 Aluminium Tube of relevant size in terms of LD/OD kg/kg content in. 2 Filler Wire for Welding 2% of net weight of. 1 No. 1 Aluminium Foil 1.05 kg/kg content in 2 Molecular Sieve 3 Automised Net to net Activated Powder 3 Clear Waterbase Upto 5% of the FOB value of export 4 Adhesives in Liquid form Upto 5% of the FOB value of export 5 Thinner Upto 5% of the FOB Value of export 1 No. 1 Seamless Tubes 1.02 kg/kg content in 2 B Q plates 1.05 kg/kg content in 3 Stainless Steel Plates 1.05 kg/kg content in 4 Low Alloy Steel Plates 1.05 kg/kg content in 5 MiscellaneousItems: a) Stainless Steel Welding Electodes b) Carbon Welding Electrodes Upto 1% of the FOB value of export.

265 C1403 C1404 C1405 C1406 C1407 C1408 Aluminium cops Nut & Shaft Assy. for Automobile Disc Horn Stainless Steel Casseroles of various designs (based on non CFC PU Insulation) Cow Magnets/ pill Steel Cable Drum in various sizes 1 pc. 1 Aluminium Tubes/ Pipes 1.05 kg/kg content in 2 ABS Granules (Relevant Grade) 1.05 kg/kg content in 3 Nylon Granules (Relevant Grade) 1.05 kg/kg content in 4 CRCA Sheet 1.05 kg/kg. content in. 1 No. 1 SAE 8602 Bar/ Round 1.20 kg/kg content in 2 CRCA Sheet 1.05 kg/kg content in 3 Steel Ball Net to Net 1 No. 1 Spring Steel Strip 1.05 kg/kg content in 2 Bakelite insulating Strip 1.02 kg/kg content in 3 Stainless Steel Strips 3gms. 4 Spring Steel Strips 13gms. 5 Rivet Contacts. Net to net 6 CRCA Sheet 1.10 kg/kg content in 7 Copper Wire 1.02 kg/kg content in 8 Insulating Bush Net to Net 9 Adjusting Screw. Net to net 10 G.F. Nylon 66 (for manufacture of bobbin). C265 7gms. 11 Glass Filled Nylon kg/kg content in 12 Hydrophonic Filter Net to net 13 Nucleus 2 Nos. 1 kg. 1 Stainless Steel Coil of relevant grade (.3-.5 MM thickness) 1.30 kg/kg content in 2 Polyol kg of PU content in the export product 3 Isocynate (MDI) kg of PU content in the export product 4 ABS (Acrilonitrile Butadine Styrene) Plastic 1 No. 1 Rare Earth Magnet (7 gm each) (Relevant diameters) 2 Stainless Steel Casing 1 No. 3 M.S. Pole PCs (Centre) 1 No 4 M.S. Pole Pcs (Ends) 2 Nos. 1 Kg. 1 CRCA Non Alloy Steel Sheet/ Coil kg/kg content in 2 Nos kg/kg content in 2 H.R. Non Alloy Steel Sheet/ Coil 1.03 kg/kg content in 3 Non Alloy Steel Round Bar 1.02 kg/kg content in

266 C1409 C1410 C1411 C1412 C1413 C1414 C1415 C1416 C1417 C1418 C1419 C1420 C1421 C1422 Alloy Iron Powder Grade - FeCrMo (Cromaloy) Carbon/ Aloy Steel Seamless Tubes/ Pipes (Cold Finished) High Speed Steel (Non- Cobalt Grade) Tools Blanks (up to 15 mm dia) Deleted Deleted Lever Arch Mechanism (Index File Clip) with or 1000 Kgs. 1 M.S. Scrap 1085 kgs. 2 Low Carbon Ferro Chrome Lumps 3 Low Carbon Ferro Molybdenum 8 kg 1 MT 1 Carbon/ Alloy Steel Pipes/ Tubes (Hot Finished) Grade: ASTM A192 1 kg. 1 H.R Rod/Wire Rod of High Speed Steel (Non-Cobalt Grade) 1 Kg. 1 Cold Rolled Steel Strips/ Sheets (Coated or Uncoated) C kgs MT 1.10 kg/kg content in 1.40 kg/kg content in without Slide-in Plate 2 MS Wire Rod 1.05 kg/kg content in Cold Rolled Formed (Sections of Collapsible Gates) 1 MT 1 HR Coil 1.08 MT Alloy Iron Powder Grade 1 Kg. 1 M.S. Scrap 880 gms - FeCu 80:20 2 Oxygen Free High Conductivity 220 gms Copper Ingots / Cathodes /Billets / Scrap Deleted. Cast Iron Castings (Mini 1000 kgs. 1 Low Ash Metallurgical Coke 495 kgs blast Furnance and (Ash contents below 15%) Cupola route) 1 Core X 1000 Sq. mm 1 Km. 1 Aluminium rod E.C. grade 2745 kg. 1.1 KV Grade having 99.6% purity (min.) Aluminium XLPE 2 XLPE Compound 450 kg. insulated cable 3 PVC Resin 205 kg. Fine Cobalt Powder Grain size Micron Electrode Holder mainly made of Copper /Brass. Copper Conductors (continuously transposed containing 5 to 31 enamelled strips) 1 kg. 1 Cobalt Granules/ Cobalt Briquettes/Cobalt Cathodes Cobalt Chloride Solution containing Cobalt Metal 1.04 kg Kg. of Cobalt contained in Cobalt Chloride Solution 1 kg. 1 Copper ingots Brass Scrap 1.05 kg/kg content 2 Spring Steel wire 1.02 kg/kg content 3 M.S. Wire/ Rod 1.10 kg/kg content 4 CRCA Sheet 1.20 kg/kg content 5 ABS Moulding 1.05 kg/kg content 6 Silicon Rubber 1.05 kg/kg content 1 kg. 1 Cast Copper Rod (EC Grade) 1 kg. 2 Insulating Paper 7 gms 3 High density kraft paper 4 gms C1423 Aluminium bottles/ cans 1 MT 1 Aluminium Ingot 1.05 MT C1424 Woven Asbestos Free 1 kg. 1 Glass Rovings kg Clutch Facings 2 Nitrile Rubber kg

267 C1425 C1426 Insulated Adjacent Jumpers (25A, 1.34 gms. weight) G-DS Clamp Pole Grey C1427 Aluminium Conductor 1 Core X 630 Sq. mm 33 KV(E) ALXLPE PVC AWA PVC Cables C1428 Aluminium Conductor 3 Core X 150 Sq. mm 33 KV(E) ALXLPE PVC SAWA PVC Cables C1429 Aluminium Conductor 3 Core X 240 Sq.mm 33KV(E) ALXLPE PVC SAWA PVC Cables C1430 Aluminium Conductor 1 Core X 150 Sq. mm 11 KV(E) ALXLPE PVC AWA PVC Cables C1431 Aluminium Conductor 3 Core X 185 Sq. mm 11 KV(E) ALXLPE PVC SAWA PVC Cables C1432 Aluminium Conductor 1 Core X 150 Sq. mm 6.6 KV(E) ALXLPE PVC AWA PVC Cable 3 Phenol Formaldehyde Resin (Powder Phenol Resin) kg 4 Mangnesium Oxide kg 5 Potassium Titanate kg 6 Kevlar Dry Pulp kg. 1 No. 1 Copper contact 1 No. 2 Polyamide (6.6) Grey 1.08 gms. 1 No. 1 Wire Protect 2 Nos. 2 Contact Pin 2 Nos. 3 Screws 2 Nos. 4 Polyamide (6.6) Gredy 1.18 gms. 1 km. 1 EC Grade Aluminium Rods/ 2297 kgs. Ingots 2 Insulating Grade XLPE 1125 kgs Compound 3 Semi Conducting Grade XPLE Compound 346 kgs. 4 PVC Resin 685 kgs. 1 km. 1 EC Grade Aluminium Rods/ 1296 kgs. Ingots 2 Insulating Grade XLPE 2104 kgs. Compound 3 Semi Conducting Grade XPLE Compound 598 kgs. 4 PVC Resin 2255 kgs 1 km 1 EC Grade Aluminium Rods/ 2137 kgs. Ingots 2 Insulating Grade XLPE 2435 kgs. Compound 3 Semi Conducting Grade XPLE Compound 685 kgs. 4 PVC Resin 2617 kgs. 1 km. 1 EC Grade Aluminium Rods/ 735 kgs. Ingots 2 Insulating Grade XLPE 232 kgs. Compound 3 Semi Conducting Grade XPLE Compound 121 kgs. 4 PVC Resin 253 kgs 1 km. 1 EC Grade Aluminium Rods/ 1618 kgs. Ingots 2 Insulating Grade XLPE 765 kgs. Compound 3 Semi Conducting Grade XPLE Compound 402 kgs 4 PVC Resin 1330 kgs. 1 km. 1 EC Grade Aluminium Rods/ 712 kgs. Ingots 2 Insulating Grade XLPE Compound 172 kgs 3 Semi Conducting Grade XPLE 116 kgs. C267

268 C1433 Aluminium Conductor 3 Core X 150 Sq. mm 6.6 KV(E) ALXLPE PVC CSAWA PVC Cables C1434 Aluminium Conductor 3 Core X 185 Sq. mm 6.6 KV(E) ALXLPE PVC SAWA PVC Cables C1435 Aluminium Conductor 3 Core X 240 Sq. mm. 6.6 KV(E) ALXLPE PVC SAWA PVC Cables C1436 Aluminium Conductor 3 Core X 120 Sq. mm 6.6 KV(E) ALXLPE PVC CSAWA PVC Cables C1437 Aluminium Conductor 3 Core X 240 Sq. mm 11 KV(E) ALXLPE PVC SAWA PVC Cables C1438 Aluminium Conductor 3 Core X 95 Sq. mm 1.1 KV ALPVC PVC SWA PVC Cables C1439 Aluminium Conductor 3 Core X 120 Sq. mm 1.1 KVAL PVC PVCSWA PVC Cables C1440 Aluminium Conductor 3 Core X 150 Sq. mm KV ALPVC PVCSWA PVC Cables C1441 Aluminium Conductor 3 Core X 185 Sq. mm 1.1 KV ALPVC PVCSWA PVC Cables Compound 4 PVC Resin 239 kgs. 1 km. 1 EC Grade Aluminium Rods/ Ingots 2 Insulating Grade XLPE Compound 1296 kgs 527 kgs. 3 Semi Conducting Grade XPLE 335 kgs. Compound 4 PVC Resin 1086 kgs. 1 km. 1 EC Grade Aluminium Rods/ 1618 kgs Ingots 2 Insulating Grade XLPE 571 kgs. Compound 3 Semi Conducting Grade XPLE Compound 386 kgs 4 PVC Resin 1124 kgs. 1 km. 1 EC Grade aluminium Rods/ 2137 kgs Ingots 2 Insulating Grade XLPE 636 kgs Compound 3 Semi Conducting Grade XPLE Compound 430 kgs 4 PVC Resin 1347 kgs. 1 km. 1 EC Grade Aluminium Rods/ 1050 kgs Ingots 2 Insulating Grade XLPE 487 kgs. Compound 3 Semi Conducting Grade XPLE 329 kgs. 4 PVC Resin 920 kgs. 1 km. 1 EC Grade Aluminium Rods/ 2137 kgs Ingots 2 Insulating Grade XLPE 849 kgs Compound 3 Semi Conducting Grade XPLE Compound 446 kgs. 4 PVC Resin 1489 kgs. 1 km. 1 EC Grade Aluminium Rods/ 831 kgs Ingots 2 PVC Resin 506 kgs 1 km 1 EC Grade Aluminium Rods/ 1050 kgs Ingots 2 PVC Resin 589 kgs 1 km. 1 EC Grade Aluminium Rods/ 1296 kgs Ingots 2 PVC Resin 703 kgs 1 km 1 EC Grade Aluminium Rods/ 1618 kgs Ingots 2 PVC Resin 835 kgs C268

269 C1442 Aluminium Conductor 3 Core X 240 Sq. mm 1.1 KV ALPVC PVCSWA PVC Cables C1443 Aluminium Conductor 4 Core X 95 Sq. mm 1.1 KV ALPVC PVCSWA PVC Cables C1444 Aluminium Conductor 4 Core X 150 Sq. mm 1.1 KV ALPVC PVCSWA PVC Cables C1445 Aluminium Conductor 1 Core X 500 Sq. mm 1.1 KV ALPVC PVCSWA PVC Cables C1446 Aluminium Conductor 4 Core X 185 Sq. mm 1.1 KV ALPVC PVCSWA PVC Cables C1447 Aluminium Conductor 1 Core X 300 Sq. mm 1.1 C1448 C1449 C1450 C1451 C1452 C1453 C km. 1 EC Grade Aluminium Rods/ 2137 kgs Ingots 2 PVC Resin 1053 kgs 1 km. 1 EC Grade Aluminium Rods/ 1108 kgs Ingots 2 PVC Resin 648 kgs 1 km. 1 EC Grade Aluminium Rods/ 1728 kgs Ingots 2 PVC Resin 868 kgs 1 km. 1 EC Grade Aluminium Rods/ 1907 kgs Ingots 2 PVC Resin 668 kgs 1 km. 1 EC Grade Aluminium Rods/ 2158 kgs Ingots 2 PVC Resin 1082 kgs 1 km 1 EC Grade Aluminium Rods/ Ingots C kgs KV ALPVC PVC Cables 2 PVC Resin 460 kgs Aluminium Conductor 3.5 Core X 150 Sq. mm 1.1. KV ALPVC PVCSWA PVC Cables Aluminium Conductor 3.5 Core X 185 Sq. mm 1.1 KV ALPVC PVCSWA PVC Cables Aluminium Conductor 3.5 Core X 300 Sq. mm 1.1 KV ALPVC PVCSWA PVC Cables Aluminium Conductor 3.5 Core X 240 Sq. mm 1.1 KV ALPVC PVCSWA PVC Cables Aluminium Conductor 3.5 Core X 120 Sq. mm 1.1 KV ALPVC PVCSWA PVC Cables Aluminium Conductor 3.5 Core X 95 Sq. mm 1.1 KV ALPVC PVCSWA PVC Cables Aluminium Conductor 3.5 Core X 400 Sq. mm 1.1 KV ALPVC PVCSWA PVC Cables 1 km. 1 EC Grade Aluminium Rods/ 1496 kgs. Ingots 2 PVC Resin 806 kgs 1 km. 1 EC Grade Aluminium Rods/ 1895 kgs Ingots 2 PVC Resin 995 kgs 1 km. 1 EC Grade Aluminium Rods/ 3100 kgs Ingots 2 PVC Resin 1424 kgs 1 km. 1 EC Grade Aluminium Rods/ 2487 kgs Ingots 2 PVC Resin 1207 kgs 1 km. 1 EC Grade Aluminium Rods/ 1249 kgs. Ingots 2 PVC Resin 687 kgs 1 km 1 EC Grade Aluminium Rods/ 970 kgs Ingots 2 PVC Resin 587 kgs 1 km 1 EC Grade Aluminium Rods/ 3960 kgs. Ingots 2 PVC Resin 1779 kgs.

270 C1455 C1456 C1457 C1458 DT Plus Module With Protection Insert with Test Contact with Arrestor and Gel DT Plus Module with Protection Insert with Test Contact with Gel without Arrestor DT Plus Module without Protection Insert with Test Contact with Gel DT Plus with Earth Plate and with modified cable entry with DT Plus Module, Protection Insert, Test Contact and Arrestor with Gel 1 No. 1 Base Plate 1 No. 2 Connection Contact incoming 2 Nos. 3 Connection Contact outgoing 2 Nos. 4 Intermediate Plate 1 No. 5 Pressure Plate 1 No. 6 Screw M7X46X7 1 No. 7 Arrestor 1 No. 8 Santoprene gm 9 Makrolan Natural gm 10 Crastin FR- 850 Natural gms 11 Makrolan Green gms 1 No. 1 Base Plate 1 No 2 Connection Contact incoming 2 Nos 3 Connection Contact outgoing 2 Nos. 4 Intermediate Plate 1 No. 5 Pressure Plate 1 No. 6 Screw M7X46X7 1 No. 7 Santoprene gm 8 Makrolan Natural gm 9 Crastin FR Natural gms 10 Makrolan Green gms 1 No. 1 Base Plate 1 No 2 Connection Contact incoming 2 Nos. 3 Connection Contact outgoing 2 Nos. 4 Intermediate Plate 1 No. 5 Pressure Plate 1 No. 6 Screw M7X7X46X7 1 No. 7 Santoprene gm 8 Makrolan Natural gm 1 No. 1 Base Plate 1 No 2 Connection Contact incoming 2 Nos. 3 Connection Contact outgoing 2 No. 4 Intermediate Plate 1 No. 5 Pressure Plate 1 No. 6 Screw M7X46X7 1 No. 7 Arrestor 1 No. 8 ABS UV FR 1210 Black 71 gms 9 Santoprene gm 10 Makrolan Natural gm 11 Crastin FR Natural gms 12 Makrolan Green gms C No. 1 Base Plate 1 No. C270

271 C1460 C1461 C1462 C1463 C1464 C1465 C1466 C1467 DT Plus without Earth Plate and modified cable entry with DT Plus Module with Protection Insert, Test Contact with Gel DT Plus Module with Protection Insert with Test Contact with Arrestor without Gel Castor Wheels 2 Connection Contact incoming 2 Nos. 3 Connection Contact outgoing 2 Nos. 4 Intermediate Plate 1 No 5 Pressure Plate 1 No 6 Screw M7X46X7 1 No. 7 ABS UV FR 1210 Black 71 gms 8 Santoprene gm 9 Makrolan Natural gm 1 No. 1 Base Plate 1 No. 2 Connection Contact incoming 2 Nos. 3 Connection Contact outgoing 2 Nos 4 Intermediate Plate 1 No 5 Pressure Plate 1 No. 6 Screw M7X46X7 1 No 7 Arrestor 1 No 8 Santoprene gms 9 Makrolan Natural gm 10 Crastin FR Natural gms 11 Makrolan Green gms 1 No. 1 Relevant Ball/Taper Roller Net to net Bearing 2 Non-Alloy Steel Sheet/ Plate 1.10 kg/ kg content in 3 CRCA Sheet/ Coil (mm thick) 1.25 kg./ kg content in 4 Zinc 1% of net wt. of item No. 3 above. 5 SBR/Natural Rubber/ Cast Iron (Depending on type or wheel) Frame and Field 1 No. 1 Ferrite Magnets 6 Nos. Assembly for 1.5 KW 2 HR (Non-alloy) Steel Sheet/ Coil 498 gms Automobile Starter 3.5 mm thickness Motor 3 Spring Steel Sheet/ Coil ( gms mm thick) Complete Bicycle Along 1 No. 1 Deraileurs System & Chain 1 Set with Deraileur System & Chains Stainless Steel Interlock 1 MT 1 Stainless Steel Coil/ Sheet 1.25 MT Hose/ Hose Assembly Stainless Steel Bellow/ 1 MT 1 Stainless Steel Coil/ Sheet 1.46 MT Bellow Assembly Aluminium Grills Anodised Brake Drum made of Alloy Cast Iron (Rough Castings) 1.05 kg./ kg content in 1 kg. 1 Aluminium Ingots 1.06 kg/kg content in 1 kg. 1 Pig Iron kg 2 Steel Scrap kg 3 Ferro Alloys (Fe.Si., Fe.Mn., Fe.Cr.) kg C271

272 4 Metallurgical Coke 0.13 kg 5 Inoculant 25C & equivalent kg 6 Paints & Rust Preventive Oil kg Note: In the case of Machined Castings the above quantities of import items at each Sl.No. 1 to 5 are to be multiplied by factors as given below: a) Less than 10 kg/piece b)10 kgs. to 100 kgs/ piece C1468 C1469 C1470 C1471 C1472 C1473 C1474 C1475 C1476 C1477 C1478 C1479 Stainless Steel Dye Springs made Out of AISI 316 or AISI 304 Cistern Side Inlet valve, Cistern Bottom Inlet Valve, Cistern Outflow Valves Deleted. Finished Cup (Component of Tapered Roller Bearing) Split Retaining Rings of Cabbon Steel 1 kg. 1 Stainless Steel Wire (AISI 316 or AISI 304) of relevant Diameter C kg 1 kg. 1 St.Steel Rod 1.02 kg/kg content in 2 Polyacetal 1.15 kg/kg content in 3 Polypropylene 1.15 kg/kg content in 1000 Nos. 1 Forged/ Turned Outer Ring in unfinished condition (relevant size) 1 kg. 1 Carbon Steel plates of relevant Grade 1100 Nos kg (Galvanised) 2 Zinc 4% of the net weight of Steel in the export product. Split Retaining Rings of Stainless Steel in SS 516 or 340 Deleted Compressor Mounting Brackets/Hanger Brackets/ mounting Spring Brackets/ Overload Brackets Locating Cup/Muffler Assembly (Suction/ Discharge/ Shockloop Assy./ Protective Cover Bale Strap/ Discharge Valve retainer Phosphor Copper Manganese Copper 1 kg. 1 Stainless Steel of relevant Grade 1.05 kg. 1 kg. 1 CRCA Sheet/ Coil (prime/ Defective) 1 kg 1 CRCA Sheet/ Coil (Prime/ Defective) 1.30 kg/kg content in 1.25 kg/kg content in 1 kg. 1 Copper Cathodes/ Copper Wire Bars Copper Scrap kg kg 2 White/ Yellow Phosphorous kg 1 kg. 1 Copper Cathodes/ Copper Wire Bars Copper Scrap kg kg 2 Manganese kg Alloy Aluminium 1 kg. 1 Primary Unalloyed Conductor Steel a) Aluminium 1.02 kg/kg content in

273 C1480 Reinforced (AACSR) Washing Machine 28 Relevant insulated Copper Wire 0.5 mm dia C273 b) Magnesium 1.10 kg/kg content in c) Silicon Aluminium Alloy Ingots / Billets / T-Bars/ Sows/ Wire Rods kg/kg content in 1.01 kg/kg content in 2 High Carbon Steel Wire/ Rod 1.02 kg/kg content in 3 Zinc 4% of the weight of Steel Content 1 No. 1 Washer - P Net to Net 2 Belt. V Net to net 3 Door SW ASM Net to Net 4 Buzzer ASM Net to net 5 Capacitor Net to net 6 Gear Case Assembly Net to net 7 Plunger Valve Strap Net to net 8 Timers Net to Net 9 Block Brake Net to net 10 Motors (Relevant) Net to net 11 P.V. Bellow Net to Net 12 Net Net to net 13 Bellows ASM Net to net 14 Powder Cord Net to net 15 Adapter Net to net 16 Polypropylene Resin 1.04 Kg/Kg content in 16 Expanded Polysterene 1.02 kg/kg content in 17 Resin ABS 1.04 Kg/Kg content in 18 Galvanized Precoated Steel Sheet As per general note for packing material 19 High Impact Polystyrene 1.04 Kg/Kg content in 20 Aluminium Ingots 1.04 Kg/Kg content in 21 Styrene Acrylo Nitrile 1.04 Kg/Kg content in 22 Polyethylene Resin 1.04 Kg/Kg content in 23 Ethylene Vinyl Acetate 1.04 Kg/Kg content in 24 Polyacetal GC Kg/Kg content in 25 Polyester band Net to net 26 Nylon Cloth for Capicitor Cover Net to net 27 S.S. Sheet for flat spring Net to net 1.01 metre/ metre content in export

274 C1481 C1482 C1483 Battery Type NCSP-B D (Nickel Cadmium batteries) 24 Volts, 40 AH. Pneumatic Demolition Tool Pneumatic Tools Chipper - 1" to 4" Cylinder product 29 Relevant grease 4 gms/machine 30 Other relevant Components As per General Note No. 4 of Engineering Group 31 Expanded Polysterene 1.02 Kgs/Kg content in 1 No. 1 Nickel Fibremat Fibrex Nickel Powder 2 Nylon moulding granules/ powder 3 Nonwoven Separator (Viledon) FS Sq. ft kgs kgs sq. mtr 4 NIckel Powder type 255/287/ kgs 5 5 Celgard 3400 Flat sq. mtr. Sheet/Film. 6 Battery connector 1 No. 7 Metregrip 303 LV epoxy adhesive activator 0.50 ltrs. 8 Metregrip 303 LV Epoxy 0.50 ltrs. Adhesive base 1 No. 1 Valve Assembly & Case One No. Each on net to net basis 2 Valve Case Cover 3 Valve 4 Valve Case Spacer 5 Retainer latch 6 Bushing Latch 7 Back Head Complete 8 Throttle Lever 9 Front Head 10 Front Head Spring 11 Front Head Bold 12 Retainer Latch Pin (outer) 13 Air Inlet Nut 14 Anvil Block 15 Anvil Block Bushing 16 Piston 17 Back Head Bolt 18 Air Inlet Swivel 19 Cyliner 20 Retainer Latch Pin (inner) 1 No. 1 Throttle Valve One No. each on net to net basis. 2 Throttle Valve Tube 3 Bushing Permanent 4 Throttle Lever C274

275 C1484 C1485 C1486 C1487 ALPVCP VCSWP VC(1.1 kv) ALPVCSWPVC (1.1 kv) ALPVCPVCSWP VC(1.1 kv) Earth Moving Wheels having dia not less then 25" 3x240 Sq. mm 1x150 Sq. mm 3.5x95 Sq. mm 5 Handle 6 Upper Valve case Lid 7 Valve Case 8 Piston 9 Cylinder 10 Retainer 11 Bushing-Round/ Hex 12 Collar Lock 13 Exhaust Shield 1 Al. Ingot/ Rod kg. per m 2 PVC Resin kg. per m 3 DIDP.3786 kg. per m 1 Aluminium Ingot/ Rod kg. per m 2 PVC Resin kg. per m 3 DIDP.0774 kg. per m 1 Al. Ingot/ Rod kg. per m 2 PVC Resin kg. per m 3 DIDP.218 kg. per m 1 No. 1 HR Plate/ HR Plate in coil form 1.20 kg/kg content in the export prouct. 2 HR Sections 1.09 kg/kg content in the export prouct. 3 Billet 1.20 kg/kg content in the export prouct. 4 Paint 5 Thinner 6 Welding wire 7 Flux Note: 1. CIF value of Import item No. 4&5 taken together shall be restricted to 3% of FOB vaslue of export. 2. Quantity of import item No. 6&7 taken together limited to 3% of weight of Steel to be welded. C1488 Deleted C1489 C1490 Rear Axle Housing Assembly for LCV/HCV Finned Tubes 1 kg. 1 H.R. Steel Plates/Coils (8 mm to 15 mm) 2 Forgings (Machined) Forgings (Rough) Non alloy/alloy steel bars/rods/billets/blooms/ingots. 1 MT 1 Seamless Steel/ ERW tubes or pipes 2 CRSS/HRSS/ CRCS/ HRCS strips or coils C kg. 1 Iron Powder Atomised kg 1.83 kg/kg content in Net to net or 1.47Kg/Kg content in Or 1.70Kg/Kg content in MT/MT content in MT/ MT content in the export product. C275

276 C1492 C1493 Sintered Bronze Bushes & Part EP Grade Cold Rolled Grain Oriented Silicon Electrical Steel Sheets/ Coils Pneumatic Tool (Air Hoists) upto 1000 kg. lifting capacity 2 Copper Mill Scale kg 3 Solid Lubricant Powder kg. 4 Lubricating Oil kg. 1 MT 1 Hot Rolled Silicon Electrical 1180 kgs. Steel Wide Coils of relevant Grade containing 2.5% - 3.5% Silicon 2 Mgo Powder for coating 4.2 kgs. 3 IN-Organic Coating (Remisol 10 kgs. coating liquid/ corrosive liquid) 4 Picking Oil 0.5 kg. 5 Steel Strapping As per packing policy 6 VCI Rusto paper As per packing policy 1 No. 1 Relevant Ball Bearing 4 Nos. 2 Relevant Chain Link 1 No. 3 Relevant Cap Brake 1 No 4 Frame 1 No. 5 Gear Internal 1 No. 6 Liner 1 No. 7 Motor Housing 1 No. 8 Muffler 1 No. 9 Retainer Body 1 No. 10 Shaft-Sprocket 1 No. 11 Shaft-Rotor 1 No. 12 Sprocket (4 pocket) 1 No. 13 Washer 1 No. 14 Sprocket (6 pockets) 1 No. Note: (i) Import item at Sl.No. 14 shall be allowed only if s has a lifting capacity of ( Kgs).(ii) Import shall be permitted on net to net basis with accountability clause. C1494 Pneumatic chipper with cylinder Bore Chrome Lined 1" to 4" Cylinder 1 No. 1 Relevant Throttle Valve One No. each (with accountability clause). On net to net basis 2 Relevant Throttle Valve tube 3 Relevant Bushing permanent 4 Relevant Lever Throttle 5 Relevant Lid-Upper Valve case 6 Relevant Case Valve 7 Relevant Lid lower valve case 8 Relevant Collar Lock 9 Relevant Exhaust Shield 10 Relevant Handle 11 Relevant Retainer (Chisel sleeve) 12 Relevant Cylinder (Chrome Lined Bore) 13 Relevant Piston C276

277 C1495 C1496 Pneumatic Tool Heavy Duty Air Hoist - Rated Capacity above 909 kg. (2000 pounds) up to and including 1818 kg. (4000 pounds). Pneumatic Tool Heavy Duty Air Hoist - Rated Capacity above 455 kg. (1000 pounds) upto and including 909 kg. (2000 pounds). 1 No. 1 Relevant Chain Load 1 No. 2 Relevant Guide- Chain 1 No. 3 Relevant Handle 1 No. 4 Relevant Motor Housing 1 No 5 Relevant Limit Stop 1 No 6 Relevant Cover Worm Gear 1 No. 7 Relevant Cover Motor 1 No. 8 Relevant Cover Spur Gear 1 No. 9 Relevant Yoke 1 No. 10 Relevant End Plate Upper 1 No. 11 Relevant End Plate Lower 1 No. 12 Relevant Liner 1 No. 13 Relevant Self Lubricanting Bush 2 Nos. 14 Relevant Chain Handle 1 No. 15 Relevant Handle 1 No. 16 Relevant Worm 1 No. 17 Relevant Worm Gear 1 No. 18 Relevant Throttle Lever 3 Nos. 19 Relevant Gasket 7 Nos. 20 Relevant Strainer Air 1 No 21 Relevant Muffler 1 No. 22 Relevant Suspension Bail 1 No. 23 Relevant Hose Clamp 3 Nos. 24 Relevant Needle Bearing 2 No. 25 Relevant Ball Bearing 6 Nos. 26 Relevant Block Assembly Bott. 1 No. 1 No. 1 Relevant Chain Load 1 No. 2 Relevant Guide- Chain 1 No. 3 Relevant Motor Housing 1 No. 4 Relevant Limit Stop 1 No. 5 Relevant Chain Guide 1 No. 6 Relevant Valve Housing 1 No. 7 Relevant Cover Worm Gearing 1 No. 8 Relevant Cover Motor Hook 1 No. 9 Relevant Cover Spur Gearing 1 No. 10 Relevant End Plate Upper 1 No. 11 Relevant End Plate Lowder 1 No. 12 Relevant Liner 1 No. 13 Relevant Valve Throttle 1 No. 14 Relevant Self Lubricating Bush 2 Nos. 15 Relevant Hook (Bare) 1 No. 16 Relevant hook Bare 1 No. C277

278 C1497 C1498 Pneumatic Tool Scabbler with 3000 BPM (Blows per minute) Pneumatic Tool Hand Drill with Drilling Diameter upto 1-1/4" (one and a quarter inch) with muffler 17 Relevant Chain Handle 1 No. 18 Relevant Handle 1 No. 19 Relevant Worm 1 No. 20 Relevant Work Gear 1 No. 21 Relevant Throttle Lever 2 Nos. 22 Relevant Gasket 7 Nos. 23 Relevant Strainer Air 1 No. 24 Relevant Muffler 1 No. 25 Relevant Needle Bearing 2 Nos. 26 Relevant Ball Bearing 7 Nos. 1 No. 1 Relevant Cap Cylinder 1 No. 2 Relevant Piston & Carbide tip assembly C278 3 Nos. 3 Relevant Cylinder 1 No. 4 Relevant Handle Bent 1 No. 5 Relevant Handle Cylinder 1 No. 6 Relevant Bushing Cylinder 3 Nos. 7 Relevant Bushing Reducer 1 No. 8 Relevant Throttle Valve Lever 1 No. 9 Relevant Throttle Valve Body 1 No. 10 Relevant Throttle Valve 1 No. 11 Relevant Air Strainer 1 No. 1 No. 1 Relevant Air Inlet Bushing 1 No. 2 Relevant Throttle Valve Bushing 1 No. 3 Relevant Throttle Lever 1 No. 4 Relevant Pipe Plug 1 No. 5 Relevant Handle (Bare) 1 No. 6 Relevant Through Bolt 2 Nos. 7 Relevant Air Tube comp 1 No. 8 Relevant Cylinder bush 1 No. 9 Relevant Cylinder 1 No. 10 Relevant Piston 1 No. 11 Relevant Front Valve seat 1 No. 12 Relevant Valve 1 No. 13 Relevant Rear Valve seat 1 No. 14 Relevant wire retainer 1 No. 15 Relevant front head 1 No. 16 Relevant Chuck 7/8" hex 1 No. 17 Relevant Chuck Sleeve 1 No. 18 Relevant Plunger shifter 1 No. 19 Relevant Ratchet ring 1 No. 20 Relevant Pawl 2 Nos. 21 Relevant Shifter Sleeve 1 No.

279 C1499 C1500 C1501 C1502 C1503 C1504 Pneumatic Tool Scabbler with 2900 BPM (Blows per Minute) per piston. Pneumatic Tool Hand Drill with Drilling Diameter upto 1-1/4" (one and a quarter inch) without muffler Low Carbon Ferro Manganese Medium Carbon Ferro Manganese Continuous cast copper rod/copper wire rod/cathode Cold Rolled Non Grain oriented Silicon electrical Steel Sheet/ Coils in fully/ semi processed state 22 Relevant Muffler complete 1 No. 1 No. 1 Relevant Piston & Carbide tip assembly C279 3 Nos. 2 Relevant Cylinder 1 No. 3 Relevant Live air Handle 1 No. 4 Relevant Throttle Valve 1 No. 5 Relevant Air Inlet Nipple 1 No. 6 Relevant Dead handle 1 No. 1 Relevant Air Inlet Bushing 1 No. 2 Relevant Throttle Valve Bushing 1 No. 3 Relevant Throttle Lever 1 No. 4 Relevant Pipe Plug 1 No. 5 Relevant Handle (Bare) 1 No. 6 Relevant Through Bolt 2 Nos. 7 Relevant Air tube comp 1 No. 8 Relevant Cylinder bush 1 No. 9 Relevant Cylinder 1 No. 10 Relevant Piston 1 No. 11 Relevant Front Valve seat 1 No. 12 Relevant Valve 1 No. 13 Relevant Rear Valve seat 1 No. 14 Relevant wire retainer 1 No. 15 Relevant front head 1 No. 16 Relevant Chuck 7/8" hex 1 No. 17 Relevant Chuck Sleeve 1 No. 18 Relevant Plunger shifter 1 No. 19 Relevant Ratchet ring 1 No. 20 Relevant Pawl 2 Nos. 21 Relevant Shifter Sleeve 1 No. 22 Relevant Hose tail 1 No. 1 MT 1 Aluminium Ingot/ Aluminium Powder 1 MT 1 Aluminium Ingot/ Aluminium Powder 500 kgs. 250 kgs. 1 MT 1 Copper Concentrate 1.06 MT Copper content in Copper Concentrate/ MT of kg. 1 Hot Rolled Silicon Electrical 1125 kg Steel Wide Coils of relevant grade containing 0.60% to 3.4% Silicon with varying quantity of Aluminium 2 Organic Coating/ Inorganic 5 kgs. Coating 3 Pickling Oil 0.5 kg. 4 Steel Stripping As per packing

280 C280 Policy 5 VCI Rusto paper As per packing policy 6 Cold Rolling Mill Rolls 1.00 kg 7 Mineral Based Rolling Oil 0.35 kg Note: Import item No.2 will not be allowed if is CRNO in Semi processed state. C1505 C1506 C1507 Hermatic Compressor Identifiable ready-to-use machined parts/ components made wholly or predominantly of Carbon Steel/ Non Alloy Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel/ Stainless Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified 1 No. 1 Relevant Valve Plate 1 No. 2 Relevant Gas Pump assembly 1 No. 3 Crankshaft Assembly 1 No. 4 Suction Valve 1 No. 5 Discharge Valve 1 No. 6 Cylinder Head 1 No. 7 Stator 1 No. 8 PTC Relay below 7 AMP 1 No. 9 Bi-metal thermostat/ motor protector 1 Kg. 1 Forging Quality Carbon Steel/ Non Alloy Steel Bars/ Rods/ Billets/ Blooms/ Ingots (Relevant Material) 2 Chemicals Rust Preventing Oil/ Primer/ Paints 3 Misc.items: Refractory material, Die Steel/ Die Blocks, Cutting Tools, Cutters Sawing Blades including bimetallic Bandsaw blades steel shots, fuel oil, heat treatment chemicals, quenching oil and lubricants 1 kg. 1 Forging Quality/ Alloy Steel/ Stainless Steel Bars/ Rods/ Billets/ Blooms/ Ingots (Relevant Material) 2 Chemicals: Rust Preventing Oil/Primer Paints 3 Misc. Items: Refractory material, Die Steel/ Die Blocks Cutting Tools, Cutters, Sawing Blades including bimetallic Bandsaw blades steel shots, fuel oil, heat treatment chemicals, quenching oil and lubricants. 1 No kg/kg content in export 2% of the FOB value of export 4% of the FOB value of exports 1.60 kg/kg content in export. 2% of the FOB value of exports. 4% of the FOB value of exports C1508 Identifiable ready to use machined parts/ components made wholly or predominantly of Iron (not less than 90% by weight) manufactured through casting process, not elsewhere specified 1 kg 1 Pig Iron 1.25 kg. Note: The above norms are for wholly made of Pig iron. For constituting Pig Iron less than 100% and upto 90% by weight, the import requirement of Pig iron shall be proportionately reduced. C1509 Identifiable ready to use machined parts/ 1 MT 1 Major Raw materials comprising of Carbon Steel/ Non-Alloy Steel 1700 kgs.

281 components made wholly or predominantly of Carbon Steel/ Non Alloy Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified C281 Melting Scrap 2 Additives comprising of: 50 kgs. a) Core Wire/ Scrap/ Ingots/ Shots of Aluminium b) Core Wire/ Lumps Powder of Calcium Silicide (CaSi) c) Lumps/ Powder of Misch Metall d) Ferro Silicon e) Ferro Manganese 3 Miscellaneous items: a) i)resin Coated Sand ii) Organic binders b) i) Graphite electrode ii)welding Electrode iii) Mould Wash/ Mould coat iv) Grinding Wheel v) Refractories: a) Porous Plugs/ Seat Blocks/ Sleevers/ Slide Gate Plates b) Direct Bonded Basic Bricks c) Monolithic/ Gunning/ Ramming/ Castables d) Dolomite/ Magnesia Carbon Bricks vi) Industrial X-Ray Film (Various Grades for Gamma Rays Iridium 192 & Cobalt 60) 4 Furnace Oil/ Diesel Oil for i) Ladle heating ii) Moulding Heating iii) Heat Treatment 450 kgs 200 kgs. 7.5 kgs 12.5 kgs 31 kgs 6kgs 37.5 kgs 9440 Sq. Cm. 265 Ltrs. 1. The above norm is applicable only if s are manufactured through electric Arc Furnace/ Induction Finance Route using melting Scrap as Shown at item No. 1(a)2. In case the products are manufactured through the Induction Furnace route,item 3(b)(i) will not be allowed 3. The above norms are for wholly made of Non Alloy Steel. For constituting less than 100% and upto 90% Non Alloy Steel by weight,the import requirements of import items at S.No. 1 to 3 shall be proportionately reduced. C1510 Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel (other than Stainless Steel) (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified 1 MT 1 Major Raw Materials comprising of: a) Non-Alloy Steel Melting Scrap 1594 kgs b) Ferro Alloys comprising of: i) Charge Ferro Nickel/ Nickel Oxide Sinter Nickel ii) Ferro Chrome iii) Ferro Manganese iv)ferro Molybdenum v) Ferro Silicon 2 Additives comprising of: a) Core wire/ Scrap/ Ingots/ shots of Aluminium b) Calcium silicide (CaSi) c) Selenium d) Lumps/ Powder of Misch Metal 3 Miscellaneous items a) i) Resin coated Sand ii) Organic binders 75 kgs 30 kgs 21 kgs 25 kgs 31 kgs 25 kgs 6 kg 450 kgs 200 kgs

282 C1511 Identifiable ready to use machined parts/ components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified b) i) Graphite Electrode ii) Welding electrode iii) Mould Wash/ Mould Coat iv) Grinding Wheel v) Refractories a) Porous Plugs/ Seat Blocks/ Sleeves/ Slide Gate Plates b) Direct Bonded Basic Bricks c) Monolithic/ Gunning/ Ramming/ Castables d) Dolomite/ Magnesia Carbon Bricks C kgs kgs 31 kgs 6 kgs 37.5 kgs vi) Industrial X-Ray Film 9440 Sq. Cm. (various Grades for Gamma Rays Iridium 192 & Cobalt 60) 4 Furnace Oil/ Diesel Oil for i) Ladle Heating ii) Mould Heating iii) Heat treatment 265 Ltrs. 1 MT 1 Major Raw Materials comprising of: a) Stainless Steel Melting Scrap kgs b) Iron Flakes/ Pure Iron/ Iron Powder c) i) Ferro Chrome ii)charge Nickel Oxide Sinter/ Ferro Nickel c)i) Ferro Chrome ii)nickel iii) Ferro Manganese iv)ferro Molybdenum v) Ferro Silicon 2 Additives comprising of : a) Core wire/ Scrap/ Ingots/ Shots of Aluminium b)core wire/ Ingots/ powder of CalciumSilicide(CaSi) c) Selenium d) Lumps/ Powder of Misch Metal 3 Miscellaneous items: a) i) Resin coated Sand ii)organic binders b) i) Graphite Electrode ii) Welding electrode iii) Mould Wash/ Mould Coat iv) Grinding Wheel v) Refractories a) Porous Plugs/ Seat Blocks/ Sleeves/ Slide Gate Plates b) Direct Bonded Basis Bricks c)monolithic/ Gunning/ ramming/ Castables d) Dolomite/ Magnesia Carbon Bricks kgs 400 kgs 87.5 kgs kgs 12.5 kgs 62.5 kgs 25 kgs 6.25 kgs kgs 200 kgs 7.5 kgs 12.5 kgs kgs 6.25 kgs 37.5 kgs vi) Industrial X-Ray Film 9440 sq. cm (various Grades for Gamma Rays Iridium 192 & Cobalt 60) 4 Furnace Oil/ Diesel Oil for i) 265 Ltr. Ladle Heating ii) Mould Heating iii) Heat Treatment

283 Note: The above norm is applicable only if are manufactured through Electric Arc Furnace/ Induction furnace Route using Melting Scrap as shown at item No. 1(a)2. In case the products are manufactured through the induction Furnace route,item 3(b)(i) will not be allowed. 3. The above norms are for wholly made of Stainless Steel. For constituting Stainless Steel less than 100% and upto 90% by weight, the input requirements of import items a. No. 1 to 3 shall be proportionately, reduced. C1512 Refrigerator Display Cabinet (Capacity to be Indicated) 1 No. 1 Electro Galvanised Steel sheets pre-painted 0.5 mm thick 2 Relevamt Stainless steel sheet 0.4 mm thick 3 ABS/HIF with GPPS (General Purposel poly sheets) 4 Polyurethane foam chemical total foam weight:- a) Polyol b) Isocyanate 1.03 kg/kg content in 1.03 kg/kg content in 1.03 kg/kg content in 1.03 kg/kg content in 1.03 kg/kg content in 1.03 kg/kg content in C1513 Pneumatic Tool-Clay Digger (Picks) with outside Trigger, Throttle Latch Retainer c) Cyclo-pentane 5 Relevant Hermetically sealed compressors 6 Relevant Fan Motors a)evaporator cooling C283 b) Compressor/ condensor cooling 7 Relevant thermostate 1 No. One set (Net to Net) On net to net basis On net to net basis 8 Copper tube 6.350x0.6 mm thick 1.03 kg/kg content in 9 Copper capillary tube 1.03 kg/kg content in 10 Relevant Filter Drier (Copper) 1 No. 11 Relevant Evaporator (cu tube, Al fin) 1 No. 12 Relevant Condensor (cu tube, Al 1 No. fin) 1 No. 1 Relevant Air Inlet Nipple 1 No. 2 Relevant Head Bolt 1 No. 3 Relevant Piston 1 No. 4 Relevant Cylinder 1 No. 5 Relevant Fronthead 1 No. 6 Relevant Throttle Valve 1 No. 7 Relevant Latch Retainer Bolt 1 No. 8 Relevant Valve Block 1 No. 9 Relevant Valve 1 No. 10 Relevant Chuck bushing 1 No. 11 Relevant Retainer-Latch 1 No. 12 Relevant Lever - Throttle Valve 1 No. 13 Relevant Handle Assembly 1 No.

284 C1514 C1515 Pneumatic Tool-Light Simplate Valve Temper with Bore and Stroke size 1 7/16"X6" (36.5 mm X mm) Pneumatic Tool Heavy duty Ring volve Temper with Bore and Stroke size upto 2 1/4" X 6" (two and quarter inch X six inch) (57.2 mm X 152 mm) 14 Relevant Latch Ret Bolt Bushing 1 No 1 Relevant Elbow 1 No. 2 Relevant Air Strainer 1 No. 3 Relevant throttle valve Lever 1 No. 4 Relevant throttle valve Body 1 No. 5 Relevant throttle Valve 1 No. 6 Relevant Nipple 1 No. 7 Relevant Cylinder Head Assembly 1 No. 8 Relevant Oil Regulating Plug 1 No. 9 Relevant Upper Valve case Lid 1 No. 10 Relevant Valve case 1 No. 11 Relevant Lower Valve case lid 1 No. 12 Relevant Exhaust Deflector 1 No. 13 Relevant Piston with Plug Assembly 1 No. 14 Relevant Cylinder 1 No. 15 Relevant Retainer Nut 1 No. 16 Relevant Retainer 1 No. 17 Relevant Piston Rod Bushing 1 No. 18 Relevant Piston PKG 1 No. 19 Relevant Piston Bushing 1 No. 20 Relevant aluminium Butt 1 No. 21 Relevant Lock nut 1 No. 1 No. 1 Relevant Streat Elbow 1 No. 2 Relevant Air Strainer 1 No. 3 Relevant Throttle Valve Lever 1 No. 4 Relevant Throttle Valve Body 1 No. 5 Relevant throttle Valve 1 No. 6 Relevant Nipple 1 No. 7 Relevant Cylinder Head 1 No. Assembly 8 Relevant Valve Lid 1 No. 9 Relevant Valve 1 No. 10 Relevant valve Box 1 No. 11 Relevant Lock Clip 1 No. 12 Relevant Exhaust Clip 1 No. 13 Relevant Piston with Plug 1 No. Assembly 14 Relevant Cylinder & Bushing 1 No. Assembly 15 Relevant Piston Packing 1 No. 16 Relevant Lock Clip 1 No. 17 Relevant Piston Gland nut 1 No. 18 Relevant Piston Gland Sleeve 1 No. C284

285 C1516 C1517 C1518 Pneumatic Tool Rammer Pneumatic Tool Clay Digger round (picks) with outside trigger Sleeve Retainer and round/ Square Chuck Submerssible Water Pump of various Horse Powers (HP) 19 Relevant Butt 1 No. 20 Relevant Lock Nut 1 No. 1 No 1 Relevant Valve 1 No. 2 Relevant Throttle valve lever 1 No. 3 Relevant Throttle Valve Bushing 1 No. 4 Relevant Cylinder Head 1 No. 5 Relevant Upper Valve Case Lid 1 No. 6 Relevant Valve Case 1 No. 7 Relevant Lower Valve Case Lid 1 No. 8 Relevant Piston & Plug Assembly 9 Relevant Cylinder & Bushing Assembly C285 1 No. 1 No. 10 Relevant Bushing 1 No. 11 Relevant Piston Packing 1 No. 12 Relevant Piston Bushing 1 No. 13 Relevant Check Nut 1 No. 14 Relevant retainer 1 No. 15 Relevant Rubber Butt 1 No. 1 No. 1 Relevant Cylinder 1 No. 2 Relevant Sleeve 1 No. 3 Relevant Handle & Bush Assembly 1 No. 4 Relevant Lever 1 No. 5 Relevant Lever Pin 1 No. 6 Relevant Throttle Valve 1 No. 7 Relevant Retainer sleeve 1 No. 8 Relevant Valve 1 No. 9 Relevant Piston 1 No. 10 Relevant Upper Valve Case Lid 1 No. 11 Relevant Lower Valve Case Lid 1 No. 12 Relevant Valve Case 1 No. 13 Relevant Back Head Bolt 2 Nos. 1 No. 1 Bronze Metal kg/hp 2 C.I. Casting Pig Iron 0.86 kg/hp 1.12 kg/hp 3 ERWSS Tube/ Rod Grade AISI 304/ 316/ kg/hp 4 Relevant Rubber/ Plastic Parts Net to Net C1519 Submerssible Water 1 No. 1 Copper Rod/ Winding Wire or Motor of various Horse Copper Wire Bar Powers (HP) 2 Stampings CRNGO Steel Sheet/ Coil/ Strips C1520 Auto Transformers 1 No. 1 CRGO steel laminations/ Sheets/ Coils/ Slits/ Cuts kg/hp 1.47 kg/hp 2.62 kg/hp 2.11 kg. per KVA

286 C1521 C1522 C1523 (Variable Voltage) (b) Above 30 KVA I phase or 90 KVA 3 phase and upto 130 KVA I phase or 390 KVA 3 phase Auto Transformers (Variable Voltage) (c) Above 130 KVA I phase or phase Pneumatic Tool-Balancer with balance Capacity above 75 1b (34.1Kg) upto and including 210 1b (95.5Kg) Pneumatic Tool-Clay Digger/Utility Hammer (picks) Latch Retainer with Chuck 7/8"hex X 3 1/4" (22.2mm X 82.6mm) without muffler. 2 Copper winding wires/ Strips/ Wire bars/ Wire Rods/ Cathodes 3 Carbon in brushes/ Blocks/ Roller 0.77 kg per KVA 5.0 Cub. Cm. per KVA 4 Brush Holder assembly Net to net 5 Servo Motor Magnets for Motors Net to net 1 kg 1 CRGO Steel laminations/ Sheets/ Coil/ Slits/ Cuts 2 Copper winding wires/ strips/ Wire bars/ Wire Rods/ Cathodes 3 Carbon in brushes/ Blocks/ Rollers 1.71 kg per KVA 0.6 kg per KVA 5.0 Cub.Cm. per KVA 4 Brush Holder assembly Net to net 5 Servo Motor Magnets for Motors Net to net 1 No. 1 Relevant Bearing Ball 1No. 2 Relevant Gear Worm 1No 3 Relevant Shaft-Worm Gear 1No. 4 Relevant Retainer ball (thrust) 1No 5 Relevant Race Retainer 1No 6 Relevant Ball Race 1No. 7 Relevant Worm 1No 8 Relevant Ball Bearing 1No 9 Relevant Guide Plate 1No. 10 Relevant Stop Shield 1No. 11 Relevant Housing Cable Drum 1No. 12 Relevant Stop Assembly 1No. 13 Relevant Hook Assembly Swivel 1No 14 Relevant Housing Cover 1No. 15 Relevant Cover 1No. 16 Relevant Hub-main Spring 2No. 17 Relevant Asembly main spring 2No. and retainer 18 Relevant Hook 1No. 19 Relevant Cable 1No. 20 Relevant Clamp Cable 1No. 21 Relevant Separator Plate 1No. 22 Relevant Housing Cable Drum 1No. 23 Relevant main spring anchor 1No. 1 No. 1 Relevant Cylinder 1No. 2 Relevant Sleeve 1No. 3 Relevant Retainer Latch 1 No. 4 Relevant Latch Bushing 1No. 5 Relevant Handle & Bush 1No. Assembly 6 Relevant Lever Chit 1No. 7 Relevant Lever Pin 1No. C286

287 C1524 C1525 Pneumatic Tool-Clay Digger/Utility Hammer (Picks) Latch Retainer with Chuck 7/8"hex X 3 1/4" (22.2 mm X 82.6 mm) with muffler. Pneumatic Tool-Balancer with balance capacity upto 75 1b (34.1Kg) 8 Relevant Throttle Valve 1No. 9 Relevant Retainer Latch Pin 1No. 10 Relevant Valve 1No. 11 Relevant Piston 1No 12 Relevant Upper Valve case Lid 1No. 13 Relevant Lower Valve case Lid 1No. 14 Relevant Valve case 1No. 15 Relevant Back Head Bolt 2Nos. 1 No. 1 Relevant Cylinder 1No. 2 Relevant Sleeve 1No. 3 Relevant Retiner Latch 1No. 4 Relevant Latch Bushing. 1No. 5 Relevant Handle & Bush Assembly C287 1No. 6 Relevant Lever Chit 1No. 7 Relevant Lever Pin 1No. 8 Relevant Throttle Valve 1No. 9 Relevant Retainer Latch Pin 1No. 10 Relevant Valve 1No. 11 Relevant Piston 1No. 12 Relevant Upper Valve case Lid 1 No. 13 Relevant Lower Valve case Lid 1No. 14 Relevant Valve Case 1 No. 15 Relevant Back head Bolt 2Nos. 16 Relevant Hook Muffler complete 1 No. 1No. 1 Relevant Main Spring Anchor 1No. 2 Relevant Bearing Ball 1No. 3 Relevant Drum Cable Assembly 1No. 4 Relevant Gear Worm 1No. 5 Relevant Shaft-Worm Gear 1No. 6 Relevant Retainer Ball (Thrust) 1No. 7 Relevant Race Retainer 1No. 8 Relevant Ball race 1No. 9 Relevant Worm 1No. 10 Relevant ball Bearing 1No. 11 Relevant Guide Plate 1No. 12 Relevant Stop Shield 1No. 13 Relevant Housing Cable Drum 1No. 14 Relevant Stop Assembly 1No. 15 Relevant Hook Assembly Swivel 1No. 16 Relevant Cover 2Nos. 17 Relevant Hub-Main spring 1No. 18 Relevant Assembly main spring 1No.

288 C1526 Pneumatic Tool- Reversible Drill with the speed of 350 R.P.M. and above upto including 750 R.P.M. and retainer 19 Relevant Hook 1No. 20 Relevant Cable 1No. 21 Relevant Clamp Cable 1No. 22 Relevant Latch 1No. 1No. 1 Relevant Air Handle Cap 1No. 2 Relevant Valve 1No. 3 Relevant Live Air Handle Sleeve 1No. 4 Relevant Governor Plunger 1No. 5 Relevant Governor Stop Pin 1No. 6 Relevant Governor Bushing 1No. 7 Relevant Governor Weight 2Nos. 8 Relevant Governor Body 1No. 9 Relevant governor pin 1No. 10 Relevant Reverse Sleeve 1No. 11 Relevant Ball Bearing 2Nos. 12 Relevant Dead Handle 1No. 13 Relevant Universal Joint 1No. 14 Relevant Round Plug 1No. 15 Relevant Ball Bearing 1No. 16 Relevant Liner 1No. 17 Relevant Rotor 1No. 18 Relevant Spindle Collar 1No. 19 Relevant End Plate 1No. 20 Relevant Spindle Gear 1No. 21 Relevant Gear Case 1No. 22 Relevant Collar 1No. 23 Relevant Gear Pinion 1No. 24 Relevant Ball Bearing 2Nos. 25 Relevant Sleeve 1No 26 Relevant Oil regulating Plug 1No. 27 Relevant Dowel 1No. 28 Relevant Muffler Cover 1No. 29 Relevnt Feed Post 1No. 30 Relevant Bearing 1No. 31 Relevant Feed Sleeve Handle 1No. 32 Relevant Transfer Plate 1No. 33 Relevant Cylinder Cap 1No. 34 Relevant spindle 1No. 35 Relevant Feed Sleeve Centre 1No. 36 Relevant Feed Sleeve 1No. 37 Relevant Socket Shank 1No. C288

289 C1527 C1528 Pneumatic Tool-Non Reversible Drill with the speed of 350 RPM and above upto and including 750RPM. Pneumatic Tool- Reversible Drill with the speed above 100RPM upto and including 350RPM 38 Relevant Dowel 3Nos. 39 Relevant Cylinder & Bushing Assembly 40 Relevant Live Air Handle Stem & Bush 1No. 1No. 1No. 1 Relevant Cap 1No. 2 Relevant Valve 1No. 3 Relevant Live Air Handle Sleeve 1No. 4 Relevant Adaptor Flange 1No. 5 Relevant Governor Bushing 1No. 6 Relevant Governor Weight 2No. 7 Relevant Governor Body 1No. 8 Relevnt Governor pin 1No. 9 Relevnt Cylinder 1No. 10 Relevant Ball Bearing 2No. 11 Relevant Dead Handle 1No. 12 Relevant End Plate 1No. 13 Relevant Ball Bearing 1No. 14 Relevant Throttle Roller Protector 1No. 15 Relevant Cylinder Liner 1No. 16 Relevant Rotor 1No. 17 Relevant Spindle Collar 1No. 18 Relevant End plate 1No. 19 Relevant Spindle Gear 1No. 20 Relevant Gear Case 1No. 21 Relevant Collar 1No. 22 Relevant Gear Pinion 1No. 23 Relevant Ball Bearing 2No. 24 Relevant Spindle 1No. 25 Relevant Bearing 1No. 26 Relevant Transfer plate 1No. 27 Relevant Cylinder Cap 1No. 28 Relevant Governor Stop Pin 1No. 29 Relevant G Plunger 1No. 30 Relevant Dowel 3No. 31 Relevant Dowel 1No. 32 Relevant Stem & Bushing 1No. Assembly 1No. 1 Relevant Centre 1No. 2 Relevant Bushing 1No. 3 Relevant End Plate 1No. 4 Relevant Feed Post 1No. 5 Relevant Rotor 1No. C289

290 6 Relevant Liner 1No. 7 Relevant Rotor Housing Assembly C290 1No. 8 Relevant Plate 1No. 9 Relevant Ball Bearing 1No. 10 Relevant Spindle Gear 1No. 11 Relevant Gear case Assembly 1No. 12 Relevant Throttle Valve 1No. 13 Relevant End Plate 1No. 14 Relevant Gear Stud 1No. 15 Relevant ball Bearing 1No. 16 Relevant Valve Cage 1No. 17 Relevant Valve Pin 1No. 18 Relevant Bearing Clamp Nut 1No. 19 Relevant Governor Lever 1No. 20 Relevant Governor Body 1No. 21 Relevant Governor Push Pin 1No. 22 Relevant Ball Bearing 1No. 23 Relevant Nut 1No. 24 Relevnt Governor Weight 2No. 25 Relevant Muffler 1No. 26 Relevant Transfer Plate 1No. 27 Relevant Collar 1No. 28 Relevant Roller Race 1No. 29 Relevant Roller Bearing Assembly 1No. 30 Relevant Retainer Washer 2 Nos. 31 Relevant packing Nut 1 No. 32 Relevant extractor pin 1 No. 33 Relevant gear pinion 1 No. 34 Relevant internal gear 1 No. 35 Relevant ball bearing 2 No. 36 Relevant ball bearing 3 No. 37 Relevant dead handle 1No. 38 Relevant live air handle stem assembly 1 No. 39 Relevant Sleeve 1 No. 40 Relevant set screw 1 No. 41 Relevant throttle valve 1 No. 42 Relevant throttle cap 1 No. 43 Relvant seat 1 No. 44 Relevant universal joint 1 No. 45 Relevant Sleeve 1 No. 46 Relevant retainer sleeve 1No.

291 C1529 Pneumatic Tool- Reversible Drill with the speed upto 100RPM 47 Relevant protection sleeve 1 No. 48 Relevant throttle valve plate 1 No. 49 Relevant ball bearing 1 No. 50 Relevant cylinder cap 1No. 51 Relevant Feed sleeve handle 1No. 52 Relevant screw 1No. 53 Relevant Spindle 1 No. 54 Relevant Bearing spacer 1 No. 55 Relevant Dowel 2 Nos. 1No. 1 Relevant centre 1No. 2 Relevant Bushing 1 No. 3 Relevant end plate 1No. 4 Relevant Feed Post 1No. 5 Relevant Rotor 1No. 6 Relevant liner 1No. 7 Relevant Rotor housing assembly 1No. 8 Relevant Dead handle 1No. 9 Relevant Plate 1No. 10 Relevant Ball bearing 1No. 11 Relevant throttle valve 1No. 12 Relevant end plate 1No. 13 Relevant Gear stud 1No. 14 Relevant ball bearing 1No. 15 Relevant valve cage 1No. 16 Relevant valve pin 1No. 17 Relevant bearing clamp nut 1No. 18 Relevant Governor lever 1No. 19 Relevant Governor push pin 1No. 20 Relevant ball bearing 1No. 21 Relevant Nut 1No. 22 Relevant muffler 1No. 23 Relevant protection sleeve 1No. 24 Relevant throttle cap 1No. 25 Relevant roller bearing assembly 1No. 26 Relevant packing nut 1No. 27 Relevant ball bearing 1No. 28 Relevant ball bearing 1No. 29 Relevant transfer plate 1No. 30 Relevant Cylinder cap 1No. 31 Relevant Feed sleeve handle 1No. 32 Relevant throttle valve 1No. 33 Relevant screw 1No. C291

292 34 Relevant roller race 1No. 35 Relevant retainer washer 2Nos. 36 Relevant throttle valve plate 1No. 37 Relevant seat 1No. 38 Relevant collar 1No. 39 Relevant sleeve 1No. 40 Relevant Retainer sleeve 1No. 41 Relevant Sleeve 1No. 42 Relevant Universal Joint 1No. 43 Relevant Extractor pin 1No. 44 Relevant Governor Body 1No. 45 Relevant Spindle 1No. 46 Relevant Bearing spacer 1No. 47 Relevant Internal gear 1No. 48 Relevant gear pinion 1No. 49 Relevant internal gear 1No. 50 Relevant spindle gear 1No. 51 Relevant Governor weight 4Nos. 52 Relevant set screw 1No. 53 Relevant Dowel 2Nos. C1530 Movements for Electrical Measuring Instruments type: Moving iron, Moving Coil,Dynamo Meter,Bimetallic Reed Type,Namely Volt Meter,Ammeter,Frequen cy Meter,Watt Meter,Multimeters,Insula tion Testers,Maximum Demand Indicator,Power Factor Meter 54 Relevant Live air handle stem assembly 1No. 55 Relevant gear case assembly 1No. 56 Relevant ball bearing 1No. 1No. 1 Plastic Moulding Powder: 50Gms. a) ABS Net +5% wastage b) Polycarbonate Net +5%wastage c) Polyphenylene Oxide Net +5%wastage d) Polyacetal Net +5% wastage e) Polycarbonate Net +5% wastage f) Polyamide Net +5% wastage g) Phenol Formaldehyde (Bakelite) Power and Moulded components thereof Net + 5% wastage 2 Silicon Oils 1gm 3 Industrial Jewels with Screws 2Nos. 4 Pivots 2Nos 5 Hair Springs Net to net 6 Super Enamelled Copper Wire Net to net 7 Duralumin Rods Free Cutting Aluminium Rods, Capillary Tubes: Net + 2% Wastage a) Copper Bars/Strips Net +2% wastage b) Manganin Wire/Rods Net + 2% wastage C292

293 c) Eureka Wire/Rods Net +2% Wastage 8 Magnet Centre Core Net to net 9 Coil Former 1No. C1531 C1532 Pneumatic Tools-Hand Drill without Muffler with chuck 3/4" X 3 3/4" (19mm X 95.2mm) 10 Mumetals Permaloy Strips & Components thereof Net to net 11 Pointers/Pointer Arms Net to net 12 Tant Bands/Ligaments Net to net 13 Barllium Copper/Phospher/Bronze Strips Net +5% wstage (Qty. resctricted to 20gms) 14 Aluminium Die Castings Net to net 15 Bimetallic Springs 2Nos. 16 Springs Steel Strips Net to net 17 Transistors, Capacitors, IC's & Net to net other electronic components not covered by other inputs entries 18 Yoke 1No. 19 Hybride Circuits 1No. 20 Zener Diodes 2No. 21 Yoke Holder 1No. 22 Lower Boss/under Boss 1No. 1No. 1 Relevant Inlet bushing 1No. 2 Relevant Hose Tail 1No. 3 Relevant Throttle Lever 1No. 4 Relevnt Rear Valve Seat 1No. 5 Relevant Front Valve Seat 1No. 6 Relevant Valve 1No. 7 Relevnt Handle Bare 1No. 8 Relevnt Throttle Valve Bushing 1No. 9 Relevant Bolt 2No. 10 Relevant Pawl 2No. 11 Relevant Ratchet Ring 1No. 12 Relevant Cylinder 1No. 13 Relevant Piston 1No. 14 Relevant Cylinder Bushing 1No. 15 Relevant Retainer Plate 1No. 16 Relevant Chuck 1No. 17 Relevant Chuck Sleeve 1No. 18 Relevant Front Head 1No. 19 Relevant Plunger Shifter 1No. 20 Relevant Shifter Sleeve 1No. 21 Relevant Retainer Sleeve 1No. Pnumatic Tools-Hand 1No. 1 Relevant Inlet Bushing 1No. Drill with Muffler and 2 Relevant Hose Tail 1No. C293

294 C1533 Shifter Sleeve with Chuck 3/4" X 3 3/4" (19mm X 95.2mm) Pneumatic Tool-Concrete Vibrator with 2 1/2 (inch) Head 3 Relevant Throtle Lever 1No. 4 Relevant Rear Valve Seat 1No. 5 Relevant Front Valve Seat 1No. 6 Relevant Valve 1No. 7 Relevant Handle Bare 1No. 8 Relevant Throttle Valve Bushing 1No. 9 Relevant Bolt 2No. 10 Relevant Pawl 2Nos. 11 Relevant Ratchet Ring 1No. 12 Relevant cylinder 1No. 13 Relevant Piston 1No. 14 Relevant Cylinder Bushing 1No. 15 Relevant Retainer Sleeve 1No. 16 Relevant Retainer plate 1No. 17 Relevant Chuck 1No. 18 Relevant Chuck Sleeve 1No. 19 Relevant Front Head 1No. 20 Relevant Muffler 1No. 21 Relevant Plug Muffler 1No. 22 Relevant Button-Rotation Release 2Nos. 23 Relevant Washer-Clamping 1No. 24 Relevant Plunger Shifter 1No. 25 Relevant Shifter Sleeve 1No. 26 Relevant Depth Gauge 1No. 27 Relevant Dead Handle 1No. 1No. 1 Relevant Live Air Handle Cap 1No. 2 Relevant Plug Handle 1No. 3 Relevant Live Air Handle Cover 1No. 4 Relevant Sleeve 1No. 5 Relevant Hose Nipple 2No. 6 Relevant "Band-It" Clamp 2Nos. 7 Relevant Intake Hose 1No. 8 Relevant Shell & Nose Cap 1No. 9 Relevant End Cap 1No. 10 Relevant Eccentric Shaft Nut 2Nos. Assembly 11 Relevant Upper end plate 1No. 12 Relevant Eccentric weight 1No. Relevant Eccentric shaft 1No. 14 Relevant Lower end Plate 1No. 15 Relevant Hose Clamp (band-it). 3Nos. 16 Relevant Swivel Nipple 1No. C294

295 C1534 C1535 Pneumatic Tool Pneumatic Rock Drill 17 Relevant Lock Wire 1No. 18 Relevant Hose Clamp (Band-It). 2No. 19 Relevant Hose Nipple 1No. 20 Relevnt Exhaust Swivel Collar 1No. 21 Relevant Live Air Hose 1No. 22 Relevant Strainer 1No. 23 Relevant Oiler Body 1No. 24 Relevant Live Air Handle Stem & Bushing C295 1No. 25 Relevant Exhaust Hose 1No. 1No. 1 Relevant Valve 1No. 2 Relevant Retainer 1No. 3 Relevant Piston 1No. 4 Relevant Spring 2Nos. 5 Relevant Cylinder 1No. 6 Relevant Clamp 1No. 7 Relevant Muffler 1No. 8 Relevant Muffler Plug 1No. 9 Relevant Housing 1No. 10 Relevant Pin 2Nos. 11 Relevant Air Tube 1No. 12 Relevant Bushing 2nos. 13 Relevant Shaft 1no. 14 Relevant Button 1No. 15 Relevant Bush 1No. 16 Relevant Bearing 2Nos. 17 Relevant Sleeve 1No. 18 Relevant Casting 1 No. 19 Relevant Chain Link Lead 1No. 20 Relevant Throttle Valve 1No. 21 Relevant Handle 1No. 1No. 1 Relevant Handle Bracket (made of Steel Gr. SAE 8620) 2 Relevant Handle Bolt (made of Steel Gr. EN 9) 3 Relevant Air Inlet Swivel (made of Steel Gr. EN 24) 4 Relevant Air Inlet Swivel Nut (made of Steel Gr. SAE 8620) 5 Relevant blower Valve (made of steel Gr. SAE 8620) 6 Relevant Thru Bolt (made of steel Gr. EN 24) 7 Relevant Front Head (made of Steel Gr. SAE 8620) 8 Relevant Retainer (made of Steel Gr. SAE 8620) 1No. 1No. 1No. 1No. 1No. 2Nos. 1No. 1No.

296 C1536 Pneumatic Tool- Riverting Cutter (Buster) 8" to 11" Cylinder 9 Relevant Ratainer Trunnion (made of Steel Gr. SAE 8620) 10 Relevant Cylinder (made of Steel Gr. SAE 8620) 11 Relevnt Back Head (made of Steel Gr. SAE 8620) 12 Relevant Throttle Valve Handle (made of Steel Gr. SAE 8620) 13 Relevant Ratchet Ring (made of Steel Gr. SAE 8620) 14 Relevant Valve Case (made of Steel Gr. EN 354) 15 Relevant Blower Valve Bushing (made of Steel Gr. SAE 8620) 16 Relevant Rifle Bar Nut Bronze (made of Steel Gr. SAE 8620) 17 Relevant Piston (made of Steel Gr. EN 355) 18 Relevant Bushing Cylinder (made of Steel Gr. SAE 8620) 19 Relevant Air Tube (made of Steel Gr. SAE 8620) 20 RelevantChuck Rotation Nut (made of Steel Brass) 21 Relevant Chuck Sleeve (made of Steel Gr. SAE 8620) 22 Relevant Chuck (made of Steel Gr. SAE 8620) 23 Relevant Rifle Bar (made of Steel Gr. SAE 8620) 24 Relevant Valve(made of Steel Gr. SAE 8620) 25 Relevant Valve Guide Bushing (made of Steel Gr. SAE 8620) 26 RElevant Bushing Water Valve (made of Steel Brass ) 27 Relevnt Throttle Valve (Made of steel Gr. SAE 8620) 1No. 1 Relevant Throttle Valve (made of Steel Gr. SAE 8620) 2 Relevant Throttle Tube (made of Steel Gr. ENIA) 3 Relevant Throttle Lever (made of Steel Gr. EN 8) 4 Relevant Valve Case Lid (made of Steel Gr. SAE 8620) 5 Relevant Valve (made of Steel Gr. EN24) 6 Relevant Valve Case (made of Steel Gr. SAE 8620) 7 Relevant Handle (made of Steel EN8) 8 Relevant Spring Clip (Lock Collar) (Made of Steel Gr. EN8) C296 2Nos. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1No. 1no. 1No. 9 Relevant Lock Collar (made of Steel Gr. EN8) 1No. 10 Relevant Cylinder (made of Steel 1No.

297 C1537 C1538 Regulators with rotating outlet for LPG Cylinder Non Alloy Steel Forged (Mechined) Hammers upto 10Kg Pc. Wt. Without Handle or with Handle made of Steel/Wood/Rubber Gripped Steel Pipe. 1 No. (227gms) Gr. EN24) 11 Relevant Piston (made of Steel Gr. T118 CR2) 12 Relevant Lower Sleeve (made of Steel Gr. EN31) 13 Relevant Upper Sleeve (made of Steel Gr. EN 31) 14 Relevant Retainer Sleeve (made of Steel Gr. EN 24) 1No. 1No. 1No. 1No. 15 Relevnt Exhaust Deflector (made 1No. of Steel Gr. SAE 1070) 1 Zinc 245gms) 1Kg 1 Carbon Steel/Non Alloy Steel/bar/Rods/Billets 2 Chemicals Rust Preventing Oil/Primer/Paints 3 Consumables:- Refractory material, Die Steel, die Block,Cutting Tool,Cutters Sawing blades, including Bimetallics bandsaw blades steel shots, fuel oil, heat treatment chemicals quenching oil & lubricants. 4 a) PIPE + RUBBER +NICKLE 1.700Kg/Kg content in Limited to 2% of FOB value of export Limited to 4% of FOB value of the export. (i)pipe(for handle) ERW Cold 0.280Kg Drawn Steel Tubes pipe of Relevant Std. ii) Nickle (for Electroplating for 0.012Kg (i) iii) Rubber (for Grip) Natural 0.130Kg Rubber b) Wood (for Handle) 0.250Kg Import item at 4(a) (I) (ii) & (iii) and (b) will be allowed with reference to the nature of the product to be exported. C1539 Bearing/Gear Puller 1MT. 1 Non Alloy Steel Plate 1.32MT made of Non Alloy Steel 2 Non Alloy Steel Round 0.367MT Plate/Round with chrome 3 Nickle 15.5Kg plated legs. C1540 Handle Bar Switch LH/RH : a) with/without grip (b) with/without lever (c)with/without cone 1Kg 1 Terminal Net to net 2 Coupler Net to net 3 Nylone Grannules 1.05Kg/Kg content in 4 Phenol Formaldehyde 1.05Kg/Kg content in 5 Polyester Grannules 1.05Kg/Kg content in 6 ABS Grannules 1.05Kg/Kg content in 7 PVC Grannules 1.05Kg/Kg content in 8 Copper Wire Bars/Copper Sheet. 1.02Kg/Kg content in C297

298 C1541 C1542 C1543 C1544 C1545 C1546 Grip for Handle Bar with/without Cone Shifted to Electronic Group Shifted to Miscellaneous Group Aluminium Drying Hanger Micanite Insulator Sheets containing 170gms, Resin. Carbon Steel/Alloy Steel(including Stainless Steel). Forged Flanges. Note:- Furnace Oil shall be allowed only for Hot Forgings C1547 Outdoor/Indoor Vaccum Circuit Breaker with or without Motor operated mechanism and supporting structure (of different ratings and weight of supporting structure) 9 Brass Sheet/Strips 1.05Kg/Kg content in 10 Spring Steel/Coil/Strip 1.05Kg/Kg content in 11 Mild Steel Square/Rods 1.05Kg/Kg content in 12 Aluminium Alloy Ingots. 1.05Kg/Kg content in 1Kg 1 PVC Grannules 1.05Kg/Kg content in 1Kg 1 Relevant Aluminium Alloy Ingots C Kg/Kg content in 2 Nylone Cord Kg/Kg content in 3 CRCA Sheet 1.075Kg/Kg content in 1Kg 1 Resin (Epoxy/Polyester). 187gms. 2 Teflon (PTFE) coated glass cloth sheets/roll 1MT 1 Relevant Forging Quality Carbon Steel/ Alloy Steel/ Stainless Steel Rounds/ Billets/ Bars/ Rods 2 Rust Preventing Oil/Primer/Paint, Die Steel/Die Blocks, Cutting Tools, Sawing blades, Metallic Bandsaw blades, Steel Shots, Refractory material, Heat Treatment Chemicls, Quenching Oil and Lubricants 3 Deleted 1No. 1 Vaccum interrupter of relevant rating RAW MATERIAL upto 5% of FOB value of export product 1.65MT Upto 5% of the FOB value Net to net 1) Copper Bar 1.01 kg/kg content in the Vaccum Interrupter 2) OFHC Bar 1.01 kg/kg content in the Vaccum Interrupter 3) SS Strips/ Plate 1.05 kg/kg content in the Vaccum Interrupter 4) Bismuth Powder/ Chrome Powder 1.03 kg/kg Spherical OFHC Cu powder 2 Aluminium Ingot 1.01 kg/kg content in. 3 CR/HR Non-Alloy Steel Sheet/Coil 1.03Kg/Kg content in 4 Copper Wire Bar 1.01Kg/Kg content in

299 C Berrylium Copper Strip 1.01Kg/Kg content in C299 COMPONENTS 1 Forged ZLR Ring 1 2 Bellow Closure Plate 1 3 Convolution 1 4 Pressed End Plate 1 5 End Plate 1 6 Bellow Assembly 1 7 Stud Plate 1 8 Bearing Retainer Plate Net to net 9 Bearing Net to net 10 Gauze Tilter Net to net 11 Pump Port Black 1 12 Restrain Band 1 13 Pump Port 1 14 End Plate Assy Pump Port Braze Ring 1 16 MC Stub 1 17 FC Stub 1 18 Glass Ceramic Envelope 2 19 End Shield 2 20 Center Shield 2 21 Getter 1 22 ZLR Contact Tips 2 23 MC Base 1 24 FC Base 1 25 Incusil Pallet 1 26 End Plate 2 27 Braze Washer 4 28 CLR Cup 2 29 Pumped Assembly 1 30 Bearing Liner 1 31 Mounting Stud 3 32 Lable 1 33 Restraining Band 6 34 Plain Washer 3 35 Spring Washer 3 36 HEX Nut 3 Outdoor/Indoor Vaccum 1No. 1 Vacuum interrupter of relevant Net to net Circuit Breaker with rating Motor operated 2 Aluminium Ingot 1.01Kg/Kg content in mechanism and supporting structure (of 3 CR/HR Non Alloy Steel 1.03Kg/Kg content in

300 C1549 C1550 C1551 C1552 C1553 C1554 C1555 C1556 C1557 C1558 different ratings and weight of supporting structure) Pressure Cooker made of Aluminium Body & Stainless Steel (AISI 304 Grade) Lid Carbon Steel (MS) Fabricated Tower Packings Shifted to Electronic Group Deleted Battery type NCSPB (Nickel) Cadmium Batteries) 24Vols. 25AH Shock Absorbers for Two wheelers/three wheelers Strut with Spring Assembly for Van Shock Absorbers (Gas filled) for Multi Utility vehicle (MUV) Shock Absorbers for Cars/Jeep-conventional Circuit Breakers upto & including 200KVA. C300 Sheet/Coil 4 Copper Wire Bar 1.01Kg/Kg content in 5 Berrylium copper Strip 1.01Kg/Kg content in 1Kg 1 Aluminium Circles, Commercial Grade 2 Non Magnetic Stainless Steel sheets/coils AISI 304 Grade 1/1.25mm Thick 1MT 1 CRCA Carbon Steel (MS) Sheets/Strips. 1.07Kg/Kg content in 1.25Kg/Kg content in MT per MT of. 1No. 1 Nickel fibremat fibrex 27.05Sq.ft. 1 Nickel Powder 3.12Kgs. 2 Nylone Moulding granules 3.70Kgs. 3 Non woven Separators Sq./Mtrs. 4 Nickel Powder Type 2.64Kgs. 255/287/210 5 Celegard (R) 3400 Flat Sheet/ 6.20Sq. Mtrs. Film 6 Battery Connectors 1No. 7 Metregrip 303 LV epoxy adhesive acticator 0.52 Ltrs 8 Metrigrip 303LV epoxy 0.52Ltrs. Adhesive base 1No. 1 Bump Stop (Hexagon RSI) 1No. 1No 1 Reverse DU Bush 1No 2 Rod Seal 20MM 1No. 3 Bushing 20MM 1No. 1No. 1 Piston Rod Seal 1No. 1No. 1 M.L. Seal 1No. 1No. 1 Copper Wire Rods/Cathodes 1.01Kg/Kg content in 2 Copper Strips 1Kg/Kg content in. 3 Plain Copper stranded Flex Round (Braided Copper) 1Kg/Kg content in 4 Aluminium Sheets/Ingots 1.01Kg/Kg content in 5 CRCA Sheets. 1.01Kg/Kg content in. 6 Thermostat Metals Net to net 7 Electrical Contact Net to net

301 C1559 C1560 C1561 C1562 C1563 C1564 C1565 C1566 C1567 C1568 C1569 C1570 C1571 C1572 C1573 C1574 C1575 C1576 Shifted to Electronics Group Shifted to Electronics Group Shifted to Electronics Group Shifted to Electronics Group Shifted to Electronics Group Shifted to Electronics Group Shifted to Electronics Group Shifted to Electronics Group Shifted to Electronics Group Shifted to Electronics Group Shifted to Electronics Group Shifted to Electronics Group Shifted to Electronics Group Shifted to Electronics Group Shifted to Electronics Group Bicycle Tube Valve mainly made of Brass Bronze ingots of different allowing percentage (containing Tin, Copper and Nickle). Buttons/Square Buttons/Round Buttons. 8 Fastners/Tab Nuts Net to net. 9 Extension Springs. Net to net 10 Secondary Latch Spring Net to net 11 Contact Arm Springs Net to net 1Kg 1 Brass Scrap 1.20Kg/Kg content of Brass in the export product. 1Kg. 1 Tin Ingots 1.02Kg/Kg content in. 2 Copper Scrap. 1.06Kg/Kg content in. 3 Nickle 1.02Kg/Kg content in. 4 Phosphor Copper Kg. Tungsten Filament for 1Kg 1 Tungsten Wire 1.2Kg GLS Lamps- 150 WCC. 2 Molybdeneum Wire 0.85Kg C1577 Doctor Blades (for 1Kg 1 Hardened & Tempered Carbon 1.15Kg C301

302 C1578 C1579 C1580 C1581 C1582 C1583 printing machines) Fire Clay Bricks/Shapes Iron-Nickel Alloy(s) Wire /Strip of different composition Steel Strips (In Coils)/ Stainless Steel (Martensitic Grade) Strips (in Coils) 1MT 1 Calcined Clay 0.752MT 2 Non-Plastic Clay 0.220MT 3 Ball Clay 0.055MT 4 SRM-30 (Calcined Alumina) 0.035MT 1 Kg 1 Nickel Pellets and /or Cathodes 1.03Kg/Kg content in. Nickel Chromium Alloy(s) Wire /Strip of different composition 2 Chromium Metal Flake and/or Lumps. 1Kg 1 Nickel Pellets and /or Cathodes. 1.03Kg/Kg of Nickel in. Nickel-Copper Alloy(s) wire /Strip of different composition 2 Copper Ingot and /or Copper Cathodes High Speed Steel broaches (cutting tolls), Cobalt & Non-Cobalt Grade Spring Casing for Pipe Line support C Kg/Kg content in. 1Kg 1 Nickel Pellets and/or Cathodes 1.03Kg/Kg of Nickel in. 1Kg 1 Relevant High Speed Steel (Cobalt/Non-Cobalt grade) 1.03Kg/Kg of Copper in. 1.45Kg/Kg content in. 1Kg 1 M S Plate/Sheet 1.15Kg/Kg content in Note: If is galvanized zinc may be allowed as 4% of the weight of parts to be galvanised. C1584 C1585 C1586 Staples/Staples in Strips CNC/NC Hydraulic Shearing Machine 1Kg 1 Galvanized Steel Wire 1mm to 2.1mm dia 2 Synthetic Glue Kg 1No. 1 Geared Motor Net to net 2 Servo Motor Net to net 3 Hydraulic Pump Net to net 4 Controller for Shear Net to net 5 Hydraulic Accumulator Net to net 6 Encoder Net to net 7 Linear Motion bearing Net to net 8 Servo Amplifier Net to net 9 Ball Screw Net to net 10 Nuts for Ball Screws Net to net 11 Spherical Bearing Net to net 12 Thread Spindle Net to net 13 Timing Belt Net to net 14 Bush PAP 50/40 Net to net 15 Timing Pulley Net to net 16 Hydraulic Seals Net to net 1.02 kgs/kg content in Iron Alloy Powder made 1Kg 1 High Grade Raw Ground Sponge 1.12Kg/Kg content in from Sponge Iron of Iron different composition. 2 Copper Powder 1Kg/Kg content in

303 C1587 C1588 C1589 C1590 C1591 CNC Hydraulic Press Brake Deleted Duel Gauge Prestresed Concrete sleeper (size 2750mm X 250mm Based Width X 255mm Height) Shifted to Electronic Group Aerosol Valve 3 Carbon Ultra Fine 1Kg/Kg content in 4 Zinc Sterate 1Kg/Kg content in 5 Nickel Powder 1Kg/Kg content in 1No. 1 Geared Motor Net to net 1No. (378Kg) 2 Servo Motor Net to net 3 Hydraulic Pump Net to net 4 Director Control Valve Net to net 5 Prop. Director Control Valve Net to net 6 Prop. Pressure Control Valve Net to net 7 Pressure Relief Valve Net to net 8 Cartridge Valve Net to net 9 Spherical Bearing Net to net 10 Linear Motion Bearing Net to net 11 Linear Motion Guides Net to net 12 Hydraulic Seals Net to net 13 Guide Shaft Bearing Net to net 14 HP Line Filter Net to net 15 Timing Belt Net to net 16 Timing Pulley Net to net 17 Linear Scales Net to net 18 Servo Amplifier Net to net 19 CNC Press Brake Controller Net to net 20 Axis Control Card Net to net 21 Safety PLC Net to net 22 Expanded Module Net to net 23 Two Hand Control Box Net to net 24 Nuts of Ball Screws Net to net 25 Ball Screws Net to net 26 Guide Shaft Net to net 27 Special Elec. Connector Net to net 28 Encoder Net to net 1 High Tensile Carbon Steel Wire 12.2Kg 2 Relevant Portland Cement 68.5Kg 3 Inserts 6 Nos. 1 1No. 1 Actuator/Spray Cap 1No. 2 Body 1 No. C303

304 C1592 C1593 C1594 Disc Wheel Flat Base Rim Vaccum Drum Cane Mud Filters Automobile Locks other than Ignition locks 3 Stem 1 No. 4 Inner Gasket 1 No. 5 Outer Gasket 1No. 6 Mounting Cup 1No. 7 Polyethylene Grannules 1.05Kg/Kg content in. 1No. 1 Flanges 1No. 2 Lock Ring 1No. 3 Valve Guard 2No. 4 Rubber Sealing Ring 1No. 5 Locking Clip 1 No. 6 Safety Pin 1No. 7 Lock Pin 1No. 1No. 1 S.S. 304 Plate/Coil (Thickness from 5mm to 16mm) C MT/MT content in 2 Relevant Variable Speed Motor 1No. (net to net) 3 Relevant fixed Gear Motor 1 No. (net to net) 4 Relevant ERW Pipes 0.10MT 5 SS 304 Electrodes 20Kg per MT of Steel weight in export product 1No. 1 Zinc Ingot 1.10Kg/Kg content in 2 Brass sheet 1.15Kg/Kg content in 3 CRCA Sheets/coils 1.20Kg/Kg content in 4 Stainless Steel Sheet/Coil 304 Grade 1.20Kg/Kg content in 5 Spring Steel Sheet 1.20Kg/Kg content in 6 Polyacetal 1.05Kg/Kg content in 7 Lock Pin 2 Nos. 8 Guide Lock Plate 2 Nos. 9 Lock Plates 18 Nos. (Net to net) 10 Key 2 Nos. 11 Cap 2 Nos. 12 Key Tag 1 Nos. 13 Gasket 2 Nos. Note: The Components shal be allowed on net to net basis which the firm shall account for in the export product. C1595 Folding Machine for Sheetmetal (Manual) 1No. (1254Kgs X 2mm) 1 Non Alloy Steel plates/flats 845Kg 2 Non Alloy Steel 93Kg Square/Rectangle ERW Tube 3 Non Alloy Steel Angles 107Kg

305 C1596 Rolled Aluminium Colour coated Plates, Sheets, Strips including Corrugated Aluminium Sheets/Strips 4 Non Alloy Steel Bright Bar 2.74Kg 1MT 1 Aluminium Ingots Commercial grade C MT/Mt content in 2 Relevant Paints. 1% of FOB Value C1597 High Speed Stel Wires 1Kg 1 High Speed Steel Bar/Wire 1.03Kg Rods/Rods of relevant grade C1598 Machined Components 1Kg 1 Brass Scrap 1.075Kg made of brass not elsewhere specified C1599 Industrial Valve fitted 1 No. 1 Relevant Actuator 1No. with Actuator 2 Relevant Valve 1No. C1600 Sanitary Fittings made of 1Kg 1 Nickle Bronze Ingot 1.05Kg Nickle Bronze Note:- Composition of imported input should conform with that of. C1601 C1602 C1603 C1604 C1605 C1606 Complete Rear Lamp Assembly for Automobiles 1No. 1 CRCA Sheet/Strip 1.05 kg/kg content in 2 Polymethile Metaacrylate 1.05 kg/kg content in 3 Polymethile Metaacrylate (PMMA) Natural 1.05 kg/kg content in 4 Polycarbonate 1.05 kg/kg content in 5 Poly propylene Talc 1.05 kg/kg content in 6 ABS 1.05 kg/kg content in 7 Spring Net to net 8 Cut Gasket Net to net 9 Foam Seal Gasket Net to net 10 Gasket Net to net 11 Fixing Screw Net to net Lense for Rear Lamp Assembly for Automobiles 2 Polymethile Metacrylate (PMMA) Natural Shifted to Electronic Group Shifted to Electronic Group Double Parabolic Louvres (Aluminium Louvres for Light Reflection) PFA or FEP or PTFE or PVDF resin lined Ball Valves with PTFE components like seals, seats, packing etc. in assorted size/ Weight 1No. 1 Polymethile Metaacrylate 1.05 kg/kg content in 1.05 kg/kg content in 1Kg 1 Pre-Anodised Aluminium Coils 1.01 kg/kg content in 1Kg 1 PFA or FEP or PTFE or PVDF Resin 1.05 kg/kg content in

306 C1607 C1608 C1609 C1610 C1611 C1612 C1613 Epoxy components of different voltge rating and specification. Diesel Generating Set (specification to be indicated by the applicant) 1200mm Slat Chain Conveyor Diapharagm Actutators Aluminium Rod/Bar and other extruded products. Hydraulic Jack Weight 22Kgs. Model No. HJ01021 Tungsten Carbide Inserts 1Kg 1 Epoxy resin Epotec/CY225/ CW229 or equivalent grade 2 Hardner HY 925/ Hexa Hydro Phthalic Anhydride (HHPA)/ equivalent grade/hw229 3 Electrolytic Copper Wire Bar/ Flats/ Rods/ Bus bars 4 Mould Relese Agent QZ- 13/QZ24 5 Semi-conducting Varnish- 800/8001 1No. 1 Relevant Diesel Engine 1 No. 2 Relevant Alternator 1 No. C kg/kg content in 1.05 kg/kg content in 1.01Kg/Kg content in. CIF value restricted to 1% of FOB value. CIF value restricted to 1% of FOB value. 3 Relevant Key Start Control 1 No. Module 1No mm pitch elevator chain On net to net basis 2 Segmented Sprocket (head) 152.4mm Pitch 630 PCD On net to net basis Segmented Sprocket (Tail) On net to net basis 125mm pitch 755PCD 1No. 1 Diaphragm-Nitrile Rubber Net to net 2 Springs-Alloy Spring Steel Net to net 3 Fastners-SS 304/SS 316 Net to net 4 Bushes-Glacier MB 4530 DU Net to net 5 Seals-Barker Rod Seal Net to net 6 Adaptor-Swagelok SS 12-RB-4 Net to net 7 Vent Protecor Swagelok SS- MD2 Net to net 1Kg 1 Aluminium Billet 1.01Kg 1No. 1 Aluminium Ingots 8.9Kg 2 Aluminium Bronze 0.61KG 3 Aluminium Rod 0.40Kg 4 Square/Round/Rod(Carbon 9.8KG Steel) 5 Relevant Socket Lever 1No. 6 CR/HR/Steel Sheet/Coil/Strip 0.55Kg. 7 Cold Drawn Seamless Tubes EN 1.44 Kg 24 8 MS Squares Hexagon Rods 0.25 Kg 9 Relevant Oil Seals made of 13 No. Synthetic Rubber 10 High Tensile Bolts/Nuts 10 Nos. 11 Relevant Spring 4 Nos. 12 Relevant Tube fittings Assembly 4 Nos. 1Kg 1 Tungsten Carbide Mixed Powder 1 a) Tungsten Carbide Powder 99.5% min. purity 1.05 Kg/Kg content in 1.05 Kg/Kg content in. b) Tantalum Carbide 1.05 Kg/Kg content

307 C1614 C1615 Typewriter (Manual) with Metal Casing Screw/Gear Pump/Pumpset c) Tantalum Niobium Carbide 70/30% C307 in 1.05 Kg/Kg content in d) Cobalt Metal 98.8% Min Kg/Kg content in. e) Tungsten Titanium Carbide 50/50% 1.05 Kg/Kg content in. 2 Packing Material As per packing policy. 3 Tantalum Niobium carbide 70/30% 1.05 kg/kg content in 4 Cobalt Metal 98.8%min 1.05 kg/kg content in 5 Tungsten Titanium Carbide 50/50% 1.05 kg/kg content in 6 Packing Material As per packing policy. 7 Consumables CIF value restricted to 4% of the FOB value 8 Grinding Wheel for edge honing and Ultra Graphite Coat 1000Nos. 1 Cold Rolled Mild Steel Strips/coils/Sheets. restricted to 3% of FOB value 7250 Kgs. 2 Manganese Chrome Steel Strips 702 Kgs. 3 Spring Steel Strips 150 Kgs. 4 Mild Steel Bars/Wire 920 Kgs. 5 Stainless Steel Sheet 160 Kgs. 6 Aluminium Alloy ( LM-6) 4700 Kgs. 7 Zinc Ingot 500 Kgs. 8 ABS Granules 1.05 Kg/Kg content in. 9 Type Sets. Net +1% wastage 1No. 1 Relevant Screws Relevant 1 Set. Gears. 2 Relevant Electric Motor 1 No. Relevant Diesel Engine 3 Relevant Mechanical Seal 1 No. 4 Relevant Pressure Relief Valve 1 No. 5 Relevant Ball Bearing with SKF 1 No. No. 6 Relevant Coupling 1 No. 7 Relevant Pump Casing Insert 1 No. Item No. 2 i.e. Electric Motor/Diesel Engine shall be allowed only when complete set is exported. All inputs imported shall be accounted for in C1616 Asbestosfree Brakelinings 1Kg 1 Phenol Formaldehyde Resin 0.185Kg without Brass Chips & (Powder Phenol Resin) Nitrile Rubber 2 Fibreglass Chopped Strands 0.076Kg C1617 Rechargeable Flash Light 3.6 Volt AA Size NiCd 1No. 1 Ni-cd Rechargeable Battery 1.2 Volts AA Size Battery 2 ABS Granules 1.05Kg/Kg content in. 3Nos.

308 C1618 C1619 C1620 C1621 Rechargeable Flash Light 2.4 Volt AA Size NiCd Battery Rechargeable Flash Light 2.4 Volt Button Type Ni- Cd Battery Rechargeable Flash Light 2.4 Volt Button Type Ni- Cd Battery with twin Bulb Fibre Bed Mist Eliminator (Candle Filter) having Glass Fibre Filter Segments 3 Pre-focused Bulbs 1No. 4 Transformer 1No. 1No. 1 Ni-cd Rechargeable Battery 1.2 Volts AA Size. C308 2 Nos. 2 ABS Granules 1.05Kg/Kg content in. 3 Pre-focused Bulbs. 1No. 4 Transformer 1No. 1No. 1 Ni-cd rechargeable battery 2.4 1No. Volts 2 ABS Granules 1.05Kg/Kg content in 3 Pre-focused Bulbs. 1No. 4 Capacitor 0.33 Mfd. 1No. 5 Capacitor 10Mfd. 2 Nos. 1No. 1 Ni-cd Rechargeable battery 2.4 1No. Volt 2 ABS Granules 1.05Kg/Kg content in. 3 Pre-focused Bulbs. 2Nos. 4 Capacitor 0.33Mfd. 1 No. 5 Switch Single pole 3 way 1No. 1No. 1 Filter Segments in Glass Fibre (Glass Wool) of relevant size C1622 Contacts (connector 1Kg 1 Phosphor Bronze Strips CuSn5 1.62Kg parts) Made of Phosphor Bronze C1623 Ball Screw Actuator 1No. 1 Ball Screw with Nut. 1No. C1624 C1625 Cementing Float/Duplex/Differential shoes of different sizes Stage Cementing Collars 1) For 5.1/2" stage cementing collar 25.5/8" long 2) For 7" stage cementing collar 25.1/2"long with outer sleeve 10.1/4" long 3) For 9.5/8" Stage cementing collar 25.5/8" long with outer sleeve 10.1/4" long 4) For 13.3/8" Stage cementing collar 34" long with outer sleeve " long 1No. 1 Seamless casing pipes of relevant API Grade of Similar Dia. 1No. For Export item No. 1 ) 1. Seamless casing pipe in required API Grade 6.062"OD X 4.710" ID In height of 1Ft. (305mm) in Multiple of 2 Ft. (610mm) Segments depending upon the Ht. of the export product. 1 No. of actual length of +1/2" extra. 26.1/8" long For Export item No. 2) (1) Seamless casing pipe in 26"long required API grade 7.656" OD X 7.135" ID (2) Seamless casing pipe in 10.3/4" long required API grade 8.250"OD X 7.135" ID For export item No. 3) (1) Seamless casing pipe in 26.1/8"long required API grade "OD X 8.998"ID (2) Seamless casing pipe in 10.3/4" long required API grade "OD X 9.720" ID For export item No. 4)

309 C1626 C1627 C1628 C1629 C1630 Galvanised High Carbon Steel Wire Ropes with Polypropelene Core Copper based alloy ingots of different grade. Cementing Float/Duplex Differential Collar of different sizes Single Stage regular with rotating outlet for LPG Galvanised Steel Flexible Tube/Pipe (Conduit) with PVC coating C1631 Steel Moulds of size 5150 mm long X 1181mm Wide X 2.25 mm TK for manufacturing A.C. Corrugated Sheets. C1632 Electrical Wiring Accessories/ components made of Phosphors (1) Seamless casing pipe in 34.1/2" long required API grade " OD X "ID (2) Seamless casing pipe in " long required API grade " OD X "ID 1MT 1 High Carbon Steel Wire Rods 1.02MT/MT content in. 2 Zinc 4% of the net weight of steel wire rods 3 Polypropelene Granules 1.05Mt/Mt content in. 1Kg 1 Copper Scrap C309 Copper Cathodes 1.06 Kg/Kg content in 1.02 kg/kg content in. 2 Tin Ingots 1.02 Kg/Kg content in. 3 Nickel Shots/Pellets/Ingots/Cathodes 4 Lead Scrap Lead Ingots 5 Zinc Scrap Zinc Ingot. 6 Aluminium Scrap Aluminium ingot 1.02 Kg/Kg content in Kg/Kg content in. 1.02Kg/Kg content in Kg/Kg content in. 1.02Kg/Kg content in Kg/Kg content in. 1.02Kg/Kg content in. 7 Manganese (Elemental Form) 1.02 Kg/Kg content in. 8 Phosphor Copper 0.01 Kg. 1No. 1 Seamless casing pipes or relevant API Grade of similar dia 1 No. (260gms) 1 Zinc Alloy A 14/AL 4 Cu 1 230gms. 1 Kg 1 Low Carbon M.S. Defective Coils/sheets 1 No. of actual length of +1/2" extra 1 kg/kg content in the. 2 Zinc Kg content in. 3 PVC Compound (Granules) 1.05 kg/ kg content in. 1 Kg 1 HR Non Alloy Steel Sheet/Coil 1.05 Kg/Kg content in. 1 Kg 1 Phosphors Bronzes Sheets/Strips/Coils 1.05 Kg/Kg content in.

310 C1633 C1634 C1635 C1636 C1637 Bronze Electrographatised Carbon Block 1 Kg 1 Pre-graphatised Carbon Block 1.02 Kg. Metallic Graphite Blocks 1 Kg 1 Copper Powder 0.64 Kg containing 62% Copper 2 Natural Graphite Lumps 0.40 Kg PVC Insulated Unarmoured control purpose copper cable upto 1.1KV Size 36/0.23mm (1.5Sq.mm) X 3 Core Burning Lances (Nonalloy Steel pipes fitted 1000 Mtrs. 1 Copper Cathode/CC Rod/Wire Bars Ingots/ Copper Wire Rod C Kg 2 PVC Resin Kg 3 Pthalate Plasticize (DOP) Kg 4 Fillers (Calcium Carbonate/Alumina/Talc/Kaoline ) 1 Kg 1 CR Non-Alloy Steel Coils (Prime/Seconds) with alloy steel wires) 2 Alloy Steel Wire of Relevant Grade. Spinning Card Cans Kg 1.05 Kg/Kg content in Kg/Kg content in. 1 No. 1 HDPE granules 1.05 Kg/Kg content in. 2 G.P. Coils/Sheet 1.05 Kg/Kg content in. 3 Spring Steel Wire 1.02 Kg/Kg content in. 4 CRCA Coil/Sheet Kg/Kg content in. 5 Caster Wheels. Relevant Bearing 3 Nos. (net to net) 3 Nos. (net to net basis) Note:- If the party exports only Caster Wheels, then relevant bearing may be allowed on net to net basis as per item No. 5 above i.e. 1 No. per Caster Wheel. C1638 C1639 C1640 Diffuser and parts thereof namely Flower, Core, Core Assembly and outer frame in various sizes manufactured without joints from Aluminium Sheets, (other than those manufactured from Aluminium Section/extrusions) Copper Conductor covered with Polyester film & Glass fibre Yarn Fibreglass/ Synthetic Filter Bags of different sizes with Snap Ring made of Stainless Steel AISI 301 and other fittings. 1 Kg 1 Aluminium Ingot Rolled Aluminium Sheet in coil Form 1.15 kg 1.05 kg 2 Aluminium Scrap 1.20 kg 1 Kg 1 Copper Wire Rod/Cathode 1.01Kg/Kg content in. 2 Glass Fibre Yarn 1.01Kg/Kg content in. 3 Polyester film 1.01Kg/Kg content in. 4 Nomex Aramid Paper 1.01 kg/kg content in 1 No. 1 Fibreglass/ Synthetic Filter Cloth of relevant GSM 2 Fiberglass/ Synthetic Sewing Thread 1.02 Sq.Yard/Sq. Yard of cloth in kg/kg Content in 3 Stainless Steel Strip AISI kg/kg Content in

311 C1641 C1642 C1643 C1644 C1645 C1646 C1647 Shifted to Electronic Group Connector Harness DC 1 No. 1 DC Plugs 2Nos. Charger Cable Assembly 2 PVC Insulated Cables 1.9 Mtrs. Platform for Electronic Balances & Weighing Systems Galvanised Lamp stand made of CRCA Sheet 1) Mini Dumper 2)Front end Loaded cum Dumper 3) Cement Concrete Mixer Shifted to Electronic Group Capital Goods & Machinery notelsewhere specified. 1 No. 1 Level Assembly 1No. 2 Load Cell of relevant Load 1No. 1 Kg 1 CRC Sheet/Coils 1.05Kg/Kg content in. 2 Zinc 4% of net weight of steel item to be galvanized. 1 No. 1 For export item No. 1) 1No. (i) Gear Box ii) Front Axle 1 No. (iii)view for Oil Level (iv)plug (v)distributor Valve and handle 2 For export item No. 2) (i) Gear Box ii) Front Axle (iii)view for Oil Level (iv)plug 1 No. 1 No. Net to net. 1 No. 1No. 1 No. 1 No. (v)distributor Valve and Handle Net to net. 3 for export item No. 3) (i) Gear Box (ii) Front Axle (iii) View for Oil Level (iv) Plug 1No. 1No. 1No. 1No. (v)distributor Valve and Handle Net to net. (vi)hyd. Motor (vii)control Valve 1 No. Any and / or all the following components which are actually required for manufacturer of the machinery. COMPONENT :- 1 No. 1 No. 1 Belt with specification Net to net. 2 Motors with detailed Net to net specification 3 Timing Belt 102mm/100mm content in the export product. 4 Switches, Control Panel and Fuses Net to net 5 Electrical wires and cables with detailed specifications. 102mtrs/100mtrs in. 6 Temperature Thermostat Net to net C311

312 Switches 7 Fastners 102No./100No. content in the export product. 8 Roller Chain 102Mtrs/100Mtrs content in the export product. 9 Gasket of different type Net to net 10 Camshaft Net to net 11 Subassembly of Machine Net to net 12 Oilseals Net to net 13 Pulleys Net to net 14 Measuring Instrument and valves as component 15 Pipe fittings such as Elbow, Tee, Bars, Reducer, Coupling relevant material 16 Relevant Bearings including Bush, Ball, Roller or Spherical or combination there of (SKF or equivalent No. of the bearing is to be specified in the application) 17 Relevant Pipe Fitting including Tee, Bands/ Elbows/ Sockets/ Unions RAW MATERIAL:- Net to net Net to net Net to net. Net to net. 1 Pig iron for the cast components 1.1 kg/kg content in. 2 Non Alloy Steel Plates/Coil/Sheet 3 Alloy Sheet including SS Plates/Coil/Sheets 4 Alloy Sheet/Non-Alloy Steel SS Rounds/Bar 1.05Kg/Kg content in. 1.05Kg/Kg content in kg/kg content in. 5 Brass Scrap. 102Kg/100Kg content in the export product. 6 Aluminium Alloy Ingots/Rods/Bars 1.01 kg/kg content in 7 Copper Alloy/Rods/Bars 1.01 kg/kg content in. 8 Relevant Type of plastic materials ABS, HDPE, LDPE, PVC compound Nylon6, Nylon66 9 Non Alloy Steel Welded pipe of relevant dimension 10 Alloy Steel Welded Pipe including S.S. Pipes of relevant dimension 11 Relevant Carbon Steel pipes/ Tubes upto 24" diameter 12 Relevant Stainless Steel Pipes/ Tubes having dia 15mm to 400mm 105Kg/100Kg content of the relevant material in kg/kg content in 1.02 kg/kg content in 1.02 Mtr./ Mtr. Content in the export product Mtr./ Mtr. Content in the export product. C312

313 13 Structural materials, including Beams, Chennels, Angles, Chequered Plates, purlines C kg/kg content in. 14 S.S. Screen Wiremesh 1.05 Sq. Mtr./ Sq.Mtr.content in the. 15 Relevant Electrode/ Flux 2% of relevant steel to be welded for use in. a) Relevant welding Electrodes/ Welding Wires/Welding Rods 2% of the weight of steel to be Welded b) Relevant Flux Equal to the weight of welding wires MISC. ITEMS:- 1 Grease CIF value restricted to 2% of FOB value. 2 Paint 3 Varnish 4 Lubricating Oil 5 Grinding Wheels. 6 Abrassives 7 Rust Preventive Chemicals 8 Polishing Compounds. 9 Metal Polishing Chemical 10 Deleted 11 Deleted 12 Cutting Wheel 13 Paint & Thinner 14 Self Adhesive Tape 15 Relevant Chemicals 1. Specification/Capacity & weight of capital goods alongwith number is to be indicated in the application. 2. Net weight of component & sub assemblies to be imported to be procured indigenously to be given in the application & items to be manufactured from each raw material to be imported is to be given in the application. 3. Net weight of components and items to be manufactured from each raw material to be imported is to be given in the application. 4. Weight of component and item to be manufacturted from each indigenous material in is to be given in the applicatin 5. Weight of components and the item given as per Note 2 to 4 should tally with net weight of capital goods to be exported. 6. Total weight of each raw material is to be calculated on the basis of net weight given as per Note 3 above plus wastage as permitted in the norms for the particular raw material. C1648 3/4 Tube Fryer 1 No. 1 S.S.Steel/Coil 1.10Kg/Kg content in. 2 S.S. Bar/Rod. 1.14Kg/Kg content in. C1649 U.V. Sterlizer 1 No. 1 S.S. Sheet/Coil 1.01Kg/Kg content in. C1650 Automobile Ignition Lock 1 No. 1 Zinc Ingots 1.10Kg/Kg content in. 2 Brass Sheet. 1.15Kg/Kg content in.

314 3 Copper Sheet 1.15Kg/Kg content in. 4 CRCA Sheets/Coils 1.20Kg/Kg content in. 5 Non Alloy Steel Rods/Bars. 1.20Kg/Kg content in. 6 Spring Steel Sheet 1.20Kg/Kg content in the export proudct. 7 Polyacetal 1.05Kg/Kg content in. 8 Steel Ball 2 Nos. 9 Lock Pin 1 No. 10 Cap 2 Nos. 11 Latch 1 No. 12 Lock Plates 10 Nos. or 13 Nos. (Net to net) 13 Key Moulded 1 No. or 2 Nos. (Net to net) 14 Tag Key 1 No. 15 Cap Stator 1 No. 16 Stator 1 No. 17 Cam 1 No. 18 Terminal 5 Nos. 19 Housing 1 No. 20 Plate Spring 1 No. 21 Slide 1 No. 22 Cap Outer 1 No. 23 Spring Dowel - Large 1 No. 24 Spring Dowel - Small 1 No. Note: The Components shall be allowed on net to net basis which the firm shall account for in the export product. C1651 Hair Styler Model No No. (0.502Kg) 1 Polycarbonate (MARKROLON 2805 BLACK) C Kg. 2 Polyamide Glass Filled 15% 0.066Kg. (Ultramide) 3 Polyamide (Polyloy) 0.16Kg 4 HDPE (Durethane) 0.027Kg. 5 Polyamide Glass filled 35% 0.012Kg (ultramide). 6 Polycarbonate (Markolon Kg. Black) 7 Polymethylene Oxide ( Delrin) Kg 8 Polyvinyl Chloride (Delrin) 0.009Kg 9 Polyamide Nylon (PA 6 GF 15) 0.009Kg 10 Univ. Master Batch 0.001Kg. 11 Polycarbonate (APECHT) 0.021Kg 12 Heating Element Wire mm 0.00mKg 13 Heating Element Wire Kg.

315 0.26Kgs. B) COMPONENTS 1 Copper Strip DIN X 0.35mm Bristal Bunch for 35mm brush Spring Feeder (RSK) No. 4 Screw PAN 2.2 X 9.5C No. 5 Ferrite ldumping bead No. 6 Stranded wire red - 7strands Stranded wire blue-7 strand Kg Kg Mtrs Mtrs. 8 Wire and Terminal Nos. 9 Insulating Tube (RSK) Mtrs. 10 Fixed Contact No. 11 Fixed Contact No. 12 Rotary contact No. 13 Rotary Contact No. 14 Power Cord - 2core/2PIn No. 15 Metal Cap No. 16 DC Miniature motor- 1000W No. 17 FAc (RSK) No. 18 Pin (RSK) No. 19 Aluminium/Electrolytic Capacitor Paper/Polyester capacitor No. 1No. 21 Diode BY 398 (RSK) No. 22 Switch (RSK) No. 23 Diode in No. 24 Insulating tube for PCB Mtrs. 25 MICA nite Nos. 26 Terminal Nos. 27 Terminal Taping Nos. 28 Terminal Nos. 29 Thermostate (RSK) No. 30 Switch connecting rod No. 31 Speed nut No. 32 Lever Rod connecting Rod No. 33 Heat Cap No. 34 Sticker No. 35 SS Ring No. C315

316 C1652 C1653 Liquidiser Jar Complete for Mixer-Grinder Model No Mixer Grinder with Food Chopper & Liquidiser Jar Model No No. (0.764Kg) 1 No. (2.82Kg) 36 Tube Big Barrel No. 37 Plastic Brinstal Nos. 38 Screw X No. 39 CSK Screw 2.4 X No. 40 Brush Cap (Plastic) No. 1 Polyoxy Methylene (POM Hosta Form C 9021) 0.012Kg 2 Polypropylene Natural (PP Hosta 0.010KG. Len PPN 1060). 3 Acrylonitrilebutadiene Styrene 0.556Kg. Clear( Luran Clear Grey 388 S) 4 LDPE (Evaelvas) 0.018Kg 5 Poly Butylene Terephthalate (Pocan B 7425 PBTP) 6 Poly Oxy Methylene Master Batch B) COMPONENTS 0.005Kg Kg. 1 SINTERED BEARING BUSH 1No. F LIQUIDIZER JAR SS Nracket No. 3 Round head revet for liquidizer 4Nos. jar Cutter upper No. 5 Cutter lower No. 6 Cutter Shaft No. 7 Metal bush Coupling No. 8 Rubber bush coupling Nos. 9 Fibre Washer 7.2 X Nos Copper Spring No. 11 Bronze Washer 7.2 X 11.5 X 0.2 1No Washer 6 X 8.5 X No. 1 Polyoxy Methylene (POM Hosta Form C 9021) 0.112Kg. 2 Polypropylene Natural (PP Hosta 0.112Kg Lene PPN 1060) 3 Acrylonitrilebutadiene Styrene 0.662Kg. Clear (Luran Clear Grey 388 S) 4 LDPE (Evaelvad) 0.018Kg. 5 Poly Butylene Terephthalate (Pocan B 7425 PBTP) 6 Poly Oxy Methylene Master Batch 7 Acrylonitrilebutediene Styrene White (ASA Luran S 778 T) 8 Polyporopylene Black (P Hostalen Black PPN 1060) B) COMPONENTS 0.005Kg. 0.01Kg 0.374Kg KG C316

317 1 Universal Motor -750 W C317 1No. 2 Speed Switch No. 3 Diode BY 252 ZK No. 4 Resistor 150K No. 5 Light Emiting Diode No. 6 Stranded Wire Red VDE strands Strands Wire Black VDE strands Stranded Wire Blue CDE strands Flat Plug No Mtrs Mtrs Mtrs. 10 Thermostat No. 11 Cu Wrapper ZK No. 12 Resistor PTC ZK No. 13 Shrink Tube Cut No. 14 Insulation Leatheroid No. 15 Polyester Foil- 16mm width Capacitor X foil EN Mtrs. 1No. 17 S.S. Clamp No. 18 Pan Screw 4.2 X 16 ZK No. 19 Metal Washer B 4.3 ZK Nos. 20 Slider Plate No. 21 PIN (CAM) No. 22 Screw Counter Sunk 2.9 X No. 23 Pan Screw 3.5 X 16 ZK No. 24 Rubber Legs Nos. 25 Power Cord-2 Core /2 Pin No. 26 Terminal with screws No. 27 Pan screw 2.9 X No. 28 Cord Clamp No. 29 Grooved Pin-Din No. 30 Quick lock washer Nos. 31 Spring ZK No. 32 Cutter Pair No. 33 Round Head Rivet for Chopper Nos. 34 Sealing washer No. 35 Paper Laminated Stricker No. 36 Ball Holder No. 37 Ball ZK No.

318 38 S.s. tube Sleve No. 39 Sintered Bearing Bush for liquidizer No. 40 S.s. Bracket No. 41 Round Head Rivet for liquidizer Nos. 42 Cutter upper No. 43 Cutter lower No. 44 Cutter Shaft No. 45 Metal Bush Coupling No. 46 Rubber Bush Coupling No. 47 Fibre Washer 7.2 X 13 X Nos. 48 Copper Spring No. 49 Bronze Washer 7.2 X 11.5 X No. 50 Washer 6 X 8.5 X No. C1654 Hair Curler Model No No. (0.506Kg) 1 Polycarbonate (MARKROLON 2805 BLACK) 0.097Kg 2 Polyamide Glass filled 15% Kg. (Ultramide) 3 Polyamide (Polyloy) 0.016Kg. 4 HDPE (Durethane) 0.024Kg 5 Polyamide Glass filled 35%(Ultramide) 0.014Kg. 6 Polycarbonate (Markolon 2405 Black) 0.004Kg. 7 Polymethylene Oxide (Delrin) 0.005Kg. 8 Polyvinyl Chloride (decelith) 0.010Kg 9 Polycarbonate Clear(Markrolon 2805) 0.002Kg. 10 Polyamide Nylone (PA 6 GF 15) 0.014Kg. 11 Heating Element Wire mm 0.005Kg. 12 Heating Element Wire Kgs Kg B) COMPONENTS 1 Copper Strip DIN X 0.35MM Kg. 2 Bristal bunch for 35mm brush Kg. 3 Bristal bunch for 48mm brush Kg. 4 Spring Feeder (RSK) Nos. 5 Screw PAN 2.2 X 9.5C No. 6 Ferrite dumping bead No. 7 Stranded wire red- 7 strands Mtrs. 8 Stranded wire blue - 7 stand Mtrs. C318

319 9 Wire and Terminal No. 10 InsulatingTube (RSK) Mtrs. 11 Fixed Contact No. 12 Fixed contact No. 13 Rotary Contact No. 14 Rotary Contact No. 15 Power Cord -2 Core/ 2 Pin No. 16 Metal Cap No. 17 DC miniature motor W No. 18 Fan (RSK) No. 19 Pin (RSK) No. 20 Aluminium Electrolytic Capacitor No. 21 Paper/Polyester Capacitor No. 22 Diode By 398 (RSK) No. 23 Switch (RSK) No. 24 Diode in Nos. 25 Insulating tube for PCB Mtrs. 26 MICA Nite Nos. 27 Terminal Nos. 28 Terminal Taping Nos. 29 Terminal Nos. 30 Thermostat (RSK) No. 31 Switch connecting rod No. 32 Speed nut No. 33 Lever Rod connecting Rod No. 34 Heat Cap No. 35 Sticker No. C1655 Hair Dryer Model No No. (0.510Kgs) 1 Acrylonitrilebutadiene Styrene White (ASA Luran S 778 T) 0.041Kg 2 Polycarbonate Black (Makrolon 0.023Kg Black) 3 Polyamide Glass Filled 35% 0.021Kg. (Ultramid B 35) 4 Polyamide (Zytel FR 720) 0.013Kg 5 Polycarbonate White ( Makrolon 2805 White) 0.122Kg. 6 Polyamide (POlyloy A 709) 0.032Kg. 7 Heating Element Wire mm 0.004Kg. 8 Heating Element Wire Kg B) COMPONENTS 1 Brush with plastic bristle - 1 No. C319

320 Brush with nylon bristle No. 3 Brush round with handle No. 4 Sticker double side No. 5 Screw M 2.6 X No. 6 Ceramic capacitor (Single layer) No. 7 Round Sticker Black No. 8 DC miniature motor W No. 9 Fan moulded No. 10 Thermostate No. 11 Terminal No. 12 Terminal Nos. 13 Micanite- 1width 15.50mm No. 14 Micanite - 2width 12.08mm Nos. 15 Mica Separator Nos. 16 Terminal Nos. 17 PCB Unpopulated No. 18 Diode IN Nos. 19 Diode BY No. 20 Switch PSK No. 21 Rivet B2* Nos. 22 Connecting Terminal No. 23 Cable Sleeve No. 24 Switch Slider No. 25 Cable Tie No. 26 Power Cord- 2 core/2 Pin No. 27 Cord Clamp No. 28 Trilock Screw No. 29 Screw 2.3 X No. 30 Screw 5.3 X Nos. 31 Rubber pad round Nos. 32 Rubber Pad oval No. C1656 Mixer Grinder with food Chopper Model No No. (2.14Kgs) 1 Acrylonitrilebutadienes Styrene White (ASA Luran S 778 T) 2 Polyoxymethylene (POM Hosta Form C 9021) 3 Polypropylene Natural (PP Hosta Len PPN 1060) 4 Polypropylene Black (PP Hostalen Black PPN 1060) 5 Acrylonitrilebutediens Styrene Clear (Luran Clear Grey 388 S) 0.374Kg Kg Kg 0.121Kg 0.066Kg. C320

321 6 Polyoxymethylene Master Batch 0.001Kg B) COMPONENTS 1 Universal Motor -750 W C321 1No. 2 Speed Switch No. 3 Diode BY 252 ZK No. 4 Resistor 150K No. 5 Light Emiting Diode No. 6 Stranded Wire Red VDE Stranded Wire Black VDE Strands Stranded Wire Blue CDE Strands Mtrs Mtrs 0.336Mtrs. 9 Flat Plug Nos. 10 Thermostat No. 11 Cu Wrapper ZK No. 12 Resistor PTC ZK No. 13 Shrink Tube Cut No. 14 Insulation Leatheroid No. 15 Polyester Foil - 16mm width Capacitor X Foil EN Mtrs. 1No. 17 S.s.Clamp No. 18 Pan Screw 4.2 X 16 ZK Nos. 19 Metal Washer B 4.3 ZK Nos. 20 Slider Plate No. 21 PIN (CAM) No. 22 Screw Counter Sunk 2.9 X Nos. 23 Pan Screw 3.5 X 16 ZK Nos. 24 Rubber Legs Nos. 25 Power Cord-2 Core/2 Pin No. 26 Terminal with screws No. 27 Pan Screw 2.9 X Nos. 28 Cord Clamp No. 29 Grooved Pin-Din Nos. 30 Quick lock washer Nos. 31 Spring ZK Nos. 32 Cutter Pair No. 33 Round Head Rivet for Chopper Nos. 34 Sealing Washer No. 35 Paper Laminated Stricker - 1No.

322 C1657 C1658 C1659 Shifted to Electronic Group Valve Seat Insert made of Alloy Steel of following Composition:-(i) Chromium 2, 4-4.8%, (ii) Molybdenum %, (iii) Tungston 0.5%, (iv) Nickel: %, (v) Cobalt: 1.6%, (vi) Boron: 0.3%, (vii) Iron and Carbon: Balance Molybdenum Fine Wire (below 0.5mm Dia) Ball Holder No. 37 Ball ZK No. 38 S.S. tube Sleeve No. 100 Kg. 1 Chromium Metal 3.86Kg 1 High Carbon Ferro Chrome 7.02KG. (chromium Content of 52-60%) 1 Low Carbon Ferro Chrome 5.67kg. (chromium content of 65-70%) 2 Ferro Molybdenum 0.85Kg (Molybdenum content of 60-70%) 3 Ferro Tungsten (with Tungsten 0.67Kg. content of 75%) 4 Nickel pellets/shots 3.06Kg. 5 Cobalt 1.6Kg. 6 Boron 0.3Kg 7 Melting scrap of mild steel 86.8Kg. 1 Kg 1 Molybdenum Wire (above 0.8mm Dia) 1.08Kg. C1660 Ratchet Wheel Plates 1 Kg 1 SS Sheets/Coils made of AISI 1.50Kg. 304 Grade (HR) C1661 Oil Pressure Switch for 1 No. 1 Spring 1No. Motor vehicle 2 Body 1No. C1662 Rod Thermostate of Different size 3 Diaphragm 1No. 4 Rivet Contact 1No. 5 Relevant Screw 1 No. on net to net basis 1 No. 1 MS Terminal Screw 2Nos. 2 Plastic Base 1No. 3 Plastic Cover 1No. 4 Brass Base Plate 1No. 5 Invar Rod of relevant size 1No. 6 Brass Top Plate 1No. 7 Ceramic Striker 1No. 8 Brass Pillar Terminal 1No. 9 Brass Clibration Nut. 1No. 10 Berilium Copper Switch Blade 1No. 11 Silver Contact fixed 1No. 12 Brass Pillar Terminal 1No. 13 Plastic Knob 1No. 14 Silver Contact Moving 1No. C322

323 C1663 C1664 C1665 C1666 C1667 C1668 C1669 PVC Insulated unarmoured control purpose copper cable upto 1.1KV Size: 112/0.275mm (6.8Sq.mm) X 4 Core PVC INsulated Unarmoured Control purpose copper cable upto 1.1KV Size 112/0.30mm (8sq.mm) X 3 Core. PVC Insulated Unarmoured control purpose copper cable upto 1.1KV. Size 72/0.24MM (3.35Sq.mm) X 3 Core PVC Insulated Unarmoured Control purpose copper cable upto 1.1KV, Size72/0.24mm (3.35sq.mm) X 4 core. Harrow Disc Plain Ring Gear Blank made of non alloy steel Stainless Steel 3 container lunchmate C1670 Heat Recovery Rotor (1 No. Heat recovery rotor of 1 cubic meter having flute height of 1.5mm) 15 Epoxy Adhesive 0.12Ml/piece 1000 Mtrs. 1 Copper Cathode/CC Rod/Wire Bars/Ingots. C Kg. 2 PVC Resin 129Kg. 3 Pthalate Plasticize (DOP) 64.5Kg. 4 Fillers (Calcium 21.5Kg. Carbonate/Alumina/Talc/Kaoline ) Mtrs. 1 Copper Cathode/CC Rod/Wire 223.8Kg. Bars/Ingots 2 PVC Resin 126.8Kg. 3 Pthalate Plasticize (DOP). 63.4Kg. 4 Fillers (Calcium 21.13Kgs. Carbonate/Alumina/Talc/Kaoline 1000 Mtrs. 1 Copper CAthode/ CC Rod/Wire Kg. Bars/Ingots 2 PVC Resin Kg. 3 Pthalate Plasticize (DOP) Kg. 4 Fillers (Calcium Kg. Carbonate/Alumina/Talc/Kaoline ) Mtrs. 1 Copper CAthode/C Rod/Wire Kg. Bars/Ingots. 2 PVC Resin 114.6Kg. 3 Pthalate Plasticize (DOP) 57.3Kg. 4 Fillers (Calcium 19.1Kg. Carbonate/Alumina/Talc/Kaoline ) 1 Kg. 1 Alloy/Non Alloy Steel Plates of relevant grade 1.2Kg 1 Alloy/ Non Alloy Steel Billets 1.40 kg 1 Kg 1 Non Alloy Steel Bars 1.03 Kg. 1 No. 1 Stainless Steel of relevant grade Kg/Kg content in. 2 Getter Pills 1No. net to net 3 Polypropylene Granules 1.05 Kg/1.05Kg content in the export product. 1 No. 1 Aluminium Foil/Foil Stock Kgs/per Cubic meter of media. 2 Molecular Sieve (Powder/Pellet)/Silica Gel Powder) Net to net 3 Clear Water based catalysed coating with relevant catalyst Kgs. per Cubic metre of media. 4 Relevant Adhesive Ltrs./per Cubic metre of media. 5 Relevant Thinner/Solvent Liters per Cubic metre of media. Note: In case of "Sensible" Heat Recovery Rotor, the input with quantity appearing at import item No. 1

324 & 4 shall only be allowed. C1671 Heat Recovery Wheel (1 No. Heat recovery wheel incorporating Rotor of 1 Cubic Mtr. volume having 1.9mm flute height). 1No. 1 Aluminium Foil /Foil Stock Kgs./per Cubic Metre of Media. 2 Molecular Sieve (Powder/Pellet)/Silica Gel Powder) Net to net 3 Clear water based catalyzed coating with relevant catalyst. C Kgs. per Cubit metre of media. 4 Relevant Adhesive 99.5 Litres/per Cubic metre of media. 5 Relevant Thinner/Solvent 13.10Litres per cubic metre of media. 6 Gear Motor 1 No. 7 Speed Controller for Motor 1 No. In case of "Sensible" Heat Recovery Wheel, the input with quantity appearing at import item No. 1 & 4 shall only be allowed. C1672 Asbestos Brake Linings 1 MT 1 Asbestos Raw.70 MT. (Rubberised with Nitrile Rubber) 2 Nitrile Butadine Rubber (NBR).22 MT C1673 C1674 C1675 Tin Alloy Ingot/ Anode/ Bar/ Slabs/ Pig Bourdon Sensing Pressure Gauge Anchor Plate for Dredging made of CR Non Alloy Steel. 1 Kg. 1 Tin Ingots 1.02 Kg/Kg content in the resultant product. 1 Tin Scrap 1.06 Kg/Kg content in the resultant product. 2 Antimony Ingots Kg/Kg content in the resultant product. 3 Copper Scrap 1.06 Kg/Kg content in. 3 Copper Wire Bar/Cathode 1.02 Kg/Kg content in the resultant product. 4 Lead Scrap 1.06 Kg/Kg content in the resultant product. 4 Lead Ingots Kg/Kg content in the resultant product. 5 Zinc Scrap 1.06 Kg/Kg content in the resultant product. 5 Zinc Ingots/Slab 1.02 Kg/Kg content in. 6 Bismuth (Elemental Form) 1.02 Kg/Kg content in. 1 No. 1 Bourdon Tube 1 No. 2 Diaphragm 1 No. 3 Pointer 1 No. 1 No. 1 Cold Rolled Non Alloy Steel Sheets/Wide Coils/Strip. C1676 Taps of high speed steel 1 No. 1 HSS ground blanks of relevant grade and size for taps Kg. 1NO.

325 C1677 C1678 C1679 C1680 C1681 (A) PVC Insulated Unarmoured Control purpose copper cable core area 1.62 Sq.mm. Size: 35/0.24mm X 4 Core(B) 2 Core X 1.5Sq.mm PVC Insulated & Sheathed cable with 1.0Sq.mm EArth conductor Platinum/Rhodium/Palla dium Catalyst Gauzes of different composition. Ferro Aluminium Power driven centrifugal Pump with motor or frame size 1071 (0.5HP). Power driven centrifugal pump with motor of 1000 Mtrs For export item (A) 1) Copper Cathode/CC Kgs. Rods/Wire Bar/Ingot. 2) PVC Resin 87.3 Kg. 3) Pthalate Plasticiser (DOP) Kg. 4) Fillers (Forcal) Kg. For export item (B) Kgs. 1) Copper Cathode/CC Rods/Wire Bar/Ingot. 2) PVC Resin Kgs. 3) Pthalate Plasticizer (DOP) Kg. 4) Fillers (Forcal) Kg. 1 Kg. 1 Platinum metal 1.01 Kg. per Kg. content in the export product. 2 Pallaidum 1.01 Kg/Kg content in. 3 Rhodium in powder form 1.01 Kg/Kg content in. 1 Kg. 1 Aluminium Scrap (Taint & Tabor) C kg/kg aluminium content in Ferro Aluminium 2 Mild Steel Scrap kg/kg Iron (Fe) content in Ferro Aluminium 1 No. 1 Cold Rolled Non- oriented 8 Kgs. (CRNO) electrical Steel in Coil form Sheet in coil form. 2 Copper wire bars/cathodes/rods/winding/wi nding wires/strips Kgs. 3 a) Electrolytic Grade Aluminium Kgs. ingot for rotor. b) Commercial grade Aluminium Kgs. ingot for housing. 4 Stainless Steel Rod for Shaft Kgs. 5 Relevant Ball/Sleeve/Roller Bearings. 6 Insulation material consisting of paper, Nylon, Polyester, Amide, Nomex Film, Varnish, Polyester Cord, tape. 7 Packing material-craft paper Lable, Name Plate, Ribbon 8 Motor Protectors/Thermal Protectors. 2 Nos. 9 Power Capacitors. 1 No. 10 Plastic Insulated Wire/Cable. 6 mtrs. 11 Terminals, Connectors. 8 Nos. CIF value restricted upto 5% of FOB value. As per packing policy. 1 No. 12 Non ferrous impeller -Copper 0.567Kgs. a) Tin Kgs. 13 Mechanical Seal 1No. 1 No. 1 Cold Rolled Non-oriented (CRNO) electrical Steel Sheets 4.5Kgs.

326 C1682 C1683 frame size 1063 (0.5HP). Power driven centrifugal pump with 0.75 HP motor. Power driven centrifugal pump with 1HP motor. Sheets in Coil Form. 2 Copper wire 0.822Kgs. bars/cathodes/rods/winding/wi nding wires/strips. 3 a) Electrolytic Grade Aluminium 0.493Kgs. ingot for rotor. b) Commercial grade Aluminium 0.492Kgs. ingot for housing. 4 Stainless Steel Rod for Shaft Kgs. 5 Relevant Ball/Sleeve/Roller Bearings. 6 Insulation material consisting of paper, Nylon, Polyester, Amide, Nomex Film, Varnish, Polyester Cord, Tape. 7 Packing material-craft Paper Lable, Name Plate, Ribbon 8 Motor Protectors/Thermal Protectors. 2Nos. 9 Power Capacitors. 1No. 10 Non Ferrous impeller (a) Copper (b) Tin Upto 1.5% of FOB value As per packing policy. 1No Kgs Kg. 11 Mechanical Seal 1 No. 1 No. 1 Cold Rolled Non- oriented 10.01Kgs. (CRNO) Electrical steel sheets Sheets in Coil Form 2 Copper Wire Bars/Cathodes/Rods/Winding/Wi nding wires/strips. 1.36Kgs. 3 a) Electrolytic Grade Aluminium 0.74Kgs. ingot for rotor. b) Commercial grade Aluminium 0.74Kgs. ingot for housing. 4 Stainless Steel rod for Shaft Kgs. 5 Relevant Ball/Sleeve/Roller Bearings. 6 Insulation material consisting of paper, Nylon, Polyester, Amide, Nomex Film, Varnish, Polyester Cord, Tape. 7 Packing material-craft paper Lable, Name Plate, Ribbon 8 Motor Protectors/Thermal Protectors 2Nos. 9 Power Capacitors 1No. 10 Plastic Insulated Wire/Cable. 6Mtrs. 11 Terminals, connectors. 8Nos. 12 Non ferrous impellers (a) Copper (b) Tin 13 Mechanical Seal 1No. 1 No. 1 Cold Rolled Non-Oriented (CRNO)Electrical Steel Sheets Sheets in Coil form. upto 1.5% of FOB Value. As per packing policy. 1No Kgs Kgs. 12Kgs. C326

327 C1684 C1685 Shifted to Electronic Group Ultra Press 2 Copper Wire 1.975Kgs. bars/cathodes/rods/winding/wi nding wire/strips. 3 a) Electrolytic Grade Aluminium 1.127Kgs. ingot for rotor. b) Commercial grade Aluminium 1.126Kgs. ingot for housing. 4 Stainless Steel rod for Shaft. 1.40Kgs. 5 Relevent Ball/Sleeve/Roller bearings. 6 Insulation material consisting of paper, Nylon, Nomex Film, Varnish, Polyester Cord, Tape. 7 Packing material - Craft paper Lable, Name Plate, Ribbon 8 Motor Protectors/Thermal Protectors. C327 2Nos. 9 Power Capacitors. 1No. 10 Plastic Insulated wire/cable. 6Mtrs. 11 Terminal Connectors. 8Nos. 12 Non Ferrous impeller (a) Copper (b) Tin upto 1.5% of FOB Value. As per packing policy. 1 No Kgs Kg. 13 Mechanical Seal. 1No. 1 No. 1 Eddy Current meter 1No. 2 Cluth Break 1No. 3 Overload Protector 1No. 4 Fly Wheel 1No. 5 Carbon Steel of relevant grade. 1.05Kg/Kg content in. 6 AG Break Motor 1No. 7 Rotary Cam Switch 1No. 8 Slide Counter 1No. 9 Motor Lubrication unit 1No. 10 Bearing case 1No. 11 Spherical Roller Bearing. 1No. 12 Ball Bearing. 2No. 13 C Roller Bearing. 1No. 14 Surge Tank 1No. 15 Alloy Steel of relevant grade. 1.05/Kg content in. 16 Front GIB Plate right hand 1No. 17 Front GIB Plate for 100T Press 1No. left hand 18 GIB Plate Rod 2Nos. 19 MS Plates 1.05/Kg content in. 20 Gear End Plate 1No.

328 21 Cylinder 1No. 22 Worm wheel 1No. 23 Dual Solenoid valve 1No. C1686 C1687 C1688 C1689 C1690 C1691 Mineral Insulated 1 No. 1 RTD Element of relevant 1 No. Resistance Temperature specification Detector (RTD) Assembly Tungsten Contact having 1 kg. 1 Tungsten Rod 0.95kg 55%+/-2% Tungsten by weight 2 Abrasive Wheel 3Nos. Deleted Monocular/Binocular Microscope Drive Shaft Assembly, Front Wheel Drive- LH/RH without ABS Ring. Drive Shaft Assembly, Front Wheel Drive- LH/RH with ABS Ring Sets 1 Halogen Lamp (6 V or 12V Nos. 20W or 30W) 2 Stainless Steel Hard Wire 32Kgs. 1.60mm 3 Stainless Steel Hard Wire 32Kgs. 1.00mm 4 Stainless Steel Hard Wire 32Kg. 4.00mm 5 Step -down transformer/power 1000Nos. supply Unit input 120 V or 240 V out put 6 V or 12 V. 6 Power Cord with Plug. 1000Nos. 7 On-Off switch 1000Nos. 8 Relevant Achromatic objective 1000 Sets lens. 9 Lamp Holder 1000Nos. 10 Socket with fuse. 1000Nos. 11 Polyurethane Paint/Grease, Stainless Steel Screws, Circlips, Spring Washers, Hardened & Straightened Ground Shaft upto 5mm Dia, Strain Relieves Adhesive, Rubber or Plastic parts and Connectors Upto 4% of FOB Value. 12 Raw Optical Glass kg 1 pair 1 C/V Joint Boot Seal 2Nos. 2 T/P Boot Seal 2Nos. 3 Clamps 6Nos. 4 Molykote VN 2461 C Lithium 0.25Kg. Grease 5 C V Joint Grease 0.25Kgs. 6 Shaft Ring Blank 2Nos. 7 T/P Housing Blank 2Nos. 8 C/V Outer Race Blank. 2Nos. 9 Spider Tripot Joint 2Nos. 10 C/V Inner Race. 2Nos. 1 pair. 1 C/V Joint Boot Seal 2Nos. 2 T/P Boot Seal 2Nos. 3 Clamps. 6Nos. C328

329 C1692 Stainless Steel LPG Stove with /without auto ignition. 4 Molykote VN C Lithium Grease C Kg. 5 C V Joint Grease 0.25Kgs. 6 Shaft Ring 2Nos. 7 T/P Housing Blank 2Nos. 8 C/V Outer Race Blank 2Nos. 9 Spider Tripot Joint. 2Nos. 10 C/V Inner Race 2Nos. 11 ABS Ring 2nos. 1 No. 1 Stainless Steel Sheet/Coil of relevant grade 2 Gas Valve with/without Ignition Unit. 1.15Kg/Kg content in. Net to net with accountability 3 Brass Honey Scrap 1.06Kg/Kg content in. If the product is exported without Auto Ingnition Unit, the import item no.2 viz. Gas Valve shall be allowed without ignition Unit. C1693 Hot Forged Steel nuts 1 No. 1 Forged Blank Nut without thread 1No. of relevnt grade of alloy/non alloy steel and of relevant size. C1694 Copper Bonded Ground 1 kg. 1 MS Bright Bars/Wire Rods. 0.97Kgs. Rods UL approved (0.01 inches copper coating). 2 Copper Bar/Cathodes/Wire Bars. 0.08Kgs. C1695 Transformers upto 500 VA 1 No. 1 CRGO/ CRNO Lamination E & I Strips 1.10 kgs/kg content in. CRGO/ CRNO Steel Sheet/Coils 1.07 kgs/kg content in. 2 Relevant Copper Wire (Coated including enamelled / self solderable enamelled or uncoated) 3 Mylar Polyester film of relevant thickness and width 4 Electrical Grade Insulating Tape (18 to 45 mm width, with or without adhesive) 1.01 kgs/kg content in Mtrs/ Mtr content in the export product Mtrs/ Mtr content in the export product. 5 Relevant Nylon 66/ Polybutalene 1.02 kgs/kg content Terrapthe-late/ Polyethylene in Terrapthelate/Nylon6/Polyphenyl ene Sulphide/PET Bobbin Net to Net 6 Deleted 7 Relevant PVC or Lead Wire / Cable 8 a) PVC Sleeve Net to net 1.01 Mtrs/Mtr content in the export product b) Terminal Net to net Insulated Faston Terminals/fully vinyl Insulated Female disconnects 250 Series Net to net 9 Electrical Insulating Paper/ 1.02 Kgs/kg content

330 C1696 C1697 C1698 Turbocharger Nickel Cadmium Cells (Sintered plate) 1.2 Volts as per European Standard EN 2570 or equivalent. Aluminium Alloy Cast Flanges. C mm KB 10 Photographic Camera. Nomex paper of relevant GSM 10 Housing Net to net 11 Varnish/Epoxy Resin/Thinner/Hardener /Lacquers 1 No. 1 Shaft & Wheel. 1No. 2 Hoising Turbine Casting 1No. For 100 Ampere Hour. 3 Seal, Split Ring. 1No. 4 Collar Thrust. 1No. 5 "O" Ring 1No. 6 Circlip 1No. 7 Slinger, Oil 1No. 8 Nut lock 1 No. 9 Impeller 1No. 10 Seal, Split Ring. 1No. 11 Thrust Bearing 1No. 12 Journal Bearing 1No. 13 Retaining Ring. 1No. 14 Pin roll 1No. 1 Nickel Fibre Mat Fibrex 6.25SFT. Nickel Powder Type 0.7Kg 287/255/210 2 Non -Woven Separator 2.81 M2 in CIF value limited to 1% of FOB value 3 Nickel Powder Type 0.625Kg. 287/255/210 4 Celgard 3400/3500 film. 2.5M2. 5 Vented Filler Caps. 1No. 6 Nylone Moulding Granule/Powder. 1 Kg. 1 AluminiumAlloy ingots/ scrap of relevant grade 0.512Kg Kg/ kg content in. a) Aluminium Ingots 1.10 kg/kg content in. b) Relevant alloying elements such as silicon metal, manganese metal, magnesium metal etc. 1 No. 1 Black Polyester Film (0.135x23 mm) 2 Transformer KB10 1 No. 3 Lens Meniscus- Front 1 No. 4 Lens Meniscus- Black. 1No. 5 Spring High Energy. 1No. 6 Reflector 1No. 7 Lense, Objective 1No. 8 Lense, Eye. 1No kg/ kg content in Meter C330

331 9 Spring Shutter Return. 1No. 10 High Voltage Diode. 1No. C1700 C1701 C1702 C1703 C1704 C1705 Shifted to Electronic Group Ferro Calcium Cored Wire (containing calcium 11 Spring Contact- Battery, Negative 1No. 12 Neon Lamp 1No. 13 Trigger Transformer (KB 10). 1No. 14 Reflector Cover. 1No. 15 Reflector Mount. 1No. 16 Capacitor, Ceramic, 1000pF. 1No. 17 Capacitor, Electrolytic, 160uF. 1No. 18 Flash Tube, Xenon Gas. 1No. 19 Transistor Power 2 S D965 1 No. 20 Lubricomp PDX-D-5373 KOD BK SS Strip.007" X 1.25" T 301 1/2 H 22 SS Strip 0.006" X 1" Plated with Nickel. 1.15gms. 1.14gms. 0.37gms. 23 SS 0.008"X1.65" CT 301 1/2 H 2.83gms. 24 CU-Ni Alloy Strip 0.015" X 1.875" EK gms. 25 K20 Foam Sheet 3 mm thick 560 Sq.mm 1 Kg 1 Calcium Metal Granules (Ca content 98% min). 1.02Kg/Kg Calcium Granules content granules & Iron Powder) 2 Iron Powder 1.015Kg/Kg Iron powder content. Silver Contacts/Silver Alloyed contacts or Wire/Silver profiles contacts/silver Bimetal Contacts/Silver Bimetal Profiles/Sheet Contacts/Silver Contacts on Carrier/Silver Alloyed Contacts on Carrier/Non- Ferrous Metal Contacts. Lacquered Electrolytic Plate Sheet. Copper Clad/Coated Steel Wire Single or Stranded having single wire less than 0.5mm dia. 1) Resistance wire: single or stranded or wound on Fibre Glass Core having single wire less than 1 Kg. 1 Unwrought Silver having purity more then 99.9%. 2 Any other relevant metal(s)/alloying metals(s) 1 Kg. 1 Electolytic Prime Quality Tinplate of relevnt thickness. 1.03Kg/Kg content of silver in the export product. 1.03Kg/Kg content of relevant metal/alloying metal in. 1Kg. 2 Relevant Lacquer. 0.01Kg. 1 Kg. 1 Copper Clad/Coated Steel wire more than 1mm diameter. 2 Wire Drawing Dies, Drawing Lubricants welding Dies. 3 Plastic Bobbins, Plastic Spools, protecting paper/films. 1 Kg. 1 a) Copper Nickel Alloy Wire 1.00mm or more diameter Nickel Chromium Alloy Wire 1.00mm or more diameter. 1.02Kg. 2% of the FOB vlaue of export. As per packing policy. 1.00Kg. 1.00Kg. C331

332 0.5mm, using(a) Copper Nickel Alloy(s) (b) Nickel Chromium Alloy(s). 2 Alloy Master batches/wire Drawings Dies/ Welding Dies Glass Fibre Yarn. 3 Plastic Bobbins, Plastic Spools, Protective paper/film, drawing Lubricants. C332 2% of the FOB value of export. As per packing policy. Import of Alloy in 1 (a) or (b) will be allowed depending on the alloy used in (a) or (b). C1706 Pump set with AC SQ 1 Set. 1 AC SQ Induction motor of 1 No. Induction motor. relevant wattage & Speed. C1707 AA Alkaline Battery 1 No. 1 Electrolytic Manganese Dioxide gms. (24gms) 2 Zinc Powder 4.12gms. C1708 Cooling Tower complete including in completely 1 No. (weight 3 Potassium Hydroxide Flakes. 1.6gms. 4 Zinc Oixide Powder 0.07gms. 5 Crystalline Graphaite 0.628gm. Powder/Synthetic/Natural Graphite. 6 Gallant Powder/Galling Agent I 0.043gm. & II 7 Indium Acetate Powder gm. 8 Sealent/Asphati Piton C/A & 0.04gm. P/T. 9 Surfactant gm. 10 Paper for laminated Non-Woven 0.172gms. Separator/(Main & Bottom) 11 Nickel Plated Steel Cane Non Alloy Steel Sheet. 1No. 5.9gms. 12 Tin Plated Brass Wire/Conductor 0.43gm. 13 Nylon/Plastic Top. 1No. 14 Re-inforcing Support Ring Nickel Chromium Alloy Wire 1No. 1.26gms. 1.00mm or more diameter. 15 Negative Steel Cap Non Alloy Steel Sheet. 1 No gms. 16 PVC Shrink Foil/Shrink Sleeve. As per packing policy. 17 PVC Label Self Adhesive PVC Sheet for 1No. 4.2Sq.inch. Label. 18 Duplex Board for packing. As per packing policy. 19 Carbon Coating/Carbon Paste gms. 20 NS Clean 1% of FOB value, if non alloy steel sheet for cap, can & ring are imported) 21 Press Oil 1% of FOB, if non alloy steel sheet for cap, can & ring are impoorted. 1 Isopthalic Polyester Resin. 630gm/Kg GRP Component content

333 knocked down condition, with or without accessories and other parts. alongwith contents of various input to be indicated). 2 Glass Roving/chopped strand mat/surface mat/woven rovings. in the export. 420gm/kg GRP component content in 3 Polypropylene. 1.05Kg/Kg polypropylene component content in. 4 PVC Fill Sheet 1.05Kg/Kg PVC fill sheet component content in the export product. The following inputs with their quantity for making 1Kg. of PVC fill sheet:- a) PVC Resin (Suspension Grade) 0.945Kg. b) Titanium Dioxide Kg. c) Processing Aid Kg. d) Impact Modifier 0.014Kg. e) Paraffin Wax Kg. f) Calcium Citrate Kg. g) Lubricant/Heat Stabiliser Kg. h) Filler (Calcium Carbonate) 0.021Kg. i) Carbon Black Kg. 5 Relevant Bearings Net to net basis with accountability clause. 6 Plywood/Pine Lumber 1.05 cub.meter/cub.meter content in the export product 7 SS Tube of relevant size 1.02 Mtr./Mtr. content in the export product. C1709 Suspension Hanger made of Stainless Steel Wire- Stainless Steel Plates/Sheets 1.05 kg/kg content in 8 Mild Steel Universal 1.05 kg/kg content 9 Arsenic Pentaoxide Kg/M3 of Plywood / Pine Lumber used 10 Cabosil/Fumed Silica Upto 2% of the quantityof isophthalic Polyester Resin used 11 Foam Core Resin Upto 2% of the quantity of glass roving/chopped strand mat/surface mat/woven roving used 1 Kg. 1 Stainless Steel Wire Rods- Grade AISI 302 C Kg/Kg content in.

334 C1710 C1711 C1712 C1713 C1714 C1715 C1716 Grade AISI 302. Polyesterimide Enamelled Copper 1 Kg. 1 Copper Wire Rod/Cathodes Kg/Kg content in. Wire/Strip. 2 Polyestermide Enamel Kg/Kg content in. Plastic (Ethylene Copolymer) Clad/ Coated Tin free Steel Tapes for cable armouring containing 93% Tin free Steel and 7% plastic Bathroom jali with frame size 20Cm X 20 Cm made of stainless steel sheet grade AISI 430. Ventilation jali with frame having hole made of stainless steel sheetgrade AISI-430. High Chromium Valve Seat inserts with Chromium content 35% or more. Abrasive Stone with Grain Bond of ratio 57:43. Aluminium Conductor 1C x 300 Sq.mm 11/11KV (UE) XLPE insulated and screened, aluminium wire screeing over insulation and armouring ALXLPE PVCS, AWA PVC Cable Minimum export weight 1 Kg 1 Tin Free Steel / Wide Coils 1.06 Kg/Kg content in. 2 Plastic (Ethylene Co-Polymer) 1.05 Kg/Kg content in. 1 Kg. 1 Stainless Steel Sheet Grade Kg/Kg content in. 1 Kg. 1 Stainless Steel Sheet Grade AISI Kg/Kg content in. 1 MT. 1 M.S. Scrap Kg. 2 Carbon Kg. 3 Ferro L.C. Chrome Kg. 4 Ferro H.C. Chrome Kg 5 Pure Chromium 749 Kg. 6 Ferro Molybdenum Kg. 7 Nickle Kg. 8 Cobalt Kg. 9 Ferro Tungsten Kg. 10 Tungsten Kg. 11 Boron Kg 1 Kg. 1 Silicon Carbide Kgs. 1 Metre. 1 EC Grade Aluminium Rod/Ingots Kg/Metre. 2 Commercial Grade Aluminium Kg/Metre. Rod/Ingots. 3 XPE Semi Conducting Kg/Metre. compound. 4 XLPE Insulation Kg/Metre. 5 PVC Resin Kg/Metre Kg/Km. 6 DOP Kg/Metre. C1717 Aluminium Conductor 1C x 300 Sq. mm 19/33 KV (E) XLPE insulated and screened, aluminimum wire screening over insulation 1 Meter. 1 EC Grade Aluminium Kg/Metre. Rod/Ingots. 2 Commercial Grade Aluminium Kg/Metre. Rod/Ingot 3 XLPE Semi-Conducting Compound Kg/Metre. 4 XLPE Insulation Kg/Mtr. C334

335 and armouring ALXPE PVCs AWA PVC Cable - Minimum export weight 3850Kg/Km. C1718 Aluminium Conductor 3 core X 185Sq. mm 11/11 KV (UE) XLPE insulated and screened, aluminium wire screening over individual core ALXPE PVCs FPVC cable minimum export weight Kg/Km. C1719 Aluminium Conductor 3 Core X 70 Sq. mm 11/11 KV(UE) XLPE insulated and screened, aluminium wire screening over individual core ALXPE PVCs FPVC cableminimum export weight 4300Kg/Km. C1720 C1721 C1722 C1723 C1724 C PVC Resin Kg/Mtr. 6 DOP Kg/Mtr. 1 Metre. 1 EC Grade Aluminium Kg/Metre. Rod/Ingots. 2 Commercial Grade Aluminium Kg/Metre. Rod/Ingots. 3 XLPE Semi-conducting Kg/metre. Compound. 4 XLPE Insulation Kg/Metre. 5 PVC Resin Kg/metre. 6 DOP Kg/Metre. 7 Galv Flat Steel Wire Kg/Metre. 1 Mtrs. 1 EC Grade Aluminium Kg/Metre. Rod/Ingots. 2 Commercial Grade Aluminium Kg/Metre. Rod/Ingots. 3 XLPE Semi-conducting Kg/Metre. Compound. 4 XLPE Insulation Kg/Metre. 5 PVC Resin Kg/Metre. 6 DOP Kg/Metre. 7 Galv Flat Steel Wire Kg/Metre. Cabinet parts made of 1 Kg. 1 Galvanised relevant steel sheets Kgs. Galvanised Steel Sheets. 2 Relevant fastners. Net to net. Contact element for electrical/electronic switches. Pilot Light (containing relevant Zinc Alloy). Differential Bevel Gears made of Alloy Steel (B 1 No. 1 Nylon 66 or PBT Plastic Powder Kg/Kg content in. 2 Brass Strip/Rod 1.05 Kg/Kg of brass in. 3 Master Batch powder Kg/Kg of the. 1 No. 1 Zinc Alloy 1.07 Kg/Kg content in. 2 Nylon 66 or PBT Plastic Powder Kg/Kg content in. 3 Poly-Carbonate plastic powder Kg/Kg content in. 4 Brass Strip Kg/Kg content in. 5 Relevant Silicon Rectifier Diodes Net to net. (1 AMP). 6 Relevant Chip Resistor. Net to net. 1 No. 1 Alloy Steel Bars of relevant Grade. C Kg/Kg content in. forging Process) 2 All Consumables including dies. CIF value restricted upto 8% of the FOB Value. Deleted Polyester tap lapped, 1 Kg. 1 Glass Fibre Yarn. 1.01Kg/Kg content in Nomex paper covered,. fibreglass covered 2 Nomex Armid paper. 1.01Kg/Kg.

336 C1726 C1727 C1728 C1729 varnish bonded aluminium conductors GDS Clamp 1 No. 1 Wire protect Nos. 2.5Qmm 3 Pole Grey, 2 Contact Pin Nos / /PW 3 Screw 3 X 4.5mm Nos (weighing 2.79grams). 4 Polyamide 6.6 Grey gms Terminal Block 35 Qmm/3x10Qmm/ / /PW of diferent colour (weighing 55.2 grams) Side Entry Clamp 2.5mm2/ Cage Clamp connection / /PW/ of different colour (weighing 3.96gms.) Silica Bricks/Shapes for Glass Melting Furnace C1730 Glass Fibre Reinford Plastic Pipe with coupler (containing minimum 75% of glass fibre required for deep well hand pumps). C1731 Magnesium cored wire (containing mangesium granules having Mg. content 99% min.). C1732 Ferro-Silica-Calcium ( FESICA) Cored Wire (containing FESCICA alloy powder having Ca %, Si %, Fe. 4% min. and A1. T. P & S:traces). C1733 Cold Rolled Grain Oriented (CRGO), fully processed, Silicon- Electrical Alloy Steel Sheets/Strips/Wide Coils with insulating coatings of inorganic/organic 1 No. 1 Cage Clamp Nos. 2 Copper STrip Sn/Pb Coated gms. 3 Polyamide 6.6 of different 23gms. colours No. 1 Cage Clamp Nos. 2 Current Bar No. 3 Polyamide 6.6 of different colours C gms. 1 MT. 1 Quartzite 1570 kg 2 Hydrated Lime 79 kg 3 Silicon Carbide Powder 3. Silicon Metal Powder 20 kg 15 kg 4 Dextrine 4. Gaulac 20 kg 9 kg. 5 (a) Alloy Steel Mould 0.03 No. (b) Wooden Mould 0.01 No. 1 MT 1 Relevant Glass Fibre. 765Kg. 1 Kg (Granule content). 1 Kg (alloy/powde r content). 1 Magnesium Metal Granules (Mg. content 99% min). 1 Ferro-Silica-Calcium (FESCICA) Alloy powder (containing Ca: 28-33%, Si: 57-65%, Fe: 4% min and Al., Ti, P & S : traces) Kg. 1 Cold Rolled Decarburized, Magnesium Oxide (MgO) coated, Silicon Electrical Alloy Steel Strips/ Wide Coils of relevant grade containing 2.5% to 3.5% Silicon 2 Relevant Inorganic/Organic coating material. 1.02Kg/Kg content. 1.02Kg/Kg content. 1100Kgs. 10Kg.

337 C1734 meterial. Non Cast Hardware Fittings made of Non Alloy/Alloy/Stainless Steel Rod 1 Kg. 1 Non Alloy/Alloy/Stainless Steel Rod of relevant grade 2 Cutting and profile machine tools: viz (a) Cutters (b) Carbide Tips (c) Drils (d) H.S.S. Taps. C1735 Pin made of Carbon Steel 1 Kg. 1 Carbon Steel Sheet/Strip or relevant grade. C1736 Deleted C1737 Deleted C1738 Deleted C1739 Shifted to Chemical Group C1740 C1741 Handle Assembly made of Stainless Steel for operation of Butter Fly Valve. Coaster Brake Hub for Bicycle containing 263gm of item 1 and 608 gm of tiem 2 1 No. 1 Stainless Sheet/Strip/Wide Coils made out of relevant grade. 1 Piece. 1 Non Alloy Steel CRCA/HR Sheet/Coil (Second/Defective) C Kg. 2% of the FOB value Kg/Kg content in Kg/Kg content in. 513 Gms. 2 MS/Non Alloy Steel Round/Rod. 1277Gms. All the conditions given in note 1 to 8 below SION at C-122 will also be applicble for this SION. C1742 Industrial Boiler/Sub 1 No. COMPOMENTS: assemblies of the Boilers. 1 Pump/ Pump with motor Net to net. 2 Level Switch Net to net. 3 Level Gause Net to net. 4 Flame Relay with base plate. Net to net. 5 Gas Train. Net to net. 6 UV Detector. Net to net. 7 Flexible Cables. net to net. 8 Float. Net to net 9 Stainless Steel Pressure Spring. Net to net. 10 Burner Net to net. 11 Temperature Controller/ Net to net. Temperature indicator 12 Burner Rod Assembly Net to net. 13 Gate/ Globe Valve Net to net. 14 Straight Way Valve Net to net. 15 Safety valve Net to net. 16 Open Bonnet. Net to net 17 Blowdown Valve Net to net 18 Disc Check Valve. Net to net. a) Ignition electrode Net to net b) Oil Flow Meter Net to net 19 RAW MATERIAL: BQ Steel plates (Carbon Steel Plate) 1.05Kg/Kg content in. 20 Welding Electrodes and/or 2% of the weight of

338 C338 Welding Wire. 21 Steel Tubes/Pipes of relevant grade and size. the relevant steel to be welded Metre/mtr content in the export product Metre/Mtr content in the export product. Note: Wherever Welding Wire is asked for import Welding Flux may also be allowed for import equal to the quantity of Welding Wire. C1743 Motorized three wheelers in CBU/CKD/SKD condition powered by diesel engines of capacity from 300 c to 550cc. 1 No. RAW MATERIAL:- (1) HR/CR Sheet/Strips/Coils. 1.19Kg/Kg content in. 2 Aluminium Alloy Ingot. 1.07Kg/Kg content in. 3 Seamless Steel Tube of relevant Net to net. dia, thickness and grade. 4 Butyl Rubber 1.05 kg/kg content in. 5 Isocyanate 1.05 kg/kg content in. 6 Natural Rubber 1.05 kg/kg content in. 7 Polyol 1.05 kg/kg content in. 8 Relevant Synthetic Rubber (NBR/ PBR) 1.05 kg/kg content in. 9 Relevant Paints 6.05 Ltrs for one number of export product. COMPONENTS: 10 Main shaft assembly Net to net 11 Front Wheel Axle Assembly Net to net 12 Hub Pin Set Net to net 13 Differential Gear Net to net 14 Front Brake Drum Net to net 15 Rear Wheel Axle Assembly Net to net 16 Slider block. Net to net 17 Propeller Shaft (LH+RH) Set. Net to net 18 Hydraulic Brake Assembly. Net to net. 19 Shock Absorber Rear (1set = Net to net 2No.) 20 Shock Absorber Front. Net to net 21 Gas Spring. Net to net. 22 Ball Brg Net to net. 23 Ball Brg ZZ. Net to net. 24 Ball Brg Net to net 25 Speedometer. Net to net. 26 Control Cable (Set of 11) Net to net. 27 Rear View Mirror Assembly. Net to net. 28 Wire Harness Main. Net to net.

339 29 Wire Harness Dashboard. Net to net. 30 Battery Cable Negative. Net to net. 31 Battery Cable Positive. Net to net. 32 Electrical Cable & Wires Set. Net to net. 33 Spring Front Suspension. Net to net. 34 Automotive Switchs Set. Net to net. 35 Automotive Bulb (set of 13) Net to net. 36 Automotive lights (Set of 10) Net to net. 37 Lock Set with keys. Net to net. 38 Horn 12 V Dia 90 Net to net. 39 Tool Kit Set. Net to net. 40 Needle Bush-Main Housing. Net to net. 41 Needle Bearing-Crankcase, Front Wheel. Net to net. 42 Needle Bearing Rear Wheel/Hub. Net to net. 43 Needle Bush JL 188 NRB. Net to net. 44 Inner Ring-Cluster Gear. Net to net. 45 Battery 50 AH. Net to net. 46 Wiper Blade with Arm. Net to net. 47 Wiper Motor. Net to net. 48 Wiper Motor Mounting & Linkage Assembly. Net to net. 49 Windshield Glass. Net to net. 50 Voltage Regulator. Net to net. 51 Side Window Glasses (Set of 2) Net to net. 52 Rear Window Glass. Net to net 53 Front Wheel Hub. Net to net. 54 Rear Wheel Hub Net to net. 55 Differential Cage. Net to net. 56 Oil Tight Hood Net to net. 57 Flexible Coupling. Net to net. 58 Flywheel Mounted Alternator. Net to net. 59 Starter Motor. Net to net. 60 Cylinder. Net to net. 61 Cylinder Head. Net to net. 62 Piston Assembly. Net to net. 63 Fuel Injection Eqpt. Net to net. 64 Flywheel. Net to net. 65 Feed Pump Net to net. C1744 Hydraulic Jacking Beam Model SJ 15 1 No. (110 Kgs) 1 Non-Alloy steel Plate/Flat 51 Kg. 2 G.P. Non Alloy Steel Sheet. 5 Kg. 3 Non Alloy Steel Bars/Rods. 14.8Kg. C339

340 C1745 C1746 C1747 C1748 C1749 Hermetically sealed compressors for airconditioner using R 22 refrigerant gas of different capacities Deleted Deleted Deleted Table, Kitchen & other house hold articles made of aluminium including anodized with or without handle irrespective of what material handle are made of rectangular/square with straight edges. 4 Non Alloy Steel Tube. 40.6Kg. 5 Bearing FAG ZR. 8 Nos. 6 Screw/Nut/Bolt/Washer 1.9Kg. 7 Springs. 11Nos. 8 Mechanical Seals. 12 Nos. 9 Hose Assembly with end fittings. 1 No. 10 PVC/Rubber Grips & Pads. 9 Nos. 1 No. 1 Components Net to net basis except upper and lower housing 2 a) CRNGO Steel upto 3500 Kcal/hr Kg/Kcal b) More than 3500 Kcal/hr Kg/Kcal 3 a) Copper Wire upto 3500 Kcal/hr Kg/Kcal b) More than 3500 Kcal/hr Kg/Kcal 4 a) Music Wire Upto 3500 Kcal/hr Kg/Kcal b) More than 3500 Kcal/hr Kg/Kcal 5 a) Refrigeration Oil Upto Kg/Kcal Kcal/hr b) More than 3500 Kcal/hr Kg/Kcal 6 HR non alloy steel sheet/coils 1.28 Kg/Kg content 7 EC grade aluminium ingot 1.08 Kg/Kg content 1 Kg. 1 Aluminium Scrap 1.10Kg/Kg content of Aluminium in export product. 2 Aluminium Ingot. 1.07Kg/Kg content of Aluminium in export product. 3 Aluminium Sheet/Coils. 1.05Kg/Kg content of Aluminium in export product. In case of anodized the purity of inputs allowed i.e. Ingot Sheet/Coils /Circles shall be 99.7% and above.for other shapes rafer C-22 C1750 Vaporizer made of Aluminium 1 Kg. 1 Aluminium Ingot. 1.05Kg. C1751 Tyre curing press of all sizes. 1 No. 1 Non-Alloy HR Plates. 1.10Kg/Kg contnet in. 2 Components required for the. C340 Net to net basis with accountability clause. (1) Specification/capacity & weight of capital goods along with number is to be indicated in the application. (2). Net weight of component & sub-assemblies to be imported to be procured indigeneously to be given in application. (3). Net weightof components & items to be manufactured from each raw material to be imorted is to be given in the application. (4). Weight of component & items to be manufactured from each indigenous material in is to be given in the application.

341 (5). Weight of component and the item given as per notes 2 to 4 should tally with net weight of capital goods to be exported. (6). Total weight of each raw material is to be calculated on the basis of net weight given as per note 3 above plus waste as permitted in the norms for the particular raw material C1752 C1753 C1754 C1755 C1756 Dry Cell R6 PVC/Paper Jacket 16.45gm/pc. Dry Cell R6 Metal Jacket 18.45gm/pc. Dry Cell R14 Metal Jacket 43gm/pc. Dry Cell R20 Metal Jacket 85gm/pc. Dry Cell R20 Metal Jacket 85.59gm/pc. 1 No. 1 Manganese Dioxide 3.92gms. (Electrolytic) 2 Acetylene Black. 0.66gms 3 Zinc (Battery Grade) gms. 4 Graphite Powder 0.002gms. 5 LDPE 0.395gms. 6 Tin Plate Electrolytic 0.50gms. 1 No. 1 Manganese Dioxide 4.55gms. (Electrolytic) 2 Acetylene Black gms. 3 Zinc (Battery Grade) gms. 4 Graphite Powder gms. 5 LDPE gms. 6 Tin Plate Electrolytic. For Bottom 0.5gm PMS 5.0 gms. 7 Mercurry Fre Separator 18Sq.CMS. 1 No. 1 Manganese Dioxide 2.60gms. (Electrolytic) 2 Acetylene Black gms. 3 Zinc (Battery Grade) gms. 4 Graphite Powder gms. 5 LDPE gms. 6 Tin Plate Electrolytic For Top 0.875gms for Bottom 0.875gms PMS 7.053gms. 7 Natural Manganese Ore 4.146gms. (Powder) 1 No. 1 Manganese Dioxide 7.31gms. (Electrolytic) 2 Acetylene Black. 2.92gms. 3 Zinc (Battery Grade) gms. 4 Graphite Powder 0.004gms. 5 LDPE 1.26gms. 6 Tin Plate Electrolytic. For Top 1.46 gms for Bottom 1.57 gms PMS gms. 7 Natural Manganese Ore 16.44gms. (Powder). 1 No. 1 Manganese Dioxide 7.31gms. (Electrolytic) 2 Acetylene Black. 2.92gms. 3 Zinc (Battery Grade) gms. 4 Graphite Powder gms. 5 LDPE 1.26gms. 6 Tin Plate Electrolytic For Top 1.46 gms C341

342 C1757 Dry Cell Batteries (Paper Polyester Jacket) Type D (R20) 7 Natural Manganese Ore (Powder). 1 No. 1 Zinc Ingot/ Slab (Battery Grade) Relevant Zinc Alloy For Bottom 1.57 gms PMS 11.62gms 16.44gms kg/kg content in kg/kg content in 2 Acetylene Black 1.02 kg/ kg content in. 3 E. Manganese Dioxide 1.02 kg/ kg content in. 4 Metal Top Cover 1.01 No./No. 5 Metal Bottom Cover 1.01 No./No. 6 Manganese Ore 1.02 kg/ kg content in. 7 PVC Heat Shrink Tube of relevant Dia 1.02 Mtr./ Mtr. Content in the export product. 8 Kraft Paper for Tube 1.05 kg/ kg content in. 9 LDPE Granuules 1.05 kg/ kg content in. 10 Polyester Labels in Rolls 1.02 Sq.Mtr./ Sq.Mtr. Content in the export product. 11 Nickel Plated Brass Caps 1.02 No./No. 12 Cartons As per packing Policy. 13 Containers As per packing Policy. 14 Misc. items: Ammonium Chloride, Rice Starch, Corn Starch Lubricant (G.K.L) Graphite Powder CIF value limited to 2% of FOB value. 15 Zinc Oxide kg/kg content in Note : If the application is for Electrolytic Tin Plate in wide Coils in place of Metal Top Cover (import item No. 4) or Metal Bottom Cover (import item No. 5) it may be allowed as 1.16 kg/kg content in export product in lieu thereof C1758 CNC/AMS Vertical Machining Centre with APC 1 No. 1 Ball Screw 3 Nos. 2 Super precision Bearing. 4 Nos. 3 SIMO Drive with Motor 1 Set CNC System 4 SI Top Power Supply. 1 No. 5 Smart Flux Coupling. 4 Nos. 6 Encoder 1No. 7 Switches 4Nos. 8 LM Guides. 1 No. 9 Disc. Spring. 1 No. Import of component shall be allowed on net to net basis with accountability clause. C342

343 C1759 C1760 C1761 C1762 C1763 C1764 Shifted to Chemical Group Power Take-offs/Clutches CRCA Circles of Steel. Agricultural Sprinklers mainly made of Brass Coils for Quarts Analogue Wrist Watch of Caliber 2030/2035. Polyamide-Imide Enamel Overcoated Enamelled Copper Wire 1 No. 1 Bearing Taper Roller TPR Nos. 2 Bearing Ball SR DP Groove 6206ZZ. 3 Non-Asbestos Friction Plate 5878 C343 1 No. 1No. 4 Floating Plate. 1 No. 5 Housing. 1 No. 6 Sliding Sleeve 1No. 7 HB Plate 1No. 8 Bearing Retainer 1No. 9 Hand Lever. 1No. 10 Operating Yoke. 1No. 11 Adj. Yoke. 1No. 12 Driving Ring. 1No. 13 Toggle Lever. 4 Nos. 14 Operating Shaft. 1No. 15 Clutch Shaft. 1No. 16 Hub Retainer 1No. 17 Fitting No. 18 Fitting No. 19 Lock BRG Retainer 1No. 20 Lever Link 8 Nos. 1 MT. 1 Hot Rolled Non-Alloy Steel Strips/Wide Coils 1.30MT. 2 Cold Rolling Mill Rolls. 1.45Kg. 3 Rolling Oil 0.40Kg. 4 Pickling Oil 0.526Kg. 5 Steel Strapping As per packing policy. 6 VCI/Rusto Paper. As per packing policy. 1 No. 1 Brass Scrap. 1.07Kg/Kg content of the Brass in the Nos. (Weight -235 gms). 1 Horological Steel Strip Cold rolled 210 gms 2 Enamelled magnet copper wire 158 gms 3 Printed Circuit Board (un 1000 Nos. populated) 100 Kgs 1 Copper Wire Rod/Cathodes 97.9 Kgs. 2 Polyamide-Imide Enamel 11 kgs. containing Solid content of 35% to 40%. C1765 Dacrotised or other 1 Kg. 1 Cold Heading quality steel wire rod/wires/bars 1.128Kg.

344 C1766 C1767 C1768 C1769 equivalent surface coated high tensile precision fastners Cold/Hot Forged Bolts/Screws All varieties. Dacrotised or other equivalent surface coated high tensile precision fastners Cold/Hot Forged Nuts All varieties. Disc Springs made of Cold Rolled (Annealed/unannealed) Non Alloy/Alloy Steel. Tips for ball pen Rifills Stick Mixer (with plastic body) 2 Dacromet or other similar mateials used for surface coating. 3 Miscellaneous items: Thread Rolling Dies/Knurling Dies(Flat Cylinderical), Forming/Cutting Tools and Tools and Alloy Steel. 1 Kg. 1 Cold heading quality Steel wire rod/wires/bars. 2 Dacromet or other similar materials used for surface coating. 3 Miscellaneous items: Taps/Tapnibs Forming/Cutting Tools and Tools and Alloy Steel. 1 Kg. 1 Relevant Grade of Cold Rolled Steel Strips/Wide Coils C Kg. Upto 5% of the FOB Value. 1.20Kg Kg. Upto 5% of the FOB value. 1.7 kg Ten lakhs Nos (182 kg). 1 Brass Scrap kg 2 Stainless Steel Balls 2.04 kg ( Nos). 1 No. 3 Sintered Bronze Bush 1 No. 1 Motor 1 No. 2 Switch 1 No. Note: Only relevant item corresponding to will be allowed for import. C1770 Tube Forming Rolls 1 kg 1 Alloy Tool Steel Round Bar Conforming to AISI D-3/D-2 or equivalent C1771 Shock Absorber/ Strut 1 No. 1 Multilip / MI/ Hat/Seal/ Road (Hydraulic/ Gas) Seal C1772 C1773 Earth Moving Wheel Components, namely, Bead Seat Ring, Gutter Band Fixed Flange & Lock Ring Earth Moving Wheel Components, namely, Detachable Flange/ Loose Flange Centre Band Disc & Side Ring 1.70 kg/kg weight of Steel in export product 1 No. 2 Mounting Rubber 1 No. 3 Base Valve Body / Foot valve 1 No. Body/ Cylinder ends 4 Plunger Rod 1 No. 5 DU Bush 1 No. 6 Bump Stop 1 No. 7 Steel Strip 22 gms 8 Polyester Elastomer Hytrel 2 gms 9 Iron Powder 110 gms 10 Fluorescent Additive Oil 1.59 ml. 1 No. 1 HR Section (Rolled Bar) 1.10 kg/kg content in. 1 No. 1 HR Plate 1.20 kg/kg content in C1774 Disc Holder/ Guide made 1 kg 1 Copper Cathode and alloying 1.20 kg/kg content in

345 C1775 C1776 C1777 C1778 of copper, nickel and tin alloy (ASTM C-97800) Spacer Thrust made of 30%Glass filled Phenolic Moulding Powder Injector (Nozzle holder) with Nozzle for diesel Engine Suction Valve for Compressor Discharge Valve for Compressor C345 elements nickel and tin 1 kgs 1 30% Glass Filled Phenolic Moulding Powder 700 kgs (1000 Nos.) 1 Alloy Steel Bars / Coils to Specification AISI M kgs 16 kgs 2 Free Cutting Steel Leaded/Non- 204 kgs Leaded Bars/Coils to Specification EN1A/SEA 1010/EN8M 3 Spring Steel / Wire in Coil 14.3 kgs 4 Alloy Steel Bars/ Coils Type 105 kgs 18Cr N18/SEA 3415/16Mn Cr5 5 Spring Dowel Pins Net to net 1) MISC.ITEMS Grinding Wheels/Micro Drills/ Letter / Number Inscription Punches/ Lopping compound (Paste /Powder) Upto 3% of FOB value 1 No. 1 Valve Plate 1 Net to net 2 Spring Plates/Springs 16 (Net to net) 3 Buffer Plate/ Damping Plate/ 2 (Net to net) Synchronising Plate 4 JL. Nut (with or without washer) 5 (Net to net) Hexagon Nut/ Castle Nut/ Split Pin 5 Locating Pin/ Parallel Pin 8 (Net to net) 6 Lift Washer / Guide Ring 5 (Net to net) 7 Countersunk Bolt/ Centre Stud 1 (Net to net) 8 Seat 1 (Net to net) 9 Guard 1 (Net to net) 10 Locking Device 1 (net to net) 11 Unloader 1 (Net to net) 12 Guide Bush 2 (Net to net) 13 Actuator 1 (Net to net) 14 Washer 2 (Net to net) 1 No. 1 Valve Plate 1 (Net to net) 2 Spring Plates/Springs 12 (Net to net) 3 Buffer Plate/ Damping Plate/ 2 Net to net Cusion Plate/ Synchronising Plate 4 JL. Nut (with or without washer) 2 Net to net Hexagon Nut/ Castle Nut/ Split Pin 5 Locating Pin/ Parallel Pin 6 Net to net 6 Lift Washer/ Guide Ring 5 Net to net 7 Countersunk Bolt/ Centre Stud 1 (Net to net) 8 Seat 1 (Net to net)

346 9 Guard 1 (Net to net) 10 Locking Device 1 (Net to net) 11 Washer 2 (Net to net) C1779 C1780 C1781 C1782 C1783 C1784 Wheel Chair Components made out of Aluminium Extrusions frames/ cross bar / arm rest/ leg rest Magnet Retrieving Magnetic Tray Bi-Metallic Dial thermometer/ Mercury in Dial thermometer CNC Lathe Pest Repellent Model POBD kg 1 Aluminium Extruded Tubes/ 1 kg Sections of relevant Size 2 Aluminium Alloy Wire 0.02 kg 1 No. 1 Permanent Magnet Strontium Ferrite Grade in relevant demagnetized condition as component in relevant dimensions Permanent Magnet Strontium Ferrite Grade in demagnetized condition as Raw material 1 No. 1 Permanent Magnet Strontium Ferrite Grade in demagnetized condition as component in relevant dimensions Permanent Magnet Strontium Ferrite Grade in demagnetized condition as Raw material C346 Net to net kg/ kg content of Magnet in the export product. Net to net 1.02 kg/kg content of Magnet in the export product. 1 No. 1 Nickel Iron Alloy Bi-Metal Strip 1.02 kg/kg content in 2 Seamless Capillary Steel Tube OD 2 mm 3 SPDT Microswitch Net to net 1.02 kg/kg content in 4 Mercurry 1 gm /gm content in 1 No. 1 Ball Screws 2 Nos. 2 Power Operated Chuck 1 No. 3 Power chucking cylinder 1 No. 4 Stabilised Power supply 1 No. 5 Bearings with SKF or equivalent Net to net No. 6 Couplings 2 Nos. 7 Numerical Control System 1 No. 8 Encoders 2 Nos. 9 Connector 2 Nos. 10 Push Button Actuator 13 Nos. 11 Elements 13 Nos. 12 Safety Interlock 1 No. 13 Motor Protection Starter 10 Nos. 1 No. 1 Relevant Capacitor Net to net 2 Relevant Varistor Net to net 3 Relevant Triac Net to net 4 Relevant Resistors Net to net 5 Zinner 1 No. (Net to net)

347 C1785 C1786 C1787 C1788 Ferro Boron Cored Wire Steel Rolls for Cold Rolling Mill (2-Hi, 4-Hi, 6-Hi) Absorption Chillers of Various types (weight tobe indicated) Electric Generator and sub-assemblies thereof 1 kg (content of both inputs to be declared) 6 Light Connector 1 No. (Net to net) 7 EL Display 1 No. (Net to net) 8 Polycarbonate Compound 1.05 kg/kg content in 9 Copper Wire (Super Enamelled) 0.17 kg/kg content in 10 Copper Clad Laminates 1.01 kg/kg content in 11 Imaging/ Photo Printing Dry Film Photo resists 12 Solder Mask Ink-cum-Catalyst/ Hardner 13 Relevant Microchip 1 No kg/kg content in 1.05 kg/kg content in 1 Ferro Boron Powder 1.05 kg/kg content of Ferro Boron in the 2 CRCA Steel Strips 1.01 kg/kg content of Steel in the export product 1 kg 1 Alloy Tools Steel Round Bar 1.40 kg conforming to AISI D3/D2 1 No. 1 Lithium Bromide Net to net basis (for use as first charge) 2 BQ Plate 1.10 kg/kg content in 3 Copper Tube of relevant size Net to net basis 4 Cupro-nickel tube of Relevant Net to net basis size 5 Stainless Steel tube of relevant Net to net basis grade and relevant size 6 Absorbent Pump Net to net basis 7 Welding consumable and cladding strip Cif value restricted to 0.1% of FOB value 8 ICAM Systems Net to net basis 9 Refrigerant Pump Net to net basis 10 Burner 1 No. 11 Purge Pump 1 No. 12 Sight Glass Net to net. 13 Sight Glass packing Net to net. 14 Plug Net to net. 15 Relay Net to net. 16 Relay Base Net to net. 17 Thermostate 1 No. 18 Flow Switch 1 No. 1 No. 1 Copper Wire/Rod 1.01 kg/kg content in 2 Copper Flat/Strip/Bar 1.05 kg/kg content in C347

348 C1789 C1790 C1791 C1792 Vertical and/or Horizontal Pressure Leaf Filter with Accessories Copper Lug (Battery cable lug) Bueno Toner cartridge for photo copier Carburetor Assembly 3 Copper Plate 1.10 kg/kg content in 4 CRNGO Steel Sheet for Rotor 1.30 kg/kg content in 5 Insulation material (cut to length) 1.03 Sq.Mtr./Sq.Mtr. Content in the export product 6 Insulation material (in pieces) Net to net basis with accountability clause 7 Non Alloy Steel Plate of relevant grade 8 Misc. Items: Hose Pipe, Hardware, Lubrication Oil, Soldering Rod, Soldering Foils, sealant, varnish & cleaning agent, resin & Hardner 1.2 kg/kg content in CIF value of all these items taken together restricted to 2% of the FOB value 1 Unit 1 Woven wire cloth in SS 316L 1.05 Sq.Mtr./Sq.Mtr content in the export product 2 Linear Acting Pneumatic Piston vibrator 1 No. on net to net basis 1 No. 1 Copper Scrap 1.10 kg/kg content in 100 kg toner content in toner cartridge P Viscol 2.95 kg 2 PE 130 Wax 1.18 kg 3 Bayoxide kg 4 PSB2700 Resin kg 5 Bontron P kg 6 Aerosil 0.45 kg 1 No. 1 Screws Net to net 2 Needle Jet 1 No. 3 Inlet Nipple 1 4 Nipple Net to net 5 Float Assembly 1 6 Jet Needle 1 7 Caps 1 8 Pilot Air Jets Net to net 9 Diaphragm Assembly 1 10 Spring Clip 1 11 Needle Assembly 1 12 Pipe Net to net 13 Plug 1 14 Pilot Jet 1 15 Clip Net to net 16 Rings Net to net C348

349 C1793 Aluminium Moulds for Plastic Products C1794 Enamelled copper wire with self bonding enamel of less than 0.1 mm diameter (not elsewhere specified) C Fibre Single / Multimode Optical Fibre Armoured Cable Outer Dia mm or above, 165 kg/km or above consisting of Minimum 3 PBT tubes of 2.8 mm OD or above C Fibre Single / Multimode Optical Fibre Armoured Cable Outer Dia mm or above, 165 kg/km or above consisting of Minimum 3 PBT Tubes of 2.8 mm OD or Above C Fibre Single / Multimode Optical Fibre Armoured Cable Outer Dia mm or above, 165 kg/km or above consisting of Minimum 3 17 Plate 1 18 Locating Pin Net to net 19 Washer Net to net 20 Adjuster 1 1 No. 1 Aluminium Blocks 1.05 kg/kg content of 1 kg 1 Copper Rod/ Copper wire dia 0.1 mm and above 2 Self Bonding enamel having solid content of 10% 1 km 1 Single Mode/ Multimode Optical 4.2 km Fibre 2 UV Curable Colouring Ink 0.03 kg 3 Polybutylene Terphthalate (PBT) 4.20 kg 4 PBT Master Batch 0.11 kg 5 Thixotropic Filling compound 1.89 kg 6 Thixotropic Flooding Compound 7.57 kg 7 HDPE (for Armoured Cable) kg 8 Steel Tape kg 9 FRP 1.05 km C kg/kg content in CIF value restricted upto 8% of the FOB value 10 Water Blocking Tape Sq.mtr. 11 Hot Foil Stamping Tape 1.05 km 12 Armid Yarn 2.6 kg 13 Armid Rip Cord 1.08 kg 1 km 1 Single Mode / Multimode Optical Fibre 12.6 km 2 UV Curable Colouring Ink 0.10 kg 3 Polybutylene Terphthalate (PBT) 7.04 kg 4 PBT Master Batch 0.17 kg 5 Thixotropic Filling compound 2.84 kg 6 Thixotropic Flooding Compound 7.57 kg 7 HDPE (for Armoured Cable) kg 8 Steel Tape kg 9 FRP 1.05 km 10 Water Blocking Tape Sq.mtr. 11 Hot Foil Stamping Tape 1.05 km 12 Armid Yarn 2.6 kg 13 Armid Rip Cord 1.08 kg 1 km 1 Single Mode / Multimode 6.30 km Optical Fibre 2 UV Curable Colouring Ink 0.04 kg 3 Polybutylene Terphthalate (PBT) 7.04 kg 4 PBT Master Batch 0.17 kg 5 Thixotropic Filling compound 2.84 kg

350 C1798 PBT Tubes of 2.8 mm OD or Above (1) Compact Disk - Audio (2) Compact Disk - Vedio (3) Compact Disk - ROM 6 Thixotropic Flooding Compound 7.57 kg 7 HDPE (for Armoured Cable) kg 8 Steel Tape kg 9 FRP 1.05 km 10 Water Blocking Tape Sq.mtr 11 Hot Foil Stamping Tape 1.05 km 12 Armid Yarn 2.6 kg 13 Armid Rip Cord 1.08 kg Nos. A. RAW MATERIAL F CD 1 Polycarbonate 173 kg 2 Aluminium Target - 20 mm x 0.1 No. 160 mm dia 3 Gold Target - 20 mm x 160 mm 0.1 No. dia B. CONSUMABLES USED IN THE MANUFACTURE OF CDS 1 Stamper or Mother Master 1 No. 2 Mold Mirror 0.02 pair 3 Graphite Foil 0.1 Nos. 4 Digital Audio Tap-C60/90 6 Nos. 5 Magnetic Tape-2394 ft. 6 Nos. 6 Recording Head 0.25 Nos. 7 Silver Nitrate 0.2 kg 8 Nitto Tape 1 meter 9 Hand Gloves 4 Pairs 10 Laser Beam Head Nos. 11 Filters 0.01 Nos. C. PRINTING RAW MATERIALS: 1 Printing Ink 1.6 kg 2 Laquer 1 kg 3 Process Base 2 Litre 4 Metallic Clear 2 Litre 5 Polyglaze White Ink litre 6 Image Ink 0.01 litre 7 Master Colour for fancy CD & 1 kg Playstation 8 Mixing Clear (Paint) 2 litre 9 Screen/ Component for Screen 40 Nos. making 10 Screen Mesh Sq.meter 11 Mask kg 12 Screen coating solution 0.02 kg 13 Screen Adhesive 0.02 kg C350

351 C1799 Filter Cartridge: Cylindrical Air Intake Filter/ Pulse Jet Air Filter/ Conical Filter Cartridge/ Cylindrical 14 Screen Stiffner 16 Nos. 15 Screen Stickers 16 Nos. 16 Squeegee 40 Nos. 17 Tray Velvet Sheet 10 Nos. 18 Graphic Art Film 8 Nos. 19 UV Lamp 0.1 Nos. 20 Bulbs for computerized camera like Papageno Bulb C351 D. CLEANING AND POLISHING MATERIALS: 0.1 Nos. 1 Linti Free Paper 200 Nos. 2 Tissue Paper 200 Nos. 3 Stamper Polishing Sheet 2 Nos. 4 Mirror Cleaning Solution 0.02 Litre 5 Anti Rust Solution 0.4 Litre E.STAMPER CLEANING AND POLISHING MATERIAL: 1 Isoproply Alcohol 4 Litre 2 Acetone 2 Litre 3 Univitol 4 Litre 4 Disodium Benzene 0.2 kg 5 Paladium Chloride 0.2 kg 6 Nickel Sulphamate Solution 2 kg 7 Nickel-Chloride Hexahydrate 0.02 kg 8 Nicket Carbonate 0.2 kg F. PACKING MATERIAL: 1 Jewel Box Digi pack/ CD Envelop 1) Polystyrene/ P.P. Moulding Powder 2 Tray Net to net 1.05 kg/kg content in Net to net 2 Polystyrene/ Moulding Powder 1.05 kg/kg content in 3 Inlay Card Net to net 3 Relevant Paper / Board 1.05 kg/kg 4 Self Sealing Pouch Net to net 5 BOPP Tape 2000 Meter 6 Tear Tape 4000 Meter 7 Adhesive Tape 10 Rolls 8 Splicing Tape 1 Meter 1 Number 1 Relevant Filter paper 1.02 kg/kg content in

352 C1800 Filter Cartridge Non-Aerosol Spray 1 Number 1 Relevant Module Sub-Assembly Net to net Pump/ dispensers 2 Relevant Actuator Assembly Net to net Note: The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part No. if any) etc. of the components sought for import should confirm to those utilise in the manufaturer of the resultant product. C1801 C1802 C1803 C1804 C1805 C1806 Dumet wire ( Copper tube filled with Alloy Steel and Nickel) Stainless Steel Ballpen Tips Sulphur Cored Wire Cryocontainer/ Cryoseal Container/ Liquid Nitrogen Container/A.I Equipment/ Cryogenic Container Cryoseal Liquid Nitrogen Container made of Aluminium High Speed Steel (Cobalt Grade ) End Mills Dia 1 mm to 20 mm Electrolytic Tinplate Waste/waste printed /lacquered unprinted sheets cut to size for making components of round tin cans other than OTS cans C1807 Long Life Lamps ( watts) life 16,000 hours to 20,000 hours) 1 kg 1 Nickel Cathodes and / or Nickel Pellets - containing approximate 99.9% (min) Nickel contents 2 High Conductivity Copper Tube containing approximate 99.9% (min.) Copper contents 1 Million Number 1 Stainless Steel Wire dia 2.3 mm of relevant grade C kg/kg content in 1.01 kg/kg content in 2.30 kg/kg content in 2 Tungsten Carbide Balls 1.02 Millions 3 Cutting Oil, Cleaning Oil- Trichloroethylene, Cutting Tools 1 kg 1 Sulphur Granules S:99% Min. Size : 0 to 2 mm 2 CRCA Steel Strips Grade: EDD Width 58 mm 1 Number 1 Cold Rold Aluminium Sheet in Coil & Non Coil Form 4% of FOB value kg/kg of Sulphur Granule content in export product 2 Pallodium Oxide Anhydrous Net to net 3 Molecular Sleve Net to net 4 Non Woven Cryogenic Insulation Fabric kg/kg of CRCA content in 1.10 kg/kg content in 1.05 kg/kg content in 5 Aluminium Foil 1.02 kg/kg content in 6 Adhesive - Crest 5% of FOB 7 Adhesive - Ciba 8 Consumable (Welding Wire, Welding Flux & Welding Rods) 9 FRP Neck Tubes Net to net 1 kg 1 High Speed Steel ( Cobalt Grade) in the form of Coils/ Bars/Rods of Diameter 7 mm to 23 mm 1 kg 1 Unprinted /Unlaquered Electrolytic Tinplate Waste/Waste Coil/Sheet 1000 Numbers 1.50 kg 1 kg 1 90% Krypton Gas Bal Nitrogen 116 Litres at 1 Bar or 0.58 Litre at 200 Bar 2 Glass Shells/ Glass Envelopes 1100 No. 3 Brass Caps 1010 Numbers 4 B 701 Halogen Tungsten Wire ( 910 Mtrs

353 C1808 C1809 Dish Ends (Ellipsoidal or Circular Shape) made of Non-Alloy Steel Plates Zinc Builders Hardware Lacquered/ Powder Coated (T/C Pressure Die Cast & Zinc Alloy conforming to Z-3/Z-5 specification) C353 upto 30 mg) 5 Lead in wire (Ballotiny filled) 1010 Numbers 6 Getter (P3L5) Litres 7 K 18 Lamp Copping Cement 1.55 kg 8 Getter (ALZR) Litres 9 Marking Ink Grams 1 kg 1 Non-Alloy Steel Plates SA 516/515 1 MT 1 Zinc Ingot Relevant Zinc Alloy 1.1 kg/kg content of Steel Plate in the 2 Cylinders with or without key (s) Net to net 3 Plastic Chips for plastic component such as washers key holders etc. Polyamite 66/ Nylon 66/ Polyamide 6/ Nylon 6/ Polyacetal/ Delrin/ Polyoxymethylene 4 Machine Screws Net to net 5 (a)berlaclear CT Laquer Albrilac HB (for Electrophoretic Lacquer)/ Polyester Powder for coating (b) Solvent for Electrophoretic Lacquer (c) Rinse additive for Electrophoretic Lacquer 6 Abrasive Belt 50 mm X 3500 mm for grinding 7 Abrasive Belt 150 mm X 2000 mm for grinding 8 Liquid polishing compound for polishing Rough Finish 9 Trichloro Ethylene for degreasing 10 Bar Polishing compound Final Finish (Pre-polishing compound, polishing compound Finshing compound) 11 Polishing Buffs (Pre polishing Buffs, Polishing Buffs, Finishing Buffs) 12 Plastic Vibratory Media 1.12 kg/kg content of Zinc in export product 1.10 kg/kg content in 1.05 kg/kg content in CIF value limited to 4% of FOB of export. Note: 1. CIF value for import item Nos. 6 to 12 shall be limited to 4% of FOB value of export. C No. ( Cold Rolled Bright Finish gms. gms.) Surgical Stainless Steel Strips Scalpel (Surgical Blade with Plastic handle & cover) 2 Polypropylene/ High Impact Polystyrene (HIPS)/ Acrylonitril Butadiene Styrene (ABS) 7.35 gms. 3 Medical Paper As per packing Policy. C1811 Harrow Disc Notched 1 kg 1 Alloy/ Non Alloy Steel Billets 1.45 kg

354 C1812 C1813 C1814 C1815 C1816 C1817 C1818 Lacquered Tin Free Steel Sheet S.S. Perforated Apron for Tea Industry Embossed Sheets of Cold Rolled Non-Alloy Steel Wax Impregnated Carbon Electrodes for Dry Cell Battery Lead Cored Wire from Lead Ingots Aluminium Steam Sterilizer - Double Racks (pressure cooker type) Polyesterimide Enameled copper wire/ strip C1819 CNC Bushing C-1-1/2 Type C1820 Tapping Chucks WF 1 IKP C1821 Adapter Housing WEN 120 B.60 C1822 Two Cubic Meter Standard bucket Wheel loader C1823 Hydraulic Excavator 1 kg 1 Tin Free Steel Sheet (Unlacquered) 1 kg 1 C.R. Stainless Steel Sheets/ Wide Coils (AISI 304) kg 1.10 kg 1 kg 1 C.R. Non Alloy Steel Sheets/ 1.02 kg Wide Coil Bright finish of relevant grade 1 kg 1 Low Ash Metallurgical Coke 260 gms. (Inclusive of 5% wastage) 2 Amorphous Graphite 395 gms. (Inclusive of 5% wastage). 3 Pure White Paraffin Wax (Melting point Degree C) 105 gms. (Inclusive of 5% wastage). 4 Coal Tar Pitch (V.M. 50%) 400 gms. (Inclusive of 50% wastage). 5 Natural Crystalline Graphite 85 gms. (Inclusive of 5% wastage). 1 kg 1 Lead Ingots 1.02 kg/ kg content in. 2 CRCA Steel Strip 1.01 kg/ kg content in. 1 No. 1 Aluminium Circles, Commercial Grade 1.03 kg/ kg content in. 1 kg 1 Copper Wire Rod/ Cathode 1.01 kg/ kg content in. 2 Polyesterimide Enamels 1.01 kg/ kg content in. 1 No. 1 Alloy Steel Round/ Bars 2 kg/ kg content in. 1 No. 1 Alloy Steel Round/ Bars 2.82 kg/ kg content in. 1 No. 1 Alloy Steel Round/ Bars 3.06 kg/ kg content in. 1 No. 1 Reversing Transmission 1 No. 2 Control Valve (Hydraulic Valve) 1 No. 3 T.R. Bearing 1 No. 4 Digital Hourmeter 1 No. 5 Front Drive Rigid Axle 1 No. 6 Rear Drive Rigid Axle 1 No. 1 No. 1 Control Valve 1 No. 2 Swing Bearing 1 No. 3 Pilot Valve 3 Nos. 4 FC Valve 1 No. 5 Seal Group 2 Nos. 6 Pump 1 No. 7 TR Chain 2 Nos. 8 Other Relevant Component As per GN4. 9 Liquid adhesive The quantity of import item No. 9 to C354

355 10 Calking 11 Sealant C may be allowed within 1% of FOB value. 12 Welding Wire 2% of the weight of Steel to be welded. 13 Steel Tube 1 Mtr./Mtr. content in. 14 CDS Tube 1 Mtr./Mtr. content in. 15 Hose 1 Mtr./Mtr. content in. 16 Steel Plate of relevant grade 1.1 kg/kg content in. Note: 1. The quantity of import item Nos. 9 to 11 may be allowed within 1% of FOB value. C1824 Lead Cored Wire 1 kg 1 Lead Ingots 1.02 kg/kg content in 2 CRCA Steel Strips 1.01 kg/kg content in C1825 C1826 C1827 Frame Assembly (Exhaust frame for Steam Turbine Generator) LPG Storage Bullets/ Tanks Kerosene Wick Stove and its parts 1 No. ( 34.4 MT) 1 Non Alloy Steel Plates 1.20 kg/kg content in 2 Relevant Steel Forgings/ Net to net Components Flanges, Rings, Segmental Rings, Bars 3 Stainless Steel Sheets/ Plates 1.05 kg/kg content in 4 Relevant Castings Net to net 5 Relevant Net to net Studs/Nuts/Bolts/Screws /Pins/ Dowels Adapters/Connectors/Washer Springs 6 Gaskets Net to net 7 Wire Inserts Net to net 8 Insulation Material 1.02 Sq.Mtr./Sq.Mtr. Content in the export product 9 Insulation Paper 1.02 Sq.Mtr./Sq.Mtr. Content in the export product 10 Welding Electrodes/ Wires (In Straight Lengths/Coils/Spools) 2% of net weight of Steel to be welded 11 Welding Flux 0.5% of net weight of Steel to be welded 1 No. 1 B.Q. Plates 1.05 kg/ kg content in. 1 No. 1 CRCA Non Alloy Steel Sheet 1.10 kg/kg content in. 2 Nickel Anode 0.97% of the weight of components to be nickel plated. 3 Paper Board for corrugated boxes As per packing Policy. C1828 Radiators for 1 No. 1 Stainless Steel Sheet/ Coils 1.05 kg/ kg content in

356 transformer made of stainless steel 2 Welding Wires / Rods, Seam Welding Electrodes / Wheels C356. 1% of weight of Steel to be welded 3 Absorb Bag Net to net as per packing policy Note: In the case of coated/ painted radiator, whether internally or externally coated, relevant coating/ painting material may be allowed on actual requirment basis upto 4% of the FOB value of exports. C1829 C1830 C1831 C1832 Aircooler with/without Trolley Hot Rolled Non-alloy Steel Strips/ Slit Coils in pickled and oiled condition Aluminium Pressure Cooker Chrome/ Nickle Plated Wire Wheel for all types of cars 1 No. 1 ABS/HIPS 1.05 kg/ kg content in. 2 PVC Compound 1.05 kg/ kg content in. 3 Nitrile Rubber compound 1.05 kg/ kg content in. 4 Relevant Gear Motor/ Swing 1 No. Motor 5 Relevant Main Motor 1 No. 6 Relevant Pump Motor Net to net. 7 Expanded Polystyrene 1.05 kg/kg content in 8 Cellulose impregnated corrugated paper cartons 1 kg/ kg content in. 9 Polypropylene 1.05 kg/ kg content in. 10 Relevant Capacitor 1 No. 11 Relevant Switches 2 Nos. 12 Kraft Paper As per packing policy. 13 Kraft Paper/EPS 1.05 kgs/kg content in 14 HIPS 1.05 kgs/kg content in 15 Polycarbonate 1.05 kgs/kg content in 1 kg 1 Hot Rolled Non-alloy Steel Wide 1.02 kg Coils in un-pickled and un-oiled condition 1 No. 1 Aluminium Alloy Circles (commercial grade) 1.03 kg/ kg content in. 1 No. 1 HR Sheet/Wide Coil for RIM 1.19 kg/ kg in the. 2 Billets for shell 2.5 kg/ kg in the. 3 Wire for spokes 1.07 kg/ kg in the. 4 Nipple Wire 1.42 kg/ kg in the. 5 Nickel 0.30 kg/per No. of. 6 Sealant 0.30 kg/per No. of. 7 Brightener 0.15 kg/ No. of. 8 Plating Chemicals CIF value limited

357 C1833 C1834 C1835 C1836 C1837 C1838 Deleted Telephone Cable of relevant size (pairs) having copper conductor - 0.5mm dia Telephone Cable of relevant size (pairs) having copper conductor mm dia Telephone Cable of relevant size (pairs) having copper conductor mm dia D.C. Motors Master Cylinder Assy. 1 km As per Engineering Table No. 9(1) 1 Km As per Engineering Table No. 9(2) 1 Km As per Engineering Table No. 9(3) 1 No. 1 Relevant Cold Rolled Steel Sheet/ Strip/ Wide Coil 2 CRNGO Steel Sheet/ Strip/ Wide Coil 3 Trivolthrem/ Triflixel (Nomex/ Polyester Film/ Nomex) upto 3% of the FOB value kg/ kg content in kg/ kg content in. 1 kg/ kg content in. 4 Copper Wire (Square) Bar/ Rod 1.05 kg/ kg content in. 5 M.S. Plate 1.05 kg/ kg content in. 6 Forging Net to net. 7 Brass Brush Holder Net to net. 8 Nomex Aramid Paper Net to net. 9 Bearings of relevant Type Net to net. 10 Resigiss Banding Tape Net to net. 11 Name Plates Net to net. 1 No. 1 Aluminium Alloy Ingot 1.12 kg/ kg content of Aluminium Alloy in. 2 Circlip Net to net. 3 Seal Net to net. 4 'O' Ring Net to net. 5 Plug Protective Net to net. 6 Plug Protective Net to net. 7 Plunger Primary Net to net. 8 Seal Net to net. 9 Pin Net to net. 10 Poppet Net to net. 11 Seal Net to net. 12 Secondary Plunger Net to net. 13 Sleeve Net to net. 14 Spring Net to net. 15 Seal Net to net. C357

358 C1839 C1840 C1841 C1842 C1843 C1844 C1845 C1846 C1847 Steel Trunks (in CKD and SKD condition), with accessories/ fittings/ hardwares, such as, hasps, staples, corners, handles, slips, knobs fittings side flaps and flats Marsh Geophone Strings consisting of 12 SM-24 Basic Elements Marsh Geophone Strings consisting of 12 SM-4 Basic Elements (LD) Copper Bonded/ Coated Ground Steel Rods HRC Fuses Chafing Dishes/ Chafers (Round Shaped) Chafing Dishes/ Chafers (Rectangular Shaped) Waste Coupling for Sink S.S. Vaccum Jugs (without Handle & Lid) for Coffee/ Tea machines 16 Spring Net to net. 17 Retainer Net to net. 1 kg 1 Carbon Steel/ Mild Steel/ all seconds grades/ deffectives/ cuttings/ prime sheets/ coils/ strips 1.25 kg/ kg content in. 1 Tin Plate waste/ waste 1.25 kg/ kg content in. 2 Bronze Powder kg/ kg of. 3 Suitcase locks, metal fittings including combination locks 1 No. 1 Basic Element SM Nos. 1 No. 1 Basic Element SM-4 12 Nos. 1 kg 1 Non-Alloy Steel Rounds/ Bars/ Wire Rods 2 Copper Wire Bars/ Cathodes/ Rods Net to net with accountability in the kg/ kg content in kg/ kg content in. 1 No. 1 Brass Strip BS kg/ kg content in. 2 Copper Strip BS kg/ kg content in. 3 Silver Plated Copper Strip 1.02 kg/ kg content in. 4 Fire Sheet/ Disc Board 1.10 kg/ kg content in. 1 kg 1 S.S. Sheets/ Wide Coil of relevant Grade 1.24 kg/ kg content in. 2 Brass Scrap 1.06 kg/ kg content in. 1 kg 1 S.S. Sheets/ Wide Coil of relevant Grade 1.09 kg/ kg content in. 2 Brass Scrap 1.06 kg/ kg content in. 1 No. 1 S.S. Sheets of relevant Grade 1.36 kg/ kg content in. 2 Brass Scrap 1.05 kg/ kg content in. 3 P.P. Moulding Powder/ Granules 1.05 kg/ kg content in. 1 No. 1 S.S. Wide Coil of relevant Grade 1.36 kg/ kg content in. 2 Getter Pills 1 No. 3 Buffing Wheel As per consumable Policy. 4 Kraft Paper As per packing material Policy. C1848 Injection Mould with Hot 1 Set 1 Relevant Alloy Steel Flat/ Round/ Block 1.15 kg/ kg content in. C358

359 C1849 Runner System and 2 Hot Nozzle Flat Net to net (set) Temperature Controller 3 Temperature Control System Net to net (set) Vibratory Cutlery Polisher 1 No. 1 Relevant Motovib (Vibration Motor) 2 Relevant Variable Frequency Drive C359 Net to net. Net to net. 3 Relevant Energy Regulator Net to net. 4 Relevant UV Lamp Net to net. 5 Relevant UV Choke Net to net. 6 Relevant Noise Filter Net to net. 7 Relevant Gas Filled Lifting Cylinder Net to net. 8 Polyurethane Elastomer 1.05 kg/ kg content in. 9 Relevant Air Heater Net to net. C1850 Synthetic Media Pocket 1 No. 1 Synthetic Non-Woven Filter Media of relevant efficiency and GSM C1851 C1852 C1853 C1854 Electrical Terminals (Rail Mounted) Stainless Steel Inner/ Outer Ring for Gasket Tube-cut-of-Blades (knives) made of High Speed Steel Sheet Plate Processor for offset printing industry 1.04 Sq.Mtr./ Sq.Mtr. Content in the export product. 1 No. 1 Relevant Polymide Powder 1.05 kg/ kg content in. 1 kg 1 Stainless Steel Sheet/ Wide Coil/ Strips of relevant grades 1 kg 1 High Speed Steel Sheet of relevant grade 1.75 kg/ kg content in kg/ kg content in. 1 No. 1 A.C. Motors Net to net. 2 Gear Box Net to net. 3 Speed Controller Net to net. 4 Float Switch Net to net. 5 Ball Bearing Net to net. 6 Spiral Brushes Net to net. 7 Submersible Pump Net to net. 8 Blower Motor Net to net. 9 Photoelectric Switch Net to net. 10 Centrifugal Magnetic Pump Net to net. 11 Temperature Controller Net to net. 12 Visual Programmable Logic Net to net. Controller 13 Bellows Pump Net to net. 14 Magnetic Switch Net to net. 15 Noise Filter Net to net. 16 Solenoid Valve Net to net. 17 Heater for Dryer Net to net. 18 Cartridge Heater Net to net. 19 Relay Net to net. 20 Socket Net to net. 21 Main Switch Net to net.

360 C1855 C1856 C1857 C1858 C1859 C1860 C1861 C1862 C1863 C1864 Telephone Cable of relevant size (pairs) having copper conductor 0.398/ 0.4mm dia Telephone Cable of relevant size (pairs) having copper conductor 0.89/ 0.90mm dia Copper Sleeves (of High Conductivity 99.99% Pure Copper) as a component of Copper-T Ferro-Molybdenum Cored Wire Aluminium Redrawn Alloy Tube/ Pipes Transformer MS Tank/ Clamps Circles (Circular Blank/ Disc) made of CR Non- Alloy Steel Sheets/ Strips/ Wide Coils Automobile Radiator Parts made of Brass Graphite Cored Wire Automotive Head Lamps, Auxiliary Lamps, Work 22 Thermocouple & Mounting Screws Net to net. 23 Rollers Net to net. 24 Cable Net to net. 25 PUC Ball Valves Net to net. 26 Relevant Stainless Steel Sheet 1.05 kg/ kg content in. 1 Km As per Engineering Table No.9(4) 1 Km As per Engineering Table No.9(5) 1 Kg 1 Seamless Oxygen Free Copper Tube (of High Conductivity 99.99% Pure Copper) 1 kg 1 Ferro-Molybdenum Granule/ Powder 1.05 kg kg/ kg content in. 2 CRCA Steel Strip 1.01 kg/ kg content in. 1 kg 1 Aluminium Extruded Hollow 1.02 kg Alloy Tubes/ Pipes 1 kg 1 HR Non-Alloy Steel Sheet/ Wide kg Coil 2 Polyurethane Epoxy Paint Upto 4% of FOB value of export 3 Zinc Rich Epoxy Primer 1 kg 1 Relevant Cold Rolled (including 1.16 kg CRCA/ CRCA - Skin Passed/ Temper Passed) Non-alloy Steel Strips/ Wide Coils 2 VCI/ Rusto Paper As per Packing Policy. 3 Steel Strapping As per Packing Policy. 1 kg 1 Brass Sheet 1.05 kg/ kg content in. 2 Brass Pipe 1.01 kg/ kg content in. 3 Brass Rod 1.05 kg/ kg content in. 1 kg 1 Graphite Powder/ Granules kg/kg content of powder/ granules in. 2 CRCA Steel Strips 1.01 kg/kg content of CRCA Steel in the. 1 No. 1 Relevant CRCA Steel Sheets/ Wide Coils/ Strips Lamps, Rubber Body 2 Halogen/ Automotive Lamps (Bulbs) 1.10 kg/kg content in. Net to net. C360

361 C1865 Lamps for Motor Vehicles (with or without bulbs) Kapton 0.025mm x 20mm width x 500 Meters length per Roll (Polyamide film in cut length) C1866 Coblosam containing: 1. Rhodorsil Resin kg/ Sq.Mtr. 2. Phlogophite Mica kg/ Sq.Mtr. 3. Hiblon Film HH kg/ Sq.Mre. 4. Siccatif kg/ Sq.Mtr. C1867 Coblosam containing: 1. Rhodorsil Resin kg/ Sq.Mtr. 2. Phlogophite Mica kg/ Sq.Mtr. 3. Hiblon Film HH kg/ Sq.Mre. 4. Siccatif kg/ Sq.Mtr. C1868 Electric Storage Water Heater 3 Head Lamp Glass Lenses Net to net. 4 Bonding Adhesive/ Lacquer Thinner/ Epoxy Powder C361 4% of FOB value of exports. 5 Relevant Synthetic Rubber 1.10 kg/kg content in. 6 Relevant Plastic Powder/ Granules 1 Roll 1 Kaneka PI Film "APICAL" Film 25 AH 1030mm wideth x 0.025mm Thickness (Polyamide film in running length) 1 Sq. Meter 1 Rhodorsil Resin /- 5% Solid content 1.05 kg/kg content in kg/kg content in kg/ Sq.Mtr. Content in the export product. 2 Phlogophite Mica kg/ Sq.Mtr. Content in the export product. 3 Hiblon Film HH kg/ Sq.Mtr. Content in the export product. 4 Siccatif kg/ Sq.Mtr. Content in the export product. 1 Sq. Meter 1 Rhodorsil Resin /- 5% Solid content 0.05 kg/ Sq.Mtr. Content in the export product. 2 Phlogophite Mica kg/ Sq.Mtr. Content in the export product. 3 Hiblon Film HH kg/ Sq.Mtr. Content in the export product. 4 Siccatif kg/ Sq.Mtr. Content in the export product. 1 No. 1 Polypropylene Granules 1.05 kg/kg content in. 2 Heating Element 1 No. 3 Polyol Resin kg/ kg of PU Foam contained in. 4 Isocyanate Hardner kg/ kg of PU Foam contained in. 5 Thermostate 1 No. 6 Safety Valve 1 No. 7 M.S. Sheet/ Wide Coil/ Strips of relevant grade 1.05 kg/kg content in. 8 Nut & Bolt Net to net. 9 Copper Sheet 1.02 kg/kg content in the export prouct. 10 S.S. Sheet/ Wide Coil/ Strips of relevant grade C1869 Auto Control Cable for 1 kg 1 Galvanised Steel Wire of relevant dia 1.18 kg/kg content in the export prouct kg/kg content in.

362 C1870 C1871 C1872 C1873 seat applications Auto Control Cable ASM Hood Cable Deleted Empty Recessed Fluorescent fitting complete with Aluminium Louver Portable Electro Mechanical Power Tools 2 Zinc Alloy Ingot (Z-5) 1.05 kg/kg content in. 3 HDPE/ PP Granules 1 kg/kg content in the. 1 kg 1 Galvanised Steel wire of relevant dia 1.03 kg/kg content in. 1 No. 1 Relevant Aluminium Sheet 1.02 kg/kg content in. 1 No. Raw Materials: 1 CRNGO Steel Sheet/ Strip/ Wide Coil 1.90 kg/kg content in. 2 Copper Wire Rods 1 kg/kg content in the. 3 Nylon 1 kg/kg content in the. 4 Araldite 1% of FOB value of export. Components: 1 Commutator 1 No. 2 Switch 1 No. 3 Gear & Pinion 1 No. 4 Bearings Net to net. 5 Cable 1 No. 6 Chuck & Key 1 No. 7 Brush Holder 2 No. 8 Brush Spring 2 No. 9 Fixed Ratchet 1 No. 10 Moving Ratchet 1 No. 11 Inner Clamp Washer 1 No. 12 Outer Clamp Washer 1 No. Note : Components are to be accounted for in s. C1874 Diesel Fork Lift 1.5 Ton 1 No. 1 Relevant Engine - 3 to 6 Cylinder Net to net. to 10 Ton 2 Forks 800mm to 2500mm Net to net. (relevant) 3 Torque Converter Net to net. 4 Hydraulic valve 2/3/4 Spool Net to net. Valve 5 Relevant 1 Beam 4" to 6" Net to net. (2300mm to 2800mm) 6 C Channel 4" to 6" (2300mm to Net to net. 2800mm) 7 Selector disc (Inner + Outer) Net to net. 8 Bumper Bar/ Carriage Section Net to net. 9 Brake Assembly Net to net. 10 Lift Cylinders Net to net. C362

363 11 Tilt Cylinders Net to net. 12 Steering Cylinder Net to net. 13 Steering Unit Net to net. 14 Tyres - 6*10 to 9*20 Net to net. 15 Wheel Rims 6*10 to 9*20 Net to net. 16 Seat Net to net. 17 Bearing (Roller/ Taper) Net to net. C1875 C1876 C1877 C1878 C1879 C1880 Cast Article made of Zinc Alloy Roto Glydring made of Glass filled PTFE Tube Vacuum Cleaner Automotive Wheel (Diameters from 12"- 17") without tyres Deleted Welding accessories, such as, Electrode holder, chipping hammer, cable connector, earth clamp, ground clamp, cable ring, splicer hammer 18 Battery 12 V BOAH to 12V 120 AH Net to net. 19 Drive Axle Net to net. 20 Transmission Pump Net to net. 21 Hydraulic Pump Net to net. 22 M.S. Sheets/ Wide Coils/ Plates 1.05 kg/kg content in. 1 kg 1 Relevant Zinc Alloy Ingot 1.06 kg/kg 1 Foot 1 Cluster of PTFE with glass filled tube 1.6 Feet 1 No. 1 ABS 1.05 kg/kg content in. 2 Polypropylene 1.05 kg/kg content in. 3 Polycarbonate 1.05 kg/kg content in. 4 Motor Net to net. 5 Switches Net to net. 6 PP Spun Bag Net to net. 7 Main Cord Net to net. 8 Filter Motor protect Net to net. 9 Capacitor Net to net. 10 Packing material As per packing policy. 1 No. 1 HR Sheet/ Wide Coil of relevant Grade of Steel 1.18 kg/kg content of HR Sheet/wide coil of relevant grade of steel in the export prodcut. 1 No. 1 Brass Scrap kg/kg content in. 2 Synthetic Rubber 1.10 kg/kg content in. 3 Non Alloy Steel Wide Coils/ Steels 1.10 kg/kg content in. 4 Polypropylene - Plastic Resin 1.05 kg/kg content in. 5 Fiber Glass 1.05 kg/kg content in. 6 Nylon Resin 1.05 kg/kg content in. C363

364 Note: Description of the specific welding accessory shall be indicated by the exporter in the application. C Inkjet Cartridges 1 No. 1 Relevant Ink 1.17 ML per ML Ink content in the export product. 2 Cleaning Solution 60 ML C1882 C1883 C1884 C1885 Asbestos Moulded Metallic Brake Lining Asbestos Moulded Metallic Clutch Facing Seamless Steel Casing and Tubing Water Cooler 3 Unused Empty inject Electronic Net to net. Cartridge 4 Lid 1 Unit 5 Blue Tape 114 mm 1 kg 1 Phenol Formaldehyde Resin 0.25 kg 2 Asbestos raw in different grades/ 0.60 kg Asbestos Yarn Asbestos Yarn with Metallic 0.70 kg Insertion 3 Other items namely Aluminium Powder, Brass Chips, Brass Powder, Nitrile Butile Rubber, Copper Powder, Bonding Adhesive 4 Misc. items: Grinding Wheels (Diamond/ Abrasive), Electrometallic Slitting Saws, Carbide Tips, Mould Releasing Solution, Endless Emery Belts 1 kg 1 Phenol Formaldehyde Resin 0.24 kg 2 Asbestos raw in different grades/ 0.60 kg Asbestos Yarn Asbestos Yarn with Metallic 0.70 kg Insertion 3 Other items namely Aluminium Powder, Brass Chips, Brass Powder, Nitrile Butile Rubber, Copper Powder, Bonding Adhesive 4 Misc. items: Grinding Wheels (Diamond/ Abrasive), Electrometallic Slitting Saws, Carbide Tips, Mould Releasing Solution, Endless Emery Belts 1 kg 1 Alloy/Non Alloy Steel Bilets/ Rounds of relevant grade 1 No. (Export weight to be indicated) C364 Not exceeding 5% of the FOB value of export. Upto 3% of the FOB value of export. Upto 2% of the FOB value of export. Upto 3% of the FOB value of export kg 2 Thread Protectors Net to net. 3 Thread Inserts/ Cut-Off Blades Upto 2% of FOB 1 Stainless Steel Sheet/ Wide Coil of relevant grade 2 Galvanised Plain Steel Sheet/ Wide Coil 3 Copper Tube of relevant dimension 1.05 kg/kg content in kg/kg content in kg/kg content in. 4 Aluminium Sheet 1.02 kg/kg content in. 5 Isocyanate kg/kg content

365 C1886 C1887 C1888 Zinc Concentrates C365 in. 6 Polyol kg/kg content in. 7 Hermetically Sealed Compressor Net to net. 1 MT 1 Special Gelatine Based Water Resistant Slurry Explosive 2 Amonium Nitrate Based Water Resistant Slurry explosive kg kg 3 Other Explosive kg 4 Water Resistant Detonating Fuse and Cord Relays Mtr. 5 Electric Detonators No. 6 Non-Electric Detonators No. 7 Drill Rods No. 8 Drill Accessories No. 9 Assortment of Consumables 1 Lot 10 Copper Sulphate kg 11 Zinc Sulphate kg 12 Sodium Cyanide kg 13 Xanthates kg 14 MIBC kg 15 High Chrome Grinding Media kg 16 Hydrated Lime (Chemical Grade) Single/Double Walled Steel Tubes (Copper Coated) 2 Copper Anodes (Electrolytic Grade) Ball Pen Tips of Nickel Silver Wire kg 1kg 1 CRCA Strips 1.07 kg/kg content in. 1.0 Million Numbers (176.4 kg) 1 Nickel Silver Wire Dia 2.3 mm of relevant grade 1.07 kg/kg content in. 1.9 kg/kg content in. 2 Tungsten Carbide Balls 1.02 million Nos. C1889 Carbon Electrode 1 kg 1 Copper Cathode 1.07 kg/kg content in. C1890 Copper Bus Bars 1 kg 1 Copper Cathode/ Copper Wire 1.05 kg Bar / Cast Copper Rod Copper Scrap 1.07 kg C1891 Radiator made of Aluminium with Plastic Tank 1No. 1 Aluminium Tube 1.02 kg/kg content in. 2 Aluminium Foil 1.02 kg/kg content in. 3 Aluminium Sheet/ Strips 1.03 kg/kg content in. 4 Brazing Flux Up to 5% of FOB value 5 Relevant Plastic Tanks Relevant Plastic Granule C1892 Welded Steel Link Chain 1 MT 1 Copper Electrode 2 kg Net to net 1.05 kg/kg content in tank

366 C1893 C1894 Mica Heating Element (electrical heating element) Agricultural Tractor 2 Bandshaw Blade 2 Mtr. 1 kg 1 Silicon Bonded Micanite/ Heater Plate - Electrical insulating material 2 Heating Tape/ Wire- Generate Heat by current 3 Aluminized Steel Sheet - resistance to corrosion under high heat 4 Receptacle/ Terminal connection between cable and end point 1 No. A. Assembly/ Sub-Assembly/ Components: C kg/kg content in kg/kg content in kg/kg content in. Net to net. 1 Air Compressor Net to net. 2 Air/Fuel/ Oil Filter Net to net. 3 Automotive Battery Net to net. 4 Bearing (All types other than Net to net. Engine Bearings) such as ball bearings and Taper/ Cylindrical/ Needle Roller Bearings 5 Brake Assembly (Primary/ Net to net. Secondary) or components thereof 6 Cab Assembly or components Net to net. thereof 7 Clutch Assembly (including Net to net. Split/ Torgue Type) or components thereof 8 Coupler Net to net. 9 Electical Equipment such as Alternator, Starter Motor, Dynamo, Regulator, Horns and Circuit Breakers Net to net. 10 Electrical Switches/ Auto Lamps Net to net. 11 IC Engine (Complete) or Net to net. components thereof 12 V Belt and Pulley Net to net. 13 Fuel Tank Net to net. 14 Front Axle Support Net to net. 15 Front Axle (2 Wheel Drive/ 4 Net to net. Wheel Drive) including Sleeves, Spline shaft 16 Hydraulic Pump (including Net to net. Auxiliary Hydraulic Pump) 17 Hoses Net to net. 18 Hydraulic Cylinder/ Hydraulic Net to net. Valves 19 Hardware items such as Nuts, Net to net. Bolts, Pins, Washers, Spacers, Shims, Drain Plugs 20 Hood/ Bonnet Net to net. 21 Instrument Cluster Net to net. 22 Oil Seals/ O-Rings Net to net. 23 Oil Pump Net to net.

367 24 Power Stearing Unit or components thereof C367 Net to net. 25 Power Lift Complete Net to net. 26 Radiator Net to net. 27 Safety Equipment: Net to net. a) Mechanical (Rops, Safety Belt) b) Electrical (Safety Neutral Switches Safety Belt Indicator Switches) 28 Seat Assembly Net to net. 29 Silencer Net to net. 30 Tyre/ Tubes Net to net. 31 Wheel Rims Net to net. 32 Transmission complete Net to net. (consstant mesh/ synchro/ shuttle/ creeper) or components thereof 33 Three Point Linkages (Front/ Net to net. Rear) 34 Turbo-Charger Net to net. 35 Water Pump or components thereof 36 Wiring Harness including Plug Socket B. Raw Material: Net to net. Net to net. 1 Pig Iron 1.1 kg/kg content in. 2 Alloy Steel Rods/ Rounds/ Billets 3 Hot Rolled/ Cold Rolled (Sheets/ Coils) 1.1 kg/kg content in. 1.1 kg/kg content in. 4 Terne Coated Steel Sheets 1.05 kg/kg content in. 5 Plastic/ Nylon Formulation in granules/ Powder form 1.05 kg/kg content in. Note: Net content of raw material as per SION shall be of the component manufactured out of this raw material and shall not include components allowed for import. C1895 C " (600mm) complete ceiling fan with Metal Blades Copper Bowls with Lids 1 No. 1 Super Enamelled Copper Wire/ kg Clopper Wire Rod of 8 mm electrolytic Grade 2 CRNGO Sheet/ Coil 0.5mm kg thickness 3 Aluminium Alloy kg 4 Ball Bearing Oper Closed Nos. & 6202 or equivalent 5 M.S. Sheet kg 6 Aluminium Sheet/ CRCA Sheet (for Blades of fans) kg 7 Kraft Paper As per packing policy. 1 No. 1 Copper Sheet 1.05 kg/kg content in. 2 Copper Pipe of relevant 1.01 kg/kg content in

368 C1897 C1898 C1899 C1900 C1901 C1902 C1903 Brazed Wheel Chair Components made out of Steel Tube/ Section/ Profile e.g. Frames/ Cross Bar/ Leg Rest/ Arm Rest Forged Safty relief Valve for LPG Cylinder made of brass E.O.T. Crane Fabricated Articles made of SS not elsewhere specified High Grade, Annealed Sponge Iron Powder Finished/ Semi-Finished Ring Joint Gaskets made from Non-Alloy Steel Plates Hot Rolled Non-Alloy Steel Plate/ Sheet/ Strip/ Wide Coil Dimensions. 1 kg 1 Steel Tube/ Section/ Profile kg 2 Brazing Wire 0.05 kg 3 Brazing Flux kg 1 No. 1 Brass Rod Round 1.18 kgs/kg content in. 1 No. 1 Relevant Welding Wires 2% of Steel to be Welded. 2 Bearing Taper Roller/ Spherical Net to net. Roller Ball Bearing 3 POG 10 D FSL Digital Tacho Overspeed Switch combinatin Net to net. 4 Twist Knot Wire Wheel Brushes 2% of FOB value 5 DC Grinding Wheel 6 Relevant Stainless Steel Sheets 1.08 kg/kg content in 1 kg 1 SS Sheet/ Wide Coil/ Strips of 1.05 kg relevant grade 1 kg 1 Raw (Un-annealed) Sponge Iron Powder 1.01 kg 1 No. 1 Non Alloy Steel Plates 2.80 kg/kg content in. 1 MT I. Major Inputs comprising of: a) Non-Alloy Steel Melting Scrap 175 kg b) Low Ash (Ash: 12% max.) Non- Coking Coal/ Low Ash (Ash: 15% max.) Metallurgical Coke II. Additive comprising of: 1100 kg a) Low Silica (Silica: 1% Max.) 195 kg Limestone b) Bulk Ferro Alloys (Ferro - 6 kg Silicon/ Ferro Manganese/ Silico-Manganese c) Other Ferro Alloys (Ferro 3 kg Titanium/ Ferro Molybdenum/ Ferro Niobium/ Ferro Vanadium/ Ferro Nickel/ Ferro Chrome/ Charge Chrome Ferro Boron/ Ferro Phosphorous) (provided the alloying element (s) is/are actuallypresent in the Steel) d) Aluminium Bars/ Wires/ Shots/ 2.25 kg Cubes and/or Powder in Cored Wire e) Calcium Silicide Lumps and/or Powder in Cored Wire 1 kg f) Calcined Petroleum Coke 0.4 kg C368

369 g) Calcium Carbide based Desulphurisation Compound C369 III. Miscellaneous Inputs comprising of: a) Shaped Refractories (Fired/ unfired bricks/ shapes) 2.6 kg 5 kg b) Monolithic Refractories 4 kg (including Castables/ Ramming Mass/ Gunning Mixes) c) Special Refractories (continuous Casting Refractory namely, Ladle Shroud, M.B. Stopper, S.E. Nozzles/ Slide Gate Refractory/ HMD Lances/ LF Lances/ Argon Purging Refractories/ Tundish Striker Pads/ CeramicStones/ Tundish Turbo Stop 1 kg d) CI/Steel Rolls for Hot Strip Mill 1 kg e) Celox Inserts/ Oxygen 0.1 No. Measuring Probes f) Shear Blades/ Saw Blades 0.01 kg g) Ceramic Coated Oxygen Lancing 0.02 No. Pipe h) Continuous Casting Powder 0.6 kg I) Temperature Tips 0.1 Nos j) Graphite Electrodes for Ladle Furnace 0.1 kg k) Copper Lined Mould for Casting 0.02 kg l) Sampler Tips 0.15 Nos. m) Rolls for Slab Caster 0.5 kg Note: 1. The above norm is applicable only if (s) is/are manufactured through Corex Furnace-LD converter route. 2. The norms shall also be applicable for export of continuously cast steel slabs. However import item allowed atsl.no.iii(d) shall not be allowed against export of such Slab and the quantity of all other import items allowed shall be reduced by 3%. 3. Maximum quantity of Low Ash Metallurgical Coke allowed against Sl.No.I(b) shall be limited to 20% of the totalquantity of 1100 kg. C1904 Graphite Heat Exchanger (Cubical Block, Shell & Tube & Circular Block Type) 1 No. 1 Graphite Block 1.57 kg/kg content in. 2 Graphite Tube 1.37 kg/kg content in the export prdouct. 3 Non Alloy Steel Sheet 1.22 kg/kg content in. 4 Bellows 2 Nos. 5 Bellow Seal Assembly 1 No. 6 Gasket 57 Mtrs. 7 Flame Arrestor 2 Nos. 8 PRP Blower 2 Nos. 9 Quartz Glass 1 No. 10 O Ring 9 Nos. 11 Spring 5 Nos. C1905 Stainless Steel Braided 1 No. 1 S.S. Braided Teflon Hose of 1.02 Mtr./Mtr.

370 C1906 C1907 C1908 C1909 Teflon Hose Assembly for automotive application Zinc Plated Liquid Tight Steel Fitting with Ferrule & Locknut (Connector) - Size 1/2" to 4" Decanter Centrifuge Industrial Separator Lightening Arrestor (Surge Arrestor) Distribution Class C370 relevant dia & grade 2 Seamless Steel Tubes of relevant dia & grade content in export product Mtr./Mtr. content in export product. 3 Hardware Net to net. 1 No. 1 Alloy/ Non-Alloy Hexagonal Steel Bar (For Body & Nut) (a) 4 kg/kg content for sizes upto 2". (b) 5 kg/kg content for size above 2". 2 Ferrules (made of CRCA Sheet) Net to net. 3 Polypropylene (for Seal) 1.05 kg/kg content. 4 LDPE Granules (For 'O' Ring) 1.05 kg/kg content. 5 Nylon-6 (For Insuliner) 1.05 kg/kg content. 6 H.R. Non-Alloy Steel Coil/ Sheet 3.43 kg/kg content. (For Locknut) 7 Zinc 0.7% of Steel weight to be galvanized. 1 No. 1 H.R.S.S. 316 Plate 6 mm Thick for Flight 2 S.S. 316 Sheet 3 mm Thick for casing assembly 1.7 kg/kg content in flight of export product 1.2 kg/kg content in casing assembly of 3 M.S. Box Section 1.01 kg/kg content in 4 Alloy Steel Round Bar 3.0 kg/kg content in 5 S.S. 316 Bar 1.01 kg/kg content in 6 Consumable including Hard Surfacing Power 1% of FOB value 7 Component As per General Note No. 4 for Engineering Product 1 No. 1 Stainless Steel Sheet of relevant grade 1.56 kg/kg content in 2 S.S. Round Bar of relevant grade 2.70 kg/kg content in 3 Component As per General Note No. 4 for Engg. Product inserted by Public Notice No. 46 dated No. 1.Tubular Porcelain Bushings Net to Net I. Inputs for Tubular prorcelain Bushings II. Aluminium Ingots III. Metal Oxide Varistor III Inputs for Metal Oxide Varistor Maximum Quantity = KV rating of Arrestor x x Inputs of A-1804 KV rating of Arrestor x 11 gms Nos = KV rating of Arrestor divided by KV rating of Varistor

371 C1910 Lightening Arrestor (Surge Arrestor) Discharge Class I 1. Spray Dried Metal Oxide Powder 1. Metal or Metal Oxide as described below a. Zinc Oxide 1.04 kg/kg content in 1.08 kg/kg content in a. Zinc Metal 1.10 kg/kg content in b. Bismuth Oxide 1.08 kg/kg content in b. Bismuth Metal 1.10 kg/kg content in c. Cobalt Oxide 1.08 kg/kg content in c. Cobalt Metal 1.10 kg/kg content in d. Nickel Oxide 1.08 kg/kg content in d. Nickel Metal 1.10 kg/kg content in e. Antimony Trioxide 1.08 kg/kg content in f. Chromium Oxide 1.08 kg/kg content in g. Tin Oxide 1.08 kg/kg content in h. Manganese Oxide/ Manganese Dioxide h. Manganese Metal 1.08 kg/kg content in 1.10 kg/kg content in h. Manganese Carbonate 1.08 kg/kg content in i. Polyvinyl Alcohol 0.71 gm/kv j. Ammonium Polyacrylate 0.80 gm/kv j. Decyl Amine Acetate 0.80 gm/kv k.glass Frit-Silver Oxide 1 No. I. Tubular Porcelain Bushings I. Inputs for Tubular Porcelain Bushings II. Aluminium Ingots III. Metal Oxide Varistor III. Input for Metal Oxide Varistor 1. Spray Dried Metal Oxide Powder 1. Metal or Metal Oxide as described below 0.63 gm/kv Net to net Maximum Quantity = KV rating of Arrestor x x Inputof A-1804 KV rating of Arrestor x 157 gms Nos. = KV rating of Arrestor divided by KV rating of Varistor 1.04 kg/kg content in C371

372 C1911 Lightening Arrestor (Surge Arrestor) Discharge Class II a. Zinc Oxide 1.08 kg/kg content in a. Zinc Metal 1.10 kg/kg content in b. Bismuth Oxide 1.08 kg/kg content in b. Bismuth Metal 1.10 kg/kg content in C. Cobalt Oxide 1.08 kg/kg content in c. Cobalt Metal 1.10 kg/kg content in d. Nickel Oxide 1.08 kg/kg content in d. Nickel Metal 1.10 kg/kg content in e. Antimony Trioxide 1.08 kg/kg content in f. Chromium Oxide 1.08 kg/kg content in g. Tin Oxide 1.08 kg/kg content in h. Manganese Oxide/ Manganese Dioxide h. Manganese Metal h Manganese carbonate 1.08 kg/kg content in 1.10 kg/kg content in 1.08 kg/kg content in i. Polyvinyl Alcohol 1.13 gm/kv j. Ammonium Polyacrylate 1.23 gm/kv j. Decyl Amine Acetate 1.23 gm/kv k. Glass Frit-Silver Oxide 0.9 gm/kv 1 No. I. Tubular Porcelain Bushings I. Inputs for Tubular Porcelain Bushings II Aluminium Ingots III Metal Oxide Varistor Input for Metal Oxide Varistor 1 Spray Dried Metal Oxide Powder Metal or Metal Oxide as described below a. Zinc Oxide Net to net Maximum Quantity = KV rating of Arrestor x x Inputs of A-1804 KV rating of Arrestor x 141 gms Nos = KV rating of Arrestor divided by KV rating of Varistor 1.04 kg/kg content in 1.08 kg/kg content in a. Zinc Metal 1.10 kg/kg content in b. Bismuth Oxide 1.08 kg/kg content in C372

373 C1912 Lightening Arrestor (Surge Arrestor) Discharge Class III C373 b. Bismuth Metal 1.10 kg/kg content in c. Cobalt Oxide 1.08 kg/kg content in c. Cobalt Metal 1.10 kg/kg content in d. Nickel Oxide 1.08 kg/kg content in d. Nickel Metal 1.10 kg/kg content in e. Antimony Trioxide 1.08 kg/kg content in f. Chromium Oxide 1.08 kg/kg content in g. Tin Oxide 1.08 kg/kg content in h. Manganese Oxide/ Manganese Dioxide h. Manganese Metal 1.08 kg/kg content in 1.10 kg/kg content in h. Manganese Carbonate 1.08 kg/kg content in i. Polyvinyl Alcohol 1.52 gm/kv j. Ammonium Polyacrylate 1.63gm/KV j. Decyl Amine Acetate 1.63 gm/kv k. Glass Frit - Silver Oxide 1.23gm/KV 1 No. I. Tubular Porcelain Bushings I. Inputs for Tubular Porcelain Bushings II. Aluminium Ingots III Metal Oxide Varistor Input for Metal Oxide Varistor 1. Spray Dried Metal Oxide Powder 1. Metal or Metal Oxide as described Below a. Zinc Oxide a Zinc Metal b. Bismuth Oxide Net to net (KV rating of Arrestor x x Inputs of A-1804) KV rating of Arrestor x 127 gms Nos= KV rating of Arrestor divided by KV rating of Varistor 1.04 kg/kg content in export Product 1.08 kg/kg content in export Product 1.10 kg/kg content in export Product 1.08 kg/kg content in export Product b. Bismuth Metal 1.10 kg/kg content in export Product c. Cobalt Oxide 1.08 kg/kg content in export Product c. Cobalt Metal 1.10 kg/kg content in export Product

374 d. Nickel Oxide 1.08 kg/kg content in export Product d. Nickel Metal 1.10 kg/kg content in export Product e. Antimony Trioxide 1.08 kg/kg content in export Product f. Chromium Oxide 1.08 kg/kg content in export Product g.tin Oxide 1.08 kg/kg content in export Product h. Manganese Oxide/ Manganese Dioxide h. Manganese Metal 1.08 kg/kg content in export Product 1.10 kg/kg content in export Product h. Manganese carbonate 1.08 kg/kg content in export Product i. Polyvinyl Alcohol 2.34 gm/kv j. Ammonium Polyacrylate 2.53 gm/kv j. Decyl Amine Acetate 2.53 gm/kv k. Glass Frit - Silver Oxide 1.93 gm/kv C1913 Lightening Arrestor (Surge Arrestor) Discharge Class IV 1.No. I. Tubular Porcelain Bushings I. Inputs for Tubular Porcelain Bushings II. Aluminium Ingots III. Metal Oxide Varistor Input for Metal Oxide Varistor Net to net Maximum Quantity = (KV rating of Arrestor x x Inputs of A-1804) KV rating of Arrestor x 138 gms Nos = KV rating of Arrestor divided by KV rating of Varistor 1. Spray Dried Metal Oxide Powder 1.04 kg/kg content in 1. Metal or Metal Oxide as described below a. Zinc Oxide a.. Zinc Metal b. Bismuth Oxide 1.08 kg/kg content in 1.10 kg/kg content in 1.08 kg/kg content in b. Bismuth Metal 1.10 kg/kg content in c. Cobalt Oxide 1.08 kg/kg content in c. Cobalt Metal 1.10 kg/kg content in d. Nickel Oxide 1.08 kg/kg content in d. Nickel Metal 1.10 kg/kg content in e. Antimony Trioxide 1.08 kg/kg content in C374

375 C1914 Metal Oxide Varistor ## (MOV) Distribution Class f. Chromium Oxide 1.08 kg/kg content in g. Tin Oxide 1.08 kg/kg content in h. Manganese Oxide/ Manganese Dioxide h. Manganese Metal 1.08 kg/kg content in 1.10 kg/kg content in 1.08 kg/kg content in 1.10 kg/kg content in h. Manganese Carbonate 1.08 kg/kg content in i. PolyVinyl Alcohol 3.56 gm/kv j. Ammonium Polyacrylate 3.85 gm/kv j. Decyl Amine Acetate 3.85 gm/kv k. Glass Frit - Silver Oxide 2.83 gm/kv 1 No. 1.Spray Dried Metal Oxide Powder 1.Metal or Metal Oxide as described below a. Zinc Oxide 1.04 kg/kg content in 1.08 kg/kg content in a. Zinc Metal 1.10 kg/kg content in b. Bismuth Oxide 1.08 kg/kg content in b. Bismuth Metal 1.10 kg/kg content in c. Cobalt Oxide 1.08 kg/kg content in c. Cobalt Metal 1.10 kg/kg content in d. Nickel Oxide 1.08 kg/kg content in d. Nickel Metal 1.10 kg/kg content in e. Antimony Trioxide 1.08 kg/kg content in f. Chromium Oxide 1.08 kg/kg content in g. Tin Oxide 1.08 kg/kg content in h. Manganese Oxide/ Manganese Dioxide h. Manganese Metal 1.08 kg/kg content in 1.10 kg/kg content in h. Manganese carbonate 1.08 kg/kg content in i. Polyvinyl Alcohol 0.71 gm/kv j. Ammonium Polyacrylate 0.80 gm/kv C375

376 C1915 Metal Oxide Varistor ## (MOV) Distribution Class I C1916 Metal Oxide Varistor ## (MOV) Distribution Class II j. Decyl Amine Acetate 0.80 gm/kv k. Glass Frit - Silver Oxide 0.63 gm/kv 1 No. 1. Spray Dried Metal Oxide Powder 1. Metal or Metal Oxide as described below a. Zinc Oxide 1.04 kg/kg content in 1.08 kg/kg content in a. Zinc Metal 1.10 kg/kg content in b. Bismuth Oxide 1.08 kg/kg content in b. Bismuth Metal 1.10 kg/kg content in c. Cobalt Oxide 1.08 kg/kg content in c. Cobalt Metal 1.10 kg/kg content in d. Nickel Oxide 1.08 kg/kg content in d. Nickel Metal 1.10 kg/kg content in e. Antimony Trioxide 1.08 kg/kg content in i. Chromium Oxide 1.08 kg/kg content in j. Tin Oxide 1.08 kg/kg content in h. Manganese Oxide/ Manganese Dioxide h. Manganese Metal 1.08 kg/kg content in 1.10 kg/kg content in h. Manganese carbonate 1.08 kg/kg content in i. Polyvinyl Alcohol 1.13 gm/kv j. Ammonium Polyacrylate 1.23 gm/kv j. Decyl Amine Acetate 1.23 gm/kv k. Glass Frit - Silver Oxide 0.9 gm/kv 1 No. 1. Spray Dried Metal Oxide Powder 1. Metal or Metal Oxide as described below a. Zinc Oxide 1.04 kg/kg content in 1.08 kg/kgcontent in a. Zinc Metal 1.10 kg/kgcontent in b. Bismuth Oxide 1.08 kg/kgcontent in b. Bismuth Metal 1.10 kg/kgcontent in C376

377 C1917 Metal Oxide Varistor ## (MOV) Distribution Class III c. Cobalt Oxide 1.08 kg/kgcontent in c. Cobalt Metal 1.10 kg/kgcontent in d. Nickel Oxide 1.08 kg/kgcontent in d. Nickel Metal 1.10 kg/kgcontent in e. Antimony Trioxide 1.08 kg/kgcontent in f. Chromium Oxide 1.08 kg/kgcontent in g. Tin oxide 1.08 kg/kg content in h. Manganese Oxide/ Manganese Dioxide h. Manganese Metal 1.08 kg/kgcontent in 1.10 kg/kgcontent in h. Manganese carbonate 1.08 kg/kgcontent in i. Polyvinyl Alcohol 1.52 gm/kv j. Ammonium Polyacrylate 1.63 gm/kv j. Decyl Amine Acetate 1.63 gm/kv k. Glass Frit - Silver Oxide 1.23 gm/kv 1 No. 1. Spray Dried Metal Oxide Powder 1. Metal or Metal Oxide as described below a. Zinc Oxide 1.04 kg/kgcontent in 1.08 kg/kgcontent in a. Zinc Metal 1.10 kg/kgcontent in b. Bismuth Oxide 1.08 kg/kgcontent in b. Bismuth Metal 1.10 kg/kgcontent in c. Cobalt Oxide 1.08 kg/kgcontent in c. Cobalt Metal 1.10 kg/kgcontent in d. Nickel Oxide 1.08 kg/kgcontent in d. Nickel Metal 1.10 kg/kgcontent in e. Antimony Trioxide 1.08 kg/kgcontent in f. Chromium Oxide 1.08 kg/kgcontent in g. Tin Oxide 1.08 kg/kgcontent in h. Manganese Oxide/ Manganese Dioxide 1.08 kg/kgcontent in C377

378 C1918 Metal Oxide Varistor ## (MOV) Distribution Class IV C1919 Brake Lining for Motor Vehicles with Aramid and NBR h. Manganese Metal 1.10 kg/kgcontent in h. Manganese carbonate 1.08 kg/kgcontent in i. Polyvinyl Alcohol 2.34 gm/kv j. Ammonium Polyacrylate 2.53gm/KV j. Decyl Amine Acetate 2.53 gm/kv k. Glass Frit - Silver Oxide 1.93 gm/kv 1 No. 1. Spray Dried Metal Oxide Powder 1. Metal or Metal Oxide as described below a. Zinc Oxide 1.04 kg/kg content in 1.08 kg/kg content in a. Zinc Metal 1.10 kg/kg content in b. Bismuth Oxide 1.08 kg/kg content in b. Bismuth Metal 1.10 kg/kg content in c. Cobalt Oxide 1.08 kg/kg content in c. Cobalt Metal 1.10 kg/kg content in d. Nickel Oxide 1.08 kg/kg content in d. Nickel Metal 1.10 kg/kg content in e. Antimony Trioxide 1.08 kg/kg content in f. Chromium Oxide 1.08 kg/kg content in g. Tin Oxide 1.08 kg/kg content in h. Manganese Oxide/ Manganese Dioxide h. Manganese Metal 1.08 kg/kg content in 1.10 kg/kg content in h. Manganese carbonate 1.08 kg/kg content in I. Polyvinyl Alcohol 3.56 gm/kv j. Ammonium Polyacrylate 3.85 gm/kv j. Decyl Amine Acetate 3.85 gm/kv k. Glass Frit - Silver Oxide 2.83 gm/kv 1 No. 1 Nitrile Rubber 1.05 kg/kg content in 2 Brass Chips 1.02 kg/kg content in 3 Aramid Pulp 1.05 kg/kg content in 4 Resin (relevant) 1.05 kg/kg content in C378

379 C1920 C1921 C1922 Telephone Cables of different pair and Dia U/G BSW Cable, Not elsewher specified Polyurethane Type Air Filters Plastic Air Filters C379 5 Cellulose / Mineral / Glass Fibre 1.05 kg/kg content in 6 Fellite 1.05 kg/kg content in 7 Pottassium Titanate 1.05 kg/kg content in 8 Zinc Oxide 1.05 kg/kg content in 9 Rubber Accelerator Restricted to 2% of the weight of the Nitrate Rubber 1 km 1 Copper in the form of CC rods / Wire / Bars EC Grade 1.01 kg/kg content in 2 HDPE Compound 1.05 kg/kg content in 3 Filling Jelly 1.01 kg/kg content in 4 Flooding Jelly 1.01 kg/kg content in 5 Poly Co Polymer 1.02 kg/kg content in 6 Aluminium Foil Stock 1.02 kg/kg content in 7 LDPE Compound 1.05 kg/kg content in 1 kg. 1 Filter Paper 1.02 kg/kg content in 2 Polyol 1.02 kg/kg content in 3 ISO CYANATE in the ratio of 70:30 4 Perforated and Expanded Cold Rolled Steel Sheet 1.02 kg/kg content in 5 Hot Melt Polyamide Import Item No. 5&6 The two altogether be restriced up to 2% of the FOB value 6 PP mold Release Agent 7 Unit Box Import Item No. 7&8 Will be allowed as per packing policy 8 Multi Carton (5Ply) 1.kg. 1 Filter Paper 1.03 kg/kg content in expot product 2 Polypropylene 1.03 kg/kg content in expot product 3 Rubber Gasket On Net to net basis 4 Mold Release Agent Import Item No. 4-5&6 To be restricted upto 2% of the FOB value to be allowed as per packing policy 5 Unit Box 6 Multi Carton C No. 1 Batteries Net to net

380 REVA electrically operated vehicle (four wheeler) 2 Elecronic Speed Controler Net to net 3 Solenoid Net to net 4 Passenger Car Tyre Not to net 5 DC brushless Battery Fan Net to net 6 Electric DC Motor Net to net 7 Plastic Sheets ABS / PMMA (poly Methyl metha-acrylate 8 Plastic Sheets (Raw material) ABS 9 Soft touch (ABS) Acrylonitrile Butadiene styrene 10 Permanent Magnet DC Motors Net to net 11 Relays Net to net 12 Watering System for batteries Net to net 13 Primaire D' Adherence 38 Modular system (electronic part of central locking) C kg/kg content in 1.10 kg/kg content in 1.10 kg/kg content in 14 Hardener for Import Item NO &16 To be allowed up to 2% of FOB value 15 Vernis Soft Feel Mat 16 Hardener 17 Back Assembly (climate control Net to net seat) 18 Cushion Assembly (climate Net to net control seat) 19 Controller (climate control seat) Net to net 20 Controller Interface Cable Net to net 21 Controller Power Cable Net to net 22 CD Player with Speakers Net to net 23 Relays for AC Net to net 24 Relays for Heaters Net to net 25 Alloy Wheels Net to net 26 AC Condensor Fan Net to net 27 Heater pad for Batteries Net to net 28 Charging Plug Male Net to net 29 Charging Plug Female Net to net 30 Battery Inter connects Net to net 31 Main Plug Net to net 32 Battery Harness Net to net 33 Charger Parts (Anne-2) Net to net 34 DC_DC Converter Parts (Annex- Net to net 3) 35 A/C Controller Parts (Annex-4) Net to net 36 Modular System with micro siren Net to net 37 Central unit (electronic part of central locking) Net to net Net to net

381 C1924 C1925 C1926 Transmission Line Tower Hardwares and Accessories Metal Halide Lamp Double Ended Quartz Glass Shell 150 W Metal Halide Lamp Double Ended Quartz Glass Shell 70 W 39 Steel Tube round 1.02 kg/kg content in 40 Steel Tube Square 1.02 kg/kg content in 41 Steel Sheet 1.04 kg/kg content in 42 Fasteners Net to net 43 Flange Net to net 44 Brackets Net to net 45 Weldment Net to net 1 MT 1 a) Aluminium Wires/ Rods 1.01 MT/MT content in b) Aluminium Alloy Wire/ Rods 1.01 MT/MT content in 2 a) Aluminium Ingots 1.05 MT/MT content in b) Aluminium Alloy Ingots LM6/LM8) 1.05 MT/MT content in 3 MS Billets 1.18 MT/MT content in 4 M.S. Round / M.S. Bars/Rods 1.15 MT/MT content in 5 Non Alloy Steel Plates 1.15 MT/MT content in 6 Synthetic Rubber (Grade Skyprene B-30/Grade Bayprem) 7 Neoprene Rubber Bush Net to net 8 Washers Net to net 9 Bolts and Nuts Net to net 1.05 MT/MT content in 10 Zinc 4% of Steel to be galvanized 10,000 Nos. 1 ARC Tube for MH Lamps Nos. W 2 UV Block Quartz Main Tube OVISIL 482/ / kgs 3 Quartz Tube for Exhaust OVISIL Net to net / Molybdenum Foil 4X Mtrs. 5 Tam Foil 1X0.049MM 102 Mtrs. 6 Getter ST 101/DF/50 or Getter Nos. NGE 101/DF/50 7 Ceramic Cap-R7S-10ST End Caps R7S Ceramic Parts Nos. 8 Sauereissen Cement No.13 USA 14 kgs. Sauereissen No ,000 Nos 1 ARC Tube for MH Lamps 70 W Nos. 2 UV Block Quartz Main Tube 167 kgs OVISIL 482/ / Quartz Tube for Exhaust OVISIL Net to net / Molybdenum Foil 4X Mtrs. 5 Tantalam Foil 1X0.049 MM 102 Mtrs C381

382 C1927 C1928 Fabricated Steel Hardware/ Structure/ Articles not elsewhere specified made out of MS CR Plates/ Sheets/ Coils/ Strips Distribution Type Fuel Injection Pump for Diesel Engines 6 Getter ST 101/DF/50 or Getter NGE 101/DF/ Nos. 7 Ceramic Cap RX7S Nos. 8 Ceramic Cement Sauereissen No kgs. 1. Kg 1 MS CR Sheets/ Coils/ Strips 1.05 kg/kg content in 2 Zinc Ingot (to be allowed only in 0.05 kg case is galvanized 1 No. 1 Relevant Components As per General Note No. 4 for Engineering Product inserted by Public Notice No. 46 dated Honing Tools 3% of FOB value C1929 C1930 Hermetically Sealed Comressors for Refrigerators & Commercial Refrigeration Applications using Ecofriendly gases. Zinc Ingots 3 Grinding Wheel 4 Drills/Deep Hole Drills 5 Reamers 6 Inserts 7 Honing Tools 8 Abrasive Brush 9 Steel Shots 1 Nos 1 Components Net to net basis 2 CRNGO Steel Sheets 1.34 kg/kg content in 3 Copper Wire 1 kg/kg content in 4 Hot Rolled Non-Alloy Steel Sheet/Wide Coil C kg/kg content in 5 Polyester Film 1.02 kg/kg content in 6 Polyester Stator Lacing Cord 1 Mtr / Mtr content in 7 Flapper Valve Steel 1 kg/kg content in 8 Copper Tube 1 kg/kg content in 9 Aluminium Ingot 1 kg/kg content in 10 PBT/ Duranex 1 kg/kg content in 11 Refrigeration Oil 1 kg/kg content in 1 MT 1 Zinc Ash and residue containing Zinc in the range of 65-80% 2 Metallurgical Coke 750 kg MT of Zinc metal in Zinc Dross

383 3 furnace Oil (LSHS)/Light Diesel Oil C kg 4 LPG 74 kg Note : 1. The above norms will be applicable to primary producer using the imperial Smelting Technology.Note : 2. The applicant will also furnish clearance from the M/o. Environment and Forest for import of Zinc Ash and residues alongwith application for Advance License. C1931 Copper / Aluminium Conductors screened with semi conducting compound, XLPE Insulated G.I Wire, Armoured / Unarmoured PVC Sheathed Cable for above 1.1 KV. C1932 Iron Ore including Processed Iron Ore C1933 Tungsten Wire (0.525 mm dia) C1934 Molybdenum Wire (0.82 mm dia 1 km 1 Continuous Cast Copper Rod/ Cathodes/ Wire Bars / Wire Rod / Copper Tape / Copper Foil (EC Grade) 1.01 kg/kg content in 2 Aluminium Ingots Rods 1.01 kg/kg content in 3 XLPE C ompound/cross Linkable LDPE Compound 4 PVC Compound a) PVC Resin b) Plasticizer c) Lubricant d) Filler material (Calcium Carbonate/Alumina/ Kolin 1.05 kg/kg content in 1.05 kg/kg content in 0.57 kg 0.11 kg kg 5 Semi Conducting Compound 1.05 kg/kg content in 1 MT 1 Tricone Rock Roller Bits with Nozzle Assembly 1% of FOB value of resultant product 1 kg 1 Ammonium Paratungstate 1.74 Kg./Kg. Export of Tungsten Wire 1 kg 1 Molybdenum Powder 99.5% 1.15 Kg Pure 2 Graphite Lubricant 0.05 Kg C1935 Cast Basalt Liner Pipe 1 kg 1 Basalt Rock 1.1 Kg C1936 Ferro Titanium Cored 1 kg (powder 1 Ferro Titanium Powder (Ti kg/kg content Wire content) 72%) in 2 CRCA Non-alloy Steel Strips kg/kg content in C1937 C1938 Ballpoint Pen Tips made of brass Plastic Assembly Fitted with Cross Flow Fan, Mounting Bracket, Stepper Motor and Motor 1 million 1 Round Brass Wire 340 kg number (190 kg.) 2 Tungsten Carbide Balls 1.02 Million No. (1.02 kg) 3 Cutting Tools, Drill Oil & 2% of FOB value Chemical 1 No. 1 ABS 6.72 Kg 2 ABS/AS-30% GF Fiber 896 gm 3 Motor HHF - 27 BG 83 Net to net 4 Stepper Motor MP-35-A. Net to net 5 Rubber Hub 60 x20 L Net to net 6 Shaft Dia 6 x 35 mm L Net to net 7 Plastic Bush Dia 6 mm. Net to net 8 Balance Weights (3 mm/5 Net to net mm/12 mm). 9 Drain Hose 19 mm Net to net

384 C1939 Galvanised Steel Tape (10 mm - 40 mm with) C1940 C1941 C1942 C1943 C1944 C1945 C1946 C1947 C1948 C1949 (I) Spring Brake Chamber Type-24/30 L/s (With two Diaphragms) Long Stroke (ii) Spring Brake Chamber Type - 24/30 S/S (With two Diaphragms) (iii) Spring Brake Chamber Type - 30/30 S/S (With two Diaphrams) Tapping Adaptor WES (Size 1) Tapping Adaptor WES (Size 2) Tapping Adaptor WEN (Size 1) Tapping Adaptor WE (Size 1) Tapping Adaptor WE (Size 2) Reversible Tapping Chucks TA 12 Reversible Tapping Chucks TA 20 Adaptor Sub-assembly WEN 101 BG 1 kg 1 Non Alloy Steel Wide Coils 1.07 kg/kg content in 2 Zinc As per Engg. Table No No. 1 Diaphragms Net to net 2 Non-Alloy HR/ CR Coil 1.26 kg/kg content in 3 Aluminium unwrought or Plate/Sheet/Strips MS Bar/Road 4 MS Bar/Rods, Spring wire/ Rod/ Bar C kg/kg content in 1.10 kg/kg content in 1 No. 1 Alloy steel rounds/bars 3.39 kg/kg content in 2 Torque drive Net to net 3 Plate springs Net to net 1 No. 1 Alloy steel rounds/bars 3.25 kg/kg content in 2 Torque drive Net to net 3 Plate springs Net to net 1 No. 1 Alloy steel rounds/bars 3.50 kg/kg content in 1 No. 1 Alloy steel rounds/bars 2.87 kg/kg content in 1 No. 1 Alloy steel rounds/bars 2.59 kg/kg content in 1 No. 1 Alloy steel rounds/bars 2.83 kg/kg content in 2 Circlip Net to net 3 Deep groove ball bearing Net to net 4 Shoulder Sleeve bearing Net to net 5 Shim Net to net 1 No. 1 Alloy steel rounds/bars 2.47 kg/kg content in 2 Deep groove ball bearing Net to net 3 Shoulder Sleeve bearing Net to net 4 Shim Net to net 5 Disc./Retaining ring Net to net 1 No. 1 Alloy steel rounds/bars 2.68 kg/kg content in Portable Generator/Internal Combustion Engine for Portable Generator/Pump Set run 3 CRNGO Silicon electrical steel sheet 1 No. 1 One side Zinc Coated Steel Sheet 1.12 kg/kg content in 2 Terne Sheet 1.12 kg/kg content in 1.40 kg/kg content in

385 on Kerosine & Petrol 4 Electrolytic continuous cast coper rod 5 Hot dipped Aluminium coated Steel Sheet C kg/kg content in 1.12 kg/kg content in 6 Aluminium Alloy Ingots 1.03 kg/kg content in Note : Components, if required, may be allowed as per General Note No. 4 for Engg. Product inserted by Public Notice No. 46 dated C1950 Anode Slime containing Gold and Silver in Black powder form 1 kg 1 Copper Concentrate (Gold and Silver Content only) Containing Gold and Silver in Blackish Dark Green Powder Form Gold kg/kg content in the export product Silver kg/kg content in the Note : 1.The gold and silver content in copper concentrate as declared in the import document is to be accounted for as per the above SION.Note : 2. The above SION is to allow duty exemption for gold and silver only. The copper contained in the concentrate will be cleared by payment of applicable customs duty. C1951 C1952 C inches Colour Picture Tube (CPT) integrated with Deflection Yoke. Seismic Cable- Type RSR 3 Cable double ended, 165 M long Hermetically sealed comprssor Pump Kit assembly 1 No inches Bare Colour Picture Net to net Tube 2 EPS As per packing policy 3 Paper (Kraft) As per packing policy 1 No. 1 Thermoplastic Polyurethane 1.5 kg/kg content in 1 No. RAW Material :- 1 Nitrite Rubber coated steel 1.79 kg/kg sheet/wide coil 2 Flapper Valve Steel sheet/wide coil 1.18 kg/kg 3 Relevant Cast iron part castings: 1.16 kg/kg of the cast iron part castings a) Crankcase b) Crankshaft c) Outboard Bearing d) Valve plate e) Cylinder Head Components:- 1 Piston Sintered 1 No. net to net 2 Connecting Rod 1 No. net to net 3 Cover Muffler casting 1 No. net to net 4 Roll Pin 1 No. net to net 5 Intake valve pin 2 Nos. net to net 6 Screw Outboard bearing 3 Nos. net to net 7 Muffler screw 2 Nos. net to net 8 Screw vylinder head 4 Nos. net to net 9 Screw Discharge 2 Nos. net to net 10 Rivet 2 Nos net to net C1954 Tube light ballast 18 1 No. 1 Copper Rod 67 grams watts & 36 watts 2 Electrical Steel Sheets/Coils 358 grams

386 weighing 451 grams C386 Grade 400 & above 3 Contact Pin 2 Nos. on net to net basis 4 Impregnated Lacquer 4% of FOB value C1955 Cupro Nickel Tubes 1 kg 1 Cupro Nickel Scrap of relevant grade C1956 C1957 C1958 C1959 C1960 High Chrome Castings & Grinding Media Balls for iron ore grinding mills LPG R egulator/ Coupling in CKD/ Assembled Condition Disposable Cylinder Pressure Die Cast/ Sand Cast Components/ Articles made of Aluminum Alloy Lead Alloy in the form of : Bar/ Anode/ Ingot/ Slab/ 1.09 kg 1 MT 1 a) High Carbon Ferro Chrome kg./kg. Cr content in export product b) Low Carbon Ferro Chrome (including Nitrogen bearing LC FeCr not exceeding 20% of total quantity) kg./kg. Cr content in export product 2 Unwrought Nickel 1.02 kg/.kg. Ni content in export product 3 Ferro Molybdenum 1.40 kg/.kg. Mo content in export product 4 Carbon Steel Melting Scrap kg/.kg. Fe content in export product - (0.357 x Quantity of HC & LC Ferro Chrome allowed under s.no.1) x quantity of Ferro Molybdenum allowed under s.no. 3) 5 Ceramic Grains (for High Chromi Castings only) 4% of FOB price 6 Grinding Wheels (for High 2% of FOB price Chrome Castings only) 1 No. 1 Relevant Zinc Alloy 1.03 kg./kg. Content in 1 No. 1 CRCA Prime Cold Rolled Steel/in Sheet/ coil (! Mm to 3 mm thick) 1.24 kg./kg. Content in 2 Non Alloy Steel Wire Rod 1.02 kg./kg. Content in 3 Welding Rods 1% of the weight of the Steel to be welded 4 Paints/Primer Value to be restricted within 2% of the FOB value 5 Safety Relief Disk 1 No. 6 Freon Valve 1 No. 1 kg 1 Relevant Aluminum Alloy Ingots 1.06 kg/kg content in 1 kg 1 Lead Ingot 1.02 kg/kg content in Pigs Lead Scrap 1.06 kg/kg content in

387 C1961 C1962 Bismuth Alloy in the form of : Rod/ Wire/ Strips/ Sheet/ Foil/ Preforms/ Section Tube Lead Alloy in the form of : Rod/ Wire/ Sheet/ Foils/ Reforms/ Sections/ Tube 2 Tin Ingot Tin Scrap 3 Antimony Ingot Antimony Scrap 4 Copper Ingot Copper Scrap 4 Bishmuth Ingot Bishmuth Scrap 5 Zinc Ingot Zinc Scrap 6 Cadmium Ingot Cadmium Scrap 1 kg 1 Bismuth Ingot C kg/kg content in 1.06 kg/kg content in 1.02 kg/kg content in 1.06 kg/kg content in 1.02 kg/kg content in 1.06 kg/kg content in 1.02 kg/kg content in 1.06 kg/kg content in 1.02 kg/kg content in 1.06 kg/kg content in 1.02 kg/kg content in 1.06 kg/kg content in 1.03 kg/kg content in 1 Bismuth Scrap 1.07 kg/kg content in 2 Tin Ingot 1.03 kg/kg content in 2 Tin Scrap 1.07 kg/kg content in 3 Lead Ingot 1.03 kg/kg content in 3 Lead Scrap 1.07 kg/kg content in 4 Antimony Ingot Antimony Scrap 4 Copper Ingot Copper Scrap 5 Zinc Ingot 1.03 kg/kg content in 1.07 kg/kg content in 1.03 kg/kg content in 1.07 kg/kg content in 1.03 kg/kg content in 5 Zinc Scrap 1.07 kg/kg content in 6 Cadmium Ingot 1.03 kg/kg content in 6 Cadmium Scrap 1.07 kg/kg content in 1 kg 1 Lead Ingot 1.03 kg/kg content in 1 Lead Scrap 1.07 kg/kg content in 2 Tin Ingot 1.03 kg/kg content in

388 C1963 C1964 Cadmium Alloy in the form of : Bar/ Anode/ Ingot/ Slab/ Pigs Cadmium Alloy in the form of : Rod/ Wire/ Strip/ Sheet/ Foil/ Preforms/ Sections/ Tube 2 Tin Scrap 1.07 kg/kg content in 3 Antimony Ingot 1.03 kg/kg content in 3 Antimony Scrap 1.07 kg/kg content in 4 Copper Ingot 1.03 kg/kg content in 4 Copper Scrap 1.07 kg/kg content in 5 Bismuth Ingot 1.03 kg/kg content in 5 Bismuth Scrap 1.07 kg/kg content in 6 Zinc Ingot 1.03 kg/kg content in 6 Zinc Scrap 1.07 kg/kg content in 7 Cadmium Ingot 1.03 kg/kg content in 7 Cadmium Scrap 1.07 kg/kg content in 1 kg 1 Cadmium Ingot Cadmium Scrap 2 Tin Ingot Tin Scrap 3 Lead Ingot Lead Scrap 4 Antimony Ingot Antimony Scrap 5 Copper Ingot Copper Scrap 6 Bismuth Ingot Bismuth Scrap 7 Zinc Ingot Zinc Scrap 1 kg 1 Cadmium Ingot Cadmium Scrap 2 Tin Ingot Tin Scrap 1.02 kg/kg content in 1.06 kg/kg content in 1.02 kg/kg content in 1.06 kg/kg content in 1.02 kg/kg content in 1.06 kg/kg content in 1.02 kg/kg content in 1.06 kg/kg content in 1.02 kg/kg content in 1.06 kg/kg content in 1.02 kg/kg content in 1.06 kg/kg content in 1.02 kg/kg content in 1.06 kg/kg content in 1.03 kg/kg content in 1.07 kg/kg content in 1.03 kg/kg content in 1.07 kg/kg content in C388

389 C1965 Tin alloy in the form of : Rod/ Wire/ Strip/ Sheet/ Foil/ Preforms/ Section/ Tube C1966 Bismuth Alloy in the form of : Bar/ Anode/ Ingot/ Slab/ Pigs 3 Lead Ingot Lead Scrap 4 Antimony Ingot Antimony Scrap 5 Copper Ingot Copper Scrap 6 Bismuth Ingot Bismuth Scrap 7 Zinc Ingot Zinc Scrap 1 kg 1 Tin Ingot Tin Scrap 2 Lead Ingot Lead Scrap 3 Antimony Ingot Antimony Scrap 4 Copper Ingot Copper Scrap 5 Bismuth Ingot Bismuth Scrap 6 Zinc Ingot Zinc Scrap 7 Cadmium Ingot Cadmium Scrap 1 kg 1 Bismuth Ingot Bismuth Scrap 2 Tin Ingot Tin Scrap 3 Lead Ingot Lead Scrap 1.03 kg/kg content in 1.07 kg/kg content in 1.03 kg/kg content in 1.07 kg/kg content in 1.03 kg/kg content in 1.07 kg/kg content in 1.03 kg/kg content in 1.07 kg/kg content in 1.03 kg/kg content in 1.07 kg/kg content in 1.03 kg/kg content in 1.07 kg/kg content in 1.03 kg/kg content in 1.07 kg/kg content in 1.03 kg/kg content in 1.07 kg/kg content in 1.03 kg/kg content in 1.07 kg/kg content in 1.03 kg/kg content in 1.07 kg/kg content in 1.03 kg/kg content in 1.07 kg/kg content in 1.03 kg/kg content in 1.07 kg/kg content in 1.02 kg/kg content in 1.06 kg/kg content in 1.02 kg/kg content in 1.06 kg/kg content in 1.02 kg/kg content in 1.06 kg/kg content in C389

390 C1967 C1968 C1969 C1970 C1971 C1972 C1973 Lead Concentrates Forged Steel Balls of Size upto 12mm dia made of Non-alloy steel Alloy Steel Stainless Steel. Forged Steel Balls of Size more than 12mm diaup to 40mm dia made of Non-alloy steel Alloy Steel Stainless Steel. Geophysical Equipment- HGS 2BP Connector Silver Targets/Discs 99.9% purity. Computer Mechinery Parts made of E.G. Steel Sheets Resessed ball bearing cages 4 Antimony Ingot Antimony Scrap 5 Copper Ingot Copper Scrap 6 Zinc Ingot Zinc Scrap 7 Cadmium Ingot Cadmium Scrap 1 MT 1 Copper Sulphate as per IS Zinc Sulphate in Crystalline kg grade/form. 3 Sodium Cyanide as per IS kg Xanthates kg 5 MIBC kg 6 High Chrome Grinding Media kg 7 Hydrated Lime with minimum 80% CaO content; 100 MESH 90%. 1 kg 1 Wire/Wire Rod of relevant grade of Steel 2 Flashing/Lapping Plates, Grinding wheels, Polishing compound. 1 kg 1 Wire/Wire Rod of relevant grade of Steel 2 Flashing/Lapping Plates, Grinding wheels, Diamond dresser, Polishing compound. 1 No. 1 Thermoplastic Polyurethane 20% GF (Elastollan-R 3000) 1 kg 1 Silver Ingots 99.9% purity. 1 Scrap Silver/Used Silver Targets/ Discs. C kg/kg content in 1.06 kg/kg content in 1.02 kg/kg content in 1.06 kg/kg content in 1.02 kg/kg content in 1.06 kg/kg content in 1.02 kg/kg content in 1.06 kg/kg content in kg kg 1.45 kg Within 1% of FOB value of exports kg Within 1% of FOB value of exports kg/kg content in 1.01 kg/kg content in 1.02 kg/kg content in 1 No. 1 E. G. Steel Sheets 1.20 kg/kg content in 1 kg 1 Steel Strips 1.83 kg/kg content in C1974 Resessed taper roller 1 kg 1 Steel Strips 3.20 kg/kg content in

391 C1975 C1976 C1977 C1978 C1979 C1980 bearing cages All Types of Control and Speedometer Cables, Outer & Inner Cables (Automotive Application) LT/HT Aerial Bunched/ Cables 1x SQMM LT/HT Aerial Bunched Cables 3x25 + 1x25 SQMM LT/HT Aerial Bunched Cables 3x50 + 1x35 SQMM power Entry Components without wire harness Electrical Aluminium Cutout C391 1 kg 1 Steel Wire 1.05 kg/kg content in 2 Steel Stranded Wire 1.02 kg/kg content in 3 Flexible Transmission Shaft 1.02 kg/kg content in 4 Components Net to Net 5 Plastic Granules 1.05 kg/kg content in 6 Plastic Tubing 1.02 kg/kg content in 7 Zinc 1.10 kg/kg content in 1 KM 1 Aluminium Ingot 68 kg 2 XLPE Compound 26 kg 3 Aluminium-Magnesium-Silicon Alloy-Ingot 68 kg a) Primary unalloyed Aluminium 1.02 kg/kg Content in. b) Magnesium 1.10 kg/kg Content in. c) Silicon kg/kg Content in. 1 KM 1 Aluminium Ingot 208 kg 2 XLPE Compound 80 kg 3 Aluminium-Magnesium-Silicon Alloy-Ingot 68 kg a) Primary unalloyed Aluminium 1.02 kg/kg content in the export prodcut b) Magnesium 1.10 kg/kg content in the export prodcut c) Silicon kg content in the export prodcut 1 KM 1 Aluminium Ingot 383 kg 2 XLPE Compound 133 kg 3 Aluminium-Magnesium-Silicon Alloy-Ingot 93 kg a) Primary unalloyed Aluminium 1.02 kg/kg content in b) Magnesium 1.10 kg/kg content in c) Silicon kg content in 1 No. 1 Brass Strip 1.30 kg/kg content in 2 Nylon 6 Moulding Powder/Granules 1.05 kg/kg content in 1 No. 1 Aluminium Alloy Ingots 1.02 kg/kg content in 2 Brass 1.05 kg/kg content in

392 C1981 C1982 C1983 Silica Refractory Boards for Tundish / Ladle Lining Hydraulic Cylinder for earth moving equipments ERW Steel Pipes / Tubes (Galvanised) ASTM Standard 3 Copper Wire Bar 1.01 kg/kg content in 1 No. 1 Quartzite / Quartz Powder 1250 kg 2 Bonding Adhesive (Resin/Goulac) C kg 3 Filler (Boric Acid or Borax, Paper / Glass Fiber, Glass and Mineral Wool) 62.5 kg 4 Wooden Moulds 0.07 Nos. 1 No. 1 Seal Dust. Net to net 2 Packing Rod Net to net 3 Bushing Net to net 4 O-Rring Net to net 5 Ring, Back Up Net to net 6 Ring Piston Net to net 7 Ring Wear Net to net 8 Seal Dust Net to net 9 Nylon Nut Net to net 10 Nut Net to net 11 Bolt Net to net 12 Washer Net to net 13 Non alloy cold drawn seamless steel tube of relevant grade 1.1 Mtr./Mtr. Content in 14 ERW Steel Tube 1.01 Mtr./Mtr. Content in export product 1 kg 1 Hot rolled Carbon steel sheets / strips / plates / coils other than high carbon steel kgs. 2 Zinc (In kgs) As per Engg. Table No. 11. Note : While the quantity of item No. 1 will remain the same for all thickness of the products, the quantity of item 2 will be as per the Engg. Table No. 11. C1984 ERW Steel Pipes/ Tubes (Galvanised) other than ASTM Standards 1 kg 1 Hot rolled Carbon steel sheets/ strips/ plates / coils other than high carbon steel kgs 2 Zinc (in kgs) As per Engg. Table No. 11. Note : While the quantity of item No. 1 will remain the same for all thickness of the products, the quantity of item 2 will be as per the Engg. Table No. 11. C1985 Deleted C1986 Reducing Bushings of mild steel for rigid/imc conduit 2 Zinc (If is galvanised) 1 kg 1 Mild Steel Round Bars As per Table given in the foot Note. Note : The quantity of import of Mild Steel Round Bars to be allowed as under :- S. NO Size of Raw material in Kg to be allowed for 1 Kg of (a) (b) (c) 1 ¾"X½"X9/16"L "X½"X5/8"L %of weight of

393 3 1"X¾" X5/8"L ¼"X½"X¾"L ¼"X¾"X¾"L ¼"X1"X¾"L ½"X½"X¾"L ½"X¾"X¾"L ½"X1"X¾ "L ½"X1¼ "X¾"L "X½"X7/8"L "X¾"X7/8"L "X1"X7/8"L "X1¼"X7/8"L "X1½"X7/8"L 3.70 C1987 Online Regulator for LPG Applications C1988 Integrated Regulator for LPG Applications C1989 C1990 C1991 C1992 C1993 C1994 Brass Retrofit Adaptor for LPG Applications Brass OEM Adaptor for LPG Applications Compact Regulator for LPG Applications Screw Type Regulator for LPG Applications Brass Cages for Ball and Roller Bearings Electrolytic Iron Powder (Food grade) having purity of 99.5% and above 1 No. 1 Zinc Ingot 1.10 kg/kg content in 1 No. 1 Zinc Ingot 1.10 kg/kg content in 2 Brass Scrap kg/kg content in 3 Pressure Gauge Net to Net 4 O-Ring Net to Net 5 QCC Type I Connector Net to Net 1 No. 1 Brass Scrap kg/kg content in 2 Pressure Gauge Net to Net 3 O-Ring Net to Net 4 QCC Type I Connector Net to Net 1 No. 1 Brass Scrap kg/kg content in 2 Pressure Gauge Net to Net 3 O-Ring Net to Net 4 QCC Type I Connector Net to Net 1 No. 1 Zinc Ingot 1.10 kg/kg content in 2 Brass Scrap kg/kg content in 3 Pressure Gauge Net to Net 4 O-Ring Net to Net 1 No. 1 Zinc Ingot 1.10 kg/kg content in 2 Brass Scrap kg/kg content in 3 Pressure Gauge Net to Net 4 O-Ring Net to Net 1 kg. 1 Brass Scrap 1.22 kg/kg content in 1 kg 1 M.S. Plate 1.80 kg C393

394 C1995 Refrigerator 1 No. 1 Copper Coated M.S. Tube 1.02 Mtr./ Mtr. content in export product of relevant specification used in export item 1.02 kg/kg content in 2 Relevant refrigerant gas Net to net 3 Cyclopantane/ Solkane 141 B ( R 141 B) Halogenated Derivate of Acyclic Hydrocarbon Dichloro Fluroethane C kgs/kg content in 4 Isocyanate 1.04 kgs/kg content in 5 Polyol 1.04 kgs/kg content in 6 Isobutane 1.04 kg/kg content in 7 CRCA 1.04 kg/kg content in 8 HIP Sheet 1.04 kg/kg content in 9 General Purpose Polystyrene 1.04 kg/kg content in 10 Polypropylene Homo Polymer 1.04 kg/kg content in 11 Polypropylene Copolymer 1.04 kg/kg content in 12 Pre-Coated Steel Sheets 1.04 kg/kg content in 13 Lock Prop 1.04 kg/kg content in 14 Double Tack Tape Net to net 15 Other Relevant component Net to net 16 ABC Moulding Tubing 1.04 kg/kg content in 17 Relevant Copper Tubing 1.01 kg/kg content in 18 Galvanized iron sheet/vinyl coated galvanized iron sheet 19 LDPE/HDPE Moulding Powder / Granules 1.04 kg/kg content in 1.04 kg/kg content in 20 HIP Moulding Powder/granules 1.04 kg/kg content in 21 PVC Moulding Powder/granules 1.04 kg/kg content in 22 Relevant S.S. Sheets 1.04 kg/kg content in 23 Solder Silver 35% 0.04% of the FOB value 24 Granules - ABS 1.04 kgs/kg content in 25 Powder Paint such as Vinyl coated metal - Metlon/ Vinyl coated metal - Regular 1.04 kgs/kg content in 26 Lubricating Oil Net to Net basis

395 C1996 C1997 C1998 C1999 C2000 C2001 Air Cooled Fluid Cooler Copper Circle (in sheet form) Chairs Modular Work Station Stainless Steel Travelling Guard Platinum Ingots Min Purity 99.95% Palladium Ingots Min Purity 99.95% Gold Ingots Min Purity 99.5% Silver Ingots Min Purity 99.9% Rhodium Powder Min Purity 99.5% Iridium Powder Min Purity 99.5% Ruthenium Powder Min Purity 99.5% 1 No. 1 Seamless Copper Tube 1.01 kg/kg content in 2 Heresite Coating 2% of FOB value 1 kg 1 Copper Cathode 1.03 kg 1 No. 1 Polyol 0.63 kg of the weight of the Foam 2 Isocyanate 0.42 kg of the weight of the Foam 3 Relevant Fabric/Leather cloth 1.10 Sq.m/Sq.m content 4 CRCA Mild Steel Sheets 1.05 kg/kg content in 5 Gas Spring Net to net 6 Chair Mechanism Net to net 7 Caster Net to net 1 No. 1 Relevant Pre laminated/ Plain particle Board 1.05 Sq.m/Sq.m content in export product 2 CRCA Mild Steel Sheet 1.05 kg/kg content in 3 Relevant Aluminium Alloy Ingot Relevant Aluminium Alloy Sections 4 PVC Plastic Sheet (8mm to 25mm wide) 1 kg 1 Cold Rolled Stainless Steel Sheet Coil of relevant grade 1 kg 1 Precious metal Ores & Concentrates containing any one or more precious metals viz. Platinum, Palladium, Gold, Silver, Rhodium, Iridium, Ruthenium, Osmium. 2 Waste and Scrap of precious metal or metal clad with precious metal; other waste and Scrap containing precious metal or precious metal compounds of a kind used principally for the recovery of any one or more precious metals viz. Platinum, Palladium, Gold, Silver, Rhodium, Iridium, Ruthenium, Osmium kgs/kg content in 1.01 kgs/kg content in 1.02 Metre/Metre content in export product 1.05 kg 1.02 kg/kg content of precious metal in 1.02 kg/kg content of precious metal in Osmium Powder Min Purity 99.5%. Note : Each of the precious metal contained in the above input material as declared in the import C395

396 documents is to be accounted for in. C2002 C2003 Expansion Fasteners made of Non Alloy Steel Hot rolled Non-alloy Steel (Pickled/ Un-pickled) Plates/ Sheets/ Strips/ Wide Coil 1 kg 1 Non Alloy Steel Round Bar 1.10 kg/kg content in 2 Non Alloy Steel Sheet 1.47 kg/kg content in 1 MT 1 Non-alloy Steel melting Scrap, 1150 kg Pig Iron/Hot Metal, Sponge Iron including Hot Briquetted Iron (HBI) 2 Low Silica Lime Stone 76 kg 3 a) Bulk Ferro Alloys (Ferro Silicon/ Ferro Manganese/ Silicon Manganese) b) Special Ferroalloys/ metals (Ferro Chrome/ Ferro Vanadium/ Ferro Niobium/ Nickel Oxide Sinter/ Ferro Nickel/ Ferro Aluminium/ Ferro Titanium/ Ferro Boron/ Ferro Phosphorous/ Magnesium Metal/ Ferro Molybdenum) 4 Additives: a) Aluminium wires/ scraps/ shots/ ingots and/ or Aluminium Powder in Cored wire. b) CaSi/ café Lumps, CaFeAL/ cafe/ CaSi Powder in Cored wire c) Met coke/ Raw Pet. Coke/ Coke/ Calcined Pet Coke 5 Consumables/ Misc. C kg 2.6 kg 3.0 kg 0.5 kg 4 kg a) Rolls for caster and rolling mill 0.5 kg b) Copper mould for casting 0.02 kg c) Casting Powder 1 kg d) Rolling Mill Oil/ Hydraulic Oil/ 3 kg Lubricating Oil e) Celox Inserts/ Oxygn Probes/ 0.10 kg Sampler Probes f) Shear Blades/ Saw Blades 0.01 kg g) Oxygen Lance Pipes 0.12 kg h) Temperature Tips/ Sampler Tips/ 0.20 kg Thermodynamic elements I) Graphite Electrodes 2.4 kg 6 Refractories: a) Shaped Refractories (Fired/ Unfired Bricks/ Shapes) b) Monolithic Refractories (including Castables, ramming mass/ gunning mixes) c) Special Refractories i.e. C.C. refractory (Shrouds, Mono Block Stopper, SE Nozzles), Slide Gate refractory, Porous Plug, Zircon/ Zirconia Nozzles & Tundish Nozzles 7 Energy Sources: 3 kg 6 kg 1 kg

397 a) LPG (for Supersonic Oxygen lance in EAF) b) LDO (or preheating of ladle and 20 kg heating of thin slab in tunnel furnace) c) Natural Gas/ LNG (for Tundish 0.25 SCM & SEN heating) Note: 1. This norm is applicable for manufactured through Electric Arc. Furnace (CONARC process) - Thin Slab Caster - Hot Strip Mill. Note: 2. Quantity of Pig Iron/ Hot Metal and Sponge Iron/ HBI allowed against S. No. 1 shall not exceed 60% and 35% respectively of the total quantity permitted therein. Note: 3. Import of Silico manganese allowed at S. No. 3 (a) shall not exceed 60% of the total quantity of import. Note: 4. Special Ferro Alloy (s)/metal against S. No. 2 (b) will be allowed only if the respective alloying elements (s)/ metal is/ are actually present in. C2004 Black Pipe 1 MT 1 Hot rolled carbon steel strips/ 1.05 MT coils/ plates other than high carbon steel C2005 Precision Steel Tubes 1 MT 1 Cold rolled carbon steel strips/ 1.05 MT coils/ plates other than high carbon steel C2006 C2007 C2008 Trumpet Horns Rubber Bonded Grinding Wheel Mass Transfer Equipment / Column Internals 1 No. 1 CRCA Steel Strip 0.6 x 12 Spring 2 CRCA Steel Strip 0.18 x 0.9 Membrane/ Diapharagm 3 Alu-Zinc Steel Strip 1.25 x Housing 4 Super Enameled Copper Wire/Copper Wire 5 ABS Black Trumpet C397 4 kg 1.07 kg/kg content in Net to Net 1.20 kg/kg content in Net to Net 1.22 kg/kg content in Net to Net 1 kg/kg content in the 1.05 kg/kg content in Net to Net 6 Glue 1% of FOB value of export 7 Other relevant components As per General Note No. 4 for Engg. Product. 1 No. 1 Aluminium Oxide Synthetic, Silicon Carbide, Depolymerised 1.07 kg/kg content in 1 kg 1 Relevant Stainless Steel Sheets / 1.08 kg/kg Content plates 2 Relevant Stainless Steel Pipes / Tubes 1.05 kg/kg Content 3 Relevant Fasteners Net to Net basis C2009 Carbide Heading Dies 1 No. 1 Carbide Inserts 1 No. (net to net) C2010 Ferro Titanium (Lumps/ 1 Tone 1 Titanium Scrap (containing kg Granules/Powders) 95% Ti) 2 Ferro Silicon (70-75% Si) 25 kg C2011 Nickel Cadmium Pocket Plate Batteries in 3 Steel Melting Scrap 190 kg 1 No. 1 Nickel Hydroxide Powder (45-65% Nickel + Cobalt) 1.02 kg/kg content in

398 C2012 C2013 C2014 C2015 Polypropylene Containers with Spares and standard accessories Tin Powder Silicon Carbide Briquettes containing 90% Silicon Carbide Crude Wheels for Agricultural and Forestry Equipment such as Tractors, Backhoc Loaders, Lagskidders and Skid Steers (weight range 21 Kgs to 59 Kgs) Bars and Rods of Exhaust Valve Steel in ground finished condition C2017 Hub Shell (Weight No. 1 Non Alloy Steel Round of relevant grade C398 Hydrated Nickel Sulphate Nickel Anode 2 Cadmium Hydroxide a) Cadmium Oxide (87.25% Cadmium) b) Graphite Flakes (99.62% Carbon Min.) 3 C.R. Steel Strips/Perforated Steel Strips (0.08 to 0.1 mm thick) 4 Lithium Hydroxide (Monohydrated / Solid) Net to Net basis Net to Net basis 1.02 kg/kg content in 1.02 kg/kg content in 1.02 kg/kg content in 1.05 kg/kg content in 1.02 kg/kg content in 5 Potassium Hydroxide 1.02 kg/kg content in 6 Polypropylene Granules 1.05 kg/kg content in 1 kg 1 Tin ingots Tin Scrap 1 kg 1 Silicon Carbide Crude kg 1 No. 1 HR Plates/ HR Wide Coils (thickness greater than and equal to 5 mm) of relevant grade of steel 2 HR Sheets/ HR wide Coils (thickness less than 5 mm) of relevant grade of steel 1.01 kg/kg content in 1.03 kg/kg content in 1.20 Kgs/Kg content in 1.09 Kgs/Kg content in 3 Paint & Thinner 3% of FOB value 4 Welding Wire/ Flux 3% of weight of Steel to be welded 1000 kg 1 Non-alloy Steel Melting Scrap 735 kgs 2 Ferro Alloys comprising of Low Carbon (C:0.10% max.) Ferro Chrome/ Low Phosphorus (P:0.10% max.) Ferro Manganese 642 kgs a) Low Carbon (C:0.10% max.) Ferro Chrome 468 kgs b) Low Phosphorus (P:0.10% max.) 130 kgs Ferro Manganese/ Manganese Metal / Manganese Nitride 3 Unwrought Nickel 58 kgs Note: In case "Alloy Steel Scrap" is used in place of "Non Alloy Steel Scrap" as at Sr. No. 1, quantities of items at Sr. No. 2/2 (a), 2 (b) and Sr. No. 3 shall be reduced proportionately depending upon the content of "Chromium/ Manganese/ Nickel in the Alloy steel Scrap. C2016 Non Alloy Steel Wire Woven Mesh 1 kg 1 High Tensile Non Alloy Steel Wire of relevant grade & Dia kg 660 gms

399 C2018 C2019 gms) (Bicycle part) Stainless Steel Wire Mesh/ Netting Stainless Steel Wire Braid C2020 Jar Sealer (Weight 200 gms for import item No. 1, 155 gms for import item No. 2 & 156 gms for import item No. 3 C2021 C2022 C2023 C2024 Tubular Aluminium Alloy Knitting Pins / Needles Complex Shaped Metal Components manufactured through Metal Injection Molding Stainless Steel Screens for Filtration / Separation "52" Decorative Ceiling Fans with 5 wooden blades and 4 lamps (weight 11 kgs) 1 MT 1 SS Wire of relevant grade and diameter SS Wire Rod of relevant Grade 1 MT 1 SS Wire of relevant grade and Diameter SS Wire Rod of relevant grade 1 No. (weight 511 gms) 1 Non-Alloy Steel Sheet 250 gms 2 Bakelite Powder / Granules 162 gms 3 Non-Alloy Steel Rod 200 gms 1000 Nos 1 Relevant Aluminium Alloy Tube in Coil Form Relevant Aluminium Alloy Tube in cut length 1.0 kg 1 Metal Powders: 1.02 MT/MT content in 1.05 MT/MT content in 1.04 MT/MT content in 1.07 MT/MT content in 1.01 kg/kg content in Net to net a) carbonyl Iron Powder 1.05 kg/kg content in b) SS Metal Powder 1.05 kg/kg content in c) Nickel Powder 1.05 kg/kg content in d) Other Relevant Metal Powder 1.05 kg/kg content in 2 Binders: a) Polypropelene Upto 2% of FOB value of exports b) Paraffin Wax -do- c) Krayton Flake -do- d) Stearic Acid -do- 1.0 kg 1 Stainless Steel Wire Stainless Steel Rod 2 Stainless Steel Rings Net to net 1.02 kg/kg content in 1.05 kg/kg content in 1 No. 1 Speed Control Pull Chain Switch Net to net 2 Pull Chain Switch for lighting Net to net 3 Pressure type wire connector Net to net 4 Side Switch (Plastic case) Net to net 5 Ceiling Fan Wooden Blades Net to net 6 Blade Shank Net to net 7 Lamp Holder Net to net 8 Pull Chain for Switch Net to net 9 Ball Bearing Net to net C399

400 10 capacitor Net to net 11 CC Copper Rod kg 12 CRNGO Steel Sheet 2.61 kg 13 EC Gr. Aluminium for Rotor kg C2025 I.C. Engine 3 H.P H.P C2026 I.C. Engine above 28 H.P H.P C2027 I.C. Engine above 720 H.P 14 Kraft Paper As per packing Policy 15 CRCA Sheet EDD Gr. For top and bottom cover C kg 16 Glass Sleeve 1.5 mm 204 mm dia 3 mm 204 mm dia 8 mm 102 mm dia 1 No. 1 Finished Components Net to net 2 Unfinished Forgings Net to net (in numbers) 3 Unfinished Castings Net to net (in numbers) 4 Non Alloy Steel 1.47 kg/kg content in 5 Pig Iron a) For casting wt. Above 10 kg.& upto 100 kg kg/kg content in b) For casting wt. Above 100 kg 1.20 kg/kg content in 6 Consumables 4% FOB value of 7 HS Diesel As per the general note for fuel under Sl. No. 8 1 No. 1 Finished Components Net to net 2 Unfinished Forgings Net to net (in numbers) 3 Unfinished Castings Net to net (in numbers) 4 Non Alloy Steel 1.47 kg/kg content in 5 Pig Iron a) For casting wt. Above 10 kg & upto 100 kg 1.25 kg/kg content in the export prodcut b) For casting wt. Above 100 kg 1.20 Kg/kg content in 6 Consumables 4% FOB value of 7 HS Diesel As per the general note for fuel under Sl. No. 8 1 No. 1 Finished Components Net to net 2 Unfinished Forgings Net to net (in numbers) 3 Unfinished Castings Net to net (in numbers) 4 Non Alloy Steel 1.47 kg/kg content in 5 Pig Iron a) For casting wt. Above 10 kg & 1.25 kg/kg content in

401 C2028 Genset from 3 KVA upto & including 20 KVA C2029 Genset from above 20 KVA upto & including 600 KVA C2030 Genset above 600 KVA upto 100 kg. the export prodcut b) For casting wt. Above 100 kg kg/kg content in 6 Consumables 4% FOB value export prodcut 7 HS Diesel As per the general note for Fuel under Sl.No No. 1 Finished Components Net to net 2 Unfinished Forgings Net to net (in numbers) 3 Unfinished Castings Net to net (in numbers) 4 Non Alloy Steel 1.47 kg/kg content in the export prodcut 5 Pig Iron a) For casting wt. Above 10 kg & upto 100 kg kg/kg content in b) For casting wt. Above 100 kg kg/kg content in the export prodcut 6 Consumables 4% FOB value of export prodcut 7 HS Diesel As per the general note for Fuel under Sl. No No. 1 Finished Components Net to net 2 Unfinished Forgings Net to net (in numbers) 3 Unfinished Castingsd Net to net (in numbers) 4 Non Alloy Steel 1.47 kg/kg content in 5 Pig Iron a) For casting wt. Above 10 kg & upto 100 kg kg/kg content in b) For casting wt. Above 100 kg kg/kg content in 6 Consumables 4% FOB value of 7 HS Diesel As per the general note for Fuel under Sl. No No. 1 Finished Components Net to net 2 Unfinished Forgings Net to net (in numbers) 3 Unfinished Castings Net to net (in numbers) 4 Non alloy Steel 1.47 kg/kg content in 5 Pig Iron a) For casting wt. Above 10 kg & upto 100 kg kg/kg content in the export prodcut b) For casting wt. Above 100 kg kg/kg content in 6 Consumables 4% FOB value of C401

402 C2031 Pump set from 3 H.P. upto & including 28 H.P. C2032 A.C. Generator 0 to 625 KVA C2033 Stainless Steel Minted Coins/Coin Blanks C2034 Cold Rolled Zinc (43.5%) & Aluminium - Silicon (56.5%) alloy coated Non-alloy Steel Sheets / Strips / Wide Coils with / without Resin coating. C402 7 HS Diesel As per the general note for Fuel under Sl. No No. 1 Finished Components Net to net 2 Unfinished Forgings Net to net (in numbers) 3 Unfinished Castings Net to net (in numbers) 4 Non alloy Steel 1.47 kg/kg content in 5 Pig Iron a) For casting wt. Above 10 kg & upto 100 kg kg/kg content in the export prodcut b) For casting wt. Above 100 kg kg/kg content in 6 Consumables 4% FOB value of 7 HS Diesel As per the general note for Fuel under Sl. No No. 1 CRNGO Sheets 1.37 kg/kg content in 2 Copper Rods 1.01 kg/kg content in 3 Aluminium Ingots Grade LM kg/kg content in 4 EN-8 Steel Bar 1.20 kg/kg content in 5 Ball / Roller / Sleeve Bearings Net to net 6 Insulation Material 1.05 kg/kg content in 7 Automatic Voltage Regulator (AVR) Net to net 8 Single Core Copper Insulated Cable Class - H 1 kg 1 Cold Rolled Wide Coils/Strips (as-rolled/annealed/annealed & pickled) of relevant grade of Stainless Steel Hot Rolled Wide Coils/Strips (pickled/un-pickled) of relevant grade of Stainless Steel Slab of relevant grade of stainless Steel 1000 kgs 1 Hot Rolled Non-Alloy Steel Strips /Wide Coils 1.02 Metre/Metre content in export product 1.22 kgs 1.29 kgs 1.33 kgs kgs./1 kg. CR steel content in.* 2 Zinc Slab / Ingots x Mass of Zn- Al-Si Alloy as per Engineering Table X (New additional Table No. to be allotted) 3 Aluminium-Silicon Alloy Slab / x Mass of Zn-

403 C403 Ingots 4 Resin (permitted against export of Resin coated products only) 5 Rolling Mill Rolls 1.25 Kgs 6 Rolling Mill Oil 0.35 Kg 7 Picking Oil 0.45 Kg Al-Si Alloy as per Engineering Table X (New additional Table No. to be allotted). As per Engineering Table XX (New additional Table No. to be allotted). 8 Steel Strapping for Packing As per Packing Policy. 9 Galvanished Plain Sheets for packing As per Packing Policy. Note: The following formula shall be adopted to work out the quantity of CR Steel content in export: CR Steel content = (Mass of ) - (Mass of Zn-Si alloy as per Table/1.05) - (Mass of Resin as per Table/1.015, if resin coated). C2035 C2036 C2037 C2038 Self Supporting Aerial Telephone Cable of relevant size (pairs) having Copper Conductor 0.4 mm dia Self Supporting Aerial Telephone Cable of relevant size (pairs) having Copper Conductor 0.5 mm dia Self Supporting Aerial Telephone Cable of relevant size (pairs) having Copper Conductor 0.65 mm dia Heavy weight drill pipes 3-1/2" OD to 6-5/8" OD, length 9.45 Meters to 9.76 Meters (31 feet to 32 feet) having coating thickness of 5-9 mil (125 to 225 microns) of phenolic/epoxy/modified urethane/ epoxy powder C2039 Silicon metal 99% minimum C2040 Resistance Welding Products namely, Spot Welding Electrodes Cap/Tip C2041 Resistance Welding Products namely, 1 km As per Engineering Table No. 9 (6) 1 km As per Engineering Table No. 9 (7) 1 km As per Engineering Table No. 9 (8) 1 No. 1 Plain and seamless pipe of relevant diameter-4" to 7-1/4" OD (1/2" more dia than finished HWDP) meters 2 Relevant steel bar stock meters 3 Relevant Coating material Gallons 4 Hard banding material such as tungsten carbide, Armcor M, Arnco XT series, Smooth X, 2.73 kg 5 Threading inserts 0.20 Sets 1 MT 1 Silicon metal 94-96% puirity 1.05 MT 1 kg 1 Relevant Rod of Copper, Chromium Copper, Chromium Zirconium Copper, Nickel Silicon Chromium Copper, Beryllium Copper & Silver Copper. 1 kg 1 Relevant Plate of Copper, Chromium Copper, Chromium Zirconium Copper, Nickel 1.02 kg/kg content in kg/kg content in.

404 C2042 C2043 C2044 Projection Welding Electrodes/Dies Resistance Welding Products namely, Seam Welding Electrodes/Wheels/Discs Resistance Welding Products namely, Flash Welding Electrodes/Dies/Jaws Resistance Welding Products namely, Mould Plates, Made of Copper, Chromium Copper, Chromium Zirconium Copper Nickel Silicon Chromium Copper, Beryllium Copper & Silver Copper. Silicon Chromium Copper, Beryllium Copper & Silver Copper. 1 kg 1 Relevant Billet of Copper, Chromium Copper, Chromium Zirconium Copper, Nickel Silicon Chromium Copper, Beryllium Copper & Silver Copper. 1 kg 1 Relevant Billet of Copper, Chromium Copper, Chromium Zirconium Copper, Nickel Silicon Chromium Copper, Beryllium Copper & Silver Copper. 1 kg 1 Relevant Plate of Copper, Chromium Copper, Chromium Zirconium Copper, Nickel Silicon Chromium Copper, Beryllium Copper & Silver Copper kg/kg content in kg/kg content in kg/kg content in. C2045 Contact tape (Tinned) 1 kg 1 Brush Alloy (Untinned) kg/kg content in. C404