WPLQE. WPLQE Economy Line. The right angle planetary gearbox with universal output flange flexible installation options and for high forces

Transcription

1 Economy Line The right angle planetary gearbox with universal output flange flexible installation options and for high forces The is our right angle gearbox with the square output flange. This makes it particularly easy to install for a wide range of applications, and its large tapered roller bearings also make it ideal for high radial and axial forces. 50

2 Economy Line Square output flange The can be bolted directly to the machine without the need for additional intermediate flanges. The output flange with through holes safeguard the ease, reliability, and full accessibility of the installation. Optimized ball bearings Install your drive elements directly on the output shaft at the this saves time and money without compromising performance. Thanks to its large tapered roller bearings at the output, this right angle gearbox can also absorb large radial and axial forces. Highest installation flexibility You will get the most out of your gearbox: The has lifetime lubrication and can be installed virtually anywhere for maximum flexibility. Individual adaptation of the input flange to the motor Lifetime lubrication for maintenance-free operation Equidirectional rotation Wide range of output shaft designs Precise gearing Wide range of ratios i = to i = 5 5

3 Technical data Code Gearbox characteristics z () Service life 0,000 t L h Service life at T N x , Efficiency at full load () η % Min. operating temperature T min C -5 (-) Max. operating temperature T max ( F) 90 (94) Protection class IP 54 S Standard lubrication Grease F Food grade lubrication Grease L Low temperature lubrication () Grease Installation position Any < 6 < < S Standard backlash j t arcmin < 8 < 5 < < < 7 < (4-9) (4-56) (89-0) /arcmin Torsional stiffness () c g (lb f.in/ (5-9) (45-56) (97-0) arcmin).6 -. (4-9) (4-56) (9-0).9 (4.) 5.5 (.).6 (7.8) kg Gearbox weight m G (lb m ). (4.6) 6. (.5) 4.6 (.). (5.) 6.6 (4.6) 6.6 (6.6) S Standard surface Housing: Steel nitrocarburized and post-oxidized (black) Running noise (4) Q g db(a) Max. bending moment based M on the gearbox input flange (5) b 5 (44) 0.5 (9) 6 (0) Motor flange precision DIN 4955-N Output shaft loads z () Radial force for 0,000 h (6)(7) F r h 900 (0) 050 (46) 950 (664) Axial force for 0,000 h (6)(7) F a h 000 (5) 500 (56) 500 (56) Radial force for 0,000 h (6)(7) Axial force for 0,000 h (6)(7) F r h F a h N (lb f ) 700 (58) 800 (80) 700 (8) 000 (450) 400 (540) 00 (47) Static radial force (7)(8) F r Stat 500 (8) 500 (56) 4000 (900) Static axial force (7)(8) F a Stat 950 (49) 800 (855) 800 (855) Tilting moment for 0,000 h (6)(8) M K h 7 (7) 0 (894) (05) Tilting moment for 0,000 h (6)(8) M K h 9 (57) 84 (74) 88 (664) Moment of inertia z () ( ) (8. -.6) ( ) Mass moment of inertia () J kgcm² (lb f.in.s 0-4 ) ( ) ( ) ( ) ( ) ( ) ( ) () () The ratio-dependent values can be retrieved in Tec Data Finder () T min = -40 C (-40 F). Optimal operating temperature max. 50 C ( F) 5 (4) Sound pressure level from m, measured on input running at n =000 rpm no load; i=5 (5) Max. motor weight* in kg = 0. x M b / motor length in m * with symmetrically distributed motor weight * with horizontal and stationary mounting (6) These values are based on an output shaft speed of n=00 rpm (7) Based on center of output shaft (8) Other (sometimes higher) values following changes to T N, F r, F a, cycle, and service life of bearing. Application specific configuration with NCP

4 Technical data Output torques i () z () Nominal output torque ()(4) T N Max. output torque (4)(6) T max 4 (4) 40 (54) (5) 80 (708) (5) 9 (68) 5 (469) (5) 05 (99) (5) 4 4 () 67 (59) (5) 0 (5) (5) 5 5 () 65 (575) 5 (95) 7 8 (59) 50 (44) 0 (06) 8 5 () 8 (6) 95 (84) 0 44 (89) (5) 0 (5) (5) 0 (859) (5) 9 44 (89) 0 (06) (5) 60 (0) (5) 44 (89) 0 (974) 0 (06) 5 44 (89) 0 (06) 60 (0) 6 44 (89) 0 (06) 60 (0) 0 40 (54) 0 (974) 0 (06) 5 44 (89) 0 (06) 60 (0) 40 (54) 0 (974) 0 (06) 40 8 (59) 50 (44) 0 (06) (89) 0 (974) 60 (0) (89) 0 (06) 60 (0) (89) 0 (06) 60 (0) (89) 0 (974) 0 (06) 0 44 (89) 0 (06) 60 (0) (54) 0 (974) 0 (06) (89) 0 (06) 60 (0) (54) 0 (974) 0 (06) 0 8 (59) 50 (44) 0 (06) 5 (95) 64 (566) 8 () 0 (66) 85 (75) 68 (487) 4 8 (6) 07 (947) 08 (84) 5 40 (54) 04 (90) 6 (9) 7 9 (57) 80 (708) 9 (699) 8 4 () 6 (540) 5 (45) 0 70 (60) 08 (84) 6 (974) 9 70 (60) 9 (699) 46 (68) 70 (60) 76 (558) 68 (57) 5 70 (60) 9 (699) 46 (68) 6 70 (60) 9 (699) 46 (68) 0 64 (566) 76 (558) 68 (57) 5 70 (60) 9 (699) 46 (68) 64 (566) 76 (558) 68 (57) 40 9 (57) 80 (708) 9 (699) (60) 76 (558) 46 (68) (60) 9 (699) 46 (68) (60) 9 (699) 46 (68) (60) 76 (558) 68 (57) 0 70 (60) 9 (699) 46 (68) (566) 76 (558) 68 (57) (60) 9 (699) 46 (68) (566) 76 (558) 68 (57) 0 9 (57) 80 (708) 9 (699) 5 () Ratios (i=n /n ) () () Application specific configuration with NCP (4) Values for feather key (code A ): for repeated load (5) Different service life: 0,000 h at TN (6) 0,000 rotations of the output shaft permitted; see page 8 5

5 Technical data Output torques i () z () 66 (584) 80 (59) 60 (86) 86 (76) 40 (4) 474 (495) 4 Emergency stop torque () T Stop 80 (708) 0 (947) 500 (445) 5 80 (708) 78 (575) 40 (009) 7 80 (708) 90 (68) 80 (6) 8 70 (60) 70 (505) 40 (806) 0 88 (779) 60 (0) 500 (445) 9 88 (779) 40 (4) 50 (460) 88 (779) 0 (947) 500 (445) 5 88 (779) 40 (4) 50 (460) 6 88 (779) 40 (4) 50 (460) 0 80 (708) 0 (947) 500 (445) 5 88 (779) 40 (4) 50 (460) 80 (708) 0 (947) 500 (445) (708) 90 (68) 80 (6) (779) 0 (947) 50 (460) (779) 40 (4) 50 (460) (779) 40 (4) 50 (460) (779) 0 (947) 500 (445) 0 88 (779) 40 (4) 50 (460) (708) 0 (947) 500 (445) (779) 40 (4) 50 (460) (708) 0 (947) 500 (445) 0 80 (708) 90 (68) 80 (6) 5 Input speeds i () z () 4500 (6) 00 (6) 850 (6) 4500 (6) 50 (6) 950 (6) (6) 50 (6) 050 (6) (6) 500 (6) (6) 500 (6) (6) 50 (6) 950 (6) (6) 750 (6) 050 (6) (6) 500 (6) (6) 450 (6) (6) 500 (6) 0 Average thermal input speed at (6) 5 n T N and S (4)(5) N rpm Max. mechanical input speed (4) n Limit rpm () Ratios (i=n /n ) () () Permitted 000 times (4) Application-specific speed configurations with NCP (5) See page 8 for the definition 54 (6) Average thermal input speed at 50% TN and S

6 D Dimensions D5 D4 D Z D D6 D0 L Q L8 L7 L L4 L5 L6 D6 D H D7 Q B D L L L L0 D G Drawing corresponds to a 080 / -stage / output shaft with feather key / 9 mm clamping system / motor adaptation -part square universal flange / B5 flange type motor All other variants can be retrieved in Tec Data Finder at Geometry () z () Code Pitch circle diameter output D 75 (.95) 00 (.97) 0 (5.8) Mounting bore output D 4x 5.5 (0.7) 6.5 (0.56) 8.5 (0.5) Shaft diameter output D h7 6 (0.60) 0 (0.787) 5 (0.984) Shaft collar output D4 0 (0.787) 5 (.78) 5 (.78) Centering diameter output D5 h7 60 (.6) 80 (.50) 0 (4.) Housing diameter D6 60 (.6) 80 (.50) 5 (4.58) Diagonal dimension output D7 9 (.6) 6 (4.567) 45 (5.709) Flange cross section output Q 70 (.756) 90 (.54) 5 (4.58) Total length L 5 (5.984) 95.5 (7.697) 74.5 (0.807) 64.5 (6.476) (8.86) 0.5 (.909) 77 (6.968) 0.5 (9.075) 0 (.99) Shaft length output L (.60) 40 (.575) 55 (.65) Centering depth output L7 (0.8) (0.8) 4 (0.57) Flange thickness output L8 0 (0.94) 0 (0.94) 5 (0.59) Min. overall height L 9 (.56) 5 (4.58) 46 (5.78) Clamping system diameter input D6 More information on page 7 Motor shaft diameter j6/k6 D0 Max. permis. motor shaft length Min. permis. motor shaft length L0 Centering diameter input D Centering depth input L The dimensions vary with the motor/gearbox flange. The input flange geometries can be retrieved for each Pitch circle diameter input D specific motor in Tec Data Finder at Motor flange length L Diagonal dimension input D Mounting thread x depth G 4x Flange cross section input Q Output shaft with feather key (DIN 6885-) A 5x5x0 A 6x6x8 A 8x7x40 Feather key width (DIN 6885-) B 5 (0.97) 6 (0.6) 8 (0.5) Shaft height including feather key (DIN 6885-) H 8 (0.709).5 (0.886) 8 (.0) Shaft length from shoulder L4 8 (.0) 6 (.47) 50 (.969) Feather key length L5 0 (0.787) 8 (.0) 40 (.575) Distance from shaft end L6 4 (0.57) 4 (0.57) 5 (0.97) Center hole (DIN, type DR) Z M5x.5 M6x6 M0x Smooth output shaft Shaft length from shoulder L4 8 (.0) 6 (.47) 50 (.969) A B () Dimensions in mm (in) () 55