5SJ4...-.HG.. Miniature Circuit Breakers. For worldwide use according to IEC and UL
|
|
|
- Spencer Little
- 7 years ago
- Views:
Transcription
1 BETA Low-Voltage Circuit Protection 5SJ4...-.HG.. Miniature Circuit Breakers For worldwide use according to IEC and UL UL standards are used in North America, but also in several other countries. This is of particular importance to European exporters of electrical switchgear equipment for machines who export to the USA, as their products will only be accepted if they meet the relevant UL standards. A wide range of BETA devices comply with UL standards and are therefore suitable for implementation worldwide in both IEC/EN and UL applications within the framework of their specified use. certified to UL 489 permit use as an all-round solution for protection tasks in distribution boards, control cabinets and control systems to UL 508A as "branch protectors". In particular, they are also approved for the protection of electrical circuits in heating, ventilating and cooling systems (HVAC), as well as for DC applications up to 60 V/125 V in the area of telecommunication applications. The busbar system according to UL 489 enables fast and simple installation in the assembly. Benefits Can be used globally for all applications in residential, non-residential and industrial buildings. This facilitates the planning of plants and enhances export opportunities The devices can be used according to IEC/EN and UL 489, which means these devices can be installed anywhere in the world BETA
2 Miniature Circuit Breakers 5SJ4 miniature circuit according to UL 489 Overview This covers a wide range of protection tasks, in residential and non-residential buildings, as well as in industry. The tripping characteristics B, C and D to EN/IEC have been adapted so that they fall in the permissible tripping range acc. to UL 489, as well as for applications at 25 C and 40 C. This means that the devices are approved for use according to both standards. The enclosure dimensions of the devices correspond to DIN format. This means that all three device series are suitable for universal use worldwide to IEC or UL standards. The key difference between the three device series is their application in different power supply systems. 5SJ4 -.HG40: 240/120 V AC, 1-pole, "same polarity only", 5SJ4 -.HG41: 240 V AC, 1, 2 and 3-pole, 5SJ4 -.HG42: 480Y/277 V AC, 1, 2 and 3-pole. The terminals are suitable for "field wiring". This means that the devices can be installed not only in factory-finished distribution boards and control cabinets, but also on-site in a customer system. 1, 2 and 3-phase busbars in 3 lengths with 6, 12 or 18 pins are available as accessories for all device series. The infeed is over connection terminals, which are available in two versions, for direct infeed at either the busbar or the miniature circuit. Pins that are not required can be covered with touch protection covers. A handle locking device according to UL is also available as a further accessory. Benefits Bus-mounting with direct centered infeed on busbars with a conductor cross-section of up to 50 mm² Infeed direct at miniature circuit breaker for conductor crosssections up to 35 mm² 2 Miniature Circuit Breakers
3 Technical specifications 5SJ4...-.HG40 5SJ4...-.HG41 5SJ4...-.HG42 Standards EN 6898; UL 489; CSA C22.2 No Approved acc. to UL 489; CSA C22.2 No. 5-02, UL File No. E Tripping characteristic B, C, D C, D Operational voltage min. V AC/DC 24 Acc. to IEC max. VDC/pole 60 max. V AC 440 Acc. to UL 489 and CSA C22.2 No max. V AC 240/ Y/277 V DC/1P V DC/2P Rated breaking capacity I cn acc. to IEC ka AC 10 Acc. to UL 489 and CSA C22.2 No ka AC 14/10 1) 14/10 1) 10 1) Insulation coordination Rated insulation voltage V AC /440 Degree of pollution for overvoltage category 3/III Touch protection acc. to EN Yes Handle end position, sealable Yes Degree of protection acc. to EN IP20, with connected conductors CFC and silicone-free Yes Mounting On standard mounting rail Terminals Combined terminals at both ends Yes Terminal tightening torque, only for Cu, 60/75 C Nm 3.5 lb/in 31 Conductor cross-sections Solid and stranded, top and bottom terminal, acc. to UL 489 and CSA C22.2 No AWG AWG conductors, solid and stranded acc. to IEC mm Mains connection Any Mounting position Any Average service life, with rated load actuations Ambient temperature C , occasionally +55, max. 95 % humidity, storage temperature: Resistance to climate acc. to IEC cycles Resistance to vibrations acc. to IEC m/s 2 60 at Hz 1) For detailed information on rated switching capacity, see page 10. Busbars 5ST ST ST ST ST3 665 Standards UL 489 Approved acc. to UL 489; UL File Nr. E Operational voltage Acc. to IEC V AC 690 Acc. to UL 489 V AC 480Y/277 and 240 Rated conditional short-circuit current ka 15 ka with NH3 355A gl/gg 500 V Dielectric strength kv/mm 30 Surge strength kv >9.5 Rated current at 40 C ambient temperature A 115 Insulation coordination Degree of pollution 2 Overvoltage category III Busbar cross-section mm² Cu 16 Infeed Any Conductor cross-sections AWG mm² Terminals terminal tightening torque Nm lb/in Temperature resistance C 200 UL94-V0/0.4 mm Miniature Circuit Breakers 3
4 Selection and ordering data (Dated 04/2008) Characteristic B Rated current MW DT Order No. Price I n A Unit(s) Unit(s) kg "same polarity only" 1P, 240 V AC 6 1 B 5SJ HG B 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG Characteristic C Rated current MW DT Order No. Price I n A "same polarity only" 1P, 240 V AC 1) You can order this quantity or a multiple thereof. Characteristic D PG DT Order No. Price Unit(s) Unit(s) kg C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG B 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG B 5SJ HG C 5SJ HG B 5SJ HG C 5SJ HG B 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG B 5SJ HG C 5SJ HG B 5SJ HG C 5SJ HG B 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG B 5SJ HG C 5SJ HG B 5SJ HG C 5SJ HG B 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG Miniature Circuit Breakers
5 1) You can order this quantity or a multiple thereof. Characteristic C Rated current MW DT Order No. Price I n A 1P, 240 V AC Characteristic D PG DT Order No. Price Unit(s) Unit(s) kg C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG P, 240 V AC C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG Miniature Circuit Breakers 5
6 1) You can order this quantity or a multiple thereof. Characteristic C Rated current MW DT Order No. Price I n A 3P, 240 V AC Characteristic D PG DT Order No. Price Unit(s) Unit(s) kg C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG C 5SJ HG P, 480Y/277 V AC N SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG SJ HG Miniature Circuit Breakers
7 Characteristic C Rated current MW DT Order No. Price Characteristic D PG DT Order No. Price I n A 2P, 480Y/277 V AC N SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG SJ HG P, 480Y/277 V AC N SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG42 5SJ HG SJ HG SJ HG42 -- Unit(s) Unit(s) kg 1) You can order this quantity or a multiple thereof. Miniature Circuit Breakers 7
8 Pin spacing Length DT Order No. Price MW mm Unit(s) Unit(s) kg Busbars acc. to UL 489 for use with 5SJ4 -.HG.. fixed lengths, cannot be cut Single-phase For 6 MCB 1P ST HG 012 For 12 MCB 1P ST HG 012 For 18 MCB 1P ST HG 012 Two-phase For 3 MCB 2P ST HG 012 For 6 MCB 2P ST HG 012 For 9 MCB 2P ST HG 012 Three-phase For 2 MCBs 3P ST HG 012 For 4 MCBs 3P ST HG 012 For 6 MCBs 3P ST HG 012 Connection terminals acc. to UL 489 for use only with 5SJ4 -.HG.. Infeed - MCBs 35 mm² 5ST HG 012 Infeed - busbars 50 mm² 5ST HG 012 Touch protection covers for busbars acc. to UL pin 5ST HG 012 Handle locking devices acc. to UL 489 To prevent unwanted manual ON/OFF switching, sealable, for padlock with max. 3 mm shackle 5ST Padlocks For 5ST3 801 handle locking device 5ST ) You can order this quantity or a multiple thereof. 8 Miniature Circuit Breakers
9 Dimensional drawings I2_ I2_ , SJ4...-.HG40 5SJ4...-.HG I2_ , SJ4...-.HG I2_ I2_ ST HG 5ST HG 5ST HG 5ST HG 5ST HG 5ST HG 5ST HG 5ST HG 5ST HG 5ST HG I2_14015 I2_ ST HG 5ST HG Schematics 5SJ4 1P 2P 3P Miniature Circuit Breakers 9
10 Configuration Rated switching capacity according to UL 489 Designation Characteristic Current Rated switching capacity (operational voltage 240 V AC) Rated switching capacity (operational voltage 480Y/277 V AC) A ka AC ka AC 5SJ4 -.HG40 B C C D D SJ4 -.HG41 C C D D SJ4 -.HG42 C D D Power loss Rated current Characteristic B Characteristic C Characteristic D I n R i P v R i P v R i P v A mω W mω W mω W Siemens AG Industry Sector Building Technologies Electrical Installation Technology Postfach REGENSBURG GERMANY Subject to change without notice PDF only: (E86060-K8220-E470-A2-7600) PI En / Siemens AG 2008 The information provided in this brochure contains descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. Availability and technical specifications are subject to change without notice. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.
5SV Residual Current Protective Devices
s Siemens AG 2013 SENTRON 5SV Residual Current Protective Devices New portfolio for reliable personnel, material and fire protection Safe protection against residual currents Residual current protective
Uncompromising safety and comfort The next generation of miniature circuit breakers MCB S 200/S 200 M
Uncompromising safety and comfort The next generation of miniature circuit breakers MCB S 200/S 200 M The details make the difference MCB S 200/S 200 M A range designed to ensure efficiency and protection
Application Switchgear for industrial and commercial applications. U e V AC 230/400. 48 (per pole)
Overcurrentswitch,6A,2p,D-Char,AC Partno. FAZ-D6/2 Articleno. 278777 CatalogNo. FAZ-D6/2 Similar to illustration Deliveryprogramme Basic function Miniature circuit breakers Pole 2 pole Tripping characteristic
Mini Circuit Breakers, Fuse Blocks, and Electronic Circuit Protection
Technical Data Mini Circuit Breakers, Fuse Blocks, and Electronic Circuit Protection Topic Page 1489-M Miniature Circuit Breakers 2 1492-SP Supplementary Protectors 15 1492-D Circuit Breakers 27 188 Regional
Residual Current Protective Devices
Residual Current Protective Devices /2 Introduction / 5SM3 RCCBs /9 SIQUENCE, 5SM3 and 5SU1 universal -sensitive RCCBs, type B and type B+ /12 Additional components /1 5SM2 RC units /18 5SU1 RCBOs /25
Switching Devices. 8/2 Introduction. 8/5 5TE8 control switches. 8/8 5TE4 pushbuttons. 8/11 5TE5 light indicators. 8/13 5TE On/Off switches
Siemens AG 2014 Switching Devices /2 Introduction /5 5TE control switches / 5TE4 pushbuttons /11 5TE5 light indicators /13 5TE On/Off switches /20 5TE DC isolators /22 5ST busbars for modular installation
RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters
Characteristics multifunction voltage control relay RM35-U - range 15..600 V Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main
The complete range of consumer switchboards and switchgear
Power Distribution The complete range of consumer switchboards and switchgear www.nhp.com.au/mod6 The MOD6 range of consumer switchboards and switchgear is specifically designed for domestic and commercial
BETA Protecting SITOR Semiconductor Fuses
BETA Protecting SITOR Semiconductor Fuses /2 Product overview /3 /17 SITOR, cylindrical fuse design /22 SILIZED, NEOZED and DIAZED design Siemens ET B1 /2008 Product overview Overview Devices Page Field
RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC
Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage
Electronic overload relay EF19 and EF45
Data sheet Electronic overload relay EF19 and EF45 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor
System pro M compact Miniature Circuit Breaker S 200/S 200 M
Data Sheet System pro M compact Miniature Circuit Breaker S 200/S 200 M 2CDC021023S0012 2CDC021038S0012 The miniature circuit breakers of the System pro M compact series S 200 and S 200 M provide state-of-the-art
Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.
Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description
BETA Switching. Switching Devices. 5TT5 8 Insta contactors, AC technology. Overview
BETA Switching Siemens AG 200 5TT5 Insta contactors, AC technology Overview The 5TT5 Insta contactors are equipped with an AC magnetic system and are ideal for use under harsh conditions. The auxiliary
Series 8146/5-V37 and Series 8150/5-V37
www.stahl.de > Clear assignment safe technology easy installation > Intelligent structure only one rotary actuator for frequency-controlled drives ) 20 ms leading auxiliary contact for safe motor disconnection
R.C.C.B. s two-pole LEXIC
87045 LIMOGES Cedex Telephone : (+33) 05 55 06 87 87 Fax : (+ 33) 05 55 06 88 88 R.C.C.B. s two-pole LEXIC 089 06/09/10/11/12/15/16/17/18/ 27/28/29/30/35, CONTENTS PAGES 1. Electrical and mechanical characteristics...
48 SERIES Relay interface modules 10 A
48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according
DEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050
Extract from the online catalog DEK-REL- 24/1/SEN Order No.: 2964050 Relay terminal block for sensor, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage
Electronic overload relay EF65, EF96 and EF146
Data sheet Electronic overload relay EF65, EF96 and EF146 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays.
0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
Molded Case Circuit Breaker Specifications Bulletin Number 140U-D
Technical Data Molded Case Circuit Breaker Specifications Bulletin Number 140U-D Topic Page Product Line Overview 2 Specifications 3 Trip Curves 4 Approximate Dimensions 6 Additional Resources These documents
AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101403D0201 24/03/11 AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF09(Z) contactors are used for controlling power circuits
How can a charging station for electric vehicles be set up simply and safely?
SB18 Building > Electromobility > Charging Station Design How can a charging station for electric vehicles be set up simply and safely? Requirement In order to supply electric vehicles with electric power,
RM4TG20 three-phase network control relay RM4-T - range 200..500 V
Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking
Type: EASY719 DC RC Article No.: 274119. Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC. Description
Type: EASY719 DC RC Article.: 274119 Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC Description 12 digital inputs (4 inputs available as analog inputs) 6 relay outputs LCD display
Feed-through terminal block - SSK 110 KER-EX - 0502058
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101433D0201 28/03/11 NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits.
Relés e Contatores de Estado Sólido SIRIUS
Relés e Contatores de Estado Sólido SIRIUS Coletânea de dados técnicos ( product data sheet ) Agosto/212 SSR - 3RF21 22,5 mm Ponto Zero SSR - 3RF2 45 mm Ponto Zero SSR - 3RF22 45 mm Ponto Zero Trifásico
Technicaldata General
Currenttransformer-operatedoverloadrelay,60-90A,1N/O+1N/C Partno. ZW7-90 Articleno. 002618 CatalogNo. XTOT090C3S Deliveryprogramme Product range ZW7 current transformer-operated overload relays Description
TX OPEN RS232/485 module
s 8 185 8185P01 TX-I/O ; DESIGO OPEN TX OPEN RS/485 module for integrating third-party systems and devices to DESIGO (V4 or higher) TXI1.OPEN Platform to integrate third-party systems and devices to the
Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection)
Data sheet Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection) The temperature monitoring relays CM-TCS monitor overtemperature,
Plug and Socket Devices CES 63 A Series 8579
www.stahl.de > Switch socket / plug 63 A > Large switch handle with clear switch position indication padlockable in 0- and I-position > Low insertion and withdrawal forces through individually encapsulated
Three-phase monitoring relay CM-PFE
Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical
Emergency stop As an emergency switching off/emergency stop device. Standards According to IEC/EN 60204-1, VDE 0113 Part 1
MainswitchSurfacemounting Partno. P3-63/I4/SVB Articleno. 207343 CatalogNo. SP3-063-I4CRQ IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual
Type: DILM32 10(24V50HZ) Article No.: 277247
Type: DILM32 10(24V50HZ) Article No.: 277247 Ordering information Rated operational current AC 3 400 V I e A 32 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors,
Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only
Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet
Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order
Type: DILM50(230V50HZ,240V60HZ) Article No.: 277830
Type: DILM50(230V50HZ,240V60HZ) Article No.: 277830 Ordering information Rated operational current AC 3 400 V I e A 50 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase
Bimetallic Overload Relay Specifications
Technical Data Bimetallic Overload Relay Specifications Bulletin Number 193K, 193T1 Topic Page Product Overview 2 Standards compliance and Certifications 2 General Specifications 193K 3 Approximate Dimensions
Manual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical devices for motor and circuit protection. These devices offer local motor disconnect means, manual ON/ OFF control, and
Redundancy Module QUINT-DIODE/40
Redundancy Module QUT DIODE provides: 00% decoupling of power supplies connected in parallel Can be installed in potentially explosive areas Load currents up to 60 A supported Easy assembly by snapping
W DATA SHEET: RESIDUAL CURRENT CIRCUIT BREAKER 25-100A, SERIES BCF0 AND BCF6
W DATA SHEET: RESIDUAL CURRENT CIRCUIT BREAKER 25-100A, SERIES BCF0 AND BCF6 W SCHRACK-INFO Any mains connection If using 4-pole. switches with 3 or 2-poles, ensure connection acc. to assembly instructions
49 Series - Relay interface modules 8-10 - 16 A. Features
Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole
Current valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw
4 937 DESIO Current valve for AC 24 V pulse/pause control of electrical loads up to 30 kw SEA45.1 Use The current valve is used for the control of electric heating elements in heating, ventilation and
ABB i-bus KNX Fan Coil Actuator, MDRC FCA/S 1.1M, 2CDG 110 084 R0011
, 2CDG 110 084 R0011 2CDC 071 112 F0008 The Fan Coil Actuator is a modular installation device (MDRC) in pro M design. It is intended for installation in the distribution board on 35 mm mounting rails.
Analog signal converters CC-E I/I Current / current isolators
ata sheet Analog signal converters CC-E I/I Current / current isolators The CC-E I/I is an isolator for the electrical isolation of current signals without auxiliary supply. It allows the isolation between
38 SERIES. Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
3RT1015-1BB41 CONTACTOR, AC-3 3 KW/400 V,
Automation Technology > Industrial Controls > Switching Devices > Contactors and Contactor Assemblies > Power Contactors for Switching Motors > Contactors SIRIUS 3RT10, 3-pole, 3... 250 kw 3RT1015-1BB41
ABB i-bus KNX Switch Actuator, x-fold, 16 A, MDRC SA/S x.16.2.1, 2CDG1101xxR0011
Technical Data 2CDC505051D0205 ABB i-bus KNX Product description Switch Actuators SA/S x.16.2.1, 16 A are modular installation devices in ProM design for installation in the distribution board. They are
SURGE PROTECTIVE DEVICES
SURGE PROTECTIVE DEVICES 1. INTRODUCTION In order to ensure safety of people, protection of equipment and, to a certain extent, continuity of supply, insulation co-ordination aims at reducing the likelihood
Thermal-Magnetic Circuit Breaker 3120-...-M1-..
Thermal-Magnetic Circuit Breaker -...-M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 34). The addition of a magnetic tripping
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC
Low Voltage Products. Switches Automatic Transfer Switches
Low Voltage Products Switches Automatic Transfer Switches Growing importance of a secure power supply Standby power is an integral part of many industrial and domestic electrical systems. High energy prices,
ZS4-SF1-T Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with test socket
Technical Datasheet SNK636D00 Catalogue Page SNK636S00 ZS-SF-T Screw Clamp Terminal Blocks For x 0 and x fuses - with test socket - Protect your circuit with x and x0 fuse terminal blocks (fuse not supplied
Uncompromising safety and comfort Miniature Circuit Breaker SU 200 M for branch circuit protection per UL and CSA
Uncompromising safety and comfort Miniature Circuit Breaker SU 200 M for branch circuit protection per UL and CSA Miniature Circuit Breaker SU 200 M The next generation MCB for UL/CSA applications within
picomax The Pluggable Connection System
picomax The Pluggable Connection System TECHNOLOGY THIS SPECIALIZED CAN T MEET ALL REQUIREMENTS. YES IT CAN. CONTENTS picomax Pin spacing: 3. mm/0.138 in;.0 mm/0.197 in; 7. mm/0.29 in Versatile Pluggable
ZS6-S Screw Clamp Terminal Blocks Disconnect with blade
Technical Datasheet SNK646D00 Catalogue Page SNK646S00 ZS6-S Screw Clamp Terminal Blocks Disconnect with blade - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,
RY2 miniature industrial relays
6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,
ZS25 Screw Clamp Terminal Blocks Feed-through
Technical Datasheet SNK668D0 Catalogue Page SNK678S0 ZS Screw Clamp Terminal Blocks Feed-through Save space by connecting conductors up to mm² AWG in just mm 0.47 in spacing. SNK68V004 SNK004F0000 D CAD
Switching Devices Contactors and Contactor Assemblies Special Applications
Switching Devices Contactors and Contactor Assemblies Special Applications Price groups PG 1B, 1H /2 Introduction Contactors for special applications / SIRIUS 3RT1 contactors for resistive loads (AC-1),
Thermistor motor protection
Thermistor motor protection CM-E Range Thermistor motor protection Thermistor motor protection relays Benefits and advantages Selection table Operating principle and fields of application for thermistor
ZS4-S-T Screw Clamp Terminal Blocks Disconnect with blade - with test socket
Technical Datasheet SNK64D00 Catalogue Page SNK64S00 ZS4-S-T Screw Clamp Terminal Blocks Disconnect with blade - with test socket - Ease your test operations with the built-in test sockets, - Screwdriver
Safety technique. Emergency stop module BO 5988 safemaster
Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1
Digital input modules
8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a
MILLENIUM INSTALLATION MANUAL NTR 735 A. Simple Automation Control Module (MAS)
MILLENIUM Table of contents 1. INTRODUCTION 1 2. HARDWARE DESCRIPTION 2 3. INSTALLATION 5 4. CONNECTION 6 5. USER SAFETY AND PROTECTION OF EQUIPMENT 8 1. Introduction The MILLENIUM series has been designed
Product and functional description
Product and functional description The KNX / DALI gateway N 141/02 is a 4 MU wide, DINrail mounted KNX device with one DALI interface to which up to 64 DALI actuators (e.g. DALI ballasts) can be connected
Manual Motor Starter MS 116 up to 16 A Technical Data
Manual Motor Starter MS 116 up to 16 A Technical Data Type MS 116 Standards: Major International IEC 60 947-4-1 / IEC 60 947-2 and European Standards EN 60 947-4-1 / EN 60 947-2 Approvals, Certificates
Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages The CM-ESS.M is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
Thermistor motor protection relays CM-MSS.22 and CM-MSS.23
Data sheet Thermistor motor protection relays CM-MSS.22 and CM-MSS.23 The thermistor motor protection relays CM-MSS.22 and CM-MSS.23 monitor the winding temperature of motors and protect them from overheating,
Catalog. Modular DIN rail components Installation contactors
Catalog Modular DIN rail components Installation contactors 0 CDC00C00 Installation contactors Benefits and features Overview Ordering details ESB installation contactors ESB0 ESB ESB0 ESB 7 EN installation
Type: DILM9 10(24VDC) Article No.: 276705
Type: DILM9 10(24VDC) Article No.: 276705 Ordering information Rated operational current AC 3 400 V I e A 9 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors, 50
Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
1 pole, 16 A Screw terminal connection 35 mm rail (EN 60715) mounting. 2 pole, 8 A Screw terminal connection 35 mm rail (EN 60715) mounting
Series - Relay interface modules 8-10 - 16 A Features.01.02 1 & 2 pole relay interface modules, screw terminal socket, mm wide. Ideal interface for PL and electronic systems.01-1 Pole 16 A.02-2 Pole 8
PHOENIX CONTACT - 2012-12-14. Features
Electronic monitoring relay for phase sequence, phase failure, and asymmetry monitoring Data sheet 101748_en_03 1 Description PHOEIX COTACT - 2012-12-14 Features Increasingly higher demands are being placed
MasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy
Bulletin 150 Smart Motor Controllers SMC-3 Smart Motor Controller
Overview/Modes of Operation Bulletin 150 Smart Motor Controller The SMC-3 is a compact, simple to use, solid-state motor controller designed to operate 3-phase motors. It features a built-in overload relay
ABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application.
1SR 430 824 F9300 Features Monitoring of three-phase mains for phase sequence and failure Powered by the measuring circuit 2 c/o (SPDT) contacts 1 LED for status indication Approvals R: yellow LED - relay
Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
Technical Manual Functional Description for S800-RSU-H / S800W-RSU 2CCC413022M0205. 8201 Schaffhausen 1 / 10
ABB ABB Schweiz AG Technical Manual Functional Description for S800-RSU-H / S800W-RSU 2CCC413022M0205 09.04.2014 Page: 8201 Schaffhausen 1 / 10 Please use also the assembly instruction S800-RSU-H Remote
Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
ABB 1 NEW. Three-phase monitoring relay for grid feeding CM-UFS.1. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories
2CDC 251 014 F0t09 Features Monitoring of three-phase mains for grid feeding Type-tested in accordance with DIN V VDE V 0126-1-1: February 2006 Neutral conductor connection configurable Can also be used
Product and Applications Description. Application Programs. Example of Operation. GAMMA instabus Technical Product-Information.
Product and Applications Description The power supply units N 125/x2 can supply DC 24 V power from an additional pair of terminals (yellowwhite). This DC 24 V output voltage can be used to power e.g. an
LINETRAXX VMD460-NA. Network and system protection (NS protection) for monitoring the power feed-in of power generation systems
LIETRAXX -A etwork and system protection (S protection) for monitoring the power feed-in of power generation systems TDB301021en/06.2013 LIETRAXX -A etwork and system protection (S protection) for monitoring
MasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - 39 Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic
34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51
34 Series - Slim electromechanical PCB relays 6 34 SERIES Features 34.51 Ultra-slim 1 Pole - 6 relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in
80 Series - Modular timers 16 A. Features 80.01 80.11
80 Series - Modular timers 16 A Features 80.11 Multi-function and mono-function timer range - Multi-function & multi-voltage 80.11 - On-delay, multi-voltage 17.5 mm wide Six time scales from 0.1s to 24h
MOTOR PROTECTIVE DEVICES
W MOTOR PROTECTIVE DEVICE, SERIES MP 206 BE400206 BE400306 Inherently stable without back-up fuseup to 4 A at 400 V AC, > 4 A main back-up fuse 100 A gl Thermal and magnetic release Terminal and accessory
Components for System Solutions E9/5. Ex d Enclosure System Made of Light Metal or Stainless Steel, "Flameproof Enclosure" Series 8264. www.stahl.
> Installation chamber can be fully used > Up to three mounting levels can be used > Saving of weight > Compact > Easy to combine > 26 enclosure versions > 15 window versions www.stahl.de 10303E00 The
HS5D. Miniature Interlock Switches First in. Head Removal Detection Function for Safer Performance. First in. the Industry.
y HS5D First in the Industry Miniature Interlock Switches First in the Industry Head Removal Detection Function for Safer Performance (*based on IDEC research, July 09) New Generation Miniature Interlock
60 Series - General purpose relays 6-10 A. Features 60.12 60.13
Features 60.12 60.13 Plug-in mount 10 A General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listing (certain relay/socket combinations)
8146/5 Series Breaker Panelboards
8146/5 Series Breaker Panelboards DISTRIBUTION BREAKER PANELBOARDS FOR HAZARDOUS & CORROSIVE ENVIRONMENTS Breaker Panels Features: Wide variety of Flameproof branch circuit breakers for Zone 1 & Division
E-STOP relays, safety gate monitors
Unit features Safety features Gertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided
Siemens AG 2011 SINAMICS V60. The perfect solution for basic servo applications. Brochure May 2011 SINAMICS. Answers for industry.
The perfect solution for basic servo applications Brochure May 2011 SINAMICS Answers for industry. with 1FL5 servomotors The solution for basic servo applications There is a requirement to automate motion
ELEKTROTEHNI KO PODJETJE Leskoπkova cesta 12, 1000 Ljubljana, SLOVENIA
MRO Modularne Razdelilne Omare d.o.o. ELEKTROTEHNI KO PODJETJE Leskoπkova cesta 2, 000 Ljubljana, LOVENIA MC GENERAL When to use? MC - modular switchgear cabinets are type-tested, factory built switchgears,
Single-phase (220...240 V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable
Features 70.11 70.31 70.41 Electronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring Undervoltage, Overvoltage, Window
Technical data UNIBLOCK UBSF 180 625
Data TECHNICL DT Technical data UNIBLOCK UBSF 80 6 Output data Type UBSF 80 UBSF 0 UBSF 00 UBSF 6 Output power 80 kv 0 kv 00 kv 6 kv Output voltage 80/77 V 0/ V 0/ V 0/ V Output current 7 8 66 80 Power