VEETS and ESS Approved ANL Lighting Products

Transcription

1 VEETS and ESS Approved ANL Lighting Products

2 Victoria - VEETS The VEET scheme is a Victorian Government initiative promoted as the Energy Saver Incentive. It commenced on 1 January 2009 and is administered by the Essential Services Commission (ESC). The scheme was established under the Victorian Energy Efficiency Target Act 2007 and is administered in accordance with the Victorian Energy Efficiency Target Regulations The VEET scheme is designed to make energy efficiency improvements more affordable, contribute to the reduction of greenhouse gases, and encourage investment, employment and innovation in industries that supply energy efficiency goods and services. Under the scheme, accredited businesses can offer discounts and special offers on selected energy saving products and appliances installed at homes, businesses or other non-residential premises. The bigger the greenhouse gas reduction, the bigger the potential saving. Schedule 34 Lighting upgrade describes the requirements of the prescribed activity of either: Decommissioning existing lighting equipment and installing more energy efficient lighting equipment 1 or Removing no more than half the lamps from a multiple lamp fitting, decommissioning the associated ballast (if any) and decommissioning the associated tombstone or terminal (if any). Schedule 34 Lighting upgrade can be undertaken at the following locations: In a building that is classified under the 2008 edition of the Building Code as Class 3, or in the common areas of a building that is classified as Class 2; and in a building that is classified under the 2008 edition of the Building Code as Class 5, 6, 7, 8, 9 and 10(b). This means that lighting upgrades are eligible to create Victorian energy efficiency certificates (VEECs) under Schedule 34 when conducted at some residential premises such as hotels and the residential areas of healthcare buildings. Lighting upgrades undertaken at commercial premises like offices, restaurants, service stations, health care buildings and car parks are also eligible under Schedule 34. Lighting upgrades are not currently eligible to create VEECs if undertaken at public parks, private garages or if undertaken on traffic lights or street lighting. To find out more about the scheme please visit NSW - ESS The Energy Savings Scheme is established under NSW legislation. Its main objective is to assist households and businesses to reduce electricity consumption and electricity costs. Businesses that save energy by installing, improving or replacing energy savings equipment can gain financial incentives by participating in the scheme. Financial incentives for saving energy When businesses invest in reducing their energy use, energy savings certificates are created by the voluntary scheme participants that have helped to implement those energy savings activities. Electricity retailers, who are mandatory scheme participants, then buy the energy savings certificates to meet their own legislated targets, as required by law. Energy savings certificates are the currency of the scheme. The Energy Savings Scheme is not a rebate scheme. Eligible energy saving activities There are two main options for including lighting projects within the Energy Savings Scheme: 1. Commercial lighting, for lighting retrofits in commercial or industrial facilities 2. Halogen lighting replacements, for the replacement of 50W halogen downlights. Commercial lighting Energy savings from commercial lighting activities are calculated using the Commercial Lighting Energy Savings Formula (clause 9.4 of the ESS Rule). Using this approach, energy savings can be claimed by Accredited Certificate Providers for a wide range of lighting retrofits. This includes everything from the replacement of lights in a car park, to the complete refurbishment of industrial facilities. The basis of the approach is that evidence is collected to show the lighting configuration before and after an upgrade has taken place, and testing is carried out to ensure that the final lighting configuration meets relevant lighting standards to ensure output and service levels are maintained. Halogen lighting replacements Energy savings from halogen lighting replacement activities are calculated using the Default Savings Factors method (clause 9.3 of the ESS Rule). This approach is specifically tailored to the replacement of 50-watt (50W) Halogen Extra Low Voltage (ELV) lamps. Using this approach, simple activities can be conducted involving the direct swap of 50W lamps for 35W lamps within the same fitting, or more complex retrofits can be undertaken involving the replacement of the whole 50W lamp fitting. In order to ensure lighting levels are maintained, the lighting characteristics of each type of replacement lamp must meet a light output test. To find out more about the scheme please visit 1 Lighting equipment includes lamps, T5 adaptors, light fittings, lighting control devices and reflectors. 2

3 Reduce your electricity bill with Vibe LED products - Superior LED technology in all shapes and sizes Vibe LED products are using the latest energy saving technology for the industrial and residential use Environmentally friendly Long lifetime Instant on and off Cutting edge LED technology Modern and stylish designs Superior quality of light Now with one more reason to choose Vibe LED products: Our quality range of LED products are participating in VEETS and ESS state government schemes. 3

4 Lamps LED Replacement for Fluorescent Tubes VBLFT-3x5-C-50 Single ended isolated power supply Clear or Frosted lens Colour Temperature: 5000K (Natural White) and 6500K (Daylight) SAA / C-tick approved *Other colour temperatures available on request - lead times apply **For more information, please speak to your sales representative Code Lens Wattage Input Voltage Lifespan LED Source Beam Angle Colour Temperature VBLFT-325-C-50 Clear 5000K 10W VBLFT-325-F-65 Frosted 6500K Lumen Output lm Dimensions Ø26 x 588mm VBLFT-335-C-50 16W 85-50, lm Ø26 x 89m Clear K VBLFT-345-C V hours SMD 22W lm Ø26 x 1198mm VBLFT-345-F-65 Frosted 6500K VBLFT-355-C-50 Clear 26W 5000K lm Ø26 x 1498mm 4

5 These modern and sleek designed LED lamps are ideal as a direct replacement for Halogen MR16 lamps, with the 6W LED replacing a 35W Halogen and the 9W LED replacing a 50W Halogen. They are dimmable on trailing edge dimmers with electronic transformers ONLY. Please contact your sales representative for recommended dimmers. Colour Temperatures: 3000K (Warm White) and 4000K (Cool White) VBLMR16R6W LED MR16 Retrofit Lamps Lamps 3000K 4000K lx lx lx lx Replaces 35W lx lx lx lx 242.9lx 107.9lx Works well with Osram REDBACK transformers, as a one to one replacement Some electronic transformers have a minimum load requirement and may need more than one lamp connected in order for the lamp to work Requires a minimum of 3 lamps on dimmer Base Wattage Input Voltage Lifespan LED Source Beam Angle Lumen Output CRI Dimensions GX5.3 6W 12V 50,000 hours NICHIA lm (WW) 500lm (CW) 85 Ø50 x 49.m VBLMR16R9W K K lx lx lx lx lx lx lx lx lx lx Replaces 50W K K lx lx lx lx Works on most brands of electronic transformers and 12V DC power supplies, including VIBE, VIPER, POSSUM and Osram REDBACK Requires a minimum of 2 lamps on dimmer lx 122.3lx 54.36lx lx 120.4lx 53.54lx Base Wattage Input Voltage Lifespan LED Source Beam Angle Lumen Output CRI Dimensions GX5.3 9W 12V 50,000 hours NICHIA lm (WW) 700lm (CW) 520lm (WW) 580lm (CW) 85 Ø50 x 58mm 5

6 Lamps Earthmate CFL Lamps Earthmate Compact Fluorescent Lamps use 75% less energy than standard incandescents and help with reducing greenhouse gases and fighting global warming. Contains <g mercury Instant start, no flicker 10,000 hour rated life Packaging made from 100% postconsumer waste recyclable material Printed with soy-based inks Available in Bayonet Cap (BC) and Edison Screw (ES) 7W also available in Small Bayonet Cap (SBC) and Small Edison Screw (SES) Colour Temperatures: 3000K (Warm White) and 5000K (Daylight) EM7W EM11W EM15W EM20W EM23W Code Base Wattage Input Voltage Lumen Output Replacement EM7WBC B22 EM7WES E27 EM7WSBC B15 7W 420lm 40W Incandescent EM7WSES E14 EM11WBC B22 11W 650lm 60W Incandescent EM11WES E27 240V EM15WBC B22 15W 900lm 75W Incandescent EM15WES E27 EM20WBC B22 EM20WES E27 20W 1300lm 100W Incandescent EM23WBC B22 EM23WES E27 23W 1600lm 120W Incandescent 6

7 12W Downlights This range of architecturally designed downlights are both modern & versatile. They are compact in size and can be used as a direct replacement for fixed & gimbal 50W Halogen downlights. Colour Temperatures: 3000K (Warm White) and 4000K (Cool White) Downlights VBLDL VBLDL VBLDL Cutout Ø88mm Cutout Ø70mm Cutout Ø66mm Specifications Wattage Input Current Lamp Life LED Source Beam Angle Lumen Output CRI 12W 350mA 40,000 hours EPISTAR lm (WW) 740.8lm (CW) > K 4000K lx lx lx lx lx lx lx lx lx lx Please select suitable driver at time of ordering Available in hardwired or with a flex and plug Non-dimmable Dimmable VBLDL-35013FP (with flex & plug) VBLDL-35013HW (hardwired) VBLDL-35013FP-D (with flex & plug) VBLDL-35013HW-D (hardwired) 7

8 Downlights VBLDL-155 White Brushed Chrome Low energy consumption SAA approved IP44 - protects against splashing water and solid objects larger than m Remote Dimmable 700mA LED Driver Colour Temperatures: 3000K (Warm White) and 5000K (Natural White) Wattage Input Voltage Lamp Life LED Source Beam Angle Lumen Output CRI Cutout 12W 240V 50,000 hours SAMSUNG (20 x SMD5630) 106 >700lm (WW) >800lm (NW) >82 Ø90mm 3000K 5000K lx lx lx lx lx lx lx lx lx lx 8 8

9 VBLDL W Downlights Downlights White Satin Chrome 3000K 5000K lx lx lx lx lx lx lx lx lx lx Large 2.m terminals for hard wiring Suitable for replacing 50W halogen downlights Comes with a built in driver Can be dimmed with most HPM / CLIPSAL leading or trailing edge dimmers (40 ~ 100%) Suitable for residential areas, hotels, offices and restaurants Colour Temperatures: 3000K (Warm White) and 5000K (Natural White) Wattage Input Voltage Lamp Life LED Source Beam Angle Lumen Output CRI Cutout 12W 240V 35,000 hours SAMSUNG lm (WW) 840lm (NW) Ø98mm 9

10 Downlights VBLDL W LED Dimmable Downlight Satin Chrome White Low energy consumption SAA approved Suitable for residential areas, hotels, offices and restaurants Can be dimmed with most HPM / CLIPSAL leading or trailing edge dimmers Available in Satin Chrome or White trim Colour Temperatures: 3000K (Warm White) and 5000K (Natural White) Wattage Input Voltage Lifespan LED Source Beam Angle 15W 240V 40,000 hours EPISTAR 103 Lumen Output 818lm (WW) 919lm (NW) CRI Cutout Ø90mm 3000K 5000K lx lx lx lx lx lx lx lx lx lx 10

11 VBLDL Suitable replacement for a 2 x 18W PL downlight Architecturally designed Dimmable on most domestic or commercial lighting systems with appropriate driver Ideal for use in hotels, retail shops, offices and restaurants Colour Temperature: 4000K Cool White **Other colour temperatures and trim colours are available on request. Lead times will apply 4000K Downlights lx lx lx Wattage Input Current Lamp Life LED Source Beam Angle Lumen Output CRI Cutout 19W 700mA 50,000 hours 168 x 3014 SMD lm 74 Ø170mm lx 18.96lx VBLDL Suitable replacement for a 2 x 26W PL downlight Architecturally designed Dimmable on most domestic or commercial lighting systems with appropriate driver Ideal for use in hotels, retail shops, offices and restaurants Colour Temperature: 4000K Cool White **Other colour temperatures and trim colours are available on request. Lead times will apply 4000K lx lx Wattage Input Current Lamp Life LED Source Beam Angle Lumen Output CRI Cutout lx 37.13lx 24W 700mA 50,000 hours 216 x 3014 SMD lm 74 Ø210mm lx Accessories VBLDR700-27W-D Dimmable LED Driver, 27W, 700mA complete with flex & plug Dimmable with most HPM / CLIPSAL leading or trailing edge dimmers Large 2.m terminals for hardwiring (if required) 11

12 Downlights VBLDL W LED Shoplighters 3000K 5000K lx lx lx lx lx lx lx lx lx lx Replaces 70W Metal Halide 60 adjustable angle Comes complete with 700mA LED Driver and flex & plug White trim Colour Temperatures: 3000K (Warm White) and 5000K (Natural White) Wattage Input Current Lifespan LED Source Beam Angle Lumen Output CRI Cutout 28W 700mA 50,000 hours CITIZEN lm (WW) 2765lm (NW) 80 Ø17m VBLDL K 5000K lx lx lx lx lx lx lx lx lx lx Replaces 70W Metal Halide 45 adjustable angle Comes complete with 700mA LED Driver and flex & plug White trim Colour Temperatures: 3000K (Warm White) and 5000K (Natural White) Wattage Input Current Lifespan LED Source Beam Angle Lumen Output CRI Cutout 28W 700mA 50,000 hours CITIZEN lm (WW) 2765lm (NW) x 157mm 12

13 VBLDL W LED Shoplighters Downlights Replaces 100W Metal Halide 60 adjustable angle Comes complete with SAA Approved LED Driver and flex & plug White trim Colour Temperatures: 3000K (Warm White) and 5000K (Natural White) Wattage Lifespan Beam Angle Lumen Output CRI 45W 35,000 hours lm (WW) 3200lm (NW) >85 13

14 Downlights Express Recessed LED T-Bar Troffers VBLFS Wattage Input Voltage Lifespan LED Source Beam Angle Lumen Output CRI Cutout 2 x 20W V 30,000 hours SAMSUNG lm x 278mm 1200 x 300 Recessed LED fitting Replacement for 2 x 36W T8 Fluorescent fitting Has omni-directional luminance control (OLC), providing excellent lighting without glare Easy to install and maintain Can be dimmed on most HPM / CLIPSAL leading or trailing edge dimmers and on most commercial lighting systems Silver trim Colour Temperatures: 4000K (Cool White) and 5000K (Natural White) Accessory for plaster ceilings - VB228-ULB-IM-PF **Other colour temperatures and cone diagrams are available on request. Lead times will apply VBLFS Wattage Input Voltage 4 x 10W V Lifespan 30,000 hours LED Source Beam Angle Lumen Output CRI Cutout SAMSUNG lm x 578mm 600 x 600 Recessed LED fitting Replacement for 4 x 18W T8 Fluorescent fitting Has omni-directional luminance control (OLC), providing excellent lighting without glare Easy to install and maintain Can be dimmed on most HPM / CLIPSAL leading or trailing edge dimmers and on most commercial lighting systems Silver trim Colour Temperatures: 4000K (Cool White) and 5000K (Natural White) **Other colour temperatures and cone diagrams are available on request. Lead times will apply

15 LED Floodlights Industrial Suitable for replacing Halogen floodlights Comes complete with SAA Approved flex & plug U-bracket for easy mounting Powdercoated black gloss Machined aluminium Black trim and face IP65 Colour Temperature: 4000K (Cool White) 200W Code Wattage Input Voltage Lifespan LED Source Lumen Output Replacement Dimensions VBLFL W lm 80W Halogen 180 x 140 x 120mm VBLFL W 2400lm 100W Halogen 225 x 183 x 12m VBLFL W 50,000 CREE 4000lm 120W Halogen 285 x 250 x 100mm V VBLFL W hours (OEM) 5600lm 150W Halogen 280 x 250 x 15m VBLFL W 9600lm 250W Halogen 320 x 250 x 158mm VBLFL W 16000lm 400W Halogen 422 x 340 x 158mm 15

16 Industrial LED High Bays Three choices of reflector: 45 acrylic, 45 aluminium or 120 aluminium SAA Approved MEANWELL Driver IP65 Ideal for use in warehouses, factories, showrooms, exhibitions and livestock shelters Code Wattage Input Voltage Lifespan LED Source Lumen Output Colour Temperature CRI VBLHB W 50, lm V CREE 3535 VBLHB W hours 18000lm 5000K W directly replaces 250W Metal Halide 200W directly replaces 400W Metal Halide 16

17 Reflectors Industrial VBLHB-ACR45 45 Acrylic Reflector Dimensions: Ø420 x 2 VBLHB-ALU45 45 Aluminium Reflector Dimensions: Ø420 x 2 VBLHB-ALU Aluminium Reflector Dimensions: Ø482 x 130mm 60W 60W 60W lx lx lx lx lx lx lx lx lx lx lx lx lx lx lx 120W 120W 120W lx lx lx lx lx lx lx lx lx lx lx lx lx lx lx 200W 200W 200W lx lx lx lx lx lx lx lx lx lx lx lx lx lx lx 17

18 Industrial VBLLB LED Canopy Lights Very high light output Architecturally designed SAA Approved driver Replaces 400W Metal Halide White trim Colour Temperature: 5600K (Natural White) Supplied as recessed Comes with surface mounted frame IP54 Suitable for cool rooms, freezers, petrol stations, warehouses, supermarkets and gymnasiums Code Wattage Input Voltage Lifespan LED Source Lumen Output Cutout for Recessed VBLLB W BXRA- 4160lm 373 x 37m V 30,000 hours VBLLB W 56C0700-A lm 611 x 61m CRI 75 VBLLB VBLLB lx lx lx lx lx lx lx 994lx lx lx 18