A-SERIES Small Aperture LED, Halogen and Metal Halide Recessed Luminaires

Transcription

1 A-SRIS Small Aperture LD, Halogen and Metal Halide Recessed Luminaires

2 Achieve beautiful lighting with ease A-SRIS architectural grade luminaires offer design flexibility with simple installation from below the ceiling. With an extensive line of round and square fittings available with LD, low voltage halogen MR16 or ceramic metal halide MR16, designers can opt for a quick three step installation of trimmed fittings or choose to create a clean uncluttered ceiling with trimless inserts. The small aperture size, consistent aesthetic across the product family and the ability to adjust from to 45 to highlight details with precision, allow for a more sophisticated lighting design. Future maintenance is efficient with inserts that can be quickly removed and replaced without a tool, the ability to lock the tilt angle, and interchangeability of the LD array as recommended by emerging industry standards. 2 3

3 LD, low voltage or metal halide MR16 lamp options Fits ceilings with 9mm to 20mm thickness Install from below the ceiling Quick connect wiring Trimmed or trimless options Self-contained electronic control gear included Adjustable from to 45 tilt with ability to lock LD is dimmable to 20% with trailing edge, or to 10% with DALI or 0-10V(120V only) Inserts attach to housing using torsion springs Round inserts: downlight, angle cut, pinhole or wall wash Square inserts: downlight, accent or wall wash For use in applications not requiring an enclosed housing C Listed TRIMMD Trimless Installation Hardware AP - Pinhole AC - Angle Cut DR - Downlight Reflector Lamp Holder & Aiming Mechanism AS - Adjustable Splayed TRIMLSS AP - Pinhole AC - Angle Cut Trim / Trimless Insert 4 DR - Downlight Reflector AS - Adjustable Splayed 5

4 With state-of-the-art interchangeable reflectors and translating center beam optics that allow for maximum light output, A-SRIS full line of LD luminaires can be used to reduce maintenance costs and increase energy efficiency of the most demanding lighting designs. ROUND TRIMMD OR TRIMLSS SQUAR TRIMMD ORDRING TYP A A-SRIS Architectural Grade Recessed Luminaire LD FATURS 1100 lumen package 1 130mm dia. 145mm sq. STYL R S Round Trim Insert Square Trim Insert 85 CRI, 3000K 1 10, 15, 25 or 40 beam distribution 70% lumen maintenance at 50,000 hours Translating center beam optics AC AS PLATFORM AC Adjustable Angle Cut (round only) AS Adjustable Splayed Downlight (square only) AP Adjustable Pinhole (round only) DR Downlight Reflector (round only) Wall Wash Interchangeable reflectors lectronic control gear included. Specify non-dimming, trailing edge dimming to 20%, or DALI to 10%. 0-10V to 10% is also available at 120V only. Zhaga compliant fitting and module to simplify future upgrades 1. Consult factory for additional LD module options AP 44mm dia. SQUAR TRIMLSS LIGHT SOURC LD K, 1 Narrow Spread, 1100 Lumens, 85 CRI LD K, Medium Spread, 1100 Lumens, 85 CRI LD K, 25º Wide Spread, 1100 Lumens, 85 CRI LD K, 4 Flood Spread, 1100 Lumens, 85 CRI Consult factory for additional color temperature and color rendering options 071M16 12V MR16 71W max. (consult factory for de-rated label options) PHOTOMTRY Square Wall Wash 25º Reflector 9 1 Reflector 3 Position 9 Reflector Position 9 Legend Reflector Position 9 DR AS 125mm sq. 020C16 039C16 20W CMHMR16 39W CMHMR16 POWR SUPPLY LD - lectronic Driver Non-Dimmable D LD - lectronic Driver Trailing-dge Dimmable A LD - lectronic Driver DALI Dimmable W LD - lectronic Driver 0-10V (120V only) V MR16 - lectronic Low Voltage Transformer CMHMR16 - lectronic Metal Halide Ballast PRIMARY VOLTAG Volts, 60 Hertz (C Only) Volts, Hertz TRIM INSRT T Trimmed N Trimless TRIM FINISH W White 25º Reflector Position º Reflector Position º Reflector 3 Position º Reflector Position POWR SUPPLY Remote, SLV power supply provided. Power supply attaches by 25cm insulated cable to luminaire, can be surface mounted without additional insulation and is thermo-protected. Consult factory for custom trim fin ishes ORDRING XAMPL ARAC301511A4NW A-SRIS, Round Adjustable Angle Cut insert, LD 3000K, Medium Spread, 1100 lumens, 85 CRI, DALI Dimmable lectronic LD Driver, Volts Primary Voltage, Trimless, White APPLICATIONS Hospitality Retail Commercial Residential For use in applications not requiring an enclosed housing 6 6 7

5 RSA 7945 Orion Ave. Van Nuys, CA P: F: Cooper Lighting, LLC. Customer First Center 1121 Highway 74 South Peachtree City, GA P: F: International Sales, USA Cooper Lighting 1121 Highway 74 South Peachtree City, GA P: F: Canada Cooper Lighting 5925 McLaughlin Road Mississauga, Ontario L5R 1B8 P: F: The Cooper Lighting Family Halo Metalux Lumark Sure-Lites Neo-Ray Corelite Portfolio Iris Shaper io Lumière Invue McGraw-dison Streetworks Fail-Safe MWS DLS RSA Ametrix Domestic Facilities Cranbury, New Jersey lk Grove Village, Illinois Irving, Texas Ontario, California Peachtree City, Georgia Canadian Facilities Calgary, Alberta T2 7V9 Cooper Lighting and RSA are valuable trademarks of Cooper Industries in the United States and other countries. You are not permitted to use the Cooper Trademarks without the prior written consent of Cooper Industries. Cooper Industries, Ltd. 600 Travis, Ste Houston, TX P: ASA Printed in USA