Automatic drilling and insertion machines Blue Max Modular
|
|
- Roderick Horton
- 7 years ago
- Views:
Transcription
1 Automatic drilling and insertion machines Blue Max Modular
2 Publisher's imprint: Hettich FurnTech GmbH & Co. KG Vlotho Germany We reserve all rights to this catalogue under copyright law. It shall not be permissible to duplicate this catalogue in any form either in whole or in part without our written consent. Subject to technical alterations. Pictures could show mounted accessories. Errors and omissions excepted. Subject to colour variations. March 2010 Bestell-Nr
3 Catalogue summary The machine system for newcomers and advancing users Blue Max Modular Page 2-5 Blue Max Modular Professional Page 6-9 Blue Max Modular Advanced Plus Blue Max Modular Advanced Blue Max Modular Basic Plus Blue Max Modular Basic Blue Max Modular Page Page Page Page Page Basic Basic Plus Advanced Advanced Plus Professional 1
4 The machine system for newcomers and advancing users Blue Max Modular 2
5 Five configuration levels for tailor-made machinery Whether it's the Basic, Basic Plus, Advanced, Advanced Plus or Professional, Hettich's "Blue Max Modular" facilitates precision craftsmanship in the workshop. Exchangeable drilling units on all modules save time preparing for different jobs. Straightforward machine setting and pneumatic hold-down clamps optimise work flows. The new modular system is geared to the specific needs of the fabricator. Whichever version is chosen, it saves time, optimises precision and facilitates overall handling. 3
6 Range summary / Technical comparison i Motor power rating Interchangeable drilling unit Capability of using hole-line unit turned through 90 Professional 1,6 kw (2,1 PS) 380 Volt / 50 Hz / 3 -phase Hole lines Hinges Mounting plates Connecting fittings Drawer front connections Advanced Plus 1,6 kw (2,1 PS) 380 Volt / 50 Hz / 3 -phase Hole lines Hinges Mounting plates Connecting fittings Drawer front connections Advanced 1,6 kw (2,1 PS) 380 Volt / 50 Hz / 3 -phase Hole lines Hinges Mounting plates Connecting fittings Drawer front connections - Basic Plus 1,6 kw (2,1 PS) 380 Volt / 50 Hz / 3 -phase Hole lines Hinges Mounting plates Connecting fittings Drawer front connections Basic 1,6 kw (2,1 PS) 380 Volt / 50 Hz / 3 -phase Hole lines Hinges Mounting plates Connecting fittings Drawer front connections - Interchangeable drilling unit / Press-in frame see pages Stop support / System 32 hole-spacing bar see page
7 i Blue Max Modular Range summary / Technical comparison Pneumatic workpiece holddown clamp Work bench Pneumatic caterpillar drive LCD display Side adjustment Depth adjustment Horizontal drilling unit 560 x 3000 mm 2250 mm 550 mm 560 x 3000 mm mm 550 mm 300 x 3000 mm mm 90 mm 560 x 800 mm mm 300 x 800 mm mm Stops / Laser / Insertion dies / Various accessories see pages Drill bits see pages Technik für Möbel 5
8 Professional Pneumatic hold-down clamp for fixing workpiece Rapid depth adjustment using latch levers for: Drilling hinge holes Drilling hole lines Mounting plates Connecting fittings Depth adjustment of up to 550 mm facilitates the machining of large workpieces Interchangeable drilling units provide the capability of adapting hole patterns and save resetting time. Workpieces are machined quickly and in full. Hinges: Drill holes / press-in type Mounting plates: Drill holes / press-in type Connecting fittings: Drill holes / press-in type Runners: Drill holes System 32 hole lines: Drill holes Caterpillar drive for hole lines with individually adjustable cam actuation for variable hole line patterns 2250 mm side adjustment is used exactly and quickly simply by repositioning the handle and turning the spindle. There is no need to move the workpiece! 6
9 Professional Fast and straightforward setting of the drilling depth Straightforward machine setting for quickly optimising various work operations Optimum travel for drilling and inserting Shorter distances for hole-line drillings with continuation stop Professional Surface for holding tool and fittings The 5-spindle horizontal drilling unit allows you to drill holes for connecting fittings and wooden dowels at one and the same time Digital display of hole pattern to the accuracy of one tenth of a millimetre Technik für Möbel 7
10 Professional Technical brief: 1050 Motor power rating of vertical drilling unit: 1,6 kw (2,1 PS) Motor power rating of horizontal drilling unit: 0,75 kw (1 PS) Voltage: 380 Volt, 3 -phase Insertion pressure at 6 bar: 296 kg Weight without horizontal drilling unit: 176 kg Weight with horizontal drilling unit: 199 kg Diameter of connection for chip extractor: 100 mm Volumetric flow: 141 m 3 / h Air consumption: 1,2 litres / lift Work bench: 3080 x 620 mm Recommended base-unit height: 850 mm
11 Professional Blue Max Modular Professional with horizontal drilling unit without horizontal drilling unit Stop support set Interchangeable drilling unit for System 32, 19 spindles Interchangeable drilling unit for System 32, 19 spindles with quick-change chuck Interchangeable drilling unit for System 32, 9 spindles Interchangeable drilling unit for System 32, 9 spindles with quick-change chuck Interchangeable drilling unit for System 32, 5 spindles Interchangeable drilling unit for System 32, 5 spindles with quick-change chuck Interchangeable drilling unit for hinges Interchangeable drilling unit for hinges with quick-change chuck Interchangeable drilling unit VB with quick-change chuck Press-in frame for interchangeable drilling unit hinge and connecting fitting Professional Additional hold-down clamp for horizontal drilling unit Extension set for hold-down clamp set Insertion dies Hinge range sensys Hinge ranges Intermat, Ecomat, Slide-on Hinge range Selekta Pro Connecting fittings VB 18 / 19 / 20 / Connecting fittings VB Drawer front connections MultiTech For drill bits, see pages Centre stop, width 235 mm Centre stop, short, width 195 mm Right-hand tilt stop for dimensioned extension fence Left-hand tilt stop for dimensioned extension fence Laser with 3D ball-head holder D aluminium holder Further accessories, see pages Technik für Möbel 9
12 Advanced Plus Pneumatic hold-down clamp for fixing workpiece Rapid depth adjustment using latch levers for: Drilling hinge holes Drilling hole lines Mounting plates Connecting fittings Depth adjustment of up to 550 mm facilitates the machining of large workpieces Interchangeable drilling units provide the capability of adapting hole patterns and save resetting time. Workpieces are machined quickly and in full. Hinges: Drill holes / press-in type Mounting plates: Drill holes / press-in type Connecting fittings: Drill holes / press-in type Runners: Drill holes System 32 hole lines: Drill holes Manual side adjustment with variable cam actuation for any chosen holeline pattern as well as rotatable, adjustable latch lever profile for various basic settings 2250 mm side adjustment is used exactly and quickly simply by repositioning the handle and turning the spindle. There is no need to move the workpiece! 10
13 Advanced Plus Fast and straightforward setting of the drilling depth Straightforward machine setting for quickly optimising various work operations Optimum travel for drilling and inserting Shorter distances for hole-line drillings with continuation stop Advanced Plus Surface for holding tool and fittings The 5-spindle horizontal drilling unit allows you to drill holes for connecting fittings and wooden dowels at one and the same time Digital display of hole pattern to the accuracy of one tenth of a millimetre Technik für Möbel 11
14 Advanced Plus Technical brief: 1050 Motor power rating of vertical drilling unit: 1,6 kw (2,1 PS) Motor power rating of horizontal drilling unit: 0,75 kw (1 PS) Voltage: 380 Volt, 3 -phase Insertion pressure at 6 bar: 296 kg Weight without horizontal drilling unit: 155 kg Weight with horizontal drilling unit: 178 kg Diameter of connection for chip extractor: 100 mm Volumetric flow: 141 m 3 / h Air consumption: 1,2 litres / lift Work bench: 3080 x 620 mm Recommended base-unit height: 850 mm
15 Advanced Plus Blue Max Modular Advanced Plus with horizontal drilling unit without horizontal drilling unit Stop support set Interchangeable drilling unit for System 32, 19 spindles Interchangeable drilling unit for System 32, 19 spindles with quick-change chuck Interchangeable drilling unit for System 32, 9 spindles Interchangeable drilling unit for System 32, 9 spindles with quick-change chuck Interchangeable drilling unit for hinges Interchangeable drilling unit for hinges with quick-change chuck Interchangeable drilling unit VB with quick-change chuck Press-in frame for interchangeable drilling unit hinge and connecting fitting Advanced Plus Additional hold-down clamp for horizontal drilling unit Extension set for hold-down clamp set Insertion dies Hinge range sensys Hinge ranges Intermat, Ecomat, Slide-on Hinge range Selekta Pro Connecting fittings VB 18 / 19 / 20 / Connecting fittings VB Drawer front connections MultiTech For drill bits, see pages Centre stop, width 235 mm Centre stop, short, width 195 mm Right-hand tilt stop for dimensioned extension fence Left-hand tilt stop for dimensioned extension fence Laser with 3D ball-head holder D aluminium holder Further accessories, see pages Technik für Möbel 13
16 Advanced Pneumatic hold-down clamp for fixing workpiece Interchangeable drilling units provide the capability of adapting hole patterns and save resetting time. Workpieces are machined quickly and in full. Hinges: Drill holes / press-in type Mounting plates: Drill holes / press-in type Connecting fittings: Drill holes / press-in type Runners: Drill holes System 32 hole lines: Drill holes Manual side adjustment with variable cam actuation for any chosen holeline pattern as well as rotatable, adjustable latch lever profile for various basic settings 2250 mm side adjustment is used exactly and quickly simply by repositioning the handle and turning the spindle. There is no need to move the workpiece! 14
17 Advanced Fast and straightforward setting of the drilling depth Straightforward machine setting for quickly optimising various work operations Optimum travel for drilling and inserting Shorter distances for hole-line drillings with continuation stop Surface for holding tool and fittings Advanced The 5-spindle horizontal drilling unit allows you to drill holes for connecting fittings and wooden dowels at one and the same time Digital display of hole pattern to the accuracy of one tenth of a millimetre Technik für Möbel 15
18 Advanced Technical brief: 1050 Motor power rating of vertical drilling unit: 1,6 kw (2,1 PS) Motor power rating of horizontal drilling unit: 0,75 kw (1 PS) Voltage: 380 Volt, 3 -phase Insertion pressure at 6 bar: 296 kg Weight without horizontal drilling unit: 125 kg Weight with horizontal drilling unit: 148 kg Diameter of connection for chip extractor: 100 mm Volumetric flow: 141 m 3 / h Air consumption: 1,2 litres / lift Work bench: 3080 x 620 mm Recommended base-unit height: 850 mm
19 Advanced Blue Max Modular Advanced with horizontal drilling unit without horizontal drilling unit Stop support set Interchangeable drilling unit for System 32, 19 spindles Interchangeable drilling unit for System 32, 19 spindles with quick-change chuck Interchangeable drilling unit for System 32, 9 spindles Interchangeable drilling unit for System 32, 9 spindles with quick-change chuck Interchangeable drilling unit for hinges Interchangeable drilling unit for hinges with quick-change chuck Interchangeable drilling unit VB with quick-change chuck Press-in frame for interchangeable drilling unit hinge and connecting fitting Additional hold-down clamp for horizontal drilling unit Extension set for hold-down clamp set Insertion dies Hinge range sensys Hinge ranges Intermat, Ecomat, Slide-on Hinge range Selekta Pro Connecting fittings VB 18 / 19 / 20 / Connecting fittings VB Drawer front connections MultiTech Advanced For drill bits, see pages Centre stop, width 235 mm Centre stop, short, width 195 mm Right-hand tilt stop for dimensioned extension fence Left-hand tilt stop for dimensioned extension fence Laser with 3D ball-head holder D aluminium holder Further accessories, see pages Technik für Möbel 17
20 Basic Plus Rapid depth adjustment using latch levers for: Drilling hinge holes Drilling hole lines Mounting plates Connecting fittings Depth adjustment of up to 550 mm facilitates the machining of large workpieces Interchangeable drilling units provide the capability of adapting hole patterns and save resetting time. Workpieces are machined quickly and in full. Hinges: Drill holes / press-in type Mounting plates: Drill holes / press-in type Connecting fittings: Drill holes / press-in type Runners: Drill holes System 32 hole lines: Drill holes Optional extension fences for increasing workbench size Pneumatic hold-down clamp for fixing workpiece Interchangeable System 32 drilling unit with continuation stops for drilling hole lines quickly and conveniently 18
21 Basic Plus Fast and straightforward setting of the drilling depth Straightforward machine setting for quickly optimising various work operations Optimum travel for drilling and inserting Shorter distances for hole-line drillings with continuation stop Surface for holding tool and fittings Digital display of hole pattern to the accuracy of one tenth of a millimetre Basic Plus The 5-spindle horizontal drilling unit allows you to drill holes for connecting fittings and wooden dowels at one and the same time Technik für Möbel 19
22 Basic Plus Technical brief: 250 Motor power rating of vertical drilling unit: 1,6 kw (2,1 PS) Motor power rating of horizontal drilling unit: 0,75 kw (1 PS) Voltage: 380 Volt, 3 -phase Insertion pressure at 6 bar: 296 kg Weight without horizontal drilling unit: 95 kg Weight with horizontal drilling unit: 118 kg Diameter of connection for chip extractor: 100 mm Volumetric flow: 141 m 3 / h Air consumption: 1,2 litres / lift Work bench: 800 x 970 mm Recommended base-unit height: 950 mm
23 Basic Plus Blue Max Modular Basic Plus with horizontal drilling unit without horizontal drilling unit Interchangeable drilling unit for System 32, 19 spindles Interchangeable drilling unit for System 32, 19 spindles with quick-change chuck Interchangeable drilling unit for System 32, 9 spindles Interchangeable drilling unit for System 32, 9 spindles with quick-change chuck Interchangeable drilling unit for hinges Interchangeable drilling unit for hinges with quick-change chuck Interchangeable drilling unit VB with quick-change chuck Press-in frame for interchangeable drilling unit hinge and connecting fitting Set of continuation stops for interchangeable drilling unit hinge and connecting fitting Additional hold-down clamp for horizontal drilling unit Extension set for hold-down clamp set Insertion dies Hinge range sensys Hinge ranges Intermat, Ecomat, Slide-on Hinge range Selekta Pro Connecting fittings VB 18 / 19 / 20 / Connecting fittings VB Drawer front connections MultiTech For drill bits, see pages Centre stop, width 235 mm Centre stop, short, width 195 mm Right-hand tilt stop for dimensioned extension fence Left-hand tilt stop for dimensioned extension fence Pendulum stop for left / right-hand dimensioned fence mm scaled fence extension mm unscaled fence extension Basic Plus Kit for converting from hand operation to foot operation Laser with 3D ball-head holder D aluminium holder Further accessories, see pages Technik für Möbel 21
24 Basic Interchangeable drilling units provide the capability of adapting hole patterns and save resetting time. Workpieces are machined quickly and in full. Hinges: Drill holes / press-in type Mounting plates: Drill holes / press-in type Connecting fittings: Drill holes / press-in type Runners: Drill holes System 32 hole lines: Drill holes Pneumatic hold-down clamp for fixing workpiece Optional extension fences for increasing workbench size Interchangeable System 32 drilling unit with continuation stops for drilling hole lines quickly and conveniently 22
25 Basic Fast and straightforward setting of the drilling depth Straightforward machine setting for quickly optimising various work operations Optimum travel for drilling and inserting Shorter distances for hole-line drillings with continuation stop Surface for holding tool and fittings Basic The 5-spindle horizontal drilling unit allows you to drill holes for connecting fittings and wooden dowels at one and the same time Technik für Möbel 23
26 Basic 800 Technical brief: 950 Motor power rating of vertical drilling unit: 1,6 kw (2,1 PS) Motor power rating of horizontal drilling unit: 0,75 kw (1 PS) Voltage: 380 Volt, 3 -phase Insertion pressure at 6 bar: 296 kg Weight without horizontal drilling unit: 75 kg Weight with horizontal drilling unit: 98 kg Diameter of connection for chip extractor: 80 mm Volumetric flow: 141 m 3 / h Air consumption: 1,2 litres / lift Work bench: 800 x 700 mm Recommended base-unit height: 950 mm
27 Basic Blue Max Modular Basic with horizontal drilling unit without horizontal drilling unit Interchangeable drilling unit for System 32, 19 spindles Interchangeable drilling unit for System 32, 19 spindles with quick-change chuck Interchangeable drilling unit for System 32, 9 spindles Interchangeable drilling unit for System 32, 9 spindles with quick-change chuck Interchangeable drilling unit for hinges Interchangeable drilling unit for hinges with quick-change chuck Interchangeable drilling unit VB with quick-change chuck Press-in frame for interchangeable drilling unit hinge and connecting fitting Interchangeable drilling unit for System 32 hole line, hinge and connecting fitting, 8 spindles Press-in frame for interchangeable drilling unit, 8 spindles Set of continuation stops for interchangeable drilling unit hinge and connecting fitting Additional hold-down clamp for horizontal drilling unit Extension set for hold-down clamp set Insertion dies Hinge range sensys Hinge ranges Intermat, Ecomat, Slide-on Hinge range Selekta Pro Connecting fittings VB 18 / 19 / 20 / Connecting fittings VB Drawer front connections MultiTech For drill bits, see pages Centre stop, width 235 mm Centre stop, short, width 195 mm Right-hand tilt stop for dimensioned extension fence Left-hand tilt stop for dimensioned extension fence Pendulum stop for left / right-hand dimensioned fence mm scaled fence extension mm unscaled fence extension Basic Kit for converting from hand operation to foot operation Laser with 3D ball-head holder D aluminium holder Further accessories, see pages Technik für Möbel 25
28 Interchangeable drilling unit for System 32 hole line For depthwise hole-line drillings and hardware drillings Suitable for equipping with continuation stops Number of spindles 9 without quick-change chuck without quick-change chuck with quick-change chuck with quick-change chuck spindles R L R L R L R L R 32 8 x 32 = spindles L R L R R R L R L x 32 = 576 Continuation stop For Blue Max Modular interchangeable drilling unit with 8, 9 or 19 spindles set Needs to be ordered separately For drill bits, see page
29 Interchangeable drilling unit for System 32 hole line with 5 spindles For automatic hole lines drillings Adapted for working with pneumatic caterpillar drive for automatic lateral traversal Article without quick-change chuck with quick-change chuck R L R L R 32 4 x 32 = 128 Interchangeable drilling unit for System 32 hole lines / hinges / connecting fittings with 8 spindles For automatic drilling and insertion machine Blue Max Modular Basic For drilling depthwise hole lines and hardware holes For TH 53 and T 43 hinge hole pattern Ready-prepared for fitting press-in frames Suitable for fitting continuation stops R L R L R L 5,5 32 R R Blue Max Modular Kombi press-in frame, interchangeable drilling unit for System 32 hole line / hinge / connecting fittings with 8 spindles For fitting with Blue Max insertion dies, see page Technik für Möbel 27
30 Interchangeable drilling unit for hinges For TH 53 and T43 hinge hole pattern, e.g. sensys, Intermat, Ecomat and Slide-on hinge ranges (interchangeable drilling unit for other hinge hole patterns on request) Prepared for press-in mounting frame Further hinge hole patterns on request Article without quick-change chuck with quick-change chuck C L R L 5,5 52 Interchangeable drilling unit for System 32 hole line with 4 spindles With quick-change chuck for fast changeover E.g. for mounting VB connecting fittings, InLine mounting plates for hinges, MultiTech drawer-front connectors etc. Prepared for press-in mounting frame L R L 32 Blue Max Modular press-in frame Can be used with Blue Max Modular interchangeable drilling units, hinge and System 32 hole line with 4 spindles For fitting with Blue Max insertion dies
31 Stop support For mounting to Blue Max Modular Advanced / Advanced Plus and Professional drilling and insertion machines For optionally reinforcing stop profile in conjunction with long workpieces set System 32 hole-spacing bar For mounting to Blue Max Modular Advanced / Advanced Plus and Professional drilling and insertion machines For actuating side adjustment facility on the machine (System 32) in conjunction with cam set, order no , see below Set of cams For mounting to System 32 hole-spacing bar, order no , see above Set of 10 individual cams set Individual cam with clamping block For mounting to Blue Max Modular Advanced / Advanced Plus and Professional drilling and insertion machines For optionally upgrading number of cams Technik für Möbel 29
32 Centre stop Blue Max Modular Left and right-hand stop with independent threads for individual positioning Length mm Pendulum stop for fence Right-hand / left-hand Tilt stop for fence Article Right Left Laser with 3D ball-head holder For exact positioning of workpieces with marked hole pattern Easy to install, battery-operated (1 x AA, 1,5 V or storage battery 1,2 V) Black plastic D aluminium holder For optional conversion of plastic 3-D ball-head holder
33 Elbow lever For fixing workpiece firmly in place Mounts to side of table profiles Clamping lever For fitting to depth adjustment facility on Blue Max Basic Plus / Advanced Plus and Professional drilling and insertion machines For locking a latch lever in any setting for depth position Cam setting gauge For positioning cams for hole-line unit with 9 and 19 spindles For Blue Max Advanced / Advanced Plus and Professional drilling and insertion machines Insertion dies Insertion die for Hinges from sensys range with TH 53 and TB 53 cup Hinges from Intermat, Ecomat and Slide-on range with T 43 cup Hinges from Selekta Pro 2000 range with T 23 cup Connecting fittings VB 18 / 19 / 20 / Connecting fittings VB Drawer front connections MultiTech Technik für Möbel 31
34 Work top extension Length 2000 mm Can be used for left and right Article Fence with scale Fence without scale Plastic profile, red Foot switch for Blue Max Modular For optionally retrofitting to Blue Max Modular Basic and Basic Plus For converting from hand operation to foot operation Metal support for Blue Max Modular Basic Optional upgrade for holding tools and fittings Drilling pins Turning clockwise and anticlockwise = can be used on both sides! Outstanding service life, similar to diamond-tipped drill bits Long resharpening zone Length 57,5 mm Shaft diameter 10 mm Diameter mm 8, , , , ,
35 Solid tungsten carbide tipped drill bits For less drilling effort Easily resharpened Enhanced drill-bit rigidity and stability Drilling direction marked in colour right = black, left = orange Length 57 mm Shaft diameter 10 mm Diameter mm right left 40, , , , , , , , , , Set of drill bits VB 18 / 19 / 20 / 21 1 x 30 mm right / 2 x 10 mm left set Drill bits, tungsten carbide tipped Turning clockwise or anticlockwise Drilling direction marked in colour right = black, left = orange Length 57 mm Shaft diameter 10 mm Diameter mm right left 40, , ,0 (without centring pin) , , , , , , , , , , , , , , , , , , , Drill bits, tungsten carbide tipped For socket drill holes Diameter 8 mm Length 50 mm Turning clockwise Shaft diameter 10 mm Drill bits, tungsten carbide tipped For horizontal boring unit Diameter 8 mm Length 70 mm Turning clockwise or anticlockwise Drilling direction marked in colour right = black, left = orange Shaft diameter 10 mm right left Spare quick-change chuck Version For standard machine chuck For quick-change chuck Technik für Möbel 33
36 Blue Max Modular HFT-03/2010 EN
Program overview Group 2
Program overview Group 2 2.1 Design principle System 2.1.0-2.1.3 2.2 Drilling and insertion machines Blue Max mini i Range summary 2.2.1 2.3 Assembly aids, drilling jigs and hole-marking templates i Range
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationThickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
More informationCOMPACT. Drilling COMPACT
COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.
More informationaccord 20 fx CNC machining centre
accord 20 fx CNC machining centre accord 20 fx CNC machining centre New-generation modular machining centre designed for machining operations involving heavy duty stock removal with high precision and
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationThe new design freedom for drawers DesignSide for InnoTech
The new design freedom for drawers DesignSide for InnoTech Technik für Möbel 2 Pure, unadulterated design for every taste Sleek lines that excite The home is an expression of personal lifestyle. More and
More informationSSG PRODUCTS FOR SHIPS AND OFFSHORE
6.1 SSG PRODUCTS FOR SHIPS AND OFFSHORE SSG workshop cabinets, tables and shelving system specially adapted to be used on-board ships and offshore. Developed in close cooperation with users from these
More informationINSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationSlides and Drawers. The right collection
Slides and Drawers The right collection 1Technical Details Drawer Runners Carrying capacity Kg. Static load Dynamic load Pag. 01 Concealed Runners Excel N Excel N Excel N Excel N650 Excel N Excel PlugIn,
More informationIntermat. Hinge technology of the highest order
Intermat Hinge technology of the highest order Intermat snap-on assembly hinge 2 Hinge technology of the highest order Intermat is Hettich s outstanding snap-on assembly hinge. Outstanding, because it
More informationDUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
More informationRemote Head REMO ONE. Code 5750. Manual
Remote Head REMO ONE Code 5750 Manual by sachtler. All rights reserved Version: 1.2/09/05 Issue date: September 2005 Order no.: srh20t010a We want you to receive Sachtler products that are always state
More informationDUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400
More informationMandrel system MIS. www.microcentric.de
Mandrel system MIS MicroCentric GmbH Berblingerstr. 16 71254 itzingen / Germany Tel.: +49 (0) 7156 17819-0 Fax: +49 (0) 7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this catalog:
More informationTRIMMING UNIT/DIAMOND MACHINE TST.13
TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.
More informationIncubator with mechanical convection
BF series 400 Incubators and cooling incubators Incubator with mechanical convection The BINDER incubator of the BF series with mechanical convection is suitable for all gentle incubation applications,
More informationLaserlyte-Flex Alignment System
Laserlyte-Flex Alignment System LaserLyte-Flex The LaserLyte-Flex Alignment System is a unique, interchangeable, low cost plug and play laser system. Designed specifically for aligning and positioning
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationYUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
More informationSECTION G2: CABLE PROCESSOR MODULE MAINTENANCE
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE Cable Processor Module overview WARNING! When tipping the Cable Processor Module back, (after removing the toggle arm pin), use extreme caution not to drop
More informationMachine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
More information1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
More informationOPTICAL MEASURING MACHINES
OPTICAL MEASURIN MACHINES SYLVAC SCAN Dedicated to the fast and contactless measuring of cylindrical parts, our new SCAN machines are based on the principle of the scanner. This technique allows to reproduce
More informationPrecision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
More informationCombi switchbox with integrated 3/2 way pilot valve
H Combi switchbox with integrated 3/2 way pilot valve Construction The GEMÜ combi switchbox with integrated 3/2 way pilot valve for pneumatically operated quarter turn actuators has a micro-processor controlled
More informationMaterial test chamber with mechanical convection
FP series 400 Material test chambers Material test chamber with mechanical convection A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and
More information1 table. Unlimited possibilities. The multifunction table arguably the most versatile workbench in the world.
1 table. Unlimited possibilities. The multifunction table arguably the most versatile workbench in the world. Ready for use everywhere: the new MFT 3 For some people, simply a table. Practical for setting
More informationResharpening Companion
Resharpening Companion 10950 Correct Angles, Pictures, and Step-By-Step Instructions The Resharpening Companion is meant to be a guide and quick reference to help you resharpen. It is not meant to replace
More informationACCESSORIES FOR TURNING
ACCESSORIES FOR TURNING Accessories for turning D140 D180 D210 D240 D250 D280 D320 D330 D360 D420 D460 D560 Plane clamping disk Ø 170 mm 344 0295 Plane clamping disk Ø 200 mm 344 0352 Plane clamping disk
More informationOPERATING INSTRUCTIONS FOR ELECTRODE SHARPENING MACHINE WIG 4
OPERATING INSTRUCTIONS FOR ELECTRODE SHARPENING MACHINE WIG 4 Original Please keep for further use! Kaindl-Schleiftechnik REILING GmbH, D-75203 Königsbach-Stein, Remchinger Str. 4 Germany Tel.: +49 7232/4001-0,
More informationThe Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
More informationBall valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be
More informationRAPID DIAL TEST INDICATORS
RAPID DIAL TEST INDICATORS The Verdict Rapid presents the dial face inclined to the workpiece surface ensuring good visual accessibility obviating parallax error. Rapids incorporate a rear swivel spigot
More informationDMS 680. Universal length measuring system gauge inspection for»iso 9000«requirements
DMS 680 Universal length measuring system gauge inspection for»iso 9000«requirements Universal length measuring system DMS 680 Wide range of applications For periodic inspection of gauges, reference gauges,
More informationPress Release. Turning/grinding center INDEX C200 Now also horizontal integration of grinding technology
Press Release Turning/grinding center INDEX Now also horizontal integration of grinding technology The is already one of the most successful machine series of INDEX in Esslingen, Germany. Its exceptionally
More informationMIKRON HPM 1150U HPM 1350U
MIKRON HPM 1150U HPM 1350U High performance milling versus high speed milling - the one cannot replace the other! While with high speed milling the objective is to create as much surface on the workpiece
More informationWorkspace and storage furnishings
LISTA Compact Workspace and storage furnishings NC storage and transport systems PROFSSIONALS AT WORK NC storage and transport systems made by LISTA give you the perfect solution for your tool logistics.
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationOperating Instructions Drill rig DRU160
Operating Instructions Drill rig DRU160 Index 000 / 001 Original operating instructions 10988825 en / 20.10.2009 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationTechnical Information
Technical Information This section of the catalogue provides technical information that will help specify, install and maintain Surelock McGill devices and components. The topics are listed below: Blast
More informationRouter Table Plans. www.bobsplans.com
www.bobsplans.com Router Table Plans Increase the capabilities of your router with this weekend project. Features a sliding fence with EZ-Mount clamps. These clamps are simple to make and grip tightly
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION P 1 / 5 Model No. Description 8390D Cordless Percussion Driver Drill 13mm CONCEPT AND MAIN APPLICATIONS Model 8390D has been developed by adding percussion mechanism to Model 6390D.
More informationCNC Portal Milling Machine FZ 50. CNC Power Milling Technology
CNC Portal Milling Machine FZ 5 CNC Power Milling Technology FZ 5 Portal Milling Machine for Heavy Cutting The newly developed portal milling machine FZ 5 is based on a flexible machine design which can
More informationBatibox TM flush-mounting boxes for dry partitions
flush-mounting boxes for dry partitions 800 51 800 42 800 53 800 54 800 42 + 800 71 800 77 Cat.Nos 1-gang boxes For 1 module 20 800 40 Drilling diameter 32 mm Depth 40 mm For 1 gang or 2 modules For wiring
More informationAwning Instructions. Full Cassette 1.5m to 6m
Awning Instructions Full Cassette 1.5m to 6m English Full Cassette Manual & Electric Instructions Contents Warning 1.5m - 3.5m Awnings 8 x Expansion bolts ** 2 x brackets 1 x Awning 1 x Winder 4.0m -
More informationOperating instructions for Electrode sharpening machine WIG 4
Operating instructions for Electrode sharpening machine WIG 4 Original Please keep for further use! Kaindl-Schleiftechnik REILING GmbH D-75203 Königsbach-Stein Remchinger Str. 4 Germany Tel.: +49 7232
More informationMachining Center Equipped with Unparalleled Rigidity and Agility NHX6300
Press Release Mori Seiki Co., Ltd. Head Office: 2-35-16 Meieki, Nakamura-ku, Nagoya City 450-0002, Japan TEL: +81(0)52-587-1830 FAX: +81(0)52-587-1833 January 24, 2013 Machining Center Equipped with Unparalleled
More informationSpeed-Mat Rectangle Cutter
Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.
More informationSaferand easierinstallation
EN 85-07 Saferand easierinstallation IföSigninstallationsystem andifösignbuilt-incistern www.ifosanitar.com/sign Aneffectivesolution withmanyadvantages. Ifö Sign installation system makes life a little
More informationProfile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
More informationAll-round interior organiser systems for office furniture Systema Top 1000 and OrgFrame
All-round interior organiser systems for office furniture Systema Top 1000 and OrgFrame eal values for the office: quality and convenience. A strong base is essential for great performance in the office.
More informationwork-piece guided processing system ROBOCELL 100 ROBOCELL 100 new processing options system safety modular construction
1.10 The work-piece guided processing system ROBOCELL 100 is a highly modular system solution provided by the house of CIMOTEC. The ROBOCELL 100 offers decisive benefits starting from small and simple
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
More informationWhirling Machine. New Dimension of Whirling Technology. Thread Whirling Machines. Big Workpiece Diameter. High Pitch Thread
LEISTRITZ PRODUKTIONSTECHNIK GMBH Thread Whirling Machines Whirling Machine New Dimension of Whirling Technology Big Workpiece Diameter High Pitch Thread Customer Satisfaction remains the Highest Priority
More informationFAG Hydraulic nuts. Technical Product Information
FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables
More informationRack installation instructions
Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:
More informationMaraMeter. Indicating Snap Gages
- 9-2 MaraMeter. Indicating Snap Gages Overview MaraMeter. The Indicating Snap Gage is ideal for highly accurate and reliable results on cylindrical work pieces with a narrow tolerance. MaraMeter 840 F
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationCatalogue. 2 Wheel Drive Tow Carts Model Part No Picture Description Packaging. www.helitowcart.com info@helitowcart.com +1.418.561.
Catalogue 2 Wheel Drive Tow Carts V90 151 0002 00 A Application: Economical version for R22, R44 & R66 only, on regular surfaces. Ideal for private owners that operate from local airport. With rigid arm
More informationVacuum drying oven for non-flammable solvents
VD series 53 Vacuum drying ovens Vacuum drying oven for non-flammable solvents A BINDER vacuum drying oven of the VD series is impressive while gently drying with its homogeneous temperature distribution.
More informationInstallation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-...
Installation guide for the SafeLine type anchorage device Tested in compliance with EN 795: 1996 No.: SE-... Version: 09.10.2008 SE 67 Subject to technical alterations! Contents 1. General information
More informationEZ-Steer Assisted Steering System
EZ-Steer Assisted Steering System Installation Instructions Platform Kit P/N 53059-54 Case IH CVX 1135 CVX 1145 CVX 1155 CVX 1170 CVX 1190 CVX 1195 CVX 135 CVX 145 CVX 155 CVX 175 CVX 195 New Holland TVT
More informationUltimate soft closing in any application: Silent System for Intermat hinges
Ultimate soft closing in any application: Silent System for Intermat hinges Ultimate soft closing in any application: Silent System for Intermat hinges 2 Intermat provides a broad product lineup for all
More informationK17.12 Door closers K17. Doors 01.09.2013
K17 Doors K17.12 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. OPTIC door closer TS40(V) with scissor
More informationPowers Controls TH 192 HC Heating/Cooling Room Thermostat
Powers Controls TH 192 HC Heating/Cooling Room Thermostat Technical Instructions Document No. 155-066P25 TH 192-2 50 60 70 80 70 TH0356R1 60 80 POWERS Description The TH 192 HC thermostats are proportional
More informationInForm Mobile Units. Selection. Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley
Selection Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley Basic mobile unit Basic mobile with vertical profiles Installation options Functional shelf, low Functional shelf, inclinable
More informationTA-A BED TYPE MILLING CENTRE
TA-A BED TYPE MILLING CENTRE TA-A BED TYPE MILLING CENTRE MILLING CENTRE HIGH CAPACITY IN A COMPACT MACHINE High stock removal capacity TA-A BED TYPE MILLING CENTRE 2 TA-A The TA-A milling centre is a
More informationEasy honeycomb processing. The comprehensive tooling range for machining honeycomb panels
Easy honeycomb processing The comprehensive tooling range for machining honeycomb panels Honeycomb panel suitable tools for each working step Ein System, viele Varianten. A requirement for todays wood
More informationElectron S.R.L. B55 CNC TRAINING MACHINES
Electron S.R.L. Design Production & Trading of Educational Equipment B55 CNC TRAINING MACHINES Specifications may change without notice Page 1 of 12 File B55 MODULAR TRAINING SYSTEM FOR THE STUDY OF CNC
More informationCNC Gantry-Processing Centers Vantage 100
CNC Gantry-Processing Centers The compact nesting machine in gantry design Our CNC processing centers are already offering the technology of the future. Why? Tradition.»Made in Germany«is our motivation
More informationAlfra Rotabest 100 Metal Core Drilling Machine. Operation Manual
Alfra Rotabest 100 Metal Core Drilling Machine Operation Manual 06/2005 1. Technical Data Prod. No.: 18630 Name : Rotabest 100 Input: Load rpm: 1800 Watt 110/175/245/385 rpm Tool Holder : MT 3 Coolant
More informationWorkspace and storage furnishings
LISTA Compact Workspace and storage furnishings Test and inspection workstations With its modular test and inspection workstations, LISTA offers optimised solutions for modern quality assurance practices.
More informationOriginal Assembly Guide
TCT Multipurpose Single Bevel Sliding Compound Mitre Saw Original Assembly Guide Read instructions before assembling this tool. Table of Contents GB Assembly Guide Read instructions before assembling this
More informationWeeke CNC Machining Center, Model BP-150 Optimat
Weeke CNC Machining Center, Model BP-150 Optimat Weeke's BP-150 is a truly industrial machine designed primarily for point-topoint boring and machining of flat components without special workpiece fixtures.
More informationCALIBRATION FOR LAL20X & LAL24X
CALIBRATION AND FAULT FINDING FOR LAL20X & LAL24X DUMPY LEVELS MEASURING EXPERTS SINCE 1869 How The LAL20X & LAL24X Works The Automatic level is called Automatic because it requires only a simple basic
More informationŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the
More information4.3-inch Back-Up Camera
TM 4.-inch Back-Up Camera Model No.: PKC0BU4 Owner s Manual and Warranty Information Read these instructions completely before using this product. Retain this Owner s Manual for future reference. INTRODUCTION
More informationALFRA Rotabest Piccolo 32/50 Weldon Metal Core Drilling Machine. Operation Manual
ALFRA Rotabest Piccolo 32/50 Weldon Metal Core Drilling Machine Operation Manual 06/2005 1 1. Technical Data Prod. No.: 18550 Name : Rotabest Piccolo 32/50 Weldon Input: Load rpm: 1050 Watt 400 rpm Tool
More informationProduct catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationPHA 2000 PHB 3000 EXIT PAD
PHA 2000 PHB 000 EXIT PAD Panic Hardware in Contur Design PHA 2000 PHB 000 EXIT PAD THE MODULAR PANIC HARDWARE-SSTEM IN CONTUR DESIGN Prior knowledge of how to open the escape door is not expected. DANGER
More informationDigital pressure gauge for industrial applications Model DG-10-S, Standard version Model DG-10-E, Enhanced version
Electronic pressure measurement Digital pressure gauge for industrial applications Model DG-10-S, Standard version Model DG-10-E, Enhanced version WIKA data sheet PE 81.66 Applications Machine building
More informationSICONT Limit Switches Type 3SE3 upto 500 VAC, 600 VDC, 10A
s SICONT Limit Switches Type 3SE3 upto 500 VAC, 600 VDC, 10A Introduction The technical and descriptive information on the function, construction and selection of the new types of 3SE3 limit switches is
More informationAtling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests
Atling proudly presents the next generation self centering steady rests ATLING Ockelbo Sweden AX Steady Rests 1 The New AX Steady Rest The Atling AX series is the result of several years of development
More informationThat s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance
[ That s ] E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250 Training reality with industrial performance Concept TURN 250 Uncompromising quality right down to the last bolt, at an unbeatable
More informationWeeke CNC Machining Center, Model BHC 550 NB
Weeke CNC Machining Center, Model BHC 550 NB Weeke's BHC-550 NB is a truly industrial machine designed primarily for boring and routing of flat components that have been nested into full sheets of material.
More informationPS6500 Storage Arrays Rack Mount Instructions
PS6500 Storage Arrays Rack Mount Instructions Part Number: R724M Rev. A01 Copyright 2010 Dell, Inc. All rights reserved. Dell is a trademark of Dell, Inc. EqualLogic is a registered trademark. All trademarks
More information18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre
More informationLarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves
LarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves As a rule, control and reduction valves of the globe type have an integrated plug that narrowly
More informationScrewdriver Function Module for the automatic Screw-Assembly
Screwdriving technology Automation Air motors Air tools Machine Building Components Screwdriver Function Module for the automatic Screw-Assembly wide product variety for all applications maximum ease of
More informationSET-UP AND INSTALLATION FOR LEAD SCREW CARTRIDGE ASSEMBLY
SET-UP AND INSTALLATION FOR LEAD SCREW CARTRIDGE ASSEMBLY 82-13-1 O-Ring (Rear) The Lead Screw Assembly is shipped separately. Note: Install Electrical and Pneumatic Circuitry. Be Sure electrical and pneumatic
More informationSYSTEM 4C. C R H Electronics Design
SYSTEM 4C C R H Electronics Design SYSTEM 4C All in one modular 4 axis CNC drive board By C R Harding Specifications Main PCB & Input PCB Available with up to 4 Axis X, Y, Z, A outputs. Independent 25
More informationStructureScan Installation
StructureScan Installation Contents Your StructureScan box is packed with the LSS-1 black box, a Power cable, StructureScan transducer, mounting bracket, 15 foot (4.5m) ethernet cable and a hardware kit.
More informationKey data. The practical machines for your specific grinding solution. A member of the United Grinding Group. The Art of Grinding.
The Art of Grinding. A member of the United Grinding Group CT450 / CT550 The practical machines for your specific grinding solution. Key data The CT450 / CT550 are very flexible internal cylindrical grinding
More informationSpring Cage Feed-Through Terminal Blocks ST
Spring Cage Feed-Through Terminal Blocks ST The product family ST with the new spring cage system "mini spring" is extremely space-saving. Space is saved thanks to a clearly smaller spring system without
More information