Piping. Body ported. Base mounted. Specifications. Air/Inert gas Maximum operating pressure. 1.0 MPa Minimum operating pressure
|
|
- Vernon Flowers
- 7 years ago
- Views:
Transcription
1 Port Solenoid Valve Metal Seal Series 00 Large flow capacity Low power consumption:. W ( ma, VDC) Plug connector One-touch wiring of plug connectors Common pilot exhaust subplate mounted and manifold JIS Caution Base mounted For Safety Instructions and Solenoid Valve Precautions, refer to pages -- to --. Model Piping Base mounted Specifications Type of actuation N.C. N.O. N.C. N.O. Choice of pilot valve exhaust Individual exhaust Common exhaust type provides both individual exhaust and common exhaust. Fluid Air/Inert gas Maximum operating pressure.0 MPa Minimum operating pressure 0. MPa Proof pressure. MPa Ambient and fluid temperature 0 to 0 C Lubrication Not required Enclosure Dusproof () Push type (Safety style), Locking type (Tool required), Locking type (Manual) Shock/Vibration resistance (m/s ) 0/0 () Specifications Port size Flow characteristics (P A) (A R) Type C[dm /(s bar)] b Cv C[dm / ( s bar)] b Cv Max. operating frequency (c/s) (AC/DC) () Response time (ms) (AC/DC) () Weight (kg) () Option N.C. valve N.O. valve M / or less 0.0 Base mounted (With sub-plate) N.C. valve N.O. valve Rc / / or less 0. Note ) Minimum operating frequency: as per JIS B (Once in 0 days) Note ) Based on JIS B - (Supply pressure; 0. MPa; without surge voltage suppressor) Note ) Value for grommet (Sub-plate weight: 0.0 kg) Note ) Note ) and Note ) are with controlled clean air. Note ) Based on JIS C 00 Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Solenoid Specifications Option Electrical entry Coil rated voltage (V) Grommet (G), Plug connector (L), Plug connector (M), DIN terminal (D) AC 0/0 Hz 00, 00,,, 0, 0 DC,,, Allowable voltage fluctuation (%) to +0% of rated voltage Coil insulation type Class E or equivalent (0 C) () Temperature rise ( C) or less Power consumption (W) DC. (With indicator light:.) Apparent power (VA) AC Inrush Holding Surge voltage suppressor () Indicator light./0 Hz,./0 Hz./0 Hz, /0 Hz DC: Diode, AC: ZNR DC: LED (Red), AC: Neon bulb Note ) In the case of grommet type, it is equipped on the middle of lead wire. Note ) Based on JIS C 00 Description Part no. Note Foot bracket (With screw) () 000-A- For M AN0-M Noise reduction: db or more (ø x l ) Silencer R / () AN0-0 Noise reduction: db or more (ø x l ) Note ) For body ported type Note ) For sub-plate mounted type -- V00 SY SYJ VK VT VG S00 VQ VKF VQZ VS VFN
2 Series 00 Series 00 Type of actuation N.C. (Normally closed) N.O. (Normally open) Base mounted Body type Individual pilot exhaust Common pilot exhaust Common pilot exhaust Rated voltage 00 VAC, 0/0 Hz 00 VAC, 0/0 Hz 0 VAC, 0/0 Hz 0 VAC, 0/0 Hz VDC VDC Other Option G Light/Surge voltage suppressor Z S None (Indicator light is not available for grommet type.) Electrical entry G: Grommet, Lead wire length 00 mm How to Order M With surge voltage suppressor (Grommet type) DOZ is not available. L: L plug connector, With lead wire B C Option F Foot bracket U Silencer K Foot bracket + Silencer Only body ported type Port size M Base mounted 0 Push type (Safety style) Locking type (Tool required) Locking type (Manual) LN: L plug connector, Without lead wire Without sub-plate Rc / LO: L plug connector, D: DIN terminal H: Grommet, Lead wire length 00 mm M: M plug connector, With lead wire MN: M plug connector, Without lead wire MO: M plug connector, DO: DIN terminal, Type G, L and M : Lead wire 00 mm --
3 Port Solenoid Valve Metal Seal, Body Ported/Base Mounted Series 00 Construction () N.C. () N.O. () V00 SY SYJ VK VT Component Parts No. q w e Description Body Spool/Sleeve Piston Material Aluminum die-casted Stainless steel Polyacetal Note Platinum silver Replacement Parts No. Description Material r Return spring Stainless steel t y O-ring Seal u O-ring i O-ring o Mini Y seal!0 Round head combination screw Carbon steel! Round head combination screw Carbon steel! Pilot valve assembly Part no. SCZ - - VG S00 VQ VKF VQZ VS VFN --
4 Series 00 Construction (Sub-plate mounted) N.C. () N.O. () Component Parts No. q w e r Description Body Spool/Sleeve Piston Sub-plate Material Aluminum die-casted Stainless steel Polyacetal Aluminum die-casted Sub-plate Assembly Part No.: 00-S-0 Mounting bolt and gasket are not attached. Note Platinum silver Platinum silver Replacement Parts No. Description Material t y Return spring Gasket Stainless steel u O-ring i Seal o O-ring!0 O-ring! Mini Y seal! Round head combination screw Carbon steel! Round head combination screw Carbon steel! Round head combination screw Carbon steel! Pilot valve assembly Note SCZ - - How to Order Pilot Valve Assembly G H L LN LO M MN MO D DO Series 00 Grommet L plug connector M plug connector DIN terminal SCZ G Electrical entry 00 mm lead wire 00 mm lead wire With lead wire Without lead wire With lead wire Without lead wire With connector Z S B C Push type (Safety style) Locking type (Tool required) Locking type (Manual) Light/Surge voltage suppressor None With surge voltage suppressor Indicator light is not available for grommet type. DOZ is not available. Pilot pressure exhaust Spacer side exhaust (Type 0) Body side exhaust (Type 0, 0) Rated voltage 00 VAC, 0/0 Hz 00 VAC, 0/0 Hz 0 VAC, 0/0 Hz 0 VAC, 0/0 Hz VDC VDC Other Option --
5 Port Solenoid Valve Metal Seal, Body Ported/Base Mounted Series 00 Dimensions: Body Ported Grommet: - GH(S)-M With foot bracket: - -M-F -ø. mounting hole (Locking type (Manual)) (Locking type (Tool required)) -ø. mounting hole Locking type manual override L plug connector: - L(Z)-M DIN terminal: - D(Z)-M -ø. mounting hole Applicable cable O.D. ø. to ø Pg -ø. mounting hole -ø. mounting hole. G: 00 H: 00 Lead wire length V00 SY SYJ VK VT VG S00 VQ VKF VQZ VS VFN M plug connector: - M (Z)-M.. Max ø. mounting hole --
6 Series 00 Dimensions: Sub-plate Mounted Grommet: - G H (S)-0 -ø. mounting hole Locking type manual override G: 00 H: 00 Lead wire length (Locking type (Manual)) (Locking type (Tool required)) L: - L(Z)-0 DIN terminal: - D(Z)-0 Applicable cable O.D. ø. to Max.0 Pg M: - M(Z)-0.. PE PA.. -Rc / --
7 Series 00 Manifold Specifications Manifold Variations: VVZ VVZ Series 00 Manifold 0 0 Manifold specifications/single base type B mount (P/E port size) S0 VVZ-0-0 VVZ-0-0- VVZ-0-0- VVZ-0-0-C How to Order Manifold Base 0 stations 0 stations P, E port Piping Port size Rc / (Individual pilot exhaust) Rc / (Common pilot exhaust) Base mounted (Common pilot exhaust) Rc / A port direction: Opposite side of solenoid valve Base mounted (Common pilot exhaust) Rc / A port direction: Same side of solenoid valve 0 Model Manifold type Single base, B mount Passage Common SUP/EXH type Valve stations Max. 0 stations Manifold base model VVZ-0 VVZ-0 VVZ-0 VVZ-S0 Individual exhaust Common exhaust Common exhaust Common exhaust Built-in One-touch fittings Built-in One-touch fittings (A) port P, E port Applicable valve model Blanking plate Type S0 is available only with built-in One-touch fittings. Pilot valve exhaust Piping direction/ Location Port size Port size Model VVZ-0 VVZ-0 VVZ-0 -S0 Specifications Passage specifications Porting Applicable base (P) (R) (A) Common Common Top, Side Type 0, 0 and 0 Applicable valve model Top/Valve Rc / - -M - -M V00-A- V00-A- Part no. BG-0 BG-0 BG-0 Side/Base (Opposite side of solenoid), Rc / Screws and Gasket Assembly Part No. C, C Rc / - - Base mounted (Without sub-plate) V00-A- V00-A- (A) port size on base side Model VVZ-0 VVZ-S0 Without (A) port ( type 0, 0) M 0 C C Rc / Built-in One-touch fittings Applicable tubing O.D. ø Built-in One-touch fittings Applicable tubing O.D. ø VVZ-S0: Only C and C Side/Base (Same side of solenoid) C, C Instruct by specifying the valves, blanking plate option to be mounted on the manifold along with the manifold base model no. And for the order of valves installation or option s position, instruct separately by the manifold specification sheet. (Example) <Top ported, individual pilot exhaust> <Side ported, common pilot exhaust> VVZ-0-0 ( stations) VVZ-00-C ( stations) -G-M pcs. -M pcs. -G-M pcs. -M pcs. V00-A- pc. (Blanking plate) <Side ported, common pilot exhaust> VVZ ( stations) -G pcs. -G pcs. V00-A- pc. (Blanking plate) V00 SY SYJ VK VT VG S00 VQ VKF VQZ VS VFN --
8 Series 00 Dimensions: Individual Exhaust/Common Exhaust Individual exhaust: VVZ-0 -ø. mounting hole (G) (L) (M) (D). -Rc /.. Max.0 Common exhaust: VVZ-0 L L n: Formula L = n + L = n + (G) (L) (M) (D) n- -ø. mounting hole P E PE... Max. 0 -Rc / -Mx0. L L n: Formula L = n + L = n + --
9 Port Solenoid Valve Metal Seal, Body Ported/Base Mounted Series 00 Dimensions: Common Exhaust Individual: VVZ-0 -ø. mounting hole Common exhaust: VVZ-0 (Built-in One-touch fittings manifold) -ø. mounting hole L L L Common exhaust: VVZ-S0 (Built-in One-touch fittings manifold) Manual override L side R side (G) (L) (M) 00 -ø. mounting hole L (G) (L) (M) 00 0 (G) (L) (M) (Lead wire length) 0 (D) With light surge voltage suppressor With light surge voltage suppressor -Mx0. (D) 0 -Mx0. EPE P n: Formula L = n + 0 L = n + n: Formula L = n + L = n + (D) Max.0. -Rc /.. Max.0 0 -Rc / - -Rc / PE.. Max.0 0 V00 SY SYJ VK VT VG S00 VQ VKF VQZ VS VFN L L 0 0 n: Formula L = n + L = n + --
10 0 Port Solenoid Valve Metal Seal Series 00 Large flow capacity Low power consumption:. W ( ma, VDC) Plug connector One-touch wiring of plug connectors Common pilot exhaust subplate mounted and manifold JIS --0 Base mounted Model Specifications Solenoid Specifications Option Type of Choice of pilot valve exhaust Piping actuation Individual exhaust Common exhaust N.C. N.O. N.C. Base mounted N.O. type provides both individual exhaust and common exhaust. Fluid Air/Inert gas Maximum operating pressure.0 MPa Minimum operating pressure 0. MPa Proof pressure. MPa Ambient and fluid temperature 0 to 0 C Lubrication Not required Enclosure Dustproof () Push type (Safety style), Locking type (Tool required), Locking type (Manual) Shock/Vibration resistance (m/s ) 0/0 () Specifications Port size Flow characteristics (P A) (A R) Type C[dm /(s bar)] b Cv C[dm /(s bar)] b Cv Max. operating frequency (c/s) (AC/DC) () Response time (ms) (AC/DC) () Weight (kg) () Note ) Minimum operating frequency: As per JIS B (Once in 0 days) Note ) Based on JIS B - (Supply pressure; 0. MPa; without surge voltage suppressor) Note ) Value for grommet (Sub-plate weight: 0.0 kg) Note ) Note ) and Note ) are with controlled clean air. Note ) Based on JIS C 00 Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Option Electrical entry Grommet (G), Plug connector (L), Plug connector (M), DIN terminal (D) Coil rated voltage (V) AC 0/0 Hz 00, 00,,, 0, 0 DC,,, Allowable voltage fluctuation (%) to +0% of rated voltage Coil insulation type Class E or equivalent (0 C) () Temperature rise ( C) or less Power consumption (W) DC. (With indicator light:.) Apparent power (VA) AC Inrush Holding Surge voltage suppressor () Indicator light./0 Hz,./0 Hz./0 Hz, /0 Hz DC: Diode, AC: ZNR DC: LED (Red), AC: Neon bulb Note ) In the case of grommet type, it is equipped on the middle of lead wire. Note ) Based on JIS C 00 Description Foot bracket (With screw) () R / Silencer R / () N.C. valve N.O. valve Rc / / or less 0. Note ) For body ported type Note ) For sub-base mounted type Base mounted (With sub-plate) N.C. valve N.O. valve Rc /, / / or less 0.0 Part no. Note 000-A For AN0-0 Noise reduction: db (ø x l ) AN0-0 Noise reduction: db (ø x l )
11 Port Solenoid Valve Metal Seal, Body Ported/Base Mounted Series 00 Series 00 Type of actuation N.C. (Normally closed) N.O. (Normally open) Base mounted Body type Individual pilot exhaust Common pilot exhaust Common pilot exhaust Rated voltage 00 VAC, 0/0 Hz 00 VAC, 0/0 Hz 0 VAC, 0/0 Hz 0 VAC, 0/0 Hz VDC VDC Other Option Construction () N.C. () G Light/Surge voltage suppressor Z G: Grommet, Lead wire length 00 mm H: Grommet, Lead wire length 00 mm How to Order None (Indicator light is not available for grommet type.) S With surge voltage suppressor DOZ is not available. Electrical entry 0 L: L plug connector, With lead wire M: M plug connector, With lead wire Type G, L, and M : Lead wire 00 mm B C Port size 0 Base mounted 0 0 LN: L plug connector, Without lead wire MN: M plug connector, Without lead wire N.O. () Option F Foot bracket U Silencer K Foot bracket + Silencer Only body ported type Push type (Safety style) Locking type (Tool required) Locking type (Manual) Rc / Without sub-plate Rc / Rc / LO: L plug connector, MO: M plug connector, D: DIN terminal DO: DIN terminal, V00 SY SYJ VK VT VG S00 VQ VKF VQZ VS VFN Component Parts No. q w e Description Body Spool/Sleeve Piston Material Aluminum die-casted Stainless steel Polyacetal Note Platinum silver Replacement Parts No. Description Material r Return spring Stainless steel t y O-ring Seal u O-ring i O-ring o O-ring!0 Mini Y seal! Round head combination screw Carbon steel! Round head combination screw Carbon steel! Pilot valve assembly Note SCZ
12 Series 00 Construction: Sub-plate Mounted N.C. () N.O. () Component Parts No. q w e r Description Body Spool/Sleeve Piston Sub-plate Material Aluminum die-casted Stainless steel Polyacetal Aluminum die-casted Sub-plate Assembly Part No.: 00-S- Mounting bolt and gasket are not attached. Note Platinum silver Platinum silver 0 0 Replacement Parts No. Description Material t y Return spring Gasket Stainless steel u O-ring i Seal o O-ring!0 O-ring! O-ring! Mini Y seal! Round head combination screw Carbon steel! Round head combination screw Carbon steel! Round head combination screw Carbon steel! Pilot valve assembly Part no. SCZ - - How to Order Pilot Valve Assembly SCZ G G H L LN LO M MN MO D DO Series 00 Grommet L plug connector M plug connector DIN terminal Electrical entry 00 mm lead wire 00 mm lead wire With lead wire Without lead wire With lead wire Without lead wire With connector B C Z S Push type (Safety style) Locking type (Tool required) Locking type (Manual) Light/Surge voltage suppressor None With surge voltage suppressor Indicator light is not available for grommet type. DOZ is not available. Pilot pressure exhaust Spacer side exhaust (Type 0) Body side exhaust (Type 0, 0) Rated voltage 00 VAC, 0/0 Hz 00 VAC, 0/0 Hz 0 VAC, 0/0 Hz 0 VAC, 0/0 Hz VDC VDC Other Option --
13 Port Solenoid Valve Metal Seal, Body Ported/Base Mounted Series 00 Dimensions: Body Ported Grommet: - G H (S)-0 With foot bracket: - -0-F -ø. mounting hole -ø. mounting hole (Locking type (Manual)) G: 00 H: 00 Lead wire length (Locking type (Tool required)) -ø. mounting hole Foot bracket V00 SY SYJ VK VT -Rc / VG S00 Locking type manual override VQ VKF L - L(Z)-0 DIN terminal: - D(Z)-0 VQZ -ø. mounting hole Applicable cable O.D. ø. to ø VS VFN Pg M plug connector: - M(Z) ø. mounting hole. 0 -ø. mounting hole Max.0. --
14 Series 00 Dimensions: Sub-plate Mounted Grommet: - G H (S) ø. mounting hole Locking type manual override G: 00 H: 00 Lead wire length (Locking type (Manual)) (Locking type (Tool required)) L plug connector: - L(Z)- 0 0 DIN terminal: - D(Z)- 0 0 Applicable code O.D. ø. to Pg. M plug connector: - M(Z)- (Lead wire length) Rc/, / Max.0. --
15 Series 00 Manifold Specifications Manifold Variations: VVZ VVZ-0-0 VVZ Series 00 Manifold VVZ-0-0- VVZ-0-0-C 0 VVZ-0-0 How to Order Manifold Base 0 Manifold specifications/single base type B mount (P/E port size) S0 Piping 0 0 stations 0 stations (Individual pilot exhaust) (Common pilot exhaust) Base mounted (Common pilot exhaust) (A) port direction: opposite side of solenoid valve Base mounted (Common pilot exhaust) (A) port direction: same side of solenoid valve Model (A) port P, E port Applicable valve model Blanking plate P, E port Port size Rc / Rc / Rc / Rc / Passage (P) (R) Specifications Type S0 is available only with built-in One-touch fittings. Manifold type Passage Valve stations Manifold base model VVZ-0 VVZ-0 VVZ-0 VVZ-S0 Individual exhaust Common exhaust Common exhaust Common exhaust Built-in One-touch fittings Built-in One-touch fittings Pilot valve exhaust Piping direction/ Location Port size Port size Model VVZ-0 VVZ-0 VVZ-0 -S0 Applicable valve model Top/Valve Rc / Rc / -0-0 V00-A- V00-A- Part no. BG-0 BG-0 BG-0 Porting specifications (A) Common Common Top, Side Applicable base Type 0, 0 and 0 Side/Base (Opposite side of solenoid) Rc/, / Screws and Gasket Assembly Part No. Single base, B mount Common SUP/EXH type Max. 0 stations C, C Rc / - - Base mounted (Without sub-plate) V00-A- V00-A- Side/Base (Same side of solenoid) C, C A port size on base side Model VVZ-0 VVZ-S0 Without (A) port ( type 0, 0) 0 Rc / 0 Rc / Built-in One-touch fittings C Applicable tubing O.D. ø Built-in One-touch fittings C Applicable tubing O.D. ø VVZ-S0: only C & C. Instruct by specifying the valves, blanking plate option to be mounted on the manifold along with the manifold base model no. And for the order of valves installation or option s position, instruct separately by the manifold specification sheet. (Example) <Top ported, common pilot exhaust> <Side ported, common pilot exhaust> VVZ-0-0 ( stations) VVZ-S0-0-C ( stations) -G-0 pcs. -L pcs. -G-0 pcs. -L pcs. V00-A- pc. (Blanking plate) <Side ported, common pilot exhaust> VVZ ( stations) -G pcs. -G pcs. V00-A- pc. (Blanking plate) V00 SY SYJ VK VT VG S00 VQ VKF VQZ VS VFN --
16 Series 00 Dimensions: Individual Exhaust/Common Exhaust Individual exhaust: VVZ-0 -ø. mounting hole P= n-rc / -Rc / (G) (L) (M) (D). -Rc /. E P Max.0 n: Common exhaust: VVZ-0 L L Formula L = n + L = n + 0 (G) (L) (M) (D) -ø. mounting hole Manual P = n-rc / -Rc / - - -Rc / -Rc / P PEE Max.0 -Rc / - ( port) n: L L Formula L = n + L = n
17 Port Solenoid Valve Metal Seal, Body Ported/Base Mounted Series 00 Dimensions: Common Exhaust Common exhaust: VVZ-0 (G) (L) (M) With light/surge voltage suppressor (D) -ø. mounting hole Common exhaust: VVZ-0 (Built-in One-touch fittings manifold) (G) (L) (M) -ø. mounting hole Manual override L L L L Common exhaust: VVZ-S0 (Built-in One-touch fittings manifold) (G) (L) (M) R side L side Manual override P = 0 ( ): A port Rc / P = L side Manual override (Nonlocking) R side -ø. mounting hole -Rc / -Rc / - - -Rc / -Rc / With light/surge voltage suppressor 0 With light/surge voltage suppressor -Rc / - -Rc / 0 With light/surge voltage suppressor - With light/surge voltage suppressor - - -Rc / (Lead wire length) (Lead wire length) With light/surge voltage suppressor -Rc / With light/surge voltage suppressor Rc/ 0... (D) P E PE n: Formula L = 0n + L = 0n + (D) -Mx Max.0 -. Max.0 -Rc / -Rc / - n: Formula L = n + L = n PE Rc / Max.0 V00 SY SYJ VK VT VG S00 VQ VKF VQZ VS VFN n: L L Formula L = n + L = n
18 Series 00/00 Precaution Be sure to read before handling. For Safety Instructions and Solenoid Valve Precautions, refer to page --. Caution Grommet Type Surge Voltage Suppressor Plug Connector Type AC DIN Terminal Type Coil DC Red For AC Coil Red Black For DC Diode Coil With indicator light (AC) Neon light Black Diode Coil Coil Marking Indicator light (Built in the connector) With indicator light (DC) Surge voltage suppressor (Built-in the terminal block) Coil Marking AC Attaching and detaching connectors. To attach a connector, hold the lever and connector unit between your fingers and insert straight onto the pins of the solenoid valve so that the lever s pawl is pushed into the groove and locks.. To detach a connector, remove the pawl from the groove by pushing the lever downward with your thumb, and pull the connector straight out. Molded coil Concave groove Pin Cover Lever DC indicator L type Socket part no. Pin DXT0-- Connector Lead wire Hook 0. to 0. mm Cover (Max. cover O.D.: Red ø. mm) Black M type DC coil color: +Red, Black Crimping the Lead Wire and Socket Peel. to. mm of the tip of lead wire, enter the core wires neatly into a socket and crimp it with a special crimp tool. Be careful so that the cover of lead wire does not enter into the crimping part. (Crimping tool part no.: DXT 0--) Core wire crimping area Molded coil Crimping area How to Use Plug Connector Core wire Lead wire In applications where the supply voltage is DC, correctly connect the lead wires to + (positive) and (negative) indications on the connector or to the markings. For those on which the lead wires have been pre-wired, the positive side is red and negative side is black. Connector assembly part no. DXT0 0 A Lead wire color With socket Lead wire Socket only ( pcs.) Note Without lead wire Blue () Red () Gray () For 00 VAC For 00 VAC Another VAC Red: +, Black: For DC Note) When ordering a valve with a lead wire of 00 mm or longer, be sure to indicate the model number of the valve without connector and connector assembly. Ex.) For lead wire length (000 mm) Solenoid valve: 0-M0-0 pcs. Connector assembly: DXT0-0-A-0 pcs. Lead wire length Lead wire length (mm) Neon bulb DC AC DC Diode With indicator light (AC) Varistor With indicator light (DC) Diode Coil Coil Coil Coil In the case of DC wiring, connect terminal no. of the connector to the positive [+] side, and terminal no. to the negative [ ] side. (Refer to the marks on the terminal board.) Hook Cover --
19 Series 00/00 Precaution Be sure to read before handling. For Safety Instructions and Solenoid Valve Precautions, refer to page --. Caution Attaching and detaching lead wires with sockets. Attaching Insert the sockets into the square holes of the connector (with + and indication) and continue to push the sockets all the way in until the lock by hooking into the seats in the connector. (When they are pushed in, their hooks open and they are locked automatically.) Then confirm that they are locked by pulling lightly on the lead wires.. Detaching To detach a socket from a connector, pull out the lead wire while pressing the socket s hook with a stick having a thin tip (approx. mm). If the socket will be used again, first spread the hook outward. Socket Hook Connector Lead wire How to Calculate the Flow Rate For obtaining the flow rate, refer to page --. How to Use Plug Connector Connector assembly with protective cover Connector assembly with protective cover enhances dust protection. Effective to prevent short circuit accidents due to penetration of foreign matter into the connector section. The material of cover is chloroprene rubber for electricity which is excellent in weathering and electrical insulating properties. But don t splash with cutting oil. Simple and unencumbered appearance by adopting round-shaped cord. How to Order DXT0 A Lead wire length Lead wire length L (mm) Dimensions: Connector Assembly with Cover Red Black Black Polarity indication V00 SY SYJ VK VT VG S00 VQ VKF VQZ VS VFN --
20 Series 00/00 0 Precaution Be sure to read before handling. For Safety Instructions and Solenoid Valve Precautions, refer to page --. Caution Connection. Loosen the set screw and pull out the connector from the terminal block of the solenoid.. Pull out screw and insert a screwdriver to the slit area near the bottom of terminal block to separate block and housing.. Loosen the terminal screws (slotted screws) on the terminal block, insert the core of the lead wire into the terminal in accordance with the prescribed connection method, and attach securely with the terminal screws.. Tighten the ground nut to secure the wire. Change of electrical entry (Orientation) After separating terminal block and housing, the cord entry direction can be changed by attaching the housing in the desired direction ( directions in 0 increments). In the case of w/indicator light, avoid damaging the indicator light with lead wire. Precautions Plug a connector in or out vertically, never at an angle. Applicable cable O.D.: ø. to ø (Reference) 0. mm core and core wires equivalent to JIS C 0. How to Wire DIN Terminal Ground nut Tightening torque. to. N m Washer Grommet (Rubber) (Voltage symbol) Refer to the table below. Terminal screw ( locations) Tightening torque 0. to 0. N m Holding screw Tightening torque 0. to 0. N m Housing (Position for light mounting) Terminal block Shaved part DIN Terminal Part No. Without indicator light DXT0-- With Indicator Light Rated voltage Voltage symbol Part no. 00 VAC 00 VAC 0 VAC 00V 00V 0V DXT0---0 DXT0---0 DXT VAC 0V DXT VAC VDC VDC VDC VDC 0V VD VD VD VD DXT0---0 DXT0--- DXT0---0 DXT0---0 DXT0--- Circuit with Indicator Light AC circuit DC circuit NL: Neon bulb R: Resister D: Protective diode LED: Light emitting diode R: Resistor --0
3 Port Solenoid Valve
Port Solenoid Valve Series V00 Rubber Seal Power consumption 0. W (with power saving circuit) VV0 VV00 V00 -V F VS temperature rises: C (with power saving circuit) Sonic conductance Series Standard Large
More information5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Compact and lightweight: 26.4 mm
More information3 Port Solenoid Valve
ubber Seal ort Solenoid Valve Series SYJ00/00/700 [Option] SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M.
More informationInrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00.
Port Direct Operated Solenoid Valve Series VS5/0 Metal Seal Multiple pressure supply is possible with balanced spool sleeve. Any given port can accept high or low pressure supply without affecting the
More information2 position single. (Standard) 100V AC 50/60Hz 200V AC 50/60Hz 24V DC. 2 position double
4/ Port Solenoid Valve Rubber Seal VZ1000/000/000 Solenoid Valve Variations Port Size Effective area (mm 2 ) Position solenoid Voltage Electrical entry Option/ Indicator light and surge voltage suppressor
More information0.35 0.9. 3 Port Solenoid Valve. Series VQZ100/200/300. Compact, High Flow. Power consumption: 0.35 W/0.9 W SYJ VQZ VP VG VP3
Port Solenoid Valve 00/00/00 Metal Seal Rubber Seal 0. 0.9 (Standard) (High pressure type, High speed response type) Power consumption: 0. W/0.9 W Compact, High Flow Body ported Base mounted 00 00 00 00
More information5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported. Flow characteristics 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2)
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Model position position Type of actuation
More information1.8 w 101.2. 3 Port Solenoid Valve Direct Operated Poppet Type. New. Series VT307 CAT.ES11-107A. Power consumption
Port Solenoid Valve Direct Operated Poppet Type Power consumption Vacuum applications New [Option] RoHS 4 Standard wtype (Existing product: 4.8 W) 0. kpa Energy-saving type.8 w (Existing product: W) A
More informationSpecifications. Model Flow type Pressure type. Air Maximum operating pressure. 1.0 MPa Ambient and fluid temperature. 3% F.S.
Electro-Pneumatic Proportional Valve Series /VEP Electro-pneumatic proportional valve: Flow type () Controls the flow rate steplessly according to current. (It is a / port valve that has an electrical
More informationLCD Readout Digital Pressure Switch
LCD Readout Digital Pressure Switch Series ZSE3 (For )/E3 (For Positive Pressure) For General Pneumatics Easy pressure setting with the digital display RoHS Can be integrated with a vacuum unit, Series
More informationElectrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
More informationSingle sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
More information5 Port Solenoid Valve
Metal Seal ort Solenoid Valve Series VQ7-6/7-8 Rubber Seal ISO Standard Size /Size VQ7-8/Single unit.6 VQ7-8/Manifold. Conforms to ISO standard /I Interface conforms to ISO standard Size (VQ7-6) and Size
More information3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
More informationLine-Mounted Valves L Series
Spare Part Kit for Valve Series B1LSAD3 Line-Mounted L Series Accessories Spare Part Kits All Series Valve Series B1LSAD3 40.1609 Incl. O-rings, gaskets, spring or muffl er Spare Part Kit for Valve Series
More informationRPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
More informationValve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
More information5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve
5.0 Ma ilot Operated /3 ort Solenoid Valve & Check Valve Series VCH VCH4/4: ort VCH40: 3 ort VCHC40: Check Valve ilot Operated ort Solenoid Valve [Option] Series VCH40 Stable responsiveness Response time
More informationNAMUR Mount Hygienic Valve
NF097-D NMUR Mount Hygienic Valve For Wash Down pplications Series VFN Features Engineered Plastic PPS Body (Polyphenylene Sulfide) provides high temperature and chemical/corrosion resistance for use in
More informationAssisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
More information3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large
More informationtype V46, solenoid or pneumatic operated
SPECIFICATION general type of construction spool valve operator solenoid or pneumatic operated or by manual override. Manual override is equipped with a monostable function (push) and a bistable function
More informationSensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm
Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders
More informationFluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
More informationPA5. Series. Quick-Connect Cables with Connectors. Simplifies sensor wiring. Wide variety of connectors attached to cables.
Quick-Connect Cables with Connectors PA Simplifies sensor wiring. Wide variety of connectors attached to cables. Series No wiring or staking work needed Shorter replacement time in unlikely event of sensor
More informationDirect Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
More informationSolenoid valves Type EVU
Data sheet Solenoid valves EVU EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and pilot operated versions, they can be applied in liquid, suction, and hot
More informationSeries VM. Mechanical Valves VM200. VM1000 Side ported 11 x 36 x 16 Bottom ported 11 x 28 x 25
Mechanical Valves Series VM Model Dimensions (mm) VM1000 Side ported 11 x 36 x 16 Bottom ported 11 x 28 x 25 VM100 Side ported 17 x 44 x 25 Bottom ported 17 x 44 x 30 VM200 25 x 40 x 52 One way roller
More informationValves. Sub-Base Mounted Valves to ISO 5599/2
Valves Sub-Base Mounted Valves to ISO 5599/2 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service life. Due to the great
More informationCable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
More information2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
More information4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
More informationProportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
More informationProcess Valve. 2 Port Valve For Compressed Air and Air-hydro Circuit Control
Process Valve Series VN Port Valve For Compressed ir and ir-hydro Circuit Control Exclusively for air pressure system and air-hydro circuit control Universal Port Valve [Option] Cylinder actuation by external
More informationSTC 3S012-020-A Series Solenoid Valves
STC 3S012-020-A Series Solenoid Valves 3S012-020-A Series Solenoid Valve Specifications Valve Model 3S012-1/8-A 3S012-1/4-A 3S020-1/8-A 3S020-1/4-A Port Size (NPT) 1/8 1/4 1/8 1/4 Valve Type Action 3 Way,
More information4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
More informationONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
More informationTS93 EMR T/PT/TDE. Surface applied door closer
TS EMR T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer with smoke detector (EMR T) Push side track mount door closer with smoke detector (EMR PT) Double
More information2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
More informationG1/4 Q8. Standard with biased position
Contents Version Actuation Page Characteristics Dimensions x / Way Valves pneumatic 6,7, 0 9 electric 6,7 9, 9 / Way Valves pneumatic 6,7, 0 electric 6,7, 0 / Way Valves pneumatic 6,7,, 6, 7 electric 6,7,,
More information3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
More information3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
More informationSystem 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
More informationSolenoid Valve Island Type 3965
Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and
More informationElectro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
More informationElectro-Pneumatic Bus Door Control Mechanism
Electro-Pneumatic Bus Door Control Mechanism Application and Feature 1. Pneumatic Door Mechanism actuates the open/close movements of bus door through two double acting cylinders and two linkages with
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,
More informationClear Glass Sensor. Ordering Information E3S-CR67/62. Optimum Sensor for Detecting Transparent Glass and Plastic Bottles
Clear Glass Sensor Optimum Sensor for Detecting Transparent Glass and Plastic Bottles E3S-CR67/62 Retroreflective Sensor smoothly detects 5-mm gaps. Detects transparent bottles that have a lens effect.
More informationOutdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
More information97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: G/, / NPT, NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve > > Manual
More informationCartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)
Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers
More informationCapacitive Prox E2K-X
Capacitive Prox Threaded, Cylindrical Sensor Detects Metallic and Non-metallic Objects Permits non-contact detection of metallic and non-metallic objects such as glass, wood, water, oil and plastic Allows
More informationINSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate
More informationModel Number Structure
General-purpose Relay G2RS Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped with
More informationDirectional seated valves type VP 1
Directional seated valves type VP 1 zero leakage, intended for general hydraulic applications and grease lubing systems Flow Q max Operation pressure p max = 15 lpm = 400 bar Individual valve Individual
More information% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power
.55 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 W low wattage coil Standard
More informationElectro-hydraulic pressure switches type DG
Electro-hydraulic pressure switches type DG Pressure p max = 700 bar See also: For electronic pressure switches type DG 5 E see D 5440 E Analogous pressure transducer type DT 1 see D 5440 T Analogous pressure
More informationCross-beam scanning system to detect slim objects. 100 mm 3.937 in
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
More information33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection
More informationD2QW D2QW-@@@@@- @ - @ 1 2 3 4 5 6 7. Sealed long stroke slide-contact switch for reliable ON/OFF action even in severe environmental conditions.
Sealed long stroke slide-contact switch for reliable ON/OFF action even in severe environmental conditions. Extra-long stroke even without levers. (:.7 mm) Clip contacts with highly reliable slide contact
More informationIMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
More informationWE-350 Series ¼ Turn Electric Actuator
WE-350 Series ¼ Turn Electric Actuator Operation and Installation Manual Pg 1 (Rev. 020113) Table of Contents 1.0 General 1.1 Pre-Installation Inspection 1.2 Storage 1.3 Features & General Information
More informationAir Catch Sensor. Series ISA. For Workpiece Placement Confirmation
Air Catch Sensor Series For Workpiece Placement Confirmation No-contact sensor for confirming workpiece placement, with a configuration that is less affected by supply pressure change. Easy-to-set-up LED
More informationAdjustment functions for both span and shift have been incorporated
SENSORS FOR SERIES LED Type Wafer Alignment Sensor FX-0-F FT-F9 FD-F7 EX-F70/F60 M SH-7 FD-L4 M-DW The use of a safe LED light beam now allows for high precision detection with a resolution of 0!m (.8
More informationUM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted
U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils
More informationGROENEVELD AUTOMATIC GREASING SYSTEMS
GROENEVELD AUTOMATIC GREASING SYSTEMS TWIN Parts & Accessories Book Pumps, Fittings, Injectors, Lining, etc. www.groeneveld-group.com 1 TWIN ELECTRICAL Item Part # Description 1 F113966 Switch 24V 2 F122991
More informationDIAMOND Retractable Rodding Robot Model SPRAYROD-R
2004-12-21 2 1 (23) DIAMOND Retractable Rodding Robot Model SPRAYROD-R 2004-12-21 2 2 (23) Table of contents 1 TECHNICAL DESCRIPTION...4 1.1 MAIN DETAILS...5 1.2 COMPONENTS DESCRIPTION...5 1.2.1 Pneumatic
More informationHL-5000. Economical, Miniature Limit Switch Boasting Rigid Construction. General-purpose Limit Switch. Model Number Structure.
General-purpose Limit Switch CSM DS_E_3_ Economical, Miniature Limit Switch Boasting Rigid Construction The Head, Box, and Cover mate with ridged surfaces to maintain strength. A unique Head structure
More informationD2SW-P. Sealed Subminiature Basic Switch. Ordering Information
Sealed Subminiature Basic Switch Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealing by using rubber packing means the switch can be used in dust-proof
More informationUM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves
U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking
More informationProportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32
www.atos.com Table F040-1/E Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32 AGMZO are two stage poppet type proportional
More informationLinear Luminaire with LED Series EXLUX 6402/2
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More informationLong sensing range. Most suitable for conveyor lines and parking lot applications. 10 m 32.808 ft (Red LED)
NX SERIES Compact Multi-voltage Photoelectric Power Supply Built-in Multi-voltage photoelectric sensor usable worldwide Conforming to ow Voltage and EMC Directive Multi-voltage The NX series can operate
More informationSolenoid Valve Type 3962
Solenoid Valve Type 362 x d, x em or without explosion protection, for controlling pneumatic actuators General The Type 362 Solenoid Valve ensures a high level of operational reliability for controlling
More informationTQ SMD RELAYS TQ SMD LOW-PROFILE SURFACE-MOUNT RELAY FEATURES SPECIFICATIONS
LOW-PROFILE SURFACE-MOUNT RELAY RELAYS.55 5.6. FEATURES Low-profile: 6 mm.36 inch (Tape height: max. 6.5 mm.56 inch) Tape and reel package is available as standard packing style Surge withstand between
More informationSolenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
More informationS GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
More informationOEM Manual MODEL 2350 ELECTRONIC DUAL CYLINDER SCALE
OEM Manual MODEL 2350 ELECTRONIC DUAL CYLINDER SCALE Scaletron Industries, Ltd. Bedminster Industrial Park 53 Apple Tree Lane P.O. Box 365 Plumsteadville, PA 18949 USA Toll Free: 1-800-257-5911 (USA &
More informationU-shaped Micro Photoelectric Sensor
SERIES U-shaped Micro Photoelectric Extremely small size enables space saving and quick installation! Extremely small Ultra-small type PM- 24(-R) contributes to the miniaturization of your equipment. Even
More informationPrecision Regulator. Series IR1000/2000/3000 ARJ AMR ARM ARP IR IRV VEX1 SRH SRP SRF ARX20 VCHR ITV IC PVQ VER VEA VY2 AP100.
Precision Regulator Series // Basic Type Air Operated Type Series Model Regulating pressure range Page Series Series Series Series Series.5 to MPa. to MPa. to.8 MPa /8 55.5 to MPa. to MPa /4 55. to.8 MPa.
More information3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
More information3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
More informationHS5D. Miniature Interlock Switches First in. Head Removal Detection Function for Safer Performance. First in. the Industry.
y HS5D First in the Industry Miniature Interlock Switches First in the Industry Head Removal Detection Function for Safer Performance (*based on IDEC research, July 09) New Generation Miniature Interlock
More information3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control
More informationModel Number Structure
General-purpose Relay G2RS Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped with
More informationSmall U-shaped Micro Photoelectric Sensor. Enables space saving and quick installation!
4 Small Micro Photoelectric Amplifier Built-in PM-44 SERIES PM-4 SERIES General terms and conditions... F- selection guide... P.44~ Related Information Glossary of terms / General precautions... P.39~
More informationCooling system components, removing and installing
Engine BHW Cooling system components, removing and installing Page 1 / 24 19-1 Cooling system components, removing and installing Warning! When doing any repair work, especially in the engine compartment,
More informationzamak nitrile rubber self-extinguishing technopolymes aluminum
G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions
More informationSolid-State Timer H3G
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-11000(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Solid-State Timer Low-Cost, Plug-In
More informationOrdering Information. Cylindrical Proximity Sensor E2E/E2E2
Cylindrical Sensor E2E/E2E2 A New Series of Easy-to-use and Tough E2E/E2E2 Models Long-size E2E2 Sensor Conforms to CENELEC Ideal for a variety of applications. With a metal connector that can be tightened
More information2.12. page 223 2.12. Products for Explosion hazardous Environment
2.12 page 223 2.12 Products for Explosion hazardous Environment Non-electric valves for explosion 2.12.1 page 224 hazardous environment The following manually and mechanically actuated valves are available
More informationDANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationRY2 miniature industrial relays
6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,
More informationRadiant Temperature Sensor TY7321
AB-5361-U Specifications/Instructions Radiant Temperature TY7321 General TY7321 Radiant Temperature s are designed to measure infrared radiation from perimeter windows and walls and provide a proportional
More informationSignaling Lights. LH Series Surface Mount Indicators. Part Numbers. Jumbo Dome (one color) Jumbo Dome (two color)
Innovative indicators in a slim & stylish design. uces installation space. LH Series Surface Mount Indicators Key features of the LH series include: Direct mounting on surfaces such as panels, aluminum
More informationP7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc
P7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc Installation Timing Pin Location CAUTION: Before installing the injection pump, be sure that number 1 cylinder is at the Top Dead Center
More informationENGINE FUEL FUEL FILTER... FUEL HEATER... INJECTOR... SUPPLY PUMP... COMMON RAIL... FUEL PRESSURE LIMITTER...
FUEL FILTER............................ FUEL HEATER.......................... INJECTOR.............................. SUPPLY PUMP.......................... COMMON RAIL.......................... FUEL PRESSURE
More information