STANDARD ARCHITECTURAL BASES

Transcription

1

2 STANDARD ARCHITECTURAL BASES ANCHOR BASES Available for smaller poles of 3, 4 & 5 diameters. Bases accommodate ¾ diameter anchor bolts and are stainless steel shot blasted for uniform color and finish. (dia.) AB lbs. 3/4 6 3 Base - ¾ s AB lbs. 3/4 7 4 Base - ¾ s AB lbs. 3/4 7½ 5 Base - ¾ s HEAVY DUTY ANCHOR BASES (dia.) AB-8-S 2240-S 11.9 lbs. 1-1¼ HD Base / Bore AB-8-T 2240-T 10.7 lbs. 1-1¼ HD Base / 8 Tapered Core AB-10-S 2159-S 19.0 lbs. 1¼ HD Base / Bore AB-10-T 2159-T 17.1 lbs. 1¼ HD Base / 10 Tapered Core AF lbs. 1½ 17½-18½ 12 HD Base / 12 Tapered Core AB lbs. - - AB 8-10 AF-12-BC lbs. - - for AF-12 Base ANCHOR BASES Available for pole sizes 6 through 12 in diameter. All 10 bases are available for 1 or 1¼ anchorage in either a straight bore or a tapered as cast I.D. All bases are drilled and tapped for ¼ -20 N.C. to accept the appropriate bolt covers. (4 covers per base) All bases are stainless steel shot blasted for uniform color and finish. Part AF lbs Base / 5.03 Cast lbs Base / Bore lbs Base / Bore lbs Base / Bore S 2264-S 8.59 lbs. 1¼ Base / Bore T 2264-T 7.77 lbs. 1¼ Base / Tapered Core lbs. 1¼ Base / Bore S 2367-S lbs. 1¼ Base / Bore T 2367-T 8.50 lbs. 1¼ Base / Tapered Core lbs Base lbs. 1½ 15-16½ 8 Base / Bore S S lbs Base / Bore S S lbs. 1¼ Base / Bore T T lbs Base / Tapered Core T T lbs. 1¼ Base / Tapered Core C lbs Base

3 ARCHITECTURAL HINGED BASES & COVERS SQUARE BASES (without half cover castings) Available for pole diameters 3 through 5. All square bases are heat treated to a T6 condition for ultimate strength and reliability. Half covers are also available. (see below) Half 395-SQ 2285-B 4.48 lbs. 3/4 dia. 8-9½ 3 SQ. BASE Optional * ALL INSIDE SQUARES ARE DIE SIZED.03 OVER NOMINAL / SQUARE BASE HALF COVERS When ordering half covers they are shipped as a set of two (2), with four (4) ¼ - 20 U.N.C. x ½ LG. Stainless Steel Flat Head Hex-Socket Vandal Cap Screws Approximate Wt. (ea. half) Base Inside 395-SQ-C 2285-C 1.48 LBS 9 1/8 x 2 1/2 3 SQ. HALF COVER ROUND HINGED BASES (without half cover castings) Available for pole diameters 3 through 5. All round bases are heat treated to a T6 condition for ultimate strength and reliability. Half covers are also available. (see below) Half 395-RD-HB 2290-HB 5.24 lbs. 3/4 dia. 7 dia. 3 Hinged Base Optional 495-RD-HB 2291-HB 4.91 lbs. 3/4 dia. 7 dia. 4 Hinged Base Optional 595-RD-HB 2292-HB 6.48 lbs. 3/4 dia. 8½ dia. 5 Hinged Base Optional * ALL DIAMETERS ARE BORED.03 OVER NOMINAL / ROUND BASE HALF COVERS When ordering half covers they are shipped as a set of two (2), with four (4) ¼ - 20 U.N.C. x ½ LG. Stainless Steel Flat Head Hex-Socket Vandal Cap Screws Approximate Wt. (ea. half) Base Inside 395-RD-C 2290-C 1.29 lbs. 9 3/8 x 2 1/2 3 RD. HALF COVER 495-RD-C 2291-C 1.25 lbs. 9 3/8 x 2 1/2 4 RD. HALF COVER 595-RD-C 2292-C 1.52 lbs. 10 7/8 x 2 1/2 5 RD. HALF COVER HINGED BASES Available to accommodate both round and square poles, sizes 4 through 6. This two piece design base is shipped completely assembled and swings a full 90. In addition the base comes standard with stainless steel hardware, and is held in a vertical position by (3) ½ - 13 x 3 S.S. countersunk allen head bolts. Castings are stainless steel shot blasted for uniform surface finish and color. 4SQ-2728-H lbs. 5/8-3/4 7½ SQ HINGED BASE 4RD-2728-H lbs. 5/8-3/4 7½ RD HINGED BASE 5SQ-2728-H lbs. 5/8-3/4 9 5 SQ HINGED BASE 5RD-2728-H lbs. 5/8-3/4 7½ RD HINGED BASE 6RD-2728-H lbs. 5/8-3/4 8½ RD HINGED BASE MANUFACTURED IN THE U.S.A BY: AKRON FOUNDRY COMPANY 2728 Wingate Ave. Akron, Ohio Phone: (330) Fax: (330) afc@akronfoundry.com Website:

4 ROUND BASES STANDARD ARCHITECTURAL BASES R lbs. 3/4 dia. 6¾ 4 RD. BASE A R lbs. 3/4 dia. 7¾ 4½ RD. BASE A R lbs. 3/4 dia. 7¾ 5 RD. BASE A R lbs. 3/4 dia. 8¾ 6 RD. BASE A * All round bases listed above require four (4) size A vandal resistant covers. SQUARE BASES (FIXED) lbs. 3/4 dia. 8½ 4 SQ. BASE A lbs. 3/4 dia. 10½ 5 SQ. BASE A lbs. 1 dia SQ. BASE C * All square bases listed above require four (4) vandal resistant covers. SQUARE BASES (SLOTTED) S lbs. 3/4 dia. 8½ - 9½ 4 SQ. BASE B S lbs. 3/4 dia. 10¾ - 11½ 5 SQ. BASE B S lbs. 1 dia SQ. BASE D S lbs. 1 dia SQ. BASE D * All square bases listed above require four (4) vandal resistant covers. Available for pole sizes 4 through 6.65 square. Bases are shipped complete with vandal resistant covers and can be ordered with slotted bolt circle diameters. Counterbores are machined for covers to ensure trouble free installation. Bases are stainless steel shot blasted for uniform surface and color. A special enlarged counter-bore is available for bases requiring painting. (consult factory) TB-1-8 BASES Available for 8 diameter pole sizes, the TB-1 bases may be ordered for use with T - Base mounting (BM) or ground mounting (GM) applications. All bases are stainless steel shot blasted for uniform color and finish. VANDAL RESISTANT COVERS A dia. B dia. C dia. D dia. TB lbs. 1 dia Base Tapered Core (BM) Hex N/A TB lbs. 1 dia Base Tapered Core (GM) C TB lbs. 1 dia Base 8.04 Bore (BM) Hex N/A TB lbs. 1 dia Base 8.04 Bore (GM) C TB lbs. 1¼ dia Base Bore N/A Bases are shipped complete with vandal resistant covers and can be ordered mac hined with either fixed or slotted bolt circle diameters. Counterbores are machined to ensure trouble free installation. Bases are stainless steel blasted for uniform surface finish and color. A special enlarged counterbore is available for bases requiring painting (Consult Factory) * When vandal resistant covers are required on painted bases, order P (PAINTED) after base part number.

5 PEDESTAL BASES - POLES - CAPS - WASHERS ROUND PEDESTAL BASES TS lbs. 1 dia. 10½ dia. B.C. 6 Dia. Pedestal Base SQUARE PEDESTAL BASE TS lbs. ¾ or 1 dia. 12¾ dia. TS-1000L 2328-L lbs. ¾ or 1 dia. 12¾ dia. Standard 4 NPT Threaded Pedestal Base 4 NPT Threaded Pedestal Base with extended neck TS-1000 MODIFIED lbs ¾ or 1 dia dia. Standard 4 NPT Threaded Pedestal Base with Modified Base Available with aluminum or plastic door. If required (3) ⅜-16 N.C. stainless steel set screws. POLE CAPS Part POLE SIZE P-1000 Domed Cap lbs. 4.0 dia. 4 Dia. Press Fit Pole Cap TS-1000 ACORN CAP lbs 4.0 dia. 4 Dai. Pole Cap (with 3 Set Screws) Caps available with or without set screws. WASHERS Dim. OD x ID X Thickness AF-W8.305# ea. 2½ dia. X 13/16 ID X.25 Thk. Zinc Mechanical Deposit Per ASTM B Class 50 AF-W9.275# ea. 2½ dia. X 1 1/16 ID X.25 Thk. 4 THREADED ALUMINUM PIPE Zinc Mechanical Deposit Per ASTM B Class 50 Pole 2328 X Required Length (0 TO 20 long) 4.5 dia. Schedule 40 4 NPT Threaded Material: 6061 T6. Uniform brushed satin finish. MANUFACTURED BY: AKRON FOUNDRY COMPANY 2728 Wingate Ave. Akron, Ohio Phone: (330) Fax: (330) afc@akronfoundry.com Website:

6 MISCELLANEOUS FLAGPOLE COMPONENTS REVOLVING TRUCKS All truck assemblies are burnished for uniform finish. Part Pipe Thread Rod Mounting Hole Bearing Type ½ ¼ NPT ½-13 N.C. Single Truck Assembly ⅝ ¼ NPT ⅝-11 N.C. Single Truck Assembly ½ ¼ NPT ½-13 N.C. Double Truck Assembly ⅝ ¼ NPT ⅝-11 N.C. Double Truck Assembly Ball Bearing STATIONARY SINGLE TRUCK All trucks assemblies burnished for a uniform finish. Part Cap Inside Diameter Rod Mounting Hole Bearing Type ½-13 N.C. Stationary Single Truck N/A INTERNAL REVOLVING HALYARD WITH BRUSH FINISHED COVER. Part Pipe Thread Rod Mounting Hole 8970-½ ¼ NPT ½-13 N.C. Internal Revolving Halyard 8970-⅝ ¼ NPT ⅝-11 N.C. Internal Revolving Halyard Bearing Type Chromed Plated 1 ½ NPT X 1 ¼ NPT REDUCER AVAILABLE: CONSULT FACTORY STANDARD HAND-HOLE CASTINGS Part SIZE AF5 x X lbs. Hand-hole Casting AF6 x X lbs. Hand-hole Casting AF6 x X lbs. Hand-hole Casting AF7 x X lbs. Hand-hole Casting AF7 x x lbs. Hand-hole Casting AF8 x X lbs. Hand-hole Casting AF10 x X lbs. Hand-hole Casting AF X LBS. Hand-hole Casting