Hardware and Fastening Components

Transcription

1 and Fastening Components Safe Load 40 Series Standard with T-slot Nut 40 Series Heavy with T-slot Nut 40 Series Heavy with T-Nut HD,500 N (560 lbs) 5,000 N (1,15 lbs) 8,000 N (1,800 lbs) Pull Test Two pieces of 40x40 Heavy profile were assembled to form a tee with a standard fastener and a button head screw. Force was applied until the tee started to separate. The profile failed before the fastener. The profiles were still held together at the end of the test. There were no catastrophic failures. Extra screw length beyond standard 0mm did not significantly change test results. Engaged Force Screw length N Lbs M8x0 15 mm 4,954 5,609 M8x5 0 mm 5,354 5,699 M8x30 5 mm 6,777 6, Houston, TX 77066

2 T-Slot Nut St Self-Aligning T-Slot Nut Locating the T-slot nut using the spring/ball locking feature for easy locating and mounting on vertical profiles. Universal mounting element for profiles. 40, 30 and 0 series nuts can be inserted into profile T-slot at any location. Positive location using ball/spring thrusting mechanism. Metric - clear zinc plated English - black zinc plated Parts designated with SS at the end are stainless steel * Due to the almost identical geometric and dimensional shape of M5 and #10-3 UNF threads, standard #10-3 screws will fit in all M5 T-slot nuts. 8 series T-slot nut slides into profile slot from end face of profile. Profile Dimensions (mm) Weight Series A B C D E (g) Part # M5* , Inquire about quantity discounts M SS M SS 1/ / M M M M5* Rolls into the profile T-slot 40 at any location. Held in position using spring-loaded ball. Raised area fits into T-slot to prevent twisting. The nut should not be used in applications where the raised area might interfere with other object such as aligment tabs on universal fasteners, hinges, etc. The nut also fits T-slot 8 and 30 but must be inserted from the profile end. Self-Aligning T-Slot Nut 40, M6 1pc 10 g Self-Aligning T-Slot Nut 40, M8 1pc 10 g Houston, Tx 77066

3 Double T-Slot Nut Double T-slot Nut 40, M8/40 used for fastening 1 Joining Plates, Gusset Brackets, 3 Floor Mtg Brackets, 4 Base Plates, 5 Hinges, 6 Parts Bins and 7 Profile Slide Blocks 8 Dbl. T-slot Nut 40, M8/4 used for fastening 7 8 Medium Hinge 40 Universal mounting element for wide variety of applications where fastening hardware requires two M8 T-slot nuts. Roll-in T-slot nuts and can be inserted into the profile T-slot at any location, use with 40 and 30 series profiles. Heavy duty T-slot nut must be inserted from the profile end, use with 40 series profiles only. T-Slot Nut HD Double T-Slot Nut M8/4 1 pc 15 g Double T-Slot Nut M8/40 1 pc 3 g Double HD T-Slot Nut 40 1 pc 5 g T-Slot Nut HD, M6 1 pc 13 g T-Slot Nut HD, M8 1 pc 13 g Retainer Spring for HD T-Slot Nut pkg of Inquire about quantity discounts 64 For loads requiring heavy duty support on 40 series heavy profiles. Recommended for mounting Bearing Units. Houston, TX 77066

4 Economy T-Slot Nut Standard Offset Economic solution for fastening various hardware to profiles. Economy T-slot nut slides into profile from end face. T- slot nuts can be secured in vertical positions with compression spring. Standard Steel, Metric - zinc plated English - black oxide SS - stainless steel * Due to the almost identical geometric and dimensional shape of M5 and #10-3 UNF threads, standard #10-3 screws will fit in all M5 T-slot nuts. Profile Dimensions (mm) Weight series A B C D (g) Part # M M M SS 5/ / SS 1/ M M SS 30, 8 M / / / SS 0 M M5* Offset 40 30, 8 A B C D E Weight Part # M / M / Description Unit Part # Compression Spring, for Economy T-slot Nuts M6 pkg/ Compression Spring, for Economy T-slot Nuts M8 pkg/ Economy Drop-In T-Slot Nut For attaching small parts and accessories to 40, 30 and 8 series profiles. Can be inserted into T-slot at any location. For light duty applications only. Economy Drop-In T-Slot Nut, M6 1 pc 4 g Houston, Tx 77066

5 T-Slot Nut Zn For positioning on vertical profiles, the T-slot Nut is preset. Fastening is effected by tightening the tapered T-slot Nut Zn. 1 Insert Turn 3 Fasten Universal mounting element. Wedges into the profile when tightened. Can be inserted into T-slot at any position. Zn cast, galvanized * Due to the almost identical geometric and dimensional shape of M5 and #10-3 UNF threads, standard #10-3 screws will fit in all M5 T-slot nuts. Dimensions (mm) Weight Series A B C D E (g) Part # M M M5* M , 8 M M5* Inquire about quantity discounts T-Bolt 40 Conveniently threaded stud with T-slot nut for insertion into T-slots of 40 series profiles. Used to attach equipment and fixtures to profiles. T-Bolt 40 M8x5 1 pc 1 g T-Bolt 40 M8x40 1 pc g Houston, TX 77066

6 Pin Element Anodize Breaker T-Slot Bar Prevents dislocation under high loads on 40 series profiles. Recommended use in pairs. Drill profiles for 5.9mm diameter. Includes cup point set screw M6x1 and pull dowel, 6x16 DIN Dislocation stability of the connection per element = max. 3000N (675 lbs.) Pin Element 1 set 34 g 0-00 For penetrating anodizing and providing grounding continuity between 40, 50 and 30 series profiles. St, galvanized with dog point set screw M6x1 Anodize Breaker 1 pc 3 g Fastening element for easy attachment of valves, limit switches and peripherals. Bar stock for custom length T-slot nuts on 40 series profiles. T-slot Bar St (0-059) also used on 30 series profiles. 0-03: Al, clear anodized Max. tapped hole: M5 (#10-3) 0-059, 0-06: St Max. tapped hole: M8 (5/16 ) T-Slot Bar Al 1 pc.11 kg 0-03 T-Slot Bar St 1 pc.6 kg T-Slot Bar HD 1 pc.4 kg Houston, Tx 77066

7 45 Series T-Slot Nut 45 Universal mounting element for 45 series profiles. Can be inserted into 10mm T-slot at any location. insert turn & tighten Color : M5, M8 - silver M6 - gold T-Slot Nut 45, M5 1 pc 7 g T-Slot Nut 45, M6 1 pc 7 g T-Slot Nut 45, M8 1 pc 7 g HD T-Slot Nut 45 Universal mounting element for 45 series profiles. HD T-Slot nut slides into profile from end face. HD T-Slot Nut 45, M5 1 pc 19 g HD T-Slot Nut 45, M6 1 pc 0 g HD T-Slot Nut 45, M8 1 pc 18 g T-Bolt 45 Threaded stud with head that fits into 10mm T-slot. Used to attach equipment and fixtures to 45 series profiles. Can be inserted into thet-slot at any location. 5 Includes hex flange lock nut. T-Bolt 45, M8x5 1 set 1 g T-Bolt 45, M8x30 1 set 1 g Houston, TX 77066