Section #1 Pictorial Table Of Contents. Material Strength Profile. Page 662. Page 663. Phone: Fax:
|
|
- Ross May
- 7 years ago
- Views:
Transcription
1 How To Order Profile Section # Pictorial Table Of Contents Metric Part Naming Metric Page 639 Page 64 Page 642 Page 643 Page 644 Page 645 Pages Series T-Slotted Aluminum Profiles Profile Compatibility Code Profile Material Strength Beam Deflection Torque Specifications Profile Specifications T-Slotted Aluminum Profiles Page 650 Page 65 Page Series T-Slotted Aluminum Profiles Profile Profile Profile Profile Profile Profile Profile Page 653 Page 654 Page 655 Page 656 Page 657 Page 658 Page Profile Profile Profile Profile Profile Page 660 Page 66 Page 662 Page 663 Page Series T-Slotted Aluminum Profiles Profile Profile Profile Page 665 Page 666 Page 667 Phone: Fax:
2 T-Slotted Aluminum Profiles Section # Pictorial Table Of Contents 40 Series T-Slotted Aluminum Profiles Lite Profile Profile Profile Profile Profile Profile Lite Profile Page 668 Page 669 Page 670 Page 67 Page 672 Page 673 Page Profile Profile Profile Lite Profile Profile Profile Lite Profile Page 675 Page 676 Page 677 Page 678 Page 679 Page 680 Page Profile Lite Profile Lite Profile Lite Profile Lite Profile Profile Profile Page 682 Page 683 Page 684 Page 685 Page 686 Page 687 Page Profile Page Series T-Slotted Aluminum Profiles Lite Profile Profile Profile Profile Page 690 Page 69 Page 692 Page
3 How to Order 80/20 T-Slotted Profiles Metric As illustrated by the order below, some of the profiles have machining services. The type and location of the machining service is listed with the profile or quick frame, but the actual charge is listed separately in the machining services section of your order. For cut-to-length services, which are required for anything less than stock length, the charge is listed only in the machining services section, not the profile section. See Section for more information on cut-to-length and machining services. Shipping Method: Ordered By: Complete Address & Shipping Method Required... NO P.O. Box Part Number Quantity Length How To Order Ship To: Customer: Address: City / State: Attention: Tag: Description / Machining Price/UOM Ext. Price T-Slotted Aluminum Profiles Lite-4M mm 4 m 06.0mm 94.4mm in A both ends Full length profile one end style MG in W, X both ends $0.0 $80.00 $0.4 $0.06 $7.89 $ $ $ CM Custom bracket per drawing # $23.00 $ sm 6mm bronze 457.2mm x 06mm w/ per drawing $.95 $ Cut plastic panels all sides < -220mm 25 Series anchor fastener counterbore Cut-to-length for Cut-to-length for Cut-to-length for Series drill access hole 5/6-8 tap service for Anchor fastener notch for 25 Series $0.50 $2.25 $.95 $2.90 $2.60 $.95 $5.20 $0.53 $0.50 $9.00 $3.90 $.60 $0.40 $24.80 $60.80 $ Series M8 bright zinc end fastener w/ screw Gray T-Slot covers for 25 Series End caps for Series anchor fasteners 40 Series M8 bright zinc double economy T-nut 2 hole inside corner gusset bracket 25 Series M6 BHSCS & economy T-nut $.65 $3.45 $.85 $3.0 $0.84 $3.95 $0.45 $52.80 $55.20 $4.80 $2.40 $4.20 $47.40 $0.80 Special Instructions: Must be delivered for assembly by Friday!!! TOTAL $ NOTE: Prices shown for illustration use only. Contact your distributor for a personalized quote. - Profiles = Pages Custom Parts = Pages Panels = Pages s = Pages Accessories & Tools = Pages & Phone: Fax:
4 T-Slotted Aluminum Profiles 80/20 Product Advantages Attractive appearance Easy to fabricate Many joining options Easy-to-assemble designs Precise tolerances Uniform quality assured High strength/weight ratio Corrosion resistant T-Slotted Aluminum Profile Concept Recyclable Cost-effective Design freedom Lightweight Strong Resilient Non-magnetic Aluminum is very strong consider what kinds of things are made of it: airplanes, light posts, truck trailers, tennis rackets, baseball bats, sailboat masts, scaffolding, car body and engine parts, guard rails, ladders, wheel rims, computer housings, bicycle frames and more! 80/20 s modularity is based upon the T-slot concept of our profiles. The T shaped slots present on all of our profiles allow for infinite positioning along the axis. While there are other types of T-slotted profiles in the industry, one modification to the 80/20 line is a slight adjustment to the T that creates the 2 Drop-Lock Feature. Note the T shape of the assembled bolt and nut shown in the example above. The T-Slotted Profile 2º Drop-Lock Feature The 2 Drop-Lock Feature is one of the many selling points of the 80/20 product line. This drop lock consists of a 2 decline of the T-slot flange. When a fastener is tightened to (or beyond) the necessary torque, the flange will press up to the adjoining profile, thus creating pressure that tightly holds the two bars together. Benefits of 80/20 s Drop-Lock Feature: Most 80/20 T-slotted profiles have the Drop-Lock Feature When engaged, the connections will be vibration proof Works with all of 80/20 s main fastening options 640
5 Metric Part Naming Concept & Identification Metric Metric T-slotted profiles have part numbers that directly coincide with the profile s physical measurements. Metric profile part numbers contain six characters, which relate to the profile s series and dimensions. This series part-numbering concept is explained in more detail below. 25 Series Profile Standards T-Slotted Aluminum Profiles Note: 25 Series profiles always measure 2.50mm from the outside edge of the profile to the center of the T-slot. 40 Series Profile Standards Note: 40 Series profiles always measure 20.00mm from the outside edge of the profile to the center of the T-slot. Phone: Fax:
6 T-Slotted Aluminum Profiles T-Slotted Aluminum Profile Compatibility Code* How to find parts compatible with the T-slotted profile you are currently using:. Not all T-slotted profiles are created equal. Not only are there numerous outside dimensions, fractional and metric, but there are also differences in T-slot dimensions. The opening of the slot is the critical dimension when determining part/profile compatibility. 2. Certain fasteners, parts and accessories are designed to work with only one particular slot dimension, while others are compatible with more than one slot size. 3. Series designations such as 0, 5, 20, 25, 30, 40, 45 etc. refer to overall outside dimensions of the profile and/or center-to-center dimensions of two T-slots. 4. The critical slot opening dimensions mentioned above are stated in millimeters. They include openings of 5, 6, 8, 0, and 2 mm. 5. To determine compatibility the slot opening and profile series must be known. This will establish the compatibility code, which is listed for every part. Slot Opening Series Designation Slot Opening Series Designation 8-40 Examples mm 40 mm 0 mm 45 mm 642 * Patent Pending Copyright 20 80/20 Inc. All rights reserved.
7 Why Do We Use 605-T5 Aluminum Alloy? *Figures based on material thickness of 0.25 to.00 From The Aluminum Extrusion Manual, published by The Aluminum Association and the Aluminum Extruders Council. Metric Tensile Strength - ksi* Ultimate Yield Aluminum Profile Alloys: Number and Characteristics minimum maximum minimum maximum 605-T5 (80/20 s Alloy) T All of 80/20 s T-slotted profiles feature the 605-T5 alloy. An aluminum extrusion alloy is a mixed metal that includes other elements such as copper, magnesium, iron, silicon or zinc. Certain properties such as strength, machinability and corrosion resistance are 605 T5 influenced by the choice of alloy and temper. Alloy 605 with a T5 temper, chosen by 80/20, has better machinability and strength than 6063-T6. Alloy Temper Material Strength Specifications T-Slotted Aluminum Profiles Minimum Yield Strength In Newtons 80/20 's 605-T5 alloy yield strength of 24 N/mm 2 compares to A36 carbon steel's yield strength of 248 N/mm 2. Volume for volume, aluminum weighs about /3 as much as iron, steel, copper, or brass. Download 80/20 s free Tech Toolkit, the profile strength calculator. Phone: Fax:
8 T-Slotted Aluminum Profiles Simple Beam Deflection Calculations Use the formulas listed below to find the worst case deflection for a beam: Formula A Formula B Formula C L 3 W 5L =D 3 W L =D 3 W =D 48 E I 384 E I 3 E I This formula will yield worst case deflection for a beam supported at both ends with the load centered over the span. Example Using Formula A: This formula will yield worst case deflection for a beam supported at both ends with the load evenly distributed over the span. This formula will yield worst case deflection for a beam fastened at one end and cantilevered horizontally with the load applied at the end of the beam. Using the T-slotted profile, a length of 762mm, and an applied force of Newton, you should find the approximate beam deflection to be.2mm. Formula Reference: L = Length in Millimeters W = Load in Newtons E = Modulus of Elasticity (70,326.5 N/mm 2 ) D = Deflection in Millimeters I = Moment of Inertia (see material specifications on pages ) 644 Metric Profile Standards Yield strength 24. N/mm 2 (35,000 p.s.i.) min / tensile strength N/mm 2 (38,000 p.s.i.) minimum Elongation A5 minimum 0% / Elongation A0 minimum 8% Elasticity E approximately 70,326.5 N/mm 2 Brinell hardness approximately 75 HB Extrusion conforming to DIN 7 65 specifications Twist per 304mm ( foot) of length not to exceed.25 degree and total twist over 6.m (20 feet) of length not to exceed.5 degrees Flatness 0.32mm (.004 in.) per 25.4mm ( in.) of width Straightness 0.32mm (0.025 in.) per 304mm ( foot) of length, not to exceed 3mm (.8 in.) over 6.m (20 feet) of length Unless otherwise specified, all profiles will have etch and clear (MIL-A-8625F) anodizing with depth of 0.00mm (.0004 in.) and surface hardness of approximately 250 HV (anodized profiles should not be welded because of toxic fumes)
9 Metric/U.S. Customary Unit Equivalents Metric Linear inches x = millimeter (mm) x = inches feet x = meters (m) x 3.28 = feet yards x = meters (m) x.0936 = yards miles x.6093 = kilometers (km) x = miles inches x = centimeters (cm) x = inches microinches x = micrometers (um) x = microinches Area inches 2 x = millimeters 2 (mm 2 ) x = inches 2 inches 2 x = centimeters 2 (cm 2 ) x 0.55 = inches 2 feet 2 x = meters 2 (m 2 ) x = feet 2 yards 2 x = meters 2 (m 2 ) x.96 = yards 2 acres x = hectares (0 4 m 2 ) or (ha) x 2.47 = acres miles 2 x = kilometers 2 (km 2 ) x = miles 2 Mass ounces (av) x = grams (g) x = ounces (av) pounds (av) x = kilograms (kg) x = pounds (av) tons (2000 lb) x = kilograms (kg) x = tons (2000 lb) tons (2000 lb) x = metric tons (t) x.023 = tons (2000 lb) Force ounces - f x = newtons (N) x = ounces - f pounds - f x = newtons (N) x = pounds - f kilograms - f x = newtons (N) x = kilograms - f T-Slotted Aluminum Profiles Torque Specifications Listed below is the amount of torque in Nm. required to activate the 2º drop-lock feature for T-slotted profiles Nut and bolt combination is pre-loaded when tightened to the minimum torque rating When properly tightened, fasteners will not loosen even under heavy vibration Part Number Fastener Description Tested Profile Minimum Torque Newton Meters Maximum Torque Newton Meters M8 x 6mm BHSCS & Economy T-Nut M8 x 20mm Economy T-Slot Stud, Washer & Hex Nut Series Anchor Fastener Assembly Lite Series End Fastener Assembly Lite M6 x 0mm BHSCS & Economy T-Nut Series Anchor Fastener Assembly Series End Fastener Assembly Phone: Fax:
10 T-Slotted Aluminum Profiles 25 Series Profile Material Specifications Compatibility Code*: 6-25 Material Part No T5 Aluminum Clear Anodize #204-R.7443 kg/m.8646 kg/m.824 kg/m.7783 kg/m.824 kg/m.6538 kg/m Stock Length 4 m or 6 m 4 m or 6 m 4 m or 6 m 4 m or 6 m 4 m or 6 m 4 m or 6 m Moment of Inertia IX=.7726 cm 4 IX=.9874 cm 4 IX=.978 cm 4 IX=.7670 cm 4 IX=.7762 cm 4 IX=.4579 cm 4 IY=.7726 cm 4 IY=2.893 cm 4 IY=.978 cm 4 IY=.9689 cm 4 IY=2.273 cm 4 IY=.4579 cm 4 Estimated Area cm cm cm cm cm cm 2 Modulus of Elasticity 70,326.5 N/mm 2 Material Part No T5 Aluminum Clear Anodize #204-R.5427 kg/m.9539 kg/m.3052 kg/m.843 kg/m.9748 kg/m kg/m Stock Length 4 m 4 m 4 m or 6 m 4 m or 6 m 4 m or 6 m 4 m or 6 m Moment of Inertia IX=.3030 cm 4 IX= cm 4 IX=2.75 cm 4 IX= cm 4 IX=2.23 cm 4 IX= cm 4 IY=.3004 cm 4 IY=.5897 cm 4 IY=3.967 cm 4 IY=4.592 cm 4 IY=2.23 cm 4 IY=39.37 cm 4 Estimated Area cm cm cm cm cm cm 2 Modulus of Elasticity 70,326.5 N/mm 2 For profile lengths other than stock length refer to page 029 for profile cut-to-length services. Legend for Icons Design files for this part can be found on the 80/20 DVD (Design Software) This part can use double economy T-nuts. See page
11 40 Series Profile Material Specifications Metric T-Slotted Aluminum Profiles Compatibility Code*: 8-40 Material Part No Lite T5 Aluminum Clear Anodize #204-R.784 kg/m kg/m.2308 kg/m.5946 kg/m.6447 kg/m.6956 kg/m Stock Length 4 m or 6 m 4 m or 6 m 4 m 4 m or 6 m 4 m or 6 m 4 m or 6 m Moment of Inertia IX= cm 4 IX=3.787 cm 4 IX=.8260 cm 4 IX= cm 4 IX= cm 4 IX= cm 4 IY= cm 4 IY=3.787 cm 4 IY= cm 4 IY= cm 4 IY= cm 4 IY= cm 4 Estimated Area cm cm cm cm cm cm 2 Modulus of Elasticity 70,326.5 N/mm 2 Material Part No Lite Lite T5 Aluminum Clear Anodize #204-R.6074 kg/m.5557 kg/m.4975 kg/m.2727 kg/m.6943 kg/m kg/m Stock Length 4 m or 6 m 4 m 4 m or 6 m 4 m 4 m 4 m Moment of Inertia IX= cm 4 IY= cm 4 IX= cm 4 IY= cm 4 IX= cm 4 IY= cm 4 n/a n/a n/a Estimated Area cm cm cm cm cm cm 2 Modulus of Elasticity 70,326.5 N/mm 2 For profile lengths other than stock length refer to page 029 for profile cut-to-length services. Phone: Fax:
12 T-Slotted Aluminum Profiles 40 Series Profile Material Specifications - continued Compatibility Code*: 8-40 Material Part No Lite Lite Lite 605-T5 Aluminum Clear Anodize #204-R kg/m kg/m kg/m kg/m kg/m Stock Length 4 m 4 m or 6 m 4 m or 6 m 4 m 4 m Moment of Inertia IX= cm 4 IX= cm 4 IX= cm 4 IX= cm 4 IX= cm 4 IY= cm 4 IY=8.779 cm 4 IY= cm 4 IY= cm 4 IY= cm 4 Estimated Area cm cm cm cm cm 2 Modulus of Elasticity 70,326.5 N/mm 2 Material Part No lite Lite T5 Aluminum Clear Anodize #204-R kg/m kg/m kg/m kg/m.8395 kg/m Stock Length 4 m 4 m 4 m or 6 m 4 m or 6 m 4 m Moment of Inertia IX= cm 4 IX= cm 4 IX= cm 4 IX=7.634 cm 4 IX=.9793 cm 4 IY=6.607 cm 4 IY= cm 4 IY= cm 4 IY=7.634 cm 4 IY= cm 4 Estimated Area.0053 cm cm cm cm cm 2 Modulus of Elasticity 70,326.5 N/mm 2 For profile lengths other than stock length refer to page 029 for profile cut-to-length services. 648
13 20, 30 & 45 Series Profile Material Specifications Metric T-Slotted Aluminum Profiles Compatibility Code*: Part Number Material 605-T5 Aluminum Clear Anodize #204-R.4732 kg/m kg/m.727 kg/m.9376 kg/m.5060 kg/m Stock Length 4m or 6m 4m or 6m 4m or 6m 4m or 6m 4m or 6m Moment of Inertia IX=.6826 cm 4 IX= cm 4 IX= cm 4 IX= cm 4 IX= cm 4 IY=.6826 cm 4 IY=.233 cm 4 IY= cm 4 IY= cm 4 IY= cm 4 Estimated Area.5890 cm cm cm cm cm 2 Modulus of Elasticity 70,326.5 N/mm 2 Compatibility Code*: Part No Lite Material 605-T5 Aluminum Clear Anodize #204-R kg/m.576 kg/m kg/m kg/m kg/m Stock Length 4m or 6m 4m or 6m 4m or 6m 4m or 6m 4m or 6m Moment of Inertia IX= cm 4 IX= cm 4 IX= cm 4 IX= cm 4 IX= cm 4 IY= cm 4 IY= cm 4 IY= cm 4 IY= cm 4 IY= cm 4 Estimated Area cm cm cm cm cm 2 Modulus of Elasticity 70,326.5 N/mm 2 For profile lengths other than stock length refer to page 029 for profile cut-to-length services. Phone: Fax:
14 T-Slotted Aluminum Profiles T-Slotted Profile - 20 Series Compatible with all 20 Series fasteners Four open T-slots for mounting accessories is ideal for machine guards, sound enclosures, workbenches, displays and panel mount racks Available in two stock lengths Compatibility Code*: 5-20 Part No Compatibility Code 5-20 Material 605-T5 Stock Length (+/-.3mm).4732 kg/m 4m - Part No M 6m - Part No M IX=.6826 cm 4 IY=.6826 cm 4 Estimated Area.5890 cm 2 Cut to Length (see page 029) 4.6mm Access Hole (see page 03) Tap Profile End (see page 030) Miter Cut - One End (see page 035) Miter Cut & Counterbore (see page 038) Anchor Counterbore (see page 033) 650
15 T-Slotted Profile - 20 Series Compatible with all 20 Series fasteners Six open T-slots for mounting accessories is ideal for machine guards, sound enclosures, workbenches, displays and panel mount racks Available in two stock lengths Compatibility Code*: 5-20 Metric T-Slotted Aluminum Profiles Part No Compatibility Code 5-20 Material 605-T5 Stock Length (+/-.3mm).7649 kg/m 4m - Part No M 6m - Part No M IX= cm 4 IY=.233 cm 4 Estimated Area cm 2 Cut to Length (see page 029) 4.6mm Access Hole (see page 03) Tap Profile End (see page 030) Miter Cut - One End (see page 035) Miter Cut & Counterbore (see page 038) Anchor Counterbore (see page 033) Phone: Fax:
16 T-Slotted Aluminum Profiles T-Slotted Profile - 20 Series Compatible with all 20 Series fasteners eight open T-slots for mounting accessories is ideal for machine guards, sound enclosures, workbenches, displays and panel mount racks Available in two stock lengths Compatibility Code*: 5-20 Part No Compatibility Code 5-20 Material 605-T5 Stock Length (+/-.3mm).727 kg/m 4m - Part No M 6m - Part No M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 4.6mm Access Hole (see page 03) Tap Profile End (see page 030) Miter Cut - One End (see page 035) 652
17 T-Slotted Profile - 25 Series Compatible with all 25 Series fasteners Four open T-slots for mounting accessories is ideal for machine guards, sound enclosures, work benches, displays and panel mount racks Compatibility Code*: 6-25 Metric T-Slotted Aluminum Profiles Part No Material 605-T kg/m 4m - Part No M 6m - Part No M IX=.7726 cm 4 IY=.7726 cm 4 Estimated Area cm 2 Cut to Length (see page 029) 5.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) Phone: Fax:
18 T-Slotted Aluminum Profiles T-Slotted Profile - 25 Series Compatible with all 25 Series fasteners Three closed sides with one open side Clean, aesthetic look Great for projects such as furniture, displays, trade show booths, retail kiosks or anything requiring a finished look Compatibility Code*: 6-25 Part No Material 605-T kg/m 4m - Part No M 6m - Part No M IX=.9874 cm 4 IY=2.893 cm 4 Estimated Area cm 2 Cut to Length (see page 029) 5.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) 654
19 T-Slotted Profile - 25 Series Compatible with all 25 Series fasteners Two closed sides, two open sides, each adjacent to one another Clean, aesthetic look Great for projects such as furniture, displays, trade show booths, retail kiosks or anything requiring a finished look Compatibility Code*: 6-25 Metric T-Slotted Aluminum Profiles Part No Material 605-T5.824 kg/m 4m - Part No M 6m - Part No M IX=.978 cm 4 IY=.978 cm 4 Estimated Area cm 2 Cut to Length (see page 029) 5.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) Phone: Fax:
20 T-Slotted Aluminum Profiles T-Slotted Profile - 25 Series Compatible with all 25 Series fasteners One closed side with three open T-slots Clean, aesthetic look Great for projects such as furniture, displays, trade show booths, retail kiosks or anything requiring a finished look Compatibility Code*: 6-25 Part No Material 605-T kg/m 4m - Part No M 6m - Part No M IX=.7670 cm 4 IY=.9689 cm 4 Estimated Area cm 2 Cut to Length (see page 029) 5.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) 656
21 T-Slotted Profile - 25 Series Compatible with all 25 Series fasteners Two closed-sided faces opposite each other The profile allows support structures or large panels to be easily placed into the open T-slots, while maintaining a continuous surface Great for projects such as furniture, displays, trade show booths, retail kiosks or anything requiring a finished look Compatibility Code*: 6-25 Metric T-Slotted Aluminum Profiles Part No Material 605-T5.824 kg/m 4m - Part No M 6m - Part No M IX=.7762 cm 4 IY=2.273 cm 4 Estimated Area cm 2 Cut to Length (see page 029) 5.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) Phone: Fax:
22 T-Slotted Aluminum Profiles T-Slotted Profile - 25 Series Compatible with all 25 Series fasteners A quarter round profile with two open T-slots The profile allows support structures or large panels to be easily placed into the open T-slots, while maintaining a continuous surface Use for light-duty workstations, displays, exhibits, inspection devices or office furniture Compatibility Code*: 6-25 Part No Material 605-T kg/m 4m - Part No M 6m - Part No M IX=.4579 cm 4 IY=.4579 cm 4 Estimated Area cm 2 Cut to Length (see page 029) 5.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) 658
23 T-Slotted Profile - 25 Series Compatible with all 25 Series fasteners Thinner T-slotted profile that mounts easily to flat surfaces Works great as a supporting structure or spacer for mounting accessories Mount handles, door tracks, rails and other supports for components, such as valves and sensors, with this profile Compatibility Code*: 6-25 Metric T-Slotted Aluminum Profiles Part No Material 605-T kg/m 4m - Part No M IX=.3030 cm 4 IY=.3004 cm 4 Estimated Area cm 2 Cut to Length (see page 029) 5.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) Drill & Counterbore (see page 04) Phone: Fax:
24 T-Slotted Aluminum Profiles T-Slotted Profile - 25 Series Compatible with all 25 Series fasteners Thinner T-slotted profile that is easily mounted to flat surfaces Works great as a supporting structure or spacer for mounting accessories Mount handles, door tracks, rails and other supports for components, such as valves and sensors, with this profile Compatibility Code*: 6-25 Part No Material 605-T kg/m 4m - Part No M IX= cm 4 IY=.5897 cm 4 Estimated Area cm 2 Cut to Length (see page 029) 5.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) Drill & Counterbore (see page 04) 660
25 T-Slotted Profile - 25 Series Compatible with all 25 Series fasteners Six open T-slots for mounting accessories The center cavity can be pressurized up to.034 N/mm 2 (50 psi); refer to pages Ideal for machine guards, sound enclosures, work benches, displays and panel mount racks Compatibility Code*: 6-25 Metric T-Slotted Aluminum Profiles Part No Material 605-T kg/m 4m - Part No M 6m - Part No M IX=2.75 cm 4 IY=3.967 cm 4 Estimated Area cm 2 Cut to Length (see page 029) 5.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) Phone: Fax:
26 T-Slotted Aluminum Profiles T-Slotted Profile - 25 Series Compatible with all 25 Series fasteners Eight open T-slots for mounting accessories Great for linear motion, machine frames, robotics and supports The cavities can be pressurized up to.034 N/mm 2 (50 psi); refer to pages Compatibility Code*: 6-25 Part No Material 605-T5.843 kg/m 4m - Part No M 6m - Part No M IX= cm 4 IY=4.592 cm 4 Estimated Area cm 2 Cut to Length (see page 029) 5.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) 662
27 T-Slotted Profile - 25 Series Compatible with all 25 Series fasteners Eight open T-slots for mounting accessories The profile is ideal for applications where strength and open T-slots are required The center cavity can be pressurized up to.034 N/mm 2 (50 psi); refer to pages Compatibility Code*: 6-25 Metric T-Slotted Aluminum Profiles Part No Material 605-T kg/m 4m - Part No M 6m - Part No M IX=2.23 cm 4 IY=2.23 cm 4 Estimated Area cm 2 Cut to Length (see page 029) 5.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) Phone: Fax:
28 T-Slotted Aluminum Profiles T-Slotted Profile - 25 Series Compatible with all 25 Series fasteners 2 open T-slots for mounting accessories The profile is ideal for applications where strength and open T-slots are required The cavities can be pressurized up to.034 N/mm 2 (50 psi); refer to pages Compatibility Code*: 6-25 Part No Material 605-T kg/m 4m - Part No M 6m - Part No M IX= cm 4 IY=39.37 cm 4 Estimated Area cm 2 Cut to Length (see page 029) 5.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) 664
29 T-Slotted Profile - 30 Series Compatible with all 30 Series fasteners Four open T-slots for mounting accessories is a great choice when strength is needed in applications such as guards, enclosures, workstations and furniture Available in two stock lengths Compatibility Code*: 8-30 Metric T-Slotted Aluminum Profiles Part No Compatibility Code 8-30 Material 605-T5 Stock Length (+/-.3mm).9376 kg/m 4m - Part No M 6m - Part No M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Tap Profile End (see page 030) Bolt Connector (see page 048) Miter Cut - One End (see page 035) Miter Cut & Counterbore (see page 038) Anchor Counterbore (see page 033) Phone: Fax:
30 T-Slotted Aluminum Profiles T-Slotted Profile - 30 Series Compatible with all 30 Series fasteners Six open T-slots for mounting accessories is a great choice when strength is needed in applications such as guards, enclosures, workstations and furniture The center cavity can be pressurized up to.034 N/mm 2 (50 psi); refer to pages Available in two stock lengths Compatibility Code*: 8-30 Part No Compatibility Code 8-30 Material 605-T5 Stock Length (+/-.3mm).5060 kg/m 4m - Part No M 6m - Part No M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Tap Profile End (see page 030) Miter Cut - One End (see page 035) Miter Cut & Counterbore (see page 038) Anchor Counterbore (see page 033) 666
31 T-Slotted Profile - 30 Series Compatible with all 30 Series fasteners eight open T-slots for mounting accessories is a great choice when strength is needed in applications such as guards, enclosures, workstations and furniture The center cavity can be pressurized up to.034 N/mm 2 (50 psi); refer to pages Available in two stock lengths Compatibility Code*: 8-30 Metric T-Slotted Aluminum Profiles Part No Compatibility Code 8-30 Material 605-T5 Stock Length (+/-.3mm) kg/m 4m - Part No M 6m - Part No M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) Tap Profile End (see page 030) Miter Cut - One End (see page 035) Phone: Fax:
32 T-Slotted Aluminum Profiles Lite T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners Four open T-slots for mounting accessories A great choice when strength is needed in a lightweight application such as guards, enclosures, workstations and furniture Compatibility Code*: 8-40 Part No Lite Material 605-T5.784 kg/m 4m - Part No Lite-4M 6m - Part No Lite-6M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) 668
33 T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners Four open T-slots for mounting accessories Ideal for machine guards, sound enclosures, work benches, displays and panel mount racks Compatibility Code*: 8-40 Metric T-Slotted Aluminum Profiles Part No Material 605-T kg/m 4m - Part No M 6m - Part No M IX=3.787 cm 4 IY=3.787 cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) Phone: Fax:
34 T-Slotted Aluminum Profiles T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners Three closed sides with one open T-slot Clean, aesthetic look Great for projects such as furniture, displays, trade show booths, retail kiosks or anything requiring a finished look Compatibility Code*: 8-40 Part No Material 605-T kg/m 4m - Part No M 6m - Part No M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) 670
35 T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners Two closed sides, two open sides, each adjacent to one another Clean, aesthetic look Great for projects such as furniture, displays, trade show booths, retail kiosks or anything requiring a finished look Compatibility Code*: 8-40 Metric T-Slotted Aluminum Profiles Part No Material 605-T kg/m 4m - Part No M 6m - Part No M IX= cm 4 IY= cm 4 Estimated Area 6.28 cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) Phone: Fax:
36 T-Slotted Aluminum Profiles T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners One closed side with three open T-slots Clean, aesthetic look Great for projects such as furniture, displays, trade show booths, retail kiosks or anything requiring a finished look Compatibility Code*: 8-40 Part No Material 605-T kg/m 4m - Part No M 6m - Part No M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) 672
37 T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners Two closed sided faces opposite each other The profile allows support structures or large panels to be easily placed into the open T-slots, while maintaining a continuous surface Great for projects such as furniture, displays, trade show booths, retail kiosks or anything requiring a finished look Compatibility Code*: 8-40 Metric T-Slotted Aluminum Profiles Part No Material 605-T kg/m 4m - Part No M 6m - Part No M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) Phone: Fax:
38 T-Slotted Aluminum Profiles Lite T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners A quarter round profile with two open T-slots Allows support structures or large panels to be easily placed into the open T-slots, while maintaining a continuous surface Use Lite for large workstations, displays, exhibits, inspection devices or office furniture Compatibility Code*: 8-40 Part No Lite Material 605-T kg/m 4m - Part No Lite-4M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) 674
39 T-Slotted Profile - 40 Series Two available T-slots Clean, aesthetic look Great for projects such as enclosures, kiosks or point of purchase displays Compatibility Code*: 8-40 New! Metric T-Slotted Aluminum Profiles Part No Material 605-T kg/m 4m - Part No M n/a Estimated Area cm 2 Cut to Length (see page 029) Tap Profile End (see page 030) Phone: Fax:
40 T-Slotted Aluminum Profiles T-Slotted Profile - 40 Series Two available T-slots Clean, aesthetic look Great for projects such as enclosures, kiosks or point of purchase displays Compatibility Code*: 8-40 New! Part No Material 605-T kg/m 4m - Part No M n/a Estimated Area cm 2 Cut to Length (see page 029) Tap Profile End (see page 030) 676
41 T-Slotted Profile - 40 Series Two available T-slots Clean, aesthetic look Great for projects such as enclosures, kiosks or point of purchase displays Compatibility Code*: 8-40 New! Metric T-Slotted Aluminum Profiles Part No Material 605-T kg/m 4m - Part No M n/a Estimated Area cm 2 Cut to Length (see page 029) Tap Profile End (see page 030) Phone: Fax:
42 T-Slotted Aluminum Profiles Lite T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners 45º angled back with two open T-slots Allows support structures or large panels to be easily placed into the open T-slots, while maintaining a continuous surface Use for large workstations, displays, exhibits, inspection devices or office furniture Compatibility Code*: 8-40 Part No Lite Material 605-T kg/m 4m - Part No Lite-4M 6m - Part No Lite-6M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) 678
43 T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners Thinner T-slotted profile that mounts easily to flat surfaces Works great as a supporting structure or spacer for mounting accessories Mount handles, door tracks, rails and other supports for components such as valves and sensors with this profile Compatibility Code*: 8-40 Metric T-Slotted Aluminum Profiles Part No Material 605-T kg/m 4m - Part No M IX=.8260 cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) Drill & Counterbore (see page 04) Phone: Fax:
44 T-Slotted Aluminum Profiles T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners Thinner T-slotted profile that mounts easily to flat surfaces Works great as a supporting structure or spacer for mounting accessories Mount handles, door tracks, rails and other supports for components such as valves and sensors with this profile Compatibility Code*: 8-40 Part No Material 605-T kg/m 4m - Part No M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) Drill & Counterbore (see page 04) 680
45 Lite T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners Six open T-slots for mounting accessories The center cavity can be pressurized up to.034 N/mm 2 (50 psi); refer to pages Ideal for machine guards, sound enclosures, work benches, displays and panel mount racks Compatibility Code*: 8-40 Metric T-Slotted Aluminum Profiles Part No Lite Material 605-T kg/m 4m - Part No Lite-4M 6m - Part No Lite-6M IX= cm 4 IY=8.779 cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) Phone: Fax:
46 T-Slotted Aluminum Profiles T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners Six open T-slots for mounting accessories The center cavity can be pressurized up to.034 N/mm 2 (50 psi); refer to pages Ideal for machine guards, sound enclosures, work benches, displays and panel mount racks Compatibility Code*: 8-40 Part No Material 605-T kg/m 4m - Part No M 6m - Part No M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) 682
47 Lite T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners Two open T-slots for mounting accessories The center cavity can be pressurized up to.034 N/mm 2 (50 psi); refer to pages Clean, aesthetic look Ideal for machine guards, sound enclosures, work benches, displays and panel mount racks Compatibility Code*: 8-40 New! Metric T-Slotted Aluminum Profiles Part No Lite Material 605-T kg/m 4m - Part No Lite-4M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) Phone: Fax:
48 T-Slotted Aluminum Profiles Lite T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners Three open T-slots for mounting accessories The center cavity can be pressurized up to.034 N/mm 2 (50 psi); refer to pages Clean, aesthetic look Ideal for machine guards, sound enclosures, work benches, displays and panel mount racks Compatibility Code*: 8-40 New! Part No Lite Material 605-T kg/m 4m - Part No Lite-4M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) 684
49 Lite T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners Four open T-slots for mounting accessories The center cavity can be pressurized up to.034 N/mm 2 (50 psi); refer to pages Clean, aesthetic look Ideal for machine guards, sound enclosures, work benches, displays and panel mount racks Compatibility Code*: 8-40 New! Metric T-Slotted Aluminum Profiles Part No Lite Material 605-T kg/m 4m - Part No Lite-4M IX= cm 4 IY=6.607 cm 4 Estimated Area.0053 cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) Phone: Fax:
50 T-Slotted Aluminum Profiles Lite T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners Two open T-slots for mounting accessories The center cavity can be pressurized up to.034 N/mm 2 (50 psi); refer to pages Clean, aesthetic look Ideal for machine guards, sound enclosures, work benches, displays and panel mount racks Compatibility Code*: 8-40 New! Part No Lite Material 605-T kg/m 4m - Part No Lite-4M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) 686
51 T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners Eight open T-slots for mounting accessories Great for linear motion, machine frames, robotics and supports The cavities can be pressurized up to.034 N/mm 2 (50 psi); refer to pages Compatibility Code*: 8-40 Metric T-Slotted Aluminum Profiles Part No Material 605-T kg/m 4m - Part No M 6m - Part No M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) Phone: Fax:
52 T-Slotted Aluminum Profiles T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners Eight open T-slots for mounting accessories Ideal for applications where strength and open T-slots are required The center cavity can be pressurized up to.034 N/mm 2 (50 psi); refer to pages Compatibility Code*: 8-40 Part No Material 605-T kg/m 4m - Part No M 6m - Part No M IX=7.634 cm 4 IY=7.634 cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) 688
53 T-Slotted Profile - 40 Series Compatible with all 40 Series fasteners 2 open T-slots for mounting accessories Ideal for applications where strength and open T-slots are required The cavities can be pressurized up to.034 N/mm 2 (50 psi); refer to pages Compatibility Code*: 8-40 Metric T-Slotted Aluminum Profiles Part No Material 605-T kg/m 4m - Part No M IX=.9793 cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 7.mm Access Hole (see page 03) Anchor Counterbore (see page 033) Tap Profile End (see page 030) Phone: Fax:
54 T-Slotted Aluminum Profiles Lite T-Slotted Profile - 45 Series Compatible with all 45 Series fasteners Four open T-slots for mounting accessories Developed for applications with lighter weight and strength requirements than heavier wall profiles such as the Available in two stock lengths Compatibility Code*: 0-45 Part No Lite Compatibility Code 0-45 Material 605-T5 Stock Length (+/-.3mm).576 kg/m 4m - Part No Lite-4M 6m - Part No Lite-6M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 0mm Access Hole (see page 03) Tap Profile End (see page 030) Bolt Connector (see page 048) Central Connector (see page 049) Miter Cut - One End (see page 035) Miter Cut Counterbore (see page 038) 690
55 T-Slotted Profile - 45 Series Compatible with all 45 Series fasteners Four open T-slots for mounting accessories is ideal for robust machine guards, machine frames, sound enclosures, work benches, displays and machine fixtures Available in two stock lengths Compatibility Code*: 0-45 Metric T-Slotted Aluminum Profiles Part No Compatibility Code 0-45 Material 605-T5 Stock Length (+/-.3mm) kg/m 4m - Part No M 6m - Part No M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 0mm Access Hole (see page 03) Tap Profile End (see page 030) Bolt Connector (see page 048) Central Connector (see page 049) Miter Cut - One End (see page 035) Miter Cut Counterbore (see page 038) Phone: Fax:
56 T-Slotted Aluminum Profiles T-Slotted Profile - 45 Series Compatible with all 45 Series fasteners Six open T-slots for mounting accessories is ideal for robust machine guards, machine frames, sound enclosures, work benches, displays and machine fixtures Available in two stock lengths Compatibility Code*: 0-45 Part No Compatibility Code 0-45 Material 605-T5 Stock Length (+/-.3mm) kg/m 4m - Part No M 6m - Part No M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) 0mm Access Hole (see page 03) Tap Profile End (see page 030) Miter Cut - One End (see page 035) Miter Cut Counterbore (see page 038) Bolt Connector (see page 048) 692
57 T-Slotted Profile - 45 Series Compatible with all 45 Series fasteners eight open T-slots for mounting accessories is ideal for robust machine guards, machine frames, sound enclosures, workbenches, displays and machine fixtures Available in two stock lengths Compatibility Code*: 0-45 Metric T-Slotted Aluminum Profiles Part No Compatibility Code 0-45 Material 605-T5 Stock Length (+/-.3mm) kg/m 4m - Part No M 6m - Part No M IX= cm 4 IY= cm 4 Estimated Area cm 2 Cut to Length (see page 029) Tap Profile End (see page 030) Bolt Connector (see page 048) Phone: Fax:
58 T-Slotted Aluminum Profiles Customized Displays by 80/20 With 80/20 s same-day shipments 80/20 product is perfect for those last minute trade show display frames. Everything... all pieces, parts, panels and even anodizing can be delivered from one vendor and on one order 80/20 products. Perfect for large or small scale display use. Great for automated displays all wiring and tubing can be hidden within the conduit of the profile. 694
T-Slotted Extrusions and Quick Frame
T-Slotted Extrusions and Quick Frame How to Order Introduction to Section 1 Material Specifications Material Strength Area of 80/20 T-Slotted Extrusions Fastener Application Tests Drop Lock & Torque Specifications
More informationby 80/20 Supplement I 80/20 Inc. the home of The Industrial Erector Set EXPANDED VERSION! www.tslotparts.com
Supplement I by 80/20 80/20 Inc. the home of The Industrial Erector Set www.tslotparts.com EXPANDED VERSION! 80/20 is your one-stop shop for all aluminum T-slot profiles, parts and accessories. Check out
More information02 STRUCTURAL EXTRUSIONS
2 STRUCTURA EXTRUSIONS There are six 1 Series extrusions to choose from - 1"x1", 1"x1" QR, 1"x2", 1"x3", 2"x2" and 2"x4". The 1 Series TSOTS have.5" slot widths and are modular to each other. Accessories
More informationSection #7 Pictorial Table Of Contents. Self Tapping Screws. Pages 918-919 Page 918 Pages 920-921. Tool Hangers. Page 926 Page 927.
Introduction To Section # Pictorial Table Of Contents How To Order End Caps Self Tapping Screws T-Slot Covers T-Slot Tread Strips Metric Laminated Table Tops & Kits Page 916 Page 91 Pages 918-919 Page
More informationGUARDRAIL INNOVATION FLOWS FROM HERE
INNOVATION FLOWS FROM HERE ENSURING SAFETY ON CANADIAN HIGHWAYS The economics, versatility, and performance of Guardrail surpass all other roadside barrier systems. Guardrail provides highly-visible protection
More informationSection #13 Pictorial Table Of Contents. The Caster. Top & Bottom Shelves. Pages 617-623 Page 624 Page 625 Pages 626-628 Pages 629-633
AQX Introduction Section # Pictorial Table Of Contents Completed Shop Cart Step-by-Step Tutorial The Caster The Leg Fractional The Lower Cross Member Machining w/ Access Holes AutoQuoterX Page 610 Page
More informationStructural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.
Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationProfiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
More informationand Mounting options NEW Additional Profiles HepcoMotion MCS aluminium frame and machine construction system including MFS fencing system
NEW Additional Profiles and Mounting options HepcoMotion MCS aluminium frame and machine construction system including MFS fencing system MCS Machine Construction System and MFS Machine Fencing System
More informationSports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
More informationTBG-25 OPTIONS X AXIS TRAVEL (MM) Z AXIS TRAVEL (MM) OPTIONS FOR: SPECIFICATIONS. Specifications. Configuration. Belt Type 25.
LINEAR ROBOTICS > T-BOT GANTRY ROBOTS T-BOT GANTRY ROBOTS TBG-25 OPTIONS X AXIS TRAVEL (MM) 500 1000 2000 Custom Z AXIS TRAVEL (MM) 250 500 Custom Controls Motor Gearbox HOW TO BUILD YOUR TBG-25: Features
More informationglass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
More informationCaps STANDARD WEIGHT Inches / Pounds
Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe
More informationMEGA GUARD COLUMN CORE GUARD DAWG COLUMN PROTECTOR. Smart Investments in Plant Safety
MEGA GUARD COLUMN CORE GUARD DAWG COLUMN PROTECTOR Smart Investments in Plant Safety TM Solid Steel Protection Steel King is committed to making your workplace safer. Our current products exceed industry
More informationCLEAR-DIVISIONS CENTERFOLD
CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in
More informationMore than shelving & racking. All for your storage demands.
More than shelving & racking. All for your storage demands. CONTENTS SELECTIVE PALLET RACKING A cost effective storage system providing direct access to all pallet. SLOTTED ANGLE SHELVING Simple, cost-effective
More informationPUMP JACK SYSTEM AND ACCESSORIES
Pump Jack Model # 2200 A low cost, easy to operate, safe, portable scaffolding built of rugged steel. It's perfect for shingling, siding, sheathing, insulating, painting, building, roofing, home repair
More informationCLEAR-DIVISIONS APERTO
CLEAR-DIVISIONS Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS moveable glass wall system. The yellow highlighted areas in the
More informationGUARDRAIL POST STEEL
GUARDRAIL POST STEEL Guardrail posts meeting materials certification are evaluated and checked for: 1. Dimensional acceptance 2. Physical test results a. Chemical b. Physical 3. Galvanized or painted coating
More informationCLEAR-DIVISIONS VARIOFOLD
CLEAR-DIVISIONS VARIOFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOFOLD moveable The yellow highlighted areas in the
More informationCHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS
CHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,
More informationSPECIFICATION Aluminum Module Frames. Allowed anodization before fabrication for clear frames.
SPECIFICATION Allowed anodization before fabrication for clear frames. Page 2 of 9 1. SCOPE 1.1. This document provides general requirements for aluminum frames used in the assembly of photovoltaic modules.
More informationEngineering & Design: Coordinate Dimensioning
s e c t i o n Section Contents NADCA No. Format Page Frequently Asked Questions (FAQ) -2 1 Introduction -2 2 Section Objectives -3 3 Standard and Precision Tolerances -3 4 Production Part Technologies
More informationPART 1 GENERAL 1.1 SECTION INCLUDES
J-1 Section 09110 Long Form Specification INTERIOR METAL STUD FRAMING This section includes lightweight, usually 0.036 inch (0.9 mm) thick or lighter, non-axial load bearing metal stud framing including
More informationBUILDINGA 1/10 SCALE FLATBED TRAILER
VOLUME 1, ISSUE 1 BUILDINGA 1/10 SCALE FLATBED TRAILER BUILT, DESIGNED & WRITTEN BY NATHAN MYERS MATERIALS: FEATURES: While the design was kept simple to allow anyone to be able to build their own trailer,
More informationMGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
More informationSECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2
More informationGuidelines for Earthquake Bracing Residential Water Heaters
Guidelines for Earthquake Bracing Residential Water Heaters Department of General Services Division of the State Architect In accordance with the Health and Safety Code Section 19215, the Division of the
More informationOHIO University Mechanical Engineering Summary Report: Human Power System for Small Appliances and Machinery
OHIO University Mechanical Engineering Summary Report: Human Power System for Small Appliances and Machinery Appalachian Human Power Brad Bundy Ben Chovan Zach Fetchu Ed Passarrelli Ryan Tedford Will Zaylor
More informationTEST REPORT. Rendered to: INTEX MILLWORK SOLUTIONS, LLC. For: Rigid Cellular PVC Guardrail System Hampton RS40
TEST REPORT Rendered to: INTEX MILLWORK SOLUTIONS, LLC For: Rigid Cellular PVC Guardrail System Hampton RS40 Report No: Report Date: 07/26/13 130 Derry Court York, PA 17406-8405 phone: 717-764-7700 fax:
More informationPolicy on Water Heater Installations Policy No. UPC 510-1-94 Effective: September 1, 1995 Revised: February 10, 1996
CITY OF SAN JOSE BUILDING DIVISION POLICY Policy on Water Heater Installations Policy No. UPC 510-1-94 Effective: September 1, 1995 Revised: February 10, 1996 All new and replacement water heaters installed
More informationF-Series Camera Mounting Accessories
F-Series Camera Mounting Accessories Document Number: 427-0462-00-12 Version: 100 Issue Date: September 2010 2010. All rights reserved worldwide. FLIR Commercial Systems, Inc. 70 Castilian Drive Goleta,
More informationTHE ALTERNATIVE IN ALUMINUM EXTRUSION
THE ALTERNATIVE IN ALUMINUM EXTRUSION OUR COMMITMENT IS TO BE THE BEST WE CAN BE, NOT BY PAST STANDARDS, BUT BY TOMORROW, S STANDARDS IN AN INDUSTRY WHERE ONLY THE BEST WILL THRIVE. EXCELLENCE IN ALL AREAS,
More informationGEH6290. Mechanism Circuit Breaker. Handle Operating Mechanism Cat. No. Type NEMA 1, 3R, 12, 13 NEMA 4/4X Cat. No. Cat. No. Series Instruction
GEH6290 g Cable Operator Mechanisms for E150, SE150, SF250, and SG600 Spectra RMS Circuit Breakers Type SCH1/1X, SCH2/2X Flange-Mounted Handle Assemblies, Cable Series SC3L SC10L and Type SC0M1A, SCOM1EF,
More informationu FH Extrusion Series Information Brochure for SEG (Silicone Edged Graphics) Cover fh extrusions
u FH Extrusion Series Information Brochure for SEG (Silicone Edged Graphics) Cover fh extrusions The AGAM Modular System For 30 years, the AGAM Aluminum Modular Display System provides a quick and efficient
More informationRPS - sales@rpssolar.com - 858 755 4505-12478 San Bruno Cove, San Diego, CA 92130
RPS - sales@rpssolar.com - 858 755 4505-2478 San Bruno Cove, San Diego, CA 9230 SWH Solar Mount Rail R-MR-SW-SR-0.5, R-MR-SW-SR-2, R-MR-SW-SR-4, R-MR-SW-SR-4B, R-MR-SW-SR-7 Part No. MR-SW-SR-0.5, MR-SW-SR-2,
More informationRemovable Aluminium posts
Post Solent Sail Shades Ltd 120 Billington Gardens Hedge End Southampton SO30 2RT Tel/Fax: 01489 788243 www.solentsailshades.co.uk Email: info@solentsailshades.co.uk Removable Aluminium posts Single Pole
More informationItem #: BTOL Assembly Instructions
Item #: BTOL Assembly Instructions For our most current instructions, to request missing, lost or broken parts, or for any other Customer Service issues, please visit our website at www.walkeredison.com
More informationCT-02 CABLE TRAY SYSTEMS
CT-02 CABLE TRAY SYSTEMS SYSTEMS THAT MAKE SENSE Introduction B-Line Systems was formed in 96 and has over 30 years experience manufacturing cable tray systems in which it has grown to become the industry
More informationSPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
More informationPole Lathe and Shave Horse Design
Pole Lathe and Shave Horse Design These pictures and accompanying words are Copyright Michael Hughes February 2002. They are not to be re-produced, in part or whole, without permission from the author.
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationInstallation Instructions: (Part # SB76880) XRC Armor Front Fender Kit
WARNING: Check with Local and State laws before installing this accessory! NOTE: Carefully read entire instructions thoroughly before attempting to install this part. Parts Included: Qty Parts Included:
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationHOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
More informationSERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
More informationAA Solar and Sun Power Plus
AA Solar and Sun Power Plus www.aasolar.co.nz www.sunpowerplus.co.nz -1- Contents Chapter Title Page 1 General information 3 2 Safety and Installer Responsibilities 4 3 Technical Specifications 5 4 Tools
More informationHilti, Inc. 5400 South 122 nd East Avenue Tulsa, OK 74146. 1-800-879-8000 www.hilti.com
Attached are page(s) from the 2014 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
More informationGuidelines for Earthquake Bracing of Residential Water Heaters
Guidelines for Earthquake Bracing of Residential Water Heaters Department of General Services Division of the State Architect 1102 Q Street, Suite 5100 Sacramento, CA 95814 Phone: (916) 324-7099 Fax: (916)
More informationAmerican National, Unified Screw Threads
C h a p t e r 9 American National, Unified Screw Threads In this chapter, you will learn the following to World Class standards:! Why Use Fasteners! The Text Designation for the Unified National Thread!
More informationKnürr Miracel. Knürr Miracel. 19 Network and Server Rack Platform 1.12 to 1.22 1.11
Knürr Miracel 19 Network and Server Rack Platform 1.12 to 1.22 1.11 19" Server Rack: Knürr Miracel Strong points 1.13 Knürr Miracel ASP ASP/Server Rack 1.16 Knürr Miracel Server Rack 1.18 Knürr Miracel
More informationK. D. FRAME ASSEMBLY FOR CLOSED STEEL STUD WALLS...Ins 10. FRAME INSTALLATION DETAILS FOR CLOSED STEEL STUD WALLS...Ins 11
K. D. FRAME ASSEMBLY FOR MASONRY WALLS...........................Ins 2 FRAME INSTALLATION DETAILS FOR MASONRY WALLS......................Ins 3 INSTALLING EXISTING MASONRY WALL ANCHORS IN FRAME..................Ins
More informationThe Keep It Simple, Steel (KISS) Standard
The Keep It Simple, Steel (KISS) Standard A standard Electronic Data Interchange (EDI) format for the exchange of Bill of Material (BOM) information within the steel fabrication industry Updated in March
More informationAssembly Instructions
Assembly Instructions Overhead Storage Rack 4 x 8 3 x 8 2 x 8 4 x 6 3 x 6 2 x 6 4 x 4 Two 4x8 Racks Pictured Eagle Industrial Group, Inc. 25471 Arctic Ocean Drive Lake Forest, CA 92630 877.655.3443 888.313.9228
More informationSIMPLAIR PIPING. www.irtools.com 1-800-376-TOOL
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More informationmulti-axis system ROBOTRAX cable 3D cable carrier system carrier
3D cable multi-ais 3D cable carrier system carrier system Key Features: Perfect for 3D multi-ais movement applications. Maintains a pre-determined minimum bend radius Open-style design allows for easy
More informationKnürr Smaract. Knürr Smaract. CompactRack
CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.
More informationEnsat. Self-tapping inserts SOLID BODIES LINE
Ensat Self-tapping inserts SOLID BODIES LINE Index DESCRIPTION Page Presentation 3 Materials and Applications 4 Features 5 Preparing the receiving hole 6 Tools Codes 7 Ensat Series 302 Ensat Series 303
More informationSafety Grating GSSG-13R GRIP STRUT. safety grating
Safety Grating GSSG-13R safety grating Table of Contents & Advantages Advantages.................................................... 2 Proof Of Performance...................................... 3 General
More informationRittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS
Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS STANDARD & ECONOMICAL BasicRack A complete low-cost, high-quality basic equipment management system. Design Six web channel holes per side allow
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationInstallation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-...
Installation guide for the SafeLine type anchorage device Tested in compliance with EN 795: 1996 No.: SE-... Version: 09.10.2008 SE 67 Subject to technical alterations! Contents 1. General information
More informationSECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes seismic restraints and other earthquake-damage-reduction measures for electrical
More informationOwner's Manual & Assembly Instructions
Owner's Manual & Assembly Instructions PM01 BASE KIT Model No. FDN1014 717090311 CAUTION: SOME PARTS HAVE SHARP EDGES. CARE MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES TO AVOID A MISHAP. FOR SAFETY
More informationAISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043
More informationBUILD A TABLETOP LOOM
BUILD A TABLETOP LOOM From 1" x 2" stock (actual 3/4" x 1"1/2) cut: 4 pieces 15" long 4 pieces 5"1/2 long Use the above to make 2 frames for the front and back of the loom. From 1" x 4" stock (actual 3/4"
More informationRetail Reception kiosk
Retail Reception kiosk put 42" corner post in below 66" to allow post to extend above kiosk for raised box sign Mini cantilever option - 24" overhead support leg Mini cantilever option - 24" overhead 66/48E
More information5 G R A TINGS ENGINEERING DESIGN MANUAL. MBG Metal Bar Grating METAL BAR GRATING MANUAL MBG 534-12 METAL BAR GRATING NAAMM
METAL BAR NAAMM GRATNG MANUAL MBG 534-12 5 G R A TNG NAAMM MBG 534-12 November 4, 2012 METAL BAR GRATNG ENGNEERNG DEGN MANUAL NAAMM MBG 534-12 November 4, 2012 5 G R A TNG MBG Metal Bar Grating A Division
More informationIMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
More informationIHSS-N1 WELDED HONEYCOMB CORE SPECIFICATION. Generated: Sergiy Papyshev Engineering. Approved: Don Prysi Manufacturing. Approved: Merzuk Ramic Quality
IHSS-N1 WELDED HONEYCOMB CORE SPECIFICATION Generated: Sergiy Papyshev Engineering Approved: Don Prysi Manufacturing Approved: Merzuk Ramic Quality Approved: Steven Barnett Administrative DATE DATE DATE
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=600mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationSelecting and Sizing Ball Screw Drives
Selecting and Sizing Ball Screw Drives Jeff G. Johnson, Product Engineer Thomson Industries, Inc. Wood Dale, IL 540-633-3549 www.thomsonlinear.com Thomson@thomsonlinear.com Fig 1: Ball screw drive is a
More informationHollow or Cinder Block Wall Mount Job Aid
Summary This Job Aid covers: Hollow or Cinder Block Wall Mount Job Aid Hollow or Cinder Block wall Mount Bracket Installing the Mount Bracket into Cinder Block This Job Aid supports the Technician audience.
More informationSTANDARD OPEN PATIO COVER
STANDARD OPEN PATIO COVER BUILDING & SAFETY DIVISION 201 E. LA HABRA BLVD. LA HABRA, CA 90631 62-90-9710 Call Before You Dig 1-800-227-2600 PLEASE NOTE: This information Bulletin is made available to assist
More informationINSTRUCTIONS THOROUGHLY BEFORE BEGINNING***************
Bill of Materials: RAC0012 Green Wing Aerodynamic Skirt Kit Item Part Number Description Quantity 1 RMC0218 Gen 2 Trailer Skirt Roadside 1 2 RMC0219 Gen 2 Trailer Skirt Curbside 1 3 RMC0041 Trailer Skirt
More informationR310EN 2225 (2011.04) The Drive & Control Company
Ball Rail Systems Resist NRII R310EN 5 (011.04) he Drive & Control Company R310EN 5 (011.04) Ball Rail Systems Resist NR II Bosch Rexroth AG 3 Ball Rail Systems Resist NRII General Product Description
More informationmechanics PP-Profiles Panel Profiles PT-Profiles T-Groove Plates RE-Profiles Rectangular Profiles PU-Profiles Universal Profiles
Overview PP-Profiles Panel Profiles PP 50 PP 100 PP 150 PP 200 PP 0 B 4 PT-Profiles T-Groove Plates B 5 PT PT 50 RE-Profiles Rectangular Profiles B 6 RE 15 RE 30 RE40 RE65 PU-Profiles Universal Profiles
More informationAUTOMATION TOOLING CATALOG ENGINEERING DATA & COMPONENT SELECTION CATALOG # 62612
AUTOMATION TOOLING CATALOG ENGINEERING DATA & COMPONENT SELECTION CATALOG # 62612 Len & Jerry's specializes in finding solutions to reduce: Weight deflection/vibration frequency cost Problems found frequently
More informationFRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
More informationOne and Two-piece Torque Rods and Replacement Bushings LIT NO: 45745-148
One and Two-piece Torque Rods and Replacement Bushings LIT NO: 45745-148 DATE: January 2008 REVISION: B HENDRICKSON ULTRA ROD PLUS Torque Rod Bonded Bushing Provides Longer Life Bonding makes a better
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16. Please refer to the publication in its entirety for complete details on this product
More informationCAST IRON THE BASICS. Heatline - Cast Iron Radiators SMOOTH FLAT FILE TO REMOVE ANY SWARF. ONE TIME. ASSEMBLY. JOINTS SHOULD BE TIGHTENED.
CAST IRON THE BASICS 1. DO NOT LIFT ON YOUR OWN. 2. ONLY LIFT THE RADIATOR VERTICALLY. 3. DO NOT LIFT MORE THAN 8/10 SECTIONS AT ANY ONE TIME. 4. POSITION THE RADIATOR BEFORE FINAL ASSEMBLY. 5. THIS PRODUCT
More informationTires and Wheels. Tires and Wheels. Common Tire Terms. Determing Wheel Offset. Determing Bolt Pattern. Dual Wheel/Rim Spacing
ommon Tire Terms Section : Aspect Ratio: Range: Overall Diameter: Static Radius: Design : width of a tire in millimeters measured on a rim with optimal width. A dimensional relationship of the tire s section
More informationAccessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
More information-1- SPECIFICATIONS 002085 CONE SETTER PLATFORM ATTACHMENT INDEX
-1-002085 CONE SETTER PLATFORM ATTACHMENT INDEX I. GENERAL EQUIPMENT : A. Intent Statement B. Cone Setter Platform II. III. 1. Understructure Frame 2. Mounting Components 3. Paint 4. Basket 5. Labels 6.
More informationThe entire document shall be read and understood before proceeding with a test. ISTA 3B 2013 - Page 1 of 35
Packaged-Products for Less-Than-Truckload (LTL) Shipment ISTA 3 Series General Simulation Performance Test PROCEDURE VERSION DATE Last TECHNICAL Change: NOVEMBER 2012 Last EDITORIAL Change: JANUARY 2013
More informationTechnical Services & Capabilities
Technical Services & Capabilities Machining Welding MIG TIG Robotic TIG Friction Stir Welding Solution Heat Treat & Artificial Aging Assemblies & Fabrication Bike Frame Specialists Technical Services Product
More informationCedar Cottage Doghouse Plans
Overlapping cedar shingles add an element of charm to this medium size doghouse. The walls, floor, and trim are constructed of solid cedar, making it naturally weather resistant and provides excellent
More information9. Direct screwing into plastics and metal
9. Direct screwing into plastics and metal 9.1 Direct screwing into plastics The use of plastics is gaining in importance through new application possibilities. Optimised thread pitch Advantages here are
More informationCable Runways & Accessories
SB17U SB13AL SB17 SB17T SB117 SB17HRB SB2107 SB2101A SB17VRB SB2110A SB2129 SB2129SD SB130 SB2221 SB126 SB2118 SB119 SB2105 113 Cooper B-Line manufactures a wide variety of high quality cable pathway products
More informationR O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 6 13 11 MOUNTING BRACKET KIT Cable Tab 14 12 7 15 9 Cable Tab 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM
More informationSFI SPECIFICATION 28.1 EFFECTIVE: SEPTEMBER 23, 2011 *
SFI SPECIFICATION 28.1 EFFECTIVE: SEPTEMBER 23, 2011 * PRODUCT: Polymer (Foam-Filled) Fuel Cells 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards
More informationInstallation Instructions For Slider Casement Air Conditioners
Installation Instructions For Slider Casement Air Conditioners NOTE: These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or installation in a metal CASEMENT
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationCheck for deteriorated, shifting or missing tie-down pads. Replace if needed.
C C 0 5 C H A S S I S F R A M E Chassis Frame Overview The Blue Bird Vision s chassis frame consists of two main C-channel rails which run the entire length of the bus, and several different kinds of cross
More information