IBS, INCORPORATED Index Hex Nuts
|
|
|
- Joseph Alban Williamson
- 7 years ago
- Views:
Transcription
1 IB, ICORPORAD Index ex uts A Assortments Machine crew ized uts & Washers B-2 Machine crew uts, Wing uts & Cap uts Assortmen B-2 F Fasteners Cap uts B-10 Coupling uts B-11 Flange uts tover B-5 eavy ex uts B-11 ex Jam uts B-9 ex uts Finished B-6 Grade 5 B-6 Grade 8, Finished B-5 i-alloy B-3 igh uts Grade 8 B-15 Kep uts B-12 Lock uts, i-alloy Coarse B-4 Fine B-5 Machine crew uts B-12 yloc Jam uts B-13 ylon Locknuts Grade 5, Zinc Plated B-11 Grade 8, Plain B-10 Grade 8, Zinc Yellow B-10 ee uts B-16 orque Locknuts Grade C B-8 Whiz Lock uts B-12 Wing ut - yloc B-15 Wing uts B-16 uts, Lock Grade C B-8 igh-alloy.c. B-4 L9 tover B-4 PFC9 B-4 igh-alloy.f. B-5 L9 tover B-5 PFC9 B-5 ylon, Grade 5 Zinc Plated B-11 ylon, Grade 8 Plain B-10 Zinc Yellow B-10 uts, Miscellaneous Cap B-15 Coupling B-14 Jam ex B-13 yloc B-13 Kep B-12 Machine crew B-12 ee B-16 Whiz Lock B-12 Wing B-16 Wing ut yloc B-15 uts, Flange tover B-6 uts, ex B-3 Finished Grade 5 B-9 Grade 8 B-7 Zinc Plated B-9 Grade 8 igh uts B-15 eavy B-14 igh-alloy B-3 B-1 he Mark of Our Quality is in Our ervice
2 IB, ICORPORAD Assortments Z02 Machine crew uts, Wing uts & Cap uts IB o. 126R 18 Items Pcs. Machine crew uts, Wing uts & Cap uts Assortment o. 126R CAP ZP MACI CRW MACI CRW 8-32 WIG ZP 1/4-20 WIG ZP ZP ZP CAP ZP 6-32 MACI CRW MACI CRW WIG ZP 5/16-18 WIG ZP ZP ZP /4-20 CAP P 8-32 MACI CRW 1/4-20 MACI CRW WIG ZP 3/8-16 WIG ZP ZP /16-18 CAP P MACI CRW 5/16-18 MACI ZP CRW Machine crew ized uts & Washers IB o. 392R 20 Items 2600 Pcs Machine crew uts & Washers Assortment o. 392R #4 MDIM #6 MDIM #8 MDIM #10 MDIM #12 MDIM 1/4 MDIM LOCKWAR ZP LOCKWAR ZP LOCKWAR ZP LOCKWAR ZP LOCKWAR ZP LOCKWAR ZP #4 A FLA WAR ZP #6 A FLA WAR ZP #8 A FLA WAR ZP #10 A FLA WAR #12 A FLA WAR 1/4 A FLA WAR ZP ZP ZP MACI 6-32 MACI 8-32 MACI MACI MACI 1/4-20 MACI CRW ZP CRW ZP CRW ZP CRW ZP CRW ZP CRW MACI 6-32 YLOC ZP 8-32 YLOC ZP YLOC ZP YLOC ZP 1/4-20 YLOC ZP CRW ZP B-2 he Mark of Our Quality is in Our ervice
3 IB, ICORPORAD igh-alloy ex uts B01 igh-alloy ex uts ational Coarse & ational Fine Cadmium-plated and dichromate-coated to improve lubrication for controlled tightening. 20% stronger than A Grade 8! se of special alloys and heat treatments reduces the danger of split nuts and stripping of nuts. op View ide View L9 ex ut AIOAL COAR IB o. ap ize WAF hickness Qty /4-20 7/16 1/ / /2 19/ /8-16 9/16 3/ / /16 7/ /2-13 3/4 1/ / /8 9/ / /16 41/ / /8 3/ / /16 7/ / / /16 1-5/32 A / /8 1-17/64 A / /4 1-1/2 A AIOAL FI IB o. ap ize WAF hickness Qty /4-28 7/16 1/ / /2 19/ /8-24 9/16 3/ / /16 7/ /2-20 3/4 1/ / /8 9/ / /16 41/ / /8 3/ / /16 7/ / / /16 1-5/32 A / /8 1-17/64 A / /4 1-1/2 A B-3 he Mark of Our Quality is in Our ervice
4 IB, ICORPORAD igh-alloy Lock uts B03 igh-alloy Lock uts ational Coarse & ational Fine Cadmium plated and dichromate coated - ensures uniform tightening Inhibits loosening caused by vibration Reduced danger of split or stripped nuts op View ide View L9 OVR AIOAL COAR IB o. ap ize W.A.F. hickness Qty /4-20 7/16 1/ / /2 19/ /8-16 9/16 3/ / /16 7/ /2-13 3/4 1/ / /8 9/ / /16 41/ / /8 3/ / /16 7/ / / /16 1-5/32 A / /8 1-17/64 A / /4 1-1/2 A ine dashes identify eat reated L9 tover locknuts. Features registered stover design. op View Bottom View L9 OVR AIOAL FI IB o. ap ize W.A.F. hickness Qty /4-28 7/16 1/ / /2 19/ /8-24 9/16 3/ / /16 7/ /2-20 3/4 1/ / /8 9/ / /16 41/ / /8 3/ / /16 7/ / / /16 1-5/32 A / /8 1-17/64 A / /4 1-1/2 A ide View Features unique trilock design PFC9 AIOAL COAR IB o. ap ize W.A.F. hickness Qty /4-20 7/ / / /8-16 9/ / / /2-13 3/ / / / / / / / / / PFC9 AIOAL FI IB o. ap ize W.A.F. hickness Qty /4-28 7/ / / /8-24 9/ / / /2-20 3/ / / / / / / B-4 he igh-alloy Fastening ystem is designed and manufactured to be used as a system. o substitutions or alterations are to be made of the bolt, nut, washer or finish. he Mark of Our Quality is in Our ervice
5 IB, ICORPORAD Grade C Lock uts B07 & tover Flange uts B05 Prevailing orque Locknuts Grade C trongest locking power available Ideal for applications where shock and vibration is a problem his patented, prevailing torque locknut gets its exceptionally high locking ability from the controlled deformation of its upper threads. he design is unique in that it features a true round shape at the bearing face, which allows for easier starting, and changes to an oval shape at the top. As the nut is tightened the deformed top threads are deflected, causing them to conform to the shape of the screw. his creates an increased frictional drag and results in increased locking power. he pring Action (top threads conforming to the screw shape) distributes the clamping forces over the largest possible surface area. his ensures minimum wear, burnishing, and avoids permanent set. his balanced design is what provides the locknut with its high performance and reusability qualities. AIOAL COAR IB o. ize W.A.F. Qty /4-20 7/ / / /8-16 9/ / / /2-13 3/ / / / / / / / / /2 10 tover Flange uts Grade G 150,000 psi ensile trength Furnished with a phosphate and oil finish for lubrication During assembly. nlarged countersink on bearing face to facilitate starting. implifies assembly by eliminating the need for washers. Lower bearing stress for irregular holes. Greater bearing area. Better coverage for irregular holes. AIOAL FI IB o. ize W.A.F. Qty /4-28 7/ / / /8-24 9/ / / /2-20 3/ / / / / / / / / /2 10 F IB o. ize C W.A.F F Flange Diam D Overall hickness B ex eight K Flange hickness /8-16 9/ /2-13 3/ / / / / /2-20 3/ / / / / B-5 he Mark of Our Quality is in Our ervice Qty c D B K
6 IB, ICORPORAD Finished ex uts Zinc Plated Grade 8 Finished ex uts (B06) 150,000 psi Minimum ensile trength xceeds original equipment specifications. Made of igh trength Alloy teel giving them 30% more holding power. liminates stripping threads, vibration, heat and stress fatigue. Plated nuts are Zinc and Yellow Baked. Grade 8 ex ut Markings AIOAL COAR AIOAL FI IB o. IB o. ize W.A.F. Qty Plain Plated Plain Plated ize W.A.F. Qty /4-20 7/ /4-28 7/ / / / / /8-16 9/ / / / / / /2-13 3/ /2-20 3/ / / / / / / / / / / / / / / / / / / / /16 A / /16 A / /8 A / /8 A / /4 A Grade 5 ex uts (B10) Proof Load 120,000 psi. ardness RB Zinc Plated to protect against corrosion. Manufactured and ested according to AII pecifications. AIOAL COAR IB o. ize W.A.F. Qty /4-20 7/ / / /8-16 9/ / / /2-13 3/ / / / / / / / / /2 10 AIOAL FI IB o. ize W.A.F. Qty /4-28 7/ / / /8-24 9/ / / /2-20 3/ / / / / / / / / /2 10 B-6 he Mark of Our Quality is in Our ervice
7 IB, ICORPORAD Finished ex uts Zinc Plated Finished ex uts (B09) pecially formulated high quality nut steel manufactured on the most modern close tolerance cold forming equipment. Dependability insured by strict quality control. Zinc plating protects against rust and corrosion. AIOAL COAR IB o. ize W.A.F. Qty /4-20 7/ / / /8-16 9/ / / /2-13 3/ / / / / / / / / / / /16 A / /8 A / /4 A AIOAL FI IB o. ize W.A.F. Qty /4-28 7/ / / /8-24 9/ / / /2-20 3/ / / / / / / / / /2 10 B-7 he Mark of Our Quality is in Our ervice
8 IB, ICORPORAD ylon Locknuts Grade 8 ylon Locknuts (B08) he locking collar, which has an inside diameter smaller than the diameter of the bolt, is un-threaded and elastic. his allows the bolt to impress a mating thread into the collar and the resulting compressive forces exert a constant friction grip on the bolt. As downward thrust is exerted the lower flanks of the bolt thread are brought into a firm metal-to-metal contact with the matching threads on the nut thus eliminating axial play which may normally occur. ven after repeated usage the elastic collar still retains its grip. Locks in any position on the bolt. Vibration and shock proof. Locking collar will not gall bolt thread. ylon seals out moisture and retards rust and corrosion of the thread area. his material is resistant to oil, fats, gasoline, and other destructive chemical agents. B-8 Plain (Black) AIOAL COAR IB o. Dimensions Zinc Yellow ap ize W.A.F. t. Qty /4-20 7/16 5/ / /2 11/ /8-16 9/16 29/ / /8 29/ /2-13 3/4 19/ / /8 41/ / /16 3/ / /16 7/ / /4 63/64 A /16 1-3/64 A Plain (Black) IB o. Zinc Yellow he Mark of Our Quality is in Our ervice AIOAL FI Description ap ize W.A.F. t. Qty /4-28 7/16 5/ / /2 11/ /8-24 9/16 29/ / /8 29/ /2-20 3/4 19/ / /8 41/ / /16 3/ / /16 7/ / /4 63/64 A /16 1-3/64 A Grade 2 ylon Locknuts (B12) Zinc Plated AIOAL COAR IB o. ap ize W.A.F. t. Qty /4 5/ /16 11/ /32 7/ /8 15/ A /16 5/ /4-20 7/16 5/ / /2 11/ /8-16 9/16 29/ / /8 29/ /2-13 3/4 19/ / /8 41/ / /16 3/ / /16 7/ / /4 63/ /16 1-3/64 10 AIOAL FI IB o. ap ize W.A.F. t. Qty /8 15/ /4-28 7/16 5/ / /2 11/ /8-24 9/16 29/ / /8 29/ /2-20 3/4 19/ / /8 41/ / /16 3/ / /16 7/ / /4 63/ /16 1-3/64 10
9 IB, ICORPORAD Miscellaneous uts B35 ex Jam uts Jam nuts are thin nuts used under full-sized nuts to develop locking action. Zinc plated to protect against rust and corrosion. AIOAL COAR IB o. ap ize WAF hickness Qty /4-20 7/16 5/ / /2 3/ /8-16 9/16 7/ / /16 1/ /2-13 3/4 5/ / /16 3/ / /8 27/64 25 yloc Jam uts hin jam nuts with nylon locking rings Lock in any position on bolt Zinc plated to prevent rust and corrosion AIOAL FI IB o. ap ize WAF hickness Qty /4-28 7/16 5/ / /2 3/ /8-24 9/16 7/ / /16 1/ /2-20 3/4 5/ / /16 3/ / /8 27/64 25 AIOAL COAR IB o. ap ize WAF hickness Qty /4-20 7/16 3/ / /2 1/ /8-16 9/16 17/ /2-13 3/4 5/ / /16 3/ / /8 13/32 25 AIOAL FI IB o. ap ize WAF hickness Qty /4-28 7/16 3/ / /2 1/ /8-24 9/16 17/ /2-20 3/4 5/ / /16 3/ / /8 13/32 25 B-9 he Mark of Our Quality is in Our ervice
10 IB, ICORPORAD Machine crew uts B14 / Misc. uts B35 Machine crew uts Meets or exceeds American tandard B Zinc plated for corrosion resistance IB o. ap ize WAF hickness Pkg Qty /4 3/ /16 7/ /32 1/ /8 1/ /8 1/ /16 5/ /4-20 7/16 3/ / /2 7/ Kep uts Combination standard hex nuts and standard lockwasher. liminates putting separate lockwasher in position. Lockwasher spins free under tension, preventing surface marring or galling. IB o. ap ize WAF hickness Pkg Qty /16 7/ /32 1/ /8 1/ /8 1/ /4-20 7/16 3/ / /2 17/ /8-16 9/16 3/8 100 Cap uts ickel Plated IB o. ap ize Pkg Qty / / / Whiz Lock uts errated flange provides locking action IB o. ap ize Flange O.D. Pkg Qty / / / / /8-16 3/4 100 igh uts Grade 8 150,000 psi min. tensile strength pecial design gives added strength. 40% More thread engagement. 40% igher than ordinary nuts. IB o. ap ize W.A.F. eight Pkg Qty / /8 17/ /2-20 3/4 11/ / /16 27/ / / / /4 1-5/ /16 1-5/16 10 eavy ex uts eavier and wider to provide greater bearing area. Ideal for heavy duty applications with severe stress and vibration. xcellent for oversize holes and certain boiler applications. Conforms to all industry standards IB o. ap ize W.A.F. eight Pkg Qty /4-20 1/2 13/ / /16 19/ / /16 23/ / /4 27/ /2-13 7/8 31/ / /16 39/ / /4 47/ / /16 55/ /8 63/64 25 B-10 he Mark of Our Quality is in Our ervice
11 Coupling uts Zinc plated to protect against rust and corrosion IB, ICORPORAD Miscellaneous uts B35 IB o. ap ize Length W.A.F. Pkg Qty 6011 * 1/4-20 7/8 3/ * 5/ /8 7/ * 3/ /8 1/ * 1/ /4 5/ / /8 13/ / /4 3/4 20 * conomy - shorter in length than standard units Wing uts Cold forged steel. Zinc plated for protection from rust and corrosion. Ideal for applications where quick hand assembly is desired or needed, i.e.: > Light or precision machinery: eliminates the chance of over-tightening, causing thread strippage or parts damage. > Power ools: circular saw blade angle adjustment. > Carburetor Air Filter old Down ut and more! IB o. ap ize Pkg Qty / / / / ee uts 3 Prong - Wood ype Pronged nut stays where it's put. Zinc plated for protection from rust and corrosion. Great for picnic tables and wooden lawn furniture. IB o. ap ize Barrel Flange Pkg Qty /4 9/ /4 3/ /16 23/ /4-20 7/16 25/ /8-16 7/16 1-1/ Wing ut - yloc Zinc Plated to protect against rust and corrosion. ylon locking ring locks in any position on bolt. Locking collar will not gall bolt thread or remove plating. Vibration and shock proof. IB o. ize Pkg Qty / B-11 he Mark of Our Quality is in Our ervice
12 IB, ICORPORAD B-12 he Mark of Our Quality is in Our ervice
Two most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.
Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical
LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
These features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
Manufacturing, Supply & Quality Plan for Tower Bolts. SL Tower Bolt Market Penetration
Manufacturing, Supply & Quality Plan for Tower Bolts Project: SL Tower Bolt Market Penetration Document History Version Date Original Document First Submission Feb 9, 2013 Rev1 Requested Revisions Comments
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
AN EXPLANATION OF JOINT DIAGRAMS
AN EXPLANATION OF JOINT DIAGRAMS When bolted joints are subjected to external tensile loads, what forces and elastic deformation really exist? The majority of engineers in both the fastener manufacturing
Bolting Galvanized Steel
Bolting Galvanized Steel This chapter gives information on the characteristics, advantages and economics of bolted galvanized structures and zinc coated fasteners, and offers comment on bolting procedures
DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
Screw Thread Design. Rev. 3-4-09
Screw Thread Design Screw Thread Fundamentals A screw thread is defined as a ridge of uniform section in the form of a helix on either the external or internal surface of a cylinder. Internal threads refer
Bolted Joint Design. Mechanical Properties of Steel Fasteners in Service
Bolted Joint Design There is no one fastener material that is right for every environment. Selecting the right fastener material from the vast array of those available can be a daunting task. Careful consideration
Technical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54
Technical Data 7. Bearing Fits 7.1 Interference For rolling s the rings are fixed on the or in the housing so that slip or movement does not occur between the mated surface during operation or under. This
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
Installation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-...
Installation guide for the SafeLine type anchorage device Tested in compliance with EN 795: 1996 No.: SE-... Version: 09.10.2008 SE 67 Subject to technical alterations! Contents 1. General information
NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
I BEAM TRACK INSTALLATION
PDQ 0/700 FESTOON SYSTEM INSTALLATION AND MAINTENANCE INSTRUCTIONS INTRODUCTION The PDQ Festoon System was designed to run on one of three sizes of I-beams: S x., S8 x 8. and S x.. System trolleys must
DELTA PT. Calculable Extra Performance
DELTA PT Calculable Extra Performance DELTA PT The Screw for Thermoplastics Optimal material flow Superior vibration resistance High torsional strength and tensile strength Calculable performance The Fastener
Machine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
Pipe Thread Types and Designations
Pipe Thread Types and Designations Overview: Different types of screw threads have evolved for fastening, and hydraulic systems. Of special concern are plastic-to-metal, taper/parallel threaded joints
Assembly and Usage Instructions
Assembly and Usage Instructions A Product 5885 West Van Horn Tavern Road Columbia, MO 65203 www.caldwellshooting.com Instruction #1001667 Limited Warranty Every Caldwell product is warrantied to be free
SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
EMP Part # Categor Description
EMP Part # Categor y Description Qty Available as of 01/03/13 Cost/C 001014 SHC 1/4-20x1/2 J429 GR 5 Hex Hd Cap Screw Zinc Yellow 3,300 $1.41 001079 SHC 1/4-20x1 1/4 J429 GR 8 Hex Hd Cap Screw Black Oxide
Trouble shooting guide
guide DPR/PSR Leak Insuffi ciently tightened, shallow bite Tighten the nut according to correct number of turns, direct assembly only for maintanance/repair, use of recommended pre-assembly machines Mark
Section M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
Sports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
Operating Instructions Drill rig DRU160
Operating Instructions Drill rig DRU160 Index 000 / 001 Original operating instructions 10988825 en / 20.10.2009 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
LiftAlloy Chain Slings
CHAIN SLING BASICS Slings Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations. chain slings, available in 80 for 7/32" and 7/8"- /4" and 00 for 9/32"-3/4", are
Fire Hydrant Troubleshooting
Fire Hydrant Troubleshooting Pulsation or chatter during opening and flow of water from hydrant. Loose condition in stem at lower valve plate nut. Tighten lower valve plate nut and secure with SS lock
Drive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
SERIES NG 1800 STRUCTURAL STEELWORK
MANUAL OF CONTRACT DOCUMENTS FOR HIGHWAY WORKS VOLUME 2 NOTES FOR GUIDANCE ON THE SPECIFICATION FOR HIGHWAY WORKS SERIES NG 1800 STRUCTURAL STEELWORK Contents Clause Title Page NG 1800 (08/14) General
LEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
Experience In Motion. Valtek Spring Cylinder Linear Actuators
Experience In Motion Valtek Spring Cylinder Linear Actuators Valtek Spring Cylinder Linear Actuator Flowserve spring cylinder linear actuators are powerful, compact, high-performance pneumatic actuators
TITAN 13 x 2 ½ BRAKES
INSTALLATION INSTRUCTION AND SERVICE MANUAL Actuator/Trailer Dealer - Please provide these instructions to the consumer. Consumer - Read and follow these instructions. Keep them with the trailer for future
CHIPPING HAMMERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
CHIPG HAMMERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1056 Rev A CHIPG HAMMERS TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. On 650 Series tools, tighten the handle
American National, Unified Screw Threads
C h a p t e r 9 American National, Unified Screw Threads In this chapter, you will learn the following to World Class standards:! Why Use Fasteners! The Text Designation for the Unified National Thread!
Section 6 Brake Drum Failure Analysis. Brake Drum Wear Conditions. What is Normal Wear? What is Deep or Excessive Wear? WARNING. Deep, Uniform Wear
Section Brake Drum 6 Failure Analysis WARNING To prevent serious eye injury, always wear safe eye protection when you perform vehicle maintenance or service. Figure 6.1 ASBESTOS AND NON-ASBESTOS FIBERS
1-Way Bracket Assemblies
-Way Bracket Assemblies The Astro-Brac in its various configurations is a truly universal system for mounting signals. The Astro-Brac is designed to facilitate the mounting of any size or combination of
A Short Guide To Metric Nuts and Bolts
A Short Guide To Metric Nuts and Bolts Answers to the most Frequently Asked Questions Standard and Fine Pitch Threads How to identify nut and bolt strength grades How nut and bolt strength grades compare
Operations and Instruction Manual Might Swivel - Part # 310273 Concrete and Steel Anchorage Connector ANSI Z359.1 10,000 lbs / 44kn
Safety.. Operations and Instruction Manual Might Swivel - Part # 310273 Concrete and Steel Anchorage Connector ANSI Z359.1 10,000 lbs / 44kn Description: Technical: Zinc plated forged heat treated steel,
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
Valu Guide Sheaths. Valu Guide Inserts. Optional Valu Guide Inserts. Typical Properties of Valu Guide Rail. and Hardware.
14 gauge stainless steel The Original, Long Life Sanitary Guide Rail Valu Guide rail incorporates two outstanding materials: stainless steel and UHMW. The 14 ga. stainless steel sheath provides rigid streamlined
CRITERIA FOR PRELOADED BOLTS
National Aeronautics and Space Administration Lyndon B. Johnson Space Center Houston, Texas 77058 REVISION A JULY 6, 1998 REPLACES BASELINE SPACE SHUTTLE CRITERIA FOR PRELOADED BOLTS CONTENTS 1.0 INTRODUCTION..............................................
Metric System & Specifications
Metric System & Specifications Throughout history, people have been trying to limit the number of measurement systems. Today, only two systems, inch-pound and metric, are predominate in most industrial
PAAM COMMERCIAL PRIVATE LIMITED
METAL PACKAGING We at Paam Group have been providing vast range of packaging products to our customers based on their preferences, needs and specifications. We provide all the materials required in metal
STIHL Precision Series Hand Tools
STIHL Precision Series Hand Tools Spare Parts List A PH 80 Hedge Shear M PP 900/700 Pole Pruner Head Assembly B PL 0 Lopper N PP 900 Pole Pruner Head Parts C PL 0 Lopper O PS 0 Pruning Saw D PL 0 Lopper
PUSH-PULL CABLES CONTROL SYSTEMS
ISO 9001 CERTIFIED PUSH-PULL CABLES CONTROL SYSTEMS WESCON PRODUCTS COMPANY A subsidiary of LATSHAW ENTERPRISES, INC. WESCON'S PUSH-PULL CONTROL SYSTEMS Push-Pull Cable Ends Wescon Push-Pull Cable Assemblies
POWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
Coaxial Cable Installation Accessories
Installation Instructions Bulletin 37608 Coaxial Cable Installation Accessories Hoisting Grips for Coaxial Cable and Elliptical Waveguide READ ALL WARNINGS AND INSTRUCTIONS BEFORE INSTALLATION Antenna
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING
Working Drawing and Assemblies. Chapter 10
Working Drawing and Assemblies Chapter 10 Objectives 1.Define working drawings. 2. Describe how working drawings are used in industry. 3. List the major components of a complete set of working drawings.
Chief S21M PARTS MANUAL. 2005 Chief Automotive Technologies
Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date
Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth
Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Bulk deformation forming (rolling) Rolling is the process of reducing
Hose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
Conceptual Design of Buildings (Course unit code 1C2)
(Course unit code 1C2) Module C Design of Steel Members J.P. Jaspart (University of Liège) 520121-1-2011-1-CZ-ERA MUNDUS-EMMC Bolts are the main type of fasteners used in steel joints. The main geometrical
PARTS FOR OTHER EMBROIDERY MACHINES
PARTS FOR OTHER EMBROIDERY MACHINES PARTS FOR SINGER 114K & 114W, TREASURE and other "FREE HAND" CHAINSTITCH EMBROIDERY MACHINES - 8056-2 Nipple #2-8056-3 Nipple #3-8056-4 Nipple #4-8056-5 Nipple #5-8056-6
How To Launch A Rocket From A Formica
Building the Basic Bottle Rocket Launch Pad Materials: -Formica double-sink countertop cutout. This can be easily and cheaply obtained from a local company that manufactures and/or installs countertops.
Step by Step instructions How to screw in wood and plastic
Step by Step instructions How to screw in wood and plastic Different screw heads As well as the simple slotted screw head, there are three different types of screw heads into which the screwdriver or bit
Fish Grader User Manual
Fish Grader User Manual 1400 Fish Grader Contents Basic Parts... 2 Set up... 3 Control board needs to be setup... 3 Adjustable legs... 3 Adjustable Inlet cute... 3 Motor... 3 Control-board... 4 Remote
60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
RING JOINT SYSTEMS 207
RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI
The Ensat self-tapping threaded insert...
The Ensat selftapping threaded insert... Ensat is a selftapping threaded insert with external and internal thread, cutting slots or cutting bores. A continuous process of further development has brought
HOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
37 JIC Flare (Nuts) 304C (070112) 306 (070118) 318 (070110) Pg. 22-75-160 Bulkhead Locknut (Use with #2700) Pg. 23 Tube Nut (Use with #319)
37 JIC Flare (Nuts) Components Assembled The 37 JIC (Joint Industrial Council) Flare is a reliable, straight thread, single-flare design that is used world-wide. It is popular in many applications and
3/4 PIPE CLAMP WITH STAND
3/4 PIPE CLAMP WITH STAND Model 94053 ASSEMBLY AND OPERATING INSTRUCTIONS (3/4 DIAMETER PIPE NOT INCLUDED.) 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com
INSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb
INSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb NOTE: Progress Technology products should only be installed by a qualified licensed mechanic experienced in the installation
Stainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
Engineering Fundamentals of Threaded Fastener Design and Analysis
Engineering Fundamentals of Threaded Fastener Design and Analysis By Ralph S. Shoberg, P.E., Director of Technology, PCB Load & Torque, Inc. 1 Table of Contents 1.0 Introduction: Engineering Fundamentals
product manual 08.09 H-4210A PORTABLE STATIC CONE PENETROMETER
08.09 product manual H-4210A PORTABLE STATIC CONE PENETROMETER PORTABLE STATIC CONE PENETROMETER GENERAL INFORMATION The H-4210A Static Cone Penetrometer is an unparalleled device for measuring soil consistency.
Black Wolf POCKET BILLIARD TABLE INSTALLATION MANUAL. SERVICE DEPARTMENT P.O. BOX 68 BRISTOL, WI 53104
Black Wolf TM POCKET BILLIARD TABLE INSTALLATION MANUAL www.brunswickbilliards.com SERVICE DEPARTMENT P.O. BOX 68 BRISTOL, WI 53104 51-905710-000 SEPTEMBER 2010 NOTE: Please use the instructions in this
Ductile Iron Pipe Couplings
J-9 Pipe 1 2 Straight and Transition Ductile offer an easy and economical way of joining whether the is of the same nominal and/or type or different at each coupling. couplings will handle most of your
TEC APO140. This telescope is closer to optical perfection more than any instrument I have ever used before. R.Renzi, Italy.
140 manuals 2013_110 manuals 1/13/2013 10:40 PM Page 1 TEC APO140 This telescope is closer to optical perfection more than any instrument I have ever used before. R.Renzi, Italy. OWNER S MANUAL 2013 140
STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
So You Want to Think Lean? Jürgen Hilbinger and Martin Schreiber
So You Want to Think Lean? Jürgen Hilbinger and Martin Schreiber INA reprint November 2000 So You Want to Think Lean? New High-Precision Bearing Unit for Cost-Effective Ball Screw Supports in the Small
Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1
16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 BD Adjustable Track Bar w/bracket Dodge 2500-3500 4WD Models 1994-2002 Dodge 1500 4WD Model 1994-2001 P/N# 1032011-F
The EJOT. Fastener. Predictable performance improvement for thermoplastics. EJOT The Quality Connection
The EJOT Fastener Predictable performance improvement for thermoplastics EJOT The Quality Connection Benefits of the EJOT DELTA PT The product Minimal radial tension due to optimized flank angle High clamp
DODGE USAF 200/300 Direct Mount Pillow Block Bearings
DODGE USAF 200/300 Direct Mount Pillow Block Bearings These instructions must be read thoroughly before installation or operation. WARNING: To ensure that drive is not unexpectedly started, turn off and
DYNA RIDER FOOTBOARD KIT
-J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
System. Stability. Security. Integrity. 150 Helical Anchor
Model 150 HELICAL ANCHOR System PN #MBHAT Stability. Security. Integrity. 150 Helical Anchor System About Foundation Supportworks is a network of the most experienced and knowledgeable foundation repair
Pump Shaft Sleeves - Stratford Engineering
Pump shafts are usually protected from erosion, corrosion, and wear at seal chambers, leakage joints, internal bearings, and in the waterways by renewable sleeves. The most common shaft sleeve function
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
9. Direct screwing into plastics and metal
9. Direct screwing into plastics and metal 9.1 Direct screwing into plastics The use of plastics is gaining in importance through new application possibilities. Optimised thread pitch Advantages here are
2" & 3" Poly Wet Seal Pump Instruction Manual
Always place the pump as close to the liquid to be pumped as possible. Keep the suction line short and with few bends. Keep the pump and engine on a level foundation. A poor foundation and a heavy suction
Mueller. Pipe Repair Products. A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION
Mueller Pipe Repair Products A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION MUELLER STAINLESS STEEL REPAIR CLAMPS Mueller offers a full line of stainless
NORSOK Compact Flange Installation and Assembly Procedure
NORSOK Compact Flange Installation and Assembly Procedure Hytorc Norway www.hytorc.no P.Nødland. Page 2 INTRODUCTION Scope The following main operations are covered in this section: Assembly/disassembly
Lathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
CAST IRON THE BASICS. Heatline - Cast Iron Radiators SMOOTH FLAT FILE TO REMOVE ANY SWARF. ONE TIME. ASSEMBLY. JOINTS SHOULD BE TIGHTENED.
CAST IRON THE BASICS 1. DO NOT LIFT ON YOUR OWN. 2. ONLY LIFT THE RADIATOR VERTICALLY. 3. DO NOT LIFT MORE THAN 8/10 SECTIONS AT ANY ONE TIME. 4. POSITION THE RADIATOR BEFORE FINAL ASSEMBLY. 5. THIS PRODUCT
758 Heavy-duty Ratchet Guy Wire Cutter
INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
Front axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
THREAD-FORMING SCREWS CUT COSTS WITH DIRECT FASTENING
RIBE Th r e a d-fo r m i n g Sc r e w s Di r e c t Fa s t e n i n g in St e e l, Cas t Ir o n, Al u m i n u m, Sh e e t Me t a l, Ma g n e s i u m an d Plastic THREAD-FORMING SCREWS CUT COSTS WITH DIRECT
Spiralock. The edge is in the wedge. Fasteners & Wire Thread Inserts. Product Specifications
piralock The edge is in the wedge Fasteners & Wire Thread Inserts Product pecifications A9100 REV B and IO 9001:2000 Certificate umber: FM77129 piralock Internal Locking Thread Form On the following pages
Review of the Application of Design Guideline VDI 2230 Using SR1 for PCs
11 th Annual Technical Conference on Fastening Technology Clemson University Radisson Hotel, Cleveland, Ohio, September 9, 1999 Review of the Application of Design Guideline VDI 2230 Using SR1 for PCs
Specifications for Programs: 737, 747, 757, 767, 777, 787
= Performed by GKN BAC 5000 AN General Sealing 6-262, 6-265, 6-267, 6-270 PSD for 787 Only: 6-242, 6-269, 6-271 PSD for 777 Only: 6-261,6-264, 6-266, 6-269, 6-271 BAC 5004 L Installation of Permanent Fasteners
Milling Chuck Features
Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings
Let s look at an example of where grade 5 and grade 8 bolts are subjected to single shear loads (winch plate reference).
Bolt s I have been on a quite a few online email lists over the last 7 years or so, basically since they first came out. From the original Jeep-L list to the XJ-list to the Rockcrawler.com board, a common
Fixtures - Parts - Accessories to shampoo bowls
Page 1??? - For what brand of bowl do you need parts??? Find out by looking on the bottom of the bowl, between the front and strainer, where molded in the bottom is the brand and model number. For example,
Mueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology