TeSys protection components Thermal-magnetic motor circuit-breakers types GV2, GV3 and GV7

Transcription

1 Presentation Thermal-magnetic motor circuit-breakers types GV2, GV and GV7 GV2-ME, GV2-P, GV-ME and GV7-R motor circuit-breakers are -pole thermal-magnetic circuit-breakers specifically designed for the control and protection of motors, conforming to standards IEC and IEC Connection These circuit-breakers are designed for connection by screw clamp terminals. Circuit-breaker GV2-ME can be supplied with spring terminal connections. These ensure secure, permanent and durable clamping that is resistant to harsh environments, vibration and impact and is even more effective when conductors without cable ends are used. Each connection can take two independent conductors. GV2-ME with screw clamp connections Operation O I O I O 2 1 GV2-ME with spring terminal connections GV2-P GV2-ME GV-ME GV2-P GV7-R GV2-ME and GV-ME: Pushbutton control. Energisation is controlled manually by operating the Start button I 1. De-energisation is controlled manually by operating the Stop button O 2, or automatically by the thermal-magnetic protection elements or by a voltage trip attachment. Control is manual and local when the motor circuit-breaker is used on its own. Control is automatic and remote when it is associated with a contactor. Protection of motors and personnel GV2-P: control by rotary knob. GV7-R: control by rocker lever. Energisation is controlled manually by moving the knob or rocker lever to position I 1. De-energisation is controlled manually by moving the knob or rocker lever to position O 2. De-energisation due to a fault automatically places the knob or rocker lever in the Trip position. Re-energisation is possible only after having returned the knob or rocker switch to position O. GV-ME Motor protection is provided by the thermal-magnetic protection elements incorporated in the motor circuit-breaker. The magnetic elements (short-circuit protection) have a non-adjustable tripping threshold, which is equal to about 1 times the maximum setting current of the thermal trips. The thermal elements (overload protection) include automatic compensation for ambient temperature variations. The rated operational current of the motor is displayed by means of a graduated knob 4. Personnel protection is also provided. All live parts are protected against direct finger contact. The addition of an undervoltage trip allows the circuit-breaker to be de-energised in the event of an undervoltage condition. The user is therefore protected against sudden starting of the machine when normal voltage is restored, since the Start button I has to be pressed to restart the motor. With the addition of a shunt trip, de-energisation of the unit can be remotely controlled. The operators on both open-mounted and enclosed motor circuit-breakers can be locked in the Stop position O by up to padlocks. Because they are suitable for isolation, these circuit-breakers, in the open position, provide an adequate isolation distance and indicate the actual position of the moving contacts by the position of the operators. Special features These motor circuit-breakers are easily installed in any configuration thanks to their universal fixing arrangement: screw fixing or clip-on mounting on symmetrical, asymmetrical or combination rails. GV7-R pages /24 to /9 pages /64 to /69 pages /70 and /71 /6 Schneider Electric

2 Thermal-magnetic motor circuit-breakers types GV2-ME and GV2-P GV2-ME GV2-P GV2-ME with pushbutton control and screw clamp terminals (1) Standard power ratings Setting Magnetic Reference Weight of -phase motors range tripping 50/60 Hz in category AC- of current 400/415 V 500 V 690 V thermal Id ± 20 % P Icu Ics P Icu Ics P Icu Ics trips (2) (2) (2) () kw ka kw ka kw ka A A GV2-ME ( ( GV2-ME ( ( GV2-ME ( ( 0.7 ( ( GV2-ME ( ( GV2-ME ( ( 0.55 ( ( GV2-ME ( ( 0.7 ( ( GV2-ME ( ( 0.55 ( ( 0.75 ( ( GV2-ME ( ( 1.1 ( ( GV2-ME ( ( 1.1 ( ( GV2-ME ( ( 1.5 ( ( GV2-ME ( ( 2.2 ( ( GV2-ME ( ( GV2-ME ( ( GV2-ME ( ( GV2-ME GV2-ME GV2-ME GV2-ME GV2-ME GV2-ME22 (4) GV2-ME GV2-P with rotary knob and screw clamp terminals Standard power ratings Setting Magnetic Reference Weight of -phase motors range tripping 50/60 Hz in category AC- of current 400/415 V 500 V 690 V thermal Id ± 20 % P Icu Ics P Icu Ics P Icu Ics trips (2) (2) (2) () kw ka kw ka kw ka A A GV2-P ( ( GV2-P ( ( GV2-P ( ( 0.7 ( ( GV2-P ( ( GV2-P ( ( 0.55 ( ( GV2-P ( ( 0.7 ( ( GV2-P ( ( 0.55 ( ( 0.75 ( ( GV2-P ( ( 1.1 ( ( GV2-P ( ( 1.1 ( ( GV2-P ( ( 1.5 ( ( GV2-P ( ( 2.2 ( ( GV2-P ( ( ( ( GV2-P ( ( GV2-P ( ( GV2-P ( ( GV2-P GV2-P GV2-P GV2-P GV2-P GV2-P Thermal magnetic circuit-breakers GV2-ME with built-in auxiliary contact block pages /24 to /9 Schneider Electric With instantaneous auxiliary contact block (composition, see page /15): - GV-AE1, add suffix AE1TQ to the motor circuit-breaker reference selected above. Example: GV2-ME01AE1TQ. - GV-AE11, add suffix AE11TQ to the motor circuit-breaker reference selected above. Example: GV2-ME01AE11TQ. - GV-AN11, add suffix AN11TQ to the motor circuit-breaker reference selected above. Example: GV2-ME01AN11TQ. These circuit-breakers with built-in contact block are sold in lots of 20 units in a single pack. (1) For purchase in bulk packs of GV2-ME, see page i/7. (2) As % of Icu. () For use of GV2-ME in an enclosure, see pages 5/46 and 5/47. (4) Maximum rating which can be mounted in enclosures GV2-MC or MP, please call our Customer information centre on ( > 100 ka. pages /64 to /66 page /70 /7

3 Thermal-magnetic motor circuit-breakers type GV2-ME Thermal magnetic circuit-breakers GV2-ME with spring terminal connections (1) Pushbutton control Standard power ratings Setting Magnetic Reference Weight of -phase motors range of tripping 50/60 Hz in category AC- thermal current 400/415 V 500 V trips Id ± 20 % P Icu Ics (2) P Icu Ics (2) kw ka kw ka A A GV2-ME GV2-ME// 0.06 ( ( GV2-ME ( ( GV2-ME ( ( GV2-ME ( ( 0.25 ( ( 0.7 ( ( GV2-ME ( ( 0.7 ( ( 0.7 ( ( GV2-ME ( ( 0.55 ( ( 0.75 ( ( 0.75 ( ( 1.1 ( ( GV2-ME ( ( 1.5 ( ( GV2-ME ( ( 2.2 ( ( 2.2 ( ( GV2-ME ( ( GV2-ME ( ( GV2-ME GV2-ME GV2-ME GV2-ME Contact blocks Description Mounting Max. Type of contacts Sold in Unit Weight number lots of reference Instantaneous Front 1 N/O + N/C 10 GV-AE auxiliary N/O + N/O 10 GV-AE contacts LH 2 N/O + N/C 1 GV-AN side N/O + N/O 1 GV-AN Accessory Description Application Sold in Unit Weight lots of reference LA9-D99 Cable end For connection of 20 LA9-D99 reducer () conductors from 1 to 1.5 mm 2 (1) For connection of conductors from 1 to 1.5 mm 2 the use of a cable end reducer LA9-D99 is recommended. (2) As % of Icu. ( > 100 ka () 2 supplied with each circuit-breaker as standard. pages /24 to /9 pages /64 to /66 page /70 /8 Schneider Electric

4 Thermal-magnetic motor circuit-breakers type GV-ME Thermal magnetic circuit-breakers GV-ME with screw clamp terminals Pushbutton control Standard power ratings of -phase Setting range Reference Weight motors 50/60 Hz in category AC- of thermal 400/415 V 500 V 660/690 V trips P Icu Ics (1) P Icu Ics (1) P Icu Ics (1) kw ka kw ka kw ka A GV-ME GV-ME GV-ME GV-ME GV-ME GV-ME GV-ME GV-ME GV-ME40 (2) GV-ME6 (2) GV-ME80 (2) (1) As % of Icu. (2) Recommended for use in association with a contactor. pages /24 to /9 page /67 page /71 Schneider Electric /9

5 Thermal-magnetic motor circuit-breakers type GV7-R Thermal magnetic circuit-breakers GV7-R with screw clamp terminals Control by rocker lever Standard power ratings of -phase Setting range Reference Weight motors 50/60 Hz in category AC- of thermal 400/415 V 500 V 660/690 V trips P Icu Ics(1)P Icu Ics(1)P Icu Ics (1) kw ka kw ka kw ka A GV7-RE GV7-RE GV7-RS GV7-RE GV7-RS GV7-RE GV7-RS GV7-RS GV7-RE GV7-RS GV7-RE GV7-RS GV7-RE GV7-RS GV7-RE GV7-RS GV7-RE GV7-RS (1) As % of Icu. pages /24 to /9 page /67 page /71 /10 Schneider Electric

6 Thermal magnetic circuit-breakers type GV2-RT For motors with high current peak on starting GV2-RT Control by rocker lever Standard power ratings Setting Magnetic Reference Weight of -phase motors range of tripping 50/60 Hz in category AC- thermal current trips Id ± 20 % 20 V 415 V 440 V 500 V 690 V kw kw kw kw kw A A GV2-RT GV2-RT GV2-RT GV2-RT GV2-RT GV2-RT GV2-RT GV2-RT GV2-RT GV2-RT GV2-RT For primaries of -phase transformers Control by rocker lever Standard power ratings Setting range Magnetic Reference Weight of thermal tripping current 240 V 415 V 440 V 500 V 690 V trips Id ± 20 % kva kva kva kva kva A A GV2-RT GV2-RT GV2-RT GV2-RT GV2-RT GV2-RT GV2-RT GV2-RT GV2-RT GV2-RT Accessory (1) Description Reference Weight Padlockable external operator (IP 54), GV2-AP black handle, blue legend plate (1) Other accessories such as mounting, cabling and marking accessories are identical to those used for GV2-ME motor circuit-breakers, see page /21. pages /24 to /9 page /66 page /70 Schneider Electric /11

7 Magnetic motor circuit-breakers types GV2-LE and GV2-L Magnetic circuit breakers GV2-LE and GV2-L with screw clamp terminals GV2-LE GV2-L GV2-LE: rocker lever, GV2-L: rotary handle Standard power ratings Magnetic Trip- Use in Reference Weight of -phase motors protection ping association 50/60 Hz in category AC- rating current with 400/415 V 500 V 690 V Id ± 20 % thermal P Icu Ics P Icu Ics P Icu Ics overload (1) (1) (1) relay kw ka kw ka kw ka A A 0.06 ( ( LR2-K002 GV2-LE ( ( LR2-K004 GV2-LE0 0.0 or LRD-0 GV2-L ( ( 0.7 ( ( LR2-K004 GV2-LE or LRD-04 GV2-L ( ( LR2-K005 GV2-LE or LRD-04 GV2-L ( ( 1 1 LR2-K005 GV2-LE or LRD-05 GV2-L ( ( 1 1 LR2-K006 GV2-LE or LRD-05 GV2-L ( ( 1 1 LR2-K006 GV2-LE or LRD-06 GV2-L ( ( 0.7 ( ( 1 1 LR2-K006 GV2-LE or LRD-05 GV2-L ( ( 0.55 ( ( 1.1 ( ( LR2-K007 GV2-LE ( ( 0.55 LRD-06 GV2-L ( ( LR2-K007 GV2-LE or LRD-06 GV2-L ( ( 1.1 ( ( LR2-K008 GV2-LE ( ( 1.1 ( ( LRD-07 GV2-L ( ( LR2-K008 GV2-LE or LRD-08 GV2-L ( ( 1.5 ( ( LR2-K010 GV2-LE ( ( 1.5 ( ( LRD-08 GV2-L ( ( 4 51 LR2-K012 GV2-LE or LRD-08 GV2-L ( ( LR2-K012 GV2-LE ( ( ( ( LRD-10 GV2-L ( ( LR2-K014 GV2-LE ( ( LRD-12 GV2-L ( ( LR2-K016 GV2-LE or LRD-14 GV2-L LRD-14 GV2-LE LRD-14 GV2-L LRD-16 GV2-LE LRD-16 GV2-L LR2-K021 GV2-LE LRD-16 GV2-L LRD-21 GV2-LE LRD-21 GV2-L LRD-22 GV2-LE LRD-22 GV2-L LRD-22 GV2-LE LRD-22 GV2-L LRD-2 GV2-LE LRD-2 GV2-L2 0.0 (1) As % of Icu. ( > 100 ka. pages /0 to /9 pages /72 to /74 page /75 /12 Schneider Electric

8 Magnetic motor circuit-breakers type GK Magnetic circuit breakers GK with screw clamp terminals Rotary handle Standard power ratings Associated equipment Circuit-breakers of -phase motors Contactor Thermal Short-circuit 50/60 Hz in category AC- minimum overload protection size relay 400/415 V 500 V 690 V P Icu Ics P Icu Ics P Icu Ics Reference Reference Rat- Reference Weight (1) (1) (1) LC1- LRD- ing (1) kw ka kw ka kw ka A D GK-EF GK-EF D GK-EF D GK-EF D GK-EF D GK-EF D GK-EF D GK-EF D GK-EF D GK-EF D GK-EF (1) Associated current limiter or fuses, where required. See characteristics page /. pages /0 to /9 page /74 page /75 Schneider Electric /1

9 GV2-AK00 GV1-L GV-AX GV2-ME GV-AD GV-AM11 GV-AU GV2-P GV-AM11 GV-AS GV2-L GV-AE11, AE20 GV-AN GV-AN GV-AE1 GV2-LE GV-AE1 G SS Q /14 Schneider Electric

10 Thermal-magnetic and magnetic motor circuit-breakers type GV2 with screw clamp terminals Accessories Contact blocks with screw clamp terminals Description Mounting Maximum Type of contacts Sold in Unit Weight number lots of reference Instantaneous Front (1) 1 N/O or N/C (2) 10 GV-AE auxiliary N/O + N/C 10 GV-AE contacts N/O + N/O 10 GV-AE Side 2 N/O + N/C 1 GV-AN (LH) N/O + N/O 1 GV-AN Fault signalling Side () 1 N/O + N/O 1 GV-AD contact + (LH) (fault) + N/C 1 GV-AD instantaneous N/C + N/O 1 GV-AD auxiliary contact (fault) + N/C 1 GV-AD Short-circuit signalling Side 1 C/O 1 GV-AM contact (LH) common point Electric trips with screw clamp terminals Mounting Voltage Reference Weight Undervoltage or shunt trips (4) Side 24 V 50 Hz GV-A/ (1 block on RH side 60 Hz GV-A/ of circuit-breaker) 48 V 50 Hz GV-A/ Hz GV-A/ V 50 Hz GV-A/ V 60 Hz GV-A/ V 50 Hz GV-A/ Hz GV-A/ V 50 Hz GV-A/ V 60 Hz GV-A/ V 50 Hz GV-A/ V 220 V 60 Hz GV-A/ V 240 V 50 Hz GV-A/ Hz GV-A/ V 400 V 50 Hz GV-A/ Hz GV-A/ V 440 V 50 Hz GV-A/ V 60 Hz GV-A/ V 60 Hz GV-A/ V 60 Hz GV-A/ V 50 Hz GV-A/ V 60 Hz GV-A/ Undervoltage trip, INRS (can only be mounted on GV2-ME) Safety device for dangerous machines, conforming to INRS and VDE 011 Side V 50 Hz GV-AX (1 block on RH side 60 Hz GV-AX of circuit-breaker 127 V 60 Hz GV-AX GV2-ME) V 50 Hz GV-AX Hz GV-AX V 50 Hz GV-AX Hz GV-AX V 50 Hz GV-AX V 60 Hz GV-AX Add-on contact blocks with screw clamp terminals Description Mounting Maximum Reference Weight number LA9-LB920 pages /4, /8 & /9 Schneider Electric Visible isolation Front (1) 1 GV2-AK block (5) Limiters At top 1 GV1-L 0.10 (GV2-ME and GV2-P) Independent 1 LA9-LB (1) Mounting of a GV-AE contact block or a GV2-AK00 visible isolation block on GV2-P and GV2-L. (2) Choice of N/C or N/O contact operation, depending on which way round the reversible block is mounted. () The GV-AD is always mounted next to the circuit-breaker. (4) To order an undervoltage trip: replace the dot (/) in the reference with a U, example: GV-AU025. To order a shunt trip: replace the dot (/) in the reference with an S, example: GV-AS025. (5) Visible isolation of the poles upstream of circuit-breaker GV2-P and GV2-L. Dimensions and schemes: pages /64 to /75 /15

11 GV-A01...A07 GV-A08 GV-A09 /16 Schneider Electric

12 Motor circuit-breakers: thermal-magnetic type GV-ME and magnetic type GK with screw clamp terminals Accessories For thermal-magnetic circuit-breakers GV-ME Contact blocks Description Type of standard Reference Weight early break contacts Instantaneous auxiliary N/C + N/O GV-A contact blocks (1 per circuit-breaker) N/O + N/O GV-A N/C + N/O + N/O GV-A N/O + N/O + N/O GV-A N/O + N/O + 2 volt-free terminals GV-A N/C + N/O + 2 volt-free terminals GV-A Fault signalling N/C GV-A contacts (1) N/O GV-A Electric trips Description Voltages Reference Weight 50 Hz 60 Hz Undervoltage trips (1) 110, 120, 127 V 120, 127 V GV-B , 240 V 240, 277 V GV-B , 415 V 480 V GV-B Shunt trips (1) 110, 120, 127 V 120, 127 V GV-D , 240 V 240, 277 V GV-D , 415 V 480 V GV-D Accessory Description Sold in Unit Weight lots of reference Padlocking device, for locking 5 GV1-V the start button (on open-mounted product) For magnetic circuit-breakers GK Contact blocks Description Composition Reference Weight Auxiliary contact blocks for On-Off signalling and N/O GK2-AX control circuit test function (1 or 2 blocks per device) N/O + N/O GK2-AX mounted on RH side of GK-EF N/C + N/O GK2-AX Instantaneous fault signalling contact blocks N/O GK2-AX (1 or 2 blocks per device) N/O + N/O GK2-AX mounted on LH side of GK-EF N/C + N/O GK2-AX Accessories Description Reference Weight Padlocking device GK-AV for padlocking the operator, using up to padlocks (padlocks to be ordered separately) External operator GK-AP for mounting on the enclosure door. Red Ø 40 pushbutton on yellow plate. Can be locked in position O by means of up to padlocks, with door locked in position I and door locked in position O when padlocked. (1) 1 voltage trip OR 1 fault signalling contact to be fitted inside the motor circuit-breaker. pages /5 and /8 Other versions Dimensions and schemes: pages /64 to /75 24 to 690 V 50 or 60 Hz voltage trips for circuit-breakers GV-ME. Please call our Customer information centre on Schneider Electric /17

13 1 2 4 GV7-AE11, AB11 GV7-RE, RS GV7-AU, AS /18 Schneider Electric

14 Thermal-magnetic motor circuit-breakers type GV7-R with screw clamp terminals Accessories Add-on auxiliary contact blocks They allow remote indication of the circuit-breaker contact states. They can be used for signalling, electrical locking, relaying, etc. Two versions are available: standard and low level. They include a terminal block and the auxiliary circuits leave the circuit-breaker through a hole provided for this purpose. They perform the following functions, depending on where they are located in the circuit-breaker: Location Function Application 1 and/or 4 C/O contact Indicates the position of the circuit-breaker poles 2 Trip indication Indicates that the circuit-breaker has tripped due to an overload, a short-circuit, a differential faul or the operation of a voltage trip (undervoltage or shunt trip or of the push to trip test button. It resets when the circuit-break is reset. Electrical fault Indicates that the circuit-breaker has tripped due to an overload, a short-circuit or indication a differential fault. It resets when the circuit-breaker is reset. Type Reference Weight Standard GV7-AE Low level GV7-AB Fault discrimination devices They make it possible to: - either differentiate a thermal fault from a magnetic fault, - or open the contactor only in the event of a thermal fault. Voltage Reference Weight " and $ V GV7-AD111 (1) V GV7-AD112 (1) Electric trips These allow the circuit-breaker to be tripped via an electrical control signal. / Undervoltage trip GV7-AU - Trips the circuit-breaker when the control voltage drops below the tripping threshold, which is between 0.5 and 0.7 times the rated voltage. - Circuit-breaker closing is only possible if the voltage exceeds 0.85 times the rated voltage. Circuit-breaker tripping by a GV7-AU trip meets the requirements of IEC / Shunt trip GV7-AS Trips the circuit-breaker when the control voltage rises above 0.7 times the rated voltage. / Operation (GV7-AU or GV7-AS) - When the circuit-breaker has been tripped by a GV7-AU or AS, it must be reset either locally or by remote control. (For remote control, please call our Customer information centre on ). - Tripping has priority over manual closing: if a tripping instruction is present, manual action does not result in closing, even temporarily, of the contacts. - Durability: 50 % of the mechanical life of the circuit-breaker. Type Voltage Reference Weight Undervoltage 48 V, 50/60 Hz GV7-AU055 (1) trip V, 50/60 Hz GV7-AU107 (1) V, 50/60 Hz GV7-AU207 (1) V, 50/60 Hz GV7-AU87 (1) V, 50 Hz GV7-AU525 (1) pages /4 to /9 Schneider Electric Shunt 48 V, 50/60 Hz GV7-AS055 (1) trip V, 50/60 Hz GV7-AS107 (1) V, 50/60 Hz GV7-AS207 (1) V, 50/60 Hz GV7-AS87 (1) V, 50 Hz GV7-AS525 (1) (1) For mounting of a GV7-AD or a GV7-AU or AS. pages /67 to /69 page /71 /19

15 GV2-G454 GV2-G254 LAD-1 GV1-G09 GV2-G454 LAD-1 GV2-G254 GV1-G10 GV2-G05 LA9-E07 GV2-AF GV2-AF01 GV2-AF4 GK2-AF01 GV2-GA01 GV2-AF02 GV1-G02 GV2-AP0 2 TRIP. RESET GV2-V0 O /20 Schneider Electric

16 Thermal-magnetic and magnetic motor circuit-breakers type GV2 with screw clamp terminals Accessories Accessories Description Application Sold in Unit Weight lots of reference Adapter plate For mounting a GV2-ME 10 GV2-AF or GV2-LE by screw fixing For mounting a GV2-ME or 10 LAD GV2-P and contactor LC1-D09 to D8 with front faces aligned Height compensation plate 7.5 mm 10 GV1-F Combination block Between GV2 and contactor 10 GV2-AF LC1-K or LP1-K Between GV2 and contactor 10 GV2-AF LC1-D09 D8 Between GV2 mounted 10 GV2-AF on LAD-1 and contactor LC1-D09 D8 Motor starter With -pole connection 1 GK2-AF adapter plate for mounting a GV2 and an LC1-D09 to D25 contactor Description Application Pitch Reference Weight mm Sets of -pole 2 tap-offs 45 GV2-G A busbars 54 GV2-G GV2-G tap-offs 45 GV2-G GV2-G tap-offs 45 GV2-G GV2-G GV2-G tap-offs 54 GV2-G Description Application Sold in Unit Weight lots of reference Protective end cover (1) For unused busbar outlets 5 GV1-G Terminal blocks for Connection from the top 1 GV1-G supply to one or more Can be fitted with current limiter 1 GV2-G GV2-G busbar sets GV1-L (GV2-ME and GV2-P) Cover for terminal block For mounting in 10 LA9-E modular panels Flexible -pole connection Centre distance between 10 GV1-G for connecting a GV2 mounting rails: mm to an LC1-D09 D25 contactor Set of connections For connecting GV2-ME 10 GV2-GA upstream/downstream to a printed circuit board Clip-in marker holders For GV2-P, GV2-L, GV2-LE 100 LA9-D92 (1) (supplied with each and GV2-RT (8 x 22 mm) circuit-breaker) Padlockable external operator Description Reference Weight pages /64 to /74 Schneider Electric For GV2-P and GV2-L Padlocking in On and Off position GV2-AP (150 to 290 mm) Black handle, blue legend plate, IP 54 Padlocking in Off position GV2-AP Red handle, yellow legend plate, IP 54 For GV2-LE Padlocking in On and Off position GV2-AP Black handle, blue legend plate, IP 54 Padlocking device For all GV2 devices For use with up to 6 padlocks (not supplied), GV2-V Ø 6 mm shank max. (1) Check with requirements of local Isolation standards before use. /21

17 ON ON O OFF GV7AP04 O OFF ON GV7AP01, AP02 GV7RE, RS O OFF ON GV7AP0 ON O OFF ON O OFF GV7AP05 O OFF GV7AC04 GV7AC01 GV7V01 GV7RE, RS GV7-AC04 GV7AC0 GV7AC01 /22 Schneider Electric

18 Thermal-magnetic motor circuit-breakers type GV7-R with screw clamp terminals Accessories Cabling accessories Description Application For Sold Unit Weight contactor in reference lots of Clip-on Up to 150 A, mm 2 GV7-AC connectors for GV7-R Up to 220 A, mm 2 GV7-AC pole To increase the 1 GV7-AC spreader (1) pitch to 45 mm Terminal shields Supplied with the 1 GV7-AC IP 405 (1) sealing accessory Phase Safety accessories used 2 GV7-AC barriers when fitting of shields is impossible Insulating screens Ensure insulation between 2 GV7-AC the connections and the backplate Kit for combination Allowing link between the LC1-F115 1 GV7-AC with contactor circuit-breaker and the to F185 (2) contactor. The cover provides protection against LC1F225 1 GV7-AC direct finger contact. and F265 Direct rotary handle LC1-D115 1 GV7-AC and D150 Replaces the circuit-breaker front cover; secured by screws. It includes a device for locking the circuit-breaker in the O (Off) position by means of up to padlocks with a shank diameter of 5 to 8 mm (padlocks not supplied). A conversion accessory allows the direct rotary handle to be mounted on the enclosure door. In this case, the door cannot be opened if the circuit-breaker is in the tripped position. Circuit-breaker closing is inhibited if the enclosure door is open Description Type Degree of Reference Weight protection Direct Black handle, black legend plate IP 40 GV7-AP rotary handle Red handle, yellow legend plate IP 40 GV7-AP Conversion For mounting direct rotary IP 4 GV7-AP accessory () handle on enclosure door Extended rotary handle Allows a circuit-breaker installed in the back of an enclosure to be operated from the front of the enclosure. It comprises: - a unit which screws onto the front cover of the circuit-breaker, - an assembly (handle and front plate) to be fitted on the enclosure door, - an extension shaft which must be adjusted (distance between the mounting surface and the door: 185 mm minimum, 600 mm maximum). It includes a device for locking the circuit-breaker in the O (Off) position by means of up to padlocks with shank diameter of 5 to 8 mm (padlocks not supplied). This prevents the enclosure door from being opened. Description Type Degree of Reference Weight protection Extended Black handle, black legend plate IP 55 GV7-AP rotary handle Red handle, yellow legend plate IP 55 GV7-AP Locking device Allows circuit-breakers not fitted with a rotary handle to be locked in the O (Off) position by means of up to padlocks with a shank diameter of 5 to 8 mm (padlocks not supplied). Description Application Reference Weight Locking device For circuit-breaker not fitted GV7-V with a rotary handle (1) Terminal shields cannot be used together with spreaders. (2) Le kit comprises links, a protective shield and a depth adjustable metal bracket for the breaker. () This conversion accessory makes it impossible to open the door if the device is closed and prevents the device from being closed if the door is open. pages /4 to /9 pages /67 to /69 page /71 Schneider Electric /2