Rotary Disconnect Switch Specifications

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Rotary Disconnect Switch Specifications"

Transcription

1 Technical Data Rotary Disconnect Switch Specifications Bulletin Number 194R Topic Page Product Line Overview 2 General Specifications Fuse Description 12 Approximate Dimensions 14 Additional Resources These documents contain additional information concerning related products from Rockwell Automation. Resource Industrial Automation Wiring and Grounding Guidelines, publication Product Certifications website, Description Provides general guidelines for installing a Rockwell Automation industrial system. Provides declarations of conformity, certificates, and other certification details. You can view or download publications at To order paper copies of technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative.

2 194R Rotary Disconnect Switches Product Overview Bulletin 194R Overview Bulletin 194R-C, J, H, B, D, F, L, N, NU Bulletin 194R-NE Product Type Fused and non-fused rotary disconnect switches Non-fused IEC rotary disconnect switches Current Range 10 A A Main Applications Functionality UL 98 ratings "suitable as service entrance disconnecting means" UL 508, CSA ratings "suitable as at-motor disconnect" - or 4-pole fusible or non-fusible disconenct for standard OFF-ON or emergency stop in a main panel disconnect application 4th pole available as modular accessory Test mode switch position Disconnecting means - or 4-pole non-fusible disconenct for standard OFF-ON or emergency stop in a main panel disconnect application 4th pole available as modular accessory Test mode switch position Mounting Styles Base/DIN Rail mounting Base/DIN Rail mounting Handles Available in rotary styles, UL Type 1/R/4/4X/12, IP66, standard, or test mode versions Handle colors in black and red/yellow and padlockable versions 0 A/60 A legend markers (optional) uses Cat. No MS6X12 markers Available in rotary styles, UL Type 1/R/4/4X/12, IP66, standard, or test mode versions Handle colors in black and red/yellow and padlockable versions Open Switch or Enclosed Open switch Enclosed: UL/CSA rated enclosure Open switch UL/CSA Electrical Ratings: Rated Voltage U e 690V AC 690V AC Rated Current I e 10 A A Rated Power P e [FLA] Varies w/ 1- or -phase switch, voltage Varies w/ 1- or -phase switch, voltage Short-Circuit Ratings 0 ka 0 ka Mechanical Life [ops] IEC Rated Current I e AC V V AC-21A Varies w/ 1- or -phase switch, voltage Varies w/ 1- or -phase switch, voltage AC-22A Varies w/ 1- or -phase switch, voltage Varies w/ 1- or -phase switch, voltage Ambient Operational Temp C ( F) C ( F) Ambient Enclosed Temp C ( F) C ( F) Ambient Storage Temp C ( F) C ( F) Protection class per IEC 529 Optional Accessories Standards/Certifications Switch bodies: IP2 Fuse carriers: IP0 Operator handles Multi-length shafts Auxiliary contacts Terminal covers NFPA 79 internal handle with shaft UL 98, UL 508 CSA C22.2, No. 14 IEC Low Voltage Switchgear and Controlgear part CE Switch bodies: IP2 IP66 handles Multi-length shafts Auxiliary contacts Terminal covers NFPA 79 internal handle CSA C22.2, No. 14 IEC Low Voltage Switchgear and Controlgear part CE Product Selection Page 4 Page 4 2

3 Specifications 194R Rotary Disconnect Switches Specifications Fused Disconnect Switches for UL Class Fuses and CSA HRCI-J Electrical Ratings Cat. No. 194R-C R-J R-J CSA Fuse Type/UL Fuse Type Class CC/HRCI-MISC Class J/HRCI-J Class J/HRCI-J Maximum Fuse Cartridge Size Maximum Voltage AC DC [V] [V] Ampere Rating Maximum Short Circuit Prospective Fault Current [ka] Fuse Operating Characteristics Maximum Hp, -Phase AC 0V, 60 Hz 240V, 60 Hz 480V, 60 Hz V, 60 Hz Maximum Hp, 1-Phase AC 1V, 60 Hz 240V, 60 Hz Maximum Hp, DC 125V DC V DC Time Delay Non-Time Delay Time Delay Non-Time Delay Based on Rockwell Automation tests in accordance with the requirements as defined in CSA C22.2 No. 4, IEC and UL Time Delay Non-Time Delay Electrical Ratings Cat. No. 194R-J R-J R-J R-J R-J CSA Fuse Type/UL Fuse Type Class J/HRCI-J Class J/HRCI-J Class J/HRCI-J Class J/HRCI-J Class J/HRCI-J Maximum Fuse Cartridge Size Maximum Voltage AC DC [V] [V] Ampere Rating Maximum Short Circuit Prospective Fault Current [ka] poles in series 800 Mechanical Data Cat. No. 194R-C0-175, 194R-J R-J Degree of Protection (per IEC ) Switch Only Switch with Terminal Shield & Fuse Carriers Mechanical Endurance Operations Operating Torque (Maximum) Terminal Capacity Power Terminals Auxiliary Contact Terminals N m lb in mm 2 AWG mm 2 AWG #14 #8 Maximum Number of Auxiliary Circuits 6 6 Approximate Weight Minimum Enclosure Size Approximate dimensions in millimeters (inches) Switch Dimension Reference (See dimension drawings.) kg lbs Height Width Depth (9-/4) 171 (6-/4) 148 (5-1/16) Based on Rockwell Automation tests in accordance with the requirements as defined in CSA C22.2 No. 4, IEC and UL 98. A #14 # (9-/4) 197 (7-/4) 148 (5-1/16) B1 Rockwell Automation Publication 194R-TD001A-EN-P

4 194R Rotary Disconnect Switches Specifications Degree of Protection (per IEC ) Switch Only Switch with Terminal Shield & Fuse Carriers Mechanical Data Cat. No. 194R-J R-J R-J R-J R-J Mechanical Endurance Operations Operating Torque (Maximum) N m lb in Terminal Capacity Power Terminals Auxiliary Contact Terminals mm 2 AWG #1 mm 2 AWG 00 MCM #6 MCM; 2 x 00 MCM #2 or 2 x #6 2 x MCM 2 x #2 Maximum Number of Auxiliary Circuits Approximate Weight Minimum Enclosure Size Approximate dimensions in millimeters (inches) Switch Dimension Reference (See dimension drawings.) kg lbs Height Width Depth x MCM 2 x #2 F5 F6 F7 F8 F8 Based on Rockwell Automation tests in accordance with the requirements as defined in CSA C22.2 No. 4, IEC and UL Non-Fused Disconnect Switches for CSA and UL Class Applications Maximum Voltage Electrical Ratings Cat. No. 194R-N R-N AC DC [V] [V] 194R-NU , 194R-NU R-NU0-175, 194R-NU Ampere Rating 0Δ 60Δ Maximum Short Circuit Prospective Fault Current [ka] Maximum Hp, - Phase AC Maximum Hp, 1- Phase AC Maximum Hp, DC 0V, 60 Hz 240V, 60 Hz 480V, 60 Hz V, 60 Hz 1V, 60 Hz 240V, 60 Hz 125V DC V DC Power Lost [W] 2 6 Non-fused disconnect switches must be used with separately installed fuses. Maximum Voltage Cat. No. AC DC [V] [V] 194R-NU , 194R-NU Electrical Ratings 194R-NU-175, 194R-NU R-NU , 194R-NU R-NU10-175, 194R-NU Ampere Rating Fuse Type J J L L Maximum Short Circuit Prospective Fault Current [ka] Non-fused disconnect switches must be used with separately installed fuses. 4 Rockwell Automation Publication 194R-TD001A-EN-P

5 Specifications 194R Rotary Disconnect Switches Degree of Protection (per IEC ) Switch Only Switch with Terminal Shield & Fuse Carriers Mechanical Data Cat. No. 194R-N R-N R-NU , 194R-NU R-NU0-175, 194R-NU Mechanical Endurance Operations Operating Torque (Maximum) Terminal Capacity Power Terminals Auxiliary Contact Terminals N m lb in mm 2 AWG mm 2 AWG #14 # #14 # #14 # #14 # MCM # MCM #6 Maximum Number of Auxiliary Circuits Approximate Weight Minimum Enclosure Size Approximate dimensions in millimeters (inches) Switch Dimension Reference (See dimension drawings) kg lbs Height Width Depth (9-/4) 171 (6-/4) 111 (4-/8) Non-fused disconnect switches must be used with separately installed fuses (9-/4) 197 (7-/4) 111 (4-/8) 1.67/2.1.7/ /2.1.7/4. A2 B2 F1 F1 Mechanical Data Cat. No. 194R-NU , 194R-NU R-NU-175, 194R-NU R-NU , 194R-NU R-NU10-175, 194R-NU Degree of Protection (per IEC ) Switch Only Switch with Terminal Shield & Fuse Carriers Mechanical Endurance Operations Operating Torque (Maximum) Terminal Capacity Power Terminals Auxiliary Contact Terminals N m lb in mm 2 AWG mm 2 AWG MCM # x MCM 2 x # x MCM 4 x # x MCM 4 x #2 Maximum Number of Auxiliary Circuits Approximate Weight Minimum Enclosure Size Approximate dimensions in millimeters (inches) Switch Dimension Reference (See dimension drawings) kg lbs Height Width Depth /.8 6.6/8.4 Non-fused disconnect switches must be used with separately installed fuses. 8.2/ / / /2 11.6/ /2 F2 F F4 F4 Non-Fused Disconnect Switches for IEC Applications Maximum Voltage Electrical Ratings Cat. No. 194R-N R-N AC DC [V] [V] 194R-NE , 194R-NE R-NE , 194R-NE Ampere Rating Maximum Short Circuit Prospective Fault Current [ka] Maximum Hp, - Phase AC Maximum Hp, 1- Phase AC Maximum Hp, DC 0V, 60 Hz 240V, 60 Hz 480V, 60 Hz V, 60 Hz 1V, 60 Hz 240V, 60 Hz 125V DC V DC Power Lost [W] 2 6 Non-fused disconnect switches must be used with separately installed fuses. Rockwell Automation Publication 194R-TD001A-EN-P 5

6 194R Rotary Disconnect Switches Specifications Maximum Voltage Cat. No. AC DC [V] [V] 194R-NE , 194R-NE Electrical Ratings 194R-NE60-175, 194R-NE R-NE , 194R-NE R-NE1-175, 194R-NE Ampere Rating Maximum Short Circuit Prospective Fault Current [ka] Non-fused disconnect switches must be used with separately installed fuses. All Bulletin 194R Disconnect Switch Cat. Nos., 6 A Range Environmental Data Ambient Temperature Open... C ( F) (-4 +11) Enclosed... C ( F) ( ) Storage... C ( F) ( ) Altitude (per IEC ) 2,000 + C (+68 F) Relative Humidity (per IEC ) +40 C (+104 F) Fused Disconnect Switches For CSA HRCII-C Fuses Electrical Ratings Cat. No. 194R-H R-H CSA Fuse Type HRCII-C HRCII-C Maximum Fuse Cartridge Size 0 60 Maximum Voltage AC [V] Ampere Rating 0 60 Maximum Short Circuit Prospective Fault Current [ka] 0 0 Maximum Hp, -Phase AC Maximum Hp, 1-Phase AC 0V, 60 Hz 240V, 60 Hz 480V, 60 Hz V, 60 Hz 1V, 60 Hz 240V, 60 Hz Degree of Protection (per IEC ) Switch Only Switch with Terminal Shield & Fuse Carriers Mechanical Data Cat. No. 194R-H R-H Mechanical Endurance Operations Operating Torque (Maximum) Terminal Capacity Power Terminals Auxiliary Contact Terminals N m lb in mm 2 AWG mm 2 AWG IP IP #14 #8 Maximum Number of Auxiliary Circuits 6 6 Approximate Weight Minimum Enclosure Size Approximate dimensions in millimeters (inches) Switch Dimension Reference (See dimension drawings.) kg lbs Height Width Depth (9-/4) 171 (6-/4) 148 (5-1/16) Based on Rockwell Automation tests in accordance with the requirements as defined in CSA C22.2 No. 4 and IEC B1 IP IP #14 # (9-/4) 197 (7-/4) 148 (5-1/16) B1 6 Rockwell Automation Publication 194R-TD001A-EN-P

7 Specifications 194R Rotary Disconnect Switches Fused Disconnect Switches For BS88 Fuses Fuse classes BS88, DIN, and NFC are not suitable for use in North American applications Cat. No. 194R-B-175 Electrical Ratings 194R-B R-B6-175 Fuse Type BS88 Dimension A1 A2 A2, A 194R-B R-B Rated Insulation Voltage (U i ) [V] Rated Conditional Short-Circuit [ka] Current (r.m.s.) at 4V Rated Operational Current AC-22A (I e ) Fuse Links Shorting Links Fuse Links Fuse Links Shorting Links 0/20V 50 Hz 80/400/4V 50 Hz 500V 50 Hz 660/690V 50 Hz Rated Operational Current AC-2A (I e ) 0/20V 50 Hz 80/400/4V 50 Hz 500V 50 Hz 660/690V 50 Hz Rated Thermal Current (l the ) Maximum kw, AC-2A -Phase 0/20V 50 Hz 80/400/4V 50 Hz 500V 50 Hz 660/690V 50 Hz [kw] [kw] [kw] [kw] Maximum Fuse Rating Maximum Motor Circuit Fuse Link M2 2M6 6M100 Maximum Fuse Cut-off Current [ka] Rated Short Time Current, 1 Second [ka] Fuses must be selected with regard to the maximum prospective fault current of the system and the maximum cut-off current of the fuse when subjected to that maximum fault current. The maximum fuse cut-off current as specified for each disconnect switch must not be exceeded. Electrical Ratings Cat. No. 194R-B R-B R-B R-B R-B R-B1-175 Fuse Type BS88 Dimension Rated Insulation Voltage (U i ) [V] Rated Conditional Short-Circuit Current (r.m.s.) at 4V [ka] Rated Operational Current AC-22A (I e ) 0/20V 50 Hz 80/400/4V 50 Hz 500V 50 Hz 660/690V 50 Hz Rated Operational Current AC-2A (I e ) 0/20V 50 Hz 80/400/4V 50 Hz 500V 50 Hz 660/690V 50 Hz Rated Thermal Current (l the ) Maximum kw, AC-2A -Phase 0/20V 50 Hz 80/400/4V 50 Hz 500V 50 Hz 660/690V 50 Hz [kw] [kw] [kw] [kw] Maximum Fuse Rating Maximum Motor Circuit Fuse Link Maximum Fuse Cut-off Current [ka] Rated Short Time Current, 1 Second [ka] Fuses must be selected with regard to the maximum prospective fault current of the system and the maximum cut-off current of the fuse when subjected to that maximum fault current. The maximum fuse cut-off current as specified for each disconnect switch must not be exceeded Rockwell Automation Publication 194R-TD001A-EN-P 7

8 194R Rotary Disconnect Switches Specifications Mechanical Data Cat. No. 194R-B R-B R-B R-B R-B Degree of Protection (per IEC ) Switch Only Switch with Terminal Shield & Fuse Carriers Mechanical Endurance Operations Operating Torque (Maximum) Terminal Capacity Power Terminals Auxiliary Contact Terminals N m lb in mm 2 mm 2 AWG #14 # #14 # #14 #4 Maximum Number of Auxiliary Circuits Approximate Weight Minimum Enclosure Size Approximate dimensions in millimeters (inches) Switch Dimension Reference (See dimension drawings.) kg lbs Height Width Depth (9-/4) 171 (6-/4) 148 (5-1/16) (9-/4) 171 (6-/4) 148 (5-1/16) (9-/4) 197 (7-/4) 148 (5-1/16) A1 A1 B1 F1 F14 Based on Rockwell Automation tests in accordance with the requirements as defined in IEC Mechanical Data Cat. No. 194R-B R-B R-B R-B R-B R-B1-175 Degree of Protection (per IEC ) Switch Only Switch with Terminal Shield & Fuse Carriers Mechanical Endurance Operations Operating Torque (Maximum) Terminal Capacity Power Terminals Auxiliary Contact Terminals Maximum Number of Auxiliary Circuits Approximate Weight Minimum Enclosure Size Approximate dimensions in millimeters (inches) Switch Dimension Reference (See dimension drawings.) N m lb in mm mm 2 AWG kg lbs Height Width Depth F F F16 F17 F17 F18 Based on Rockwell Automation tests in accordance with the requirements as defined in IEC Fused Disconnect Switches For DIN Fuses Fuse classes BS88, DIN, and NFC are not suitable for use in North American applications 8 Rockwell Automation Publication 194R-TD001A-EN-P

9 Specifications 194R Rotary Disconnect Switches Electrical Ratings Cat No. 194R-D R-D R-D R-D Fuse Type DIN Dimension 00 0, 00 Rated Insulation Voltage (U i ) [V] Rated Conditional Short-Circuit Current (r.m.s.) at 4V [ka] Rated Operational Current AC-22A (I e ) Fuse Links Fuse Links 0/20V 50 Hz 80/400/4V 50 Hz 500V 50 Hz 660/690V 50 Hz Rated Operational Current AC-2A (I e ) 0/20V 50 Hz 80/400/4V 50 Hz 500V 50 Hz 660/690V 50 Hz Rated Thermal Current (l the ) Maximum kw, AC-2A -Phase 0/20V 50 Hz 80/400/4V 50 Hz 500V 50 Hz 660/690V 50 Hz [kw] [kw] [kw] [kw] Maximum Fuse Rating Maximum Motor Circuit Fuse Link Maximum Fuse Cut-off Current [ka] 14 Rated Short Time Current, 1 Second [ka] 1 1 Fuses must be selected with regard to the maximum prospective fault current of the system and the maximum cut-off current of the fuse when subjected to that maximum fault current. The maximum fuse cut-off current as specified for each disconnect switch must not be exceeded. Electrical Ratings Cat. No. 194R-D R-D R-D R-D R-D1-175 Fuse Type BS88 Dimension Rated Insulation Voltage (U i ) [V] Rated Conditional Short-Circuit Current (r.m.s.) at 4V [ka] Rated Operational Current AC-22A (I e ) 0/20V 50 Hz 80/400/4V 50 Hz 500V 50 Hz 660/690V 50 Hz Rated Operational Current AC-2A (I e ) 0/20V 50 Hz 80/400/4V 50 Hz 500V 50 Hz 660/690V 50 Hz Rated Thermal Current (l the ) Maximum kw, AC-2A -Phase 0/20V 50 Hz 80/400/4V 50 Hz 500V 50 Hz 660/690V 50 Hz [kw] [kw] [kw] [kw] 12 2 Maximum Fuse Rating Maximum Motor Circuit Fuse Link Maximum Fuse Cut-off Current [ka] Rated Short Time Current, 1 Second [ka] Fuses must be selected with regard to the maximum prospective fault current of the system and the maximum cut-off current of the fuse when subjected to that maximum fault current. The maximum fuse cut-off current as specified for each disconnect switch must not be exceeded Rockwell Automation Publication 194R-TD001A-EN-P 9

10 194R Rotary Disconnect Switches Specifications Degree of Protection (per IEC ) Switch Only Switch with Terminal Shield & Fuse Carriers Mechanical Data Cat. No. 194R-D R-D R-D R-D Mechanical Endurance Operations Operating Torque (Maximum) Terminal Capacity Power Terminals Auxiliary Contact Terminals N m lb in mm 2 AWG mm 2 AWG #14 # #14 # #14 #4 Maximum Number of Auxiliary Circuits Approximate Weight Minimum Enclosure Size Approximate dimensions in millimeters (inches) Switch Dimension Reference (See dimension drawings.) kg lbs Height Width Depth (9-/4) 197 (7-/4) 148 (5-1/16) (9-/4) 197 (7-/4) 148 (5-1/16) Based on Rockwell Automation tests in accordance with the requirements as defined in IEC #14 # B1 B1 F1 F1 Mechanical Data Cat. No. 194R-D R-D R-D R-D R-D1-175 Degree of Protection (per IEC ) Switch Only Switch with Terminal Shield & Fuse Carriers Mechanical Endurance Operations Operating Torque (Maximum) Terminal Capacity Power Terminals Auxiliary Contact Terminals N m lb in 40 mm mm 2 AWG 40 Maximum Number of Auxiliary Circuits Approximate Weight Minimum Enclosure Size Approximate dimensions in millimeters (inches) Switch Dimension Reference (See dimension drawings.) kg lbs Height Width Depth F F16 F17 F17 F18 Based on Rockwell Automation tests in accordance with the requirements as defined in IEC Rockwell Automation Publication 194R-TD001A-EN-P

11 Specifications 194R Rotary Disconnect Switches Wiring Schematic UL LISTED, CSA CERTIFIED DIMENSION REFERENCE CIRCUIT Cat. No. 194R-C R-J R-J R-H R-H A1 A1 B1 B1 B1 194R-N R-N A2 B2 IEC SWITCHES Cat. No. 194R-B R-B R-B R-D R-D R-F R-F R-F R- * DIMENSION REFERENCE A1 A1 B1 B1 B1 A1 A1 B1 (See -pole Dimension Reference) for Fused Switches CIRCUIT Rockwell Automation Publication 194R-TD001A-EN-P 11

12 194R Rotary Disconnect Switches Fuse Description DIN Fuses (100 A shown) Dimensions in millimeters only. Dimensions are not intended to be used for manufacturing purposes. IEC fuse type: Fuse-link with blade contacts Voltage rating: 660/690V AC Interrupting rating: 1,000 A Standard cartridge sizes: 00, 0, 1 and 2 Typical ampere ratings: A Construction: Blade type Can be installed on Bulletin 194R disconnect switch Cat. Nos: 194RND072P, ND18P, NDP, ND00P Where used: Europe, South America, Middle East and India Size Max. Rated Current a1 a2 a a4 b (min.) d e1 (max.) e2 (max.) e e4 ±0.2 f ± ± ±1.5 2 ± ± ± ± ± ± ± ± ± ± With Bulletin 194R Fused Disconnect Switches, Continued CSA HRCI and UL Class Fuses (10 A shown) Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. UL fuse type: Class CC CSA fuse type: HRCI-MISC Voltage rating: V AC Interrupting rating: A Standard cartridge sizes: 0 A Typical ampere ratings: 1 0 A Construction: Ferrule type Can be installed on Bulletin 194R disconnect switch Cat. No: 194R-NC00P Where used: North America CSA HRCI and UL Class Fuses (0 A shown) 27 Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. CSA fuse type: HRCI-J UL fuse type: Class J Voltage rating: V AC Interrupting rating: A Standard cartridge sizes: 0, 60, 100, 0, and 400 A Typical ampere ratings: 1 A; Blade type for bolted connection Can be installed on Bulletin 194R disconnect switch Cat. Nos: 194R-NJ00P, NJ060P, NJ100P, NJ0P, NJ400P Where used: North America 12 Rockwell Automation Publication 194R-TD001A-EN-P

13 Fuse Description 194R Rotary Disconnect Switches CSA HRCII Fuses (100 A shown) Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. CSA fuse type: HRCII-C Voltage rating: V AC Interrupting rating: A Standard cartridge sizes: 0, 60, 100, 0, and 400 A Typical ampere ratings: A Construction: Blade type for bolted connection Can be installed on Bulletin 194R disconnect switch Cat. Nos: 194R-NA0P, NA00P, NH100P, NH0P, NH400P Where used: Canada Standard Cartridge Sizes 0, 60, and 100 A Standard Cartridge Size 0 A Standard Cartridge Size 400 A Current Range A B C D E F G H J (-5/16) (2-51/64) 50.8 (2).64 (1/16) 8.7 (11/2) 7.54 (19/64) 5.56 (7/2) 2.81 (/16) 1.59 (1/16) (-1/2) (2-51/64) 50.8 (2).64 (1/16) 12.7 (1/2) 7.54 (19/64) 5.56 (7/2) (1-1/16) 1.59 (1/16) (4-5/16) (-41/64) (2-25/64) 4.1 (1-11/2) (/4) (/2) 8.7 (11/2) 4.9 (1-/8) 2.8 (/2) (5-5/16) (4-19/64) 76.2 () 8.1 (1-1/2) (/4) (/2) 8.7 (11/2).18 (1/8) (8-/16) 1.5 (5-1/4) 76.2 () 60. (2-/8) 25.4 (1) 12.7 (1/2) 9.5 (/8) 25.4 (1) 4.76 (/16) (8-/16) 1.5 (5-1/4) 76.2 () 76.2 () 25.4 (1).08 (19/2) 10.2 (1/2) 25.4 (1) 9.5 (/8) Rockwell Automation Publication 194R-TD001A-EN-P 1

14 194R Rotary Disconnect Switches Approximate Dimensions Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Disconnect Switch Dimension References A1, A2, B1, and B2 (0 A and 60 A) D W FD A E H Disconnect Switch Dimension Reference C B Approximate Dimensions mm (in) H W D A B C E FD A1 108 (4-1/4) 1 (4-/4) 101 (4) 90 (-9/16) 105 (4-1/8) 85 (-11/2) 82 (-/64) 2-M4, 2-#8 A2 108 (4-1/4) 1 (4-/4) 80 (-1/8) 90 (-9/16) 105 (4-1/8) 85 (-11/2) 82 (-/64) 2-M4, 2-#8 B1 11 (4-29/64) 142 (5-19/2) 114 (4-1/64) 100 (-/16) 1 (4-2/2) N/A N/A 4-M4, 4-#8 B2 11 (4-29/64) 142 (5-19/2) 9 (-4/64) 100 (-/16) 1 (4-2/2) N/A N/A 4-M4,4-#8 Mounting holes for backward compatibility with Bulletin 194R legacy switches. Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. 14 Rockwell Automation Publication 194R-TD001A-EN-P

15 Approximate Dimensions 194R Rotary Disconnect Switches UL/CSA Disconnect Switches A UL/CSA Non-Fused Disconnect Switches M J1 U Z Y Terminal Shrouds W R1 H N AA AC V K CA R2 T F AD C Cat. No. 194R-N Disconnect Switch Dimension Reference F1 400 F2 Approximate Dimensions mm (in) Overall Terminal Shrouds Switch Body Switch Mounting C AC AD 94.6 (.72) 94.6 (.72) 128 (4.92) 256 (10.1) 256 (10.1) 406 (16) 77.5 (.05) 77.5 (.05) 1 (4.) F (- pole) 180 (7.09) 180 (7.09) 20 (9.05) F (4- pole) 20 (9.06) 20 (9.06) 290 (11.4) H 107 (4.22) 107 (4.22) 166 (6.5) J1 (- pole) 55 (2.17) 55 (2.17) 75 (2.95) J1 (4- pole) 105 (4.1) 105 (4.1) (5.1) K 45.6 (1.8) 45.6 (1.8) 67.5 (2.65) M (- pole) 160 (6.) 210 (8.7) 160 (6.) 210 (8.7) 210 (8.26) M (4- pole) N R1 R2 270 (10.6) (5.1) (5.1) 195 (7.67) 9 (0.5) 7 (0.27) 9 (0.5) 7 (0.27) 9 (0.5) 7 (0.27) Cat. No. 194R-N Disconnect Switch Dim. Ref. Approximate Dimensions mm (in) Connection T U V W Y Z AA AC (1.97) 25 (0.98) 0 (1.18) 11 (0.4) F (1.97) 25 (0.98) 0 (1.18) 11 (0.4).5 (0.14).5 (0.14) 4.4 (0.14) 4.4 (0.14) 400 F2 65 (2.56) 45 (1.77) 50 (1.97) 1 (0.51) 5 (0.2) 5 (2.08) 160 (6.) (0.6) 160 (6.) (0.6) 260 (10.2) (0.8) Rockwell Automation Publication 194R-TD001A-EN-P

16 194R Rotary Disconnect Switches Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. H M Z J Ø 0.51 Ø 1 Y X AC N N1 AA. 80 F Cat. No. 194R-N Disconnect Switch Dim.Ref. F Approximate Dimensions mm (in) Terminal Shrouds Switch Body Switch Mounting Connection AC F (-pole) F (4-pole) H J (-pole) J (4-pole) 460 (18.12) 280 (11) 60 (14.17) 140 (5.5) (5) (6.59) M (- pole) 255 ( 10.0) M (4- pole) N N1 AA Z 5 (1.19) 175(6.88) 59.5 (2.4) (12.6) 47 (1.85) H Z Ø 0.4 Ø 11 J M Y X N2 N1 AC N F Cat. No. 194R-N Disconnect Switch Dimension Reference F4 Approximate Dimensions mm (in) Terminal Shrouds Switch Body Switch Mounting Connection AC F (-pole) F (4-pole) H 460 (18.12) 460 (18.12) 72 (14.64) 72 (14.64) 492 (19.7) 492 (19.7) 140 (5.5) 140 (5.5) J1 (- pole) 17.5 (6.8) 17.5 (6.8) J1 (4- pole) 2.5 (9.19) 2.5 (9.19) M (- pole) 47 (1.66) 47 (1.66) M (4- pole) N N1 AA Z 467 (18.8) 467 (18.8) 175 (6.88) 175 (6.88) 59.5 (2.4) 59.5 (2.4) 28 (1.10) 47 (1.85) 0 (1) 47 (1.85) 16 Rockwell Automation Publication 194R-TD001A-EN-P

17 Approximate Dimensions 194R Rotary Disconnect Switches Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. UL/CSA Fused Disconnect Switches Cat. No. 194R-J100 Frame Size F Cat. No. 194R-J0 Frame Size F6 Rockwell Automation Publication 194R-TD001A-EN-P 17

18 194R Rotary Disconnect Switches Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes (P) (4P) 259 (P) - 25 (4P) min 10.4 min fix (P) - fix (4P) fix 284 (P) - fix 78 (4P) fix 9.84 fix Cat. No. 194R-J400 Frame Size F Cat. No. 194R-J, -J800 Frame Size F8 Ø 0.51 Ø (P) (4P) 64 (P) (4P) Rockwell Automation Publication 194R-TD001A-EN-P

19 Approximate Dimensions 194R Rotary Disconnect Switches Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. IEC Disconnect Switches A IEC Non-Fused Disconnect Switches AC AA CA BA CA N J1 W M U1 J2 U V R 90 0 G K Z Y Terminal Shrouds BC A 125 (4.92) X1 T I T F T X2 AD H C 18 (0.71) D min. 45 (1.77) Cat. No. 194R-NE Cat. No. 194R-NE C 1 (4.5) 1 (4.5) 125 (4.92) 160 (6.0) 160 (6.0) Overall D (min.) AC AD 125 (4.92) 125 (4.92) (5.1) 165 (6.50) 165 (6.50) Approximate Dimensions mm (in) Terminal Shrouds Switch Body Switch Mounting 25 (9.25) 25 (9.25) 280 (11.02) 401 (.79) 401 (.79) 50 (1.97) 50 (1.97) 60 (2.6) 89 (.50) 89 (.50) F (- pole) 140 (5.51) 140 (5.51) 180 (7.09) 20 (9.05) 20 (9.05) T U U1 V W 6 (1.41) 6 (1.41) 50 (1.97) 65 (2.56) 65 (2.56) (0.79) (0.79) 25 (0.98) 2 (1.26) 2 (1.26).5 (0.81).5 (0.81) 25.5 (1.00) 45.5 (1.79) 45.5 (1.79) 25 (0.98) 25 (0.98) 0 (1.18) 7.5 (1.48) 7.5 (1.48) 9 (0.5) 9 (0.5) 11 (0.4) 11 (0.4) 11 (0.4) F (4- pole) G H 170 (6.69) 170 (6.69) 20 (9.06) 290 (11.40) 290 (11.40) 9 (.66) 9 (.66) 108 (4.25) 170 (6.69) 170 (6.69) 65 (2.56) 65 (2.56) 75 (2.95) 110 (4.) 110 (4.) Approximate Dimensions mm (in) X1 (- pole) 28 (1.10) 28 (1.10) (1.0) 42.5 (1.67) 42.5 (1.67) Connection J1 (- pole) 45 (1.77) 45 (1.77) 55 (2.17) 75 (2.95) 75 (2.95) J1 (4- pole) J2 K BC 75 (2.95) 75 (2.95) 105 (4.1) (5.1) (5.1) 75 (2.95) 75 (2.95) 105 (4.1) (5.1) (5.1) 1.5 (1.24) 1.5 (1.24) 4 (1.4) 55 (2.17) 55 (2.17) 80 (.) 80 (.) 1 (4.5) 1 (4.5) 1 (4.5) X1 (4- pole) X2 Y Z AA BA AC 22 (87) 22 (87) (1.0) 7.5 (1.48) 7.5 (1.48) (0.79) (0.79) 27 (1.06) 7.5 (1.48) 7.5 (1.48).5 (0.14).5 (0.14).5 (0.14) 5 (0.) 5 (0.).5 (0.81).5 (0.81) 22.5 (0.89) 6 (1.41) 6 (1.41) (5.1) (5.1) 160 (6.0) 25 (9.25) 25 (9.25) 1 (4.5) 1 (4.5) 10 (5.12) 5 (8.07) 5 (8.07) 10 (0.9) 10 (0.9) (0.60) (0.60) (0.79) M (- pole) 1 (4.72) 1 (4.72) 160 (6.0) 210 (8.28) 210 (8.28) M (4- pole) N R 0 (5.90) 0 (5.90) 80 (.) 270 (10.60) 270 (10.60) 65 (2.56) 65 (2.56) 210 (8.27) 140 (5.51) 140 (5.51) 5.5 (0.21) 5.5 (0.21) 5.5 (0.21) 7 (0.28) 7 (0.28) Rockwell Automation Publication 194R-TD001A-EN-P 19

20 194R Rotary Disconnect Switches Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Cat. No. 194R-N 470 (18.50) AA = 175 (6.89) = X1 U M = = V T I T F 90 T X2 28 (1.10) 0 ø9 (0.5) Z Y 0 (12.99) = = 86 (.9) (5.51) (1.02) 49 (1.9) 166 (6.54) Approximate Dimensions mm (in) Terminal Screens 2 (8.46) 14 (0.55) Switch Body Switch Mounting Connection F (-pole) F (4-pole) M (-pole) M (4-pole) T U V Y X1 X2 Z AA (11.02) 60 (14.17) 255 (10.04) 5 (1.19) 80 (.) 50 (1.97) 60.5 (2.8) 7 (0.27) 47.5 (1.87) 47.5 (1.87) 46.5 (1.8) 21 (12.64) 1 72 (14.65) 492 (19.7) 47 (1.66) 467 ( (4.72) 90 (.54) 44 (1.7) 8 (0.1) 5.5 (2.11) 5.5 (2.11) 47.5 (1.87) 288 (11.4) Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Rockwell Automation Publication 194R-TD001A-EN-P

21 Approximate Dimensions 194R Rotary Disconnect Switches IEC Fused Disconnect Switches fix (0.22) (1.14) 4.8 (0.19) 14.5 (0.57) min 50 (1.97) max 20 (9.06) 1 4 pre-break auxiliary contacts for signalling Terminal shrouds 179 (7.05) for BS88 / NFC and DIN A 189 (7.44) for NFC and DIN A 68 (2.68) 41 (1.61) (0.79) 6 (1.42) (1.42) (5.8)(P) 184 (7.24)(4P) Ø8.7 (0.4) 8 (0.4) min 19 (5.47) max 145 (5.71) 12 (5.) 1(1.22) 141 (5.55) 2.5 (0.10) 62 (2.44) 2.5 (0.10) 141 (5.55) fix 127 (5.0) (4.98) fix 52.5* (2.07) Ø8.5 (0.) 40 fix 6 (1.57) (1.42) (2.1) (0.21) 5 (1.8) 18 (0.71) 5 (2.09) 162 (6.8) 5 (2.09) 2.5 (0.10) 19.5 (0.77) (0.79) 6 (1.42) (1.42) 6 Cat. No. 194R-B , 194R-D Frame Size F1 Rockwell Automation Publication 194R-TD001A-EN-P 21

22 194R Rotary Disconnect Switches Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. fix 5.5 (0.22)(1.14) (0.19) 14.5 (0.57) min 50 (1.97) max 20 (9.06) 1 4 pre-break auxiliary contact for signalling Terminal shrouds 68 (2.68) (0.79) 50 (1.97) 50 (1.97) 190 (7.48) (P) 240 (9.45) (4P) 8 Ø8.7 (0.1) (0.4) 41 (1.61) min 145 (5.71) max 225 (8.86) 16.5 (5.7) 1 (1.22) 54 (2.1) 5.4 (0.21) fix 50 (1.97) 68 (2.68) 5 (1.8) 18 (0.71) 174 (6.85) 2.5 (0.10) 62 (2.44) 2.5 (0.10) 141 (5.55) fix 140 (5.5) (4.98) fix 52.5* (2.07) Ø8.5 (0.) 5 (2.09) 162 (6.8) 5 (2.09) 229 (9.02) 2.5 (0.10) 19.5 (0.77) (0.79) 50 (1.97) 50 (1.97) Cat. No. 194R-B , 194R-D Frame Size F14 22 Rockwell Automation Publication 194R-TD001A-EN-P

23 Approximate Dimensions 194R Rotary Disconnect Switches Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. fix 5.5 (0.22) 29 (1.14) 4.8 (0.19) 14.5 (0.57) min 50 (1.97) max 20 (9.06) 1 8 pre-break auxiliary contact for signalling Terminal shrouds 68 (2.6) 52 (2.05) min 4 (6.06) max 225 (8.86) 146 (5.75) 2 (1.26) 64 (2.52) 6.4 (0.25) 60 (1.26) fix 60 (2.6) 60 (1.26) 24 (9.21) (P) 294 (11.57) (4P) Ø11 (0.4) 17 (0.67) 25 (0.98) P 86 (.9) 5 4P 146 (5.75) (1.8) 1 (1.22) 75 (2.95) 185 (7.28) 84 (.) 2.5 (0.10) 2.5 (0.10) 166 (6.54) fix 162 (6.8) (4.98) fix 52.5 (2.07) Ø11 (0.4) 195 (7.68) 75 (2.95) 251 (9.88) 2.5 (0.10) 19.5 (0.77) 2 (1.26) 60 (1.26) Cat. No. 194R-B0-175, 194R-D-175 Frame Size F 60 (1.26) Rockwell Automation Publication 194R-TD001A-EN-P 2

24 194R Rotary Disconnect Switches Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. fix 5.5 (0.22) 29 (1.14) 4.8 (0.19) 14.5 (0.57) min 50 (1.97) max 20 (9.06) 1 8 pre-break auxiliary contact for signalling Terminal shrouds 54 (2.1) 50 (1.97) 66 (2.60) 66 (2.60) Ø11 (0.4) 14.5 (0.57) 252 (9.92) (P) 18 (12.52) (4P) min 7 (6.18) max 225 (8.86) 149 (5.87) 1 (1.22) 70 (2.76) 6.4 (0.25) fix 66 (2.60) 91 (.58) 25 (0.9) 5 (1.8) 84 (.1) fix 172 (6.77) (4.9) fix 52.5 (2.07) 175 (6.89) 5 (8.07) (0.12) 75 (2.95) 68 (2.6) 260 (10.24) (0.12) (0.79) 0 (7.87) (0.12) Ø11 (0.4) 50 (1.97) 66 (2.60) 66 (2.60) 75 (2.95) Cat. No. 194R-B , 194R-D Frame Size F16 24 Rockwell Automation Publication 194R-TD001A-EN-P

25 Approximate Dimensions 194R Rotary Disconnect Switches Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes (0.57) 10.5 (0.41) 11.5 (0.45) 85.5 (.7) Direct operation 1 8 pre-break auxiliary contact for signalling Terminal shrouds min 265 (10.4) (9.84) 5 (6.10) 68 (2.68) 51 (2.01) (.70) (.70) (0.79) 64 (14.) (P) 458 (18.0) (4P) Fix 284 (11.18) (P) Fix 78 (14.88) (4P) 65 (2.56) 4 (1.4) 46 (1.81) min (0.59) min 265 (10.4) 79.5 (.1) 85.5 (.7) 11(0.4) 80 (14.96) 7 (0.28) 59 (2.2) 7 (0.28) 00 (1.82) 7 (0.28) 90 (.54) 00 (1.82) 260 (10.24) 85.5 (.7) fix (9.4) Ø1 (0.51) 51 (2.01) 94 (.70) 94 (.70) Cat. No. 194R-B60-175, 194R-D60-175, 194R-B , 194R-D Frame Size F17 9 (0.5) 22 (0.87) 25.5 (9.27) 25.5 (9.27) Rockwell Automation Publication 194R-TD001A-EN-P 25

26 194R Rotary Disconnect Switches Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes ) Direct operation 10.5 (0.41) 1 8 pre-break auxiliary contact for signalling 11.5 (0.45) 85.5 (.7) Terminal shrouds 68 (2.68) min 04 (11.97) 1 (4.72) 1 (4.72) 442 (17.40) (P) 562 (22.1) (4P) 46 (1.81) min (0.59) min 04 (11.97) 289 (11.8) 160 (6.0) fix 62 (14.25) (P) fix 482 (18.98) (4P) 88 (.47) 79.5 (.1) 87.5 (.44) 11 (0.4) 4 (1.4) 7 (0.28) 59 (2.2) 55 (1.98) 7 (0.28) 90 7 (0.28) 00 (11.82) 260 (10.24) fix (9.84) 87.5 (.44) 1 (4.72) 1 (4.72) 22 (0.87) 27.5 (9.5) 27.5 (9.5) 295 (11.61) Cat. No. 194R-B1-175, 194R-D1-175 Frame Size F18 26 Rockwell Automation Publication 194R-TD001A-EN-P

27 Approximate Dimensions 194R Rotary Disconnect Switches Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Operating Handles Cat. Nos. 194R-P /140U-P mm ( ) 80 (.) 114 (4.49) 72. (2.85) 26.7 (1.05) 25.4 (1) Front of Cover ø 5 (ø 1.8) 76.7 (.02) Front 4 (1.4) 50 (1.97) 25 (0.98) 25 (0.98) 50 (1.97) 51 (2.01) Right Side OR 25 (0.98) ø 5 (ø 1.8) 1.5 (1.24) 6 (2.48) (2) - ø 5.5 (0.22) (2) - ø 5.5 (0.22) Rockwell Automation Publication 194R-TD001A-EN-P 27

28 194R Rotary Disconnect Switches Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Operating Handles Cat. No. 194R-HM4, -HM4E dia. dia. Operating Handles Cat. No. 194R-HM4-L, -HM4E-L, -HM4-N2-L, -HM4E-N2-L Ø 78 (.07) 90 I 4 Ø 7 (0.27) Ø 7 (1.46) 0 (0.78) 210 (8.27) 14 (0.55) 14 (0.55) (0.78) 61 (2.40) 28 Rockwell Automation Publication 194R-TD001A-EN-P

29 Approximate Dimensions 194R Rotary Disconnect Switches Disconnect Switch Dim. Ref.: A1, A2, B1, B2 (0 A and 60 A) Enclosure and Operating Handle Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Enclosure Installation Dimensions Cat. No. 194R-B R-B R-C R-F R-J0-175 Dimension Reference A B C D E F Minimum Minimum Minimum Maximum Minimum Minimum Minimum Maximum A1 171 (6-/4) 45 (1-49/64) (5-1/16) 454 (17-7/8) 248 (9-/4) 89 (-1/2) 1.4 (1/16) 4/78 (/16) 194R-N0-175 A2 171 (6-/4) 45 (1-49/64) 111 (4-/8) 454 (17-7/8) 248 (9-/4) 89 (-1/2) 1.4 (1/16) 4/78 (/16) 194R-B R-D R-D R-F R-H R-H R-J B1 197 (7-/4) 45 (1-49/64) (5-1/16) 454 (17-7/8) 248 (9-/4) 105 (4-9/64) 1.4 (1/16) 4/78 (/16) 194R-N B2 197 (7-/4) 45 (1-49/64) 111 (4-/8) 454 (17-7/8) 248 (9-/4) 105 (4-9/64) 1.4 (1/16) 4/78 (/16) Rockwell Automation Publication 194R-TD001A-EN-P 29

30 194R Rotary Disconnect Switches Approximate Dimensions NFPA 79 Internal Handle with Shaft Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. L X Y Z Catalog No. 194R -NHR1 194R -NHR2 mm (in.) mm (in.) L X Y Z (max) 05 (12) 5 (21) 8 (1-1/2) 8 (1-1/2) 76 () 76 () 57 (2-1/4) 57 (2-1/4) Y D1 W W1 X Y H 194R-B-* 194R-B2-* 194R-C0-* Catalog No. 194R-F25-* 194R-F2-* 194R-J0-* Dim. Ref. A1 mm (in.) H 108 (4-1/4) W 1 (4-/4) W1 19 (/4) D1 (min) 184 (7-1/4) X 8 (1-1/2) Y 76 () 194R-N0-* A2 mm (in.) 108 (4-1/4) 1 (4-/4) 19 (/4) 160 (6-5/16) 8 (1-1/2) 76 () 194R-B6-* 194R-D2-* 194R-D6-* 194R-F6-* 194R-H0-* 194R-H60-* 194R-J60-* B1 mm (in.) 11 (4-29/64) 142 (5-19/2) 19 (/4) 196 (7-49/64) 8 (1-1/2) 76 () 194R-N60-* B2 mm (in.) 11 (4-29/64) 142 (5-19/2) 19 (/4) 176 (6-59/64) 8 (1-1/2) 76 () 0 Rockwell Automation Publication 194R-TD001A-EN-P

31 Approximate Dimensions 194R Rotary Disconnect Switches Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. IP66 (Type /4/12) Watertight, Dusttight Sheet Metal Enclosure A G D C 7.1 (9/2) 76.0 (.0) E F H B 6.0 (/64) Four Mounting Holes Ø 5.5 (.218) External Mounting Feet Optional Cat. No. 198-F1 Type Dim. Ref. A B C D E F G H 0 60 Non-Fused & Fused Non-Fused & Fused A1 & A2 0 (7-7/8) B1 & B2 0 (7-7/8) 00 (11-1/16) 00 (11-1/16) 160 (6-19/64) 0 (7-7/8) 160 (6-19/64) 0 (7-7/8) 25 (12-51/64) 25 (12-51/64) 1 (12-21/64) 1 (12-21/64) 105 (4-1/8) 26 (9-9/2) 105 (4-1/8) 26 (9-9/2) Type 4/4X Watertight, Corrosion-Resistant Stainless Steel Enclosure A1 A G D C B E F External Mounting Feet Optional Cat. No. 198-F Type Dim. Ref. A A1 B C D E F G H 0 Non-Fused A2 9 (6-1/4) 170 (6-11/16) Fused A1 214 (8-7/16) 225 (8-7/8) 60 Non-Fused & Fused B1 & B2 214 (8-7/16) 225 (8-7/8) 240 (9-7/16) 265 (10-7/16) 265 (10-7/16) 12 (4-27/2) 16 (6-7/16) 254 (10 ) 27 (10-/4 8 (-1/4) 160 (6-5/16) 0 (7-7/8) 279 (11) 160 (6-5/16) 0 (7-7/8) 279 (11) 298 (11-2/2) 298 (11-2/2) 8 (-1/4) 8 (-1/4) Rockwell Automation Publication 194R-TD001A-EN-P 1

32 194R Rotary Disconnect Switches Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. IP66 (Type /4/4X/12) Corrosion-Resistant, Non-Metallic Enclosure K A 6.0 (/64) H D C F B J 2.0 (1-1/4) G Four Slot Mounting Holes 8 x 1 (0.1 x 0.50) Cat. No. 194R-K_0P, -K60P 0 and 60 A switch K 5.0 (/16) A H D C F B J 2.0 (1-1/4) G Four Slot Mounting Holes 8 x 1 (0.1 x 0.50) Cat. No. 194R-K_100P 100 A switch Switch Size A B C D F G J K 0/ (8-59/64) 267 (10-1/2) 16 (6-27/64) 2 (7-61/64) 278 (10-61/64) 2 (6) 05 (12) 6 (/64) 2 Rockwell Automation Publication 194R-TD001A-EN-P

33 Approximate Dimensions 194R Rotary Disconnect Switches Dimensions are in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. 2.4 (6) 12.8 (4-7/8) mm (in.) 100 ( - /16).2 (8) Ref..4 (10) Min. 194R-FC Cable-Operated Handle Rockwell Automation Publication 194R-TD001A-EN-P

34 194R Rotary Disconnect Switches Specifications 4 Rockwell Automation Publication 194R-TD001A-EN-P

35 Specifications 194R Rotary Disconnect Switches Rockwell Automation Publication 194R-TD001A-EN-P 5

36 194R Rotary Disconnect Switches Specifications 6 Rockwell Automation Publication 194R-TD001A-EN-P

37 Specifications 194R Rotary Disconnect Switches Rockwell Automation Publication 194R-TD001A-EN-P 7

38 194R Rotary Disconnect Switches Specifications 8 Rockwell Automation Publication 194R-TD001A-EN-P

39 Specifications 194R Rotary Disconnect Switches Rockwell Automation Publication 194R-TD001A-EN-P 9

40 194R Rotary Disconnect Switches Specifications 40 Rockwell Automation Publication 194R-TD001A-EN-P

41 Specifications 194R Rotary Disconnect Switches Rockwell Automation Publication 194R-TD001A-EN-P 41

42 Important User Information Read this document and the documents listed in the additional resources section about installation, configuration, and operation of this equipment before you install, configure, operate, or maintain this product. Users are required to familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws, and standards. Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to be carried out by suitably trained personnel in accordance with applicable code of practice. If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment. The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and diagrams. No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this manual. Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited. Documentation Feedback Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete this form, publication RA-DU002, available at Allen-Bradley, Rockwell Software, Rockwell Automation, and LISTEN. THINK. SOLVE are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat: İçerenköy, İstanbul, Tel: +90 (216) Publication 194R-TD001A-EN-P - August 14 Copyright 14 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.

Bimetallic Overload Relay Specifications

Bimetallic Overload Relay Specifications Technical Data Bimetallic Overload Relay Specifications Bulletin Number 193K, 193T1 Topic Page Product Overview 2 Standards compliance and Certifications 2 General Specifications 193K 3 Approximate Dimensions

More information

Molded Case Circuit Breaker Specifications Bulletin Number 140U-D

Molded Case Circuit Breaker Specifications Bulletin Number 140U-D Technical Data Molded Case Circuit Breaker Specifications Bulletin Number 140U-D Topic Page Product Line Overview 2 Specifications 3 Trip Curves 4 Approximate Dimensions 6 Additional Resources These documents

More information

Control and Load Switch Specifications

Control and Load Switch Specifications Technical Data Control and Load Switch Specifications Bulletin Number 194E, 194L Topic Page Product Line Overview 2 194E General Specifications 3 194E Approximate Dimensions 5 194L Circuit Diagrams 11

More information

Industrial Tower Uninterruptible Power Supply Specifications Bulletin Numbers 1609-P

Industrial Tower Uninterruptible Power Supply Specifications Bulletin Numbers 1609-P Technical Data Industrial Tower Uninterruptible Power Supply Specifications Bulletin Numbers 1609-P Topic Page 1609-P Specifications 2 1609-P Approximate Dimensions and Shipping Weights 3 Additional Resources

More information

1756 ControlLogix Chassis Specifications

1756 ControlLogix Chassis Specifications Technical Data 1756 ControlLogix Chassis Specifications Catalog Numbers 1756-A4/B, 1756-A4K/B, 1756-A4/C, 1756-A4K/C, 1756-A7/B, 1756-A7K/B, 1756-A7/C, 1756-A7K/C, 1756-A10/B, 1756-A10K/B, 1756-A10/C,

More information

Disconnect switches Non-fusible Fusible

Disconnect switches Non-fusible Fusible Disconnect switches Non-fusible Fusible Low voltage disconnect switches from ABB ABB is committed to offering high quality and innovative low voltage products. ABB s disconnect switch lines are no exception.

More information

SMC -3 Specifications

SMC -3 Specifications Technical Data SMC -3 Specifications Bulletin Number 150 Topic Page Product Overview 2 Standards Compliance and Certifications 2 Features 3 Catalog Number Explanation 4 Wiring Diagrams 6 General Specifications

More information

CompactLogix Power Supplies Specifications

CompactLogix Power Supplies Specifications Technical Data CompactLogix Power Supplies Specifications 1768 CompactLogix Power Supplies Catalog Numbers 1768-PA3, 1768-PB3 1769 Compact I/O Power Supplies Catalog Numbers 1769-PA2, 1769-PB2, 1769-PA4,

More information

Selection Guide. Bulletin 194R/140U External Operating Handles

Selection Guide. Bulletin 194R/140U External Operating Handles Selection Guide Bulletin 194R/140U Bulletin 194R/140U Notes 2 Bulletin 194R/140U Product Overview/Product Selection Bulletin 194R/140U Next Generation Disconnect Handles Available in matte black for ON-OFF

More information

K1F003MCH cam ammeter switch - 3 circuits A - for Ø 22 mm

K1F003MCH cam ammeter switch - 3 circuits A - for Ø 22 mm Characteristics cam ammeter switch - 3 circuits - 90-12 A - for Ø 22 mm Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product

More information

K1F003MCH cam ammeter switch - 3 circuits A - for Ø 22 mm

K1F003MCH cam ammeter switch - 3 circuits A - for Ø 22 mm Characteristics cam ammeter switch - 3 circuits - 90-12 A - for Ø 22 mm Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product

More information

DLA starters General information

DLA starters General information General information The construction of is based on ABB A Line contactors. The mounting plate, including a built-in A contactor, is designed to integrate an ABB manual motor starter type MS325. Starters

More information

K1H014MLH cam ammeter switch - 4 circuits A - screw mounting

K1H014MLH cam ammeter switch - 4 circuits A - screw mounting Characteristics cam ammeter switch - 4 circuits - 90-12 A - screw mounting Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product mounting Fixing

More information

PLUGS & RECEPTACLES. INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357

PLUGS & RECEPTACLES. INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357 Series Features: Color coding and pin configuration makes it physically impossible to mate plugs and receptacles of different voltages and current ratings (per IEC 60 309-2). Interlocked switch mechanism

More information

1788 Linking Device Specifications

1788 Linking Device Specifications Technical Data 1788 Linking Device Specifications Catalog Numbers 1788-EN2DNROM, 1788-EN2DNR, 1788-EN2FFR, 1788-EN2PAR, 1788-CN2DN, 1788-CN2FFR, 1788-CN2PAR, 1788-FBJB4R, 1788-FBJB6 Topic Page 1788-EN2DNR

More information

Bulletin 150 Smart Motor Controllers SMC-3 Smart Motor Controller

Bulletin 150 Smart Motor Controllers SMC-3 Smart Motor Controller Overview/Modes of Operation Bulletin 150 Smart Motor Controller The SMC-3 is a compact, simple to use, solid-state motor controller designed to operate 3-phase motors. It features a built-in overload relay

More information

Circuit Breakers. Next Generation of Protection Capabilities

Circuit Breakers. Next Generation of Protection Capabilities Circuit Breakers Next Generation of Protection Capabilities Circuit Breaker Offering Rockwell Automation offers a full line of Allen-Bradley circuit breakers and motor protection devices to help meet many

More information

Mini Circuit Breakers, Fuse Blocks, and Electronic Circuit Protection

Mini Circuit Breakers, Fuse Blocks, and Electronic Circuit Protection Technical Data Mini Circuit Breakers, Fuse Blocks, and Electronic Circuit Protection Topic Page 1489-M Miniature Circuit Breakers 2 1492-SP Supplementary Protectors 15 1492-D Circuit Breakers 27 188 Regional

More information

CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH

CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH Cat transfer switches are designed for a variety of standby power applications. They provide flexibility, reliability and value in a

More information

CAT ATC CONTACTOR- BASED BYPASS ISOLATION AUTOMATIC TRANSFER SWITCH

CAT ATC CONTACTOR- BASED BYPASS ISOLATION AUTOMATIC TRANSFER SWITCH CAT ATC CONTACTOR- BASED BYPASS ISOLATION AUTOMATIC TRANSFER SWITCH Cat transfer switches are designed for a variety of standby power applications. They provide flexibility, reliability and value in a

More information

Section 8. IEC Switches and Disconnects. Control Catalog 8-1

Section 8. IEC Switches and Disconnects.  Control Catalog 8-1 Introduction...8-2 Mountg Styles and Availability...8-3 Open Ma Switches Product Tables...8-4 Enclosed Switches Product Tables...8-7 Emergency Stop Switches with Undervoltage Release...8-8 Accessories...8-9

More information

AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals

AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101403D0201 24/03/11 AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF09(Z) contactors are used for controlling power circuits

More information

CAT ATC MOLDED CASE CIRCUIT BREAKER AND MOLDED CASE SWITCH AUTOMATIC TRANSFER SWITCH

CAT ATC MOLDED CASE CIRCUIT BREAKER AND MOLDED CASE SWITCH AUTOMATIC TRANSFER SWITCH CAT ATC MOLDED CASE CIRCUIT BREAKER AND MOLDED CASE SWITCH AUTOMATIC TRANSFER SWITCH Cat transfer switches are designed for a variety of standby power applications. They provide flexibility, reliability

More information

End of Life: 1494V Variable-depth Disconnect Switch (30 100 A) End of Life: 1494C Cable-operated. Product Lifecycle

End of Life: 1494V Variable-depth Disconnect Switch (30 100 A) End of Life: 1494C Cable-operated. Product Lifecycle Migration Solutions 1494V Rod-operated and 1494C Cable-operated Disconnect Switches to 1494U Universal Disconnect Switch 1494U Universal Visible-Blade Disconnect Switch Features and Benefits Users who

More information

PSR The compact range Description

PSR The compact range Description Description The PSR range is the most compact of all the ABB softstarter ranges, thereby making it possible to fit many devices into the same enclosure. The system concept with Manual Motor Starters provides

More information

Electronic overload relay EF19 and EF45

Electronic overload relay EF19 and EF45 Data sheet Electronic overload relay EF19 and EF45 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor

More information

Cam switches. CQ Series

Cam switches. CQ Series Cam switches CQ Series CQ Series Overview The range of cam switches CQ series includes ratings from to A with insulation voltage of 69V. According to the latest industrial application standards, CQ series

More information

SERIES VN HEAVY DUTY OFF-ON CAM SWITCHES

SERIES VN HEAVY DUTY OFF-ON CAM SWITCHES TO AMPS OFF-ON CAM SWITCHES OFF - ON SWITCH Open Type 5 Amp to Amp, 600 Volt 400 Amp to Amp, 690 Volt 4 Pole (0-1) 45º Switch Angle 600 Volt CSA/UL General Purpose IEC No. Chambers Catalog Number Front

More information

Low Voltage Switches. Enclosed switches - eot Manual motor controllers and disconnects

Low Voltage Switches. Enclosed switches - eot Manual motor controllers and disconnects Low Voltage Switches Enclosed switches - eot Manual motor controllers and disconnects The next generation of enclosed switches General information The eot series of enclosed manual motor controllers are

More information

NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals

NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101433D0201 28/03/11 NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits.

More information

Breakers and Switches. Switches Switch-disconnectors OT, OETL, OTDC and OTM

Breakers and Switches. Switches Switch-disconnectors OT, OETL, OTDC and OTM Breakers and Switches Switches Switch-disconnectors OT, OETL, OTDC and OTM Switch-disconnectors OT 16...2500, OETL 3150, OTDC16...32 and OTM160...2500 Contents 4 Product overview, features 8 Technical

More information

Breakers and Switches. Enclosed switches eot Enclosed disconnect switches Manual motor controllers

Breakers and Switches. Enclosed switches eot Enclosed disconnect switches Manual motor controllers Breakers and Switches Enclosed switches eot Enclosed disconnect switches Manual motor controllers The next generation of enclosed switches General information The eot series of enclosed manual motor controllers

More information

3RT1015-1BB41 CONTACTOR, AC-3 3 KW/400 V,

3RT1015-1BB41 CONTACTOR, AC-3 3 KW/400 V, Automation Technology > Industrial Controls > Switching Devices > Contactors and Contactor Assemblies > Power Contactors for Switching Motors > Contactors SIRIUS 3RT10, 3-pole, 3... 250 kw 3RT1015-1BB41

More information

Electronic overload relay EF65, EF96 and EF146

Electronic overload relay EF65, EF96 and EF146 Data sheet Electronic overload relay EF65, EF96 and EF146 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays.

More information

Catalog January. Heavy industrial power applications Motor contactors and starters

Catalog January. Heavy industrial power applications Motor contactors and starters Catalog January Heavy industrial power applications Motor contactors and starters 2006 General contents 0 Heavy Industrial Power Applications Motor Contactors and Starters 1 Contactors and Starters, Type

More information

n Choice of equipment SP 58 Index of protection: IP 2X - IP 2XC - under front plate

n Choice of equipment SP 58 Index of protection: IP 2X - IP 2XC - under front plate SP fuse carriers with protected terminals SP fuse carriers with protected terminals www.klinkmann.com n Choice of equipment Maximum cartridge rating Type Rated current 400 V± 0 V± 690 V± gg am gg am gg

More information

Plug and Socket Devices CES 63 A Series 8579

Plug and Socket Devices CES 63 A Series 8579 www.stahl.de > Switch socket / plug 63 A > Large switch handle with clear switch position indication padlockable in 0- and I-position > Low insertion and withdrawal forces through individually encapsulated

More information

Emergency stop As an emergency switching off/emergency stop device. Standards According to IEC/EN 60204-1, VDE 0113 Part 1

Emergency stop As an emergency switching off/emergency stop device. Standards According to IEC/EN 60204-1, VDE 0113 Part 1 MainswitchSurfacemounting Partno. P3-63/I4/SVB Articleno. 207343 CatalogNo. SP3-063-I4CRQ IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual

More information

Bulletin 700-HP PCB Pin Style Relay

Bulletin 700-HP PCB Pin Style Relay Bulletin 700-HP PCB Pin Style Relay Bulletin 700 HP (PCB) "Pin Style Relay 8 A contact ratings DPDT/ (2 c/o) contacts Plug-in PIN style (PCB) terminals (5 mm pinning) Choice of standard silver nickel contacts,

More information

Legacy PanelView to PanelView Plus 6 Catalog Number Conversions

Legacy PanelView to PanelView Plus 6 Catalog Number Conversions Migration Guide Legacy PanelView to PanelView Plus 6 Catalog Number Conversions Topic Page About This Publication 1 Platform Replacements 2 HMI Software 4 Catalog Number Conversion Tables 4 PanelView Standard

More information

Cam switches. CQ Series

Cam switches. CQ Series Cam switches CQ Series CQ Series Overview The range of cam switches CQ series includes ratings from to A with insulation voltage of 69V. According to the latest industrial application standards, CQ series

More information

Manual motor starter MS116

Manual motor starter MS116 Data sheet Manual motor starter MS116 Manual motor starters are electromechanical devices for motor and circuit protection. These devices offer local motor disconnect means, manual ON/ OFF control, and

More information

Three-phase monitoring relay CM-PFE

Three-phase monitoring relay CM-PFE Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics

More information

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage

More information

Series KTU7 UL489 Molded Case Circuit Breakers

Series KTU7 UL489 Molded Case Circuit Breakers Series KTU7 UL489 Molded Case Circuit Breakers Versatile, convenient and space saving for a variety of applications Sprecher+Schuh s KTU7 series of UL Molded Case Circuit Breakers are UL489 and CE listed

More information

Bulletin 150 SMC Flex Smart Motor Controller Specifications

Bulletin 150 SMC Flex Smart Motor Controller Specifications Specifications Specifications Standard Features Optional Features Installation Setup Communications Power Wiring Control Wiring Keypad Software Starting and Stopping Modes Protection and Diagnostics Metering

More information

MTE RLW Reactors Price book

MTE RLW Reactors Price book Table of Contents TABLE OF CONTENTS...1 STANDARD DELIVERY SCHEDULE...2 SELECTION & APPLICATION GUIDE...3 SPECIFICATION DATA...4 SERVICE FACTOR...4 AMBIENT TEMPERATURE...4 APPROVALS...4 ENCLOSURES:...4

More information

Measuring and monitoring relays CM-MSS (4), CM-MSS (5) Thermistor motor protection relays

Measuring and monitoring relays CM-MSS (4), CM-MSS (5) Thermistor motor protection relays Data sheet Measuring and monitoring relays CM-MSS (4), Thermistor motor protection relays The devices CM-MSS (4) and (5) are used to monitor the overload of motors by the wiring temperature. The motors

More information

Micro800 Programmable Controllers. Bulletin 2080 Selection Guide

Micro800 Programmable Controllers. Bulletin 2080 Selection Guide Micro800 Programmable Controllers Bulletin 2080 Selection Guide Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety

More information

Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact

Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only

More information

SPEEDFAX TM 2011 Disconnect Switches Contents

SPEEDFAX TM 2011 Disconnect Switches Contents SPEEDFAX TM 2011 Disconnect es Contents Compact Non-Fusible es Rotary and Toggle Selection 5-2 5-4 Dimensions and Wire Ranges 5-5 Type VBII (30-600A) Features and Ordering Information 5-6 and Handle Selection

More information

RLW Reactors Technical Reference Manual

RLW Reactors Technical Reference Manual Form: RLW-TRM-E Rel: March 2011 Form RLW-TRM-E March 2011 Page 1 Table of Contents STANDARD DELIVERY SCHEDULE... 3 SELECTION & APPLICATION GUIDE... 4 MODEL CODE PART NUMBER CONFIGURATION... 5 RL REACTOR

More information

Current valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw

Current valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw 4 937 DESIO Current valve for AC 24 V pulse/pause control of electrical loads up to 30 kw SEA45.1 Use The current valve is used for the control of electric heating elements in heating, ventilation and

More information

R.C.C.B. s two-pole LEXIC

R.C.C.B. s two-pole LEXIC 87045 LIMOGES Cedex Telephone : (+33) 05 55 06 87 87 Fax : (+ 33) 05 55 06 88 88 R.C.C.B. s two-pole LEXIC 089 06/09/10/11/12/15/16/17/18/ 27/28/29/30/35, CONTENTS PAGES 1. Electrical and mechanical characteristics...

More information

ENCLOSED MOTOR PROTECTION CIRCUIT BREAKERS. Accessories 137. Specifications 138. Dimensions 139

ENCLOSED MOTOR PROTECTION CIRCUIT BREAKERS. Accessories 137. Specifications 138. Dimensions 139 When you need reliable overload and short circuit protection for your motor control application, look to c3controls. Our New Series Enclosed Motor Protection Circuit Breakers are ideal for use in multi-motor

More information

GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector

GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector Class 525/580 CONTENTS Description Page General characteristics............................................... 1 Circuit breaker......................................................

More information

ELFA E90S MINI BREAKERS

ELFA E90S MINI BREAKERS ELFA E90S MINI BREAKERS - ELFA E90S SERIES UL Approved (UL1077) 10KA INTERUPTION CAPACITY OPTIONS FIELD KITS Auxiliary Contacts Alarm Contact Shunt Trip UV Trip Current Limiting Design (Class 3) 3 Different

More information

Bulletin 194L Control And Load Switches

Bulletin 194L Control And Load Switches Bulletin 19L Control And Load Switches Bulletin 19L IEC Control and Load Switches Bulletin 19L control and load switches are flexible, adaptable, time- and space-saving devices. Switches are available

More information

MTE SERIES RLW. World REACTORS USER MANUAL PART NO. INSTR 030 REL. 090930. 2009 MTE Corporation

MTE SERIES RLW. World REACTORS USER MANUAL PART NO. INSTR 030 REL. 090930. 2009 MTE Corporation MTE SERIES RLW World REACTORS USER MANUAL PART NO. INSTR 030 REL. 090930 2009 MTE Corporation IMPORTANT USER INFORMATION NOTICE MTE Series RLW reactors are components designed to improve the reliability

More information

TeSys protection components Mini-VARIO and VARIO switch disconnectors. 4 Switch type. Selection guide. VpD 0 VpF 0. VpF 01 4/2

TeSys protection components Mini-VARIO and VARIO switch disconnectors. 4 Switch type. Selection guide. VpD 0 VpF 0. VpF 01 4/2 Selection guide TeSys protection components Mini-VARIO and VARIO switch disconnectors Applications Mini-Vario and Vario rotary switch disconnectors from to A are suitable for onload making and breaking

More information

Series 8146/5-V37 and Series 8150/5-V37

Series 8146/5-V37 and Series 8150/5-V37 www.stahl.de > Clear assignment safe technology easy installation > Intelligent structure only one rotary actuator for frequency-controlled drives ) 20 ms leading auxiliary contact for safe motor disconnection

More information

USB-to-Data Highway Plus Cable

USB-to-Data Highway Plus Cable Installation Instructions USB-to-Data Highway Plus Cable Catalog Number 1784-U2DHP Topic Page Important User Information 2 Environment and Enclosure 3 Install the Cable 5 Configure the DH+ Node Address

More information

Three-phase monitoring relay CM-PVE

Three-phase monitoring relay CM-PVE Data sheet Three-phase monitoring relay CM-PE The three-phase monitoring relay CM-PE monitors the phase parameter phase failure as well as over- and undervoltage in three-phase mains. 2CDC 251 006 S0012

More information

>PR ONE CAM SWITCH SERIES. A selection of standard switch configurations ready for your requirements. Our commitment makes the difference >

>PR ONE CAM SWITCH SERIES. A selection of standard switch configurations ready for your requirements. Our commitment makes the difference > >R ONE CAM SWITCH SERIES A selection of standard switch configurations ready for your requirements Our commitment makes the difference > R ONE cam switch Series A selection of standard switch functions

More information

Bulletin 1489 Circuit Breakers. Selection Guide

Bulletin 1489 Circuit Breakers. Selection Guide Bulletin 1489 s Selection Guide Bulletin 1489-A Overview/Description Bulletin 1489-A s Energy-limiting design protects downstream components better than conventional breakers during short circuits Field-mountable

More information

SIRCOVER. Manual changeover switches from 125 to 3200 A. Changeover switches. Function. Advantages. The solution for.

SIRCOVER. Manual changeover switches from 125 to 3200 A. Changeover switches. Function. Advantages. The solution for. The solution for Changeover switches svr_099_b_1_cat > Manufacturing industry. > Power distribution. 3200 Strong points svr_059_a_1_cat > complete range. > Easy connections. > Stable positions. > mproved

More information

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2... Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast

More information

LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 65 A - 220 V AC coil

LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 65 A - 220 V AC coil Product data sheet Characteristics LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 -

More information

Application Technique. Safety Function: Magnetic Door Switch Monitoring

Application Technique. Safety Function: Magnetic Door Switch Monitoring Application Technique Safety Function: Magnetic Door Switch Monitoring Products: MC1 Magnetically-coded Door Switch, Guardmaster Dual-input Safety Relay Safety Rating: CAT. 3, PLd to EN ISO 13849-1: 2008

More information

Electronic timer CT-VWE Impulse-ON with 1 c/o (SPDT) contact

Electronic timer CT-VWE Impulse-ON with 1 c/o (SPDT) contact Data sheet Electronic timer CT-VWE Impulse-ON with 1 c/o (SPDT) contact The CT-VWE is an electronic time relay with Impulse-ON function. It is from the CT-E range. The CT-E range is the economic range

More information

Technical Data and Specifications. Table 12-153. UL 489 Interrupting Capacity Ratings. Number of Poles 2, 3 2, 3, 4 2, 3, 4 2, 3, 4.

Technical Data and Specifications. Table 12-153. UL 489 Interrupting Capacity Ratings. Number of Poles 2, 3 2, 3, 4 2, 3, 4 2, 3, 4. May 8 Typical Circuit Product Description All Eaton s Cutler-Hammer Circuit s are HACR rated. circuit breakers are available as individual components (Frame, Trip Unit, Terminals), or factory assembled

More information

Application Switchgear for industrial and commercial applications. U e V AC 230/400. 48 (per pole)

Application Switchgear for industrial and commercial applications. U e V AC 230/400. 48 (per pole) Overcurrentswitch,6A,2p,D-Char,AC Partno. FAZ-D6/2 Articleno. 278777 CatalogNo. FAZ-D6/2 Similar to illustration Deliveryprogramme Basic function Miniature circuit breakers Pole 2 pole Tripping characteristic

More information

Technical catalogue. Modular DIN rail components Installation contactors

Technical catalogue. Modular DIN rail components Installation contactors Technical catalogue Modular DIN rail components Installation contactors Installation Contactors Overview... ESB Installation Contactors 0 A / AC-/AC-7a ESB0...4 4 A / AC-/AC-7a ESB4...5 40 A / AC-/AC-7a

More information

Catalog. Modular DIN rail components Installation contactors

Catalog. Modular DIN rail components Installation contactors Catalog Modular DIN rail components Installation contactors 0 CDC00C00 Installation contactors Benefits and features Overview Ordering details ESB installation contactors ESB0 ESB ESB0 ESB 7 EN installation

More information

SEZ220. Signal Converter. Synco 200. With preprogrammed standard applications Freely programmable Menu-driven operation. Use

SEZ220. Signal Converter. Synco 200. With preprogrammed standard applications Freely programmable Menu-driven operation. Use s 5 146 Synco 200 Signal Converter SEZ220 With preprogrammed standard applications Freely programmable enu-driven operation Use The signal converter is for use in HVAC plant to provide minimum / maximum

More information

Safety technique. Emergency stop module BO 5988 safemaster

Safety technique. Emergency stop module BO 5988 safemaster Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1

More information

Table HP 1: AMPERE RATINGS & HORSEPOWER RATING 1 PHASE. Table HP 2: AMPERE RATING & HORSEPOWER RATING 3 PHASE & 2 PHASE - 4 WIRE

Table HP 1: AMPERE RATINGS & HORSEPOWER RATING 1 PHASE. Table HP 2: AMPERE RATING & HORSEPOWER RATING 3 PHASE & 2 PHASE - 4 WIRE Table HP 1: AMPERE RATINGS & HORSEPOWER RATING 1 PHASE FLA & LRC CONVERTED TO TABLE HORSEPOWER (SEE NOTE #2) USE FLA & LRC RATINGS WHERE NO HP RATING IS GIVEN NOMINAL CIRCUIT VOLTAGE V-EA MOTOR MOTOR 110-120

More information

ABB LV Product Overview Capabilities Guide

ABB LV Product Overview Capabilities Guide ABB LV Product Overview Capabilities Guide Breakers and Switches Disconnects ABB has a wide portfolio of low voltage switches that include: fusible, non-fusible, change-over, enclosed and cam switches

More information

PRODUCT GUIDE. SL Medium Voltage IEC Vacuum Contactors

PRODUCT GUIDE. SL Medium Voltage IEC Vacuum Contactors PRODUCT GUIDE SL Medium Voltage IEC Vacuum Contactors Table of Contents 1 Overview Introduction....................................................2 Features........................................................2

More information

ABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application.

ABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application. 1SR 430 824 F9300 Features Monitoring of three-phase mains for phase sequence and failure Powered by the measuring circuit 2 c/o (SPDT) contacts 1 LED for status indication Approvals R: yellow LED - relay

More information

Terminal Blocks & Power Distribution Terminal Blocks. Make your connection

Terminal Blocks & Power Distribution Terminal Blocks. Make your connection Terminal Blocks & Power Distribution Terminal Blocks Make your connection IEC TERMINAL BLOCKS PRODUCT SPOTLIGHT Leading the industry in efficiency and productivity, the Bulletin 1492 family of IEC terminal

More information

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com Product description Wide rated operational voltage 208 600 V AC Wide rated control supply voltage 100 250 V, 50/60 Hz Rated operational current 18 to 370 A Wide ambient temperature range, -25 to +60 ºC

More information

DRM75A 230V 20/100A DIN rail single phase two wire energy meter

DRM75A 230V 20/100A DIN rail single phase two wire energy meter DRM75A 230V 20/100A DIN rail single phase two wire energy meter 1.1 Safety instruction 1.2 Foreword 1.3 Performance criteria 1.4 Specifications 1.5 Basic errors 1.6 Description 1.7 Dimensions 1.8 Installation

More information

Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.

Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications. Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description

More information

ABB i-bus KNX Switch Actuator, x-fold, 16 A, MDRC SA/S x.16.2.1, 2CDG1101xxR0011

ABB i-bus KNX Switch Actuator, x-fold, 16 A, MDRC SA/S x.16.2.1, 2CDG1101xxR0011 Technical Data 2CDC505051D0205 ABB i-bus KNX Product description Switch Actuators SA/S x.16.2.1, 16 A are modular installation devices in ProM design for installation in the distribution board. They are

More information

TX OPEN RS232/485 module

TX OPEN RS232/485 module s 8 185 8185P01 TX-I/O ; DESIGO OPEN TX OPEN RS/485 module for integrating third-party systems and devices to DESIGO (V4 or higher) TXI1.OPEN Platform to integrate third-party systems and devices to the

More information

Uncompromising safety and comfort The next generation of miniature circuit breakers MCB S 200/S 200 M

Uncompromising safety and comfort The next generation of miniature circuit breakers MCB S 200/S 200 M Uncompromising safety and comfort The next generation of miniature circuit breakers MCB S 200/S 200 M The details make the difference MCB S 200/S 200 M A range designed to ensure efficiency and protection

More information

PR ONE cam switch Series Ready switch configurations matching your requirements. Our commitment makes the difference >

PR ONE cam switch Series Ready switch configurations matching your requirements. Our commitment makes the difference > R ONE cam switch Series Ready switch configurations matching your requirements Our commitment makes the difference R ONE cam switch Series A selection of standard switching programmes and mounting forms

More information

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of

More information

RM4TR32 three-phase network control relay RM4-T - range V

RM4TR32 three-phase network control relay RM4-T - range V Characteristics three-phase network control relay RM4-T - range 300..430 V Complementary [Us] rated supply voltage Control threshold undervoltage Control threshold overvoltage Output contacts Main Range

More information

Absolute Rotary Encoder E6CP

Absolute Rotary Encoder E6CP Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the

More information

at 240 V and 100 ka at 480 V.

at 240 V and 100 ka at 480 V. Data Bulletin 0611DB0402R01/10 01/2010 Cedar Rapids, IA USA Replaces 0611DB0401R3/08 PowerPact Circuit Breakers for Control Panel Disconnects Class 0611 Retain for future use. Introduction Certifications

More information

Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet

Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order

More information

5SV Residual Current Protective Devices

5SV Residual Current Protective Devices s Siemens AG 2013 SENTRON 5SV Residual Current Protective Devices New portfolio for reliable personnel, material and fire protection Safe protection against residual currents Residual current protective

More information

Dimensions, Inches (mm) No. of Poles Width Height Depth 2, 3 8.25 (210) 16 (407) 5.5 (140) 4 11.125 (283) 16 (407) 5.5 (140)

Dimensions, Inches (mm) No. of Poles Width Height Depth 2, 3 8.25 (210) 16 (407) 5.5 (140) 4 11.125 (283) 16 (407) 5.5 (140) 9-10N Supersedes Selection Data 9-10N, pages, 1-, dated dated March March 1995 1995 Mailed to: E, D, C/9-100A, 31-A, INTERRUPTING CAPACITY RATINGS IEC 947- Interrupting Capacity s➀ Interrupting Capacity

More information

Actuator-Sensor-Interface

Actuator-Sensor-Interface Selection and ordering data Design Order No. Price Pack 3RX9 307-0AA00 3RX9 307-1AA00 4FD5 213-0AA10-1A 3RX9 305-1AA00 3RX9 306-1AA00 Single output IP 65 current 2.4 A Rated input voltage DC 24 V current

More information

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application 33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection

More information

Manual Switching Devices:

Manual Switching Devices: : Control, Load or Fusible Disconnect Switches Which is Best For Your Application? Application Data Typical Control Switch Typical Load Break Switch Typical Fusible Disconnect Switch Introduction A variety

More information

SB 175 Connectors - up to 280 Amps

SB 175 Connectors - up to 280 Amps Connectors - up to 280 Amps 2 Pole Wires sizes from #12 (3.3 mm²) to 1/0 (50 mm²) fit in the second to largest connector in the SB series. The 3 pole adds an additional position for power or grounding.

More information

HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000.

HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000. NTG-3000 Transducer Data Sheet Document Version 2.8 Page 1 of 10 Versions / Revisions: Document Creation Author Description version date 2.0 2012-07-25 P. Compensis First official version 2.1 2012-08-24

More information