PRESTOTIG DC PRESTO ARC. Portable DC TIG and MMA covered electrode welding installations.

Transcription

1 PRESTOTIG DC PRESTO ARC Portable DC TIG and MMA covered electrode welding installations.

2 PRESTO - PRESTO 6 Covered electrode arc welding Welding is our business. covered electrode welding with PRESTO installations, TIG welding with PRESTOPAC and PRESTOTIG installations, AC/DC TIG welding with the 6 AC MODULE and PRESTOTIG AC/DC 0 V single-phase or 400 V three-phase. The PRESTO range gives you the benefit of our experience, offering you unrivalled performance in compact generators. Designed for on-site service and repair operations, these covered electrode welding sets offer welders: simple connection to 0 V; single phase supply; a lightweight pack; upgradablility with PRESTOPLUS. PRESTO 0 V singlephase PRESTO 6 0 V singlephase rutile, basic or stainless up to. mm Ø; built-in arc dynamics control; built-in hot start and anti-sticking; TIG operation (valve torch). rutile, basic, stainless and cellulosed electrodes up to 4 mm Ø; exceptionally smooth fusion; adjustable hot start; adjustable arc dynamics control; TIG operation (valve torch) and Pac system arc striking. PRESTO Plus control panel PRESTO 6 control panel Technical specifications -8 continuous welding current adjustment; on/off switch; thermal trip. 4 hot start/tig selector; continuous welding current adjustment; thermal trip and power indicators; on/off switch; arc dynamics control PRESTO PRESTO 6 0 V ± 0% single-phase 0 V ± 0% single-phase 0-60 Hz 0-60 Hz 7 A A V 8 V to 0 A to 60 A 0 A (at 4 %) 60 A 0 A (0 A at 0 C) 40 A (60 A at 0 C) 0 A (0 A at 0 C) 0 A (40 A at 0 C) IP IP EN EN x 70 x 0 mm 470 x 70 x 40 mm 7 kg kg

3 PRESTO 0 Powerful, complete, rugged Powerful, complete, rugged, lightweight, for all covered electrode welding applications: cellulosed, basic... PRESTO V three-phase Optimized melting of all electrodes up to mm Ø: no lack of fusion or arc discontinuities; easy arc striking with all electrodes; lightweight: 4 kg; ergonomically designed, the set for extreme conditions; fully rectified current affording exceptionally smooth melting; low current draw. Options 0-0 m remote controller. Cat. N : Digital read out with post-display of welding current. Cat. N : PRESTO 0 control panel Primary PRESTO 0 Power supply voltage 400 V ± 0% three-phase Frequency 0-60 Hz Primary consumption at max. current 4. A Secondary Open circuit voltage 7 V Welding current to 0 A Duty current at % 0 A at 40 C at 60% 00 A (0 A at 0 C) at 00% 80 A (00 A at 0 C) Protection IP Standards EN Dimensions (L x w x H) 90 x x 40 mm Weight (net) 4 kg thermal trip indicator; voltage fail indicator; power indicator; on/off switch; strike dynamics; arc dynamics control; current adjustment; digital read out (optional). 70-

4 PRESTOPAC 6 - PRESTOTIG 6 DC TIG welding for stainless and other steels PRESTOPAC 6 0 V single-phase 79-0 welds light alloy with the addition of the 6 AC MODULE. Fast maintenance and repairs. The essential tool for on-site installation and repairs. no-hf TIG arc striking, electronically controlled, the PAC system ensures tungsten-free arc striking avoiding all risk of electrical disturbances; two TIG welding cycles: - one fast, simple tacking cycle; - one cycle with arc fading; post-gas adjustable from 0 to 0 seconds; extremely smooth melting of covered electrodes up to Ø 4 mm diameter; TACK WELDING CYCLE Pre-gas WELDING CYCLE WITH ARC FADING Pre-gas PAC system arc striking device Contact Soudage Pre-gas Welding Evanouissement Post-gas Post-gas Arc establishement Welding Arc fading and Post-gas PRESTOPAC 6 control panel 4 4 fast selection : ARC/TIG tack/ TIG with arc fading, continuous adjustment of welding current, thermal trip, on/off switch, post-gas adjustment Technical specifications PRESTOPAC 6 Primary 0 V ± 0% single phase Power supply 0-60 Hz Frequency 0 A Max. intensity Secondary 8 V Open circuit voltage à 60 A Welding current 60 A Duty current at % 0 A at 40 C at 60% 00 A at 00% IP Protection EN Standards 470 x 70 x 40 mm Dimensions (L x w x H) kg Weight (net)

5 PRESTOTIG 6 0 V single-phase H.F. arc striking GAS - POWER COMPACT TORCH COUPLING electrodes up to 4 mm Ø; extremely smooth melting of covered electrodes; striking dynamics control; arc dynamics control. Excellent for TIG welding and covered electrode welding, this generator combines mobility and versatility with reliability and performance, and is very easyto use. TIG DC welding: high frequency TIG arc striking; optional PAC system arc striking; S or 4S cycle; adjustable fade and post-gas; adjustable pre-gas; clutch-operated cooling. ARC welding: all rutile, basic and special PRESTOTIG 6 control panel PRESTOTIG 6 0 V ± 0% single-phase 0-60 Hz A V à 60 A 60 A 0 A 00 A IP EN x 70 x 40 mm 4 kg ARC/TIG S/4S HF/PAC selector; arc fading control (TIG) arc dynamics (ARC); safety indicator; operation indicator; post-gas control (TIG) striking dynamics control (ARC); on/off switch; current adjustment.

6 PRESTOTIG 80-0 (with pulsed TIG option) PRESTOTIG 80 From workshop to site, unrivalled performance. Very high precision TIG welding (with pulsed TIG option) for quality work. A simple efficient generator. PRESTOTIG 80 is a 0 V 0-60 Hz three-phase inverter. It weighs 8 kg. 0 V single-phase H.F. arc striking PRESTOTIG V three-phase H.F. arc striking Simple and rugged, it features a full TIG cycle (with pulsed TIG option) giving you extraordinary performance. PRESTOTIG 0 is a 400 V 0-60 Hz three-phase inverter. It weighs 8 kg. GAS - POWER COMPACT TORCH COUPLING GAS - POWER COMPACT TORCH COUPLING Simple and comprehensive control panel Parameter storage function : can store 0 welding cycles (PRESTOTIG 0 only). Parameter read out module. When welding, displays current and voltage. Power on indicator. On/off button. Welding parameter print function. Can be connected to any serial interface printer. Prints all welding cycle parameters (PRESTOTIG 0 only). Welding selection TIG HF arc striking, TIG PAC SYSTEM arc striking covered electrode. Parameter adjustment. Welding selection stage/4 stage/spot. Parameter selection. 79-8

7 PRESTOTIG 0 Water version Welding parameter programming (data displayed on digital read out): pre-gas from 0 to 0 seconds; pre-weld from A to welding current maximum, adjustable from 0 to 0 seconds; rise time from 0 to 0 seconds; maximum welding current from to 80 A or 0 A; spot time from 0 to seconds; fading time from 0 to 0 seconds; final current from A to welding current; maximum, adjustable from 0 to 0 seconds; post-gas from 0 to seconds. PRESTOTIG 0 Water version. Solutions ideal for your needs with the water package configuration: PRESTOTIG 0 and PRESTOCOOL cooling unit. User configuration Parameter print out. A serial printer can be connected to PRESTOTIG 0 to take an extremely accurate reading of all the welding parameters used for construction parts. Now even the most stringent quality standards can be met with assurance Remote controls: PRESTOTIG 80 and Pulsed remote controller. Ref. : Primary PRESTOTIG 80 PRESTOTIG 0 Power supply 0 V ± 0% single-phase 400 V ± 0% three-phase Frequency 0-60 Hz 0-60 Hz Max. intensity 6 A A Secondary Open circuit voltage 9 V 08 V Welding current to 80 A to 0 A Duty current at % - 0 A at 40 C at 60% 60 A 00 A at 00% 4 A 80 A Protection IP IP Standards EN EN Dimensions (L x w x H) x x 9 mm 60 x 4 x 40 mm Weight (net) 8 kg 8 kg Technical specifications Universal remote controller. Ref. : Foot-operated remote controller. Ref. :

8 PRESTOPLUS Accessories to make the PRESTO range even more powerful and more practical. PRESTOMOVE trolley For moving PRESTOTIG 0, PRESTOTIG 00 AC/DC and PRESTOTIG 00 AC/DC installations without strain. The PRESTOMOVE trolley adds safety and efficiency to your welding jobs. Gas cylinder (B to B0) Storage compatments Cable winder Torch carrier Power supply Trolley for frequently moving PRESTO and PRESTOTIG 0 units. ROLLERTIG installation Cat. N Ready-to-weld installation comprising: PRESTOTIG 6, 8 m torch with regulator, ARCAL B gas cylinder, PRESTOMOVE trolley, kg NERTALINOX CN 8.0. filler metal TIG torch 79-6 Earth cable Torch cooling unit Large wheels for easy handling 67- Welding light alloys PRESTOMOVE trolley You can carry your generator. But what about the rest? Under kg complete - ready to weld! The B cylinder and the PRESTOMOVE trolley combine to offer you a truly mobile compact system Can be adapted to PRESTO, PRESTOPAC and PRESTOTIG 6. MODULE 6 AC Combine MODULE 6 AC with a PRESTO or PRESTOPAC, and your installation becomes a powerful solution for welding lights alloys. Control panel Balance adjustment for improved wetting for greater penetration. Welding frequency (00 Hz) gives a remarkably rigid arc (protected from HF). Storage compartments Cable winder Gas cylinder (B), m Filler metal stock Large wheels for easy handling Power supply PRESTO shoulder strap can be adapted to all PRESTO units under 6 kg For welding aluminium with the AC/DC installation, refer to manual PRESTOTIG 00 AC/DC PRESTOTIG 00 AC/DC Portables AC/DC TIG and ARC welding installations.

9 Ordering information : PRESTO PRESTO 6 PRESTO 0 Standard offer code UB 0 UB 0 6 UB 0 0 Basic reference code comprising: 00-8 comprising: comprising: m earth cable, m earth cable, m earth cable, earth clamp earth clamp and earth clamp and STUBBY and electrode holder clamp K 00 electrode holder clamp electrode holder clamp Package with: basic reference code with PROTIG 0-V m with PROTIG 0-V m and m TIG torch and adapter Package with: basic reference code - with PROTIG 0-V 8 m and 8 m TIG torch and adapter Package with: basic reference code, with PROTIG 0-V m with PROTIG 0-V m m TIG torch and regulator adapter and EUROSAF regulator and regulator - Package with: basic reference code, - with PROTIG 0-V 8 m 8 m TIG torch adapter and EUROSAF regulator and regulator - Package TIG DC PRESTOCOOL cooling unit PRESTOPLUS Digital read-out Remote control Accessories kit PRESTOMOVE trolley PRESTOMOVE trolley Trolley Shoulder strap MODULE 6 AC Pac arc striking - Torches PROTIG PRESTO Amps m 8 m Maintenance torches generator harness harness box 6-0 VR S V PRESTO Plus PRESTO 6* *requires adapter EB 0-EBCJ PRESTOPAC CJ RL CCB 6-0-RL-CCB PRESTOTIG RL-CCB PRESTOTIG RL-CCB PRESTOTIG W-RL-CCB PRESTOTIG PRESTOCOOL

10 PRESTOPAC 6 PRESTOTIG 6 PRESTOTIG 80 PRESTOTIG 0 UC 0 6 UC UC UC comprising: comprising: comprising: comprising: m earth cable, m earth cable, m earth cable m earth cable earth clamp and earth clamp and and earth clamp and earth clamp K 00 electrode holder clamp K 00 electrode holder clamp with PROTIG 0-EB-CJ m with PROTIG 0-RL-CCB m with PROTIG 0-RL-CCB m avec PROTIG 40-RL-CCB m and maintenance box et boîte de maintenance with PROTIG 0-EB-CJ 8 m with PROTIG 0-RL-CCB 8 m with PROTIG 0-EB-CJ m with PROTIG 0-RL-CCB m with PROTIG 0-RL-CCB m with PROTIG 40-RL-CCB m and regulator and regulator regulator and maintenance box and maintenance box with PROTIG 0-EB-CJ 8 m with PROTIG 0-RL-CCB 8 m - - and regulator and regulator Provide: power supply kit fixing kit PAC arc striking Environment accessories EUROSAF regulator-flowmeter Cat. N : A screw operated STUBBYelectrode Ø.0 mm Cat. N : PROLUX welding helmet Cat. N : : tint adjustable from 9 to by continuous external knob adjustment, darkening controlled by arc light, 0. ms reaction time, 98 x 40 mm field of view, standards: 096 CE 94/EN 79, spare filter Cat. N : , outer visor (x0) Cat. N : , inner visor (x0) Cat. N : , head clamp Cat. N : , maintenance kit Cat. N : SAF -, RUE D EPLUCHES - SAINT-OUEN L AUMÔNE 9 CERGY-PONTOISE - CEDEX FRANCE TEL. : FAX : SAF WELDING PRODUCTS LTD - LOW MARCH - LONDON ROAD DAVENTRY - NORTHANTS NN 4SD TEL. : TELEFAX : E mail : info.saf@airliquide.com Internet : NERTAL electrodes Steel - stainless steel - DC welding 0 mm long 7 mm long % thoriated tungst. Cerium tungst. % thoriated tungst. Red end Grey end Red end Ø Current (A) N N N DISTRIBUTORS STAMP La SAF se réserve le droit de modifier ses appareils sans préavis. Les illustrations, descriptions et caractéristiques sont données à titre indicatif et ne peuvent engager le constructeur. SAF S 0 Ed. QB : 684 Photos SAF : S. Rosello - G. Rocskay