OPTIMAG. MIG/MAG welding equipment with OPTI system. Simplicity and productivity
|
|
- Pamela Parrish
- 7 years ago
- Views:
Transcription
1 OPTIMAG MIG/MAG welding equipment with OPTI system. Simplicity and productivity
2 OPTIMAG range and opti system MIG/MAG welding equipment designed for heavy-duty quality work. Its 6 thyristors bridge provides a continuous stable arc adjustment, it is completed by a 4-rollers separated wire-feeder regulated by tachometer. Its OPTI system adjustment brings an extreme simplicity through a user-friendly interface and pre-adjusted programs. Simplicity of the adjustment of the OPTI system: OPTI system is a synergic mode that access to pre-recorded parameters and optimizes significantly the welding performances. Once the user sets: WELDING Gas and material Welding cycle Wire diameter 1 T/4T welding cycle Crater filler cycle Gas selection 4 Solid or cored wire selection Display for: current thickness wire speed 6 Display for voltage Selection for the display Material selection Wire diameter selection On and warning lamps On/off switch Increasing the productivity: Maximum power at 60 % duty cycle (40 C). Rapid access to the correct welding parameters. Complete welding cycle with Hot Start and crater filler. Optional water cooled configuration. Easy to use with fast parameter changes using the OPTI system. 0-00
3 Arc striking: Variable striking voltage Arc extinction system Anti balling system No need to cut the wire before restarting Ideal for maintenance and reparation applications. Arc stability: Continuous adjustment and regulation of the welding parameters A.N.D: Arc Non Disruption, eliminates disruption of the arc, for uniform melting with minimun spatters Optimisation: Welding performance Can be used with CO and mixed gas Optimum user safety: Detector for absence of a phase on the primary supply Configured: For automated applications Fan: Disconnectable Separate wire feeder: 4 rollers, light, and compact (manhole) with fast wire feed Wire feeding regulation Air cooled and water cooled versions Easy to maintain: No electronics in the wire feeder unit. Easy access to all internal parts. Simple electronic card for all fonctions. Autodiagnosis: a rapid check up verifies that the main components (fan,cooling unit,etc ) are working properly. Detector for the absence of a phase on the primary power supply. 3
4 Technical specifications Primary Power supply - 3 phases Frequency OPTIMAG 400 S (W) OPTIMAG 400 S (W) MV OPTIMAG 00 S (W) 30 / 400 V 0 / 30 / 40 / 380 / 400 / 41 / 400 V 0-60 Hz 0 / 30 / 40 / 380 / 400 / 41 / 440 V Maximum primary consumption 1 / 9 A 3 / 1 / 48 / 31 / 9 / 8 / 6 A 81 / 78 / 74 / 47 / 4 / 43 / 41 A Secondary Open circuit voltage max. 48 V 48 V 61 V Adjustment range A A 40-0 A Duty cycle at 40 C General at 40 % 400 A 400 A - at 60 % 30 A 30 A 0 A at 100 % 70 A 70 A 370 A Standard EN / EN Protection index IP 3 Insulation class Air cooling Controlled fan Dimensions (H x W x D) with feeder x 30 x 1 01 mm x 30 x 1 01 mm x 710 x 1 10 mm Weight 137 kg 143 kg 18 kg Wire feeder Welding wires Wire feed rate Steel, Stainless steel Flux-cored Aluminium H 0.8 to 1.6 mm 1.0 to.4 mm 1.0 to.4 mm 1 to 0 m/min. Numbers of rollers 4 Dimensions (H x W x D) Weight Cooler unit Power supply 1 phase Max. pressure Max. flow Dimensions (H x W x D) Weight 10 x 330 x 610 mm m 7 kg air - 9 kg water 10 m 34 kg air - 38 kg water 1 m 41 kg air - 47 kg water 30 V - 0/60 Hz 4 bars 4 l/min. 19 x 440 x 700 mm 19 kg 4
5 Ordering information Power source delivered with a primary cable m an earth cable m with clamp a gas hose 3 m Cat. no OPTIMAG 400 S (W) MV W OPTIMAG 400 S (W) W OPTIMAG 400 S pack* W OPTIMAG 400 S W pack* W OPTIMAG 00 S (W) W OPTIMAG 00 S W pack* W Cooling units COOLER II W FREEZCOOL W Wire feeder with harness The wire feeder is delivered with: rollers and wire guides for mm for steel and stainless steel using wire feeder trolley with spool cover DV44i - D37 DV44i - D37 (W) Options * Power source + feeder + pressure regulator for French market. m W m W m W m W m W m W Remote control unit W OPTIBOX 100 W Pivot support W Slinging arm W Torches 3 m 4 m m PROMIG NG 341 W W W PROMIG NG 341 W W W W PROMIG NG 441 W W W PROMIG NG 441 W W W W
6 Contacts BELGIUM AIR LIQUIDE WELDING BELGIUM SA Z.I. West Grijpen - Grijpenlaan TIENEN Tel.: Fax: CHINA SAF SHANGHAI REP. OFF. Rm. 7. Pine City Hotel 777 Zhao Jia Bang Lu - SHANGHAI 0003 Tel.: Fax: CZECH REPUBLIC AIR LIQUIDE WELDING CZ S.R.O. Podnikatelská 6 - Areál SVUM PRAHA 9 - Bûchovice Tel.: Fax: FRANCE AIR LIQUIDE WELDING FRANCE 13, rue d Épluches - BP 7004 Saint-Ouen l'aumône 931 CERGY PONTOISE Cedex Tel.: Fax: HUNGARY AIR LIQUIDE WELDING HUNGARY - Kft Krisztina krt. 39/b - H-1013 Budapest Tel.: Fax: ITALY AIR LIQUIDE WELDING ITALY Via Torricelli 1/A VERONA Tel.: Fax: LUXEMBOURG AIR LIQUIDE WELDING LUXEMBOURG S.A. rue de la Déportation - BP L-141 LUXEMBOURG Tel.: Fax: MALAYSIA SAF-OERLIKON MALAYSIA SDN BHD No 10, Jalan TPP /1 - Taman Perindustrian Puchong PUCHONG, SELANGOR Tel.: Fax: NETHERLANDS AIR LIQUIDE WELDING NETHERLANDS Rudonk 6 B - NL 484 AJ BREDA Tel.: Fax: POLAND AIR LIQUIDE WELDING POLSKA - SP. Z.o.o UL. Porcelanowa KATOWICE Tel.: Fax: PORTUGAL AIR LIQUIDE SOLDADURA LDA Rua Dr. António Loureiro Borges, 4- Arquiparque Miraflores ALGÉS Tel: Fax: ROMANIA DUCTIL Aleea Industriilor Nr BUZAU Tel.: Fax: RUSSIA AIR LIQUIDE WELDING 17 Vorontsovskaya Str MOSCOW Tel.: Fax: SLOVAKIA AIR LIQUIDE WELDING CENTRAL EUROPE S.R.O. Prazska NITRA Tel.: Fax: THAILAND AIR LIQUIDE WELDING THAILAND Co Ltd 40 Moo 6 - Ramindra Road Km. 9. KHANNAYAO, BANGKOK 1030 Tel.: Fax: U.A.E. AIR LIQUIDE WELDING MIDDLE EAST FZE Jebel Ali free zone warehouse No. FZS1AH0 P.O. BOX Jebel Ali - DUBAI Tel.: +971(0) Fax: +971(0) UKRAINE AIR LIQUIDE WELDING UKRAINE, Llc. 1 rue Proskura - bureau 106A KHARKOV Tel.: Fax: Air Liquide Welding France reserves the right to carry out modifications to its machinery without prior notice. The manufacturer accepts no liability for illustrations, descriptions and characteristics, which are for information only. Contacts for other countries ALW Export Department Italy Via Torricelli1/A 3713 Verona - Italy Tel: Fax: export.alwitaly@airliquide.com ALW Export Department France 13, rue d'epluches BP 7004 Saint Ouen l'aumône 931 Cergy-Pontoise Cedex - France Tel: Fax: export.alwfrance@airliquide.com Founded in 190, Air Liquide is the world leader in industrial and medical gases and related services. The company has offices in 7 countries and employs a work force of 40,000. Drawing on constantly renewed technologies, Air Liquide develops groundbreaking solutions used in making countless everyday products and in helping to preserve life. ALWF - W Compliant New Offer QB: S 0 - Ed. Photos: JSR
SAFMIG BLX. Digital controlled MIG/MAG step machines. Complete range of intelligent step controlled semi-automatic equipment. www.saf-fro.
SAFMIG BLX Digital controlled MIG/MAG step machines. Complete range of intelligent step controlled semi-automatic equipment. 000-84 006-36 www.saf-fro.com SAFMIG BLX: over 40 years of excellent servic
More informationPRESTOTIG PFC / PRO Professional range
PRESTOTIG PFC / PRO Professional range Portable TIG DC welding installations www.saf-fro.com PRESTOTIG DC PFC / PRO Professional range PRESTOTIG DC Professional offers leading technology in TIG DC welding
More informationPRESTOTIG 240 & 310 AC/DC
PRESTOTIG 20 & 310 AC/DC TIG AC/DC machine for welding specialists www.saf-fro.com PRESTOTIG AC/DC PRESTOTIG AC/DC machines are designed to meet the expectations of the most demanding welders. Optimum
More informationCITOTIG II DC Industrial range
CITOTIG II DC Industrial range The best of TIG welding using inverter technology for the most demanding welders. www.oerlikon-welding.com CITOTIG II DC Industrial range Single or three-phase portable inverters
More informationCITOTIG 240 & 310 AC/DC
CITOTIG 20 & 310 AC/DC TIG AC/DC machine for highly demanding welding specialists www.oerlikon-welding.com CITOTIG AC/DC CITOTIG AC/DC machines are designed to meet the expectations of the most demanding
More informationEN 1090. CE marking made easy. www.oerlikon-welding.com
EN 1090 CE marking made easy www.oerlikon-welding.com EN 1090 EN 1090 package. More than 80% of applications covered: Get more information on www.airliquidewelding.com - Section Our services - Chapter
More informationPROTIG NG. Manual TIG Welding Torches. www.saf-fro.com
NG Manual TIG Welding Torches www.saf-fro.com New range Round handle series (RL), designed for worksite applications. Easy to handle, and easy to maintain. These classic round handled TIG torches have
More informationINTELLIGENT ENERGY ICHARGER & IDCHARGER
INTELLIGENT ENERGY ICHARGER & IDCHARGER www.cemont.com MICROPROCESSOR UNIVERSAL AUTOMATIC INTELLIGENT BATTERY CHARGERS WITH INVERTER TECHNOLOGY SAFE Will not damage your car s onboard electronics FAST
More informationCRISTAL F100 - F 206. The future of welding is clear. A new generation of flux cored wires. www.oerlikon-welding.com 2006-200 RL00537R
CRISTAL F100 - F 206 A new generation of flux cored wires The future of welding is clear RL00537R 2006-200 www.oerlikon-welding.com CRISTAL F: a new generation of flux cored wires 3534-053 Our objective
More informationCRISTAL F 119 - F 208
CRISTAL F 119 - F 208 A new generation of seamless flux cored wires The future of welding is clear RL00537R 2006-204 www.oerlikon-welding.com CRISTAL F, a new generation of flux cored wires 3534-053 Our
More informationElectron Beam welding process
Electron Beam welding process www.airliquidewelding.com Electron beam welding general presentation The principle of electron beam welding is relatively simple: electrons are accelerated by a high difference
More informationPlasma range PRESTOJET / PLASMAJET
Plasma range PRESTOJET / PLASMAJET A complete range of installations for manual plasma cutting and gouging 008-0 www.saf-fro.com The plasma expert 00-090 00-00 00-89 00-0 The plasma process Principles
More informationWST Fume Extraction Torches
WST Fume Extraction Torches for MIG/MAG welding www.airliquidewelding.com If the rivers are kept clean, there will be no need to clean up the oceans. The extraction of welding fumes at source provides
More informationWHAT IS A BATTERY? CAPACITY
www.cemont.com WHAT IS A BATTERY? A battery is a device able to store electrical energy, supplied to it by a direct current generator during charging, in the form of chemical energy. It returns this energy,
More information2350-012. Chapter 3 MIG/MAG welding
250-012 Chapter MIG/MAG welding 2000-489 MIG/MAG welding The transfer of metal Torch Nozzle Contact tip Gaseous protection Molten metal Electrode wire Weld bead MIG/MAG welding overview and selection guide
More informationStrip Weld Overlay. www.oerlikon-welding.com
Strip Weld Overlay www.oerlikon-welding.com OERLIKON Solutions Strip Weld Overlay Introduction................................................................. 2 OERLIKON and Strip Weld Overlay......................................3
More informationSMARTY 160 POWER page 4-5 SMARTY 180 / 220 XL page 4-6 SMARTY TX 250 page 4-7. SMARTY TX 160 Alu page 4-8 SMARTY TX 220 Alu page 4-9
CHAPTER TIG welding Introduction pages - & - WELDING POWER SOURCES DC power sources SMARTY 60 POWER page -5 SMARTY 80 / 0 XL page -6 SMARTY TX 50 page -7 AC/DC power sources SMARTY TX 60 Alu page -8 SMARTY
More informationMTA1 CAN, M1 10Prog CAN, AT1CAN, AT1 CoarseFine CAN, M1, AT1, AT1 CoarseFine, RA 12, RA 23, RA T1, FS 002 CAN, FS 002
GB MTA1 CAN, M1 10Prog CAN, AT1CAN, AT1 CoarseFine CAN, M1, AT1, AT1 CoarseFine, RA 12, RA 23, RA T1, FS 002 CAN, FS 002 Instruction manual 0459 576 101 GB 090129 Valid for serial no. 506 -xxx -xxxx, 719
More informationVarioSynergic 3400 / 4000 / 5000 VarioSynergic 3400-2 / 4000-2 / 5000-2. MIG/MAG welding
VarioSynergic 3400 / 4000 / 5000 VarioSynergic 3400-2 / 4000-2 / 5000-2 MIG/MAG welding A high-calibre machine that s user-friendly, too. GENERAL REMARKS UTILISATION It s got the lot The VarioSynergic
More informationCaddyt A32, A33, A34. Instruction manual
Caddyt A32, A33, A34 Instruction manual 0460 449 174 GB 080513 Valid from program version 1.03 1 INTRODUCTION... 3 1.1 Control panel A32... 3 1.2 Control panel A33... 4 1.3 Control panel A34... 5 2 MMA
More informationSST 2. Soft starting tool 2. Instruction manual
SST 2 Soft starting tool 2 Instruction manual 0740 800 174 090909 Introduction.................................................................... 3 Connections to / from SST 2.....................................................
More informationFastMig M A new breed of industrial workhorse
FastMig M A new breed of industrial workhorse Proven reliability from the top of the welding technology Top welding performance for industrial MIG/MAG welding. Welding machine with various configurations
More informationAccuracy counts! SENSORS WITH ANALOG OUTPUT
Accuracy counts! SENSORS WITH ANALOG OUTPUT OTHER APPLICATIONS: KEY ADVANTAGES: Distance measurement Positioning Profile detection Deformation monitoring Vibration monitoring Process monitoring Detection
More informationCaddy TA33, TA34. Instruction manual
Caddy TA33, TA34 Instruction manual 0460 447 074 GB 091127 Valid from program version 1.03 1 INTRODUCTION................................................... 3 1.1 Control panel.............................................................
More informationAutotransformer TUA 1 Autotransformer TUA 2
GB Autotransformer TUA 1 Autotransformer TUA 2 Instruction manual 0459 302 001 GB 090901 Valid for serial no. 303 1 DIRECTIVE... 3 2SAFETY... 3 3 INTRODUCTION... 4 3.1 Equipment... 4 4 TECHNICAL DATA...
More information2350-011. Chapter 2 TIG welding
350-011 Chapter TIG welding TIG welding TIG welding overview and selection guide Scheme of a manual installation for TIG welding Helmet/mask Protective clothing Filler metal rod Earth clamp Fume extraction
More informationTypical TIG-plasma solutions
Typical -plasma solutions 2228-005 2003-670 Boilers maker solutions 2004-257 1210-064 1210-067 64 3638-008 2008-400 1415-014 2000-169 2003-204 1467-003 2000-343 2000-160 Pipework solutions or plasma welded
More informationSection 2 - TIG welding General information and choice criteria
Section 2 - TIG welding General information and choice criteria 0255-029 2000-173 3551-046 Scheme of a manual installation for TIG welding Filler wire Welding torch Regulator flowmeter Remote control for
More informationTIG INVERTER INSTRUCTION MANUAL
TIG INVERTER INSTRUCTION MANUAL Contents Warning General Description Block Diagram Main Parameters Circuit Diagram Installation and Operation Caution Maintenance Spare Parts List Troubleshooting 3 4 4
More informationKemppi Mastertig MLS 2500 and 3500. Welding Versatility for Professionals
Kemppi Mastertig MLS 2500 and 3500 Welding Versatility for Professionals Kemppi Mastertig MLS 2500 and 3500 Welding Versatility for Professionals The Mastertig MLS 2500 and 3500 offer outstanding TIG performance
More informationSTT -10 WIRE FEEDER. For Surface Tension Transfer TM. Process
STT -10 WIRE FEEDER For Surface Tension Transfer TM Process STT -10 WIRE FEEDER ADVANTAGE LINCOLN The STT-10 does a lot more than just feed wire. This new generation microprocessor controlled wire feeder
More informationThe TransCut 300 plasma cutting system - Plasmacutting with liquid working medium
The TransCut 300 plasma cutting system - Plasmacutting with liquid working medium Speaker Sector Company Street Town Excellent portability with the TransCut 300 plasma cutting system Compact, portable
More informationESAB Swift Arc Transfer TM MAG welding at very high travel speed
ESAB Swift Arc Transfer TM MAG welding at very high travel speed The ultimate high productivity process. STRENGTH THROUGH COOPERATION ESAB Swift Arc Transfer (SAT TM ) ESAB Swift Arc Transfer (SAT TM )
More informationTS 8/75. Open Welding Head for welding of tube to tubesheet joints THE ART OF WELDING. TIG - With or Without Filler Wire, AVC
TS 8/75 TIG - With or Without Filler Wire, AVC Open Welding Head for welding of tube to tubesheet joints THE ART OF WELDING TS 8/75 Advantages More compact: Reduced space and weight More ergonomic: double
More informationGrove RT. Igo and Igo M Range. Many building sites, one solution. Features and benefits. Rough Terrain Crane
Grove RT Features and benefits Igo and Igo M Range Many building sites, one solution Rough Terrain Crane CHARLIEU - France NIELLA TANARO - Italy Concentrated know-how and experience A world leader More
More informationRobot Welding Torch System
T e C H N O L O G y f O R T H e W e L d e R s W O R L d. Robot Welding Torch System W W Robot welding torch system... The universal MIG/MAG-torch system for robot welding: A new interface and cable assembly
More informationSECO-CAPTO TOOLHOLDING FOR MAZAK MACHINES
SECO-CAPTO TOOLHOLDING FOR MAZAK MACHINES OUR EXTENSIVE RANGE Seco Tools are very pleased to launch its first Seco-Capto tool holding catalogue. We have worked in close partnership with Craftsman Tools
More informationLASER CUTTING MACHINE AXEL 4020
LASER CUTTING MACHINE AXEL 4020 A X E L 4 0 2 0 Dynamic Processing A xel 4020 the next generation of high performance Axel systems provides dynamic laser processing of thick and thin materials in sheet
More informationProfessional Retail Services
Micro balance Professional Retail Services Remote Support Anywhere Integrated Highly secure Remote Services Quick. Convenient. Secure. Unlimited Connectivity Powerful remote services for efficient equipment
More informationPortable power source for orbital tube welding
P4 TIG - With or without filler wire Portable power source for orbital tube welding THE ART OF WELDING P4 General characteristics Portable power source for orbital tube welding Compatible with all Polysoude
More informationCERTIFICATE. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Development, production and sales of plastic,
More informationVIROSAF POSISAF. Rotators and positioners for manual and automatic welding applications.
VIROSAF POSISAF Rotators and positioners for manual and automatic welding applications. Rotators and positioners: improved handling means improved welding. SAF positioning equipment adapts to the welding
More informationE-Seminar. Financial Management Internet Business Solution Seminar
E-Seminar Financial Management Internet Business Solution Seminar Financial Management Internet Business Solution Seminar 3 Welcome 4 Objectives 5 Financial Management 6 Financial Management Defined 7
More informationHow To Buy Eclipse Premium
Eclipse Premium HOMOGENEOUS FLOORCOVERING VINYL > Harmonised colour range > Classic non-directional design > PUR reinforced Easy low-cost maintenance > Favourable initial cost > No additional surface treatment
More informationVia dell' Industria, 25-31020 S. Vendemiano (TV) Tel. 0438 470047 Fax. 0438 470100 - www.elettrolab.it e-mail Acquisti@elettrolab.
EDB300 Electronic Digital Ballast 300W DSP controlled Features: Electronic digital ballast suitable for 300W HID lamps Built-in PFC (pf>0.98 90-260 Vac full range). EMI filter inside. Compact shape, low
More informationCNC TURRET PUNCH PRESSES STRIPPIT P-SERIES
CNC TURRET PUNCH PRESSES STRIPPIT P-SERIES S T R I P P I T P - S E R I E S Efficient & Productive L VD Strippit s P-Series CNC turret punch presses offer a high level of efficiency and productivity in
More informationYEAR/MODEL ANNÉE/MODÈLE BODY SHOP WELDING EQUIPMENT
YEAR/MODEL ANNÉE/MODÈLE DATE OF ISSUE DATE EN VIGUEUR BULLETIN NUMBER NUMÉRO DU BULLETIN Body Repair News ALL APRIL 15, 2014 BRN-14-1 BODY SHOP WELDING EQUIPMENT DISCLAIMER: This publication provides details
More informationPiping Systems for Nuclear Power Industry. Prague, October 2011
Piping Systems for Nuclear Power Industry Prague, October 2011 Introduction of the company Leading Czech supplier of piping systems for power engineering 60 years of experience in the field of power industry
More informationCaddy. Tig 1500i Tig 2200i. Instruction manual
GB Caddy Tig 1500i Tig 2200i Instruction manual 0460 443 201 GB 20130412 Valid for serial no. 803-xxx-xxxx to 927-xxx-xxxx - 2 - - 3 - 1 SAFETY... 5 2 INTRODUCTION... 7 2.1 Equipment... 7 2.2 Control panels...
More informationSingle and three phase modular Automatic Transfer Switch from 40 to 160 A
NEW SINGLE PHASE Single and three phase modular Automatic Transfer Switch from 40 to 160 A SWITCH TO INNOVATION SOCOMEC: intelligent changeover systems As a worldwide leading company in changeover power
More informationWelding Alloys Group. TETRA S, TETRA V & TETRA SB Stainless flux cored wires
Welding Alloys Group TETRA S, TETRA V & TETRA SB Stainless flux cored wires Flux cored wires range Welding Alloys Group offer the world s largest range of flux and metal cored welding wires for low, medium,
More informationSafety Relay Units. G9SR family. Diagnosis with LEDs Selectable operating modes and times Increased extension possibilities. industrial.omron.
Safety Relay Units G9SR family Diagnosis with LEDs Selectable operating modes and times Increased extension possibilities industrial.omron.eu/g9sr ... A complete standalone Safety Relay Unit family - G9SR
More informationAristotig 255 AC/DC DTE 255. Instruction manual
Aristotig 255 AC/DC DTE 255 Instruction manual 0457 784 201 GB 031110 Valid for serial no. 810 to 246 1 DIRECTIVE........................................................ 3 2 SAFETY...........................................................
More informationPlasma and TIG processes. Automatic welding applications
Plasma and TIG processes. Automatic welding applications Performance and high productivity in boiler and pipe work. 2003-665 www.airliquidewelding.com Plasma and TIG processes used in automatic applica
More information41 T Korea, Rep. 52.3. 42 T Netherlands 51.4. 43 T Japan 51.1. 44 E Bulgaria 51.1. 45 T Argentina 50.8. 46 T Czech Republic 50.4. 47 T Greece 50.
Overall Results Climate Change Performance Index 2012 Table 1 Rank Country Score** Partial Score Tendency Trend Level Policy 1* Rank Country Score** Partial Score Tendency Trend Level Policy 21 - Egypt***
More informationThe table below lists the symbols used on the Clamp and/or in this manual. Important Information. See manual.
i800 AC Current Clamp Instruction Sheet Introduction The i800 AC Current Clamp, the Clamp, has been designed for use with multimeters, recorders, power analyzers, safety testers, etc., for accurate non-intrusive
More informationGROWTH COMPETENCE COMMUNICATION
GB COMPANY OVERVIEW GROWTH Vision & Values COMPETENCE COMMUNICATION 2 FAST FACTS ORGANIZATION OPERATIONS HIST TORY Wld Weld to Believe Bli COMPETENCES PRODUCTS MARKET VISION 3 SELCO GROUP Private share
More informationFE/MMT/PMT/WS MIG/MAG welding gun range
High quality materials and effective design Key features The best combination of weight and balance ensures welding craftsmen comfortably deliver their skill weld after weld. Choose from a wide range of
More informationNetFlow Feature Acceleration
WHITE PAPER NetFlow Feature Acceleration Feature Description Rapid growth in Internet and intranet deployment and usage has created a major shift in both corporate and consumer computing paradigms. This
More informationQuick release couplings SPC Self aligning and flat faced
Quick release couplings SPC Self aligning and flat faced Applications Machine tools : connection and disconnection of machining heads and broaching heads. Machine tools : hydraulic clamping and palletisation.
More informationCisco Blended Agent: Bringing Call Blending Capability to Your Enterprise
DATA SHEET Cisco Blended Agent: Bringing Call Blending Capability to Your Enterprise Cisco ICM software has traditionally enabled companies to distribute inbound service volume to a variety of termination
More informationINTERNATIONAL TRACKED POSTAGE SERVICE
INTERNATIONAL TRACKED POSTAGE SERVICE Index Expanding Internationally...03 The Post NL Service...04 How it works... 05 Post NL Rates...06 Transit times...07 Customer Service...08 Expanding Internationally
More informationECOCIAT. Domestic hot water heat recovery unit
Heat recovery unit Domestic hot water High energy efficiency with R410A Compact and quiet Scroll compressors Brazed-plate heat exchangers Heating Heat recovery ENVIRONMENTALLY HFC R410A PROTECTION DE FRIENDLY
More informationALLROUNDER 420 C GOLDEN EDITION
Facts and figures ALLROUNDER C GOLDEN EDITION Distance between tie bars: x mm Clamping force: 1 kn Injection unit (acc. to EUROMAP): 29 www.arburg.com C GOLDEN EDITION Machine dimensions 85 33 125 195
More informationTIG torches... 3-2 to 3-5 Tungsten electrodes... 3-6 to 3-7 TIG consumables... 3-8 Miscellaneous... 3-9
3- welding torches........................................................... 3-2 to 3-5 Tungsten electrodes........................................ 3-6 to 3-7 consumables........................................................
More informationMake the invisible visible! SENSORS WITH EXCELLENT BACKGROUND SUPPRESSION
Make the invisible visible! SENSORS WITH EXCELLENT BACKGROUND SUPPRESSION photoelectric sensors Thanks to its vision for innovation and technological enhancement, Contrinex keeps on setting new standards
More informationSVENSKA.......................................................3 DANSK.........................................................10 NORSK................
Caddy 150 & Caddy Tig 150 LHQ 150, LTV 150 SVENSKA.......................................................3 DANSK.........................................................10 NORSK.........................................................17
More informationKNX The worldwide STANDARD for home and building control. KNX Association Vassilios Lourdas System Engineer vassilios.lourdas@knx.
KNX The worldwide STANDARD for home and building control KNX Association Vassilios Lourdas System Engineer vassilios.lourdas@knx.org KNX Association International Slide nr. 2 Historical aspects Until 1997
More informationTBi Industries 4 1. 0. RoboMIG TBi Robot welding torches 1 YEAR ON TCP. Air and water cooled. Also for robots with integrated cable assemblies
TBi Industries RoboMIG TBi Robot welding torches Air and water cooled Also for robots with integrated cable assemblies Stable design for reliable 1 YEAR ON TCP IEC 60974-7 4 1. 0 Engineering the details
More informationESAB MIG/MAG Robot packages Yaskawa Motoman
ESAB MIG/MAG Robot packages Yaskawa Motoman MA 1400 & 1900 with Aristo W8 2 Anybus Devicenet Processes used in robotic welding include: MIG/MAG MIG/MAG pulse MIG/MAG SuperPulse Short arc / pulse Pulse
More informationSquare Wave TIG 200 TIG WELDING MACHINE
Square Wave TIG 200 TIG WELDING MACHINE Simplicity Without Compromise The Square Wave TIG 200 is a portable TIG and stick welding machine that lets hobbyists, makers, small fabricators and craftsmen explore
More informationTBi Industries. MIG / MAG Welding torches TBi Expert 0. 1
TBi Industries MIG / MAG Welding torches TBi Expert 1 0. 1 CONTENTS. TBi Expert Gas cooled torches TBi 150 Classic Series 60% (10 min.) Mix : 150 A CO 2 : 180 A Ø 0.6-1.0 mm Water cooled torches TBi 240
More informationfuse.on Technical background information provided by SIBA: Know-how on Electrical Fuses
fuse.on Technical background information provided by SIBA: Know-how on Electrical Fuses Edition Just four steps to getting the PV Fuse that suits your needs How to determine Rated Values that enable optimum
More informationCaddy. Mig C200i. Instruction manual
Caddy Mig C200i Instruction manual 0440 001 001 GB 111107 Valid for serial no. 932-xxx-xxxx - 2 - 1 SAFETY........................................................... 4 2 INTRODUCTION...................................................
More informationTELESCOPE Motorized Lighting Suspension
TELESCOPE Motorized Lighting Suspension Mod. 8400 FEATURES The De Sisti TELESCOPE is a single point suspension specifically designed to provide rigidity and stabilization of all moving parts. It can extend
More informationUNI FLAME AUTOLIFT MIG/MMA/TIG. 165/190/220/250 Inverter Manual. 240 Volt. Standard MIG / MAG
UNI FLAME AUTOLIFT MIG/MMA/TIG 165/190/220/250 Inverter Manual 240 Volt Standard MIG / MAG UNI FLAME AUTOLIFT 2YEARS Warranty * Machine Model Description Part Number MIG/MM/TIG Inverter KUMJR165 / 190
More informationV3.2-12-2013 PREFAB WELDING PREFAB WELDING
SP121 ø12 - ø121 mm ø0,45 to ø4,5 '' Technical Specifications - Basic stainless steel jaws Ø 1 to 4,5 ( Ø 24 to Ø 121 mm ) - Additional stainless steel jaws Ø 0,45 to 4,25 (Ø12 to Ø108mm) - Electric rotation
More informationPM 2 GRUNDFOS INSTRUCTIONS
PM GRUNDFOS INSTRUCTIS Max. m. (default) Max. t amb Min. 0 C P start =. bar (default) Max. 0 bar ( ) Min..9 bar (0.9 ) (default) bar Max. t liq Min. 0 C l / = max. 0 A 4 60 6 7 6. bar + 0.. bar + 0. =.
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN
IWAKI MAGNETIC DRIVE PUMPS Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made
More informationMICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features
Central 48 V DC Power Supplies for PoE-Components MICROSENS Description Active network equipment which is supporting the Power-over-Ethernet functions, typically requires a powerful 48 V DC power supply.
More informationCONTENTS --------------------------------------------------------------------------------------
en WiFi USB DONGLE CONTENTS -------------------------------------------------------------------------------------- 9 SAFETY AND SET-UP 10 WiFi USB DONGLE 10 Packing contents 10 Special features 10 Connection
More informationEnvironmental Chambers For Solar Panel Testing
Environmental Chambers For Solar Panel Testing ESPEC s Environmental Chambers Designed for Solar Panel Testing Solar panels need to pass environmental tests per IEC and/or UL requirements to prove their
More informationTurning centers. Mill Turn Lathes. With the most powerful control in industry: SingleMax
Turning centers Mill Turn Lathes With the most powerful control in industry: SingleMax TMi General purpose- and heavy duty-lathes > TM 6 i > TM 8 i > TM 10 i > TM i > TM 18 i > TM 18 Li Benefits of the
More informationZS4-SF1-T Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with test socket
Technical Datasheet SNK636D00 Catalogue Page SNK636S00 ZS-SF-T Screw Clamp Terminal Blocks For x 0 and x fuses - with test socket - Protect your circuit with x and x0 fuse terminal blocks (fuse not supplied
More informationMEDICLEAN. Perfect Hygiene Air-Conditioning Solutions for all Hospital Departments. Weiss Klimatechnik GmbH Geräte- und Anlagenbau
Perfect Hygiene Air-Conditioning Solutions for all Hospital Departments Weiss Klimatechnik GmbH Geräte- und Anlagenbau in use throughout the world Al-Batnan Medical Center, Tobruk System solutions for
More informationPLM High Efficiency Motors. Lowara
PLM High Efficiency Motors Lowara FACTS & BENEFITS High efficiency motors for high efficiency pumps: Lowara presents the new range of PLM motors. High efficiency means: Energy savings Respect of the environment
More informationMicro cogeneration. Affordable, efficient and innovative
Micro cogeneration Affordable, efficient and innovative A compact and efficient solution A compact and efficient solution Organisations are increasingly looking for environmentally friendly systems to
More informationCONDITION MONITORING INCREASE THE UPTIME OF YOUR MACHINES
INCREASE THE UPTIME OF YOUR MACHINES NSK s Condition Monitoring Services (CMS) NSK CMS Process CONTINUOUS ANALYSIS CMS ASSESSMENT MEASUREMENT & DATA COLLECTION HEALTHMAP REPORT RECOMMENDED ACTIONS DYNAMIC
More informationElectric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
More informationBrochure More information from http://www.researchandmarkets.com/reports/1339929/
Brochure More information from http://www.researchandmarkets.com/reports/1339929/ The 2011 World Forecasts of Machine Tools That Remove Material by Laser or Light, Photon, Ultrasonic, Electro-Discharge,
More informationZS6-S Screw Clamp Terminal Blocks Disconnect with blade
Technical Datasheet SNK646D00 Catalogue Page SNK646S00 ZS6-S Screw Clamp Terminal Blocks Disconnect with blade - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,
More informationZS25 Screw Clamp Terminal Blocks Feed-through
Technical Datasheet SNK668D0 Catalogue Page SNK678S0 ZS Screw Clamp Terminal Blocks Feed-through Save space by connecting conductors up to mm² AWG in just mm 0.47 in spacing. SNK68V004 SNK004F0000 D CAD
More informationHow To Connect A Cisco Aironet 350 Series Wireless Bridge To A Network With A Wireless Bridge
Data Sheet Cisco Fixed Wireless Solution The Cisco Aironet 350 Series enables high-speed long-range outdoor links between buildings and is ideal for installations subject to plenum rating and harsh environments.
More informationSingle and three phase modular Automatic Transfer Switch from 40 to 160 A
NEW SINGLE PHASE Single and three phase modular Automatic Transfer Switch from 40 to 160 A SWITCH TO INNOVATION SOCOMEC: intelligent changeover systems As a worldwide leading company in changeover power
More informationCable Trolleys and Festoon Systems Product Catalogue
Cable Trolleys and Festoon Systems Product Catalogue Technical Information Component Specification Company Profile Established in 1972, Helm Hellas S.A. is focused on designing developing, producing and
More informationCisco 7200 and 7500 Series Routers
PRODUCT BULLETIN, NO. 965 Cisco 7200 and 7500 Series Routers Software, Feature, and Feature Upgrade Licenses Introduction Cisco IOS Software on the Cisco 7200 and 7500 Series offers three distinctly different
More informationMOLECULAR DRAG PUMPS MDP SERIES
MOLECULAR DRAG PUMPS MDP SERIES MOLECULAR DRAG PUMPS MDP SERIES If you need: to replace a rotary vane pump with a dry pump for an application at 10-3 a turbopump that can operate up to 10 a pump that can
More informationHow To Build A Powerline Box Powerline Generator
Quick Reference Guide DYNAMIC Series Dynamic Series is a broad product family that provides connector solutions ranging from signal level circuitry through power circuit connectivity in a ruggedized, industrialized
More informationW- Series. Features: WOB. Mechanical Data Case : Moulded plastic. Lead : Solder plated. Weight : 1.10 grams. Page <1> 15/07/08 V1.
Features: Surge overload ratings to 40 amperes peak. Ideal for printed circuit board. Reliable low cost construction. High temperature soldering guaranteed: 260 C/10 seconds/0.375inch (9.5mm) lead lengths
More information24 Hour Secure Operating Centre 0844 239 0035* Customer Services 0844 239 0032* (Monday-Friday 8.30am-5.30pm)
User Guide 24 Hour Secure Operating Centre 0844 239 0035* or if calling from outside the UK +44 208 305 2026 Customer Services 0844 239 0032* (Monday-Friday 8.30am-5.30pm) * Calls charged at 3p per minute
More information