AIR LIQUIDE WELDING TM Welding Equipment
|
|
- Garry Hopkins
- 7 years ago
- Views:
Transcription
1 AIR LIQUIDE WELDING TM Welding Equipment AIR LIQUIDE WELDING equipment was designed and manufactured to withstand the rugged welding environment found in the maintenance, construction and automotive industries. By manufacturing each piece of welding equipment to an ISO 9001 standard, Air Liquide ensures consistent quality and years of dependable service to you, our customer. This worldwide commitment to design, manufacturing excellence and quality has earned us the designation of being the True Force in Welding.
2 Stick (SMAW) Units The A 230 AC/DC and the A 250 AC/DC are excellent choices for stick welding applications. Features include multiple input voltages, external weld cable connections and running gears. The A 160i Lift is designed for Stick and TIG (Lift) applications that require portability and outstanding arc performance. Builtin features like Sinelink, hot start, arc force and anti-stick make this unit a popular choice for welding professionals. MODEL A 230 AC/DC A 250 AC/DC A 160i Lift INPUT POWER Type CC CC CC Current AC/DC AC/DC DC Range (Amps) Duty Cycle A, AC A, DC 225 A, 20% 150 A, 20% A, AC A, DC 250 A, 30% 180 A, 30% A, DC 140 A, 60% Stick (SMAW) TIG (GTAW) Scratch TIG (GTAW) Lift Input Volts (AC) 230/ /460/ (Sinelink) Phase Frequency (Hz) WEIGHT 62 kg (136 lb) 80 kg (176 lb) 9.9 kg (21.8 lb) PART NUMBER ALW-M ALW-M ALW-M
3 TIG (GTAW) Units The TIG lineup from AIR LIQUIDE WELDING is comprised of two models that offer 90 and 160 amps of welding current. These machines are excellent choices for TIG and Stick applications. MODEL T 90i Lift T 160i Lift Type CC CC Current DC DC Range (Amps) 5-90 A, DC A, DC Duty Cycle 90 A, 20% 160 A, 40% INPUT POWER Stick (SMAW) TIG (GTAW) Scratch TIG (GTAW) Lift Input Volts (AC) Phase 1 1 Frequency (Hz) WEIGHT 3.2 kg (7 lb) 9.9 kg (21.8 lb) Repair, Hobbyist Repair, High Tech Manufacturing PART NUMBER ALW-M ALW-M
4 Units Available in four models from amps, the M series from AIR LIQUIDE WELDING provides end users with many unique options and accessories. The M 132 and M 172 both offer built-in spool gun connections and a secondary spindle for.45 kg (1 lb) wire spools. The M 200 and M 252 showcase features like articulating heads on welding guns, euro-weld cable connections, 4-drive roll system, built-in spool gun connections, cold wire jog, gas purge, wire run-in control, 4 T welding, and a spot timer. MODEL M 132 M 172 M 200 M 252 Type CV CV CV CV Current DC DC DC DC Range (Amps) A, DC A, DC A, DC A, DC Duty Cycle 90 A, 20% 120 A, 25% 150 A, 60% 200 A, 60% INPUT POWER Stick (SMAW) TIG (GTAW) Scratch TIG (GTAW) Lift Input Volts (AC) / /230/460/575 Phase Frequency (Hz) WEIGHT 23 kg (50 lb) 28 kg (62 lb) 75 kg (165 lb) 95 kg (209 lb) Autobody, Sheet Metal Fabrication, Hobbyist Autobody, Sheet Metal Fabrication, Hobbyist Repair, Light Industrial Fabrication Repair, Industrial Fabrication PART NUMBER ALW-M ALW-M ALW-M ALW-MW
5 Engine-Driven Welding Generator Welders can depend on the WOLFPAC series for quality and dependability. The unique generator, found inside all WOLFPAC units, delivers a smooth weld output and superior auxiliary power. Its brushless design increases efficiency, reduces maintenance, and extends the life of the machine. End users who are looking for the right combination of weld output, auxiliary power, weight, and a Honda or Kohler engine will immediately recognize that the WOLFPAC series is truly one of the leaders in its class of engine-driven welding generators. MODEL WOLFPAC 175 WOLFPAC 270K Type CC CC/CV Current DC DC Range Duty Cycle 140 A, 100% 250 A, 100% MA. AUILIARY POWER Stick (SMAW) TIG (GTAW) Scratch Single Phase 4 kva 10 kva Three Phase 10 kva ENGINE BRAND Honda (G 270) 9 HP Kohler Command CH HP WEIGHT 97 kg (214 lb) 280 kg (617 lb) Construction Sites, Rental, Standby Power Fabrication, Pipe Welding, Rental, Standby Power PART NUMBER ALW-MU ALW-MU111015K
Welding Equipment. Welding Equipment Catalog
Weldg Equipment Weldg Equipment Catalog WELDING SOLUTIONS 2014 Weldg Equipment ACC ACCESSORIES Table of contents Conectable to Generators with imum of 1.5 times the absorbed power of weldg mache. 4 St
More informationSquare Wave TIG 200 TIG WELDING MACHINE
Square Wave TIG 200 TIG WELDING MACHINE Simplicity Without Compromise The Square Wave TIG 200 is a portable TIG and stick welding machine that lets hobbyists, makers, small fabricators and craftsmen explore
More informationSMARTY 160 POWER page 4-5 SMARTY 180 / 220 XL page 4-6 SMARTY TX 250 page 4-7. SMARTY TX 160 Alu page 4-8 SMARTY TX 220 Alu page 4-9
CHAPTER TIG welding Introduction pages - & - WELDING POWER SOURCES DC power sources SMARTY 60 POWER page -5 SMARTY 80 / 0 XL page -6 SMARTY TX 50 page -7 AC/DC power sources SMARTY TX 60 Alu page -8 SMARTY
More informationOverview on Welding and Ergonomics
Jannuary, 30-2014 Overview on Welding and Ergonomics Luca Costa srl, Italy luca.costa@iisprogress.it Approaching ergonomics in welding fabrication Welding fabrication involves several operations which
More informationTIG INVERTER INSTRUCTION MANUAL
TIG INVERTER INSTRUCTION MANUAL Contents Warning General Description Block Diagram Main Parameters Circuit Diagram Installation and Operation Caution Maintenance Spare Parts List Troubleshooting 3 4 4
More informationAPPLICATIONS. Semiautomatic Automation Hard Automation Heavy Equipment Transportation Fabrication FEATURES, CONT D. UNIT REQUIRES
ADVANCED PROCESS WELDERS Power Wave Processes Stick, TIG, MIG, Pulsed MIG, Flux-Cored, Tandem MIG, Carbon Arc Gouging Product Number K3279-1 Power Wave S700 S700 Input Power 380-415/440-460/500/575/3/50/60
More informationEXTRA POWER, EXTRA PERFORMANCE
EXTRA POWER, EXTRA PERFORMANCE Ranger 250 GXT Shown: Ranger 250 GXT, K2382-4 KEY FEATURES The Ranger 250 GXT has all the extras you need for construction and maintenance work. Versatile AC/DC welding output
More informationElectric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
More informationWorld Leader in HV Testing Technology
World Leader in HV Testing Technology Cable Fault Locators w/tdr Oil/Fluid Dielectric Testers Very Low Frequency AC Technology W/TD & PD Diagnostics Portable AC Hipots ---------------------------------
More informationWelding & Cutting Solutions. 2016 Equipment Catalog
Welding & Cutting Solutions 2016 Equipment Catalog TABLE OF CONTENTS Icons and Warranty Information... 2 Stick Welders... 3-10 TIG Welders... 11-20 MIG: Wire Feeder/Welders... 21-30 MIG & FCAW: Industrial
More informationTANK FABRICATION. Automated Solutions for Your Tank Fabrication Project. Bug-o Systems www.bugo.com
TANK FABRICATION Automated Solutions for Your Tank Fabrication Project. Bug-o Systems www.bugo.com BUG-O ALL TIME GIRTH WELDER Bug-o Systems offers the Automatic Girth Welder for tank fabrication applications.
More informationSTT -10 WIRE FEEDER. For Surface Tension Transfer TM. Process
STT -10 WIRE FEEDER For Surface Tension Transfer TM Process STT -10 WIRE FEEDER ADVANTAGE LINCOLN The STT-10 does a lot more than just feed wire. This new generation microprocessor controlled wire feeder
More informationA Beginner s Guide to MIG Welding
A Beginner s Guide to MIG Welding MIG Welding Names MIG welding, or MIG, is an acronym for Metal Inert Gas welding. MIG is a commonly used and accepted slang term that was appropriate when the process
More informationPipeWorx Welding System
PipeWorx Welding System Issued August 014 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Fabrication Process Piping Refinery Petrochemical Power HVAC and Water Pipe Processes
More informationINTRODUCTION and PRODUCT SELECTION GUIDE
INTRODUCTION and PRODUCT SELECTION GUIDE QUALITY AS STANDARD MOSA manufactures a complete range of engine driven welder-generators from 150 to 600 amps welding capacity with AC auxiliary power generation
More informationYEAR/MODEL ANNÉE/MODÈLE BODY SHOP WELDING EQUIPMENT
YEAR/MODEL ANNÉE/MODÈLE DATE OF ISSUE DATE EN VIGUEUR BULLETIN NUMBER NUMÉRO DU BULLETIN Body Repair News ALL APRIL 15, 2014 BRN-14-1 BODY SHOP WELDING EQUIPMENT DISCLAIMER: This publication provides details
More informationCSP #34-013 - Welding Equipment, Supplies, Consumables & Bottled Gas
CSP #34-013 - Welding Equipment, Supplies, Consumables & Bottled Gas Janet Bradley, Buyer Commodity #225 Bid Reference: 34-013 Expires July 2017 Prices firm thru July 2015, automatically renewing unless
More informationKemppi Mastertig MLS 2500 and 3500. Welding Versatility for Professionals
Kemppi Mastertig MLS 2500 and 3500 Welding Versatility for Professionals Kemppi Mastertig MLS 2500 and 3500 Welding Versatility for Professionals The Mastertig MLS 2500 and 3500 offer outstanding TIG performance
More informationHERZ-Thermal Actuators
HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01
More informationUNI FLAME AUTOLIFT MIG/MMA/TIG. 165/190/220/250 Inverter Manual. 240 Volt. Standard MIG / MAG
UNI FLAME AUTOLIFT MIG/MMA/TIG 165/190/220/250 Inverter Manual 240 Volt Standard MIG / MAG UNI FLAME AUTOLIFT 2YEARS Warranty * Machine Model Description Part Number MIG/MM/TIG Inverter KUMJR165 / 190
More informationWhy Buy HVI VLF Products?
Very Low Frequency AC Hipots AC testing of cables and electrical apparatus is now easier than ever. Since the introduction of the High Voltage, Inc. line of portable and affordable VLF hipots, there is
More informationPURPOSE-BUILT FOR PIPE WELDING. Cross Country 300 Engine-Driven Welder
PURPOSE-BUILT FOR PIPE WELDING Cross Country 300 Engine-Driven Welder PURPOSE-BUILT FOR PIPE WELDING Cross Country 300 Engine-Driven Welder When you re in the cross-country pipeline welding business, your
More informationGENERAL INFORMATION ORDERING INFORMATION
GENERAL INFORMATION Lenco 2 THE LENCOSPOT MARK II Autobody Dual-Spot Welder Offers All These Features: Protected Control Panel Streamlined Construction On/Off Indicating Switch Solid State Timer Tool Storage
More informationprogram program title 08-09 09-10 10-11 11-12 12-13 13-14
A10100 Associate in Arts 134 195 228 229 216 231 A10200 Associate in Fine Arts 3 5 3 6 A10300 Associate in General Education 3 14 25 46 137 216 A10400 Associate in Science 4 6 6 3 8 9 A1040D Associate
More informationTECHNICAL SPECIFICATION FOR PROJECTION WELDING MACHINE (Qty. 2 Nos.)
TECHNICAL SPECIFICATION FOR PROJECTION WELDING MACHINE (Qty. 2 Nos.) 1. Requirement: Two (02) Nos. DC Type, 3 phase, 3 wire Projection Welding Machine is required for welding of ventilation M.S. / Stainless
More informationA Beginner s Guide to TIG Welding
A Beginner s Guide to TIG Welding TIG Welding Names TIG Welding, or TIG, is an acronym for Tungsten Inert Gas welding. TIG is a commonly used and accepted slag term. The proper terminology is Gas Tungsten
More informationVarioSynergic 3400 / 4000 / 5000 VarioSynergic 3400-2 / 4000-2 / 5000-2. MIG/MAG welding
VarioSynergic 3400 / 4000 / 5000 VarioSynergic 3400-2 / 4000-2 / 5000-2 MIG/MAG welding A high-calibre machine that s user-friendly, too. GENERAL REMARKS UTILISATION It s got the lot The VarioSynergic
More informationMaster catalogue arc equipment
Master catalogue arc equipment MMA - TIG - MIG/MAG - Plasma cutting Master catalogue arc equipments 2008 / 2009 www.oerlikon-welding.com 2006-93 2008-204 2008-205 2008-206 OERLIKON is part of the Air Liquide
More informationWelder/generator is warranted by Miller for 3 years, parts and labor. Engine is warranted separately by engine manufacturer.
Big Blue 700 Duo Pro Issued May 2015 Index No. ED/5.6 Diesel Engine-Driven Welder/AC Generator Quick Specs Heavy Industrial Applications Pipe Welding Mechanical Contractor Construction Repair Processes
More informationDiplomas. Technical Diploma in A/C Refrigeration: Residential A/C & Refrigeration **
Diplomas Technical Diploma in A/C Refrigeration: Residential A/C & Refrigeration ** Credit Hours 51 2 years 6 O*net Code 49 9021.01, 49 9021.02 Heating & Air Conditioning Mechanics & Installers, Refrigeration
More informationProduced by Leading Automotive Book Publisher ( www.cartechbooks.com )
Author: Jerry Uttrachi, President of WA Technology Produced by Leading Automotive Book Publisher ( www.cartechbooks.com ) Book is 8 1/2 inch X 11 inch Printed on Quality Glossy Paper. 176 Pages, with 450
More informationChapter 5 - Aircraft Welding
Chapter 5 - Aircraft Welding Chapter 5 Section A Study Aid Questions Fill in the Blanks 1. There are 3 types of welding:, and, welding. 2. The oxy acetylene flame, with a temperature of Fahrenheit is produced
More informationIt s storming outside. Neighbors have no power. For you, dinner s on in 15.
It s storming outside. Neighbors have no power. For you, dinner s on in 15. 2 The answer to Mother Nature s mood swings. Keep the game on. The coffee brewing. And the moment alive. Whatever the weather
More informationBulletin 150 Smart Motor Controllers SMC-3 Smart Motor Controller
Overview/Modes of Operation Bulletin 150 Smart Motor Controller The SMC-3 is a compact, simple to use, solid-state motor controller designed to operate 3-phase motors. It features a built-in overload relay
More informationHCS-3300/3302/3304 USB Remote Programmable Laboratory Grade Switching Mode Power Supply
1. INTRODUCTION HCS-3300/3302/3304 USB Remote Programmable Laboratory Grade Switching Mode Power Supply User Manual This family of efficient, upgraded SMPS with small form factor, auto cross over CV CC,
More informationWelding & Fabrication Industry Certification Programs
FALL 2013 Welding & Fabrication Industry Certification Programs Co-Sponsored by: Rochester Arc + Flame Center 125 Fedex Way, Rochester, NY 14624 www.rocafc.com Welding Industry Opportunities Welders are
More information47000 SERIES - ELECTRONIC TRANSFORMERS
7000 SERIES - ELECTRONIC TRANSFORMERS MYRRA encapsulated electronic transformers are Switched Mode Power Supplies based on Flyback topology. They constitute an interesting alternative to the traditional
More informationWELDING.. 01.14. 8K. Country of origin Norway anche Nilssen Norway. Printer: Erik T ID No: 806007
WELDING Wilhelmsen Ships Service Marine Products High performance. Improved safety. Controlled costs. Welding. It s a regular and routine task during maintenance and repair. Whereever and whenever hot
More informationEML 2322L MAE Design and Manufacturing Laboratory. Welding
EML 2322L MAE Design and Manufacturing Laboratory Welding Intro to Welding A weld is made when separate pieces of material to be joined combine and form one piece when heated to a temperature high enough
More informationLoc-1Tx/Loc-5Tx/Loc-10Tx Data Sheet V3.3
Typical Applications Typical Applications Construction Transmitter Assembly Pipe & cable locator transmitter Transmitting active signals for the location of buried pipes and cables High impact ABS Weight
More informationPoor quality welds Machine downtime High maintenance costs Lost revenue
w e l d m o n i t o r i n g Weld Checkers Multi-Function Weld Monitors Weld Thru Current & Force Miniature & Handheld Weld Checkers Electronic Force Gauges Displacement Monitors PC Data Collection High
More informationWelding Reels HANNAY REELS. For use for: Arc Welding Gas Welding Cutting Operations H-9422-W Rev. 5. The reel leader.
Welding Reels HANNAY REELS For use for: The reel leader. Arc Welding Gas Welding Cutting Operations H-9422-W Rev. 5 Series SWCR/WCR Arc Welding Reels: Power or Manual Rewind To handle cable to 400 amps.
More informationJNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410
The INTEG is an Ethernet I/O (digital, analog) device that monitors and controls a small set of process signals. functions as both basic I/O for integration with another application or system AND as a
More informationTIG torches... 3-2 to 3-5 Tungsten electrodes... 3-6 to 3-7 TIG consumables... 3-8 Miscellaneous... 3-9
3- welding torches........................................................... 3-2 to 3-5 Tungsten electrodes........................................ 3-6 to 3-7 consumables........................................................
More informationPROPER SELECTION OF CONTROL CIRCUIT TRANSFORMERS WHITE PAPER BULLETIN 1497, 1497A, AND 1497B
WHITE PAPER PROPER SELECTION OF CONTROL CIRCUIT TRANSFORMERS BULLETIN 1497, 1497A, AND 1497B CONTROL CIRCUIT TRANSFORMERS The proper selection of the control circuit transformers is important for suitable
More informationEverything you need for protection scheme testing
Power System Simulator for Testing Protection Relays and Schemes Everything you need for protection scheme testing The is the only instrument with the high power, flexibility and software to perform full
More informationQuickSpecs. HP 480/277 Volt Solutions. Overview
Overview As the quest for efficiency continues it becomes apparent that what worked in the past needs improvement. More and more data center managers are looking at alternate power plans to distribute
More informationA reasonable, new furnace (mid efficiency) has the following electrical requirements:
June 2007 Power Backup Systems for Your Home. As promised from a previous safety meeting, a couple of options to protect you home in the event of a power failure. These options are for the most serious,
More informationJob Ready Assessment Blueprint. Welding. Test Code: 4172 / Version: 01. Copyright 2013. All Rights Reserved.
Job Ready Assessment Blueprint Welding Test Code: 4172 / Version: 01 Copyright 2013. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written Assessment
More informationFocus on Building Louvres. Sun shading & comfort ventilation. www.linak.com/techline
Focus on Building Louvres Sun shading & comfort ventilation www.linak.com/techline Improve energy efficiency and indoor climate with building louvres There is an increasing focus on energy conservation
More information1.44 kw Programmable DC Power Supplies XLN Series
Data sheet 1.44 kw Programmable DC Power Supplies XLN Series New Family of High Density System Power Supplies The B&K Precision XLN series are compact, programmable, single-output DC power supplies, suitable
More informationThe TransCut 300 plasma cutting system - Plasmacutting with liquid working medium
The TransCut 300 plasma cutting system - Plasmacutting with liquid working medium Speaker Sector Company Street Town Excellent portability with the TransCut 300 plasma cutting system Compact, portable
More informationDIESEL POWER, EXPANDED CAPABILITIES
DIESEL POWER, EXPANDED CAPABILITIES Ranger 305 D Shown: Ranger 305 D, K1727-3 KEY FEATURES Choose the Ranger 305 D for extended fuel efficiency and compatibility with diesel-powered fleets. The 305 D is
More informationSIZING THE PRIMARY POWER SYSTEM FOR RESISTANCE WELDERS
SIZING THE PRIMARY POWER SYSTEM FOR RESISTANCE S By Jack Farrow, May, 2004 WELDING TECHNOLOGY CORPORATION ABSTRACT Information on how to select the correct size of substation transformer and 480V bus to
More informationUltrasonic Welding Solutions. plasquip.com.au
Ultrasonic Welding Solutions Whatever the volume or scope of your manufacturing operations, talk to PLASQUIP SALES today about a Ultrasonic Welding solution that will not only meet but also exceed your
More informationunderstanding medium frequency induction melting furnace and its components
understanding medium frequency induction melting furnace and its components 9 Spruce Street, Jersey City, NJ 07306 USA sales@electroheatinduction.com INDUCTION MELTING FURNACE AND ITS COMPONENTS The purpose
More informationOutput Range DC Stick 45 750 A AC Stick 35 575 A* MIG/FCAW 14 40 V DC TIG 20 450 A AC TIG 20 375 A* Battery Charge 12/24 V, 50 750 A*
Big Blue Air Pak Issued July 2013 Index No. ED/10.5 Diesel Engine-Driven Welder/ AC Generator/Air Compressor Quick Specs Heavy Industrial Applications Railroad Maintenance Mining Maintenance Maintenance
More informationLithium Ion Battery Specifications
Lithium Ion Battery Specifications Type: Cylindrical Lithium Iron Phosphate Battery Mode: LFP-26650-3300 AA Portable Power Corp. Prepared by Checked by Approved by 1 . Product Specifications Type ------------
More informationmecotron Safety relay ESTOP-2 For emergency stop monitoring
E0006 000824 Safety relay E-2 For emergency stop monitoring Description The safety module E-2 for emergency stop monitoring is used for safety breaking one or more circuits and is designed to be incorporated
More informationMODEL HSR-007 Direct Drive Rolling Steel
MODEL HSR-007 Direct Drive Rolling Steel 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HSR-007
More informationQUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE
QUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE FABRICATION, MACHINING, METAL CASTING, LOAD TESTING, SAND BLASTING & PAINTING,
More informationMaxstar TIG/Stick Welding
00 Series Issued February 001 Index No. DC/ Maxstar TIG/Stick Welding Power Source Quick Specs Heavy Industrial Applications Petro/Chem Fabrication Aerospace Food/Beverage Industry Mechanical Contractors
More informationSWISS MADE. Series 320 XB MASTER. Analytical. Precision
SWISS MADE MASTER Series Analytical Precision MASTER Series The Precisa 320 high performance series combines precision and quality, and offers the highest metrological performance and advanced integrated
More informationDC Electronic Loads 8500 series
Data Sheet DC Electronic Loads 8500 series 2400W 600 W - 1200 W 300 W Versatile & Economical DC Electronic Loads The 8500 series Programmable DC Electronic Loads can be used for testing and evaluating
More informationAMP Power Series Connectors
May 3, 2011 2011 Tyco Electronics Corporation. All Rights Reserved. TE Connectivity, TE Connectivity (logo) and TE (logo) are trademarks. Other logos, products and/or Company names might be trademarks
More informationCentro-Matic Automatic Lubrication Systems System Controls
Selecting the right controls for your automated lubrication system is one of the last steps in the design process. Several different models may be chosen to control power-operated pumps, depending on the
More informationINSTRUCTION MANUAL PLEASE READ ALL THE INSTRUCTIONS COMPLETELY BEFORE USE AND SAVE THIS MANUAL FOR FUTURE REFERENCE
INSTRUCTION MANUAL PLEASE READ ALL THE INSTRUCTIONS COMPLETELY BEFORE USE AND SAVE THIS MANUAL FOR FUTURE REFERENCE m Before Use Please read IMPORTANT SAFETY INSTRUCTIONS on page 10 before use. It is important
More informationUnit Plan. General Learning Target. Formative Assessment
Unit Plan Course: Ag Tech B Grade Level: 9 Course Description: In this course, the students will learn about the mechanical aspects of agriculture including, but not limited to alternate current electricity,
More informationSUBJECT: How to wire a motor starter Number: AN-MC-004 Date Issued: 2/08/2005 Revision: Original
SUBJECT: How to wire a motor starter Number: AN-MC-004 Date Issued: 2/08/2005 Revision: Original A motor starter is a combination of devices to allow an induction motor to start, run and stop according
More informationVoltage Regulator SPAU 341 C. Product Guide
Issued: July 1998 Status: Updated Version: D/25.04.2006 Data subject to change without notice Features Comprehensive voltage regulation for power transformers with on-load tapchangers in distribution substations
More informationFrequently Asked Questions Generators
Frequently Asked Questions Generators Fuel Related How much fuel do the generators use during normal operation? At exercise? The generator fuel consumption is given in each of the product knowledge books
More informationOPERATING INSTRUCTIONS
PIPELINE INSPECTION COMPANY LTD. OPERATING INSTRUCTIONS Wet Sponge Holiday Detectors 670,673, and MSRB Wet Sponge Holiday Detectors Portable and In-Plant Detectors Table of Contents General Information.......................3
More informationNetScanner System. Toronto: 416 754 7008, Montreal: 514 695 5147, Toll Free:1888 754 7008, Email: sales@a-tech.ca; www.a-tech.ca
Networking Solutions NetScanner System 9IFC/90DB/90DC FEATURES Ethernet Interface for NetScanner System Modules Provides Power and Hardware Trigger Interface 10/100 Base-T Auto-Negotiating Universal AC
More informationValve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
More informationWORD DEFINITION WORD (NATIONAL LANGUAGE)
WELDING GLOSSARY The Glossary has been created as part of the Migration for Development in the Western Balkans (MIDWEB) project, which received financial assistance from the European Commission IPA 2009
More informationAutomotive Sensor Simulator. Automotive sensor simulator. Operating manual. AutoSim
Automotive sensor simulator Operating manual AutoSim Contents Introduction.. page 3 Technical specifications.... page 4 Typical application of AutoSim simulator..... page 4 Device appearance... page 5
More informationCOMPANY PROFILE. THE DISTRIBUTION The BCS group includes three factories in Italy and the following subsidiaries:
GENERATING SETS ENGINE DRIVEN WELDERS THE DISTRIBUTION The BCS group includes three factories in Italy and the following subsidiaries: ALL MOSA PRODUCTS ARE MANUFACTURED IN AN AREA OF 75000 SQM OF WHICH
More information2350-011. Chapter 2 TIG welding
350-011 Chapter TIG welding TIG welding TIG welding overview and selection guide Scheme of a manual installation for TIG welding Helmet/mask Protective clothing Filler metal rod Earth clamp Fume extraction
More informationFastMig M A new breed of industrial workhorse
FastMig M A new breed of industrial workhorse Proven reliability from the top of the welding technology Top welding performance for industrial MIG/MAG welding. Welding machine with various configurations
More informationSECTION 13850 DETECTION AND ALARM
SECTION 13850 DETECTION AND ALARM PART 1 GENERAL 1.01 SUMMARY A. Section Includes 1. Control Panel 2 Associated Equipment B. Products Installed But Not Supplied Under This Section 1. Section 16140 - Wiring
More informationUnited Security Products Automatic Dialers are a NEW BREED of Security
Auto Voice Dialers United Security Products Automatic Dialers are a NEW BREED of Security Communications and Notification equipment for the Security Professional. Small, Compact and User Friendly. USP
More informationDET3 and 4 Contractor Series Earth/Ground Resistance Testers
DET3 and 4 Contractor Series 2, 3 and 4 point testing ART (Attached Rod Technique) testing capability and stakeless testing technique Choice of digital or analog display Warning indicators prevent test
More information帝 聞 企 業 股 份 有 限 公 司 DEE VAN ENTERPRISE CO., LTD. SP-235864 DSL-20WA 420024 1 Revision: A Date: 2011.10.24 FOR AC-DC LED DRIVER MODEL NO.
CUSTOMER: PART NUMBER: A200 APPROVAL SHEET FOR AC-DC LED DRIVER MODEL NO. DSL-20WA 420024 1 ORDER NO: SP-235864 承 認 書 确 認 后 請 簽 回 一 份 CUSTOMER APPROVED SIGNATURE DEE VAN ENTERPRISE CO., LTD (Head-Quarter)
More informationVirtual Reality Welder Training
Virtual Reality Welder Training Project No. S1051 Navy ManTech Program Presenters: Allan Cote, Electric Boat Tim Gifford, VRSim Nancy Porter, EWI Project Review for ShipTech 2005 March 1, 2005 Biloxi,
More informationInvision MPa Plus System
Invision MPa Plus System with Alumination Technology Issued Jan. 2015 Index No. DC/23.6 MIG Welding Power Source Quick Specs Heavy Industrial Applications Railroad Truck/Trailer Manufacturing Light Gauge
More informationSmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC
Summit Machine Tool Manufacturing L.L.C. SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC Summit Machine Tool Manufacturing L.L.C. SmartCut
More informationNon- Carbon Fiber Electrical Heating Textile Introduction:
Non- Carbon Fiber Electrical Heating Introduction: This Heating is a new generation electrical heating system which is specially designed for mobile heating, energy saving and safety orientated requirements
More information1. Introduction. 2. Components. 3. Optical Specifications. 4. Electric Specifications. 5. Dimension. 6. Operating Environment. 7.
SPECIFICATIONS Super Model: XHS-220S1 Class Solar Simulator 1. Introduction 2. Components 3. Optical Specifications 4. Electric Specifications 5. Dimension 6. Operating Environment 7. Warranty SAN-EI ELECTRIC
More informationCopper Alloys COPPER ALLOYS. Weld Tech News VOL 1. NO. 8
Copper Alloys Weld Tech News VOL 1. NO. 8 WELD TECH NEWS is a newsletter for welders working primarily in maintenance and repair. Each issue contains useful information on materials (cast irons, steels,
More informationLow Voltage Products. Switches Automatic Transfer Switches
Low Voltage Products Switches Automatic Transfer Switches Growing importance of a secure power supply Standby power is an integral part of many industrial and domestic electrical systems. High energy prices,
More informationBUB-110B. Portable Power Pack. Compact USB Battery Charger for up to 5 Smartphones and Mobile Devices. User Manual
BUB-110B High Capacity Portable Power Pack Compact USB Battery Charger for up to 5 Smartphones and Mobile Devices User Manual 2 Welcome Thank you for choosing Xuma. Congratulations on the purchase of your
More informationSynergic Aluminum Welding System. XR-AlumaFeed Input Power 24 VAC, 50/60 Hz. Wire Feed Speed 50 900 ipm (1.3 22.9 m/min.)
AlumaFeed Synergic Aluminum Welding System Issued April 016 Index No. DC/34.0 MIG Welding System for Aluminum Welding Quick Specs Heavy Industrial Applications Boat, ship and yacht building Recreational
More informationTEXNIKH 1501-05-07-02-00:2009 HELLENIC TECHNICAL SPECIFICATION. ежглеяис тгс йубеямгсеыс (теувос еутеяо) 33063 2009-12-23 ICS: 93.080.
ежглеяис тгс йубеямгсеыс (теувос еутеяо) 33063 2009-12-23 ICS 9308040 1501-05-07-02-002009 TEXNIKH HELLENIC TECHNICAL SPECIFICATION Road lighting columns and fixtures 10 313 111 45 33064 ежглеяис тгс йубеямгсеыс
More informationSummary of Changes in. ASME Section IX, 2000 Addenda
Summary of Changes in ASME Section IX, 2000 Addenda Prepared by Walter J. Sperko, P.E. Sperko Engineering Services, Inc 4803 Archwood Drive Greensboro, NC 27406 USA Voice: 336-674-0600 FAX: 336-674-0600
More information2350-012. Chapter 3 MIG/MAG welding
250-012 Chapter MIG/MAG welding 2000-489 MIG/MAG welding The transfer of metal Torch Nozzle Contact tip Gaseous protection Molten metal Electrode wire Weld bead MIG/MAG welding overview and selection guide
More informationindustrial drive systems AC LINE Spring-applied single-disc brake 73 341..A00 73 431..H00 73 241..E00 / 73 245..E00
industrial drive systems AC LINE Spring-applied single-disc brake 73 341..A00 73 431..H00 73 241..E00 / 73 245..E00 AC LINE Kendrion (Aerzen) GmbH, Germany Kendrion (Villingen) GmbH, Germany Kendrion Magnetic
More informationST Series POWER SUPPLIES USER INSTRUCTIONS
Introduction These instructions detail the installation and operation requirements for the ST20 & ST35 power supplies. These have been designed for operation in RV s providing a DC power system, with optional
More informationHour Trial of Accu-Speed and RMD with Every New Axcess Power Supply
Features and Benefits SOFTWARE (Standard) Multi-MIG capability Includes common carbon steel, aluminum and stainless welding programs, including patented Accu-Pulse, Accu-Curve and Accu-Speed (optional),
More informationRoofing hand tools overview 47
36 Roofing VARIMAT V2 38 / 39 UNIROOF E 40 TRIAC DRIVE PID / guiding help 41 X 84 42 BITUMAT B2 43 COMET SUB-ROOF 44 Roofing welders overview 45 EXAMO 46 Roofing hand tools overview 47 Flach- Roofing und
More informationPositive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
More information