FC2040 Fire control panel

Transcription

1 FC2040 Fire control panel Series FS20 (MP1.1) Sinteso TM Compact, prefabricated, microprocessor-controlled fire control panel for the connection of up to 504 addresses Fire control panel can be used as stand-alone version or networked Up to 16 stations such as fire control panels and fire terminals (in any arrangement) can be connected in one network Integrated emergency operation function Redundant network node, degrade operation according to EN 54 Fast Ethernet interface for heterogeneous network Integrated user-friendly operating unit Optional printer, key switch, LED indicators Slots for RS232, RS485 serial ports Emergency power supply for up to 72 h for emergency operating time Detection and automatic read-in (auto configuration) of all FDnet devices, providing immediate simple operation Processes signals from the Sinteso TM detector series Time and situation-dependent change over of the detector parameters Floor repeater displays, operating panels and alarm devices in the detector loop (FDnet) Flexible programming of complex applications and controls Stored data can be uploaded via remote access Firmware download of all processor controlled control panel components

2 System overview 2

3 Expansion to a complex fire detection system The high-performance FCnet/SAFEDLINK makes it possible to network up to 16 FC20xx fire control panels and FT2040 fire terminals together as required. The innovative redundant network nodes not only set new standards in terms of failsafe characteristics but also for high-speed data transfer. In addition, an Ethernet connection is available at each station. This Ethernet connection enables a maximum of 2 stations to be networked together (not EN 54-compliant). Characteristics For details about system networking, please refer to product data sheet The FC2040 is a compact fire control panel with an integrated operating unit that can process signals from Sinteso TM devices. The control panel can be used as a stand-alone unit or in a network. The control panel can be programmed with a user-friendly engineering tool (software) to create a system with great versatility. All detector lines are monitored for ground faults. Adaptation of the user text directly on the terminal or with the software engineering tool. Up to 1000 events can be stored according to various criteria. Automatic summer/winter time change. Connection of danger management systems via BACnet 3

4 Functional elements Operating unit The following are located on the operating unit: CPU module and the electronics for the operating unit Ethernet connection Slots for RS232, RS485 modules and networking modules (SAFEDLINK) Space for 'Kaba' or 'nordic' key switch Space for event printer Peripheral board The following are located on the peripheral board: Connection terminals for FDnet loops, remote transmission (alarm, fault), horn outputs, programmable control inputs/outputs, monitored alarm and fault output, degrade supply, power supply Power supply 150 W, degrade supply The power supply supplies the hardware and charges the batteries The batteries supply the emergency power in case of power failure Housing A pivoting mounting panel can be installed on the housing backplane to allow installation of: 1 fire brigade periphery module Configuration An engineering tool permits the system to be adapted to specific customers' requirements. Application ranges The FC2040 is ideally suited for medium-sized applications, e.g. in industrial plant, regional banks, office complexes, etc. or when networked as part of much larger applications. Operation Each control panel has an integrated operating panel. Additionally the control unit can be operation for another separate FT2040 operator terminal. For details and further information, please refer to product data sheet

5 Overview of FC2040 fire control panels FC2040-AA FC2040-AE With 2 LED indicators (48 LED indicator groups) Housing (Comfort) FC2040-AG With 4 LED indicators (96 LED indicator groups) 4 loop 4 loop 4 loop With power supply (150 W) With power supply (150 W) With power supply (150 W) Battery capacity max. 26 Ah Battery capacity max. 26 Ah Battery capacity max. 26 Ah FTO2001-A1 Event printer FH2002-A1 Housing (Standard) Options FH2003-A1 Housing (Comfort) Can be installed in FC2040-AA FC2040-AE FC2040-AG RS232 module must be ordered separately FCM2006-A1 (2xLED ind.) Operating add-on Empty housing for various applications e.g. for additional batteries, operating add-ons or event printer FCM2007-A1 (4xLED ind.) 48 LED indicator groups 96 LED indicator groups For retrofitting For retrofitting 5

6 Configuration of FC2040 in housing (Comfort) Basic equipment Designation Notes 1 Rear (Comfort) FHA2003-A1 2 Peripheral board (4-loop) FCI2004-A1 Nos. 1-5 > Basic equipment for each FC2040-xx (Comfort) 3 Power supply (SV 24V-150 W) V24230-Z6-A2 4 Mains terminals on DIN mounting rail TS35 Space for socket, relay modules, etc. 5 Operating unit FCM200x-xx Combined system operating panel and CPU, incl. cover 6 Space for batteries 2 x 12 V / 7 26 Ah Options 7 Relay module Z3B171 Relay for fire controls 8 Event printer FTO2001-A1 For event logging 9 Key switch (Kaba) FTO2005-C1 Key switch (nordic) FTO2006-B1 For operating access rights 10 Mounting plate FHA2007-A1 E.g. for fire brigade peripheral 11 RS485 module (isolated) FCA2002-A1 For peripheral devices with RS485 port 12 RS232 module (isolated) FCA2001-A1 For stations with RS232 port 13 Networking module (SAFEDLINK) FN2001-A1 For networking various stations Battery (12 V, 7 Ah, VDS, V0) FA2003-A1 14 Battery (12 V, 12 Ah, VDS, V0) FA2004-A1 For emergency power supply Battery (12 V, 26 Ah, VDS, V0) FA2006-A1 15 Fire brigade periphery module FCI2001-D1 For Germany (FBF, FSK, HM, isolating element, etc.) 16 Door contact kit FCA2009-A1 For monitoring the cover 17 Battery kit (9 Volt) FCA2010-F1 For 9 Volt battery (3 rd voltage source only for France) 18 Lithium battery 9 V / 1 Ah For FCA2010-F " mounting kit FHA2016-A1 For the installation in 3 rd party housings 20 Power supply kit (150 W, B) FP2005-A1 For additional power supply

7 Technical data Mains voltage Power supply Operating voltage Operating current Battery capacity Battery monitoring Mains monitoring Connectable detector series Number of lines Loops or stub lines 115/230 VAC 150 W VDC max. 5 A 2 x 12 V, 26 Ah yes yes Sinteso TM (FDnet) Number of addresses max. 504 Integrated inputs/outputs Relay output 1 each Remote monitoring alarm / fault Monitored outputs Alarm / fault Horn Programmable inputs/outputs Operating unit Plug-in position for RS232, RS485 serial ports each 2 12 integrated 2 Plug-in position for networking modules 2 Ethernet connection RJ45 1 Operating temperature C Storage temperature C Humidity (no condensation permitted) at T = 25 ±3 C at T = 40 ±2 C Dimensions (W x H x D) Color Housing Cover Protection category (IEC 60529) Approvals VdS LPCB 95 % rel. 93 % rel. 430 x 796 x 160 mm light grey, RAL 7035 pure white, RAL 9010 IP30 G pending 7

8 Details for ordering Type Part no Designation Weight Fire control panels FC2040-AA A5Q Fire control panel (4-loop) kg FC2040-AE A5Q Fire control panel (4-loop) kg FC2040-AG A5Q Fire control panel (4-loop) kg Options Z3B Relay module 250 VAC / 10 A (1 relay) kg FTO2001-A1 A5Q Event printer kg A5Q Replacement printer rolls (10 rolls) kg FTO2005-C1 A5Q Key switch (Kaba) kg FTO2006-B1 A5Q Key switch (nordic) 0,050 kg FHA2007-A1 A5Q Mounting plate kg FCA2002-A1 A5Q RS485 module (isolated) kg FCA2001-A1 A5Q RS232 module (isolated) kg FN2001-A1 A5Q Network module (SAFEDLINK) kg FCI2001-D1 A5Q Fire brigade periphery module kg FH2002-A1 A5Q Housing (Standard) kg FH2003-A1 A5Q Housing (Comfort) kg FCM2006-A1 A5Q Operating add-on (2xLED ind.) kg FCM2007-A1 A5Q Operating add-on (4xLED ind.) kg FCA2009-A1 A5Q Door contact kit kg FCA2010-F1 A5Q Battery kit (9 Volt) (only France) kg A5Q Lithium battery 9 V / 1 Ah (for FCA2010-F1) kg FHA2016-A1 A5Q " mounting kit kg Additional power supply FP2003-A1 A5Q Power supply kit (70 W) kg FP2004-A1 A5Q Power supply kit (150 W) for installation in kg empty housing FP2005-A1 A5Q Power supply kit (150 W) for the cascading kg Batteries FA2003-A1 A5Q Battery (12 V, 7 Ah, VDS, V0) kg FA2004-A1 A5Q Battery (12 V, 12 Ah, VDS, V0) 3,930 kg FA2006-A1 A5Q Battery (12 V, 26 Ah, VDS, V0) kg Siemens Switzerland Ltd Group International Headquarters Gubelstrasse 22 CH-6301 Zug Tel Fax Copyright by Siemens Switzerland Ltd Data and design subject to change without notice. Supply subject to availability. Document no _b_en_-- Manual FS20 Edition Section 1