M2M/IoT Solutions.

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "M2M/IoT Solutions. www.contec.com"

Transcription

1 M2M/IoT Solutions

2 M2M/IoT Solutions TM Hardware Highly Reliable M2M Controllers for Various Solutions M2M Controllers Compact design available on DIN rails Low-power design using a CPU tailored to embedded devices Supports a wide range of ambient temperatures from -20 to +60 C Highly reliable design that eliminates short-lived parts Integrated Type Configurable Type Software & Service Providing software and services to match the system being built Data storage Visualization & Utilization Cell control Area management Sensor measurement Actuator control CONTEC has provided remote monitoring systems for Solar power generation and infrastructure equipment at more than 20,000 sites. For more than 30 years, CONTEC has retained market leadership in the PC-based electronic measurement industry and the factory automation industry. Now, we are proud to present "CONPROSYS," our new M2M/IoT solution. This new solution system enables everything from IoT devices supporting a variety of sensors and fields to data visualization and BI cloud services. "CONPROSYS" is everything you need for accessing the solutions and services developed by CONTEC in the pursuit of simplicity, usefulness, and ease of use. Renewable Energy Smart Agriculture Social Infrastructure Factory Automation Hardware Cloud services Data collection software "M2M Cloud Services" "M2M Data Collection On-premises Software" Support connecting with SCADA systems "OPC Server Software" High-performance HMI software "ACTIVE TOUCH" (trial version) Product Release Road Map Driving development to support new solutions M2M Controller Integrated Type Hardware: 6 models Optional Power Supply: 1 model Software & Service M2M Cloud Data Services HMI Software M2M Data Collection Software M2M Controller Configurable Type CPU Module: 1 model, I/O Module: 9 models Optional Power Supply: 1 model Driver Software Versions Supporting Various Operating Systems CONPROSYS TM Series GUIDE CONPROSYS TM Series GUIDE 02

3 M2M Controllers CONPROSYS devices are available in two types of M2M devices: an integrated type that incorporates a controller and I/O interface functions, or a configurable type whose controller can be expanded by adding I/O module. Controllers are equipped with the control functions and the firmware. CONPROSYS devices have been designed to be easy to install and wire and allow users to construct control scripts even without any specialized knowledge of programming languages. Up to 32 I/O modules can be connected to the CPU module. Up to 32 I/O modules can be stacked onto the CPU module. However, the maximum current consumption for all connected modules must not exceed 3.3A CPU module Up to 32 modules Integrated Type 6 models Integrated type controllers are available in six models with I/O interface functions and communication functions included in the control functions. These devices can be held in place with screws or installed on a DIN rail. Multifunction, wired LAN Digital I/O, wired LAN Multifunction, RS-485 Digital I/O, CAN Multifunction, 920MHz Analog I/O, wired LAN Usable even in severe temperature environments (-20 C to 60 C) CONPROSYS devices support operating temperatures ranging from -20 C to 60 C, allowing for indoor use in severe temperature environments. Equipped with 2 LAN ports for connecting modules together Modules can be daisy-chained together without the use Ethernet HUB. Therefore, data can be relayed from one module to another just by connecting them with a LAN cable. This makes it possible to build a network between modules within a factory at low cost and also makes adding modules to an existing network easy. Daisy-chained modules without a Ethernet HUB Equipped with a mechanism for mounting on a 35mm DIN rail The modules are equipped with a mechanism for mounting on a 35mm DIN rail, which makes it easy to mounted them within a panel. A module can be easily installed and removed just by turning the stopper on the rear on or off. Simply slide modules to install and remove them. Configurable Type CPU: 1 model I/O: 9 models Configurable type modules are available in two types: a type with a CPU model and another with I/O interface functions. Modules with a CPU can be expanded by assembling a combination of the nine models of I/O modules (digital I/O, analog I/O, temperature sensor, and serial communication) to match the application. Stacked units can be installed together on a DIN rail. What's more, modules can be added and replaced while they are installed on the DIN rail. Stack method for easy installation and removal Simply slide modules to install and remove them. This makes it possible to exchange a module while the other modules remain attached to the DIN rail. Modbus/TCP slave function support The "Modbus/TCP slave function," which is the communication protocol standardly used in industrial fields, is supported. This makes it possible to access CONPROSYS devices from controllers such as Modbus/TCP-compatible PLCs. Same Windows API as the F&eIT series Modules can be exchanged while the other modules remain attached to the DIN rail. Devices come with the "API-TOOL," a Windows API that is the same as CONTEC's "F&eIT series" of remote I/O systems with minimal wiring. This makes it possible to create programs in the same development environment as was used for the F&eIT series. (Download service planned.) CPU module Wired LAN CPU I/O module Digital I/O Analog I/O Temperature sensor RS-232C COM RS-422A/485 COM Equipped with task programming function Users can easily set execution processes by combining icons such as those for operations, conditional branching, and data output, just like drawing a flowchart. Equipped with monitoring function The included display components (such as graphs, sliders, and buttons) can be positioned on the screen to check measurement signals on site. 03 CONPROSYS TM Series GUIDE CONPROSYS TM Series GUIDE 04

4 Mastery of Solutions The M2M controller software in the CONPROSYS Series can be used to easily build an environment for collecting and storing data from sensors and controllers. With support for OPC, the worldwide standard industrial protocol, this software makes it possible to communicate with software made by other companies. OPC Server Software Downloadable from the CONTEC website This software uses an OPC server to convert CONPROSYS communication methods into an OPC interface, which is the worldwide standard industrial protocol used in SCADA and similar systems. This makes communication with SCADA software that supports OPC easy. Ethernet SCADA system Ex) Joy Watcher Suite In Touch Lab VIEW etc. M2M Cloud Services M2M Cloud Data Service M2M Data Collection Software Data collection and storage services can be used to transfer data from sensors and controllers to a cloud server in a single operation. Point 1 Easy introduction of M2M services Collecting data from sensors and controllers, and then storing this data on cloud servers, is simple. There is no need for detailed settings. Simply connect to the controller unit to collect the data and transfer it to the server. Point 2 Easy to understand with useful functions Data stored on the server can be viewed on the screen through easy-tounderstand graphs and lists. Point 3 Safe and Advanced security CONTEC's cloud services can be used for communication between sensors/controllers and a cloud server. The cloud services are provided with an SaaS model, so there is no need for the user to prepare the environment or security countermeasures. * To meet the requests of customers, CONTEC develops visualization software for the use and application of data stored on the server. Downloadable from the CONTEC website The M2M data collection software is compatible with on-premise monitoring systems. PLC High-performance HMI Software "ACTIVE TOUCH" Downloadable from the CONTEC website "ACTIVE TOUCH" makes it easy to build screens just by dragging components. Examples of available components include displays, outputs, and data storage. Screen creation using various standard components and support tools, device association (data linking), and complicated control can all be performed in a program-less manner, reducing development time and providing a rich development environment. ACTIVE TOUCH development screen Gallery Original components can be created by changing parameters, and multiple components can be registered as a single component. The gallery can be used to register frequently used components. F&eIT Toolbar Program commands and components are displayed as icons. Page This area is used for designing the screen. Paste components to design the display screen. M2M controllers Converts CONPROSYS interface into OPC interface. Properties area Configure component properties. Data link area The data link area can be used to set the necessary links between data and components when transferring device data to components to be displayed and when outputting component values to devices. This area can also be used to set links when transferring data between components. estep area Set and edit estep here. Switch ACTIVE TOUCH execution screen ACTIVE TOUCH Data Server Point 1 Easy introduction of data collection and storage Data collected from sensors and controllers is stored on a PC on the local network. There is no need to configure detailed settings. Simply install the software to acquire data and store it on the server. Point 2 Viewing stored data on the screen The data stored on the server can be viewed on the screen in a list. Supported OS: Windows 7, 8.1 (32/64 bit) Licensed version Supported OS: Windows 7, 8.1 (32/64 bit) ACTIVE TOUCH Editor (development and execution environment) This software is used to develop and execute systems to run on PCs. It provides the user with rich functions such as monitoring and execution as well as a development environment for creating system screens and configuring settings such as alarms and logging. ACTIVE TOUCH Viewer (execution environment only) * The provided "ACTIVE TOUCH" software is a trial version with limited functionality. The limitations of the trial version are as follows. A maximum of just three pages (display screens) can be created. Communication with general-purpose OPC servers and PLCs is limited to 1 hour after starting. Communication with CONPROSYS and F&eIT OPC servers does not have time limits. * To use "ACTIVE TOUCH" continuously or to increase the number of display screens, purchase the licensed version. To purchase the licensed version, contact CONTEC. ACTIVE TOUCH Viewer can be used to execute (display) the files (project files) for systems built using ACTIVE TOUCH Editor. 05 CONPROSYS TM Series GUIDE CONPROSYS TM Series GUIDE 06

5 Hardware Highly Reliable M2M Controllers for Various Solutions Integrated Type Module The integrated controller features built-in control and I/O interface functions. The control functions included with integrated type controllers allow for standalone data collection. Configurable Type Module Easily connect modules using the stack method. Users are able to combine I/O modules freely and connect them to the CPU module in order to expand the I/O interfaces to better match devices. Multifunction, wired LAN Multifunction, RS-485 Multifunction, 920MHz Model CPS-MC341-ADSC1-111 CPS-MC341-ADSC2-111 CPS-MC341Q-ADSC1-111 LAN 2ch, 10BASE-T/100BASE-TX CPU Module SD card slot USB RS-422A/485 RS-232C 1ch (5-pin), isolated Asynchronous serial transmission (full duplex/half duplex) SD standard compatible, SD memory card slot 1ch (TYPE-A), USB 2.0 standard compatible 2ch (5-pin 2), isolated Asynchronous serial transmission (full duplex/half duplex) 1ch (5-pin), isolated; asynchronous serial transmission (full duplex/half duplex) 1ch (9-pin D-SUB connector), non-isolated; asynchronous serial transmission, 115.2kbps (max.) Model LAN SD card slot USB Wired LAN module CPS-MCS341-DS ch, 10BASE-T/100BASE-TX SD standard compatible, SD memory card slot 1ch (TYPE-A), USB 2.0 standard compatible Digital input 4 (terminal block); isolated, non-voltage input Digital output 2 (terminal block); semiconductor relay output Counter input 2ch (terminal block) *Switching of DI and function; isolated, non-voltage input 1kHz (max.) Analog input 2ch (terminal block) differential input; channel isolation, 0 to 20mA, 12-bit resolution 3G (standard SIM) 920MHz 50kbps/100kbps, to 929.7MHz RS-232C Digital input Digital output SW RTC 1ch (9-pin D-SUB connector); non-isolated, asynchronous serial transmission, 115.2kbps (max.) 4 (terminal block); isolated, non-voltage input 4 (terminal block) *DI switching; semiconductor relay output Power, status, etc. Reset SW, Rotary SW, DIP SW Built-in highly precise RTC Power, status, etc. Input power supply 24VDC SW Reset SW, full duplex/half duplex switching SW RTC Built-in RTC (backup battery not equipped) 44.7 (W) 94.7 (D) (H) Input power supply 12 to 24VDC Mountable to a 35mm DIN rail Weight 250g 188 (W) 78 (D) 30.5 (H) Mountable to a 35mm DIN rail or to a wall using screws Weight 250g 250g Pending Digital I/O, wired LAN Digital I/O, CAN Analog I/O, wired LAN Model CPS-MC341-DS1-111 CPS-MC341-DS2-111 CPS-MC341-A1-111 LAN 2ch, 10BASE-T/100BASE-TX SD card slot SD standard compatible, SD memory card slot RS-422A/485 1ch, isolated; asynchronous serial transmission Digital input 8 (terminal block); isolated, non-voltage input Digital output 8 (terminal block); open-collector (sink) Analog input 8ch (terminal block) single-ended input; bus isolation, ±10V, 16-bit resolution Analog output 2ch (terminal block); bus isolation, ±10V, 16-bit resolution CAN 1ch (9-pin D-SUB connector), isolated; high-speed CAN 1Mbps (max.) shut down SW, Power, status, etc. SW Reset SW, shut down SW, full duplex/half duplex switching SW Reset SW, shut down SW RTC Built-in RTC (backup battery not equipped) Input power supply 12 to 24VDC 188 (W) 78 (D) 30.5 (H) Mountable to a 35mm DIN rail or to a wall using screws Weight 250g Pending 250g 07 CONPROSYS TM Series GUIDE CONPROSYS TM Series GUIDE 08

6 Hardware Highly Reliable M2M Controllers for Various Solutions I/O Modules Digital I/O module RS-232C COM module RS-422A/485 COM module Model CPS-DIO-0808L CPS-DIO-0808BL Digital input 8 photocoupler-isolated inputs 8 photocoupler-isolated inputs Digital output 8 Optocoupler-isolated, open-collector outputs 8 Optocoupler-isolated, open-collector outputs Built-in power supply 12VDC (shared between all inputs and outputs) Power, status, I/O status indicator Power, status, I/O status indicator In development Connectors * CPS-COM-2PC shown in photograph. * CPS-COM-2PD shown in photograph. Mountable to a 35mm DIN rail Mountable to a 35mm DIN rail Weight 200g 200g Analog I/O module Model CPS-AI-1608LI CPS-AO-1604LI Analog input 8ch differential input; 16-bit resolution, ±10V Analog output 4ch current output; 16-bit resolution, 0 to 20mA (sink output) Isolation Bus isolation Bus isolation Power, status In development Power, status Connectors Mountable to a 35mm DIN rail Mountable to a 35mm DIN rail Weight 200g Pending Model CPS-COM-1PC CPS-COM-2PC CPS-COM-1PD CPS-COM-2PD Transmission scheme Power Supplies RS-232C (asynchronous serial transmission) RS-422A/RS-485 asynchronous serial transmission (full duplex/half duplex) No. of channels Data format Parity check 5, 6, 7, or 8 bits; 1, 1.5, or 2 stop bits Even, odd, none Isolation Bus isolation Bus isolation, channel isolation Bus isolation Bus isolation, channel isolation Power, status, Tx, Rx Connectors 9-pin D-SUB connector 2-piece, 3.81mm pitch 10-pin terminal Mountable to a 35mm DIN rail Weight Pending 170g Pending Pending These power supply units are dedicated for use with modules in the CONPROSYS series. Select a power supply that matches the power supply capacity of the organized unit and the power supply environment of the installation location. Temperature sensor module AC-DC power supply unit Model CPS-SSI-4P Model CPS-PWD-15AW12-01 CPS-PWD-90AW24-01 Supported sensor Wiring method Pt100 Three-wire, four-wire No. of channels 4 Isolation Connectors Bus isolation Power, status Input 85 to 264VAC 85 to 264VAC Output 12VDC, 1.3A (max.) 24VDC, 3.8A (max.) Operation: -20 to +70 C Storage: -20 to +75 C 20 to 90%RH 39.0 (W) 80.0 (D) 79.0 (H) Operation: -20 to +70 C Storage: -30 to +85 C 20 to 90%RH 50.0 (W) 90.0 (D) 90.0 (H) Weight 305g 405g * A DC cable and a 3-pin I/O connector are included with the power supply unit. Weight Mountable to a 35mm DIN rail Pending 09 CONPROSYS TM Series GUIDE CONPROSYS TM Series GUIDE 10

7 JAPAN (Headquarters) TAIWAN SINGAPORE CONTEC CO., LTD , Himesato, Nishiyodogawa-ku, Osaka , JAPAN Tel : Fax : TAIWAN CONTEC CO., LTD. 9FL, No. 738, Zhongzheng Road, Zhonghe District, Xinbei TAIWAN Tel : Fax : SINGAPORE CONTEC PTE. LTD. Blk 4010, Ang Mo Kio Ave. 10 #07-01 Techplace I, SINGAPORE Tel : Fax : U.S.A. CONTEC DTx INC Penn Street, Melbourne, FL USA Tel : Fax: CHINA CONTEC (SHANGHAI) CO., LTD. [Main Office] Room 1002, Qilai Building, No. 889, Yishan Road, Shanghai CHINA Tel : Fax: [Beijing Branch Office] Room 1201, Jianwai SOHO 17 No. 39, Dongsanhuanzhong Road, Chaoyang District, Beijing CHINA Tel : Fax:

User Manual. cmt-svr Startup Guide

User Manual. cmt-svr Startup Guide User Manual cmt-svr Startup Guide Table of Contents Chapter 1 Overview... 1 1.1 Specification... 1 1.2 Dimensions... 2 1.3 Connector pin designations... 3 1.4 USB host port and SD card slot... 3 1.5 Ethernet

More information

User Manual. mtv-100 Startup Guide

User Manual. mtv-100 Startup Guide User Manual mtv-100 Startup Guide 0 Table of Contents 1 Specification... 1 1.1 Dimensions... 2 1.2 Connector pin designations... 3 1.3 USB Host port and SD card slot... 3 1.4 Ethernet port... 3 1.5 DIP

More information

16-Port RS232 to USB2.0 High Speed Multi Serial Adapter (w/ Metal Case) Installation Guide

16-Port RS232 to USB2.0 High Speed Multi Serial Adapter (w/ Metal Case) Installation Guide 16-Port RS232 to USB2.0 High Speed Multi Serial Adapter (w/ Metal Case) Installation Guide 1. Introduction Thank you for purchasing this 16-Port RS232 to USB2.0 High Speed Multi Serial Adapter. It is an

More information

JNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410

JNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410 The INTEG is an Ethernet I/O (digital, analog) device that monitors and controls a small set of process signals. functions as both basic I/O for integration with another application or system AND as a

More information

ADAM-4561 1-port Isolated USB to RS-232/422/485 Converter User s Manual

ADAM-4561 1-port Isolated USB to RS-232/422/485 Converter User s Manual ADAM-4561 1-port Isolated USB to RS-232/422/485 Converter User s Manual Part No. 2000456100 Printed in Taiwan Feb. 2001 1.1 Introduction Advantech s ADAM-4561 allows PC users to connect their serial devices

More information

Optimize your simple machines... Modicon M218 Selection Guide

Optimize your simple machines... Modicon M218 Selection Guide Optimize your simple machines... Modicon M218 Selection Guide Compact Solution for Simple Machines Optimized Logic Controller Modicon M218 With intelligent software platform, specialized functional s,

More information

User manual Compact Web PLC WP240 series IEC-line

User manual Compact Web PLC WP240 series IEC-line User manual Compact Web PLC WP240 series IEC-line update: 09-01-2014 IEC-line by OVERDIGIT overdigit.com 1. General description The WP240 device is a PLC, programmable in IEC61131-3 language using CoDeSys

More information

Temperature & Humidity SMS Alert Controller

Temperature & Humidity SMS Alert Controller Temperature & Humidity Alert Controller METERS 3 simple steps starting the unit: Insert the SIM card Plug in the sensors connectors Connect the AC power cord. Specifications: AC 90~260V Auto Select Internal

More information

SIMATIC S7-1200. It s the Interplay that makes the difference. Siemens AG 2010. All Rights Reserved.

SIMATIC S7-1200. It s the Interplay that makes the difference. Siemens AG 2010. All Rights Reserved. SIMATIC S7-1200 It s the Interplay that makes the difference SIMATIC S7-1200 Controller SIMATIC S7-1200 CPUs CPU 1211C 3 configurations per CPU Dimensions W x H x D (mm) CPU 1212C CPU 1214C DC/DC/DC, AC/DC/RLY,

More information

M90-19-R5. RS232 to RS422/RS485 Isolated Universal Converter. 1. Introduction. 2. Function diagram

M90-19-R5. RS232 to RS422/RS485 Isolated Universal Converter. 1. Introduction. 2. Function diagram to RS422/RS485 Isolated Universal Converter 1. Introduction The converts serial data from the standard to either RS422 or RS485. Features: Universal converter can be used with both and other manufacturer

More information

Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter

Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter Serial Interface One RS-232 port and one RS-422/485 port to 10/Base- TX Media Conversion Cost effective solutions of RS-232/ RS-422/ RS-485

More information

iologik E1200 Series Ethernet remote I/O with 2-port Ethernet switch Introduction Remote I/O

iologik E1200 Series Ethernet remote I/O with 2-port Ethernet switch Introduction Remote I/O iologik E1200 Series Ethernet remote I/O with 2-port Ethernet switch User-definable Modbus/TCP Slave addressing 2-port Ethernet switch for daisy-chain topologies Save time and wiring cost with peer-to-peer

More information

USB to RS-232/422/485 Isolated Converter. Quatech Model SSU2-400I Operation Manual

USB to RS-232/422/485 Isolated Converter. Quatech Model SSU2-400I Operation Manual USB to RS-232/422/485 Isolated Converter Quatech Model SSU2-400I Operation Manual First Edition, Jun 2008 1 Table of Contents 1. Introduction 2 2. Package checklist 3 3. Product Specification 4 4. Product

More information

Smart Energy Control for Building Management & Production Plant

Smart Energy Control for Building Management & Production Plant Multipoint Temperature SMS NET Data Logger GSMS NET HV Smart Energy Control for Building Management & Production Plant Max. 8 digital temperature sensors Data communication via SMS and Ethernet Integra

More information

ModBus Server - KNX. Gateway for integration of KNX equipment into Modbus (RTU and TCP) control systems.

ModBus Server - KNX. Gateway for integration of KNX equipment into Modbus (RTU and TCP) control systems. IntesisBox ModBus Server - KNX Gateway for integration of KNX equipment into Modbus (RTU and TCP) control systems. Integrate KNX based lighting control into your SCADA, BMS, PLC "talking" Modbus. Master

More information

NC-12 Modbus Application

NC-12 Modbus Application NC-12 Modbus Application NC-12 1 Table of Contents 1 Table of Contents... 2 2 Glossary... 3 SCADA...3 3 NC-12 Modbus in general... 3 4 Entire system... 4 4.1 PFC to PC connection alternatives...4 4.1.1

More information

Zigbee RS-232/DI/DO/AI Adapter

Zigbee RS-232/DI/DO/AI Adapter ZA-L2 Low Power External 2 dbi Dipole Antenna Zigbee RS-232/DI/DO/AI Adapter User manual for ZA-L2 and ZA-H5 models Adapter Model ZA-H5 High Power External 5 dbi Dipole Antenna Comparison 1.Packing Contents

More information

SMART DATA LOGGER. Functional Modules GPRS. Ethernet SMS. Programmable I/O Channels. Integrated Numeric LED. Data Logger Series

SMART DATA LOGGER. Functional Modules GPRS. Ethernet SMS. Programmable I/O Channels. Integrated Numeric LED. Data Logger Series SMART DATA LOGGER Functional Modules GPRS Standard GSM Quad Band Module Optional 3G Mobile Module Supports UDP and TCP Ethernet 100M Ethernet Port Data Upload in Server or Client Mode Supports UDP and

More information

SCADA and Monitoring for Solar Energy Plant

SCADA and Monitoring for Solar Energy Plant SCADA and Monitoring for Solar Energy Plant Segment: Industry Country: Thailand Author: Ranon Satitpanyapan Products: NI LabVIEW with LabVIEW Real-Time Module crio Real-Time controller 8 slot with 16 current

More information

USR-TCP232-300 Hard version: V2.0 File version: V1.1 2011-8-17

USR-TCP232-300 Hard version: V2.0 File version: V1.1 2011-8-17 Serial Device Server - RS232/RS485 to Ethernet converter USR-TCP232-300 Hard version: V2.0 File version: V1.1 2011-8-17 Serial Device Server - RS232/RS485 to Ethernet converter is an Equipment for convert

More information

LM058 Bluetooth v2.0, v2.1 RS232 Serial Adapter - SMA Connector Standalone (With Embedded Bluetooth v2.0 / v2.1 Stack)

LM058 Bluetooth v2.0, v2.1 RS232 Serial Adapter - SMA Connector Standalone (With Embedded Bluetooth v2.0 / v2.1 Stack) Bluetooth v.0, v. RS Serial Adapter - SMA Connector Revised /DEC/0 mm mm mm Features Bluetooth v.0, v. wireless technology dbm Tx Power and - dbm Rx Sensitivity Serial (RS) interface Serial Port Profile

More information

Zlinx Wireless I/O. Peer-to-Peer and Modbus I/O B&B ELECTRONICS PRODUCT INFORMATION

Zlinx Wireless I/O. Peer-to-Peer and Modbus I/O B&B ELECTRONICS PRODUCT INFORMATION Modular, Customizable Wire Replacement 128 / 256 Bit AES Encryption Software Selectable RF Transmit Power Software Selectable Over-the-air Data Rate Modbus ASCII /RTU Compatible Wide Operating Temperature

More information

Universal isolated USB to serial converter and RS232 to RS485/422 converter.

Universal isolated USB to serial converter and RS232 to RS485/422 converter. GS180 Universal isolated USB to serial converter and RS232 to RS485/422 converter. Multifunctional unit, converts: USB RS232/485/422 or RS232 RS485/422 Powered via USB port or external power adaptor Compact

More information

SB485,SB485L,SB232. USB to RS485, RS422 and RS232. industrial converters. With galvanic isolation. 18. August 2014 w w w. p a p o u c h.

SB485,SB485L,SB232. USB to RS485, RS422 and RS232. industrial converters. With galvanic isolation. 18. August 2014 w w w. p a p o u c h. USB to RS485, RS422 and RS232 industrial converters With galvanic isolation 18. August 2014 w w w. p a p o u c h. c o m SB485,SB485L,SB232 Datasheet Created: 1/19/2005 Last update: 8/18/2014 12:38 Number

More information

Alcalde # 1822 Col. Miraflores C.P. 44270 Guadalajara, Jal. Mexico MX 01 (33) 3854-5975 y 3823-4349 USA 001 (619)- 884-94-93 (San Diego, CA.

Alcalde # 1822 Col. Miraflores C.P. 44270 Guadalajara, Jal. Mexico MX 01 (33) 3854-5975 y 3823-4349 USA 001 (619)- 884-94-93 (San Diego, CA. Tu Sitio de Automatización! Description Modbus is very wide known protocol in the industrial manufacturing and environment monitoring fields. It is suit master-slave or query-response distributed I/O applications.

More information

Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2

Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2 Type code Ident no. 1545065 Number of channels 2 Dimensions (W x L x H) 108 x 145 x 77.5 mm CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps Male

More information

PM Channel Modbus Pyrometer Hub Operator s Guide

PM Channel Modbus Pyrometer Hub Operator s Guide PM180 6-Channel Modbus Pyrometer Hub Operator s Guide The PM180 is a temperature indicator, data logger, alarm unit and configuration tool for Calex infrared temperature sensors. It is compatible with

More information

ENET-710. ENET-710 - Ethernet Module ENET-710 JAN / 06 FOUNDATION

ENET-710. ENET-710 - Ethernet Module ENET-710 JAN / 06 FOUNDATION ENET-710 ENET-710 - Ethernet Module JAN / 06 ENET-710 FOUNDATION E N E T 7 1 0 ME smar www.smar.com Specifications and information are subject to change without notice. Up-to-date address information is

More information

Web Datalogger. Unit RS232C. General-purpose modem RS485. IP address search screen

Web Datalogger. Unit RS232C. General-purpose modem RS485. IP address search screen Equipment, facilities, and service networks for data collection/logging, data transfer via e-mail/website, and system streamlining can be established without special knowledge. Energy saving system in

More information

IntesisBox. BACnet/IP Server - LON. Integrate LonWorks devices or systems into BACnet control systems. IntesisBox RS232. Only needed for configuration

IntesisBox. BACnet/IP Server - LON. Integrate LonWorks devices or systems into BACnet control systems. IntesisBox RS232. Only needed for configuration IntesisBox Server - LON Gateway for integration of LON devices into BACnet control systems Integrate LonWorks devices or systems into BACnet control systems. BACnet IP client Ethernet LonWorks TP/FT-10

More information

TRP-C39 User s Manual

TRP-C39 User s Manual TRP-C39 User s Manual Fiber to RS-232/422/485 Isolated Converter, ST Multi-Mode Printed Feb. 2007 Rev 1.0 Trycom Technology Co.,Ltd 1F, No.2-11,Sihu street,yingge Township, Taipei, Taiwan ROC Tel: 886-2-86781191,

More information

T3 Series. General Purpose IO for Integrators

T3 Series. General Purpose IO for Integrators General Purpose IO for Integrators -1- TABLE OF CONTENTS Table of Contents Technical Data 3 Standard Operation 4 Inputs 4 Outputs 4 Analog Output Calibration 4 Bandrate 4 Master Timer Clock Function for

More information

Keep Automation Simple

Keep Automation Simple Keep Automation Simple and keep control on the total cost of ownership with Control Technology Inc. A complete and powerful family : Robust industrial PLC for process control and machine automation Smart

More information

SNAP PAC Redundancy Option Kit

SNAP PAC Redundancy Option Kit SNAP PAC Redundancy Option Kit Features Standalone arbiter monitors and controls the active and backup status of redundant controllers Redundancy power switch controlled by the arbiter enables remote rebooting

More information

SOLARCARE SERIES PRODUCT AND APPLICATION GUIDE

SOLARCARE SERIES PRODUCT AND APPLICATION GUIDE SOLARCARE SERIES PRODUCT AND APPLICATION GUIDE for solar energy management LEATEC Delivering Solutions for Energy Management SOLAR ENERGY DATA CENTER BUILDING 4 to8 String Monitoring with 0.% Accuracy

More information

LAUREL. Laureate Quadrature Encoder Position & Rate Meter ELECTRONICS, INC. Features. Description

LAUREL. Laureate Quadrature Encoder Position & Rate Meter ELECTRONICS, INC. Features. Description LAUREL ELECTRONICS, INC. Laureate Quadrature Encoder Position & Rate Meter Features Accepts low-level differential or single-ended 5V logic level outputs from quadrature encoders Quadrature count x1, x2

More information

NetBiter TM Embedded Web Server, Alarm Interface and Data Logger

NetBiter TM Embedded Web Server, Alarm Interface and Data Logger Product Sheet SW4.02 Software Type NetBiter TM NetBiter TM Embedded Web Server, Alarm Interface and Data Logger NetBiter TM is an embedded web-server, alarm interface and data logger for Modbus devices.

More information

Straton and Zenon for Advantech ADAM-5550. Copalp integrates the straton runtime into the ADAM-5550 device from Advantech

Straton and Zenon for Advantech ADAM-5550. Copalp integrates the straton runtime into the ADAM-5550 device from Advantech Straton and Zenon for Advantech ADAM-5550 Copalp integrates the straton runtime into the ADAM-5550 device from Advantech Project Introduction: Programmable Application Controllers (PAC) are powerful and

More information

Digital/Analogue Signal Converters/Multiplexers Section F

Digital/Analogue Signal Converters/Multiplexers Section F Section F The conversion of Analogue signals to digital is an important part of many control systems. So is the conversion of serial data between various standards (RS, RS485 and RS4 for example). www.weidmüller.com.au

More information

IntesisBox Modbus Server Fidelio IP

IntesisBox Modbus Server Fidelio IP IntesisBox Server Fidelio IP Gateway for integration of Micros Fidelio Ho management system into (RTU and TCP) enabled control systems. Integrate your Micros Fidelio Ho management system into your master

More information

Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter

Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter / S15 / Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter Serial Interface One RS-232 port and one RS-422/485 port to one Base-FX Media Conversion Cost effective solutions of RS-232/ RS-422/

More information

Designed for the needs of automation, telecommunications, remote supervision, and monitoring

Designed for the needs of automation, telecommunications, remote supervision, and monitoring - Programmable automation controller (PAC) MADE IN EU is a series of industrial computers which you can easily adapt to your needs by choosing from the available options. Energy-efficient ARM11 700 MHz

More information

TX2123 RS485 TO ETHERNET ADAPTOR

TX2123 RS485 TO ETHERNET ADAPTOR TX2123 RS485 TO ETHERNET ADAPTOR Converts Datacomms between fibre optic Modbus TCP over Ethernet and hard-wired copper Modbus RTU over RS485 Fibre Optic MODBUS TCP/ IP Ethernet Copper MODBUS RTU RS485

More information

Touch HMI Devices. The Best Choice for Building/Factory/Machine/Home Automation. Introduction. Features. Touch HMI Devices.

Touch HMI Devices. The Best Choice for Building/Factory/Machine/Home Automation. Introduction. Features. Touch HMI Devices. The Best Choice for Building/Factory/Machine/Home Automation Introduction ICP DAS provides two types of touch HMI devices, the TPD series and the VPD series. The TPD series is designed for home/building

More information

Page 1 / 14 Groupe MOBILITECHMIOSBOX Technical Specification MWP-DT1010. Technical specifications

Page 1 / 14 Groupe MOBILITECHMIOSBOX Technical Specification MWP-DT1010. Technical specifications Page 1 / 14 Technical specifications Page 2 / 14 SUMMARY 1. GENERAL OVERVIEW 1.1 MIOS and the remote management 1.2 The MIOSBOX range 1.3 Synthesis of MIOSBOX s specificities 2. DETAILED PRESENTATION OF

More information

Communication interface UT-4DR

Communication interface UT-4DR Roger Access Control System Communication interface UT-4DR Firmware version : 1.0.0.58 Document version: Rev. A Contents 1. Description and specification... 3 1.1 Characteristics... 3 1.2. Using the interface

More information

Electronic Control Devices The European Product Catalogue 2007

Electronic Control Devices The European Product Catalogue 2007 FX14 Field Controller (1/4) FX14 Field Controller The FX14 is an equipment field controller in the Facility Explorer range of products. The controller is designed specifically for commercial Heating, Ventilating,

More information

EDI Distributor Control Interface Wiring and Setup Instructions

EDI Distributor Control Interface Wiring and Setup Instructions Universal I/O EDI Distributor Control Interface Wiring and Setup Instructions EDI UNIVERSAL I/O INTERFACE MODULE The only interface needed for EDI-V5 controls Network compatible with all older EDI controls

More information

ELC Distributed I/O Adapters

ELC Distributed I/O Adapters 3 The is a PROFIBUS DP Slave Communication Module. To ensure correct installation and operation of the product, please read this operation information below carefully before using it. is a PROFIBUS DP

More information

SNAP-SCM-PROFI Communication Module

SNAP-SCM-PROFI Communication Module SNAP-SCM-PROFI Communication Module Features Single isolated port with built-in DB-9 connector Baud rates to 1.5 MBaud Works with the SNAP PAC System Up to eight SNAP-SCM-PROFI modules per rack 30-month

More information

Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter

Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter ICS-2 S15 Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter Cost Effective Solution for RS-232 / RS-422 / RS-485 to Industrial Ethernet Application PLANET ICS-210x series Smart Media Converter

More information

ABB Drives. User s Manual HTL Encoder Interface FEN-31

ABB Drives. User s Manual HTL Encoder Interface FEN-31 ABB Drives User s Manual HTL Encoder Interface FEN-31 HTL Encoder Interface FEN-31 User s Manual 3AUA0000031044 Rev B EN EFFECTIVE: 2010-04-06 2010 ABB Oy. All Rights Reserved. 5 Safety instructions

More information

Standard Cables (Without electromagnetic brake, with electromagnetic brake) CC010ES-2. 1 m CC020ES-2. 2 m CC030ES-2. 3 m CC050ES-2.

Standard Cables (Without electromagnetic brake, with electromagnetic brake) CC010ES-2. 1 m CC020ES-2. 2 m CC030ES-2. 3 m CC050ES-2. Motorized Actuators Motor Cables EZS /EZS for Clean Room Use This cable is a dedicated cable for connecting the linear slide of the EZS Series and EZS Series for Clean Room Use with the controller. Use

More information

ABB Instrumentation. Universal Process Controller COMMANDER 100. Specification DataFile. COMMANDER 100 the-easy-to use 1

ABB Instrumentation. Universal Process Controller COMMANDER 100. Specification DataFile. COMMANDER 100 the-easy-to use 1 COMMANDER Universal Process Controller Specification DataFile PID controller with one shot autotune single loop, heat/cool and ramp/soak as standard Quick code, front face or PC configuration easy commissioning

More information

4.6. USB to RS-232/422/485 Converters

4.6. USB to RS-232/422/485 Converters to /22/85 Converters Converters, Repeaters and Hubs to /22/85 Converters I-750.. to /22/85 Converters Introduction The I-750 contains a Windows serial com port via it's connection and is compatible with

More information

IOVU-571N ARM-based Panel PC

IOVU-571N ARM-based Panel PC IOVU-571N ARM-based Panel PC Features RISC-based Panel PC IOVU-57N Application Dimensions Ordering Information Specifications ARM-based Panel PC IOVU-571N Serial IOVU software support Packing List Options

More information

WattmonPRO. Remote Monitoring & Control Platform. WattmonPRO Data Sheet. Features

WattmonPRO. Remote Monitoring & Control Platform. WattmonPRO Data Sheet. Features WattmonPRO Remote Monitoring & Control Platform Applications Solar/Wind Energy Monitoring Battery Monitoring Grid-Tie inverter performance monitoring Water pumping and automatic tank level control Weather

More information

INSTRUCTION MANUAL. V1.3x A

INSTRUCTION MANUAL. V1.3x A INSTRUCTION MANUAL V1.3x A INTRODUCTION... 3 CONNECTIONS AND INSTALLATION... 4 MECHANICAL INSTALLATION... 4 ATTACHING AND DETACHING THE FRONT COVER... 8 ATTACHING AND DETACHING THE HMI... 9 ELECTRICAL

More information

Universal Relay Family

Universal Relay Family Universal Relay Family Overview The Universal Relay Family The engine for substation/industrial automation G60 - Generator Protection System G30 - Generator Protection System (basic) D60 - Line Distance

More information

Think Automation and beyond... IDEC WindSRV. KEPServerEX OPC Server

Think Automation and beyond... IDEC WindSRV. KEPServerEX OPC Server Think Automation and beyond... IDEC WindSRV KEPServerEX OPC Server Direct connectivity Linking your client applications with IDEC PLCs WindSRV SCADA Application Master Pentra PLC Datalink Protocol Ethernet

More information

Introduction to Remote I/O

Introduction to Remote I/O Introduction to Remote I/O Moxa s remote I/O modules are compact and highly reliable, and can be easily connected to a broad array of analog and digital I/O devices. Moxa s remote I/O solutions support

More information

I/O MODULES AND CONVERTERS Input/Output, Control, Data-logging, Conversion

I/O MODULES AND CONVERTERS Input/Output, Control, Data-logging, Conversion I/O MODULES AND CONVERTERS Input/Output, Control, Data-logging, Conversion Modules and converters can be used in many types of applications as: input modules (analog and logic), radio and serial transmitters,

More information

Application Note. Positioning with Dimetix distance sensor and SEW inverter FLS-C

Application Note. Positioning with Dimetix distance sensor and SEW inverter FLS-C Application Note AN2020 Positioning with Dimetix distance sensor and SEW inverter FLS-C Abstract This document describes how to use the FLS-C sensor in a positioning application in conjunction with a SEW

More information

Model: DC-A2IO Advanced HVAC Controller

Model: DC-A2IO Advanced HVAC Controller Model: DC-A2IO Advanced HVAC Controller Job Name: Schedule Reference: Date: DC-A2IO Advanced HVAC Controller Package PAC-IF01 M-Net Adapter AL2-14MR-D α2 Simple Application Controller Accessories AL2-2DA

More information

DDP SERIES DC SUPPLIES

DDP SERIES DC SUPPLIES DDP SERIES DC SUPPLIES DDP SERIES: 3kW - 10kW Key features: 3kW to 10kW Models 2U Compact Form Factor Voltage Ranges up to 1200 Vdc Current Ranges up to 500 Adc High-Speed Precision Metering Active Parallel

More information

TDC 2000 TDC Universal Control Network UCN. Distributed Control Systems for Industrial Automation. Honeywell

TDC 2000 TDC Universal Control Network UCN. Distributed Control Systems for Industrial Automation. Honeywell TDC 2000 TDC 3000 Universal Control Network UCN Distributed Control Systems for Industrial Automation Honeywell Product PDF Presented by DCScenter.com For Product Needs: Email: sales@dcscenter.com Call:

More information

SGD 43-A 4.3 PanelPilotACE Compatible Display

SGD 43-A 4.3 PanelPilotACE Compatible Display is a 4.3 capacitive touch display designed for use with PanelPilotACE Design Studio, a free drag-and-drop style software package for rapid development of advanced user interfaces and panel meters. The

More information

Automated System Accessories

Automated System Accessories Weatherford s automated systems accessory components are used to expand input/ output (I/O) capacity, meet power requirements, provide communications connectivity, and supply the instrumentation interface

More information

How to use KEPServerEX OPC Server (Kepware) with iologik 4000 (Modbus TCP/IP NA-4010 and Modbus Serial NA-4020/NA-4021)

How to use KEPServerEX OPC Server (Kepware) with iologik 4000 (Modbus TCP/IP NA-4010 and Modbus Serial NA-4020/NA-4021) with iologik 4000 (Modbus TCP/IP NA-4010 and Modbus Serial NA-4020/NA-4021) Alex Chen, Senior Engineer, Moxa Technical Support Dept. In this Technical Note, we cover the following topics: 1. How to export

More information

EasyIO FG Series User Reference v1.3. EasyIO FG Series DDC User Reference

EasyIO FG Series User Reference v1.3. EasyIO FG Series DDC User Reference EasyIO FG Series DDC User Reference Document Change Log 1 st April 2013 Document created. 7 th July 2013 Correct mistakes and typo error. 4 th August 2013 Restore Factory settings 10 th Sept 2013 Added

More information

NETWORK ENABLED EQUIPMENT MONITOR

NETWORK ENABLED EQUIPMENT MONITOR NETWORK ENABLED EQUIPMENT MONITOR Remotely Monitor Sensors over the Internet Connect Sensors to the Web to Remotely Monitor Equipment, Processes or Other Applications A Complete, Easy to Deploy, Stand-Alone

More information

Modbus Server SAMSUNG Air Conditioners

Modbus Server SAMSUNG Air Conditioners IntesisBox Server SAMSUNG Air Conditioners Gateway for monitoring and control of Samsung Air Conditioning Systems from any master device TCP or RTU (BMS, PLC, SCADA, HMI, TouchPanel ) Master TCP Master

More information

Application/Connection Examples

Application/Connection Examples This Quick Start Guide is designed to familiarize the user with the connection and configuration of the DTS-305 DIN rail mounted single / 3 phase power & energy meter with RS-485 or TCP communications.

More information

Smart Embedded Systems for Solar Energy Stations. Copyright 2016 Axiomtek Co., Ltd. All Rights Reserved

Smart Embedded Systems for Solar Energy Stations. Copyright 2016 Axiomtek Co., Ltd. All Rights Reserved Smart Embedded Systems for Solar Energy Stations Copyright 2016 Axiomtek Co., Ltd. All Rights Reserved Abstract In order to mitigate the effects of global warming, many countries have made ambitious plans

More information

RS-422/485 to USB Serial Adapter ICUSB422IS

RS-422/485 to USB Serial Adapter ICUSB422IS RS-422/485 to USB Serial Adapter ICUSB422IS FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

More information

USER MANUAL. Longo programmable controller LPC-2.C05 module. Version 4

USER MANUAL. Longo programmable controller LPC-2.C05 module. Version 4 USER MANUAL Longo programmable controller LPC-2.C05 module Version 4 SMARTEH d.o.o. / Trg tigrovcev 1 / 5220 Tolmin / Slovenia / Tel.: +386(0) 388 44 00 / e-mail: info@smarteh.si / www.smarteh.si Written

More information

The GSM Commander can monitor and control your equipment and provide you with realtime 2-way communication via SMS, GPRS and voicecall.

The GSM Commander can monitor and control your equipment and provide you with realtime 2-way communication via SMS, GPRS and voicecall. Datasheet GSM Commander Get the benefit of total control & peace of mind for your remote sites or equipment. Our SmartSetup computer software with point-and-click features enables you to create your own

More information

2-Port RS232/422/485 Combo Serial to USB2.0 Adapter (w/ Metal Case and Screw Lock Mechanism) Installation Guide

2-Port RS232/422/485 Combo Serial to USB2.0 Adapter (w/ Metal Case and Screw Lock Mechanism) Installation Guide 2-Port RS232/422/485 Combo Serial to USB2.0 Adapter (w/ Metal Case and Screw Lock Mechanism) Installation Guide 1. Introduction Thank you for purchasing this 2-Port RS232/422/485 Combo Serial to USB Adapter.

More information

RSC232 Communication Converter

RSC232 Communication Converter RSC232 Communication Converter Installation and Operation Manual LIMITED WARRANTY The manufacturer offers the customer a 24-month functional warranty on the instrument for faulty workmanship or parts from

More information

1 Serial RS232 to Ethernet Adapter Installation Guide

1 Serial RS232 to Ethernet Adapter Installation Guide Installation Guide 10/100 Mbps LED (amber color ) Link/Activity LED (green color ) 1. Introduction Thank you for purchasing this 1-port RS232 to Ethernet Adapter (hereinafter referred to as Adapter ).

More information

Quick Installation. A Series of Intelligent Bar Code Reader with NeuroFuzzy Decoding. Quick Installation

Quick Installation. A Series of Intelligent Bar Code Reader with NeuroFuzzy Decoding. Quick Installation Quick Installation A Series of Intelligent Bar Code Reader with NeuroFuzzy Decoding This chapter intends to get your new FuzzyScan scanner working with your existing system within minutes. General instructions

More information

TELEDYNE HASTINGS INSTRUMENTS

TELEDYNE HASTINGS INSTRUMENTS TELEDYNE HASTINGS INSTRUMENTS THCD 100 Self contained display for flow meter/controller and pressure transducers FEATURES 16-Bit Resolution ± 0.2% Reading +1 Digit Accuracy 0-5 VDC Setpoint via Front Panel

More information

IntesisBox Modbus Server SAMSUNG Air Conditioners

IntesisBox Modbus Server SAMSUNG Air Conditioners IntesisBox Modbus Server SAMSUNG Air Conditioners Gateway for monitoring and control of Samsung NASA compatible Air Conditioning Systems from any Modbus master device TCP or RTU (BMS, PLC, SCADA, HMI,

More information

ZC-24DO CANopen I/O Module: 24 Digital Outputs

ZC-24DO CANopen I/O Module: 24 Digital Outputs Z-PC Line EN ZC-24DO CANopen I/O Module: 24 Digital Outputs Installation Manual Contents: - General Specifications - Technical Specifications - Installation Rules - Electrical connections - DIP-switches

More information

Bluetooth HC-06 with serial port module Easy guide

Bluetooth HC-06 with serial port module Easy guide 1 Bluetooth HC-06 with serial port module Easy guide This manual consists of 3 parts: PART 1. Overview of Bluetooth HC-06 module with serial port. PART 2. Installing Bluetooth HC-06 module with Bolt 18F2550

More information

AVL Tracking System TR-600

AVL Tracking System TR-600 AVL Tracking System TR-600 V 1.0 Globalsat Technology Corporation 16F., No. 186, Jian-Yi Road, Chung-Ho City, Taipei Hsien 235, Taiwan Tel: 886.2.8226.3799/ Fax: 886.2.8226.3899 service@globalsat.com.tw

More information

Programmable Relays. ZEN Series. ZEN Programmable Relays. Applications

Programmable Relays. ZEN Series. ZEN Programmable Relays. Applications Programmable Relays ZEN Series Relay, Timer, Counter, and Time Switch Functions Weekly Timer and Calendar Timer Functions Twin Timer Function (Separate ON/OFF Times) Two Analog Input Channels (DC Models

More information

T a b l e o f C o n t e n t s

T a b l e o f C o n t e n t s w w w. g e n t e c h e a l t h c a r e. c o m M E D I C A L M O N I T O R I N G, A L A R M A N D C O N T R O L S Y S T E M S I n t e r n a t i o n a l E d i t i o n Technology for a Better Future Company

More information

INSTRUCTION SHEET. Eaton Logic Controller PROFIBUS DP Distributed I/O Adapter Module. [Applicable Distributed I/O Adapter Module] ELC-CAPBDP

INSTRUCTION SHEET. Eaton Logic Controller PROFIBUS DP Distributed I/O Adapter Module. [Applicable Distributed I/O Adapter Module] ELC-CAPBDP 2010-12-10 5012603601-ECB1 Eaton Logic Controller PROFIBUS DP Distributed I/O Adapter Module INSTRUCTION SHEET [Applicable Distributed I/O Adapter Module] ELC-CAPBDP IL05004009E 002-1215820-02 Thank you

More information

WinCon-8000. Programmable Automation. Controller

WinCon-8000. Programmable Automation. Controller Programmable Automation Controller Introduction The is a leading edge embedded platform with Intel Strong ARM CPU running the Windows CE.NET operating system. When compared to the standard Windows OS,

More information

MLC 9000+ TM Maximum Productivity and Versatility for Control without Compromise!

MLC 9000+ TM Maximum Productivity and Versatility for Control without Compromise! Data Sheet Maximum Productivity and Versatility for Control without Compromise! Basic Bus Communication Module DESCRIPTION The Basic Bus Communication Module (BCM) is part of the MLC 9000+ DIN rail mount

More information

Using Modbus Controls For EC Fans to Reduce HVAC Energy Consumption. By Vincenzo Nuzzi, Engineer, Rosenberg GmbH

Using Modbus Controls For EC Fans to Reduce HVAC Energy Consumption. By Vincenzo Nuzzi, Engineer, Rosenberg GmbH Using Modbus Controls For EC Fans to Reduce HVAC Energy Consumption By Vincenzo Nuzzi, Engineer, Rosenberg GmbH Using Modbus Controls For EC Fans to Reduce HVAC Energy Consumption By Vincenzo Nuzzi, Engineer,

More information

IntesisBox Modbus Server - LON

IntesisBox Modbus Server - LON IntesisBox Server - LON Gateway for integration of LON devices into enabled control systems. Integrate Air Conditioning from the main manufacturers (DAIKIN, Mitsubishi Electric, Mitsubishi Heavy Industries,

More information

NICOLAUDIE-STICK-KE-1

NICOLAUDIE-STICK-KE-1 For the complete line of specialtyled products, visit us online at barronltg.com or call 800.533.3948. Model: Date: Accessories: Job Name: Type: NICOLAUDIE-STICK-KE-1 This complete stand alone wall-mounted

More information

Power Supply Input voltage 20.4VDC to 28.8VDC with less than 10% ripple Max. current consumption See Note 1

Power Supply Input voltage 20.4VDC to 28.8VDC with less than 10% ripple Max. current consumption See Note 1 Vision OPLC V130-33-TR20 Technical Specifications The Unitronics V130-33-TR20 offers the following onboard I/Os: 12 Digital Inputs, configurable via wiring to include 2 Analog (current/voltage) and 3 HSC/Shaft-encoder

More information

S7-200 Micro PLCs. The model description indicates the type of CPU, the power supply, the type of input, and the type of output.

S7-200 Micro PLCs. The model description indicates the type of CPU, the power supply, the type of input, and the type of output. S7-200 Micro PLCs The S7-200 Micro PLC is the smallest member of the SIMATIC S7 family of programmable controllers. The central processing unit (CPU) is internal to the PLC. Inputs and outputs (I/O) are

More information

H.264 2M Multi-Profile Professional Network Cameras

H.264 2M Multi-Profile Professional Network Cameras H.264 2M Multi-Profile Professional Network Cameras Quick Start Guide 2012 Jan. Table of Contents 1. System Requirements... 3 2. Physical Installation... 4 2.1 Outdoor IR & Dome Type Cameras... 4 2.1.1

More information

Telephone- and leased line modem for industrial applications TD-36

Telephone- and leased line modem for industrial applications TD-36 Telephone- and leased line modem for industrial applications TD-36 Modem for industrial PSTN- and leased line applications The TD-36 is an analogue V.34 PSTN modem as well as an industrial 2-wire leased

More information

INSTRUCTION SHEET. Eaton Logic Controller Ethernet Distributed I/O Adapter Module. [Applicable Distributed I/O Adapter Module] ELC-CAENET

INSTRUCTION SHEET. Eaton Logic Controller Ethernet Distributed I/O Adapter Module. [Applicable Distributed I/O Adapter Module] ELC-CAENET 2010-12-03 5011696801-ETP1 Eaton Logic Controller Ethernet Distributed I/O Adapter Module INSTRUCTION SHEET [Applicable Distributed I/O Adapter Module] ELC-CAENET IL05006001E 002-1214120-01 Thank you for

More information

CLIPSAL Training. Introduction to the Conext Combox

CLIPSAL Training. Introduction to the Conext Combox CLIPSAL Training Introduction to the Conext Combox Clipsal Australia Energy Efficiency August 2010 Conext ComBox Applications > Residential Solar with Battery Backup > Commercial Solar with Battery Backup

More information