FC722 Fire control panel

Transcription

1 FC722 Fire control panel Series FS720 (IP5) Cerberus PRO Compact, prefabricated microprocessor-controlled fire control panel for the connection of up to 252 addresses Fire control panel can be used as stand-alone version or networked Up to 64 stations (fire control panels and fire terminals) can be connected in one network Integrated emergency operation function Redundant network node, degrade operation according to EN 54 Fast Ethernet interface for heterogeneous network Integrated user-friendly operating unit Optional printer, key switch, LED indicators Slots for RS232, RS45 serial ports Emergency power supply for up to 72 h emergency power time Detection and automatic read-in (auto configuration) of all C-NET devices, providing immediate simple operation Processes signals from the Cerberus PRO FD720 detector series Floor repeater devices, alarm devices and mimic displays in the detector loop (C-NET) Flexible programming of complex applications and controls Stored data can be uploaded via remote access Firmware download of all processor controlled control panel components

2 System overview FC722 Repeater FN2002 Cluster (C-WEB/SAFEDLINK) FC722 Fire control panel FT724 Remote access Engineering Tool, Operating Tool FDM233-Ex Explosionhazard area OOH740-A9-Ex Detection line collective Siemens, TM Synova SynoLINE300 or SynoLINE600 24VDC ext. Transmission of an alarm signal Transmission of a fault signal FT200/FT20 Floor repeater terminal / Floor repeater display 24VDC ext. possible FDS22/ FDS229 FDCI222 HI722 FDCI723 OH720 FDM22x FDCL22-Ex output FDCIO22 FDCIO223 input FDM22 Mimic display FT200-A FDCI22 input 4 outputs FDCIO222 4 inputs Fire controls 2 in-/outputs HI720 optionally FDCL22 OP720 OP720 4 inputs Conventional horn line C-NET OH720 via FCI2009-A DBS72 / DBS729 2 (4) loops DBS720 FDA22/ max. 252 addresses stub line FDA24 FDCW24 FDM273 FDOOT27 Radio detectors FC0 or XC0 Fire detection or Extinguishing control unit collective 2

3 Networking topologies Up to 32 fire control panels und fire control terminals can be connected in a single cluster (C-WEB/SAFEDLINK) or up to 6 stations when the cluster is connected to a danger management system. Using a fiber-optic Backbone (C-WEB/LAN) up to 4 of the above mentioned clusters (with up to 6 stations each) can be networked. The entire network may contain up to 64 stations. For details about system networking, please refer to product data sheet A6V

4 Characteristics The FC722 is a compact fire control panel with an integrated operating unit that can process signals from FD720 devices. The control panel can be used as a stand-alone unit or in a network. The control panel can be programmed with the user-friendly Cerberus-Engineering- Tool to create a system with great versatility. All detector lines are monitored for ground faults. Adaptation of the user text directly on the terminal or with the software engineering tool. Up to 2000 events can be stored according to various criteria. Automatic summer/winter time change. Connection of Siemens Danger Management System Functional elements Operating unit The following are located on the operating unit: CPU module and the electronics for the operating unit Ethernet connection Slots for RS232, RS45 modules and networking modules (SAFEDLINK) Space for 'Kaba' or 'Nordic' key switch Space for event printer (except FC722-YZ) Periphery board The following are located on the periphery board: Connection terminals for C-NET loops, remote transmission (alarm, fault), horn output, programmable control inputs/outputs, monitored alarm and fault output, degrade supply, power supply Plug-in position for loop extension (C-NET) Power supply 70 W or 50 W, emergency power supply The power supply supplies the hardware and charges the batteries The batteries supply the emergency power in case of power failure Housing A pivoting mounting panel can be installed on the housing backplane to allow installation of: fire brigade periphery module (for Germany) sounder module (can also be mounted onto the U-rail TS35) Configuration The FXS722 Cerberus-Engineering-Tool permits the system to be adapted to specific customers' requirements. Application ranges The FC722 is ideally suited for applications, e.g. in workshops, hotels, etc. or when networked as part of much larger applications. The FC722 can be used by the flexible cross-linking possibilities however also for extensive systems. 4

5 Operation Each control panel has an integrated operating unit. Additionally the control panel can be operated from another separate FT724 operator terminal. For details and further information, please refer to product data sheet A6V Overview of FC722 fire control panels Housing (Standard) Housing (Comfort) FC722-ZZ FC722-YZ FC722-ZA FC722-ZE With 24 indicator groups With 4 indicator groups with each one red + yellow LED with each one red + yellow LED 2 Loops 2 Loops With power supply (70 W) With power supply (70 W) Battery capacity max. 2 Ah Battery capacity max. 2 Ah 2 Loops 2 Loops With power supply (50 W) With power supply (50 W) Battery capacity max. 26 Ah Battery capacity max. 26 Ah Expansion External printer FH7202-Z3 FH7203-Z3 FTO200-A DL3750+ Housing (Standard) Housing (Comfort) Event printer Matrix printer (Extern) 430 x 39 x 60 mm 430 x 796 x 60 mm RS232 interface Empty housing for various applications Can be installed in all panels except RS232 module must be ordered FC722-YZ separately RS232 module must be ordered separately e.g. for additional batteries, operating add-on or Operating add-on Event printer FCM723-Y3 FCM724-Y3 Space for batteries 4 indicator groups 96 display groups 2 x FA2003-A (7 Ah) or with each one red/green and one yellow LED 2 x FA2004-A (2 Ah) or 2 x FA2006-A (26 Ah) with one red/green and one yellow LED e.g. for additional batteries, operating add-on or Event printer for retrofitting for retrofitting Space for batteries 2 x FA2003-A (7 Ah) or 2 x FA2004-A (2 Ah) or 2 x FA2005-A (7 Ah) or 2 x FA2006-A (26 Ah) 5

6 Configuration of FC722 in housing (Standard) Basic equipment Designation Notes Rear (Standard) FHA2002-A 2 Periphery board (2-loop) FCI2002-A 3 Power supply (70 W) FP200-A Pos. -5 > Basic equipment for each FC722-xx (Standard) Power supply (70 W) FP205-A 4 Mains terminals on DIN mounting rail TS35 Space for socket, relay modules, etc. 5 Operating unit FCM72xx-xx Combined operating unit and CPU, incl. cover 6 Space for batteries 2 x 2 V / 7 2 Ah Expansion 7 Relay module Z3B7 Relay for fire controls Event printer FTO200-A For event logging 9 Key switch (Kaba) FTO2005-C Key switch (Nordic) FTO2006-B For operating access rights 0 Mounting plate FHA2007-A E.g. for fire brigade peripheral Loop extension (FDnet/C-NET) FCI2003-A For loop extension of 2 to 4, number of addresses remains the same 2 RS45 module (isolated) FCA2002-A For peripheral devices with RS45 port 3 RS232 module (isolated) FCA200-A For stations with RS232 port 4 Networking module (SAFEDLINK) FN200-A For networking various stations 5 Repeater (SAFEDLINK) FN2002-A For the extension of the system bus C-WEB, max. between 2 stations (mounting direct onto plane surface, onto a U-rail TS35 or in housing FDCH22) 6 Sounder module FCA2005-A For split-up of to 4 conventional horn lines 7 Battery (2 V, 7 Ah, VDS) FA2003-A Battery (2 V, 2 Ah, VDS) FA2004-A For emergency power supply Fire brigade periphery module FCI200-D For Germany (FBF, FSD, ÜE, FSE, ÖA, KL) 9 9" mounting kit FHA206-A For the installation in 3 rd party housings 20 License key Sx FCA20xx For special functions 2 Cable kit (communication) FCA204-A For flexible cable connections to the modules on the operating unit 6

7 Configuration of FC722 in housing (Comfort) Basic equipment Designation Notes Rear (Comfort) FHA2003-A 2 Periphery board (2-loop) FCI2002-A Pos. -5 > Basic equipment for each FC722-xx (Comfort) 3 Power supply (SV 24V-50 W) V24230-Z6-A5 4 Mains terminals on DIN mounting rail TS35 Space for socket, relay modules, etc. 5 Operating unit FCM72xx-xx Combined operating unit and CPU, incl. cover 6 Space for batteries 2 x 2 V / 7 26 Ah Expansion 7 Relay module Z3B7 Relay for fire controls Event printer FTO200-A For event logging 9 Key switch (Kaba) FTO2005-C Key switch (Nordic) FTO2006-B For operating access rights 0 Mounting plate FHA2007-A E.g. for fire brigade peripheral Loop extension (FDnet/C-NET) FCI2003-A For loop extension of 2 to 4, number of addresses remains the same 2 RS45 module (isolated) FCA2002-A For peripheral devices with RS45 port 3 RS232 module (isolated) FCA200-A For stations with RS232 port 4 Networking module (SAFEDLINK) FN200-A For networking various stations 5 Repeater (SAFEDLINK) FN2002-A For the extension of the system bus C-WEB, max. between 2 stations (mounting direct onto plane surface, onto a U-rail TS35 or in housings FDCH22) 6 Sounder module FCA2005-A For split-up of to 4 conventional horn lines 7

8 7 Battery (2 V, 2 Ah, VDS) FA2004-A Battery (2 V, 26 Ah, VDS) FA2006-A For emergency power supply Fire brigade periphery module FCI200-D For Germany (FBF, FSD, ÜE, FSE, ÖA, KL) 9 9" mounting kit FHA206-A For the installation in 3 rd party housings 20 License key L or FCA202-A For Cerberus-Remote License key (L2) FCA203-A For Management System (also includes Cerberus-Remote) 2 Cable kit (communication) FCA204-A For flexible cable connections to the modules on the operating unit 22 Power supply kit (50 W, B) FP2005-A For additional power supply Technical data FC722 in housing (Standard) FC722 in housing (Comfort) Mains voltage AC V / AC V AC 9 27 V / AC V Power supply 70 W 50 W Operating voltage DC V DC V Operating current max. 2.5 A max. 5 A Battery capacity 2 x 2 V, 7 2 Ah 2 x 2 V, 26 Ah Battery monitoring yes yes Mains monitoring yes yes Connectable detector series Cerberus PRO FD720 (C-NET) Cerberus PRO FD720 (C-NET) Number of lines Loops (with loop extension) or Stub lines 2 (4) 4 () 2 (4) 4 () Number of addresses max. 252 max. 252 Integrated inputs/outputs Relay output Remote transmission alarm Remote transmission fault Monitored outputs Alarm Fault Horn Free programmable inputs/outputs Operating unit integrated integrated Plug-in position for serial interfaces RS232, 2 2 RS45 Plug-in position for network module 2 2 Plug-in position for loop extension Mounting place for cable kit (communication) 2 Sounder module max. max. Ethernet connection RJ45 Operating temperature C C Storage temperature C C Humidity (no condensation permitted) 95 % rel. 95 % rel. Dimensions (B x H x T) Without cover cap With cover cap 430 x 39 x 60 mm 430 x 39 x mm 430 x 796 x 60 mm 430 x 796 x mm Color Housing Cover grey, ~RAL 7035 grey, ~RAL-Design grey, ~RAL 7035 grey, ~RAL-Design Protection category (IEC 60529) IP30 IP30 Approvals VdS LPCB FM G bn/06 approved G bn/06 approved

9 9

10 Details for ordering Type Part no Designation Weight Fire control panels FC722-ZZ S54400-C29-A5 Fire control panel (2L) kg FC722-YZ S54400-C29-A4 Fire control panel (2L, LED) kg FC722-ZA S54400-C29-A2 Fire control panel (2L).250 kg FC722-ZE S54400-C29-A Fire control panel (2L, 2LED) kg Expansion Z3B7 BPZ: Relay module 250 VAC / 0 A ( relay) kg FTO200-A A5Q Event printer kg A5Q Replacement printer rolls (0 rolls) kg FTO2005-C A5Q00003 Key switch (Kaba) 0.03 kg FTO2006-B A5Q Key switch (Nordic) kg FHA2007-A A5Q00005 Mounting plate 0.00 kg FCI2003-A A5Q Loop extension (FDnet/C-NET) kg FCA2002-A A5Q RS45 module (isolated) kg FCA200-A A5Q RS232 module (isolated) 0.06 kg FN200-A A5Q00025 Network module (SAFEDLINK) kg FN2002-A S24236-B2502-A Repeater (SAFEDLINK) 0.54 kg FCA2005-A A5Q Sounder module 0.40 kg FCA204-A A5Q Cable kit (communication) kg FCI200-D A5Q Fire brigade periphery module 0.42 kg FH7202-Z3 S54400-B70-A0 Housing (Standard) kg FH7203-Z3 S54400-B7-A0 Housing (Comfort) kg FCM723-Y3 S B49-A Operating add-on (2xLED-ind.) kg FCM724-Y3 S B50-A Operating add-on (4xLED-ind.) 2.00 kg FHA206-A A5Q " mounting kit kg FN2006-A S54400-A09-A Fiber network module (SM) kg FN2007-A S54400-A0-A Fiber network module (MM) kg Additional power supply FP2003-A A5Q Power supply kit (70 W) kg FP205-A S54400-B2-A Power supply (70 W),300 kg FP2004-A A5Q Power supply kit (50 W) for installation in.366 kg empty housing FP2005-A A5Q Power supply kit (50 W, B) for cascading.00 kg Networks (backbone) FN200-A S54400-F94-A Ethernet switch 0.00 kg NK237.2 S5446-C7-A Modbus GW kg FHA2029-A S54400-B79-A Mounting kit for Ethernet switch (Comfort) kg FHA2030-A S54400-B-A Mounting kit for Ethernet switch kg (Large Ext.) Batteries FA2003-A A5Q Battery (2 V, 7 Ah, VDS) kg FA2004-A A5Q Battery (2 V, 2 Ah, VDS) kg FA2005-A A5Q Battery (2 V, 7 Ah, VDS) kg FA2006-A A5Q Battery (2 V, 26 Ah, VDS) kg License keys FCA2033-A S54400-P54-A License key (S) 0.00 kg FCA2034-A S54400-P55-A License key (S2) 0.00 kg FCA2035-A S54400-P56-A License key (S3) 0.00 kg External printer DL3750+ A5Q Matrix printer (Extern) kg Spare part A5Q Black typewriter ribbon for matrix printer DL kg Siemens Switzerland Ltd Infrastructure & Cities Sector Division International Headquarters Gubelstrasse 22 CH-630 Zug Tel Copyright by Siemens Switzerland Ltd Data and design subject to change without notice. Supply subject to availability. Document no. A6V _h_en_-- Manual FS720 Edition Section