CONTA-CONNECT. Fuse-disconnect terminals STK/SIK Fused terminals SK
|
|
|
- Ella Rosalind Snow
- 7 years ago
- Views:
Transcription
1 CONTA-CONNECT s STK/SIK Fused terminals SK According to the the applicable VDE regulations, you must protect electrical facilities, machinery and devices with cable or device fusing. CONTA-CLIP offers a variety of product lines to help you meet these requirements. 72
2 s STK/SIK Fused terminals SK Different versions Features SIK 0/SIK 0/Z Features of the SIK 0/SIK 0/Z The fuse-disconnect terminals features a hinged Combi-foot can snap on to TS 32/TS 35 rails hinged lever that can be locked into its open Connection cross-section up to 0 mm 2 position for supporting the micro-fuse. The terminals are available in variants with or without a SIK 0 Z holds fuses (6.3 x 32/6.3 x 25) SIK 0 holds fuses (5 x /5 x 25/5 x 30) status display. Two or three disconnect levers can be coupled and operated simultaneously by using the VBS connection sleeves The status display can be snapped on retroactively Can be used with solid link as disconnect terminal SCREW CONNECTION SYSTEM STK /STK 2 Features of the STK /STK 2 The STK and the STK 2 fuse-disconnect terminals feature a compact shape so they take up minimal space. The hinged hinged lever is used to hold the fuse and locks into its open position. LED status displays are available for a variety of voltage ranges. Combi-foot snaps on to TS 35/TS 32 or mounting foot for the TS 5 rail Connection cross-section up to 4 mm 2 STK and STK2 hold fuses (5 x /5 x 25) Compact design Can be used with solid link as disconnect terminal Fused terminal SK Features of SK The SK fused terminals with screw cap are designed for micro-fuses that are 5 x -sized (without indicator) and 5 x 25-sized (with indicator). Fuses are screwed into the fused terminal via the screw cap. Status displays using LEDs, neon indicator lamps or glow lamps are available for a wide variety of voltage ranges. Terminal housing PA 6.6 UL 4-VO glassfibre reinforced High continuous-use temperature range Fuses are screwed into the fused terminal via the screw cap Fused terminals are available with status displays for a variety of voltage ranges 73
3 s SIK system SIK 0 CONTA-CONNECT SIK 0/ST SIK 0/LED Foot can be snapped on TS 32 and TS 35 DIN rails Housing made from polyamide 6.6 UL 4-V2 Connection diagram 2 connections/disconnect-plug Connection type Size (L x W x H) mm with TS 32 mm Size (L x W x H) mm with TS 35 x 7.5 mm Type Type/colour Colours available Rated specifications acc. to Rated voltage, V Rated current, A Rated wire cross-section, mm 2 AWG Rated impulse voltage, kv Contamination degree Max. power loss on fuse, W Plug gauge acc. to EN Flamm. class acc. to UL 4 Connection data Single wire (solid) / Stranded mm 2 Stranded/stranded (w/ferrules acc. to DIN /) mm 2 Contact wire range, mm 2 Stripping length, mm Torque, Nm Screw Fuse size Features Material of insulated housing Temperature range Number of cross-connection channels Test pick-off Accessories End plate AP 2 poles 3 poles 4 poles 0 poles 60 poles solid link KH End stop ES Screwdriver SDB Quick marking PMC SB 60 x 8 x x 8 x 6 SIK 0 BG 0 SIK 0 BU IEC UL cul Slotted 5x / 5x25 / 5x30 PA to +05 C Page AP 0 BG 2762 AQI 2/8/8 YE AQI 3/8/8 YE AQI 4/8/8 YE AQI 0/8/8 YE AQI 60/8/8 YE SST/SIK/LED (RD)/2V DC/24V AC 3 0 SST/SIK/LED (RD)/-30V DC/40-60V AC 4 0 SST/SIK/LED (RD)/40-60V DC/80-V AC 5 0 SST/SIK/LED (RD)/5V DC/230V AC 6 0 SST/SIK/2LEDs (RD)/24V DC 7 0 SST/SIK/LED (RD) 0 V AC/DC x 8 x x 8 x 6 SIK 0/ST BG IEC UL cul Slotted 5x / 5x25 / 5x30 PA to +05 C Page AP 0 BG 2762 AQI 2/8/8 YE AQI 3/8/8 YE AQI 4/8/8 YE AQI 0/8/8 YE AQI 60/8/8 YE SST/SIK/LED (RD)/2V DC/24V AC 3 0 SST/SIK/LED (RD)/-30V DC/40-60V AC 4 0 SST/SIK/LED (RD)/40-60V DC/80-V AC 5 0 SST/SIK/LED (RD)/5V DC/230V AC 6 0 SST/SIK/2LEDs (RD)/24V DC 7 0 SST/SIK/LED (RD) 0 V AC/DC x 8 x x 8 x 83 SIK 0/LED (RD) BG 03 2V DC/24V AC 25 SIK 0/LED (RD) BG 04-30V DC/40-60V AC25 SIK 0/LED (RD) BG V DC/80-V AC25 SIK 0/LED (RD) BG 06 5V DC/230 V AC 25 SIK 0/2 LEDs (RD) BG V DC 25 IEC UL cul 25 See above Slotted 5x / 5x25 / 5x30 PA to +05 C Page AP 0 BG 2762 AQI 2/8/8 YE AQI 3/8/8 YE AQI 4/8/8 YE AQI 0/8/8 YE AQI 60/8/8 YE More accessories starting on page 264.
4 SIK 0/Z SIK 0/Z/ST SIK 0/Z/LED VBS 2 /0 VBS 2/0/Z SCREW CONNECTION SYSTEM 2 connections/disconnect-plug Connecting pieces for joining the hinged levers Connecting pieces for joining the hinged levers 60 x 0 x x 0 x 6 SIK 0/Z BG IEC UL cul x 0 x x 0 x 6 SIK 0/Z/ST BG IEC UL cul x 0 x x 0 x 83 SIK 0/Z/LED (RD) BG 08 2V DC/24V AC 25 SIK 0/Z/LED (RD) BG 0-30V DC/40-60V AC25 SIK 0/Z/LED (RD) BG V/80-V AC 25 SIK 0/Z/LED (RD) BG 5V DC/230 V AC 25 SIK 0/Z/2 LEDs (RD) BG 2 24 V DC 25 IEC UL cul 25 See above VBS 2/0 OG VBS 3/0 OG 28.3 VBS 2/0/Z OG VBS 3/0/Z OG Slotted 6.3x32 / 6.3x Slotted 6.3x32 / 6.3x Slotted 6.3x32 / 6.3x25 PA to +05 C Page PA to +05 C Page PA to +05 C Page AQI 2/8/8 YE 3.8 AQI 3/0/8 YE 32.8 AQI 4/0/8 YE 33.8 AQI 0/0/8 YE 34.8 AQI /0/8 YE SST/SIK/LED (RD)/2V DC/24V AC 3 0 SST/SIK/LED (RD)/-30V DC/40-60V AC 4 0 SST/SIK/LED (RD)/40-60V DC/80-V AC 5 0 SST/SIK/LED (RD)/5V DC/230V AC 6 0 SST/SIK/2LEDs (RD)/24V DC 7 0 SST/SIK/LED (RD) 0 V AC/DC 7045 KH 63 f. SIK 0/Z AQI 2/8/8 YE 3.8 AQI 3/0/8 YE 32.8 AQI 4/0/8 YE 33.8 AQI 0/0/8 YE 34.8 AQI /0/8 YE SST/SIK/LED (RD)/2V DC/24V AC 3 0 SST/SIK/LED (RD)/-30V DC/40-60V AC 4 0 SST/SIK/LED (RD)/40-60V DC/80-V AC 5 0 SST/SIK/LED (RD)/5V DC/230V AC 6 0 SST/SIK/2LEDs (RD)/24V DC 7 0 SST/SIK/LED (RD) 0 V AC/DC 7045 KH 63 f. SIK 0/Z AQI 2/8/8 YE 3.8 AQI 3/0/8 YE 32.8 AQI 4/0/8 YE 33.8 AQI 0/0/8 YE 34.8 AQI /0/8 YE 35.8 KH 63 f. SIK 0/Z
5 Fuse disconnect terminals system STK 2/5 STK 2 CONTA-CONNECT STKD Foot can be snapped on TS 6, TS 32 and TS 35 DIN rails Housing made from polyamide 6.6 UL 4-V2 Connection diagram Connection type Size (L x W x H) mm with TS 5 mm Size (L x W x H) mm with TS 32 mm Size (L x W x H) mm with TS 35 x 7.5 mm Type Type/colour Type/colour Colours available Rated specifications acc. to Rated voltage, V Rated current, A Rated wire cross-section, mm 2 AWG Rated impulse voltage, kv Contamination degree Max. power loss, W Plug gauge acc. to EN Flamm. class acc. to UL 4 Connection data Single wire (solid) / Stranded mm 2 Stranded/stranded (w/ferrules acc. to DIN /) mm 2 Contact wire range, mm 2 Stripping length, mm Torque, Nm Screw Fuse size(on page 324) Features Material of insulated housing Temperature range Number of cross-connection channels Test pick-off Accessories End plate AP 2 poles 3 poles 4 poles Connecting piece VBS, for joining two fuse-disconnect levers Connecting piece VBS, for joining three fuse-disconnect levers solid link KH End stop ES Screwdriver SDB Quick marking PMC SB 5.4 x 8 x 34 STK 2/5 BG 0 STK 2/5 BU Slotted 5x / 5x25 PA to +05 C Page AP/SI-2 BG 286 AQI 2/8/ YE AQI 3/8/ YE 68.0 AQI 4/8/ YE STK 2 BG 078 STK 2 BU x 8 x x 8 x Slotted 5x / 5x25 PA to +05 C Page AP/SI-2 BG 286 AQI 2/8/ YE AQI 3/8/ YE 68.0 AQI 4/8/ YE STKD BG 07 STKD BU x 8 x x 8 x Slotted 5x / 5x25 PA to +05 C Page AP/SID BG 287 AQI 2/8/ YE AQI 3/8/ YE 68.0 AQI 4/8/ YE More accessories starting on page
6 STK /5 STK /5 LED STK STK LED SCREW CONNECTION SYSTEM 57.5 x 8 x 38.5 STK /5 BG 2 STK /5 BU x 8 x 38.5 STK /5/LED (RD) BG 24 V DC V DC V DC V DC V DC 2463 STK BG 20 STK BU x 8 x x 8 x x 8 x x 8 x 4 STK /LED (RD) BG 24 V DC V DC V DC V DC V DC IEC UL CSA V AC V AC V AC 24 5 V AC V AC IEC UL CSA V AC V AC V AC V AC V AC Slotted 5x / 5x Slotted 5x / 5x Slotted 5x / 5x Slotted 5x / 5x25 PA to +05 C Page AP SI- BG 46 AQI 2/8/ YE AQI 3/8/ YE 68.0 AQI 4/8/ YE 6.0 VBS 2/0 OG 2873 VBS 3/0 OG PA to +05 C Page AP SI- BG 46 AQI 2/8/ YE AQI 3/8/ YE 68.0 AQI 4/8/ YE 6.0 VBS 2/0 OG 2873 VBS 3/0 OG PA to +05 C Page AP SI- BG 46 AQI 2/8/ YE AQI 3/8/ YE 68.0 AQI 4/8/ YE 6.0 VBS 2/0 OG 2873 VBS 3/0 OG PA to +05 C Page AP SI- BG 46 AQI 2/8/ YE AQI 3/8/ YE 68.0 AQI 4/8/ YE 6.0 VBS 2/0 OG 2873 VBS 3/0 OG
7 Glass-fibre reinforced fused terminals SIK SK system SIK 0/Z PA-G CONTA-CONNECT SK /35 PA-G SK /35 LED PA-G Foot can be snapped on TS 32 and TS 35 DIN rails Housing made from Polyamide 6.6 V0, glass-fibre reinforced Connection diagram Fused terminal Fused terminal 2 connections / screw cap Fused terminal 2 connections / screw cap Connection type Size (L x W x H) mm with TS 32 mm Size (L x W x H) mm with TS 35 x 7.5 mm Type Colours available Rated specifications acc. to Rated voltage, V Rated current, A Rated wire cross-section, mm 2 AWG Rated impulse voltage, kv Contamination degree Plug gauge acc. to EN Flamm. class acc. to UL 4 Connection data Single wire (solid) / Stranded mm 2 Stranded/stranded (w/ferrules acc. to DIN /) mm 2 Contact wire range, mm 2 Stripping length, mm Torque, Nm Screw Fuse size, mm (on page xxx) Features Material of insulated housing Temperature range Number of cross-connection channels Test pick-off Accessories End plate AP Screw cap SKA (spare) Screw cap SKA (spare) 2 poles QS cross-connection rail 3 poles QS cross-connection rail 4 poles QS cross-connection rail 0 poles QS cross-connection rail poles Mounting screw BS for the QS End stop ES Screwdriver SDB Quick marking PMC SB 60 x 0 x 6 SIK 0/Z PA-G BK A4 V Slotted M4 6.3 x x 2.5 PA 6.6 GV -40 to +40 C - Page AQI 2/0/8 YE 3.8 AQI 3/0/8 YE 32.8 AQI 4/0/8 YE 33.8 AQI 0/0/8 YE 33.8 AQI /0/8 YE x 2 x 62 SK /35 PA-G BK Fuse size 5x mm A5 V Slotted M4 5 x PA 6.6 GV -40 to +40 C Page AP SI BK 47.4 SKA 5x SKA 5x QS QS QS QS BS x x 2 x 62 SK /35 LEDPA-G with LED 24 V DC V DC V AC V AC.4 SK /35 GPA-Gwith neon indicator lamp 5 V AC V AC SK /35 G PA-G with glow lamp 24 V AC/DC 36.4 Fuse size 5x mm See above A5 V Slotted M4 5 x PA 6.6 GV -40 to +40 C AP SI BK 47.4 SKA 5x 4 QS QS QS QS BS x Page More accessories starting on page
8 SK /35 PA-G SCREW CONNECTION SYSTEM Fused terminal 2 connections / screw cap 52 x 2 x 62 SK /35 m. K. PA-G BK Fuse size 5x25 mm with indicator A5 V Slotted M4 5 x 25 PA 6.6 GV -40 to +40 C Page AP SI BK 47.4 SKA 5x SKA 5x QS QS QS QS BS x
Feed-through terminals
s Screw connection system RKB 4 BKA 2,5 BKA 4 BKA 0 Rail mount on TS 5 / TS 32 / TS 35 / Direct mounting Connection diagram M 3 M 2,5 M 3 M 4 Connection type Dimension (L x W x H) with TS 5 mm with TS
Safety Relays ESM/ESM-F
Safety Relays ESM/ESM-F More than safety. Safety More than safety. Emil Euchner, the company s founder and inventor of the multiple limit switch, circa 1928. Around the world the Swabian specialists in
Plug and Socket Devices CES 63 A Series 8579
www.stahl.de > Switch socket / plug 63 A > Large switch handle with clear switch position indication padlockable in 0- and I-position > Low insertion and withdrawal forces through individually encapsulated
PC 4/ 4-ST-7,62. Extract from the online catalog. Order No.: 1804920
Extract from the online catalog PC 4/ 4-ST-7,62 Order No.: 1804920 The figure shows a 5-pos. version of the product Plug component, nominal current:, rated voltage: 400 V, pitch: 7.62 mm, no. of positions:
Product and functional description
Product and functional description The KNX / DALI gateway N 141/02 is a 4 MU wide, DINrail mounted KNX device with one DALI interface to which up to 64 DALI actuators (e.g. DALI ballasts) can be connected
Fuses for Semiconductor Protection - Cylindrical Fuses. Class: Voltage ratings: Current ratings: Standards: Approvals: Features and Benefits
Fuses for Semiconductor Protection - Cylindrical Fuses SIBA cylindrical Ultra-Rapid fuses are available in six different sizes They can be ordered with an integral striker for blown fuse indication or
Feed-through terminal block - SSK 110 KER-EX - 0502058
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
Powermate Range Pitch 7.62
owermate Range itch 7.62 in headers Socket connectors CB connection Solder connection SV 7.62/90 500 V / 43 A SV 7.62/180 500 V / 41 A.2.4 Cable connection Clamping yoke connection Tension clamp connection
Control Devices Catalogue. Control Devices. Preferred and Standard Products
Control Devices Catalogue Control Devices Preferred and Standard Products KOP.J Timer Electronic 22.5 mm Characteristics Mounting KOP.J 22.5 mm mono or multifunction high immunity to interference surface
Spring Cage Feed-Through Terminal Blocks ST
Spring Cage Feed-Through Terminal Blocks ST The product family ST with the new spring cage system "mini spring" is extremely space-saving. Space is saved thanks to a clearly smaller spring system without
Series 8146/5-V37 and Series 8150/5-V37
www.stahl.de > Clear assignment safe technology easy installation > Intelligent structure only one rotary actuator for frequency-controlled drives ) 20 ms leading auxiliary contact for safe motor disconnection
DEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050
Extract from the online catalog DEK-REL- 24/1/SEN Order No.: 2964050 Relay terminal block for sensor, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage
PC 4/ 2-ST-7,62. Extract from the online catalog. Order No.: 1804904
Extract from the online catalog PC 4/ 2-ST-7,62 Order No.: 1804904 The figure shows a 5-pos. version of the product Plug component, Nominal current: 20 A, Nom. voltage: 400 V, Pitch: 7.62 mm, Number of
Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.
Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description
NA1FC7T. Fuse holder terminal blocks
NAFC7T 00 Fuse holder terminal blocks T0077 009 Fuse holder terminal blocks for 5 x 0 mm and 5 x 5 mm fuses Compression clamp DIN - DIN Spacing 8 mm (.5") M 4/8.SF... Spacing 8 mm (.5") M 4/8.SFT Standard
48 SERIES Relay interface modules 10 A
48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply
Digital input modules
8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a
Relés e Contatores de Estado Sólido SIRIUS
Relés e Contatores de Estado Sólido SIRIUS Coletânea de dados técnicos ( product data sheet ) Agosto/212 SSR - 3RF21 22,5 mm Ponto Zero SSR - 3RF2 45 mm Ponto Zero SSR - 3RF22 45 mm Ponto Zero Trifásico
PC 4/ 5-STF-7,62. Extract from the online catalog. Order No.: 1828278
Extract from the online catalog PC 4/ 5-STF-7,62 Order No.: 1828278 The figure shows a 5-pos. version of the product Plug component, Nominal current: 20 A, Nom. voltage: 400 V, Pitch: 7.62 mm, Number of
400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
HARTING Ethernet Cabling 8-poles Overview
Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs
PHOENIX CONTACT - 01/2007
Uninterruptible power supply INTERFACE Data Sheet 103123_00_en PHOENIX CONTACT - 01/2007 Description Especially compact and easy-to-use, the new MINI-DC-UPS/ 24 DC/2 is a combination of the power supply
Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
Type: DILM32 10(24V50HZ) Article No.: 277247
Type: DILM32 10(24V50HZ) Article No.: 277247 Ordering information Rated operational current AC 3 400 V I e A 32 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors,
Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
HARAX circular connector
Show navigation HARAX circular connector Technical characteristics Specifications IEC 60 352-4 IEC 60 9475-2 Approvals HARAX M8-S/M12-S Rated voltage Rated current Diameter of individual strands Conductor
Electronic overload relay EF19 and EF45
Data sheet Electronic overload relay EF19 and EF45 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor
Type: EASY719 DC RC Article No.: 274119. Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC. Description
Type: EASY719 DC RC Article.: 274119 Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC Description 12 digital inputs (4 inputs available as analog inputs) 6 relay outputs LCD display
STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase
Extract from the online catalog STEP-PS/1AC/12DC/1.5 Order No.: 2868567 DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Commercial data EAN 4046356292924 Pack 1 pcs. Customs tariff
HARTING Ethernet Cabling 4-poles Overview
Ethernet Cabling 4-poles Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] Connectors [on page 22] System cables [on page 24] Panel feed-throughs
IEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
7000 Series Buccaneer
The all plastic and metal construction of the - circular that combine the ease of use of a quick coupling mechanism with proven environmental sealing for signal and mains power. Designed and independently
Emergency stop As an emergency switching off/emergency stop device. Standards According to IEC/EN 60204-1, VDE 0113 Part 1
MainswitchSurfacemounting Partno. P3-63/I4/SVB Articleno. 207343 CatalogNo. SP3-063-I4CRQ IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual
Redundancy Module QUINT-DIODE/40
Redundancy Module QUT DIODE provides: 00% decoupling of power supplies connected in parallel Can be installed in potentially explosive areas Load currents up to 60 A supported Easy assembly by snapping
MasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy
GMKDS 3/ 3-7,62. Extract from the online catalog. Order No.: 1731734
Extract from the online catalog GMKDS 3/ 3-7,62 Order No.: 1731734 The illustration shows a 2-position version PC terminal block, Nominal current: 24 A, Nom. voltage: 500 V, Pitch: 7.62 mm, Number of positions:
12 Series - Time switches 16 A. Features 12.01 12.11 12.31
Mechanical time switches - daily time setting Type 12.01-1 Pole 16 A CO (SPDT) Type 12.11-1 Pole 16 A O (SPST-O) 17.6 mm width Type 12.31-0000 - 1 Pole 16 A CO (SPDT) Type 12.31-0007 - 1 Pole 16 A CO (SPDT)
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
MKDSN 1,5/ 3-5,08. Extract from the online catalog. Order No.: 1729131
Extract from the online catalog MKDSN 1,5/ 3-5,08 Order No.: 1729131 The figure shows a 10-position version of the product PC terminal block, Nominal current: 13.5 A, Nom. voltage: 250 V, Pitch: 5.08 mm,
0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
LINETRAXX VMD460-NA. Network and system protection (NS protection) for monitoring the power feed-in of power generation systems
LIETRAXX -A etwork and system protection (S protection) for monitoring the power feed-in of power generation systems TDB301021en/06.2013 LIETRAXX -A etwork and system protection (S protection) for monitoring
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical
Vario-Series Accessories
Accessories and spare parts for GMW analogue panel meters and controllers Current Transformers pages 2-9 Shunt Resistors 10-11 Voltage Dividers 12 Power supply for indicator/controllers 13 Blanking Plates
48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according
Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet
Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order
Type: DILM50(230V50HZ,240V60HZ) Article No.: 277830
Type: DILM50(230V50HZ,240V60HZ) Article No.: 277830 Ordering information Rated operational current AC 3 400 V I e A 50 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
Safety technique. Emergency stop module BO 5988 safemaster
Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1
Product and Applications Description. Application Programs. Example of Operation. GAMMA instabus Technical Product-Information.
Product and Applications Description The power supply units N 125/x2 can supply DC 24 V power from an additional pair of terminals (yellowwhite). This DC 24 V output voltage can be used to power e.g. an
49 Series - Relay interface modules 8-10 - 16 A. Features
Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole
01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS
. HARTING RJ INDUSTRIAL ETHERNET CONNECTORS Ethernet is is coming up to standard industrial interface. Therefore, automation devices such as controllers, sensors and actuators feature possess on one or
Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
MasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - 39 Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic
Power Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1
Power Supply Unit, Primary Switched, Narrow Design MINI POWER provides: Extra narrow design with widths of 22.5 mm, 45 mm, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a wide-range input
Feed-through terminal blocks for high-current applications
596 PHOENIX CONTACT With the feed-through terminal blocks, you can freely select the connection technology. Choose between traditional screw connection, robust bolt connection, and convenient push-in connection
AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101403D0201 24/03/11 AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF09(Z) contactors are used for controlling power circuits
Thermistor motor protection relays CM-MSS.22 and CM-MSS.23
Data sheet Thermistor motor protection relays CM-MSS.22 and CM-MSS.23 The thermistor motor protection relays CM-MSS.22 and CM-MSS.23 monitor the winding temperature of motors and protect them from overheating,
13 SERIES. Electronic step relays 10-16 A 13.81 13.91
13 Electronic step relays 10-16 A 13 13.81 - Electronic step relay - Rail mount - 1 Pole 13.91 - Electronic step relay and timing step relay Switch box mount - 1 Pole Fixed time (10 minutes) timing function
ISOMETER IRDH275. Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems) Vorläufiges Datenblatt
Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems) Vorläufiges Datenblatt TDB106015en/05.2013 Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems)
Plug and Socket Devices SolConeX 16 A Series 8570
www.stahl.de > Switch socket / plug 16 A > Minimal force required to insert and remove > Can be optionally equipped with an auxiliary contact for control and signalling purposes > arge switching handle
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
Reference. 910 402 230 V, 50 Hz A10 415 120 V,60 Hz. 916 402 230 V, 50/60 Hz A16 418 120 V, 50/60 Hz. 910 103 230 V, 50 Hz A10 104 120 V, 60 Hz
Rex - analog time switches MicroRex - 3 modules for DIN rail mounting Rex - analog time switches MicroRex - module for DIN rail mounting 926 428 A0 4 MicroRex T3 24 hour program, synchronous motor 92 429
Catalog. Modular DIN rail components Installation contactors
Catalog Modular DIN rail components Installation contactors 0 CDC00C00 Installation contactors Benefits and features Overview Ordering details ESB installation contactors ESB0 ESB ESB0 ESB 7 EN installation
Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages The CM-ESS.M is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101433D0201 28/03/11 NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits.
08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
Block width on rail (mm) Standard block* is shown on blue background
How To Read Terminal Block Specifications How To Read Carton Labels Rated wire size (mm ) Mounting on multiple rail Spacing on rail Spacing 6 mm + 0,05 (.3") M /6 Block width on rail (mm) Standard block*
Single-phase (220...240 V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable
Features 70.11 70.31 70.41 Electronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring Undervoltage, Overvoltage, Window
This product can be assembled to the baseplate maintaining 5 mm center-to-center spacing. Thus any number of poles can end-to-end stack.
page 1/5 Plug-in Screw Connector System for Printed Circuit Boards 950-NLFL-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-NLFL-DS 950-NLFL & 971-SLK TECHNICAL INFORMATION Description This two
gesis IP + Heavy Duty Class I, Zone 2
gesis IP + Heavy Duty gesis IP+ 20i HD Z2 Heavy-Duty Connectors for Class 1, Zone 2 Hazardous Locations Catalog 2012 Catch the Next Wave in Modular Connections Plug & Go Heavy-Duty Connectors for areas
Air damper actuators
4 634 OpenAir TM Air damper actuators GDB...1 GLB...1 Rotary version, / AC 230 V Electronic motor driven actuators for three-position and modulating control Nominal torque 5 Nm (GDB), 10 Nm (GLB) Mechanically
38 SERIES. Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
R.C.C.B. s two-pole LEXIC
87045 LIMOGES Cedex Telephone : (+33) 05 55 06 87 87 Fax : (+ 33) 05 55 06 88 88 R.C.C.B. s two-pole LEXIC 089 06/09/10/11/12/15/16/17/18/ 27/28/29/30/35, CONTENTS PAGES 1. Electrical and mechanical characteristics...
Manual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical devices for motor and circuit protection. These devices offer local motor disconnect means, manual ON/ OFF control, and
Uncompromising safety and comfort The next generation of miniature circuit breakers MCB S 200/S 200 M
Uncompromising safety and comfort The next generation of miniature circuit breakers MCB S 200/S 200 M The details make the difference MCB S 200/S 200 M A range designed to ensure efficiency and protection
TX OPEN RS232/485 module
s 8 185 8185P01 TX-I/O ; DESIGO OPEN TX OPEN RS/485 module for integrating third-party systems and devices to DESIGO (V4 or higher) TXI1.OPEN Platform to integrate third-party systems and devices to the
E-STOP relays, safety gate monitors
Unit features Safety features Gertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided
Mini Motor Contactor J7KNA Main contactor Accessories Approved Standards Standard Guide No (US,C) Ordering Information tage Model Number Legend gear
Mini Motor Contactor J7KNA ) Main contactor AC & DC operated Integrated auxiliary contacts Screw fixing and snap fitting (35 mm DIN-rail) Range from 4 to 5.5 (AC 3, 380/415V) 4 -main pole version (4 AC
BETA Protecting SITOR Semiconductor Fuses
BETA Protecting SITOR Semiconductor Fuses /2 Product overview /3 /17 SITOR, cylindrical fuse design /22 SILIZED, NEOZED and DIAZED design Siemens ET B1 /2008 Product overview Overview Devices Page Field
Socket P2RF-05-S P2RF-08-S Clip & Release Lever R99-11 nameplate for MY
Screwless Clamp Terminal Socket Screwless clamping greatly contributes to reducing wiring time. No over or under tightening of cable connection so better contact reliability is achieved. Double wiring
System pro M compact Miniature Circuit Breaker S 200/S 200 M
Data Sheet System pro M compact Miniature Circuit Breaker S 200/S 200 M 2CDC021023S0012 2CDC021038S0012 The miniature circuit breakers of the System pro M compact series S 200 and S 200 M provide state-of-the-art
PHOENIX CONTACT - 2012-12-14. Features
Electronic monitoring relay for phase sequence, phase failure, and asymmetry monitoring Data sheet 101748_en_03 1 Description PHOEIX COTACT - 2012-12-14 Features Increasingly higher demands are being placed
40.3. Control Relays and Timers
.3 Contents EASY500/700/800 Intelligent Relays........ EASY/MFD Expansion Modules............ MFD Intelligent Relays................... EASY/MFD Communication Modules....... EASY/MFD Power Supplies, Accessories
PNOZsigma - Base units
PNOZsigma - Base units Register Login Sensors Control and Communication Electronic monitoring relays Safety Relays PNOZ X PNOZsigma PNOZelog PNOZmulti PNOZpower Configurable control systems Programmable
ZS4-S-T Screw Clamp Terminal Blocks Disconnect with blade - with test socket
Technical Datasheet SNK64D00 Catalogue Page SNK64S00 ZS4-S-T Screw Clamp Terminal Blocks Disconnect with blade - with test socket - Ease your test operations with the built-in test sockets, - Screwdriver
MCR1900 Media Converter 19-Slot Chassis
MCR1900 Media Converter 19-Slot Chassis Installation Guide Part #5500304-11 Copyright Statement This document must not be reproduced in any way whatsoever, either printed or electronically, without the
Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component.
Overview Switch and button modules The dimensions of the switch and button modules are adapted to the electronic components in the integral housing. The modules are equipped with the universal clip-on
CompactLogix Power Supplies Specifications
Technical Data CompactLogix Power Supplies Specifications 1768 CompactLogix Power Supplies Catalog Numbers 1768-PA3, 1768-PB3 1769 Compact I/O Power Supplies Catalog Numbers 1769-PA2, 1769-PB2, 1769-PA4,
D7 Series Standard and Full Featured. Standard DPDT 24V AC 120V AC 240V AC 12V DC 24V DC 120V AC 110V DC 240V AC 6V AC 6V DC 12V AC 12V DC 24V AC
April 00 D Series Standard and Full Featured - Catalogue Number Structure Table -. D Series Catalogue Numbering System Family Type DPR = Standard Relay DPF = Full Featured Relay Contact Configuration =
A good connection. International approvals.
E X - P L U G S A N D R E C E P T A C L E S A to A Plastic version for Zone and Zone A good connection Providing electrical energy there, where it is most needed even in hazardous areas for the Zones,,
BETA Switching. Switching Devices. 5TT5 8 Insta contactors, AC technology. Overview
BETA Switching Siemens AG 200 5TT5 Insta contactors, AC technology Overview The 5TT5 Insta contactors are equipped with an AC magnetic system and are ideal for use under harsh conditions. The auxiliary
V REG.-Nr. 115719, Z E135149 Technical data 2-pole 4-pole Rated current 12 A 6 A SCHRACK. Accessories Miniature Relay PT. General Purpose Relays
Accessories Miniature Relay PT Easy replacement of relays on a densely packed DIN rail No reduction of protection class or creepage/clearance with plastic retainer Plug-in indicator- and protection modules
Type: DILM9 10(24VDC) Article No.: 276705
Type: DILM9 10(24VDC) Article No.: 276705 Ordering information Rated operational current AC 3 400 V I e A 9 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors, 50
Thermal-Magnetic Circuit Breaker 3120-...-M1-..
Thermal-Magnetic Circuit Breaker -...-M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 34). The addition of a magnetic tripping
Electronic overload relay EF65, EF96 and EF146
Data sheet Electronic overload relay EF65, EF96 and EF146 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays.
Safety automation solutions
Operating principle, characteristics Preventa safety s types XPS AV,, For and switch monitoring Operating principle Safety s XPS AV, and are used for monitoring circuits conforming to standards EN/ISO
Datasheet. AC Outlet DIN-Rail Mountable Receptacles
Datasheet AC Outlet DIN-Rail Mountable Receptacles DIN-rail receptacles, 5A, 15A and 20A power outlets, provide a convenient power source for portable computers or test devices for in-the-panel troubleshooting.