Feed-through terminals
|
|
|
- Margery Mosley
- 7 years ago
- Views:
Transcription
1 s Screw connection system RKB 4 BKA 2,5 BKA 4 BKA 0 Rail mount on TS 5 / TS 32 / TS 35 / Direct mounting Connection diagram M 3 M 2,5 M 3 M 4 Connection type Dimension (L x W x H) with TS 5 mm with TS 32 mm with TS 35 x,5 mm Direct mounting Gauge plug acc. to EN / Flammability class UL 4 For certifications and approvals Flexible/Flexible (with ADH acc. to DIN /) mm 2 Contact wire range mm 2 Features Number of cross connection channels Test pick-off feature Accessories End plate AP beige blue Partition plate TW beige blue Insulation plate TRS 2 poles Outer insulated cross connector A poles 3 poles Outer insulated cross connector A poles 4 poles Outer insulated cross connector A poles 0 poles Outer insulated cross connector AQI0 poles End holder EH/Direct mounting screw Endhalter EH/Rail mounting End holder EH/Direct mounting pin Screw driver Further accessories Further accessories like marking systems, test adapters, covers, end brackets etc. you can find on the pages for accessories specified below! * Applies 2 x 6 x 2,5 RKB 4 beige 08.2/00 RKB 4 blue 08.5/00 * ,2-2,5 AP, / /50 TW, / / / / /0 Q /0 EH 235.2/ / 22 x 5 x 23 BKA 2,5/ beige 320.2/00 BKA 2,5/ blue 320.5/ , ,2-2,5 A/5/ /50 A/5/ /50 A/5/ /50 AQI 0/5/ /0 EH /50 EH 5/BKA 245.2/50 EH 2-Z 24.2/ / 22 x 6 x 23 BKA 4/ beige 258.2/00 BKA 4/ blue 258.5/ A/6/ 225.0/50 A/6/ 226.0/50 A/6/ 240.0/50 AQI 0/6/ /0 EH /50 EH 5/BKA 245.2/50 EH 2-Z 24.2/ / 30 x 8 x 3 BKA 0/ beige 4.2/50 BKA 0/ blue 4.5/ A5 V2 0, , A/8/ 206.0/50 A/8/ /50 A/8/ 206.0/50 EH /20 EH 35/BKA 246.2/ / 4
2 SRK 2,5/5 RK,5-4/5 SRK 2,5 RK,5-4 M 2,5 M 3 M 2,5 M 3 26 x 5 x 2,5 2 x 6 x 34,5 45 x 5 x 43,5 45 x 5 x 3 45 x 6 x x 6 x 43,5 SRK 2,5/5 beige 035.2/00 SRK 2,5/5 blue 035.5/ , RK,5-4/5 beige 00.2/00 RK,5-4/5 blue 00.5/00 RK,5-4/5/STB 03.2/ SRK 2,5 beige 030.2/00 SRK 2,5 blue 030.5/ , RK,5-4 beige 05.2/00 RK,5-4 blue 05.5/00 RK,5-4/STB 00.2/ ,2-2,5 0,2-2,5 AP 2,5/ / /50 TW 2,5/ / / /50 AP, / /50 TW, / / / /20 AP-SR 200.2/ /50 TW 2, / / /20 AP, / /50 TW, / / / / / / / / /0 Q /0 Q /0 Q /0 Q / / 086.0/ 085.0/ 086.0/ 5
3 s Screw connection system RK 2,5 RK 2,5/35 N/2 Q RK 2,5-4 RK 2,5-4/35 Rail mount on TS 32 / TS 35 Connection diagram M 2,5 M 2,5 M 3 M 3 Connection type Dimension (L x W x H) with TS 32 mm with TS 35 x,5 mm Gauge plug acc. to EN / Flammability class UL 4 For certifications and approvals Flexible/Flexible (with ADH acc. to DIN /) mm 2 Contact wire range mm 2 Features Number of cross connection channels Test pick-off feature Accessories End plate AP beige blue Partition plate TW beige blue Insulation plate TRS Screw driver Further accessories Further accessories like marking systems, test adapters, covers, end brackets etc. you can find on the pages for accessories specified below! * Applies 6 48 x 5 x 5,5 48 x 5 x 4 RK 2,5 beige 26.2/00 RK 2,5 blue 26.5/00 RK 2,5 DS beige 48.2/00 ) RK 2,5 DS blue 48.5/00 ) , ,2-2,5 AP 2, / /50 TW 2, / / / /20 Q / / ) cross connection not possible 62,5 x 5, x 4 RK 2,5/35 N/2 Q/35 beige 54.2/00 RK 2,5/35 N/2 Q/35 blue 54.5/00 RK 2,5/35 N/S/2 Q/35 beige 55.2/00 2) RK 2,5/35 N/S/2 Q/35 blue 55.5/00 2) , ,2-2,5 2 AP 2, / /50 TW 2,5-0 Z,5/2 30.8/50 Z,5/3 3.8/50 Z,5/4 32.8/20 Z,5/5 33.8/20 Z,5/6 34.8/20 Z,5/ 35.8/20 Z,5/8 36.8/0 Z,5/ 3.8/0 Z,5/0 38.8/ / 2) with screen rail 48 x 6 x 5,5 48 x 6 x 4 RK 2,5-4 beige 00.2/00 RK 2,5-4 blue 00.5/00 RK 2,5-4/STB beige 008.2/00 3) RK 2,5-4 DS beige 4.2/00 ) RK 2,5-4 DS blue 4.5/00 ) , ,2-6 0,2-6 2 AP 2, / /50 TW 2,5-0 TRS / / / / / / /20 Q /0 QI / / 3) with connector socket 48 x 6 x 4 RK 2,5-4/35 beige 5.2/00 RK 2,5-4/35 blue 5.5/ , ,2-6 0,2-6 2 AP 2, / /50 TW 2,5-0 TRS / / / / / / /20 Q /0 QI / /
4 RK 6-0 RK 6-0/35 RK 6 RK 6/35 N RK 35 RK 35/35 N M 4 M 4 M 5 M 5 M 6 M 6 CONTA-CONNECT 48 x 8 x 5,5 48 x 8 x 4 48 x 8 x 4 50 x 2 x x 2 x 58,5 54 x 2 x 4 58 x 6 x 6 58 x 6 x,5 58 x 6 x 52 RK 6-0 beige 005.2/00 RK 6-0 blue 005.5/00 RK 6-0 DS beige 8.2/00 ) RK 6-0 DS blue 8.5/00 ) * A5 V2 RK 6-0/35 beige 58.2/00 RK 6-0/35 blue 58.5/ A5 V2 RK 6 beige 050.2/50 RK 6 blue 050.5/50 RK 6/IS beige 42.2/50 4) RK 6/IS blue 42.5/50 4) RK 6/Z beige 62.2/50 5) RK 6/Z blue 62.5/50 5) RK 6/Z-IS beige 43.2/50 4)5) RK 6/Z-IS blue 43.5/50 4)5) IEC UL* CSA B V2 RK 6/35 N beige 5.2/50 RK 6/35 N blue 5.5/50 RK 6/35 N/Z beige 53.2/50 5) RK 6/35 N/Z blue 53.5/50 5) B V2 RK 35 beige 052.2/20 RK 35 blue 052.5/20 RK 35/IS beige 44.2/20 4) RK 35/IS blue 44.5/20 4) RK 35/Z beige 63.2/20 5) RK 35/Z blue 63.5/20 5) RK 35/Z-IS beige 45.2/20 4)5) RK 35/Z-IS blue 45.5/20 4)5) B V2 RK 35/35 N beige 52.2/20 RK 35/35 N blue 52.5/20 RK 35/35 N/Z beige 54.2/20 5) RK 35/35 N/Z blue 54.5/20 5) B V2 0,2-0 0,2-0 0,2-0 0,2-0 0, ,2-0 0,2-0 0,2-0 0,2-0 0,2-0 2,5-6 2,5-25 2,5-6 2,5-6 2, ,5-6 2,5-25 2,5-6 2,5-6 2, ,5-6 2,5-35 2,5-35 2,5-35 2, ,5-6 2,5-35 2,5-35 2,5-35 2, AP 2, / /50 TW 2,5-0 TRS / / / / / / /20 Q /0 QI /0 AP 2, / /50 TW 2,5-0 TRS / / / / / / /20 Q /0 QI /0 AP / /50 TW / /50 22./ / /0 Q / / / /0 Q /0 AP / /20 TW /20 2.5/ / / /0 Q / / / /0 Q /0 08.0/ 08.0/ 08.0/ 08.0/ SDB,2 x 6, / SDB,2 x 6, / ) cross connection not possible 4) with hexagon socket screw 5) with housing pins
5 s Screw connection system RK 50 RK 5 RK 50 RK 240 Rail mount on TS 32 / TS 35 M 6 M 8 M 0 M 0 Connection diagram Connection type Dimension (L x W x H) with TS 32 mm with TS 35 x,5 mm Gauge plug acc. to EN / Flammability class UL 4 For certifications and approvals Flexible/Flexible (with ADH acc. to DIN /) mm 2 Contact wire range mm 2 Features Number of cross connection channels Test pick-off feature Accessories Outer insulated cross connector A poles Outer insulated cross connector A poles Cover AD Inlay profile EP Hexagon socket screw key ISKS Pick off terminal MAG 8 x 20 x 82 x 20 x 6,5 RK 50 beige 20.2/0 RK 50 blue 20.5/ /0-6 B0 V A/ /5 A/ /5 AD / / /0 ISKS / MAG /0 84 x 25 x 4 84 x 25 x 88,5 RK 5 beige 22.2/0 RK 5 blue 22.5/ /0-2 B2 V A/ /5 A/ /5 AD / /20 EP /0 ISKS / MAG /0 3 x 3 x 8,5 3 x 3 x 2,8 RK 50 beige 24.2/5 RK 50 blue 24.5/ B4 V A/ /5 A/ /5 AD / / /0 ISKS / MAG 50/ /0 3 x 36 x 32 3 x 36 x 26,3 RK 240 beige 26.2/5 RK 240 blue 26.5/ /0 B6 V A/ /5 A/ /5 AD / /20 EP /0 ISKS / MAG 50/ /0 Further accessories Further accessories like marking systems, test adapters, covers, end brackets etc. you can find on the pages for accessories specified below! * Applies 8
6 Feed-Through Terminal Accessories RK 50 to RK 240 The terminal blocks RK 50 to RK 240 consist of a double shell insulating terminal carrier and due to the special construction of the strain-relief clamp, offer low transitional resistance between the conductor and the contact rail. A broad accessory programme effectively completes this series. CONTA-CONNECT Measurement Pick-Up Terminals MAG MAG measurement pick-up terminals allow the voltage to be picked up on terminal blocks with a larger cross sections by conductors with smaller cross sections from 0.2 to 0 mm 2. MAG connection elements are introduced into the respective terminal block above the mains lead-in and make contact with the contact rail through the connection screw of the main terminal block. This ingenious and safe technical solution simplifies wiring considerably. Measurement Pick-Up Terminals MAG MAG 50 MAG 5 MAG 50/240 Gauge plug acc. to EN / Flammability class UL 4 Flexible/Flexible (with ADH acc. to DIN /) mm 2 For terminal MAG /0 IEC UL* CSA* / A5/V2 0,2-0 0,2-0 0,2-0 0,2-0 2 RK 50 MAG /0 IEC UL* CSA* / A5/V2 0,2-0 0,2-0 0,2-0 0,2-0 2 RK 5 MAG 50/ /0 IEC UL* CSA* / A5/V2 0,2-0 0,2-0 0,2-0 0,2-0 2 RK 50, RK 240 Insertion Plates EP When connecting band conductors, it is necessary to put insertion plates in the strain-relief clamps. The EPs compensate for the V-form geometry in the strain-relief clamps (terminal cage). This also affords the band conductor a safe and dependable connection. Insertion Plates EP EP 5 EP 240 For terminal 224.0/0 RK 50 EP /0 RK /0 RK 50 EP /0 RK 240
Feed-through terminal block - SSK 110 KER-EX - 0502058
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
picomax The Pluggable Connection System
picomax The Pluggable Connection System TECHNOLOGY THIS SPECIALIZED CAN T MEET ALL REQUIREMENTS. YES IT CAN. CONTENTS picomax Pin spacing: 3. mm/0.138 in;.0 mm/0.197 in; 7. mm/0.29 in Versatile Pluggable
Spring Cage Feed-Through Terminal Blocks ST
Spring Cage Feed-Through Terminal Blocks ST The product family ST with the new spring cage system "mini spring" is extremely space-saving. Space is saved thanks to a clearly smaller spring system without
HARAX circular connector
Show navigation HARAX circular connector Technical characteristics Specifications IEC 60 352-4 IEC 60 9475-2 Approvals HARAX M8-S/M12-S Rated voltage Rated current Diameter of individual strands Conductor
01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS
. HARTING RJ INDUSTRIAL ETHERNET CONNECTORS Ethernet is is coming up to standard industrial interface. Therefore, automation devices such as controllers, sensors and actuators feature possess on one or
Digital input modules
8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a
Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2
Type code Ident no. 1545065 Number of channels 2 Dimensions (W x L x H) 108 x 145 x 77.5 mm CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps Male
Terminals, W-Series. Contents. Terminals, W-Series. Terminals, W-Series. Terminals, TS 15. Stud terminals. Accessories. Terminals, SAK-Series E.
Contents Overview W-Series.2 Feed-through terminals.4 Double level terminals.14 Modular P terminals.19 Modular disconnect terminals.29 Fuse terminals.5 Installation terminals.40 Disconnect test terminals.4
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
Block width on rail (mm) Standard block* is shown on blue background
How To Read Terminal Block Specifications How To Read Carton Labels Rated wire size (mm ) Mounting on multiple rail Spacing on rail Spacing 6 mm + 0,05 (.3") M /6 Block width on rail (mm) Standard block*
Directory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
ZS4-S-T Screw Clamp Terminal Blocks Disconnect with blade - with test socket
Technical Datasheet SNK64D00 Catalogue Page SNK64S00 ZS4-S-T Screw Clamp Terminal Blocks Disconnect with blade - with test socket - Ease your test operations with the built-in test sockets, - Screwdriver
RY2 miniature industrial relays
6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,
400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
Socket P2RF-05-S P2RF-08-S Clip & Release Lever R99-11 nameplate for MY
Screwless Clamp Terminal Socket Screwless clamping greatly contributes to reducing wiring time. No over or under tightening of cable connection so better contact reliability is achieved. Double wiring
V REG.-Nr. 115719, Z E135149 Technical data 2-pole 4-pole Rated current 12 A 6 A SCHRACK. Accessories Miniature Relay PT. General Purpose Relays
Accessories Miniature Relay PT Easy replacement of relays on a densely packed DIN rail No reduction of protection class or creepage/clearance with plastic retainer Plug-in indicator- and protection modules
UTS discrete wire sealing
Technical characteristics Mechanical Durability: 250 matings & unmatings Vibration resistance: Sinusoidal vibrations per CEI 605-4 - from 10 to 2000 Hz Thermal shock: 5 cycles 30 min. from -40 C to 105
HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000.
NTG-3000 Transducer Data Sheet Document Version 2.8 Page 1 of 10 Versions / Revisions: Document Creation Author Description version date 2.0 2012-07-25 P. Compensis First official version 2.1 2012-08-24
Fuses for Semiconductor Protection - Cylindrical Fuses. Class: Voltage ratings: Current ratings: Standards: Approvals: Features and Benefits
Fuses for Semiconductor Protection - Cylindrical Fuses SIBA cylindrical Ultra-Rapid fuses are available in six different sizes They can be ordered with an integral striker for blown fuse indication or
General Purpose Relays Accessories. Accessories Miniature Relay PT
Miniature Relay PT n Easy replacement of relays on a densely packed DIN rail n No reduction of protection class or creepage/clearance with plastic retainer n Plug-in indicator- and protection modules n
Jumper bar BJM. Assembled jumper bar BJD. Assembled jumper bar
BJ Jumper bar Use the BJ jumper bar to connect consecutive and nonconsecutive terminal blocks with the same spacing. Two types of jumper bars are available : an assembled unit and a nonassembled unit.
OPERATING INSTRUCTIONS
24 HOUR IMMERSION HEATER TIME CONTROLLER Cat. No TS900B OPERATING INSTRUCTIONS TS900B 24 Hour Immersion Heater Time Controller 24 hour programme ring Self-cancelling and Override switch Setting pins Time
400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
3-Component Measuring System
Force 3-omponent Measuring System for utting Force Measurement During Turning Modular system for measurement of cutting forces when turning outside and inside diameters on turret lathes. Machine adapters
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
ZS6-S Screw Clamp Terminal Blocks Disconnect with blade
Technical Datasheet SNK646D00 Catalogue Page SNK646S00 ZS6-S Screw Clamp Terminal Blocks Disconnect with blade - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,
08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
1 Introduction - Advice... 2. 2 Conductor Rails... 3. 3 Track Coupler... 4. 4 Power feeds... 5. 5 Air Gap Insulation Section... 6
Contents 1 Introduction - Advice... 2 2 Conductor Rails... 3 3 Track Coupler... 4 4 Power feeds... 5 5 Air Gap Insulation Section... 6 6 Expansion joints... 7 7 Anchor Caps... 8 8 End Caps (Distance between
COB panel supports for multipole connectors
TCQ + TSFS (...CMS, alternative) CMS TSFS Use The system makes it possible to use multipole connectors within electric panels without the traditional metallic housing as protection is assured by the electric
Set for PROFINET IO in IP20 TI-BL20-EN-PN-4
Cable max. 50 m between interface and read/write head Connection of up to 4 read/write heads via BL ident extension cables Mixed operation of HF and UHF read/ write heads Connectors /S2500 Type code Ident
14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. info@powermation.com - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
ZS4-SF1-T Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with test socket
Technical Datasheet SNK636D00 Catalogue Page SNK636S00 ZS-SF-T Screw Clamp Terminal Blocks For x 0 and x fuses - with test socket - Protect your circuit with x and x0 fuse terminal blocks (fuse not supplied
PCB transformers. Short circuit proof PCB transformer VB. General Data. Advantages. Applications. Circuit diagram. Standards & 1 Certifications W v
Short circuit PCB transformer General Data Rated input 230 Vac Rated output 6-2 x 24 Vac Rated power 0.35-3.2 VA Insulation class B Maximum ambient temperature 70 C Efficiency up to 58 % Degree of protection
Actuator-Sensor-Interface
Selection and ordering data Design Order No. Price Pack 3RX9 307-0AA00 3RX9 307-1AA00 4FD5 213-0AA10-1A 3RX9 305-1AA00 3RX9 306-1AA00 Single output IP 65 current 2.4 A Rated input voltage DC 24 V current
J TB/TW Temperature limiter, temperature monitor
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
HARTING Ethernet Cabling 4-poles Overview
Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] HARTING PushPull Connectors [on page 22] System cables [on page 24] Panel feed-throughs [on
This product can be assembled to the baseplate maintaining 5 mm center-to-center spacing. Thus any number of poles can end-to-end stack.
page 1/5 Plug-in Screw Connector System for Printed Circuit Boards 950-NLFL-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-NLFL-DS 950-NLFL & 971-SLK TECHNICAL INFORMATION Description This two
ZS25 Screw Clamp Terminal Blocks Feed-through
Technical Datasheet SNK668D0 Catalogue Page SNK678S0 ZS Screw Clamp Terminal Blocks Feed-through Save space by connecting conductors up to mm² AWG in just mm 0.47 in spacing. SNK68V004 SNK004F0000 D CAD
HARTING Ethernet Cabling 8-poles Overview
Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
Series 8146/5-V37 and Series 8150/5-V37
www.stahl.de > Clear assignment safe technology easy installation > Intelligent structure only one rotary actuator for frequency-controlled drives ) 20 ms leading auxiliary contact for safe motor disconnection
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
Automation Solutions. LÜTZE LCOS empty housing for Industrial Automation
Automation Solutions LÜTZE LCOS empty housing for Industrial Automation Open, modular, universal: The new intelligent electronic housing LÜTZE LCOS Flexible: Use of the housing as a standalone solution
Electronic housing BC for distributor boards
Electronic housing BC for distributor boards The requirements of modern building automation grow constantly and change with regard to comfort, control, intelligent linking of systems and their communication
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC
0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component.
Overview Switch and button modules The dimensions of the switch and button modules are adapted to the electronic components in the integral housing. The modules are equipped with the universal clip-on
Aluminium Standard. Technical Data. Included in delivery
luminium Standard UL / cul Robust aluminium enclosure for mechanical engineering and automation technology Fixing options for s and mounting plates Usable in wide temperature area Technical ata aterial:
Technical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5
Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis
IP 20 B.1 8 IP 65 / IP 67 B.1 22. Cables B.1 96. Tools B.1 104 IP 20 B.2 8 IP 65 / IP 67 B.2 22. Cables B.2 90. Tools B.2 100 IP 20 B.
Ethernet cabling Contents Page B Ethernet cabling Ethernet cabling overview B 2 Profil-specific Cabling 4-wires B.1 8 B.1 22 Cables B.1 96 Tools B.1 104 Structured Cabling 8-wires B.2 8 B.2 22 Cables B.2
NA1FC7T. Fuse holder terminal blocks
NAFC7T 00 Fuse holder terminal blocks T0077 009 Fuse holder terminal blocks for 5 x 0 mm and 5 x 5 mm fuses Compression clamp DIN - DIN Spacing 8 mm (.5") M 4/8.SF... Spacing 8 mm (.5") M 4/8.SFT Standard
gesis IP + Heavy Duty Class I, Zone 2
gesis IP + Heavy Duty gesis IP+ 20i HD Z2 Heavy-Duty Connectors for Class 1, Zone 2 Hazardous Locations Catalog 2012 Catch the Next Wave in Modular Connections Plug & Go Heavy-Duty Connectors for areas
Feed-through terminal blocks for high-current applications
596 PHOENIX CONTACT With the feed-through terminal blocks, you can freely select the connection technology. Choose between traditional screw connection, robust bolt connection, and convenient push-in connection
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
Powermate Range Pitch 7.62
owermate Range itch 7.62 in headers Socket connectors CB connection Solder connection SV 7.62/90 500 V / 43 A SV 7.62/180 500 V / 41 A.2.4 Cable connection Clamping yoke connection Tension clamp connection
G7SA. Ordering Information. Slim Plug-In Safety Relay. Slim Safety Relay for Machine Control. H Slim body only 13 x 24 x 50 mm
Slim Plug-In Safety Relay Slim Safety Relay for Machine Control H Slim body only 13 x 24 x 50 mm (six poles) H Four-pole and six-pole models are available H Terminal arrangement simplifies PCB pattern
Square D Clipsal DIN-Rail Four-Channel Auxiliary Input Unit
Square D Clipsal DIN-Rail Four-Channel Auxiliary Input Unit SLCLE5504AUX for Use with Wired C-Bus Networks Instruction Bulletin Retain for future use. Square D Clipsal DIN-Rail Four-Channel Auxiliary Input
Trapezoidal-Connectors Series TMC
Trapezoidal-Connectors Series TMC Subminiature-D Connectors to DIN 41 652/IEC 807-3 General Series TMC connectors are available in 5 different housing sizes with 9, 15, 25, 37 and 50 pins. In applications
H/L = Power supply. FN = Nominal Frequency. RN = Rated value of output burden. UN = Nominal input voltage. IN = Nominal input current.
Application : The transducer RISH CON - CA/CV (Fig.1) converts a sinusoidal AC Current or AC Voltage into a load independent DC Current or a load independent DC Voltage proportional to the measured value.
RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER
Application : The RISH CON - Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC Current or load independent DC Voltage.
EPIC CIRCON M23 Series Circular Signal Connectors
Circular Signal Connectors CIRCON M2 circular signal connectors are designed to DIN specification N698 and have a standard M2 threaded connection housing. They are offered in coupler, connector, and panel
PC 4/ 3-G-7,62. Extract from the online catalog. Order No.: 1804807
Extract from the online catalog PC 4/ 3-G-7,62 Order No.: 1804807 The figure shows a 5-pos. version of the product Header, Nominal current:, Nom. voltage: 400 V, Pitch: 7.62 mm, Number of positions: 3,
DEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050
Extract from the online catalog DEK-REL- 24/1/SEN Order No.: 2964050 Relay terminal block for sensor, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage
Programmable set for Ethernet Modbus/TCP in IP20 TI-BL20-PG-EN-8
CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps LEDs for display of supply voltage, group and bus errors as well as status and diagnostics Connection
Solenoid Valve Island Type 3965
Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and
Technical data sheet TDS0070
Technical data sheet TDS0070 ATEX Certified II 2 G Ex d IIC T4 Gb IECEx Certified Ex d IIC T4 Gb Ta = -20ºC to +60ºC FEATURES INCLUDE: - ATEX and IECEx Certified explosion proof Exd housing for Premier
Transmitter Actuator 230V wave UP 560. Operation
Transmitter ctuator 230V wave UP 560 5WG3 560-201 Product- and pplication Description Diagram The transmitter actuator 230V wave UP 560 (Diagram ) is a flush-mounted device with radio communication for
Magnetic field sensor for pneumatic cylinders BIM-INT-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, height 6mm Plastic, PA12 Magnetic-inductive sensor DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6
TECHNICAL DATASHEET Incremental Encoder RI 58-D / RI 58TD
Direct mounting without coupling Flexible hollow shaft design up to diameter 4 mm Through hollow shaft or as end shaft (blind shaft) Easy installation by means of clamping shaft or blind shaft Short overall
IEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
Product and functional description
Product and functional description The KNX / DALI gateway N 141/02 is a 4 MU wide, DINrail mounted KNX device with one DALI interface to which up to 64 DALI actuators (e.g. DALI ballasts) can be connected
Linear Luminaire for Fluorescent Lamps Series EXLUX 6001
> As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened
Mounting Plate / Screwdriver. Alignment Stickers Screws / Desiccant Bag / Double-sided Tape / Rubber Seal Plug / Rubber Washer
5000020G Warning Before Installation English Power off the Network Camera as soon as smoke or unusual odors are detected. Do not place the Network Camera on unsteady surfaces. Do not insert sharp or tiny
Intersection Preassembled 19-inch Rack
Intersection Preassembled 19-inch Rack The intersection preassembled 19-inch rack comes fully assembled, wired and ready to be installed in a server rack. The rack provides communications, power conversion
W DATA SHEET: RESIDUAL CURRENT CIRCUIT BREAKER 25-100A, SERIES BCF0 AND BCF6
W DATA SHEET: RESIDUAL CURRENT CIRCUIT BREAKER 25-100A, SERIES BCF0 AND BCF6 W SCHRACK-INFO Any mains connection If using 4-pole. switches with 3 or 2-poles, ensure connection acc. to assembly instructions
DBS720 / FDS221-R / FDS221-W Sounder base, Alarm sounders
DBS720 / FDS221-R / FDS221-W Sounder base, Alarm sounders For the automatic addressable detector bus C-NET Cerberus PRO Sounder base DBS720 11 selectable tones, 2 programmable activation levels Sound intensity
Product and Applications Description. Application Programs. Example of Operation. GAMMA instabus Technical Product-Information.
Product and Applications Description The power supply units N 125/x2 can supply DC 24 V power from an additional pair of terminals (yellowwhite). This DC 24 V output voltage can be used to power e.g. an
Set for Profibus DPV1 in IP20 TI-BL20-DPV1-8
Type code Ident no. 1545007 Number of channels 8 Dimensions (W x L x H) 110.3 x 128.9 x 74.4 mm Cable max. 50 m between interface and read/write head 2 decimal rotary coding switches for the adjustment
Terminal Boxes Series 8146
Series > Enclosures in shock-resistant glass fibre reinforced polyester resin > basic enclosure sizes various heights > Fitted according to the customer's requirements > For terminals up to max. 00 mm
3x cinch/s-video socket Order no.: 33 1532 xx. USB/3.5 mm audio socket Order no.: 33 1539 xx. VGA socket Order no.: 33 1540 xx
3x cinch/s-video socket Order no.: 33 1532 xx USB/3.5 mm audio socket Order no.: 33 1539 xx VGA socket Order no.: 33 1540 xx VGA socket with screw-in lift terminals Order no.: 33 1541 xx High definition
Main Catalog. Terminal blocks Insulation displacement ADO System
Main Catalog Terminal blocks displacement System Summary Presentation... - Selection guide... - - clamp connection... - 8 Feed through terminal blocks... Feed through terminal blocks - Double-deck...
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
CIN::APSE MICROMINIATURE D-SUB
INTRODUCTION CINCH has been producing filter connectors for years and has acquired an in depth knowledge of EMC protection. CINCH offers fast delivery on a wide range of standard filtered connectors and
PC 4/ 4-ST-7,62. Extract from the online catalog. Order No.: 1804920
Extract from the online catalog PC 4/ 4-ST-7,62 Order No.: 1804920 The figure shows a 5-pos. version of the product Plug component, nominal current:, rated voltage: 400 V, pitch: 7.62 mm, no. of positions:
Anderson Power Products
Anderson Power Products Anderson Power Products APP s philosophy is to provide products and services within the trading markets of our customers. We currently serve our world-wide customer base from customer
7000 Series Buccaneer
The all plastic and metal construction of the - circular that combine the ease of use of a quick coupling mechanism with proven environmental sealing for signal and mains power. Designed and independently
Relays High Capacity 50 Amp Mini Relays Standard Mini Relays Micro Relays Power Relays Connector Modules
CHIEF EN TERPRISES INC. M a s t e r I n t e r n a t i o n a l D i s t r i b u t o r Relays High Capacity 50 Amp Mini Relays Standard Mini Relays Micro Relays Power Relays Connector Modules M AS TER IN
Air damper actuators
4 634 OpenAir TM Air damper actuators GDB...1 GLB...1 Rotary version, / AC 230 V Electronic motor driven actuators for three-position and modulating control Nominal torque 5 Nm (GDB), 10 Nm (GLB) Mechanically
Temperature Sensors. Accessories. for Injection Molding. Types 6192B, 6193B,
Accessories Temperature Sensors for Injection Molding Types 6192B, 6193B, 6194B, 6195B Temperature sensors for measuring the contact temperature directly in the cavity at the surface of the solidified
Vario-Series Accessories
Accessories and spare parts for GMW analogue panel meters and controllers Current Transformers pages 2-9 Shunt Resistors 10-11 Voltage Dividers 12 Power supply for indicator/controllers 13 Blanking Plates
Electronic overload relay EF19 and EF45
Data sheet Electronic overload relay EF19 and EF45 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor
48 SERIES Relay interface modules 10 A
48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply
HERZ-Thermal Actuators
HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01
BETAtrans. Cables and Systems for Rolling Stock. Edition 2006
BETAtrans Cables and Systems for Rolling Stock. Edition 2006 Info Consulting and Sales By Phone To ask for Information or to place an order please use the following number: +49 (0)9172-6844-11 By Fax For
Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according
HARTING Ethernet Cabling 4-poles Overview
Ethernet Cabling 4-poles Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] Connectors [on page 22] System cables [on page 24] Panel feed-throughs
KNX Interface. User Manual PM00A00IRI
KNX Interface User Manual PM00A00IRI 1/9 1. Index 1. Index...2 2. Preface... 3 2.1. Overview... 3 2.2. System description... 3 2.3. Application programs... 3 2.4. Documentation... 3 3. Mechanical reference...
Rutenbeck Network Connection Box Cat. 5, shielded. Cable installation. UAE Connection Box Cat. 5 Operating Instructions.
Rutenbeck Network Connection Box Cat. 5, shielded 1-gang, 1 x 8-pole Order No.: 0180 00 2-gang, 2 x 8-pole Order No.: 0178 00 1-gang, (especially for channel construction) Order No.: 0802 00 2-gang, (especially