Compact Hydraulic Jacks and Heavy Lift Solutions. Quality. Safety. Value. Reliability.
|
|
- Cori Arnold
- 7 years ago
- Views:
Transcription
1 Compact Hydraulic Jacks and Heavy Lift Solutions
2 Compact Jacks 10 to 150 Tonne Capacity
3 We offer both the porta-power unit and the unique compact hydraulic jack. However, we recommend the compact hydraulic jack in most cases for its productivity, safety, reliability and to reduce your maintenance and purchasing costs through innovation, while improving quality. Shown top right is a 15 tonne Compact Jack weighing only 3.7 kgs.
4 Compact range up to 150 tonnes
5 Compact range strokes from 25mm to 75mm, solid piston, hollow or threaded hollow pistons
6 Simson - The only underwater and stand alone hydraulic power tools
7 The handle can be inserted in one of 2 positions and then rotated 360 o to any angle for tight situations (for full operation see movie on our website).
8 No hose, no quick couplings, no dirt ingress, no oil leaks. The ideal tool for fabrication and heavy industry.
9 Dyna bolt testing made easy in any position with a Compact jack, mounted with a manometer.
10 Pulling bush off with hollow Compact Jack Pushing bush on with hollow Compact Jack Compact Jack with hollow cylinder makes light work of pushing on or pulling off a bush. See website for full movie demonstration
11 If you re in a workshop maybe the long lead, power supply and pushing a trolley on a concrete floor you can live with. But when you re in the field or a mine site The largest Simson compact hydraulic jack, rated to 150 tonnes, even at 41 kgs, has significant portability benefits over the power pack on the left and significantly cheaper!
12 Other Simson Compact Power Tools 3.5 metres
13 Compact Lifting Wedge 10 tonne wedge 20 tonne wedge 3.5 metres Wedge fully extended 8mm gap is all you need for this 10 or 20 tonne rated compact lifting wedge, providing a parrallel lift and a 50mm stroke, in 10mm increments.
14 4 tonne Compact Flange Spreader
15 15 tonne Compact Flange Spreader only 5mm gap required. Comes in Compact or adaptor.
16 Ideal tool for removing conveyor drive gearboxes. Disc Extractor removing sprocket off shaft, while pushing against the shaft (demo / movie available on our website).
17 Compact Bearing Puller 2 or 3 leg clamps
18 Low Height Compact Jacks 43mm height for 10 tonne or 52mm height for 22 tonne
19 Use the Compact Extention or Straightening Kit. 15 tonne rating with extensions up to 2 metres 3.5 metres Cylinder, hose and pump and steel off cuts used for straightening, or...
20 Compact Nut Splitter
21 Sometimes off centre loading is unavoidable, but this is no problem with Simson s high quality jacks.
22 Purpose Built Compact Tools can be designed and built to customers requirements.
23 Do you have maintenance costs and reliability issues associated with the pumps, cylinders, hoses and fittings?
24 Image taken from data/assets/pdf_file/0003/84504/fipresentation.pdf With safety concerns of high pressure hydraulic hose incidents in mining (and heavy industry sectors) for 2,500 psi & 10,000 psi hydraulic hoses, doesn t it makes sense to move to the compact jack where ever possible, which eliminates the 10,000 psi rated hose?
25 Simson Purpose Built Lifting Solutions 3.5 metres
26 Customised synchrolift solution
27 Heavy Duty Locknut cylinders
28 South Korean shipbuilders are one of the largest users of leak free, reliable compact jacks and aluminium cylinders.
29 Simson heavy lift jacks used in ship building industry
30 Big or small, low height to super lift. We can help you with your lifting requirements.
31 Simson s high quality aluminium alloy cylinders are the highest quality aluminium cylinders in the market place.
32 Quality Manufacturing of Simson Power Tools
33 Manufactured in Europe to the highest standards.
34 Piston is a special, long life, roller bearing steel, which is through hardened to 56 HRc.
35 Cylinder is dropped forged, hardened steel with roller polish surface.
36 Rigid quality control (using micrometers) to ensure the cylinder will provide trouble free operational life.
37 High quality precision machined part, which is why Simson is the only cylinder/jack supplier that can guarantee 3 years warranty on materials and workmanship
38 Understanding the quality in the manufacturing process demonstrates why the Simson Jacks do not seize under off centre loads and are more reliable.
39 The same high quality goes into the Simson cylinders and the Compact Jacks.
40 Heavy Lift Jacks for Mining Vehicles and Locomotives Australian Designed and Built
41 Heavy Lift Jacks for surface and underground mining vehicles. Capacity from 25 to 150 tonnes.
42 Low Height Telescopic Jack Standard Jack Standard and low height telescopic Jacks for underground vehicles and other low profile vehicles.
43 Floor Stands and hand trucks to move around the Jack stands.
44 So please contact Henry or Steve today to assist you with your innovative and highly reliable Hydraulic lifting requirements. Ph
Front axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationAuxiliary Rams USERS MANUAL
Auxiliary Rams 2007 Chief Automotive Technologies, Inc. Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one
More informationPallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
More information!Hydraulic Jacks & Tools
!Hydraulic Jacks & Tools Why hydraulics? Hydraulics is the kind of power transmission which allows the greatest density of forces. There is no other kind of power transmission that will transmit comparable
More information367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube.
PUMPMASTER 2 accessories, other MOBILE oil dispensers PumpMaster 2 Accessories 01 OIL PUMPS 360 1 360 120 367 000 367 011 369 910 360 1 Wall bracket 360 120 Floor bracket 360 001 Bung adaptors 2" (M) connection
More informationLINEAR ACTUATORS. Linear Actuators. Linear Actuators. Linear Actuators are Actuators that creates motion in a straight line, as contrasted
LINEAR ACTUATORS Linear Actuators Linear Actuators Linear Actuators are Actuators that creates motion in a straight line, as contrasted with circular motion of a conventional electric motor. Linear actuators
More informationELLIOTT COLLET STYLE Baffle Expander With Hydraulic Power Supply
TM-37 07-29-04 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors & torque
More informationWASTE OIL DRAINERS 99. Waste oil drainers
WASTE OIL DRAINERS 99 8 100 WASTE OIL DRAINERS wheel-mounted for drums 20/220 kg Art. 42050 (20/60 kg) Art. 42000 (180/220 kg) Art. 42050 Waste oil drainer for tanks or drums composed of: art. 80050 Trolley
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationOperating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
More informationPRODUCT HIRE LIST PRODUCT HIRE LIST HIRE - SALES - REPAIR - TESTING LIFTING EQUIPMENT & ENGINEERING SUPPLIES SPECIALISTS
PRODUCT HIRE LIST PRODUCT HIRE LIST 2014 PRICES ON REQUEST All products also available for purchase LIFTING EQUIPMENT & ENGINEERING SUPPLIES SPECIALISTS HIRE - SALES - REPAIR - TESTING INTRODUCTION THE
More informationFAG Hydraulic nuts. Technical Product Information
FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationPART 2 FORKLIFT HYDRAULIC SYSTEM
PART 2 FORKLIFT HYDRAULIC SYSTEM Chapter 1 Description and Operation Component Locations & Circuit Layouts 1 Hydraulic Pump 11 Control Valve 14 Valve Section Oil Flows 15 Anti-Cavitation Valve 22 Velocity
More informationCAM-03, Camshaft Assembly Oil Seal Replacement
CAM-03, Camshaft Assembly Oil Seal Replacement Tools Jack stands Floor Jack Metric Socket set Metric Wrench set Porsche Timing Belt Tension tool (P9201) Flywheel Lock (P9206) Balance Shaft Pin Spanner
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More informationFAG tools for mechanical mounting and dismounting of rolling bearings. Technical Product Information
FAG tools for mechanical mounting and dismounting of rolling bearings Technical Product Information Contents Mechanical mounting and dismounting of rolling bearings 2 Tools for mounting 4 Mounting tool
More informationRange Road RR Series Semi-Automatic Firewood Processor. Crated Unit Assembly Manual
Range Road RR Series Semi-Automatic Firewood Processor Crated Unit Assembly Manual 1 1) Undo 8-18mm x 19mm Nuts and bolts, 2 on each leg of top frame 2) Lift top of Metal crate off and move out of work
More information1-800-295-5510 uline.com SPECIFICATIONS
H-1394, H-1395, H-1396 H-1397, H-3859, H-3860 π GRAVITY CONVEYOR 1-800-295-5510 uline.com SPECIFICATIONS Conveyor Bed Width In (mm) 18, 24, 30 (457, 610, 762) Load Capacity Per Linear Foot (305mm) Lbs
More informationPropeller Equipment Sale. For Questions please contact Dan Cork Propdoc@aol.com 918-636-3567
Propeller Equipment Sale For Questions please contact Dan Cork Propdoc@aol.com 918-636-3567 Propeller Equipment Sale The equipment for sale is used in the repair and overhaul of aircraft propellers. Propeller
More informationINSTALLATION INSTRUCTIONS. 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113)
INSTALLATION INSTRUCTIONS 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113) Thank you for purchasing a quality Hellwig Product. PLEASE
More informationHEAVY DUTY SEVERING AND BEVELLING MACHINE TNO FAB-SERIES
HEAVY DUTY SEVERING AND BEVELLING MACHINE TNO FAB-SERIES PROTEM USA LLC 29340 Industrial Way, # 402 Evergreen, CO 80439 USA Phone: +1 303 955 4862 Fax: +1 303 955 5904 contact@protemusa.com www.protemusa.com
More informationBelt Tensioning Methods for Small Package Conveyors What s the best solution?
Belt Tensioning Methods for Small Package Conveyors What s the best solution? Industrial White Paper By: Michael A. Hosch, P.E. Dorner Mfg. Corp. 975 Cottonwood Avenue Hartland, WI 53029 USA Phone: 800
More informationRIVET BUSTERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1038 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill and attach an in-line oiler to the air tool. Use air
More informationLINEAR MOTION CONTROL
LINEAR MOTION CONTROL Technical Data Sheet Static Locks RLSS Series Nexen s new generation of linear holding/locking devices take rod locking technology to the next level. With superior performance, these
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER: SUPPLIER: CONTACT: DATE: E-mail: VALIDITY: 1 month Dear Sir, In the attached file you will find the proposal and specification(s) for the ASK
More informationA technical guide to Shell tactic emv
A technical guide to Shell Tactic EMV TABLE OF CONTENTS SECTION PAGES Introduction 3 Benefits of Short Re-Lubrication Intervals 5 Contamination Prevention Strategies 6 Workplace Safety and Efficiency Gains
More informationLOADING DOCK EQUIPMENT. A. Section 03100 - Concrete Forms and Accessories: Placement of anchors into concrete.
LOADING DOCK EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES A. Loading dock equipment of the following types: 1. Dock lifts. 2. Control stations. 1.2 RELATED SECTIONS A. Section 03100 - Concrete Forms and
More informationINSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS
INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS SETTING UP THE PRESS FOR OPERATION For shipping convenience, the gauge, pump handle, hoist crank, screw nose and base angles
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER: CONTACT PERSON: DATE: E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
More informationTITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V
TITAN pt. no.: 02 0000 0143 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationDrive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
More informationTHE ONLY CRANE WITH 10 HYDRAULIC EXTENSIONS. New Model Presentation - VR85
THE ONLY CRANE WITH 10 HYDRAULIC EXTENSIONS New Model Presentation In this presentation, we will outline the innovations and technical advances integrated into the new 90 tonne metre crane of the Amco
More informationYUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
More informationModel No: VS4815 1. SAFETY INSTRUCTIONS VS4800 2. INTRODUCTION & APPLICATIONS VS4815 3. CONTENTS. 2.1 Introduction. 2.
Instructions for: Petrol Engine Twin Camshaft Setting / Locking Tool Kit - (incorporating Vanos Alignment) - BMW N42 & N46 Engines Model No: VS4800 Associated kit: Camshaft/Carrier Bracket Remover & Installer
More informationROUNDO 3-Roll Plate Bending Machines Type PS
ROUNDO 3-Roll Plate Bending Machines Type PS Universal Machine used for all Plate Bending Double Pinch Design 1. Align the plate using the alignment grooves in the lower rolls or against the rear roll.
More informationB098N USERS: MACHINE MANUFACTURERS DRAUGHTSMEN OPERATORS MAINTENANCE WORKERS ANY OTHERS
INSTRUCTION MANUAL TRAVELLING BEAM DEVICE MANUAL CODE B098N USERS: MACHINE MANUFACTURERS DRAUGHTSMEN OPERATORS MAINTENANCE WORKERS ANY OTHERS REV. DESCRIZIONE REDATTO/GESTITO APPROVATO COD. IDENT. PAGINE
More informationChief S21M PARTS MANUAL. 2005 Chief Automotive Technologies
Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date
More information18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS SKATES LIFTING TABLES HAND TROLLEYS PLATFORM HAND TRUCKS SKATES SKATE 1500KG for moving machines and equipment duration oiled metal wheels
More informationcbperformance.com Please read this entire brochure prior to installing your CB Performance Products MAGNASPARK II distributor.
- Easy -wire installation with no external spark box necessary, but can be used with one. - Precision CNC machining and hand assembled construction. This is a premium product. - Accurate super hot spark
More informationPUMP MAINTENANCE SCHEDULE AND CHECKLISTS
PUMP MAINTENANCE SCHEDULE AND CHECKLISTS Providing a maintenance schedule defined specifically by run hours or yardage pumped serves only as a general guideline given the large amount of variables a unit
More informationService Manual Rol-Lift
R 2000 Service Manual Rol-Lift Series: T and E Developed by Generic Parts Service This manual is intended for basic service and maintenance of the Rol-Lift pallet jack. The pallet jacks you are servicing
More informationThis kit may void factory warranty please check with manufacturer.
Thank you for purchasing a Sinister Manufacturing Company EGR delete kit. Precision manufactured using the highest grade 304 stainless steel and 6061 billet aluminum; this EGR kit is designed to endure
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER : CONTACT PERSON : DATE : E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
More informationREPAIR INSTRUCTIONS UNDER BODY CYLINDER (UM, UL)
Table of contents 1. Introduction... 3 1.1. Scope of use... 3 1.2. General remarks... 3 1.3. Contact Hyva... 3 1.4. Precautions... 4 1.5. Spare parts... 4 1.5.1. Prior to use... 4 1.6. Recycling and Reuse
More informationInstallation, operation and maintenance manual
Installation, operation and maintenance manual TWO POST LIFT HCT2.1AL30 HCT2.1AL40 HCT2.5AL30 HCT2.5AL40 READ THIS ENTIRE MANUAL BEFORE INSTALLATION TO ENSURE A CORRECT OPERATION AND LONG SERVICE LIFE
More informationM113 VEHICLE FAMILY RUBBER TRACK INSTALLATION INSTRUCTIONS SOUCY TRACK SYSTEM 04-M113-1ENS (SPLIT IDLER) Litho d in Canada 1 04-M113-1ENS
M113 VEHICLE FAMILY RUBBER TRACK INSTALLATION INSTRUCTIONS (SPLIT IDLER) 1 # TABLE OF CONTENTS List of parts and tools................................................3 Installation of complete kit...................................................5
More informationAPPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks
TITAN pt. no.: 03 0000 0120 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationWork Smart - Not Hard with a Blue Giant Lift Table
Lift Tables Hydraulic Lift Tables Eliminate the need to bend, twist and pick up heavy loads manually. Let BLUE GIANT Lift Tables increase productivity and decrease costly injuries caused by overexertion
More informationAprilia.no. RS 50 96-98 Eng.6M
01 Carburettor - oil pump 02 Drive shaft 03 Head - piston 04 Primary gear shaft 05 Gearbox driven shaft 06 Selector 07 Clutch 08 Clutch cover 09 Right crankcase 10 Left crankcase 11 Ignition unit RS 50
More informationFILTRATION AMIAD PLASTIC FILTERS, SCREENS & DISCS
4 AMIAD PLASTIC FILTERS, SCREENS & DISCS Max pressure 10.0 Bar, max temperature 60 O 3/4 to 1 1/2 bodies manufactured from polyacetal 2 bodies and above manufactured from polymade and glass fibre 3/4 to
More information9,000lb capacity 4 Post Lift Installation Manual
9,000lb capacity 4 Post Lift Installation Manual Parts Checklist 1 Main side track with 9/16 hole on cylinder end complete with cylinder, hose and connector 1 Offside track 2 Cross Rails pre-assembled
More informationCleaning of floor coverings. Vacuum Cleaners Brush-Type Vacuum Cleaners Spray Extractors Single Disc Machines Cleaning Machines - Cleanser
Cleaning of floor coverings Vacuum Cleaners Brush-Type Vacuum Cleaners Spray Extractors Single Disc Machines Cleaning Machines - Cleanser 135 7 Cleaning of floor coverings Vacuum Cleaners for Everyday
More informationMUSTANG II IFS COMPLETE PARTS PACKAGE
MUSTANG II IFS COMPLETE PARTS PACKAGE Your Southern Rods & Parts Mustang II IFS Parts Package contains the following items: 1 pr) Upper Control Arms (2023) 1) Upper Arm Bolt Kit (MP-001-A) 1 pr) Lower
More informationWaste Oil Handling, Spill Containment & Lighting
58 Waste Oil Handling, Spill Containment & Lighting 372000 SAMOA Mobile Waste Oil Drainer & Extractor Drains and/or extracts waste oil from cars and light commercial vehicles Drain bowl capacity of 20
More information1300 MAXTRAK SPECIFICATION
CONE CRUSHER Crusher type: Liners: Standard concave: Lubrication: Adjustment: Control: Concave options: 1300 Automax Crusher. Manganese steel alloy mantle and concave. Medium Coarse. Pumped system having
More informationDavcron Concrete Agitator - Operations Manual
Davcron Concrete Agitator - Operations Manual THE DAVCRON AGITATOR MUST BE OPERATED BY TRAINED AND AUTHORISED PERSONNEL ONLY DAVCRON ENGINEERING PTY LTD General Engineering & Maintenance Contractors -
More informationTRANS-05, Torque Tube Removal, Rebuilding, and Installation
TRANS-05, Torque Tube Removal, Rebuilding, and Installation Tools Metric Wrench Set Metric Socket Set Jack Stands (6 minimum) Floor Jack 8mm Cheesehead socket (also referred to as 12 point internal socket
More informationAESCO/MADSEN. Self-Erect Silos by AESCO/MADSEN
AESCO/MADSEN Self-Erect Silos by AESCO/MADSEN AESCO/MADSEN manufactures two self-erecting silos called the WM-Series. The WM-50 has a 50-ton silo and the WM-80 has an 80-ton. The WM Series comes complete
More informationSTEERING HANDLEBAR/FRONT WHEEL/ FRONT SHOCK ABSORBER
14 14 STEERING HANDLEBAR/FRONT WHEEL/ SCHEMATIC DRAWING ------------------------------------------------- 14-1 SERVICE INFORMATION------------------------------------------------ 14-2 TROUBLESHOOTING-----------------------------------------------------
More informationRaptor high-performance cone crushers
Raptor high-performance cone crushers Raptor high-performance cone crushers Key value statements Largest cone crusher in the world (Raptor 000) Most diverse product line on the market Continual focus on
More informationFlash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
More informationDrum Brake Owners Manual
Drum Brake Owners Manual TIE DOWN ENGINEERING, Inc. 5901 Wheaton Drive, Atlanta, GA 30336 www.tiedown.com (404) 344-0000 Fax (404) 349-0401 2007 TIE DOWN ENGINEERING, INC. ALL RIGHTS RESERVED Instruction
More informationBelt Conveyor System
Belt Driven Conveyors the cost effective solution for transporting unit loads. Systems Handling Services range of powered belt conveyors is designed for applications where improved load control and speed
More informationEngine, disassembling and assembling
13-1 Engine, disassembling and assembling Note: Replace the oil cooler and thoroughly clean the oil passages if you find metal shavings or larger quantities of small metal particles in the engine oil,
More information413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
More informationFJ2. 2 Ton Trolley Floor Jack Assembly & Operating Instructions
FJ2 2 Ton Trolley Floor Jack Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
More information2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure
2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure Derek Guenther 1/28/2015 Rev. Purpose The purpose of this document is to describe the procedure necessary to replace one of the ball nuts
More informationProviding Answers For All Your Machine Tool Needs
Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION
More informationLight Duty Balancers. Medium Duty Balancers. Heavy Duty Balancers. Hose Reel Balancers. Standard Stroke 2.00 m. Capacity: 4 to 25 kg
IRAX Spring Hose Reel Light Duty Medium Duty Intermediate Duty Bal. Heavy Duty Super Duty Selection Chart This is linked to the specification pages. By clicking on the light grey boxes, you will open automatically
More informationHAND PALLET TRUCK Lift-Rite
HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).
More informationCOMPACT. Drilling COMPACT
COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.
More informationChief EZ Liner S21 PARTS MANUAL. 1999 Chief Automotive Systems, Inc.
Chief EZ Liner S21 R 1999 Chief Automotive Systems, Inc. CHIEF EZ LINER CHIEF S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Systems, Inc. warrants for one year from date of installation and/or
More informationEXCAVATOR SAFETY TRAINING
EXCAVATOR SAFETY TRAINING INSPECTION CHECKLIST INSPECTION AREA INSPECTION RESULTS Sat. Unsat. N/A Comments Carrier & Car Body Rotation system Tracks Rollers Frame, welds, bolts Drive system Upper Structure
More informationINSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb
INSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb NOTE: Progress Technology products should only be installed by a qualified licensed mechanic experienced in the installation
More information4 PISTON BRAKE CALIPERS AND ROTORS
Installation Instructions 4 PISTON BRKE CLIPERS ND ROTORS TTENTION Statements in these instructions that are preceded by the following words are of special significance: Warning This means there is the
More informationPaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
More informationMaxi-Stamper. 200 to 1,000 Tons STAMPING OUT DOWNTIME
TM Maxi-Stamper 200 to 1,000 Tons STAMPING OUT DOWNTIME Standard Features Steel Fabricated Construction Drive Capacity Rated 1/2 Above Bottom of Stroke Self-Diagnostic Solid State Controller Moveable Operator
More informationOil Dampers with Fixings on. Both Ends. Damping Engineering Oil Dampers with Fixings on Both Ends. Technical Data
amping Engineering Oil ampers with Fixings on Both Ends Oil dampers with fixings on both ends are used when moving objects may not exceed a certain speed e.g. flaps, lids, lever arms. They are fixed at
More informationINSTALLATION INSTRUCTIONS. 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD IMPORTANT NOTES
INSTALLATION INSTRUCTIONS 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD Thank you for purchasing a quality Hellwig Product. PLEASE READ THIS INSTRUCTION SHEET COMPLETELY
More informationStainless Linear Motion Rolling Guide series
products are avaiable from: MARYLAND METRICS phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329 P.O.Box 261 Owings Mills, MD 21117 USA URL: http://mdmetric.com E-mail: sales@mdmetric.com
More informationUnited Kingdom Sweden Germany Switzerland USA, Canada and Mexico China Japan France Linear Units Y07 GB Asia Pacific Italy EU-200502-03 03JUL
Linear Units Linear Units Table of Contents Introduction... 5 Introduction... 5 How to Choose a Unit...6-7 Technical Introduction...8 - Linear Units with Ball Screw Drive and Ball Guide... 3 Introduction...
More informationHYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationSTORAGE SYSTEMS PUSH BACK RACK SYSTEMS. Innovative Solutions for Storage and Material Handling Systems
STORAGE SYSTEMS PUSH BACK RACK SYSTEMS Innovative Solutions for Storage and Material Handling Systems Konstant.com PUSH BACK OVERVIEW Konstant patented Push Pack rack system provides selectivity in the
More informationOverview PARTS LIST. B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve washer
Overview READ ENTIRE INSTRUCTIONS BEFORE STARTING INSTALLATION PARTS LIST A. Flush valve B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve
More informationEVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING Revised for ACCESS TO APPRENTICESHIP
EVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING for ACCESS TO APPRENTICESHIP SCIENCE SKILLS SIMPLE MACHINES & MECHANICAL ADVANTAGE AN ACADEMIC SKILLS MANUAL for The Construction Trades: Mechanical
More informationOwner s Manual DANDY LIFT. Model # Serial # Placed in Service. Southworth Products Corp
Owner s Manual DANDY LIFT For model numbers UDL-50, UDL-50, UDA-350W, UDA-500 & UDA-800, this manual is for Serial number L-48493 and up, and for machines manufactured in September 0 and newer. For older
More informationPALLET JACK - 2.5 TON
PALLET JACK - 2.5 TON 39939 SET UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury.
More informationDUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400
More informationOperating Instructions Hand pallet trucks HU Profi. Issue 08.2000
Operating Instructions Hand pallet trucks HU Profi Issue 08.2000 Index 1 Introduction 1.1 Product description 1.2 General information on service and maintenance 1.3 Spare parts 1.4 Dimensions 2 Correct
More informationM A N U A L 13-10-05
Documentation The following information sheets illustrate the description below: 12-WW01-4G-E Sectional view of the lance with main dimensions 12-W101-6G-E Sectional view of the head of the lance with
More informationIndustrial Cutting Equipment. includes new Concrete Crusher
Industrial Cutting Equipment includes new Concrete Crusher LUKAS Industrial Cutting Equipment The demand for environmentally-friendly disposal and recycling of used or discarded products within highly
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationEQUALIZER International Limited Range of Mechanical & Hydraulic Flange Spreading Wedges Operator Instruction Manual. B bestflangespreader
EQUALIZER International Limited Range of Mechanical & Hydraulic Flange Spreading Wedges Operator Instruction Manual B bestflangespreader com INDEX THE EQUALIZER RANGE OF MECHANICAL & HYDRAULIC SPREADING
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationSense it! Connect it! Bus it! Solve it! EncoderS
Sense it! Connect it! Bus it! Solve it! EncoderS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
More information