Tools Needed to Finish Your Projects
|
|
|
- Howard McDaniel
- 7 years ago
- Views:
Transcription
1 PVC Pipe Fittings a. 90 Elbows S x S b. 90 Elbows S x FPT c. 90 Eblows FPT x FPT d. 90 Street Elbows MPT x FPT e. 90 Street Elbows MPT x S f. 90 Street Elbows Spigot x Slip g. 90 Side Outlet Elbows h. 45 Elbows S x S i. Tees S x S x S j. Tees S x S x FPT k. Tees Threaded FPT x FPT l. Couplings S x S m. Threaded Couplings FPT x FPT n. Male Adapters MPT x S o. Female Adapters FPT x S p. Bushings Spigot x S r. Threaded Bushing s. Caps S t. Threaded Caps FPT u. Square Head Plugs S v. Threaded Square Head Plugs MPT w. Unions x. Crosses S x S x S a S y. Riser Extenders & Poly Cut Off Nipples MPT x FPT
2 Tools Needed to Finish Your Projects
3 PVC Pipe Fittings / 90 Degree Elbows /2" S x S /4" S x S " S x S /4" S x S /2" S x S " S x S PVC 90 Degree Elbows - Slip x Slip /4" x 1/2" S x S " x 1/2" S x S PVC 90 Degree Reducing " x 3/4" S x S Elbows - Slip x Slip /2" S x FPT /4" S x FPT PVC 90 Degree Combination " S x FPT Elbows /4" S x FPT Slip x FPT /2" S x FPT " S x FPT /2" x 3/4" S x FPT /4" x 1/2" S x FPT " x 1/2" S x FPT " x 3/4" S x FPT
4 PVC Pipe Fittings / 90 Degree Elbows PVC 90 Degree Threaded Elbows - FPT x FPT /2" FPT x FPT /4" FPT x FPT " FPT x FPT /4" FPT x FPT /2" FPT x FPT " FPT x FPT PVC 45 Degree Elbows - Slip x Slip /2" S x S /4" S x S " S x S /4" S x S /2" S x S " S x S PVC 90 Degree Threaded Street Elbows - MPT x FPT /2" MPT x FPT /4" MPT x FPT " MPT x FPT /4" MPT x FPT /2" MPT x FPT " MPT x FPT /4" x 1/2" MPT x FPT *Representation of products mentioned within does not reflect any type of endorsement by the manufacturuer. Products mentioned in this catalog that are manufactured by and for ROC Industries are not OEM manufactured or licensed unless stated otherwise. For additional information, refer to the terms and conditions of sale. 271
5 PVC Pipe Fittings / 90 Degree Street Elbows /2" MPT x S /4" MPT x S PVC 90 Degree Street Elbows - Slip x MIPT /2" SPGT x S /4" SPGT x S PVC 90 Degree Street " SPGT x S Elbows /4" SPGT x S Spigot x Slip /2" SPGT x S " SPGT x S /2" S x S /4" S x S " S x S /4" S x S /2" S x S " S x S PVC Unions - Slip x Slip 272
6 PVC Pipe Fittings / Square Head Plugs PVC Square Head Plugs - Slip /2" S /4" S " S /4" S /2" S " S PVC Female Adapters - FPT x S /2" FPT x S /4" FPT x S " FPT x S /4" FPT x S /2" FPT x S " FPT x S /2" x 3/4" FPT x S /2" x 1" FPT x S /4" x 1/2" FPT x S /4" x 1" FPT x S " x 3/4" FPT x S PVC 90 Degree Side Outlet Elbows - Slip x Slip x Slip /2" *Representation of products mentioned within does not reflect any type of endorsement by the manufacturuer. Products mentioned in this catalog that are manufactured by and for ROC Industries are not OEM manufactured or licensed unless stated otherwise. For additional information, refer to the terms and conditions of sale. 273
7 PVC Pipe Fittings / 90 Degree Side Outlet Elbows /2" x 1/2" /4" x 3/4" PVC 90 Degree Side Outlet Elbows - Slip x Slip x FPT /2" SSS /4" SSS " SSS /4" SSS /2" SSS " SSS PVC Tees - Slip x Slip x Slip /2" x 1/2" x 3/4" /4" x 1/2" x 1/2" /4" x 1/2" x 3/4" /4" x 3/4" x 1/2" /4" x 3/4" x 1" " x 1" x 1/2" " x 1" x 3/4" /4"x1 1/4"x1/2" /4"x1 1/4"x3/4" /4"x1 1/4"x1" /2"x1 1/2"x1/2" /2"x1 1/2"x3/4" " x 1" x 1 1/2" /2" x 1 1/2" x 1" /2"x1 1/2"x1 1/4" " x 2" x 1/2" /2" x 1 1/2" x 2" PVC Reducing Tees - Slip x Slip x Slip 274
8 PVC Pipe Fittings / Tees S X S X S PVC Reducing Tees - Slip x Slip x Slip " x 2" x 3/4" " x 2" x 1" " x 2" x 1 1/4" " x 2" x 1 1/2" PVC Threaded Outlet Tees - Slip x Slip x FPT /2" S x S x FPT /4" S x S x FPT " S x S x FPT /4" S x S x FPT /2" S x S x FPT " S x S x FPT PVC Reducing Threaded Outlet Tees - Slip x Slip x FPT /2" x 1/2" x 3/4" /4" x 1/2" x 1/2" /4" x 3/4" x 1/2" " x 1" x 1/2" " x 1" x 3/4" /4"x1 1/4"x1/2" /4"x1 1/4"x3/4" /4" x 1 1/4" x 1" /2"x1 1/2"x1/2" /2"x1 1/2"x3/4" /2" x 1 1/2" x 1" /2"x1 1/2"x1 1/4" " x 2" x 1/2" " x 2" x 3/4" " x 2" x 1" " x 2" x 1 1/2" *Representation of products mentioned within does not reflect any type of endorsement by the manufacturuer. Products mentioned in this catalog that are manufactured by and for ROC Industries are not OEM manufactured or licensed unless stated otherwise. For additional information, refer to the terms and conditions of sale. 275
9 PVC Pipe Fittings / Tees Threaded FPT X FPT /2" threaded /4" threaded " threaded /2" threaded PVC Threaded Tees - FPT x FPT x FPT /2" S x S /4" S x S " S x S /4" S x S /2" S x S " S x S PVC Couplings - Slip x Slip /2" threaded /4" threaded " threaded PVC Threaded Couplings - FPT x FPT 276
10 PVC Pipe Fittings / Male Adapters MPT X S PVC Male Adapters - MPT x Slip /2" MPT x S /4" MPT x S " MPT x S /4" MPT x S /2" MPT x S " MPT x S /2" x 2" MPT x S /4" x 1/2" MPT x S /4" x 1" MPT x S " x 1/2" MPT x S " x 3/4" MPT x S " x 1 1/4" MPT x S /4" x 1" MPT x S /4"x1 1/2" MPTxS /2"x1 1/4" MPTxS " x 1 1/2" MPT x S PVC Reducing Bushings - Spigot x Slip /4" x 1/2" " x 1/2" " x 3/4" /4" x 1/2" /4 x 3/4" /4" x 1" /2" x 1/2" /2" x 3/4" /2" x 1" /2" x 1 1/4" " x 1/2" " x 3/4" " x 1" " x 1 1/4" " x 1 1/2" *Representation of products mentioned within does not reflect any type of endorsement by the manufacturuer. Products mentioned in this catalog that are manufactured by and for ROC Industries are not OEM manufactured or licensed unless stated otherwise. For additional information, refer to the terms and conditions of sale. 277
11 PVC Pipe Fittings / Bushings Spigot X FPT /4" x 1/2" " x 1/2" PVC Threaded Reducing " x 3/4" Bushings /4" x 1/2" Spigot x FPT /4" x 3/4" /4" x 1" /2" x 1/2" /2" x 3/4" /2" x 1" /2" x 1 1/4" " x 1/2" " x 3/4" " x 1" " x 1 1/4" " x 1 1/2" /4" x 1/2" PVC Threaded Bushing - MPT x FPT /2" S /4" S " S /4" S /2" S " S PVC Caps - Slip 278
12 PVC Pipe Fittings / Threaded Caps FPT PVC Threaded Caps - FPT /2" FPT /4" FPT " FPT /4" FPT /2" FPT " FPT PVC Threaded Plugs - MPT /2" MPT /4" MPT " MPT /4" MPT /2" MPT " MPT PVC Crosses - Slip x Slip x Slip x Slip - Schedule /2" SSSS /4" SSSS " SSSS /4" SSSS /2" SSSS " SSSS *Representation of products mentioned within does not reflect any type of endorsement by the manufacturuer. Products mentioned in this catalog that are manufactured by and for ROC Industries are not OEM manufactured or licensed unless stated otherwise. For additional information, refer to the terms and conditions of sale. 279
13 PVC Pipe Fittings / Ri.Extdrs&Poly Cut Off Nip.MPTxfpt /2" /4" " Riser Extender for Sprinklers - MPT x FPT /2" x 6" Poly Sprinkler Cut-off Riser - MPT x MPT - cut to desired length 280
ABS DWV FITTINGS ABS-0215 FEBRUARY 2015 SUPERCEDES ABS-1214 ASTM D2661
ABS DWV FITTINGS ABS-0215 FEBRUARY 2015 SUPERCEDES ABS-1214 ASTM D2661 COUPLING 1 1/4" 601112 125 9,000 2.60 1 1/2" 601120 125 9,000 1.74 2" 601138 100 4,800 2.34 3" 601146 45 1,440 6.57 4" 601153 25 800
Plumbing Lesson Five: Pipe Fittings and Parts. Student Handouts
Lesson Five: Pipe Fittings and Parts Student Handouts Building Basics was paid for under an EL Civics grant from the U. S. Department of Education administered by the Virginia Department of Education.
Plumbing Lesson Five: Pipe Fittings and Parts. Facilitator Guide
Lesson Five: Pipe Fittings and Parts Facilitator Guide Building Basics was paid for under an EL Civics grant from the U. S. Department of Education administered by the Virginia Department of Education.
Hose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
Residential Commercial
& Residential Commercial Irrigation Products Catalog Current Pricing LASCO SWIVEL JOINTS First Digit Base Part Number Tor R Step 1 Step 2 Step 3 - Step 4 Step Step Specify Standard or Regulated Swivel
倀 䰀 唀 䴀 䈀 䤀 一 䜀 刀 䄀 䤀 一 圀 䄀 吀 䔀 刀 匀 夀 匀 吀 䔀 䴀 匀
倀 䰀 唀 䴀 䈀 䤀 一 䜀 刀 䄀 䤀 一 圀 䄀 吀 䔀 刀 匀 夀 匀 吀 䔀 䴀 匀 眀 眀 眀 最 攀 渀 漀 瘀 愀 瀀 爀 漀 搀 甀 挀 琀 猀 挀 漀 洀 㠀 ⴀ 㔀 ⴀ 㜀 㐀 㠀 㠀 September 2015 R.F. Williams, Michigan Master Plumber, License No. 04287 (left) R.M. Williams, Michigan
Based on SG GSA Fire & Security Products Contract GS-07F-0396M, Mod PO-0099 January 30, 2013
SimplexGrinnell TXMAS ecommerce Ferguson Fire and Fabrication Sprinkler Price List Based on SG GSA Fire & Security Products Contract GS-07F-0396M, Mod PO-0099 January 30, 2013 Product ID Description TXMAS
Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
SYSTEM PLUMBING KIT INSTALLATION, OPERATION & SERVICE MANUAL. PENTAIR POOL PRODUCTS CORPORATE OFFICE Sanford, NC (919) 775-4151
TANDEM SYSTEM PLUMBING KIT INSTALLATION, OPERATION & SERVICE MANUAL PENTAIR POOL PRODUCTS CORPORATE OFFICE Sanfd, NC (919) 775-4151 PENTAIR POOL PRODUCTS Mopark, CA (805) 523-2400 TANDEM SYSTEM PLUMBING
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
Section 10. Contain-It Secondary Containment Piping System. Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Section 10 ontain-it Secondary ontainment Piping System Glossary S = ontain-it Socket SPG = Spigot End (same dimension as pipe outside diameter) MPT = Male Pipe Thread FPT = Female Pipe Thread Product
Copper Meter Resetters
Copper Meter Resetters To Set 5/8", 5/8" x 3/4", 3/4", 1", 1 1 2" & 2" Water Meters 11/12 Table of Contents Page Page Meter Resetters 5/8", 5/8" x 3/4", 3/4", & 1" Horizontal Inlet and Outlet Series 710
PArt# spout Length Adjusts. 33308 8 7-1/2 to 8-1/2 33310 10 7-1/2 to 8-1/2 33312 12 7-1/2 to 8-1/2 33314 14 7-1/2 to 8-1/2. PArt# FIts Adjusts
The Best Plumbing Specialties. One Source. FAucet - commercial FAucet - WALL Mount - heavy duty - 8 centres Institutional Quality - Specification Grade Contemporary Design - Individually Pressure Tested
PLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS
8-1 BRONZE GATE VALVES 125 psi. SWP 200 psi WOG Threaded ends Non-rising stem Solid wedge disc DOMESTIC IMPORT PART # 40300250 1/4 40300260 40300251 3/8 40300261 40300252 1/2 40300262 40300206 3/4 40300263
Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
BRASS FITTINGS FOR THREADED PIPES
03/14 BRASS FITTINGS GENERAL FEATURES The brass fittings for threaded pipes are used as junctions for pipelines with threaded connection UNI ISO 228/1. The thread dimensions are subdivided in various types
HIGHLAND VALLEY SUPPLY, INC STANDARD TERMS AND CONDITONS OF SALE
Electrical Conduit & Fittings Catalog HIGHLAND VALLEY SUPPLY, INC STANDARD TERMS AND CONDITONS OF SALE Payment Terms: Payment terms are printed on every invoice. Invoices not paid in full by the net due
Transport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.
Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index
PVC Irrigation Manifold Systems
Discount Code(s): 019 Irrigation Manifolds 901 Miscellaneous Components Item prices may have changed from those shown in this sheet. See Spears On-line Catalog for most current pricing, updated daily.
16001 cross - pair 0 200 37 16002 lever - pair 0 400 19. 16003 pair w/wrench 0 100 17. 16004 cross - pair 0 100 35 16005 lever - pair 0 100 33
Faucet Repair a. Fit All Handles b. ROC Faucet Repair Parts c. Generic American Standard Replacement Parts d. Generic Central Brass Replacement Parts e. Generic Chicago Faucet Replacement Parts f. Generic
MINING PRICE LIST EFFECTIVE SEPTEMBER 1, 2015 WWW.NETAFIMUSA.COM
N E T A F I M U S A MINING PRICE LIST EFFECTIVE SEPTEMBER, 205 WWW.NETAFIMUSA.COM 2 MINING DIVISION PRICE LIST SEPTEMBER, 205 WWW.NETAFIMUSA.COM TABLE OF CONTENTS Ordering Information... 4 Terms and Conditions...
Product Catalogue Australian Plumbing Fittings
Capillary Sizes ELBOWS - 90 Degree J08123 15mm x 15mm 90Deg LE Cu SR ELB F+F (No. 12) J08131 18mm x 18mm 90Deg LE Cu ELB F+F (No. 12) J08145 20mm x 20mm 90Deg LE Cu SR ELB F+F (No. 12) J08147 20mm x 15mm
SYSTEM PLUMBING KIT INSTALLATION, OPERATION & SERVICE MANUAL. PENTAIR POOL PRODUCTS CORPORATE OFFICE Sanford, NC (919) 566-8000
TANDEM SYSTEM PLUMBING KIT INSTALLATION, OPERATION & SERVICE MANUAL PENTAIR POOL PRODUCTS CORPORATE OFFICE Sanfd, NC (99) 566-8000 PENTAIR POOL PRODUCTS Mopark, CA (805) 53-00 P/N 599 REV. A TANDEM SYSTEM
INSTALLATION INSTRUCTIONS GEO-BOOSTER TM
Table of Contents General Description 1 Parts list 1 Installation 2 New Ground Loop 2 Retrofit 4 Temporary 6 Troubleshooting 8 INSTALLATION INSTRUCTIONS GEO-BOOSTER TM General Description The Geo-Booster
Above Ground Fittings. Below Ground Fittings. tooling
C O N T E N T S Above Ground Fittings Crimp House Entry Tee 3 Crimp House Entry Tee Body 3 Building Entry Tee 3 Factory Entry Elbow 4 Meter Box Adaptors Crimp C Clip Meter Box Adaptor 4 Crimp Stab-in Meter
Temperature Adaptor. Vacuum Tree
Temperature Adaptor Temperature Adaptor Temperature Adaptor B0N Ford XY on 6 cyl B02N Ford XF on 6 cyl B0N Ford XE-XF 6 cyl B0N Ford 20 Eng. Tree of 2 BN Ford 20 Eng. Tree of BP Ford 20 Eng. Tree of Water
Cajon VCR Fittings. Flanges, Fittings, & Components. Cajon & Swagelok Fittings. Cajon VCR Fittings. Nuts, Caps, & Plugs. Socket Weld Glands
Cajon VCR Fittings Cajon VCR Fittings Make excellent low-pressure gas connections Ideal for lecture bottle gas cylinders, standard helium checks, and general gas plumbing Withstand bakeout to 58º C (with
*** MAIN VERSION OF BOM ***
*** MAIN VERSION OF BOM *** This is the main parts list for the 2013-2014 FTC game. The parts are listed in different categories (such as "Field Elements, "Hardware," "Wood," etc.). The item numbers assigned
High Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
SUBDRAINS AND FOOTING DRAIN COLLECTORS. A. Construct subdrains, subdrain cleanouts and outlets, and footing drain collectors.
SUBDRAINS AND FOOTING DRAIN COLLECTORS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Subdrains B. Subdrain Cleanouts and Outlets C. Footing Drain Collectors D. Storm Sewer Service and Connections 1.02 DESCRIPTION
Stainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide
", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com OCTOBER 2 C- BULLETIN A.C.V.I.M.,
GEBCO (PTY) LTD - Netafim Product List - 1st August 2011
AQUANET PLUS & ITEC CONTROLLERS Globe - Solenoid, Manual Override and Mechanical Throttle Aquanet Valve - DC 20 mm BSP Valve (Solenoid Valve) 34500-001000 Aquanet Valve - DC 25 mm BSP Valve (Solenoid Valve)
DRAFT 1 PIPE & PORT 4-28-06
JI Fittings DRAFT PIPE & PORT 4-8-06 The Fitting Authority 4300 Catalog JI Fittings F3T4 BPT / 30 Flare PNMT4 FNMT4 Cap V3T4 BPT / 30 Flare C3T4 BPT / 30 Flare 30 Flare F3P4 BPT / 60 Cone P4 Union G3P4
WATER MEASUREMENT USING TWO INCH (50 mm) DRAIN TESTS
GAP.14.1.2.2 A Publication of Global Asset Protection Services LLC WATER MEASUREMENT USING TWO INCH (50 mm) DRAIN TESTS INTRODUCTION A hydrant or other large-volume flow test is necessary for proper water
LIMITED WARRANTY. Some products and sizes may be discontinued when stock is depleted, or may require a minimum quantity for ordering.
LIMITED WRRNTY radford, a division of Dixon Valve and Coupling Company, (herein called "radford") warrants the products described herein, and manufactured by radford to be free from defects in material
H41 Electrical Stage Aft Air Conditioner Unit Installation
Aft Air Conditioner Unit Installation 1. Place Air-Cond unit in A/C shelf with air return facing fwd direction of the boat. 2. Do not secure Air-Cond Unit on shelf, install both side of air condition ABS
Indirect-Fired Storage Water Heater Models WH-30 through WH-80 INSTALLATION AND OPERATING INSTRUCTIONS
Indirect-Fired Storage Water Heater Models WH-30 through WH-80 INSTALLATION AND OPERATING INSTRUCTIONS Contents Page Ratings and Specifications..................... 2 Installation Requirements......................
Home. News. Products. Contact Us. Treated Swagelok Fittings--for better inertness!
New GC Accessories New GC Accessories New GC Accessories Fittings: Swagelok : Home Brass & Stainless Steel News Also available: Products Silco Fittings : Siltek & Sulfinert Also available: Info & Support
LS 2540 SEWER LATERALS AND INSPECTION TEES
LS 2540 SEWER LATERALS AND INSPECTION TEES A. Summary B. Submittals C. Site Information D. Sewer Pipe and Fittings E. Lateral Locations F. Lateral Installation G. Inspection Tee Installation H. Removal
Product Knowledge Guide. (Updated May 2015) BR-PK 2004-2015 Charlotte Pipe and Foundry Company.
Product Knowledge Guide (Updated May 2015) BR-PK 2004-2015 Charlotte Pipe and Foundry Company. You can t beat the system. Charlotte Pipe s Retail Division Charlotte Pipe and Foundry Company is the largest
MICRO IRRIGATION Product Overview
MICRO IRRIGATION Product Overview RESIDENTIAL & COMMERCIAL IRRIGATION Built on Innovation hunterindustries.com Hunter s Full Line of MICRO IRRIGATION PRODUCTS Hunter now has a complete system of commercial-grade
REQUEST FOR QUOTE STANDING OFFER NO. 2016-131 SUPPLY AND DELIVERY OF WATERWORKS FITTINGS
REQUEST FOR QUOTE STANDING OFFER NO. 2016-131 SUPPLY AND DELIVERY OF WATERWORKS FITTINGS Capital Regional District Integrated Water Services 479 Island Highway Victoria, BC V9B 1H7 Tel: 250.474.9600 Fax:
SEPTIC SYSTEM CONSTRUCTION REQUIREMENTS ST. MARY S COUNTY HEALTH DEPARTMENT
SEPTIC SYSTEM CONSTRUCTION REQUIREMENTS ST. MARY S COUNTY HEALTH DEPARTMENT The following are minimum requirements for installation of conventional trench sewage disposal systems in St. Mary s County,
LAYERED GREEN ROOF DETAILS
LAYERED GREEN ROOF DETAILS LGR1.01 LGR1.02 LGR1.03 LGR2.01 LGR2.02 LGR2.03 LGR3.01 LGR3.02 LGR3.02 LGR4.01 LGR5.01 LGR5.02 LGR5.03 LGR5.04 LGR5.05 LGR6.01 [A-D] EXTENSIVE GREEN ROOF [A-C] SEMI-INTENSIVE
Pipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
sales@fabfit.com.au TRADE PRODUCT GUIDE MAKE THE RITE CONNECTION WWW.FABFIT.COM.AU www.fabfit.com.au Page a
Page a TRADE PRODUCT GUIDE MAKE THE RITE CONNECTION WWW.FABFIT.COM.AU Manufacturers and distributors of plumbing fittings. Fabfit Certification The following trade products guide details the range of plumbing
Note: All dimensions are nominal. All weights are for shipping purposes only. Availability is subject to change.
CHANNEL DrAiNS Durable Designed for maximum durability and drainage, NDS Channel Drains are a proven alternative to traditional concrete drains. UV inhibitors in the grates, channel and component parts
EFFECTIVE FEBRUARY 2014. note: drainage permit required to call for a dampproof inspection
EFFECTIVE FEBRUARY 2014 note: drainage permit required to call for a dampproof inspection 1. ROOF DRAINS/DECK DRAINS (INTERIOR ) All roof and deck drains within the perimeter of the building shall be APPROVED
BICYCLE PUMP AIR PRESSURE ROCKETS Credit: Jeff Elmer, Physics Teacher, Oshkosh North High School
BICYCLE PUMP AIR PRESSURE ROCKETS Credit: Jeff Elmer, Physics Teacher, Oshkosh North High School Concepts Illustrated: (1) Forced air flight and Newton s 3 rd Law (2) Stability and aerodynamics of rocket
COPPER METER SETTERS 6-08. A.Y. McDONALD MFG. CO. WATER SERVICE PRODUCTS. TO SET 5/8", 5/8" X 3/4", 3/4", 1", 1 1/2", and 2" Water Meters
COPPER METER SETTERS TO SET 5/8", 5/8" X 3/4", 3/4", 1", 1 1/2", and 2" Water Meters A.Y. McDONALD MFG. CO. WATER SERVICE PRODUCTS 608 A.Y. M c Donald Mfg. Co. is pleased to present its extensive line
DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for
Constructing Cistern Installations
Constructing Cistern Installations for Stormwater Management Downspout Screened inlet Overflow David McDonald & Bob Spencer Seattle Public Utilities Installing Rain Gardens & Cisterns Trainings for contractors,
SIMPLAIR PIPING. www.irtools.com 1-800-376-TOOL
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
IMPORTANT NOTE TO POTENTIAL BIDDERS
Page 1 IMPORTANT NOTE TO POTENTIAL BIDDERS By submitting this Request for Bids, you are asking the County to accept your offer for the sale of goods or services. It is important that you READ and UNDERSTAND
MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
AUTOMATIC BATTERY FILLING SYSTEM
1 AUTOMATIC BATTERY FILLING SYSTEM BFS offers a complete system : float-operated watering plugs. All parts are manufactured in acid-proof plastic material. hoses in transparent PVC. all the necessary connectors
CLEANOUT FEATURES. KLEENATRON II Features CLEANOUTS
CLEANOUT FEATURES KLEENATRON II Features JOSAM KLEENATRON II Cleanouts incorporate features developed to meet the latest in building construction methods. These features ensure the specifier, installer
Residential Sprinkler System Design Handbook
Residential Sprinkler System Design Handbook A Step-By-Step Introduction to Design and Installation The Irrigation Innovators This booklet is intended to be used when designing and installing small single
Installation Manual DIAPHRAGM WELL TANK
Installation Manual DIAPHRAGM WELL TANK Safety Instructions Installation Warranty IN-LINE SERIES: 2-5 & 7 GALLON HORIZONTAL SERIES: 7-14 & 20 GALLON VERTICAL SERIES: 14-20-32-36-52-86-96-119 GALLON KEEP
LIST PRICE BOOK MALLEABLE CAST IRON PRESS FITTINGS FOR SCH. 10 40 BLACK & GALVANIZED STEEL PIPE
FASTLOCK fittings are not currently approved for use with gas or fire protection applications. FITTINGS FOR STEEL PIPE LIST PRICE BOOK MALLEABLE CAST IRON FITTINGS FOR SCH. 10 40 BLACK & GALVANIZED STEEL
REFER TO SPECIFICATIONS AND STANDARD PLANS FOR DETAILED WATER METER, METER VAULT, AND SERVICE LINE REQUIREMENTS
GENERAL REQUIREMENTS METER, METER VAULT, AND SERVICE LINE REFER TO SPECIFICATIONS AND STANDARD PLANS FOR DETAILED METER, METER VAULT, AND SERVICE LINE REQUIREMENTS METER & METER VAULT: 1. METER AND RADIOREAD
ALTRA 400 Operator Manual. Planographs and Wiring Diagrams
Planographs and Wiring Diagrams 16 Altra 400 Final Assembly All Altras w/head # Part # Description Specific Use (if any) 1 60323A Tank Assy, Altra 400 115 Volt model 60358A Tank Assy, Altra 400 SP 230
Plumbing Specialties
CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 FAX (323) 890-4456 WWW.SMITHCOOPER.COM Plumbing Specialties QUALITY Most manufacturing facilities are certified to ISO standards ISO Quality Plus
Fuel Tank Pickup Modifications-Dmax
Fuel Tank Pickup Modifications-Dmax The Duramax Fuel sending unit pickup assembly is very restrictive and not designed to provide the large volume of fuel required to support high horsepower numbers. It
Layout Guide. Easy, step-by-step, underground sprinkler system layout guide FREE SPRINKLER SYSTEM DESIGN. See page 5 for details
07WTM003045 53251-01 re.qxd 3/2/07 2:30 PM Page 1 Layout Guide Easy, step-by-step, underground sprinkler system layout guide FREE SPRINKLER SYSTEM DESIGN See page 5 for details Planning & Design Flow 3/4
Institutional Quality - specification Grade Contemporary design - Individually Pressure tested
The Best Plumbing Specialties. One Source. FAuCEt - Institutional Quality - specification Grade Contemporary design - Individually Pressure tested FAuCEt - WALL MOuNt - HEAvy duty - 8 CENtREs - 1/2 FIP
MODEL #320 - (* Using Bromine tablets with this device is not NSF certified)
RAINBOW CHLORINE/BROMINE* FEEDER MODEL #320 - (* Using Bromine tablets with this device is not NSF certified) Features: No special venting required. Completely enclosed-no escaping gases. Positive external
Flare Fittings. The World Standard. SAE 45 Flared Fittings... D4. Inverted Flared Fittings... D14. Access Valves... D18
Flare Fittings SAE 45 Flared Fittings... 4 Inverted Flared Fittings... 14 Access Valves... 18 The World Standard Flare Fittings Flare to ale PT 48F ale Connector 481FH ale Connector AVU1 ale Connector
GYROLOK to Tube Union
GYROLOK HOKE manufactured GYROLOK tube fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application capabilities. GYROLOK to Tube Union MANUFACTURED
AFE424 SERVICE PARTS
This is the parts list for the AFE. When looking up part numbers, always check the complete model and serial numbers to be certain of ordering the correct parts. The Air Cooled model has also been manufactured
Defining Quality. Building Comfort. Heating and Cooling Coils
Defining Quality. Building Comfort. Heating and Cooling Coils Heating and Cooling Coils Heating and Cooling Coils For over 20 years, AAON has supplied the coil needs of industrial and commercial HVAC customers.
DOUBLE CONTAINMENT DESIGN & INSTALLATION GUIDE
DC-3-0708 Spears Double Systems are engineered for ease of installation and lower associated installation costs. Complete systems include all necessary components - carrier pipe, containment pipe, centralizer
Repair Parts Defender 3PT Sprayer LGS-50 Sprayer Utility Skid Sprayer Repair Parts
Defender PT Sprayer LGS-0 Sprayer Utility Skid Sprayer Repair Parts Defender Tank and Frame Assembly... Defender Pump and Control Plumbing... LGS-0 Tank and Frame Assembly... LGS-0 Pump and Control Plumbing...
Appendix WC. Fire Hydrant & Hose Reel Metering Arrangements
Appendix WC The following four types of metering arrangements have been approved for particular applications. Metering Arrangement No 1- M-19 SDCV (Single Detector Check Valve) assembly with bypass meter.
/2" F.I.P. x 1 /2" F.I.P. LEAD FREE PP23883LF 12" 1 Per Hangtag. 15"H x 1.5"W 03337 0 - - 25 6.5.23
E-z Faucet supply tubes. Vinyl /8" comp. x /2" F.I.P. PP2860LF 2" Per Hangtag. "H x."w 09 6 - - 2.2.2 E-z Faucet supply tubes. Vinyl /2" F.I.P. x /2" F.I.P. PP288LF 2" Per Hangtag. "H x."w 07 0 - - 2 6..2
Stainless Steel Tubular Products
Stainless Steel Tubular Products r Disclaimer This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary
OPERATING INSTRUCTIONS AND PARTS LIST FOR U075075 U100058 UNDERGROUND HOSE REELS
OPERATING INSTRUCTIONS AND PARTS LIST FOR U075075 U0005 FORM NO.: 3-00 REV: RAIN BIRD CORPORATION ONE REELCRAFT CENTER COLUMBIA CITY, IN 675 (00) -33 / (60) - FAX: (60) -605 U0005 MODEL NUMBER SIGNIFICANCE
Irrigation. part of a continuing series of water-wise workshops. ...a few good things to know. by Jean Marsh 951-736-8941
Irrigation...a few good things to know part of a continuing series of water-wise workshops by Jean Marsh 951-736-8941 Irrigation 101 Introduction The intention of this workshop is to give you some information,
Many Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
Industrial Strength Rocket Launcher
Industrial Strength Rocket Launcher Description: Instructions for the construction of an industrial strength rocket launcher for use with paper rockets. Materials: Schedule 40 PVC piping and bushings from
SECTION LS 2530 SANITARY SEWERS. A. General: Submit the following in accordance with The General Conditions.
SECTION LS 2530 SANITARY SEWERS PART 1 GENERAL 1.1 SUBMITTALS A. General: Submit the following in accordance with The General Conditions. 1. Product data for drainage piping specialties. 2. Shop drawings
AIR LINE VALVES AND GAUGES
AIR LINE VALVES AND GAUGES INGERSOLL-RAND AIR LINE VALVES AND GAUGES Maintaining consistent air pressure throughout the entire system is crucial for maximum performance and productivity. Ingersoll-Rand
Fittings, Tubing & Nipples
s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and
APPENDIX A RECOMMENDED RULES FOR SIZING THE WATER SUPPLY SYSTEM
APPENDIX A RECOMMENDED RULES FOR SIZING THE WATER SUPPLY SYSTEM Because of the variable conditions encountered, it is impractical to lay down definite detailed rules of procedure for determining the sizes
FUEL SYSTEMS OUR PARTS PUT YOU IN THE PASSING LANE. Protect your fuel system. velvac.com
OUR PARTS PUT YOU IN THE PASSING LANE FUEL SYSTEMS Protect your fuel system. Velvac offers a wide range of locking fuel caps and anti-siphon tubes to keep unlawful occurances at bay. With OEM approved
NOBLE. MODIFYING SPOT SPRAYERS for Broadcast Pasture/Lawn Use. Authors: Eddie Funderburg, Jeff Ball, Jim Johnson and David Annis NF-SO-04-01
T H E S A M U E L R O B E R T S NOBLE F O U N D A T I O N AGRICULTURAL DIVISION MODIFYING SPOT SPRAYERS for Broadcast Pasture/Lawn Use Authors: Eddie Funderburg, Jeff Ball, Jim Johnson and David Annis
San Antonio Water System Standard Specifications for Construction ITEM NO. 854 SANITARY SEWER LATERALS
San Antonio Water System Standard Specifications for Construction ITEM NO. 854 SANITARY SEWER LATERALS 854.1 DESCRIPTION: This item shall govern sanitary sewer laterals installed in accordance with these
1-800-654-3872 1-405-273-6302
Anodeless Risers Transition Risers Compression Risers Riser Accessories Transition Risers and Transitions The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com Risers and Transitions:
Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
Delta Fire manufacture and supply a comprehensive range of Marine Fire Fighting Equipment.
Marine FIRE FIGHTING Equipment Delta Fire manufacture and supply a comprehensive range of Marine Fire Fighting Equipment. The recent aquisition of the Foundrite range of international couplings, fittings
Cost Evaluation of Black Steel Pipe and Galvanized Pipe When Using a Nitrogen Generator
Cost Evaluation of Black Steel Pipe and Galvanized Pipe When Using a Nitrogen Generator Andy L. Kaempfer Business Development Manager Potter Electric Signal Company, LLC 1609 Park 370 Place St. Louis,
Installation Manual DIAPHRAGM WELL TANK
Installation Manual DIAPHRAGM WELL TANK IN-LINE SERIES: 2-5 & 7 GALLON VERTICAL SERIES: 14-20-25-32-36-52-65-86-96-119 GALLON HORIZONTAL SERIES: 7-14 & 20 GALLON NO LEAD NO LEAD: The weighted average of
Drip Irrigation. Design Guide. www.irrigationdirect.com
Y O U R P E R S O N A L Drip Irrigation Design Guide www.irrigationdirect.com Table of Contents General Overview...2 History & Origin... 2 Advantages & Benefits... 2, 3 Anatomy of a Drip System... 3 Water
Replacement parts. WM97+ gas-fired water boiler Boiler Manual. OBTAIN PARTS ONLY THROUGH WEIL-McLAIN THE BOILER CONTAINS CERAMIC FIBER MATERIALS
Replacement parts DO NOT SERVICE THE BOILER WITHOUT A WM97+ MAINTENANCE KIT AVAILABLE Failure to adhere to these guidelines can result in severe personal injury, death or substantial property damage. The
Schedule 40 & Schedule 80 Rigid PVC Piping Systems Scroll Down for Dimensions, Components, Hangars & Supports, Fabrication Techniques
Schedule 40 & Schedule 80 Rigid PVC Piping Systems Scroll Down for Dimensions, Components, Hangars & Supports, Fabrication Techniques Schedule 40 Rigid PVC Piping Systems SCHEDULE 40 - DIMENSIONS Harvel
SECTION 02630 STORM DRAINAGE SYSTEM
SECTION 02630 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for storm drainage systems including modifications and connections to existing storm drainage systems. 1.02 REFERENCE
USER MANUAL. 10 GPM Small Single Line Cryogenic Coupling
JC Carter LLC LNG Couplings USER MANUAL 10 GPM Small Single Line Cryogenic Coupling Models 50E722 Nozzle and 50E721 Receptacle User s Manual and Installation Guide! Warning: Read the User s Manual and