Appendix WC. Fire Hydrant & Hose Reel Metering Arrangements

Size: px

Start display at page:

Download "Appendix WC. Fire Hydrant & Hose Reel Metering Arrangements"

Jonathan Bell
7 years ago
Views:

1 Appendix WC The following four types of metering arrangements have been approved for particular applications. Metering Arrangement No 1- M-19 SDCV (Single Detector Check Valve) assembly with bypass meter. Or M-17 SDCV assembly with bypass meter. (Bypass meter 25, 32 or 40 mm to be sized according to the customer requirements, the number of Fire Hose Reels or whether the Fire and Domestic Services are combined.) Metering Arrangement No 2- Electro-magnetic Flow Meter. Metering Arrangement No 3- M-16 or 17 meter assembly for Domestic supply, M-17 or 19 SDCV assembly with bypass meter for fire service (Arrangement No.1). Metering Arrangement No 4- M-19 SDCV bypass assembly with bypass meter. Or M-17 SDCV bypass assembly with bypass meter. (To be installed where the fire and domestic supply are combined and an uninterrupted supply is required. Bypass meter to be 25, 32 or 40 mm.) Typical details for Metering Arrangement No.1, 2, 3 and 4 are shown in Figures 1, 2, 3 and 4 respectively. The approved metering arrangements for various fire service configurations and property title classifications shown in Figures 5 to 9 are also included in this Appendix. Detail requirements for the metering arrangements shall include: (a) (b) (c) (d) (e) Installation of the arrangements, which will be delivered to the site by QUU, shall be carried out by either QUU maintenance staff or a licensed plumbing contractor. The arrangements shall be provided with an area as shown in Typical Metering Arrangements No. 1 to 4. The areas shall have unrestricted access from the street frontage of the site at all times. Where practicable, electro-magnetic flow meters shall be located within private properties at the front of the building and close to the boundary. Where the flow meter may be designed on footway location, the road owner s written permission shall be obtained before the design can be approved by the Utility. The location of electro-magnetic flow meter shall be determined at the design stage. The spring settings on SDCVs shall be calibrated to allow maximum flow rate through the bypass meter. The type of SDCV used shall be authorised by QUU. Date of Issue April 2011 Appendix WC - Supplementary Manual WSA 03. Page 1 of 11

(Bypass meter 25, 32 or 40 mm to be sized according to the customer requirements, the number of Fire Hose Reels or whether the Fire and Domestic Services are combined.

2 All new fire services shall be metered. Existing fire services, where significant alterations or renovations are proposed that require a Water Approval under QUU s Connections Policy shall also be metered. Fire services includes any services supplying water to sprinkler, hydrant or hose reel systems, either separately or in any combination. The metering arrangement to be used is dependent on the particular application. Fire and domestic services shall be metered separately except for townhouse style community title scheme master meters, combined hose reel and domestic services designed in accordance with AS 2441 or where otherwise approved by QUU. The property service for a sprinkler system may branch off a property service used for other purposes on the service provider side of the customer connection point, avoiding the need for a separate water main connection for the sprinkler system. In such an arrangement, the sprinkler branch shall not supply any service other than sprinkler systems, and sprinkler systems shall only be supplied from the sprinkler branch. However, for multistorey buildings greater than two stories in height, the sprinkler branch may also supply hydrant and hose reel systems in accordance with AS (but not domestic systems). Where water delivered to a fire sprinkler system in accordance with Australian Standards Automatic Fire Sprinkler Systems AS or AS is proposed to pass through a mechanical meter, a performance based solution document endorsed by a registered professional engineer of Queensland (RPEQ) is to be submitted to the relevant council's plumbing services group for approval. This document is not required for non-mechanical meters such as Magflow or other meters with full bore flow and negligible headloss. Date of Issue April 2011 Appendix WC - Supplementary Manual WSA 03. Page 2 of 11

Fire services includes any services supplying water to sprinkler, hydrant or hose reel systems, either separately or in any combination.

3 TYPICAL METERING ARRANGEMENT No 1 Ø100 (150) M-19 SDCV assembly with bypass meter Fittings for Ø100 (150) M-19 SDCV assembly with bypass meter (150) x 6mm meter insertion gaskets (150) Metcoat gasket kit (150) flanged 316 S/steel tees (150) flanged 316 S/steel J risers (150) DF 316 S/steel spacer (150) DF valve (150) SDCV with dirt box 2 Ø40 S/steel plugs Bypass meter size to be 25, 32 or 40mm. Ø100 (150) M-17 SDCV assembly with bypass meter Fittings for Ø100 (150) M-17 SDCV assembly with bypass meter (150) x 6mm meter insertion gaskets (150) DF valves SDCV with dirt box with bypass meter 25, 32 or 40mm 2 Ø40 S/Steel plugs Figure 1 Date of Issue April 2011 Appendix WC - Supplementary Manual WSA 03. Page 3 of 11

Ø40 S/steel plugs Bypass meter size to be 25, 32 or 40mm.

4 TYPICAL METERING ARRANGEMENT No 2 Ø100, 150 or 200 flow meter installation details Pipe size Ø Inlet Length L Depth to invert H (Approx.) Figure 2 Date of Issue April 2011 Appendix WC - Supplementary Manual WSA 03. Page 4 of 11

1500 750 200 2000 1200 Depth to invert H (Approx.

5 TYPICAL METERING ARRANGEMENT No 3 Ø100 (150) M-16 bypass assembly with Ø100 (150) meter Fittings for M-16 bypass assembly Ø100 (150) meter (150) x 6 meter-insertion gaskets (150) Metcoat gasket kit x 100 (150 x 150) flanged SS316 tees (150) flanged SS316 S risers (150) DF valves 100 (150) dirt box & meter Ø100 (150) M-17 bypass assembly with Ø100 (150) meter Fittings for M-17 bypass assembly Ø100 (150) meter (150) x 6 meter-insertion gaskets (150) Metcoat gasket kit x 100 (150 x 150) flanged SS316 tees (150) DF SS o elbows (150) DF valves (150) dirt box & meter Figure 3 Date of Issue April 2011 Appendix WC - Supplementary Manual WSA 03. Page 5 of 11

assembly with Ø100 (150) meter Fittings for M-17 bypass assembly Ø100 (150) meter 2 100 (150) x 6 meter-insertion gaskets 1 100 (150) Metcoat gasket kit 2 100 x 100 (150 x 150)

6 TYPICAL METERING ARRANGEMENT No 4. Ø100 (150) M-19 SDCV bypass assembly with bypass meter Fittings for Ø100 (150) M-19 SDCV bypass assembly with bypass meter (150) x 6mm meter insertion gaskets (150) Metcoat gasket kit (150) FL 316 S/steel tees (150) FL 316 S/steel S riser pipes (150) DF valve (150) SDCV with dirt box Bypass meter size to be 25, 32 or 40mm. Ø100 (150) M-17 SDCV bypass assembly with bypass meter Fittings for Ø100 (150) M-17 SDCV bypass assembly with bypass meter (150) x 6mm meter insertion gaskets (150) Metcoat gasket kit (150) FL 316 S/steel tees (150) 90 O DF 316 S/steel elbows (150) DF valves (150) SDCV with dirt box Bypass meter size to be 25, 32 or 40mm. Figure 4 Date of Issue April 2011 Appendix WC - Supplementary Manual WSA 03. Page 6 of 11

100 (150) FL 316 S/steel tees 2 100 (150) FL 316 S/steel S riser pipes 3 100 (150) DF valve 1 100 (150) SDCV with dirt box Bypass meter size to be 25, 32 or 40mm.

7 Commercial/Residential Community Title Approved Metering Arrangements Metering Arrangement No. 1 M-19 SDCV assembly depending on scale of development with 25, 32 or 40 mm bypass meter. Metering Arrangement No. 2 Electro-magnetic Flow Meter Metering Arrangement No. 4 M-19 SDCV bypass assembly with bypass meter 25, 32 or 40 mm. (Where an uninterrupted supply is required.) Figure 5 Community Title only. Ownership of fire main by Body Corporate. Maintenance of SDCV and meter by Utility. Date of Issue April 2011 Appendix WC - Supplementary Manual WSA 03. Page 7 of 11

2 Electro-magnetic Flow Meter Metering Arrangement No. 4 M-19 SDCV bypass assembly with bypass meter 25, 32 or 40 mm.

8 Commercial/Residential Freehold Approved Metering Arrangements Metering Arrangement No. 1 M-19 SDCV assembly depending on scale of development with 25, 32 or 40 mm bypass meter. Metering Arrangement No. 2 Electro-magnetic Flow Meter. Figure 6 Private fire hydrant only required for one allotment. Ownership of fire main by the owner of that allotment. Private Fire hydrant required by two or more allotments. Ownership of fire main by the Body Corporate (or legal entity) Maintenance of SDCV and meter by Utility. Domestic services to each lot shall be provided from Utility reticulation water main. Date of Issue April 2011 Appendix WC - Supplementary Manual WSA 03. Page 8 of 11

Figure 6 Private fire hydrant only required for one allotment. Ownership of fire main by the owner of that allotment.

9 Community Title Subdivision For probable simultaneous domestic demand < 7 l/s (as per AS/NZS ) Approved Metering Arrangements Metering Arrangement No. 1 M-19 SDCV assembly depending on scale of development with 25, 32 or 40 mm bypass meter. Metering Arrangement No. 4 M-19 SDCV bypass assembly with bypass meter 25, 32 or 40 mm. (Where an uninterrupted supply is required.) Figure 7 Ownership of fire main by Body Corporate. Maintenance of SDCV and meter by Utility. Date of Issue April 2011 Appendix WC - Supplementary Manual WSA 03. Page 9 of 11

1 M-19 SDCV assembly depending on scale of development with 25, 32 or 40 mm bypass meter. Metering Arrangement No.

10 Community Title Subdivision For probable simultaneous domestic demand > 7 l/s (as per AS/NZS ) Approved Metering Arrangements Metering Arrangement No. 2 Electro-magnetic Flow Meter. Figure 8 Ownership of fire main by Body Corporate. Maintenance of Mag Flow meter by Utility. Date of Issue April 2011 Appendix WC - Supplementary Manual WSA 03. Page 10 of 11

2 Electro-magnetic Flow Meter. Figure 8 Ownership of fire main by Body Corporate.

11 Residential/Commercial High Rise Approved Metering Arrangements Metering Arrangement No.1 M-17 or 19 SDCV assembly depending on scale of development with 25, 32 or 40 mm bypass meter. Metering Arrangement No.2 Electro-magnetic Flow Meter. Metering Arrangement No.3 for dual supply For domestic supply: M-16 or 17 meter assembly. For fire supply: M-17 or 19 SDCV assembly with bypass meter. Metering Arrangement No. 4 M-17 or 19 SDCV bypass assembly with bypass meter 25, 32 or 40 mm. (Where an uninterrupted supply is required.) Figure 9 Date of Issue April 2011 Appendix WC - Supplementary Manual WSA 03. Page 11 of 11

Metering Arrangement No.3 for dual supply For domestic supply: M-16 or 17 meter assembly. For fire supply: M-17 or 19 SDCV assembly with bypass meter.

Technical Solution Sheet 5.03 5: Cold Water Plumbing

Technical Solution Sheet 5.03 5: Cold Water Plumbing 5: Cold Water Plumbing Drawings of Typical Water and Fire Services, Pipe Materials and Private Service AIM The aim of this technical solution is to inform practitioners on the typical requirements for