FRX300basic FRX300 MILLING MACHINE FOR THE CREATION OF GOLDSMITHS MODELS. CNC Milling machine complete with:
|
|
- Isaac Emery Douglas
- 7 years ago
- Views:
Transcription
1
2 FRX300basic CNC Milling machine complete with: * Electrospindle with tool change of rdp Pressurized, with pneumatic tool cone change and ceramic bearings. Grippers ma. 6 mm. *Group of n.2 adjustable static clamps Pneumatic clamps for machining plates with ma. length of 250 mm with variable centre-to-centre distances complete with opening-closing valves and a plan depressurized(milling on one side only) * Liquid cooling with separate cryogenic unit, controlled by the CNC * Tool Change: Automatic with 6 tool positions + 1 for feeler * Tool Lubrication: Micro-atomization system * Tangential diamond milling * CNC numerical control * PC * CAM CAM Rhino NC Software for 2.5 D flat machining and with fan (Rhinoceros license not included from. vers.4.0) Power 220/230V 50/60Hz single phase (required minimum 6 bar air compressor with dryer) Tools are ecluded
3 FRX300professional CNC Milling machine complete with: * Electrospindle with tool change of rdp Pressurized, with pneumatic tool cone change and ceramic bearings. Grippers ma. 6 mm *Mechanical and electrical pre arrangement for continuous feeding plate * Liquid cooling with separate cryogenic unit, controlled by the CNC * Tool Change: Automatic with 6 tool positions + 1 for feeler * Tool Lubrication: Micro-atomization system * Tangential diamond milling * CNC numerical control * PC * CAM CAM Rhino NC Software for 2.5 D flat machining and with fan (Rhinoceros license not included from. vers.4.0) Power 220/230V 50/60Hz single phase (required minimum 6 bar air compressor with dryer) Tools are ecluded
4 FRX300master CNC Milling machine complete with: * Electrospindle with tool change of rdp Pressurized, with pneumatic tool cone change and ceramic bearings. Grippers ma. 6 mm *Mechanical and electrical pre arrangement for continuous feeding plate *Electrical pre arrangment for subsequent fitting 4-5th ais for FRX300 * Liquid cooling with separate cryogenic unit, controlled by the CNC * Tool Change: Automatic with 6 tool positions + 1 for feeler * Tool Lubrication: Micro-atomization system * Tangential diamond milling * CNC numerical control * PC * CAM CAM Rhino NC Software for 2.5 D flat machining and with fan (Rhinoceros license not included from. vers.4.0) Power 220/230V 50/60Hz single phase (required minimum 6 bar air compressor with dryer) Tools are ecluded
5 FRX300 MILLING FRESATRICE MACHINE PER LA FOR CREAZIONE THE CREATION DI MODELLI OF GOLDSMITHS PER OREFICERIA MODELS MACHINE EQUIPMENTS: FRX300 basic FRX300 professional L PC with operative system and key-board for FRX 300 OPTIONALS: D Software for FRX300 CAD-CAM program license for importing files from major commercial Software programs. (Rhinoceros license not included) L Mandrino motorizzato 4 e 5 asse per FRX Software CAM Rhino NC per 5 assi (Licenza di Rhinoceros esclusa) TOOLS: L Set suggested tools for first installation FRX L ISO10 Cutter cone kit complete with elastic pincer & joint (diameter 3 or 6 mm to be specified) L L Carbide-tipped flat milling cutter, diam. from 0.4 to 1.2 mm (specify the desired diameter). Carbide-tipped radius cutter, diam. from 0.4 to 1.2 mm (specify the desired diameter). FRX300 master L Fan, diam. 50 mm, diamond insert (specify the desired angle) L HYDRO tool with diamond insert (specify the desired angle and diameter). OPTIONAL EQUIPMENT (to be ordered together with the machine one choice): L Group of n. 2 adjustable static clamps Pneumatic clamps for machining plates with ma. length of 250 mm with variable centre-to-centre distances complete with opening-closing valves and a depressurized plan (milling on one side only) L L Continuous feeding plate with tension system and suction plate for FRX300. For plates with ma. width 80 mm. (milling on one side only). Continuous feeding plate with tension system, turnebole device and suction plate for FRX300, for plates with ma. width 80 mm. (milling on both sides of the plate) TRAINING Course on the use of FRX300 + Software CAM Rhino NC 2,5D plan processing and with fan (minimum of 5 days recommended). Travel epenses, room and board engineer not included. Course on the use of FRX300 + Software CAM Rhino NC 2,5D plan processing and with fan and Software CAM Rhino NC 4 and 5 ais (minimum of 10 days recommended). Travel epenses, room and board engineer not included.
6 DATI TECNICI TECHNICAL DATA FRX300 Area di lavoro - asse X X aes working area 300 mm Area di lavoro asse Y Y aes working area 350 mm Area di lavoro asse Z Z aes working area 200 mm Velocità asse X Y Z X- Y -Z ais speed 17000mm/min Precisione asse X Y Z X- Y -Z ais precision +/- 0,01 mm Risoluzione asse X Y Z X- Y -Z ais resolution 2 micron Cambio utensile Changing tool automatic Dimensions Dimensioni 850* mm Net weight Peso netto 600 Kg * consolle esclusa/ecluded
7 FEEDING PLATE
8 4 and 5 ROTATING AXIS FAN PRE-ARRANGMENT FOR CONTINUOUS FEEDING PLATE
9 GROUP OF N. 2 ADJUSTABLE CLAMPS
10 APPLICATIONS
11 sisma spa schio Italy
The Boxford range of 3-axis CNC Machining Centres are
The Boxford range of 3-axis CNC Machining Centres are requirements. Featuring a high-end machine controller, utilising the latest motion control technology, they can satisfy all your 2½ and 3D milling
More informationTRIMMING UNIT/DIAMOND MACHINE TST.13
TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.
More informationPoint K2. D ouble D ynamic T ransport. Vitap.com
Point K2 D ouble D ynamic T ransport 1 Vitap.com X Jobs Catalogue Optimize panel cutting A compact CNC machine that can achieve the following functions: Drill holes in 5 directions & perform grooving operations
More informationA cut above the rest. sprintcut. CNC Wirecut EDM
ZAXS I sprintcut Z AXIS sprintcut 4 axes CNC Precision LM guideways for all axes Max. cutting speed : 2 16 mm / min. (With Ø.25 special soft brass wire on 5 mm thick HCHCr (steel) workpiece) 2 14 mm /
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationThat s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance
[ That s ] E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250 Training reality with industrial performance Concept TURN 250 Uncompromising quality right down to the last bolt, at an unbeatable
More informationAdvantages and application of PCD and CBn tools
PCD and CBN tools Advantages and application of PCD and CBn tools Powerful and economical Tools with PCD and CBN cutting edges are the ideal solution for difficult-to machine, highly abrasive materials.
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationElectron S.R.L. B55 CNC TRAINING MACHINES
Electron S.R.L. Design Production & Trading of Educational Equipment B55 CNC TRAINING MACHINES Specifications may change without notice Page 1 of 12 File B55 MODULAR TRAINING SYSTEM FOR THE STUDY OF CNC
More informationProduct information. QM eco select Disc erosion machine for the machining of PCD tools
Product information QM eco select Disc erosion machine for the machining of PCD tools QM eco select The Idea. High-precision machining of PCD tools. The VOLLMER QM eco select is for the machining of tools
More informationDRILLFLEX CNC HORIZONTAL MACHINING CENTER
DRILLFLEX CNC HORIZONTAL MACHINING CENTER 02 DRILLFLEX CNC HORIZONTAL MACHINING CENTER MUBEA DRILLFLEX - DF 1100 TIME IS MONEY MUBEA SYSTEMS (DIVISION OF THE WORLDWIDE HACO GROUP) has developed a new automatic
More informationDMS 680. Universal length measuring system gauge inspection for»iso 9000«requirements
DMS 680 Universal length measuring system gauge inspection for»iso 9000«requirements Universal length measuring system DMS 680 Wide range of applications For periodic inspection of gauges, reference gauges,
More informationProduct Range. Product Range. Vertical Turning Centres Gantry Milling Machines COMPANY WITH QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV : COMPANY
COMPANY AUTHORISED TO USE THE MARK COMPANY WITH QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV : Product Range Product Range Vertical Turning Centres Gantry Milling Machines ATF-ATT Torni verticali Vertical
More informationQCJ5 precision prototyping system
QCJ5 precision prototyping system QCJ5the intelligent solution - QCJ5 setting the NEW standard for in-house prototyping! 12, 24 or 32-Position Automatic Tool Change Projects run unattended and uninterrupted,
More information:: fast. precise. clean GRAPHITE MACHINING USING HIGH TECHNOLOGY CNC MILLING.
:: fast. precise. clean GRAPHITE MACHINING USING HIGH TECHNOLOGY CNC MILLING. made in Germany Welcome to the world of imes-icore. Productivity and economy redefined! Customers continually de- THE FREE
More informationLava. CNC 500 Milling Machine. Redefine. Productivity
Lava CNC 500 Milling Machine Redefine Productivity 2 3 4 1 5 6 1 2 3 3-axis speed and precision. 5-axis milling when you need it. A workpiece magazine that s not a lot of work. A worktool magazine with
More informationPLASMA CUTTING MACHINES PL SERIES
PLASMA CUTTING MACHINES PL SERIES PLASMA CUTTING MACHINES Plasma machines offers the best mixed gases quality, efficiency, lower cutting cost and wide range for cutting of mild steel, stainless steel and
More informationSCHEDA TECNICA ESSICCATOI 55/75 55/75 TUMBLE DRYER TECHNICAL DATA SHEET
SCHEDA TECNICA ESSICCATOI 55/75 55/75 TUMBLE DRYER TECHNICAL DATA SHEET MODELLO MODEL CAPACITA 1/20 e 1/25 CAPACITY 1/20 and 1/25 INVERSIONE REVERSE ACTION DIAMETRO CESTO DRUM DIAMETER PROFONDITA CESTO
More informationall digital all options The right milling option High precision and productivity
all digital all options The innovative FULL CONTOUR milling system ZIRCONIA The right milling option High precision and productivity Customized digital solutions for every laboratory Preparation Scanners
More informationAtling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests
Atling proudly presents the next generation self centering steady rests ATLING Ockelbo Sweden AX Steady Rests 1 The New AX Steady Rest The Atling AX series is the result of several years of development
More informationARTI Bileme GRINDING& WELDING MACHINERY
5 AXES DOUBLE WHEEL COMPLETE TOP AND FACE GRINDER IN ONE CYCLE is a fast, PC controlled, built in one central construction top and face grinder in one clamping. guarantees a smooth top and face grinding
More informationThe Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
More informationFVA THIRD-GENERATION VERTICAL SATURATED-STEAM STERILIZERS
The key difference between a small vertical or bench-top sterilizer and industrial sterilizer is performance. Small saturated-steam sterilizers with vertical or horizontal chambers were devised many years
More informationTool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö
Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014 0214/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due
More informationPBZ Heavy. PBZ Heavy. CNC Gantry-Type Machining Center. Power - Performance - Precision. www.knuth-usa.com
CNC Gantry-Type Machining Center Power - Performance - Precision Travel X-axis up to 244 in Y-axis up to 126 in Z-axis up to 39 in Strong Machine bed, dual columns and fixed bridge ensure a rigid frame
More informationRotary screw compressors kw 5,5 7,5 11 15 18,5 22 30 bar 8 10 13 15 MODULO
Rotary screw compressors kw 5,5 7,5 11 15 18,5 22 30 bar 8 10 13 15 MODULO The sum of technology TriAB Air ends The BALMA screw compressors are fitted with the unique TriAB air ends that are designed and
More informationaccord 20 fx CNC machining centre
accord 20 fx CNC machining centre accord 20 fx CNC machining centre New-generation modular machining centre designed for machining operations involving heavy duty stock removal with high precision and
More informationPrecise heavy-duty cutting
PR 130 / PR 150 / PR 160 / PR 180 / PR 200 / PR 260 Precise heavy-duty cutting P-SERIES K-SERIES T-SERIES MILLFORCE 02 / Fields of application 03 / Machine concept 04 / Machine technology 05 / Options
More informationŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the
More informationSprutCAM is a CAM system for NC program generation for machining using multi-axis milling, turning, turn/mill, Wire EDM numerically controlled
SprutCAM is a CAM system for NC program generation for machining using multi-axis milling, turning, turn/mill, Wire EDM numerically controlled machines and machining centers. The system enables the creation
More informationHOBBING MACHINE TYPE ZFWZ 8000x40
Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth
More informationCNC Portal Milling Machine FZ 50. CNC Power Milling Technology
CNC Portal Milling Machine FZ 5 CNC Power Milling Technology FZ 5 Portal Milling Machine for Heavy Cutting The newly developed portal milling machine FZ 5 is based on a flexible machine design which can
More informationCNC MILLING TECHNOLOGY FOR THE JEWELER- AND GOLDSMITH HANDCRAFT:
:: precise. individual. economic. CNC MILLING TECHNOLOGY FOR THE JEWELER- AND GOLDSMITH HANDCRAFT: made in Germany Welcome to the world of imes-icore. Productivity and economy redefined! imes-icore is
More informationBED TYPE MILLING CENTRE
TR BED TYPE MILLING CENTRE TR BED TYPE MILLING CENTRE BED TYPE MILLING CENTRE HIGH PERFORMANCE IN A COMPACT MACHINE PROVIDING ACCURATE COMPLEX MILLING TR BED TYPE MILLING CENTRE The TR milling centre is
More informationH I G H S P I N W A S H E R E X T R A C T O R S H C 6 0 H C 6 5 H C 7 5 H C 1 0 0 H C 1 3 5 H C 1 6 5
H I G H S P I N W A S H E R E X T R A C T O R S H C 6 0 H C 6 5 H C 7 5 H C 1 0 0 H C 1 3 5 H C 1 6 5 HC 60 - HC 65 - HC 75 - HC 100 - HC 135 - HC 165 New look Matt door: uniform look of the front Ergonomic
More informationO-I DUBI PLANT FANS Quotation Spec Data & Specifications
TECHNICAL DATA O-I DUBI PLANT FANS Quotation Spec Data & Specifications 1 page for the global informations + 12 pages for the fans data Revision 2 end april Global informations: These fans are a replacement
More informationQuick Reference Catalog
Gearboxes Turrets Y-Axis Rotary Tools Tool Discs B-Axis Quick Reference Catalog WWW.BARUFFALDI.IT TB Servo Turret SERVO MOTOR TURRETS TB-type turrets rotate thanks to a BRUSHLESS SERVO MOTOR controlled
More informationSPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.
SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION
More informationOPTICAL MEASURING MACHINES
OPTICAL MEASURIN MACHINES SYLVAC SCAN Dedicated to the fast and contactless measuring of cylindrical parts, our new SCAN machines are based on the principle of the scanner. This technique allows to reproduce
More informationTOOL PRESETTERS. 20 Thompson Road, East Windsor, CT 06088 1-800-249-5662 860-623-4132 Fax www.komaprecision.com info@komaprecision.
2013 TOOL PRESETTERS 20 Thompson Road, East Windsor, CT 06088 1-800-249-5662 860-623-4132 Fax www.komaprecision.com info@komaprecision.com ELBO CONTROLLI TOOL PRESETTERS Tool Presetters Elbo Controlli
More informationS40. The Allrounder for complex grinding jobs.
S40 The Allrounder for complex grinding jobs. Advantages S40 Dimensions Distance between centres 1000/1600 mm (39.4 /63 ) Height of centres 175/225 mm (6.9 /8.9 ) Maximum workpiece weight 130/150 kg (286/330
More informationINSTRUCTION. Industrial Sewing Machines. No. 010012. First published : June 1997 Second edition : March 2001
INSTRUCTION Industrial Sewing Machines First published : June 1997 Second edition : March 2001 No. 010012 INTRODUCTION Thank you for your purchasing Kansai Special's DLR Series. Read and study this instruction
More informationTool dynamometers 2 and 3 component tool dynamometers for measurement of cutting forces in drilling, turning and milling processes
Tool dynamometers 2 and 3 component tool dynamometers for measurement of cutting forces in drilling, turning and milling processes Neu: Multimedia product presentation Tool dynamometer drilling : "BKM2000"
More informationKey data. The practical machines for your specific grinding solution. A member of the United Grinding Group. The Art of Grinding.
The Art of Grinding. A member of the United Grinding Group CT450 / CT550 The practical machines for your specific grinding solution. Key data The CT450 / CT550 are very flexible internal cylindrical grinding
More informationWeeke CNC Machining Center, Model BP-150 Optimat
Weeke CNC Machining Center, Model BP-150 Optimat Weeke's BP-150 is a truly industrial machine designed primarily for point-topoint boring and machining of flat components without special workpiece fixtures.
More informationHCW 1000 NEW TYPE OF LIGHT MACHINE FROM SKODA
HCW 1000 NEW TYPE OF LIGHT MACHINE FROM SKODA INTRODUCTION HCW 1000 ŠKODA MACHINE TOOL a.s. continues its more than 100 years old tradition of high-precision machine tool manufacturing. Based on market
More informationDUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400
More informationSOLENOID VALVES AND PNEUMATIC VALVES
2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the
More informationME 1355 CAD/CAM LABORATORY CNC MILLING PROGRAM. Study of G Codes and M Codes to Write Manual Part Programming for Fanuc Control Systems
ME 1355 CAD/CAM LABORATORY CNC MILLING PROGRAM Ex.No.1 Study of G Codes and M Codes to Write Manual Part Programming for Fanuc Control Systems PREPARATORY FUNCTION ( G CODES ) The preparatory functions
More informationBelt and Roller Conveyor for boxes and containers
logiss srl 38068 Rovereto (TN) Italy Viale del Lavoro, 16/E (ZI) Tel. +39 0464 401121 Fax. +39 0464 423077 Mail technical@logiss.eu Web Belt and Roller Conveyor for boxes and containers A wide range of
More informationNewland Machine Tool Group Inc.
Newland Machine Tool Group Inc. HEAVY MACHINE TOOLS OVERVIEW Horizontal Boring Mills KB Series T-type HBM with 130 or 165 mm extendable spindle (W-axis), column movable in the spindle direction (Z-axis),
More informationINSULATION SYSTEMS FOR CODUCTORS
INSULATION SYSTEMS FOR CODUCTORS For wire, flat wire and rope Vat no.: 01251430193 Fiscal code: DGH CMN54D11A570F Page. 1 Mechanical factory Mechanical constructions Installation of plants Services for
More informationMachining Center Equipped with Unparalleled Rigidity and Agility NHX6300
Press Release Mori Seiki Co., Ltd. Head Office: 2-35-16 Meieki, Nakamura-ku, Nagoya City 450-0002, Japan TEL: +81(0)52-587-1830 FAX: +81(0)52-587-1833 January 24, 2013 Machining Center Equipped with Unparalleled
More informationVia Stelvio, 355-21050 Marnate (VA), Italy Tel. +39.0331.600881 - Fax +39.0331.389144 E-mail: info@italcontrol.net - Website: www.italcontrol.
[ Tauruslab.net ] Italcontrol srl Via Stelvio, 355-21050 Marnate (VA), Italy Tel. +39.0331.881 - Fax +39.0331.389144 E-mail: info@italcontrol.net - Website: www.italcontrol.net ...your gate to the world
More informationINDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK
INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single
More informationLINEAR MOTION CONTROL
LINEAR MOTION CONTROL Technical Data Sheet Static Locks RLSS Series Nexen s new generation of linear holding/locking devices take rod locking technology to the next level. With superior performance, these
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationCNC MILLING MACHINE TROUBLE SHOOTING. 1. Trouble Shooting. No Trouble Solution. 1.Check the air pressure
CNC MILLING MACHINE TROUBLE SHOOTING 1. Trouble Shooting No Trouble Solution 1 Tool magazine( (Umbrella type) Noise for tool changing Can t change the tool Tool number in chaos Tool magazine keep rotation
More informationTruBend: More. bending. freedom. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology
TruBend: More bending freedom Machine Tools / Power Tools Laser Technology / Electronics Medical Technology Precise bending. More flexible than ever before. The TRUMPF Group is one of the world s leading
More informationTeachware CNC Technology
Teachware CNC Technology Contents CNC Basics CNC Turning CNC Milling CAD/CAM Turning & Milling CNC Basics - Excerpt MTS TeachWare Student s Book - MTS GmbH 1999 MTS Mathematisch Technische Software-Entwicklung
More informationCNC Milling Engraving machine G4030A Instruction manual
CNC Milling Engraving machine G4030A Instruction manual 1. Safety notes Every machine controlled by computer (PC) can be really dangerous for human life and health. Comply with bolow rules and use Your
More informationCNC 8055 / CNC 8055i SELF-TEACHING MANUAL ( TC OPTION) (REF 0607) (Ref 0607)
CNC 8055 / CNC 8055i (REF 0607) SELF-TEACHING MANUAL ( TC OPTION) (Ref 0607) All rights reserved. No part of this documentation may be copied, transcribed, stored in a data backup system or translated
More informationMilling and Machining Center Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
More informationX.mill 1100 L. X.mill 1100 L. CNC Machining Center. Control GPlus 450 with touch-screen technology or Siemens Sinumerik 828 D
CNC Machining Center Control GPlus 450 with touch-screen technology or Siemens Sinumerik 828 D description specifications GPlus 450 siemens 828 D www. k n u t h.d e Travel distances X axis 1100 mm Y axis
More informationDUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
More informationMandrel system MIS. www.microcentric.de
Mandrel system MIS MicroCentric GmbH Berblingerstr. 16 71254 itzingen / Germany Tel.: +49 (0) 7156 17819-0 Fax: +49 (0) 7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this catalog:
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationAtlas Copco Stationary air compressors
Atlas Copco Stationary air compressors Oil-free and oil lubricated piston compressor 2.2 - kw / 3-7.5 hp QUALITY COMPRESSORS DESIGNED SPECIFICALLY FOR THE SNOW MAKING INDUSTRY Atlas Copco's L-range of
More informationIBARMIA TECHNICAL SOLUTIONS JOURNAL // ibarmia.com //#03 OCT 2014 ZVH 58/L6000 MULTIPROCESS: PROBABLY, THE MOST FLEXIBLE MACHINE IN THE MARKET
IBARMIA TECHNICAL SOLUTIONS JOURNAL // ibarmia.com //#0 OCT 04 ZVH 58/L6000 MULTIPROCESS: PROBABLY, THE MOST FLEXIBLE MACHINE IN THE MARKET HTL 5 kw, 500 rpm 800 Nm 000 kg High production system Fixed
More informationHow To Use A Balancing Arm
Accessories for ergonomic workplaces Reliability Productivity Ergonomics Ecology Be demanding Don t be satisfied with the maximum Perfection is in your hands Naturally innovative Fiam accessories. A valuable
More informationMechanics and Dynamics of 5-axis Ball-end Milling Operations
Mechanics and Dynamics of 5-axis Ball-end Milling Operations Erdem OZTURK, PhD.Candidate L.Taner TUNC, PhD. Candidate Assoc.Prof. Erhan BUDAK Manufacturing Research Laboratory, SABANCI UNIVERSITY, ISTANBUL
More informationLava. Precision Solutions. Site Planning and Installation Guide
Lava Precision Solutions Site Planning and Installation Guide TABLE OF CONTENTS Table of Contents Introduction...........................................................................................
More informationROUNDO 3-Roll Plate Bending Machines Type PS
ROUNDO 3-Roll Plate Bending Machines Type PS Universal Machine used for all Plate Bending Double Pinch Design 1. Align the plate using the alignment grooves in the lower rolls or against the rear roll.
More informationSHARP SVL 4525 LINEAR WAY VERTICAL MACHINING CENTER
SHRP SVL 4525 LINER WY VERTICL MCHINING CENTER PRECISION MCHINE TOOLS Sharp Industries, Inc. 3501 Challenger Street Torrance, C 90503 Tel 310-370-5990 Fax 310-542-6162 Email: info@sharp-industries.com
More informationPrecision components from start to finish. Excellence. in performance-critical machining & fabrications
Precision components from start to finish Excellence in performance-critical machining & fabrications Leading precision machining technology... Fully integrated solutions Facilities and capabilities The
More informationTechnical News Bulletin
Technical News Bulletin January 2003 Two-way air operated Funnel Mechanism 200-2100 Up-Stroke Cushion Control Valve Top-mounted Check Valve Increased Stroke Rigid Cam Cam Roller Fixation Page 1/5 1. Description
More information367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube.
PUMPMASTER 2 accessories, other MOBILE oil dispensers PumpMaster 2 Accessories 01 OIL PUMPS 360 1 360 120 367 000 367 011 369 910 360 1 Wall bracket 360 120 Floor bracket 360 001 Bung adaptors 2" (M) connection
More informationOWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80
OWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80 Read the Operator s Manual entirely. When you see this symbol, be aware that the subsequent instructions and warnings are serious - follow without
More informationSELECTING THE ELECTRIC VIBRATOR
SELECTING THE ELECTRIC VIBRATOR Vibration systems and methods The systems that use the vibration technique can be divided into the following categories: freely oscillating systems, which will be described
More informationDUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy
More information1x90 TONS TENSIONERS TECHNICAL PROPOSAL. 1 X 90 Tons 30 m/min Tensioners TECHNICAL PROPOSAL JOB 08/059. 0 19/02/2008 Basic proposal PP GM SB
Pagina N.: 1 of 19 1 X 90 Tons 30 m/min Tensioners JOB 08/059 0 19/02/2008 Basic proposal PP GM SB Rev N Date Issue Description Prepared by Checked by Approved by Pagina N.: 2 of 19 TABLE OF CONTENTS:
More information8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles
8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles A. Schubert 1, O. Harpaz 2, B. Books 2, U. Eckert 1, R. Wertheim 1 1 Fraunhofer IWU, Reichenhainer Str. 88,
More informationA Fuzzy System Approach of Feed Rate Determination for CNC Milling
A Fuzzy System Approach of Determination for CNC Milling Zhibin Miao Department of Mechanical and Electrical Engineering Heilongjiang Institute of Technology Harbin, China e-mail:miaozhibin99@yahoo.com.cn
More informationILLUSTRATED PARTS LIST XTREME ICE MAKER (1230 SERIES) MODEL NO.
XTREME ICE MAKER (0 SERIES) MODEL NO. 00 00 00 00 00 00 0 XTREME ICE MAKER (0 SERIES) FIGURE. GENERAL ASSEMBLY (AIR CONDENSER SHOWN) 00 Screw TC - HXWS 00000 Screw TC - HXWS 0 (Marine) 0000 Grommet Nut
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationPneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US
Pneumatic Grippers Parallel and Angular Grippers Catalog 19-2/US Catalog 19-2/US OContents GPR Series Rotary vane driven design GPR GPCR Series P5G-HPM(C) Series P5G-HP Series GPT Series P5G-AP Series
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationPARTS BOOK. hohner 48/5S. Stitcher Head. Vol.2 UB706016-01. 110407/hohner48/5S/01/KS
PARTS BOOK hohner /5S Stitcher Head 007/hohner/5S/0/KS Vol. UB70606-0 Hohner /5 Revision Control List Page / Correction (a: Parts No. c: Description d: S/N e: Remarks f: Other g: Registration h: Illustration
More informationETC -SV. Class 0 oil-free compressed air through catalysis
Innovation QUALITy Reliability Worldwide ETC -SV Class 0 oil-free compressed air through catalysis The way to oil-free compressed air The ETC operating principle Through the process of catalytic oxidation,
More informationTIG torches... 3-2 to 3-5 Tungsten electrodes... 3-6 to 3-7 TIG consumables... 3-8 Miscellaneous... 3-9
3- welding torches........................................................... 3-2 to 3-5 Tungsten electrodes........................................ 3-6 to 3-7 consumables........................................................
More informationRollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
More informationDMU 75 / 95 monoblock
www.dmgmori.com Five-axis universal milling machines DMU 75 / 95 monoblock High tech as standard Five-axis simultaneous machining at the best price. DMU 75 / 95 monoblock Top features for five-axis simultaneous
More informationFOR SALE: RECYCLING PLANT FOR. - Aluminum scrap - Light metals - WEEE - Mixed industrial waste BANO PREMAC 28-90 HYDRO. Single shaft shredder
FOR SALE: RECYCLING PLANT FOR - Aluminum scrap - Light metals - WEEE - Mixed industrial waste BANO PREMAC 28-90 HYDRO Single shaft shredder Stationary, weight 40 ton Table of content Sale of BANO PREMAC
More informationECOCIAT. Domestic hot water heat recovery unit
Heat recovery unit Domestic hot water High energy efficiency with R410A Compact and quiet Scroll compressors Brazed-plate heat exchangers Heating Heat recovery ENVIRONMENTALLY HFC R410A PROTECTION DE FRIENDLY
More information* Provided that the overall length is within the minimum length parameter of the Gen II blank that is machined.
PLEASE SEE GEN II CUSTOM VALVE SPECIFICATIONS PAGES 42 & 43 CUSTOMER NAME CUSTOMER SIGNATURE DATE By signing this form I accept the goods are nonreturnable for credit and that Manley takes no responsibility
More informationPump Skid Fabrication for Magnetic Coupling. Rick Soltis Chief Mechanic City of Bedford
Pump Skid Fabrication for Magnetic Coupling Rick Soltis Chief Mechanic City of Bedford Contents Magnetic Couplings What They Are, How They Work, Where They re Used Fabrication and Manufacturing of Pump
More informationhttp://www.i-max.top
http://www.i-max.top Intelligent NC. Simple to operate, like a press. Requires no special skill Secure clamping of complex shapes Multi-task machining without reclamping Program supply system for quick
More informationCAMaster Options for the Stinger Line of CNC Machines
CAMaster Options for the Stinger Line of CNC Machines Recoil Indexing Lathe (All Stingers) The Indexing Lathe is mounted on the side of the machine so it does not interfere with the table top when it is
More informationMIKRON HPM 1150U HPM 1350U
MIKRON HPM 1150U HPM 1350U High performance milling versus high speed milling - the one cannot replace the other! While with high speed milling the objective is to create as much surface on the workpiece
More information