SENTRON Switching and Protection Devices Molded Case Circuit Breakers

Transcription

1 Siemens AG 2008 SENTRON Switching and Protection Devices Molded Case Circuit Breakers /2 Introduction up to 00 A /6 General data /8 3-pole /22 4-pole /38 Options /40 Accessories/spare parts 3VF2 Molded Case Circuit Breakers 3VF2 Molded Case Circuit Breakers up to 100 A /75 3-pole, fixed-mounted versions /75 4-pole, fixed-mounted versions /76 Accessories/spare parts Siemens LV

2 * ) Siemens AG 2008 SENTRON Switching and Protection Devices Molded Case Circuit Breakers Introduction Overview Type VL0X/3VL1 VL0/3VL2 VL250/3VL3 VL400/3VL4 Molded case circuit breakers 3VL molded case circuit breakers up to 00 A Rated current I n A to 0 26 to 0 80 to to 400 at 50 C ambient temperature 1) Number of poles Rated operational voltage U e AC 50/60 Hz DC 2) Electronic trip units Thermal-magnetic Electronic ETU LCD Replaceable PROFIBUS module COM10 Dimensions, # ' A B C D V V mm mm mm mm Switching capacity I cu /I cs RMS value according to IEC Standard switching capacity N 3) up to 240 V AC up to 415 V AC up to 440 V AC up to 500/525 V AC up to 690 V AC up to 250 V DC 5) up to 500 V DC 5) up to 600 V DC 5) NEMA breaking capacity 6) up to 480 V AC up to 600 V AC High switching capacity H 3) up to 240 V AC up to 415 V AC up to 440 V AC up to 500/525 V AC up to 690 V AC up to 250 V DC 5) up to 500 V DC 5) up to 600 V DC 5) NEMA breaking capacity 6) up to 480 V AC up to 600 V AC Very high switching capacity L 3) up to 240 V AC up to 415 V AC up to 440 V AC up to 500/525 V AC up to 690 V AC up to 250 V DC 5) up to 500 V DC 5) up to 600 V DC 5) NEMA breaking capacity 6) up to 480 V AC up to 600 V AC Available Not available Standard switching capacity N High switching capacity H Very high switching capacity L 65/65 40/40 25/20 18/14 8/4 4) 30/30 65/65 40/40 25/20 25/20 12/6 32/ ) /75 70/70 42/32 30/23 12/6 4) 30/30 30/30 100/75 70/70 50/38 40/30 12/6 32/32 32/ ) / /75 75/50 50/38 12/6 32/32 32/32 32/ /65 40/40 25/20 25/20 12/6 32/ /75 70/70 50/38 40/30 12/6 32/32 32/ / /75 75/50 50/38 12/6 32/32 32/32 32/ /65 45/45 35/26 25/20 15/8 32/32 For 3VL molded case circuit breakers according to UL 489 see Catalog LV. 1) 3VF2 at 40 C ambient temperature /75 70/70 50/38 40/30 15/8 32/32 32/ / /75 75/50 50/38 15/8 32/32 32/32 32/ ) Rated DC voltage applies only for circuit breakers with thermal-magnetic trip unit. /2 Siemens LV

3 Siemens AG 2008 SENTRON Switching and Protection Devices Molded Case Circuit Breakers Introduction VL630/3VL5 VL800/3VL6 VL1250/3VL7 VL00/3VL8 3VF2 3VL molded case circuit breakers up to 00 A 252 to to to to 00 to and 4 3VF2 molded case circuit breakers up to 100 A up to / /65 45/45 35/26 25/20 20/10 32/32 65/65 50/50 35/26 25/20 20/10 65/35 50/25 35/26 25/20 20/10 65/35 50/25 35/26 25/20 20/10 65/33 18/ /75 70/70 50/38 40/30 30/15 32/32 32/32 100/75 70/70 50/38 40/30 30/15 100/50 70/35 50/38 40/30 30/15 100/50 70/35 50/38 40/30 30/ / /75 75/50 50/38 35/17 32/32 32/32 32/32 200/ /75 75/50 50/38 35/17 200/ /50 75/50 50/38 35/17 200/ /50 75/50 50/38 35/ ) 4) At 240 V AC, 415 V AC and 525 V AC max. 5 % overvoltage, at 440 V AC, 500 V AC and 690 V AC max. 10 % overvoltage, at 240 V DC, 500 V DC and 600 V DC max. 5 % overvoltage. Rated current I n 25 A ) The maximum permitted DC voltage for each conducting path needs to be taken into account for DC switching applications, see Technical Information LV 1T, "Configuring", "Switching of DC Currents"; time constant t = 15 ms. 6) The NEMA breaking capacity can be found on the rating plate of each IEC circuit breaker. Siemens LV /3

4 Siemens AG 2008 SENTRON Switching and Protection Devices Molded Case Circuit Breakers Introduction NSE0_01888 $ Withdrawable/plug-in bases (pages /49 to /54) % Side walls for withdrawable version (pages /49 to /54) & Phase barriers (pages /56 to /61) ( Flared front busbar connecting bars (pages /56 to /61) ) Straight connecting bars (pages /56 to /61) * Multiple feed-in terminals for Al/Cu (pages /58 to /61) + Box terminals for Cu (pages /56 to /61), Extended terminal covers (pages /56 to /61) - Standard terminal covers (pages /56 to /61). Masking frames/cover frames for door cut-out (pages /70 to /73) / Motorized operating mechanisms with spring energy store (pages /46 to /47) 0 Front-operated rotary operating mechanisms (pages /43 to /48) 1 Door-coupling rotary operating mechanisms (pages /43 to /48) 2 SENTRON 3VL circuit breakers (pages /8 to /39) 3 Internal accessories (pages /38, /40 to /41) 4 Solid-state overcurrent trip units (pages /10 to /17, /21, /28 to /33, /37) 5 Thermal/magnetic overcurrent trip units (pages /8 to /13, /20, /22 to /29, /36) 6 RCD modules (page /55) 7 Rear terminals flat and round (pages /56 to /61) 8 COM10 communications modules to the PROFIBUS DP (page /74) 9 Function testers for electronic trip units (pages /62 to /67) /4 Siemens LV

5 Siemens AG 2008 SENTRON Switching and Protection Devices Molded Case Circuit Breakers Introduction NSE0_ Siemens LV /5

6 up to 00 A General data Siemens AG 2008 Benefits The compact design of the SENTRON 3VL circuit breakers coupled with excellent characteristics fulfills the high demands of today's electrical distribution systems. These circuit breakers offer a broad product range, improved technology, space savings and easy operation. They are available both in thermal-magnetic ( A to 630 A) and in electronic versions (63 A to 00 A). Communication The use of modern communication-capable circuit breakers opens up completely new possibilities in terms of start-up, parameterization, diagnostics, maintenance and operation. This allows many different ways of reducing costs and improving productivity in industrial plants, buildings and infrastructure projects to be achieved: Fast and reliable parameterization Timely information and response can prevent plant stoppages Effective diagnostics management Measured values are the basis for efficient load management, for drawing up power demand profiles and for assigning power to cost centers. Application The different versions of SENTRON 3VL circuit breakers are suitable for the following applications: Incoming and outgoing circuit breakers in distribution systems Switching and protection devices for motors, transformers and capacitors Disconnector units with features for stopping and switching off in an emergency (main control switches and EMERGENCY-STOP switches) in conjunction with lockable rotary operating mechanisms and terminal covers. The SENTRON 3VL circuit breakers are available in the following versions: 1. For system protection (in 3- and 4-pole versions) The overload and short-circuit releases are designed for the protection of cables, leads and non-motor loads. 2. For motor protection (in 3-pole version) The overload and short-circuit releases are designed for optimized protection and direct starting of induction squirrel-cage motors. The circuit breakers for motor protection are susceptible to phase failure and feature an adjustable trip class. The electronic trip units operate with a microprocessor. 3. For starter combinations (in 3-pole version) These circuit breakers are used both for short-circuit protection as well as for isolating functions, which may be required in starter combinations consisting of circuit breakers, overload relays and motor contactors. These circuit breakers exclusively feature adjustable, instantaneous short-circuit releases. 4. As non-automatic air circuit breakers (in 3- and 4-pole versions) These circuit breakers can be used as feeder circuit breakers, main control switches or non-automatic circuit breakers without overload protection. They incorporate an integrated short-circuit self-protection system, eliminating the need for back-up fuses. Switching capacity The circuit breakers with standard switching capacity N (I cu up to 40/50 at 415 V) are indicated in the selection and ordering data by green bacrounds. The circuit breakers with high switching capacity H (I cu up to 70 at 415 V) are indicated in the selection and ordering data by blue bacrounds. The circuit breakers with very high switching capacity L (I cu up to 100 at 415 V) are indicated in the selection and ordering data by orange bacrounds. Standards and specifications SENTRON 3VL circuit breakers comply with: IEC , EN , DIN VDE 0660, Part 100, IEC , EN , DIN VDE 0660, Part 101. Isolating features according to IEC , EN Disconnecting features (main control switches) according to EN and DIN VDE The SENTRON 3VL circuit breakers comply in addition with requirements for "disconnector units with features for stopping and switching off in an emergency" (EMERGENCY-STOP switches) in conjunction with lockable rotary operating mechanisms (red-yellow) and terminal covers. Please contact Siemens for details of other standards. The electronic trip units of the circuit breakers for motor protection also comply with IEC , DIN VDE 0660, Part 102. VL0X to VL400 circuit breakers can be equipped with a SENTRON 3VL RCD module. They then comply with IEC Appendix B. The SENTRON 3VL RCD module complies with IEC to IEC , IEC and EN 55011, Class B (equivalent to CISPR 11) with regard to electromagnetic compatibility. Operating conditions The SENTRON 3VL circuit breakers are designed for operation in enclosed areas. Suitable enclosures must be provided for operation in areas with severe ambient conditions (such as dust, caustic vapors, hazardous gases). RCD modules The RCD module is designed for retrofitting to the switch. It can also be retrofitted by the customer. The combination of SENTRON 3VL circuit breaker and RCD module can be fed from the top or bottom. All SENTRON 3VL circuit breakers with RCD modules are available with auxiliary switches, alarm switches, undervoltage and shunt trip units. Protection of plant and equipment against overload or damage by ground faults (ground-fault protection). The RCD module trips the circuit breaker through vectorial summation current formation for all phase currents if the vectorial sum of the currents in the poles (= the ground fault current) overshoots the pre-set response and delay time values. AC currents and pulsating DC currents are measured (CBR, design A according to EN ). /6 Siemens LV

7 VL0 to VL00 electronic trip units Overview of functions Siemens AG 2008 up to 00 A General data supplement Trip unit System protection Motor protection Starter protection Generator protection Function Setting options L Overload protection S 1) Short-circuit protection (short-time delayed) I 1) Short-circuit protection (instantaneous) Ground-fault protection I r = I n I sd = I r t sd [s] I i = I n I g = I n DK M I DC TM 2) LI EJ TM 2) LI EC TM 2) LIN EM TM 2) LIN AP ETU10M 3) LI AB ETU10 LI BA ETU10 LIN AC ETU12 LIG BD ETU12 LING AE ETU20 LSI BF ETU20 LSIN AG ETU22 LSIG BH ETU22 LSING AS ETU30M 3) LI /8/11 CP LCD ETU40M 3) LI CH LCD ETU40 LI, LSI CJ LCD ETU40 LI, LSIN CL LCD ETU42 LSIG ) CM LCD ETU42 LSIG ) CN LCD ETU42 LSIG, LSING ) G supplement Trip unit Thermal image Phase failure DK M 3 DC TM 2) 3 EJ TM 2) 4 EC TM 2) 4 60% EM TM 2) 4 100% AP ETU10M 3) 40% I R 3 10 AB ETU BA ETU /100% AC ETU12 $ BD ETU12 % 4 50/100% AE ETU20 3 BF ETU /100% AG ETU22 $ 3 BH ETU22 % 4 50/100% AS ETU30M 3) 40% I R 3 10, 20, 30 CP LCD ETU40M 3) % I R 3 5, 10, 15, 20, 30 CH LCD ETU CJ LCD ETU % OFF CL LCD ETU42 $ CM LCD ETU42 $/& CN LCD ETU42 % % OFF Ground-fault protection $Vectorial summation current formation (3-conductor system) %Vectorial summation current formation (4-conductor system) &Direct detection of ground-fault current in the neutral point of the transformer Communication-capable Ground-fault protection Number of poles N pole protected 1) I 2 t (ON/OFF) Trip class (t C ) Time-lag class (t R ) ) Size dependent. 2) TM up to I n = 630 A. 3) Motor protection up to I n = 500 A. 4) t g s. Thermo-magnetic trip unit Magnetic trip unit Solid-state trip unit LCD display Siemens LV /7

8 up to 00 A 3-pole Selection and ordering data Type Rated current I n Set current of the inverse-time delayed overload trip unit "L" I R Operating current of the instantaneous short-circuit releases "I" I i DT ** I cu up to 40/50 at 415 V, standard switching capacity N See "Overview". supplement required, see page /38 Basic price A A A Fixed-mounted circuit breakers, VL0X to VL630, up to 630 A Thermal-magnetic overcurrent trip units System protection, TM, LI function Siemens AG 2008 With permanently fixed thermal overload releases, permanently set short-circuit releases NSE0_ B 3VL DA unit VL0X/ B 3VL DA unit VL B 3VL DA unit B 3VL DA unit B 3VL DA unit B 3VL DA unit B 3VL DA unit B 3VL DA unit B 3VL DA unit B 3VL DA unit B 3VL17-1DA unit Connection type can be selected by assignment of the 12th position of the > Connection with box terminal 3 Connection with screw terminal 1) 6 System protection, TM, LI function With adjustable thermal overload releases, permanently set short-circuit releases NSE0_00703 VL0X/ B 3VL DD unit VL B 3VL DD unit B 3VL DD unit B 3VL DD unit B 3VL DD unit B 3VL DD unit B 3VL DD unit B 3VL DD unit B 3VL17-1DD unit Connection type can be selected by assignment of the 12th position of the > Connection with box terminal 3 Connection with screw terminal 1) 6 System protection, TM, LI function With adjustable thermal overload releases, adjustable short-circuit releases NSE0_00704 VL0/ B 3VL DC unit VL B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL27-1DC unit VL250/ B 3VL DC unit VL B 3VL DC unit Connection type can be selected by assignment of the 12th position of the > Connection with box terminal 3 Connection with screw terminal 1) 6 VL400/ B 3VL DC unit VL B 3VL DC unit B 3VL DC unit B 3VL DC unit VL630/ B 3VL DC unit VL B 3VL DC unit B 3VL DC unit B 3VL DC unit ** Delivery time class A for supplement "0AA0", see page /38. /8 Siemens LV ) Cannot be used in conjunction with RCD module.

9 Siemens AG 2008 up to 00 A 3-pole DT ** I cu up to 70 at 415 V, high switching capacity H supplement required, see page /38 Basic price DT ** I cu up to 100 at 415 V, very high switching capacity L supplement required, see page /38 Basic price B 3VL DA unit B 3VL DA unit B 3VL DA unit B 3VL DA unit B 3VL DA unit B 3VL DA unit B 3VL DA unit B 3VL DA unit B 3VL DA unit B 3VL DA unit B 3VL17-2DA unit > 3 6 B 3VL DD unit B 3VL DD unit B 3VL DD unit B 3VL DD unit B 3VL DD unit B 3VL DD unit B 3VL DD unit B 3VL DD unit B 3VL17-2DD unit > 3 6 B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL27-2DC unit B 3VL27-3DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit > > B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit B 3VL DC unit ** Delivery time class A for supplement "0AA0", see page /38. Siemens LV /9

10 1 up to 00 A 3-pole Siemens AG 2008 Type Rated current I n Set current of the inverse-time delayed overload trip unit "L" I R Operating current of the instantaneous short-circuit releases "I" I i 1) Front busbar connection pieces are included in the scope of supply and are to be fitted by the customer. S function (short-time delayed shortcircuit releases I sd ) DT I cu up to 40/50 at 415 V, standard switching capacity N See "Overview". supplement required, see page /38 Basic price A A A A Fixed-mounted circuit breakers, VL0 to VL00, up to 00 A Magnetic and solid-state overcurrent trip units NSE0_00922 VL0/3VL2 System protection and generator protection, ETU20, LSI function for time-based discrimination (t sd = 0 to 0.5 s) I n 11 I n xI R B 3VL AE unit I n 11 I n xI R B 3VL AE unit I n 11 I n xI R B 3VL27-1AE unit VL250/3VL I n 11 I n xI R B 3VL AE unit I n 11 I n xI R B 3VL AE unit Connection type can be selected by assignment of the 12th position of the > Connection with box terminal 3 Connection with screw terminal 6 VL400/3VL I n 11 I n xI R B 3VL AE unit I n 11 I n xI R B 3VL AE unit VL630/3VL I n 10 I n xI R B 3VL AE unit VL800/3VL I n 8 I n xI R B 3VL AE unit VL1250/3VL I n 11 I n xI R B 3VL AE unit I n 10 I n xI R B 3VL AE unit VL00/3VL8 1) I n 9 I n xI R B 3VL87-1AE unit Motor and generator protection, ETU10M, LI function With permanently set trip class t C = 10, with phase failure sensitivity I n B 3VL AP unit NSE0_00705 VL0/3VL I n B 3VL AP unit I n B 3VL27-1AP unit VL250/3VL I n B 3VL AP unit I n B 3VL AP unit Connection type can be selected by assignment of the 12th position of the > Connection with box terminal 3 Connection with screw terminal 6 VL400/3VL I n B 3VL AP unit VL630/3VL I n B 3VL AP unit Motor protection, ETU30M, LI function With adjustable set trip class t C = 10, 20, 30, with phase failure sensitivity /8/11 I n B 3VL AS unit " ' VL0/3VL /8/11 I n B 3VL AS unit /8/11 I n B 3VL27-1AS unit VL250/3VL /8/11 I n B 3VL AS unit /8/11 I n B 3VL AS unit Connection type can be selected by assignment of the 12th position of the > Connection with box terminal 3 Connection with screw terminal 6 VL400/3VL /8/11 I n B 3VL AS unit VL630/3VL /8/12.5 I n B 3VL AS unit /10 Siemens LV

11 Siemens AG 2008 up to 00 A 3-pole DT I cu up to 70 at 415 V, high switching capacity H DT I cu up to 100 at 415 V, very high switching capacity L supplement required, see page /38 Basic price supplement required, see page /38 Basic price B 3VL AE unit B 3VL AE unit B 3VL AE unit B 3VL AE unit B 3VL27-2AE unit B 3VL27-3AE unit B 3VL AE unit B 3VL AE unit B 3VL AE unit B 3VL AE unit > > B 3VL AE unit B 3VL AE unit B 3VL AE unit B 3VL AE unit B 3VL AE unit B 3VL AE unit B 3VL AE unit B 3VL AE unit B 3VL AE unit B 3VL AE unit B 3VL AE unit B 3VL AE unit B 3VL87-2AE unit B 3VL87-3AE unit B 3VL AP unit B 3VL AP unit B 3VL AP unit B 3VL AP unit B 3VL27-2AP unit B 3VL27-3AP unit B 3VL AP unit B 3VL AP unit B 3VL AP unit B 3VL AP unit > > B 3VL AP unit B 3VL AP unit B 3VL AP unit B 3VL AP unit B 3VL AS unit B 3VL AS unit B 3VL AS unit B 3VL AS unit B 3VL27-2AS unit B 3VL27-3AS unit B 3VL AS unit B 3VL AS unit B 3VL AS unit B 3VL AS unit > > B 3VL AS unit B 3VL AS unit B 3VL AS unit B 3VL AS unit Siemens LV /11

12 up to 00 A 3-pole Siemens AG 2008 Type Rated current I n Set current of the inverse-time delayed overload trip unit "L" I R Operating current of the instantaneous short-circuit releases "I" I i DT I cu up to 40/50 at 415 V, standard switching capacity N See "Overview". supplement required, see page /38 Basic price A A A Fixed-mounted circuit breakers, VL0X to VL00, up to 00 A Magnetic and solid-state overcurrent trip units Starter combinations, I function Without overload release, with adjustable short-circuit release NSE0_00707 VL0/3VL B 3VL DK unit B 3VL DK unit B 3VL27-1DK unit VL250/3VL B 3VL DK unit Connection type can be selected by assignment of the 12th position of the > Connection with box terminal 3 Connection with screw terminal 6 VL400/3VL B 3VL DK unit B 3VL DK unit X 3VL DK unit VL630/3VL B 3VL DK unit B 3VL DK unit Non-automatic molded case circuit breakers 1) Without overload release, with permanently set short-circuit releases (for intrinsic protection only) NSE0_00708 VL0X/3VL B 3VL DE unit B 3VL17-1DE unit VL0/3VL B 3VL DE unit B 3VL27-1DE unit VL250/3VL B 3VL DE unit Connection type can be selected by assignment of the 12th position of the > Connection with box terminal 3 Connection with screw terminal 6 VL400/3VL B 3VL DE unit VL630/3VL B 3VL DE unit VL800/3VL B 3VL DE unit VL1250/3VL B 3VL DE unit VL00/3VL8 2) B 3VL87-1DE unit For further versions, including for short-circuit and ground-fault protection, see pages /14 to /17. 1) See also the Chapter "3K, 3KE, 3LD Switch Disconnectors". 3K. switch disconnectors are also available with rear-mounting operating mechanism and leading contacts. 2) Front busbar connection pieces are included in the scope of supply and are to be fitted by the customer. /12 Siemens LV

13 Siemens AG 2008 up to 00 A 3-pole DT I cu up to 70 at 415 V, high switching capacity H DT I cu up to 100 at 415 V, very high switching capacity L supplement required, see page /38 Basic price supplement required, see page /38 Basic price B 3VL DK unit B 3VL DK unit B 3VL DK unit B 3VL DK unit B 3VL27-2DK unit B 3VL27-3DK unit B 3VL DK unit B 3VL DK unit > > B 3VL DK unit B 3VL DK unit B 3VL DK unit B 3VL DK unit X 3VL DK unit X 3VL DK unit B 3VL DK unit B 3VL DK unit B 3VL DK unit B 3VL DK unit B 3VL DE unit B 3VL17-2DE unit B 3VL DE unit B 3VL DE unit B 3VL27-2DE unit B 3VL27-3DE unit B 3VL DE unit B 3VL DE unit > > B 3VL DE unit B 3VL DE unit B 3VL DE unit B 3VL DE unit B 3VL DE unit B 3VL DE unit B 3VL DE unit B 3VL DE unit B 3VL87-2DE unit B 3VL87-3DE unit Siemens LV /13

14 1 up to 00 A 3-pole Siemens AG 2008 Type Rated current I n Set current of the inverse-time delayed overload release "L" I R DT I cu up to 40/50 at 415 V, standard switching capacity N See "Overview". supplement required, see page /38 Price see page /18 A A Fixed-mounted circuit breakers, VL0 to VL00, up to 00 A Solid-state overcurrent trip units Circuit breakers with solid-state overcurrent trip unit ETU VL0/3VL B 3VL @@ unit Connection with box terminal B 3VL @@ unit B 3VL27-1@@ unit VL0/3VL B 3VL @@ unit Connection with screw terminal B 3VL @@ unit B 3VL27-1@@ unit VL250/3VL B 3VL @@ unit Connection with box terminal B 3VL @@ unit VL250/3VL B 3VL @@ unit Connection with screw terminal B 3VL @@ unit VL400/3VL B 3VL @@ unit ) B 3VL @@ unit ) VL630/3VL ) B 3VL @@ unit ) 630 1) B 3VL @@ unit ) VL800/3VL B 3VL @@ unit VL1250/3VL B 3VL @@ unit B 3VL @@ unit VL00/3VL8 3) B 3VL87-1@@ unit ETU trip units, 3-pole version L I supplements Motor protection with LI function, ETU10M Up to 500 A (VL0 to VL630) A P 4) System protection with LI function, ETU10 A B NSE0_00943 L System protection with LIG function, ETU12 For 3-wire three-phase systems 5) A C G I NSE0_00693 L S I System and generator protection with LSI function, ETU20 A E NSE0_00692 G L S I System and generator protection with LSIG function, ETU22 For 3-wire three-phase systems 5) A G NSE0_00694 Motor protection with LI function, ETU30M Up to 500 A (VL0 to VL630) A S 4) 5 - " ' L = Overload S = Short-circuit protection, short-time delayed I = Short-circuit protection, instantaneous G = Ground-fault protection /14 Siemens LV ) Not for motor protection. 2) Only for motor protection. 3) Front busbar connection pieces are included in the scope of supply and are to be fitted by the customer. 4) Not for VL400 with I n = 400 A, VL800, VL1250, VL00. 5) Vectorial summation current formation of the currents.

15 Siemens AG 2008 up to 00 A 3-pole DT I cu up to 70 at 415 V, high switching capacity H DT I cu up to 100 at 415 V, very high switching capacity L supplement required, see page /38 Price see page /18 supplement required, see page /38 Price see page /18 B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL27-2@@ unit B 3VL27-3@@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL27-2@@ unit B 3VL27-3@@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit ) B 3VL @@ unit ) B 3VL @@ unit ) B 3VL @@ unit ) B 3VL @@ unit ) B 3VL @@ unit ) B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL87-2@@ unit B 3VL87-3@@ unit supplements supplements A P 4) A P 4) A B A B A C A C A E A E A G A G A S 4) A S 4) Siemens LV /15

16 1 up to 00 A 3-pole Siemens AG 2008 Type Rated current I n Set current of the inverse-time delayed overload release "L" I R DT I cu up to 40/50 at 415 V, standard switching capacity N See "Overview". supplement required, see page /38 Price see page /18 A A Fixed-mounted circuit breakers, VL0 to VL00, up to 00 A Solid-state overcurrent trip units Circuit breakers with solid-state overcurrent trip unit ETU VL0/3VL B 3VL @@ unit Connection with box terminal B 3VL @@ unit B 3VL27-1@@ unit VL0/3VL B 3VL @@ unit Connection with screw terminal B 3VL @@ unit B 3VL27-1@@ unit VL250/3VL B 3VL @@ unit Connection with box terminal B 3VL @@ unit VL250/3VL B 3VL @@ unit Connection with screw terminal B 3VL @@ unit VL400/3VL B 3VL @@ unit ) B 3VL @@ unit ) VL630/3VL ) B 3VL @@ unit ) 630 5) B 3VL @@ unit ) VL800/3VL B 3VL @@ unit VL1250/3VL B 3VL @@ unit B 3VL @@ unit VL00/3VL8 6) B 3VL87-1@@ unit LCD ETU trip units, 3-pole version supplements Motor protection with LI function, ETU40M Up to 500 A (VL0 to VL630) C P 4) 5 - " ' L S I System protection with LI/LS/LSI function, ETU40 C H NSE0_00696 L S G I NSE0_00697 System protection with LSIG function, ETU42 For 3-wire three-phase systems 2) For 4-wire three-phase systems 1)2) C L C M L = Overload S = Short-circuit protection, short-time delayed I = Short-circuit protection, instantaneous G = Ground-fault protection 1) External current transformer required in addition, see page /69 and Technical Information LV 1 T "Function", "Ground-Fault Protection". 2) Vectorial summation current formation of the currents. 3) Only for motor protection. 4) Not for VL400 with I n = 400 A, VL800, VL1250, VL00. 5) Not for motor protection. 6) Front busbar connection pieces are included in the scope of supply and are to be fitted by the customer. / Siemens LV

17 Siemens AG 2008 up to 00 A 3-pole DT I cu up to 70 at 415 V, high switching capacity H DT I cu up to 100 at 415 V, very high switching capacity L supplement required, see page /38 Price see page /18 supplement required, see page /38 Price see page /18 B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL27-2@@ unit B 3VL27-3@@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL27-2@@ unit B 3VL27-3@@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit ) B 3VL @@ unit ) B 3VL @@ unit ) B 3VL @@ unit ) B 3VL @@ unit ) B 3VL @@ unit ) B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL87-2@@ unit B 3VL87-3@@ unit supplements supplements C P 4) C P 4) C H C H C L C M C L C M Siemens LV /17

18 up to 00 A 3-pole Siemens AG 2008 supplement (for complete Order No., see pages /14 to /17) Type VL0 3VL2 Rated current I n VL250 3VL3 VL400 3VL4 VL630 3VL5 VL800 3VL6 VL1250 3VL7 Trip units 63 A 100 A 0 A 200 A 250 A 315 A 400 A 630 A 800 A 1000 A 1250 A 00 A Price ETU10M A P ETU10 A B 2) 2) 2) VL00 3VL8 ETU12 A C 1) ETU20 A E ETU22 A G 1) ETU30M A S 2) 2) 2) ETU40M C P 2) 2) 2) ETU40 C H ETU42 C L ETU42 C M Standard switching capacity N High switching capacity H Very high switching capacity L = Not available 1) I g = I n, for adjustable ground-fault protection use LCD ETU42. 2) Rated current I n = 500 A. /18 Siemens LV

19 Siemens AG 2008 up to 00 A 3-pole Contact units (only in combination with electronic trip unit! See pages /20 and /21) VL0 to VL00, up to 00 A 2) + Type Rated current DT I cu up to 40/50 at 415 V, I standard switching capacity N n See "Overview". Basic price A With box terminals for contact units and electronic trip units VL0/3VL2 0 B 3VL27-1AA33-0AA0 1 1 unit With screw terminal connections for contact units and electronic trip units VL0/3VL2 0 B 3VL27-1AA36-0AA0 1 1 unit VL250/3VL3 250 B 3VL AA36-0AA0 1 1 unit VL400/3VL4 400 B 3VL AA36-0AA0 1 1 unit VL630/3VL5 630 A 3VL AA36-0AA0 1 1 unit VL800/3VL6 800 A 3VL AA36-0AA0 1 1 unit VL1250/3VL A 3VL AA36-0AA0 1 1 unit VL00/3VL8 1) 00 A 3VL87-1AA30-0AA0 1 1 unit Type Rated current DT I cu up to 70 at 415 V, I high switching capacity H n See "Overview". Basic price A With box terminals for contact units and electronic trip units VL0/3VL2 0 B 3VL27-2AA33-0AA0 1 1 unit With screw terminal connections for contact units and electronic trip units VL0/3VL2 0 B 3VL27-2AA36-0AA0 1 1 unit VL250/3VL3 250 B 3VL AA36-0AA0 1 1 unit VL400/3VL4 400 B 3VL AA36-0AA0 1 1 unit VL630/3VL5 630 A 3VL AA36-0AA0 1 1 unit VL800/3VL6 800 A 3VL AA36-0AA0 1 1 unit VL1250/3VL A 3VL AA36-0AA0 1 1 unit VL00/3VL8 1) 00 A 3VL87-2AA30-0AA0 1 1 unit Type 1) Front busbar connection pieces are included in the scope of supply and are to be fitted by the customer. Rated current DT I cu up to 100 at 415 V, I very high switching capacity L n See "Overview". Basic price 2) Non-automatic molded case circuit breakers are available only as complete units from the factory (for selection and ordering data, see page /12). A With box terminals for contact units and electronic trip units VL0/3VL2 0 B 3VL27-3AA33-0AA0 1 1 unit With screw terminal connections for contact units and electronic trip units VL0/3VL2 0 B 3VL27-3AA36-0AA0 1 1 unit VL250/3VL3 250 B 3VL AA36-0AA0 1 1 unit VL400/3VL4 400 B 3VL AA36-0AA0 1 1 unit VL630/3VL5 630 A 3VL AA36-0AA0 1 1 unit VL800/3VL6 800 A 3VL AA36-0AA0 1 1 unit VL1250/3VL A 3VL AA36-0AA0 1 1 unit VL00/3VL8 1) 00 A 3VL87-3AA30-0AA0 1 1 unit Siemens LV /19

20 up to 00 A 3-pole Siemens AG For circuit breakers Rated current I n Set current of the inverse-time delayed overload trip unit "L" I r Operating current of the instantaneous short-circuit releases "I" I i DT Price Type A A A Electronic trip units (only in combination with contact unit see page /19) TM trip units System protection with LI function Box terminals/screw terminal connections in the scope of supply with the contact units VL0/3VL A 3VL DC unit A 3VL DC unit A 3VL DC unit A 3VL DC unit A 3VL DC unit A 3VL9 2-7DC unit VL250/3VL A 3VL DC unit A 3VL DC unit VL400/3VL B 3VL DC unit B 3VL DC unit B 3VL DC unit A 3VL DC unit VL630/3VL A 3VL DC unit A 3VL DC unit A 3VL DC unit A 3VL DC unit Magnetic trip units Starter protection with I function Box terminals/screw terminal connections in the scope of supply with the contact units VL0/3VL A 3VL DK unit A 3VL DK unit A 3VL9 2-7DK unit VL250/3VL A 3VL DK unit VL400/3VL B 3VL DK unit B 3VL DK unit B 3VL DK unit VL630/3VL A 3VL DK unit A 3VL DK unit /20 Siemens LV

21 Siemens AG 2008 up to 00 A 3-pole + For circuit breakers Set current of the inverse-time delayed overload release "L" I R DT Price = 1 PG = 113 Type A Electronic trip units (only in combination with contact unit see page /19) ETU trip units For tripping functions see 10th position of the circuit breaker on the previous pages. Box terminals/screw terminal connections in the scope of supply of the contact units VL0/ 3VL2 VL250/ 3VL3 VL400/ 3VL4 VL630/ 3VL5 VL800/ 3VL6 VL1250/ 3VL7 VL00/ 3VL A 3VL @@ A 3VL @@ A 3VL9 2-6@@ A 3VL @@ A 3VL @@ A 3VL @@ A 3VL @@ A 3VL @@ A 3VL @@ A 3VL @@ A 3VL @@ A 3VL @@ A 3VL9 8-6@@30 AP 1) AB 1) AC 1) AE 1) AG 1) AS 1) Trip units ETU10M ETU10 ETU12 ETU20 ETU22 ETU30M LCD ETU trip units For tripping functions see 10th position of the circuit breaker on the previous pages. Box terminals/screw terminal connections in the scope of supply of the contact units VL0/ 3VL2 VL250/ 3VL3 VL400/ 3VL4 VL630/ 3VL5 VL800/ 3VL6 VL1250/ 3VL7 VL00/ 3VL A 3VL @@30 When the solid-state overcurrent trip unit has been A 3VL @@30 installed in the circuit breaker, it is recommended that it is tested using the 3VL AK00 function A 3VL9 2-6@@30 tester A A 3VL @@30 3VL @@30 When ordering trip units, insert the function specification in the A 3VL @@ A 3VL @@ A 3VL @@ A 3VL @@ A 3VL @@ A 3VL @@ A 3VL @@ A 3VL9 8-6@@30 Not available Package size = 1 unit, i.e. 1 unit or a multiple thereof can be ordered. Price group 113. Weight on request 1) For description see Technical Information LV 1 T "Function", "TM Thermal-Magnetic Overcurrent Trip Units", "ETU Solid-State Overcurrent Trip Units" and "LCD ETU Solid-State Overcurrent Trip Units". CP 1) CH 1) CL 1) CM 1) Trip units ETU40M ETU40 ETU42 ETU42 Siemens LV /21

22 up to 00 A 4-pole Selection and ordering data Type Rated current I n Set current of the inverse-time delayed overload trip unit "L" I R Operating current of the instantaneous short-circuit releases "I" I i DT ** I cu up to 40/50 at 415 V, standard switching capacity N See "Overview". supplement required, see page /38 Basic price A A A Fixed-mounted circuit breakers, VL0X to VL630, up to 630 A Thermal-magnetic overcurrent trip units Siemens AG 2008 System protection, TM, LI function With permanently set thermal overload releases, permanently set short-circuit releases, without overload and short-circuit releases in 4th pole (N) NSE0_00695 VL0X/3VL1 300 B 3VL EH unit B 3VL EH unit B 3VL EH unit B 3VL EH unit B 3VL EH unit B 3VL EH unit B 3VL EH unit B 3VL EH unit B 3VL EH unit B 3VL EH unit B 3VL17-1EH unit Connection can be selected by assignment of the 12th position of the Connection with box terminal 3 Connection with screw terminal 1) 6 System protection, TM, LI function With adjustable thermal overload releases, adjustable short-circuit releases, without overload and short-circuit releases in 4th pole (N) > NSE0_00704 VL0/3VL B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL27-1EJ unit VL250/3VL B 3VL EJ unit B 3VL EJ unit Connection can be selected by assignment of the 12th position of the Connection with box terminal 3 Connection with screw terminal 1) 6 VL400/3VL B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit VL630/3VL B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit ** Delivery time class A for supplement "0AA0", see page /38. 1) Cannot be used in conjunction with RCD module. > /22 Siemens LV

23 Siemens AG 2008 up to 00 A 4-pole DT ** I cu up to 70 at 415 V, high switching capacity H DT ** I cu up to 100 at 415 V, very high switching capacity L supplement required, see page /38 Basic price supplement required, see page /38 Basic price B 3VL EH unit B 3VL EH unit B 3VL EH unit B 3VL EH unit B 3VL EH unit B 3VL EH unit B 3VL EH unit B 3VL EH unit B 3VL EH unit B 3VL EH unit B 3VL17-2EH unit > 3 6 B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL27-2EJ unit B 3VL27-3EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit > > B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit B 3VL EJ unit ** Delivery time class A for supplement "0AA0", see page /38. Siemens LV /23

24 up to 00 A 4-pole Siemens AG 2008 Type Rated current I n Set current of the inverse-time delayed overload trip unit "L" I R Operating current of the instantaneous short-circuit releases "I" I i DT ** I cu up to 40/50 at 415 V, standard switching capacity N See "Overview". supplement required, see page /38 Basic price A A A Fixed-mounted circuit breakers, VL0X to VL630, up to 630 A Thermal-magnetic overcurrent trip units System protection, TM, LIN function With permanently set thermal overload releases, permanently set short-circuit releases, with "N" overload and short-circuit release N = 100 % protection for overload and short-circuit releases NSE0_00695 VL0X/3VL1 300 B 3VL EA unit B 3VL EA unit B 3VL EA unit B 3VL EA unit B 3VL EA unit B 3VL EA unit B 3VL EA unit B 3VL EA unit B 3VL EA unit B 3VL EL unit B 3VL17-1EL unit Connection can be selected by assignment of the 12th position of the Connection with box terminal 3 Connection with screw terminal 1) 6 System protection, TM, LIN function With permanently set thermal overload releases, permanently set short-circuit releases, with "N" overload and short-circuit release N = 60 % protection for overload and short-circuit releases > NSE0_00695 VL0X/3VL B 3VL EA unit B 3VL17-1EA unit Connection can be selected by assignment of the 12th position of the Connection with box terminal 3 Connection with screw terminal 1) 6 ** Delivery time class A for supplement "0AA0", see page /38. 1) Cannot be used in conjunction with RCD module. > /24 Siemens LV

25 Siemens AG 2008 up to 00 A 4-pole DT ** I cu up to 70 at 415 V, high switching capacity H DT ** I cu up to 100 at 415 V, very high switching capacity L supplement required, see page /38 Basic price supplement required, see page /38 Basic price B 3VL EA unit B 3VL EA unit B 3VL EA unit B 3VL EA unit B 3VL EA unit B 3VL EA unit B 3VL EA unit B 3VL EA unit B 3VL EA unit B 3VL EL unit B 3VL17-2EL unit > 3 6 B 3VL EA unit B B 3VL17-2EA unit B > 3 6 ** Delivery time class A for supplement "0AA0", see page /38. Siemens LV /25

26 up to 00 A 4-pole Siemens AG 2008 Type Rated current I n Set current of the inverse-time delayed overload trip unit "L" I R Operating current of the instantaneous short-circuit releases "I" I i DT I cu up to 40/50 at 415 V, standard switching capacity N See "Overview" supplement required, see page /38 Basic price A A A Fixed-mounted circuit breakers, VL0X to VL630, up to 630 A Thermal-magnetic overcurrent trip units System protection, TM, LIN function With adjustable thermal overload releases, adjustable short-circuit releases, with "N" overload and short-circuit release N = 100 % protection for overload and short-circuit releases NSE0_00704 VL0/3VL B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL27-1EM unit VL250/3VL B 3VL EM unit B 3VL EM unit Connection can be selected by assignment of the 12th position of the Connection with box terminal 3 Connection with screw terminal 6 VL400/3VL B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit VL630/3VL B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit System protection, TM, LIN function With adjustable thermal overload releases, adjustable short-circuit releases, with "N" overload and short-circuit release N = 60 % protection for overload and short-circuit releases > NSE0_00704 VL0/3VL B 3VL EC unit B 3VL27-1EC unit VL250/3VL B 3VL EC unit B 3VL EC unit Connection can be selected by assignment of the 12th position of the Connection with box terminal 3 Connection with screw terminal 6 VL400/3VL B 3VL EC unit B 3VL EC unit B 3VL EC unit B 3VL EC unit VL630/3VL B 3VL EC unit B 3VL EC unit B 3VL EC unit B 3VL EC unit > /26 Siemens LV

27 Siemens AG 2008 up to 00 A 4-pole DT I cu up to 70 at 415 V, high switching capacity H DT I cu up to 100 at 415 V, very high switching capacity L supplement required, see page /38 Basic price supplement required, see page /38 Basic price B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL27-2EM unit B 3VL27-3EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit > > B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EM unit B 3VL EC unit B 3VL EC unit B 3VL27-2EC unit B 3VL27-3EC unit B 3VL EC unit B 3VL EC unit B 3VL EC unit B 3VL EC unit > > B 3VL EC unit B 3VL EC unit B 3VL EC unit B 3VL EC unit B 3VL EC unit B 3VL EC unit B 3VL EC unit B 3VL EC unit B 3VL EC unit B 3VL EC unit B 3VL EC unit B 3VL EC unit B 3VL EC unit B 3VL EC unit B 3VL EC unit B 3VL EC unit Siemens LV /27

28 up to 00 A 4-pole Siemens AG 2008 Type Rated current I n Set current of the inverse-time delayed overload trip unit "L" I R Operating S function current of the (short-time instantaneous delayed short-circuit short-circuit releases "I" releases) I i I sd DT I cu up to 40/50 at 415 V, standard switching capacity N See "Overview" supplement required, see page /38 Basic price A A A A Fixed-mounted circuit breakers, VL0X to VL00, up to 00 A Magnetic and solid-state overcurrent trip units System protection and generator protection, ETU20, LSIN function for time-based discrimination (t sd = 0 to 0.5 s), with overload and short-circuit releases in 4th pole (N) NSE0_00922 VL0/3VL I n 11 I n xI R B 3VL BF unit I n 11 I n xI R B 3VL BF unit I n 11 I n xI R B 3VL27-1BF unit VL250/3VL I n 11 I n xI R B 3VL BF unit I n 11 I n xI R B 3VL BF unit Connection can be selected by assignment of the 12th position of the Connection with box terminal 3 Connection with screw terminal 6 VL400/3VL I n 11 I n xI R B 3VL BF unit I n 11 I n xI R B 3VL BF unit VL630/3VL I n 10 I n xI R B 3VL BF unit VL800/3VL I n 8 I n xI R B 3VL BF unit VL1250/3VL I n 11 I n xI R B 3VL BF unit I n 10 I n xI R B 3VL BF unit VL00/3VL8 2) I n 9 I n xI R B 3VL87-1BF unit Non-automatic molded case circuit breakers 1) Without overload release, with permanently set short-circuit release (for intrinsic protection only), without overload and short-circuit releases in 4th pole (N) > NSE0_00708 VL0X/3VL B 3VL EE unit B 3VL17-1EE unit VL0/3VL B 3VL EE unit B 3VL27-1EE unit VL250/3VL B 3VL EE unit Connection can be selected by assignment of the 12th position of the Connection with box terminal 3 Connection with screw terminal 6 VL400/3VL B 3VL EE unit VL630/3VL B 3VL EE unit VL800/3VL B 3VL EE unit VL1250/3VL B 3VL EE unit VL00/3VL8 2) B 3VL87-1EE unit ) See also the Chapter "3K, 3KE, 3LD Switch Disconnectors". 3K. switch disconnectors are also available with rear-mounting operating mechanism and leading contacts. 2) Front busbar connection pieces are included in the scope of supply and are to be fitted by the customer. > N = 100 % protection for I n 100 A N = 50 % protection for I n 110 A /28 Siemens LV

29 Siemens AG 2008 up to 00 A 4-pole DT I cu up to 70 at 415 V, high switching capacity H DT I cu up to 100 at 415 V, very high switching capacity L supplement required, see page /38 Basic price supplement required, see page /38 Basic price B 3VL BF unit B 3VL BF unit B 3VL BF unit B 3VL BF unit B 3VL27-2BF unit B 3VL27-3BF unit B 3VL BF unit B 3VL BF unit B 3VL BF unit B 3VL BF unit > > B 3VL BF unit B 3VL BF unit B 3VL BF unit B 3VL BF unit B 3VL BF unit B 3VL BF unit B 3VL BF unit B 3VL BF unit B 3VL BF unit B 3VL BF unit B 3VL BF unit B 3VL BF unit B 3VL87-2BF unit B 3VL87-3BF unit B 3VL EE unit B 3VL17-2EE unit B 3VL EE unit B 3VL EE unit B 3VL27-2EE unit B 3VL27-3EE unit B 3VL EE unit B 3VL EE unit > > B 3VL EE unit B 3VL EE unit B 3VL EE unit B 3VL EE unit B 3VL EE unit B 3VL EE unit B 3VL EE unit B 3VL EE unit B 3VL87-2EE unit B 3VL87-3EE unit Siemens LV /29

30 up to 00 A 4-pole Siemens AG 2008 Type Rated current I n Set current of the inverse-time delayed overload release "L" I R DT I cu up to 40/50 at 415 V, standard switching capacity N See "Overview". supplement required, see page /38 Price see page /34 A A Fixed-mounted circuit breakers, VL0 to VL00, VL00 A Solid-state overcurrent trip units Circuit breakers with solid-state overcurrent trip unit ETU VL0/3VL B 3VL @@ unit Connection with box terminal B 3VL @@ unit B 3VL27-1@@ unit VL0/3VL B 3VL @@ unit Connection with screw terminal VL250/3VL3 Connection with box terminal B 3VL @@ unit B 3VL27-1@@ unit B 3VL @@ unit B 3VL @@ unit VL250/3VL B 3VL @@ unit Connection with screw terminal B 3VL @@ unit VL400/3VL B 3VL @@ unit B 3VL @@ unit VL630/3VL B 3VL @@ unit VL800/3VL B 3VL @@ unit VL1250/3VL B 3VL @@ unit B 3VL @@ unit VL00/3VL8 1) B 3VL87-1@@ unit ETU trip units, 4-pole versions System protection with LIN function, ETU10 With overload and short-circuit releases in 4th pole (N) supplements B A L I NSE0_00691 L System protection with LING function, ETU12 Residual current for 4-wire three-phase systems With overload and short-circuit releases in 4th pole (N) B D G I G NSE0_00693 L S I NSE0_00692 L S I NSE0_00694 System protection with LSIN function, ETU20 With overload and short-circuit releases in 4th pole (N) System protection with LSING function, ETU22 Residual current for 4-wire three-phase systems With overload and short-circuit releases in 4th pole (N) B F B H 1) Front busbar connection pieces are included in the scope of supply and are to be fitted by the customer. N = 100 % protection for I n 100 A N = 50 % protection for I n 110 A L = Overload S = Short-circuit protection, short-time delayed I = Short-circuit protection, instantaneous G = Ground-fault protection N = Neutral conductor protection /30 Siemens LV

31 Siemens AG 2008 up to 00 A 4-pole DT I cu up to 70 at 415 V, high switching capacity H DT I cu up to 100 at 415 V, very high switching capacity L supplement required, see page /38 Price see page /34 supplement required, see page /38 Price see page /34 B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL27-2@@ unit B 3VL27-3@@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL27-2@@ unit B 3VL27-3@@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL87-2@@ unit B 3VL87-3@@ unit supplements supplements B A B A B D B D B F B F B H B H Siemens LV /31

32 up to 00 A 4-pole Siemens AG 2008 Type Rated current I n Set current of the inverse-time delayed overload release "L" I R DT I cu up to 40/50 at 415 V, standard switching capacity N See "Overview" supplement required, see page /38 Price see page /34 A A Fixed-mounted circuit breakers, VL0 to VL00, up to 00 A Solid-state overcurrent trip units Circuit breakers with solid-state overcurrent trip unit ETU VL0/3VL B 3VL @@ unit Connection with box terminal B 3VL @@ unit B 3VL27-1@@ unit VL0/3VL B 3VL @@ unit Connection with screw terminal B 3VL @@ unit B 3VL27-1@@ unit VL250/3VL B 3VL @@ unit Connection with box terminal B 3VL @@ unit VL250/3VL B 3VL @@ unit Connection with screw terminal B 3VL @@ unit VL400/3VL B 3VL @@ unit B 3VL @@ unit VL630/3VL B 3VL @@ unit VL800/3VL B 3VL @@ unit VL1250/3VL B 3VL @@ unit B 3VL @@ unit VL00/3VL8 1) B 3VL87-1@@ unit LCD ETU trip units, 4-pole version System protection with LI/LSI/LIN/LSIN function, ETU40 L With overload and short-circuit release in 4th pole (N) supplements CJ S I NSE0_00696 L S G I NSE0_00697 System protection with LSIG/LSING function, ETU42 For 4-wire three-phase systems with overload and short-circuit release in 4th pole (N) C N 1) Front busbar connection pieces are included in the scope of supply and are to be fitted by the customer. N = 100 % protection for I n 100 A % or can be switched off, factory preset at 50 % /32 Siemens LV

33 Siemens AG 2008 up to 00 A 4-pole DT I cu up to 70 at 415 V, high switching capacity H DT I cu up to 100 at 415 V, very high switching capacity L supplement required, see page /38 Price see page /34 supplement required, see page /38 Price see page /34 B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL27-2@@ unit B 3VL27-3@@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL27-2@@ unit B 3VL27-3@@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL87-2@@ unit B 3VL87-3@@ unit supplements supplements CJ CJ CN CN Siemens LV /33

34 up to 00 A 4-pole Siemens AG 2008 supplement Type (for complete, VL0 VL250 VL400 VL630 VL800 VL1250 VL00 see pages /30 to /33) 3VL2 3VL3 3VL4 3VL5 3VL6 3VL7 3VL8 Rated current I n Trip units 63 A 100 A 0 A 200 A 250 A 315 A 400 A 630 A 800 A 1000 A 1250 A 00 A ETU10 B A Price ETU12 B D ETU20 B F ETU22 B H ETU40 C J ETU42 C N Standard switching capacity N High switching capacity H Very high switching capacity L /34 Siemens LV

35 Siemens AG 2008 up to 00 A 4-pole Contact units (only in combination with electronic trip unit! See pages /36 and /37), VL0 to VL00, up to 00 A 2) + Diagram shows 3-pole combination Type Rated current DT I cu up to 40/50 at 415 V, I n standard switching capacity N See "Overview" Switching all poles Basic price With box terminals for contact units and electronic trip units VL0/3VL2 0 B 3VL27-1AA43-0AA0 1 1 unit With screw terminal connections for contact units and electronic trip units VL0/3VL2 0 B 3VL27-1AA46-0AA0 1 1 unit VL250/3VL3 250 B 3VL AA46-0AA0 1 1 unit VL400/3VL4 400 B 3VL AA46-0AA0 1 1 unit VL630/3VL5 630 A 3VL AA46-0AA0 1 1 unit VL800/3VL6 800 A 3VL AA46-0AA0 1 1 unit VL1250/3VL A 3VL AA46-0AA0 1 1 unit VL00/3VL8 1) 00 A 3VL87-1AA40-0AA0 1 1 unit Type Rated current DT I cu up to 70 at 415 V, I n high switching capacity H See "Overview" Switching all poles Basic price A With box terminals for contact units and electronic trip units VL0/3VL2 0 B 3VL27-2AA43-0AA0 1 1 unit With screw terminal connections for contact units and electronic trip units VL0/3VL2 0 B 3VL27-2AA46-0AA0 1 1 unit VL250/3VL3 250 B 3VL AA46-0AA0 1 1 unit VL400/3VL4 400 B 3VL AA46-0AA0 1 1 unit VL630/3VL5 630 A 3VL AA46-0AA0 1 1 unit VL800/3VL6 800 A 3VL AA46-0AA0 1 1 unit VL1250/3VL A 3VL AA46-0AA0 1 1 unit VL00/3VL8 1) 00 A 3VL87-2AA40-0AA0 1 1 unit Type Rated current DT I cu up to 100 at 415 V, I n very high switching capacity L See "Overview" 1) Front busbar connections are included in the scope of supply and are to be fitted by the customer. 2) Non-automatic molded case circuit breakers are available only as complete units from the factory (for selection and ordering data, see page /28). Switching all poles Basic price A With box terminals for contact units and electronic trip units VL0/3VL2 0 B 3VL27-3AA43-0AA0 1 1 unit With screw terminal connections for contact units and electronic trip units VL0/3VL2 0 B 3VL27-3AA46-0AA0 1 1 unit VL250/3VL3 250 B 3VL AA46-0AA0 1 1 unit VL400/3VL4 400 B 3VL AA46-0AA0 1 1 unit VL630/3VL5 630 A 3VL AA46-0AA0 1 1 unit VL800/3VL6 800 A 3VL AA46-0AA0 1 1 unit VL1250/3VL A 3VL AA46-0AA0 1 1 unit VL00/3VL8 1) 00 A 3VL87-3AA40-0AA0 1 1 unit Siemens LV /35

36 up to 00 A 4-pole Siemens AG Diagram shows 3-pole combination For circuit breaker Rated current Set current of the inverse-time delayed overload release "L" I r Operating current of the instantaneous short-circuit releases "I" I i Type A A A Electronic trip units (only in combination with contact unit see page /35) TM trip units System protection with LI/LIN function Box terminals/screw terminal connections in the scope of supply of the contact unit DT Price VL0/3VL A 3VL @@ A 3VL @@ A 3VL @@ A 3VL @@ A 3VL @@ A 3VL9 2-7@@40 VL250/3VL A 3VL @@ A 3VL @@40 VL400/3VL A 3VL @@ A 3VL @@ A 3VL @@ A 3VL @@40 VL630/3VL A 3VL @@ A 3VL @@ A 3VL @@ A 3VL @@40 Not available Package size = 1 unit, i.e. 1 unit or a multiple thereof can be ordered. Price group 113. Weight on request Overload and short-circuit release EC EM EJ With overload and short-circuit release in 4th pole (N) N = 60% protection With overload and short-circuit release in 4th pole (N) N = 100 % protection Without overload and short-circuit release in 4th pole (N) When ordering trip units, insert the function specification in the /36 Siemens LV

37 Siemens AG 2008 up to 00 A 4-pole + Diagram shows 3-pole combination For circuit breakers Set current of the inverse-time delayed overload release "L" I R DT Price = 1 PG = 113 Type A Left pole = N Electronic trip units (only in combination with contact unit see page /35) ETU trip units For tripping functions see 10th position of the circuit breaker on the previous pages. Box terminals/screw terminal connections in the scope of supply of the contact unit VL0/3VL A 3VL @@40 ETU - overload and short-circuit release A 3VL @@40 in the N Pole set to 100 % I R = 26 to 100 A and 50 % 110 to 00 A A 3VL9 2-6@@40 VL250/3VL A 3VL @@ A 3VL @@40 VL400/3VL A 3VL @@ A 3VL @@40 VL630/3VL A 3VL @@40 VL800/3VL A 3VL @@40 VL1250/3VL A 3VL @@ A 3VL @@40 VL00/3VL A 3VL9 8-6@@40 BA 1) BD 1) BF 1) BH 1) Trip units ETU10 ETU12 ETU20 ETU22 LCD ETU trip units For tripping functions see 10th position of the circuit breaker on the previous pages. Box terminals/screw terminal connections in the scope of supply of the contact unit VL0/3VL A 3VL @@40 When the solid-state overcurrent trip A 3VL @@40 units have been installed in the circuit breaker, it is recommended that they A 3VL9 2-6@@40 are tested using the 3VL AK00 VL250/3VL A 3VL @@40 function tester A 3VL @@40 When ordering trip units, insert the function specification in the VL400/3VL A 3VL @@40 LCD trip unit N protection selectable A 3VL @@40 50 % % or can be switched off VL630/3VL A 3VL @@40 VL800/3VL A 3VL @@40 VL1250/3VL A 3VL @@ A 3VL @@40 VL00/3VL A 3VL9 8-6@@40 CJ 1) CN 1) Trip units ETU40 ETU42 Package size = 1 unit, i.e. 1 unit or a multiple thereof can be ordered. Price group 113. Weight on request 1) For description see Technical Information LV 1 T "Function", "TM Thermal-Magnetic Overcurrent Trip Units", "ETU Solid-State Overcurrent Trip Units" and "LCD ETU Solid-State Overcurrent Trip Units". Siemens LV /37

38 up to 00 A Options Siemens AG 2008 Selection and ordering data 1st supplement: Undervoltage or shunt trip unit, wiring directly to accessories Rated control supply voltage U s /frequency AC 50/60 Hz DC supplement Circuit breakers Type 3VL.... VL0X to VL400 1) / 3VL1 to 3VL4 VL630 to VL00/ 3VL5 to 3VL8 Additional price Without auxiliary trip units 0 A Without Without With undervoltage trip units Only right pole V AC V DC 12 2 N x 1) x 24 2 P x 1) x 48 2 U x 1) x 60 2 V x 1) x R x 1) x N O x 1) x 24 2 D x 1) x G x 1) x H x 1) x M x 1) x Q x 1) x J x 1) x K x 1) x L x 1) x T x 1) x With shunt trip units Only right pole V AC V DC C x 1) x J x 1) x K x 1) x Q x 1) x M x 1) x R x 1) x T x 1) x V x 1) x Additional price 2nd supplement: Auxiliary switches (HS) and alarm switches (AS), left/right pole, directly wired to accessories Equipment supplement Circuit breakers HS = 1 NO or 1 NC switching block AS = 1 NO switching block x = Additional price Type 3VL.... VL0X to VL400 2) / 3VL1 to 3VL4 Additional price Without auxiliary/alarm switches A 0 Without Without 2 HS (1 NO/1 NC) 3) B 1 x 2)5) 4 HS (2 NO/2 NC) C 1 x 5) 2 HS (1 NO/1 NC) + 1 AS (1 NO) D 1 x 2)5) 2 HS (1 NO/1 NC) + 1 AS (1 NO) 4) E 1 x 5) = Not available 1) For VL0/VL250 circuit breakers with solid-state overcurrent trip units, the only option is one undervoltage trip unit or shunt trip unit, or one auxiliary/alarm switch combination. 2) Except for mounting in the left accessory sub-section of the SENTRON VL0X circuit breakers with RCD module and the SENTRON VL0, VL250 circuit breakers with solid-state overcurrent trip units, since this sub-section is occupied by the tripping solenoid. On the right-hand side it is only possible to install an auxiliary trip unit or an auxiliary/alarm switch combination (see also Technical Information LV 1 T "Design", "Auxiliary Trip Units and Auxiliary Switches"). For this application only, a 3SB adapter can be installed in the N pole (for 4-pole circuit breakers only). 3) With mounting adapter up to 3 HS. 4) With mounting adapter up to 2 HS + 2 AS. 5) Not possible for use of COM10 (PROFIBUS module for SENTRON 3VL). VL630 to VL00/ 3VL5 to 3VL8 Additional price /38 Siemens LV

39 Siemens AG 2008 up to 00 A Options When ordering, add "-Z" to the complete and add the relevant order code(s). with " Z" VL Z and additional @ Additional price For fixed-mounted circuit breakers (wired in factory) Wiring for internal accessories (auxiliary switches, alarm switches, auxiliary trip units not included in scope of supply) with connecting cables (3 m long) brought out at the rear Wiring for motorized operating mechanisms 1) (motorized operating mechanism not included in scope of supply, to order see pages /48 to /43) With connecting cables (3 m long), brought out at the top on VL0X to VL400, or brought out at the right on VL630 to VL00 Can be ordered only in conjunction with motorized operating mechanisms. Motorized operating mechanisms 1) (24 V DC) Mounted on the circuit breaker (motorized operating mechanism included in scope of supply) With wiring for internal accessories of the circuit breaker with connecting cables (3 m long) brought out at the rear, (auxiliary switches, alarm switches, auxiliary trip units not included in scope of supply) Motorized operating mechanisms 1) ( V AC/DC) Mounted on the circuit breaker (motorized operating mechanism included in scope of supply) With wiring for internal accessories of the circuit breaker with connecting cables (3 m long) brought out at the rear, (auxiliary switches, alarm switches, auxiliary trip units not included in scope of supply) Motorized operating mechanisms 1) (60 V AC/DC) Mounted on the circuit breaker (motorized operating mechanism included in scope of supply) With wiring for internal accessories of the circuit breaker with connecting cables (3 m long) brought out at the rear, (auxiliary switches, alarm switches, auxiliary trip units not included in scope of supply) Motorized operating mechanisms 1) ( V AC/DC) Mounted on the circuit breaker (motorized operating mechanism included in scope of supply) With wiring for internal accessories of the circuit breaker with connecting cables (3 m long) brought out at the rear, (auxiliary switches, alarm switches, auxiliary trip units not included in scope of supply) Motorized operating mechanisms 1) ( V AC/DC) Mounted on the circuit breaker (motorized operating mechanism included in scope of supply) With wiring for internal accessories of the circuit breaker with connecting cables (3 m long) brought out at the rear, (auxiliary switches, alarm switches, auxiliary trip units not included in scope of supply) VL0X to VL00 (3VL1 to 3VL8) VL0X to VL00 (3VL1 to 3VL8) VL0X, VL0, VL250 (3VL1, 3VL2, 3VL3) VL400 (3VL4) VL630, VL800 (3VL5, 3VL6) VL1250, VL00 (3VL7, 3VL8) VL0X, VL0, VL250 (3VL1, 3VL2, 3VL3) VL400 (3VL4) VL630, VL800 (3VL5, 3VL6) VL1250, VL00 (3VL7, 3VL8) VL0X, VL0, VL250 (3VL1, 3VL2, 3VL3) VL400 (3VL4) VL630, VL800 (3VL5, 3VL6) VL1250, VL00 (3VL7, 3VL8) VL0X, VL0, VL250 (3VL1, 3VL2, 3VL3) VL400 (3VL4) VL630, VL800 (3VL5, 3VL6) VL1250, VL00 (3VL7, 3VL8) VL0X, VL0, VL250 (3VL1, 3VL2, 3VL3) VL400 (3VL4) VL630, VL800 (3VL5, 3VL6) VL1250, VL00 (3VL7, 3VL8) L 0 2 L 1 2 M 2 4 M 4 2 M 6 0 M 1 1 M 2 2 Code for further versions Z x x x x x x x x x x x x x x x x x x x x x x x = Additional price 1) Version not for VL0X/3VL1 to VL250/3VL3 with 3VL MA00 to 3VL ME00 motorized operating mechanism. Siemens LV /39

40 up to 00 A Accessories/spare parts Selection and ordering data Siemens AG 2008 Wiring directly at accessories DT For VL0X to VL400 (3VL1 to 3VL4) Price NSE0_00684 Auxiliary switches and auxiliary trip units 3- or 4-pole For retrofitting (for possible complements, see figure in Technical Information LV 1 T "Design", "Auxiliary Trip Units and Auxiliary Switches") Auxiliary switches (HS) and alarm switches (AS) For retrofitting Kits Mounting sides 2 HS (1 NO + 1 NC) N, left 1), right A 3VL AB unit HS (2 NO + 2 NC) N, left, right 2 HS (1 NC + 1 NO) Left, right 3) A 3VL AD unit AS (1 NO) (kit) Left Additional auxiliary switch/alarm switch combinations See page /42. 3VL A.00 Shunt trip units 2) For retrofitting NSE0_00678 V AC V DC Mounting side Right pole only A 3VL SC unit Right pole only A 3VL SJ unit Right pole only A 3VL SK unit Right pole only A 3VL SQ unit Right pole only A 3VL SM unit Right pole only A 3VL SR unit Right pole only A 3VL ST unit Right pole only A 3VL SV unit Undervoltage trip units For retrofitting V AC V DC Mounting side 12 Right pole only A 3VL UN unit Right pole only A 3VL UP unit Right pole only A 3VL UU unit Right pole only A 3VL UV unit VL S.00, 24 Right pole only A 3VL UD unit VL U Right pole only A 3VL UG unit Right pole only A 3VL UR unit Right pole only A 3VL UM unit Right pole only A 3VL UH unit Right pole only A 3VL US unit Right pole only A 3VL UQ unit Right pole only A 3VL UJ unit Right pole only A 3VL UK unit Right pole only A 3VL UL unit Right pole only A 3VL UT unit Time-delay devices for undervoltage trip units ( V DC) Rated control supply voltage U s 220 V V AC/DC Delay time > 200 ms A 3TX AN1 1 1 unit Storage devices for shunt trip units ( V AC/ V DC) Rated control supply voltage U s V AC/220 V V DC Storage time 5 min B 3WL BA14-0AA0 1 1 unit ) Except for mounting in the left accessory sub-section of the SENTRON VL0X circuit breakers (3VL1) with RCD module and the SENTRON VL0, VL250 circuit breakers (3VL2, 3VL3) with electronic overcurrent trip units, since this sub-section is occupied by the tripping solenoid. For this application only, a 3SB adapter can be installed in the N pole (for 4-pole circuit breakers only). 2) Shunt trip unit with disconnection contact (3SB3 for ON/OFF position) not isolated (see Technical Information LV 1 T, "Schematics"). 3) In the case of VL400 (3VL4): Unsuitable for mounting in the right-hand accessory sub-section. The 3VL AB00 installation kit with auxiliary switches only is recommended. /40 Siemens LV

41 Siemens AG 2008 up to 00 A Accessories/spare parts Wiring directly at accessories DT For VL630 up to VL00 (3VL5 to 3VL8) Price NSE0_00684 Auxiliary switches and auxiliary trip units 3- or 4-pole For retrofitting (for possible complements, see figure in Technical Information LV 1 T "Design", "Auxiliary Trip Units and Auxiliary Switches") Auxiliary switches (HS) and alarm switches (AS) For retrofitting Kits Mounting side 2 HS (1 NO + 1 NC) N, left, right 4 HS (2 NO + 2 NC) N, left, right A 3VL AC unit HS (1 NC + 1 NO) Left, right + 1 AS (1 NO) (kit) 3VL A.00 Additional auxiliary switch/alarm switch combinations See page /42. Shunt trip units 1) For retrofitting NSE0_00678 V AC V DC Mounting side 1) Shunt trip unit with disconnection contact (3SB3 for ON/OFF position) not isolated (see Technical Information LV 1 T, "Schematics"). Left A 3VL AE unit Right pole only A 3VL SC unit Right pole only A 3VL SJ unit Right pole only A 3VL SK unit Right pole only A 3VL SQ unit Right pole only A 3VL SM unit Right pole only A 3VL SR unit Right pole only A 3VL ST unit Right pole only A 3VL SV unit Undervoltage trip units For retrofitting V AC V DC Mounting side 12 Right pole only A 3VL UN unit Right pole only A 3VL UP unit Right pole only A 3VL UU unit Right pole only A 3VL UV unit Right pole only A 3VL UD unit VL S.00, Right pole only A 3VL UG unit VL U Right pole only A 3VL UR unit Right pole only A 3VL UM unit Right pole only A 3VL UH unit Right pole only A 3VL US unit Right pole only A 3VL UQ unit Right pole only A 3VL UJ unit Right pole only A 3VL UK unit Right pole only A 3VL UL unit Right pole only A 3VL UT unit Time-delay devices for undervoltage trip units ( V DC) Rated control supply voltage U s 220 V V AC/DC Delay time > 200 ms A 3TX AN1 1 1 unit Storage devices for shunt trip units ( V AC/ V DC) Rated control supply voltage U s V AC/220 V V DC Storage time 5 min B 3WL BA14-0AA0 1 1 unit Siemens LV /41

42 up to 00 A Accessories/spare parts Siemens AG 2008 For circuit breakers Maximum combination of auxiliary switches (HS) and alarm switches (AS) Type 3SB adapters and 3SB contact blocks Mounting adapters for auxiliary and alarm switch combinations For installation in the N pole of the circuit breaker 1) Except for mounting in the left accessory sub-section of the SENTRON VL0X (3VL1) circuit breakers with RCD module and SENTRON VL0, VL250 (3VL2 and 3VL3) circuit breakers with solid-state overcurrent trip unit. On the right-hand side it is only possible to install an auxiliary trip unit or an auxiliary/alarm switch combination (see Technical Information LV 1 T "Design", "Auxiliary Trip Units and Auxiliary Switches"). For this application only, a 3SB adapter can be installed in the N pole (for 4-pole circuit breakers only). DT Price VL0X, up to 3 HS 1) A 3VL AH unit VL0, VL250, 2 HS + 1 AS 1)2) VL400 (3VL1 to 3VL4) VL630, VL800, VL1250, VL00 (3VL5 to 3VL8) For installation in the left pole of the circuit breaker up to 4 HS A 3VL9 8-2AL unit HS + 2 AS VL0X, up to 3 HS 1) A 3VL AH unit VL0, VL250, 2 HS + 1 AS 1)2) A 3VL AJ unit VL400 (3VL1 to 3VL4) VL630, VL800, VL1250, VL00 (3VL5 to 3VL8) For installation in the right pole of the circuit breaker up to 4 HS A 3VL9 8-2AL unit HS + 2 AS A 3VL9 8-2AN unit VL0X, up to 3 HS 1) A 3VL AH unit VL0, VL250, 2 HS + 1 AS 1)2) A 3VL AJ unit VL400 (3VL1 to 3VL4) 2) VL630, VL800, VL1250, VL00 (3VL5 to 3VL8) up to 4 HS A 3VL9 8-2AL unit HS + 2 AS 2) In the case of VL400: 3VL AJ20 unsuitable for mounting in the righthand accessory sub-section. For auxiliary/alarm switches DT Circuit breaker Type VL0X to VL00 (3VL1 to 3VL8) Contact blocks for auxiliary and alarm switch combinations Price 1 NO B 3SB J 1 1 unit NC B 3SB K 1 1 unit For auxiliary switch or alarm switch combinations not included in the kits provided as standard, the mounting adapters specified can be ordered separately together with the required contact blocks: 1 HS or 1 AS with NO contact 3SB J 1 HS or 1 AS with NC contact 3SB K Note: A maximum of 6 contact blocks (HS) per circuit breaker (VL0X, VL0, VL250, VL400; 3VL1 to 3VL4) and a maximum of 8 contact blocks (HS) per circuit breaker (VL630, VL800, VL1250, VL00; 3VL5 to 3VL8) are possible. Four 3SB34 auxiliary contact blocks and one mounting adapter (right), suitable for VL630, VL800, VL1250, VL00 (3VL5 to 3VL8) circuit breakers. NSE0_00684 For retrofitting/possible complements, Technical Information LV 1 T "Design", "Auxiliary Trip Units and Auxiliary Switches". /42 Siemens LV

43 Siemens AG 2008 up to 00 A Accessories/spare parts Operating mechanisms NSE0_ VL9.00-3H.00 3VL9.00-3H.04 3VL9.00-3A.10 NSE0_00712 NSE0_00711 Version for auxiliary switches see above For more accessories and components for door-coupling rotary operating mechanisms, see Chapter "Distribution with SIVACON", "Components for 8UC Distribution Systems". For VL0X to VL250 (3VL1 to 3VL3) DT Price 3- or 4-pole Front-operated rotary operating mechanisms 1) For direct mounting on the circuit breaker, without leading auxiliary switch, degree of protection IP30 2), black, max. 3 padlocks A 3VL HA unit EMERGENCY-STOP version Red knob, yellow indicator plate A 3VL HC unit Safety locks for installation by the customer For installation see pages /62 to /67. Door-coupling rotary operating mechanisms, complete 1), installation in doors and covers Degree of protection IP65, including black knob with masking plate, indicator plate, removable door coupling, 300 mm extension shaft and front-operated rotary operating mechanism for the respective circuit breaker, lockable with up to 3 padlocks, with door interlocking A 3VL HF unit EMERGENCY-STOP version, Red knob, yellow indicator plate, without leading auxiliary switch A 3VL HG unit Safety locks for installation by the customer For installation see pages /62 to /67. Leading auxiliary switches for installation in a front-operated rotary operating mechanism or door-coupling rotary operating mechanism Standard or EMERGENCY-STOP version "OFF after ON" Leading auxiliary switches when switching on 1 changeover contact with 1.5 m long cables A 3VL AS unit changeover contacts with 1.5 m long cables A 3VL AT unit "ON after OFF" Leading auxiliary switches when switching off 1 changeover contact with 1.5 m long cables A 3VL AU unit changeover contacts with 1.5 m long cables A 3VL AW unit Side panel rotary operating mechanisms, complete Degree of protection IP65, including black knob with masking plate, indicator plate, Bowden wire, lockable with up to 3 padlocks - with 600 mm Bowden wire A 3VL HR unit with 1000 mm Bowden wire A 3VL HR unit with 1500 mm Bowden wire A 3VL HR unit Side panel rotary operating mechanisms, complete EMERGENCY-STOP version Degree of protection IP65, including red knob with masking plate, yellow indicator plate, Bowden wire, lockable with up to 3 padlocks - with 600 mm Bowden wire A 3VL HR unit with 1000 mm Bowden wire A 3VL HR unit with 1500 mm Bowden wire A 3VL HR unit Bowden wires - with 600 mm length A 3VL HS unit with 1000 mm length A 3VL HS unit with 1500 mm length A 3VL HS unit Retaining brackets A 3VL HP unit Retaining bracket is mounted on the operating mechanism, recommended for extension shafts >250 mm, with locking device for max. 3 padlocks Rotary operating mechanisms with shaft end, A 3VL HE unit without selector switch 1) Without leading auxiliary switch, 1) Not possible on VL0X with RCD module. 2) IP40 with additional masking frame mounted on the door cut-out. Siemens LV /43

44 up to 00 A Accessories/spare parts Siemens AG 2008 Operating mechanisms NSE0_ VL9.00-3H.00 Version For VL400 (3VL4) DT Price 3- or 4-pole Front-operated rotary operating mechanisms For direct mounting on the circuit breaker, without leading auxiliary switch, degree of protection IP30 1), black, max. 3 padlocks A 3VL HA unit EMERGENCY-STOP version Red knob, yellow indicator plate A 3VL HC unit Safety locks for installation by the customer For installation see pages /62 to /67. 3VL9.00-3H.04 3VL9.00-3A.10 NSE0_00712 NSE0_00711 Door-coupling rotary operating mechanisms, complete, installation in doors and covers Degree of protection IP65, including black knob with masking plate, indicator plate, removable door coupling, 300 mm extension shaft and front-operated rotary operating mechanism for the respective circuit breaker, lockable with up to 3 padlocks, with door interlocking A 3VL HF unit EMERGENCY-STOP version, Red knob, yellow indicator plate, without leading auxiliary switch A 3VL HG unit Safety locks for installation by the customer For installation see pages /62 to /67. Leading auxiliary switches for installation in a front-operated rotary operating mechanism or door-coupling rotary operating mechanism Standard or EMERGENCY-STOP version "OFF after ON" Leading auxiliary switches when switching on 1 changeover contact with 1.5 m long cables A 3VL AS unit changeover contacts with 1.5 m long cables A 3VL AT unit "ON after OFF" Leading auxiliary switches when switching off 1 changeover contact with 1.5 m long cables A 3VL AU unit changeover contacts with 1.5 m long cables A 3VL AW unit Rotary operating mechanisms with shaft end, without selector switch Without leading auxiliary switch, for auxiliary switches see above For more accessories and components for door-coupling rotary operating mechanisms, see Chapter "Distribution with SIVACON", "Components for 8UC Distribution Systems". /44 Siemens LV Side panel rotary operating mechanisms, complete Degree of protection IP65, including black knob with masking plate, indicator plate, Bowden wire, lockable with up to 3 padlocks - with 600 mm Bowden wire A 3VL HR unit with 1000 mm Bowden wire A 3VL HR unit with 1500 mm Bowden wire A 3VL HR unit Side panel rotary operating mechanisms, complete EMERGENCY-STOP version Degree of protection IP65, including red knob with masking plate, yellow indicator plate, Bowden wire, lockable with up to 3 padlocks - with 600 mm Bowden wire A 3VL HR unit with 1000 mm Bowden wire A 3VL HR unit with 1500 mm Bowden wire A 3VL HR unit Bowden wires - with 600 mm length A 3VL HS unit with 1000 mm length A 3VL HS unit with 1500 mm length A 3VL HS unit Retaining brackets A 3VL HP unit Retaining bracket is mounted on the operating mechanism, recommended for extension shafts >250 mm, with locking device for max. 3 padlocks A 3VL HE unit ) IP40 with additional masking frame mounted on the door cut-out.

45 Siemens AG 2008 up to 00 A Accessories/spare parts For VL630 (3VL5) DT Price For VL800 (3VL6) DT Price A 3VL HA unit A 3VL HA unit A 3VL HC unit A 3VL HC unit A 3VL HF unit A 3VL HF unit A 3VL HG unit A 3VL HG unit A 3VL AS unit A 3VL AS unit A 3VL AT unit A 3VL AT unit A 3VL AU unit A 3VL AU unit A 3VL AW unit A 3VL AW unit A 3VL HR unit A 3VL HR unit A 3VL HR unit A 3VL HR unit A 3VL HR unit A 3VL HR unit A 3VL HS unit A 3VL HS unit A 3VL HS unit A 3VL HP unit A 3VL HP unit A 3VL HE unit A 3VL HE unit Siemens LV /45

46 up to 00 A Accessories/spare parts Siemens AG 2008 Operating mechanisms 3VL9.00-3M.00 NSE0_007 Version 3- or 4-pole Motorized operating mechanism with spring energy store 1)2) Degree of protection IP30, with locking device for 3 padlocks, suitable for synchronizing AC 50/60 Hz V V DC 1) Not possible on VL0X with RCD module. 2) For safety lock as an installation kit for retrofitting see pages /62 to /67. For VL0X to VL250 (3VL1 to 3VL3) DT Price 24 C 3VL MJ unit C 3VL ML unit C 3VL MS unit C 3VL MN unit C 3VL MQ unit Motorized operating mechanisms 1) Degree of protection IP00, with locking device for 3 padlocks, not suitable for synchronizing AC 50/60 Hz V V DC 24 C 3VL MA unit C 3VL MB unit C 3VL MC unit D 3VL MD unit C 3VL ME unit Toggle handle extensions /46 Siemens LV

47 Siemens AG 2008 up to 00 A Accessories/spare parts For VL400 (3VL4) DT Price For VL630 to VL800 (3VL5 to 3VL6) DT Price C 3VL MJ unit C 3VL MJ unit C 3VL ML unit C 3VL ML unit C 3VL MS unit C 3VL MS unit C 3VL MN unit C 3VL MN unit C 3VL MQ unit C 3VL MQ unit A 3VL HN unit A 3VL HN unit Siemens LV /47

48 up to 00 A Accessories/spare parts Siemens AG 2008 Operating mechanisms NSE0_ VL9.00-3H.00 Version For 1250 to VL00 (3VL7 and 3VL8) DT Price 3- or 4-pole Front-operated rotary operating mechanisms For direct mounting on the circuit breaker, without leading auxiliary switch, degree of protection IP30 1), black, max. 3 padlocks A 3VL HA unit EMERGENCY-STOP version Red knob, yellow indicator plate A 3VL HC unit Safety locks for installation by the customer For installation see pages /62 to /67. 3VL9.00-3H.04 NSE0_00711 Door-coupling rotary operating mechanisms, complete, installation in doors and covers Degree of protection IP65, including black knob with masking plate, indicator plate, removable door coupling, 300 mm extension shaft and front-operated rotary operating mechanism for the respective circuit breaker, lockable with up to 3 padlocks, with door interlocking A 3VL HF unit EMERGENCY-STOP version, Red knob, yellow indicator plate, without leading auxiliary switch A 3VL HG unit Safety locks for installation by the customer For installation see pages /62 to /67. 3VL9.00-3A.10 NSE0_00712 Leading auxiliary switches for installation in a front-operated rotary operating mechanism or door-coupling rotary operating mechanism Standard or EMERGENCY-STOP version "OFF after ON" Leading auxiliary switches when switching on 1 changeover contact with 1.5 m long cables A 3VL AS unit changeover contacts with 1.5 m long cables A 3VL AT unit "ON after OFF" Leading auxiliary switches when switching off 1 changeover contact with 1.5 m long cables A 3VL AU unit changeover contacts with 1.5 m long cables A 3VL AW unit Retaining brackets A 3VL HP unit Retaining bracket is mounted on the operating mechanism, recommended for extension shafts >250 mm, with locking device for max. 3 padlocks NSE0_007 Rotary operating mechanisms with shaft end, A 3VL HE unit without selector switch Without leading auxiliary switch, for auxiliary switches see above Motorized operating mechanisms 2) Degree of protection IP30, with locking device for 3 padlocks, not suitable for synchronizing AC 50/60 Hz V V DC 24 C 3VL MJ unit C 3VL ML unit C 3VL MS unit C 3VL MN unit C 3VL MQ unit VL9.00-3M.00 Toggle handle extensions A 3VL HN unit For more accessories and components for door-coupling rotary operating mechanisms, see Chapter "Distribution with SIVACON", "Components for 8UC Distribution Systems". 1) IP40 with additional masking frame mounted on the door cut-out. 2) For safety lock as an installation kit for retrofitting see pages /62 to /67. /48 Siemens LV

49 Siemens AG 2008 up to 00 A Accessories/spare parts Version Plug-in versions/withdrawable versions 3- or 4-pole Plug-in base installation kits Complete with base plate, base, blade contacts for circuit breakers, terminal covers for degree of protection IP20, fixing screws, trip pin Rear-accessible terminals 1) It is recommended to use a maximum of 2 auxiliary circuit plug-in systems per circuit breaker ( terminals). For VL0X (3VL1) DT Price 3-pole A 3VL PA unit pole with RCD module A 3VL PB unit VL9.00-4PA30 4-pole A 3VL PA unit pole with RCD module A 3VL PB unit VL9.00-4PE30 NSE0_00719 NSE0_ angle connecting adapters For rear connection, 3-pole A 3VL PE unit For rear connection, 4-pole A 3VL PE unit Front-accessible terminals 3-pole A 3VL PC unit pole with RCD module A 3VL PD unit pole A 3VL PC unit pole with RCD module A 3VL PD unit Withdrawable version installation kits Upgrade of the plug-in base installation kit to Withdrawable version 3-pole including side panels 3-pole with RCD and racking mechanism. 4-pole 4-pole with RCD Withdrawable versions Same as plug-in base installation kit, with additional side panels and racking mechanism Rear-accessible terminals 3-pole 3VL9.00-4WF30 3-pole with RCD module 4-pole 4-pole with RCD module NSE0_ VL9.00-4WA30 Front-accessible terminals 3-pole 3-pole with RCD module 4-pole 4-pole with RCD module Blade contacts As replacement for converting fixed-mounted circuit breakers into plug-in/withdrawable circuit breakers, including trip pin 1 set = 6 units 3-pole A 3VL PS unit set = 8 units 4-pole A 3VL PS unit Trip pins and springs As replacement for plug-in/withdrawable circuit breaker Auxiliary circuit plug connections for plug-in bases Accessory connections for plug-in circuit breakers (factory-wired connectors) and for plug-in bases or withdrawable version (coupling with screw terminal) A 3VL PF unit ) 8 terminals A 3VL PJ unit Position indicator switches (connected/disconnected position) For plug-in/withdrawable base, 1 changeover contact, max. 2 signaling switches possible A 3VL WL unit Siemens LV /49

50 up to 00 A Accessories/spare parts Siemens AG 2008 Version Plug-in versions/withdrawable versions 3- or 4-pole Plug-in base installation kits Complete with base plate, base, blade contacts for circuit breakers, terminal covers for degree of protection IP20, fixing screws, trip pin Rear-accessible terminals 1) It is recommended to use a maximum of 2 auxiliary circuit plug-in systems per circuit breaker ( terminals). 2) For 3-pole applications please use 4-pole withdrawable version with 4-pole RCD module and 4-pole circuit breaker. 3) It is recommended to use a maximum of 3 auxiliary circuit plug-in systems per circuit breaker (24 terminals). For VL0 (3VL2) DT Price 3-pole A 3VL PA unit pole with RCD module A 3VL PB unit VL9.00-4PA30 4-pole A 3VL PA unit pole with RCD module A 3VL PB unit VL9.00-4PE30 NSE0_00719 NSE0_ angle connecting adapters For rear connection, 3-pole A 3VL PE unit For rear connection, 4-pole A 3VL PE unit Front-accessible terminals 3-pole A 3VL PC unit pole with RCD module A 3VL PD unit pole A 3VL PC unit pole with RCD module A 3VL PD unit Withdrawable version installation kits Upgrade of the plug-in base installation kit to Withdrawable version 3-pole A 3VL WF unit including side panels 3-pole with RCD A 3VL WG unit and racking mechanism. 4-pole A 3VL WF unit pole with RCD A 3VL WG unit Withdrawable versions Same as plug-in base installation kit, with additional side panels and racking mechanism Rear-accessible terminals 3-pole A 3VL WA unit pole with RCD module A 3VL WB unit VL9.00-4WF30 4-pole A 3VL WA unit pole with RCD module A 3VL WB unit NSE0_ VL9.00-4WA30 Front-accessible terminals 3-pole A 3VL WC unit pole with RCD module A 3VL WD unit pole A 3VL WC unit pole with RCD module A 3VL WD unit Blade contacts As replacement for converting fixed-mounted circuit breakers into plug-in/withdrawable circuit breakers, including trip pin 1 set = 6 units 3-pole A 3VL PS unit set = 8 units 4-pole A 3VL PS unit Trip pins and springs As replacement for plug-in/withdrawable circuit breaker Auxiliary circuit plug connections for plug-in bases Accessory connections for plug-in circuit breakers (factory-wired connectors) and for plug-in bases or withdrawable version (coupling with screw terminal) A 3VL PF unit ) 8 terminals A 3VL PJ unit Position indicator switches (connected/disconnected position) For plug-in/withdrawable base, 1 changeover contact, max. 2 signaling switches possible A 3VL WL unit /50 Siemens LV

51 Siemens AG 2008 up to 00 A Accessories/spare parts For VL250 (3VL3) DT Price For VL400 (3VL4) DT Price A 3VL PA unit A 3VL PA unit A 3VL PB unit ) A 3VL PA unit A 3VL PA unit A 3VL PB unit A 3VL PB unit A 3VL PE unit A 3VL PE unit A 3VL PC unit A 3VL PC unit A 3VL PD unit ) A 3VL PC unit A 3VL PC unit A 3VL PD unit A 3VL PD unit A 3VL WF unit A 3VL WF unit A 3VL WG unit ) A 3VL WF unit A 3VL WF unit A 3VL WG unit A 3VL WG unit A 3VL WA unit A 3VL WA unit A 3VL WB unit ) A 3VL WA unit A 3VL WA unit A 3VL WB unit A 3VL WB unit A 3VL WC unit A 3VL WC unit A 3VL WD unit ) A 3VL WC unit A 3VL WC unit A 3VL WD unit A 3VL WD unit A 3VL PS unit A 3VL PS unit A 3VL PS unit A 3VL PS unit A 3VL PF unit A 3VL PF unit ) 3) A 3VL PJ unit A 3VL PJ unit A 3VL WL unit A 3VL WL unit Siemens LV /51

52 up to 00 A Accessories/spare parts Siemens AG 2008 Version Plug-in versions/withdrawable versions 3- or 4-pole Plug-in base installation kits Complete with base plate, base, blade contacts for circuit breakers, terminal covers for degree of protection IP20, fixing screws, trip pin Rear-accessible terminals 1) With VL800 (3VL6) to VL00 (3VL8) as vertical connection. 2) It is recommended to use a maximum of 3 auxiliary circuit plug-in systems per circuit breaker (24 terminals). For VL630 (3VL5) DT Price 3-pole A 3VL PA unit pole with RCD module 3VL9.00-4PA30 4-pole A 3VL PA unit pole with RCD module 3VL9.00-4PE30 90 angle connecting adapters For rear connection, 3-pole For rear connection, 4-pole Front-accessible terminals 3-pole A 3VL PC unit pole with RCD module 4-pole A 3VL PC unit pole with RCD module Withdrawable version installation kits Upgrade of the plug-in base installation kit to Withdrawable version 3-pole A 3VL WF unit including side panels 3-pole with RCD and racking mechanism. 4-pole A 3VL WF unit pole with RCD Withdrawable versions Same as plug-in base installation kit, with additional side panels and racking mechanism Rear-accessible terminals 1) 3-pole A 3VL WA unit VL9.00-4WF30 3-pole with RCD module 4-pole A 3VL WA unit pole with RCD module NSE0_00719 NSE0_00717 NSE0_ VL9.00-4WA30 Front-accessible terminals 3-pole A 3VL WC unit pole with RCD module 4-pole A 3VL WC unit pole with RCD module Blade contacts As replacement for converting fixed-mounted circuit breakers into plug-in/withdrawable circuit breakers, including trip pin 1 set = 6 units 3-pole A 3VL PS unit set = 8 units 4-pole A 3VL PS unit Trip pins and springs As replacement for plug-in/withdrawable circuit breaker Auxiliary circuit plug connections for plug-in bases Accessory connections for plug-in circuit breakers (factory-wired connectors) and for plug-in bases or withdrawable version (coupling with screw terminal) A 3VL PF unit ) 8 terminals A 3VL PJ unit Position indicator switches (connected/disconnected position) For plug-in/withdrawable base, 1 changeover contact, max. 2 signaling switches possible A 3VL WL unit /52 Siemens LV

53 Siemens AG 2008 up to 00 A Accessories/spare parts For VL800 (3VL6) DT Price For VL1250 (3VL7) DT Price A 3VL WA unit A 3VL WA unit A 3VL WA unit A 3VL WA unit A 3VL WC unit A 3VL WC unit A 3VL WC unit A 3VL WC unit A 3VL PS unit A 3VL PS unit A 3VL PS unit A 3VL PS unit A 3VL PF unit A 3VL PF unit ) 2) A 3VL PJ unit A 3VL PJ unit A 3VL WL unit A 3VL WL unit Siemens LV /53

54 up to 00 A Accessories/spare parts Siemens AG 2008 Version Plug-in versions/withdrawable versions 3- or 4-pole Plug-in base installation kits Complete with base plate, base, blade contacts for circuit breakers, terminal covers for degree of protection IP20, fixing screws, trip pin Rear-accessible terminals 3-pole 3-pole with RCD module 3VL9.00-4PA30 4-pole 4-pole with RCD module 3VL9.00-4PE30 90 angle connecting adapters For rear connection, 3-pole For rear connection, 4-pole Front-accessible terminals 3-pole 3-pole with RCD module 4-pole 4-pole with RCD module Withdrawable version installation kits Upgrade of the plug-in base installation kit to Withdrawable version 3-pole including side panels 3-pole with RCD and racking mechanism. 4-pole 4-pole with RCD 1) With VL800 (3VL6) to VL00 (3VL8) as vertical connection. 2) It is recommended to use a maximum of 3 auxiliary circuit plug-in systems per circuit breaker (24 terminals). For VL00 (3VL8) DT Price Withdrawable versions Same as plug-in base installation kit, with additional side panels and racking mechanism Rear-accessible terminals 1) 3-pole A 3VL WA unit VL9.00-4WF30 3-pole with RCD module 4-pole A 3VL WA unit pole with RCD module NSE0_00719 NSE0_00717 NSE0_ VL9.00-4WA30 Front-accessible terminals 3-pole A 3VL WC unit pole with RCD module 4-pole A 3VL WC unit pole with RCD module Blade contacts As replacement for converting fixed-mounted circuit breakers into plug-in/withdrawable circuit breakers, including trip pin 1 set = 6 units 3-pole A 3VL PS unit set = 8 units 4-pole A 3VL PS unit Trip pins and springs As replacement for plug-in/withdrawable circuit breaker Auxiliary circuit plug connections for plug-in bases Accessory connections for plug-in circuit breakers (factory-wired connectors) and for plug-in bases or withdrawable version (coupling with screw terminal) A 3VL PF unit ) 8 terminals A 3VL PJ unit Position indicator switches (connected/disconnected position) For plug-in/withdrawable base, 1 changeover contact, max. 2 signaling switches possible A 3VL WL unit /54 Siemens LV

55 Siemens AG 2008 up to 00 A Accessories/spare parts Circuit breakers for system protection, only for TM, starters, disconnectors Rated Residual current I n currents I adjustable Delay time t d adjustable Rated operational voltage U e DT Price A A s V AC RCD modules 3-pole VL0X (3VL1) 0.03 Instantaneous Bottom mounting 1)3) A 3VL GA unit Mounting kit for left side, 0.10 A 3VL GB unit without RCD 1)2)3) VL0 (3VL2) A 3VL9 2-5GC unit A 3VL9 2-5GD unit VL250 (3VL3) A 3VL GE unit VL400 (3VL4) pole VL0X (3VL1) 0.03 Instantaneous A 3VL GF unit Bottom mounting 1)3) A 3VL GA unit Mounting kit for left side, 0.10 A 3VL GB unit without RCD 1)2)3) VL0 (3VL2) A 3VL9 2-5GC unit A 3VL9 2-5GD unit VL250 (3VL3) A 3VL GE unit A 3VL GF unit VL400 (3VL4) A 3VL GG unit A 3VL GH unit Circuit breakers for system protection, only for TM, starters, disconnectors SENTRON VL0X with RCD module Mounted laterally on the circuit breaker (on left side) NSE0_00582 Rated Residual current I n currents I adjustable Delay time t d adjustable SENTRON VL0X to VL400 with RCD module Mounted below the circuit breaker Rated operational voltage U e 3-pole circuit breaker with " Z" 3VL D Z and additional order code Additional price 4-pole circuit breaker with " Z" 3VL E Z and additional order code Additional price NSE0_00583 A A s V AC Circuit breakers with RCD module 3- and 4-pole VL0X (3VL1) @ Code for further @ Code for further versions Z (Bottom mounting) A 0 1 1)3) x A 0 1 1)3) x VL0 (3VL2) A 0 1 x A 0 1 x A 0 2 x A 0 2 x VL250 (3VL3) A 0 1 x A 0 1 x A 0 2 x A 0 2 x VL400 (3VL4) A 0 1 x x = Additional price 1) Only the right-hand accessory subsection and the N conductor (4-pole) accessory sub-section can be used for the installation of accessories, see Technical Information LV 1 T "Design", "Auxiliary Trip Units and Auxiliary Switches". 2) The installation kit consists of the mounting plate, wiring and covers for circuit breakers and RCD module (for 75 mm standard mounting rail). The RCD module (3VL GA30/-5GA40) must be ordered separately A 0 2 x 3) VL0X (3VL1) + RCD module cannot be combined with motorized operating mechanism, front operating mechanism, door-coupling rotary operating mechanism, locking device for toggle levers and screw terminal connections (3VL ). Siemens LV /55

56 up to 00 A Accessories/spare parts Siemens AG 2008 Version Connection parts for fixed-mounted circuit breakers 3- or 4-pole Front connecting bars 1) Phase barriers included. NSE0_ VL9.00-4EC40 NSE0_ VL9.00-4ED40 3VL9.00-4RA00, 3VL9.00-4RB00 3VL9.00-4RK00, 3VL9.00-4RL00 NSE0_ VL9.00-4RG00 NSE0_ LV9.00-4TC # ' 3VL9.00-4TD.0 NSE0_ VL9.00-4TA.0 NSE0_ VL9.00-3CA.0 NSE0_ VL9.00-3CB.0 NSE0_00731 NSE0_00723 NSE0_ VL9.00-8CE00 Standard 1) Screw terminal connections are required for SENTRON VL0X and VL0 (3VL1 and 3VL2) circuit breakers, see Technical Information LV 1 T, For VL0X (3VL1) DT Price 1 set = 3 units 3-pole A 3VL9 2-4EC unit set = 4 units 4-pole A 3VL9 2-4EC unit For increased pole spacing 1 set = 3 units 3-pole A 3VL9 2-4ED unit set = 4 units 4-pole A 3VL9 2-4ED unit Rear-mounting terminals Short terminal (1 unit) A 3VL RA unit Long terminal (1 unit) A 3VL RB unit Terminal kit (2 short + 1 long) 3-pole A 3VL RC unit Terminal kit (2 short + 2 long) 4-pole A 3VL RF unit Short flat connector (1 unit) A 3VL RK unit Long flat connector (1 unit) A 3VL RL unit Flat connector kit (2 short + 1 long) 3-pole A 3VL RM unit Flat connector kit (2 short + 2 long) 4-pole A 3VL RN unit Flat connecting bar (1 unit) Flat connecting bar Set = 3 units, 3-pole Flat connecting bar Set = 4 units, 4-pole Box terminals Connection for flexible flat copper busbar or cable, see Technical Information LV 1 T "Design", "Main Circuit Connections, Basic Equipment and Options". 1 set = 3 units A 3VL TC unit set = 4 units A 3VL TC unit Circular conductor terminals Only for cables (Al or Cu) Aluminum terminal (tinned) 1 set = 3 units A 3VL TD unit set = 4 units A 3VL TD unit Auxiliary conductor terminals A 3VL TN unit For box terminals/aluminum terminals 1 set = 10 units Terminals with screw connection - metric thread With insulator (for rear) for use with busbars and cable lugs, see Technical Information LV 1 T, "Design", "Main Circuit Connections, Basic Equipment and Options". 1 set = 3 units A 3VL TA unit set = 4 units A 3VL TA unit Connection covers (terminal covers) for circuit breakers Degree of protection IP30 for main circuit connections 1 set = 2 units Extended 3-pole A 3VL CA unit Standard 3-pole A 3VL CB unit Extended 4-pole A 3VL CA unit Standard 4-pole A 3VL CB unit Phase barriers for circuit breakers, fixed-mounted, plug-in or withdrawable versions 1 set = 2 units A 3VL CE unit "Design", "Main Circuit Connections, Basic Equipment and Options". /56 Siemens LV

57 Siemens AG 2008 up to 00 A Accessories/spare parts For VL0 (3VL2) DT Price For VL250 (3VL3) DT Price A 3VL EC unit A 3VL EC unit A 3VL EC unit A 3VL EC unit A 3VL ED unit A 3VL ED unit A 3VL ED unit A 3VL ED unit A 3VL RA unit A 3VL RA unit A 3VL RB unit A 3VL RB unit A 3VL RC unit A 3VL RC unit A 3VL RF unit A 3VL RF unit A 3VL RK unit A 3VL RK unit A 3VL RL unit A 3VL RL unit A 3VL RM unit A 3VL RM unit A 3VL RN unit A 3VL RN unit A 3VL TC unit A 3VL TC unit A 3VL TC unit A 3VL TC unit A 3VL TD unit A 3VL TD unit A 3VL TD unit A 3VL TD unit A 3VL TN unit A 3VL TN unit A 3VL TA unit A 3VL TA unit A 3VL TA unit A 3VL TA unit A 3VL CA unit A 3VL CA unit A 3VL CB unit A 3VL CB unit A 3VL CA unit A 3VL CA unit A 3VL CB unit A 3VL CB unit A 3VL CE unit A 3VL CE unit Siemens LV /57

58 up to 00 A Accessories/spare parts Siemens AG 2008 Version Connection parts for fixed-mounted circuit breakers 3- or 4-pole NSE0_ VL9.00-4EC40 NSE0_ VL9.00-4ED40 NSE0_ VL9.00-4RA00, 3VL9.00-4RB00 NSE0_ VL9.00-4RK00, 3VL9.00-4RL00 NSE0_ VL9.00-4RG00 NSE0_ VL9.00-4TC # ' 3VL9.00-4TD # " 3VL9.00-4TF #! 3VL9.00-4TT.0 NSE0_ # "! 3VL9.00-4TA.0 NSE0_ VL9.00-3CA.0 NSE0_ VL9.00-3CB.0 NSE0_ VL9.00-8CE00 Front connecting bars Phase barriers included. Standard 1) Front connecting bars included in scope of supply; not for 690 V AC/600 V DC. For VL400 (3VL4) DT Price 1 set = 3 units 3-pole A 3VL EC unit set = 4 units 4-pole A 3VL EC unit For increased pole spacing 1 set = 3 units 3-pole A 3VL ED unit set = 4 units 4-pole A 3VL ED unit Rear-mounting terminals Short terminal (1 unit) A 3VL RA unit Long terminal (1 unit) A 3VL RB unit Terminal kit (2 short + 1 long) 3-pole A 3VL RC unit Terminal kit (2 short + 2 long) 4-pole A 3VL RF unit Short flat connector (1 unit) A 3VL RK unit Long flat connector (1 unit) A 3VL RL unit Flat connector kit (2 short + 1 long) 3-pole A 3VL RM unit Flat connector kit (2 short + 2 long) 4-pole A 3VL RN unit Flat connecting bar (1 unit) Flat connecting bar Set = 3 units, 3-pole Flat connecting bar Set = 4 units, 4-pole Box terminals Connection for flexible flat copper busbar or cable, see Technical Information LV 1 T "Design", "Main Circuit Connections, Basic Equipment and Options". 1 set = 3 units A 3VL TC unit set = 4 units A 3VL TC unit Circular conductor terminals Only for cables (Al or Cu) Aluminum terminal (tinned) 1 set = 3 units A 3VL TD unit set = 4 units A 3VL TD unit Auxiliary conductor terminals For box terminals/aluminum terminals 1 set = 10 units Multiple feed-in terminals A 3VL TN unit units A 3VL TF unit units A 3VL TF unit Connecting terminal plates 1) Connection for flexible flat copper busbar with auxiliary conductor connection mm 2 (extended terminal covers or phase barriers required) 1 set = 3 units 1 set = 4 units Terminals with screw connection - metric thread With insulator (for rear) for use with busbars and cable lugs, see Technical Information LV 1 T, "Design", "Main Circuit Connections, Basic Equipment and Options". 1 set = 3 units A 3VL TA unit set = 4 units A 3VL TA unit Connection covers (terminal covers) for circuit breakers Degree of protection IP30 for main circuit connections 1 set = 2 units Extended 3-pole A 3VL CA unit Standard 3-pole A 3VL CB unit Extended 4-pole A 3VL CA unit Standard 4-pole A 3VL CB unit Phase barriers for circuit breakers fixed-mounting, plug-in or withdrawable versions 2) 1 set = 2 units A 3VL CE unit /58 Siemens LV

59 Siemens AG 2008 up to 00 A Accessories/spare parts For VL630 (3VL5) DT Price For VL800 (3VL6) DT Price A 3VL EC unit A 3VL EC unit A 3VL EC unit A 3VL EC unit A 3VL ED unit A 3VL ED unit A 3VL ED unit A 3VL ED unit A 3VL RG unit A 3VL RG unit A 3VL RH unit A 3VL RH unit A 3VL RH unit A 3VL RH unit A 3VL TN unit A 3VL TN unit A 3VL TG unit A 3VL TG unit A 3VL TG unit A 3VL TG unit A 3VL TT unit A 3VL TT unit A 3VL TA unit A 3VL TA unit A 3VL TA unit A 3VL TA unit A 3VL CA unit A 3VL CA unit A 3VL CB unit A 3VL CB unit A 3VL CA unit A 3VL CA unit A 3VL CB unit A 3VL CB unit A 3VL CE unit A 3VL CE unit ) Withdrawable version: Not for VL800 (3VL6). Siemens LV /59

60 up to 00 A Accessories/spare parts Siemens AG 2008 Version Connection parts for fixed-mounted circuit breakers 3- or 4-pole NSE0_ VL9.00-4EC40 NSE0_ VL9.00-4ED40 NSE0_ VL9.00-4RA00, 3VL9.00-4RB00 NSE0_ VL9.00-4RK00, 3VL9.00-4RL00 NSE0_ VL9.00-4RG00 NSE0_ VL9.00-4TC # " " 3VL9.00-4TG.0 NSE0_ VL9.00-4TA.0 NSE0_ VL9.00-3CA.0 NSE0_ VL9.00-3CB.0 NSE0_ VL9.00-8CE00 1) In scope of supply of circuit breaker. Front connecting bars Phase barriers included. Standard For VL1250 (3VL7) DT Price 1 set = 3 units 3-pole A 3VL EC unit set = 4 units 4-pole A 3VL EC unit For increased pole spacing 1 set = 3 units 3-pole 1 set = 4 units 4-pole Rear-mounting terminals Short terminal (1 unit) Long terminal (1 unit) Terminal kit (2 short + 1 long) 3-pole Terminal kit (2 short + 2 long) 4-pole Short flat connector (1 unit) Long flat connector (1 unit) Flat connector kit (2 short + 1 long) 3-pole Flat connector kit (2 short + 2 long) 4-pole Flat connecting bar (1 unit) A 3VL RG unit Flat connecting bar Set = 3 units, 3-pole A 3VL RH unit Flat connecting bar Set = 4 units, 4-pole A 3VL RH unit Box terminals Connection for flexible flat copper busbar or cable, see Technical Information LV 1 T "Design", "Main Circuit Connections, Basic Equipment and Options". 1 set = 3 units 1 set = 4 units Auxiliary conductor terminals For box terminals/aluminum terminals Multiple feed-in terminals Only for cables (Al or Cu) Aluminum terminal (tinned) A 3VL TN unit set = 3 units A 3VL TG unit set = 4 units A 3VL TG unit Terminals with screw connection - metric thread With insulator (for rear) for use with busbars and cable lugs, see Technical Information LV 1 T, "Design", "Main Circuit Connections, Basic Equipment and Options". 1 set = 3 units A 3VL TA unit set = 4 units A 3VL TA unit Connection covers (terminal covers) for circuit breakers Degree of protection IP30 for main circuit connections 1 set = 2 units Extended 3-pole A 3VL CA unit Standard 3-pole A 3VL CB unit Extended 4-pole A 3VL CA unit Standard 4-pole A 3VL CB unit Phase barriers for fixed-mounted circuit breakers 1 set = 2 units A 3VL CE unit /60 Siemens LV

61 Siemens AG 2008 up to 00 A Accessories/spare parts For VL00 (3VL8) DT Price A 3VL EC unit ) A 3VL EC unit ) A 3VL RG unit A 3VL RH unit A 3VL RH unit A 3VL TA unit A 3VL TA unit A 3VL CA unit A 3VL CB unit A 3VL CA unit A 3VL CB unit A 3VL CE unit Siemens LV /61

62 up to 00 A Accessories/spare parts Siemens AG 2008 Version For VL0X (3VL1) DT Price Interlocks NSE0_ VL9.00-3HL00 3- or 4-pole Locking devices for toggle levers For locking the circuit breaker in the "OFF" position. Up to 3 padlocks with Ø 5 8 mm can be used. Removable (padlocks not included) A 3VL HL unit Rear interlocking modules For the mechanical interlocking of two adjacent circuit breakers. The circuit breakers must be of the same installation type and size. (Mounting plate not included in scope of supply) Fixed-mounted circuit breakers A 3VL LC unit Plug-in/withdrawable circuit breakers A 3VL LD unit NSE0_ VL9.00-8L.00 Interlocking modules for Bowden wire interlocking 1) For the mechanical interlocking of two circuit breakers. Interlocking module for one circuit breaker Combination with next size up possible (see ) A 3VL LA unit NSE0_ VL9.00-8LA00 NSE0_ VL9...-8HA00 3VL AK00 Bowden wires for Bowden wire interlocking 1) Wire length 0.5 m A 3VL LH unit Wire length 1.0 m A 3VL LH unit Wire length 1.5 m A 3VL LH unit Safety lock installation kits Key can be removed with the circuit breaker in the "OFF" position For front-operated rotary operating mechanisms Lock types Ronis A 3VL HA unit For motorized operating mechanism with spring energy store Lock types Ronis Filli Giussani A 3VL HA unit Sets of fixing screws (metric thread) including the screws, washers and nuts required to secure a 3- or 4-pole circuit breaker to a prepared surface Set with 4 screws A 3VL SA unit Transparent covers for trip units, sealable to prevent access by unqualified personnel and unauthorized changes to settings (seal not included) Solid-state overcurrent trip unit Thermal-magnetic A 3VL BM unit Function testers for electronic trip units For ETU/LCD ETU trip unit Universal power supplies for function testers (AC 50/60 Hz V) Adapter unit required if the battery power for the function tester is not used Battery power supplies For activating/parameterizing the LCD ETU trip unit (two 9 V blocks are required in addition) NSE0_01531a 3VL AP00 1) Two interlocking modules and one Bowden wire are required. Cannot be used in conjunction with motorized operating mechanism. /62 Siemens LV

63 Siemens AG 2008 up to 00 A Accessories/spare parts For VL0 (3VL2) DT Price For VL250 (3VL3) DT Price A 3VL HL unit A 3VL HL unit A 3VL LC unit A 3VL LC unit A 3VL LD unit A 3VL LD unit Combinations of next size up/down possible (see ) A 3VL LA unit A 3VL LA unit A 3VL LH unit A 3VL LH unit A 3VL LH unit A 3VL LH unit A 3VL LH unit A 3VL LH unit A 3VL HA unit A 3VL HA unit A 3VL HA unit A 3VL HA unit A 3VL SA unit A 3VL SA unit A 3VL BL unit A 3VL BL unit A 3VL BM unit A 3VL BM unit B 3VL AK unit B 3VL AK unit B 3VL AL unit B 3VL AL unit A 3VL AP unit A 3VL AP unit Siemens LV /63

64 up to 00 A Accessories/spare parts Siemens AG 2008 Version For VL400 (3VL4) DT Price Interlocks NSE0_ VL9.00-3HL00 3- or 4-pole Locking devices for toggle levers For locking the circuit breaker in the "OFF" position. Up to 3 padlocks with Ø 5 8 mm can be used. Removable (padlocks not included) A 3VL HL unit Rear interlocking modules For the mechanical interlocking of two adjacent circuit breakers. The circuit breakers must be of the same installation type and size. (Mounting plate not included in scope of supply) Fixed-mounted circuit breakers A 3VL LC unit Plug-in/withdrawable circuit breakers A 3VL LD unit NSE0_ VL9.00-8L.00 Interlocking modules for Bowden wire interlocking 1) For the mechanical interlocking of two circuit breakers. Interlocking module for one circuit breaker A 3VL LA unit NSE0_ VL9.00-8LA00 NSE0_ VL9...-8HA00 3VL AK00 Bowden wires for Bowden wire interlocking 1) Wire length 0.5 m Wire length 1.0 m A 3VL LH unit Wire length 1.5 m A 3VL LH unit Safety lock installation kits Key can be removed with the circuit breaker in the "OFF" position For front-operated rotary operating mechanisms Lock types Ronis A 3VL HA unit For motorized operating mechanism with spring energy store Lock types Ronis A 3VL HA unit Filli Giussani Sets of fixing screws (metric thread) Including the screws, washers and nuts required to secure a 3- or 4-pole circuit breaker to a prepared surface Set with 4 screws A 3VL SA unit Transparent covers for trip units, sealable To prevent access by unqualified personnel and unauthorized changes to settings (seal not included) Solid-state overcurrent trip unit A 3VL BL unit Thermal-magnetic A 3VL BM unit Function testers for electronic trip units For ETU/LCD ETU trip unit B 3VL AK unit Universal power supplies for function testers (AC 50/60 Hz V) Adapter unit required if the battery power for the function tester is not used B 3VL AL unit Battery power supplies For activating/parameterizing the LCD ETU trip unit (two 9 V blocks are required in addition) A 3VL AP unit NSE0_01531a 3VL AP00 1) Two interlocking modules and one Bowden wire are required. Cannot be used in conjunction with motorized operating mechanism. /64 Siemens LV

65 Siemens AG 2008 up to 00 A Accessories/spare parts For VL630 (3VL5) DT Price For VL800 (3VL6) DT Price A 3VL HL unit A 3VL HL unit A 3VL LC unit A 3VL LC unit A 3VL LD unit A 3VL LD unit Combinations of next size up/down possible (see ) A 3VL LA unit A 3VL LA unit A 3VL LH unit A 3VL LH unit A 3VL LH unit A 3VL LH unit A 3VL HA unit A 3VL HA unit A 3VL HA unit A 3VL HA unit A 3VL SA unit A 3VL SA unit A 3VL BL unit A 3VL BL unit A 3VL BM unit B 3VL AK unit B 3VL AK unit B 3VL AL unit B 3VL AL unit A 3VL AP unit A 3VL AP unit Siemens LV /65

66 up to 00 A Accessories/spare parts Siemens AG 2008 Version For VL1250 (3VL7) DT Price Interlocks NSE0_ VL9.00-3HL00 3- or 4-pole Locking devices for toggle levers For locking the circuit breaker in the "OFF" position. Up to 3 padlocks with Ø 5 8 mm can be used. Removable (padlocks not included) A 3VL HL unit Rear interlocking modules For the mechanical interlocking of two adjacent circuit breakers. The circuit breakers must be of the same installation type and size. Fixed-mounted circuit breakers A 3VL LC unit Plug-in/withdrawable circuit breakers A 3VL LD unit NSE0_ VL9.00-8L.00 Interlocking modules for Bowden wire interlocking 1) For the mechanical interlocking of two circuit breakers. Interlocking module for one circuit breaker A 3VL LA unit NSE0_ VL9.00-8LA00 NSE0_ VL9...-8HA00 3VL AK00 Bowden wires for Bowden wire interlocking 1) Wire length 0.5 m Wire length 1.0 m Wire length 1.5 m A 3VL LH unit Safety lock installation kits Key can be removed with the circuit breaker in the "OFF" position For front-operated rotary operating mechanisms Lock types Ronis A 3VL HA unit For motorized operating mechanisms Lock types Ronis A 3VL HA unit Filli Giussani Sets of fixing screws (metric thread) Including the screws, washers and nuts required to secure a 3- or 4-pole circuit breaker to a prepared surface Set with 4 screws A 3VL SA unit Transparent covers for trip units, sealable To prevent access by unqualified personnel and unauthorized changes to settings (seal not included) Solid-state overcurrent trip unit A 3VL BL unit Thermal-magnetic Function testers for electronic trip units For ETU/LCD ETU trip unit B 3VL AK unit Universal power supplies for function testers (AC 50/60 Hz V) Adapter unit required if the battery power for the function tester is not used B 3VL AL unit NSE0_01531a Battery power supplies For activating/parameterizing the LCD ETU trip unit (two 9 V blocks are required in addition) A 3VL AP unit VL AP00 1) Two interlocking modules and one Bowden wire are required. Cannot be used in conjunction with motorized operating mechanism. /66 Siemens LV

67 Siemens AG 2008 up to 00 A Accessories/spare parts For VL00 (3VL8) DT Price A 3VL HL unit A 3VL LC unit A 3VL LD unit A 3VL LA unit A 3VL LH unit A 3VL HA unit A 3VL HA unit A 3VL SA unit A 3VL BL unit B 3VL AK unit B 3VL AL unit A 3VL AP unit Siemens LV /67

68 up to 00 A Accessories/spare parts Siemens AG 2008 Busbar adapter systems with 40 mm or 60 mm busbar center-to-center clearance with components for busbar runs, adapters and switching device holders for individual equipment possibilities, devices with an integrated adapter, as well as accessories and flat copper profile. Observe the short-circuit strength of the busbar system. Short-circuit strength greater than 50 on request. See also "SIVACON Power Distribution Boards, Busway and Cubicle Systems", "Components for 8US Distribution Systems". Version DT Price 40 mm busbar adapter systems According to DIN Part 2 for copper busbars with sharp (DIN 1759) and with rounded (DIN 46433) edges, width 12 mm and 15 mm, thickness 5 mm and 10 mm. Up to 0 A Busbar adapters, length 175 mm with plug connection tags at top, 3-pole with terminal cover (degree of protection IP10) 1) For one VL0X (3VL1) circuit breaker 108 mm wide A 8US SL unit ) For degree of protection IP30, the terminal covers on pages /56 to /59 should be ordered. /68 Siemens LV