Tel: Fax: Web:

Transcription

1 DMW PAGED 25/10/07 12:28 Page 1 A5 B5000 A4091 A LICHFIELD ST B5440 Fazeley 5404 Two Gates Ninian Way B5080 Claymore Brent A4091 NINIAN WAY 5404 A5 M42 M42 J10 M42 DIRECTIONS - At the end of the M40 follow signs to airport M42 north. - Exit M42 at J10. TAMWORTH. - Take first exit off roundabout towards Tamworth onto dual carriageway. - Continue on dual carriageway to second exit - signposted Wilnecote, Tame Valley Ind Estate. - At roundabout take 1st exit. - Follow this road for approx 1 mile until you reach second roundabout. - Take 2nd turning - Ninian Way. - Take 2nd turning on your right - Brent. - When the road bends to the left take the turning on your right. - Carry on towards the dead end turn left here. - Design Metal Work Ltd is on the left. ALUMINIUM EXTRUSIONS CNC TURRET PUNCHING CNC PRESSBRAKING STRUCTURAL WELDING Units 3 & 4, Roman Park, Off Claymore Road, Tame Valley Ind Estate, Wilnecote, Tamworth, Staffs. B77 5DQ. Tel: sales@designmetalwork.co.uk BULKHEADS LIGHT TROUGHS ALUMINIUM EXTRUSIONS CNC TURRET PUNCHING CNC PRESSBRAKING STRUCTURAL WELDING BULKHEADS LIGHT TROUGHS ARCHITECTURAL SHEET METAL WORK

2 DMW PAGED 25/10/07 12:28 Page 2 1 ABOUT US DESIGN METAL WORK Design Metal Work Ltd (formally known as Ali-Fab) was established in 1994 by Alan and Darren Woollard who, between them, can call on over fifty years experience in the suspended ceiling industry. They both previously worked for Trueline Ceiling Products Ltd (now S.A.S. International) and Perfonit and were crucially involved in the development and production of mineral-fibre ceiling tiles, acoustic pads, Open cell and AL-Grid. In the short time since its inception Design Metal Work Ltd. has grown and progressed from satisfying the needs of the ceiling trade to its present position of supplying major development contracts. These contracts include Cribbs Causeway Shopping Mall in Bristol, Ashford Euro-Tunnel Terminal and the new Vodafone H.Q. in Newbury. More recent major contracts include the Welsh Assembly in Cardiff and Terminal 5 at Heathrow. Research and development, coupled with investment and commitment, is constantly undertaken to improve and enhance our services thus enabling us to accommodate the various and flexible requirements of the industry and our customers. Design Metal Work Ltd. is ISO 9001 registered and practice the belief that working closely with our customers we can provide the appropriate advice, support and knowledge resulting in the right product at the right time to the correct specification. While Design Metal Work Ltd uses reasonable efforts to include accurate and up-to-date information in this brochure, Design Metal Work Ltd makes no warranties or representations as to the accuracy of the information. Design Metal Work Ltd assumes no liability or responsibility for any errors or omissions in the content of this brochure. In particular, Design Metal Work Ltd will not be liable for the accuracy, completeness, adequacy, timeliness, or comprehensiveness of the information contained on the brochure. Thank you to: ASTEC PROJECTS LTD for the use of images used within this brochure. 14

3 DMW PAGED 25/10/07 12:28 Page 3 13 Design Metal Work Ltd manufacture and supply a wide range of fire rated and non-fire rated access panels at a competitive price. Our Aluminium and Zintec access panels are manufactured from sheet, punched and folded on site enabling us to respond to your needs quickly and efficiently. All our panels are supplied with budget lock & key, painted Ral 9010 as standard. Panels can be supplied with either a picture frame or plasterboard edge for a tape & joint finish. Bespoke access panels in both size and colour are available on request. C.N.C PUNCHING Our CNC Trumatic 1 Rotation Punch has the capability of punching up to: 5mm in Aluminium, 2mm in Stainless Steel 3mm in Zintec / Galvanised / Mild Steel 2mm Brass / Copper C.N.C PUNCHING This machine holds up to 11 tools at a time and all are 360 degrees rotational. This provides a fast and cost affective way of producing blanks. Our fully trained staff can program the punch via computer from your drawings / DFX files for one-off prototype work or full production runs. C.N.C PUNCHING C.N.C PUNCHING EXTRUSIONS OTHERS

4 DMW PAGED 25/10/07 12:28 Page 4 3 PLASTERBOARD & REVEAL TRIMS PLASTERBOARD TRIMS We stock a wide range of Aluminium extrusions, but also offer manufactured Aluminium, Stainless Steel and pressed Zintec sections to your design for use with all types of suspended ceilings. Our range includes, Corner Profiles, Reveal Trims, Edge Trims, Skirting Trims, Ceiling Shadowgap Junction Trims. Extrusions Supplied at 3000mm Pressed Sections 2500 / 3000mm Our range of trims will provide quality solutions to your ceiling construction. All supplied powder coated or mill finish DMW-RA9 DMW-RA12 DMW-RA15 DMW-RA DMW-RSG12.5 DMW-RSG15 DMW-RSG DMW-RSG DMW-RTH12.5 DMW-JA15 DMW-J15 OTHER SECTIONS AVAILABLE ON REQUEST 15 12C.N.C PUNCHING ARCHITECTURAL BRACKETRY EXTRUSIONS FABRICATION

5 DMW PAGED 25/10/07 12:28 Page 5 11 CEILING TRIMS We stock a wide range of Aluminium extrusions, but also offer Aluminium, Stainless Steel and pressed Zintec sections manufactured to your design for use with all types of suspended ceilings. Our range includes, Perimeter Trims, Upstand Trims, Shadowgap Trims, Bulkheads and Support Trims. Extrusions Supplied at 3000mm Pressed Sections 2500 / 3000mm Suitable for use with ceiling applications including commercial offices, corporate buildings, retail outlets, banks, shopping centres, airports, radiography rooms and other non magnetic installations. Our range of trims will provide quality solutions to your ceiling construction. All supplied powder coated or mill finish. CEILING TRIMS DMW- CT15 DMW- CTH DMW- CT DMW- SG15 38 DMW- CT 25 DMW- T25 DMW- SG 37 DMW- T37 DMW- SGC OTHER SECTIONS AVAILABLE ON REQUEST Our Amada CNC Press brake has the capability of pressing lengths up to 3000mm in thickness of: 6mm in Aluminium, 4mm in Stainless Steel 5mm in Zintec / Galvanised / Mild Steel This 4 Axis fully CNC machine with computer graphics allows our fully trained staff to program one off prototypes or full production runs quickly and efficiently. With CNC punched blanks from our Traumatic 1 Rotation we can offer the full package: Punched Pressed Welded / Fabricated All in-house thus keeping your costs to a minimum. 4 ARCHITECTURAL BRACKETRY FABRICATION EXTRUSIONS

6 DMW PAGED 25/10/07 12:28 Page 6 ARCHITECTURAL METAL WORK 5 Cribbs Causeway Shopping Mall in Bristol 1 0C.N.C PUNCHING FABRICATION WORK 1 2 Gresham Street, London FA B R I C AT I O N W O R K Design Metal Work Ltd offer our customers a complete fabrication production facility including CNC Punching, Folding, Guillotining, Milling, Rolling, Specialist welding in Aluminium, Stainless Steel, Mild Steel, Zintec. With our vast experience in interior and exterior metal work we can put our hand to most of your fabrication needs Hanging baskets. Vehicle modifications. Gates and Fences. Clothes rails. Golf trolley ramps. These are some of the more unusual projects of fabrication that we have been involved in. ARCHITECTURAL BRACKETRY FABRICATION EXTRUSIONS

7 DMW PAGED 25/10/07 12:28 Page 7 6 ARCHITECTURAL METAL WORK Our range of Zintec Steel Splice Plates are available for use with most of our trims. Splice plates facilitate accurate alignment from one section to another. BRACKETRY 9 B R A C K E T RY By using our CNC punching facilities we can offer designer bracketry at an affordable cost along with a reliable, prompt and professional service. From prototypes to full production runs, blanks or fully fabricated constructions, we offer the complete package. Materials. Mild Steel Aluminium Zintec Galvanised Mild Steel Stainless Steel Brass DMW-180 / 90 Degree Splice Brackets. Our Aluminium / Zintec Splice Plates are used in conjunction with our range of extrusions facilitating accurate alignment of one section to another whether the joint is in-line or at corners. ARCHITECTURAL SHEET METAL Range of Materials. Design Metal Work Ltd has the facilities to offer potential clients a complete package, from punching to welding, we are experienced in producing architectural pressed sheet metal work enclosures, facias and other types of structures in a wide range of materials. Depending on the requirement of each particular job we can offer: Zintec/Mild Steel/Galvanised Steel. The most versatile material in sheet metal offering a wide range of finishes including powder coating and zinc coating. Aluminium. A lighter weight than mild steel but with an increased corrosion resistance. With finishes in powder coating or anodising. Stainless Steel. Allows the use of thinner sheet metal than aluminium while still giving good corrosion resistance and is offered in brushed or mirror finish. Supplying components to major developments. Cribbs Causeway Shopping Mall Bristol. Ashford Euro-Tunnel. Vodafone Headquarters Newbury. Welsh Assembly Hall Cardiff. Terminal 5 Heathrow. Paddington Walk, London ARCHITECTURAL

8 DMW PAGED 25/10/07 12:28 Page 8 7 ARCHITECTURAL METAL WORK Welsh Assembly Cardiff Above is the Welsh Assembly Hall Cardiff for which we rolled the tubular ceiling and supplied structural steel work and bracketry CEILING TRIM DMW-CTH PLASTER EDGE DMW- RSG-12.5 EXTERNAL 38 INTERNAL INTERNAL EXTERNAL 12.5 BARREL VAULT Section Rolling is a Design Metal Work Ltd specialty. We can offer a quick response to your needs: by taking the problem off your hands. by providing you the customer with the solution you need. by delivering on time with our own transport. by maintaining a personal contact. SKIRTING TRIM Our extensive experience in the ceiling and partitioning industry has enabled us to work alongside some of the most well known in the industry. By combining both architectural needs and our rolling experience we are able to offer a solution. 8

9 DMW PAGED 25/10/07 12:28 Page 9