M a g n e t i c D e v i c e s
|
|
|
- Bartholomew Thomas
- 7 years ago
- Views:
Transcription
1 M a g n e t i c D e v i c e s
2 Eurotronix in our inductive components division, offers an extensive catalog of products which perfectly fits any application. As company policy Eurotronix always find those components that fit the customer application, standard components and customize component under customer specs. Apps Main Board. -Transmision/ Reception (Inductive devices) -Ballums. -Common Mode Chokes. -Diferencial Mode Chokes Bifilar communication. Power Supply (Magnetic devices) -Ballums. -Common Mode Chokes. -Diferencial Mode Chokes - HF Transformers End Devices -Transmision/ Reception (Inductive devices) -Ballums. -Common Mode Chokes. -Diferencial Mode Chokes
3 Products: Inductors. LF Transformers. HF Transformers. Standard. Custom Filters Common mode chokes. SMD and through-hole inductors compatible to main suppliers Impedance transformers, Balums, Ethernet.
4 I n d u c t o r s Metal Power Inductors Metal Core SMD Metal Core Wire-wound Ferrite Power Inductor SMD Power Ind SMD Power Ind SMD Power Ind Wire-Wound Wire-Wound MultiLayer Standard Inductors Wire-Wound Wire-Wound chip Multilayer
5 I n d u c t o r s Inductors for high Frequency Applications Multilayer Chip Inductor for High Frequency High-Q Multilayer Chip Inductor for High Frequency Leaded Inductors Axial Leaded Radial Leaded Balun Transformers SMD Balum Transformer
6 ( S M D ) F i l t e r s Ferrite Bead Inductors Multilayer Chip Bead Multilayer Chip Bead Array Multilayer Chip Bead Inductor for power Lines. Chip Bead Inductors for power Lines Leaded Ferrite Beat Leaded Diferencial Choke Multilayer EMI Suppression Filter Multilayer EMI supression filter Common Mode Choke Coils Multilayer Common Mode SMD Common Mode Choke Coils SMD Common Mode Choke Coils
7 SMD Balums F i l t e r s ( B a l u m ) STD Balums Part No. (Ω) ± 25% DCR (Ω) Max. Rated DC Current (ma) SMTBL-6560T SMTBL-6560T SMTBL-6560T SMTBL-6560T SMTBL-6560T Coil Type Core type Core Material Turns ratio Balum RID,RH,RHH low loss Ni-Zn ferrite 2T+1T:2T+1T
8 L i n e F i l t e r s ( C o m m o n M o d e c h o k e s ) Inductance Range Current Range Inductance Range Current Range Inductance Range Current Range 1 to 10 mh 1 to 2.0 A 0,6 to 10 mh 1 to 3.0A 0,6 to 10 mh 0.3 to 2.0A 0.3 to 5.5 mh 2 A 0.6 to 10mH 3.0 to 15A 1.5 to 30mH 0.40 to 1.5A 0.15 to 3 mh 3 to 12 A 0.75 to 33mH 0.3 to 1.8A 0.2 to 1.5 mh 3 to 15 A 0.6 to 10 mh 3 to 8 A 0.2 to 3 mh 3 to 12 A
9 L i n e F i l t e r s ( C o m m o n M o d e c h o k e s ) THR Power Inductor Line Filters
10 Custom Filters L i n e F i l t e r s ( C o m m o n M o d e c h o k e s ) Custom Parts -Based in our customer specifications, our magnetic device suppliers can build custom devices, with competitive prices and excellent lead time. -Eurotronix have an Engineering department that can offer an advice service, to help our customers in their development, also we offer a rapid prototyping for custom samples. Custom Device definition Parameter Value Electrical Diagram - Inductance value - Current (A) - Resonance Frequency (khz) - Mechanical Specs - Pin Distribution - Special requirements - Horizontal and vertical mount TOROIDS, EE and U CORE design chokes, Air core bobbin wound, Radial and axial leaded chokes, Surface mount inductors, Printed circuit mount inductors. High voltage inductor, Shielded ferrite type of inductor.
11 Standard shapes Tr a n s f o r m e r s ( S M P S ) EE1616 EE1312 EE2020 EE2525 ETD3940 Safety Integrated Safety Margin 3,75KV Primary to Secondary Isolation as Standard All parts uses UL listed Material Using TIW (UL E332887;VDE ) Complies with EN Safety Satandards Perfomance Low Loss Ferrite Material Low Leakage Inductance Low Inter-winding capacitance Improved EMC perfomance. Other form factors contact with our technical department
12 Custom HF Transformers Tr a n s f o r m e r s ( S M P S ) Custom Parts -Based in our customer specifications, our magnetic device suppliers can build custom devices, with competitive prices and excellent lead time. -Eurotronix have an Engineering department that can offer an advice service, to help our customers in their development, also we offer a rapid prototyping for custom samples. Custom Device definition Parameter Value Electrical Diagram - Power (W) - Switch frequency (khz) - Primary voltagev1(v) - Secundary VoltageV2,V3,V4 (V) - Output current V2,V3,V4 (ma) - Primary Inductance(H) - Mechanical Specs - Pin Distribution - Special requirements -
13 M a g n e t i c D e v i c e s If you need additional info, contact with our Sales team or directly with our technical department
Custom Products. Magnetic Components. Vishay Dale. www.vishay.com
Magnetic Components SWITCH MODE MAGNETICS AIR CORE INDUCTORS INDUCTIVE PRODUCTS CUSTOM DESIGN AND PRODUCTION has extensive facilities for custom design and production of custom magnetics. Design applications
UNDERSTANDING AND CONTROLLING COMMON-MODE EMISSIONS IN HIGH-POWER ELECTRONICS
Page 1 UNDERSTANDING AND CONTROLLING COMMON-MODE EMISSIONS IN HIGH-POWER ELECTRONICS By Henry Ott Consultants Livingston, NJ 07039 (973) 992-1793 www.hottconsultants.com hott@ieee.org Page 2 THE BASIC
Solar Inverters. Ferrites in Renewable Energies: Solar Inverters. customer requirements. Support and flexibility to design custom product to fulfill
Support and flexibility to design custom product to fulfill customer requirements Optimum ferrite material selection for magnetic applications in the design for cost saving, and performance improvement
Common Mode Choke Filtering Improves CMRR in Ethernet Transformer Applications. Application Note. June 2011
Common Mode Choke Filtering Improves CMRR in Ethernet Transformer Applications June 2011 Application Note Common mode chokes provide an effective EMI filtering solution for Ethernet transformer applications.
How To Make A Power Supply For A Flyback Power Supply
Design Note DN0501/D A 0 to 5 Watt, Low Cost, Off-line Power Supply Device Application Input Voltage Output Power Topology I/O Isolation White Goods, Small NCP151B Instruments, E- NCP41 90 67 Vac 0 to
Understanding SMD Power Inductors. Application Note. July 2011
Understanding SMD Power Inductors July 2011 Application Note Power inductors play an important role in voltage conversion applications by yielding lower core losses. They are also used to store energy,
EMC Countermeasures for In-Vehicle Communication Networks
TDK EMC Technology Practice Section EMC Countermeasures for In-Vehicle Communication Networks TDK Corporation Magnetics Business Group Toshio Tomonari 1 Introduction In recent years, Electronic Control
Inductor and Magnetic Product Terminology
INTRODUCTION IFC LPT ILB IHSM IM IMC LPE TJ LPC IRF IHB The scope of this application note is to define the terminology associated with inductors and their applications. Some of these terms are listed
Amplifier for Small Magnetic and Electric Wideband Receiving Antennas (model AAA-1B)
Amplifier for Small Magnetic and Electric Wideband Receiving Antennas (model AAA-1B) 1. Description and Specifications Contents 1.1 Description 1.2 1.2 Specifications 1.3 1.3 Tested parameters in production
CMS Common mode inductors, surface mount
Technical Data 4313 Effective October 215 Supersedes March 27 Common mode inductors, surface mount pplications EMI filters DC-DC brick power supplies Discrete output supplies Discrete and point-of-use
ILB, ILBB Ferrite Beads
ILB, ILBB Ferrite Beads Electro-Magnetic Interference and Electro-Magnetic Compatibility (EMI/EMC) avid B. Fancher Inductive Products ivision INTROUCTION Manufacturers of electrical and electronic equipment
POWER LINE FILTERS FOR SWITCHING POWER SUPPLIES
POWER INE FITERS FOR SWITCHING POWER SUPPIES ing. Eugen COCA *, prof. dr. ing. Dimitrie AEXA ** * EECTRICA SA - SD SUCEAVA - ROMANIA ** U.T. Gh. Asachi IASI - ROMANIA * SEM0kV - PRAM str. Stefan cel Mare,
Modification of an AOR AR-8600 receiver to tune it with a ACECO FC-3002 frequency finder
Modification of an AOR AR-8600 receiver to tune it with a ACECO FC-3002 frequency finder Matthias DD1US updated June 2 nd 2011 Description of the ACECO FC-3002 unit: The ACECO FC-3002 is a handheld frequency
Improved PFC Boost Choke using a Quasi-Planar Winding Configuration Dave Shonts Schott Corporation 1000 Parkers Lake Road Wayzata, MN 55391
Improved PFC Boost Choke using a Quasi-Planar Winding Configuration Dave Shonts Schott Corporation 1000 Parkers Lake Road Wayzata, MN 55391 Abstract- A novel approach to boost inductor design using a quasi-planar
Title: Low EMI Spread Spectrum Clock Oscillators
Title: Low EMI oscillators Date: March 3, 24 TN No.: TN-2 Page 1 of 1 Background Title: Low EMI Spread Spectrum Clock Oscillators Traditional ways of dealing with EMI (Electronic Magnetic Interference)
Application Note. So You Need to Measure Some Inductors?
So You Need to Measure Some nductors? Take a look at the 1910 nductance Analyzer. Although specifically designed for production testing of inductors and coils, in addition to measuring inductance (L),
A p p l i c a t i o n N o t e
USB Port Protection The USB-Interface might be the most distributed PC interface in the world. The usage in industryapplications is more and more common. Let s have a closer look to the special environmental
Welcome to the combined product training module of Linear Technology and Wurth Electronics about their efficient design solution for DC/DC Flyback
Welcome to the combined product training module of Linear Technology and Wurth Electronics about their efficient design solution for DC/DC Flyback Converters. As leading manufacturers in their industries,
Power Electronic Circuits
Power Electronic Circuits Assoc. Prof. Dr. H. İbrahim OKUMUŞ Karadeniz Technical University Engineering Faculty Department of Electrical And Electronics 1 DC to DC CONVERTER (CHOPPER) General Buck converter
INDUCTOR DESIGN IN SWITCHING REGULATORS
Division of Spang & Company Technical Bulletin BULLETIN SR-1A INDUCTOR DESIGN IN SWITCHING REGULATORS Better efficiency, reduced size, and lower costs have combined to make the switching regulator a viable
Iron Powder Cores for Switchmode Power Supply Inductors. by: Jim Cox
HOME APPLICATION NOTES Iron Powder Cores for Switchmode Power Supply Inductors by: Jim Cox Purpose: The purpose of this application note is to cover the properties of iron powder as a magnetic core material
SELECTION GUIDE. Nominal Input
www.murata-ps.com NKE Series FEATURES RoHS Compliant Sub-Miniature SIP & DIP Styles 3kVDC Isolation UL Recognised Wide Temperature performance at full 1 Watt load, 40 C to 85 C Increased Power Density
EMI and t Layout Fundamentals for Switched-Mode Circuits
v sg (t) (t) DT s V pp = n - 1 2 V pp V g n V T s t EE core insulation primary return secondary return Supplementary notes on EMI and t Layout Fundamentals for Switched-Mode Circuits secondary primary
IFI5481: RF Circuits, Theory and Design
IFI5481: RF Circuits, Theory and Design Lecturer: Prof. Tor A. Fjeldly, UiO og NTNU/UNIK [torfj@unik.no] Assistant: Malihe Zarre Dooghabadi [malihezd@ifi.uio.no] Syllabus: Lectured material and examples,
Inductors. AC Theory. Module 3
Module 3 AC Theory What you ll learn in Module 3. Section 3.1 Electromagnetic Induction. Magnetic Fields around Conductors. The Solenoid. Section 3.2 Inductance & Back e.m.f. The Unit of Inductance. Factors
TURNS RATIO 0.1V,10KHz (16-9):(5-8) Inductance 0.1V,10KHz (16-9)
ADSL LINE TRANSFORMERS Matched to Broadcom 6335 and 6338 chipsets With 5V line driver (BMC6301) Designed to meet UL 1950 and EN60950 Supplementary insulation requirement (1-3)=(2-) (5-7)=(6-8) 0.1V,10KHz
Design Considerations for an LLC Resonant Converter
Design Considerations for an LLC Resonant Converter Hangseok Choi Power Conversion Team www.fairchildsemi.com 1. Introduction Growing demand for higher power density and low profile in power converter
MAGNETICS: FERRITES, BEADS and BALUNS
HF OPERATORS MAGNETICS: FERRITES, BEADS and BALUNS by John White VA7JW NSARC HF Operators 1 What s the Problem?! HF Dipoles and coaxial cables have a nasty compatibility problem! Dipoles are balanced structures!
Cost. 13p each. 1.50 each
G-QRP Club components This is a service for G-QRP Club members only 6 pole crystal filter SSB 9MHz 2.2kHz 500 Ohm in/out 12 Polyvaricon capacitors 2 gang - 8 to 140pF & 6 to 60pF (tags marked A & O respectively)
DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD OF INSERTION LOSS MEASUREMENT
INCH-POUND MIL-STD-220C 14 May 2009 SUPERSEDING MIL-STD-220B 24 January 2000 DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD OF INSERTION LOSS MEASUREMENT AMSC N/A FSC EMCS FOREWORD 1. This standard
Chapter 11. Inductors ISU EE. C.Y. Lee
Chapter 11 Inductors Objectives Describe the basic structure and characteristics of an inductor Discuss various types of inductors Analyze series inductors Analyze parallel inductors Analyze inductive
1. Challenges of EMI 2. Typical EMI Sources 3. Low, broadband and high frequency EMI problems
A. EMI 1. Challenges of EMI 2. Typical EMI Sources 3. Low, broadband and high frequency EMI problems B. EMI Related to Magnetics / Ferrites 1. Interesting & unique properties 2. EMI coupling model- How
HOW TO SELECT VARISTORS
HOW TO SELECT VARISTORS We have three alternatives: - selection of the varistors suitable for the operating voltage of the application - calculating the surge current, energy absorption and average power
5. MINIMIZATION OF CONDUCTED EMI. Chapter Five. switch-mode power supply decrease approximately linearly with the increase of the switching
5. MINIMIZATION OF CONDUCTED EMI Chapter Five MINIMIZATION OF CONDUCTED EMI The sizes of the energy storage elements (transformers, inductors, and capacitors) in a switch-mode power supply decrease approximately
Application Note AN:005. FPA Printed Circuit Board Layout Guidelines. Introduction Contents. The Importance of Board Layout
FPA Printed Circuit Board Layout Guidelines By Paul Yeaman Principal Product Line Engineer V I Chip Strategic Accounts Introduction Contents Page Introduction 1 The Importance of 1 Board Layout Low DC
INTEGRATED CIRCUITS DATA SHEET. TDA7000 FM radio circuit. Product specification File under Integrated Circuits, IC01
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 May 1992 GENERAL DESCRIPTION The is a monolithic integrated circuit for mono FM portable radios, where a minimum on peripheral components
Planar versus conventional transformer
Planar versus conventional transformer Majid Dadafshar, Principal Engineer Gerard Healy, Field Application Engineer Pulse, a Technitrol Company Power Division Usually the first step on any power supply
10 3,5. 0,5 x 0,5 0,12 0,16 0,20 0,25 0,32 0,40 0,50 0,70 1,00
storage choke, vertical EE 3 EE 3/XXXX 5 0,5 x 0,5 4,5 pin grid = 3,75 mm privileged series /LI ca. 5 µws EE 3 EE 3-0,/ 00 EE 3-0,/ 500 EE 3-0,0/ 3 EE 3-0,5/ 500 EE 3-0,3/ 00 EE 3-/ 900 EE 3-/ 700 EE 3-0,70/
DS 600. A contact free flux gate based current measurement sensor 600A rms
DS 600 A contact free flux gate based current measurement sensor 600A rms DS 600 is member of the small housing sensor family. The family includes a 200A and a 600A version. 600A rms - 900A peak Maximum
45. The peak value of an alternating current in a 1500-W device is 5.4 A. What is the rms voltage across?
PHYS Practice Problems hapters 8- hapter 8. 45. The peak value of an alternating current in a 5-W device is 5.4 A. What is the rms voltage across? The power and current can be used to find the peak voltage,
Technical Description. Transistor D.C. Chopper Controller Type GS 24 S
Technical Description Transistor D.C. Chopper Controller Type GS 24 S Table of contents 1. Getting started guide 2. General information 2.1. Characteristics 2.2. Accessories 3. Information about the Machine
Input and Output Capacitor Selection
Application Report SLTA055 FEBRUARY 2006 Input and Output Capacitor Selection Jason Arrigo... PMP Plug-In Power ABSTRACT When designing with switching regulators, application requirements determine how
PCMC063T- Power Choke Coil
PCMC063T- Power Choke Coil Features Low loss realized with low DCR 100% lead (Pb) free, RoHS compliant High performance (Isat) realized by metal dust core Low profile: 12.6mm x 13.8mm x 5.0mm Capable of
Selecting IHLP Composite Inductors for Non-Isolated Converters Utilizing Vishay s Application Sheet
VISHAY DALE www.vishay.com Magnetics Selecting IHLP Composite Inductors for Non-Isolated Converters INTRODUCTION This application note will provide information to assist in the specification of IHLP composite
Yaesu FT-847 70 MHz PA output and filter simulations Marc Vlemmings, PA1O - Eindhoven, The Netherlands
Yaesu FT-847 70 MHz PA output and filter simulations Marc Vlemmings, PA1O - Eindhoven, The Netherlands The efficiency of the HF transmitter chain which is also used for 50 MHz and 70 MHz decreases with
A Zero-Voltage Switching Two-Inductor Boost Converter With an Auxiliary Transformer
A Zero-Voltage Switching Two-Inductor Boost Converter With an Auxiliary Transformer Quan Li and Peter Wolfs Central Queensland University Rockhampton Mail Center, QLD 47, Australia Abstract-The two-inductor
Harmonics and Noise in Photovoltaic (PV) Inverter and the Mitigation Strategies
Soonwook Hong, Ph. D. Michael Zuercher Martinson Harmonics and Noise in Photovoltaic (PV) Inverter and the Mitigation Strategies 1. Introduction PV inverters use semiconductor devices to transform the
The ITER Earthing Topology: Mesh-Common Bonding Network
The ITER Earthing Topology: Mesh-Common Bonding Network J. Hourtoule D. Beltran Electrical Engineering Division ITER Organization SOFE Conference, 28 th June 2011, Chicago Page 1 Outline 1. ITER introduction
O WA-120U series IP67. 120W Single Output Switching Power Supply. Features. Aplications
Features UniversalACinput/Fulrange Built-inactivePFCfunction Higheficiencyupto91% Protections:Shortcircuit/Overcurent/ Overvoltage/Overtemperature Fanlesdesign,colingbyfreairconvection Colingbyfreairconvection
Application Note TMA Series
1W, SIP, Single & Dual Output DC/DC Converters Features SIP Package with Industry Standard Pinout Package Dimension: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 5V&12V Models 19.5 x 10.2 x 7.1 mm (0.77 x
RoHS APPROVAL SHEET. ituner 12V/6.6A SERIES NO. (E17) EA10953A. ( ) Edac Power Electronics (Suzhou) Co., Ltd. 59 No.59, Chang Sheng Road, Sheng Pu,
APPROVAL SHEET CUSTOMER ituner CUSTOMER P/N DESCRIPTION EDAC MODEL 12V/6.6A SERIES NO. (E17) EA10953A DATE 2010-06-22 REVISION 0 APPROVED DESIGN PREPARE RoHS CONCLUSION APPROVED CONDITON CUSTOMER S APP
40 Series - Miniature PCB/Plug-in relays 8-10 - 16 A. Features 40.31 40.51 40.52
Features 40.31 40.51 40.52 1 & 2 Pole relay range 40.31-1 Pole 10 A (3.5 mm pin pitch) 40.51-1 Pole 10 A (5 mm pin pitch) 40.52-2 Pole 8 A (5 mm pin pitch) PCB mount - direct or via PCB socket 35 mm rail
Whale 3. User Manual and Installation Guide. DC Servo drive. Contents. 1. Safety, policy and warranty. 1.1. Safety notes. 1.2. Policy. 1.3. Warranty.
Whale 3 DC Servo drive User Manual and Installation Guide Contents 1. Safety, policy and warranty. 1.1. Safety notes. 1.2. Policy. 1.3. Warranty. 2. Electric specifications. 2.1.Operation ranges. 3. Connections
An equivalent circuit of a loop antenna.
3.2.1. Circuit Modeling: Loop Impedance A loop antenna can be represented by a lumped circuit when its dimension is small with respect to a wavelength. In this representation, the circuit parameters (generally
Module 11: Conducted Emissions
Module 11: Conducted Emissions 11.1 Overview The term conducted emissions refers to the mechanism that enables electromagnetic energy to be created in an electronic device and coupled to its AC power cord.
Evaluating AC Current Sensor Options for Power Delivery Systems
Evaluating AC Current Sensor Options for Power Delivery Systems State-of-the-art isolated ac current sensors based on CMOS technology can increase efficiency, performance and reliability compared to legacy
Technical Specification for 5VDC/2A +12VDC/2A Adapter
Technical Specification for 5VDC/2A +12VDC/2A Adapter Contents 1. SCOPE This specification defines the performance characteristics of a grounder,single phase, 34 Watt,2 outputs power supply.this specification
2.996/6.971 Biomedical Devices Design Laboratory Lecture 2: Fundamentals and PCB Layout
2.996/6.971 Biomedical Devices Design Laboratory Lecture 2: Fundamentals and PCB Layout Instructor: Hong Ma Sept. 12, 2007 Fundamental Elements Resistor (R) Capacitor (C) Inductor (L) Voltage Source Current
RX-AM4SF Receiver. Pin-out. Connections
RX-AM4SF Receiver The super-heterodyne receiver RX-AM4SF can provide a RSSI output indicating the amplitude of the received signal: this output can be used to create a field-strength meter capable to indicate
Conducted EMI filter design for SMPS
Conducted EMI filter design for Jukka-Pekka Sjöroos Helsinki University of Technology Power Electronics Laboratory Conducted EMI filter design for Introduction EMI in Common Mode(CM noise Differential
Technical Article. EMC filters for medical devices
Technical Article EMC filters for medical devices September 2010 EMC filters for medical devices Schaffner, the market leader in EMC filters and power quality, has supplemented its proven IEC inlet filter
Application Note AN- 1095
Application Note AN- 1095 Design of the Inverter Output Filter for Motor Drives with IRAMS Power Modules Cesare Bocchiola Table of Contents Page Section 1: Introduction...2 Section 2 : Output Filter Design
4N25 Phototransistor Optocoupler General Purpose Type
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
BPC Series Power Resistors
Resistive Components BPC Series Power Resistors Non-inductive Planar Thick Film Power Resistors Planar thick film Low inductance High frequency operation Vertical mount Low board level temperature 20x
Line Reactors and AC Drives
Line Reactors and AC Drives Rockwell Automation Mequon Wisconsin Quite often, line and load reactors are installed on AC drives without a solid understanding of why or what the positive and negative consequences
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
How To Counter Noise Noise From A Low Voltage Differential Signaling Circuit
TDK EMC Technology Practice Section EMC Countermeasures of Low Voltage Differential Signaling Circuits TDK Corporation Magnetics Business Group Toshio Tomonari 1 Introduction Low Voltage Differential Signaling
Grounding Demystified
Grounding Demystified 3-1 Importance Of Grounding Techniques 45 40 35 30 25 20 15 10 5 0 Grounding 42% Case 22% Cable 18% Percent Used Filter 12% PCB 6% Grounding 42% Case Shield 22% Cable Shielding 18%
WINGLIKE ELECTRONICS CO.,LTD
WINGLIKE ELECTRONICS CO.,LTD SPECIFICATION FOR APPROVAL AC/DC ADAPTOR CUSTOMER: CUSTOMER SPECS INPUT: 100-240V AC 50-60HZ, 5V/2A ADAPTOR OUR MODEL NO.: GM-050200 (UL) E321192 SPECIFICATION NO.: WL1105102
Power supply output voltages are dropping with each
DESIGNER S SERIES Second-Stage LC Filter Design First Inductor by Dr. Ray Ridley First Capacitor Power supply output voltages are dropping with each new generation of Integrated Circuits (ICs). Anticipated
Design of Bidirectional Coupling Circuit for Broadband Power-Line Communications
Journal of Electromagnetic Analysis and Applications, 2012, 4, 162-166 http://dx.doi.org/10.4236/jemaa.2012.44021 Published Online April 2012 (http://www.scirp.org/journal/jemaa) Design of Bidirectional
Variable Frequency Drives - a Comparison of VSI versus LCI Systems
Variable Frequency Drives - a Comparison of VSI versus LCI Systems Introduction TMEIC is a leader in the innovative design and manufacture of large ac variable f requency drive systems. TMEIC has been
CMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters
www.murata-ps.com CMR Series SELECTION GUIDE FEATURES Single or Dual Isolated Outputs 1kVDC or 3kVDC options Wide temperature performance at full 0.75W load -40 C to 85C Industry Standard Pinouts 5V, 12V
AC/DC Power Modules C B. TML Series, 20 & 40 Watt. Features. 20 Watt Models
TML Series, 0 & 0 Watt Features C B Scheme LVD UL 090- Encapsulated power supplies with increased power density Replaces TML and TML 0 series PCB mount or chassis mount with screw terminals Single, dual
AND8147/D. An Innovative Approach to Achieving Single Stage PFC and Step-Down Conversion for Distributive Systems APPLICATION NOTE
An Innovative Approach to Achieving Single Stage PFC and Step-Down Conversion for Distributive Systems APPLICATION NOTE INTRODUCTION In most modern PFC circuits, to lower the input current harmonics and
EMI Conducted Interference
Although the concepts stated are universal, this application note was written specifically for Interpoint products. Switching power converters are natural generators of input narrowband spectral noise
Selecting the Optimal Inductor for Power Converter Applications
Selecting the Optimal Inductor for Power Converter Applications BACKGROUND Today s electronic devices have become increasingly power hungry and are operating at higher switching frequencies, starving for
Voltech DC1000. Precision DC Bias Current Source
DC1000 Precision DC Bias Current Source DC1000 Precision DC Bias Current Source TM Integral Rack Mount Lugs High Contrast Green LED Display Easy Control Rotary Knob Output LED Indicator DC 1000 OUTPUT
Homework #11 203-1-1721 Physics 2 for Students of Mechanical Engineering
Homework #11 203-1-1721 Physics 2 for Students of Mechanical Engineering 2. A circular coil has a 10.3 cm radius and consists of 34 closely wound turns of wire. An externally produced magnetic field of
AN ISOLATED GATE DRIVE FOR POWER MOSFETs AND IGBTs
APPLICATION NOTE AN ISOLATED GATE DRIVE FOR POWER MOSFETs AND IGBTs by J.M. Bourgeois ABSTRACT Power MOSFET and IGBT gate drives often face isolation and high voltage constraints. The gate drive described
Coaxial Transmitting Chokes
Coaxial Transmitting Chokes Jim Brown K9YC Santa Cruz, CA http://audiosystemsgroup.com Understanding Common Mode and Differential Mode Currents on Transmission Lines 1 Differential Mode Current Transmission
Pulsed Power Engineering Diagnostics
Pulsed Power Engineering Diagnostics January 12-16, 2009 Craig Burkhart, PhD Power Conversion Department SLAC National Accelerator Laboratory Diagnostic Techniques and Considerations in Pulsed Power Systems
AVX EMI SOLUTIONS Ron Demcko, Fellow of AVX Corporation Chris Mello, Principal Engineer, AVX Corporation Brian Ward, Business Manager, AVX Corporation
AVX EMI SOLUTIONS Ron Demcko, Fellow of AVX Corporation Chris Mello, Principal Engineer, AVX Corporation Brian Ward, Business Manager, AVX Corporation Abstract EMC compatibility is becoming a key design
Application Note: How to Connect a Lantronix Embedded Module to a Wired Ethernet Port
Application Note: How to Connect a Lantronix Embedded Module to a Wired Ethernet Port This app note applies to the following Lantronix Products: WiPort BG WiPort NR MatchPort BG MatchPort AR XPort Direct+
AND8451/D. Power Stage Design Guidelines for the NCL30000 Single Stage CrM Flyback LED Driver APPLICATION NOTE
AND8/D Power Stage Design Guidelines for the NCL0000 Single Stage CrM Flyback LED Driver Introduction Single stage critical conduction mode (CrM) flyback converters require different design considerations
November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]
![November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]](/thumbs/29/13476958.jpg "November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s November 0 -terminal Filters For signal line MEM series MEM0S MEM0SC MEM0V MEM0F MEM608P 0[0805 inch]* 0[0805 inch] 0[0805 inch] 0[0805 inch] 608[060 inch] * Dimensions Code JIS[EIA]
RF Design Guidelines: PCB Layout and Circuit Optimization
AN 1200.04 Application Note RF Design Guidelines: PCB Layout and Circuit Optimization Copyright Semtech 2006 1 of 22 www.semtech.com 1 Table of Contents 1 Table of Contents...2 1.1 Index of Figures...2
The Antenna Balun. What is this thing and why do I need it?
What is this thing and why do I need it? The Antenna Balun In this chapter we will look at a common component in some transmission systems the balun. It is quite common to see a balun in wire antennas
Series AMLDL-Z Up to 1000mA LED Driver
FEATURES: Click on Series name for product info on aimtec.com Series Up to ma LED Driver Models Single output Model Input Voltage (V) Step Down DC/DC LED driver Operating Temperature range 4ºC to 85ºC
Oscillators. 2.0 RF Sine Wave Oscillators. www.learnabout-electronics.org. Module. RF Oscillators
Module 2 www.learnabout-electronics.org Oscillators 2.0 RF Sine Wave Oscillators What you ll Learn in Module 2 Section 2.0 High Frequency Sine Wave Oscillators. Frequency Control in RF Oscillators. LC
Measurement of Inductor Q with the MSA Sam Wetterlin 3/31/11. Equation 1 Determining Resonant Q from Inductor Q and Capacitor Q
Measurement of Inductor with the MSA Sam Wetterlin 3/31/11 The of an inductor, which is its reactance divided by its internal series resistance, is used as an indication of how well it will perform at
Applications in EMC testing. Outline. Antennas for EMC Testing. Terminology
Antennas for EMC Testing Zhong Chen ETS-Lindgren 1301 Arrow Point Drive Cedar Park, TX 78613 Zhong.Chen@ets-lindgren.com Outline EMC Terms and Definitions Typical EMC Antennas Calibration of EMC Antennas
Electromagnetic Compatibility Considerations for Switching Power Supplies
Electromagnetic Compatibility Considerations Characterization of the EMI problem requires understanding the interference source Switching power supplies generate Electromagnetic Interference (EMI) by virtue
Quality Policy Statement... I.F.C. Introduction... 2 Magnetic Properties of Fair-Rite Materials... 4 Fair-Rite Materials... 6
4th Edition Table of Contents Quality Policy Statement... I.F.C. Introduction... 2 Magnetic Properties of Fair-Rite Materials... 4 Fair-Rite Materials... 6 Board Components EMI Suppression Beads... 24
Printed Circuit Boards. Bypassing, Decoupling, Power, Grounding Building Printed Circuit Boards CAD Tools
Printed Circuit Boards (PCB) Printed Circuit Boards Bypassing, Decoupling, Power, Grounding Building Printed Circuit Boards CAD Tools 1 Bypassing, Decoupling, Power, Grounding 2 Here is the circuit we
Basic Wire Antennas. Part II: Loops and Verticals
Basic Wire Antennas Part II: Loops and Verticals A loop antenna is composed of a single loop of wire, greater than a half wavelength long. The loop does not have to be any particular shape. RF power can
Output Filter Design for EMI Rejection of the AAT5101 Class D Audio Amplifier
The AAT50 is a high efficiency, 2.5W mono class D audio power amplifier. It can be used in portable devices, such as MP4s, cell phones, laptops, GPS and PDAs. The device can work as a filterless class
Which is the best PFC stage for a 1kW application?
Which is the best PFC stage for a 1kW application? Comparison of different PFC stage topologies under an identical design philosophy Ulf Schwalbe/ Marko Scherf ISLE Steuerungstechnik und Leistungselektronik
STF201-22 & STF201-30
Description The STF201 is a combination EMI filter and line termination device with integrated TVS diodes for use on downstream USB ports. It is constructed using a proprietary technology that allows passive