PNEUMATIC RACK AND PINION ACTUATORS

Transcription

1 PNEUMATIC RACK AND PINION ACTUATORS Advanced torque to size ratio

2 Features: Pneumatic Rack and Pinion Actuators 90 Actuation for -way valves (Straight & Angle) 180 Actuation for -way (T-type) valves Actuators comply with industry standards for interface with ISO 11, NAMUR and VDI/VDE 8 Actuated valves are available factory assembled or seperately, actuator and mounting kits Aluminum actuators are available as standard, Stainless Steel and Electric actuators are available upon request Limit switches, proximity sensors, position indicators, pilot valves and other accessories are available upon request Standard Temperature range: - C to 90 C (-.6 F to 19 F) Optional: High Temperature: -0 C to 10 C (- F to 8 F) Low Temperature: -0 C to 80 C (-8 F to 176 F) General Four standard actuator sizes are available upon request: Mini (designator A1 ), Small (designator A ) and 180 actuator (designator AT ), Medium (designator A ), and Large (designator A ). Improved operational speed enables better valve opening and closing control. ATEX certification of Valves-Actuators assemblies is available on request at the time of order quotation. 00 PNEUMATIC RACK AND PINION ACTUATORS

3 Material of Construction H-00 H-6800 H No. H-00 SERIES H-6800 SERIES H-800 SERIES Part Qty. Material Part Qty. Material Part Qty. Material 1 Actuator 1 Al 6-T Actuator 1 Al 6-T Actuator 1 Al 6-T Coupling 1 St.St.16 Coupling 1 St.St.16 Coupling 1 St.St.16 Bracket 1 St.St.0 Bracket 1 St.St.0 Bracket 1 St.St.0 Washer flat St.St.0 Washer flat St.St.0 Washer flat St.St.0 Washer spring 8 St.St.0 Washer spring St.St.0 Washer spring St.St.0 6 Screw 8 St.St.0 Screw St.St.0 Screw St.St.0 7 H-00 1 St.St.16 Panel nut St.St.16 Panel nut St.St H St.St.16 H St.St.16 HAM-LET ADVANCED CONTROL TECHNOLOGY 01

4 H-6800 SERIES H-6800 High Performance Ball Valves features, materials of construction, and technical data are available in the H-6800 valves section. The selection of Valve-Actuator assemblies provided herein is based on: Valve maximum allowable working pressure Ambient temperature (0 to 100 F /10 to 7 C) Actuator fits to valve based on operating pressure of 6 bar, as per table A. To order H-6800 ball valve factory assembled with an actuator, add the actuator designator to the valve part number / description per the below table. Example: H6800SSL1/PSS with standard Double Acting Aluminum Actuator H6800SSL1/PS-A1 To order an actuator and mounting kit for field assembly: Double acting Actuator ordering number: Z-A1 Corresponding mounting kit: Z-6800-MK-1/-F0-F0-A1 Lubricant free Valves: For Spring Return Actuator - select one size bigger then offered in the table below. Example: If the offered actuator in the table is AC, select AC For Double Acting Actuator - please contact your local representative Table 1 Series Ends Size Seats Minimum Actuator Operating Pressure Bar (Psi) H /16 -/8 (mm-10mm) 1/ -/ (1mm18mm) PCTFE Actuator Designators (Factory assembled) Spring Return NO NC (7.) A1O A1C Double Acting A1 Actuator Ordering Code Spring Return Z-A1S Double Acting Z-A1 Mounting Kit Ordering Info Z-6800-MK-1/ -F0-F0-A1 PEEK (7.) AO AC Z-AS Z-6800-MK-1/ -F0-F0-A (7.) A1O A1C A1 Z-A1S Z-A1 Z-6800-MK-1/ -F0-F0-A1 PCTFE (7.) AO AC Z-AS Z-6800-MK-1/ -F0-F0-A A Z-A PEEK (7.) AO AC Z-AS Z-6800-MK-1/ -F0-F0-A H-6800 T-type 1/16 -/8 (mm-10mm) 1/ -/ (1mm-18mm) PCTFE PEEK (7.) ATS ATS AT Z-ATS Z-AT Z-6800-MK- 1/ -F0-F0-A Z-6800-MK-1/ -F0-F0-A Ham-Let ISO 11 mounting kits for H-6800 Series contain: Mounting Kit ordering Information describes interface per ISO 11. for example: Z-6800-MK-1/-F0-F0 complies with: ISO 11 flange types F0-F0 Part Qty Material Coupling 1 St.St 16 Bracket 1 St.St 0 Screw St.St 0 Washer spring St.St 0 Washer flat St.St 0 Panel nut St.St 16 Mounting instructions 1-0 PNEUMATIC RACK AND PINION ACTUATORS

5 H-800 SERIES H-800 One Piece Ball Valves features, materials of construction, and technical data, are available in the H-800 valves section. The selection of Valve-Actuator assemblies provided herein is based on: Valve maximum allowable working pressure Ambient temperature (0 to 100 F / 10 to 7 C) Actuator fits to valve based on operating pressure of 6 bar, as per table A. To order H-800 ball valve factory assembled with an actuator, the actuator designator shall be added to the valve part number / description per the below table. Example: H-800S-SS-L-1/ with standard Spring Return Aluminum Actuator Normally Closed H-800S-SS-L-1/-A1C To order an actuator and mounting bracket kit for field assembly: Spring Return Actuator ordering number: Z-A1S Corresponding mounting bracket kit: Z-800S-MK-F0-F0-A1 Lubricant free Valves: For spring return actuator - select one size bigger then offered in the table below. Example: If the offered actuator in the table is AC, select AC For double acting actuator - Please contact your local representative Table Series H-800 H-800 T-Type Ends Size S Seats Minimum Actuator Operating Pressure Bar (Psi) Actuator Designators (Factory Assembled) Spring Return NO A1O NC A1C Double Acting Actuator Ordering Code Spring Return Double Acting Mounting Kit Ordering info M PFA (7.) A1O A1C A1 Z-A1S Z-A1 Z-800M-MK-F0-F0-A1 L AO AC Z-AS : Z-800L-MK-F0-F0-A : Z-800L-MK-F0-F0-A1 S M L Z-A1S PFA (7.) ATS ATS AT Z-ATS Z-AT Z-800S-MK-F0-F0-A1 Z-800S-MK-F0-F0-A Z-800M-MK-F0-F0-A Z-800L-MK-F0-F0-A Ham-Let ISO 11 mounting kits for H-800 Series contain: Mounting Kit ordering Information describes interface per ISO 11. for example: Z-800M-MK-F0-F0-A complies with: ISO 11 flange types F0-F0 Part Qty Material Coupling 1 St.St 16 Bracket 1 St.St 0 Screw St.St 0 Washer spring St.St 0 Washer flat St.St 0 Panel nut St.St 16 Mounting instructions 1 - HAM-LET ADVANCED CONTROL TECHNOLOGY 0

6 H-00 SERIES H-00 Three Piece Ball Valves features, materials of construction, and technical data, are available in the H-00 valves section. The selection of Valve-Actuator assemblies provided herein is based on: Valve maximum allowable working pressure Ambient temperature (0 to 100 F / 10 to 7 C) Actuator fits to valve based on operating pressure of 6 bar, in accordance with table A. To order H-00 ball valve factory assembled with an actuator, the actuator designator shall be added to the valve part number/description per the below table. Example: H-00-SS-L-/-T with standard Double Acting Aluminum Actuator H-00-SS-L-/-T-A To order an actuator and mounting kit for field assembly: Double Acting Actuator ordering number: Z-A Corresponding mounting kit: Z-00-MK-/ -F0-F0-A Lubricant free Valves: For Spring Return Actuator - select one size bigger then offered in the table below. Example: If the offered actuator in the table is AC, select AC For Double Acting Actuator - please contact your local representative Table Series Ends Size Seats Minimum Actuator Operating Pressure Bar (Psi) H-00S H-00 1/, /8 (6 mm, 10 mm) 1/ -1/ (6 mm-1 mm) / (0 mm) Actuator Designators (Factory Assembled) Spring Return NO NC Double Acting Actuator Ordering Code Spring Return Double Acting Mounting Kit Ordering Info (7.) A1O A1C A1 Z-A1S Z-A1 Z-00-MK-1/ -F0-F0-A1 (7.) AO AC A1 Z-AS Z-A1 : Z-00-MK-1/ -F0-F0-A : Z-00-MK-1/ -F0-F0-A1 St.St. (7.) AO AC A Z-AS Z-A Z-00-MK-1/ -F0-F0-A PEEK (7.) AO AC A Z-AS Z-A : Z-00-MK-1/ -F0-F07-A : Z-00-MK-1/ -F0-F0-A (7.) AO AC A Z-AS Z-A Z-00-MK-/ -F0-F0-A St.St. (7.) AO AC A Z-AS Z-A : Z-00-MK-/ -F0-F0-A : Z-00-MK-/ -F0-F0-A 1 ( mm) PEEK (7.) AO AC A Z-AS Z-A Z-00-MK-/ -F0-F07-A St.St. (7.) AO AC A Z-AS Z-A PEEK (7.) AO AC A Z-AS Z-A : Z-00-MK-1 -F0-F07-A : Z-00-MK-1 -F0-F0-A : Z-00-MK-1 -F0 F07-A : Z-00-MK-1 -F0-F07-A Ham-Let ISO 11 mounting kits for H-00 Series contain: Note: Mounting Kit ordering Information describes interface per ISO 11. For example: Z-00-MK-/-F0-F0 complies with: ISO 11 flange types F0-F0 Part Qty Material Coupling 1 St.St 16 Bracket 1 St.St 0 Screw 8 St.St 0 Washer spring 8 St.St 0 Washer flat St.St 0 Panel nut 1 St.St 16 Mounting instructions 1-0 PNEUMATIC RACK AND PINION ACTUATORS

7 Dimensions for Assembled Actuators - H-800 & H way Valve Series A G B F C D1 D E L Ø 8 M J K Series Body Designator Ends Size Seats Material Actuator Model Units A B C D D1 E F G J K L M H-6800 H-800 1/ 1/ S M L 1/16 -/ 8 (mm-10mm) 1/ -/ (1mm-18mm) 1/16-1/ (mm-6mm) 1/ -/8 (6mm-8mm) /8-1/ (10mm-1mm) PCTFE PEEK PCTFE PCTFE PEEK PFA A1S A1 AS A1 A1S A1 AS A AS A A1S A1 A1S A1 AS A1 mm inch mm inch mm x inch x mm inch mm inch mm inch mm x inch x mm x inch x mm x inch x mm x inch x mm inch mm inch mm inch mm inch mm x inch x mm inch HAM-LET ADVANCED CONTROL TECHNOLOGY 0

8 Dimensions for Assembled Actuators - H-00 SERIES A F G B C E D1 L D Ø8 J K Series Body Designator Ends Size Seats Material Actuator Model Units A B C D D1 E F G J K L H-00S H-00 1/ 1/ / 1/,/8 (6mm, 10mm) 1/ -1/ (6mm- 1mm) / (18mm) St.St. PEEK St.St. PEEK A1S A1 AS A1 AS A AS A AS A AS A AS A mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch PNEUMATIC RACK AND PINION ACTUATORS

9 Dimensions for Assembled Actuators - H-00 SERIES (Cont d ) A F G B C E D1 L D Ø8 J K Series Body Designator Ends Size Seats Material Actuator Model Units A B C D D1 E F G J K L H ( mm) St.St. PEEK AS A AS A mm inch mm inch mm inch mm inch HAM-LET ADVANCED CONTROL TECHNOLOGY 07

10 Dimensions for Assembled 180 Actuators - H-800 T-TYPE & H-6800 T-TYPE SERIES A G B F C E D1 L D Ø 8 OUTLET OUTLET INLET J K Series H-6800 T-type Body Designator 1/ Ends Size 1/16 -/ 8 (mm-10mm) 1/ 1/ -/ (1mm-18mm) Seats Material PCTFE PEEK Actuator Model AST AT AST AT Units A B C D D1 E F G J K L mm inch mm inch mm inch mm inch H-800 T-type S M L 1/16-1/ (mm-6mm) 1/ -/8 (6mm-8mm) /8-1/ (10mm-1mm) PFA AST AT AST AT AST AT mm inch mm inch mm inch mm inch mm inch mm inch PNEUMATIC RACK AND PINION ACTUATORS

11 Aluminum Pneumatic Actuator - Technical Data A1S: DISASSEMBLY SPRING RETURN No. Description Qty Material 1 Cap allen screw 8 AISI-0 stainless steel Double acting cap Aluminum alloy ()+() Cap O-ring N.B.R Piston 1 Polyarilamide Cylinder 1 Aluminum alloy ()+(1) 6 Washer 1 Polyamide 6 7 Spring clip 1 Stainless steel 8 Position indicator 1 Polyacetal 9 Plate O-ring N.B.R. 10 Guide ring 1 Polyacetal + mb 11 Piston O-ring 1 N.B.R. 1 Shaft O-ring 1 N.B.R. 1 Shaft O-ring 1 N.B.R. 1 Preloaded springs 6 DIN-17-c () () 1 Spring return cap 1 Aluminum alloy () + () 16 Shaft 1 Polyamide + S.S.Insert 17 Drive adapter 1 AISI-16 stainless steel 18 Spring return cap washer AISI-0 stainless steel 19 Nut AISI-0 stainless steel 0 Pneumatic connection plate 1 Polyamide + FG 1 Plate allen screw AISI-0 stainless steel Watertightness plane gasket 1 N.B.R A1: 8 7 DOUBLE ACTING 1. Covered with polyamide.. Covered by cataphoresis.. Variable quantity, please see the Spring return torque chart.. Trivalent chrominium passivation.. Polyurethane HAM-LET ADVANCED CONTROL TECHNOLOGY 09

12 Cycle time in (sec) Weight Capacity in litres Model To open To close Kg. Lb. To open To close A1 0,1 0,1 0,6 1. 0,07 0,0 A1S 0,1 0, ,07 Cycle time w/o resistant torque at 6 bar. Dimensions in mm. To calculate the consumption, multiply the above figures by the real working pressure. *For Spring Return Actuator: A = 96.mm (.8 inch) For Double Acting Actuator: A = 76.8mm (.0 inch) DOUBLE ACTING TORQUES A1 Air pressure Bar, PSI, 8 7, 79, , 116 Nm Lb.in SPRING RETURN TORQUES Air torque at indicated pressure Spring A1S, bar Torques, 8 7, 79, , 116 p.s.i N Initial End Initial End Initial End Initial End Initial End Initial End Initial End Initial End 6* Nm Lb.in Nm Lb.in Nm Lb.in Nm Lb.in Nm Lb.in N: Number of springs per side * Standard number of springs 10 PNEUMATIC RACK AND PINION ACTUATORS

13 Aluminum Pneumatic Actuator - Technical Data A: DOUBLE ACTING AS: SPRING RETURN DISASSEMBLY No. Description QTY Material 1 Cap allen screw 8 AISI-0 stainless steel Double acting cap Aluminum alloy ()+() Cap O-ring N.B.R Piston Polyarilamide Cylinder 1 Aluminum alloy ()+(1) 6 Washer 1 Polyamide 6 7 Spring clip 1 Stainless steel 8 Position indicator 1 Polyacetal 9 Plate O-ring N.B.R. 10 Guide ring Polyacetal + mb 11 Piston O-ring N.B.R. 1 Shaft O-ring N.B.R. 1 Shaft O-ring N.B.R. 1 Preloaded springs 1 DIN-17-c () () 1 Base plate (iso-11) 1 Polyamide + FG 16 Shaft 1 Polyamide + S.S.Insert 17 Drive adapter 1 AISI-16 stainless steel 18 Cap washer 8 AISI-0 stainless steel 19 Allen screw AISI-0 stainless steel 0 Nut AISI-0 stainless steel 1 Nut AISI-0 stainless steel Pneumatic connection plate 1 Polyamide + FG Plate allen screw AISI-0 stainless steel Spring returen cap Aluminum alloy ()+() 1. Covered with polyamide.. Covered by cataphoresis.. Variable quantity, please see the Spring return torque chart.. Trivalent chromium passivation.. Polyurethane HAM-LET ADVANCED CONTROL TECHNOLOGY 19 11

14 Model Cycle time in (sec) Weight Capacity in litres To open To close Kg. Lb. To open To close A 0,1 0,1 0,9,0 0,07 0,11 AS 0,1 0,1 1,0 0,07 Cycle time w/o resistant torque at 6 bar. Dimensions in mm. To calculate the consumption, multiply the above figures by the real working pressure. *For Spring Return Actuator: A = 10.mm (. inch) For Double Acting Actuator: A = 101mm (.97 inch) DOUBLE ACTING TORQUES A Air pressure Bar, PSI, 8 7, 79, , 116 Nm 7,9 11, 1,1 1, 17 19,8,9 Lb.in 69, 100 1,8 17, 10, 17, 0,7 SPRING RETURN TORQUES Air torque at indicated pressure Spring AS, bar Torques, 8 7, 79, , 116 p.s.i N Initial End Initial End Initial End Initial End Initial End Initial End Initial End Initial End 6* 10 6,7 7,,1 8,8, 10, 7 1,1 9,8 16, 1,9 Nm 88, 9, 6, 6, 77,9 8,7 91, 6 11,9 86,7 1, 11, Lb.in 8,,8,,8 8,,6 9,7 7 11, 8, 1 11, 17,1 1, Nm 7, 1, 8,7,8 7, 9,6 8,9 6 99,1 7, 1, , 17, Lb.in 7,6, 0,9 6,7, 9, 7,1 10,9 8, 1, 10 1, 1,8 18, 1,9 Nm 6 0,7 9, 8 9, 8,1 8,1 6,8 96, 7, 109,7 88, 1, 11, 16 10,7 Lb.in,,6,, 7,7,8 10, 8,6 11,9 10 1, 11, 16, 1, Nm 8,7 1,9 8,1 1, 68, 1, 9,9 76,1 10, 88, 118,6 101,8 1, 16,6 Lb.in,,,9 8,9 7, 11,7 10,1 1,1 11, 1,6 1 Nm, 1, 8,7, 78,8 6,6 10,6 89, 11,9 101,8 19, 11,1 Lb.in N: Number of springs per side * Standard number of springs 1 PNEUMATIC RACK AND PINION ACTUATORS

15 Aluminum Pneumatic Actuator - Technical Data A: DOUBLE ACTING AS: SPRING RETURN DISASSEMBLY No. Description Qty Material 1 Cap allen screw 8 AISI-0 stainless steel Cap Aluminum alloy () + (6) Cap-O-ring N.B.R. Piston Aluminum alloy () Cylinder 1 Aluminum alloy () + (1) 6 Washer 1 Polyamide 6 7 Spring clip 1 Steel () 8 Position indicator 1 Polyamide 9 Piston guide Polyacetal 10 Guide ring Polyacetal 11 Piston O-ring N.B.R. 1 Shaft O-ring N.B.R. 1 Shaft O-ring N.B.R. 1 Preloaded springs 1 DIN-17-c () () 1 Base plate (iso-11) 1 Polyamide + FG 16 Shaft 1 Steel () 17 Cam 1 Steel () 18 Cap washer 8 AISI-0 stainless steel 19 Allen screw AISI-0 stainless steel 0 Nut AISI-0 stainless steel 1 Plate O-ring N.B.R Nut AISI-0 stainless steel Pneumatic connection plate 1 Polyamide + FG Plate allen screw AISI-0 stainless steel Hexagonal screw AISI-0 stainless steel 6 Nut AISI-0 stainless steel 7 Bushing AISI-0 stainless steel 8 O-ring N.B.R 1. Covered with polyamide.. Covered by cataphoresis.. Covered by nickel -.. Variable quantity, please see the Spring return torque chart.. Trivalent chromium passivation. 6. Covered with polyurethane HAM-LET ADVANCED CONTROL TECHNOLOGY 19 1

16 Cycle time in (sec) Weight Capacity in litres Model To open To close Kg. Lb. To open To close A 0,1 0, ,1 0,18 AS 0, 0, ,1 Cycle time w/o resistant torque at 6 bar. Dimensions in mm. To calculate the consumption, multiply the above figures by the real working pressure. DOUBLE ACTING TORQUES A Air pressure Bar, PSI, 8 7, 79, , 116 Nm Lb.in SPRING RETURN TORQUES Air torque at indicated pressure Spring AS, bar Torques, 8 7, 79, , 116 p.s.i N Initial End Initial End Initial End Initial End Initial End Initial End Initial End Initial End 6* 16, 11,1 9, 11,6 6, 1,9 8, 18, 1,8 17, 17,Nm 16 98, 8,, 10,7,9 1 7, 16,9 11,1 01,8 1 Lb.in 1,8 9, 6,7, 11,1 6,7 1, 8,9 1,6 11, 0,1 1,7, 0,1 Nm 1,1 8, 9, 0, 98, 9, 117,7 78,8 18,1 99,1 177, ,8 177,9 Lb.in 11,1 7,6 8, 1,9 9, 1,1 11,6 17, 1,9 1,9 18, 6,,8 Nm 98, 67, 7,, 11, 8, 1,6 10, ,9 16,9,8 01,8 Lb.in 8,,8,8,1 10, 7,6 1,7 1 16,9 1, 19, 16,,7 1 Nm 7, 1, 1, 7, 91, 67, 10,1 106, 19,6 1,7 169, ,8 18,9 Lb.in,8,6 8,8 1, 10, 16,9 1,7 19,1 16,9 1, 19, Nm 1, 1,9 70,8 1, 110,6 91, 19,6 10, ,6 189, 169,9 Lb.in N: Number of springs per side * Standard number of springs 1 PNEUMATIC RACK AND PINION ACTUATORS

17 Aluminum Pneumatic Actuator - Technical Data A: DOUBLE ACTING AS: SPRING RETURN DISASSEMBLY No. Description Qty Material 1 Cap allen screw 8 AISI-0 stainless steel Cap Aluminum alloy () + (6) Cap-O-ring N.B.R. Piston Aluminum alloy () Cylinder 1 Aluminum alloy () + (1) 6 Washer 1 Polyamide 6 7 Spring clip 1 Steel () 8 Position indicator 1 Polyamide 9 Piston guide Polyacetal 10 Guide ring Polyacetal 11 Piston O-ring N.B.R. 1 Shaft O-ring N.B.R. 1 Shaft O-ring N.B.R. 1 Preloaded springs 1 DIN-17-c () () 1 Cam 1 Steel () 16 Shaft 1 Steel () 17 Plate O-ring N.B.R. 18 Cap washer 8 AISI-0 stainless steel 19 Nut AISI-0 stainless steel 0 Pneumatic connection plate 1 Polyamide + FG 1 Plate allen screw AISI-0 stainless steel Hexagonal Screw AISI-0 stainless steel Nut AISI-0 stainless steel Bushing AISI-0 stainless steel O-ring N.B.R. 1. Covered with polyamide.. Covered by cataphoresis.. Covered by nickel -. Variable quantity, please see the Spring return torque chart.. Trivalent chromium passivation. 6. Covered with polyurethane HAM-LET ADVANCED CONTROL TECHNOLOGY 1

18 Model Cycle time in (sec) Weight Capacity in litres To open To close Kg. Lb. To open To close A 0. 0, ,8 0.7 AS 0, 0, ,8 Cycle time w/o resistant torque at 6 bar. Dimensions in mm. M8 00,8 80 To calculate the consumption, multiply the above figures by the real working pressure. M M6 0 90º 0º 101,6 1,8 9, 18, 17 ø0 F0 ø70 F , 0 ø DOUBLE ACTING TORQUES A Air pressure Bar, PSI, 8 7, 79, , 116 Nm Lb.in SPRING RETURN TORQUES Close M SOLENOID NAMUR NORM 61,7 Open ø1 M6 SHAFT DETAIL 1 0,6 0,6 Air torque at indicated pressure Spring AS, bar Torques, 8 7, 79, , 116 p.s.i N Initial End Initial End Initial End Initial End Initial 19, Initial End Initial End Initial End 6* Nm Lb.in Nm Lb.in Nm Lb.in Nm Lb.in Nm Lb.in N: Number of springs per side * Standard number of springs 16 PNEUMATIC RACK AND PINION ACTUATORS

19 180 Pneumatic Actuator - Technical Data DISASSEMBLY No. Description Qty Material 1 Cap screw 8 Aisi-0 stainless steel Duabel acting cap Aluminium alloy () + () Cap o-ring N.B.R. Piston Aluminium alloy () Cylinder 1 Aluminium alloy () + (1) 6 Washer 1 Polyamide 6 7 Spring clip 1 Stainless Steel () 8 Position indicator 1 Polyacetal 9 Piston guide Polyacetal 10 Guide ring Polyacetal + Mb 11 Piston o-ring N.B.R. 1 Shaft o-ring N.B.R. 1 Shaft o-ring N.B.R. 1 Springs set DIN-17-c () () 1 Base plate (ISO-11) 1 Polyamide + FG 16 Shaft 1 Polyamide + S.S. Insert 17 Drive adapter 1 Aisi-16 stainless steel 18 Cap washer 8 Aisi-0 stainless steel 19 Allen screw Aisi-0 stainless steel 0 Nut Aisi-0 stainless steel 1 Nut Aisi-0 stainless steel Pneumatic connection plate 1 Polyamide + FG Plate allen screw Aisi-0 stainless steel Plate o-ring N.B.R Spring return cap Aluminium alloy () + () AT: AST: DOUBLE ACTING SPRING RETURN (1) Covered with polyamide. () Covered by Cataphoresis. () Variable quantity, please see the Spring return torque chart. () Covered with polyurethane HAM-LET ADVANCED CONTROL TECHNOLOGY 17

20 Cycle time in (sec) Weight Capacity in litres Model To open To close Kg. Lb. To open To close AT AST Cycle time w/o resistant torque at 6 bar. Dimensions in mm. To calculate the consumption, multiply the above figures by the real working pressure. 0. (8.0) (SPRING RETURN) 16. (6.1) (DOUBLE ACTING) 80 (.1) 11 (0.) M M M 0 (1.18) 76.1 (.0) 9 (0.) 7. (1.6) 89. (.) 1. (0.6) 17. (0.69) 0 (0.79) Ø 10 (0.9) Shaft detail 6 (1.) F0 (1.6) F0 8 (0.1) Bottom view 6.7 (0.6) 0 (0.79) 8. (1.9) Upper view (0.16) Indicator screw (0.16) 1 (0.7) DOUBLE ACTING TORQUES Front view AT Air pressure Bar PSI Nm Lb.in (0.9) M 1/" BSPP () Open (1.6) 1/" BSPP () Close Solenoid NAMUR Standard SPRING RETURN TORQUES AST Spring Torques Air torque at indicated pressure bar p.s.i N Initial End Initial End Initial End Initial End Initial End Initial End Initial End Initial End * Nm Lb.in Nm Lb.in Nm Lb.in Nm Lb.in N: Number of springs per side * Standard number of springs 18 PNEUMATIC RACK AND PINION ACTUATORS

21 ACCESSORIES KITS Standard 90 degrees. Aluminum pneumatic actuator, Operating Pressure: max. 8 bar (116 PSI). Standard working temperature - C to 90 C (-.6 F to 19 F) Solenoid valve, attached to the actuator to create an electro pneumatically actuated ball valve. DC V,.W / Way for double acting and spring return. Enclosure IP6 Option for: 110VAC, 0HZ. Option for: /, / Way. Inductive limit switch for visual and electric indication of actuator position voltage: 8V DC, Enclosure IP67 Electric actuator has been designed to control valve with 90 deg rotation 1W, IP66. Option 1: 90-0V, 0/60HZ, 90-0V DC, Option : 1-0V, 0/60HZ, 1-8V DC For more information please contact your local representative. 90 degree Stainless Steel pneumatic actuator, operating pressure max. 8 bar (116 PSI). Standard working temperature - C to 90 C (-.6 F to 19 F) ATEX mechanical limit switch for use in hazardous locations zone, temp range (-0 C to 60 C) (- F to 10 F) (ATEX Inductive limit switch is available as an option). Electro Mechanical limit switch for visual and electric indication of actuator position. Enclosure IP67, voltage: AC: 0V 16A, 1V 16A DC: 0V 0.A, 1V 0.6A, 0V 10V HAM-LET ADVANCED CONTROL TECHNOLOGY 19

22 Ordering information for Factory Assembled Accessories Valve Type A1 HT LSM SVD Actuator Type Temp Range C ( F) Limit Switch Type Solenoid Valve Per Tables (1,,) 6S1 E1 E1D Aluminum Actuator* St.St. Actuator** Electric Actuator** * Please refer to page 0, 0, 0. ** Please contact your Local Representative to fit Actuator to Valve. Blank HT LT Mounting Kits for field assembly of Limit Switches: Actuator Type A1 /A1S A /AS A /AS A /AS Mounting Kit Description Z-LS-MK-A1 Z-LS-MK-A Z-LS-MK-A Z-LS-MK-A Standatd Actuator High Temperature Actuator Low Temperature Actuator Blank LSM LSI LSMAX LSIAX No Limit Switch Electromechanical Limit Swith Inductive Limit Switch Electromechanical Limit Switch ATEX Inductive Limit Switch ATEX Ordering Information for Accessories Kits for field assembly Blank SVA SVD No Solenoid Valve Solenoid Valve (AC) Solenoid Valve (DC) If special cleaning is required, LF / OC will be added in the end, and will refer to the Valve Only. For example: H - 800S-SS - L- 1/ - A1-LSM - OC In case of request for Actuated valve with LS and Solenoid Valve, The order is as follows: Valve, Actuator, LS, Solenoid For example: H - 800S-SS - L- 1/ - A1-LSM-SVD For double mounting actuators, please contact your local representative. Aluminum actuators for filed assembly Electro Mechnical Limit Switch Inductive Limit Switch (Contains one inductive limit switch) Electro Mechnical / Inductive Limit Switch ATEX Stainless Steel Actuator* Electric Actuator* Solenoid Valve / Way Option: /, / Way See Tables (1,,) Z - LSM Z - LSI Z - LSMAX Z - LSIAX Z - 6S1 Z - E1A (AC) Z - E1D (DC) Z - SVA (AC) Z - SVD (DC) * For Stainless Steel Actuator or Electric Actuator Please contact your local representative. Warning! For your safety The system designer and user have the sole responsibility for selecting products suitable for their special application requirements, ensuring their safe and trouble-free installation, operation, and maintenance. Application details, material compatibility and product ratings should all be considered for each selected product. Improper selection, installation or use of products can cause property damage or personal injury. HAM-LET HPA catalog Rev_06 January 01 0 PNEUMATIC RACK AND PINION ACTUATORS