Table of Contents. Accessories
|
|
- Warren Baldwin
- 7 years ago
- Views:
Transcription
1
2 able of Contents Accessories World Fittings NPF/Inch Fittings Metric Fittings NPF Composite Fittings Composite Metric Fittings World Flow Controls Flow Controls Pilot Operated Check Valves Quick Exhaust, Slide, & Shuttle Valves Silencers Mufflers Breather Vent Silencer Inlet Filter Strainer Check Valves ubing
3 World Fittings How to Order INWB Fitting Series INWB =World Inch (All ) NW = World Metric (All ) Fitting Style 103 =Straight 109 = Swivel Elbow 109E = Extended Swivel Elbow 114 =Swivel Branch ee 116 =Swivel Run ee Options (Blank) = BUNA-N O-Ring F = Viton O Ring INW Size 020 = 1/8 021 = 1/4 022 = 3/8 023 = 1/2 Size Inch 108 = 1/8" 532 = 5/32" 104 = 1/4" 516 = 5/16" 308 = 3/8" 102 = 1/2" NW Size 000 = 1/8 001 = 1/4 002 = 3/8 003 = 1/2 Metric 004 = 4mm 005 = 5mm 006 = 6mm 008 = 8mm 010 = 10mm 012 = 12mm * See Fitting Style Charts on pgs 4-7 for available and Configurations Pressure Rating to 265 psi emperature range: -20 F to +176 F (BUNA N O-ring) +230 F (Viton O-ring) diameter: 1/8" to 1/2" 4mm to 12mm size: 1/8" to 1/2" Release ring (Polyacetal or ) Housing (, Nickel Plated) ead bushing (brass) ocking ring (stainless steel) Stop bushing (brass) O-ring (Buna, Viton available) O-ring (eflon, Buna, Viton available) Numatics World IN-Fittings provide extreme versatility in use, which no longer requires the management of different fittings for different thread types or application. Extremely versatile One fitting design for multiple thread types Rapid assembly Requires fewer turns to tighten and seal Re-usable Fittings can be used several times without gasket deterioration Reliable seal Helical thread profile and PFE gasket ensure proper seal Maximum working pressure: 265 PSIG at 68 F (18 bar at 20 C) Conductor compatibility Nylon, Polyurethane, Polyethylene Numatics World read is designed with a helical thread design that represents the envelope for the profile of the NPF, ISO 228/1(BSPP), (G-ap), ISO 7/1(BSP), (JIS B 0202) and (JIS B 0203) thread types. In conjunction with the thread design the seal between the male and female threads is created with a PFE gasket, housed in a groove at the rear of the thread. his gasket seal meets UNI standards. 3
4 INWB103 Male Connector/Inch Release Ring Part Number INWB109 Swivel Elbow/Inch World Fittings D D2 2 H SW SW2 INWB /8 1/ INWB /8 1/ INWB /32 1/ INWB /32 1/ INWB /4 1/ INWB /4 1/ INWB /4 3/ INWB /16 1/ INWB /16 1/ INWB /16 3/ INWB /8 1/ INWB /8 1/ INWB /8 3/ INWB /8 1/ INWB /2 1/ INWB /2 3/ INWB /2 1/ Release Ring Part Number D D1 1 H 2 SW SW1 INWB /8 1/ INWB /8 1/ INWB /32 1/ INWB /4 1/ INWB /4 1/ INWB /4 1/ INWB /16 1/ INWB /8 1/ INWB /8 1/ INWB /8 3/ INWB /8 1/ INWB /2 1/ INWB /2 3/ INWB /2 1/ INWB109E Extended Swivel Elbow/Inch Release Ring Part Number D D1 1 2 H SW SW1 INWB 109E /8 1/ INWB 109E /8 1/ INWB 109E /32 1/ INWB 109E /32 1/ INWB 109E /4 1/ INWB 109E /4 1/ INWB 109E /4 3/ INWB 109E /16 1/ INWB 109E /16 1/ INWB 109E /16 3/ INWB 109E /8 1/ INWB 109E /8 1/ INWB 109E /8 3/
5 INWB114 Swivel Branch ee/inch Release Ring Part Number World Fittings D D1 1 H 2 SW SW1 INWB /8 1/ INWB /8 1/ INWB /32 1/ INWB /4 1/ INWB /4 1/ INWB /4 3/ INWB /16 1/ INWB /16 1/ INWB /8 1/ INWB /8 1/ INWB /8 3/ INWB /8 1/ INWB /2 1/ INWB /2 3/ INWB /2 1/ INWB116 Swivel Run ee/inch Release Ring Part Number D D1 1 H 2 SW SW1 INWB /8 1/ INWB /32 1/ INWB /32 1/ INWB /4 1/ INWB /4 1/ INWB /4 3/ INWB /16 1/ INWB /16 1/ INWB /8 1/ INWB /8 3/ INWB /8 1/ INWB /2 1/ INWB /2 3/ INWB /2 1/
6 NWB103 Male Connector/Metric World Fittings D D D NWB103 D D2 2 H CH CH1 NWB / NWB / CH. NWB / H NWB / NWB / NWB / NWB / F D2 CH.1 NWB / NWB / NWB / NWB / NWB / NWB / NWB / NWB / NWB109 Swivel Elbow/Metric CH. H NWB109 D D1 1 H 2 CH CH1 NWB / Ø NWB / CH.1 NWB / NWB / NWB / NWB / D1 F NWB / NWB / NWB / NWB / NWB / NWB / NWB / NWB / NWB / NWB109E Extended Swivel Elbow/Metric 1 CH. H NWB109E D D1 1 H 2 CH CH1 NWB109E / Ø NWB109E / NWB109E / NWB109E / NWB109E / CH.1 NWB109E / NWB109E / NWB109E / D1 NWB109E / F 6
7 NWB114 Swivel Branch ee/metric World Fittings CH. H Ø D F NWB114 D D1 1 H 2 SW SW1 NWB / NWB / NWB / CH.1 NWB / NWB / NWB / D1 NWB / F NWB / NWB / NWB / NWB / NWB / NWB / NWB116 Swivel Run ee/metric 2 1 CH. H NWB116 D D1 1 H 2 SW SW1 NWB / D1 Ø NWB / NWB / CH.1 NWB / NWB / D NWB / NWB / NWB / NWB / NWB / NWB / NWB / NWB /
8 NPF/Inch Fittings How to Order INB Fitting Series INB = NPF/Inch able ( Release Ring) *IN = NPF/Inch Fitting Style 100 = Union 101 = Bulkhead Union 103 = Male Connector 105 = Female Connector 106 = Union Elbow 107 = Fixed Elbow 109 = Swivel Elbow 109E = Extended Swivel Elbow 110 = Union ee 114 = Swivel Branch ee 116 = Swivel Run ee *118 =Plug *119 = Double Male Union *120 = Stem Adapter 121 = Reducer 122 = Single Banjo 123 = Double Banjo *124 = Single Manifold *125 = Double Manifold 131 = Union Y 132 = Male Y Options (Blank) = BUNA-N O-Ring F = Viton O Ring Size 000 = No 036 = UNF 020 = 1/8 NPF 021 = 1/4 NPF 022 = 3/8 NPF 023 = 1/2 NPF Size 108 = 1/8" 532 = 5/32" 104 = 1/4" 516 = 5/16" 308 = 3/8" 102 = 1/2" 000 = No * See Fitting Style Charts on pgs 9-14 for available and Configurations *Fittings with asterisk only available in IN Fitting Series. All other styles only available in INB Fitting Series Housing (, Nickel Plated) Pressure Rating to 265 psi emperature range: -20 F to +176 F (BUNA N O-ring) +230 F (Viton O-ring) Push-in fittings with NPF s eflon thread sealant diameter: 1/8" to 1/2" size: UNF to 1/2 NPF Release ring () ocking ring (stainless steel) ead bushing (brass) Stop bushing (brass) O-ring (Buna, Viton available) Bushing for Swivel (brass) 8
9 NPF/Inch Fittings INB100 Union Release Ring INB100 D D1 H INB / INB / INB / INB / INB / INB / INB101 Bulkhead Union Release Ring INB103 Male Connector INB101 D1 H SW S MAX INB /8 M11x INB /32 M12x INB /4 M13x INB /16 M16x INB /8 M19x INB /2 M22x Release Ring INB103 D1 D2 1 H SW SW1 INB / UNF / 5/64 INB /8 1/8 NPF /8 5/64 INB /8 1/4 NPF /8 5/64 INB / UNF / 5/64 INB /32 1/8 NPF /16 5/64 INB /32 1/4 NPF /16 5/64 INB / UNF / 5/64 INB /4 1/8 NPF /2 5/32 INB /4 1/4 NPF /2 5/32 INB /4 3/8 NPF /2 5/32 INB /16 1/8 NPF /32 7/32 INB /16 1/4 NPF /32 7/32 INB /16 3/8 NPF /32 7/32 INB /8 1/8 NPF /16 7/32 INB /8 1/4 NPF /16 1/4 INB /8 3/8 NPF /16 1/4 INB /8 1/2 NPF 0/ /16 1/4 INB /2 1/4 NPF /16 1/4 INB /2 3/8 NPF /16 3/8 INB /2 1/2 NPF /16 3/8 INB105 Female Connector Release Ring INB105 D D1 D2 2 H SW INB /8 1/8 NPF /8 INB /8 1/4 NPF /8 INB /32 1/8 NPF /16 INB /32 1/4 NPF /16 INB /4 1/8 NPF /2 INB /4 1/4 NPF /2 INB /16 1/8 NPF /32 INB /16 1/4 NPF /32 INB /8 1/4 NPF /4 INB /8 3/8 NPF /16 9
10 NPF/Inch Fittings INB106 Union Elbow Release Ring INB106 D D1 H SW INB / INB / INB / INB / INB / INB / INB107 Fixed Elbow Release Ring INB107 D D1 1 2 H SW INB /32 1/8 NPF INB /32 1/4 NPF INB /4 1/8 NPF INB /4 1/4 NPF INB /8 1/4 NPF INB /8 3/8 NPF INB109 Swivel Elbow Release Ring INB109 D D1 1 2 H SW SW1 INB / UNF INB /8 1/8 NPF INB /8 1/4 NPF INB / UNF INB /32 1/8 NPF INB /32 1/4 NPF INB / UNF INB /4 1/8 NPF INB /4 1/4 NPF INB /4 3/8 NPF INB /16 1/8 NPF INB /16 1/4 NPF INB /16 3/8 NPF INB /8 1/8 NPF INB /8 1/4 NPF INB /8 3/8 NPF INB /8 1/2 NPF INB /2 1/4 NPF INB /2 3/8 NPF INB /2 1/2 NPF
11 INB109E Extended Swivel Elbow NPF/Inch Fittings Release Ring INB109E D D1 1 2 H SW SW1 INB 109E /8 1/8 NPF INB 109E /8 1/4 NPF INB 109E /32 1/8 NPF INB 109E /4 1/8 NPF INB 109E /4 1/4 NPF INB 109E /4 3/8 NPF INB 109E /16 1/4 NPF INB 109E /8 1/8 NPF INB 109E /8 1/4 NPF INB 109E /8 3/8 NPF INB110 Union ee Release Ring INB110 D D1 H SW INB / INB / INB / INB / INB / INB / INB114 Swivel Branch ee Release Ring INB114 D D1 1 2 H SW SW1 INB / UNF INB /8 1/8 NPF INB /8 1/4 NPF INB / UNF INB /32 1/8 NPF INB /32 1/4 NPF INB /4 1/8 NPF INB /4 1/4 NPF INB /4 3/8 NPF INB /16 1/8 NPF INB /16 1/4 NPF INB /8 1/8 NPF INB /8 1/4 NPF INB /8 3/8 NPF INB /8 1/2 NPF INB /2 1/4 NPF INB /2 3/8 NPF INB /2 1/2 NPF
12 NPF/Inch Fittings INB116 Swivel Run ee Release Ring INB116 D D1 1 2 H SW SW1 INB / UNF INB /8 1/8 NPF INB /8 1/4 NPF INB / UNF INB /32 1/8 NPF INB /32 1/4 NPF INB /4 1/8 NPF INB /4 1/4 NPF INB /4 3/8 NPF INB /16 1/8 NPF INB /16 1/4 NPF INB /8 1/8 NPF INB /8 1/4 NPF INB /8 3/8 NPF INB /8 1/2 NPF INB /2 1/4 NPF INB /2 3/8 NPF INB /2 1/2 NPF IN118 Plug IN118 D IN / IN / IN / IN / IN / IN / IN119 Double Male Union IN119 D1 IN / IN / IN / IN / IN / IN /
13 NPF/Inch Fittings IN120 Stem Adapter IN120 D1 1 2 SW IN /8 1/8 NPF /8 IN /8 1/4 NPF /2 IN /32 1/8 NPF /8 IN /32 1/4 NPF /2 IN /4 1/8 NPF /8 IN /4 1/4 NPF /2 IN /16 1/8 NPF /8 IN /16 1/4 NPF /2 IN /8 1/4 NPF /2 IN /8 3/8 NPF /32 IN /2 3/8 NPF /32 IN /2 1/2 NPF /16 INB121 Reducer Release Ring INB121 1 D D1 H INB /4 1/ INB /4 5/ INB /8 1/ INB /2 1/ INB /2 3/ INB122 Single Banjo Release Ring IN122 A D D1 1 H INB / UNF INB /32 1/8 NPF INB /8 1/4 NPF INB123 Double Banjo Release Ring INB123 A D D1 1 H INB / UNF INB /4 1/8 NPF INB /4 1/4 NPF INB /8 1/4 NPF
14 NPF/Inch Fittings IN124 Single Manifold IN124 2 D1 SW SW1 IN UNF IN /8 NPF IN /4 NPF IN125 Double Manifold IN125 2 D1 SW SW1 IN /8 NPF IN /4 NPF INB131 Union Y Release Ring IN131 H 1 D D1 INB / INB / INB / INB132 Male Y Release Ring INB132 2 H 1 D D1 INB /8 1/8 NPF INB /32 1/8 NPF INB /4 1/8 NPF
15 Metric Fittings How to Order NB Fitting Series *N = Metric NB = Metric ( Release Ring) Size 100 = Union 101 = Bulkhead Union 102 = Male Connector 104 = Male Connector 105 = Female Connector w/o external box 106 = Union Elbow 108 = Swivel Elbow 110 = Union ee 113 = Swivel Branch ee 115 = Swivel Run ee 117 = Union Cross *118 = Plug *119 = Double Male Union *120 = Stem Adapter 121 = Reducer 122 = Single Banjo 123 = Double Banjo *124 = Single Manifold *125 = Double Manifold *Fittings with asterisk only available in N Fitting Series. All other styles only available in NB Fitting Series Options (Blank) = BUNA-N O-Ring F = Viton O Ring Size 000 = 1/8 G 001 = 1/4 G 002 = 3/8 G 003 = 1/2 G 005 = M5 Size 004 = 4mm 005 = 5mm 006 = 6mm 008 = 8mm 010 = 10mm 012 = 12mm 000 = No tube * See Fitting Style Charts on pgs for available and Configurations Release ring () Pressure Rating to 265 psi emperature range: -20 F to +176 F (BUNA N O-ring) +230 F (Viton O-ring) Push-in fittings with G s diameter: 4mm to 12mm size: M5 to 1/2 G Housing (, Nickel Plated) ead bushing (brass) ocking ring (stainless steel) Stop bushing (brass) O-ring (Buna) O-ring (Buna) 15
16 Metric Fittings NB100 Union NB100 D D1 H NB NB NB NB NB NB NB101 Bulkhead Union NB101 External (G) D1 H min. S max. S SW NB M NB M NB M NB M NB M NB M NB102 Male Connector NB102 (G) D D1 H 1 SW SW1 NB / NB / NB / NB / NB / NB / NB / NB / NB / NB / NB / NB / NB / NB / NB / NB104 Male Connector without External Hex NB104 (G) D H 1 SW1 NB M NB M NB M
17 Metric Fittings NB105 Female Connector NB105 (G) D D1 D2 H 1 SW NB M NB / NB M NB / NB / NB / NB / NB / NB / NB / NB / NB / NB / NB106 Union Elbow NB106 D D1 H SW NB NB NB NB NB NB NB108 Swivel Elbow NB108 (G) D D1 H 1 2 SW SW1 NB M NB / NB / NB M NB / NB / NB M NB / NB / NB / NB / NB / NB / NB / NB / NB / NB / NB / NB /
18 Metric Fittings NB110 Union ee NB110 D D1 H SW NB NB NB NB NB NB NB113 Swivel Branch ee NB113 (G) D D1 H 1 2 SW SW1 NB / NB / NB / NB / NB / NB / NB / NB / NB / NB / NB / NB / NB115 Swivel Run ee NB115 (G) D D1 H 1 2 SW SW1 NB / NB / NB / NB / NB / NB / NB / NB / NB / NB / NB / NB / NB117 Union Cross NB117 D D1 H SW NB NB NB NB NB NB
19 Metric Fittings N118 Plug N118 N N N N N N D N119 Double Male Union N119 N N N N N D N120 Stem Adapter N120 (G) D 1 2 SW N M N / N / N / N M N / N / N / N / N / N / N / N / N / NB121 Reducer NB121 from to (1) D D1 H NB NB NB NB NB NB NB NB NB NB NB
20 Metric Fittings NB122 Single Banjo NB122 for Banjo Bolts (A) D D1 H 1 NB / NB M NB / NB / NB / NB / NB / NB123 Double Banjo NB123 for Banjo Bolts (A) D D1 H 1 NB M NB / NB M NB / NB / NB / N124 Single Manifold N124 2 D1 SW SW1 N UNF N /8 NPF N /4 NPF N125 Double Manifold N125 (G) H H1 SW N / N /
21 NPF Composite Fittings How to Order INP Fitting Series INP =NPF/Inch Plastic Fitting Style 100 =Union 103 = Male Connector 106 = Union Elbow 109 = Swivel Elbow 110 = Union ee 114 = Swivel Branch ee 116 = Swivel Run ee 131 = Union Y 132 = Male Y Size 000 = No 036 = UNF 020 = 1/8 NPF 021 = 1/4 NPF 022 = 3/8 NPF 023 = 1/2 NPF Size 532 =5/32" 104 =1/4" 516 =5/16" 308 =3/8" 102 =1/2" * See Fitting Style Charts on pgs for available and Configurations Pressure Rating to 215 psi Vacuum Rating to 29 Inches of Mercury emperature range: -20 F to +140 F Push-in fittings with NPF s eflon thread sealant Release Ring (Plastic) Bushing (Zinc) ocking Ring (Stainless Steel) Body (PB) Packing (NBR) diameter: 1/8" to 1/2" size: UNF to 1/2 NPF Body made of PB Resin 21
22 NPF Composite Fittings INP100 Union H INP100 D H INP / INP / INP / INP / INP / D INP103 Male Connector INP103 1 H SW INP /32 1/8 NPF /16 SW H INP /32 1/4 NPF /16 INP /4 1/8 NPF /2 INP /4 1/4 NPF /16 F INP /4 3/8 NPF /16 INP /16 1/8 NPF /16 1 INP /16 1/4 NPF /16 INP /8 1/8 NPF /16 INP /8 1/4 NPF /16 INP /8 3/8 NPF /16 INP /8 1/2 NPF /8 INP /2 1/4 NPF /8 INP /2 3/8 NPF /8 INP /2 1/2 NPF /8 INP106 Union Elbow INP106 INP / d INP / INP / d INP / INP / Information Information subject to change subject without to change notice. without For notice. ordering For information ordering information regarding or your regarding local sales your office local sales visit office visit 22
23 NPF Composite Fittings INP109 Swivel Elbow H D INP109 D 1 2 H SW INP / UNF /16 INP /32 1/8 NPF /16 1 INP /32 1/4 NPF /16 INP / UNF /2 SW INP /4 1/8 NPF /2 2 F INP /4 1/4 NPF /16 INP /4 3/8 NPF /16 INP /16 1/8 NPF /16 INP /16 1/4 NPF /16 INP /8 1/8 NPF /16 INP /8 1/4 NPF /16 INP /8 3/8 NPF /16 INP /8 1/2 NPF /8 INP /2 1/4 NPF /8 INP /2 3/8 NPF /8 INP /2 1/2 NPF /8 INP110 Union ee H F d D INP110 D H F d INP / INP / INP / INP / INP / INP114 Swivel Branch ee INP114 D 1 2 H SW INP / UNF /16 H INP /32 1/8 NPF /16 D INP /32 1/4 NPF /16 INP / UNF /2 1 INP /4 1/8 NPF /2 2 SW F INP /4 1/4 NPF /16 INP /4 3/8 NPF /16 INP /16 1/8 NPF /16 INP /16 1/4 NPF /16 INP /8 1/4 NPF /16 INP /8 3/8 NPF /16 INP /8 1/2 NPF /8 INP /2 1/4 NPF /8 INP /2 3/8 NPF /8 INP /2 1/2 NPF /8 23
24 NPF Composite Fittings INP116 Swivel Run ee D INP116 D 1 2 H SW INP / UNF /16 H INP /32 1/8 NPF /16 INP /32 1/4 NPF /16 INP / UNF /2 INP /4 1/8 NPF /2 SW F 2 1 INP /4 1/4 NPF /16 INP /4 3/8 NPF /16 INP /16 1/8 NPF /16 INP /16 1/4 NPF /16 INP /8 1/4 NPF /16 INP /8 3/8 NPF /16 INP /8 1/2 NPF /8 INP /2 1/4 NPF /8 INP /2 3/8 NPF /8 INP /2 1/2 NPF /8 INP131 Union Y D F C 1 d INP131 D 1 C F d INP / INP / INP / INP / INP / INP132 Male Y INP132 1 A H d SW 1 H INP /32 1/8 NPF /16 INP /32 1/4 NPF /16 d INP /4 1/8 NPF /2 INP /4 1/4 NPF /16 INP /16 1/8 NPF /16 A SW F INP /16 1/4 NPF /16 INP /8 1/4 NPF /16 INP /8 3/8 NPF /16 INP /2 3/8 NPF /8 24
25 Composite Metric Fittings How to Order NP Fitting Series NP = Metric Plastic Fittings Fitting Style 100 = Union 102 = Male Connector 106 = Union Elbow 108 = Swivel Elbow 110 = Union ee 113 = Swivel Branch ee 115 = Swivel Run ee 131 = Union Y 132 = Male Y Size 000 =1/8 G 001 =1/4 G 002 =3/8 G 003 =1/2 G 005 =M5 Size 004 =4mm 006 =6mm 008 =8mm 010 = 10mm 012 = 12mm * See Fitting Style Charts on pgs for available and Configurations Pressure Rating to 215 psi Vacuum Rating to 29 Inches of Mercury emperature range: -20 F to +140 F Push-in fittings with G s diameter: 4mm to 12mm Release Ring (Plastic) Bushing (Zinc) ocking Ring (Stainless Steel) Body (PB) Packing (NBR) size: M5 to 1/2 G Body made of PB Resin 25
26 NP100 Union Composite Metric Fittings NP100 NP NP NP NP NP NP102 All-Composite Straight Connector SW NP102 (G) 1 SW NP / NP / NP / G NP / NP / NP / NP / NP / NP / NP / NP106 Union Elbow NP106 d NP NP NP d NP NP
27 Composite Metric Fittings NP108 Swivel Elbow H NP108 (G) H 1 2 SW NP M NP / SW ød NP / NP M NP / G NP / NP / NP / NP / NP / NP / NP / NP / NP / NP / NP / NP / NP110 Union ee NP110 d NP NP NP d NP NP NP113 Swivel Branch ee A NP113 (G) D A H 1 2 d SW NP M D NP / H G d SW NP M NP / NP / NP / NP / NP / NP / NP / NP / NP / NP / NP /
28 H World Flow Controls INWB1391C World Flow Control Inch Release Ring H N M INWB1391C M N 1 CH.1 H INB 1391C /8 1/ INB 1391C /32 1/ INB 1391C /4 1/ N 1 CH.1 INB 1391C /4 1/ INB 1391C /16 1/ FI. INB 1391C /8 1/ INB 1391C /16 3/ INB 1391C /8 3/ INWB139C World Flow Control with Knob Inch CH. 2 Release Ring INWB139C c o M N 1 CH.1 H CH.2 INB 139C /8 1/ INB 139C /32 1/ o (Open) c (Close) 1 H N H N M INB 139C /4 1/ INB 139C /4 1/ CH. 1 INB 139C /16 1/ INB 139C /8 1/ FI. INB 139C /16 3/ INB 139C /8 3/ NWB1391C World Flow Control Metric M NWB1391C M N 1 CH.1 H NWB1391C mm 1/ NWB1391C mm 1/ NWB1391C mm 1/ CH.1 NWB1391C mm 1/ NWB1391C mm 1/ FI. NWB1391C mm 3/ NWB1391C mm 3/ NWB139C World Flow Control with Knob Metric M CH.2 NWB1391C c o M N 1 CH.1 H CH.2 NWB139C mm 1/ o (Open) c (Close) NWB139C mm 1/ NWB139C mm 1/ CH.1 NWB139C mm 1/ NWB139C mm 1/ FI. NWB139C mm 3/ NWB139C mm 3/
29 Valves and Flow Controls 60 psi OEM Flow Controls urns of Adjustment 3/8 60 psi 16 1/ / urns of Adjustment Features Knob adjust, screwdriver adjust Specifications emperature Range: 0 to 176 F Maximum Operating Pressure: 265 psi Materials of Construction Body: brass-nickel plated; screw: stainless steel; seals: Buna; release button: oil or brass; adjustment needle: brass INB135C Flow control Release Ring 135C PORS NPF MAX DIMENSIONS 1 2 H D SW SW1 INB 135C / / INB 135C /8 1/ INB 135C / / INB 135C /32 1/ INB 135C /4 1/ INB 135C /4 1/ INB 135C /8 1/ INB 135C /8 3/ INB136C Flow Control with Knob Release Ring 136C PORS NPF MAX DIMENSIONS 1 2 H D SW SW1 INB 136C / / INB 136C /8 1/ INB 136C / / INB 136C /32 1/ INB 136C /4 1/ INB 136C /4 1/ INB 136C /8 1/ INB 136C /8 3/
30 Valves and Flow Controls INP136C Composite Flow Control with Knob CH-1 M INP136C D c o M N 1 C K CH.1 o (open)/ c (Closed) N 2 øk F C D INP136C / UNF /16 INP136C /32 1/8 NPF /16 INP136C / UNF /2 INP136C /4 1/8 NPF /16 INP136C /4 1/4 NPF /16 INP136C /16 1/8 NPF /16 INP136C /16 1/4 NPF /16 INP136C /8 1/4 NPF /16 INP136C /8 3/8 NPF /4 INP136C /2 3/8 NPF /4 INP136C /2 1/2 NPF NP136C Composite Flow Control with Knob M NP136C D M 1 C K CH.1 NP136C M CH-1 C D NP136C / NP136C M NP136C / øk G NP136C / NP136C / NP136C / NP136C / NP136C / NP136C / NP136C / INP139 Composite Inline Flow Control with Knob - Inch INP139 D A E d ød INP139C / D INP139C / INP139C / A E INP139C / INP139C / NP139 Composite Inline Flow Control with Knob - Metric 30 A E ød D NP139 D A E d NP139C mm NP139C mm NP139C mm NP139C mm NP139C mm
Accessories Fittings, Flow Controls, Mufflers, Pressure Switches & Replacement Parts
Accessories Fittings, Flow Controls, Mufflers, Pressure Switches & Replacement Parts www.numatics.com Table of Contents Accessories World Fittings 3-7 NPTF/Inch Tube Fittings 8-14 Metric Fittings 15-20
More informationMetric Composite Push-In Fittings
Metric Composite Push-In Fittings Version 2013 1.0 3058 Ranchview Lane North. Plymouth, MN 55447 Polyconn now offers a Metric fitting composite line to complement our inch composite fittings. They can
More informationDouble-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationFITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread
FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium
More informationSingle sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationHose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
More informationBERMAD Waterworks. Quick Active Check Valve. 700 Series. Model 740Q. Features and Benefits. Major Additional Features
Booster Pump Control Valve Quick Active Check Valve Isolates system from the effects of pump starts and stops for: Solitary single speed pumps Battery of single speed pumps (add & switch) Battery of variable
More informationParts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
More informationBERMAD Waterworks. Surge Anticipating Control Valve. 700 Series. Model 735-M. Features and Benefits. Major Additional Features
Surge Anticipating Control Valve Eliminates surge in all pumping systems: Booster & deep well, single & variable speed Eliminates surge in all distribution networks: Municipal, high-rise buildings, sewage,
More informationWorking Pressure up to 630 bar / 9135 PSI
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30 / 931 630 / 9135
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationElectrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
More informationShut-off & Lockout Valves 1/4" to 1-1/2" port size
Section 16 Shut-off & Lockout Valves 1/4" to 1-1/2" port size Contents T72 Excelon Shut-off & Lockout Valves 1/4", 3/8" Port Sizes....................................ALE-16-2 T73 Excelon Shut-Off & Lockout
More informationBERMAD Waterworks. Pressure Reducing Valve. 700 Series. Model 720. Features and Benefits. Major Additional Features
Pressure Reducing Valve Flow and leakage reduction Cavitation damage protection Throttling noise reduction Burst protection System maintenance savings The Pressure Reducing Valve is a hydraulically operated,
More informationValve systems Base plates, according to standard ISO 5599-1. Brochure
ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure
More informationTY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
More information3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large
More informationFlare Fittings. The World Standard. SAE 45 Flared Fittings... D4. Inverted Flared Fittings... D14. Access Valves... D18
Flare Fittings SAE 45 Flared Fittings... 4 Inverted Flared Fittings... 14 Access Valves... 18 The World Standard Flare Fittings Flare to ale PT 48F ale Connector 481FH ale Connector AVU1 ale Connector
More informationBERMAD Waterworks. Pressure Relief/Sustaining Valve. 700 Series. Model 730. Features and Benefits. Major Additional Features
Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive
More informationPowers Controls TH 192 HC Heating/Cooling Room Thermostat
Powers Controls TH 192 HC Heating/Cooling Room Thermostat Technical Instructions Document No. 155-066P25 TH 192-2 50 60 70 80 70 TH0356R1 60 80 POWERS Description The TH 192 HC thermostats are proportional
More informationORLANDO srl. M P R 50 025 OPTIMA Radial pressure gauges for swimming-pools 0-2,5 Bar
Chiavari (Ge) - Italia Tel.: Italia + 0185 + 38.50.10 Fax: Italia + 0185 + 38.50.11 e-mail: orlando@orlando.it Http://www.orlando.it M R 50...: Radial pressure gauge ø 50 ( available scale in bar: 4, 6,10,12,16
More information4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
More informationFLO W C ONTROLS. OPTIO NS: Electroless Nickel Plated Stem Viton Seals BSPT & Metric O D Tube Connections Knurled A luminum Knob w ith Locknut
A ngle Flo w C ontrols A ngle Flo w Control valves are designed to provide accurate flo w control in a compact, labor saving package. Features like built in push-in fittings, pre-applied thread sealant,
More informationMÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
More informationBERMAD Waterworks. High Pressure, Surge Anticipating Control Valve. 800 Series. Model 835-M. Features and Benefits. Major Additional Features
High Pressure, Surge Anticipating Control Valve Eliminates surge in all pumping systems: Booster & deep well, single & variable speed Eliminates surge in all distribution networks: Municipal, high-rise
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationTransport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.
Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index
More informationPRODUCT CATALOGUE. burnettandhillman.co.uk &HYDRAULIC ADAPTORS. Burnett & Hillman Havyat Road, Wrington, Bristol BS40 5AE United Kingdom
burnettandhillman.co.uk 2014 HYDRAULIC ADAPTORS Burnett Hillman Havyat Road, Wrington, Bristol BS40 5AE United Kingdom PRODUCT CATALOGUE T: +44 (0)1934 862596 F: +44 (0)1934 862616 E: sales@burnettandhillman.co.uk
More informationPowers Controls TH 192 S Single Temperature Room Thermostat
Technical Instructions Document No. 155-065P25 TH 192-1 Powers Controls TH 192 S Single Temperature Room Thermostat 50 60 70 80 TH0355R1 70 80 POWERS Description The TH 192 S thermostats are proportional
More informationMustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
More informationPRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
More informationPowers Controls Free Energy Band TH 193 HC Heating/Cooling Room Thermostat
Document No. 155-068P25 TH 193-4 Powers Controls Free Energy Band TH 193 HC Heating/Cooling Room Thermostat 50 60 70 80 70 TH0356R1 60 80 POWERS Description The TH 193 HC thermostats are proportional dual
More information3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
More informationScraper Passage Indicator. Electrical Indicator. Features
IV Scraper Passage Indicator Bulletin No: 5110.001.03 Date: June 2008 Cross Indexing No: n/a Supersedes: 5110.001.02 (1/06) Flag Indicator Electrical Indicator Options Description TDW s IV Scraper Passage
More informationNewloc Acetal. Plastic Push-to-Connect Fittings. Fluid Transfer Specialists
Newloc Acetal Plastic Push-to-Connect Fittings Fluid Transfer Specialists Newloc Acetal Extremely easy to install no tools necessary Certified by the National Sanitation Foundation (NSF-1 and NSF-1) Instant
More information2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
More informationAIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
More informationValve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
More informationPneu-Edge. Fittings. Features. Materials. Pneumadyne s Stainless Steel Pneu-Edge fittings are suitable for use in industries such as:
Features l Twelve barb sizes l Ten thread sizes l Captured O-ring design l Smaller shank l Smoother tubing approach angle l Solderless joint technology l Larger thru-hole l Consistently sharp barbs Pneu-Edge
More informationVALVES FOR REFRIGERATING SYSTEMS
VALVES FOR REFRIGERATING SYSTEMS FROM QUALITY OUR NATURAL DEVELOPMENT Achieved the goal of fi fty years working in the industry of Refrigeration and Air Conditioning, Castel Quality Range of Products is
More informationGuide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
More informationrelief valves 500 Series Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar)
Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar) How it Works Closed Resilient seal design prevents leakage. Sealing efficiency increase with increased pressure up to cracking pressure.
More informationWorking Pressure - Hose Ends
Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES
More informationAutomated Lubrication Systems Parts & Accessories
Automated Lubrication Systems Parts & Accessories (Truck and Trailer) Groeneveld USA, Inc. 2150 S. Central Expy. Suite 200 McKinney, TX 75070 Tel: 800.586.7283 Fax: 330.225.5213 Groeneveld USA, Inc. 2150
More informationLine-Mounted Valves L Series
Spare Part Kit for Valve Series B1LSAD3 Line-Mounted L Series Accessories Spare Part Kits All Series Valve Series B1LSAD3 40.1609 Incl. O-rings, gaskets, spring or muffl er Spare Part Kit for Valve Series
More informationHYDRAULIC PIPING STANDARD HANDBOOK. Revision 1
HYDRAULIC PIPING STANDARD HANDBOOK Revision 1 Preface We aim to fill a gap in technical literature. At this moment there are no hydraulic piping standards available which cover different pressure classes
More informationBROEN UNiFlEx FiTTiNgs FOR BURNiNg gases OEN OEN ifl ifl FOR FOR BURN BURN gas gas
BROEN UNIFLEX Fittings FOR BURNIN ASES BROEN UniFlex TM Fittings for burning gases BROEN UniFlex TM Fittings for burning gases LAB Table of Contents Content Page Table of Content 2 Product Overview 3 BROEN
More informationDive Rite 200 & 300 Bar Isolator Manifold Service Manual
Dive Rite 200 & 300 Bar Isolator Manifold Service Manual Principal Photography and Text by Pete Nawrocky Copyright 2003 Lamartek Inc. D/B/A Dive Rite 0 Warning This manual is only to be used as a guide
More informationElectro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
More information60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
More informationHOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS ELECTRICAL SAFETY CONTROLS
HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS PNEUMATIC SAFETY CONTROLS BASIC CONTROLS SC3000 - SELF CONTAINED 2 HAND CONTROL - STAND ALONE MODEL SC3300 - SELF CONTAINED 2 HAND CONTROL - PRESS READY
More informationCylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
More informationSQUARE D INDUSTRIAL CONTROL PRODUCTS
SQUARE D INDUSTRIAL CONTROL PRODUCTS CLASS 9012 3a INDUSTRIAL PRESSURE SWITCHES Type A Heavy duty switch for virtually any industrial application involving air, water, steam or oil Bellows, piston and
More informationCheck Valves Valve locator
Check Valves Valve locator Functional Symbol Flow Typical Model Cavity Rating Pressure Page Check valve, direct L/min (USgpm) bar (psi) FPR/4 Inline () 5 (5) - FPR/8 Inline (8) 5 (5) - FPR/ Inline 45 ()
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationUniversal type. Elbow type AS13 1FG-M5 AS23 1FG-01 AS23 1FG-02 AS33 1FG-02 AS33 1FG-03 AS43 1FG-04. Specifications
Speed Controller with One-touch Fitting Stainless Steel Series Elbow Type/Universal Type Series -FG RoHS Stainless specifications for use in corrosive environments. Stainless steel used for metal parts.
More informationOUT. The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter
D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter within the filter preventing oil loss from
More informationPneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationVOYAGER 570G. 744A Sprayer Control
VOYAGER 570G 744A Sprayer Control U S E R M A N U A L U S E R M A N U A L Table of Contents CHAPTER 1 - INTRODUCTION...1 SYSTEM CONFIGURATIONS...1 KIT CONTENTS...3 CONTROL HOUSING ASSEMBLY...5 CHAPTER
More informationGROENEVELD AUTOMATIC GREASING SYSTEMS
GROENEVELD AUTOMATIC GREASING SYSTEMS TWIN Parts & Accessories Book Pumps, Fittings, Injectors, Lining, etc. www.groeneveld-group.com 1 TWIN ELECTRICAL Item Part # Description 1 F113966 Switch 24V 2 F122991
More information6 Crankcase Ventilation
6 Crankcase Ventilation Introduction... 6-3 Crankcase Ventilation Manager (CVM)... 6-5 Introduction... 6-6 CVM280B..................................... 6-7 CVM280T... 6-10 CVM424B....................................
More informationMACHINES RECOVERY SYSTEMS SUPEREVAC CHARGING HOSES VACUUM AND HOSE ADAPTERS, VALVES AND PARTS CHARGING SYSTEMS GAUGES INSTRUMENTS ELECTRONIC
RECOVERY SUPEREVAC 29 RECOVERY 1/4" 4-IN-1 BALL VALVE TOOL For vacuum, charge, cores and recovery 18997 18975 18971 18978 18979 Remove and replace Schrader cores without losing charge. Extra 1/4" side
More informationStainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
More informationMODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
More informationMetric Tube Fittings
Metric Tube Fittings Index Introduction 2 Terms & Conditions 3 Connectors teel 4 tainless teel 22 Tube teel 35 tainless teel 36 Technical ection Assembly Instructions 37-38 Tube pecifications 39-41 Conversion
More informationTAMPERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
TAMPERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1064 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Check the tamping butt lock screw, it must be tightened
More informationVE17 DSP. Model: VE-17DS. Lista Części Polish
Model: VE-17DS Lista Części Polish Spis Treści Handle 3 Base 5 Wiring - Wear and Tear parts 7 DF100-A Foam Generator art no. 50000055 9 Handle VE02 3 Handle VE02 4 Poz Numer katalogowy Iloś Opis 1 VF40104EU
More information4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
More informationFlow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Catalog HY15-352/US Contents Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI NEED VALVES J2A2... C8-2... Needle Valve, Cartridge Type...45/12... 42/6... 5-6 NVH81... C8-2... Needle
More informationExtruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,
More informationCHIPPING HAMMERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
CHIPG HAMMERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1056 Rev A CHIPG HAMMERS TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. On 650 Series tools, tighten the handle
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationTemperature Adaptor. Vacuum Tree
Temperature Adaptor Temperature Adaptor Temperature Adaptor B0N Ford XY on 6 cyl B02N Ford XF on 6 cyl B0N Ford XE-XF 6 cyl B0N Ford 20 Eng. Tree of 2 BN Ford 20 Eng. Tree of BP Ford 20 Eng. Tree of Water
More informationE4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
More informationTITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V
TITAN pt. no.: 02 0000 0143 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationMikrotherm. Manual radiator valves. To be precise.
Manual radiator valves To be precise. Description HEIMEIER Mikrotherm manual radiator valves made of corrosion-resistant gunmetal, with white plastic hand wheel cap, tight-packed with protection film.
More informationNew. absolute filter elements independently tested in the following Institutes: MPH-MPI 02050/7.99/USA 2 COVER INSERT
e s c r i p t i o n MPH and MPI series filters are designed for returnline applications and provide various installation applications. The filters are installed semiimmersed or totally immersed into a
More informationcompressed air conditioning accessories. one stop shop process reliable efficient economical high degree of reusability
Screwdriving technology Automation Air motors Air tools compressed air conditioning and accessories one stop shop process reliable efficient economical high degree of reusability DEPRAG offers a comprehensive
More informationPipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
More informationKF Needle & Gauge Valves
KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low
More informationDANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
More informationMany Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
More informationFILTRATION AMIAD PLASTIC FILTERS, SCREENS & DISCS
4 AMIAD PLASTIC FILTERS, SCREENS & DISCS Max pressure 10.0 Bar, max temperature 60 O 3/4 to 1 1/2 bodies manufactured from polyacetal 2 bodies and above manufactured from polymade and glass fibre 3/4 to
More informationS GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
More informationTYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
More informationType Function Namur Port size Max. air flow Operating pressure Weight
DRN 3 601/DRN PN 5313 701/PN 611 /DRN 5313 121 128 2.8.4.1.1 2.8.2.3 Seite page oldal 161 PNDRN 531 701 3 601 PNDRN 531 121 3 611 DRN 3 128 PN 531 701 DRN 3 601 BlockPneumatikus form flow regulator vezérlésű
More informationP498-2 For Model: NL498D2 PARTS CATALOG. Marine Generators Marine Diesel Engines Land-Based Generators
P498-2 For Model: NL498D2 PARTS CATALOG Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to
More informationWorld Bridge Replacement Parts for EMD 567 and 645 Diesel Engines
40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationBetween Series Adapters
Between Series Adapters Between Series Coaxial Transmission Line Adapters provide convenient transitions between popular series coaxial connectors. The adapter design provides a minimum length consistent
More informationfor ALL your Rupture Disk needs...
for ALL your Rupture Disk needs... Holders s Burst Sensors Alarm Monitoring Systems Transportation Disks Sanitary Disks Explosion Vent Panels Extruder Barrels Special Applications Service Personnel are
More information9013 PUMPTROL Commercial Pressure Switches Type F and 9013 Commercial Pressure Switches Type G. January. Catalog
9013 PUMPTROL Commercial Pressure Switches Type F and 9013 Commercial Pressure Switches Type G Catalog January 07 Contents Commercial Pressure Switches Pressure Switches b Selection..............................................
More informationHigh Flow Air Cleaner Assembly
34-0112 High Flow Air Cleaner Assembly 34-0114 34-1128 34-0113 34-0105 34-0178 Big Sucker Air Filter Kits for Carbureted or Fuel Injected Twin Cam and EV2 Big Twin Models. The all-in-one backing plate
More informationSIMPLAIR PIPING. www.irtools.com 1-800-376-TOOL
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More informationConfidential. Proportional reducer D386 ATEX. Male base connector View from weld side
Proportional reducer D386 ATEX Classification according Article 3.3 of European Directive n 97/23/CE from 29/05/1997 Classification according group II, category 2 and temperature class T4 of ATEX Directive
More informationzamak nitrile rubber self-extinguishing technopolymer aluminum
PS COMBOBOX valves - Valves with compact design: valve body with integrated sub-base - High flexibility: > possibility of choosing fitting dimension (--) according to users needs > manifolds from up to
More informationball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves
2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating
More information