UNIVERSITYOFCALICUT (Engineering Department)

Transcription

1 UNIVERSITYOFCALICUT (Engineering Department) SUPPLYING, INSTALLING, TESTING AND COMMISSIONING OF PASSENGER LIFT AT LANGUAGE BLOCK SPECIFICATIONS and AMC Sl.No. Description Specification A 1 Description of Lift Passenger Automatic 2 No. Of Elevators 01 (MONOSPACE) 3 Type and capacity 5 Passenger 340 Kgs 4 Speed 1 m/s (GEARLESS) 5 Type of Drive V3f 6 Location of Machine room Machine-Room-Less. 7 Travel 10 Meters (Approximately) 8 No. Of Stops 03 (0,1,2) 9 Well Size 1800mm Width x 1500mm Depth 10 Available Well size 1300mm Width x 2100mm Depth 11 Power supply 415 Volts Three - Phase 50 cycles Ac 12 Auxiliary Single Phase 220 V 50 Cycles A.C 13 Car size 950mm Width x 1000 mm Depth 14 Pit Depth Head room Car enclosure Car ceiling Stainless Steel ceiling with CF Lights and fan Car Panels Stainless Steel Vandal proof finish Car Flooring PVC Flooring/Granite flooring by customer Car illumination Florescent light fittings 17 No. Of Entrance One location in front 18 Car entrance Automatic Centre Opening Doors in stainless steel vandal Proof finish with provision for mechanical opening key for emergency with full length infra red light curtains. 19 Door Safety Full length infra Red light curtain 20 Landing entrance Automatic centre opening doors in stainless steel vandal proof finish 21 Clear opening 1000mm Width x 2000 mm height 22 Controls Selective Collective Simplex 23 Car indicator D & P 7 segment 25mm Display Landing indicators D & P 7 segment 25mm Display a) Call registration by High intensity LED luminous push buttons, Two numbers for intermediate landings and single push button for terminal landings with indication for UP and DOWN direction of motion, b) Digital car position and direction indicators at all landings above the entrance with LED display in Ground floor and LED display in all other floors, c) Visual flashing indiaction on all landing for pre - arrival of car. 24 Buttons in Car All buttons in car and all landings should have Braille sign. 25 Infra red door opening system To be provide for entire length of the door

2 26 Ropes Hoisting suspension ropes shall be of steel of suitable size,construction and number as per IS and designed as per IS Part III: 2000 amended till date. Governer ropes shall be of steel. 26 Construction: Design and furnishing of car body work Stainless steel cabinet (scratch proof finish) with push to talk, emergency light, alarm, Stabilizer, LCD display in car & landing, floor announcement system with music, mirror finish ceiling, LED lights, antiskid SS flooring etc. 27 Indications in Car a) Car position b) Call indicator c) Door close/open push button d) Emergency stop button e) Flush mounted switch for fan and light f) Non stop button g) Battery operated emergency lamp with rechargeable batteries. h) Battery operated alarm bell i) Intercom wiring with one master unit with two slaves j) Fireman's switch at main lobby k) Auto attendant control (inside the car) 28 Safeties a) Over speed governor, operated safety gear b) Buffers c) Motor over load protection d) Phase reversal protection e) Other safeties as per ISS f) Single phase preventor g) Final limit switch 29 Levelling Automatic leveling at all landing as per IS 30 Guarantee Company shall carry out free maintenance during warranty period of 36 months which also includes a) Cleaning lift equipment b) Lubrication of all moving parts c) Replacing of lubricating oil when required d) Checking and adjusting contacts e) Replacing fusible item alarm etc. f) Recharging batteries in case of drain/ renewing batteries g ) Replacing /rewinding of all defective parts of the lift including motors and V3F unit. 31 Control Panel Control panel will be dust and vermin proof of sheet metal enclosure 32 Announcement System To provide lift announcement system. 33 Tests At site test as per IS to be carried out and approval from Electrical Inspectorate to be

3 submitted before Handing over. 34 SCOPE OF WORK: a) Supply of lift materials. b) Minor civil works such as construction of buffer block in the pit machine foundation in the machine room, cutting pockets and grounding brackets for the guide rails, grouting boxes for control units in the front side of the wall. c) Scaffolding d) Door frames e) Supporting Steel f) Intercom facilities with one master and two slaves. g) Battery operated Alarm. h) Obtaining Scheme approval as well as energization Certificate from the electrical Inspectorate including preparation of necessary drawing for the same. Necessary fee shall remitted to the Inspectorate by the firm for which no refund will be made from the department including taking insurance for one year as per new lift rule. i) Supply of booklet with complete details of maintenance schedule and control diagram. j) Giving training to department staff for attending trouble shooting. k) Free servicing for 36 months after handing over l) All exposed metal parts shall be properly painted with good quality paint after erection and before commissioing the lift. STANDARD FEATURES INCLUDED 1. Direction & Position indicator in Car 2. Emergency Alarm 3. Full height infra Red Door Curtain 4. Pit ladder 5. Tubular hand Rail. 6. Integral hand winding facility 7. UPS operated emergency light 8. Attended operation 9. Door open and Door close in car 10. Fan switch in car/auto Fan off. 11. Intercom. 12. Mirror on three sides of car.

4 SPECIAL FEATURES INCLUDED 1. Overload indicator with Buzzer. 2. Fireman s drive with 2 phase operation. 3. Lift Announcing System (LAS) 4. Stainless Steel Vandal Proof (Scratch Resistant) finished car interiors and landing doors at all floors. 5. Automatic Rescue Device (ARD). ANNUAL MAINTENANCE CONTRACT FOR 6 YEARS: 1 All inclusive comprehensive maintenance contract of 1 No passenger lift (13 Passenger) having a speed of 1m/sec with V3F drive serving 5 floors including repairs/replacement of all items of required excluding the following. a Main Suspension ropes b Elevator car door and landing door panels/gates c Incoming electrical wiring upto main switches in the machine room d Main switches in the machine room. The servicing shall be attended at least once in a month and the break down calls shall be attended immediately on report. The lift shall be regularly and systematically examined and put to proper condition at all times during the period of contract. Quoted Rate (in figures and words) For Ist Year - Free Service For 2nd Year - Free Service For 3rd Year - Free Service For 4th Year For 5th Year For 6th Year Declaration I/We do hereby declare that we shall carryout the comprehensive maintenance contract of the above elevators for the next 6 year as per the rates quoted in the schedule

5 Name of Bidder LIST OF APPROVED MAKES 1. Kone Elevators India Pvt Ltd 2. Schindler India Pvt Ltd 3. OTIS Elevator Company(India) Pvt Ltd 4. Thyssenkrupp Elevators (India) 5. Mitsubshi Electric 6. Hitachi Or Equivalent.